Bibliography

Bibliography

BIBLIOGRAPHY

1. C.N. Satterfield and Sherwood Stranier, ; “Role of diffusion in catalyst ” Nostrand Company Inc. 2. D. Q. Kern; “Process Heat Transfer” Internal Student Edition McGraw Hill Kogakusha Ltd. 3. Patrick G. Gaune, J. Chem. Eng. Data, 1982, 27 (2),” Viscosity of potassium nitrate-sodium nitrite-sodium nitrate mixtures” http://pubs.acs.org/doi/abs/ 10.1021/je00028a014 4. AP-42, CH 6.14: Maleic Anhydride,

www.epa.gov/ttn/chief/ap42/ch06/final/c06s14.pdf 5. Gael D. Ulrich P. T. Vasudevan ; “A Guide to Chemical Engineering Process Design and Economics” 2nd Ed., Process publishing (1993). 6. Max S. Peters Klaus D. Timmerhaus Ronald E. West “Plant design and Economics for Chemical Engineers” Ed. 5. McGraw Hill Inc. 7. CHARLES G. HILL, JR. “Introduction to Chemical Engineering Kinetics and Reactor Design” John Wiley & Sons, New York (1977). 8. D.S. Carlotta Cortelli and Prof. Fabrizio Cavani “Heterogeneous Catalysts for GasPhase Selective Oxidation Reactions” Department of Industrial Chemistry and Materials University of Di Bologna, Italy. 9. World Petrochemical (WP) report on Maleic Anhydride “http://www.sriconsulting.com/ WP/Public/Reports/ma/” 10. Timothy R. Felthouse, Joseph C. Burnett, Ben Horrell, Michael J. Mummey, and Yeong-Jen Kuo, ; “Maleic Anhydride, Maleic Acid and Fumaric Acid” Submitted for Kirk Online (April 26, 2001) 11.

Harry Silla, “Chemical Process Engineering Design and Economics”, Marcel

Dekker,Inc. (2003), United States of America. 12.

Alain Chauvel & Gilles Lefebvre, Petrochemical processes

13.

ASME Codes section II Part D Table (1A) 246

Bibliography

14.

Specialty Process Equipment Corporation Pvt. Ltd. (SPEC)

15.

Branan C.R., “Rules of Thumb for Chemical Engineers”, Gulf Publishing

Company, (1995), United States of America. 16.

Dennis R. Moss, “Pressure Vessel Design Manual”, Gulf Publishing company

Houston London, Paris Tokyo. 17.

Eugene F. Megyesy, “Pressure vessel handbook”, Ed 12, Pressure Vessel

Handbook Publishing Inc. 18.

R.K. Sinnott, “Coulson & Richardson’s Chemical Engineering”, Vol. 6, 3,

Edition, Butterworth-Heinemann, Reviewed (2001, 2003). Great Britian. 19.

Smith J.M., Van Ness H.C., Abbott M.M., “Introduction to Chemical

Engineering Thermodynamics”, Ed. 6, Tata McGraw Hill Publishing Company Limited, New Delhi (2006). 20.

Perry R.H.,Green D., “Perry’s Chemical Engineers Handbook” 7th Edition,

McGraw Hill Publishing Company Limited 21.

Stanley M.Walas, “Chemical Process Equipment, Selection & Design”,

Chemical Engineers”, Ed 5. Butterworth 22.

Heiaemamm Series in Chemical Engineer.

23.

Warren L. McCabe, Julian C. Smith, Peter Harriott, “ Unit Operation of

Chemical 24.

Engineering”, Edition 5th, McGraw-Hill, Inc.

Ernest Ludwig, “Applied Process Design For Chemical And Petrochemical

Plants” Ed. 3, Vol 2.

247