Captiva Ecm 2.4 L

Captiva

2. ECM (ENGINE CONTROL MODULE) : ME7.9.9 (FAM II 2.4D) 1) BATTERY POWER SUPPLY, GROUND, EI SYSTEM, GENERATOR & CKP SENSOR CIRCUIT

a. CONNECTOR INFORMATION CONNECTOR NO (PIN NO, COLOR) G108

CONNECTING WIRING HARNESS

CONNECTOR POSITION

Engine (FAM II)

On the Cylinder Block

b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION

c. POSITION OF CONNECTORS AND GROUNDS 

W/H ENGINE (LD9)



W/H INSTRUMENT PANEL

2) FUEL PUMP, INJECTOR & HEATED O2 SENSOR CIRCUIT

a. CONNECTOR INFORMATION CONNECTOR NO (PIN NO, COLOR)

CONNECTING WIRING HARNESS

CONNECTOR POSITION

X304 (12 Pin, Black)

Fuel Sender - Body

Below the right "C" pillar

G108

Engine (FAM II)

On the Cylinder Block

GX402 (Black/Gray)

Body

Right the luggage compartment

b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION

c. POSITION OF CONNECTORS AND GROUNDS 

W/H ENGINE (LD9)



W/H BODY

d. SPLICE PACK

3) ETC MODULE, SENSOR (MAP, ECT, KNOCK, ACP & ACCELERATOR PEDAL), OIL PRESSURE SWITCH & LEGR CIRCUIT

a. CONNECTOR INFORMATION CONNECTOR NO (PIN NO, COLOR)

CONNECTING WIRING HARNESS

CONNECTOR POSITION

X101 (36 Pin, Black)

Engine - Body

Behind the Engine Fuse Block

X201 (92 Pin, Black)

Body - I.P

Below to the "A" pillar

G108

Engine (FAM II)

On the Cylinder Block

b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION

c. POSITION OF CONNECTORS AND GROUNDS 

W/H ENGINE (LD9)

d. SPLICE PACK

4) EVAP CANISTER PURGE SOLENOID, SENSOR (CMP, ACCELERATOR PEDAL, FUEL LEVEL) & CLUTCH SWITCH CIRCUIT

a. CONNECTOR INFORMATION CONNECTOR NO (PIN NO, COLOR)

CONNECTING WIRING HARNESS

CONNECTOR POSITION

X101 (36 Pin, Black)

Engine - Body

Behind the Engine Fuse Block

X201 (92 Pin, Black)

Body - I.P

Below to the "A" pillar

X304 (12 Pin, Black)

Fuel Sender - Body

Below the right "C" pillar

b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION

c. POSITION OF CONNECTORS AND GROUNDS 

W/H ENGINE (LD9)



W/H INSTRUMENT PANEL

d. SPLICE PACK

5) BRAKE SWITCH, BACK UP SWITCH, NSBU SWITCH CIRCUIT

a. CONNECTOR INFORMATION CONNECTOR NO (PIN NO, COLOR)

CONNECTING WIRING HARNESS

CONNECTOR POSITION

X101 (36 Pin, Black)

Engine - Body

Behind the Engine Fuse Block

X201 (92 Pin, Black)

Body - I.P

Below to the "A" pillar

G108

Engine (FAM II)

On the Cylinder Block

b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION

c. POSITION OF CONNECTORS AND GROUNDS 

W/H ENGINE (LD9)



W/H BODY

d. SPLICE PACK

6) DLC (DATA LINK CONNECTOR) CIRCUIT

a. CONNECTOR INFORMATION CONNECTOR NO (PIN NO, COLOR)

CONNECTING WIRING HARNESS

CONNECTOR POSITION

X201 (92 Pin, Black)

Body - I.P

Below to the "A" pillar

X203 (6 Pin, Colorless)

I.P - Air Bag

Below the floor console

X204 (16 Pin, Black)

I.P - FATC

Behind the FATC

GX201 (Black/Gray)

I/P

Behind Steering Column Lower

b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION

c. POSITION OF CONNECTORS AND GROUNDS 

W/H BODY



W/H INSTRUMENT PANEL

d. SPLICE PACK

© Copyright Chevrolet Europe. All rights reserved