Core drilling Catalogue Diamond Bits/Drill Rods & Casing/Core Barrels/Accessories
Sandvik diamond product continually evolves with additional or improved designs superseding the published part numbers. Please consult with a Sandvik Professional for the most up-to-date offering and refer to the latest electronic revision to this catalog whenever available. Sandvik reserves the right to Update specifications and part numbers without prior notice. Core drilling, diamond products C2-570ENG:1 is valid from March 30 2016
For further information on
For further information on Core Bits
Core Bits and Core Barrels Contact
Contact
C W Daws
Ray Purser
Sandvik Mining
Sandvik Mining
Global Product Line Manager
Technical Support Diamond Bits
Exploration Coring Tools & Equipment
Exploration Coring Tools & Equipment
Mobile +61 459 813 105
Mobile +61 408 452359
[email protected]
[email protected]
©Sandvik Mining 2016 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries 1 Sandvik Mining Exploration
INDEX
Sandvik Product Range
Page
INDEX
Cover Page
1
Index Index Equipment Tools and Overview Product selection Rock drill Parameters RV200 PCD and RV300 Wedging RV400 and RZ400 Impregnated Core Bits RV400 and RZ400 Data RV500 Surface set Bits and RV600 Reamers RV700 Casing Shoes AXT- BX B B Reamer and BW Casing shoe N N-N2-N3 Reamers and casing shoe N2 N3-NX-NW H H-H3 Reamer and Casing shoe H3-HX HWT P and P Reamer P3 PWT-PW Metric System WL46 WL56 WL66-WL66-3 WL76-WL76-3 T46-T56 T66-T76 T86 T101 Metric Casing Shoe HD74-HD86-HD94 Cleaning Bits Z46
2 3 4 5 7 12 13 14 15 16 17 18 19 20/21 22 23/24 25 26/27 28 29/30 31 32 33 34 35 36 37 38 39 40 41 42
43 43 43 43 43
Z56 Z66 Z76 Conventional System 4c 8c PCD Bit Information Bit Condition Analysis
44 45 46 47-48 49/50/51
2 Sandvik Mining Exploration
3 Sandvik Mining Exploration
Page 52 53 54/55/56 57/68 69/80 81/82 83/85 86/88 89/91 92/94 95/97 98/99 98/99 100/106 107/117 118/126 127/135 136/141 142/146 147 148/153 154/157 158/161 162/163 164/179
INDEX
Core Barrel System Sandvik Core barrel system cover page Sandvik Multifunctional System NSU and HSU Assembly /SU Information NSU/N3SU/N2SU Wireline Core Barrel System HSU/H2SU/H3SU Wireline Core Barrel System Core Barrel and Casing RP621 Series Casing W and HWT Threads RP622 Series Rods Standard Wireline Rods RP623 Series Rods Standard Wireline Rods RP625 Series Rods Heavy Duty Wireline Rods RP630 Series Rods Heavy Duty Wireline Drill Rods Light weight RP635 Series Rods Wireline Drill Rods Light Weight RP662 Series TK Drill Rods RP663 Series TK Drill Rods B Cam Latch N Cam Latch H Cam Latch P Cam Latch Adaptors and Subs Casing Cutters Recovery Taps and Bowen Spear Fishing Tools Water Swivels and hoisting plugs Conventional Core Barrels 4C 8C Wedging Tools Wedging Tools Manual Drill Rod Care and Handling
OVERVIEW
Equipment and tools Overview Exploration drilling is responsible for locating and quantifying the mineralization of a given area. If the initial assessment of the property indicates sufficient evidence, the project is brought to the next step in the cycle for commercialization. This assessment is made possible by gathering detailed information about the geology below the surface through the collection of samples.
As the world’s most complete supplier to the mining and construction industries, Sandvik enjoys a unique position with regards to the early stages of the mining process. Thanks to our worldwide presence, we are always close at hand to provide a full range of products and services for exploration drilling which includes drill rigs, tools, accessories and related sampling equipment for all major exploration applications.
4 Sandvik Mining Exploration
Sandvik Offering
Bit Series
PCD Bit ( Poly Crystalline Diamond )
RV200
Core drilling tools are manufactured to standards
Directional Wedging ( Bits and Tools) RV300
set for a global exploration industry. The original
Impregnated Core Bits
RV400/RZ400
Surface Set Core Bits
RV500
through the ISO 9001 quality process.
Reamers
RV600
Listed below are the more popular sizes/systems
Casing shoes
RV700
Special
RV800
organization to establish these standards was the DCDMA, but now standards are largely controlled
which have been around for over half a century
Bit Size OD mm B N
OD In
ID mm
Hole Core 59.9 2.360 36.4 in mm mm in 75.7 2.980 47.6
ID In 1.442 1.875
N2
75.7
2.980
50.8
2.000
N3
75.7
2.980
45.1
1.775
H
96.1
3.780
63.5
2.500
Core drilling bits
H3
96.1
3.780
61.1
2.406
The bit is the most complicated of the diamond tools
P
122.6
4.830
85.
3.345
P3
122.6
4.830
83
3.270
because so many factors influence its performance and life. It is important to gather as much data as possible in regards to the formation to be drilled.
As the industry has evolved, variations to the Standard systems have been introduced including: • Wireline system which affected the rod and core barrel design and incorporated the use of a Wireline overshot. • Triple-tube system which affected the core barrel and the bit design and allowed for a second split Inner tube to be used so that an undisturbed sample of very broken core could be viewed in its original state. • Thin kerf or light weight systems which effected the design and dimensions of the entire drill string to allow for a larger core sample to be retrieved at increased depths or in similar sized hole. Diamond products This group of tools makes up some of the main consumables on any drilling operation and can include bits, reaming shells (reamers), and casing or rod shoes. Understanding the composition and application is essential to the success of any drilling program 5 Sandvik Mining Exploration
SELECTION
Product Selection
Diamond impregnated bits
Crown (matrix): The crown (or matrix) of an impregnated bit is made
This is the most widely used bit in the industry today.
up of a number of metal powders which are blended
There are a number of variations being offered, but
with selected synthetic diamonds. These materials are
generally speaking the composition is as follows.
then packed into a mold and fused into one mass by the infiltration of molten alloys during a furnacing process. This process also adheres the crown to the
Bit Blank:
Variations of the combination of powders and
The blank is the steel body of the bit. One end is
diamonds are usually identified by its series rating
threaded so that the bit can be connected to the drill
which in turn gives a different wear rate and
string while the other end is bonded to the crown.
resistance to abrasion.
The inner diameter of the blank has been designed to house the core lifter case which acts together with the core lifter as a stop valve to allow the core sample to go in, but not fall back out down the hole. The combination of the bit, core lifter and core lifter case
The rate of wear between the matrix material and the diamonds should be balanced to ensure the best rate
The crown can vary in height from 6 to 16 mm (0.25 to 0.63 in). A typical crown is 12 mm (0.5 in) but it is common for large diameter bits to have shorter crowns.
6 Sandvik Mining Exploration
Drill
Bit
High powered —
There is risk of overfeeding the bit so it
lots of torque and
is best to go with a more durable matrix
thrust
that can withstand the forces created by the drill
Low powered drill
Need a bit that will be able to cut the rock with less effort (torque and/or rotation) — a thin kerf bit which has cut less rock or a bit that will keep exposing new sharp diamonds (free cutting) is best
Selection and application:
RPM (revolutions per minute)
Many things have to be taken into account when
The rotating action of the bit causes the exposed
reviewing the ground conditions to be drilled:
diamonds to cut into the rock mass. It is measured as
• On a scale from very soft to very hard, what are
the rotational velocity of the outside diameter of the
the current conditions?
Bit which has the highest cutting speed in general the
• Does the formation appear to be unconsolidated, fractured, or competent?
More rotation per minute the faster the rate of Penetration. The rotation speed is also important part
• Would it be considered abrasive, coarse, or fine
Of keeping the bit matrix wearing to expose new
Most manufacturers offer a bit selection guide to assist in the selection process once all of the influencing factors have been identified. Settings and operating parameters:
Once the bit has been selected, it is time to set the operating parameters. Some manufacturers provide recommendations which act as a starting point, however rock formations are rarely homogenous, so adjustments are likely required to gain optimal performance. Bit performance
The major factor influencing bit performance is rock hardness. That is why the initial bit selection process is crucial to keeping the bit cutting. Ensuring the right bit is selected will ensure the matrix wears consistently while drilling, which will maximize the performance of the bit. 7 Sandvik Mining Exploration
PARAMETERS
Rock drilling Parameters
PARAMETERS
WOB (weight on bit)
The weight placed on the bit (or bit load) is very much determined by the other conditions found in the hole and also parameters already applied. i.e. rock type, hardness, and competency, RPM, ROP (rate of penetration) and fluid flow. When WOB is excessive: • Abnormal bit wear • Core barrel and rod wear damage • Hole deviation When WOB is not sufficient: • Productivity (penetration) will be slow • The bit will not wear enough to stay sharp • A possibility the bit will polish It is very important to maintain the correct bit weight (feed force + rod weight) for continuous penetration. As depths increase, the amount of rods and therefore rod weight will increase, so the force applied by the drill will have to be adjusted.
ROP (rate of penetration)
The rate of penetration is one of the more important parameters when using impregnated bits. It is essential to find the optimum ROP for the type of rock, drilling conditions, and equipment being used. Once the ideal ROP is obtained it can be maintained by adjusting the WOB and the RPM. Optimum ROP ensures the bit will: • Stay sharp and will not polish • Have extended life
Sandvik Mining Exploration
8
Penetration index - RPC (RPI)
This can help the operator in assessing if the bit is
and ROP. For example: A rotation of 1200 RPM at a penetration rate (ROP) of 15 cm (6 in) per minute is equal to: RPC = 1200/15 = 80 rotations per centimetre (RPI = 1200/6 = 200 rotations per inch)
Typically, a common rule is that 80 – 100 RPC (200 - 250 RPI) is good, although advancements in technology have improved on these values. Flush (flow rate of drilling fluid)
Another critical parameter effecting drilling performance is the flushing or flow of the drilling fluid while drilling. Functions: • Removes the cuttings (rock particles) from the face of the bit and carries them out of the hole • Keeps the bit cool • Lubricates the entire drill string and keeps it clear of cuttings
Sandvik’s recommended flow values for impregnated coring bits . T46/TK46
9 -13 Litres/Min
T56/TK56-42
11-18 Litres/ Min
TK56/TK66/T66
13-20 Litres/Min
TK76/T76/TK76-3
18-27 Litres/Min
TK86/T86
20-30 Litres/Min
T101
25-40 Litres/Min
B
18-27 Litres/Min
N/N2/N3
27 -42 Litres/Min
H/H3
41 -62 Litres/Min
P/P3
61 -94 Litres/Min
9 Sandvik Mining Exploration
PARAMETERS
being over or under fed in relationship to the RPM
PARAMETERS
Rotational speeds
Rock properties
Generally speaking, impregnated bits require
Two parameters which define how easily a rock may
high rotational speeds to achieve an acceptable
be drilled are its strength and its fracture toughness
penetration rate. The recommended speed range will
— they reflect how easily a crack can be formed in
produce a peripheral speed on the outside diameter
the rock and how easily the rock can be expanded.
of the bit between 3-5 m/sec (5-7 ft/sec). Of course
Rock strength depends on its mineral composition.
this is dependent upon whether the drill is capable of
For example, sandstone cemented with calcite has
producing the necessary rotational speeds and if the
low strength because the calcite that binds the grains
hole conditions will allow this speed to be used.
together is weak, whereas granite will have a higher
Given that friction causes heat it is also safe to
strength because there is no continuous weak phase.
deduce that the faster you rotate the bit the hotter it
In the same way quartzite may have a higher strength
will become. Studies have shown that running the bits
than either of these because it is all quartz. However,
faster than recommended speeds can result in changes
quartzite has a lower fracture toughness than granite
to the metallurgical make up of the matrix causing
because there is a continuous medium, the silica
it to change its properties and drill in a different
cement, that allows a fracture to expand. Granite is
manner for which it was designed. If excessive speed
made up of inter-grown crystals with no continuous
and weight on the bit are used, temperatures can
medium and the fracture has to continually keep
reach up to 900°C which will cause the matrix to
crossing crystal boundaries. Basalt has an even
melt resulting in what is commonly referred to as
higher fracture toughness because of its crystalline
burning in the bit. This process can take place in
nature and small crystal size. This means that an
seconds if the correct parameters relating to fluid
expanding fracture meets crystal boundaries more often.
flow, WOB, RPM and ROP are not applied
The following table, Rock types: strength and friability, outlines the strength and friability (inverse to fracture toughness) of some common rock types in terms of mineralogy and mode of origin Rock Type
Compression strength (mpa)
Mineralogy
Friability
Mode of origin
Quartzite High
High 350
60-100% Quartz
High
Sedimentary composed of grains cemented together
Basalt
High 200 - 300
0% Quartz
Low
Fine grained crystalline rock
Granite
Medium 150 - 200
20% quartz 80% silicates
Low
Course grained crystalline rock
Limestone
Low 100 - 150
100% calcite
High
Sedimentary composed of grains cemented together
Dolomite
Low 120 - 175
Calcium Magnesium Carbonate
High
Sedimentary composed of grains cemented together
10 Sandvik Mining Exploration
Generally speaking, the harder the minerals are that
importance in drilling with diamond bits. This is
are found within the rock, the more abrasive it is
the abrasiveness of the rock, which affects both
likely to be. Of the common rock forming minerals
penetration and the life of the bit. The abrasiveness
quartz has a high hardness so rocks which contain
of the rock is controlled by its mineralogical make
large quantities of quartz are abrasive. Sandstone
up, thus a rock which contains many soft minerals
therefore is much more abrasive than basalt, despite
is less abrasive than one which contains many hard
being softer, because it contains in the order of 6%
minerals.
quartz while basalt contains none, being composed
A scale often used within the exploration industry
principally of feldspars.
to identify rock hardness is the MOH’s scale of
From this knowledge of mineralogy and mode
hardness. The table below shows the scale with 1
of origin of rock it is possible to determine, in
being the softest and 10 the hardest
qualitative terms, how it will react to being drilled
The scale is non-linear, being that there is a greater
with a diamond bit. Despite strenuous efforts by
difference in the hardness between diamond and
many people around the world it still cannot be done
corundum, than for example, between fluorite and
in a quantitative way.
calcite. For interests sake the following common objects have the hardness shown: • Finger nail 2.5 • Copper coin 3 • Glass 5-5.5 • Knife blade 5.5-6 • Steel file 6.5-7
MOH’s Scale
of Hardness
Rating
Mineral
Description
1
Talc
Fingernail scratches it easily
2
Gypsum
Fingernail scratches it
3
Calcite
Copper penny scratches it
4
Flourite
Steel knife scratches it easily
5
Apatite
Steel knife scratches it
6
Feldspars
Steel knife does not scratch it easily, but it scratches glass
7
Quartz
Hardest common mineral, scratches steel and glass easily
8
Topaz
Harder than common mineral
9
Corundum
Scratches Topaz
10
Diamond
The hardest of all minerals
11 Sandvik Mining Exploration
PARAMETERS
There is one other rock property which is of
RV200/RV300 SERIES
RV 200 series Poly-crystalline diamond bits Poly-crystalline diamond (PCD) bits are an alternative to tungsten carbide (TC) and surface set bits, when drilling in soft to medium rock formations. PCD bits feature tungsten carbide cutters that have been coated with diamond to provide exceptional wear resistance. Sandvik offers two types of PCD bits: Core bit
High cutter exposure provides good depth of cuts and high penetration rates for speedy core retrieval. Full face bit
The full face bit is used for geological chip retrieval. They can also be used in drilling formations that Contain Methane
RV 300 series Directional and wedging bits The RV300 series of tools are typically used in combination with wedging devices to provide maximum deflection. Tooling consists of items such as surface set wedge reamers, surface set bull nose bits, navi bits and impregnated wedge bits. Wedge bits can also be used to “lift the hole” i.e. inclination
12 Sandvik Mining Exploration
RV/RZ400 SERIES
RV400/RZ400 series Impregnated diamond coring bits Impregnated diamond coring bits In an impregnated drill bit, synthetic diamonds are embedded in a composite metal crown called a matrix. The matrix is key to the cutting properties of the bit as it must be able to retain diamonds as long as they are able to cut but release them as they become worn to allow new sharp diamonds to be exposed. Generally, coarsely grained fractured rock calls for a harder matrix that does not wear fast. While finer grained, homogeneous hard rocks requires a soft matrix that allows for new, sharp diamonds to be exposed quicker. Bit selection chart - RV 400 /RZ 400 series
Face Discharge
Sandvik has developed a series of impregnated diamond coring bits, numbered from 2 to 14, to simplify selection for each geological condition. The lowest number is developed for badly fractured, coarsely grained and abrasive rocks while the highest number is for homogeneous, fine grained nonabrasive rocks. Fluid flow is a critical part of the drilling operation. It flushes the cuttings from the bottom of the hole to the surface and keeps the diamond core bit cool. Sandvik offers a range of waterway configurations for core
13 Sandvik Mining Exploration
Sand Bit
Thin Kerf Turbo
RV/RZ400 SERIES
RV 400/RZ 400 series Bit data
Standard Size Hole Diameter
Core Diameter
MM
In
MM
In
L/M
US gal/ft
MM
In
L/M
US gal/ft
B
59.94
2.360
36.40
1.442
2.82
0.228
11.58
0.46
0.40
0.032
N
75.69
2.980
47.63
1.875
4.50
0.364
13.84
0.55
0.67
0.054
N2
75.69
2.980
50.67
1.995
4.50
0.364
12.32
0.49
0.67
0.054
N3
75.69
2.980
45.09
1.775
4.50
0.364
15.11
0.60
0.67
0.054
H
96.06
3.782
63.50
2.500
7.25
0.586
16.04
0.63
1.04
0.084
H3
96.06
3.782
61.11
2.406
7.25
0.586
17.23
0.68
1.04
0.084
P
122.61
4.827
84.96
3.345
11.81
0.995
18.54
0.73
1.55
0.125
P3
122.61
4.827
83.06
3.270
11.81
0.955
19.49
0.77
1.55
0.125
Size
Hole Volume
Bit Kerf Width
Rod/Hole annulus
Thin Kerf Size Hole Diameter
Core Diameter
MM
In
MM
In
L/M
US gal/ft
MM
In
L/M
US gal/ft
WL46
47.00
1.850
28.80
1.134
1.73
0.140
9.00
0.345
0.27
0.022
WL56
56.80
2.236
39.00
1.535
2.53
0.204
8.75
0.344
0.31
0.025
WL66
67.10
2.642
50.00
1.969
3.54
0.285
8.40
0.331
0.33
0.027
WL66-3
67.10
2.642
46.00
1.811
3.54
0.285
10.40
0.409
0.33
0.027
WL76
76.30
3.004
57.00
2.244
4.57
0.368
9.50
0.374
0.36
0.029
WL76-3
76.30
3.004
51.00
2.008
4.57
0.368
12.50
0.492
0.36
0.029
T46
46.36
1.825
31.90
1.255
1.73
0.140
7.34
0.284
0.27
0.022
T56
56.50
2.220
41.90
1.649
2.53
0.204
7.70
0.287
0.31
0.025
T66
66.36
2.612
51.90
2.043
3.54
0.285
7.23
0.284
0.33
0.27
T76
76.50
3.011
61.90
2.437
4.57
0.368
7.30
0.287
0.36
0.031
T86
86.40
3.401
71.90
2.830
5.06
0.451
7.25
0.285
0.39
0.031
T101
103.35
4.068
83.90
3.303
8.3
0.668
9.72
0.382
0.76
0.061
Size
Hole Volume
Bit Kerf Width
Rod/Hole annulus
Size
14 Sandvik Mining Exploration
Surface set coring bits Surface set coring bits are characterized by a layer of diamonds set on the surface of the crown in a specific pattern. Surface set coring bits can be used for drilling in a wide range of rock types, in general, the superior impregnated core bit technology in recent times provides the driller with greater performance in hard rock drilling applications. Drilling with surface set coring bits can go on continuously until a dramatic increase of the feed pressure is needed to continue the drilling. In most cases this indicates that the diamonds are worn down or crushed, unlike an impregnated core bit, once the diamonds on a surface set bit are found to be worn flat the bit must be discarded. Sandvik
RV 600 series Reaming shells The reaming shell is the component of a drill string used to maintain the correct gauge of the hole. It features a ring around the outer diameter which contains diamonds and/or tungsten carbide inserts which keeps the hole diameter consistent, otherwise there is a risk of the tools getting stuck down the hole. A reaming shell is always placed just behind the bit, but can be used in other positions along the drill string. If a second reaming shell is placed at the other end of the outer tube, it can help to stabilize the core barrel (back end reamer).
15 Sandvik Mining Exploration
RV500/RV600 SERIES
RV 500 series
RV700 SERIES
RV 700 series Casing shoes Casing shoes are used at the end of a casing string in place of an actual bit. They are typically only required to drill through overburden so the composition is much simpler and therefore less expensive. The casing string and shoe are left in the hole to support the walls of a hole in broken ground with the inner diameter large enough to allow free passage of
Sandvik Diamond Products
CORE BIT COMPARISON CHART USE AS A GUIDE ONLY Hardness Mohs
Soft
1 to 3
Rock Type
Rock Characteristics
Soap stone/Limestone Very abrasive coarse grain Shale/Coal highly fractured
SANDVIK
Bly
2
Hobic-AtlasExcore
Fordia
Dimatec
2-4 4-6
Hero 3
D3
2
SSUMX
02, 06ABR,
SSUMX
7AA.6 7AC
4-6 5-7
Hero 7
HR7
SoftMedium
Dolomite/Sepentinite/ Abrasive medium to coarse 3 to 5 Sandstone/Weathered grain comepent to fracture granite/Gneiss
Medium
5 to 6
Basalt/Diorite/Gneiss
Medium grain competent to fractured
06/07 07
06ABR 07ABR
SSUMX 07UMX 09UMX
7AC
5-7 6-8
Hero 9
HR7
Medium Hard
6 to 7
Gabbro/Quartz/ Pegmatite/Diorite/ Andesite
Medium Hard to Hard slightly abrasive to fractured
08/09
06ABR 07ABR
SSUMX 07UMX 09UMX
7AC-F 8A.2
6-8
Hero 10
HR10
Hard
7 to 8
Diorite/Granite/Gneiss/ Medium to fine grain slightQuartzite/Andesite ly abrasive
09 09-11
08ABR 09ABR
07UMX 09UMX 10UMX
11 AC
8-9
Hero 11
HR10 HR12
Hard to Very Hard
9
Glassy Quartzite Rhyolite /Porphyry
Fine grain non abrasive
12-14
09, 09 COM 10 COM
09UMX 10 UMX
10
Hero 14
HR14
Ultra Hard
10
Jaspilite/Charts Ironstone/Sapphire
Very fine grain non abrasive competent
13 14
10 COM
10 UMX
3 4-6
16 Sandvik Mining Exploration
RV400 Series Impregnated Core Bit AXT Size
Series
Face design
Crown Height
Description
Item Number
AXT
U8
Standard
6 mm
Core Bit AXT RV400-06-8U-STD
BG00642148
AXT
Silver Blue
Standard
6 mm
Core Bit AXT RV400-06-S/B STD
BG00643628
RV600 Series Reamer AXT Size
Position
AXT
Front
design Standard
Size MM
Description
48 +/- 0.12
AXT bit box/A rod box Reamer
Item Number BG00641979
RV400 Series Impregnated Core Bit BX Size
Series
Face design
Crown Height
BX
U8
Standard
6 mm
Description Core Bit BX RV400-06-8U-STD
Item Number BG00642151
RV600 Series Reamer BX Size
Position
BX
Front
design Standard
Size MM
Description
59.9 +/- 0.12 BX bit box/B rod box Reamer
Core Spring Size
Description
Item Number
AXT
AXT Core spring
BG00642143
BX
BX Core spring
BG00642144
17 Sandvik Mining Exploration
Item Number BG00641981
AXT-BX SYSTEMS
DIAMOND PRODUCTS — AXT & BX
B SYSTEMS
DIAMOND PRODUCTS — B SYSTEMS
RV300 Series Wedging Bits - B-Size Size
Series
Step Face
Crown Height
B
8
6
6 mm
Wedge Core Bit B RV300-08-06
BF00004671
B
10
6
6 mm
Wedge Core Bit B RV300-10-06
BF00004672
Description
Item Number
RV400 Series Impregnated Bit - B-Size Size
Series
Face Design
Crown Height
B
06/07
STD
12
Core Bit B RV400 06/07 12 STD
BF00001256
B
06/07
STD
16
Core Bit B RV400 06/07 16 STD
BF00005589
B
08/09
STD
12
Core Bit B RV400 08/09 12 STD
BF00001257
B
08/09
STD
16
Core Bit B RV400 08/09 16 STD
BF00005590
B
09/11
STD
12
Core Bit B RV400 09/11 12 STD
BF00001258
B
09/11
STD
16
Core Bit B RV400 09/11 16 STD
BF00005591
B
13
STD
10
Core Bit B RV400
13 10 STD
BF00004698
B
14
STD
10
Core Bit B RV400
14 10 STD
BF00004674
B
06/07
TW
12
Core Bit B RV400 06/07 12 TW
BF00003608
B
06/07
TW
16
Core Bit B RV400 06/07 16 TW
BF00005594
B
08/09
TW
12
Core Bit B RV400 08/09 12 TW
BF00003609
B
08/09
TW
16
Core Bit B RV400 08/09 16 TW
BF00005595
B
09/11
TW
12
Core Bit B RV400 09/11 12 TW
BF00003610
B
09/11
TW
16
Core Bit B RV400 09/11 16 TW
BF00005596
B
06/07
TURBO
16
Core Bit B RV400 06/07 16 TURBO
BF00005599
B
08/09
TURBO
16
Core Bit B RV400 08/09 16 TURBO
BF00005600
B
09/11
TURBO
16
Core Bit B RV400 09/11 16 TURBO
BF00005601
Description
18 Sandvik Mining Exploration
Item Number
RZ400 Series Impregnated Bit - B-Size Size
Series
Face design
Crown Height
Description
Item Number
B
4/6
STD
12
Core Bit B RZ400 4/6
12 STD
BF00008000
B
4/6
STD
16
Core Bit B RZ400 4/6
16 STD
BF00008001
B
07
STD
12
Core Bit B RZ400 07
12 STD
BF00008038
B
07
STD
16
Core Bit B RZ40007
16 STD
BF00008039
B
09
STD
12
Core Bit B RZ400 09
12 STD
BG00620601
B
09
STD
16
Core Bit B RZ400 09
16 STD
BG00620602
B
12/14
STD
12
Core Bit B RZ400 12/14 12 STD
BF00005371
B
12/14
STD
16
Core Bit B RZ400 12/14 16 STD
BF00005592
B
4/6
TW
12
Core Bit B RZ400 4/6
12 TW
BF00008002
B
4/6
TW
16
Core Bit B RZ400 4/6
16 TW
BF00008003
B
07
TW
12
Core Bit B RZ400 07
12 TW
BF00008040
B
07
TW
16
Core Bit B RZ400 07
16 TW
BF00008041
B
09
TW
12
Core Bit B RZ400 09
12 TW
BG00620603
B
09
TW
16
Core Bit B RZ400 09
16 TW
BG00620604
B
12/14
TW
12
Core Bit B RZ400 12/14 12 TW
BF00005372
B
12/14
TW
16
Core Bit B RZ400 12/14 16 TW
BF00005597
B
07
TURBO
16
Core Bit B RZ400 07
16 TURBO
BF00008043
B
12/14
TURBO
16
Core Bit B RZ400 12/14 16 TURBO
BF00005602
RV600 series Reaming shells-B-Size Size
Position
Face Design
Size
B
Front
Standard
59.9 +/- 0.12
Reamer B RV600 STD Front
BF00004425
B
Front
Over size
60.9 +/-0.12
Reamer B RV600 STD Front
BF00004426
B
Back
Standard
59.9 +/- 0.12
Reamer B RV600 STD Backend
BF00004427
B
Back
Over size
60.9 +/- 0.12
Reamer B RV600 O/S Backend
BF00004428
Description
Item Number
RV700 series Casing shoes BW Size
Series
Face Design
Crown Height
Description
BW
02
STD
6 mm
Casing shoe BW RV700-06-02
BF00001446
BW
06
STD
6 mm
Casing shoe BW RV700-06-06
BF00005964
19 Sandvik Mining Exploration
Item Number
B SYSTEMS
DIAMOND PRODUCTS — B SYSTEMS
N SYSTEMS
DIAMOND PRODUCTS — N SYSTEMS
RV200 Series PCD Bits –N-Size
Size
PCD Size
Face design
N
08/08
STD
Crown Height
Description PCD Core Bit N RV200 08/08
Item Number BF00004667
RV300 Series Wedging Bits - N-Size Size
Series
Step Face
Crown Height
N
8
7
6 mm
Wedge Core Bit N RV300-08-06
BF00004688
N
10
7
6 mm
Wedge Core Bit N RV300-10-06
BG00611754
Description
Item Number
RZ300 Series Wedging Bits - N-Devico special Size
Series
Face Design
N
12/14
TURBO
Crown Height
Description
12 mm Wedge Core Bit N RZ400-12/14 12 T
Item Number BG00723246
RV400 Series Impregnated Bit - N-Size Size
Series
Face design
Crown Height
N
06/07
STD
12
Core Bit N RV400 06/07 12 STD
BF00001275
N
06/07
STD
16
Core Bit N RV400 06/07 16 STD
BF00005619
N
08/09
STD
12
Core Bit N RV400 08/09 12 STD
BF00001279
N
08/09
STD
16
Core Bit N RV400 08/09 16 STD
BF00005620
N
09/11
STD
12
Core Bit N RV400 09/11 12 STD
BF00001278
N
09/11
STD
16
Core Bit N RV400 09/11 16 STD
BF00005621
N
13
STD
10
Core Bit N RV400 10 13 STD
BF00004708
N
14
STD
10
Core Bit N RV400 10 14 STD
BF00004709
N
06/07
TW
12
Core Bit N RV400 06/07 12 TW
BF00003630
N
06/07
TW
16
Core Bit N RV400 06/07 16 TW
BF00005624
N
08/09
TW
12
Core Bit N RV400 08/09 12 TW
BF00004058
N
08/09
TW
16
Core Bit N RV400 08/09 16 TW
BF00005625
N
09/11
TW
12
Core Bit N RV400 09/11 12 TW
BF00003631
N
09/11
TW
16
Core Bit N RV400 09/11 16 TW
BF00005626
N
06/07
TURBO
16
Core Bit N RV400 06/07 16 TURBO
BF00005629
N
08/09
TURBO
16
Core Bit N RV400 06/07 16 TURBO
BF00005630
N
09/11
TURBO
16
Core Bit N RV400 09/11 16 TURBO
BF00005631
Description
20 Sandvik Mining Exploration
Item Number
RZ400 Series Impregnated Bit - N-Size Size
Series
Face design
Crown Height
Description
Item Number
N
4/6
STD
12
Core Bit N RZ400 4/6 12 STD
BF00008006
N
4/6
STD
16
Core Bit N RZ400 4/6 16 STD
BF00008007
N
07
STD
12
Core Bit N RZ400 07 12 STD
BF00008044
N
07
STD
16
Core Bit N RZ400 07
16 STD
BF00008045
N
09
STD
12
Core Bit N RZ400 09 12 STD
BG00553060
N
09
STD
16
Core Bit N RZ400 09 16 STD
BG00620605
N
12/14
STD
12
Core Bit N RZ400 12 /14 12 STD
BF00005373
N
12/14
STD
16
Core Bit N RZ400 12/14 16 STD
BF00005622
N
4/6
TW
12
Core Bit N RZ400 4/6 12 TW
BF00008008
N
4/6
TW
16
Core Bit N RZ400 4/6 16 TW
BF00008009
N
07
TW
12
Core Bit N RZ400 07
12 TW
BF00008046
N
07
TW
16
Core Bit N RZ400 07
16 TW
BF00008047
N
09
TW
12
Core Bit N RZ400 09
12 TW
BG00620606
N
09
TW
16
Core Bit N RZ400 09
16 TW
BG00620607
N
12/14
TW
12
Core Bit N RZ400 12/14 12 TW
BF00005374
N
12/14
TW
16
Core Bit N RZ400 12/14 16 TW
BF00005627
N
07
TURBO
16
Core Bit N RZ400 07 16 TURBO
BF00008049
N
12/14
TURBO
16
Core Bit N RZ400 12/14 16 TURBO
BF00005632
RV500 series Surface Set Bit -N-Size Size
Diamond Steps Size
Ct Weight / Grade
Description
Item Number
N
40/60 spc
6
17
AA
Core Bit N RV500 40/60 AA 6 STEP
BF00004635
N
20/30 spc
4
21
A
Core Bit N RV500 20/30 AA 4 STEP
BG00611760
N
16/30spc
4
15.8
AA
Core Bit N RV500 16/30 AA 4 STEP
BG00641959
21 Sandvik Mining Exploration
N SYSTEMS
DIAMOND PRODUCTS — N SYSTEMS
N SYSTEMS
DIAMOND PRODUCTS — N SYSTEMS RV600 Series Reaming Shell –N-N2-N3-Size Size
Position
Face Design Size
Description
Item Number
N
Front
Standard
75.7 +/- 0.12
Reamer N RV600 STD Front
BF00004626
N
Front
Over size
76.7 +/-0.12
Reamer N RV600 STD Front
BF00004434
N
Front
Bit size
75.3 +/- 0.12
Reamer N RV600 Bit Size Front
BF00004624
N
Back
Standard
75.7 +/- 0.12
Reamer N RV600 STD Backend
BF00004435
N
Back
Over size
76.7 +/- 0.12
Reamer N RV600 0/S Backend
BF00004436
N
Inline
Over Size
76.7 +/- 0.12
Reamer N RV600 0/S Inline
BG00787127
RV700 series Casing and Spud Shoes-N Rod -Size Size
Series
Face Design
Crown Height
N
06
STD
6 mm
Rod shoe N RV700 06 06
BF00004469
N
06
STD
6 mm
Rod shoe N HD RV700 06 06
BF00005507
N
06
STD
6 mm
Rod shoe Spud RV700 06 06
BF00004731
Description
Item Number
RV700 series Casing Reaming Shoe-N Rod -Size Size
Series
Face Design
Crown Height
Description
Item Number
N
10
STD
6 mm
Rod shoe N RV700 75.6 od x 57 id / Reaming over B size Rod
BF00005195
22 Sandvik Mining Exploration
N2 SYSTEMS
DIAMOND PRODUCTS — N2—SYSTEMS
RV300 Series Wedging Bits - N2-Size Size
Series
Step Face
Crown Height
N2
8
7
6 mm
Wedge Core Bit N2 RV300-08-06
BG00611755
N2
10
7
6 mm
Wedge Core Bit N2 RV300-10-06
BG00611756
N2
14
3 Internal step
6 mm
Wedge Core Bit N2 RV300–14
BF00004691
Description
Item Number
RV400 Series Impregnated Bit - N2 - Size Size
Series
Face design
Crown Height
N2
06/07
STD
12
Core Bit N2 RV400 06/07 12 STD
BF00001282
N2
06/07
STD
16
Core Bit N2 RV400 06/07 16 STD
BF00005604
N2
08/09
STD
12
Core Bit N2 RV400 08/09 12 STD
BF00001284
N2
08/09
STD
16
Core Bit N2 RV400 08/09 16 STD
BF00005605
N2
09/11
STD
12
Core Bit N2 RV400 09/11 12 STD
BF00001287
N2
09/11
STD
16
Core Bit N2 RV400 09/11 16 STD
BF00005606
N2
13
STD
10
Core Bit N2 RV400 13 10 STD
BF00004710
N2
14
STD
10
Core Bit N2 RV400 14 10 STD
BF00004711
N2
06/07
TW
12
Core Bit N2 RV400 06/07 12 TW
BF00003661
N2
06/07
TW
16
Core Bit N2 RV400 06/07 16 TW
BF00005609
N2
08/09
TW
12
Core Bit N2 RV400 08/09 12 TW
BF00003662
N2
08/09
TW
16
Core Bit N2 RV400 08/09 16 TW
BF00005610
N2
09/11
TW
12
Core Bit N2 RV400 09/11 12 TW
BF00003663
N2
09/11
TW
16
Core Bit N2 RV400 09/11 16 TW
BF00005611
N2
06/07
TURBO
16
Core Bit N2 RV400 06/07 16 TURBO
BF00005614
N2
08/09
TURBO
16
Core Bit N2 RV400 06/07 16 TURBO
BF00005615
N2
09/11
TURBO
16
Core Bit N2 RV400 09/11 16 TURBO
BF00005616
Description
23 Sandvik Mining Exploration
Item Number
N2 SYSTEMS
DIAMOND PRODUCTS — N2—SYSTEMS
RZ400 Series Impregnated Bit - N2-Size Size
Series
Face design
Crown Height
Description
Item Number
N2
4/6
STD
12
Core Bit N2 RZ400 4/6 12 STD
BF00008012
N2
4/6
STD
16
Core Bit N2 RZ400 4/6 16 STD
BF00008013
N2
07
STD
12
Core Bit N2 RZ400 07 12 STD
BF00006609
N2
07
STD
16
Core Bit N2 RZ400 07
16 STD
BF00008051
N2
09
STD
12
Core Bit N2 RZ400 09 12 STD
BG00620608
N2
09
STD
16
Core Bit N2 RZ400 09 16 STD
BG00620609
N2
12/14
STD
12
Core Bit N2 RZ400 12 /14 12 STD
BF00005375
N2
12/14
STD
16
Core Bit N2 RZ400 12 /14 16 STD
BF00005607
N2
4/6
TW
12
Core Bit N2 RZ400 4/6 12 TW
BF00008014
N2
4/6
TW
16
Core Bit N2 RZ400 4/6 16 TW
BF00008015
N2
07
TW
12
Core Bit N2 RZ400 07
12 TW
BF00008052
N2
07
TW
16
Core Bit N2 RZ400 07
16 TW
BF00008053
N2
09
TW
12
Core Bit N2 RZ400 09
12 TW
BG00622883
N2
09
TW
16
Core Bit N2 RZ400 09
16 TW
BG00620610
N2
12/14
TW
12
Core Bit N2 RZ400 12/14 12 TW
BF00005376
N2
12/14
TW
16
Core Bit N2 RZ400 12/14 16 TW
BF00005612
N2
07
TURBO
16
Core Bit N2 RZ400 07 16 TURBO
BG00736240
N2
12/14
TURBO
16
Core Bit N2 RZ400 12/14 16 TURBO
BG00611750
Description
Item Number
RV500 series Surface Set Bit -N2-Size Size
Diamond Size
Steps
N2
60/80 spc
NONE
17
A
Core Bit N2 RV500 60/80 A
BG00611761
N2
40/60 spc
NONE
17
A
Core Bit N2 RV500 40/60 A
BG00611762
Ct Weight / Grade
24 Sandvik Mining Exploration
NX SYSTEMS
DIAMOND PRODUCTS — NX/N3/NW—SYSTEMS RV300 Series Wedging Bit - NX—Navi- Size Size
Series
Face design
Crown Height
NX
12
Navi
10
Navi NX RV300 12 BW Rod Thread
BF00004692
NX
13
Navi
10
Navi NX RV300 13 BW Rod Thread
BF00005866
NX
Imp
Reamer
NX RV300 Reamer
BF00004732
Description
60/80
Bull Nose bit NX RV300 AAA S/S Bull Nose
BF00005865
SPC
N3
NX
Item Number
N Rod Thread
Size
Series
Face design
Crown Height
N3
06/07
FD
12
Core Bit N3 RV400 06/07
12 FD
BF00003669
N3
08/09
FD
12
Core Bit N3 RV400 08/09
12 FD
BF00003670
N3
09/11
FD
12
Core Bit N3 RV400 09/11
12 FD
BF00003671
N3
06/07
NFD
12
Core Bit N3 RV400 06/07
12 NFD
BF00003178
N3
08/09
NFD
12
Core Bit N3 RV400 08/09
12 NFD
BF00003179
N3
09/11
NFD
12
Core Bit N3 RV400 09/11
12 NFD
BF00003179
Description
NW
RV400 Series Impregnated Bit - N3 - Size Item Number
NFD
RZ400 Series Impregnated Bit - N3 - Size Size
Series
Face design
Crown Height
N3
4/6
FD
12
Core Bit N3 RZ 400 4/6
12 FD
BF00008019
N3
07
FD
12
Core Bit N3 RZ 400 07
12 FD
BF00008057
N3
12/14
FD
12
Core Bit N3 RZ 400 12/14
12 FD
BF00005379
N3
12/14
NFD
12
Core Bit N3 RZ 400 12/14
12 NFD
BF00005377
Description
Item Number
RV500 series Surface Set Bit -N3-Size Size
Diamond Size
Steps
N3
40/60 spc
6
Ct Weight Grade 17
AA
Description
Item Number
Core Bit N3 RV500 6 Step 40/60 AA
BF00004635
Description
Item Number
RV700 series Casing Shoes-NW -Size Size
Series
Face Design
Crown Height
NW
02
STD
6 mm
Casing shoe NW RV700 02 06
BF00005869
NW
06
STD
6 mm
Casing shoe NW RV700 06 06
BF00004472
25 Sandvik Mining Exploration
FD
H SYSTEMS
DIAMOND PRODUCTS — H—SYSTEMS
RV200 Series PCD Bits –H-Size
Size
PCD Size
Face design
H
08/08
STD
Crown Height
Description
Item Number
Soft PCD Core Bit H RV200 08/08
BF00004665
Formation RV300 Series Wedging Bits - H-Size Size
Series
Step Face
Crown Height
H
8
7
6 mm
Wedge Core Bit H RV300-08-06
BF00004677
H
10
7
6 mm
Wedge Core Bit H RV300-10-06
BG00611757
H
14
Inverted
6 mm
Wedge Core Bit H RV300–14
BF00004678
cone
Description
Item Number
Inverted Cone
RV400 Series Impregnated Bit - H- Size Size
Series
Face design
Crown Height
H
02
STD
12
Core Bit H RV400 02 12 STD
BF00003181
H
06/07
STD
12
Core Bit H RV400 06/07 12 STD
BF00003184
H
06/07
STD
16
Core Bit H RV400 06/07 16 STD
BF00005634
H
08/09
STD
12
Core Bit H RV400 08/09 12 STD
BF00003185
H
08/09
STD
16
Core Bit H RV400 08/09 16 STD
BF00005635
H
09/11
STD
12
Core Bit H RV400 09/11 12 STD
BF00003186
H
09/11
STD
16
Core Bit H RV400 09/11 16 STD
BF00005636
H
13
STD
10
Core Bit H RV400 13 10 STD
BF00004700
H
14
STD
10
Core Bit H RV400 14 10 STD
BF00004699
H
02
TW
12
Core Bit H RV400 02 12 TW
BF00003675
H
06/07
TW
12
Core Bit H RV400 06/07 12 TW
BF00003678
H
06/07
TW
16
Core Bit H RV400 06/07 16 TW
BF00005639
H
08/09
TW
12
Core Bit H RV400 08/09 12 TW
BF00003679
H
08/09
TW
16
Core Bit H RV400 08/09 16 TW
BF00005640
H
09/11
TW
12
Core Bit H RV400 09/11 12 TW
BF00004057
H
09/11
TW
16
Core Bit H RV400 09/11 16 TW
BF00005641
H
06/07
TURBO
16
Core Bit H RV400 06/07 16 TURBO
BF00005644
H
08/09
TURBO
16
Core Bit H RV400 06/07 16 TURBO
BF00005645
H
09/11
TURBO
16
Core Bit H RV400 09/11 16 TURBO
BF00005646
Description
26 Sandvik Mining Exploration
Item Number
RZ400 Series Impregnated Bit - H-Size Size
Series
Face design
Crown Height
Description
Item Number
H
4/6
STD
12
Core Bit H RZ400 4/6 12 STD
BF00008022
H
4/6
STD
16
Core Bit H RZ400 4/6 16 STD
BF00008023
H
07
STD
12
Core Bit H RZ400 07 12 STD
BF000008060
H
07
STD
16
Core Bit H RZ400 07
16 STD
BF00008061
H
09
STD
12
Core Bit H RZ400 09 12 STD
BG00620611
H
09
STD
16
Core Bit H RZ400 09 16 STD
BG00620612
H
12/14
STD
12
Core Bit H RZ400 12 /14 12 STD
BF00005380
H
12/14
STD
16
Core Bit H RZ400 12 /14 16 STD
BF00005637
H
4/6
TW
12
Core Bit H RZ400 4/6 12 TW
BF00008024
H
4/6
TW
16
Core Bit H RZ400 4/6 16 TW
BF00008025
H
07
TW
12
Core Bit H RZ400 07
12 TW
BF00008062
H
07
TW
16
Core Bit H RZ400 07
16 TW
BF00008063
H
09
TW
12
Core Bit H RZ400 09
12 TW
BG00620613
H
09
TW
16
Core Bit H RZ400 09
16 TW
BG00620614
H
12/14
TW
12
Core Bit H RZ400 12/14 12 TW
BF00005381
H
12/14
TW
16
Core Bit H RZ400 12/14 16 TW
BF00005642
H
07
TURBO
16
Core Bit H RZ400 07 16 TURBO
BF00008065
H
12/14
TURBO
16
Core Bit H RZ400 12/14 16 TURBO
BF00005647
RV500 series Surface Set Bit –H-Size Size
Diamond Steps Size
Ct Weight / Grade
Description
Item Number
H
30/40 spc
5
22
AA
Core Bit H RV500 5 STEP 30/40 AA
BF00004631
H
16/30 spc
4
29.5
AA
Core Bit H RV500 4 STEP 16/30 AA
BG00641961
27 Sandvik Mining Exploration
H SYSTEMS
DIAMOND PRODUCTS — H—SYSTEMS
H SYSTEMS
DIAMOND PRODUCTS — H—SYSTEMS
RV600 series Reaming shells-H-H3-Size Size
Position Face Design
Size
Description
Item Number
H/H3
Front
Standard
96.1 +/- 0.12
Reamer H RV600 STD Front
BF00004445
H/H3
Front
Over size
96.6 +/-0.12
Reamer H RV600 O/S Front
BF00004446
H/H3
Front
Bit size
95.6 +/- 0.12
Reamer H RV600 Bit Size Front
BF00004619
H/H3
Back
Standard
96.1 +/- 0.12
Reamer H RV600 STD Backend
BF00004447
H/H3
Back
Over size
96.6 +/- 0.12
Reamer H RV600 0/S Backend
BF00004448
H/H3
Back
Bit size
95.6 +/- 0.12
Reamer H RV600 Bit Size Backend
BF00004618
RV700 series Casing Shoes-H Rod Shoe and Spud Shoe -Size Size
Series
Face Design
Crown Height
Description
Item Number
H
06
STD
6 mm
Rod shoe
H RV700 06 06
BF00004470
H
06
STD
6 mm
Spud shoe H RV700 06 06
BF00004728
H
06
STD
6 mm
Rod shoe
H-HD RV700 06 06
BF00005508
Description
Item Number
RV700 series Casing Reaming Shoe-H Rod -Size Size
Series
Face Design Crown Height
H
10
STD
6 mm
Rod shoe H RV700 95.5 od x 76.2 id Reaming over N size Rod
BF00005191
H
10
STD
6 mm
Rod shoe H RV700 95.5 od x 77 id Reaming over N size reamer
BF00006263
28 Sandvik Mining Exploration
H3 SYSTEMS
DIAMOND PRODUCTS — H3-HX SYSTEMS
Size
PCD Size
Face design
Description
Item Number
H3
08/08
STD
PCD Core Bit H3 RV200 STD FD / STD THREAD
BF00004666
H3
08/08
STEP
PCD Core Bit H3 RV200 STD FD / STD THREAD
BF00005492
H3
13/08
STEP
PCD Core Bit H3 RV200 STD FD / STD THREAD
BF00005493
H3
16/13
STEP
PCD Core Bit H3 RV200 STD FD / STD THREAD
BF00005494
RV300 Series Wedging Bits - H3-Size Size
Series
Step Face
Crown Height
H3
8
7
6 mm
Wedge Core Bit H3 RV300-08
BF00004681
H3
10
7
6 mm
Wedge Core Bit H3 RV300-10
BG00611758
Description
Item Number
RV300 Series Wedging Bit - HX—Navi- Size Size
Series
Face design
Crown Height
HX
12
Navi
10
Navi HX RV300 12 NW Rod Thread
BF00004684
HX
13
Navi
10
Navi HX RV300 13 NW Rod Thread
BF00004685
HX
Imp
Reamer
HX RV300 Reamer
BF00004683
60/80 HX
Description
Bull Nose bit HX RV300 AAA S/S Bull Nose
SPC
Item Number
BF00004682 N Rod Thread
29 Sandvik Mining Exploration
HX
RV200 Series PCD Bits –H3-Size
DIAMOND PRODUCTS —H3—SYSTEMS
H3 SYSTEMS
RV400 Series Impregnated Bit - H3- Size
SB
FD
NFD
Size
Series
Face design
Crown Height
H3
02
SB
12
Core Bit H3 RV400 02 12 SB
BF00004141
H3
06/07
SB
12
Core Bit H3 RV400 06/07 12 SB
BF00004144
H3
06/07
SB
16
Core Bit H3 RV400 06/07 16 SB
BF00005702
H3
08/09
SB
12
Core Bit H3 RV400 08/09 12 SB
BF00004145
H3
08/09
SB
16
Core Bit H3 RV400 08/09 16 SB
BF00005703
H3
09/11
SB
12
Core Bit H3 RV400 09/11 12 SB
BF00004146
H3
09/11
SB
16
Core Bit H3 RV400 09/11 16 SB
BF00005704
H3
02
FD
12
Core Bit H3 RV400 02 12 FD
BF00003693
H3
06/07
FD
12
Core Bit H3 RV400 06/07 12 FD
BF00003696
H3
08/09
FD
12
Core Bit H3 RV400 08/09 12 FD
BF00003697
H3
09/11
FD
12
Core Bit H3 RV400 09/11 12 FD
BF00003698
H3
13
FD
10
Core Bit H3 RV400 13 10 FD
BF00004702
H3
14
FD
10
Core Bit H3 RV400 14 10 FD
BF00004703
H3
06/07
NFD
12
Core Bit H3 RV400 06/07 12 NFD
BF00003170
H3
08/09
NFD
12
Core Bit H3 RV400 08/09 12 NFD
BF00003171
H3
09/11
NFD
16
Core Bit H3 RV400 09/11 12 NFD
BF00003172
Description
Item Number
RZ400 Series Impregnated Bit - H3- Size Size
Series
Face design
Crown Height
H3
4/6
SB
12
Core Bit H3 RZ400 4/6 12 SB
BF00008028
H3
07
SB
12
Core Bit H3 RZ400 07 12 SB
BF00008066
H3
09
SB
12
Core Bit H3 RZ400 09 12 SB
BG00620615
H3
09
SB
16
Core Bit H3 RZ400 09 16 SB
BG00620616
H3
12/14
SB
12
Core Bit H3 RZ400 12/14 12 SB
BF00005383
H3
12/14
SB
16
Core Bit H3 RZ400 12/14 16 SB
BF00005705
H3
4/6
FD
12
Core Bit H3 RZ400 4/6 12 FD
BF00008029
H3
07
FD
12
Core Bit H3 RZ400 07 12 FD
BF00008067
H3
09
FD
12
Core Bit H3 RZ400 09 12 FD
BG00736579
H3
12/14
FD
12
Core Bit H3 RZ400 12/14 12 FD
BF00005384
H3
12/14
NFD
12
Core Bit H3 RZ400 12/14 12 NFD
BF00005382
Description
Item Number
RV500 series Surface Set Bit –H3-Size Size
Diamond Size
H3
20/30 spc
7
H3
10/15 spc
4
Steps Ct Weight /Grade 38 35
AA A
Description
Item Number
H3 RV500 7 STEP 20/30 AA 6 WW 5 x 4 mm
BF00004632
H3 RV500 4 STEP 10/15 A 6 WW 6 x 6 mm
BF00005351
30 Sandvik Mining Exploration
RV200 Series PCD Bits –HWT-Size PCD Size
Face design
HWT
08/08
Flat Face
Crown Height Soft
Description
Item Number
PCD 123 mm RV200 BF00004660
Formation
2 3/8 API REG THREAD
RV700 series Casing Shoes/ Spud Shoe HWT Size
Series
Face Design Crown Height
Description
Item Number
HWT
06
STD
6 mm
Casing Shoe HWT RV700 06 06
BF00004478
HWT
06
STD
6 mm
Spud shoe HWT RV700 06 06
BF00004730
RV700 series Casing Reaming Shoe HWT Size
Series
Face Design
Crown Height
HWT
10
STD
6 mm
HWT RV700 117.4 OD x 91 ID Reaming over H Size Rod
BF00005193
HWT
10
STD
6 mm
HWT RV700 117.4 OD x 96.6 ID Reaming over H size reamer
BF00005194
Description
Item Number
RV700 series Casing Shoes/ Spud Shoe HW Size
Series
Face Design
Crown Height
HW
06
STD
6 mm
Casing Shoe HW RV700 06 06
BF00004473
HW
06
STD
6 mm
Spud shoe HW RV700 06 06
BF00004729
Description
31 Sandvik Mining Exploration
Item Number
HW
Size
HWT SYSTEMS
DIAMOND PRODUCTS -HWT/HW—SYSTEMS
P SYSTEMS
DIAMOND PRODUCTS –P-SYSTEMS RV200 Series PCD Bits –P– Size Size
PCD Size
Face design
p
08/08
STD
Crown Height Soft
Description
Item Number
PCD Core Bit P RV200 BF00005958
Formation RV400 Series Impregnated Bit - P- Size Size
Series
Face design
Crown Height
Description
Item Number
P
02
STD
10
Core Bit P RV400 02
10 STD
BF00004283
P
06/07
STD
10
Core Bit P RV400 06/07 10 STD
BF00004286
P
08/09
STD
10
Core Bit P RV400 08/09 10 STD
BF00004287
P
09/11
STD
10
Core Bit P RV400 09/11 10 STD
BF00004288
P
13
STD
10
Core Bit P RV400 13
10 STD
BF00004718
P
14
STD
10
Core Bit P RV400 14
10 STD
BG00620618
P
06/07
TW
10
Core Bit P RV400 06/07 10 TW
BF00004294
P
08/09
TW
10
Core Bit P RV400 08/09 10 TW
BF00004295
P
09/11
TW
12
Core Bit P RV400 09/11 10 TW
BF00004296
RZ400 Series Impregnated Bit - P- Size Size
Series
Face design
Crown Height
Description
Item Number
P
4/6
STD
10
Core Bit P RZ400 4/6
10 STD
BF00008032
P
07
STD
10
Core Bit P RZ400 07
10 STD
BF00008070
P
09
STD
10
Core Bit P RZ400 09
10 STD
BG00736247
P
12/14
STD
10
Core Bit P RZ400 12/14 10 STD
BF00005385
P
4/6
TW
10
Core Bit P RZ400 4/6
10 TW
BF00008033
P
07
TW
10
Core Bit P RZ400 07
10 TW
BF00008071
P
09
TW
10
Core Bit P RZ400 09
10 TW
BG00736250
P
12/14
TW
10
Core Bit P RZ400 12/14 10 TW
BF00005386
RV600 series Reaming shells-P-P3 Size Size
Position Face Design
Size
Description
Item Number
P/P3
Front
Standard
122.6 +/- 0.12 Reamer P RV600 STD Front
BF00004453
P/P3
Front
Over size
123.6 +/-0.12 Reamer P RV600 O/S Front
BF00004454
P/P3
Back
Standard
122.6 +/-0.12 Reamer P RV600 STD Backend
BF00004455
P/P3
Back
Over size
123.6 +/-0.12 Reamer P RV600 0/S Backend
BF00004456
32 Sandvik Mining Exploration
P3 SYSTEMS
DIAMOND PRODUCTS –P3- SYSTEMS RV200 Series PCD Bits –P3-Size Size
PCD Size
Face design
P3
13/08
Step
Description
Item Number
PCD Core Bit P3 RV200 STEPPED FD / STD THREAD
BF00004733
RV400 Series Impregnated Bit - P3- Size Size
Series
Face design
Crown Height
P3
02
SB
10
Core Bit P3 RV400 02
10 SB
BF00004314
P3
06/07
SB
10
Core Bit P3 RV400 06/07 10 SB
BF00004317
P3
08/09
SB
10
Core Bit P3 RV400 08/09 10 SB
BF00004318
P3
09/11
SB
10
Core Bit P3 RV400 09/11 10 SB
BF00004319
P3
02
FD
10
Core Bit P3 RV400 02
10 FD
BF00004306
P3
06/07
FD
10
Core Bit P3 RV400 06/07 10 FD
BF00004309
P3
08/09
FD
10
Core Bit P3 RV400 08/09 10 FD
BF00004310
P3
09/11
FD
10
Core Bit P3 RV400 09/11 10 FD
BF00004311
P3
13
FD
10
Core Bit P3 RV400 13
10 FD
BF00004719
P3
14
FD
10
Core Bit P3 RV400 14
10 FD
BF00004720
Description
Item Number
RZ400 Series Impregnated Bit - P3- Size Size
Series
Face design
Crown Height
P3
4/6
SB
10
Core Bit P3 RZ400 4/6
10 SB
BF00008034
P3
07
SB
10
Core Bit P3 RZ400 07
10 SB
BF00008072
P3
09
SB
10
Core Bit P3 RZ400 09
10 SB
BG00620619
P3
12/14
SB
10
Core Bit P3 RZ400 12/14 10 SB
BF00005388
P3
4/6
FD
10
Core Bit P3 RZ400 4/6
10 FD
BF00008035
P3
07
FD
10
Core Bit P3 RZ400 07
10 FD
BF00008073
P3
09
FD
10
Core Bit P3 RZ400 09
10 FD
BG00736252
P3
12/14
FD
10
Core Bit P3 RZ400 12/14 10 FD
BF00005389
Description
Item Number
RV500 series Surface Set Bit –P3-Size Size
Diamond Size
Steps
P3
15/20 spc
5
Ct Weight / Grade 40
AA
Description P3 RV500 5 STEP 15/20 A Sand bit
33 Sandvik Mining Exploration
Item Number BF00004639
SB
FD
PWT SYSTEMS PW
DIAMOND PRODUCTS –PWT–PW CASING SHOE
RV700 series Casing Shoes/ Flush design PWT Size
Series Face Design Crown Height
Description
Item Number
PWT
06
STD
6 mm
Casing Shoe PWT RV700 06 06
BF00004479
PWT
06
STD
6 mm
Flush design PWT RV700 06 06
BF00006025
RV700 series Casing Shoes PW Size PW
Series Face Design 06
STD
Crown Height 6 mm
Description Casing Shoe PW RV700 06 06
34 Sandvik Mining Exploration
Item Number BF00004474
RV400 Series Impregnated Bit - TK46- Size Size
Series
Face design
Crown Height
TK46
03
STD
12
Core Bit TK46 RV400 03
12 STD
BF00001289
TK46
06/07
STD
12
Core Bit TK46 RV400 06/07 12 STD
BF00001291
TK46
08/09
STD
12
Core Bit TK46 RV400 08/09 12 STD
BF00001292
TK46
09/11
STD
12
Core Bit TK46 RV400 09/11 12 STD
BF00001293
TK46
12
STD
12
Core Bit TK46 RV400 12
12 STD
BF00004011
TK46
13
STD
12
Core Bit TK46 RV400 13
12 STD
BF00001294
Description
Item Number
RZ400 Series Impregnated Bit - TK46- Size Size
Series
Face design
Crown Height
Description
Item Number
TK46
12/14
STD
12
Core Bit TK46 RZ400 12/14 12 STD
BF00005393
TK46
14
STD
12
Core Bit TK46 RZ400 14
12 STD
BF00001295
TK46
08/09
TURBO
16
Core Bit TK46 RZ400 08/09 16 Turbo
BG00611221
TK46
12/14
TURBO
16
Core Bit TK46 RZ400 12/14 16 Turbo
BG00611224
RV600 Series Reamer TK46 Size
Position
TK46
Front
design Standard
Size MM 46.8
+/- 0.1
Description
Item Number
TK46 RV600 Premium Reamer
BF00006010
35 Sandvik Mining Exploration
TK46 METRIC SYSTEMS
DIAMOND PRODUCTS—TK46 METRIC SYSTEMS
TK56 METRIC SYSTEMS
DIAMOND PRODUCTS—TK56 METRIC SYSTEMS
RV400 Series Impregnated Bit - TK56- Size Size
Series
Face design
Crown Height
Description
TK56
03
STD
12
Core Bit TK56 RV400 03
12 STD
BF00001298
TK56
06/07
STD
12
Core Bit TK56 RV400 06/07 12 STD
BF00001300
TK56
08/09
STD
12
Core Bit TK56 RV400 08/09 12 STD
BF00001301
TK56
09
STD
12
Core Bit TK56 RV400 09
12 STD
BF00005318
TK56
09/11
STD
12
Core Bit TK56 RV400 09/11 12 STD
BF00001302
TK56
12
STD
12
Core Bit TK56 RV400 12
12 STD
BF00003987
TK56
13
STD
12
Core Bit TK56 RV400 13
12 STD
BF00001303
TK56
08/09
TURBO
16
Core Bit TK56 RV400 08/09 16 TURBO BG00611225
TK56
13
TURBO
16
Core Bit TK56 RV400 13 16 TURBO
BF00008294
TK56
14
TURBO
16
Core Bit TK56 RV400 14 16 TURBO
BG00389619
Item Number
RZ400 Series Impregnated Bit - TK56- Size Size
Series
Face design
Crown Height
TK56
12/14
STD
16
Core Bit TK56 RZ400 12/14 16 STD
BF00005394
TK56
12/14
TURBO
12
Core Bit TK56 RZ400 12/14 12 TURBO
BF00005699
TK56
12/14
TURBO
16
Core Bit TK56 RZ400 08/09 16 TURBO
BG00611226
Description
Item Number
RV600 Series Reamer TK56 Size
Position
design
Size MM
Description
Item Number
TK56
Front
Standard
56.8 +/- 0.1 TK56 RV600 STD Premium Reamer
BF00006011
TK56
Front
Oversize
57.00 +/-0.1 TK56 RV600 0/S Premium Reamer
BF00006015
RV700 series Casing Shoes 56 Size 56
Series Face Design 06
STD
Crown Height 6 mm
Description Casing Shoe 56 RV700 06 06
36 Sandvik Mining Exploration
Item Number BF00001448
Size
Series
Face design
Crown Height
TK66
03
STD
12
Core Bit TK66 RV400 03
12 STD
BF00001316
TK66
06/07
STD
12
Core Bit TK66 RV400 06/07 12 STD
BF00001318
TK66
08/09
STD
12
Core Bit TK66 RV400 08/09 12 STD
BF00001319
TK66
09
STD
12
Core Bit TK66 RV400 09
12 STD
BF00005319
TK66
12
STD
12
Core Bit TK66 RV400 12
12 STD
BF00003986
TK66
13
STD
12
Core Bit TK66 RV400 13
12 STD
BF00001321
TK66
14
STD
12
Core Bit TK66 RV400 14
12 STD
BF00001322
TK66
08/09
TURBO
16
Core Bit TK66 RV400 08/09 16 TURBO
BG00611296
TK66
13
TURBO
16
Core Bit TK66 RV400 13
BG00566915
Description
Item Number
16 TURBO
RZ400 Series Impregnated Bit - TK66- Size Size
Series
Face design
Crown Height
TK66
12/14
STD
12
Core Bit TK66 RZ400 12/14 12 STD
BF00005395
TK66
12/14
TURBO
16
Core Bit TK66 RZ400 12/14 16 TURBO
BG00611298
Size MM
Description
Item Number
Description
Item Number
RV600 Series Reamer TK66 Size
Position
design
TK66
Front
Standard
67.1 +/- 0.1 TK66 RV600 STD Premium Reamer
BF00006012
TK66
Front
Oversize
67.4 +/-0.1
BF00006016
TK66 RV600 0/S Premium Reamer
RV700 series Casing Shoes 66 Size
Series
Face Design
Crown Height
66
06
STD
6 mm
Description
Item Number
Casing Shoe 66 RV700 06 06
BF00001449
RV400 Series Impregnated Bit - TK66-3- Size Size
Series
Face design
Crown Height
TK66-3
03
STD
12
Core Bit TK66-3 RV400 03
12 STD
BF00001325
TK66-3
06/07
STD
12
Core Bit TK66-3 RV400 06/07 12 STD
BF00001327
TK66-3
08/09
STD
12
Core Bit TK66-3 RV400 08/09 12 STD
BF00001328
TK66-3
14
STD
12
Core Bit TK66-3 RV400 14
BF00001331
Description
Item Number
12 STD
RZ400 Series Impregnated Bit - TK66-3- Size Size
Series
Face design
Crown Height
TK66-3
12/14
STD
12
Description Core Bit TK66-3 RZ400 12/14 12 STD
37 Sandvik Mining Exploration
Item Number BF00006580
TK66-3
RV400 Series Impregnated Bit - TK66- Size
TK66 METRIC SYSTEMS
DIAMOND PRODUCTS—TK66-TK66-3 METRIC SYSTEMS
TK76 METRIC SYSTEMS TK76-3 86 C/S
DIAMOND PRODUCTS—TK76-76-3 METRIX SYSTEMS DIAMOND PRODUCTS—86 CASING SHOE RV400 Series Impregnated Bit - TK76- Size Size
Series
Face design
Crown Height
TK76
03
STD
12
Core Bit TK76 RV400 03
12 STD
BF00001334
TK76
06/07
STD
12
Core Bit TK76 RV400 06/07 12 STD
BF00001336
TK76
08/09
STD
12
Core Bit TK76 RV400 08/09 12 STD
BF00001337
TK76
14
STD
12
Core Bit TK76 RV400 14
BF00001340
TK76
08/09
TURBO
16
Core Bit TK76 RV400 08/09 16 TURBO
BG00611300
TK76
13
TURBO
16
Core Bit TK76 RV400 13
16 TURBO
BG00620621
TK76
14
TURBO
16
Core Bit TK76 RV400 14
16 TURBO
BG00566919
Description
Item Number
12 STD
RZ400 Series Impregnated Bit - TK76- Size Size
Series
Face design
Crown Height
TK76
12/14
STD
12
Core Bit TK76 RZ400 12/14 12 STD
TK76
12/14
TURBO
16
Core Bit TK76 RZ400 12/14 16 TURBO
Description
Item Number BF0005396 BG00611301
RV600 Series Reamer TK76 Size
Position
design
Size MM
Description
Item Number
TK76
Front
Standard
76.4 +/- 0.1 TK76 RV600 STD Premium Reamer
BF00006013
TK76
Front
Oversize
77.3 +/-0.1 TK76 RV600 0/S Premium Reamer
BF00006017
RV700 series Casing Shoes 76 Size
Series Face Design Crown Height
76
06
STD
6 mm
Description
Item Number
Casing Shoe 76 RV700 06 06
BF00001450
RV400 Series Impregnated Bit - TK76-3- Size Size
Series
Face design
Crown Height
TK76-3
03
STD
12
Core Bit TK76-3 RV400 03
12 STD
BF00001343
TK76-3
08/09
STD
12
Core Bit TK76-3 RV400 08/09 12 STD
BF00001346
TK76-3
14
STD
12
Core Bit TK76-3 RV400 14
BF00001349
Description
Item Number
12 STD
RZ400 Series Impregnated Bit - TK76-3- Size Size
Series
Face design
Crown Height
TK76-3
12/14
STD
12
Description Core Bit TK76-3 RZ400 12/14
Item Number 12 STD
BG00611302
RV700 series Casing Shoes 86 Size
Series
Face Design
Crown Height
86
06
STD
6 mm
Description Casing Shoe 86 RV700 06 06
38 Sandvik Mining Exploration
Item Number BF00001451
Size
Series
Face design
Crown Height
T46
03
STD
9
Core Bit T46 RV400 03
9 STD
BF00001361
T46
08/09
STD
9
Core Bit T46 RV400 08/09 9 STD
BF00001364
T46
09/11
STD
9
Core Bit T46 RV400 09/11 9 STD
BF00001365
T46
12
STD
9
Core Bit T46 RV400 12
9 STD
BF00005250
T46
13
STD
9
Core Bit T46 RV400 13
9 STD
BF00001366
T46
14
STD
9
Core Bit T46 RV400 14
9 STD
BF00001367
Description
Item Number
RZ400 Series Impregnated Bit - T46- Size Size
Series
Face design
Crown Height
T46
07
STD
9
Core Bit T46 RZ400 07
9 STD
BF00008407
T46
12/14
STD
9
Core Bit T46 RZ400 12/14
9 STD
BG00611330
Description
Item Number
RV600 Series Reamer - T46 Size
Position
T46
Front
design
Size MM
Standard
46.35 +/- 0.1
Description
Item Number
T46 RV600 STD Premium Reamer
BF00001462
DIAMOND PRODUCTS-T56 SYSTEMS RV400 Series Impregnated Bit - T56- Size Size
Series
Face design
Crown Height
T56
03
STD
9
Core Bit T56 RV400 03
9 STD
BF00001370
T56
08/09
STD
9
Core Bit T56 RV400 08/09 9 STD
BF00001373
T56
14
STD
9
Core Bit T56 RV400 14
BF00001376
Description
Item Number
9 STD
RZ400 Series Impregnated Bit - T56- Size Size
Series
Face design
Crown Height
T56
07
STD
9
Description Core Bit T56 RZ400 07
Item Number 9 STD
BG00740368
RV600 Series Reamer - T56 Size
Position
T56
Front
design Standard
Size MM 56.4 +/- 0.1
Description T56 RV600 STD Premium Reamer
Item Number BF00001463
RV700 series Casing Shoes –56 Size 56
Series Face Design 06
STD
Crown Height 6 mm
Description Casing Shoe 56 RV700 06 06
39 Sandvik Mining Exploration
Item Number BF00001448
T46 METRIC SYSTEMS
RV400 Series Impregnated Bit - T46- Size
T56
DIAMOND PRODUCTS-T46– T56 METRIC SYSTEMS
T66 METRIC SYSTEMS
DIAMOND PRODUCTS—T66-T76 METRIC SYSTEMS
RV400 Series Impregnated Bit - T66- Size Size
Series
Face design Crown Height
Description
Item Number
T66
03
STD
9
Core Bit T66 RV400 03
9 STD
BF00001370
T66
08/09
STD
9
Core Bit T66 RV400 08/09 9 STD
BF00001382
T66
12
STD
9
Core Bit T66 RV400 12
9 STD
BF00005252
T66
14
STD
9
Core Bit T66 RV400 14
9 STD
BF00001385
T76
RZ400 Series Impregnated Bit - T66 Size Size
Series
Face design
Crown Height
T66
07
STD
9
Description
Item Number
Core Bit T66 RZ400 07
9 STD
BG00740370
RV600 Series Reamer - T66 Size
Position
T66
Front
design
Size MM
Standard
66.35 +/- 0.1
Description
Item Number
T66 RV600 STD Premium Reamer
BF00001464
RV700 series Casing Shoes –66 Size
Series
Face Design
Crown Height
66
06
STD
6 mm
Description
Item Number
Casing Shoe 66 RV700 06 06
BF00001449
DIAMOND PRODUCTS—T76-SYSTEMS RV400 Series Impregnated Bit - T76- Size Size
Series
Face design
Crown Height
Description
Item Number
T76
03
STD
9
Core Bit T76 RV400 03
9 STD
BF00001388
T76
06/07
STD
9
Core Bit T76 TV400 06/07 9 STD
BG00611382
T76
08/09
STD
9
Core Bit T76 TV400 08/09 9 STD
BF00001391
T76
14
STD
9
Core Bit T76 RV400 14
BF00001394
9 STD
RZ400 Series Impregnated Bit - T76 Size Size
Series
Face design
Crown Height
T76
07
STD
9
Description Core Bit T76 RZ400 07
Item Number 9 STD
BG00740371
RV600 Series Reamer - T76 Size
Position
T76
Front
design
Size MM
Standard
76.4 +/- 0.1
Description
Item Number
T76 RV600 STD Premium Reamer
BF00001465
Description
Item Number
RV700 series Casing Shoes –76 Size 76
Series Face Design 06
STD
Crown Height 6 mm
Casing Shoe 76 RV700 06 06
40 Sandvik Mining Exploration
BF00001450
RV400 Series Impregnated Bit - T86- Size Size
Series
Face design
Crown Height
T86
03
STD
9
Core Bit T86 RV400 03
9 STD
BF00001397
T86
08/09
STD
9
Core Bit T86 TV400 08/09 9 STD
BF00001400
Description
Item Number
Description
Item Number
RZ400 Series Impregnated Bit - T86 Size Size
Series
Face design
Crown Height
T86
07
STD
9
Core Bit T86 RZ400 07
9 STD
BG00740374
RV600 Series Reamer - T86 Size
Position
design
Size MM
Description
Item Number
T86
Front
Standard
86.4 +/- 0.1
T86 RV600 STD Premium Reamer
BF00001466
Description
RV700 series Casing Shoes –86 Size
Series
Face Design
Crown Height
86
06
STD
6 mm
Casing Shoe 86 RV700 06 06
41
Sandvik Mining Explotation
Item Number BF00001451
T86 METRIC SYSTEMS
DIAMOND PRODUCTS—T86-SYSTEMS
T101
DIAMOND PRODUCTS - T101-SYSTEMS
DIAMOND PRODUCTS—T101-SYSTEMS RV400 Series Impregnated Bit - T101- Size Size
Series
Face design
Crown Height
T101
03
STD
9
Core Bit T101 RV400 03
9 STD
BF00001406
T101
08/09
STD
9
Core Bit T101 RV400 08/09 9 STD
BF00001409
Description
Item Number
Description
Item Number
RZ400 Series Impregnated Bit - T86 Size Size
Series
Face design
Crown Height
T101
07
STD
9
Core Bit T101 RZ400 07
9 STD
BG00611386
RV600 Series Reamer - T101 Size
Position
T101
Front
design Standard
Size MM 101.35 +/- 0.1
Description T101 RV600 PREMIUM REAMER
42 Sandvik Mining Exploration
Item Number BF00001467
RV700 series Casing Shoes HD74 Size
Series Face Design
HD74
Crown Height
STD
6 mm
Description Casing Shoe HD74 RV700
Item Number BF00001454
RV700 series Casing Shoes HD86 Size
Series Face Design
HD86
Crown Height
STD
6 mm
Description Casing Shoe HD86 RV700
Item Number BF00001455
RV700 series Casing Shoes HD97 Size
Series Face Design
HD94
STD
Crown Height 6 mm
Description Casing Shoe HD94 RV700
Item Number BF00001456
RV800 Series Cleaning Bits Size
Series
Face design
Crown Height
Description
Item Number
Z46
4
Cleaning bit Z46 RV800 04 C
BF00001457
Z56
4
Cleaning bit Z56 RV800 04 C
BF00001458
Z66
4
Cleaning bit Z66 RV800 04 C
BF00001459
Z76
4
Cleaning bit Z76 RV800 04 C
BF00001460
43 Sandvik Mining Exploration
METRIC CASING SHOE
DIAMOND PRODUCTS—RV700-RV800
CLEANING BITS
METRC CASING SHOES AND CLEANING BITS
4C CONVETIONAL
DIAMOND PRODUCTS-CONVENTIONAL 4C SYSTEMS
RV200 Series PCD Bits –4C– Size Size
PCD Size
Face design
Crown Height
4C
08/08
FD
Soft
Description
Item Number
PCD Core Bit 4C RV200 FD
BF00004661
PCD Core Bit 4C RV200 FD
BF00005959
Formation 4C
08/13
FD
Soft Formation
RV400 Series Impregnated Bit - 4C- Size Size
Series
Face design Crown Height Description
Item Number
4C
02
FD
8
Core Bit 4C RV400 02
4C
06/07
FD
8
Core Bit 4C RV400 06/07 08 FD BF00004392
4C
08/09
FD
8
Core Bit 4C RV400 08/09 08 FD BF00004393
08 FD BF00004389
RV600 Series Reamer - 4C Size
Position
design
4C
Front
Standard
4C
Front
TC
Size MM
Description
Item Number
139.7 +/- 0.12 4C RV600 STD FRONT
BF00004465
139.7 +/- 0.12 4C RV600 TUNGSTEN MESH
BF00005853
44 Sandvik Mining Exploration
RV200 Series PCD Bits –8C– Size Size
PCD Size
Face design
Crown Height
8C
08/08
FD
Soft
Description
Item Number
PCD Core Bit 8C RV200 FD
BF00005359
PCD Core Bit 8C RV200 STD
BF00004662
PCD Core Bit 8C RV200 STD
BF00004663
Formation 8C
13
STD
Soft Formation
8C
08
STD
Soft Formation
RV400 Series Impregnated Bit - 8C- Size Size
Series
Face design
Crown Height
Description
8C
02
FD
8
Core Bit 8C V400 02
08 FD
BF00004397
8C
06/07
FD
8
Core Bit 8C RV400 06/07 08 FD
BF00004400
8C
08/09
FD
8
Core Bit 8C RV400 08/09 08 FD
BF00004401
8C
13
FD
8
Core Bit 8C RV400 13
08 FD
BF00004696
8C
14
FD
8
Core Bit 8C RV400 14
08 FD
BF00004697
8C
08/09
TW
8
Core Bit 8C RV400 08/09 08 TW BF00005094
Item Number
RV600 Series Reamer - 8C Size
Position
8C
Front
design
Size MM
Standard
260.65 +/- 0.12
Description 8C RV600 STD FRONT
45 Sandvik Mining Exploration
Item Number BF00004467
8C CONVETIONAL
DIAMOND PRODUCTS-CONVENTIONAL 8C SYSTEMS
RV200 PCD SYSTEMS
DIAMOND PRODUCTS-PCD-RV200 RV200 Series Impregnated Bit - PCD-Size Size
Face Blade
Cutters MM
Thread
Description
Item Number
52.5
3 BLADE 08
AW PIN
PCD BIT 52.5 Non Coring
BG00635686
55
F/F
AW PIN
PCD 55 Non Coring
BG00577422
60.5
3 BLADE 08 WING
B ROD BOX
PCD 60.5 Non Coring
BG00642159
65
F/F
B ROD PIN
PCD 65 Non Coring
BG00577423
N/76
3 BLADE 13
N ROD BOX
PCD Bit N/76 Non Coring
BG00642166
N/76
3 BLADE 13
NW PIN
PCD Bit N/76 Non Coring
BF00005354
N PIN
PCD Bit 85 OD x56 ID
BG00635619
85 OD x 56 ID F/F
08
08
08
H/96
3 BLADE 13
NW PIN
PCD Bit H/96 Non Coring
BF00005284
99
F/F
13
NW PIN
PCD Bit 99 Non Coring
BF00004664
H/96
F/F
13
NW PIN
PCD H/96 Non Coring
BF00008202
P/123
3 BLADE 08
2 3/8 API
PCD P/123
BF00004660
4 1/2’’
3 BLADE 13 BLADE
2 3/8 API
PCD 4 1/2’’
BF00005180
5 1/2 ‘’
3 BLADE 13 BLADE
2 7/8 API &3/1/2 API
PCD 5 1/2’’
BF00005181
5 1/8’’
3 BLADE 13 BLADE
2 7/8 API
PCD 5 1/8’’
BF00005185
5 1/8’’
5 BLADE 16 BLADE
2 7/8 API
PCD 5 1/8’’
BF00005186
5 5/8’’
5 BLADE 16 BLADE
3 1/2 API
PCD 5 5/8’’
BF00005187
5 7/8’’
5 BLADE 13 WING
3 1/2 REG API
PCD 5 7/8’’
BF00005966
4 3/4’’
5 BLADE 13 WING
2 7/8 REG API
PCD 4 3/4’’
BF00005968
4 3/4’’
3 BLADE 13 WING
2 7/8 REG API
PCD 4 3/4’’
BF00005969
4 1/2 API
PCD 7 7/8’’ 5 WING SINGLE ROW16 MM CUTTERS 4 1/4’’API THREAD
BF00005970
7 7/8’’
3 BLADE 16 WING
Sandvik Mining Exploration
46
Nominal In- Casing CouRecommended Bit Size DiameSize OD Weight Per Foot Wall ThickAPI Drift Diamside Diameter pling OD inchter Inches Nominal Ibs ness inches eter inches Inches es Inches mm
9.5 10.5 11.6 13.5 11.50 13.00 15.00 18.00 14.00 15.50 17.00 20.00 25.00 20.00 24.00 28.00 32.00 17.00 20.00 23.00 26.00 29.00 32.00 35.00 38.00
0.205 0.224 0.250 0.290 0.220 0.253 0.296 0.362 0.244 0.275 0.304 0.361 0.415 0.288 0.352 0.417 0.475 0.231 0.272 0.317 0.362 0.408 0.453 0.498 0.540
4.090 4.052 4.000 3.920 4.560 4.494 4.408 4.276 5.012 4.950 4.892 4.778 4.670 6.049 5.921 5.791 5.675 5.538 6.456 6.366 6.276 6.184 6.094 6.004 5.920
5.000 5.000 5.000 5.000 5.653 5.653 5.653 5.653 6.050 6.050 6.050 6.050 6.050 7.390 7.390 7.390 7.370 7.656 7.656 7.656 7.656 7.656 7.656 7.656 7.656
3.965 3.927 3.875 3.795 4.435 4.369 4.283 4.151 4.887 4.825 4.767 4.653 4.545 5.925 5.796 5.666 5.550 6.413 6.331 6.241 6.151 6.059 5.969 5.879 5.795
3 7/8 3 7/8 3 7/8 3 3/4 4 1/4 4 1/4 4 1/4 4 1/8 4 7/8 4 3/4 4 3/4 4 5/8 4 1/2 5 7/8 5 3/4 5 5/8 5 1/4 6 1/4 6 1/4 6 1/4 6 1/8 6 5 7/8 5 7/8 5 3/4
98.4 98.4 98.4 95.2 107.9 107.9 107.9 104.8 123.8 120.7 120.7 117.5 114.3 149.2 146.1 142.00 133.4 158.7 158.7 158.7 155.5 152.4 149.2 149.2 146.1
7 5/8
24.00 26.20 29.70 33.70 39.00
0.300 0.328 0.375 0.430 0.500
7.025 6.969 6.875 6.765 6.625
8.500 8.500 8.500 8.500 8.500
6.900 6.844 6.750 6.640 6.500
6 3/4 6 3/4 6 3/4 6 1/2 6 1/2
171.4 171.4 171.4 165.1 165.1
8 5/8
24.00 28.00 32.00 36.00 40.00 44.00 49.00
0.264 0.304 0.352 0.400 0.450 0.500 0.557
8.097 8.017 7.921 7.825 7.725 7.625 7.511
9.625 9.625 9.625 9.625 9.625 9.625 9.625
7.972 7.892 7.796 7.700 7.600 7.500 7.386
7 7/8 7 7/8 7 5/8 7 5/8 6 1/4 6 1/4 6 1/4
200.0 200.0 193.7 193.7 171.4 171.4 171.4
4 1/4
5
5 1/2
6 5/8
7
47 Sandvik Mining Exploration
INFORMATION
PCD Dimensions
PCD WATER FLOW INFORMATION
Nozzle Flow Area ( square inches ) Nozzle
1 Nozzle
2 Nozzle
3 Nozzle
4 Nozzle
5 Nozzle
6 Nozzle
8 Nozzle
9 Nozzle 10 Nozzle
7/32
0.0375
0.0751
0.1127
0.1503
0.1879
0.2254
8/32
0.0490
0.0981
0.1472
0.1963
0.2454
0.2945
0.3436
0.3006
0.3382
0.3758
0.3926
0.4417
0.4908
9/32
0.0621
0.1242
0.1863
0.2485
0.3106
0.3727
10/32
0.0766
0.1533
0.2300
0.3067
0.3834
0.4601
0.4348
0.4970
0.5591
0.6212
0.5368
0.6135
0.6902
0.7669
11/32
0.0928
0.1856
0.2784
0.3712
0.4640
12/32
0.1104
0.2208
0.3313
0.4417
0.5522
0.5568
0.6496
0.7424
0.8352
0.9280
0.6626
0.7731
0.8835
0.9940
1.1044
13/32
0.1296
0.2592
0.3888
0.5184
14/32
0.1503
0.3006
0.4509
.06013
0.6481
0.7777
0.9073
1.0369
1.1665
1.2962
0.7516
0.9019
1.0523
1.2026
1.3529
1.5036
15/32
0.1725
0.3451
0.5177
16/32
0.1963
0.3926
0.5890
0.6902
0.8628
1.0354
1.2080
1.3805
1.5531
1.7257
0.7853
0.9817
1.1780
1.3744
1.5707
1.7671
1.9634
18/32
0.2485
0.4970
19/32
0.2769
0.5535
0.7455
0.9940
1.2425
1.4910
1.7395
1.9880
2.2365
2.4850
0.8306
1.1075
1.3844
1.6613
1.9382
2.2151
2.4919
2.7688
20/32
0.3067
21/32
0.3382
0.6135
0.9203
1.2271
1.5339
1.8407
2.1475
2.4543
2.7611
3.0679
0.6765
1.0147
1.3530
1.6912
2.0295
2.3677
2.7059
3.0442
3.3824
22/32 23/32
0.3712
0.7424
1.1137
1.4848
1.8561
2.2273
2.5985
2.9697
3.3410
3.7122
0.4057
0.8115
1.2172
1.6220
1.0287
2.4344
2.8402
3.2459
3.6516
4.0574
24/32
0.4417
0.8835
1.3253
1.7671
2.2089
2.6507
3.0925
3.5342
3.9760
4.4178
25/32
0.4794
0.9587
1.4381
1.3175
1.0287
2.3968
2.8762
3.3560
4.3143
4.7937
26/32
0.5184
1.0369
1.5554
2.0739
2.5924
3.1109
3.6293
4.1478
4.6663
5.1848
27/32
0.5591
0.1183
1.6774
1.2365
1.7957
3.3548
3.9139
4.4731
5.0322
5.5914
28/32
0.6013
1.2026
1.8039
2.4052
3.0065
3.6079
4.2092
4.8015
5.4118
6.0131
29/32
0.6450
0.2901
1.9351
2.5802
3.2252
3.8702
4.5153
5.1603
5.8053
6.4504
30/32
0.6903
1.3806
2.0709
2.7612
3.4515
4.1417
4.8320
5.5223
6.2126
6.9021
Diameter Inches
API Connection inches
7 Nozzle 0.2630
Recommended Torque Ft/Lbs
3-1/2 to 4-1/2
2-3/8 REG
3.3
kNm ( 2400 ft-Ibs )
4-5/8 to 4-7/8
2-7/8 REG
6.2
kNm ( 4600 ft-Ibs )
5 to 7-1/4
3-1/2 REG
8.5
kNm (6300 ft-Ibs )
7 -1/2 to 9-1/2
4-1/2 REG
22.4 kNm (16500 ft-Ibs )
9-7/8 to 14-1/2
6-5/8 REG
65.6 kNm (48300 ft-Ibs )
48 Sandvik Mining Exploration
Bit Condition Analysis Optimal Wear Behaviour Surface feels sharp to the touch.
Even wear profile.
OD and ID are in tolerance.
Geology:- Correct bit choice for ground conditions. Drilling Parameters:- RPM, feed pressure and water flow are optimised. Bit Selection:- Diamond and matrix matched to formation. Correct bit selected.
Sub-Optimal Wear Behaviour-Glazed or Polished
Surface feels smooth to the touch. Smearing of matrix.
The diamonds may be too ‘strong’ for the conditions and are flatting rather than fracturing. Reducing clearance between matrix and formation.
Possible Cause / Solution Geology:- Encountered hard, non-abrasive ground. Drilling Parameters: - Water flow rates may be too high-Reduce water flow. Underfeeding causes diamond polishing-Increase WOB and/or reduce RPM.
49 Sandvik Mining Exploration
Sub-Optimal Wear Behaviour- Concave Face Preferential wear towards ID. Rounding at ID to face corner. Loss of ID gauge, reaming required when using follow up bit Premature retrieval of bit through uneven wear profile.
Possible Cause / Solution Geology:- Encountered fractured abrasive rock or core grinding-Do not overfeed. The Hole is not clean at the start of the run,-Proceed slowly off the bottom of the hole prior to the start of the run, preventing sudden contact with debris. Drilling Parameters:- Water flow too low-Check for pump leakage in the drill string and/or increase water flow -Check and adjust length of inner tube. Overfeeding-Increase RPM and/or decrease weight on bit (WOB). Bit Selection:- Use a lower series bit with a harder matrix.
Sub-Optimal Wear Behaviour- Convex Face
Preferential wear towards OD.
Rounding at OD to face corner.
Loss of OD gauge, reaming required when using follow up bit
Premature retrieval of bit through uneven wear profile.
Possible Cause / Solution Geology:- Encountered fractured and broken ground. Drilling over core or reaming through an undersized or collapsed hole-Check the diameter of the reaming shell. Drilling Parameters:- Underfeeding-Increase RPM consistent with rate of penetration (ROP) or reduce ROP for the RPM used. Poor core barrel stability or drill string vibrations-Check/remove bent rods and increase mud viscosity and/or lubricate by coating the string with rod grease. Lack of circulation fluid-Increase coolant flow rate Bit Selection:- Change the reaming shell if undersize. 50 Sandvik Mining Exploration
Sub-Optimal Wear Behaviour- Burnt Bit Face
Blackened bit face.
Lost or smeared matrix.
Waterways are closed.
Possible Cause /Solution Geology:- Encountered much fractured formation. Plugging of the waterways when drilling through soft and sticky mud seams. Drilling Parameters:- Insufficient water-Check pump, joints, leaks or inner tube clearance if all is satisfactory increase pump pressure. Bit Selection:- Unlikely to be the cause. ALERT! Be careful when restarting the drilling, if there are broken rock or cave-in at the bottom of the hole proceed slowly and try to make the rock pieces move into the inner tube rather than drilling the broken rock. Make sure that there is plenty of water passing the bit, be careful with the feed pressure, and hold back on the rotation speed.
51 Sandvik Mining Exploration
Core Drilling Tools Diamond drill bits and tools Sandvik offers an excellent assortment of diamond tools for the exploration and construction industries, including surface set and impregnated bits, reaming shells and casing shoes suitable for most drilling conditions. Drill rods and casing Sandvik has significant investment in the state-of the art production of Wireline drill rod and casing. Through stringent developmental practices, and testing in partnership with key customers, Sandvik is able to offer a superior product to the market. Core barrels Sandvik offers core barrel systems for vertical down to -45° angle holes, as well as pump-in systems for uphold drilling. Both supported by retrieval overshot devices.
52 Sandvik Mining Exploration
Core Barrel System
Sandvik Core Barrel System
53 Sandvik Mining Exploration
UNIQUE NSU COMPONENTS 1. Complete NSU head assembly 2. Latch (2x) 3. Spring pin (2x) 4. LS spacer 5. Landing shoulder 6. Washer (2x) 7. Shut off valve (2x) 8. Spacer 9. Nut 10. Inner tube connection NSU
UNIQUE NSU COMPONENTS 11. Spacer tube 12. Latch (2x) 13. Spring pin (2x) 14. LS spacer 15. Landing shoulder 16. Spacer (washer) 17. Shut off valve (2x) 18. Washer (2x) 19. Stabilising tube 20. Spacer tube 21. Nut 22. Inner tube connection HSU 23. Spring pin
Items shown in grey are common components to both NSU and HSU. The items in colour are unique components for each system. 54 Sandvik Mining Exploration
55 Sandvik Mining Exploration
MULTIFUNCTIONAL SYSTEM FOR BOTH SURFACE AND UNDERGROUND APPLICATIONS WITH PATENTED iQ-FCV VALVE PRODUCTIVITY AND INTELLIGENCE The newly patented iQ-FCV valve provides and maintains a constant alert via sustained high water pressure, assuring the operator that the inner tube assembly has positively latched into the core barrel, hence eliminating mislatches Water efficiency – the iQ-FCV valve always retains the volume of water in the drill string, even in broken ground or dry holes. Simplified overshot attachment to Wireline no longer requires cable eyes or cable splicing, enabling easier maintenance and repair in the field. he new logic tip on the overshot allows for in-hole dry releasing of the inner tube assembly once the water level has been reached, shortening the release time. Pump-in overshot features a ball valve indicator which alerts the operator of positive latching onto the core barrel’s back end. DURABILITY AND SPEED The stronger and smarter latching arrangement of the safety overshot to the back end eliminates the requirement of a secondary safety sling. The floating latches allow excessive drilling forces to be transferred to the main body and not onto the latch itself. A bypass valve on the pump-in overshot coupled with wider openings in the back end allow for faster retrieval of inner tube.
COST-EFFICIENT Multifunctional system for both surface and underground applications; no need for different coring tools systems. coring tools systems. A single core barrel back end for both standard and pump-in applications provides greater flexibility. Net working capital is reduced due to fewer parts and spare parts inventory. Wear parts are minimized and the high wearing landing shoulder can quickly and easily be interchanged. SAFETY The system is user-friendly and designed for safer handling.
The intelligent overshot (patented) is automatically latch-locking and latches can be released without the presence of fingers in potentially high risk areas.
The back end is shorter and lighter, making it easier to handle, especially on smaller machines such as underground drills. .
The knuckle joint featured on the overshot allows for ease of handling, especially in confined underground drilling spaces The load-rated breakaway safety pins provide a safer way to release the overshot from stuck inner tubes.
56 Sandvik Mining Exploration
CORING AFTERMARKET WIRELINE CORE BARREL NSU/N2SU/N3SU MULTIFUNCTIONAL SYSTEM FOR STANDARD AND PUMP-IN APPLICATIONS
The new multifunctional NSU (N surface and underground) core barrel system from Sandvik features interchangeable components and offers standard and pump-in applications in a single system. The NSU system will not only offer greater flexibility, but also a more cost-efficient solution, greater safety and increased productivity. The system is user-friendly and designed for safer handling. There is no need for different coring tool systems as this multifunctional system is ideal for both surface and underground applications. At Sandvik, we offer a superior product range and are always ready to assist you, wherever you are, thanks to our worldwide presence. Contact your Sandvik representative today. Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
57 Sandvik Mining Exploration
NSU Wireline Core Barrels
1
Item
Part number
Description
1-11
BF00008322
NSU core barrel assembly 1.5 m (5ft)
1-11
BF00008371
NSU core barrel assembly 3.0 m (10ft)
1-5
BF00008461
NSU inner tube assembly 1.5 m (5ft)
1-5
BF00008372
NSU inner tube assembly 3.0 m (10ft)
1
BF00007369
NSU/N3SU head assembly
6
NSU Inner Tube Components
7
8
9 2
3
10
Item
Part number
Description
Qty
1
BF00007369
Head assembly NSU
1
2
BA00000148
Inner tube N/N3 1.5 m (5ft)
1
2
BA00000149
Inner tube N/N3 3.0 m (10ft)
1
3
BA00000120
Stop ring N
1
4
BA00000118
Core lifter N
1
5
BA00000154
Core lifter case N
1
-
BB00001075
Inner tube wrench (full-grip)
2
NSU/N3SU Outer Tube Components Item
Part number
Description
6
BA00000156
Locking coupling N/N2/N3 - full hole
Qty 1
7
BA00000147
Adapter coupling
1
8
BA00000121
Landing ring N
1
9
BA00000126
Outer tube N/N2/N3 1.5 m (5ft)
1
9
BA00000127
Outer tube N/N2/N3 3.0 m (10ft)
1
10
BA00000122
Inner tube stabilizer N/N3
1
11
BA00000268
Thread protector N/N2/N3
1
–
BB00001076
Outer tube wrench
2
Options to Standard Configuration 4 11 5
Item
Part number
Description
2
BB00000144
Inner tube 1.5 m (5 ft) - chrome plated
2
BB00000145
Inner tube 3.0 m (10 ft) - chrome plated
4
BB00001037
Core lifter - smooth
4
BB00000999
Core lifter - slotted
6
BB00000063
Locking coupling - full hole, tanged, N
6
BB00000064
Locking coupling - full hole, NT
6
BB00000065
Locking coupling - full hole, tanged, NT
6
BF00004519
Locking coupling - full hole, NHD
6
BF00004520
Locking coupling - full hole, tanged NHD
9
BF00004538
Outer tube 1.5 m (5 ft) - chrome plated
9
BF00004539
Outer tube 3.0 m (10 ft) - chrome plated
9
BF00002334
Outer tube 1.5 m (5 ft) - full hole
9
BF00002331
Outer tube 3.0 m (10 ft) - full hole
9
BF00005283
Outer tube 3.0 m (10 ft) - chrome plated full hole
Extended 6m NSU Core Barrel Components Item
Part number
Description
Qty
9
BA00000127
Outer tube N/N2/N3 3.0 m (10ft)
2
10
BA00000122
Inner tube Stabilizer N/N3
2
2
BA00000149
Inner tube N/N3 3.0 m (10ft)
2
–
BB00000066
Inner tube coupling N/N3
1
Note: To convert your system to the Sandvik NSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool
2
58 Sandvik Mining Exploration
NSU/N3SU Head Assembly
1
Part number
Description
1-35
BF00007369
Head Assembly NSU/N3SU
Qty 1
NSU/N3SU Head Assembly Components Item
Part number
Description
Qty
1
BF00007129
Latch body
1
2
BF00007125
Latch
2
3
3
BF00001150
Spring pin
2
4 5 6
4
BF00001145
Spring pin
2
5
BF00001110
O-ring
1
6
BF00008320
Stop ring
1
7
BF00008318
Landing shoulder
1
8
BF00007089
iQ valve (release valve)
1
9
BF00001096
Socket set screw
1
2
10
Item
7
11
8 9
10
BF00008927
LS spacer
1
13
12
11
BF00007742
Pin
1
14 15
12
BF00008464
Spring
1
13
BF00007741
Release tube
1
14
BF00007097
Shaft
1
15
BF00008099
Valve body
1
16
BF00008100
Nut
1
17
BA00000139
Shut off valve - hard
2
20
18
BA00000153
Washer
2
21
23
19
BF00008317
Spacer
1
22
24
16 18
17 19
20
BF00001126
Thrust bearing
1
25
21
BF00001165
Ball bearing
1
26
22
BF00001101
Washer
1
23
BF00007137
Upper bearing housing
1
24
BF00001185
Compression spring
1
25
BF00000103
Bushing
1
26
BF00001125
Ball bearing
1
27
BF00001100
Washer
1
28
BF00001094
Nut locking
1
29
BF00008327
Lower bearing housing
1
30
BF00001143
Grease fitting
1
31
BF00007361
Nut
1
32
BF00001159
Pin
1
33
BA00000132
Ball
1
34
BA00000155
Check valve body
1
35
BF00007281
Inner tube connection NSU
1
28
27 29 30
31 32 33 35
34
Options to Standard Configuration Item
Part number
Description
17
BA00000138
Shut off valve - soft
Qty 2
-
BF00008828
Seal ring
1
Note: To convert your system to the Sandvik NSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool
59 Sandvik Mining Exportaion
N3SU Wireline Core Barrels Item
Part number
Description
1-16
BF00008741
N3SU core barrel assembly 1.5 m (5ft)
1-16
BF00008742
N3SU core barrel assembly 3.0 m (10ft)
1-10
BF00008739
N3SU inner tube assembly 1.5 m (5ft)
1-10
BF00008740
N3SU inner tube assembly 3.0 m (10ft)
1
BF00007369
NSU/N3SU head assembly
N3SU Inner Tube Components 1
2 11 3
4
12
13
14
9 6
Part number
Description
Qty
1
BF00007369
Head assembly
1
2
BA00000197
O-ring
1
3
BA00000198
Piston
1
4
BA00000148
Inner tube 1.5 m (5 ft)
1
4
BA00000149
Inner tube 3.0 m (10 ft)
1
5
BF00006313
Split tube 1.5m (5ft) TRSS Sandvik
1
5
BF00006307
Split tube 3.0m (10ft) TRSS Sandvik
1
5
BF00006310
Split tube 6.0m (20ft) TRSS Sandvik
1
6
BA00000210
Stop ring
1
7
BA00000223
Core lifter - fluted
1
8
BA00000222
Core lifter case
1
9
BA00000382
Pump-out adapter
1
10
BA00000386
Piston plug
1
NSU/N3SU Outer Tube Components
5
10
Item
15
Item
Part number
Description
11
BA00000156
Locking coupling - full hole
Qty 1
12
BA00000147
Adapter coupling
1
13
BA00000121
Landing ring
1
14
BA00000126
Outer tube 1.5 m (5 ft)
1
14
BA00000127
Outer tube 3.0 m (10 ft)
1
15
BA00000122
Inner tube stabilizer
1
16
BA00000268
Thread protector
1
Options to Standard Configuration
7 16 8
Item
Part number
Description
7
BF00004985
Core lifter - smooth
7
BF00005028
Core lifter - slotted
8
BF00008375
Basket core retainer N3
11
BB00000063
Locking coupling - full hole, tanged, N
11
BB00000064
Locking coupling - full hole, NT
11
BB00000065
Locking coupling - full hole, tanged NT
11
BF00004519
Locking coupling - full hole, NHD
11
BF00004520
Locking coupling - full hole, tanged NHD
14
BF00004538
Outer tube 1.5 m (5 ft) - chrome plated
14
BF00004539
Outer tube 3.0 m (10 ft) - chrome plated
14
BF00002334
Outer tube 1.5 m (5 ft) - full hole
14
BF00002331
Outer tube 3.0 m (10 ft) - full hole
14
BF00005283
Outer tube 3.0 m (10 ft) - chrome plated full hole
Extended 6m N3SU Core Barrel Components
Note: To convert your system to the Sandvik NSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool
Item
Part number
Description
14
BA00000127
Outer tube N/N2/N3 3.0 m (10ft)
2
15
BA00000122
Inner tube stabilizer N/N3
2
4
BA00000149
Inner tube N/N3 3.0 m (10ft)
2
-
BB00000066
Inner tube coupling N/N3
1
5
BF00006310
Split tube N3 6.0 m (20ft) TRSS
1
-
BB00001405
Piston extender N/N3
1
60 Sandvik Mining Exploration
Qty
NSU/N3SU Head Assembly
1
Part number
Description
1-35
BF00007369
Head assembly NSU/N3SU
Qty 1
NSU/N3SU Head Assembly Components Item
Part number
Description
Qty
1
BF00007129
Latch body
1
2
BF00007125
Latch
2
3
3
BF00001150
Spring Pin
2
4 5 6
4
BF00001145
Spring Pin
2
5
BF00001110
O-ring
1
6
BF00008320
Stop ring
1
7
BF00008318
Landing shoulder
1
8
BF00007089
iQ valve (Release Valve)
1
9
BF00001096
Socket set screw
1
2
10
Item
7
11
8 9
10
BF00008927
LS spacer
1
13
12
11
BF00007742
Pin
1
14 15
12
BF00008464
Spring
1
13
BF00007741
Release tube
1
14
BF00007097
Shaft
1
15
BF00008099
Valve body
1
16
BF00008100
Nut
1
17
BA00000139
Shut off valve - hard
2
20
18
BA00000153
Washer
2
21
23
19
BF00008317
Spacer
1
22
24
16 18
17 19
20
BF00001126
Thrust bearing
1
25
21
BF00001165
Ball bearing
1
26
22
BF00001101
Washer
1
23
BF00007137
Upper bearing housing
1
24
BF00001185
Compression spring
1
25
BF00000103
Bushing
1
26
BF00001125
Ball bearing
1
27
BF00001100
Washer
1
28
BF00001094
Nut locking
1
29
BF00008327
Lower bearing housing
1
30
BF00001143
Grease fitting
1
31
BF00007361
Nut
1
32
BF00001159
Pin
1
33
BA00000132
Ball
1
34
BA00000155
Check valve body
1
35
BF00007281
Inner tube connection NSU
1
28
27 29 30
31 32 33 35
34
Options to Standard Configuration Item
Part number
Description
17
BA00000138
Shut off valve - soft
Qty 2
-
BF00008828
Seal ring
1
Note: To convert your system to the Sandvik NSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool
61 Sandvik Mining Exploration
N2SU Wireline Core Barrels
1
Item
Part number
Description
1-11
BF00008401
N2SU core barrel assembly 1.5 m (5ft)
1-11
BF00008402
N2SU core barrel assembly 3.0 m (10ft)
1-5
BF00008460
N2SU inner tube assembly 1.5 m (5ft)
1-5
BF00008403
N2SU inner tube assembly 3.0 m (10ft)
1
BF00008404
N2SU head assembly
6
N2SU Inner Tube Components
7
8
9 2
3
10
Item
Part number
Description
Qty
1
BF00008404
Head assembly N2SU
1
2
BA00000218
Inner tube N2 1.5 m (5ft)
1
2
BA00000219
Inner tube N2 3.0 m (10ft)
1
3
BA00000215
Stop ring N2
1
4
BA00000217
Core lifter N2
1
5
BA00000216
Core lifter case N2
1
–
BB00000325
Inner tube wrench
2
N2SU Outer Tube Components Item
Part number
Description
6
BA00000156
Locking coupling N/N2/N3 - full hole
Qty 1
7
BA00000147
Adaptor coupling
1
8
BA00000221
Landing ring N2
1
9
BA00000126
Outer tube N/N2/N3 1.5 m (5ft)
1
9
BA00000127
Outer tube N/N2/N3 3.0 m (10ft)
1
10
BA00000140
Inner tube stabilizer N2
1
11
BA00000268
Thread protector N/N2/N3
1
–
BB00001076
Outer tube wrench
2
Options to Standard Configuration 4 11 5
Item
Part number
Description
2
BF00004523
Inner tube 1.5 m (5 ft) - chrome plated
2
BF00004524
Inner tube 3.0 m (10 ft) - chrome plated
4
BF00004984
Core lifter - smooth
4
BF00005027
Core lifter - slotted
6
BB00000063
Locking coupling - full hole, tanged, N
6
BB00000064
Locking coupling - full hole, NT
6
BB00000065
Locking coupling - full hole, tanged, NT
6
BF00004519
Locking coupling - full hole, NHD
6
BF00004520
Locking coupling - full hole, tanged NHD
9
BF00004538
Outer tube 1.5 m (5 ft) - chrome plated
9
BF00004539
Outer tube 3.0 m (10 ft) - chrome plated
9
BF00002334
Outer tube 1.5 m (5 ft) - full hole
9
BF00002331
Outer tube 3.0 m (10 ft) - full hole
9
BF00005283
Outer tube 3.0 m (10 ft) - chrome plated full hole
Extended 6m N2SU Core Barrel Components Item
Part number
Description
Qty
9
BA00000127
Outer tube N/N2/N3 3.0 m (10ft)
2
10
BA00000140
Inner tube stabilizer N2
2
2
BA00000219
Inner tube N2 3.0 m (10ft)
1
–
BF00002526
Inner tube extension N2 (3.4 m)
1
Note: To convert your system to the Sandvik NSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool
62 Sandvik Mining Exploration
N2SU Head Assembly
1
Part number
Description
1-35
BF00008404
Head assembly N2SU
Qty 1
N2SU Head Assembly Components Item
Part number
Description
Qty
1
BF00007129
Latch body
1
2
BF00007125
Latch
2
3
3
BF00001150
Spring pin
2
4 5 6
4
BF00001145
Spring pin
2
5
BF00001110
O-ring
1
6
BF00008320
Stop ring
1
7
BF00008319
Landing shoulder N2
1
8
BF00007089
iQ valve (release valve)
1
9
BF00001096
Socket set screw
1
2
10
Item
7
11
8 9
10
BF00008927
LS spacer
1
13
12
11
BF00007742
Pin
1
14 15
12
BF00008464
Spring
1
13
BF00007741
Release tube
1
14
BF00007097
Shaft
1
15
BF00008099
Valve body
1
16
BF00008100
Nut
1
17
BA00000139
Shut off valve - hard
2
20
18
BA00000153
Washer
2
21
23
19
BF00008317
Spacer
1
22
24
16 18
17 19
20
BF00001126
Thrust bearing
1
25
21
BF00001165
Ball bearing
1
26
22
BF00001101
Washer
1
23
BF00007137
Upper bearing housing
1
24
BF00001185
Compression spring
1
25
BF00000103
Bushing
1
26
BF00001125
Ball bearing
1
27
BF00001100
Washer
1
28
BF00001094
Nut locking
1
29
BF00008327
Lower bearing housing
1
30
BF00001143
Grease fitting
1
31
BF00007361
Nut
1
32
BF00001159
Pin
1
33
BA00000132
Ball
1
34
BA00000155
Check valve body
1
35
BF00007520
Inner tube connection N2
1
28
27 29 30
31 32 33 35
34
Options to Standard Configuration Item
Part number
Description
17
BA00000139
Shut off valve - soft
Qty 2
-
BF00008828
Seal ring
1
Note: To convert your system to the Sandvik NSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool
63 Sandvik Mining Exploration
NSU/N2SU/N3SU Wireline Core Barrel Consumables Kit 1 11 2 12 3
13 4
5
6
Item
Part number
Description
Qty
1-15
BF00008743
Consumables kit
-
1
BF00001110
O-ring
2
2
BF00007125
Latch
4
3
BF00008318
Landing shoulder
2
4
BA00000139
Shut-off valve - hard
4
5
BF00001126
Thrust bearing
2
6
BF00001165
Ball bearing
2
7
BF00001125
Ball bearing
2
8
BF00001094
Nut locking
1
9
BF00001143
Grease fitting
2
10
BA00000132
Ball
1
11
BA00000120
Stop ring
5
12
BA00000118
Core lifter
20
13
BA00000154
Core lifter case
5
14
BA00000121
Landing ring
2
15
BA00000122
Inner tube stabilizer
4
14
N2SU Wireline Core Barrel Consumables Kit 7
8
15
9 10
Item
Part number
Description
Qty
1-15
BF00008744
Consumables kit
-
1
BF00001110
O-ring
2
2
BF00007125
Latch
4
3
BF00008319
Landing shoulder
2
4
BA00000139
Shut-off valve - hard
4
5
BF00001126
Thrust bearing
2
6
BF00001165
Ball bearing
2
7
BF00001125
Ball bearing
2
8
BF00001094
Nut locking
1
9
BF00001143
Grease fitting
2
10
BA00000132
Ball
1
11
BA00000215
Stop ring
5
12
BA00000217
Core lifter
20
13
BA00000216
Core lifter case
5
14
BA00000221
Landing ring
2
15
BA00000140
Inner tube stabilizer
4
N3SU Wireline Core Barrel Consumables Kit
Note: To convert your system to the Sandvik NSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool
Item
Part number
Description
1-15
BF00008745
Consumables kit
-
1
BF00001110
O-ring
2
2
BF00007125
Latch
4
3
BF00008318
Landing shoulder
2
4
BA00000139
Shut-off valve - hard
4
5
BF00001126
Thrust bearing
2
6
BF00001165
Ball bearing
2
7
BF00001125
Ball bearing
2
8
BF00001094
Nut locking
1
9
BF00001143
Grease fitting
2
10
BA00000132
Ball
1
11
BA00000210
Stop ring
5
12
BA00000223
Core lifter
20
13
BA00000222
Core lifter case
5
14
BA00000121
Landing ring
2
15
BA00000122
Inner tube stabilizer
4
64 Sandvik Mining Exploration
Qty
1
Part number
Description
1-19
BG00481050
Overshot Assembly NSU, Pump-In
1
BG00482740
Wire Clamp
1
2
BG00489395
Set Screw
3
3
BG00488270
Bearing Shaft
1
4
BF00001182
Shear Pin
1
7
5
BG00486947
Bearing Housing
1
8
6
BF00005202
Grease nippel
1
7
300-027-257
Pin
1
8
BF00008200
Steel ball
2
9
BF00008243
Spring
1
10
BG00486949
Sleeve
1
11
BF00006562
Seal ring
2
12
BF00006563
Guide
1
13
BF00006565
Valve housing
1
14
BF00006564
Seal Housing
1
15
BA00000131
Landing Indicator Bushing
1
16
BA00000132
Stainless Steel Ball 22 mm
1
17
BF00001146
Spring Pin
1
18
BF00000124
Lifting Tip
1
19
BG00487308
Spring guide
1
2
3 4 5 6 19 9
10
11
Pump-In NSU Overshot Item
12 13
14 15 16 17
18
65 Sandvik Mining Exploration
Qty
Free Falling NSU Overshot
1 2 3 4 5 6
Item
Part number
Description
1-13
BF00008400
Overshot assembly NSU, free falling
–
1
BF00000237
Wire clamp
1
2
BF00001194
Set screw
3
3
BF00000238
Bearing shaft
1
4
BF00001182
Shear pin
1
5
BF00000231
Bearing housing
1
19
6
BF00001153
Spring pin
1
20
7
BF00008392
Wire weight
1
8
BF00000372
Screw
3
9
BF00003994
Wheel
3
10
BF00001154
Spring pin
1
11
BF00008559
Detent plunger
1
12
BF00001191
Compression spring
1
13
BF00007371
Logic tip assembly
1
14
BG00502961
Sleeve
1
15
BG00507346
Screw
2
14 17 15 16 18
17 19
7
21
8 9
22 23
Qty
24 8 9
9 8
10 11 12
Logic Tip Assembly
30 29 26 28 27
Item
Part number
Description
Qty
14-24
BF00007371
Logic tip assembly
1
14
BF00008384
Lower link
1
15
BF00001146
Spring pin
1
16
BF00007197
Inner shaft
1
17
BF00008200
Steel ball
2
18
BF00008243
Detent spring
1
19
BF00007292
Screw
2
20
BF00007229
Outer tube
1
21
BF00007498
Compression spring
1
22
BF00007291
Screw (logic gate)
1
23
BF00007147
Lifting tip
1
24
BF00007128
Logic sleeve
1
Wire Weight Extension Assembly Option
13
28 27
Item
Part number
Description
26-30
BG00486000
Wire Weight Extension Assembly
26
BF00008392
Wire Weight
1
27
BF00001194
Screw
3
28
BF00003994
Wheel
3
29
BF00001153
Spring Pin
1
30
BG00466008
Wire Weight Adapter
1
27 28
66 Sandvik Mining Exploration
Qty
Seal Sub-Assembly NSU 4.4 Wire Item
Part number
Description
1-3
BF00008393
Seal assembly 4.4 wire (11/64’’)
Qty 1
1
BF00000194
Screw 4.4 (11/64’’)
1
2
BF00000097
Seal 4.4 (11/64’’)
1
3
BF00000191
Spacer 4.4 (11/64’’)
1
Seal Assembly NSU 4.8 Wire Item
Part number
Description
Qty
1-3
BF00008394
Seal assembly 4.8 wire (3/16’’)
1
1
BF00000195
Screw 4.8 (3/16’’)
1
2
BF00000098
Seal 4.8 (3/16’’)
1
3
BF00000192
Spacer 4.8 (3/16’’)
1
Seal Assembly NSU 6.0 Wire 1
2 3
10
Item
Part number
Description
1-3
BF00008395
Seal assembly 6.0 wire (1/4’’)
Qty 1
1
BF00000196
Screw 6.0 (1/4’’)
1
2
BF00000125
Seal 6.0 (1/4’’)
1
3
BF00000193
Spacer 6.0 (1/4’’)
1
4
Stuffing Box N Sub-Assembly NSU
5 6 7 8 9
Item
Part number
Description
4-11
BF00008396
Stuffing box N sub-assembly NSU
1
4
BF00006569
Seal housing
1
5
BF00001111
O-ring
1
6
BF00006701
Spring pin
2
7
BF00006574
Holder
1
8
BF00001170
Grease fitting
1
9
BF00006576
O-ring
1
10
BF00006571
Connector, stuffing box N
1
11
BB00000168
Drill rod N L=600 mm
1
11
Qty
Stuffing Box NT Sub-Assembly NSU Item
Part number
Description
4-11
BF00008397
Stuffing Box NT sub-assembly NSU
Qty 1
4
BF00006569
Seal housing
1
5
BF00001111
O-ring
1
6
BF00006701
Spring pin
2
7
BF00006574
Holder
1
8
BF00001170
Grease fitting
1
9
BF00006576
O-ring
1
10
BF00007745
Connector, stuffing box NT
1
11
BB00000172
Drill rod NT L=600 mm
1
Stuffing Box NHD Sub-Assembly NSU Item
Part number
Description
4-11
BF00008398
Stuffing box NHD sub-assembly NSU
Qty 1
4
BF00006569
Seal housing
1
5
BF00001111
O-ring
1
6
BF00006701
Spring pin
2
7
BF00006574
Holder
1
8
BF00001170
Grease fitting
1
9
BF00006576
O-ring
1
10
BF00007749
Connector, stuffing box NHD
1
11
BF00004276
Drill rod NHD L=600 mm
1
Note: To convert your system to the Sandvik NSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool
67 Sandvik Mining Exploration
Wireline Survey Tool - NSU
12 10 11
9
8 7 6
Item
Part number
Description
Qty
1-12
BG00481619
NSU Survey Tool Assembly
1
1
BG00481684
Thread Adaptor E Rod Pin
1
2
BF00008768
Spring Pin
1
3
BF00008719
Spacer
1
4
BF00008715
Bit Stopper N/N2/N3
1
5
BF00001185
Compression Spring
1
6
BG00485260
Latch Body
1
7
BG00485614
Sleeve
1
8
BG00486584
Rivet
1
9
BF00001145
Pin
2
10
BF00001150
Pin
2
11
BF00001110
O-ring
1
12
BF00007125
Latch
2
5
Wireline Survey Tool - Options 3
Item
Part number
Description
Qty
13
BG00506205
Landing Ring Stopper N2 (Steel)
1
14
BG00506157
Landing Ring Stopper N/N3 (Steel)
1
2 1
Note: To convert your system to the Sandvik NSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool
13
14
68 MINING.SANDVIK.COM
Sandvik Mining Exploration
© Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
4
CORING AFTERMARKET WIRELINE CORE BARREL HSU/H2SU/H3SU MULTIFUNCTIONAL SYSTEM FOR STANDARD AND PUMP-IN APPLICATIONS
The new multifunctional HSU (H surface and underground) core barrel system from Sandvik features interchangeable components and offers standard and pump-in applications in a single system. The HSU system will not only offer greater flexibility, but also a more cost-efficient solution, greater safety and increased productivity. The system is user-friendly and designed for safer handling. There is no need for different coring tool systems as this multifunctional system is ideal for both surface and underground applications. At Sandvik, we offer a superior product range and are always ready to assist you, wherever you are, thanks to our worldwide presence. Contact your Sandvik representative today. Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
69 Sandvik Mining Exploration
HSU Wireline Core Barrels
1
Item
Part number
Description
1-11
BF00008357
HSU Core Barrel Assembly 1.5 m (5ft)
1-11
BF00008358
HSU Core Barrel Assembly 3.0 m (10ft)
1-5
BF00008359
HSU Inner Tube Assembly 1.5 m (5ft)
1-5
BF00008360
HSU Inner Tube Assembly 3.0 m (10ft)
1
BF00008308
HSU/H3SU Head Assembly
6
HSU Inner Tube Components
7
8
9 2
3
10
Item
Part number
Description
Qty
1
BF00008308
Head Assembly HSU
1
2
BA00000174
Inner tube H/H3 1.5 m (5ft)
1
2
BA00000175
Inner tube H/H3 3.0 m (10ft)
1
3
BA00000185
Stop ring H
1
4
BA00000186
Core lifter H
1
5
BA00000188
Core lifter case H
1
-
BB00001076
Inner tube wrench (full-grip)
2
HSU/H3SU Outer Tube Components Item
Part number
Description
6
BA00000208
Locking coupling H/H2/H3 - full hole
Qty 1
7
BF00008462
Adaptor coupling HSU
1
8
BA00000182
Landing ring H/H2/H3
1
9
BA00000199
Outer tube H/H2/N3 1.5 m (5ft)
1
9
BA00000200
Outer tube H/H2/H3 3.0 m (10ft)
1
10
BA00000205
Inner tube stabilizer H/H3
1
11
BA00000204
Thread protector H/H2/H3
1
-
BB00000803
Outer tube wrench
2
Options to Standard Configuration 4 11 5
Item
Part number
Description
2
BB00000139
Inner Tube 1.5 m (5 ft) - Chrome plated
2
BB00000140
Inner Tube 3.0 m (10 ft) - Chrome plated
4
BB00001038
Core lifter - Smooth
4
BB00001001
Core lifter - Slotted
6
BB00000067
Locking coupling - full hole, tanged, H
6
BB00000068
Locking coupling - full hole, HT
6
BB00000069
Locking coupling - full hole, tanged, HT
6
BF00003472
Locking coupling - full hole, HHD
6
BF00005229
Locking coupling - full hole, tanged HHD
9
BF00004540
Outer Tube 1.5 m (5 ft) - Chrome plated
9
BF00004541
Outer Tube 3.0 m (10 ft) - Chrome plated
9
BF00002335
Outer Tube 1.5 m (5 ft) - Full hole
9
BF00002332
Outer Tube 3.0 m (10 ft) - Full hole
9
BF00005306
Outer Tube 1.5 m (5 ft) - Chrome plated full hole
9
BF00005285
Outer Tube 3.0 m (10 ft) - Chrome plated full hole
Extended 6m NSU Core Barrel Components Item
Part number
Description
9
BA00000199
Outer tube H/H2/H3 1.5 m (5ft)
Qty 1
10
BA00000205
Inner tube stabilizer H/H3
1
2
BA00000175
Inner tube H/H3 3.0 m (10ft)
1
-
BB00000070
Inner Tube Coupling H/H3
1
Note: To convert your current system to the Sandvik HSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool 1 x Adaptor coupling HSU
70 Sandvik Mining Exploration
HSU/H3SU Head Assembly Item
Part number
Description
1-40
BF00008308
Head Assembly HSU/H3SU
Qty 1
HSU/H3SU Head Assembly Components Item
Part number
Description
Qty
1
BF00007129
Latch Body
1
2
BF00007627
Latch HSU
2
3
BF00008471
Spring Pin
2
4
BF00001145
Spring Pin FRP 3x26
2
5
BF00001110
O-Ring
1
6
BF00008320
Stop Ring
1
7
BF00008354
Landing Shoulder HSU
1
7
8
BF00007089
iQ Valve (Release Valve)
1
BF00001096
Socket Set Screw M6x10
1
10
8 9
9 10
BF00007742
Pin 5x55
1
12
11
11
BF00008464
Spring
1
12
BF00007741
Release Tube
1
13
BF00007097
Shaft
1
14
BF00008099
Valve Body
1
15
BF00008100
Nut
1
16
BA00000181
Shut Off Valve - hard
2
19 22
17
BA00000171
Washer
1
18
BF00008342
Spacer Washer HSU
1
23
19
BF00001126
Thrust Bearing
1
35
1 2
40
3 4 5 6
37
15 38
13 14 16 18
17
20 21 24 25 27 36
20
BF00001165
Ball Bearing 6204
1
26 28
21
BF00001101
Washer BRB 21.0 fzb
1
22
BF00007137
Upper Bearing Housing
1
29
23
BF00001185
Compression Spring
1
24
BF00000103
Bushing
1
25
BF00001125
Ball Bearing 6202
1
26
BF00001100
Washer BRB 15.0 fzb
1
27
BF00001094
Nut Loc-King
1
28
BF00008327
Lower Bearing Housing
1
29
BF00001143
Grease Fitting 1/8"
1
30
BF00007636
Nut
1
31
BF00001159
Pin
1
32
BA00000132
Ball
1
33
BA00000155
Check valve body
1
34
BF00007635
Inner Tube Connection HSU
1
35
BF00008311
Spacer Tube HSU
1
36
BF00008312
Spacer Tube HSU
1
37
BF00008997
LS Spacer HSU
1
38
BF00008340
Stabilizing Tube
1
39
BF00008344
Spring Pin FRP 10x65
1
40
BF00001080
O-Ring
1
39
30 31
34
32 33
Options to Standard Configuration Item
Part number
Description
16
BA00000180
Shut Off Valve - soft
Qty 2
-
BF000008513
Seal ring
1
Note: To convert your current system to the Sandvik HSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool 1 x Adaptor coupling HSU
71 Sandvik Mining Exploration
H3SU Wireline Core Barrels Item
Part number
Description
1-16
BG00407449
H3SU Core Barrel Assembly 1.5 m (5ft)
1-16
BG00408701
H3SU Core Barrel Assembly 3.0 m (10ft)
1-10
BG00407345
H3SU Inner Tube Assembly 1.5 m (5ft)
1-10
BG00408704
H3SU Inner Tube Assembly 3.0 m (10ft)
1
BF00008308
HSU/H3SU Head Assembly
H3SU Inner Tube Components 1
2 11 3
4
12
13
Item
Part number
Description
1
BF00008308
Head assembly
Qty 1
2
BA00000225
O ring
1
3
BA00000224
Piston
1
4
BF00006312
Split tube 1.5m (5ft) TRSS Sandvik
1
4
BF00006306
Split tube 3.0m (10ft) TRSS Sandvik
1
4
BF00006309
Split tube 6.0m (20ft) TRSS Sandvik
1
5
BA00000174
Inner tube 1.5 m (5 ft)
1
5
BA00000175
Inner tube 3.0 m (10 ft)
1
6
BA00000227
Stop ring
1
7
BA00000228
Core lifter - fluted
1
8
BA00000226
Core lifter case
1
9
BA00000385
Pump-out adapter
1
10
BA00000386
Piston plug
1
HSU/H3SU Outer Tube Components 5
14
9 10
Item
Part number
Description
11
BA00000208
Locking coupling - full hole
Qty 1
12
BF00008462
Adapter coupling
1
13
BA00000182
Landing ring
1
14
BA00000199
Outer tube 1.5 m (5 ft)
1
14
BA00000200
Outer tube 3.0 m (10 ft)
1
15
BA00000205
Inner tube stabilizer
1
16
BA00000204
Thread protector
1
Options to Standard Configuration
6
15
7 16 8
Item
Part number
Description
7
BF00004986
Core lifter - smooth
7
BF00005064
Core lifter - slotted
8
BF00008376
Basket core retainer H3
11
BB00000067
Locking coupling - full hole, tanged, H
11
BB00000068
Locking coupling - full hole, HT
11
BB00000069
Locking coupling - full hole, tanged HT
11
BF00003472
Locking coupling - full hole, HHD
11
BF00005229
Locking coupling - full hole, tanged HHD
14
BF00004540
Outer Tube 1.5 m (5 ft) - Chrome plated
14
BF00004541
Outer Tube 3.0 m (10 ft) - Chrome plated
14
BF00002335
Outer Tube 1.5 m (5 ft) - Full hole
14
BF00002332
Outer Tube 3.0 m (10 ft) - Full hole
14
BF00005306
Outer Tube 1.5 m (5 ft) - Chrome plated full hole
14
BF00005285
Outer Tube 3.0 m (10 ft) - Chrome plated full hole
Extended 6m H3SU Core Barrel Components
Note: To convert your current system to the Sandvik HSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool 1 x Adaptor coupling HSU
Item
Part number
Description
14
BA00000200
Outer tube 3.0 m (10 ft)
1
15
BA00000205
Inner tube stabilizer
1
5
BA00000175
Inner tube H/H3 3.0 m (10 ft)
1
-
BB00000070
Inner Tube Coupling H/H3
1
4
BF00006309
Split Tube H3 6.0 m (20ft) TRSS
1
-
BB00000244
Piston Extender H/H3
1
72 Sandvik Mining Exploration
Qty
HSU/H3SU Head Assembly Item
Part number
Description
1-40
BF00008308
Head Assembly HSU/H3SU
Qty 1
HSU/H3SU Head Assembly Components Item
Part number
Description
Qty
1
BF00007129
Latch Body
1
2
BF00007627
Latch HSU
2
3
BF00008471
Spring Pin FRP 4x50
2
4
BF00001145
Spring Pin FRP 3x26
2
5
BF00001110
O-Ring
1
6
BF00008320
Stop Ring
1
7
BF00008354
Landing Shoulder HSU
1
7
8
BF00007089
iQ Valve (Release Valve)
1
BF00001096
Socket Set Screw M6x10
1
10
8 9
9 10
BF00007742
Pin 5x55
1
12
11
11
BF00008464
Spring
1
12
BF00007741
Release Tube
1
13
BF00007097
Shaft
1
14
BF00008099
Valve Body
1
15
BF00008100
Nut
1
16
BA00000181
Shut Off Valve - hard
2
19 22
17
BA00000171
Washer
1
18
BF00008342
Spacer Washer HSU
1
23
19
BF00001126
Thrust Bearing
1
35
1 2
40
3 4 5 6
37
15 38
13 14 16 18
17
20 21 24 25 27 36
20
BF00001165
Ball Bearing 6204
1
26 28
21
BF00001101
Washer BRB 21.0 fzb
1
22
BF00007137
Upper Bearing Housing
1
29
23
BF00001185
Compression Spring
1
24
BF00000103
Bushing
1
25
BF00001125
Ball Bearing 6202
1
26
BF00001100
Washer BRB 15.0 fzb
1
27
BF00001094
Nut Loc-King
1
28
BF00008327
Lower Bearing Housing
1
29
BF00001143
Grease Fitting 1/8"
1
30
BF00007636
Nut
1
31
BF00001159
Pin
1
32
BA00000132
Ball
1
33
BA00000155
Check valve body
1
34
BF00007635
Inner Tube Connection HSU
1
35
BF00008311
Spacer Tube HSU
1
36
BF00008312
Spacer Tube HSU
1
37
BF00008997
LS Spacer HSU
1
38
BF00008340
Stabilizing Tube
1
39
BF00008344
Spring Pin FRP 10x65
1
40
BF00001080
O-Ring
1
39
30 31
34
32 33
Options to Standard Configuration Item
Part number
Description
16
BA00000180
Shut Off Valve - soft
Qty 2
-
BF000008513
Seal ring
1
Note: To convert your current system to the Sandvik HSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool 1 x Adaptor coupling HSU
73 Sandvik Mining Exploration
H2SU Wireline Core Barrels
1
6
7
Item
Part number
Description
1-11
BG00407267
H2SU Core Barrel Assembly 1.5 m (5ft)
1-11
BF00008369
H2SU Core Barrel Assembly 3.0 m (10ft)
1-5
BG00407273
H2SU Inner Tube Assembly 1.5 m (5ft)
1-5
BF00008370
H2SU Inner Tube Assembly 3.0 m (10ft)
1
BF00008366
H2SU Head Assembly
H2SU Inner Tube Components Item
Part number
Description
1
BF00008366
Head Assembly HSU
Qty 1
2
BG00401549
Inner tube H2SU 1.5 m (5ft)
1
2
BF00008413
Inner tube H2SU 3.0 m (10ft)
1
3
BF00008466
Stop ring H2
1
4
BF00008411
Core lifter H2
1
5
BF00008412
Core lifter case H2
1
-
BB00001076
Inner tube wrench (full-grip)
2
H2SU Outer Tube Components 8
9 2
3
10
4 11 5
Item
Part number
Description
6
BA00000208
Locking coupling H/H2/H3 - full hole
Qty 1
7
BF00008462
Adaptor coupling HSU
1
8
BF00008408
Landing ring H2SU
1
9
BA00000199
Outer tube H/H2/H3 1.5 m (5ft)
1
9
BA00000200
Outer tube H/H2/H3 3.0 m (10ft)
1
10
BF00008673
Inner tube stabilizer H2SU
1
11
BA00000204
Thread protector H/H2/H3
1
-
BB00000803
Outer tube wrench
2
Options to Standard Configuration Item
Part number
Description
6
BB00000067
Locking coupling - full hole, tanged, H
6
BB00000068
Locking coupling - full hole, HT
6
BB00000069
Locking coupling - full hole, tanged, HT
6
BF00003472
Locking coupling - full hole, HHD
6
BF00005229
Locking coupling - full hole, tanged HHD
9
BF00004540
Outer Tube 1.5 m (5 ft) - Chrome plated
9
BF00004541
Outer Tube 3.0 m (10 ft) - Chrome plated
9
BF00002335
Outer Tube 1.5 m (5 ft) - Full hole
9
BF00002332
Outer Tube 3.0 m (10 ft) - Full hole
9
BF00005306
Outer Tube 1.5 m (5 ft) - Chrome plated full hole
9
BF00005285
Outer Tube 3.0 m (10 ft) - Chrome plated full hole
9
BF00002334
Outer tube 1.5 m (5 ft) - full hole
9
BF00002331
Outer tube 3.0 m (10 ft) - full hole
9
BF00005283
Outer tube 3.0 m (10 ft) - chrome plated full hole
Note: To convert your current system to the Sandvik HSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool 1 x Adaptor coupling HSU
74
Sandvik Mining Exploration
H2SU Head Assembly Item
Part number
Description
1-40
BF00008366
Head Assembly H2SU
Qty 1
H2SU Head Assembly Components Item
Part number
Description
Qty
1
BF00007129
Latch Body
1
2
BF00007627
Latch HSU
2
3
BF00008471
Spring Pin
2
4
BF00001145
Spring Pin FRP 3x26
2
5
BF00001110
O-Ring
1
6
BF00008320
Stop Ring
1
7
BF00008365
Landing Shoulder H2SU
1
7
8
BF00007089
iQ Valve (Release Valve)
1
BF00001096
Socket Set Screw M6x10
1
10
8 9
9 10
BF00007742
Pin 5x55
1
12
11
11
BF00008464
Spring
1
12
BF00007741
Release Tube
1
13
BF00007097
Shaft
1
14
BF00008099
Valve Body
1
15
BF00008100
Nut
1
16
BA00000181
Shut Off Valve - hard
2
19 22
17
BA00000171
Washer
1
18
BF00008342
Spacer Washer HSU
1
23
19
BF00001126
Thrust Bearing
1
35
1 2
40
3 4 5 6
37
15 38
13 14 16 18
17
20 21 24 25 27 36
20
BF00001165
Ball Bearing 6204
1
26 28
21
BF00001101
Washer BRB 21.0 fzb
1
22
BF00007137
Upper Bearing Housing
1
29
23
BF00001185
Compression Spring
1
24
BF00000103
Bushing
1
25
BF00001125
Ball Bearing 6202
1
26
BF00001100
Washer BRB 15.0 fzb
1
27
BF00001094
Nut Loc-King
1
28
BF00008327
Lower Bearing Housing
1
29
BF00001143
Grease Fitting 1/8"
1
30
BF00007636
Nut
1
31
BF00001159
Pin
1
32
BA00000132
Ball
1
33
BA00000155
Check valve body
1
34
BF00008416
Inner Tube Connection H2SU
1
35
BF00008311
Spacer Tube HSU
1
36
BF00008312
Spacer Tube HSU
1
37
BF00008997
LS Spacer HSU
1
38
BF00008340
Stabilizing Tube
1
39
BF00008344
Spring Pin FRP 10x65
1
40
BF00001080
O-Ring
1
39
30 31
34
32 33
Options to Standard Configuration Item
Part number
Description
Qty
16
BA00000180
Shut Off Valve - soft
2
-
BF000008513
Seal ring
1
Note: To convert your current system to the Sandvik HSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool 1 x Adaptor coupling HSU
75 Sandvik Mining exploration
HSU Wireline Core Barrel Consumables Kit 1 11 2 12 3
13 4
5
6
Item
Part number
Description
Qty
1-15
BG00551282
Consumables Kit
-
1
BF00001110
O-ring
2
2
BF00007627
Latch
4
3
BF00008354
Landing shoulder
2
4
BA00000181
Shut-off valve - hard
4
5
BF00001126
Thrust bearing
2
6
BF00001165
Ball bearing 6204
2
7
BF00001125
Ball Bearing 6202
2
8
BF00001094
Nut Loc-King
1
9
BF00001143
Grease Fitting 1/8"
2
10
BA00000132
Ball
1
11
BF00008320
Stop ring
5
12
BA00000186
Core lifter
20
13
BA00000188
Core lifter case
5
14
BA00000182
Landing ring
2
15
BA00000205
Inner tube stabilizer
4
14
H2SU Wireline Core Barrel Consumables Kit 7
8
15
9 10
Item
Part number
Description
Qty
1-15
BG00551284
Consumables Kit
-
1
BF00001110
O-ring
2
2
BF00007627
Latch
4
3
BF00008365
Landing shoulder
2
4
BA00000181
Shut-off valve - hard
4
5
BF00001126
Thrust bearing
2
6
BF00001165
Ball bearing 6204
2
7
BF00001125
Ball Bearing 6202
2
8
BF00001094
Nut Loc-King
1
9
BF00001143
Grease Fitting 1/8"
2
10
BA00000132
Ball
1
11
BF00008466
Stop ring
5
12
BF00008411
Core lifter
20
13
BF00008412
Core lifter case
5
14
BF00008408
Landing ring
2
15
BF00008473
Inner tube stabilizer
4
H3SU Wireline Core Barrel Consumables Kit
Note: To convert your current system to the Sandvik HSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool 1 x Adaptor coupling HSU
Item
Part number
Description
1-15
BG00551285
Consumables Kit
-
1
BF00001110
O-ring
2
2
BF00007627
Latch
4
3
BF00008354
Landing shoulder
2
4
BA00000181
Shut-off valve - hard
4
5
BF00001126
Thrust bearing
2
6
BF00001165
Ball bearing 6204
2
7
BF00001125
Ball Bearing 6202
2
8
BF00001094
Nut Loc-King
1
9
BF00001143
Grease Fitting 1/8"
2
10
BA00000132
Ball
1
11
BA00000227
Stop ring
5
12
BA00000228
Core lifter
20
13
BA00000226
Core lifter case
5
14
BA00000182
Landing ring
2
15
BA00000205
Inner tube stabilizer
4
76 Sandvik Mining Exploration
Qty
1
Part number
Description
1-19
BG00512214
Overshot Assembly HSU, Pump-In
1
BG00482740
Wire Clamp
1
2
BG00489395
Set Screw
3
3
BG00488270
Bearing Shaft
1
4
BF00001182
Shear Pin
1
7
5
BG00486947
Bearing Housing
1
8
6
BF00005202
Grease nippel
1
7
300-027-257
Pin
1
8
BF00008200
Steel ball
2
9
BF00008243
Spring
1
10
BG00486949
Sleeve
1
11
BF00007769
Seal ring
2
12
BF00007765
Guide
1
13
BF00006565
Valve housing
1
14
BF00006564
Seal Housing
1
15
BA00000131
Landing Indicator Bushing
1
14
16
BA00000132
Stainless Steel Ball 22 mm
1
15
17
BF00001146
Spring Pin
1
18
BF00000124
Lifting Tip
1
19
BG00487308
Spring guide
1
2
3 4 5 6 19 9
10
11
Pump-In HSU Overshot Item
12 13
16 17
18
77 Sandvik Mining Exploration
Qty
Free Falling HSU Overshot
1 2 3 4 5 6
Item
Part number
Description
1-15
BF00008472
Overshot Assembly HSU, Free Falling
1
BF00000237
Wire Clamp
1
2
BF00001194
Set Screw
3
3
BF00000238
Bearing Shaft
1
4
BF00001182
Shear Pin
1
5
BF00000231
Bearing Housing
1
21
6
BF00001153
Spring Pin FRP 8x36
1
22
7
BF00008392
Wire Weight
1
8
BF00000372
Screw
3
9
BF00007761
Wheel
3
10
BF00001153
Spring Pin
1
11
BF00008559
Detent plunger
1
12
BF00001191
Compression Spring
1
13
BF00007371
Logic Tip Assembly
1
14
BG00502961
Sleeve
1
15
BG00507346
Screw
2
16 19 17 18 20
19 21
7
23
9
24 25
Qty
26
Logic Tip Assembly
9
31 9 8
30 27
10 11 12
29 28
Item
Part number
Description
Qty
16-26
BF00007371
Logic Tip Assembly
1
16
BF00008384
Lower Link
1
17
BF00001146
Spring Pin
1
18
BF00007197
Inner Shaft
1
19
BF00008200
Steel Ball
2
20
BF00008243
Detent Spring
1
21
BF00007292
Screw M6
2
22
BF00007229
Outer Tube
1
23
BF00007498
Compression Spring
1
24
BF00007291
Screw (Logic gate)
1
25
BF00007147
Lifting Tip
1
26
BF00007128
Logic Sleeve
1
Wire Weight Extension Assembly Option
13
14 15
29 28
Item
Part number
Description
27-31
BG00526463
Wire Weight Extension Assembly
27
BF00008392
Wire Weight
1
28
BF00000372
Screw
3
29
BF00007761
Wheel
3
30
BF00001153
Spring Pin
1
31
BG00466008
Wire Weight Adapter
1
29
78 Sandvik Mining Exploration
Qty
Seal Sub-Assembly HSU 4.4 Wire Item
Part number
Description
1-3
BF00008393
Seal Assembly 4.4 Wire
Qty 1
1
BF00000194
Screw WL46/56/66/76/103/NSU 4.4
1
2
BF00000097
Seal WL46/56/66/76/103/NSU 4.4 Wire
1
3
BF00000191
Spacer WL46/56/66/76/103/NSU 4.4
1
Seal Assembly HSU 4.8 Wire Item
Part number
Description
Qty
1-3
BF00008394
Seal Assembly 4.8 Wire N
1
1
BF00000195
Screw WL46/56/66/76/103/NSU 4.8
1
2
BF00000098
Seal WL46/56/66/76/103/NSU 4.8 GBR
1
3
BF00000192
Spacer WL46/56/66/76/103/NSU 4.8
1
Seal Assembly HSU 6.0 Wire
1
2 3 4
10
5 6 7 8 9
11
Item
Part number
Description
1-3
BF00008395
Seal Assembly 6.0 Wire N
Qty 1
1
BF00000196
Screw WL46/56/66/76/103/NSU 6.0
1
2
BF00000125
Seal WL46/56/66/76/103/NSU 6.0 Wire
1
3
BF00000193
Spacer WL46/56/66/76/103/NSU 6.0
1
Stuffing Box H Sub-Assembly HSU Item
Part number
Description
4-11
BG00409909
Stuffing Box H Sub-Assembly HSU
Qty 1
4
BF00006569
Seal Housing NSU/HSU
1
5
BF00001111
O Ring 44.2x3.0
1
6
BF00006701
Spring Pin
2
7
BF00006574
Holder NSU/HSU
1
8
BF00001170
Grease Fitting
1
9
BF00006576
O Ring 49.5x3
1
10
BF00007685
Connector, Stuffing Box H
1
11
BB00000169
Drill Rod H L=600
1
Stuffing Box HT Sub-Assembly HSU Item
Part number
Description
Qty
4-11
BG00409965
Stuffing Box HT Sub-Assembly HSU
1
4
BF00006569
Seal Housing NSU/HSU
1
5
BF00001111
O Ring 44.2x3.0
1
6
BF00006701
Spring Pin
2
7
BF00006574
Holder NSU/HSU
1
8
BF00001170
Grease Fitting
1
9
BF00006576
O Ring 49.5x3
1
10
BF00007686
Connector, Stuffing Box HT
1
11
BB00000173
Drill Rod HT L=600
1
Stuffing Box HHD Sub-Assembly HSU Item
Part number
Description
4-11
BG00409995
Stuffing Box HHD Sub-Assembly HSU
Qty 1
4
BF00006569
Seal Housing NSU/HSU
1
5
BF00001111
O Ring 44.2x3.0
1
6
BF00006701
Spring Pin
2
7
BF00006574
Holder NSU/HSU
1
8
BF00001170
Grease Fitting
1
9
BF00006576
O Ring 49.5x3
1
10
BF00007697
Connector, Stuffing Box HHD
1
11
BF00004278
Drill Rod HHD L=600
1
Note: To convert your current system to the Sandvik HSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool 1 x Adaptor coupling HSU
79 Sandvik Mining Exploration
Wireline Survey Tool - HSU
12 10 9
11
8 7 6
Item
Part number
Description
1-12
BG00523136
Survey Tool HSU Assembly
Qty 1
1
BG00481684
Thread Adaptor E Rod Pin
1
2
BF00008768
Spring Pin
1
3
BF00008719
Spacer
1
4
BG00523139
Bit Stopper H/H2/H3 (Nylon)
1
5
BF00001185
Compression Spring
1
6
BG00485260
Latch Body
1
7
BG00485614
Sleeve
1
8
BG00486584
Rivet
1
9
BF00001145
Pin
2
10
BF00001150
Pin
2
11
BF00001110
O-ring
1
12
BF00007125
Latch
2
5
Wireline Survey Tool - Options 3
Item
Part number
Description
13
BG00528387
Landing Ring Stopper H (Steel)
Qty 1
14
BG00528396
Landing Ring Stopper H2 (Steel)
1
2 1
Note: To convert your current system to the Sandvik HSU Surface or Underground system please order2 x Head assemblies 1 x Free fall overshot for surface drilling 1 x Pump in overshot for up hole drilling 1 x Survey tool 1 x Adaptor coupling HSU
13
14
MINING.SANDVIK.COM
80 Sandvik Mining Exploration
© Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
4
EXPLORATION CORING TOOLS RP621 CASING “W” AND “WT” THREADS
Sandvik’s high quality standards and a level of excellence in manufacturing has enabled us to provide casing with optimal performance through superior: • Material specification • Machining Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
81 Sandvik Mining Exploration
METRIC LENGTH CASINGS Part no
Description
Length ID
OD
Weight
m
mm
in
mm
in
kg
lb 14.09
“W” THREAD BB00000176
Casing, BW
0.6
60.3
2.38
69.9
2.75
6.39
BB00000177
Casing, BW
1.5
60.3
2.38
69.9
2.75
15.98 35.23
BB00000178
Casing, BW
3.0
60.3
2.38
69.9
2.75
31.97 70.48
BB00000125
Casing, NW
0.6
76.2
3.0
88.9
3.50
7.81
BB00000126
Casing, NW
1.5
76.2
3.0
88.9
3.50
19.52 43.03
BB00000127
Casing, NW
3.0
76.2
3.0
88.9
3.50
39.04 86.07
BB00000570
Casing, HW
0.6
101.6 4.00
114.3 4.50
13.73 30.27
BB00000571
Casing, HW
1.5
101.6 4.00
114.3 4.50
27.46 60.54
BB00000124
Casing, HW
3.0
101.6 4.00
114.3 4.50
53.34 117.59
BB00000179
Casing, HWT 0.6
101.6 4.00
114.3 4.50
13.73 30.27
BB00000180
Casing, HWT 1.5
101.6 4.00
114.3 4.50
27.46 60.54
BB00000181
Casing, HWT 3.0
101.6 4.00
114.3 4.50
53.34 117.59
BB00000182
Casing, PWT
0.6
127.0 5.00
139.7 5.50
16.91 37.28
BB00000183
Casing, PWT
1.5
127.0 5.00
139.7 5.50
33.82 74.56
BB00000184
Casing, PWT
3.0
127.0 5.00
139.7 5.50
65.69 144.82
17.22
“WT” THREAD
IMPERIAL LENGTH CASINGS Part no
Description
Length ID
OD
Weight
ft
mm
in
mm
in
kg
lb
5.21
60.3
2.38
69.9
2.75
15.71 34.63
“W” THREAD BF00007689
Field proven casing in operation with the DE710 surface core drill
Casing, BW 5 ft
BF00007693
Casing, BW 10 ft
10.21
60.3
2.38
69.9
2.75
31.34 69.09
BF00007690
Casing, NW 5 ft
5.23
76.2
3.0
88.9
3.50
19.45 42.88
3.0
88.9
3.50
BF00007694
Casing, NW 10 ft
10.23
76.2
BF00007691
Casing, HW 5 ft
5.25
101.6 4.00
114.3 4.50
25.48 56.17
38.8
85.54
BF00007695
Casing, HW 10 ft
10.25
101.6 4.00
114.3 4.50
50.75 111.88
BF00007692
Casing, HWT 5 ft
5.21
BF00007696
Casing, HWT 10 ft 10.21
“WT” THREAD
• Quality alloy steel is manufatured to Sandvik specifications and supplied by qualified vendors. • All materials are tested and benchmarked in Sandvik Materials Technology’s state-ofthe-art materials laboratory. • Machining expertise provided by a team of seasoned professionals. • Outside diameter and pin end of casing are coated in environmentally friendly rust inhibitor. • Box ends are coated with a high quality thread lubricant.
114.3 4.50
25.45 56.11
114.3 4.50
50.75 111.88
Bundle Detail
# of Length Rods m ft
Width
Height
Weight
mm in
mm
kg
ib
Qty per container
Casing, BW
19
1.58
5.18
356 14.02
Casing, BW
19
3.08
10.11 356 14.02
320 12.60 315
694
72
320 12.60 613
1351 38
Casing, NW
19
3.08
Casing, NW
19
3.15
10.11 470 18.50
410 16.14 389
858
10.33 470 18.50
410 16.14 753
1,660 32
Casing, HW
7
1.58
5.18
356 14.02
320 12.60 190
419
108
Casing, HW
in
60
7
3.08
10.11 356 14.02
320 12.60 370
816
52
Casing, HWT 7
1.58
5.18
356 14.02
320 12.60 190
419
100
Casing, HWT 7
3.08
10.11 356 14.02
320 12.60 370
816
52
Casing, PWT 7
1.58
5.18
432 17.01
391 15.39 227
501
90
Casing, PWT 7
3.08
10.11 432 17.01
391 15.39 452
997
35
NOTE: Bundles per container is based on standard 40 ft shipping container. Details for 0.6 m casing bundles are available on request.
• Finished casing are bundled to protect the precision machined threads from the elements and potential impact damage, therefore sold in BUNDLE QUANTITIES ONLY
RP621 SERIES CASINGS
101.6 4.00 101.6 4.00
82 Sandvik Mining Exploration
CORING AFTERMARKET RP622 SERIES RODS STANDARD WIRELINE DRILL RODS The Sandvik RP620 series of drill rod features thread profiles in their truest form for the best fit possible - instead of accepting common industry practices used on the finished machined threads, Sandvik has introduced a proprietary thread compound to address the issue of galling. Sandvik’s high quality standards and level of excellence in manufacturing has enabled us to provide wireline drill rods with optimal performance through superior: • Material specification • Heat treatment • Machining Contact your Sandvik representative today. Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers !
83 Sandvik Mining Exploration
The Sandvik RP622 series of drill rod features the industry standard modified ACME thread on the box and pin ends with the appropriate stand-off gap to ensure a tight seal. METRIC LENGTH RODS
H = 1500 m (5000 ft) depth
N = 2000 m (6500 ft) depth
B = 1500 m (5000 ft) depth
Part No
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions. These results can be reasonably expected but no guarantee is implied. For more specification see the wireline drill rod specification sheet.
Description
Length
ID
OD
Weight
mm
in
mm
in
kg
lb
BB00000167
Drill Rod, B
0.6 m
46.1
1.81
55.6
2.19
3.60
7.94
BF00004027
Drill Rod, B
1.0 m
46.1
1.81
55.6
2.19
6.00
13.20
BB00000035
Drill Rod, B
1.5 m
46.1
1.81
55.6
2.19
9.00
19.84
BB00000037
Drill Rod, B
3.0 m
46.1
1.81
55.6
2.19
18.00
39.68
BB00000168
Drill Rod, N
0.6 m
60.3
2.37
69.9
2.75
4.60
10.19
BF00008751
Drill Rod, N
1.0 m
60.3
2.37
69.9
2.75
7.80
17.20
BB00000038
Drill Rod, N
1.5 m
60.3
2.37
69.9
2.75
11.60
25.46
BB00000039
Drill Rod, N
3.0 m
60.3
2.37
69.9
2.75
23.10
50.93
BB00000169
Drill Rod, H
0.6 m
77.8
3.06
88.9
3.50
6.80
15.08
BF00008750
Drill Rod, H
1.0 m
77.8
3.06
88.9
3.50
11.40
25.10
BB00000040
Drill Rod, H
1.5 m
77.8
3.06
88.9
3.50
17.10
37.70
BB00000041
Drill Rod, H
3.0 m
77.8
3.06
88.9
3.50
34.20
75.40
NOTE: 0.6 m rod lengths are available on request, contact your Sandvik representative.
IMPERIAL LENGTH RODS Part No
Sandvik’s environmentally friendly antigalling thread compound is available for purchase, contact your representative • 3.8 l container p/n BB00000241 • 20 l container p/n BB00000242
Description
Length
ID
OD
Weight
mm
in
mm
in
kg
lb
BB00000044
Drill Rod, B
5 ft
46.1
1.81
55.6
2.19
9.10
20.16
BB00000045
Drill Rod, B
10 ft
46.1
1.81
55.6
2.19
18.30
40.32
BB00000046
Drill Rod, N
5 ft
60.3
2.38
69.9
2.75
11.70
25.87
BB00000047
Drill Rod, N
10 ft
60.3
2.38
69.9
2.75
23.50
51.74
BB00000048
Drill Rod, H
5 ft
77.8
3.06
88.9
3.50
17.40
38.30
BB00000050
Drill Rod, H
10 ft
77.8
3.06
88.9
3.50
34.70
76.60
Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers ! ROD BUNDLE DETAIL Bundle B
N Finished rods are bundled to protect the precision machined threads from the elements and potential impact damage, therefore sold in BUNDLE QUANTITIES ONLY
H
# of Rods
Length m
ft
Width mm
in
Height mm
in
Weight kg
lb
Qty per container
19
1.08
3.54
290
11.42
254
10.00
124
273
126
19
1.58
5.18
290
11.42
254
10.00
181
399
126
19
3.08
10.11
290
11.42
254
10.00
355
783
63
19
1.08
3.54
356
14.02
320
12.60
157
346
100
19
1.58
5.18
356
14.02
320
12.60
229
505
100
19
3.08
10.11
356
14.02
320
12.60
450
992
52
19
1.08
3.54
470
18.50
410
16.14
235
518
60
19
1.58
5.18
470
18.50
410
16.14
343
756
60
19
3.08
10.11
470
18.50
410
16.14
674
1,486
35
NOTE: Bundles per container is based on standard 40 ft shipping container. Details above are for metric length rods - 0.6 m or imperial length rod bundle details are available on request. Bundle weights are a guide for shipping purposes. Not to be used for calculation in drilling operations. Please refer to drill rod specification. RP600 SERIES WIRELINE DRILL RODS
84 Sandvik Mining Exploration
The Sandvik RP622 series of drill rod features the industry standard modified ACME thread on the box and pin ends with the appropriate stand-off gap to ensure a tight seal. SPECIFICATION
DRILL RODS B
N
H
METRIC
IMPERIAL
METRIC
IMPERIAL
METRIC
IMPERIAL
Outer Diameter OD
55.60mm
2.19 in
69.90 mm
3.75 in
88.90 mm
3.50 in
Inner Diameter ID (box shoulder)
46.00mm
1.81 in
60.30 mm
2.37 in
77.80 mm
3.06 in
Inner Diameter ID (midbody)
46.00mm
1.81 in
60.30 mm
2.37 in
77.80 mm
3.06 in
Wall Thickness
4.90mm
0.19 in
4.80 mm
0.19 in
5.55 mm
0.22 in
Pin End Length
44.5mm
1.8 in
44.5 mm
1.8 in
44.5 mm
1.8 in
Thread Pitch
8.50mm
0.33 in
8.50 mm
0.33 in
8.50 mm
0.33 in
Weight
5.96 kg/m
4.00 lb/ft
7.71 kg/m
5.18 lb/ft
11.41 kg/m
7.67 lb/ft
Rod Content Volume
1.67 l/m
0.44 gpm
2.86 l/m
0.75 gpm
4.75 l/m
1.26 gpm
Hole Volume
2.83 l/m
0.75 gpm
4.51 l/m
1.19 gpm
7.25 l/m
1.92 gpm
Rod/Hole Annulus Volume
0.40 l/m
0.1 gpm
0.68 l/m
0.18 gpm
1.05 l/m
0.28 gpm
Recommended Max Depth
1,500 m
4,921 ft
2,000 m
6,562 ft
1,500 m
4,921 ft
Recommended Max Pullback
112 kN
25,179 lbf
140 kN
31,550 lbf
215 kN
48,255 lbf
Recommended Max Drilling Torque
759 Nm
627 lbf ft
1,257 Nm
927 lbf ft
2,503 Nm
1,846 lbf ft
Recommended Min Make-Up Torque
400 Nm
295 lbf ft
600 Nm
443 lbf ft
1,000 Nm
738 lbf ft
Recommended Min Make-Up Torque, over 1,000m
500 Nm
369 lbf ft
1,000 Nm
738 lbf ft
1,200 Nm
885 lbf ft
Recommended Min Make-Up Torque, over 2,000m
--
--
--
--
--
--
Min Yield Strength (joint)
1,070 MPa
155,191 psi
1,070 MPa
155,191 psi
1,070 MPa
155,191 psi
Min Tensile Strength (joint)
1,200 MPa
174,046 psi
1,200 MPa
174,046 psi
1,200 MPa
174,046 psi
Displacement Volume
0.76 l/m
0.20 gpm
0.98 l/m
0.26 gpm
1.45 l/m
0.38 gpm
Collapse Pressure
114 MPa
16,840 psi
81 MPa
11,782 psi
69 MPa
9,995 psi
Proper stand-off gap is required to allow the joint to be locked during make-up to prevent leaks and spin-off
20 cm quench and temper heat treatment of box and pin ends for increased tensile and yeild strength
SANDVIK RP622 WIRELINE THREAD PROFILE
Highly engineered threads providing maximum depth capacity and pullback.
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions. These results can be reasonably expected but no guarantee is implied. Sandvik wireline drill rods require the use of Sandvik proprietary thread compound on initial make-up. * Box and pin ends have not been quench and tempered. **Manufactured from variable wall material, measurements are only representative of rod box/pin ends.
85 Sandvik Mining Exploration
RP600 SERIES WIRELINE DRILL RODS
CORING AFTERMARKET RP623 SERIES RODS STANDARD T WIRELINE DRILL ROD The Sandvik RP620 series of drill rod features thread profiles in their truest form for the best fit possible - instead of accepting common industry practices used on the finished machined threads, Sandvik has introduced a proprietary thread compound to address the issue of galling. Sandvik’s high quality standards and level of excellence in manufacturing has enabled us to provide wireline drill rods with optimal performance through superior: • Material specification • Heat treatment • Machining Contact your Sandvik representative today. Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers !
86 Sandvik Mining Exploration
The Sandvik RP623 series of drill rod features a robust, modified square profile thread on the box and pin ends commonly referred to in the industry as “T”. METRIC LENGTH RODS
HT = 1750 m (5700 ft) depth
NT = 2000 m (6500 ft) depth
BT = 1800 m (5900 ft) depth
Part No
Description
Length
ID
OD
Weight
mm
in
mm
in
kg
lb
BB00000123
Drill Rod, BT
1,5 m
46,1
1.81
55,6
2.19
9,00
19.84
BB00000052
Drill Rod, BT
3,0 m
46,1
1.81
55,6
2.19
18,00
39.68
BB00000053
Drill Rod, NT
1,5 m
60,3
2.38
69,9
2.75
11,60
25.46
BB00000054
Drill Rod, NT
3,0 m
60,3
2.38
69,9
2.75
23,10
50.93
BB00000055
Drill Rod, HT
1,5 m
77,8
3.06
88,9
3.50
17,10
37.70
BB00000056
Drill Rod, HT
3,0 m
77,8
3.06
88,9
3.50
34,20
75.40
NOTE: 0.6 m rod lengths are available on request, contact your Sandvik representative.
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions. These results can be reasonably expected but no guarantee is implied. For more specification see the wireline drill rod specification sheet.
IMPERIAL LENGTH RODS
Sandvik’s environmentally friendly antigalling thread compound is available for purchase, contact your representative • 3.8 l container p/n BB00000241 • 20 l container p/n BB00000242
Part No
Description
Length
mm
in
mm
in
kg
lb
BB00000057
Drill Rod, BT
5 ft
46.1
1.81
55.6
2.19
9.10
20.16
BB00000058
Drill Rod, BT
10 ft
46.1
1.81
55.6
2.19
18.30
40.32
BB00000059
Drill Rod, NT
5 ft
60.3
2.38
69.9
2.75
11.70
25.87
BB00000060
Drill Rod, NT
10 ft
60.3
2.38
69.9
2.75
23.50
51.74
BB00000061
Drill Rod, HT
5 ft
77.8
3.06
88.9
3.50
17.40
38.30
BB00000062
Drill Rod, HT
10 ft
77.8
3.06
88.9
3.50
34.70
76.60
ID
OD
Weight
Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers ! ROD BUNDLE DETAIL Bundle BT NT
Finished rods are bundled to protect the precision machined threads from the elements and potential impact damage, therefore sold in BUNDLE QUANTITIES ONLY
HT
Length
Width
Height
Weight
# of Rods
m
ft
mm
in
mm
in
kg
lb
Qty per container
19
1.58
5.18
290
11.42
254
10.00
181
399
126
19
3.08
10.11
290
11.42
254
10.00
355
783
63
19
1.58
5.18
356
14.02
320
12.60
229
505
100
19
3.08
10.11
356
14.02
320
12.60
450
992
52
19
1.58
5.18
470
18.50
410
16.14
343
756
60
19
3.08
10.11
470
18.50
410
16.14
674
1,486
35
NOTE: Bundles per container is based on standard 40 ft shipping container. Details above are for metric length rods - 0.6 m or imperial length rod bundle details are available on request. Bundle weights are a guide for shipping purposes. Not to be used for calculation in drilling operations. Please refer to drill rod specification.
RP600 SERIES WIRELINE DRILL RODS
87 Sandvik Mining Exploration
The Sandvik RP623 series of drill rod features a robust, modified square profile thread on the box and pin ends commonly referred to in the industry as “T”. SPECIFICATION
DRILL RODS BT
NT
HT
METRIC
IMPERIAL
METRIC
IMPERIAL
METRIC
IMPERIAL
Outer Diameter OD
55.60 mm
2.19 in
69.90 mm
3.75 in
88.90 mm
3.50 in
Inner Diameter ID (box shoulder)
46.00 mm
1.81 in
60.30 mm
2.37 in
77.80 mm
3.06 in
Inner Diameter ID (midbody)
46.00 mm
1.81 in
60.30 mm
2.37 in
77.80 mm
3.06 in
Wall Thickness
4.95 mm
0.20 in
4.80 mm
0.19 in
5.55 mm
0.22 in
Pin End Length
50.7 mm
2.0 in
55.4 mm
2.2 in
55.8 mm
2.2 in
Thread Pitch
10.20 mm
0.40 in
12.70 mm
0.50 in
12.70 mm
0.50 in
Weight
6.01 kg/m
4.04 lb/ft
7.71 kg/m
5.18 lb/ft
11.41 kg/m
7.67 lb/ft
Rod Content Volume
1.66 l/m
0.44 gpm
2.86 l/m
0.75 gpm
4.75 l/m
1.26 gpm
Hole Volume
2.83 l/m
0.75 gpm
4.51 l/m
1.19 gpm
7.25 l/m
1.92 gpm
Rod/Hole Annulus Volume
0.40 l/m
0.1 gpm
0.68 l/m
0.18 gpm
1.05 l/m
0.28 gpm
Recommended Max Depth
1,800 m
5,906 ft
2,200 m
7,281 ft
1,750 m
5,741 ft
Recommended Max Pullback
125 kN
28,077 lbf
151 kN
34,035 lbf
238 kN
53,549 lbf
Recommended Max Drilling Torque
849 Nm
627 lbf ft
1,365 Nm
1,007 lbf ft
2,797 Nm
2,063 lbf ft
Recommended Min Make-Up Torque
400 Nm
295 lbf ft
600 Nm
443 lbf ft
1,000 Nm
738 lbf ft
Recommended Min Make-Up Torque, over 1,000m
500 Nm
369 lbf ft
1,000 Nm
738 lbf ft
1,200 Nm
885 lbf ft
Recommended Min Make-Up Torque, over 2,000m
--
--
--
--
--
--
Min Yield Strength (joint)
1,070 MPa
155,191 psi
1,070 MPa
155,191 psi
1,070 MPa
155,191 psi
Min Tensile Strength (joint)
1,200 MPa
174,046 psi
1,200 MPa
174,046 psi
1,200 MPa
174,04 6psi
Displacement Volume
0.76 l/m
0.20 gpm
0,98 l/m
0.26 gpm
1.45 l/m
0.38 gpm
Collapse Pressure
114 MPa
16,840 psi
81 MPa
11,782 psi
69 MPa
9,995 psi
Proper stand-off gap is required to allow the joint to be locked during make-up to prevent leaks and spin-off
20 cm quench and temper heat treatment of box and pin ends for increased tensile and yeild strength
RP623 “T” THREAD PROFILE
Highly engineered threads providing maximum depth capacity and pullback.
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions. These results can be reasonably expected but no guarantee is implied. Sandvik wireline drill rods require the use of Sandvik proprietary thread compound on initial make-up. * Box and pin ends have not been quench and tempered. **Manufactured from variable wall material, measurements are only representative of rod box/pin ends.
88 Sandvik Mining Exploration
RP600 SERIES WIRELINE DRILL RODS
CORING AFTERMARKET RP625 SERIES RODS HEAVY-DUTY WIRELINE DRILL RODS Sandvik’s RP625 heavy-duty wireline drill rods are easily identified with two grooves on the pin end and feature thread profiles in their truest form for the best fit possible - instead of accepting common industry practices used on the finished machined threads, Sandvik has introduced a proprietary thread compound to address the issue of galling. Sandvik’s high quality standards and level of excellence in manufacturing has enabled us to provide wireline drill rods with optimal performance through superior: • Material specification • Heat treatment • Machining Contact your Sandvik representative today. Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers !
89 Sandvik Mining Exploration
SHD = 1200 m (4000 ft) depth
PHD = 1500 m (5000 ft) depth
HHD = 2500 m (8000 ft) depth
NHD = 3000 m (10,000 ft) depth
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions. These results can be reasonably expected but no guarantee is implied. For more specification see the wireline drill rod specification sheet.
Sandvik RP625 rods feature an industry proven buttress thread form that has proven itself time and again as a quality thread that will meet all of your requirements for deep hole drilling applications. METRIC LENGTH RODS Part No
Description
Length
ID
OD
Weight
mm
in
mm
in
kg
lb
BF00004276
Drill Rod, NHD
0.6 m
60.3
2.37
69.9
2.75
4.60
10.19
BF00004162
Drill Rod, NHD
1.5 m
60.3
2.37
69.9
2.75
11.60
25.46
BF00002259
Drill Rod, NHD
3.0 m
60.3
2.37
69.9
2.75
23.10
50.93
BF00004278
Drill Rod, HHD
0.6 m
77.8
3.06
88.9
3.50
6.80
15.08
BF00004277
Drill Rod, HHD
1.5 m
77.8
3.06
88.9
3.50
17.10
37.70
BF00002263
Drill Rod, HHD
3.0 m
77.8
3.06
88.9
3.50
34.20
75.40
BB00000238
Drill Rod, PHD
1.5 m
101.6
4.00
114.3
4.50
25.40
55.89
BB00000239
Drill Rod, PHD
3.0 m
101.6
4.00
114.3
4.50
50.70
111.77
BB00000122
Drill Rod, SHD
1.5 m
126.6
5.00
139.7
5.50
31.40
69.11
BB00000175
Drill Rod, SHD
3.0 m
126.6
5.00
139.7
5.50
62.70
138.23
NOTE: “P” 0.6 m heat treated drill rod is available as special order only, contact your Sandvik representative. “S” wireline drill rods are manufactured with the same quality grade materials but does not have heat treated box and pin ends.
IMPERIAL LENGTH RODS Part No
Sandvik’s environmentally friendly antigalling thread compound is available for purchase, contact your representative • 3.8 l container p/n BB00000241 • 20 l container p/n BB00000242
Description
Length
ID
OD
Weight
mm
in
mm
in
kg
lb
BF00004331
Drill Rod, NHD
5 ft
60.3
2.38
69.9
2.75
11.70
25.87
BF00004332
Drill Rod, NHD
10 ft
60.3
2.38
69.9
2.75
23.50
51.74
BF00004333
Drill Rod, HHD
5 ft
77.8
3.06
88.9
3.50
17.40
38.30
BF00004334
Drill Rod, HHD
10 ft
77.8
3.06
88.9
3.50
34.70
76.60
Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers ! ROD BUNDLE DETAIL Bundle N H
Finished rods are bundled to protect the precision machined threads from the elements and potential impact damage, therefore sold in BUNDLE QUANTITIES ONLY
P S
# of Rods
Length m
ft
Width mm
in
Height mm
in
Weight kg
lb
Qty per container
19
1.58
5.18
356
14.02
320
12.60
229
505
100
19
3.08
10.11
356
14.02
320
12.60
450
992
52
19
1.58
5.18
470
18.50
410
16.14
343
756
60
19
3.08
10.11
470
18.50
410
16.14
674
1,486
35
7
1.58
5.18
356
14.02
320
12.60
190
419
104
7
3.08
10.11
356
14.02
320
12.60
370
816
52
7
1.58
5.18
432
17.01
391
15.39
227
500
60
7
3.08
10.11
432
17.01
391
15.39
452
996
35
NOTE: Bundles per container is based on standard 40 ft shipping container. Details above are for metric length rods - 0.6 m or imperial length rod bundle details are available on request. Bundle weights are a guide for shipping purposes. Not to be used for calculation in drilling operations. Please refer to drill rod specification.
RP600 SERIES WIRELINE DRILL RODS
90 Sandvik Mining Exploration
Sandvik RP625 rods feature an industry proven buttress thread form that has proven itself time and again as a quality thread that will meet all of your requirements for deep hole drilling applications. SPECIFICATION
DRILL RODS NHD
HHD
PHD
SHD
METRIC
IMPERIAL
METRIC
IMPERIAL
METRIC
IMPERIAL
METRIC
IMPERIAL
Outer Diameter OD
69.90 mm
3.75 in
88,90 mm
3.50 in
114.30 mm 4.50 in
139.70 mm
5.50 in
Inner Diameter ID (box shoulder)
60.30 mm
2.37 in
77,80 mm
3.06 in
101.60 mm 4.00 in
127.00 mm
4.50 in
Inner Diameter ID (midbody)
60.30 mm
2.37 in
77,80 mm
3.06 in
101.60 mm 4.00 in
127.00 mm
4.50 in
Wall Thickness
4.80 mm
0.19 in
5,55 mm
0.22 in
6.35 mm
0.25 in
6.35 mm
0.25 in
Pin End Length
44.5 mm
1.8 in
44,5 mm
1.8 in
62.8 mm
2.5 in
62.8 mm
2.5 in
Thread Pitch
8.50 mm
0.33 in
8,50 mm
0.33 in
10.20 mm
0.40 in
10.20 mm
0.40 in
Weight
7.71 kg/m
5.18 lb/ft
11,41 kg/m
7.67 lb/ft
16.9 kg/m
11.36 lb/ft
20.88 kg/m
14.03 lb/ft
Rod Content Volume
2.86 l/m
0.75 gpm
4,75 l/m
1.26 gpm
8.11 l/m
2.14 gpm
12.67 l/m
3.35 gpm
Hole Volume
4.51 l/m
1.19 gpm
7,25 l/m
1.92 gpm
11.80 l/m
3.12 gpm
16.74 l/m
4.42 gpm
Rod/Hole Annulus Volume
0.68 l/m
0.18 gpm
1,05 l/m
0.28 gpm
1.54 l/m
0.41 gpm
1.41 l/m
0.37 gpm
Recommended Max Depth
3,000 m
9843 ft
2500 m
8,202 ft
1,500 m
4,921 ft
900 m
2,953 ft
Recommended Max Pullback
140 kN
31,550 lbf
215 kN
48,255 lbf
352 kN
79,243 lbf
254 kN
57,124 lbf
Recommended Max Drilling Torque
1,257 Nm
927 lbf ft
2503 Nm
1,846 lbf ft
5,438 Nm
4,011 lbf ft
4,946 Nm
3,648 lbf ft
Recommended Min Make-Up Torque
600 Nm
443 lbf ft
1000 Nm
738 lbf ft
1,500 Nm
1,106 lbf ft
1,800 Nm
1,328 lbf ft
Recommended Min Make-Up Torque, over 1,000m
1,000 Nm
738 lbf ft
1400 Nm
1,003 lbf ft
1,800 Nm
1,328 lbf ft
2,100 Nm
1,549 lbf ft
Recommended Min Make-Up Torque,over 2,000m
1,400
1,400
2,000
2,000
--
--
--
--
Min Yield Strength (joint)
1,070 MPa
155,191 psi 1070 MPa
155,191 psi 1,070 MPa 155,191 psi 621 MPa
90,0691 psi
Min Tensile Strength (joint)
1,200 MPa
174,046 psi 1200 MPa
174,046 psi 1,200 MPa 174,046 psi 723 MPa
104,852 psi
Displacement Volume
0.98 L/m
0.26 gpm
1,45 l/m
0.38 gpm
2.15 l/m
0.57 gpm
2.66 l/m
0.70 gpm
Collapse Pressure
81 MPa
11,782 psi 69 MPa
9,995 psi
55 MPa
8,026 psi
35 MPa
5,133 psi
Proper stand-off gap is required to allow the joint to be locked during make-up to prevent leaks and spin-off
20 cm quench and temper heat treatment of box and pin ends for increased tensile and yeild strength
RP625 HEAVY DUTY THREAD PROFILE
Highly engineered threads providing maximum depth capacity and pullback.
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions. These results can be reasonably expected but no guarantee is implied. Sandvik wireline drill rods require the use of Sandvik proprietary thread compound on initial make-up. * Box and pin ends have not been quench and tempered. **Manufactured from variable wall material, measurements are only representative of rod box/pin ends.
91 Sandvik Mining Exploration
RP600 SERIES WIRELINE DRILL RODS
CORING AFTERMARKET RP630 SERIES RODS HEAVY-DUTY WIRELINE DRILL RODS - LIGHT WEIGHT Sandvik’s RP630 heavy-duty wireline drill rods offer you even greater depths by decreasing the overall weight of the string for less load on your drill. By using a variable wall material, this lighter weight drill rod features a thinner midbody while maintaining a robust threaded joint ensuring it can withstand the stresses of deep hole drilling. Sandvik’s high quality standards and level of excellence in manufacturing has enabled us to provide wireline drill rods with optimal performance through superior: • Material specification • Heat treatment • Machining Sandvik’s RP630 rods are easily identified with one groove on the pin end. Contact your Sandvik representative today. Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers !
92 Sandvik Mining Exploration
RP630 rods are maunfactured using variable wall material and feature an industry proven buttress thread form that has proven itself time and again as a quality thread that will meet all of your requirements for deep hole drilling applications.
HHD-LW = 3000 m (9850 ft) depth
NHD-LW = 3200 m (10,500 ft) depth
METRIC LENGTH RODS
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions. These results can be reasonably expected but no guarantee is implied. For more specification see the wireline drill rod specification sheet.
Sandvik’s environmentally friendly antigalling thread compound is available for purchase, contact your representative • 3.8 l container p/n BB00000241
Part No
Description
Length
mm
in
mm
in
kg
lb
BF00004611
Drill Rod, NHD-LW
3.0 m
60.3
2.37
69.9
2.75
20.40
44.97
BF00004613
Drill Rod, HHD-LW
3.0 m
77.8
3.06
88.9
3.50
27.00
59.52
BF00008079
Drill Rod, PHD-LW
3.0 m
101.6
4.00
114.3
4.50
36.00
79.37
Length
ID*
ID*
OD*
Weight
METRIC LENGTH RODS Part No
Description
OD*
Weight
mm
in
mm
in
kg
lb
BF00004612
Drill Rod, NHD-LW
10 ft
60.3
2.37
69.9
2.75
20.70
45.69
BF00004614
Drill Rod, HHD-LW
10 ft
77.8
3.06
88.9
3.50
27.40
60.48
*Manufactured from variable wall material, measurements are only representative of rod ends. Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers !
• 20 l container p/n BB00000242
ROD BUNDLE DETAIL Bundle
Finished rods are bundled to protect the precision machined threads from the elements and potential impact damage, therefore sold in BUNDLE QUANTITIES ONLY
Length
Width
Height
Weight
# of Rods
m
ft
mm
in
mm
in
kg
lb
Qty per container
N
19
3.08
10.11
356
14.02
320
12.60
400
882
52
H
19
3.08
10.11
470
18.50
410
16.14
537
1,184
35
P
7
3.08
10.11
356
14.02
320
12.60
370
816
52
NOTE: Bundles per container is based on standard 40 ft shipping container. Details above are for metric length rods - 0.6 m or imperial length rod bundle details are available on request. Bundle weights are a guide for shipping purposes. Not to be used for calculation in drilling operations. Please refer to drill rod specification.
RP600 SERIES WIRELINE DRILL RODS
93 Sandvik Mining Exploration
RP630 rods are maunfactured using variable wall material and feature an industry proven buttress thread form that has proven itself time and again as a quality thread that will meet all of your requirements for deep hole drilling applications. SPECIFICATION
DRILL RODS NHD-LW
Outer Diameter OD Inner Diameter ID (box shoulder)
HHD-LW
PHD-LW
METRIC
IMPERIAL
METRIC
IMPERIAL
METRIC
IMPERIAL
69.90 mm
3.75 in
88.90 mm
3.50 in
114.30 mm
4.50 in
2.37 in
77.80 mm
3.06 in
101.60 mm
4.00 in 4.18 in
60.30mm
Inner Diameter ID (midbody)
61.82 mm
2.43 in
80.86 mm
3.18 in
106.30 mm
Wall Thickness
4.80 mm
0.19 in
5.55 mm
0.22 in
6.35 mm
0.25 in
Pin End Length
44.5 mm
1.8 in
44.5 mm
1.8 in
63.3 mm
2.5 in
Thread Pitch
8.50 mm
0.33 in
8.50 mm
0.33 in
10.20 mm
0.40 in
Weight
6.80 kg/m
4.57 lb/ft
9.00 kg/m
5.18 lb/ft
12.70 kg/m
8.54 lb/ft
Rod Content Volume
2.98 l/m
0.79 gpm
5.06 l/m
1.34 gpm
8.07 l/m
2.30 gpm
Hole Volume
4.51 l/m
1.19 gpm
7.25 l/m
1.92 gpm
11.80 l/m
3.12 gpm
Rod/Hole Annulus Volume
0.68 l/m
0.18 gpm
1.05 l/m
0.28 gpm
1.05 l/m
0.28 gpm
Recommended Max Depth
3,200 m
10,499 ft
3,000 m
9,802 ft
2,000 m
6,562 ft
Recommended Max Pullback
140 kN
31,550 lbf
215 kN
48,255 lbf
352 kN
79,243 lbf
Recommended Max Drilling Torque
1,257 Nm
927 lbf ft
2,503 Nm
1,846 lbf ft
5,438 Nm
4,011lbf ft
Recommended Min Make-Up Torque
600 Nm
443 lbf ft
1,000 Nm
738 lbf ft
1,500 Nm
1,106 lbf ft
Recommended Min Make-Up Torque, over 1,000m
1,000 Nm
738 lbf ft
1,400 Nm
1,003 lbf ft
1,800 Nm
1,328 lbf ft
--
Recommended Min Make-Up Torque, over 2,000m
1,400
1,400
2,000
2,000
Min Yield Strength (joint)
1,070 MPa
155,191 psi
1,070 MPa
155,191 psi 1,070 MPa
155,191 psi
--
Min Tensile Strength (joint)
1,200 MPa
174,046 psi
1,200 MPa
174,046 psi 1,200 MPa
174,046 psi
Displacement Volume
0.76 l/m
0.20 gpm
0.98 l/m
0.26 gpm
1.45 l/m
0.38 gpm
Collapse Pressure
114 MPa
16,840 psi
81 MPa
11,782 psi
69 MPa
9,995 psi
160 mm (6.3 in) safe rod clamp area
Thru-wall induction hardened increasing joint strength
NHD-LW HHD-LW
210 mm (8.3 in) upset length Heat treat transition areas 260 mm (10.2 in) safe rod clamp area
PHD-LW
310 mm (12.2 in) upset length
Thru-wall induction hardened increasing joint strength
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions. These results can be reasonably expected but no guarantee is implied. Sandvik wireline drill rods require the use of Sandvik proprietary thread compound on initial make-up. * Box and pin ends have not been quench and tempered. **Manufactured from variable wall material, measurements are only representative of rod box/pin ends.
94 Sandvik Mining Exploration
RP600 SERIES WIRELINE DRILL RODS
CORING AFTERMARKET RP635 SERIES RODS WIRELINE DRILL RODS LIGHT WEIGHT Sandvik’s RP635 wireline drill rods offer you even greater depths by decreasing the overall weight of the string for less load on your drill. By using a variable wall material, this lighter weight drill rod features a thinner midbody while maintaining the Sandvik standard wireline threads’ true joint fit ensuring it can withstand the stresses of deeper hole drilling. Sandvik’s high quality standards and level of excellence in manufacturing has enabled us to provide wireline drill rods with optimal performance through superior: • Material specification • Heat treatment • Machining Sandvik’s RP635 rods are easily identified with three grooves on the pin end. Contact your Sandvik representative today. Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers !
95 Sandvik Mining Exploration
Sandvik RP635 rods are maunfactured using variable wall material and features the industry standard modified ACME thread on the box and pin ends with the appropriate stand-off gap to ensure a tight seal.
H-LW = 1850 m (6070) depth
N-LW = 2400 m (7874) depth
METRIC LENGTH RODS
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions. These results can be reasonably expected but no guarantee is implied.
Part No
Description
Length
ID*
OD*
Weight
mm
in
mm
in
kg
lb
BF00006460
Drill Rod, N-LW
3.0 m
60.3
2.37
69.9
2.75
20.40
44.97
BF00006462
Drill Rod, H-LW
3.0 m
77.8
3.06
88.9
3.50
27.00
59.52
METRIC LENGTH RODS Part No
Description
Length
ID*
OD*
Weight
mm
in
mm
in
kg
lb
BF00006461
Drill Rod, N-LW
10 ft
60.3
2.37
69.9
2.75
20.70
45.69
BF00006463
Drill Rod, H-LW
10 ft
77.8
3.06
88.9
3.50
27.40
60.48
*Manufactured from variable wall material, measurements are only representative of rod ends.
For more specification see the wireline drill rod specification sheet.
! Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers ! Sandvik’s environmentally friendly antigalling thread compound is available for purchase, contact your representative • 3.8 l container p/n BB00000241 • 20 l container p/n BB00000242
ROD BUNDLE DETAIL Bundle
Finished rods are bundled to protect the precision machined threads from the elements and potential impact damage, therefore sold in BUNDLE QUANTITIES ONLY
Length
Width
Height
Weight
# of Rods
m
ft
mm
in
mm
in
kg
lb
Qty per container
N
19
3.08
10.11
356
14.02
320
12.60
400
882
52
H
19
3.08
10.11
470
18.50
410
16.14
537
1,184
35
NOTE: Bundles per container is based on standard 40 ft shipping container. Details above are for metric length rods - 0.6 m or imperial length rod bundle details are available on request. Bundle weights are a guide for shipping purposes. Not to be used for calculation in drilling operations. Please refer to drill rod specification.
RP600 SERIES WIRELINE DRILL RODS
96 Sandvik Mining Exploration
Sandvik RP635 rods are maunfactured using variable wall material and features the industry standard modified ACME thread on the box and pin ends with the appropriate standoff gap to ensure a tight seal. SPECIFICATION
DRILL RODS N-LW
H-LW
METRIC
IMPERIAL
METRIC
IMPERIAL
Outer Diameter OD
69.90 mm
3.75 in
88.90 mm
3.50 in
Inner Diameter ID (box shoulder)
60.30 mm
2.37 in
77.80 mm
3.06 in
Inner Diameter ID (midbody)
61.82 mm
2.43 in
80.86 mm
3.18 in
Wall Thickness
4.80 mm
0.19 in
5.55 mm
0.22 in
Pin End Length
44.5 mm
1.8 in
44.5 mm
1.8 in
Thread Pitch
8.50 mm
0.33 in
8.50 mm
0.33 in
Weight
6.80 kg/m
4.57 lb/ft
9.00 kg/m
6.05 lb/ft
Rod Content Volume
2.98 l/m
0.79 gpm
5.05 l/m
1.34 gpm
Hole Volume
4.51 l/m
1.19 gpm
7.25 l/m
1.92 gpm
Rod/Hole Annulus Volume
0.68 l/m
0.18 gpm
1.05 l/m
0.28 gpm
Recommended Max Depth
2,400 m
7,874 ft
1,850 m
5,070 ft
Recommended Max Pullback
140 kN
31,550 lbf
215 kN
48,255 lbf
Recommended Max Drilling Torque
1,257 Nm
927 lbf ft
2,503 Nm
1,846 lbf ft
Recommended Min Make-Up Torque
1,257 Nm
927 lbf ft
2,503 Nm
1,846 lbf ft
Recommended Min Make-Up Torque, over 1000m
1,000 Nm
738 lbf ft
1,200 Nm
885 lbf ft
Recommended Min Make-Up Torque, over 2000m
1,200 Nm
885 lbf ft
--
--
Min Yield Strength (joint)
1,070 MPa
155,191 psi
1,070 MPa
155,191 psi
Min Tensile Strength (joint)
1,200 MPa
174,046 psi
1,200 MPa
174,046 psi
Displacement Volume
0.86 l/m
0.23 gpm
1.14 l/m
0.30 gpm
Collapse Pressure
60 MPa
8,709 psi
34 MPa
5,001 psi
160 mm (6.3 in) safe rod clamp area
Thru-wall induction hardened to increase joint strength
Heat treat transition areas
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions. These results can be reasonably expected but no guarantee is implied. Sandvik wireline drill rods require the use of Sandvik proprietary thread compound on initial make-up. * Box and pin ends have not been quench and tempered. **Manufactured from variable wall material, measurements are only representative of rod box/pin ends.
97 Sandvik Mining Exploration
RP600 SERIES WIRELINE DRILL RODS
EXPLORATION CORING TOOLS TK RODS RP662 & RP663 SERIES RODS THIN KERF LIGHT WEIGHT WIRELINE DRILL RODS
The RP660 series of thin kerf drill rod features thread profiles in their truest form for the best fit possible - instead of accepting common industry practices used on the finished machined threads, Sandvik has introduced a proprietary thread compound to address the issue of galling. Sandvik’s high quality standards and a level of excellence in manufacturing has enabled us to provide wireline drill rods with optimal performance through superior: • Material specification • Heat treatment (full length of rod for increased yield strength of thinner wall for thin kerf TK56, thin kerf TK66 and thin kerf TK76) • Machining Contact your Sandvik representative today.
Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
The RP662 series of drill rod features the a modified “T” thread on the box and pin ends with the appropriate stand-off gap to ensure a tight seal. RP662 - METRIC LENGTH RODS Part No
Description
Length
TK46 / TK76
200 m
1,300 m / 4,250 ft
ID
OD
Weight
mm
in
mm
in
kg
lb
BF00000893
Drill Rod, TK46
1.5 m
35.2
1.39
43.2
1.70
5.8
12.8
BF00000894
Drill Rod, TK46
3.0 m
35.2
1.39
43.2
1.70
11.5
25.4
BF00000915
Drill Rod, TK76
0.75 m
64.4
2.54
73.2
2.88
5.6
12.4
BF00000916
Drill Rod, TK76
1.5 m
64.4
2.54
73.2
2.88
11.1
24.5
BF00000912
Drill Rod, TK76
3.0 m
64.4
2.54
73.2
2.88
22.2
48.9
Length
ID
RP663 - METRIC LENGTH RODS Part No
1,500 m / 5,000 ft
TK66
1,350 m / 4,450 ft
TK65
200 m
Description
OD
Weight
mm
in
mm
in
kg
lb
BF00001239
Drill Rod, TK56
0.75 m
46.0
1.81
53.2
2.09
2.8
6.2
BF00001240
Drill Rod, TK56
1.5 m
46.0
1.81
53.2
2.09
5.7
12.6
BF00001241
Drill Rod, TK56
3.0 m
46.0
1.81
53.2
2.09
11.3
24.9
BF00001885
Drill Rod, TK66
0.75 m
57.0
2.24
63.9
2.52
3.8
8.4
BF00001886
Drill Rod, TK66
1.5 m
57.0
2.24
63.9
2.52
7.7
17.0
BF00001887
Drill Rod, TK66
3.0 m
57.0
2.24
63.9
2.52
15.3
33.7
All ratings have been calculated and are based on qualified drilling crews using high quality drilling tools in “normal” ground conditions. These results can be reasonably expected but no guarantee is implied. For more specification see the wireline drill rod specification sheet.
98 Sandvik Mining Exploration
Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers !
ROD BUNDLE DETAIL
BF00000893
#of rods 19
Length
Width
Height
Weight
Qty per container
m
ft
mm
in
mm
in
kg
lb
Bundles
Weight (kg)
1.58
5.18
227
8.93
206
8.11
114
251.3
192
21888
BF00000894
19
3.08
10.1
227
8.93
206
8.11
223
491.6
96
21408
BF00000915
19
0.83
2.72
386
15.19
344
13.54
113
249.1
180
20340
BF00000916
19
1.58
5.18
386
15.19
344
13.54
216
476.2
90
19440
BF00000912
19
3.08
10.1
386
15.19
344
13.54
426
939.2
45
19170
ROD BUNDLE DETAIL Bundle BF00001239
#of rods 19
Length
Width
Height
Weight
Qty per container
m
ft
mm
in
mm
in
kg
lb
Bundles
Weight (kg)
0.83
2.72
278
10.94
205
9.84
76
167.5
300
22800
BF00001240
19
1.58
5.18
278
10.94
250
9.84
145
319.7
150
21750
BF00001241
19
3.08
10.1
278
10.94
250
9.84
257
566.6
92
23644
BF00001885
19
0.83
2.72
333
13.11
298
11.73
80
176.4
288
23040
BF00001886
19
1.58
5.18
333
13.11
298
11.73
152
335.1
144
21888
BF00001887
19
3.08
10.1
333
13.11
298
11.73
299
659.2
72
21528
Sandvik’s environmentally friendly anti-galling thread compound is available for purchase. Contact your representative. • 3.8 l container p/n BB00000241 • 20 l container p/n BB00000242
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options.
MINING.SANDVIK.COM
99 Sandvik Mining Exploration
TS1-002:01/ENG © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
Bundle
EXPLORATION CORING TOOLS WIRE LINE CORE BARREL B CAM LATCH CAM LATCH SYSTEM
The wireline system has revolutionized the core retrieval process, but without tools you can depend on, the results could be unfavorable. Sandvik offers a reliable overshot for vertical down to -45° angle holes featuring robust lifting dogs and a safety pin for when handling the inner tube assembly out of the hole. Sandvik’s wireline core barrel now features a direct mechanical “cam” latching system for increased productivity. Its simple, three-piece design offers a reliable, easy loading, free falling alternative to current industry standards. SPECIFICATIONS
Contact your Sandvik representative today. Canadian Patent #2,655,113; other patents pending Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
Ø
mm
in
Hole
59.94
2.360
Core
36.40
1.433
100 Sandvik Mining Exploration
B WIRELINE CORE BARRELS
6
Item
Part No
Description
1-11
BF00003263
B core barrel assembly 1.5 m (5 ft)
1-11
BF00003264
B core barrel assembly 3.0 m (10 ft)
1-5
BF00003278
B inner tube assembly 1.5 m (5 ft)
1-5
BF00003279
B inner tube assembly 3.0 m (10 ft)
1
BB00001400
B head assembly
2
B INNER TUBE COMPONENTS 1
7
Item
Part No
Description
Qty
1
BB00001400
Head assembly
1
2
BA00000291
Inner tube 1.5 m (5 ft)
1
2
BA00000292
Inner tube 3.0 m (10 ft)
1
3
BA00000293
Stop ring
1
4
BA00000306
Core lifter - fluted
1
5
BA00000294
Core lifter case
1
-
BB00000379
Inner tube wrench
2
B OUTER TUBE COMPONENTS 8
9
Item
Part No
Description
Qty
6
BA00000312
Locking coupling - full hole
1
7
BA00000299
Adapter coupling
1
8
BA00000295
Landing ring
1
9
BA00000296
Outer tube 1.5 m (5 ft)
1
9
BA00000297
Outer tube 3.0 m (10 ft)
1
10
BA00000300
Inner tube stabilizer
1
11
BA00000298
Thread protector
1
-
BB00000380
Outer tube wrench
2
OPTIONS TO STANDARD CONFIGURATION
10
3
11
Item Part No
Description
2
BB00000134
Chrome plated - inner tube 1.5 m (5 ft)
2
BB00000135
Chrome plated - inner tube 3.0 m (10 ft)
4
BB00000997
Core lifter - slotted
6
BB00000130
Locking coupling - full hole, tanged, B
6
BB00000131
Locking coupling - full hole, BT
6
BB00000132
Locking coupling - full hole, tanged, BT
9
BF00004536
Chrome plated - outer tube 1.5 m (5 ft)
9
BF00004537
Chrome plated - outer tube 3.0 m (10 ft)
9
BF00002333
Full hole outer tube 1.5 m (5 ft)
9
BF00002330
Full hole outer tube 3.0 m (10 ft)
EXTENDED CORE BARRELS Item
Part No
Description
-
BB00000133
Inner tube coupling
4
5
B WIRELINE SYSTEMS
101 Sandvik Mining Exploration
B WIRELINE CORE BARRELS Item
Part No
Description
1-25
BB00001400
B head assembly
1
B HEAD COMPONENTS
2
Item
Part No
Description
Qty
3
1
BA00000137
Spearhead point
1
4
2
BA00000179
Compression spring
1
3
BA00000161
Detent plunger
1
4
BA00000165
Coiled spring pin 7/16" x 1"
1
5
BB00001383
Spearhead base
1
6
BB00001384
Latch retracting case
1
7
BA00000276
Spring pin 3/8” x 1-5/8”
2
8
BB00000888
Latch spring
1
9
BB00000665
Latch
2
10
BF00004071
Coiled spring pin 3/8" x 1-1/4"
1
11
BB00001385
Upper latch body
1
12
BB00001387
Landing shoulder
1
13
BA00000132
Stainless steel ball
1
14
BA00000131
Bushing
1
15
BB00001386
Lower latch body
1
16
BA00000442
Nord-lock washer
1
17
BA00000283
Lock nut
1
18
BA00000284
Spindle
1
13
19
BA00000337
Shut off valve - hard
2
14
20
BA00000286
Valve adjusting washer
2
21
BA00000311
Bearing
2
22
BA00000288
Spindle bushing
1
23
BA00000260
Compression spring
1
24
BA00000290
Self locking nut
1
25
BA00000333
Inner tube cap assembly
1
5 6 7
8
9 10
11 12
15
16 17 18 19 20 20
19
21
OPTIONS TO STANDARD CONFIGURATION Item
Part No
Description
Qty
14
BF00004542
Bushing - for deep holes
-
19
BA00000285
Shut off valve, soft
-
22 21
23 24 25
Canadian Patent #2,655,113; other patents pending
102 Sandvik Mining Exploration
B WIRELINE SYSTEMS
B WIRELINE CORE BARREL CONSUMABLE KITS
1
4 2 3 5 7 6 8 9 10 11 12 13 14 15
Item
Description
B
Qty
-
Consumables kit
BF00004340
-
1
Spearhead point
BA00000137
1
2
Compression spring
BA00000179
2
3
Detent plunger
BA00000161
1
4
Coiled spring pin
BA00000165
2
5
Spring pin
BA00000276
4
6
Latch spring
BB00000888
2
7
Latch
BB00000665
4
8
Coiled spring
BA00000274
4
9
Stainless steel ball
BA00000132
1
10
Bushing
BA00000131
4
11
Landing shoulder
BB00001387
2
12
Nord-lock washer
BA00000442
1
13
Lock nut
BA00000283
1
14
Shut off valve (hard)
BA00000337
4
15
Bearing
BA00000311
2
16
Spindle bushing
BA00000288
1
17
Self locking nut
BA00000290
2
18
Hydraulic grease fitting
BA00000134
2
19
Stop ring
BA00000293
5
20
Core lifter
BA00000306
20
21
Core lifter case
BA00000294
5
22
Landing ring
BA00000295
2
23
Inner tube stabilizer
BA00000300
4
16
17 18 19
To ensure you have the consumable parts available when you need them, Sandvik has developed a consumables kit for our wireline core barrels based on the average usage for 1000 m of drilling.
20
21
22
23
B WIRELINE SYSTEMS
103 Sandvik Mining Exploration
B compact wireline overshot 1 2 3 4 6 7 8
5
Item
Part No
Description
Qty
1-20
BF00003468
Overshot Assembly
-
1
BA00000349
Wire Rope Thimble
1
2
BA00000346
Eye Bolt
1
3
BA00000343
Cable Swivel Collar
1
4
BA00000352
Bearing
1
5
BA00000353
Castle Nut
1
6
BA00000356
Cotter Pin
1
7
BA00000134
Grease Fitting
1
8
BA00000347
Cable Swivel Body
1
9
BF00006315
Jar Staff
1
10
BA00000355
Jar Tube
1
11
BA00000354
Release Sleeve
1
12
BF00003469
Nord-lock Washer
1
13
BF00003470
Hex Nut
1
14
BA00000344
Set Screw 3/8" x 24 UNF x 5/8"
1
15
BA00000348
Compression Spring
1
16
BA00000360
Lifting Dog
2
17
BA00000342
Pin 1/2" x 1-1/2"
1
18
BA00000341
Spring Pin 3/16" x 1-3/8"
1
19
BF00002327
Safety Pin
1
20
BF00003467
Overshot Head
1
NOTE: The overshot is shipped with the release sleeve (item 11) attached to the assembly with the set screw (item 14), these must be removed prior to normal operation.
9 10
A safety pin (item 19) is included with the overshot assembly and can be used when handling the inner tube assembly out of the hole. When inserted into the overshot head, it helps to prevent the lifting dogs from releasing the spearhead point.
11
12 13
14 15 16 17 18 19 20
104 Sandvik Mining Exploration
B WIRELINE SYSTEMS
To have you up and running with the new industry standard, Sandvik has put together an all inclusive kit to ensure your conversion is made easy. Steps outlining the conversion from link latch to cam latch: 1. Remove link latch components as indicated in green 2. Reinstall the spearhead and retraction case components 3. Place the latch spring in the spring pocket between the two latches 4. Keeping these three items together, insert them into the upper latch body through the window in the retraction case 5. Pull up the retraction case to install the new coiled spring pin 6. Release the retraction case and fold in the latches to reinstall the spring pin For detailed step by step instructions and your conversion kit, contact your Sandvik representative today.
1
2
LINK LATCH TO CAM LATCH SYSTEM - B Item
Part No
Description
Qty
-
BF00004522
Conversion kit
-
1
BB00000888
Latch spring
1
2
BB00000665
Latch
2
3
BF00004071
Coiled spring pin 3/8" x 1-1/4"
1
4
BA00000276
Spring pin 3/8" x 1-5/8"
2
5
BF00004548
Drift pin (for spring pin)
1
6
BF00004549
Drift pin (for coiled spring pin)
1
7
BB00001031
Instruction card (not shown)
1
NOTE: It is recommend that while upgrading, the spring pin should be replaced with the coiled spring pin included in this kit (item #3). Recommended Tools: • Hammer • Rachet and 9/16 in socket (14 mm) • 4 in (100 mm) socket extension
3
4
5
6
Drift Tool
Patent pending.
B WIRELINE SYSTEMS
105 Sandvik Mining Exploration
SPRING LATCH TO CAM LATCH SYSTEM - B 1
Item
Part No
Description
Qty
1-15
BF00004521
Conversion assembly
-
2
1
BA00000137
Spearhead point
1
3
2
BA00000179
Compression spring
1
3
BA00000161
Detent plunger
1
4
BA00000165
Coiled spring pin 7/16" x 1"
1
5
5
BB00001383
Spearhead base
1
6
6
BB00001384
Latch retracting case
1
7
BA00000276
Spring pin 3/8" x 1-5/8"
2
8
BB00000888
Latch spring
1
9
BB00000665
Latch
2
10
BF00004071
Coiled spring pin 3/8" x 1-1/4"
1
11
BB00001385
Upper latch body
1
12
BB00001387
Landing shoulder
1
13
BA00000132
Stainless steel ball, 22 mm (not shown)
1
14
BA00000131
Bushing (not shown)
1
15
BB00001386
Lower latch body
1
4
7
8
9 10
These conversion assemblies can be used to convert most competitor core barrels, including link latch. Contact your Sandvik representative today.
11
12
15
106 Sandvik Mining Exploration
B WIRELINE SYSTEMS
EXPLORATION CORING TOOLS WIRE LINE CORE BARREL N/N2/N3 CAM LATCH CAM LATCH SYSTEM
The wireline system has revolutionized the core retrieval process, but without tools you can depend on, the results could be unfavorable. Sandvik offers a reliable overshot for vertical down to -45° angle holes featuring robust lifting dogs and a safety pin for when handling the inner tube assembly out of the hole. Sandvik’s wireline core barrel now features a direct mechanical “cam” latching system for increased productivity. Its simple, three-piece design offers a reliable, easy loading, free falling alternative to current industry standards. SPECIFICATIONS
Contact your Sandvik representative today. Canadian Patent #2,655,113; other patents pending Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
Ø
mm
in
Hole
75.69
2.980
N
47.63
1.875
N3
45.09
1.775
N2
50.67
1.995
Core
107 Sandvik Mining Exploration
N WIRELINE CORE BARRELS
6
Item
Part No
Description
1-11
BB00001047
N core barrel assembly 1.5 m (5 ft)
1-11
BB00001048
N core barrel assembly 3.0 m (10 ft)
1-5
BB00001046
N inner tube assembly 1.5 m (5 ft)
1-5
BB00001049
N inner tube assembly 3.0 m (10 ft)
1
BB00001045
N/N3 head assembly
2
N INNER TUBE COMPONENTS 1
7
Item
Part No
Description
Qty
1
BB00001045
Head assembly
1
2
BA00000148
Inner tube 1.5 m (5 ft)
1
2
BA00000149
Inner tube 3.0 m (10 ft)
1
3
BA00000120
Stop ring
1
4
BA00000118
Core lifter - fluted
1
5
BA00000154
Core lifter case
1
-
BB00001075
Inner tube wrench (full-grip)
2
N/N3 OUTER TUBE COMPONENTS 8
9
Item
Part No
Description
Qty
6
BA00000156
Locking coupling - full hole
1
7
BA00000147
Adapter coupling
1
8
BA00000121
Landing ring
1
9
BA00000126
Outer tube 1.5 m (5 ft)
1
9
BA00000127
Outer tube 3.0 m (10 ft)
1
10
BA00000122
Inner tube stabilizer
1
11
BA00000268
Thread protector
1
-
BB000001076
Outer tube wrench
2
OPTIONS TO STANDARD CONFIGURATION
10
3
Item Part No
Description
2
BB00000144
Chrome plated - inner tube 1.5 m (5 ft)
2
BB00000145
Chrome plated - inner tube 3.0 m (10 ft)
4
BB00001037
Core lifter - smooth
4
BB00000999
Core lifter - slotted
6
BB00000063
Locking coupling - full hole, tanged, N
6
BB00000064
Locking coupling - full hole, NT
6
BB00000065
Locking coupling - full hole, tanged, NT
6
BF00004538
Chrome plated - outer tube 1.5 m (5 ft)
6
BF00004519
Locking coupling - full hole, NHD
9
BF00004520
Locking coupling - full hole, tanged NHD
9
BF00004539
Chrome plated - outer tube 3.0 m (10 ft)
9
BF00002334
Full hole outer tube 1.5 m (5 ft)
9
BF00002331
Full hole outer tube 3.0 m (10 ft)
9
BF00005283
Chrome plated full hole outer tube 3.0 m (10 ft)
11
4
5
N WIRELINE SYSTEMS
EXTENDED CORE BARRELS Item
Part No
Description
-
BB00000066
Inner tube coupling
108 Sandvik Mining Exploration
N/N3 WIRELINE CORE BARRELS Item
Part No
Description
1-26
BB00001045
N/N3 head assembly
1
N/N3 HEAD COMPONENTS
2
Item
Part No
Description
Qty
3
1
BA00000137
Spearhead point
1
4
2
BA00000179
Compression spring
1
3
BA00000161
Detent plunger
1
5
4
BA00000165
Coiled spring pin 7/16" x 1"
1
6
5
BB00000146
Spearhead base
1
7
6
BB00000147
Latch retracting case
1
7
BA00000159
Spring pin 1/2" x 2"
2
8
BB00000777
Latch spring
1
9
BB00000666
Latch
2
10
BB00001059
Coiled spring pin 1/2" x 1-1/2"
1
11
BB00000148
Upper latch body
1
9
12
BB00000149
Landing shoulder
1
10
13
BA00000132
Stainless steel ball
1
14
BA00000131
Bushing
1
15
BB00000150
Lower latch body
1
16
BA00000441
Nord-lock washer
1
17
BA00000157
Lock nut
1
18
BA00000135
Spindle
1
13
19
BA00000139
Shut off valve - hard
2
14
20
BA00000153
Valve adjusting washer
2
21
BA00000163
Bearing
1
22
BA00000146
Spindle bushing
1
23
BA00000164
Bearing
1
16
24
BA00000123
Compression spring
1
17
25
BA00000158
Self locking nut
1
26
BA00000314
Inner tube cap assembly
1
8
11 12
15
18 19 20 20
19
21 22
OPTIONS TO STANDARD CONFIGURATION Item
Part No
Description
Qty
14
BF00004543
Bushing - for deep holes
-
19
BA00000138
Shut off valve, soft
-
23
24 25 26
Canadian Patent #2,655,113; other patents pending
109 Sandvik Mining Exploration
N WIRELINE SYSTEMS
N3 WIRELINE CORE BARRELS 2 3 11 4
1
Item
Part No
Description
1-16
BB00001067
N3 core barrel assembly 1.5m (5 ft)
1-16
BB00001068
N3 core barrel assembly 3.0 m (10 ft)
1-10
BB00001065
N3 inner tube assembly 1.5 m (5 ft)
1-10
BB00001066
N3 inner tube assembly 3.0 m (10 ft)
1
BB00001045
N/N3 head assembly
N3 INNER TUBE COMPONENTS
12
13
Item
Part No
Description
Qty
1
BB00001045
Head assembly
1
2
BA00000197
O ring
1
3
BA00000198
Piston
1
4
BA00000148
Inner tube 1.5 m (5 ft)
1
4
BA00000149
Inner tube 3.0 m (10 ft)
1
5
BF00006313
Split tube 1.5m (5ft) TRSS Sandvik
1
5
BF00006307
Split tube 3.0m (10ft) TRSS Sandvik
1
-
BF00006310
Split tube 6.0m (20ft) TRSS Sandvik
1
6
BA00000210
Stop ring
1
7
BA00000223
Core lifter - fluted
1
8
BA00000222
Core lifter case
1
9
BA00000382
Pump-out adapter
1
10
BA000000386 Piston plug
1
-
BB00001075
2
Inner tube wrench
14
N/N3 OUTER TUBE COMPONENTS
5
Item Part No
Description
Qty
11
BA00000156
Locking coupling - full hole
1
12
BA00000147
Adapter coupling
1
13
BA00000121
Landing ring
1
14
BA00000126
Outer tube 1.5 m (5 ft)
1
14
BA00000127
Outer tube 3.0 m (10 ft)
1
15
BA00000122
Inner tube stabilizer
1
16
BA00000268
Thread protector
1
-
BB000001076
Outer tube wrench
2
OPTIONS TO STANDARD CONFIGURATION
9
10
15 16 6 7 8
Item Part No
Description
7
BF00005028
Core lifter - slotted
-
BF00008375
Core lifter - basket core retainer
11
BB00000063
Locking coupling - full hole, tanged, N
11
BB00000064
Locking coupling - full hole, NT
11
BB00000065
Locking coupling - full hole, tanged NT
11
BF00004519
Locking coupling - full hole, NHD
11
BF00004520
Locking coupling - full hole, tanged NHD
14
BF00004538
Chrome plated - outer tube 1.5 m (5 ft)
14
BF00004539
Chrome plated - outer tube 3.0 m (10 ft)
14
BF00002334
Full hole outer tube 1.5 m (5 ft)
14
BF00002331
Full hole outer tube 3.0 m (10 ft)
14
BF00005283
Chrome plated full hole outer tube 3.0 m (10 ft)
EXTENDED CORE BARRELS
N WIRELINE SYSTEMS
Item Part No
Description
-
BB00000066
Inner tube coupling (for 6 m barrels)
-
BB00001405
Piston extender (for 6 m barrels)
110 Sandvik Mining Exploration
N/N3 WIRELINE CORE BARRELS Item
Part No
Description
1-26
BB00001045
N/N3 Head Assembly
N/N3 HEAD COMPONENTS
1
Item
Part No
Description
Qty
1
BA00000137
Spearhead point
1
3
2
BA00000179
Compression spring
1
4
3
BA00000161
Detent plunger
1
4
BA00000165
Coiled spring pin 7/16" x 1"
1
5
BB00000146
Spearhead base
1
6
BB00000147
Latch retracting case
1
7
BA00000159
Spring pin 1/2" x 2"
2
8
BB00000777
Latch spring
1
9
BB00000666
Latch
2
10
BB00001059
Coiled spring pin 1/2" x 1-1/2"
1
11
BB00000148
Upper latch body
1
12
BB00000149
Landing shoulder
1
13
BA00000132
Stainless steel ball
1
14
BA00000131
Bushing
1
15
BB00000150
Lower latch body
1
16
BA00000441
Nord-lock washer
1
17
BA00000157
Lock nut
1
18
BA00000135
Spindle
1
19
BA00000139
Shut off valve - hard
2
13
20
BA00000153
Valve adjusting washer
2
14
21
BA00000163
Bearing
1
22
BA00000146
Spindle bushing
1
23
BA00000164
Bearing
1
24
BA00000123
Compression spring
1
25
BA00000158
Self locking nut
1
26
BA00000314
Inner tube cap assembly
1
2
5 6 7
8
9 10
11 12
15
16 17 18 19 20 20
19
21
OPTIONS TO STANDARD CONFIGURATION Item
Part No
Description
Qty
14
BF00004543
Bushing - for deep holes
-
19
BA00000138
Shut off valve, soft
-
22 23
24 25 26
Canadian Patent #2,655,113; other patents pending
111 Sandvik Mining Exploration
N WIRELINE SYSTEMS
N2 WIRELINE CORE BARRELS
6
Item
Part No
Description
1-11
BB00001056
N2 core barrel assembly 1.5 m (5 ft)
1-11
BB00001057
N2 core barrel assembly 3.0 m (10 ft)
1-5
BB00001054
N2 inner tube assembly 1.5 m (5 ft)
1-5
BB00001055
N2 inner tube assembly 3.0 m (10 ft)
1
BB00001053
Head assembly
2
N2 INNER TUBE COMPONENTS 1
7
Item
Part No
Description
Qty
1
BB00001053
Head assembly
1
2
BA00000218
Inner tube 1.5 m (5 ft)
1
2
BA00000219
Inner tube 3.0 m (10 ft)
1
3
BA00000215
Stop ring
1
4
BA00000217
Core lifter - fluted
1
5
BA00000216
Core lifter case
1
-
BB00000325
Inner tube wrench
2
N2 OUTER TUBE COMPONENTS 8
9
Item
Part No
Description
Qty
6
BA00000156
Locking coupling - full hole
1
7
BA00000147
Adapter coupling
1
8
BA00000221
Landing ring
1
9
BA00000126
Outer tube 1.5 m (5 ft)
1
9
BA00000127
Outer tube 3.0 m (10 ft)
1
10
BA00000140
Inner tube stabilizer
1
11
BA00000268
Thread protector
1
-
BB000001076
Outer tube wrench
2
OPTIONS TO STANDARD CONFIGURATION
10
3
Item Part No
Description
2
BF00004523
Chrome plated - inner tube 1.5 m (5 ft)
2
BF00004524
Chrome plated - inner tube 3.0 m (10 ft)
4
BF00004984
Core lifter - smooth
4
BF00005027
Core lifter - slotted
6
BB00000063
Locking coupling - full hole, tanged, N
6
BB00000064
Locking coupling - full hole, NT
6
BB00000065
Locking coupling - full hole, tanged, NT
6
BF00004519
Locking coupling - full hole, NHD
6
BF00004520
Locking coupling - full hole, tanged, NHD
9
BF00004538
Chrome plated - outer tube 1.5 m (5 ft)
9
BF00004539
Chrome plated - outer tube 3.0 m (10 ft)
9
BF00002334
Full hole outer tube 1.5 m (5 ft)
9
BF00002331
Full hole outer tube 3.0 m (10 ft)
9
BF00005283
Chrome plated full hole outer tube 3.0 m (10 ft)
11
4
5
N WIRELINE SYSTEMS
EXTENDED CORE BARRELS Item
Part No
Description
-
BF00002526
Inner tube extension 3.4 m
112 Sandvik Mining Exploration
N2 WIRELINE CORE BARRELS Item
Part No
Description
1-26
BB00001053
N2 head assembly
1
N2 HEAD COMPONENTS
2
Item
Part No
Description
Qty
3
1
BA00000137
Spearhead point
1
4
2
BA00000179
Compression spring
1
3
BA00000161
Detent plunger
1
5
4
BA00000165
Coiled spring pin 7/16" x 1"
1
6
5
BB00000146
Spearhead base
1
7
6
BB00000147
Latch retracting case
1
7
BA00000159
Spring pin 1/2" x 2"
2
8
BB00000777
Latch spring
1
9
BB00000666
Latch
2
10
BB00001059
Coiled spring pin 1/2" x 1-1/2"
1
11
BB00000148
Upper latch body
1
9
12
BB00000589
Landing shoulder
1
10
13
BA00000132
Stainless steel ball
1
14
BA00000131
Bushing
1
15
BB00000150
Lower latch body
1
16
BA00000441
Nord-lock washer
1
17
BA00000157
Lock nut
1
18
BA00000135
Spindle
1
13
19
BA00000139
Shut off valve - hard
2
14
20
BA00000153
Valve adjusting washer
2
21
BA00000163
Bearing
1
22
BA00000146
Spindle bushing
1
23
BA00000164
Bearing
1
16
24
BA00000123
Compression spring
1
17
25
BA00000158
Self locking nut
1
26
BA00000321
Inner tube cap assembly
1
8
11 12
15
18 19 20 20
19
21
OPTIONS TO STANDARD CONFIGURATION Item
Part No
Description
Qty
14
BF00004543
Bushing - for deep holes
-
19
BA00000138
Shut off valve, soft
-
22 23
24 25
26
Canadian Patent #2,655,113; other patents pending
113 Sandvik Mining Exploration
N WIRELINE SYSTEMS
N/N2/N3 WIRELINE CORE BARREL CONSUMABLE KITS Item
Description
N
N2
N3
Qty
-
Consumables kit
BB00001028
BB00001029
BB00001030
-
1
Spearhead point
BA00000137
BA00000137
BA00000137
1
2
Compression spring
BA00000179
BA00000179
BA00000179
2
3
Detent plunger
BA00000161
BA00000161
BA00000161
1
4
Coiled spring pin
BA00000165
BA00000165
BA00000165
2
5
Spring pin
BA00000159
BA00000159
BA00000159
4
6
Latch spring
BB00000777
BB00000777
BB00000777
2
7
Latch
BB00000666
BB00000666
BB00000666
4
8
Coiled spring
BB00001059
BB00001059
BB00001059
4
9
Stainless steel ball
BA00000132
BA00000132
BA00000132
1
10
Bushing
BA00000131
BA00000131
BA00000131
4
8
11
Landing shoulder
BB00000149
BB00000589
BB00000149
2
9
12
Nord-lock washer
BA00000441
BA00000441
BA00000441
1
10
13
Lock nut
BA00000157
BA00000157
BA00000157
1
14
Shut off valve (hard)
BA00000139
BA00000139
BA00000139
4
15
Thrust bearing
BA00000163
BA00000163
BA00000163
2
16
Spindle bushing
BA00000146
BA00000146
BA00000146
1
17
Thrust bearing
BA00000164
BA00000164
BA00000164
2
18
Self locking nut
BA00000158
BA00000158
BA00000158
2
19
Hydraulic grease fitting
BA00000134
BA00000134
BA00000134
2
20
O-ring
-
-
BA00000197
5
21
Stop ring
BA00000120
BA00000215
BA00000210
5
22
Core lifter
BA00000118
BA00000217
BA00000223
20
23
Core lifter case
BA00000154
BA00000216
BA00000222
5
24
Landing ring
BA00000121
BA00000221
BA00000121
2
25
Inner tube stabilizer
BA00000122
BA00000140
BA00000122
4
1
4 2 3 5 7 6
11 12 13 14 15
16
17 18 19 20
To ensure you have the consumable parts available when you need them, Sandvik has developed a consumables kit for our wireline core barrels based on the average usage for 1000 m of drilling.
21 22
23
24
25
N WIRELINE SYSTEMS
114 Sandvik Mining Exploration
Item
Part No
Description
Qty
1-20
BB00000089
Overshot assembly
-
1
1
BA00000349
Wire rope thimble
1
2
2
BA00000346
Eye bolt
1
3
3
BA00000343
Cable swivel collar
1
5
4
BA00000352
Bearing
1
6
5
BA00000353
Castle nut
1
7
6
BA00000356
Cotter pin
1
7
BA00000134
Grease fitting
1
8
BA00000366
Cable swivel body
1
9
BB00000090
Jar staff
1
10
BB00000091
Jar tube
1
11
BA00000362
Release sleeve
1
12
BB00000095
Nord-lock washer
1
13
BB00000094
Hex nut
1
14
BA00000344
Set screw, 3/8 UNF x 3/4 Nyloc
1
15
BA00000348
Compression spring
1
16
BA00000515
Lifting dog
2
17
BA00000361
Pin 1/2" x 1-13/16"
1
18
BA00000504
Spring pin 1/4" x 1-3/4"
1
19
BF00002327
Safety pin
1
20
BB00000096
Overshot head
1
4
8
NOTE: The overshot is shipped with the release sleeve (item 11) attached to the assembly with the set screw, these must be removed prior to normal operation.
9
A safety pin (item 19) is included with the overshot assembly and can be used when handling the inner tube assembly out of the hole. When inserted into the overshot head, it helps to prevent the lifting dogs from releasing the spearhead point.
10
11
12 13
14 15 16 17 18 19 20
115 Sandvik Mining Exploration
N WIRELINE SYSTEMS
To have you up and running with the new industry standard, Sandvik has put together an all inclusive kit to ensure your conversion is made easy. Steps outlining the conversion from link latch to cam latch: 1. Remove link latch components as indicated in green 2. Reinstall the spearhead and retraction case components 3. Place the latch spring in the spring pocket between the two latches 4. Keeping these three items together, insert them into the upper latch body through the window in the retraction case 5. Pull up the retraction case to install the new coiled spring pin 6. Release the retraction case and fold in the latches to reinstall the spring pin For detailed step by step instructions and your conversion kit, contact your Sandvik representative today.
1
2
LINK LATCH TO CAM LATCH SYSTEM - N/N2/N3 Item
Part No
Description
Qty
-
BB00001032
Conversion kit
-
1
BB00000777
Latch spring
1
2
BB00000666
Latch
2
3
BB00001059
Coiled spring pin 1/2" x 1-1/2"
1
4
BA00000159
Spring pin 1/2" x 2"
2
5
BB00000234
Drift pin (for spring pin)
1
6
BB00000235
Drift pin (for coiled spring pin)
1
7
BB00001031
Instruction card (not shown)
1
NOTE: It is recommend that while upgrading, the spring pin should be replaced with the coiled spring pin included in this kit (item #3). Recommended Tools: • Hammer • Rachet and 9/16 in socket (14 mm) • 4 in (100 mm) socket extension
3
4
5
6
Drift Tool
Patent pending.
N WIRELINE SYSTEMS
116 Sandvik Mining Exploration
SPRING LATCH TO CAM LATCH SYSTEM - N/N3 Item
Part No
Description
Qty
1-15
BB00001072
Conversion Assembly
-
1
BA00000137
Spearhead Point
1
2
BA00000179
Compression Spring (not shown)
1
3
3
BA00000161
Detent Plunger
1
4
4
BA00000165
Coiled Spring Pin 7/16" x 1"
1
5
BB00000146
Spearhead Base
1
6
BB00000147
Latch Retracting Case
1
7
BA00000159
Spring Pin 1/2" x 2"
2
8
BB00000777
Latch Spring
1
9
BB00000666
Latch
2
10
BB00001059
Coiled Spring Pin 1/2" x 1-1/2"
1
11
BB00000148
Upper Latch Body
1
13
BA00000132
Stainless Steel Ball, 22 mm (not shown)
1
14
BA00000131
Bushing (not shown)
1
15
BB00000150
Lower Latch Body
1
1
5
6
7
8 9
SPRING LATCH TO CAM LATCH SYSTEM - N2 Item
Part No
Description
Qty
10
1-15
BB00001073
Conversion Assembly
-
11
1
BA00000137
Spearhead Point
1
2
BA00000179
Compression Spring (not shown)
1
3
BA00000161
Detent Plunger
1
4
BA00000165
Coiled Spring Pin 7/16" x 1"
1
5
BB00000146
Spearhead Base
1
6
BB00000147
Latch Retracting Case
1
7
BA00000159
Spring Pin 1/2" x 2"
2
8
BB00000777
Latch Spring
1
9
BB00000666
Latch
2
10
BB00001059
Coiled Spring Pin 1/2" x 1-1/2"
1
11
BB00000148
Upper Latch Body
1
13
BA00000132
Stainless Steel Ball, 22 mm (not shown)
1
14
BA00000131
Bushing (not shown)
1
15
BB00000150
Lower Latch Body
1
12
15
NOTE: The only difference between these two kits is the landing shoulder (item #12). These conversion assemblies can be used to convert most competitor core barrels, including link latch. Contact your Sandvik representative today.
117 Sandvik Mining Exploration
N WIRELINE SYSTEMS
EXPLORATION CORING TOOLS WIRE LINE CORE BARREL H/H3 CAM LATCH CAM LATCH SYSTEM
The wireline system has revolutionized the core retrieval process, but without tools you can depend on, the results could be unfavorable. Sandvik offers a reliable overshot for vertical down to -45° angle holes featuring robust lifting dogs and a safety pin for when handling the inner tube assembly out of the hole. Sandvik’s wireline core barrel now features a direct mechanical “cam” latching system for increased productivity. Its simple, three-piece design offers a reliable, easy loading, free falling alternative to current industry standards. SPECIFICATIONS
Contact your Sandvik representative today. Canadian Patent #2,655,113; other patents pending Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
Ø
mm
in
Hole
96,06
3.782
H
63,50
2.500
H3
61,11
2.406
Core:
118 Sandvik Mining Exploration
H WIRELINE CORE BARRELS
6
Item
Part No
Description
1-11
BF00003267
H core barrel assembly 1.5 m (5 ft)
1-11
BB00001042
H core barrel assembly 3.0 m (10 ft)
1-5
BF00003286
H inner tube assembly 1.5 m (5 ft)
1-5
BF00003287
H inner tube assembly 3.0 m (10 ft)
1
BB00001190
H/H3 head assembly
2
H INNER TUBE COMPONENTS 1
7
Item
Part No
Description
Qty
1
BB00001190
Head assembly
1
2
BA00000174
Inner tube 1.5 m (5 ft)
1
2
BA00000175
Inner tube 3.0 m (10 ft)
1
3
BA00000185
Stop ring
1
4
BA00000186
Core lifter - fluted
1
5
BA00000188
Core lifter case
1
-
BB00001076
Inner tube wrench
2
H/H3 OUTER TUBE COMPONENTS 8
9
Item
Part No
Description
Qty
6
BA00000208
Locking coupling - full hole
1
7
BA00000195
Adapter coupling
1
8
BA00000182
Landing ring
1
9
BA00000199
Outer tube 1.5 m (5 ft)
1
9
BA00000200
Outer tube 3.0 m (10 ft)
1
10
BA00000205
Inner tube stabilizer
1
11
BA00000204
Thread protector
1
-
BB00000803
Outer tube wrench (full-grip)
2
OPTIONS TO STANDARD CONFIGURATION
10
3
Item Part No
Description
2
BB00000139
Chrome plated - inner tube 1.5 m (5 ft)
2
BB00000140
Chrome plated - inner tube 3.0 m (10 ft)
4
BB00001038
Core lifter - smooth
4
BB00001001
Core lifter - slotted
6
BB00000067
Locking coupling - full hole, tanged, H
6
BB00000068
Locking coupling - full hole, HT
6
BB00000069
Locking coupling - full hole, tanged, HT
6
BF00003472
Locking coupling - full hole, HHD
6
BF00005229
Locking coupling - full hole, tanged, HHD
9
BF00004540
Chrome plated - outer tube 1.5 m (5 ft)
9
BF00004541
Chrome plated - outer tube 3.0 m (10 ft)
9
BF00002335
Full hole outer tube 1.5 m (5 ft)
9
BF00002332
Full hole outer tube 3.0 m (10 ft)
9
BF00005285
Chrome plated full hole outer tube 3.0 m (10 ft)
11
4
5
EXTENDED CORE BARRELS Item
Part No
Description
-
BB00000070
Inner tube coupling
H WIRELINE SYSTEMS
119 Sandvik Mining Exploration
H/H3 WIRELINE CORE BARRELS Item
Part No
Description
1-26
BB00001190
H/H3 head assembly
1
H/H3 HEAD COMPONENTS
2
Item
Part No
Description
Qty
1
BA00000137
Spearhead point
1
4
2
BA00000179
Compression spring
1
5
3
BA00000161
Detent plunger
1
4
BA00000165
Coiled spring pin 7/16" x 1"
1
5
BB00001202
Spearhead base
1
6
BB00001189
Latch retracting case
1
7
BA00000177
Spring pin 1/2" x 2-3/4"
2
8
BB00000777
Latch spring
1
9
BB00000667
Latch
2
10
BB00001060
Coiled spring pin 1/2" x 2"
1
11
BB00001185
Upper latch body
1
12
BB00001212
Landing shoulder
1
9
13
BA00000132
Stainless steel ball
1
10
14
BA00000131
Bushing
1
15
BB00001191
Lower latch body
1
16
BA00000332
Nord-lock washer
1
17
BA00000194
Lock nut
1
18
BA00000196
Spindle
1
19
BA00000181
Shut off valve - hard
2
20
BA00000171
Valve adjusting washer
2
21
BA00000211
Bearing
2
22
BA00000190
Spindle bushing
1
23
BA00000163
Bearing
1
24
BA00000166
Compression spring
1
25
BA00000212
Self locking nut
1
26
BA00000317
Inner tube cap assembly
1
3
6 7
8
11 12 13 14 15
16 17 18 19
OPTIONS TO STANDARD CONFIGURATION
20 20
19
21
Item
Part No
Description
Qty
14
BF00004544
Bushing - for deep holes
-
19
BA00000180
Shut off valve, soft
-
22 23
24
25 26
Canadian Patent #2,655,113; other patents pending
120 Sandvik Mining Exploration
H WIRELINE SYSTEMS
H3 WIRELINE CORE BARRELS 2 3 11 4
1
Item
Part No
Description
1-16
BF00003268
H3 core barrel assembly 1.5 M (5 ft)
1-16
BB00001043
H3 core barrel assembly 3.0 M (10 ft)
1-10
BF00003288
H3 inner tube assembly 1.5 M (5 ft)
1-10
BF00003289
H3 inner tube assembly 3.0 M (10 ft)
1
BB00001190
H/H3 head assembly
H3 INNER TUBE COMPONENTS
12
13
14
5
Item
Part No
Description
Qty
1
BB00001190
Head assembly
1
2
BA00000225
O ring
1
3
BA00000224
Piston
1
4
BA00000174
Inner tube 1.5 m (5 ft)
1
4
BA00000175
Inner tube 3.0 m (10 ft)
1
5
BF00006312
Split tube 1.5m (5ft) TRSS Sandvik
1
5
BF00006306
Split tube 3.0m (10ft) TRSS Sandvik
1
-
BF00006309
Split tube 6.0m (20ft) TRSS Sandvik
6
BA00000227
Stop ring
1
7
BA00000228
Core lifter - fluted
1
8
BA00000226
Core lifter case
1
9
BA00000385
Pump-out adapter
1
10
BA00000386
Piston plug
1
H/H3 OUTER TUBE COMPONENTS Item Part No
Description
Qty
11
BA00000208
Locking coupling - full hole
1
12
BA00000195
Adapter coupling
1
13
BA00000182
Landing ring
1
14
BA00000199
Outer tube 1.5 m (5 ft)
1
14
BA00000200
Outer tube 3.0 m (10 ft)
1
15
BA00000205
Inner tube stabilizer
1
16
BA00000204
Thread protector
1
OPTIONS TO STANDARD CONFIGURATION
9
10
15 16 6 7
Item Part No
Description
7
BF00005064
Core lifter - slotted
-
BF00008376
Core lifter - basket core retainer
11
BB00000067
Locking coupling - full hole, tanged, H
11
BB00000068
Locking coupling - full hole, HT
11
BB00000069
Locking coupling - full hole, tanged, HT
11
BF00003472
Locking coupling - full hole, HHD
11
BF00005229
Locking coupling - full hole, tanged, HHD
14
BF00004540
Chrome plated - outer tube 1.5 m (5 ft)
14
BF00004541
Chrome plated - outer tube 3.0 m (10 ft)
14
BF00002335
Full hole outer tube 1.5 m (5 ft)
14
BF00002332
Full hole outer tube 3.0 m (10 ft)
14
BF00005285
Chrome plated full hole outer tube 3.0 m (10 ft)
8
EXTENDED CORE BARRELS
H WIRELINE SYSTEMS
Item Part No
Description
-
BB00000070
Inner tube coupling (for 6 m barrels)
-
BB00000244
Piston extender (for 6 m barrels)
121 Sandvik Mining Exploration
H/H3 WIRELINE CORE BARRELS Item
Part No
Description
1-26
BB00001190
H/H3 head assembly
1
H/H3 HEAD COMPONENTS
2
Item
Part No
Description
Qty
1
BA00000137
Spearhead point
1
4
2
BA00000179
Compression spring
1
5
3
BA00000161
Detent plunger
1
4
BA00000165
Coiled spring pin 7/16" x 1"
1
5
BB00001202
Spearhead base
1
6
BB00001189
Latch retracting case
1
7
BA00000177
Spring pin 1/2" x 2-3/4"
2
8
BB00000777
Latch spring
1
9
BB00000667
Latch
2
10
BB00001060
Coiled spring pin 1/2" x 2"
1
11
BB00001185
Upper latch body
1
12
BB00001212
Landing shoulder
1
9
13
BA00000132
Stainless steel ball
1
10
14
BA00000131
Bushing
1
15
BB00001191
Lower latch body
1
16
BA00000332
Nord-lock washer
1
17
BA00000194
Lock nut
1
18
BA00000196
Spindle
1
19
BA00000181
Shut off valve - hard
2
20
BA00000171
Valve adjusting washer
2
21
BA00000211
Bearing
2
22
BA00000190
Spindle bushing
1
23
BA00000163
Bearing
1
24
BA00000166
Compression spring
1
25
BA00000212
Self locking nut
1
26
BA00000317
Inner tube cap assembly
1
3
6 7
8
11 12 13 14 15
16 17 18 19
OPTIONS TO STANDARD CONFIGURATION
20 20
19
21
Item
Part No
Description
Qty
14
BF00004544
Bushing - for deep holes
-
19
BA00000180
Shut off valve, soft
-
22 23
24
25 26
Canadian Patent #2,655,113; other patents pending
H WIRELINE SYSTEMS
122 Sandvik Mining Exploration
H/H3 WIRELINE CORE BARREL CONSUMABLE KITS Item
Description
H
H3
Qty
-
Consumables kit
BB00001192
BB00001193
-
1
Spearhead point
BA00000137
BA00000137
1
2
Compression spring
BA00000179
BA00000179
2
3
Detent plunger
BA00000161
BA00000161
1
4
Coiled spring pin
BA00000165
BA00000165
2
5
Spring pin
BA00000177
BA00000177
4
6
Latch spring
BB00000777
BB00000777
2
7
Latch
BB00000667
BB00000667
4
8
Coiled spring
BB00001060
BB00001060
4
9
Stainless steel ball
BA00000132
BA00000132
1
10
Bushing
BA00000131
BA00000131
4
8
11
Landing shoulder
BB00001212
BB00001212
2
9
12
Nord-lock washer
BA00000332
BA00000332
1
10
13
Lock nut
BA00000194
BA00000194
1
14
Shut off valve (hard)
BA00000181
BA00000181
4
15
Thrust bearing
BA00000211
BA00000211
2
16
Spindle bushing
BA00000190
BA00000190
1
17
Thrust bearing
BA00000163
BA00000163
2
18
Self locking nut
BA00000212
BA00000212
2
19
Hydraulic grease fitting
BA00000134
BA00000134
2
20
O ring
-
BA00000225
5
21
Stop ring
BA00000185
BA00000227
5
22
Core lifter
BA00000186
BA00000228
20
23
Core lifter case
BA00000188
BA00000226
5
24
Landing ring
BA00000182
BA00000182
2
25
Inner tube stabilizer
BA00000205
BA00000205
4
1
4 2 3 5 7 6
11 12 13 14 15
16
17 18 19 20
To ensure you have the consumable parts available when you need them, Sandvik has developed a consumables kit for our wireline core barrels based on the average usage for 1000 m of drilling.
21 22
23
24
25
H WIRELINE SYSTEMS
123 Sandvik Mining Exploration
H Compact Wireline Overshot Item
Part No
Description
Qty
1
1-20
BB00000102
Overshot Assembly
-
2
1
BA00000349
Wire Rope Thimble
1
2
BA00000346
Eye Bolt
1
3
BA00000343
Cable Swivel Collar
1
4
BA00000352
Bearing
1
5
BA00000353
Castle Nut
1
6
BA00000356
Cotter Pin
1
7
BA00000134
Grease Fitting
1
8
BA00000366
Cable Swivel Body
1
9
BB00000090
Jar Staff
1
10
BB00000091
Jar Tube
1
11
BA00000362
Release Sleeve
1
12
BB00000095
Nord-lock Washer
1
13
BB00000094
Hex Nut
1
14
BA00000344
Set Screw, 3/8 UNF x 3/4 Nyloc
1
15
BA00000348
Compression Spring
1
16
BA00000515
Lifting Dog
2
17
BB00000164
Pin 1/2" x 2-1/8"
1
18
BB00000165
Spring Pin 1/4" x 2"
1
19
BF00002327
Safety Pin
1
20
BB00000163
Overshot Head
1
3 4 6 7 8
5
NOTE: The overshot is shipped with the release sleeve (item 11) attached to the assembly with the set screw (item 14), these must be removed prior to normal operation.
9 10
A safety pin (item 19) is included with the overshot assembly and can be used when handling the inner tube assembly out of the hole. When inserted into the overshot head, it helps to prevent the lifting dogs from releasing the spearhead point.
11
12 13
14 15 16 17 18 19 20
124 Sandvik Mining Exploration
H WIRELINE SYSTEMS
To have you up and running with the new industry standard, Sandvik has put together an all inclusive kit to ensure your conversion is made easy. Steps outlining the conversion from link latch to cam latch: 1. Remove link latch components as indicated in green 2. Reinstall the spearhead and retraction case components 3. Place the latch spring in the spring pocket between the two latches 4. Keeping these three items together, insert them into the upper latch body through the window in the retraction case 5. Pull up the retraction case to install the new coiled spring pin 6. Release the retraction case and fold in the latches to reinstall the spring pin For detailed step by step instructions and your conversion kit, contact your Sandvik representative today.
1
2
LINK LATCH TO CAM LATCH SYSTEM - H/H3 Item
Part No
Description
Qty
-
BB00001194
Conversion Kit
-
1
BB00000777
Latch Spring
1
2
BB00000667
Latch
2
3
BB00001060
Coiled Spring Pin 1/2" x 2"
1
4
BA00000177
Spring Pin 1/2" x 2-3/4"
2
5
BB00000234
Drift Pin (for Spring Pin)
1
6
BB00000235
Drift Pin (for Coiled Spring Pin)
1
7
BB00001031
Instruction Card (not shown)
1
NOTE: It is recommend that while upgrading, the spring pin should be replaced with the coiled spring pin included in this kit (item #3). Recommended Tools: • Hammer • Rachet and 9/16 in socket (14 mm) • 4 in (100 mm) socket extension
3
4
5
6
Drift Tool
Patent pending.
H WIRELINE SYSTEMS
125 Sandvik Mining Exploration
SPRING LATCH TO CAM LATCH SYSTEM - H/H3 Item
Part No
Description
Qty
1-15
BB00001195
Conversion Assembly
-
1
BA00000137
Spearhead Point
1
2
BA00000179
Compression Spring
1
3
BA00000161
Detent Plunger
1
4
BA00000165
Coiled Spring Pin 7/16" x 1"
1
5
BB00001202
Spearhead Base
1
5
6
BB00001189
Latch Retracting Case
1
6
7
BA00000177
Spring Pin 1/2" x 2-3/4"
2
8
BB00000777
Latch Spring
1
9
BB00000667
Latch
2
10
BB00001060
Coiled Spring Pin 1/2" x 2"
1
11
BB00001185
Upper Latch Body
1
12
BB00001212
Landing Shoulder
1
13
BA00000132
Stainless Steel Ball, 22 mm (not shown)
1
14
BA00000131
Bushing (not shown)
1
15
BB00001191
Lower Latch Body
1
1 2 3 4
7
8
9 10
These conversion assemblies can be used to convert most competitor core barrels, including link latch. Contact your Sandvik representative today.
11
12
15
126 Sandvik Mining Exploration
H WIRELINE SYSTEMS
EXPLORATION CORING TOOLS WIRE LINE CORE BARREL P/P3 LW CAM LATCH LIGHT WEIGHT CORE BARREL FEATURING CAM LATCH SYSTEM
The wireline system has revolutionized the core retrieval process, but without tools you can depend on, the results could be unfavorable. Sandvik offers a reliable overshot for vertical down to -45° angle holes featuring robust lifting dogs and a safety pin for when handling the inner tube assembly out of the hole. Sandvik’s “P” wireline core barrel has been modified to include components of the smaller “H” system. This lighter weight core barrel makes it easier and safer for the driller to handle. Is also features the direct mechanical “cam” latching system for increased productivity. The simple, three-piece design offers a reliable, easy loading, free falling alternative to current industry standards. Contact your Sandvik representative today.
SPECIFICATIONS Ø
mm
in
Hole
122.61
4.827
Core: P-LW
84.96
3.345
83.06
3.270
P3-LW
Canadian Patent #2,655,113; other patents pending Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
127 Sandvik Mining Exploration
P-LW WIRELINE CORE BARRELS
6
Item
Part No
Description
1-11
BF00003269
P-LW core barrel assembly 1.5 m (5 ft)
1-11
BF00003270
P-LW core barrel assembly 3.0 m (10 ft)
1-5
BF00003290
P-LW inner tube assembly 1.5 m (5 ft)
1-5
BF00003291
P-LW inner tube assembly 3.0 m (10 ft)
1
BF00002275
P-LW/P3-LW head assembly
2
P-LW INNER TUBE COMPONENTS 1
7
Item
Part No
Description
Qty
1
BF00002275
Head assembly
1
2
BA00000247
Inner tube 1.5 m (5 ft)
1
2
BA00000248
Inner tube 3.0 m (10 ft)
1
3
BA00000250
Stop ring
1
4
BA00000236
Core lifter - fluted
1
5
BA00000239
Core lifter case
1
-
BB00000326
Inner tube wrench
2
P-LW/P3-LW OUTER TUBE COMPONENTS 8
9
Item
Part No
Description
6
BA00000242
Locking coupling - full hole, PHD/HWT 1
Qty
7
BA00000245
Adapter coupling
1
8
BA00000246
Landing ring
1
9
BA00000270
Outer tube 1.5 m (5 ft)
1
9
BA00000388
Outer tube 3.0 m (10 ft)
1
10
BA00000259
Inner tube stabilizer
1
11
BA00000263
Thread protector
1
-
BB00000327
Outer tube wrench
2
OPTIONS TO STANDARD CONFIGURATION Item Part No
Description
4
BF00006323
Core lifter - slotted
6
BF00005517
Locking coupling - full hole, tanged, PHD/ HWT
6
BF00006328
Locking coupling - full hole, PT
6
BF00006327
Locking coupling - full hole, tanged, PT
9
BF00006320
Chrome plated - outer tube 1.5 m (5 ft)
9
BF00006321
Chrome plated - outer tube 3.0 m (10 ft)
9
BF00006329
Full hole outer tube 1.5 m (5 ft)
9
BF00006330
Full hole outer tube 3.0 m (10 ft)
9
BF00006331
Chrome plated full hole outer tube 3.0 m (10 ft)
10
EXTENDED CORE BARRELS 3 4
11
Item
Part No
Description
-
BF00008871
Outer tube coupling (for 6 m barrels)
-
BF00008870
Inner tube coupling (for 6 m barrels)
5
P WIRELINE SYSTEMS
128 Sandvik Mining Exploration
P-LW/P3-LW WIRELINE CORE BARRELS
1
Part No
Description
1-28
BF00002275
P-LW/P3-LW head assembly
P-LW/P3-LW HEAD COMPONENTS Item
Part No
Description
Qty
1
BA00000137
Spearhead point
1
2
BA00000179
Compression spring
1
3
BA00000161
Detent plunger
1
4
BA00000165
Coiled spring pin 7/16" x 1"
1
5
BB00001202
Spearhead base
1
6
BB00001189
Latch retracting case
1
7
BA00000177
Spring pin 1/2" x 2-3/4"
2
8
BB00000777
Latch spring
1
9
BB00000668
Latch
2
10
BB00001060
Coiled spring pin 1/2" x 2"
1
11
BB00001185
Upper latch body
1
12
BB00001234
Landing shoulder
1
13
BA00000132
Stainless steel ball
1
14
BA00000131
Bushing
1
15
BB00001235
Lower latch body
1
16
BF00003257
Nord-lock washer
1
17
BF00003261
Lock nut
1
18
BF00002484
Spindle
1
19
BF00002469
Shut off valve - hard
2
14
20
BF00002470
Valve adjusting washer
2
15
21
BA00000211
Bearing
3
22
BF00002478
Spindle bushing
1
23
BF00002479
Tapered washer
1
24
BA00000134
Grease fitting
1
25
BF00005537
Compression spring
1
19
26
BF00005694
Washer
19
27
BF00003262
Self locking nut
1
28
BF00002529
Inner tube cap assembly
1
2 3 4 5 6 7 8
9 10 11 12
13
16 17 18 20 23
Item
20 21
24
OPTIONS TO STANDARD CONFIGURATION 22
Item
Part No
Description
Qty
19
BF00006318
Shut off valve, soft
-
25 26 27
28
Canadian Patent #2,655,113; other patents pending
P WIRELINE SYSTEMS
129 Sandvik Mining Exploration
P3-LW WIRELINE CORE BARRELS 2 3 11 4
1
Item
Part No
Description
1-16
BF00003271
P3-LW core barrel assembly 1.5 M (5 ft)
1-16
BF00003272
P3-LW core barrel assembly 3.0 M (10 ft)
1-10
BF00003292
P3-LW inner tube assembly 1.5 M (5 ft)
1-10
BF00003293
P3-LW inner tube assembly 3.0 M (10 ft)
1
BF00002275
P-LW/P3-LW head assembly
P3-LW INNER TUBE COMPONENTS
12
13
14
5
Item
Part No
Description
Qty
1
BF00002275
Head assembly
1
2
BA00000255
O-ring
1
3
BA00000258
Piston
1
4
BA00000247
Inner tube 1.5 m (5ft)
1
4
BA00000248
Inner tube 3.0 m (10ft)
1
5
BF00006314
Split tube 1.5m (5ft) TRSS Sandvik
1
5
BF00006308
Split tube 3.0m (10ft) TRSS Sandvik
1
-
BF00006311
Split tube 6.0m (20ft) TRSS Sandvik
1
6
BA00000251
Stop ring
1
7
BA00000254
Core lifter - fluted
1
8
BA00000252
Core lifter case
1
9
BA00000387
Pump-out adapter
1
10
BF00004036
Piston plug
1
P-LW/P3-LW OUTER TUBE COMPONENTS Item Part No
Description
Qty
11
BA00000242
Locking coupling - full hole, PHD/HWT
1
12
BA00000245
Adapter coupling
1
13
BA00000246
Landing ring
1
14
BA00000270
Outer tube 1.5 m (5 ft)
1
14
BA00000388
Outer tube 3.0 m (10 ft)
1
15
BA00000259
Inner tube stabilizer
1
16
BA00000263
Thread protector
1
OPTIONS TO STANDARD CONFIGURATION
9
Item Part No
Description
7
BF00006325
Core lifter - slotted
-
BF00008377
Core lifter - basket core retainer
11
BF00005517
Locking coupling - full hole, tanged, PHD/ HWT
11
BF00006328
Locking coupling - full hole, PT
11
BF00006327
Locking coupling - full hole, tanged, PT
14
BF00006320
Chrome plated - outer tube 1.5 m (5 ft)
14
BF00006321
Chrome plated - outer tube 3.0 m (10 ft)
14
BF00006329
Full hole outer tube 1.5 m (5 ft)
14
BF00006330
Full hole outer tube 3.0 m (10 ft)
14
BF00006331
Chrome plated full hole outer tube 3.0 m (10 ft)
10
15 16 6 7 8
EXTENDED CORE BARRELS Item Part No
Description
-
BF00008871
Outer tube coupling (for 6 m barrels)
-
BF00008870
Inner tube coupling (for 6 m barrels)
-
BF00008872
Piston extender (for 6 m barrels)
P WIRELINE SYSTEMS
130 Sandvik Mining Exploration
P-LW/P3-LW WIRELINE CORE BARRELS Item
Part No
Description
1-26
BF00002275
P-LW/P3-LW head assembly
P-LW/P3-LW HEAD COMPONENTS 1
Item
Part No
Description
Qty
1
BA00000137
Spearhead point
1
2
BA00000179
Compression spring
1
3
3
BA00000161
Detent plunger
1
4
4
BA00000165
Coiled spring pin 7/16" x 1"
1
5
BB00001202
Spearhead base
1
6
BB00001189
Latch retracting case
1
7
BA00000177
Spring pin 1/2" x 2-3/4"
2
8
BB00000777
Latch spring
1
9
BB00000668
Latch
2
10
BB00001060
Coiled spring pin 1/2" x 2"
1
11
BB00001185
Upper latch body
1
12
BB00001234
Landing shoulder
1
13
BA00000132
Stainless steel ball
1
14
BA00000131
Bushing
1
15
BB00001235
Lower latch body
1
16
BF00003257
Nord-lock washer
1
17
BF00003261
Lock nut
1
18
BF00002484
Spindle
1
19
BF00002469
Shut off valve - hard
2
13
20
BF00002470
Valve adjusting washer
2
14
21
BA00000211
Bearing
3
22
BF00002478
Spindle bushing
1
23
BF00002479
Tapered washer
1
16
24
BA00000134
Grease fitting
1
17
25
BF00005537
Compression spring
1
18
26
BF00005694
Washer
27
BF00003262
Self locking nut
1
28
BF00002529
Inner tube cap assembly
1
2
5 6 7 8
9 10 11 12
15
19 20 23
19
20 21
24 22
OPTIONS TO STANDARD CONFIGURATION Item
Part No
Description
Qty
19
BF00006318
Shut off valve, soft
-
25 26 27
28
Canadian Patent #2,655,113; other patents pending
131 Sandvik Mining Exploration
P WIRELINE SYSTEMS
P-LW/P3-LW WIRELINE CORE BARREL CONSUMABLE KITS Item
Description
P-LW
P3-LW
Qty
-
Consumables kit
BF00006232
BF00006233
-
1
Spearhead point
BA00000137
BA00000137
1
2
Compression spring
BA00000179
BA00000179
2
3
Detent plunger
BA00000161
BA00000161
1
3
4
Coiled spring pin
BA00000165
BA00000165
2
5
5
Spring pin
BA00000177
BA00000177
4
6
Latch spring
BB00000777
BB00000777
2
7
Latch
BB00000668
BB00000668
4
8
Coiled spring
BB00001060
BB00001060
4
9
Stainless steel ball
BA00000132
BA00000132
1
10
Bushing
BA00000131
BA00000131
4
11
Landing shoulder
BB00001234
BB00001234
2
12
Nord-lock washer
BF00003257
BF00003257
1
13
Lock nut
BF00003261
BF00003261
1
14
Shut off valve
BF00002469
BF00002469
4
15
Bearing
BA00000211
BA00000211
3
16
Spindle bushing
BF00002478
BF00002478
1
17
Self locking nut
BF00003262
BF00003262
2
18
Hydraulic grease fitting
BA00000134
BA00000134
2
19
O ring
-
BA00000255
5
20
Stop ring
BA00000250
BA00000251
5
21
Core lifter
BA00000236
BA00000254
20
22
Core lifter case
BA00000239
BA00000252
5
23
Landing ring
BA00000246
BA00000246
2
16
24
Inner tube stabilizer
BA00000259
BA00000259
4
17
To ensure you have the consumable parts available when you need them, Sandvik has developed a consumables kit for our wireline core barrels based on the average usage for 1000 m of drilling.
1
4
2
6
7
8 9 10 11 12 13 14 15
18 19 20
21
22
23
24
P WIRELINE SYSTEMS
132 Sandvik Mining Exploration
P compact wireline overshot Item
Part No
Description
Qty
1
1-21
BF00005516
Overshot assembly
-
2 3
1
BA00000349
Wire rope thimble
1
2
BA00000346
Eye bolt
1
3
BA00000343
Cable swivel collar
1
4
BA00000352
Bearing
1
5
BA00000356
Cotter pin
1
6
BA00000353
Castle nut
1
7
BA00000134
Grease fitting
1
8
BA00000366
Cable swivel body
1
9
BB00000091
Jar tube
1
10
BB00000090
Jar staff
1
11
BA00000362
Release sleeve
1
12
BB00000095
Nord-lock washer
1
13
BB00000094
Hex nut 3/4 UNC
1
14
BA00000344
Set screw 3/8" x 24 UNF x 5/8"
1
15
BA00000348
Compression spring
1
16
BA00000515
Lifting dog
2
17
BF00005513
Sleeve
1
18
BF00005514
Solid pin 1/2" x 3-1/4"
1
19
BB00000165
Spring pin 1/4” x 2”
1
20
BF00002327
Safety pin
1
21
BB00000163
Overshot head
1
4 5 6 7
8
NOTE: The overshot is shipped with the release sleeve (item 12) attached to the assembly with the set screw (item 15), these must be removed prior to normal operation.
9
A safety pin (item 21) is included with the overshot assembly and can be used when handling the inner tube assembly out of the hole. When inserted into the overshot head, it helps to prevent the lifting dogs from releasing the spearhead point.
10
11
12 13
14 15 16 17 18 19 20 21
133 Sandvik Mining Exploration
P WIRELINE SYSTEMS
To have you up and running with the new industry standard, Sandvik has put together an all inclusive kit to ensure your conversion is made easy. Steps outlining the conversion from link latch to cam latch: 1. Remove link latch components as indicated in green 2. Reinstall the spearhead and retraction case components 3. Place the latch spring in the spring pocket between the two latches 4. Keeping these three items together, insert them into the upper latch body through the window in the retraction case 5. Pull up the retraction case to install the new coiled spring pin 6. Release the retraction case and fold in the latches to reinstall the spring pin For detailed step by step instructions and your conversion kit, contact your Sandvik representative today.
1
2
LINK LATCH TO CAM LATCH SYSTEM - P-LW/P3-LW Item
Part No
Description
Qty
-
BF00006049
Conversion Kit
-
1
BB00000777
Latch Spring
1
2
BB00000668
Latch
2
3
BB00001060
Coiled Spring Pin 1/2" x 2"
1
4
BA00000177
Spring Pin 1/2" x 2-3/4"
2
5
BB00000234
Drift Pin (for Spring Pin)
1
6
BB00000235
Drift Pin (for Coiled Spring Pin)
1
7
BB00001031
Instruction Card (not shown)
1
NOTE: It is recommend that while upgrading, the spring pin should be replaced with the coiled spring pin included in this kit (item #3). Recommended Tools: • Hammer • Ratchet and 9/16” socket (14 mm) • 4” (100 mm) socket extension
Drift Tool
3
4
5
6
A A
NOTE: An upper latch body (p/n BB00001185) may be required if using a newer version of the link latch core barrel — see illustration above for correct upper latch body to be used with Sandvik’s cam latch system.
P WIRELINE SYSTEMS
134 Sandvik Mining Exploration
A
SPRING LATCH TO CAM LATCH SYSTEM - P/P3
1 2 3 4
5 6
7
8
9 10
Item
Part No
Description
Qty
1-15
BF00006048
Conversion Assembly
-
1
BA00000137
Spearhead point
1
2
BA00000179
Compression spring
1
3
BA00000161
Detent plunger
1
4
BA00000165
Coiled spring pin 7/16" x 1"
1
5
BB00001202
Spearhead base
1
6
BB00001189
Latch retracting case
1
7
BA00000177
Spring pin 1/2" x 2-3/4"
2
8
BB00000777
Latch spring
1
9
BB00000668
Latch
2
10
BB00001060
Coiled spring pin 1/2" x 2"
1
11
BB00001185
Upper latch body
1
12
BB00001234
Landing Shoulder
1
13
BA00000132
Stainless steel ball, 22 mm (not shown)
1
14
BA00000131
Bushing (not shown)
1
15
BB00001235
Lower latch body
1
These conversion assemblies can be used to convert most competitor core barrels, including link latch. Contact your Sandvik representative today.
11
12
15
135 Sandvik Mining Exploration
P WIRELINE SYSTEMS
Exploration Coring Tools ADAPTER SUBS MULTIFUNCTIONAL SYSTEM FOR STANDARD AND PUMP-IN APPLICATIONS
Sandvik’s high quality standards and level of excellence in manufacturing has enabled us to provide adapter subs for use with our wireline drill rods for optimal performance through superior: • Material specification • Heat treatment of wireline pin treads for increased durability • Machining Adapter subs manufactured for use with Sandvik’s heavy duty RP625 and RP630 wireline drill rods have been marked with two grooves for easy identification. Contact your Sandvik representative today. Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
Note: to get the maximum performance and life from your drill rod, it is recommended that you do not mix Sandvik rods with rods or adapter subs from other manufacturers; Please refer to the adapter subpage for complete selection of Sandvik Adapter subs. Sandvik's anti-galling joint compound MUST be used on the inital make and break of every rod - DO NOT REMOVE. Failure to comply can result in your warrenty being cancelled. Although the materials, process and thread design may appear similar, dimensions and tolerances may vary between manufacturers !
136 Sandvik Mining Exploration
Pin End
BB00000111
AW rod
B w/l rod
BB00000229
AW rod
BT rod
BB00000897
AW rod
BW casing
BA00001650
BW rod
B w/l rod
BB00000230
BW rod
BT rod
BA00001651
NW rod
B rod
BB00000233
NW rod
BT rod
Part No
Box End
Pin End
BB00000186
B w/l rod
BW casing
BA00001655
B w/l rod
BT rod
BB00000115
B w/l rod
N w/l rod
BA00001652
BT rod
BW casing
BF00000968
BT rod
B w/l rod
BF00004879
N w/l rod
B w/l rod
BB00000772
NW casing
B w/l rod
Part No
Pin End
Box End
BF00007347
B w/l rod
B w/l rod
BB00000236
BT rod
BT rod
N SYSTEMS
Pin End
B SYSTEMS
Water Swivel/Hoisting Plug Part No
P SYSTEMS
H SYSTEMS
Rod/Casing
Saver Sub
Pin End
Pin End
BF00006639
NW rod
B w/l rod
BF00006812
NW rod
BT rod
BLANKS
Rod Spinner Sub - 300 mm (11.8 in) length Part No
Starter Rod Part No
Box End
Box End
Length
BA00001745
NW rod
3-1/2 API IF
450
BA00001748
NW rod
3-1/2 API IF
730
Recovery Tool to Rod / Casing Part No
Box End
Pin End
BB00000103
B w/l rod
AW rod
BB00000189
B w/l rod
BW rod
BA00001653
BT rod
AW rod
BA00001656
BT rod
BW rod
SANDVIK CORING AFTERMARKET
137 Sandvik Mining Exploration
Box End
Box End
Length
BB00000106
AW rod
N w/l rod
BA00001745
NW rod
3-1/2 API IF
450
BB00000330
AW rod
NT rod
BA00001748
NW rod
3-1/2 API IF
730
BF00007236
AW rod
NHD rod
BU00018256
N rod
3-1/2 API
730
BB00000114
AW rod
NW casing
BU00019975
NT rod
3-1/2 API
730
BB00000116
BW rod
N w/l rod
BU00018258
NHD rod
3-1/2 API
730
BB00000331
BW rod
NT rod
BU00019977
NW casing
3-1/2 API
730
BF00004496
BW rod
NHD rod
BB00000881
BW rod
NW casing
BB00000117
NW rod
N w/l rod
BB00000332
NW rod
NT rod
BF00004497
NW rod
NHD rod
! Recovery Tool to Rod/Casing !
Rod/Casing
Part No
Box End
Pin End
BB00000109
N w/l rod
BW rod
BB00000110
N w/l rod
NW rod
BF00004740
NT w/l rod
BW rod
BF00004742
NT rod
NW rod
Part No
Box End
Pin End
BF00004499
NHD rod
NW rod
BF00004879
N w/l rod
B w/l rod
BF00004498
NHD rod
BW rod
BA00001658
N w/l rod
NT rod
BF00002325
N w/l rod
NHD rod !
BB00000752
N w/l rod
H w/l rod
Bullnose adapter sub
BB00000107
N w/l rod
NW casing
Part No
Pin End
Pin End
BB00000187
N w/l rod
HW casing
BB00001069
N pin bullnose
NW rod
BB00000108
N w/l rod
PHD rod /HWT casing
BA00001659
NT rod
N w/l rod
BF00004051
NT rod
NW casing
BF00002324
NHD rod
!
N w/l rod
BF00005497
NHD rod
!
HHD rod
BF00004500
NHD rod
!
NW casing
BF00004501
NHD rod
!
HW casing
BF00004502
NHD rod
!
HWT casing
BB00000115
B w/l rod
N w/l rod
BF00004883
H w/l rod
N w/l rod
BB00000772
NW rod
B w/l rod
Part No
Box End
Box End
BF00006335
N rod
NW rod
Part No
Pin End
Box End
BB00000320
N w/l rod
N w/l rod
Part No
Pin End
Box End
BF00007345
N w/l rod
N w/l rod
BF00006816
NT rod
BF00006814
NHD rod
! NHD adapter subs are now available for use with Sandvik’s RP625 and RP630 wireline drill rods. They are easily identified with two grooves.
BLANKS
!
!
Saver Sub
NT rod !
NHD rod
!
Rod Spinner Sub - 300 mm (11.8 in) length Part No
Pin End
Pin End
BF00007958
NW rod
N w/l rod
BF00006811
NW rod
NT rod
BA00001819
NW rod
NHD rod
!
SANDVIK CORING AFTERMARKET
138 Sandvik Mining Exploration
B SYSTEMS
Part No
N SYSTEMS
Pin End
H SYSTEMS
Starter Rod
Pin End
P SYSTEMS
Water Swivel/Hoisting Plug Part No
Saver Sub
Pin End
Pin End
Part No
Pin End
Box End
BB00000020
AW rod
H w/l rod
BF00004884
H w/l rod
H w/l rod
BF00004743
AW rod
HT rod
BF00006817
HT rod
BF00004744
AW rod
HW casing
BF00006815
HHD rod
BB00000021
AW rod
PHD rod /HWT casing
BB00000049
BW rod
H w/l rod
Rod Spinner Sub - 300 mm (11.8 in) length
BF00004747
BW rod
HT rod
Part No
Pin End
Pin End
BF00004508
BW rod
HHD rod
BG00605985
AM rod
HHD rod
BA00001870
BW rod
HW casing
BF00006640
NW rod
H w/l rod
BB00000413
BW rod
PHD rod /HWT casing
BF00006810
NW rod
HT rod
BF00003534
NW rod
HHD rod
BF00006641
NW rod
HW casing
HT rod !
HHD rod
NW rod
H w/l rod
BF00004748
NW rod
HT rod
BF00003471
NW rod
HHD rod
BA00001872
NW rod
HW casing
Starter Rod
BB00000412
NW rod
HWT casing
Part No
Box End
Box End
Length
BA00001745
NW rod
3-1/2 API IF
450
BA00001748
NW rod
3-1/2 API IF
730
BU00018160
H rod
3-1/2 API IF
730
!
Rod/Casing Part No
Box End
Pin End
BU00019982
HT rod
3-1/2 API IF
730
BF00004883
H w/l rod
N w/l rod
BU00019983
HHD rod
3-1/2 API IF
730
BF00004777
H w/l rod
HT rod
BU00019984
HW casing
3-1/2 API IF
730
BA00001874
H w/l rod
HHD rod !
BB00000118
H w/l rod
NW casing
BB00000185
H w/l rod
HW casing
BB00000112
H w/l rod
PHD rod /HWT casing
BA00001873
Part No
Box End
Pin End
BB00000188
H w/l rod
NW rod
BF00004753
HT rod
NW rod
H w/l rod
BF00004756
H w/l rod
HW rod
NW casing
BF00004754
HT rod
HW rod
BF00004509
HHD rod
BW rod
BG00422586
H w/l rod
BW rod
BF00004510
HHD rod
NW rod
BA00001875
HHD rod
HW rod
SHD rod /PWT casing
HT rod HT rod
Recovery Tool to Rod/Casing
BF00004750
HT rod
HW casing
BF00004751
HT rod
PHD rod /HWT casing
BF00007959
HHD rod
!
N w/l rod
BF00003543
HHD rod
!
H w/l rod
BF00004512
HHD rod
!
NW casing
BF00004513
HHD rod
!
HW casing
BF00004514
HHD rod
!
PHD rod /HWT casing
BB00000752
N w/l rod
H w/l rod
BF00006645
HW rod
PHD rod /HWT casing
Part No
Box End
Box End
BF00006337
H rod
NW rod
Part No
Pin End
Box End
BB00000321
H w/l rod
H w/l rod
BB00000322
N w/l rod
H w/l rod
! !
!
Bullnose adapter sub Part No
Pin End
Pin End
!
BF00005048
H pin bullnose
NW rod
!
! HHD adapter subs are now available for use with Sandvik’s RP625 and RP630 wireline drill rods. They are easily identified with two grooves.
SANDVIK CORING AFTERMARKET
139 Sandvik Mining Exploration
BLANKS
BF00004752
H w/l rod
!
H SYSTEMS
!
P SYSTEMS
!
N SYSTEMS
!
BB00000097
BF00007237
!
B SYSTEMS
Water Swivel/Hoisting Plug Part No
Bullnose adapter sub
BF00004762
AW rod
PHD rod /HWT casing
BB00000324
AW rod
PW casing
BF00004763
AW rod
PWT casing
BF00004766
BW rod
PHD rod /HWT casing
BA00001871
BW rod
PW casing
BF00004764
BW rod
PWT casing
BF00004767
NW rod
PHD rod /HWT casing
BB00000323
NW rod
PW casing
BF00002289
NW rod
PWT casing
Part No
Box End
Pin End
BA00001876
PHD rod /HWT casing
!
PHD rod /HWT casing
!
PHD rod /HWT casing
!
PHD rod /HWT casing
!
Part No
Pin End
Pin End
BA00001879
P pin bullnose
NW rod
!
! PHD adapter subs are now available for use with Sandvik’s RP625 and RP630 wireline drill rods. They are easily identified with two grooves.
N SYSTEMS
Pin End
!
!
H SYSTEMS
Pin End
Rod/Casing
BF00002288 BF00004773
PHD rod /HWT casing
!
P SYSTEMS
BA00001877
HW casing
PW casing
PW casing
SHD rod /PWT casing
!
SHD rod /PWT casing
!
BB00000329
PWT casing
PW casing
BB00000772
NW rod
B w/l rod
Part No
Pin End
Box End
BF00006813
PHD rod /HWT casing
BLANKS
BA00001878
Saver Sub
!
PHD rod /HWT casing
!
Rod Spinner Sub - 300 mm (11.8 in) length Part No
Pin End
Pin End
BF00008115
NW rod
PHD rod /HWT casing
!
Starter Rod Part No
Box End
Box End
Length
BA00001745
NW rod
3-1/2 API IF
450
BA00001748
NW rod
3-1/2 API IF
730
BU00018263
HWT/PHD
3-1/2 API IF
730
BU00019984
PWT/SHD
3-1/2 API IF
730
Recovery Tool to Rod/Casing Part No
Box End
BF00004769
PHD rod /HWT casing
!
PHD rod /HWT casing
!
BF00004770
B SYSTEMS
Water Swivel/Hoisting Plug Part No
Pin End NW rod HW rod
SANDVIK CORING AFTERMARKET
140 Sandvik Mining Exploration
TUBING Blanks N system
Part No
Box End
Pin End
Part No
Box End
Pin End
BF00005002
N w/l rod
Solid blank
BF00005011
Tubing blank
N w/l Rod
BF00008114
N w/l rod
Solid blank
BF00005016
N w/l rod
Tubing blank
BF00005006
NT rod
Solid blank
BF00005013
Tubing blank
NT rod
BF00004999
Solid blank
NT rod
BF00005020
NT rod
Tubing blank
BF00004506
NHD rod
Solid blank
BF00004507
Tubing blank
NHD rod
BF00004504
Solid blank
BF00004505
NHD rod
!
NHD rod
!
Box End
Pin End
BF00005003
H w/l rod
Solid blank
BF00004996
Solid blank
H w/l rod
BF00005007
HT rod
Solid blank
BF00005000
Solid blank
HT rod
BF00004515
HHD rod
BF00004516
Solid blank
HHD rod
Part No
Box End
Pin End
BF00005004
PHD rod /HWT casing !
Solid blank
BF00004998
Solid blank
PHD rod /HWT casing
!
Tubing blank
! Adapter subs are now available for use with Sandvik’s RP625 heavy-duty wireline drill rods. They are easily identified with two grooves.
H system Part No
!
!
NOTE: To ensure maximum performance and life from your wireline drill rods, Sandvik has heat treated all adapter sub pin ends containing W/L, T, and HD drill rod thread profile.
Solid blank !
P system
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options.
mining.sandvik.com
141 Sandvik Mining Exploration
TS1-039:01/ENG © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
BLANKS
SOLID Blanks N system
EXPLORATION CORING TOOLS CASING CUTTERS
Get the Sandvik advantage with quality drilling accessories, such as our water swivels, hoisting plugs and casing cutters. The casing cutter is a critical tool available to the drilling crews and can be used at any point in the drill hole when the entire drill string cannot be retrieved. Available in; AW, BW, NW/H and HW/HWT. Contact your Sandvik representative today. Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
142 Sandvik Mining Exploration
CASING CUTTER - AW
1
Item Part No
Description
Qty
1-7
BF00008278
Casing cutter assembly AW
1
1
BF00008279
Rod plunger upper AW case cutter
1
2
BF00008280
Rod plunger lower AW case cutter
1
3
BF00008281
Compression spring AW case cutter
1
4
BF00008282
Body AW case cutter
1
5
BF00008283
Lug AW case cutter
2
6
BF00008284
Pin AW case cutter lug
2
7
BF00008285
Spring pin AW case cutter body
1
2
3
4
6
5 6
CASING CUTTER
5
143 Sandvik Mining Exploration
CASING CUTTER - BW
1
2
3
Item
Part No
Description
Qty
1-12
BF00008153
Casing cutter assembly BW
1
1
BB00001081
Retaining ring BW case cutter
1
2
BB00001082
Body plunger BW case cutter
1
3
BF00008313
S/Steel ball BW case cutter
1
4
BB00001083
Water tube BW case cutter
1
5
BB00001084
Plunger BW case cutter
1
6
BF00008314
Pin BW case cutter plunger
1
7
BF00004336
Compression spring BW case cutter
1
8
BB00001087
Rest spring BW case cutter
1
9
BB00001085
Body BW case cutter
1
10
BB00001086
Lug BW case cutter
2
11
BF00008315
Pin BW case cutter lug
2
12
BB00000937
Set screw BW case cutter body
1
4
5 6
7
8
10
9
10 11 12
144 Sandvik Mining Exploration
CASING CUTTER
CASING CUTTER - NW/H
1
2
3
Item Part No
Description
Qty
1-12 BF00004040
Casing cutter assembly NW/H
1
1
BB00000926
Retaining ring NW/HW case cutter
1
2
BB00000927
Body plunger NW case cutter
1
3
BB00000928
S/Steel ball NW/HW case cutter
1
4
BB00000929
Water tube NW case cutter
1
5
BB00000930
Plunger NW/HW case cutter
1
6
BB00000931
Pin NW/HW case cutter plunger
1
7
BB00000932
Compression spring NW/HW case cutter
1
8
BB00000933
Rest spring NW case cutter
1
9
BB00000934
Body NW case cutter
1
10
BB00000935
Lug NW case cutter
2
11
BB00000936
Pin NW case cutter lug
2
12
BB00000937
Set screw NW case cutter body
1
4
5 6
7
8
10
9
10 11 12
CASING CUTTER
145 Sandvik Mining Exploration
CASING CUTTER - HW/HWT
1
2
3 4
Item Part No
Description
Qty
1-8
BF00005687
Casing cutter assembly HW/HWT
1
1
BB00000926
Retaining ring NW/HW case cutter
1
2
BB00000928
S/Steel ball NW/HW case cutter
1
3
BB00000930
Plunger NW/HW case cutter
1
4
BB00000931
Pin NW/HW case cutter plunger
1
5
BB00000932
Compression spring NW/HW case cutter
1
6
BB00001089
Body HW case cutter
1
7
BB00001090
Lug HW case cutter
2
8
BF00006601
Pin HW case cutter lug
2
5
6
7
7 8
146 Sandvik Mining Exploration
CASING CUTTER
CORE DRILLING TOOLS RECOVERY TAPS & BOWEN SPEAR FISHING TOOLS
RECOVERY TAP Item Part No
Description
Qty
1
BB00000192
B W/L RECOVERY TAP - AW ROD BOX
1
2
BB00000155
N WL/BW RECOVERY TAP - BW ROD BOX
1
3
BB00000190
H WL RECOVERY TAP - NW ROD BOX
1
4
BB00000156
NW RECOVERY TAP - NW ROD BOX
1
5
BB00000191
P WL/HWT/HW RECOVERY TAP - NW ROD BOX
1
BOWEN SPEAR FISHING TOOL Item Part No
Description
Qty
Item Part No
Description
Qty
1
BG00609113
B Grapple BST Fishing Tool
1
2
BG00609117
N Grapple BST Fishing Tool
1
3
BG00609119
H Grapple BST Fishing Tool
1
4
BG00609121
P Grapple BST Fishing Tool
1
147 Sandvik Mining Exploration
EXPLORATION CORING TOOLS WATER SWIVELS AND HOISTING PLUGS
Get the Sandvik advantage with quality drilling accessories, such as our water swivels, hoisting plugs and casing cutters. Our water swivels have been designed for easy field maintenance in both underground and surface applications: • High speed water swivel • Compact water swivel - surface and underground versions available • Universal water swivel Contact your Sandvik representative today. ROTATING LOAD RATING
Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
Compact (surface)
4,550 kg (10,000 lb)
Universal 25K
5,000 kg (11,000 lb)
Universal 40K
5,400 kg (12,000 lb)
148 Sandvik Mining Exploration
Water swivel - Universal 25K Item
Part No
Description
Qty
1-15
BB00000593
Universal water swivel
1
1
BB00000613
Hoisting cap
1
2
BB00000604
Compression spring
1
3
BB00000606
O-ring
1
4
BB00000607
Swivel packing
1
-
BB00000971
Upper packing guide
-
-
BB00000970
Lower packing guide
-
2
5
BB00000608
Spindle extension
1
3
6
BB00000614
Packing housing
1
7
BB00000609
Spindle nut
1
8
BB00000610
Retaining ring
1
9
BB00000616
Lock washer
1
10
BB00000611
Spacer
1
11
BB00000775
Ball bearing
1
12
BB00000615
Swivel body
1
13
BB00000605
Thrust bearing
1
14
BB00000612
Spindle
1
15
BA00000134
Grease nipple
1
1
4 5 6 7
9
8 10 11 12 15
13 14
Hose connection #20 NPT BW rod box connection For use with B, N, H and P systems
Water swivel - Compact Universal 25K Consumables 16
20
17 21 18 22 19
Item
Part No
Description
Qty
16-22
BB00005787
Consumables kit
-
16
BB00000607
Swivel packing
1
17
BB00000606
O-ring
1
18
BB00000616
Lock washer
1
19
BB00000610
Retaining ring
1
20
BB00000605
Thrust bearing
1
21
BB00000775
Bearing
1
22
BB00000608
Spindle extension
1
149 Sandvik Mining Exploration
Water swivel - Universal 40K
1
2 3 8 12
Part No
Description
Qty
1-18
BB00001119
Universal water swivel 40K
1
1
BB00000688
Hoisting cap
1
2
BB00001116
Compression spring
1
3
BB00001118
O-ring
1
4
BF00006603
Packing upper
1
5
BB00001117
Swivel packing
3
6
BF00006604
Packing lower
1
7
BB00000684
Spindle extension
1
8
BF00001095
Screw
1
4
9
BB00000686
Packing housing
1
5
10
BB00000683
Spindle nut
1
6
11
BB00000689
Disc spring
1
7
12
BB00006602
Retaining ring
1
9
13
BB00000690
Spacer
1
10
14
BF00006607
Thrust bearing
1
15
BB00000682
Swivel body
1
16
BB00000687
Spacer
1
17
BA00000134
Grease nipple
1
18
BB00000685
Spindle
1
11 13
17
Item
14 15 16 18
Hose connection #20 NPT NW rod box connection For use with B, N, H and P systems
19
Water swivel - Compact Universal 40K Consumables 24
20 25 21
22
23
26
27
Item
Part No
Description
Qty
19-27
BB00001122
Consumables kit
-
19
BB00001117
Swivel packing
1
20
BB00001118
O-ring
1
21
BB00000689
Disc spring
1
22
BB00006602
Retaining ring
1
23
BF00006603
Packing upper
1
24
BB00006607
Thrust bearing
1
25
BB00000684
Spindle extension
1
26
BF00006604
Packing lower
1
27
BF00001116
Compression spring
1
150 Sandvik mining exploration
Water swivel - Compact surface Item
Part No
Description
Qty
1-14
BB00000087
Compact water swivel - Surface
1
1
BB00000074
Swivel cap
1
2
BB00000076
O-ring
1
3
BB00000075
Spring washer
1
4
BB00000082
O-ring
1
5
BB00000077
Swivel packing
1
6
BB00000078
Packing cage
1
2
7
BB00000079
Upper swivel body
1
3
8
BB00000080
Wear sleeve
1
9
BB00000081
Ball bearing
1
10
BB00000085
Swivel body
1
11
BB00000084
Thrust bearing
1
12
BA00000134
Grease fitting
1
13
BB00000086
Felt seal
1
14
BB00000083
Spindle
1
1
4 5 6 7 8 9 10 11
Hose connection #16 NPT
12
AW rod box connection
13
For use with B, N and H systems as well as Sandvik’s 66 and 76 thin kerf systems.
14
Water swivel - Compact Surface and Underground Consumables 15 19 16 20 17 21
18 22
Item
Part No
Description
Qty
15-22
BB00000088
Consumables kit
-
15
BB00000075
Spring Washer
1
16
BB00000076
O-ring
1
17
BB00000077
Swivel packing
1
18
BB00000080
Wear sleeve
1
19
BB00000081
Bearing
1
20
BB00000082
O-ring
1
21
BB00000084
Bearing
1
22
BB00000086
Felt seal
1
151 Sandvik Mining Exploration
Water swivel - Compact underground 1
Item
Part No
Description
2
1-14
BB00000243
Compact water swivel - Underground
1
1
BB00000161
Swivel cap
1
2
BB00000076
O-ring
1
3
BB00000075
Spring washer
1
4
BB00000082
O-ring
1
5
BB00000077
Swivel packing
1
6
BB00000078
Packing cage
1
7
7
BB00000079
Upper swivel body
1
8
8
BB00000080
Wear sleeve
1
9
9
BB00000081
Ball bearing
1
10
BB00000085
Swivel body
1
11
BB00000084
Thrust bearing
1
12
BA00000134
Grease fitting
1
13
BB00000086
Felt seal
1
14
BB00000083
Spindle
1
3 4 5 6
10 11
Qty
12
Hose connection #16 NPT 13
AW rod box connection
14
For use with B, N and H systems as well as Sandvik’s 66 and 76 thin kerf systems.
Water swivel - Compact Surface and Underground Consumables 15 19 16 20 17 21
18 22
Item
Part No
Description
Qty
15-22
BB00000088
Consumables kit
-
15
BB00000075
Spring Washer
1
16
BB00000076
O-ring
1
17
BB00000077
Swivel packing
1
18
BB00000080
Wear sleeve
1
19
BB00000081
Bearing
1
20
BB00000082
O-ring
1
21
BB00000084
Bearing
1
22
BB00000086
Felt seal
1
152 Sandvik Mining Exploration
Item
Part No
Description
Qty
1-12
BF00000509
High Speed Water Swivel (42mm rod pin)
1
1-12
BF00005506
High Speed Water Swivel (AW rod box)
1
1
BF00000505
Seal housing
1
2
BF00001183
Spring
1
3
BF00001170
Grease nipple (not showing)
1
4
BF00001105
O-ring
1
4
5
BF00001078
Tension pin
2
5
6
BF00000501
Seal
1
6
7
BF00000504
Housing
1
8
BF00001125
Ball bearing
3
9
BF0000050
Shaft
1
10
BF00001096
Set screw
1
11
BF00001106
O-ring
1
12
BF00000512
Adapter (42 rod pin)
1
12
BF00005504
Adapter (AW rod box)
1
13
1
2 3
7 8
9 10
BF00000509 is for use with Sandvik’s thin kerf systems and BF00005506 for B and N systems 11 12
Water swivel - High speed - Options
14
15
16
Item
Part No
Description
Qty
13
BF00001113
Hose coupling 3/8" x 3/4"
1
Water swivel - High speed Consumables Item
Part No
Description
Qty
14-17
BF00005566
Consumables kit
-
14
BF00001183
Spring
1
15
BF00001106
O-ring
1
16
BF00000501
Seal
1
17
BF00001105
O-ring
1
14
Hoisting plug - 16T / 25T
1
2
Item
Part No
Description
Qty
1
BF00008419
Hoisting plug 16T
1
2
BF00008425
Hoisting Plug 25T
1
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options.
MINING.SANDVIK.COM
153 Sandvik Mining Exploration
TS1-043:01/ENG 02/2016 © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
Water swivel - High speed
CORE DRILLING TOOLS CONVENTIONAL CORE BARREL - 4C WITH INTEGRATED PUMP-OUT SYSTEM FOR EASY CORE RETRIEVAL
Sandvik’s conventional core barrels are precision instruments designed with exceptional sample recovery capabilities even under the most adverse conditions. They play an important role when it comes to decision making in areas such as foundation design for dam sites, bridges and buildings, or the development of mineral resources such as coal, iron ore or diamonds where bulk sampling has been required. Contact your Sandvik representative today.
Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
SPECIFICATIONS Ø
mm
in
Bit
138.89
5,468
Hole
139.70
5,500
Core
101.60
4,000
154 Sandvik Mining Exploration
4C CONVENTIONAL CORE BARREL Item 1
2
Description
1-10
CV-4C-3015
4C core barrel assembly 1.5 m (5 ft)
1-10
CV-4C-3030
4C core barrel assembly 3.0 m (10 ft)
1-10
CV-4C-3045
4C core barrel assembly 4.5 m (15 ft)
1-2
CV-4C-3200
Waterend and race housing assembly
4C INNER TUBE COMPONENTS
3
4
Part No
Item Part No
9
Description
Qty
1
CV-4C-4339
Waterend assembly
1
2
CV-4C-1600
Race housing assembly
1
3
BA00000759
Blow out valve assembly
1
4
CV-4C-4215
Split tube 1.5 m (5 ft)
1
4
CV-4C-4230
Split tube 3.0 m (10 ft)
1
4
CV-4C-4245
Split tube 4.5 m (15 ft)
1
5
CV-4C-4015
Holding tube assembly 1.5 m (5 ft)
1
5
CV-4C-4030
Holding tube assembly 3.0 m (10 ft)
1
5
CV-4C-4045
Holding tube assembly 4.5 m (15 ft)
1
6
CV-4C-4322
Locating washer
1
7
BA00000672
Core lifter
1
8
CV-4C-4313
Core lifter case
1
4C OUTER TUBE COMPONENTS
5
Item Part No
Description
Qty
9
Outer tube 1.5 m (5 ft)
1
CV-4C-4115
9
CV-4C-4130
Outer tube 3 m (10 ft)
1
9
CV-4C-4145
Outer tube 4.5 m (15 ft)
1
10
4CTP
Thread protector
1
9
6 7
10
8
CORING AFTERMARKET
155 Sandvik Mining Exploration
WATEREND ASSEMBLY Item
Part No
Description
Qty
1-2
CV-4C-4339
Waterend assembly
1
1
1125-1
Waterend body
1
2
CV-4C-4340
Plug 7/8" UNF
1
NW thread rod box connection. 1 2
3 4
RACE HOUSING ASSEMBLY Item
Part No
Description
Qty
3-11
CV-4C-1600
Race housing assembly
1
3
CV-4C-4325
Race housing body
1
4
1126-4
Body seal
1
5
CV-4C-4334
Spacer washer 1/16"
1
6
CV-4C-4337
Thrust race bearing
1
7
BA00000621
Set screw 1/4’’ UNF
1
8
CV-4C-4333
Radial ball bearing
1
9
CV-4C-4327
Race clamp
1
10
CV-4C-4323
Clamp seal
1
11
CV-4C-4332
Spindle
1
6 7
OPTIONS TO STANDARD CONFIGURATION 8 5
Item
Part No
Description
5
CV-4C-4335
Spacer washer 1/8"
1
9
BLOW OUT VALVE ASSEMBLY Item 11
10
13
14
15
16
17 12
18
19
Description
Qty
12-20 BA00000759
Part No
Blow out valve assembly
1
12
CV-4C-4303
Lurene "U" packing
2
13
BA00000693
Hex screw
1 1
14
BA000000670
Poppet head
15
BA00000648
Assembly screw
1
16
CV-NH4-4301
Compression spring
1
17
BA00000646
Top valve body
1
18
BA00000647
Center valve body
1
19
BA00000649
Bottom valve body
1
20
BA00000683
Strainer
1
20
156 Sandvik Mining Exploration
CORING AFTERMARKET
1
2
3
4
5 6 7
Item Part No
Description
Qty
-
Consumables Kit
1
BF00008305
1
CV-4C-4322
Locating washer
1
2
BA00000672
Core lifter
1
3
CV-4C-4313
Core lifter case
1
4
CV-4C-4337
Thrust race bearing
1
5
CV-4C-4333
Radial ball bearing
1
6
CV-4C-4340
Plug 7/8" UNF
1
7
CV-4C-4334
Spacer washer 1/16"
3
8
CV-4C-4303
Lurene "U" packing
2
9
CV-NH4-4301
Compression spring
1
10
BA00000683
Strainer
1
11
1128-5
Blow out valve loader
1
-
CV-4C-4323
Clamp seal
1
-
1126-4
Body seal
1
To ensure you have the consumable parts available when you need them, Sandvik has developed a consumables kit for our wireline core barrels based on the average usage for 1000 m of drilling.
8
9
12
ASSEMBLY KIT Item Part No
Description
Qty
10
-
Assembly Kit
1
11
1128-5
Blow out valve loader
1
11
12
CV-4C-4324
Pump coupling
1
CV-4C-1000
13
CV-4C-4314
C spanner
1
14
488-4
Allen key 5/16’’ (for plug 7/8’’ UNF)
1
15
490-9
Allen key 1/8’’ (for set screw)
1
16
NP-MIS-0008
Grease nipple 1/4’’ UNF(race housing)
1
14
15
13
16
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options.
MINING.SANDVIK.COM
157 Sandvik Mining Exploration
MKT0113:2 - 01/2015 / ENG © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
CONSUMABLES KIT
CORE DRILLING TOOLS CONVENTIONAL CORE BARREL - 8C WITH INTEGRATED PUMP-OUT SYSTEM FOR EASY CORE RETRIEVAL
Sandvik’s conventional core barrels are precision instruments designed with exceptional sample recovery capabilities even under the most adverse conditions. They play an important role when it comes to decision making in areas such as foundation design for dam sites, bridges and buildings, or the development of mineral resources such as coal, iron ore or diamonds where bulk sampling has been required. Contact your Sandvik representative today.
Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
SPECIFICATIONS Ø
mm
in
Bit
259.10
10,200
Hole
260.35
10,250
Core
202.70
7,980
158 Sandvik Mining Exploration
8C CONVENTIONAL CORE BARREL Item 1
2
Part No
Description
1-10
CV-8C-3015
8C core barrel assembly 1.5 m (5 ft)
1-10
CV-8C-3030
8C core barrel assembly 3.0 m (10 ft)
1-10
CV-8C-3045
8C core barrel assembly 4.5 m (15 ft)
8C INNER TUBE COMPONENTS
3
9
4
Item Part No
Description
Qty
1
Waterend assembly
1
CV-8C-4339
2
CV-8C-1600
Race housing assembly
1
3
CV-8C-4215
Split tube 1.5 m (5 ft)
1
3
CV-8C-4230
Split tube 3 m (10 ft)
1
3
CV-8C-4245
Split tube 4.5 m (15 ft)
1
4
CV-8C-1810
Blow out valve assembly
1
5
CV-8C-4015
Holding tube assembly 1.5 m (5 ft)
1
5
CV-8C-4030
Holding tube assembly 3 m (10 ft)
1
5
CV-8C-4045
Holding tube assembly 4.5 m (15 ft)
1
6
CV-8C-4322
Locating washer
1
7
CV-8C-4316
Core lifter
1
8
CV-8C-4317
Core lifter case
1
8C OUTER TUBE COMPONENTS Item Part No
Description
Qty
9
CV-8C-4115
Outer tube 1.5 m (5 ft)
1
9
CV-8C-4130
Outer tube 3 m (10 ft)
1
9
CV-8C-4145
Outer tube 4.5 m (15 ft)
1
10
BA00000804
Thread protector
1
5
6 7 10 8
CORING AFTERMARKET
159 Sandvik Mining Exploration
WATEREND ASSEMBLY Item
11
Part No
Description
Qty
11-13 CV-8C-4339
Waterend assembly
1
11
CV-8C-4338
Waterend body with grease niple
1
13
CV-8C-4340
Plug 3/4" BSP
1
4-1/2” API thread rod box connection
RACE HOUSING ASSEMBLY 13 18 20 15 17 23
19
Item
Part No
14-24 CV-8C-1600
Description
Qty
Race housing assembly
1
14
CV-8C-4325
Race housing body
1
15
CV-8C-4326
Circlip
1
16
CV-8C-4327
Race clamp
1
17
CV-8C-4328
Oil seal
2
16 22
18
CV-8C-4329
O-Ring
1
19
CV-8C-4330
Plug 1/8" BSP
1
24
20
CV-8C-4332
Spindle
1
21 14
21
CV-8C-4334
Spacer washer 1/16"
3
22
CV-8C-4333
Radial ball bearing
1
23
CV-8C-4337
Thrust race bearing
1
24
CV-8C-4321
Hanger thrust bearing
1
OPTIONS TO STANDARD CONFIGURATION
28 32
Item
Part No
Description
21
CV-8C-4335
Spacer washer 1/8"
21
CV-8C-4336
Spacer washer 3/32"
BLOW OUT VALVE ASSEMBLY Item
30
26
27
33 34
29
31
25
Description
Qty
25-34 CV-8C-1810
Part No
Blow out valve assembly
1
25
CV-8C-4301
Bottom valve body
1
26
CV-8C-4302
Centre valve body
1
27
CV-8C-4303
Lurene "U" packing
2
28
CV-8C-4304
Top valve body
1
29
BA00000793
Strainer
1
30
CV-8C-4312
M10 cap screws
6
31
BA00000132
Stainless steel ball
1
32
CV-6C8C-4301
Spring
1
33
CV-6C8C-4303
Spring retainer
1
34
CV-6C8C-4300
Ball seat
1
160 Sandvik Mining Exploration
CORING AFTERMARKET
6 7
8
18
Item Part No
Description
Qty
-
Consumables kit
1
BF00008119
6
CV-8C-4322
Locating washer
1
7
CV-8C-4316
Core lifter
1
8
CV-8C-4317
Core lifter case
1
18
CV-8C-4329
O-ring
2
15
CV-8C-4326
Circlip
1
23
CV-8C-4337
Thrust race bearing
1
22
CV-8C-4333
Radial ball bearing
1
19
CV-8C-4330
Plug 1/8" BSP
1
17
CV-8C-4328
Oil seal
2
15
21
CV-8C-4334
Spacer washer 1/16"
3
27
CV-8C-4303
Lurene "U" packing
2
23
32
CV-6C8C-4301
Spring
1
31
BA00000132
Stainless steel ball
1
22 19
29
BA00000793
Strainer
1
35
CV-8C-4306
Blow out valve loader
1
13
CV-8C-4340
Plug 3/4" BSP
1
17 21 27
To ensure you have the consumable parts available when you need them, Sandvik has developed a consumables kit for our wireline core barrels based on the average usage for 1000 m of drilling.
32 31 29 35
13
ASSEMBLY KIT Item Part No
Description
Qty
-
Assembly kit
1
CV-8C-1000
35
CV-8C-4306
Blow out valve loader
1
36
CV-8C-4324
Pump coupling
1
37
BF00008118
Allen key 1/2"
1
38
CV-8C-4320
8C grease nipple
1
39
CV-8C-4314
C spanner
1
36 37
39 38
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options.
MINING.SANDVIK.COM
161 Sandvik Mining Exploration
MKT0113:2 - 01/2015 / ENG © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
CONSUMABLES KIT
EXPLORATION CORING TOOLS WEDGE PLUG ASSEMBLY
WEDGE PLUG ASSEMBLY B WEDGE PLUG ASSEMBLY Item Part No
1
5
6
Description
Qty
BA00000461
Wedge Plug Assembly
1
1
BA00000484
Threaded Rod
1
2
BA00000482
Nut
1
3
BA00000480
Tapered Plug
1
4
BA00000489
Steel Plug
1
5
BA00000491
Spring Pin 1/4"x 2-1/2
1
6
BA00000487
Spring Pin 3/16"x 1-1/2
1
N WEDGE PLUG ASSEMBLY Item Part No
2
Description
Qty
BA00000462
Wedge Plug Assembly
1
1
BA00000485
Threaded Rod
1
2
BA00000483
Nut
1
3
BA00000481
Tapered Plug
1
4
BA00000488
Steel Plug
1
5
BA00000491
Spring Pin 1/4"x 2-1/2
1
6
BA00000487
Spring Pin 3/16"x 1-1/2
1
H WEDGE PLUG ASSEMBLY Item Part No
3
Description
Qty
BB00000200
Wedge Plug Assembly
1
1
BA00000485
Threaded Rod
1
2
BA00000483
Nut
1
3
BB00000202
Tapered Plug
1
4
BA00000503
Steel Plug
1
5
BA00000491
Spring Pin 1/4"x 2-1/2
1
6
BA00000487
Spring Pin 3/16"x 1-1/2
1
4
P WEDGE PLUG ASSEMBLY Item Part No
Description
Qty
BF00009011
Wedge Plug Assembly
1
1
BA00000485
Threaded Rod
1
2
BA00000483
Nut
1
3
BA00009015
Tapered Plug
1
4
BA00009016
Steel Plug
1
5
BA00000491
Spring Pin 1/4"x 2-1/2
1
6
BA00000487
Spring Pin 3/16"x 1-1/2
1
Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers.
162 Sandvik Mining Exploration
DEFLECTOR WEDGE B DEFLECTOR WEDGE
1
2
Item Part No
Description
Qty
1
BA00000498
Deflector Wedge
1
2
BA00000497
Wedge Dropper
1
3
BB00000196
B W/L Adapter
1
4
BA00000461
Wedge Plug Assembly
1
5
BA00000499
Steel Plug Basket
1
6
BA00000468
Wooden Wedge
1
7
BA00000463
Copper Shear Pin (Not Shown)
1
Item Part No
Description
Qty
1
BA00000500
Deflector Wedge
1
2
BA00000501
Wedge Dropper
1
3
BB00000197
N W/L Adapter
1
4
BA00000462
Wedge Plug Assembly
1
5
BA00000502
Steel Plug Basket
1
6
BA00000469
Wooden Wedge
1
7
BA00000463
Copper Shear Pin (Not Shown)
1
3
H DEFLECTOR WEDGE
4
Item Part No
Description
Qty
1
BF00009009
Deflector Wedge
1
2
BA00000501
Wedge Dropper
1
3
BB00000199
H W/L Adapter
1
4
BB00000200
Wedge Plug Assembly
1
5
BB00000201
Steel Plug Basket
1
6
BB00000198
Wooden Wedge
1
7
BA00000463
Copper Shear Pin (Not Shown)
1
P DEFLECTOR WEDGE 5 6
Item Part No
Description
Qty
1
BF00009004
Deflector Wedge
1
2
BA00000501
Wedge Dropper
1
3
BF00009012
P W/L Adapter
1
4
BF00009011
Wedge Plug Assembly
1
5
BG00486337
Steel Plug Basket
1
6
BG00486339
Wooden Wedge
1
7
BA00000463
Copper Shear Pin (Not Shown)
1
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options.
MINING.SANDVIK.COM
163 Sandvik Mining Exploration
TS1-026:01/ENG © Sandvik Mining 2015 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
N DEFLECTOR WEDGE
Wireline Drill Rods Misconception
A drill rod is just a piece of steel
Fact : A drill rod is made up of a Highly engineered thread and should be handled accordantly in order to get the maximum performance and $$ value
164 Sandvik Mining Exploration
Wireline Drill Rods
Identification
All Sandvik rod are identified for traceability on the pin end . -ie G3708
165 Sandvik Mining Exploration
Field Usage Care and Handling
Protecting your investment
166 Sandvik Mining Exploration
Field Usage Care and Handling
Some common Practises that should take place in the field to increase your Profitability
#1 Inspection of shipment
167 Sandvik Mining Exploration
Field Usage Care and Handling
Check inner diameter box/pin threads for debris.
Lubricate threads. NOTE: do not remove Sandvik proprietary thread compound
#2 Properly Preparing drill rods for use.
168 Sandvik Mining Exploration
Field Usage Care and Handling
Store your Sandvik drill rods properly so they are of the ground slightly, flat and the ends are protected from damage
#3 Proper handling to avoid thread damage
169 Sandvik Mining Exploration
Field Usage Care and Handling
Avoid dragging or dropping the rods ,especially the exposed pin end
#3 Proper handling to avoid thread damage
170 Sandvik Mining Exploration
Field Usage Care and Handling
Avoid cross threading
#3 Proper handling to avoid thread damage
171 Sandvik Mining Exploration
Field Usage Care and Handling
Avoid stabbing the joint during make-up
#3 Proper handling to avoid thread damage
172 Sandvik Mining Exploration
Field Usage Care and Handling
Avoid stabbing the joint during make-up
#4
DO NOTE mix drill rod and adapter subs from
Insuring compatibility
different suppliers It will VOID WARRANTY
173 Sandvik Mining Exploration
Field Usage Care and Handling
“GALLING”
When these simple practices are not part of the daily routine the result is galling.
“ Snow ball effect” It starts off small but , in the end it becomes to large to manage
174 Sandvik Mining Exploration
Field Usage Drilling Practices
Preloading the joint Applied make-up torque is required to cause tress to the joint equal to 60% material yield strength Basic rule for loading the joint The torque applied by the drill should be less than the rod minimum make-up torque , if this is not the case there is risk of down the hole make-up of the tool joints leading to connection damage and failure.
175 Sandvik Mining Exploration
Field Usage Drilling Practices
Ensure correct minimum recommend pretorque is applied to the rod joint Proper pretorque locks the joint Prevents spin-off ( unthreading in the hole ) Ensures a proper seal to Prevent leaks Recommended minimum make-up Torque N Size rod = 450 ft-lbs (610 Nm ) B Size rod = 300 ft-lbs ( 407 Nm ) Over torqueing can cause the box end to expand-belling/bulging
176 Sandvik Mining Exploration
Field Usage Drilling Practices
DO NOT
make or break with chuck jaws engaged of the joint. it can cause a stress point where cracks can occur
177 Sandvik Mining Exploration
Field Usage Drilling Practices
Abrasive wear causing premature failure Centre the rod string over the hole to ensure unnecessary wear does not occur . Deviated holes can cause excess wear
API Drill Pipe Classes: Class 1 Premium class Class 2
178 Sandvik Mining Exploration
Field Usage End Results
Drill rods are an expensive investment Proper care and handling will help maximize product life and reduce your drilling cost. Mis-used cause premature wear / failure and lost time with in-hole problems/fishing and lead to unsafe practices . Wouldn’t you want to do another sort of fishing with your increased bonus by staying in the hole drilling .
179 Sandvik Mining Exploration