Cblm-cover-css-ncii.docx

HOW TO USE THIS COMPETENCY BASED LEARNING MATERIAL Welcome to the module in “Installing and Configuring Computer Systems”. This module holds training materials and undertakings for you to complete. This unit, "Install and Configure Computer Systems", covers the outcomes required in assembling electronic products. It is consist of competencies to prepare to assemble electronic products, prepare/make PCB modules, mount and solder electronic components, assemble electronic products, test and inspect assembled electronic products and to develop knowledge, skills, abilities and attitude required with the industry standard. You are required to go through a series of learning activities in order to complete each learning content. Information Sheets consist of learning contents that you need to learn. Each Information Sheet has a learning objective that you need to attain while reading the Information Sheet. After each Information Sheet is a Self-Check that will help you test yourself if you have attained the learning objectives. Compare your answer to the corresponding Answer Key. You must answer all the questions correctly before proceeding to the next activity Assignment, Operation, Task and Job Sheets are activity sheets that will help you practice the skills previously discussed in the Information Sheets or demonstrated by your trainer. A Performance Criteria Checklist is provided which will allow for self-evaluation or peer evaluation. This Performance Criteria may be used by your trainer to evaluate your performance. Follow these activities on your own. When you are ready, present your work to your trainer for final evaluation and recording, if you have questions, don’t hesitate to ask your trainer for assistance.

Recognition of Prior Learning (RPL) You may already have some or most of the knowledge and skills covered in this learner's guide because you have: been working for some time already completed training in this area. If you can demonstrate to your trainer that you are competent in a particular skill or skills, talk to him/her about having them formally recognized so you don't have to do the same training again. If you have a qualification or Certificate of Competency from previous trainings, show it to your trainer. If the skills you acquired are still current and relevant to the Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Document No. Issued by: NTTA

Page I of XIV

unit/s of competency they may become part of the evidence you can present for RPL. If you are not sure about the currency of your skills, discuss this with your trainer. At the end of this module is a Learner’s Diary. Use this diary to record important dates, jobs undertaken and other workplace events that will assist you in providing further details to your trainer or assessor. A Record of Achievement is also provided for your trainer to complete once you complete the module. This module was prepared to help you achieve the required competency, in Assembling Electronic Products. This will be the source of information for you to acquire knowledge and skills in this particular trade independently and at your own pace, with minimum supervision or help from your instructor. 

Talk to your trainer and agree on how you will both organize the training of this unit. Read through the module carefully. It is divided into sections, which cover all the skills, and knowledge you need to successfully complete this module.



Work through all the information and complete the activities in each section. Read information sheets and complete the self-check. Suggested references are included to supplement the materials provided in this module.



Most probably your trainer will also be your supervisor or manager. He/she is there to support you and show you the correct way to do things.



Your trainer will tell you about the important things you need to consider when you are completing activities and it is important that you listen and take notes.



You will be given plenty of opportunity to ask questions and practice on the job. Make sure you practice your new skills during regular work shifts. This way you will improve both your speed and memory and also your confidence.



Talk to more experience workmates and ask for their guidance.



Use the self-check questions at the end of each section to test your own progress.

Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Document No. Issued by: NTTA

Page II of XIV

 



When you are ready, ask your trainer to watch you perform the activities outlined in this module. As you work through the activities, ask for written feedback on your progress. Your trainer keeps feedback/ pre-assessment reports for this reason. When you have successfully completed each element, ask your trainer to mark on the reports that you are ready for assessment. When you have completed this module (or several modules), and feel confident that you have had sufficient practice, your trainer will arrange an appointment with registered assessor to assess you. The results of your assessment will be recorded in your competency Achievement Record.

Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Document No. Issued by: NTTA

Page III of XIV

COMPETENCY BASED LEARNING MATERIALS COMPUTER SYSTEMS SERVICING NC II

LIST OF COMPETENCIES No

Unit of Competency

Module Title

Code

BASIC COMPETENCIES 1

Participate in Workplace Participating in Workplace Communication Communication

500311105

2

Work in Environment

500311106

3

Practice Professionalism

4

Practice Occupational Practicing Occupational Health and Safety Health and Safety Procedures Procedures

a

Team Working in Environment

a

Career Practicing Professionalism

Team Career

500311107

500311108

COMMON COMPETENCIES 1

Apply Quality Standards

2

Perform Operations

3

Perform Mensuration and Performing Mensuration Calculation and Calculation

ELC311201

4

Prepare and Interpret Preparing and Interpreting Technical Drawing Technical Drawing

ELC311202

5

Use Hand Tools

ELC724201

6

Terminate and Connect Terminating Electrical Wiring and Connecting Electronic Circuits Wiring and Circuits

and Electrical Electronic

Test Components

Electronic

7

Applying Quality Standards

Computer Performing Operations

Computer

Using Hand Tools

Electronic Testing Components

Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

ELC315202 ELC311203

ELC724202

ELC724205

Document No. Issued by: NTTA

Page IV of XIV

CORE COMPETENCIES 1

Install and Configure Computer Systems

Installing and Configuring Computer Systems ELC724331

2

Set-up Computer Networks

Setting-up Networks

Computer

3

Set-up Computer Servers

Setting-up Servers

Computer

4

Maintain Computer Networks

and Repair Maintaining and Repairing Systems and Computer Systems and Networks

Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

ELC724332 ELC724333

ELC724334

Document No. Issued by: NTTA

Page V of XIV

Table of Contents HOW TO USE THIS COMPETENCY-BASED LEARNING MATERIAL ….……...I RECOGNITION OF PRIOR LEARNING ……………………………………………….I LIST OF COMPETENCY ………………………………………………………………..IV TABLE OF CONTENTS …………………………………………………………………VI MODULE CONTENT ………………………………………………………….………..VII COMPETENCY SUMMARY ………………………………………………..……….….X Learning Outcome 03……………………………………………….…………………………..XII

LEARNING EXPERIENCES …………………………………………………..……...XV LO No. 3 Install operating system and drivers for peripherals/device..…………….XV

INFORMATION SHEET No. 1.3-1a Operating Systems………….….……...……1 Objectives ………………………………………………………………………….………………..1 What is an Operating System …………………….………………………..…………………..1 Types of Operating System………………………………………………………………….…...1 Microsoft Windows……….………..……………………………………………………………...2 MAC OS ………….. ………………………………………….……………………….…...……..2 LINU …………………….. ……………..…………………………………………………..……..2 Network Operating System …………..…………………………………………………..……..2 SELF-CHECK No. 1.3-1a ……………………………………………………….……………...4 ANSWER KEY No. 1.3-1a ………………………………….……………………….………….5

INFORMATION SHEET No. 1.3-1b System Requirements ………………………..6

Objectives……….…………………………………………………………………….……….…….6 What are the system Requirements.…………………………….…………………………….6 Windows System Requirements …………………………………..…………………..……..6 MAC OS Requirements Solutions …………………………………………..…….……..…. 7 LINUX System Requirements ……………..…………………………………..……….……. 8 SELF-CHECK No. 1.3-1b ……………………………………………………………………...9 ANSWER KEY No. 1.3-1b ……………………………….………………….………………..10

INFORMATION SHEET No. 1.3-1c Established Installation Procedure..……11 Objectives ……………………………………………………………………………………...…11 Installing Procedure Terminologies …………………….…………………..………….……11 Operating System Installation using Portable Device ……..…………………………... 12 SELF-CHECK No. 1.3-1c ……………………………………………………………….…....23 ANSWER KEY No. 1.3-1c ……………………………….…………………………………...24 OPEARTION SHEET No. 1.3-1 Computer Operation …….…………..………………….25 PERFORMANCE CRITERIA CHECKLIST No. 1.3-1c ………….…………………………26

Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Document No. Issued by: NTTA

Page VI of XIV

TASK SHEET No. 1.3-1c Installing Operating System – Windows 7 ……..…27 PERFORMANCE CRITERIA CHECKLIST No. 1.3-1c ………….……………………..…28 TASK SHEET No. 1.3-1d Installing Operating System – Windows Server….29 PERFORMANCE CRITERIA CHECKLIST No. 1.3-1d ………….……………………..…30 INFORMATION SHEET No. 1.3-2a Peripheral Devices ….……………………..31

Objectives ………………………………………………………………………………………...31 What is Peripheral Device? ………….…………………………………….…………….…….31 Types of Peripheral Device ………………….…….……..…………………………………....31 How Do I Connect Peripheral Devices to my Computer?…………………….………….32 SELF-CHECK No. 1.3-2a …………………………..……………………………….………...33 ANSWER KEY No. 1.3-2a …………………………………………………..…………..…….34

TASK SHEET No. 1.3-2a Install Printer………… ………………………………...35 PERFORMANCE CRITERIA CHECKLIST No. 1.3-2a ……………………………36 INFORMATION SHEET No. 1.3-2b Installing Device Drivers ………………...37

Objectives ……………………………………………………………………………………...…37 What is device drivers? ………….……………………………………..……………………...37 How to Install Device Drivers?………………….…….……..………………….…………....37 SELF-CHECK No. 1.3-2b …………………………..…………………………………………42 ANSWER KEY No. 1.3-2b ……………………………………………………….…..….…….43

TASK SHEET No. 1.3-2b Installing the Downloaded Device Driver ………...44 PERFORMANCE CRITERIA CHECKLIST No. 1.3-2b ……………………………45 TASK SHEET No. 1.3-2c Installing Device Driver using DriverPack Solution.44 …………………………………………………………….….46 PERFORMANCE CRITERIA CHECKLIST No. 1.3-2c ……………………………47 INFORMATION SHEET No. 1.3-3 Install Operating System and Drivers Updates…………………...........................................................48 Objectives ………………………………………………………………………………………..48 Updating Operating System…………….………………………………….………………....49 Updating Drivers………………….…….………………….…..…………….………………....50 SELF-CHECK No. 1.3-3 …………………………..…………………………………..……...51 ANSWER KEY No. 1.3-3 …………………………………………………………..….…..….52

TASK SHEET No. 1.3-3 Installing Operating system and Drivers updates ................................................................................53 PERFORMANCE CRITERIA CHECKLIST No. 1.3-3 …………………….………54 JOB SHEET No. 1.3-4 Install Operating System and Drivers for peripherals/devices..........................................................54 PERFORMANCE CRITERIA CHECKLIST No. 1.3-4 …………………….……...55 Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Document No. Issued by: NTTA

Page VII of XIV

MODULE CONTENT Learning Outcomes Assemble computer hardware

Prepare Installers

Installing operating system and drivers for peripherals/ devices

Progress

Learning Contents

Check

Training Duration

Plan and prepare unit assembly

 Written Test  Demonstration  Oral Questioning

1.5 hrs.

Identify and obtain materials

 Written Test  Demonstration  Oral Questioning

1.5 hrs.

Obtain tools, equipment and testing devices needed

 Written Test  Demonstration  Oral Questioning

1.5 hrs.

Assemble computer hardware

 Written Test  Demonstration  Oral Questioning

1.5 hrs.

Perform Basic-Input-  Written Test Output-System  Demonstration Configuration  Oral Questioning

1.5 hrs.

Create bootable device

 Written Test  Demonstration  Oral Questioning

2.5hrs.

Prepare Customized installer

 Written Test  Demonstration  Oral Questioning

2.5hrs.

Carry out installation

 Written Test  Demonstration  Oral Questioning

2.5hrs.

 Written Test  Demonstration  Oral Questioning

2hrs.

Install operating system

Install and configure  Written Test peripherals/devices  Demonstration Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

2hrs.

Document No. Issued by: NTTA

Page VIII of XIV

 Oral Questioning Access and install OS and  Written Test drive’s updates/patches  Demonstration  Oral Questioning

2hrs.

of  Written Test  Demonstration  Oral Questioning

2hrs.

Undertake checking quality work Install application software

Install application software

 Written Test  Demonstration  Oral Questioning

2.5 hrs.

Carry out variation to application software

 Written Test  Demonstration  Oral Questioning

2.5 hrs.

install  Written Test  Demonstration  Oral Questioning

2.5 hrs.

Access and software updates. Conduct testing and documentation

Test devices/system and/or installation

 Written Test  Demonstration  Oral Questioning

2hrs.

Conduct stress test

 Written Test  Demonstration  Oral Questioning

2hrs.

Follow 5S and 3Rs

 Written Test  Demonstration  Oral Questioning

2hrs.

Forward documentation

 Written Test  Demonstration  Oral Questioning

2hrs.

Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Document No. Issued by: NTTA

Page IX of XIV

COMPETENCY SUMMARY Unit of Competency

: Install and Configure Computer System

Module Title

: Installing and Configuring Computer System

Module Descriptor

: This unit covers the outcomes required in installing and configuring desktop and workstation computers systems. It consists of competencies to assemble computer hardware, install operating system and drivers for peripherals/devices, and install application software as well as to conduct testing and documentation.

Nominal Duration

: 40 Hours

Learning Outcomes

: At the completion of the module, the trainees must be able to:

LO1. Assemble computer hardware LO2. Prepare installer LO3. Install operating system and drivers for peripherals/devices LO4. Install application software LO5. Conduct testing and documentation Assessment Criteria: 1. Unit assembly is planned and prepared to ensure OH&S policies and procedures are followed in accordance with systems requirements. 2. Materials necessary to complete the work are identified and obtained in accordance with established procedures and checked against systems requirements. 3. Tools, equipment and testing devices needed to carry out the installation work are obtained in accordance with established procedures and checked for correct operation and safety. 4. Computer hardware is assembled in accordance with established procedures and systems requirements.

Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Document No. Issued by: NTTA

Page X of XIV

5. Basic-input-output-system (BIOS) configuration is performed in accordance with hardware requirements. 6. Portable bootable devices are created in accordance with software manufacturer instruction. 7. Customized installers are prepared in accordance with software utilization guide and end user agreement. 8. Installation of portable applications are carried out in accordance with software user guide and software license. 9. Operating system (OS) is installed in accordance with established installation procedures and to comply with end-user requirements. 10. Peripherals/devices drivers are installed and configured in accordance with manufacturer’s instructions and/or OS installation procedures. 11. OS and drivers updates/patches are accessed and installed in accordance with manufacturer’s recommendations and requirements. 12. On-going checks of the quality of the work are undertaken in accordance with established procedures. 13. Application software are installed based on software installation guides, end-user requirements and software license agreement. 14. Variation to application software installation is carried out in accordance to customer/client requirements. 15. Software updates are accessed and installed in accordance with manufacturer’s recommendations and requirements. 16. Devices / systems and/or installation is tested to determine whether it conforms to requirements. 17. Stress test is conducted to ensure reliability of equipment in accordance with manufacturer’s instructions and system requirements. 18. 5S and 3Rs are followed according to environmental policies. 19. Documentation in relation to the test is forwarded to appropriate personnel and/or authority in accordance with requirements.

Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Document No. Issued by: NTTA

Page XI of XIV

QUALIFICATION

: Computer Systems Servicing NC II

UNIT OF COMPETENCY

: Install and Configure Computer System

MODULE TITLE

: Installing and Configuring Computer System

MODULE DESCRIPTOR

: This unit covers the outcomes required in installing and configuring desktop and workstation computers systems. It consists of competencies to assemble computer hardware, install operating system and drivers for peripherals/devices, and install application software as well as to conduct testing and documentation.

NOMINAL DURATION

: 40 Hours

SUMMARY OF LEARNING OUTCOMES: LO1. Assemble computer hardware LO2. Prepare installer LO3. Install operating system and drivers for peripherals/devices LO4. Install application software LO5. Conduct testing and documentation DETAILS OF LEARNING OUTCOMES: LO3. Install operating system and drivers for peripherals/devices Assessment Criteria Operating system (OS) is installed in accordance with established installation procedures and to comply with end-user requirements

Contents Install operating system

Conditions Tools: Laptop, Projector, CD/Portable Bootable Device (USB) Equipment: PC and Workstation

Methodologies  Self-paced/ Modular  Lecture/ discussion  Demonstration s

Materials/ Supplies: CBLM Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Assessment Methods  Written Examinatio n (Formative)  Demonstrat ion with Oral Questionin g  Interview

Document No. Issued by: NTTA

Page XII of XIV

Instruction Sheets Peripherals/de vices drivers are installed and configured in accordance with manufacturer’ s instructions and/or OS installation procedures

Install and Configure peripherals /devices

Tools: Laptop, Projector, Installer of Drivers (Software)

OS and drivers updates/patch es are accessed and installed in accordance with manufacturer’ s recommendati ons and requirements

Access and install OS and drivers updates/p atches

On-going checks of the quality of the work are undertaken in accordance

Undertake Tools: checking of Laptop, quality Projector work Equipment: PC and Workstation

Equipment: PC and Workstation Materials/ Supplies: CBLM Instruction Sheets

 Self-paced/ Modular  Lecture/ discussion  Demonstration s  Video/Multime dia Presentation

Tools: Laptop, Projector, Installer of Drivers Update(Softw are)

 Self-paced/ Modular

Equipment: PC and Workstation

 Video/Multime dia Presentation

 Lecture/ discussion  Demonstration s

 Written Examinatio n (Formative)  Demonstrat ion with Oral Questionin g  Interview

 Written Examinatio n (Formative)  Demonstrat ion with Oral Questionin g  Interview

Materials/ Supplies: CBLM Instruction Sheets

Computer Systems Servicing NCII Install and Configure Computer Systems

 Self-paced/ Modular  Lecture/ discussion  Demonstration

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

 Written Examinatio n (Formative)  Demonstrat ion with

Document No. Issued by: NTTA

Page XIII of XIV

with established procedures

Materials/ Supplies: CBLM Instruction Sheets

Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Oral Questionin g  Interview

Document No. Issued by: NTTA

Page XIV of XIV

LEARNING EXPERIENCES Learning Outcome No. 3 Install operating system and drivers for peripherals/devices Learning Activities

Special Instructions

1. Install operating system         

Read Information Sheet No. 1.3-1a, Operating System Answer Self check No. 1.3-1a, Operating System Compare answer to Answer Key No. 1.3-1a Read Information Sheet No. 1.3-1b Answer Self-Check No. 1.3-1b Compare answer to Answer Key No. 1.3-1b Read Information Sheet No. 1.3-1c Answer Self-Check No. 1.3-1c Compare answer to Answer Key No. 1.3-1c Perform Operation Sheet No. 1.3-1 Refer to Performance Criteria Checklist No. 1.3-1 Perform Task Sheet No. 1.3-1c Refer to Performance Criteria Checklist No. 1.3-1c

You are required to go through a series of learning activities in order to complete each learning content. Information Sheets consist of learning contents that you need to learn. Each Information Sheet has a learning objective that you need to attain while reading the Information Sheet. After each Information Sheet is a Self-Check that will help you test yourself if you have attained the learning objectives. Compare your answer to the corresponding Answer Key. You must answer all the questions correctly before proceeding to the next activity

Assignment, Operation, Task and Job Sheets are activity sheets that will help you practice the skills previously discussed in the  Information Sheets or demonstrated by your trainer. A Performance  Criteria Checklist is provided which  will allow for self-evaluation or peer evaluation. This Performance 2. Install and Configure Criteria may be used by your trainer Peripherals/Devices to evaluate your performance.  Read Information Sheet No. Follow these activities on your own. When you are ready, present your 1.3-2a work to your trainer for final  Answer Self check No. 1.3-2a  Compare answer to Answer Key evaluation and recording, if you have questions, don’t hesitate to ask No. 1.3-2a  Perform Task Sheet No. 1.3-2a your trainer for assistance.  Refer to Performance Criteria Checklist No. 1.3-2a  Read Information Sheet No. 

Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Document No. Issued by: NTTA

Page XV of XIV

     

1.3-2b Answer Self Check No. 1.3-2b Compare answer to Answer Key No. 1.3-2b Perform Task Sheet No. 1.3-2b Refer to Performance Criteria checklist No. 1.3-2b Perform Task Sheet No. 1.3-2c Refer to Performance Criteria Checklist No. 1.3-2c

3. Access and install OS and Drivers updates/patches     

Read Information Sheet No. 1.3-3 Answer Self-Check No. 1.3-3 Compare answer to Answer Key No. 1.3-3 Perform Task Sheet No. 1.3-3 Refer to Performance Criteria Checklist No. 1.3-3

4. Undertake work

checking

of

quality



Perform Job Sheet No. 1.3-4



After completion and compliance of all the learning activities of this LO you are ready to proceed to the next LO on Install Application Software.

Computer Systems Servicing NCII Install and Configure Computer Systems

Date Developed: March 2018 Date Revised: Developed by: Lara Jane M. Leal

Document No. Issued by: NTTA

Page XVI of XIV