Actividad Cisco 3 6.5.1.1

Paso 4: Utilizar comandos de verificación para revisar el resultado de los protocolos de routing. a. Para comparar la información de los protocolos de routing de las dos topologías, emita el comando showip route en el R1 para las topologías 1 y 2.

Router1#show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.1.0/24 is directly connected, GigabitEthernet0/0 L 192.168.1.1/32 is directly connected, GigabitEthernet0/0 R 192.168.2.0/24 [120/1] via 192.168.12.2, 00:00:20, Serial0/0/0 R 192.168.3.0/24 [120/2] via 192.168.12.2, 00:00:20, Serial0/0/0 192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.12.0/30 is directly connected, Serial0/0/0 L 192.168.12.1/32 is directly connected, Serial0/0/0 192.168.13.0/24 is variably subnetted, 3 subnets, 3 masks R 192.168.13.0/24 [120/2] via 192.168.12.2, 00:00:20, Serial0/0/0 C 192.168.13.0/30 is directly connected, Serial0/0/1 L 192.168.13.1/32 is directly connected, Serial0/0/1 192.168.23.0/30 is subnetted, 1 subnets R 192.168.23.0/30 [120/1] via 192.168.12.2, 00:00:20, Serial0/0/0

Router1(1)# Router1#show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route

Gateway of last resort is not set 192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.1.0/24 is directly connected, GigabitEthernet0/0 L 192.168.1.1/32 is directly connected, GigabitEthernet0/0 192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.12.0/30 is directly connected, Serial0/0/0 L 192.168.12.1/32 is directly connected, Serial0/0/0 192.168.13.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.13.0/30 is directly connected, Serial0/0/1 L 192.168.13.1/32 is directly connected, Serial0/0/1

c. Emita el comando show ip protocols en el R1 para las tablas de topología 1 y 2. Cree otra tabla en su archivo del software de procesamiento de texto y coloque la información del resultado debajo de RIPo EIGRP. Router1#

Router1#show ip protocols Routing Protocol is "rip" Sending updates every 30 seconds, next due in 7 seconds Invalid after 180 seconds, hold down 180, flushed after 240 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Redistributing: rip Default version control: send version 2, receive 2 Interface Send Recv Triggered RIP Key-chain GigabitEthernet0/0 2 2 Serial0/0/0 2 2 Serial0/0/1 2 2 Automatic network summarization is not in effect Maximum path: 4 Routing for Networks: 192.168.1.0 192.168.12.0 192.168.13.0 Passive Interface(s): Routing Information Sources: Gateway Distance Last Update 192.168.12.2 120 00:00:25 Distance: (default is 120)

Router1(1)# Router1#show ip protocols Routing Protocol is "eigrp 1 " Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Default networks flagged in outgoing updates Default networks accepted from incoming updates Redistributing: eigrp 1 EIGRP-IPv4 Protocol for AS(1) Metric weight K1=1, K2=0, K3=1, K4=0, K5=0 NSF-aware route hold timer is 240 Router-ID: 192.168.1.1 Topology : 0 (base) Active Timer: 3 min Distance: internal 90 external 170 Maximum path: 4 Maximum hopcount 100 Maximum metric variance 1 Automatic Summarization: disabled Automatic address summarization: Maximum path: 4 Routing for Networks: 192.168.1.0 192.168.12.0/30 192.168.13.0/30 Routing Information Sources: Gateway Distance Last Update Distance: internal 90 external 170 d. Emita el comando show cdp neighbors en la topología 1 del R1. Copie el resultado a una tercera tabla con RIP como encabezado y emita el comando show ip eigrp neighbors en la topología 2 del R1. Copie el resultado de este comando en la columna 2 de la tabla 3 bajo el encabezado EIGRP Router1#

Router1#show cdp neighbors Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID Router Ser 0/0/0 163 R C1900 Ser 0/0/0 Router2 Ser 0/0/1 174 R C1900 Ser 0/0/0

Router1(1)#

Router1#show cdp neighbors Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID Router2 Ser 0/0/1 154 R C1900 Ser 0/0/0 Router Ser 0/0/0 156 R C1900 Ser 0/0/0