Loading documents preview...
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
5.1 Axial Flow Fans Contents
Novax Axial Flow Fans ACA - ACN ACW - ACD - ACG - ACP . . . . . . . . . . 3
Accessories – ACA – Mounting foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
One Rotor – Several Fan Types . . . . . . . . . . . 3 ACA – ACN – ACW – ACD . . . . . . . . . . . . . . . 3 ACG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ACP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Two types of blades . . . . . . . . . . . . . . . . . . . . . 3 Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Corrosion Classification . . . . . . . . . . . . . . . . . . 3 Adjustment of Blade Angles. . . . . . . . . . . . . . . 3
Accessories – ACN – Mounting foot, horizontal . . . . . . . . . . . . . . . . . . . . . . 23
Control of Speed by Means of Frequency Conversion . . . . . . . . . . . . . . . . . . . 4
Accessories – ACG and ACP – Mounting foot and diffuser . . . . . . . . . . . 24 Accessories – ACG and ACP – Mounting foot and diffuser . . . . . . . . . . . . 25 Accessories – ACA, ACN, ACG and ACP . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Type Descriptions of ACA-ACD . . . . 5 ACA – ACD for Installation in Ducting . . . . . . . 5 Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Accessories – ACA, ACN, ACG and ACP . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Type Descriptions of ACN-ACW . . . . 6
Accessories – ACD, ACW . . . . . . . . . 28
ACN – ACW for Installation in Ducting. . . . . . . 6 Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Type Descriptions of ACG and ACP . . . . . . . . 7
Accessories – ACD, ACW . . . . . . . . . 29
Novax – Combination key – type ACA – ACD . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Accessories – ACD, ACW . . . . . . . . . 31
Accessories – ACD, ACW . . . . . . . . . 30
Acoustic diffuser - YAD. . . . . . . . . . . 33 Novax – Combination key – type ACN – ACW . . . . . . . . . . . . . . . . . . . . . . . . . 8 Novax – Combination key – types ACG and ACP . . . . . . . . . . . . . . . . . . . . . . . 9 Performance Curves. . . . . . . . . . . . . 10 ACA – ACD 60 Hz . . . . . . . . . . . . . . . . . . . . . 10 ACN – ACW 60 Hz. . . . . . . . . . . . . . . . . . . . . 11 ACG 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ACP 60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Dimension Sketches. . . . . . . . . . . . . 14 ACA – Dimension sketches . . . . . . . . . . . . . . 14 ACD – Dimension sketches . . . . . . . . . . . . . . 16 ACD – Dimension sketches . . . . . . . . . . . . . . 17 ACN – Dimension sketches . . . . . . . . . . . . . . 18 ACG and ACP – Dimension sketches . . . . . . 19 ACW – Dimension sketches . . . . . . . . . . . . . 20 ACW – Dimension sketches . . . . . . . . . . . . . 21
Accessories . . . . . . . . . . . . . . . . . . . 22
Sound conditions. . . . . . . . . . . . . . . . 33 Technical Data for Accessories . . . . 34 Installation corrections . . . . . . . . . . . 36 Run up time of axial flow fans . . . . . 37 Smoke Extract Fans. . . . . . . . . . . . . . 38 Pump Room Fan type HGP . . . . . . . . 39 Product and Application 39 Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Number of Hub Diameters . . . . . . . . . . . . . . .39 Number of Blades . . . . . . . . . . . . . . . . . . . . .39 Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Materials and Surface Treatment . . . . . . . . . . . . . . . . . . . . . . 39 Corrosion Classification . . . . . . . . . . . . . . . . .39 Duct on inlet and free outlet . . . . . . . . . . . . . .39 Description . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice MU 13073 0205
5.1 Axial Flow Fans
Page 1 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax HGP Dimensions. . . . . . . . . . 41 Novax axial flow fan type HGP . . . . 42 Novax axial flow fan type HGP . . . . 43 Novax axial flow fan type HGP . . . . 44 Novax axial flow fan type HGP . . . . 45 Novax axial flow fan type HGP . . . . 46 Novax axial flow fan type HGP . . . . 47 Novax axial flow fan type HGP . . . . 48 Novax axial flow fan type HGP . . . . 49 Novax axial flow fan type HGP . . . . 50 Novax axial flow fan type HGP . . . . 51 Novax axial flow fan type HGP . . . . 52 Novax axial flow fan type HGP . . . . 53 Novax axial flow fan type HGP . . . . 54 Novax axial flow fan type HGP . . . . 55 Axial Flow Fan type HGC . . . . . . . . . 56 Product and Application 56 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Materials and Surface Treatment. . . . . . . . . . 56 Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Performance Curves HGC-250/160 57
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 2 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax Axial Flow Fans ACA ACN - ACW - ACD - ACG - ACP
ACP For wall mounting with direct inlet and outlet.
The Novax fans are compact and robust, massproduced adjustable pitch axial flow fans. Novax is suited for a large number of air handling applications for marine installations. Distinguishing features of Novax are space economy, easy installation and high reliability.
Two types of blades
The rotors are available with blades of glass fibre reinforced polyester (GRP) or aluminium. N.B. However, rotors with hub diameters = 403 and = 578 mm are only available with blades of aluminium. The two blade types have identical performance characteristics. In the temperature range of -20 °C to +40 °C the fans are normally equipped with GRP blades which are lighter and more resistant to corrosion. In the temperature range of -20 °C to -40 °C and +40 °C to +70 °C both blade types can be used, however, at reduced speeds and with special grease in motors. In the temperature range of 70 °C to 100 °C solely aluminium blades are used and at reduced speeds.
One Rotor – Several Fan Types
The Novax rotor (the impeller) consists of two assembled hub discs with cavities to house the blades. The rotor is provided with a hub boss for mounting onto a motor shaft.
Motors
The motors are asynchronous motors. Types ACN, ACG, ACW and ACP have flanged motors, whereas type ACA and ACD has a foot-mounted motor.
The blades of the rotor can be factory adjusted to any angle between 25 and 70 °, dependent on size and speed. The rotor and motor assembly can be mounted in many different fan casing profiles suitable for a
Corrosion Classification The Novax fans are as standard designed for operation in unheated, low-corrosive environments according to the international standard EN ISO
variety of applications.
12944-2, class 2 (low).
ACA – ACN – ACW – ACD
Adjustment of Blade Angles
For installation in ducting.
The blade pitch may be adjusted to obtain different performances. In that case the motor output should be known and the rotor carefully aligned
ACG For duct connection with direct inlet.
and balanced before starting. Please contact YORK Novenco before any such adjustment.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 3 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Control of Speed by Means of Frequency Conversion The performance curves on pages 10 – 13 show the nominal speeds for motors of 50 and 60 Hz and with speed control by frequency conversion with the maximum speeds indicated in the table below. Thus Novax fans are a serious alternative to cenThe brochure “Blade angle tool for adjustment of blade angle” is available on request.
accurate selection of type and size in view of air pressure,
operating
and air conditioning systems with varying air quantity requirements.
The Novax computer calculation program ensures quantity,
trifugal fans with inlet vane control in ventilating
economy
and
sound. The program can be ordered on diskettes.
Both investment, operating costs as well as space requirements are smaller for Novax fans with the same performance. This is mainly due to falling prices of frequency converters, so even small installations can be economically speed controlled by means of frequency conversion.
Max. speed of Novax rotors at 20°C * Rotor diameter
Hub diameter
250
315
400
500
160
3865
3865
3865
3865
4000
560
630
710
800
4000
3865
3575
3275
2980
280
4012
3755
3536
3230
2930
2571
330
3977
3686
3448
3215
2973
2660
3674
3397
3097
2859
2651
2324
403
2179
578
2128
230
380
900
1000
1120
1250
1400 1600
2025
1885
1730
1575
1957
1804
1685
1595
* Reduced max. speed at higher or lower temperature.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 4 of 58
5.1 Axial Flow Fans
1410
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Type Descriptions of ACA-ACD ACD
ACA
ACA – ACD for Installation in Ducting
The series comprises 14 sizes with impeller diameters ranging from 250 to 1600 mm and 7 hub diameters from 160 to 578 mm.
The fan casing incl. of motor suspension is hot-dip galvanized. The fan casing is provided with an inspection door. The rotor unit is mounted directly on the motor shaft end.
Capacities
Air quantities from 0.1 to 55 m 3 /s and total pressures up to 1800 Pa. ACA casing consists of a short rolled welded steel tube with beaded flanges. ACD consists of a cylindrical casing with connecting flanges at both ends. The fan casing has a welded motor suspension of sheet steel.
The direction of air flow for ACA is blade – motor. The motor is a foot-mounted motor mounted on the outlet side and provided with electric cable extended through the fan casing to a terminal box for electrical connection. Pitch circle diameter of flange, number of holes and hole size as standard according to EUROVENT 1/2 for type ACA and according to DIN 24154 for ACD.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 5 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Type Descriptions of ACN-ACW ACN
ACW
ACN – ACW for Installation in Ducting
The series comprises 14 sizes with impeller diameters ranging from 250 to 1600 mm and 7 hub diameters from 160 to 578 mm.
The fan incl. of motor suspension is hot-dip galvanized. The direction of air flow for ACN and ACW is blade – motor. The motor is a flanged motor mounted on the outlet side and provided with an electric cable extended through the fan casing to a terminal
Capacities
Air quantities from 0.1 to 55 m3/s and total pres-
box for electrical connection.
sures up to 2000 Pa.
The fan casing is provided with an inspection
The fan consists of a cylindrical casing with con-
door.
necting flanges at both ends.
Pitch circle diameter of flange, number of holes
The fan casing has a welded motor suspension of
and hole size as standard according to EURO-
sheet steel which at the same time serves as a
VENT 1/2 for type ACN and according to DIN
down-stream guide vane arrangement, ensuring
24154 for ACW.
an extremely high efficiency. The rotor unit is mounted directly on the motor shaft end.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 6 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Type Descriptions of ACG and ACP
Capacities Air quantities from 0.1 to 55 m3/s and total pressures up to 2000 Pa. The fan consists of a tubular casing with a bell mouth inlet for direct air intake and an outlet flange for duct connection. The rotor unit is mounted at the inlet with the motor facing the air intake. The direction of air flow for ACG is motor – blade. The inlet is provided with a wire guard. On the outlet side of the rotor a downstream guide vane arrangement with a core is mounted ensuring a very high efficiency.
ACG for Duct Connection The series comprises 14 sizes with impeller diameters ranging from 250 to 1600 mm and 7 hub diameters from 160 to 578 mm.
The motor is a flanged motor with electrical connection in the terminal box. Pitch circle diameter of flange, number of holes and hole size as standard according to EUROVENT 1/2.
Capacities Air quantities from 0.1 to 50 m3/s and total pressures up to 1600 Pa. The fan consists of a short tubular casing with a bell mouth inlet for direct air intake and an outlet flange for duct connection. The rotor unit is mounted at the inlet with the motor facing the air intake. The direction of air flow for ACP is motor – blade. The inlet is provided with a wire guard. ACP is used for direct exhaust through wall. ACP for Wall Mounting
The motor is a flanged motor with electrical con-
The series comprises 14 sizes with impeller diam-
nection in the terminal box.
eters ranging from 250 to 1600 mm and 7 hub di-
Pitch circle diameter of flange, number of holes
ameters from 160 to 578 mm.
and hole size as standard according to EUROVENT 1/2.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 7 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax – Combination key – type ACA – ACD Hub diam. 160
230
280
330
380
403
578
Motor size (foot-mounted)
250
315
400
500
•
• •
• • • • • • •
• • • • • • • • • • • • • • • • •
71 80 90 71 80 90 100 71 80 90 100 112 80 90 100 112 132 90 100 112 132 160 180 112 132 160 180 132 160 180 200 225 250 280
560
630
• • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • •
Rotor diameter 710 800 900
• • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • •
1000
• • • • • • • • • • • • • •
1120
1250
• • • • • • • • •
• • • • • • • • • •
1400
1600
• • • • • • • • •
• • • •
1400
1600
Novax – Combination key – type ACN – ACW Hub diam. 160
230
280
330
380
403
578
Motor size (spec.motor) 71 80 90 71 80 90 100 71 80 90 100 112 80 90 100 112 132 90 100 112 132 160 180 112 132 160 180 132 160 180 200 225 250 280
250
315
400
500
•
• •
• • • • • • •
• • • • • • • • • • • • • • • • •
560
630
• • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • •
Rotor diameter 710 800 900
• • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • •
1000
• • • • • • • • • • • • •
1120
1250
• • • • • • • • •
• • • • • • • • • •
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 8 of 58
5.1 Axial Flow Fans
• • • • • • • • •
• • • •
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax – Combination key – types ACG and ACP Hub diam.
Motor size (flanged) 71 80 90 100 71 80 90 100 71 80 90 100 112 80 90 100 112 132 90 100 112 132 160 180 112 132 160 180 132 160 180 200 225 250
160
230
280
330
380
403
578
250
315
400
500
• •
• • •
• • • • • • • •
• • • • • • • • • • • • • • • • • •
560
630
• • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • •
Rotor diameter 710 800 900
• • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • •
1000
1120
• • • • • • • • • • • • • •
• • • • • • • • •
1250
1400
• • •
• •
• • • •
• • • •
1600
• • •
Accessories Horizontal mounting foot Vertical mounting plate Inlet cone with wire guard Counter flange Duct spigot Welding connection Flexible connection Silencer with or without pad Acoustic diffuser with pad Hood Damper Wire guard in casing (pressure side)
ACA – ACD
ACN – ACW
ACG
ACP
• • •
• • •
• •
• •
• • • • YAH – YAA YAD HAN – HAT SBC – SBA
• • • • YAH – YAA YAD HAN – HAT SBC – SBA
• • • • YAH YAD
• • • • YAH YAD
SBC •
SBC •
• 2 • •
• 2 • • •
•
1
Wire guard flange (pressure side)
• •
Brass lining
•
•
Anti-vibration mountings Diffuser for outlet
• •
• •
1
Downstream guide vane arrangement 3 1. 2. 3.
Mounting a wire guard on the ACA, ACN or ACW requires an extra long casing due to the motor size. Brass lining is unavailable for some motor variants. ACP + downstream guide vane arrangement = ACG
For assembly of 2 silencers type YAH use a standard clamping ring. Do not assemble more than 2 silencers by means of a standard clamping ring.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 9 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Performance Curves
Total pressure, Pa
ACA – ACD 60 Hz 2000 1500 1000 r o to em l o 2-p
500
r o to em l o r 4-p oto le m o r p 6o to le m o p 8-
200 100 50
20 10 5
2 1 0.1
0.2
0.5
1
2
5
10
20
50
100 3
Air flow, q, m/s
The above curves show the duty ranges of the fan
Final selection of fan size, including calculation of
type irrespective the sizes and hub diameter.
blade pitch, power consumption, motor selection and sound level, is done by means of the Novax
The fan performance are according to BS 848 1980,
computer selection program; which is available
arrangement D (duct connection for inlet and out-
on CD-ROM or www.york-novenco.com.
let). If other arrangements are used, performance characteristics will vary.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 10 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Total pressure, Pa
ACN – ACW 60 Hz 2000 1500 m 2-po le
1000 500
o to r
tor le mo 4 -po r mo to 6-po le r t mo o 8-po le
200 100 50
20 10 5
2 1
0.1
0.2
0.5
1
2
5
10
20
50
100 3
Air flow, q, m/s
The above curves show the duty ranges of the fan
Final selection of fan size, including calculation of
type irrespective the sizes and hub diameter.
blade pitch, power consumption, motor selection and sound level, is done by means of the Novax
The fan performance are according to BS 848 1980,
computer selection program; which is available
arrangement D (duct connection for inlet and out-
on CD-ROM or www.york-novenco.com.
let). If other arrangements are used, performance characteristics will vary.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 11 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Total pressure, Pa
ACG 60 Hz 2000 1500 1000
le 2-po
r moto
500 4-p o
200
oto le m
le 6-po
r
r moto le m 8-po
100
otor
50
20 10 5
2 1 0.1
0.2
0.5
1
2
5
10
20
50
100 3
Air flow, q, m/s
The above curves show the duty ranges of the fan
Final selection of fan size, including calculation of
type irrespective the sizes and hub diameter.
blade pitch, power consumption, motor selection and sound level, is done by means of the Novax
The fan performance are according to BS 848 1980,
computer selection program; which is available
arrangement B (free inlet and ducted on outlet
on CD-ROM or www.york-novenco.com.
sides). If other arrangements are used, performance characteristics will vary.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 12 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Total pressure, Pa
ACP 60 Hz 2000 1500 1000
le 2-po
500
or mot otor le m 4-po otor le m 6-po
200
le 8-po
100
moto
r
50
20 10 5
2 1 0.1
0.2
0.5
1
2
5
10
20
50 100 3 Air flow, q, m/s
The above curves show the duty ranges of the fan
Final selection of fan size, including calculation of
type irrespective the sizes and hub diameter.
blade pitch, power consumption, motor selection and sound level, is done by means of the Novax
The fan performance are according to BS 848 1980,
computer selection program; which is available
arrangement A (free inlet and outlet sides). If
on CD-ROM or from www.york-novenco.com.
other arrangements are used, performance characteristics will vary.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 13 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Dimension Sketches ACA – Dimension sketches EUROVENT 1/2 L1
P x øR
øA øB øD øN
E
M
C
C L
250
315
400
Size (impeller diameter) 500 560 630 710
800
900
A
310
385
480
590
650
720
800
890
1000
B
280
355
450
560
620
690
770
860
970
D
250
315
400
500
560
630
710
800
900
4
8
8
12
12
12
16
16
16
R
10
10
12
12
12
12
12
12
15
C
3
3
3
3
3
3
3
3
4
1000 1100 1070 1000 16 15 4
E
200
200
200
200
182
182
182
182
315
315
315
315
12
14
17.6
21.6
187
187
187
315
315
315
14.2
17.6
21.6
193
193
200
Hub diam.
P
160-380
Casing length L1
300-500
Motor type
All
M L
-71
Weight,kg M L
160
300
-80
Weight,kg M L
-90
Weight,kg E M L Weight,kg M L
230-380 230-380 -71
230
230-380
280 330
M L
-80
22.5
200
200
200
200
200
200
200
207
207
207
207
207
207
207 340
340
340
340
340
340
340
19.5
23.8
26.3
32.4
35.8
39.4
25.3
27.8
34.0
37.5
41.2
57.8
212
212
212
212
212
212
212
340
340
340
340
340
340
340
19.4
23.8
26.3
32.2
35.7
39.4
25.3
27.8
33.8
37.4
41.2
57.7
26.8
29.7
35.9
39.6
43.5
60.0
218
218
218
218
218
218
218
375
375
375
375
375
375
375
20.1
24.6
27.3
32.4
36.4
40.2
26.1
28.8
34.0
38.1
42.0
59.1
27.6
30.7
36.1
40.3
44.3
61.4
32.3
38.2
42.5
46.6
63.9
300
300
300
300
300
300
230-380 230
Weight,kg
350
18.3
280
230 Weight,kg
350
-90
280 330 380
E M L
230-380 230-380
300 400
-100
300
225
225
225
225
225
225
225
400
400
400
400
400
400
400
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 14 of 58
5.1 Axial Flow Fans
218 375
62.4 300 225 400
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Hub diam. Weight,kg
M
Motor type
Casing length L1
230 280 330 380
250
315
Size (impeller diameter) 500 560 630 710
400 24.5
-100
280-380
L Weight,kg M L
280 330 380
-112
400
E M L Weight,kg M L Weight,kg
-132
330 380 380 380
C E M L Weight,kg M L
38.7 40.3 42.4 44.5
40.3 42.0 41.2 46.4
48.1 49.9 52.2 54.5
71.5 73.8 76.3
232
232
232
232
232
232
425 32.0 33.5
425 35.2 37.1 38.7 251 475 38.3 39.9 400 270 585 47.3
425 40.5 42.6 44.7 251 475 43.5 45.6 400 270 585 52.9 283 625 52.2
425 45.4 47.6 49.8 251 475 48.7 51.0 400 270 585 59.2 283 625 59.0
425 50.4 52.7 55.0 251 475 54.0 56.3 400 270 585 65.0 283 625 64.5
425 71.6 73.9 76.4 251 475 75.9 78.4 400 270 585 93.5 283 625 93.3
500 380
-180
Casing length L1
Motor type
403-578 All 403 578 403-578 403
-112
403 403-578
Weight,kg
403 578
M L
403-578
Weight,kg
403 578
M L
403-578
Weight,kg
403 578
E M L Weight,kg M L Weight,kg M L Weight,kg E M L Weight,kg
900
33.3 34.8 36.7 38.3
-160
Hub diam. ∅N A B D P R
800
30.1 31.6 33.0
251 475 34.8
330-380
Weight,kg
1.
Products
-132 500 -160
-180
1000
1000 970 900 16 15 4 4 375 295 500 101.2 314 545 103.3 119.7 333 655 107.0 123.4 346 1 695 1
1100 1070 1000 16 15 4 4 375 295 500 110 314 545 112.8 130.0 333 655 116.9 134.1 346 695 116.8 134.0 505 358 725 157.2
122.4
-200 578
900
630
-225
-250
578
710
Size (impeller diameter) 1120 1250 1400 1220 1190 1120 20 15 4 4 375 295 500 121.5 314 545 124.6 142.8 333 655 139.1 157.3 346 695 139.5 157.7 505 358 725 176 374 775 178.7
1360 1320 1250 20 15 6 6 375 295 500 173 314 545 176 195 333 655 193 212 346 695 194 213 505 358 725 241 374 775 245 393 850 247
-280
1510 1470 1400 20 15 6 6
1000
84.1 232 425
84.7 251 475 87.4 400 270 585 104.7 283 625 104.5
1600 1720 1680 1600 24 19 6
314 545 201.5 333 655 211.0 243.0 346 695 212.5 244.0 505 358 725 277 374 775 282 393 850 286 585 415 950 329
505 358 725 317 374 775 321 393 850 326 585 415 950 378
Only for hub diameters ∅578
Dimensions in mm – Weights in kg excl. motor Flanges: Pitch circle diameter, number of holes and hole size as standard according to EUROVENT 1/2.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 15 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
ACD – Dimension sketches
6 or 10 mm
DIN 24154 - Casing 6 or 10 mm
Hub Motor diam. ∅N type 250
315
400
500
409 / 407
494 / 492
594 / 592
Size (impeller diameter) 560 630 710
900
1000 1115 / 1113
B
292
366
448
551
629
698
775
861
958
1067
6
8/8
6 / 10
6 / 10
6 / 10
6 / 10
6 / 10
6 / 10
6 / 10
6 / 10
250
315
400
500
560
630
710
800
900
1000
276
314
415
455
520
520
520
520
727
777
L
360
400
520
560
620
620
730
750
850
900
P
8
8
12
12
16
16
16
24
24
24
R
12
12
12
12
14
14
14
14
14
14
M
182
182
182
182
207
207
207
207
207
160-380
-71
Weight M Weight
All
160
M
-80 -90
Weight M
230-380
Weight
230 280
M
230-380
Weight
230 280 330
M
230-380
Weight
230 280 330 380
21.5
29.9 / 42.1 44.6 / 64.7 57.7 / 84.8 187
187 193
207
46.4 / 66.5 59.8 / 86.9 74.0 / 107.5 85.7 / 123.4 107.8 / 158.0 122.5 / 180.4 61.3 / 88.4 75.5 / 109.0 87.3 / 125.0 109.5 / 159.7 124.3 / 182.2 155.7 / 229.6 46.3 / — — / 66.4 218
-90
193
45.2 / 65.3 58.6 / 85.7
212 -80
187
29.9 / 42.1 44.6 / 64.7 57.7 / 84.8
207 -71
824 / 822
1015 / 1012
C E
744 / 742
800
334
D
674 / 672
914 / 912
A
212
212
212
212
212
212
59.8 / 86.9 73.9 / 107.4 85.6 / 123.3 104.6 / 154.8 122.5 / 180.4 61.3 / 88.4 75.4 / 108.9 87.2 / 124.9 109.4 / 159.6 124.3 / 182.2 155.6 / 229.5 62.8 / 89.9 77.3 / 110.8 89.3 / 127.0 111.6 / 161.8 126.6 / 184.5 157.9 / 231.8 218
218
47.0 / 67.1 60.6 / 87.7 74.9 / 108.4 62.1 / 89.2 76.4 / 109.9 63.6 / 90.7 78.3 / 111.8 79.9 / 113.4
218
218
85.7 / 123.4 87.3 / 125.0 89.4 / 127.1 91.5 / 129.2
108.4 / 158.6 110.1 / 160.3 112.3 / 162.5 114.5 / 164.7
218
218
218
123.3 / 181.2 125.1 / 183.0 156.9 / 230.8 127.4 / 185.3 159.2 / 233.1 129.7 / 187.6 161.7 / 235.6 185.6 / 272.7
Dimensions in mm – Weights in kg excl. motor Flanges: Pitch circle diameter, number of holes and hole size as standard according to DIN 24154. Table cells with double entries state the value applying to 6 mm casings first followed by that for 10 mm casings. The values are separated by a slash – for example (6 / 10).
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 16 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
ACD – Dimension sketches Casing 6 and 10 mm Motor Hub diam. ∅N type M Weight M Weight M Weight M Weight M Weight
230-380 230 280 330 380 280-380 280 330 380 330-380 330 380 380 380
Weight M Weight M Weight M Weight M Weight M Weight M Weight
225 48.1 / 68.2
225 62.2 / 89.3 63.7 / 90.8 65.2 / 92.3
225 76.7 / 110.2 78.2 / 111.7 80.1 / 113.6 81.7 / 115.2 232 78.7 / 112.2 80.6 / 114.1 82.2 / 115.7 251 81.7 / 115.2 83.3 / 116.8 270 86.0 / 119.5
232 64.0 / 91.1 65.5 / 92.6 251 66.8 / 93.9
-132 -160 -180
All
403
-112
578
560
-112
403-578
403-578 403578 403-578 403578 403-578 403578
500
-100
Hub Motor diam. ∅N type A B C D E L P R M Weight M
400
-132
-160
900
1000
1015 / 1012 958 6 / 10 900 727 850 24 14 295 181.2 / 255.1 314 183.3 / 257.2 199.7 / 273.6 333 186.9 / 260.8 203.3 / 277.2 346
1115 / 1113 1067 6 / 10 1000 777 900 24 14 295 206.2 / 293.3 314 208.9 / 296.0 226.1 / 313.2 333 213.3 / 300.4 230.5 / 317.6 346 212.8 / 299.9 230.0 / 317.1 358 239.8 / 326.9
-180 202.3 / 276.2
Size (impeller diameter) 630 710 800 225 87.3 / 125.0 88.9 / 126.6 91.0 / 128.7 93.1 / 130.8 232 89.2 / 126.9 91.3 / 129.0 93.4 / 131.1 251 92.2 / 129.9 94.3 / 132.0 270 97.0 / 134.7 283 96.5 / 134.2
225 109.8 / 160.0 111.5 / 161.7 113.7 / 163.9 115.9 / 166.1 232 111.8 / 162.0 114.0 / 164.2 116.2 / 166.4 251 115.2 / 165.4 117.4 / 167.6 270 119.7 / 169.9 283 119.5 / 169.7
225 125.0 / 182.9 126.8 / 184.7 129.1 / 187.0 131.4 / 189.3 232 127.3 / 185.2 129.6 / 187.5 131.9 / 189.8 251 131.1 / 189.0 133.4 / 191.3 270 135.6 / 193.5 283 135.1 / 193.0
Size (impeller diameter) 1120 1250 1255 / 1263 1200 6 / 10 1120 777 950 32 18 295 256.5 / 361.9 314 259.6 / 364.9 277.8 / 383.1 333 274.0 / 379.3 292.2 / 397.5 346 274.4 / 379.7 292.6 / 397.9 358 295.9 / 401.2 374 298.9 / 404.2
1385 / 1393 1337 6 / 10 1250 777 1060 32 18 295 304.5 / 435.7 314 307.8 / 439.0 326.7 / 457.9 333 324.7 / 455.9 343.6 / 474.8 346 325.7 / 456.9 344.6 / 475.8 358 348.6 / 479.8 374 352.6 / 483.8 393 355.2 / 486.4
900
1000
225
225
159.9 / 233.8 162.2 / 236.1 164.7 / 238.6 232 160.0 / 233.9 162.3 / 236.2 164.8 / 236.2 251 164.2 / 238.1 166.7 / 238.1 270 172.7 / 246.6 283 173.2 / 247.1
189.3 / 276.4 232
189.9 / 277.0 251 192.5 / 279.6 270 199.3 / 286.4 283 199.2 / 286.3
1400
1600
1535 / 1543 1491 6 / 10 1400 777 1120 32 18
1745 / 1753 1663 6 / 10 1600 777 1120 40 18
314 364.8 / 519.9 333 374.2 / 529.3 405.9 / 561.0 346 375.6 / 530.7 407.3 / 562.4 358 412.6 / 567.7 374 417.0 / 572.1 393 421.1 / 576.2 415 446.6 / 601.7
358 487.7 / 664.8 374 493.8 / 670.9 393 499.3 / 676.4 415 531.1 / 708.2
Dimensions in mm – Weights in kg excl. motor Flanges: Pitch circle diameter, number of holes and hole size as standard according to DIN 24154. Table cells with double entries state the value applying to 6 mm casings first followed by that for 10 mm casings. The values are separated by a slash – for example (6 / 10).
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 17 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
P x øR
C
øA
øB
øN
øD
ACN – Dimension sketches EUROVENT 1/2
L
250
315
400
500
560
Size (impeller diameter) 630 710 800 900 1000 1120 1250
1400
1600
A
310
385
480
590
650
720
800
890
1000
1100
1220
1360
1510
1720
B
280
355
450
560
620
690
770
860
970
1070
1190
1320
1470
1680
250
315
400
500
560
630
710
800
900
1000
1120
1250
1400
1600
4
8
8
12
12
12
16
16
16
16
20
20
20
24
10
10
12
12
12
12
12
12
15
15
15
15
15
19
2
2
3
3
3
3
3
3
3
3&4
3&4
3&4
4
4
360
400
520
560
620
620
730
750
850
900
11
14
27
42
55
60
73
82
98
134 650
750
-132
850
750
650
750
850
-160
850
750
750
750
850
900
850
850
850
154
167
184
202
750
650
750
Hub diam. ∅N
D
All
P
Motor type
All
R C
All
L
160-380
All
Max. weight excl. of motor -112 L
403
-180 Max. weight excl. of motor
117
-132
L
578
-160
850
750
750
750
850
-180
850
900
850
850
850
900
950
950
950
900
950
950
950
1120
1060
1120
1120
1120
1120
329
366
-200 -225 -250 -280
Max. weight excl. of motor
153
192
219
269
Dimensions in mm – Weights in kg excl. motor Flanges: Pitch circle diameter, number of holes and hole size as standard according to EUROVENT 1/2. Mounting positions according to EUROVENT: ACN – arrangement D, motor position B.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 18 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
ACG and ACP – Dimension sketches EUROVENT 1/2
ACG
ACP
ACG and ACP Hub diam. Motor ∅N types A B D P R
All
Size (impeller diameter) 630 710 800 900 1000 1120 1250 1400 1600
250
315
400
500
560
All
310 280 250 4 10
385 355 315 8 10
480 450 400 8 12
590 560 500 12 12
650 620 560 12 12
720 690 630 12 12
800 770 710 16 12
890 860 800 16 12
1000 970 900 16 15
1100 1070 1000 16 15
1220 1190 1120 20 15
1360 1320 1250 20 15
1510 1470 1400 20 15
1720 1680 1600 24 19
All
2.5 333 350 197
2.5 420 350 235
3 545 355 259
3 675 355 259
3 768
3 840
3 950
3 1055
3 1200
3 1332
3 1500
4 1650
4 1800
4 2000
13
16
ACG C J L Fmax
All 4)
160 Max. weight excl. of motor
L Fmax 4) 4)
230-578
All
Max. weight excl. of motor
24
30
355
355
410
415
415
410
670 1)
690 1)
715
739
739
739
250
370
479
544
505
510
494
552
610
579
644
644
26
40
52
57
65
72
139 2)
171 2)
188 2
234 2)
258 2)
297 2)
3 768
3 840
3 950
3 1055
3 1200
3 1332
3 1500
4 1650
4 1800
4 2000
ACP C J L Fmax
All All 4)
160 Max. weight excl. of motor
L Fmax
4)
230-578 Max. weight excl. of motor
All
2.5 333 200 197
2.5 420 200 235
3 545 205 259
3 675 205 259
9
11
15
19
205 250
205 370
260 479
265 544
265 505
260 510
420 3) 494
440 3) 552
465 610
489 579
489 644
489 644
18
28
38
42
48
53
1062)
134 2)
147 2)
188 2)
207 2)
238 2)
1) Type ACG-900/280 L = 430 and ACG-1000/380 L = 450. 2) Hub diameter 578 mm. For other hub diameters smaller weight.
3) Type ACP-900/280 L = 280 and ACP-1000/380 L = 300. 4) Fmax is max. dimension based on motor make type ABB.
Dimensions in mm – Weights in kg excl. motor Flanges: Pitch circle diameter, number of holes and hole size as standard according to EUROVENT 1/2. Mounting positions according to EUROVENT: ACG – arrangement B, motor position A and ACP – arrangement A, motor position A. Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 19 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
ACW – Dimension sketches DIN 24154R – Casing 6 mm
6 mm
E
Hub diam. ∅N
Motor types
Size (impeller diameter) 630 710 800 900 1000 1120 1250 1400 1600
250
315
400
500
560
A
334
409
494
594
674
744
824
914
1015
1115
1255
1385
1535
1745
B
292
366
448
551
629
698
775
861
958
1067
1200
1337
1491
1663
D
250
315
400
500
560
630
710
800
900
1000
1120
1250
1400
1600
276
314
415
455
520
520
520
520
727
777
777
777
777
777
P
8
8
12
12
16
16
16
24
24
24
32
32
32
40
∅R
12
12
12
12
14
14
14
14
14
14
18
18
18
18
C
6
8
6
6
6
6
6
6
6
6
6
6
6
6
All
360
400
520
560
620
620
730
750
850
900
Max. weight excl. motor (∅160 - 380) -112 -132 403 L -160 -180
23
32
48
69
90
99
121
138
166
190
850 850
900 900 900
950 950 950 950
1060 1060 1060 1060
1120 1120 1120
182
207
260
306
351
850 850
900 900 900 900
950 950 950 950 950
1060 1060 1060 1060 1060 1060
243
300
350
E
L
All
160 - 380
All
Max. weight excl. motor (∅403) -132 -160 -180 578 -200 L -225 -250 -280
217
Max. weight excl. motor (∅578)
Dimensions in mm – Weights in kg excl. motor Flanges: Pitch circle diameter, number of holes and hole size as standard according to DIN 24154 R.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 20 of 58
5.1 Axial Flow Fans
1120 1120 1120 1120 1120 1120
1120 1120 1120 1120
425
497
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
ACW – Dimension sketches DIN 24154R - Casing 10 mm
10 mm
E
Hub diam. ∅N
Motor type
A B D E All All P ∅R C L 160-380 All Max. weight excl. motor (∅160 - 380) -112 -132 L 403 -160 -180 Max. weight excl. motor (∅403) -132 -160 -180 L 578 -200 -225 -250 -280 Max. weight excl. motor (∅578)
315
400
500
560
Size (impeller diameter) 630 710 800 900 1000 1120 1250 1400 1600
407 366 315 314 8 12 8 400 44
492 448 400 415 12 12 10 520 68
592 551 500 455 12 12 10 560 96
672 629 560 520 16 14 10 620 123
742 698 630 520 16 14 10 620 137
822 775 710 520 16 14 10 730 172
912 861 800 520 24 14 10 750 195
1012 958 900 727 24 14 10 850 239
1113 1067 1000 777 24 14 10 900 278
850 850 256 850 850
291
1263 1200 1120 777 32 18 10
1393 1337 1250 777 32 18 10
900 900 900 294 900 900 900 900
950 950 950 950 365 950 950 950 950 950
1060 1060 1060 1060 437 1060 1060 1060 1060 1060 1060
330
405
481
1543 1491 1400 777 32 18 10
1753 1663 1600 777 40 18 10
1120 1120 1120 506 1120 1120 1120 1120 1120 1120 580
1120 1120 1120 1120 675
Dimensions in mm – Weights in kg excl. motor Flanges: Pitch circle diameter, number of holes and hole size as standard according to DIN 24154 R.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 21 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Accessories
G
øD
H
Lr
45
4 x øM
T
80 F
L
Fan diameter ∅D
Hub diameter
250 315 400 500
160
400 500 560
630
800
900
1000
ACA
C
2 x 4 ø12
N
710
Mounting foot for horizontal mounting of
80
230 280 330 380
Motor size 71 71-80 71-90 71-90 71-90 100 71-90 100-132 71-90 100-132 160 71-90 100-132 160-180 71-90 100-132 160-180 71-90 100-132 160-180 71-90 100-132 160-180 71-90 100-132 160-180
C 400 500 400 500 400 500 400 500 630 400 500 630 400 500 630 400 500 630 400 500 630 400 500 630
F
G
H
170 200 250 325
285 325 375 435
440 518 615 730
250
375
615
325
435
730
370
485
810
400
525
885
450
575
975
520
625
1070
590
725
1225
670
785
1335
Lr
L
∅M
300
480
8
400 300 400 300 400 300 400 500 300 400 500 300 400 500 300 400 500 300 400 500 300 400 500
580 480 580 480 580 480 580 710 480 580 710 480 580 710 480 580 710 480 580 710 480 580 710
10 8 10
N
T
260 290 360 435 360
2
3
435
480
530
580 12
4 650
720
800
The stated weights are incl. of fan, mounting foot and frame but excl. of motor.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 22 of 58
5.1 Axial Flow Fans
Weight kg 18.1 21.3 26.4 31.6 28.2 33.3 36.7 44.6 44.0 52.3 60.7 54.4 62.5 70.1 59.7 68.9 77.9 65.8 76.2 85.4 87.1 102.3 118.2 87.6 113.3 131.4
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Accessories – ACA – Mounting foot Fan diameter ∅D
Hub Motor size diameter 112-132
900
160-180 112-132
1000
200
1250
G
H
Lr
L
630
590
725
1225
500
710
630
160-180 200-225
630
160-180 200-250
710
132
630
160-180
1600
785
1335
750
845
1455
710
112-132
1400
670
710
112-132
403 578
F
630
160-180
1120
C
810
920
895
970
1575
1725
500
710
630
790
500
710
630
790
500
710
630
790
500
710
630
790
200-250
710
280
800
710
880
200-250
710
630
790
280
800
710
880
1060
1070
1930
∅M
N
Weight kg
T
144.5
720
147.2 157.3
12 800
161.3 186.7 172.1
880
187 210.2 189.3
4 980
207.4 237
14
235.3 277.8
1090
322.5 366.1 371.5
1230
424.1
The stated weights are incl. of fan, mounting foot and frame but excl. of motor
Accessories – ACN – Mounting foot, horizontal Mounting foot for horizontal mounting of ACN T H
2 braces from size 630 up to 1600
-
G C 1) M 1) U Weight, kg
250
315
400
500
560
Size (impeller diameter) 630 710 800 900*
240 296 170 8 1.5
280 336 200 8 2.8
330 454 250 8 3.8
390 494 325 10 4.4
440 554 370 12 7.2
480 554 400 12 11.4
530 664 450 12 13.2
580 684 520 12 14.9
680 784 590 12 21.0
1000* 1120 740 832 670 12 23.5
800 882 750 14 26.0
1250
1400
1600
850 992 810 14 32.6
925 1052 920 14 34.6
1025 1052 1060 14 46.5
* Applies to hub diameters 403 mm and 578 mm. For other hub diameters: Please order special dimension sketch 1) The stated data for C and M are based on max. length of casing. Other data applies for other casing lengths.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 23 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Accessories – ACG and ACP – Mounting foot and diffuser L
L
P x øR
50
P x øR 4 x øU
CxM
65
4 x øU
L1 x N
CxM L1 x N
Mounting foot, vertical,
Mounting foot for ACP.
Mounting foot for ACG.
for vertical mounting of fans
Hub sizes 160 – 380.
Hub sizes 160 – 380.
65
and hood type HAN
Mounting foot for ACP.
Mounting foot for ACG.
Mounting foot for ACG with short diffuser.
Mounting foot for ACG with long diffuser. Hub sizes 403 and 578.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 24 of 58
øA
øD G
G
YxY
øB
øA
øD
øB
150
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Accessories – ACG and ACP – Mounting foot and diffuser
Mounting plate, vertical
Mounting foot and base frame, horizontal, for ACP
Mounting foot and base frame, horizontal, for ACG
Mounting foot and base frame, horizontal, for ACG with short diffuser
Short diffuser
Mounting foot and base frame, for ACG with long diffuser
Long diffuser
Y Weight, kg G C M L1 N U Weight, kg G C M L1 N U Weight, kg G C M L1 N U Weight, kg L3 D1 B1 A3 P1 R1 Weight, kg G C M L1 N U Weight, kg L4 D2 B2 A4 P2 R2 Weight, kg
250
315 400
500
560
Size (impeller diameter) 630 710 800 900* 1000* 1120
580 8 275 420 170 550 260 12 5.7 275 420 170 550 260 12 5.7
645 9 315 420 200 550 290 12 5.7 315 420 200 550 290 12 5.7
830 13 425 420 325 550 435 12 6.3 425 420 325 550 435 12 6.3
890 14 475 420 370 550 480 12 8.5 475 420 370 550 480 12 8.5
960 15 515 570 400 700 530 12 10.2 515 570 400 700 530 12 10.2
730 11 365 420 250 550 360 12 5.7 365 420 250 550 360 12 5.7
1040 20 565 570 450 700 580 12 11.2 565 570 450 700 580 12 11.2
1130 23 615 570 520 700 650 12 12.2 615 570 520 700 650 12 12.2
1230 34 790 1000 900 1090 990 12 50.9 790 1000 900 1090 990 12 50.9 790 1120 900 1210 990 12 52.4 400 1000 1070 1103 16 15 33 790 1120 900 1210 990 12 52.4 900 1120 1190 1223 20 15 52
1330 38 850 1000 1000 1090 1090 12 53.1 850 1000 1000 1090 1090 12 53.1 850 1120 1000 1210 1090 12 57.2 500 1120 1190 1223 20 15 40 850 1120 1000 1210 1090 12 57.2 1000 1250 1320 1363 20 15 62
1450 42 910 1120 1120 1210 1210 12 61.8 910 1120 1120 1210 1210 12 61.8 910 1250 1120 1340 1210 12 61.8 560 1250 1320 1363 20 15 48 910 1250 1120 1340 1210 12 61.8 1100 1400 1470 1513 20 15 74
1250 1400 1600 1580 48 960 1120 1250 1210 1340 12 62.1 960 1120 1250 1210 1340 12 62.1 960 1250 1250 1340 1340 12 63.8 600 1400 1470 1513 20 15 57 960 1250 1250 1340 1340 12 63.8 1400 1600 1680 1723 24 15 102
1730 68 1035 1250 1400 1340 1490 12 68.6 1035 1250 1400 1340 1490 12 68.6 1035 1250 1400 1340 1490 12 68.6 800 1600 1680 1723 24 19 77 1035 1250 1400 1340 1490 12 68.6 1600 1800 1880 1923 24 19 123
1930 79 1135 1250 1600 1340 1690 12 76.7 1135 1250 1600 1340 1690 12 76.7 1135 1250 1600 1340 1690 12 76.7 800 1800 1880 1923 24 19 86 1135 1250 1600 1340 1690 12 76.7 1600 2000 2080 2123 24 19 139
* Applies to hub diameters 403 and 578 mm. Please order special dimension sketch.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 25 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Accessories – ACA, ACN, ACG and ACP Flange standard: EUROVENT 1/2
Outlet
Wire guard
wire guard
Inlet cone
Flexible
Flexible con-
Welded
for mount-
connection with 1
nection with
spigots
ing in cas-
duct spigot
2 duct spig-
Counter flange
Duct spigot
ots
Outlet wire guard Wire guard for mounting in casing Wire guard for mounting in flange
Inlet cone
Counter flange
Duct spigot
315
400
500
560
1120
1250
1400
1600
V Weight, kg
29 0.1
43 0.2
68 0.3
55 0.5
69 0.6
87 0.8
111 0.9
137 1.1
85 2.5
106 3.0
133 3.6
133 3.6
171 4.2
218 5.7
N J
19 246
29 310
43 396
68 496
88 556
55 626
69 706
87 796
111 896
137 996
85 1114
106 1244
133 1394
171 1594
Weight, kg
0.1
0.1
0.2
0.3
0.3
0.5
0.6
0.8
1.0
1.1
2.5
3.0
3.6
4.2
N
29
43
68
88
55
69
87
111
137
85
J Weight, kg
310 0.1
396 0.2
496 0.3
556 0.3
626 0.5
706 0.6
796 0.8
896 0.9
996 1.1
1114 2.5
E1 A1
200 333
200 420
205 545
205 675
260 760
265 840
265 947
260 1055
280 1200
300 1333
320 1520
320 1650
320 1800
320 2000
Weight, kg
4.5
5.5
9.5
12.5
17
19
22
26
32
38
45
51
57
66
T
4
4
4
4
4
4
4
4
8
8
8
8
8
8
ØDF Weight, kg
260 0.7
325 1.1
410 1.5
510 2.2
570 2.4
640 2.7
720 3.0
810 3.4
910 8.5
1010 9.4
1130 10.2
1260 12.2
1410 14.2
1610 17.2
G Weight, kg
55 1.0
55 1.4
55 1.9
55 2.4
55 2.7
55 3.1
55 3.5
55 3.9
85 5.9
85 6.6
85 7.4
85 8.5
85 9.5
85 11.3
LF Flexible connection
Welded spigots
Size (impeller diameter) 630 710 800 900 1000
250
Weight, kg w.1 spigot LF Weight, kg w.2 spigots
Min. 65 mm – Max. 100 mm 1.3
1.7
2.3
3.0
3.5
3.8
Min. 110 mm – Max. 175 mm 4.3
5.0
7.8
Min. 120 mm – Max. 145 mm
8.9
10
11.6
20
2.3
3.0
4.2
5.5
6.2
6.9
7.8
8.8
13.7
15.5
17.4
20.2
22.7
26.6
LS t
100 4
100 4
100 4
100 4
100 4
120 6
120 6
120 6
120 6
150 6
150 6
150 6
150 6
150 6
ØB ØA3
280
355
450
560
620
690
770
860
970
1070
1190
1320
1470
1680
310
385
480
590
650
720
800
890
1000
1100
1220
1360
1510
1720
Weight, kg
3.1
3.9
5.4
6.7
7.5
15.0
16.9
19.0
21.4
29.0
32.4
36.2
40.5
46.3
Flanges: Pitch circle diameter, number of holes and hole size as standard according to EUROVENT 1/2. Dimensions A, B, D, P and R: See pages 14, 18 and 19 for the ACA, ACN, and ACP and ACG, respectively.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 26 of 58
13.1
Min. 210 mm – Max. 250 mm
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Accessories – ACA, ACN, ACG and ACP Flange standard: EUROVENT 1/2
Hood type HAN
Silencer type YAH
Damper type SBC
with or without core
ØD ØB All ØA P (number) ØR L2 ØN ØA2 Silencer ØQ type YAH Casing, mm Weight without core, kg Weight with core, kg H H1 Hood type ØM HAN C Weight, kg L Damper C type SBC Weight, kg
250
315
400
500
560
Size (impeller diameter) 630 710 800 900 1000
1120
1250
1400
1600
250 280 310 4 10 250 125 463 M8 0.9 6.2 7.9 361 180 598 2.5 13 360 2 8.5
315 355 385 8 10 315 160 526 M8 0.9 8.9 11.5 412 228 724 2.5 19 400 2 11.5
400 450 480 8 12 400 200 614 M10 0.9 12.5 16.8 476 290 906 3 40 520 3 23
500 560 590 12 12 500 250 715 M10 0.9 19.1 26.5 540 364 1106 3 58 560 3 31
560 620 650 12 12 560 280 775 M10 0.9 22.8 32.8 641 405 1266 3 79 620 3 40.5
630 690 720 12 12 630 315 845 M10 0.9 27.6 40.8 694 450 1406 3 97 670 3 48
1120 1190 1220 20 15 1120 560 1335 M12 1.25 74.5 134.4 1140 800 2436 3 313 1130 4 183
1250 1320 1360 20 15
1400 1470 1510 20 15
1600 1680 1720 24 19
1252 853 2810 4 625
1402 983 3110 4 776
1602 1153 3510 4 1020
1400
1600
710 770 800 16 12 710 355 925 M10 0.9 33.8 52.1 744 506 1586 3 120 730 3 58
800 860 890 16 12 800 400 1015 M10 0.9 41.3 69.2 811 569 1766 3 151 810 3 82
900 970 1000 16 15 900 450 1115 M12 1.25 50.6 86.8 868 645 2016 3 206 910 3 101
1000 1070 1100 16 15 1000 500 1215 M12 1.25 61.1 109.6 890 710 2236 3 250 1010 4 149
Flanges: Pitch circle diameter, number of holes and hole size as standard according to EUROVENT 1/2 To prevent galvanic corrosion a special tape is put on the back of the brass lining prior to mounting
Thickness = 1 mm
L1
L2
Size (impeller diameter) 630 710 800 900 1000
250
315
400
500
560
L1
14
14
14
14
14
14
14
14
14
14
lining Hubs
L2
150
150
150
150
150
150
150
150
150
150
160-380
Weight, kg
1
1.3
1.6
2.0
2.2
2.5
2.9
3.2
3.6
4.0
Brass
L1
24
24
24
24
24
24
lining Hubs
L2
212
212
212
212
212
212
5.1
5.7
6.3
7.1
8.0
9.1
Brass
403 and 578 Weight, kg
1120
1250
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 27 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Accessories – ACD, ACW
øJ
Dimensions
Outlet wire guard
Inlet cone with wire guard
Mounting feet, horizontal position
5
5
C
Counter flange
Duct spigot
Flexible connection with
Flexible
1 duct apigot
with 2 duct spigots
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 28 of 58
5.1 Axial Flow Fans
connection
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Accessories – ACD, ACW Dimensions – Flange standard DIN 24154
ØD ØB All ØA P (number) ØR H J K Mounting feet, N horizontal1) U Weight, kg Weight, kg L1 ØJ Inlet cone, with wire G guard T Weight, kg V Wire guard, in tube Weight, kg V Wire guard, flange Weight, kg A5 Counter D5 flange. Casing C 6 mm Weight, kg A5 Counter D5 flange. Casing C 10 mm Weight, kg G Duct spigot Weight, kg LF Min. Flexible connection, LF Max. with 1 duct Weight, kg spigot with 1 duct LF Min. Flexible LF Max. connection, Weight, kg with 2 ducts with 2 spigots ducts
250
315
400
500
560
Size (impeller diameter) 630 710 800 900 1000
250 292 326 8 12 240 288 170 260 8 32 229 333 200 6 5.2 19 0.1 29 0.1 334 264 6 1.5 332 272 6 1.3 55 1.1 65 100
315 366 401 8 12 280 324 200 290 8 44 56 243 420 200 8 7.7 29 0.1 43 0.2 409 329 8 2.9 407 337 8 2.5 55 1.5 65 100
400 448 487 12 12 330 444 250 360 8 75 95 273 545 205 8 11.4 43 0.2 69 0.3 494 414 8 3.5 492 422 8 3.0 55 1.9 65 100
500 551 587 12 12 390 484 325 435 10 125 152 260 675 205 8 14.9 68 0.3 88 0.4 594 514 8 4.3 592 522 8 3.8 55 2.5 65 100
560 629 667 16 14 440 544 370 480 12 184 217 329 760 260 8 20.7 88 0.3 55 0.5 674 574 8 6.0 671 581 8 5.4 55 2.8 65 100
630 698 737 16 14 480 544 400 530 12 252 290 352 840 265 8 23.5 55 0.5 69 0.6 744 644 8 6.7 742 652 8 6.0 55 3.2 65 100
710 775 817 16 14 530 654 450 580 12 276 326 376 947 265 8 26.9 69 0.6 87 0.8 824 724 8 7.5 822 732 8 6.7 55 3.5 65 100
800 861 907 24 14 580 674 520 650 12 293 351 397 1055 260 8 30.7 87 0.8 111 0.9 914 814 8 8.3 912 822 8 7.5 55 3.9 65 100
900 958 1007 24 14 680 774 590 720 12 375 449 365 1200 280 8 37.9 111 0.9 137 1.1 1015 915 8 9.3 1012 922 8 8.4 55 9.0 110 175
1000 1067 1108 24 14 740 824 670 800 12 449 536 406 1333 300 8 44.3 137 1.1 85 2.5 1115 1015 8 10.3 1113 1023 8 9.3 55 9.0 110 175
1.3
1.7
2.3
3.0
3.5
3.8
4.3
5.0
6.5
120 145
120 145
120 145
120 145
120 145
120 145
120 145
120 145
2.3
3.0
4.2
5.5
6.2
6.9
7.8
8.8
1120
1250
1400
1600
1120 1200 1251 32 18 800 866 750 880 14 592 697 453 1520 320 12 62.4 85 2.5
1250 1337 1380 32 18 850 976 810 980 14 679 810 453 1650 320 12 68 106 3.0
1400 1491 1530 32 18 925 1036 920 1090 14 930 1086 491 1800 320 12 76.3 133 3.6
1600 1663 1740 40 18 1025 1036 1060 1230 14 1009 1186 538 2000 320 15 98.2 171 4.2
1255 1135 12 20.5 1263 1143 12 20.6 90 8.2 110 175
1385 1265 12 22.8 1393 1273 12 22.9 90 9.1 110 175
1535 1415 12 25.4 1543 1423 12 25.6 90 10.3 110 175
1745 1615 15 39.2 1753 1623 15 93.4 90 11.7 110 175
7.3
8.2
9.5
10.5
12.6
210 250
210 250
210 250
210 250
210 250
210 250
11.1
12.5
14.0
16.2
18.0
21.6
1) Weights are incl. of max. hub and motor size.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 29 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Accessories – ACD, ACW Dimensions – Flange standard DIN 24154
Silencer type YAA
Damper type SBA
ød
øD
with and without core
Hood type HAT for air intake and discharge
L1
L2
Brass lining
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 30 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Accessories – ACD, ACW Dimensions
All
Silencer type YAA, Casing 6 mm
Silencer type YAA, Casing 10 mm
Hood type HAT
Damper type SBA, Casing 6 mm
Damper type SBA, Casing 10 mm
Brass lining HUB 160-380 Brass lining HUB 403 and 578
ØD ØB ØA P (number) ØR L2 A2 ØQ Weight, kg without core Ød Weight, kg with core L2 A2 ØQ Weight, kg without core Ød Weight, kg with core H h M C Weight, kg L A1 C1 C2 Weight, kg L A1 C1 C2 Weight, kg L1 L2 Weight, kg L1 L2 Weight, kg
250
315
400
500
560
Size (impeller diameter) 630 710 800 900 1000
1120
1250
1400
1600
250 292 326 8 12 250 463 M10
315 366 401 8 12 315 529 M10
400 448 487 12 12 400 614 M10
500 551 587 12 12 500 714 M10
560 629 667 16 14 560 774 M12
630 698 737 16 14 630 844 M12
710 775 817 16 14 710 924 M12
800 861 907 24 14 800 1014 M12
900 958 1007 24 14 900 1114 M12
1000 1067 1108 24 14 1000 1214 M12
1120 1200 1251 32 18 1120 1334 M16
1250 1337 1380 32 18
1400 1491 1530 32 18
1600 1663 1740 40 18
30
45
62
86
101
121
146
175
214
255
330
125
160
200
250
280
315
355
400
450
500
560
1252 853 2810 10 641
1402 983 3110 10 794
1602 1153 3510 10 1050
24 212 7.1
24 212 8.0
24 212 9.1
32
47
65
91
109
131
160
198
240
290
364
250 471 M10
315 536 M10
400 622 M10
500 722 M10
560 782 M12
630 852 M12
710 932 M12
800 1022 M12
900 1122 M12
1000 1222 M12
1120 1342 M16
41
60
85
120
143
172
210
255
310
375
465
125
160
200
250
280
315
355
400
450
500
560
43
63
89
125
150
182
222
276
337
408
509
361 180 598 6 14 360 334 6 6 20 360 332 10 10 29 14 150 1
412 228 724 8 21 400 409 8 6 29 400 407 10 10 41 14 150 1.3
476 290 906 8 42 520 494
540 364 1106 8 61 560 594
641 405 1266 8 83 620 674
694 450 1406 8 101 670 744
744 506 1586 8 125 730 824
811 569 1766 8 156 810 914
868 645 2016 8 212 910 1015
890 710 2236 8 254 1010 1115
1140 800 2436 10 330 1130 1255
6 44 520 492 10 10 64 14 150 1.6
6 57 560 592 10 10 85 14 150 2.0
6 77 620 671 10 10 110 14 150 2.2
6 91 670 742 10 10 132 14 150 2.5
6 107 730 822 10 10 159 14 150 2.9
6 143 810 912 10 10 207 14 150 3.2
6 178 910 1012 10 10 257 14 150 3.6 24 212 5.1
6 215 1010 1113 10 10 312 14 150 4.0 24 212 5.7
6 266 1130 1263 10 10 380
24 212 6.3
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 31 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Acoustic diffuser - YAD
Acoustic diffuser type YAD 250-1600
Mini
Size
Hub A1 (mm) (mm)
Novax – Medium
Fan side D1 (mm)
N x R1 (pc. x mm)
A2 (mm)
Duct side B2 D2 P x R2 (mm) (mm) (pc. x mm)
L (mm)
Weight (kg)
250
463
280
253
4 x M8
614
450
404
8 x M10
250
12
315
526
355
318
8 x M8
716
560
504
12 x M10
315
17.5
614
450
404
8 x M8
776
620
564
12 x M10
400
23
716
560
504
12 x M10
846
690
634
12 x M10
500
30.5
614
450
404
8 x M10
776
620
564
12 x M10
400
24.5
400
160
500
Novax – Maxi
B1 (mm)
400
230
500
230 280 330
716
560
504
12 x M10
846
690
634
12 x M10
500
32.5 34 40
560
230 280 330 380
776
620
564
12 x M10
926
770
714
16 x M10
560
40 41.5 44 46.5
630
230 280 330 380
846
690
634
12 x M10
1011
960
804
16 x M10
630
46 40 51.5 56
710
230 280 330 380
926
770
714
16 x M10
1116
960
904
16 x M12
710
62 64 70.5 73
800
230 280 330 380
1016
860
804
16 x M10
1216
1070
1004
16 x M12
800
77 79.5 83 86.5
900
280 330 380
1116
970
904
16 x M12
1336
1190
1124
20 x M12
900
94.5 98.5 108.5
1000
380
1216
1070
1004
16 x M12
1466
1320
1254
20 x M12
1000
122
900
403 578
1116
970
904
16 x M12
1336
1190
1124
20 x M12
900
116 132
1000
403 578
1216
1070
1004
16 x M12
1466
1320
1254
20 x M12
1000
138 157
1120
403 578
1333
1190
1124
20 x M12
1613
1470
1404
20 x M12
1120
154 129.5
1250
403 578
1466
1320
1254
20 x M12
1816
1680
1604
24 x M12
1250
193 198
1400
403 578
1613
1460
1404
20 x M12
2013
1880
1804
24 x M12
1400
248 274
1600
578
1816
1680
1604
24 x M12
2216
2080
2004
24 x M12
1600
320
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 32 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Acoustic diffuser - YAD Sound data (dB/A) and attenuation values Octave band Type YAD 63 (Hz) 125 (Hz) 250 (Hz) 500 (Hz) 1000 (Hz) 2000 (Hz) 4000 (Hz) 8000 (Hz) OutCore Core Core Core Core Core Core Core Hub side diadiameter With- with With- with With- with With- with With- with With- with With- with With- with meter out out out out out out out out (m) (mm) 250 315 400 500
160 160 160 160
1 1 0 0
1 1 0 0
0 0 0 1
1 1 2 1
2 2 3 4
2 2 3 4
8 8 11 11
9 9 12 10
5 5 6 7
11 11 11 12
1 1 1 3
11 11 11 10
1 1 1 3
8 8 7 6
2 2 1 2
5 5 4 4
400 500 560 630 710 800
230 230 230 230 230 230
0 0 0 0 0 0
0 0 0 0 1 0
0 0 1 2 3 1
2 2 1 2 3 1
2 9 4 5 6 8
2 9 4 5 6 8
10 11 12 13 13 14
11 12 12 13 13 14
8 7 8 8 9 7
14 12 13 13 12 12
3 3 4 4 4 4
13 12 11 10 9 9
3 2 4 3 3 3
10 8 7 6 6 6
3 2 3 3 3 2
6 5 5 5 5 4
500 560 630 710 800 900
280 280 280 280 280 280
0 0 0 0 0 1
0 0 0 0 0 1
0 0 1 3 1 3
2 2 1 3 1 3
2 10 4 7 9 7
2 10 4 7 8 7
11 12 12 14 15 13
12 13 12 14 15 13
9 7 8 10 8 5
15 12 14 13 13 11
5 3 5 5 5 2
15 13 11 9 10 7
4 3 4 4 3 3
11 9 7 7 6 6
4 2 3 3 3 4
7 5 5 5 4 5
500 560 630 719 800 900
330 330 330 330 330 330
0 0 0 0 0 0
0 0 0 1 1 0
0 0 0 2 3 1
2 3 2 2 3 1
3 4 10 5 7 9
3 4 10 5 7 9
14 16 12 15 15 15
15 17 13 15 15 15
12 11 8 10 10 8
18 16 13 15 14 14
8 6 4 5 5 5
18 16 13 12 10 10
6 4 3 4 4 4
13 10 9 7 7 7
5 3 3 3 4 3
8 6 5 5 5 4
560 630 719 800 900 1000
380 380 380 380 380 380
0 0 0 0 0 1
0 0 0 1 0 1
0 1 1 3 1 3
2 2 1 3 1 3
3 11 5 8 9 7
3 11 5 8 9 7
14 13 15 16 16 14
15 15 14 16 16 14
13 9 11 12 9 6
19 15 16 15 15 11
8 6 6 6 6 3
18 15 13 11 11 8
7 4 5 5 4 4
14 11 9 7 7 6
5 3 4 4 3 4
8 6 6 6 5 6
900 1000 1120 1250 1400
403 403 403 403 403
0 1 1 1 1
0 1 1 2 2
1 4 3 2 2
1 4 3 2 2
10 7 7 7 7
10 7 7 7 7
17 15 11 5 5
17 15 14 9 8
10 6 6 4 4
15 12 11 10 9
6 3 4 4 3
11 8 8 7 7
4 4 4 4 4
7 7 6 6 5
3 4 4 3 3
5 6 5 5 4
900 1000 1120 1250 1400 1600
578 578 578 578 578 578
0 0 0 1 1 1
0 0 0 1 2 2
1 4 1 4 3 3
1 4 1 4 3 3
6 9 11 8 8 8
6 9 11 8 8 8
18 19 19 13 6 6
18 19 19 16 10 9
15 14 12 7 5 5
20 18 17 13 11 10
10 8 8 5 5 4
16 13 13 9 8 8
7 6 5 5 5 4
11 9 8 7 6 6
5 5 4 5 4 4
7 7 5 6 5 5
Sound data and attenuation values are based on measurings with Novax axial flow fan type ACG.
Sound conditions Final calculation and selection of blade pitch power consumption, motor selection and sound level is done by means of the Novax computer selection program. This is available on CD-ROM and can also be downloaded from www.york-novenco.com.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 33 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Technical Data for Accessories Silencer Type YAH and YAA – Pressure Loss Without core: not essential.
For inlet (ACN,ACA and ACW) silencers without
With core: 0.2 x p dF.
core must be used.
2 YAH silencers end to end: 0.35 x p dF
Example
(p dF = dynamic pressure of the fan).
YAH/YAA-800 with core. Air quantity, qv = 5 m3 /s Air velocity, inlet = 10 m/s p dF = 60 Pa Pressure loss: 0.2 x 60 = 12 Pa
Sound attenuation – average values 63
125
250
500
1k
2k
4k
8k
Without core
Octave band
0
1
10
13
11
9
7
7
dB
With core
2
4
10
17
17
15
12
11
dB
Hood Type HAN and HAT – Pressure Loss Example HAN/HAT-800 for discharge. Air quantity, q v = 5 m3/s Air velocity, inlet = 10 m/s p d, inlet: 60 Pa
pd
Pressure loss: 0.8 x 60 = 48 Pa
Discharge (hood + discharge loss): 0.8 x p d. Inlet (hood only): 0.3 x p d. (p d = dynamic pressure, related to velocity in duct).
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 34 of 58
5.1 Axial Flow Fans
Hz
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Diffusers
ptF = ps2 – pt1 + y × pdF
By mounting a diffuser on the outlet side of the
ptF = total pressure, fan
axial flow fan some of the dynamic loss which is
ps2 = static pressure
generated when lowering the air velocity is recov-
pt1 = total pressure
ered for static pressure, thus ensuring a better fan
pdF = dynamic pressure, fan
efficiency. This especially applies to free outlet fans, where
“The recovery factor” y is an expression for the re-
the entire velocity energy otherwise would be lost.
duction of the correction value 'a' under various
The diffusers for Novax fans are designed to ob-
installation conditions as stated in the opposite ta-
tain optimum recovery of the dynamic energy.
ble.
The design pressure (ptF) of the fan is calculated according to the following formula: “Recovery factor”, y Installation
Duct on outlet
Without diffuser
Free outlet without duct
1*
a
With short diffuser
a x 0.1 + 0.63
a x 0.1 + 0.81
With long diffuser
a x 0.15 + 0.40
a x 0.15 + 0.47
* Measured combination in the computer selection program according to BS-848. For correction value “a”, please see the next page.
Example Fan type ACG, 1470 rpm with free outlet. qv = 20 m3/s. ps = 500 Pa. The following options are available in the Novax computer selection program: ACG-1250/403-6 – 41.9º. a-factor: 1.25. pdF: 159 Pa, or: ACG-1400/403-6 – 37.8º. a-factor: 1.19. pdF: 101 Pa. Calculation of ptF for fan without diffuser: ACG-1250: ptF = 500 – 0 + 1.25 x 159 = 699 Pa. ACG-1400: ptF = 500 – 0 + 1.19 x 101 = 620 Pa. Calculation of ptF for fan with long diffuser: ACG-1250: ptF = 500 – 0 + (1.25 x 0.15 + 0.47) x 159 = 604 Pa. ACG-1400: ptF = 500 – 0 + (1.19 x 0.15 + 0.47) x 101 = 565 Pa. The following calculation in the computer program (enter the calculated ptF) only applies to the specific type. The actual power saving when mounting a long diffuser will be: For ACG-1250/403-6: 17.5 – 15.0 = 2.5 kW. For ACG-1400/403/6: 15.7 – 14.3 = 1.4 kW.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 35 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Installation corrections Designations and definitions Symbol
Unit
Mass flow
qm
kg/s
Air quantity, volume flow
qv
m3/s
Correction value “a”
Inlet diameter
D1
mm
The correction value “a” (from the computer se-
Outlet diameter
D2
mm
lection program) is a loss factor, which, after mul-
Density
r
kg/m3
tiplication by pdF, must be added to the calculated
Flow area
A
m2
The Novax fan performance data have the normal installation methods of the fans.
fan pressure (psF) at free outlet (arrangements A and C), or at a sudden change to a larger duct dimension than the fan outlet.
Mean velocity of plane x
Formula q -----v ρ
q v -----Ax
cx
m/s
Static pressure of plane x
psx
Pa
Dynamic pressure of plane x
Pdx
Pa
0.5 ρ x c2 psx + pdx
Total pressure of plane x
ptx
Pa
The 'a' factor is related to the velocity loss (∆pd) re-
Total pressure of fan
ptF
Pa
sulting from the difference in the air velocity of
Dynamic pressure of fan
pdF
Pa
0.5 ρ x c2
the net area of the fan (the blade area) and the
Static pressure of fan
psF
Pa
ptF – pdF
System loss
pt
Pa
Power consumption
p
kW
Correction value
a
gross area of the outlet opening. The effect of the 'a' factor is reduced by mounting a diffuser on the outlet of the fan. See the previous page.
Pressure (Pa) ptF
= ps2 + pd2 – (ps1 + pd1)
For fans with duct connection on the outlet and unchanged dimensions (arrangements B and D) the 'a' factor is included in the published performance data and no correction is necessary.
= pt2 – pt1 = (ps2 – ps1) + (pd2 – pd1)
psF
= ptF – pdF (Definition).
All inlet sizes of the fan are designated by subindex 1 and all outlet sizes by subindex 2.
Duct on inlet and outlet Type ACA – ACN – ACW – ACD (Arrangement D) ptF
= pt2 – pt1 = (ps2 – (-ps1) + (pd2 – pd1)
if pd2 = pd1; ptF will be = (ps2 – (-ps1)) Duct on inlet and free outlet Type ACA – ACN – ACW – ACD (Arrangement C) ptF
= ps2 + (a x pdF) – pt1
ptF
= ps2 – ps1 + (a x pdF) – pd1
Free outlet to the atmosphere gives pd2 = 0 and ps2 = 0
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 36 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Free inlet and duct on outlet Type ACG (Arrangement B) 1) With free inlet from the atmosphere where pt1 = 0 Pa ptF
= ps2 + pd2 = psF + pdF
2) With inlet from chamber where pt1 ≠ 0 Pa ptF
= ps2 + pd2 – pt1
ptF
= ps2 + Pd2 – (ps1 + pd1)
3) With inlet from a very large room where pd1 ≈ 0 Pa pEF = ps2 – ps1 + pd2
Free inlet and outlet Type ACP (Arrangement A) pdf = ps2 – ps1
Run up time of axial flow fans The run up time of axial flow fans is calculated on the basis of the formula: Please note that according to the international standards the torque of the motor can vary within the following limits: Ms: -15% + 25% of the catalogue value
2
ts
=
0.24 × n × ( Im + I v ) ---------------------------------------------------------- M s Mk Pv 4 10 × P ------- + ------- – ----- M M P
Where ts P Pv n
= run up time (S) = rated output of motor (kW) = required power of fan (kW) = fan speed (rpm) Ms ------- = the ratio between the starting torque of the M motor and the nominal torque. Mk ------- = the ratio between the maximum torque of the M motor and the nominal torque. Iv = the polar moment of inertia of the fan (kgm2) Im = the polar moment of inertia of the motor (kgm2)
Mk: -10% + 0% of the catalogue value The above factors may increase the run up time more than calculated.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 37 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Smoke Extract Fans The axial flow fans types ACN smoke and ACW
Furthermore, the calculation and engineering data
smoke meet the requirements for smoke extract
were checked with a view to verifying whether
fans according to EN12101-3. EN12101-3 is a
the rules laid down in EN12101-3 are being ob-
standard for smoke extract fans which lays down
served
rules of how to verify the applicability of a product range within specified rules based on tests
Size
made on selected fans.
Novax Smoke Extract Fans are as standard designed in 12 sizes with blade diameters from 400
ACN size: Diameter/ Hub
High-temperature special motors: (Motor size)
mm to 1600 mm and hub diameters from 160 to 578 mm.
ACN 400/160
90
ACN 400/230
90/100
Number of blades
ACN 500/160
90
ACN 500/230
90/100
For hub 160 mm: 4 blades
ACN 500/280
90/100/112
ACN 500/330
90/100/112/132
For hub 280 mm: 8 blades
ACN 560/230
90/100
For hub 330 mm: 10 blades
ACN 560/280
90/100/112
ACN 560/330
90/100/112/132
For hub 380 mm: 12 blades
ACN 560/380
90/100/112/132/160
ACN 630/230
90/100
For hub 578 mm: 10 blades
ACN 630/280
90/100/112
The following types of Novax smoke extract fans
ACN 630/330
90/100/112/132
ACN 630/380
90/100/112/132/160/180
have been found to conform to EN12101-3 cate-
ACN 710/230
90/100
ACN 710/280
90/100/112
ACN 710/330
90/100/112/132
ACN 710/380
90/100/112/132/160/180
ACN 800/230
90/100
ACN 800/280
90/100/112
ACN 800/330
90/100/112/132
ACN 800/380
90/100/112/132/160/180
ACN 900/280
90/100/112/132/160/180
ACN 900/330
132/160/180
ACN 900/380
132/160/180/200
ACN 900/403
132/160
ACN 900/578
160/180
ACN 1000/380
90/100/112/132/160/180
ACN 1000/403
132/160/180
ACN1000/578
132/160/180/200
ACN 1120/403
112/132/160/180
ACN 1120/578
132/160/180/200/225
ACN 1250/403
112/132/160/180
ACN 1250/578
132/160/180/200/225/250
ACN 1400/403
132/160/180
ACN 1400/578
160/180/200/225/250/280
ACN 1600/578
200/225/250/280
For hub 230 mm: 6 blades
For hub 403 mm: 6 blades
gory C1: 300 °C/1 hour. Please contact YORK Novenco for details on selection of Novax smoke extract fans.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 38 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Pump Room Fan type HGP
Materials and Surface Treatment
Product and Application Axial flow fan with adjustable blades for application in marine ventilating system. The axial flow fan type HGP is for duct connection with direct outlet.
Hub Sendzimir galvanized sheet steel Blades Aluminium.
Range
9 sizes with impeller diameters from 315 to 1120
Casing and static parts
mm.
Welded sheet steel, hot dip galvanized 3
Air quantities from 0.18 to 22 m /s and total pressures up to 1300 Pa in duct suction side.
Wire guard AISI 304, mesh 13 x 13 mm
Number of Hub Diameters 5 - from 160 to 578 mm.
Corrosion Classification
As standard class C3 according to EN ISO 12944 and C5-1 (Very high) according to DS/EN ISO
Number of Blades
12944. The standard designs of HGP fans are intended
Hub dia. mm
Number of blades
160
4
230
6
330
10
Duct on inlet and free outlet
380
12
Type HGP (Arrangement C)
578
10
for operation in marine environments.
PtF = ps2 + (a × pdF) – pt1 PtF = ps2 – ps1 + (a × pdF) – pd1 Free outlet to the atmosphere gives
Motors
Asynchronous motors.
pd2 = 0 and ps2 = 0
Dimension standard: IEC-72. Electrical standard: IEC-34. Insulation: Class F. Foot-mounted motors. Flame proof
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 39 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Drain pipe
Front
Back
The axial flow fan type HGP is applicable for ven-
bearing housing and an external flexible coupling.
tilation of pump rooms and as fan in mechanical
The coupling is of spark proof design.
ventilating systems in which explosive gases
The Novax rotor (the impeller) consists of two as-
might appear. It is designed according to the rules
sembled hub discs with cavities to house the
of the classification societies for “Non-sparking
blades at preset angles. The rotor is provided
fans for hazardous locations on board ships”.
with a hub boss for mounting onto a motor shaft.
Type HGP complies with the requirements of the
The cast aluminium blades of the rotor can be fac-
classification societies for fans handling explosive
tory adjusted to any angle between 25 and 60°, de-
gases.
pendent on size and speed.
– Flame-proof motor mounted outside the air
The hot dip galvanized fan casing is provided with flanges on the inlet side according to DIN
stream – Bearing assembly incorporating seals prevents
24154 and with a wire guard of rustless steel type AISI 304 with a mesh size of 13 x 13 mm on the
gases from penetrating into the motor. – Impeller cast in aluminium alloy rules out the
outlet side.
risk of sparking in case of contact with the casing. HGP is available in 9 sizes from 315 mm to 1120 mm. Performance from 0.18 m3/s to 22 m3/s.
Description
HGP is a sturdy fan with flange on the inlet side especially designed for installation on stand-pipe on deck of a ship. The fan is “upward blowing” and consists of a fan casing, an impeller, an explosion proof electric motor and a coupling arrangement consisting of a
All outside machined surfaces must be treated with Dinitro 112.
Type HGP
50 Hz Motor
60 Hz Motor
315/160
80 B
80 B
400/230
500/330
630/380
710/380
800/380
900/578
132 M
180 M
1000/578
1120/578
160 L
180 L
200 L
225 S
80 B
90 L
100 L
90 L
100 L
132 M
132 S
100 L
132 S
160 L
160 L
80 B
90 L
100 L
90 L
112 M
112 M
112 M
132 M
180 M
200 L
100 L
132 S
132 M
132 S
160 M
200 L
225 S
160 L
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 40 of 58
5.1 Axial Flow Fans
180 L
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax HGP Dimensions Positions according to DIN 24154
Px øR Size HGP (impeller diameter) HGP-315 HGP-400 HGP-500 HGP-630 HGP-710 HGP-800 HGP-900 HGP-1000 HGP-1120 A
536
676
846
1046
1146
1286
1448
1608
1798
B
400
500
630
800
900
1000
1120
1250
1400
C
8
8
8
10
10
10
10
10
12
D1
315
400
500
630
710
800
900
1000
1120
D2
366
448
551
698
775
861
958
1067
1200
D3
402
487
587
735
815
905
1027
1127
1247
L
800
985
1178
1426
1463
1639
1913
2097
2311
P
8
12
12
16
16
24
24
24
32
R
12
12
12
14
14
14
14
14
18
a
295
342
392
448
465
509
639
691
742
b
335
430
530
690
710
800
900
1000
1120
c
170
213
256
288
288
330
374
406
449
d
190
236
296
360
356
400
450
500
560
Weight, kg
69
104
163
241
266
329
599
717
862
Weight without motor
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 41 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-315 – 1380 r.p.m.
Performance Curves - 50 Hz
80
m3. The curve numbers (30 to 55), representing the blade pitch, form part of the type designation, e.g. HGP-315-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
The curves are based on air density r = 1.20 kg/ 60
40
20
same definitions as AMCA 210-1985 and BS 848 part 1 1980.
30°
0 0
0.1
0.2
40°
35°
0.3
55° 45° 50° 0.5
0.4
Motor for -315 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-080.
Power consumption, kW
0.07
55°
0.06 0.05 50° 0.04 45° 0.03 40° 0.02 30°
0.01 0
0.1
0.2
35°
0.4
0.3
3
Air flow rate, m /s
Power consumption, kW
Static pressure, Pa
HGP-315 – 2790 r.p.m.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 42 of 58
5.1 Axial Flow Fans
0.5
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-400 – 1450 r.p.m.
Performance Curves - 50 Hz m3. The curve numbers (30 to 55), representing the blade pitch, form part of the type designation, e.g. HGC-400-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
The curves are based on air density r = 1.20 kg/
same definitions as AMCA 210-1985 and BS 848
Motor for -400 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-080, DNGW-100.
Power consumption, kW
part 1 1980.
Air flow rate, m3/s
Power consumption, kW
Static pressure, Pa
HGP-400 – 2880 r.p.m.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 43 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-500 – 1450 r.p.m.
Performance Curves - 50 Hz m3. The curve numbers (30 to 55), representing the blade pitch, form part of the type designation, e.g. HGP-500-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
The curves are based on air density ρ = 1.20 kg/
same definitions as AMCA 210-1985 and BS 848
Motor for -500 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-090, DNGW-100 and DNGW-132.
Power consumption, kW
part 1 1980.
Air flow rate, m3/s
HGP-500 – 2905 r.p.m. 1600
Static pressure, Pa
1400 1200 1000 800 600 400 200 30°
0 0
1
35°
2
40° 3
45°
50°
55°
4
5
Power consumption, kW
7 6 55° 5 50°
4 3
45° 40°
2 35° 1 0
30° 0
1
2
3
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 44 of 58
5.1 Axial Flow Fans
4
5
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-630 – 1450 r.p.m.
Performance Curves - 50 Hz The curves are based on air density ρ = 1.20 kg/ the blade pitch, form part of the type designation, e.g. HGP-630-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
m3. The curve numbers (30 to 55), representing
same definitions as AMCA 210-1985 and BS 848
Motor for -630 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-100, DNGW-112, DNGW-132 and DNGW-160.
Power consumption, kW
part 1 1980.
Air flow rate, m3/s
Power consumption, kW
Static pressure, Pa
HGP-630 – 2920 r.p.m.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 45 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-710 – 1450 r.p.m.
Performance Curves - 50 Hz m3. The curve numbers (30 to 55), representing the blade pitch, form part of the type designation, e.g. HGP-710-45. The curve are based on measurements in a meas-
Static pressure, Pa
The curves are based on air density ρ = 1.20 kg/
uring set-up giving the same result and using the same definitions as AMCA 210-1985 and BS 848
Motor for -710 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-132.
Power consumption, kW
part 1 1980.
Air flow rate, m3/s
Power consumption, kW
Static pressure, Pa
HGP-710 – 2880 r.p.m.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 46 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-800 – 1450 r.p.m.
Performance Curves - 50 Hz The curves are based on air density ρ = 1.20 kg/ the blade pitch, form part of the type designation, e.g. HGP-800-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
m3. The curve numbers (30 to 55), representing
same definitions as AMCA 210-1985 and BS 848
Motor for -800 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-132 and DNGW-160.
Power consumption, kW
part 1 1980.
Air flow rate, m3/s
Motor for -900 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56.
HGP-900 – 1450 r.p.m.
Flameproof enclosure EEx de IIC T4.
Power consumption, kW
Static pressure, Pa
Type DNGW-180 and DNGW-200.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 47 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-1000 – 1450 r.p.m.
Performance Curves - 50 Hz m3. The curve numbers (30 to 55), representing the blade pitch, form part of the type designation, e.g. HGP-1000-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
The curves are based on air density ρ = 1.20 kg/
same definitions as AMCA 210-1985 and BS 848
Motor for -1000 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-160, DNGW-200 and DNGW-225.
Power consumption, kW
part 1 1980.
Air flow rate, m3/s
Motor for -1120 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56.
HGP-1120 – 1450 r.p.m.
Flameproof enclosure EEx de IIC T4.
Power consumption, kW
Static pressure, Pa
Type DNGW-180 and DNGW-225.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 48 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-315 – 1750 r.p.m.
Performance Curves - 60 Hz The curves are based on air density ρ = 1.20 kg/ the blade pitch, form part of the type designation, e.g. HGP-315-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
m3. The curve numbers (30 to 55), representing
same definitions as AMCA 210-1985 and BS 848
Motor for -315 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-080.
Power consumption, kW
part 1 1980.
Air flow rate, m3/s
Power consumption, kW
Static pressure, Pa
HGP-315 – 3490 r.p.m.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 49 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-400 – 1770 r.p.m.
Performance Curves - 60 Hz The curves are based on air density ρ = 1.20 kg/ the blade pitch, form part of the type designation, e.g. HGP-400-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
m3. The curve numbers (30 to 55), representing
same definitions as AMCA 210-1985 and BS 848
Motor for -400 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-080, DNGW-090 and DNGW-100.
Power consumption, kW
part 1 1980.
Air flow rate, m3/s
Power consumption, kW
Static pressure, Pa
HGP-400 – 3490 r.p.m.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 50 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-500 – 1770 r.p.m.
Performance Curves - 60 Hz
400
The curves are based on air density ρ = 1.20 kg/ the blade pitch, form part of the type designation, e.g. HGP-500-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
m3. The curve numbers (30 to 55), representing
300
200
100
same definitions as AMCA 210-1985 and BS 848 part 1 1980.
30°
Motor for -500 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-090, DNGW-100 and DNGW-132.
Power consumption, kW
0
0
35°
40° 2
1
45°
50°
55° 3
1.5 55° 1
50° 45°
0.5
40° 35°
30° 0
0
2
1
3
3
Air flow rate, m /s
HGP-500 – 3490 r.p.m.
Static pressure, Pa
1500
1000
500
Power consumption, kW
0
30° 0
1
2
35°
40°
45° 4
3
50°
55°
5
10
55° 50°
5
45° 40° 30°
0
0
1
2
35°
3
4
5
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 51 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-630 – 1770 r.p.m.
Performance Curves - 60 Hz m3. The curve numbers (30 to 55), representing the blade pitch, form part of the type designation, e.g. HGP-630-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
The curves are based on air density ρ = 1.20 kg/
same definitions as AMCA 210-1985 and BS 848
Motor for -630 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-100, DNGW-112 and DNGW-132.
Power consumption, kW
part 1 1980.
Air flow rate, m3/s
Motor for -710 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56.
HGP-710 – 1770 r.p.m.
Flameproof enclosure EEx de IIC T4.
Power consumption, kW
Static pressure, Pa
Type DNGW-112 and DNGW-132.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 52 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-800 – 1770 r.p.m.
Performance Curves - 60 Hz m3. The curve numbers (30 to 55), representing the blade pitch, form part of the type designation, e.g. HGP-800-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
The curves are based on air density ρ = 1.20 kg/
same definitions as AMCA 210-1985 and BS 848
Motor for -800 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-132 and DNGW-160.
Power consumption, kW
part 1 1980.
Motor for -900
Air flow rate, m3/s
Mounting B3 (form A, DIN 42673) Class F insulation.
HGP-900 – 1770 r.p.m.
Enclosure IP56. Flameproof enclosure EEx de IIC T4.
Power consumption, kW
Static pressure, Pa
Type DNGW-180 and DNGW-200.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 53 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-1000 – 1165 r.p.m.
Performance Curves - 60 Hz The curves are based on air density ρ = 1.20 kg/ the blade pitch, form part of the type designation, e.g. HGP-1000-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
m3. The curve numbers (30 to 55), representing
same definitions as AMCA 210-1985 and BS 848
Motor for -1000 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-160, DNGW-200 and DNGW-225.
Power consumption, kW
part 1 1980.
Air flow rate, m3/s
Power consumption, kW
Static pressure, Pa
HGP-1000 – 1770 r.p.m.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 54 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Novax axial flow fan type HGP
HGP-1120 – 1165 r.p.m.
Performance Curves - 60 Hz m3. The curve numbers (30 to 55), representing the blade pitch, form part of the type designation, e.g. HGP-1120-45. The curve are based on measurements in a measuring set-up giving the same result and using the
Static pressure, Pa
The curves are based on air density ρ = 1.20 kg/
same definitions as AMCA 210-1985 and BS 848
Motor for -1120 Mounting B3 (form A, DIN 42673) Class F insulation. Enclosure IP56. Flameproof enclosure EEx de IIC T4. Type DNGW-180.
Power consumption, kW
part 1 1980.
Air flow rate, m3/s
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 55 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Axial Flow Fan type HGC
The impeller, consisting of a hub and a number of
Product and Application
aerofoil blades, is carefully balanced statically as
The axial flow fan type HGC is applicable for ven-
well as dynamically.
tilation of pump rooms and as fan in mechanical
The Novax rotor (the impeller) consists of two as-
ventilating systems in which explosive gases
sembled hub discs with cavities to house the
might occur and is designed according to the
blades at preset angles. The rotor is provided with
rules of the classification societies for “Non-spark-
a hub boss for mounting onto a shaft. The blades
ing fans for hazardous locations on board ships”.
of the rotor can be factory adjusted to any angle
Type HGC complies with the requirements of the
between 25 and 60°, dependent on speed of rotor.
classification societies for fans handling explosive
The bearing assembly comprises deep-grove ball
gases.
bearings (lubricated for life), shaft, housing, flexi-
– Flame-proof motor mounted outside the air
ble coupling and gas-tight seals.
stream. – Bearing assembly incorporating seals prevents
Range
The fan is available with impeller diameter 250
gases from penetrating into the motor.
mm and hub diameter 160 mm.
– Impeller cast in aluminium alloy rules out the risk of sparking in case of contact with the cas-
Air quantities from 0.1 to 0.5 m3/s and total pres-
ing.
sures up to 250 Pa in duct suction side.
Description
Materials and Surface Treatment
Axial flow fan type HGC consists of fan casing,
Casing
weather hood, impeller, bearing assembly and
Heavy gauge steel plate, hot-dip galvanized and
electric motor.
brass lining.
The fan casing is designed with a view to attaining the best possible flow condition and the low-
The weather hood
est possible loss in pressure. On the inside it is
Heavy gauge steel plate, hot-dip galvanized.
provided with a brass lining opposite to the impeller. The lower edge of the casing is provided
Blades
with a flange for mounting the fan on top of a
Aluminium alloy (cast).
standpipe or post.
Motors
A protective screen of galvanized wire is fitted at
The motor, naturally cooled, is flame-proof in
the upper end of the casing.
compliance with EEXde II C T4, approved by the
The weather hood consists of a low conical top
classification societies.
plate and a skirt providing effective protection
The fan can be mounted with the following
against rough weather and spray.
Fran size
A
250
594
3 motor frame sizes 71 - 80 -90.
H*
C
D
E
G
J
K
T
Weight/kg**
319
250
292
330
8
11,5
8
17
* H-dimension depends on motor size. ** Excl. motor
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 56 of 58
5.1 Axial Flow Fans
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Total pressure, Pa
Performance Curves HGC-250/160
300
60 Hz 3490 rpm max. 0.4 kW
50 Hz 2790 rpm max. 0.2 kW
200
100 60 Hz 1770 rpm max. 0.06 kW
50 Hz 1380 rpm max. 0.03 kW 0
0
0.1
0.2
0.3
0.4
0.5
0.6 3
Air flow, q, m/s
The above curves show the exhaust capacity of the fan type HGC-250/160.
The fan performance is for duct connection for in-
Motor for –250/160
let and free discharge
Mounting B5 Class F insulation
The curve are based on measurements in a meas-
Enclosure IP56
uring set-up giving the same result and using the
Flameproof enclosure EEx de IICT4.
same definitions as AMCA 210-1985 and BS 848 part 1 1980.
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice 5.1 Axial Flow Fans
Page 57 of 58
HI-PRES MARINE & OFFSHORE
5.1 Axial Flow Fans
Products
Owing to continued product development YORK Novenco reserves the right to introduce alterations without prior notice Page 58 of 58
5.1 Axial Flow Fans