Complete Lube Handbook

Lubricant Handbook

2008

1-877-NO1-FUEL (1-877-661-3835) www.ufapetro.com

July 2006

UFA Lubricant Warranty UFA Warranty Approved Lubricants Performance and Quality Guaranteed Each UFA Lubricant is formulated to exceed those Original Equipment Manufacturers’ (OEM) performance specifications identified on its container. When you select the UFA Lubricant to match your OEM’s performance specifications, UFA guarantees its performance so long as used in accordance with OEM usage recommendations. UFA assumes full responsibility for any equipment damage directly attributable to a correctly selected UFA Lubricant when OEM usage recommendations for the lubricant and the equipment have been followed. The UFA Lubricant Performance Guarantee is in addition to any equipment hardware performance warranty provided by your OEM. The UFA Performance Guarantee is confirmation of UFA’s commitment to high standards of product quality and customer satisfaction.

UFA is an authorized distributor of Chevron lubricants. 

Lubricant Handbook UFA’s Lubricant Handbook is a guide to oils, lubricants and other automotive products available at our over 110 Petroleum locations and 35 Farm and Ranch Supply stores. It provides brief and concise information on the technical properties and typical uses of UFA’s lubricants, fuels and special products. Information printed in the Lubricant Handbook is current at the time of publication. Product data may change at any time. At UFA choose from an assortment of products designed for the lubricant requirements of automotive, agriculture and industrial equipment in varied climatic conditions. Some products and grades are available by special order only. For more information about the products available at UFA, please contact your nearest UFA Petroleum Agency or Farm and Ranch Supply store, or visit our website at www.ufa.net.



Petroleum Locations

Fort Nelson

High Level La Crete

Manning Worsley

Fort St. John

Hines Creek

Peace River Wabasca

Bay Tree Dawson Creek

Grimshaw

Spirit River

La Glace

Fairview

Sexsmith Beaverlodge

Falher

Wanham

Grande Prairie

High Prairie Valleyview Cold Lake (AWR)

Athabasca Fawcett

Fox Creek

Westlock Mayerthorpe Wildwood Edson

Fort Saskatchewan

Two Hills

Spruce Grove

Leduc

Millet

Sylvan Lake

Carstairs Airdrie

Killam

Lloydminster

Paradise Valley Wainwright Edgerton

Lacombe Forestburg Alix Stettler Red Castor Deer Delburne

Eckville

Vermilion

Mannville

Camrose

Bawlf Wetaskiwin Ponoka Bashaw

Buck Lake Rimbey

Innisfail Olds

Dewberry

Vegreville Tofield Salisbury

EDMONTON Warburg

UFA Petroleum Locations

Elk Point

Spedden

Onoway Morinville

Drayton Valley

Rocky Mountain House

Glendon

Smoky Lake

Barrhead

Lougheed Czar Provost Coronation Consort

Trochu Delia Hanna Three Hills Beiseker Drumheller Rockyford Dalum Strathmore Standard

Youngstown Cereal

Kindersley

Oyen

CALGARY Brooks

Milo High River Nanton Claresholm Fort Macleod

Vulcan

Swift Current

Lomond

Nobleford Picture Butte

Medicine Hat Taber

Lethbridge

Bow Island



TABLE OF CONTENTS UFA & CHEVRON PRODUCTS

PAGE

Engine Oils UFA Super..................................................................................................................................... 7 UFA Polar Plus............................................................................................................................ 10 UFA Extra HD............................................................................................................................... 12 Mobil 1........................................................................................................................................... 15 UFA Prona – Natural Gas Engine Oil..................................................................................... 17 UFA 2 Cycle Synthetic Blend Engine Oil.............................................................................. 19 Chevron Delo® 400 Synthetic (5W-40)..............................................................................20 Chevron Delo® LE 400 Multigrade (15W-40).....................................................................22 Chevron Supreme 100% Synthetic Motor Oils................................................................. 24 Chevron Supreme Motor Oils................................................................................................26 Chevron HDAX® – Gas Engine Oils....................................................................................... 27

Gear & Transmission Oils UFA MP Gear Oil......................................................................................................................... 31 UFA THG Fluid – Tractor Fluid ...............................................................................................33 UFA Transmission & Drivetrain – TO-4 Fluid......................................................................37 Chevron Drive Train Fluid - MP..............................................................................................39 UFA ATF D/M................................................................................................................................40 Chevron Synthetic ATF Heavy Duty.....................................................................................42 Chevron Multi Vehicle ATF......................................................................................................43 Chevron ATF+4 Automatic Transmission Fluid.................................................................45 Chevron Automatic Tranmission Fluid Dexron®..............................................................47 Mobil 1 Synthetic Gear Lubricant 75W-90.......................................................................... 51 Chevron RPM® Synthetic Gear Lubricant...........................................................................52 Chevron RPM® Synthetic Transmission Fluid ..................................................................54 Chevron Synthetic All-Weather THF....................................................................................55 Chevron Gear Compund EP....................................................................................................57 Anderol Synthetic Pumpjack 150..........................................................................................59

Hydraulic Oils UFA Hydraulic XL.......................................................................................................................62 Chevron Rykon Oil AW ISO 46................................................................................................64 Chevron Rykon Premium Oil 32............................................................................................66

Industrial R & O Oils Chevron GST® Oils.....................................................................................................................69



continued...

UFA & CHEVRON PRODUCTS

PAGE

Greases UFA Lubetron Greases.............................................................................................................72 Chevron Rykotac® Grease EP.................................................................................................73 Chevron Ulti-Plex® Synthetic Grease EP............................................................................. 74 PRODUCTS............................................................................................PAGE

Rock Drill Oil UFA Rock Drill Oil....................................................................................................................... 76

Chain Oils UFA Chain Oils............................................................................................................................78

Water Soluble Lubricant UFA Hydrosol..............................................................................................................................80

Compressor Cylinder & Rod Oil Chevron Compressor Oil 260.................................................................................................82 Antifreeze and Coolants.....................................................................................................84 Filters..........................................................................................................................................86 Fuel Tanks..................................................................................................................................88 Batteries.................................................................................................................................... 91

APPENDIX Glossary.......................................................................................................................................93 Kinematic Viscosity Comparison Chart..............................................................................97 NLGI Grease Grade Definitions..............................................................................................98 SAE Engine Oil Viscosity Grade Definitions.......................................................................99 SAE Gear Oil Viscosity Grade Definitions..........................................................................100 ISO Viscosity Grade Definitions............................................................................................101 Conversion Factors.................................................................................................................. 102



Engine Oil



UFA SUPER ENGINE OILS

Premium multi-service engine oils designed for severe duty diesel and gasoline engines. Performance Benefits include: · Oxidation and thermal stress protection, longer oil life · Deposit control · Soot control, high dispersancy · Base number retention, corrosion protection · Wear protection, longer bearing life · Stay-in-grade viscosity shear stability · Low temperature fluidity of multigrade and 10W grades · Filterability · Foam control · Seal compatibility · Extended drain capabilities with UFA Oil Analysis Program

Applications include: For 15W-40 grade · API service CJ-4, CI-4, CI-4 Plus (diesel) and all earlier designations · Mack EO-N Premium Plus 3, Mack EO-O Premium Plus and all earlier designations · Cummins CES 20081, CES 20077, CES 20078, M-11EGR · ACEA E5, E7 · Volvo VDS-3, VDS-4 · Cat TO-2 · API SL (gasoline) and all earlier designations · GM6094M · Ford M2C153-E · Vickers 35VQ25 hydraulics · Global DHD-1 · Caterpillar ECF-1a, 2, 3 · Daimler - Chrysler 228.3 · Detroit Diesel 7SE 270 (4-stroke)



For 10W-30 · API Service CJ-4, CI-4 (diesel) and all earlier designations · Mack EO-M Plus · Cat TO-2 · API SL (gasoline) and all earlier designations · GM6094M, Ford M2C153-E · Vickers 35VQ25 hydraulics · Caterpillar ECF-1 · Cummings CES 20078 · DDC 7SE 270 (4-stroke) · Volvo VDS

For 30, 40 and 50 · API Service CF and all earlier designations. 4 stroke (diesel). · API Service CF-2 (2 stroke diesel) and all earlier designations. · Mack EO-K/2 and all earlier designations · MIL-L-2104F / G diesel engine oil (30 grade only) · Cat TO-2, Allison C-4, C-3 transmissions (30 grade only) · API SL(gasoline) and all earlier designations · GM6094M · Vickers 35VQ25 hydraulics

For 10W · Cat TO-2 · MIL-L-2104F / G diesel engine oil · Vickers 35VQ25 hydraulics

Plus use (of the appropriate grade) in: · Mobile hydraulics · Pump crankcases · Small, low discharge pressure reciprocating air compressors · Light duty (non EP) gear boxes. Not to be used in bevel, hypoid or worm gears



Properties

UFA SUPER ENGINE OILS

Grades Available 10W 30 40 50 10W-30 Density, Kg/m3 877 888 890 894 869 Viscosity, cSt 40°C 39 102 137 203 78 100°C 6.5 12.0 14.3 18.3 11.8 Viscosity Index 120 108 102 99 147 CCS Viscosity, cP - 25°C 4,220 — — — 6,600 - 20°C — — — — 3,400 MRV Viscosity, cP -30°C 11,100 — — — 32,000 -25°C — — — — — MRV, LPT, °C -38° — — — -34° Pour Point, °C -39° -24° -15° -9­° -33° Expected Low Ambient Temp, °C — — — — -25° Acid Number 1.2 1.2 1.2 1.2 2.8 Base Number 8.2 8.2 8.2 8.2 8.6 Sulphated Ash. %wt 1.0 1.0 1.0 1.0 0.99 UFA Package Sizes & Product # 5L - 5L - 5L - 20L- 1L - 166607, 166643, 878054 440339 440776, drums - drums - 5L - 440687 440758 158689, 20L - 912631, drums - 440767,

15W-40 873 110 15.0 142 — 6,300 — 28,900 — -30° -20° 2.8 8.6 0.99 1L- 317927, 5L - 158705, 20L 812758, 110L 777706, drums 440785, bulk - 896454



UFA POLAR PLUS ENGINE OILS

Premium synthetic, multi-service engine oils designed for diesel and gasoline engines operating in colder climates. Performance Benefits include: · Advanced polyalphaolefin (PAO) full synthetic base oil technology · Ultimate cold temperature fluidity - down to -40° C. · Oxidation and thermal stress protection, longer oil life · Deposit control · Soot control, high dispersancy · Base number retention, corrosion protection · Wear protection, longer bearing life · Stay-in-grade viscosity shear stability · Filterability · Foam control · Seal compatibility

Applications include: · Turbo-charged, supercharged and naturally aspirated diesel and gasoline engines

For 0W-30 grade · API service CI-4 (diesel) and all earlier designations. It is not API CF-2 or CD-2. · Mack EO-M Plus and all earlier designations · Cat TO-2 · API SL (gasoline) and all earlier designations · GM6094M · Ford M2C153-E · Vickers 35VQ25 hydraulics · Cummins CES 20078 · DDC 7SE 270 (4-stroke)

For 0W-40 · API Service CI-4 (diesel) and earlier designations. It is not API CF-2 or CD-2. · Will meet requirements and proposed designations beyond CH-4 · Mack EO-M Plus and earlier designations · Cummins CES 20076, CES 20078 · Cat TO-2

10

· API SL (gasoline) and earlier designations · DDC 7SE 270 (4-stroke) · GM6094M · Ford M2C153-E · Vickers 35VQ25 hydraulics

Plus use (of the appropriate grade) in: · Mobile hydraulics · Pump crankcases · Small, low discharge pressure reciprocating air compressors · Light duty (non EP) gear boxes. Not to be used in bevel, hypoid or worm gears

Properties

UFA POLAR PLUS ENGINE OILS

Grades Available Density, Kg/m3 Viscosity, cSt 40°C 100°C Viscosity Index CCS Viscosity, cP - 30°C MRV Viscosity, cP - 40°C - 35°C MRV, LPT, °C Pour Point, °C Expected Low Ambient Temp, °C Acid Number Base Number Sulphated Ash. %wt UFA Package Sizes & Product #

0W-30 850

0W-40 851

71 12.1 168

94.5 15.7 178

5,900

5,900

22,600 11,200 -46° -48° -40° 2.5 12.2 1.49 1L – 417365 5L – 678029 20L – 512083 110L – 805855

28,600 14,900 -45° -48° -40° 2.5 12.2 1.49 5L – 221888 20L – 223813 110L – 266937 205L – 553939

11

UFA EXTRA HD ENGINE OILS

Premium heavy duty engine oils designed for severe gasoline and moderate duty diesel engines for mixed fleets. Performance Benefits include: · Oxidation protection for longer oil life · Deposit control, engine cleanliness · Wear protection, longer bearing valve train, and lifter life · Filterability · Foam control · Good low temperature performance (5W-30, 10W-30) · Warranty approved for most passenger cars · Catalyst compatible multigrades · Fuel economy · Turbo charger protection

Applications include: For 5W-30 and 10W-30 grades · API SM (gasoline) and all earlier designations · ILSAC GF-4 and all earlier designations · Energy conserving · Turbocharger protection · Engines also using propane and natural gas fuels · Not intended for use in diesel engines · GM6094M · Ford ESE-M2C153-G, Ford WSS-M2C205-A · Chrysler MS 6395 · CID-A-A52039A

For 10W-40 grade · API SL (gasoline) and all earlier designations · Energy conserving · Turbocharger protection · Engines also using propane and natural gas fuels · Not intended for use in diesel engines · Ford ESE-M2C153-E, Ford WSS-M2C205-A · Chrysler MS6395G

12

Plus use (of the appropriate grade) in: · Mobile hydraulics · Pump crankcases · Small, low discharge pressure reciprocating air compressors · Light duty (non EP) gear boxes. Not to be used in bevel, hypoid or worm gears

13



UFA EXTRA HD ENGINE OILS

Properties Grades Available 5W-30 Density, Kg/m3 859 Viscosity, cSt 40°C 63.2 100°C 10.7 Viscosity Index 160 CCS Viscosity, cP - 30°C 5200 - 25°C — MRV Viscosity, cP - 40°C 53,500 - 35°C 18,500 - 30°C — Pour Point, °C - 33° Base Number 7.5 Sulphated Ash. %wt 0.8 UFA Package Sizes & Product # 1L – 912622, 5L – 166420, drums – 835537

14

10W-30 869

10W-40 873

66.4 10.4 144

99.3 14.5 151

5600

5900

— 50,400 18,900 - 30° 7.5 0.8

— 55,000 21,300 - 30° 8.0 1.0

1L – 166457, 5L – 166466, 110L – 752652, drums – 440669

5L – 166509

MOBIL 1 (5W30 & 0W40)

Mobil 1 motor oils are the most advanced performace synthetic engine oils designed to provide superior cleaning power and wear protection due to the unique combination of synthetic base fluids and Supersyn Antiwear Technology. Performance Benefits include: · Active cleaning agents to control deposits and sludge build-up to enable long and clean engine life. · Outstanding thermal and oxidation stability to reduce oil aging allowing extended drain interval protection. · Optimized frictional properties to provide excellent fuel economy. · Excellent low temperative capabilities for quick cold weather starting, fast protection, and extended engine and electrical system life. · High Viscosity Index and the Supersyn Antiwear Technology for excellent overall lubrication and wear protection performance for all driving styles.

Applications include: Mobil 1 5W30 or 0W40 is recommended for all types of light-duty modern vehicles, including high performance turbo-charged, supercharged gasoline and diesel multi-valve fuel injected engines found in passenger cars, SUVs, light vans and trucks. · ACEA A1, B1, A5, B5 · API SM, SL, SJ, EC, CF · ILSAC GF4 Mobil 1 5W30 has the following builder approvals: · General Motors Service Fill GM4718M · General Motors Service Fill GM9986176 Mobil 1 0W40 has the following builder approvals: · BMW LL-01 · Daimler Chrysler 229.3/229.5 · Opel Long Life Service Fill GM-LL-A-025 · Opel Diesel Service Fill GM-LL-B-025 · Porsche Approved · Volkswagen 502.00/505.00, 503.01

15



MOBIL 1 TYPICAL PROPERTIES

Properties MOBIL 1 SAE Grade 5W30 0W40 Viscosity, ASTM D 455 cST @ 40°C 56 80 cST @ 100°C 10 14.3 Viscosity Index, ASTM D 2270 167 187 Sulphated Ashm wt%, ASTM D 874 1.2 1.2 HTHS Viscosity, mPa-s @ ASTM D 4683 3.08 3.6 Pour Point, °C, ASTM D 97 -45º -54º Flash Point, °C, ASTM D 92 224 236 Density @ 15°C Kg/l, ASTM D 4052 0.861 0.855 1L – 547607 1L – 547616 1L – 547625

16

UFA PRONA NATURAL GAS ENGINE OIL Premium natural gas engine oil for stationary industrial engines. Performance Benefits include: · High antiwear/antioxidant formulation · Low ash formulation reduces deposits · Ashless dispersant for deposit prevention · Oxidation protection, longer oil life · High SAE 30 viscosity covers a wide range of applications · Guard against piston scoring, scuffing and cylinder wear

Applications include: · Turbo-charged and naturally aspirated natural gas fueled engines · Not recommended for engines with catalytic converters · Ingersoll Rand Category I, II and III approved · Worthington® · M.E.P. Fairbanks Morse 2 cycle · For mobile applications see UFA Extra HD oils

Plus use (of the appropriate grade) in: · Natural gas compressor crankcases · Natural gas compressor cylinder, under specific conditions · Pump crankcases · Small, low discharge pressure reciprocating air compressors · Light duty (non EP) gear boxes. Not to be used in bevel, hypoid or worm gears.

17



UFA PRONA NATURAL GAS ENGINE OIL Properties Grades Available Ash Level, % Viscosity, cSt 40°C 100°C Viscosity Index Pour Point, °C Acid Number Base Number Sulphated Ash. %wt Zinc, ppm Phosphorous, ppm Calcium, ppm UFA Package Sizes & Product #

18

30 Low ash - 0.3 117 12.1 90 -21° 2.0 3.0 0.30 1,200 1,100 0 5L - 120032, drums – 440721

UFA 2 CYCLE SYNTHETIC BLEND ENGINE OIL Premium synthetic blend, 2 cycle gasoline engine oil. Performance Benefits include: · Formulated with synthetic base oils · Ashless formulation · Low smoke standards - JASO FC & FB, API TC · Deposit control, port plugging · Corrosion protection · Reduces pre-ignition · Control plug fouling · Wear and scuffing protection, longer engine life

Applications include: · Water and liquid cooled engines requiring NMMA TC-W3® oils · Outboards and snowmobiles · SAE FM 4, snowmobile protection to –40°C · Oil injection and pre-mix applications up to 100:1 · API TC · JASO FB and JASO FC



UFA 2 CYCLE SYNTHETIC BLEND ENGINE OIL Properties Colour Viscosity, cSt 40°C 100°C Pour Point, °C Flash Point, °C UFA Package Sizes & Product #

Blue 29 6.0 -42° 80° 1L - 152541

19

CHEVRON DELO® 400 SYNTHETIC (5W-40) MOTOR OIL Super premium 100% synthetic, multi-service engine oil designed for all severe duty diesel and gasoline engines operating in colder climates. Performance Benefits include: · Formulated with 100% full synthetic base oils · Oxidation and thermal stress protection, longer oil life · Deposit control · Soot control, high dispersancy · Base number retention, corrosion protection · Wear protection, longer bearing life · Shear stable viscosity index improvers · Foam control · Seal compatibility · Easier cold weather starting

Applications include: · Diesel engine using either high or low sulfur fuel · API service CI-4 Plus (diesel) and all earlier designations · Mack EO-N Premium Plus 03 and all earlier designations · Cummins CES 20078, 20076 & 20071 · API SL (gasoline) and all earlier designations

Plus use (of the appropriate grade) in: · Torque converters · Mobile hydraulics · Pump crankcases · Small, low discharge pressure reciprocating air compressors · Light duty (non EP) gear boxes. Not to be used in bevel, hypoid or worm gears.

20





CHEVRON DELO® 400 SYNTHETIC MOTOR OIL

Properties Grades Available Density, Kg/m3 Viscosity, cSt 40°C 100°C Viscosity Index CCS Viscosity, cP - 25°C Pour Point, °C Base Number Sulphated Ash. %wt UFA Package Sizes & Product #

5W-40 868 96.6 15.6 172 3,150 -43° 12.5 1.50 3.8L - 64520, 18.9L - 715462, drums – 15833

AT LAST! Mixed Fleet = One Oil . . . Year Round

21

CHEVRON DELO® 400 LETM MULTIGRADE (15W-40) Specifically formulated for new low emission engines with ULSD (2007 engines and beyond). It is also fully compatible with previous API Oil Service Categories and engine models. Performance Benefits include:

· Reduced operating costs — Exceptional soot dispersancy and wear control. · Enhanced emission control system life. · Extends Diesel Particulate Filter (DPF) life for less frequent downtime and cleaning. · Optimizes the exhaust gas recirculation system life decreasing your maintenance costs. · Reduced inventory costs ­­— Backwards compatible with all previous API Oil Service Categories and engine models. · One oil for all services, in four-stroke gasoline and all naturally aspirated turbocharged and modern electronically controlled /low emission diesel engines. · One oil that meets the engine performance requirements of North American and European engine manufacturers. · Chevron Delo® 400 LE SAE 15W40 is formulated with ISOSYN® base stocks, which rival synthetics in critical engine tests, and an optimal blend of the latest technology in dispersant, detergent, oxidation inhibition, anitwear, corrosion inhibition, viscosity improver, and defoaming additives. · Chevron Delo® 400 LE SAE 15W40 has been specifically designed to meet the demand of EGR engines while at the same time providing the highest level of performance in conventional engines and other engine technologies like Caterpillar ACERTTM . · Chevron Delo® 400 LE SAE 15W40 keeps rings clean and free for better combustion pressure and to provide minimal wear. Reduces valve and piston crown land deposits, thus lowering oil consumption. Its high level of ashless dispersants keeps fuel soot in suspension and thus avoids filter plugging, heavy viscosity increase and oil gelling. These problems can result in excessive engine wear and bearing failure on startup, without prior indication to the operator. · Its unique blend of extreme pressure antiwear additive protects against valve train wear and scuffing of highly loaded parts operating under boundary lubrication. A specially selected viscosity index improver ensures easy flow at low temperatures and excellent film protection in hot engine areas. A defoaming additive prevents air entrapment.

22

Applications include:

· API Service Categories CJ-4, CI-4 PLUS, CI-4, CH-4, CF, SM, SL · ACEA European Service Categories E-7 · Major diesel engine manufactures' requirement for Caterpillar, Cummins, Detroit Diesel, Mack, Man, Mercedes, Volvo · Engine test performances requirements Caterpillar ECF-3, Cummins CES 20081, DDC Power 93K218, Mack EO-O Premium Plus 07, Man 3275, Mercedes Benz 228.3 and Volvo VDS-4



CHEVRON DELO® 400 LETM MULTIGRADE

Properties Grades Available Density, kg/m3 Viscosity, cSt 40°C 100°C Viscosity Index CCS Viscosity, cP - 20°C Pour Point, °C Flash Point, °C Suphur, wt% Base Number Sulphated Ash. %wt Phosphorous, WT. % Zinc, WT. % UFA Package Sizes & Product #

15W-40 881 125 15.7 131 6,400 -30° 204 0.32 9.6 1.0 0.12 0.13 1L - 85280, 3.8L - 251809 18.9L - 262487, 205L - 782451 Bulk - 71932

23

CHEVRON SUPREME 100% SYNTHETIC MOTOR OILS Premium 100% synthetic, multi-service engine oils designed for all gasoline and light duty diesel engines operating in colder climates. Performance Benefits include: · 100% synthetic base oil technology · Ultimate engine protection · Excellent cold starting · Oxidation and thermal stability · Deposit control · Wear protection · Longer engine life · Seal compatibility · Controls sludge · Clean engines and emission systems

Applications include: · All four stroke gasoline engines

For 5W-30 grade · API SM, SL (gasoline) and all earlier designations · ILSAC GF-3, GF-4 · Energy Conserving · API CF moderate duty diesel · GM 4718M (Corvette) · GM6094M · Ford WSS M2C929-A · Chrysler MS 6395H · Japanese JASO VTW · Peugeot TU 3M scuff test · Volvo SMB 22-3

24

Plus use (of the appropriate grade) in: · Mobile hydraulics · Pump crankcases · Small, low discharge pressure reciprocating air compressors · Light duty (non EP) gear boxes. Not to be used in bevel, hypoid or worm gears



CHEVRON SUPREME 100% SYNTHETIC MOTOR OILS Properties Grades Available Density, Kg/m3 Viscosity, cSt 40°C 100°C Viscosity Index CCS Viscosity, cP -30°C Pour Point, °C Base Number Sulphated Ash. %wt UFA Package Sizes & Product #

5W-30 851 59.9 10.6 167 3700 -36° 8.2 0.8 1L – 15824

25

CHEVRON SUPREME MOTOR OIL

Quality engine oil designed for all gasoline engines. Performance Benefits include:

· Oxidation and thermal stress protection, longer oil life · High dispersancy deposit control · Wear protection, longer bearing life · Stay-in-grade viscosity shear stability · 5W20 provides optimum fuel economy and durability for Ford, Daimler · Foam control Chrysler and Honda vehicles · Protects against corrosion

Applications include:

· Most mobile and stationary, gasoline engines including those operating in heavy duty hauling/towing, racing and rally driving including power boats and motorcycles · ILSAC GF-4 · API SM, SL (gasoline) and earlier designations · USDA H2 (no food contact) · Japanese (JASO) valve train weave · Ford M2C930A (5W20 only)

Plus use (of the appropriate grade) in: · Light duty (non EP) gear boxes. Not to be used in bevel, hypoid or worm gears



CHEVRON SUPREME MOTOR OIL

Properties Grades Available Density, Kg/m3 Viscosity, cSt 40°C 100°C Viscosity Index CCS Viscosity, cP - 15°C - 30°C Pour Point, °C Base Number Sulphated Ash. %wt UFA Package Sizes & Product #

5W-20 864

20W-50 882

45.5 8.0 148

176 19.0 122

5,200 -33° 8.3 0.9 1L - 264252

8,000 -29° 7.4 0.9 1L - 957101

* Chevron Supreme Motor Oil (20W50) has not been qualified for use in diesel engines

26

CHEVRON HDAX® GAS ENGINE OILS Premium natural gas engine oils for stationary industrial engines Performance Benefits include: · Ashless and Low Ash formulations · Formulated with ISOSYN™ base oils · Rivals synthetics in critical engine performance · 15W-40 multigrade provides better low temperature starting · Oxidation protection, longer oil life · Wear protection, longer engine life · Deposit control, detergent and dispersant additives · Base number retention, corrosion protection · Wear protection, longer engine life · Valve recession protection · NSCR catalyst compatible

Applications include: · Turbo-charged and naturally aspirated natural gas fueled engines

For Ashless formulation · Primarily intended for all two cycle natural gas engines including Ajax®, Clark-Dresser, Cooper-Bessemer, Fairbanks Morse/MEP, Worthington® · Plus, Caterpillar (except 3400, 3500, 3600) · Worthington® 2 stroke · Waukesha® Clinton series and VR · Dresser Rand (Ingersole Rand) Categories I and II

For Low Ash grade · Primarily intended for four cycle engines · Caterpillar (including 3400, 3500, 3600) · Waukesha® · Superior® · Cooper-Bessemer, Delaval Enterprise, Worthington® · Plus 2 cycle, Ajax®, Clark-Dresser, Fairbanks Morse/MEP, Worthington® · Excellent choice for facilities where several engines with different ash requirements (ashless to medium ash) must be supplied from one tank (oil supply) · Check specific engine manufacturers that endorse 15W-40 multigrade use. · Engines operating on gas from digester and landfill sources · API CD / CF

Plus use (of the appropriate grade) in: · Natural gas compressor crankcases · Natural gas compressor cylinder, under specific conditions · Pump crankcases · Small, low discharge pressure reciprocating air compressors · Light duty (non EP) gear boxes. Not to be used in bevel, hypoid or worm gears

27



CHEVRON HDAX® GAS ENGINE OILS

Properties Product Name HDAX Ashless /Ash Level Grades Available 40 875 Density, Kg/m3 Viscosity, cSt 40°C 134 100°C 13.5 Viscosity Index 95 CCS Viscosity, cP -20°C — Pour Point, °C -18° Base Number 3.1 Sulphated Ash. %wt Nil Zinc, ppm <10 Phosphorous, ppm 670 Calcium, ppm 0 UFA Package Sizes & Product # Drums - 822783, Bulk - 229728

HDAX Low Ash

HDAX Low Ash

40 878

15W-40 873

124 13.5 104

126 15.6 130

— -18° 4.2 0.5 320 270 1100 20L - 354217 Drums - 865120, Bulk - 229719

6,400 -27° 4.2 0.5 320 270 1100 20L - 354217 Drums - 274018

Natural Gas Engine Oil Recommendations UFA Chevron Prona HDAX® 30 Ashless 40 Properties Ajax® 2 stroke A R Caterpillar 3400, 3500, 3600 All others A A Clark-(Dresser) 2 stroke A R Copper-Bessemer 2 stroke R

28

Chevron HDAX® Low Ash 40

Chevron HDAX® Low Ash 15W-40

A

A

R R A

Natural Gas Engine Oil Recommendations

Properties UFA Chevron Prona HDAX® 30 Ashless 40 Cummins Most Models B & C Models Delaval-Enterprise A R Dresser-Rand Clark 2 cycle

Dresser-Rand Category I R Category II R Category III R Fairbanks Morse/ MEP R White Superior® Naturally Aspirated A GT Turbo, 1700, 2400 Waukesha® VHP Series VGF Series VSG Series AT25GL / AT27GL Worthington® 2 stroke R R 4 stroke R A

Chevron HDAX® Low Ash 40

Chevron HDAX® Low Ash 15W-40

A A

R R

R

R R R R R R R R R R A R

R = Recommended, A = Acceptable

29

Gear & Transmission Oils

30

UFA MP GEAR OILS Multipurpose full EP mineral gear oils. Performance Benefits include: · High load carrying capacity · Non corrosive · Filterability · Thermal and oxidation stability · Foaming resistance · Seal compatibiltiy · High viscosity index 75W-90 grade for low temperature use · Score Protection · Storage stability

Applications include: · Industrial gear applications · All but the most severe automotive manual transmissions, final drives, differentials · GL-5 · API MT-1 (for manual transmissions) · For trucks, farm tractors, construction and industrial equipment calling for API Service GL-3, GL-4 and GL-5 · Worm gear drives and axles · Can be used in AGMA EP applications · These oils should not be used in automatic or power shift transmissions, hydrostatic drives, wet brake and clutch applications or where GL-6 is specified

For 75W-90 · Should not be used in manual transmissions and transaxles specifying GL-4, GL-6 or a specific OEM oil

For 80W-90 and 85W-140 · Mack GO-J · MIL-PRF-2105E

31



UFA MP GEAR OILS

Properties Grades Available 75W-90 Density, 896 Kg/m3, 15°C Viscosity, cSt 40°C 92 100°C 15.8 Viscosity Index 184 Brookfield Viscosity, cP -40°C 80,000 -26°C -12°C — — Pour Point, °C -45° Channel Point, °C <-45° UFA Package Sizes & Product # 5L - 417347, 20L – 763551 205L - 214039

32

80W-90

85W-140

887

894

146 15.8 111

347 27.4 105

90,000 — — -27° <-35°

60,000 -15° <-20°

5L – 158867, 20L – 450201, 110L - 776155, drums - 912169

5L - 158901, 20L - 440874

UFA THG FLUIDS Multipurpose - Transmission, Hydraulic, Gear (THG) tractor fluids. Performance Benefits include: · Antiwear and extreme pressure gear protection · Corrosion protection · Extended oil life · Friction control for wet brake · Anti-rust and corrosion protection and clutch applications · Long oil life to oxidation and · Oxidation stability thermal break down inhibitors · Foaming resistance · Low temperature fluidity · Seal compatibility · Brake noise suppression

Applications include: · Farm, construction and off-highway equipment · Where one fluid is recommended for wet brake, wet clutch, hydraulics, hydrostatic and power shift transmissions, differentials and final drives · John Deere J20C/D, JDQ95 Gear Test, JDQ84 Axial Piston Pump Test · New Holland · Belarus · Case / International · Claas · Massey Ferguson 4-Square Gear Test · Clark · Allis, Duetz-Allis · JCB · White / Oliver / Minneapolis Moline · Komatsu · Kubota · Valmet · Versatile · Universal · Hesston-Fiat · Sunstrand · Steiger · Rockwell Transmissions · Caterpillar TO-2 · Mitsubishi · Vickers 35VQ25 hydraulics · Leyland · Volvo WB-101 Friction · Landini · CRC L-20 Gear Test · Eaton Hydraulics

For “Special” · Lighter grade for lower temperature operating range · Oil operating range of -35°C to 70°C

For “Ultra” · Heavier grade for summer use · Oil operating range of -25°C to 80°C

33



UFA THG FLUIDS

Properties UFA Product Name Special ISO Grades Available 32 877 Density, Kg/m3, 15°C Viscosity, cSt 40°C 32 100°C 7.2 Viscosity Index 201 Brookfield Viscosity, cP -40°C 14,600 -35°C 6,300 -25°C 1,800 Pour Point, °C -51° Timken OK Load, kg 6 Oil Operating Range, °C -35 to 70° UFA Package Sizes & Product # 5L - 119990, 110L – 776146



34

Ultra 46 / 68 882 53 9.5 166 140,000 48,000 8,500 -39° 7 -25 to 80° 5L – 119981, 20L – 811456, 110L - 527362, drums – 440883,

Specification

CHEVRON SYNTHITIC



Product

THG ULTRA

THG SPECIAL

ALL WEATHER THF



Operating Temperature

-25 to 80C

-35 to 70C

-35 to 100C



Season

Summer

Winter

All Season

Agco Including: Agco-Allis, Allis-Chalmers, Deutz-Allis Power Fluid 821XL (current) X X Power Fluid 821 X X 272843, 257541, 246634 X X Allison -C-2,C-3,C-4” X X Case (now part of CNH) Including: International Harvester, Case-IH, Steiger MS-1209 (current), MS1207 (Hytran Plus) X X MS-1205 (TFD II), MS1204 (TFD) X X MS-1206 (Powergard PTF) X X MS-1210 (TCH) X JIC 143/144/145 X X JIC 185 X X B-5, B-6 (International Harvester) X X SEMS 1700A (Steiger) X X Caterpillar - TO-2 X X Denison Including: ABEX HF-0,HF-1,HF-2 (current) X X Hesston, Hesston-Fait (tractor only) AF-87 (current) X X Multi-F X X John Deere J20 C, Formerly J20A (Hy-Gard) X J20 D, formerly J20B (Low Vis Hy-Gard) X J14 B (303 fluid) X X J14 C X J21 A X Quatrol X X Kubota - UDT (Current) X X

X X X X

X X X X X X X X X

X X X X X X X X X X

35

Specification

CHEVRON SYNTHITIC



Product

THG ULTRA

THG SPECIAL

ALL WEATHER THF



Operating Temperature

-25 to 80C

-35 to 70C

-35 to 100C



Season

Summer

Winter

All Season

Massey-Ferguson (now part of Agco) M-1135 (current), M1141 (current) (Permatran III) X X M-1143 (Current) X X M-1110 X M-1127 A/B X X M-1129A (Permatran) X X New Holland (now part of CNHI) Including: Ford, Sperry-Vickers, Versatile, New Holland, Fiat CNH MAT 3525 X X CNH MAT 3526 FNHA-2-201 (“134D” Fluid) (current) X X FNHA-2-C 200A (“200A” Fluid) (current) FNHA-2-C-200 (“200” Fluid) ESN-M2C134-A/B/C/D X X ESN-M2C86-A/B/C,ESN-M2C53-A/B X X ESN-M2C48-A/B/C, ENS-M2C43 X X ESN-M2C41-B X ESN-M2C92-A X X Specification 23M or 24M (Versatile) X X I-286-S (Vickers) X X M-2950-S (Vickers) X X Renk Doromat - 873, 874 A/B (current) X X White Farm Equipment Including: Minneapolis-Moline, Oliver, New Idea (now part of Agco) Q-1826 (current) X X Q-1766 (Q-1722), Q-1766B X X Q-1705 X X Q-1802 X X Type 55 X X

36

X X X X X

X X X X X X X X X X X X X X

X X X X X

UFA TRANS & DRIVETRAIN TO-4 OILS Caterpillar TO-4 transmission and drivetrain oil. Performance Benefits include: · Specifically designed to be compatible with materials used in Caterpillar transmissions · Friction control for clutch applications · Optimum torque transfer · Antiwear protection · Corrosion protection · Oxidation stability · Foaming resistance · Provides optimum protection for final drives, transmissions, torque converters, wet brakes, hydraulics, hoists and combination systems in Caterpillar and other OEM equipment including Case and Komatsu

Applications include: · Caterpillar, Case and Komatsu · Transmissions, hydraulics, final drives, torque converters and wet brakes of off-highway (farming, logging, construction, mining) equipment · Caterpillar TO-4, also TO-2 · Allison C-4 · GL-3 · Komatsu Micro-Clutch Fluid · Separate hydraulic systems, Vickers 35VQ25 performance · For application temperature range for each grade see the Properties Table

For “30” · API CD diesel engine performance, although other UFA products are recommended

For “Extra” · Multi-season performance as this is a OW-20 grade

37



UFA TRANS & DRIVETRAIN TO-4 OILS

Properties Grades Available 10W 30 Viscosity, cSt 40°C 38 101 100°C 6.1 11.4 Brookfield Viscosity, cP -40°C -35°C 50,000 -25°C 80,000 Pour Point, °C -39° -27° Low Temperature Pumping, D4684, °C -36° -24° Operating Temp Range, °C For Powershift Transmission -20 to +10° 0 to +35° Hydraulics -20 to +40° +10 to +50° Final Drive -30 to 0° -20 to +25° Final Drives of off-highway trucks, large wheel loaders & tractors -30 to -10° -20 to +15° UFA Package Sizes & Product # 205L - 784806 20L - 784798 20L - 784718 205L - 939471

38

Extra 32.9 7.5 7,000

-54° -53° -45 to +30º -45 to +40º -45 to +10º

-45 to +0° 20L - 673015

CHEVRON DRIVE TRAIN FLUID - MP Performance Benefits include: · Lower operational cost, eliminating seasonal oil changes and saving operational costs · Smoother operation · Longer oil life · Manufactured using a unique blend of Group II and synthetic base stocks — plus additive technology · Designed for both newly developed and older model drive train components · Compatible with new and traditional seal and clutch materials

Applications include: · Caterpillar transmissions, wet brakes, Allison Powershift transmissions, torque converters, and hydraulic systems requiring a fluid meeting Allison C4 or · Caterpillar TO-4 or TO-4M requirements · Lightly loaded final drives — making inventory consolidation possible · Heavy duty off highway automatic transmissions

CHEVRON DRIVE TRAIN FLUID - MP

Properties Density, Kg/m3 Viscosity, Kinematic cSt at 40°C cSt at 100°C Viscosity, Saybolt SUS at 100°F SUS at 210°F Viscosity Index Flash Point, °C(°F) Pour Point, °C(°F) Mini-Rotary Viscometer cP at -20°C cP at -30°C UFA Package Sizes & Product #

877 106 14.0 546 75 134 270 -39 8400 32,000 208L - 277603

39

UFA ATF D/M Premium, multipurpose automatic transmission fluid. Performance Benefits include: · Wear protection · High VI, wide operating temperature range · High temperature thermal and oxidation stability · Frictional characteristics designed for automatic transmission clutch materials · Low temperature flow · Controlled volatility · Seal compatibility · Corrosion control · Reduced foaming

Applications include: · Most automatic, powershift and hydrostatic transmissions · Many manual transmissions including heavy duty units during winter when a 10W, 20W-20 or 5W-20 is specified · GM Dexron® III and all earlier Dexron designations · Ford Mercon® · Ford M2C-138CJ, M2C-166H · Ford Type A Suffix A · Not an older Ford Type F fluid · Not recommended where newer Chrysler MS 7176E is required. · Allison C-4 · Caterpillar TO-2 · Detroit Allison V700 series, including V7300 · Voith approval, G607 · Always refer to the owners manual or dipstick for specific information about your vehicle · Most hydraulic systems, Vickers 35VQ25 pass, Sundstrand axial piston pumps specs, Rachine, Denison and others. Gear, vane and piston pumps. · Oil flooded rotary vane and screw compressors specifying an ISO 32 grade oil · Mercedes Benz 236.1

40

Properties ISO Grade Colour Density, Kg/m3, 15°C Viscosity, cSt 40°C 100°C Brookfield Viscosity, cP -40°C -35°C -30°C -20°C Pour Point, °C UFA Package Sizes & Product #

UFA ATF D/M 32 red 855 37 7.3 17,000 8,000 3,300 1,000 -48° 1L – 159045, 5L – 159072, 20L – 912640, 110L – 776119

41

CHEVRON SYNTHETIC ATF HEAVY DUTY Performance Benefits include: · Extended drains of up to four times that of a conventional automatic transmission fluid · Protection against the formation of lacquers, sludge or other harmful deposits · Exceptional stability · Fast circulation during cold weather · Optimized friction characteristics for smooth shifting and efficient power transfer · It is manufactured from synthetic base oils and additives that provide oxidation and thermal stability, friction control, load-carrying ability, corrosion and wear protection

Applications include: · Meets the performance requirements of Allison TES-295 for severe duty and extended drain intervals · Specially engineered for heavy duty automatic truck and bus transmissions operating in extended service · Acceptable for use in passenger car applications requiring Ford MERCON® Mercon V® or General Motors DEXRON®-III · Allison C-4 · C-4 31662005 · ZF (for extended drain intervals) · Voith G607

CHEVRON SYNTHETIC ATF HEAVY DUTY

Properties Density, Kg/m3 Viscosity, Kinematic cSt at 40°C cSt at 100°C Viscosity, Saybolt SUS at 100°F SUS at 210°F Viscosity, Brookfield cP at -40°C Viscosity Index Flash Point, °C(°F) Pour Point, °C(°F) Colour FZG Gear Wear Test, Failure Load Stage UFA Package Sizes & Product #

42

848 35.3 7.4 179 51 11,400 183 216 -45 Red 12 18.9L - 642647

CHEVRON MULTI-VEHICLE ATF Performance Benefits · Longer equipment life - Advanced formula protects against wear, corrosion, and the formation of lacquers, sludge, or other harmful deposits. · Longer oil life - Premium base oil and extra oxidation inhibitors result in Increased oil service life. · Smoother operation - Carefully chosen friction modifiers allow for smooth shifting, efficient power transfer, and anti-shudder protection. It is suitable for service fill of many transmissions manufactured by North American, Asian, and European OEMs. Compared to conventional ATFs, Chevron Multi-Vehicle ATF has exceptional low temperature flow properties and enhanced protection against viscosity breakdown at high temperatures. It also has superior oxidation and thermal stability, resulting in longer service life. · Maintains friction control for smooth shift action and prevention of shudder. · Greatly extends the time to transmission overhauls due to sludge, corrosion, or wear of gears, bearings, and clutches.

Applications include Chevron Multi-Vehicle ATF is recommended for all applications that call for the former DEXRON®2-III H fluid and for MERCON® V and Allison C-4 fluids. It has passed the performance test requirements of ZF and Voith. Chevron Multi-Vehicle ATF is suitable for service fill or the vast majority of vehicles made in North America. It will also work well in many Japanese, Korean, and European vehicles such as those made by Acura, BMW, Daewoo, Honda, Hyundai, Infiniti, Isuzu, Mitsubishi, Nissan, Saab, Subaru, Suzuki, Toyota, Volkswagen, and Volvo. Allison Transmission

C4-316320052005

Ford MERCON V

M5050901

Voith

G607

ZF

TE-ML 14B

Chevron Multi-Vehicle ATF has been tested for performance in Japanese transmissions under the JASO 1A ATF standard.

43

CHEVRON MULTI-VEHICLE ATF (Cont.) CHEVRON MULTI-VEHICLE ATF Properties



Density, Kg/m3

863

Viscosity, Kinematic cST at 40ºC cST at 100ºC

37.6 8.4

Viscosity, Saybolt SUS at 100ºF SUS at 210ºF

189 54

Viscosity, Brookfield cP at -40ºC

12,100

Viscosity Index

210

Flash Point, ºC

180

Pour Point, ºC

-45

Colour

Red

UFA Package Sizes & Product #

1L - 6-42610

Typical test data are average values only. Minor variations which do not affect product performance are to be expected in normal manufacturing.

44

CHEVRON ATF+4® AUTOMATIC TRANSMISSION FLUID Performance Benefits · Warranty coverage as an officially approved Chrysler® Group fluid. · Correct viscosity and frictional characteristics to ensure smooth operation in Chrysler transmissions. · Extended drain intervals of at least 100,000 miles under normal operating conditions. · Long-lasting viscosity modifiers for longer fluid life. Chevron ATF+4® Automatic transmission Fluid is formulated with high purity synthetic base stocks. It is designed to maintain its viscosity through excellent oxidation stability. Chevron ATF+4 Automatic Transmission Fluid: · Lubricates and prevents wear in gears, clutches, and bearings · Transfers engine power effectively · Removes heat efficiently · Operates well over a wide temperature range · Resists thermal and oxidative breakdown · Provides sufficient viscosity at high temperatures with minimal shear down · Protects seals, gaskets, and other nonferrous components · Prevents sludge and varnish formation · Resists foaming

Applications include Chevron ATF+4 Automatic Transmission Fluid is designed for use in all Chrysler Group automatic transmissions and automatic transaxles where a Mopar ATF PLUS®, ATF+2®, ATF+3® or ATF+4® fluid is specified. The Chrysler Group includes Chrysler, Dodge, Plymouth, Jeep and Eagle vehicles. Chevron ATF+4 Automatic Transmission Fluid has been registered with the Chrysler Corporation, license number 406300335.

45

CHEVRON ATF+4® AUTOMATIC TRANSMISSION FLUID Properties

46

Density, Kg/m3

848

Viscosity, Kinematic cST at 40ºC cST at 100ºC

33.24 7.51

Visocity, Brookfield cP at -40ºC

8,380

Viscosity Index

204

Flash Point, ºC

198

Pour Point, ºC

-51

Colour

Red

UFA Package Sizes & Product #

1L- 6-42610

CHEVRON AUTOMATIC TRANMISSION FLUID DEXRON®-VI Performance Benefits · Warranty coverage as an officially approved General Motors fluid. · Improved durability of viscosity and frictional properties to ensure smooth operation in General Motors transmissions. · Extended drain intervals of at least 100,000 miles under normal operating conditions. · Back serviceability to cover all earlier DEXRON® recommendations. Chevron Automatic Transmission Fluid DEXRON®-VI is formulated with high purity synthetic base stocks. It is designed to maintain its viscosity through excellent oxidation stability and use of long lasting viscosity modifiers. Chevron Automatic Transmission Fluid DEXRON®-VI: · Maintains friction control forsmooth, consistent shifting · Prevents clutch shudder in torque converters · Improves fuel economy relative to previous DEXRON® fluids because of lower vicious drag and outstanding low temperature pumpability. · Practically eliminates transmission overhauls due to sludge, corrosion, and wear · Operates well over a wide temperature range · Resists thermal and oxidative breakdown · Provides sufficient viscosity at high temperatures with minimum sheardown · Protects gears, bearings, clutch plates, seals, bushings and other components from wear and detrition · Resists foaming and thereby gives better operability and longer equipment life

47

Applications include Chevron Automatic Transmission Fluid DEXRON®-VI is designed specifically for use in all General Motors HydraMatic tranmissions produced for Model Year 2006 and beyond. It is the latest generation technology approved for use by General Motors in automatic tranmissions and automatic transaxles where a DEXRON®-VI fluid is specified. It is also back serviceable in transmissions calling for DEXRON®-III or DEXRON®-II fluids. Chevron Automatic Transmissions Fluid DEXRON®-VI meets General Motors specification GMN10060 and has been registered with license number J60308.

CHEVRON AUTOMATIC TRANMISSION FLUID Properties Density, Kg/m3

846

Viscosity, Kinematic cST at 40ºC cST at 100ºC

29.8 6.0

Visocity, Brookfield cP at -40ºC

12,030

Viscosity Index

151

Flash Point, ºC

206

Pour Point, ºC

-54

Colour

Red

UFA Package Sizes & Product #

48

6-64230

ATF Specification

Chevron Multi-Vehicle ATF

Esso Type LT 71141 ATF

√

DEXRON -II

√

DEXRON -III

√

® ®

Other ATF

√ √

ATF+3

A

ATF+4®*

A

Ford Type-F

B

Ford Type-G

C

Allison C-4

√

MERCON

√

MERCON V

√

MERCON® SP

√

® ®

Allison TES-295

UFA ATF D/M

√

D

Honda ATF-Z1

√

Idemitsu K17

√

Isuzu Genuine

√

Nissan Matic J

√

Nassan Matic K

√

Shell 3403

D

A. USe Chevron ATF+4® Automatic Tranmission Fluid B. Use Chevron ATF Type F C. Use Chevron ATF Type F – for non-severe duty D. Use Chevron Synthetic Automatic Transmission Fluid Heavy Duty * ATF+4 is a registered trademark of Daimler Chrylser Corporation.

49

ATF Specification

Chevron Multi-Vehicle ATF

Shell ATF M-1375.4

√

Shell LA2634

√

Mitsubishi SP-II

√

Mitsubishi SP-III

√

Texaco 7045-E

√

Texaco ETL-8072 B

√

Texaco N402

√

Toyota Type WS

√

Other ATF

VW G 052 990 (A2)

D

Synthetic MERCON

D

®

Volvo Part #1161540-8

√

Audi part # G 052 025-A2

√

Toyota JWS 3309/ Type T-IV

√

Toyota Type-T

√

A. USe Chevron ATF+4® Automatic Tranmission Fluid B. Use Chevron ATF Type F C. Use Chevron ATF Type F – for non-severe duty D. Use Chevron Synthetic Automatic Transmission Fluid Heavy Duty * ATF+4 is a registered trademark of Daimler Chrylser Corporation.

50

UFA ATF D/M

MOBIL 1 SYNTHETIC GEAR LUBRICANT 75W-90 Performance Benefits include: Mobil 1 Synthetic Gear lubricant 75W-90 combines wax-free synthesized hydrocarbon base oils and a specially designed extreme-pressure limit-slip sulphur-phosphorous additive system to provide a significantly higher level of performance in rear axles and differentials versus conventional fluids. Great film strength at high operating temperatures, reduced fluid friction and low-temperature application down to 50ºC provides significant advantages versus conventional mineral oil formulations. It reduces wear and spalling under the high speed, high torque and high horsepower conditions in competitive racing and high performance automobiles. This high technology final drive gear lubricant has demonstrated outstanding performance.

Applications include: · Mobil 1 Synthetic Gear lubricant 75W-90 is recommended for use in modern high performance automobiles like SUV's, Vans, and Light duty trucks requiring API GL-5 and MT-1 level performance. · Mobil 1 Synthetic great Lubricant 75W-90 is intended for initial fill, topping-off or refilling differentials, final drives, transfer cases and other gear applications where lubricants meeting, API Service GL-5 and multi-purpose or mild EP gear lubricants are recommended. · Mobil 1 Synthetic Gear MOBIL 1 SYNTHETIC GEAR Lubricant 75W-90 can also be LUBRICANT 75W-90 used in rear axles where API Service GL-4 lubricant is Properties recommended SAE Grade 75W-90 · Not recommended for automatic, manual or Viscosity, ASTM D 445 semiautomatic tranmissions cSt at 40ºC 106 for which engine oil or CSt at 100ºC 15.2 automatic transmission Viscosity Index, ASTM D 2270 150 fluids are recommended. Pour Point, ºC, ASTM D 97 -46 · Where extended service intervals and warranties are Flash Point, ºC, ASTM D 92 175 required. Density at 15ºC kg/l, ASTM D 4052 0.859 UFA Package Sizes & Product #

1L- 6-65319

51

CHEVRON RPM® SYNTHETIC GEAR LUBRICANT

Premium full synthetic automotive axle and differential gear oil for Dana, Eaton and Meritor extended warranty. Performance Benefits include: · Full synthetic base oil formulation to provide extremely broad operating temperature range · Full EP gear protection · Wide operating temperature range · Excellent thermal and oxidation stability · Shear stability · Seal compatibility · Contains limited-slip additive · Extended drain capabilities

Applications include: · On-road, off-road rear axles and differentials · Dana, Eaton and Meritor 750,000 mile extended warranty approved · Eaton PS-163 factory fill 500,000 mile drain · Dana Corporation / Spicer Axle Division ­­— SHAES 256 · GL-5 · MT-1 · Mack GO-J · Industrial gear applications requiring a full EP, ISO 100 viscosity grade · Meritor 0-76N Extended Drain · SAE J2360 (Formerly MIL-PRF-2105E)

52



CHEVRON RPM® SYNTHETIC GEAR LUBRICANT Properties Grades Available Density, Kg/m3, 15°C Viscosity, cSt 40°C 100°C Viscosity Index Pour Point, °C Channel Point, °C Flash Point, °C UFA Package Sizes & Product #

75W-90 865 110 15.2 145 -48° -51° 192 18.9L – 161504, drums – 907816

53

CHEVRON RPM SYNTHETIC TRANSMISSION FLUID 50 (SAE)

Premium full synthetic automotive transmission oil for Eaton extended warranty. Performance Benefits include: · Full synthetic base oil formulation - extended drain capabilities · Excellent gear protection · Wide operating temperature range · Shear stability · Excellent thermal and oxidation stability

Applications include: · Heavy duty truck manual transmissions including Eaton Roadranger, Arvin Meritor and Mack · Extremely cold environments · Eaton 750,000 mile extended warranty approved · Eaton Transmission Division PS-164 spec · Industrial gear applications requiring a non-EP, ISO 100 or 150 viscosity grade · Not an engine crankcase oil



CHEVRON RPM® SYNTHETIC TRANSMISSION FLUID Properties Grade Available Density, Kg/m3, 15°C Viscosity, cSt 40°C 100°C Viscosity Index Pour Point, °C FZG Scott test, passing load stage UFA Package Sizes & Product #

54

SAE 50 873 141 18.3 144 -45° 12 18.9L – 161498

CHEVRON SYNTHETIC ALL-WEATHER THF Premium full synthetic Tractor Hydraulic Fluid (THF) Performance Benefits include: · Full synthetic base oil formulation · Wider operating temperature range, year-round performance · Reduced inventory and oil changes · Excellent thermal and oxidation stability, long oil life · Rust and corrosion protection · Stable high VI fluid provides excellent oil flow at low temperature and good oil film at high operating temperatures · Protects against scuffing and wear, long equipment life · Eliminates brake chatter and transmission slip · Seal compatibility · Compatible with other tractor, transmission, hydraulic fluids · Longer equipment life · Provides excellent shifting action · Allows for easy leak detection, due to orange color

Applications include: · Farm, construction and off-highway equipment where one fluid is recommended for wet brake, wet clutch, hydraulics, hydrostatic and power shift transmissions, differentials and final drives · John Deere J20C, J20D · Ford New Holland ESN-M2C134-D, FNHA-2-C-201, FNHA-2-C-200 · Case Corporation JIC-143, JIC-144, JIC-145, MS1206, MS1207, MS1209, MS1210 (TCH) · Massey Ferguson M1135, M1141, M1127, M1129A, M1143 · AGCO improved 821XL power fluid · Volvo - WB 101 · White Farm Equipment Q-1826 · ASTM D2882, High Pressure Vare · Minneapolis-Moline Fluids Pump Test, pass · Kubota UDT, Super UDT · Oliver type 55 · Renk bus automatic transmission fluid · International Harvester B6 · Caterpillar TO-2, MTO · Separate hydraulic systems, low pressure, Vickers 104C pass

55



CHEVRON SYNTHETIC ALL-WEATHER THF Properties Colour ISO Grade Available Density, Kg/m3, 15°C Viscosity, cSt 40°C 100°C Viscosity Index Brookfield Viscosity, cP -40°C Pour Point, °C UFA Package Sizes & Product #

56

Orange 46 / 68 852 44.7 9.5 204 17,000 -45° 18.9L – 65128, drums – 65137

CHEVRON GEAR COMPOUND EP

Recommended for all industrial enclosed gearing and wherever an AGMA extreme pressure lubricant is specified. Performance Benefits include: · High film strength — Gear teeth are protected from wear, surface distress, and premature failure by effective sulfur-phorphorous extreme pressure additives. · High stability ­— Minimal degradation even when operating in condition of oxidation and thermal stress. Gives long life in service. · Fast water separation — Separates quickly from water and resists forming permanent emulsions. · Designed for misting systems — Excellent oxidation stability prevents oil mist deposits. · Rust and corrosion inhibited — Reduces corrosion on either steel or nonferrous metals in gear sets. · Improved thermal and oxidation stability — Prevents degradation under severe operating conditions.

Applications include: · US Steel 224 · AGMA 9005 · Cincinnati Machine P-76 (ISO 100), P-74 (ISO 220) · Bijur oil application equipment · General Motors LS2 Specification LR for EP gear oils (ISO 220 only)

57

CHEVRON GEAR COMPOUNDS EP

Properties 68 AGMA Density, Kg/m3 Viscosity, Kinematic cST at 40°C cST at 100°C Viscosity, Saybolt SUS at 100°F SUS at 210°F Viscosity Index Flash Point, °C Pour Point, °C Timken OK Load, lb FZG Pass Stage, ASTM D 5182 UFA Package Size & Product #

58

100 3 EP 868

220 5 EP 890

95.0 11.0

209 18.8

495 64 100 225 -30 65 12 208L - 189030

1102 96 100 245 -21 65 12 18.9L - 428834

ANDEROL SYNTHETIC PUMPJACK 150

Solves premature wear, down time and inadequate flow in pump jacks operating in frigid temperatures. Performance Benefits include: · 5% reduced amperage required to drive gear boxes or at start-up. · 14% average energy savings due to increased operating efficiency (up to $2,000 per jack annually) · -40°C pumpability · Excellent oxidation and thermal stability · Extreme high and low operating temperature range · Lower maintenance costs · Excellent load carrying ability · Extended lubricant life (up to 5 years service life with proper maintenance and annual condition monitoring) · Improved cleanliness · Compatibility with paints, gaskets and seals · Excellent demulsibility · Resistance rust and corrosion · Reduced start-up torque

Applications include: · Designed for low temperature pump jack gearboxes · Can be used in screw type compressors · Suited for critical gear application

59

ANDEROL SYNTHETIC PUMPJACK 150

Properties Density, Kg/m3 Kinematic Viscosity, cST @40°C @100°C Viscosity Index Flash Point COC, °C Pour Point, ° Demulsibilty, W/O/E ml (at 82° in less than 30 minutes Foam, Sequenc el, ml Four Ball Wear, Scar, mm Water, ppm FZG Gear Test, Pass Stage Timken, OK Load, lbs. UFA Package Size & Product #

60

875 140.6 18.59 149 231 -51 40/40/0 Trace 0.45 <300 13 80 208L - 547750

Hydraulic Oils

61

UFA HYDRAULIC XL OILS Premium mineral oil based antiwear hydraulic oils. Performance Benefits include: · Wear protection · Oxidation and thermal stability · Hydrolytic stability · Corrosion protection · Foaming resistance · Demulsibility (water separation) · High viscosity index and shear stable “Low Temp” grade · Excellent filterability

Applications include: · All severe service, indoor and outdoor, stationary and mobile hydraulic systems · Gear, vane and piston pumps · Denison HF-0 and HF-2 approved · Vickers 35VQ25, 35VQ25A-1120 · Cincinnati Milacron P68 (ISO 32), P69 (ISO 68) · These oils should not be used in systems containing silver or silver alloy components

Plus use (of the appropriate grade) in: · Pump crankcases · Circulating systems · Light duty (non EP) gear boxes. Not to be used in bevel, hypoid or worm gears

Contamination by other oils may cause foaming and poor water separation.

62



UFA HYDRAULIC XL OILS

Properties LOW TEMP LIGHT ISO Grades Available 22 32 880 872 Density, Kg/m3, 15°C Viscosity, cSt 40°C 22 32.6 100°C 5.1 5.4 Viscosity Index 175 97 Pour Point, °C -54° -36° Flash Point, °C 156° 206° Nutralization Number — 0.40 Oxidation Stability TOST Life, hr 2500 + RBOT, minutes 350 UFA Package Sizes & Product # 5L - 512065, 5L - 120023, 20L - 440320, 20L - 825423, 110L - 807666, 110L - 776137, drums - 912178 bulk - 229693

HEAVY 68 878 68.8 8.7 97 -30° 222° 0.40 2500 + 325 5L - 120014, 20L 842583, 110L 776128,

The specific operating temperature range of each grade will depend on the type and make of pump and the operating pressure. For cold start-ups below –10°C (under load) use “Low Temp”.

63

CHEVRON RYKON OIL AW ISO 46 Chevron Rykon Oil is a superior quality hydraulic oil designed to give maximum hydraulic pump protection. Performance Benefits include:

· High oxidation stability · Rust and corrosion protection · Minimum viscosity change over a wide temperature range · Foam inhibition · Excellent antiwear properties · Passes all major pump manufactures requirements · Good stability in the presence of water · Excellent thermal stability · Fast water separation · Excellent filterability

Applications include:

· Eaton-Vickers 35VQ25A pump approval for M-2950-S (Mobile) and I-286-S (Stationary) · Denison HF-0/HF-2 · Bosch Rexroth approval as well as meeting pump manufacturer requirements of Racine Model S · Cincinnati Machine P-70 · General Motors LS2 Specification LH for antiwear hydraulic fluids.

64

CHEVRON RYKON OILS AW ISO 46

Properties ISO Grade Availabile AGMA GRADE Density, Kg/m3, Viscosity, Kinematic 40°C 100°C Viscosity, Saybolt SUS at 100°F SUS at 210°F Viscosity Index Flash Point, °C Pour Point, °C Oxidation Stability Hours to 2.0 mg KOH/g Acid number, ASTM D 943 UfA Package Size & Product #

46 1 866 43.7 6.5 225 48 97 226 -30 >6000 208L - 252764

65

CHEVRON RYKON PREMIUM OIL 32 Chevron Rykon Premium Oil is a high viscosity index hydraulic oil, which can be used over a wide temperature range. Performance Benefits include:

· High oxidation stability · Protection against rust and corrosion · High viscosity index · Foam inhibition · Excellent antiwear properties · Good stability · Fast water separation · Good filterability · Designed to give maximum protection to hydraulic pumps

Applications include:

· Vickers I-286-S, M 2950-S, 35VQ 25 · Racine Model S · Cincinnati Machine P 68 · Denison HF-0, HF02 · Chevron Rykon Premium 32 meet a dielectric strength of 35 kV (ASTM D 877)

66

CHEVRON RYKON PREMIUM OILS AW ISO 32 Properties ISO Grades Availabile Density, Kg/m3, Viscosity, Kinematic 40°C 100°C Viscosity, Saybolt SUS at 100°F SUS at 210°F Viscosity Index Flash Point, °C Pour Point, °C Oxidation Stability Hours to 2.0 mg KOH/g Acid number, ASTM D 943 Dielectric Strength, kV,ASTM D 877 UFA Package Size & Product #

32 859 32.0 6.3 163 47.4 153 220 -50 >6000 35 18.9L - 365526 208L - 365651

67

Industrial R & O Oils

68

CHEVRON GST® OILS Premium turbine oils. Performance Benefits include:

· Formulated with ISOSYN™ base oils, rivals synthetics · Oxidation and thermal stability · Hydrolytic stability (heat and water) · Rust and corrosion protection · Foaming resistance · Fast air release · Demulsibility (water separation) · Ashless · Non-toxic · Excellent hydraulic or air compressor lubricant · Ashless environmentally acceptable formulation

Applications include:

· Gas, steam and hydroelectric turbine bearings. · Marine reduction gears · USDA H2 (no food contact)

For 32 Grade

· GE GEK-32568F, GEK-28143A, GEK-27070, GEK-46506D · Siemens Westinghouse M spec 55125Z3, Siemens TLV901304 · Solar ES 9-224 direct drive, land installed gas and steam turbines · Cincinnati Lamb P38 · Alstom Power HTGD90117 · Ingersoll Rand specification for Centac Centrifugal Compressors · ASTM D4304, British Standard 489, and DIN 51515

For 46 Grade

· GE and Westinghouse marine gas turbines · Westinghouse reactor coolant pump motor bearings · ABB HTGD 90117 · Solar ES 9-224 direct drive, land-installed gas turbines · Cincinnati Lamb P55, Alstom Power · Alstom Power HTGD 90117 · ASTM D4304, British Standard 489 and DIN 51515

69

Plus use in:

· Pump crankcases · Circulating systems · Hydraulic systems up to 1,000 psi · Light duty (non EP) gear boxes. Not to be used in bevel, hypoid or worm gears · Air compressors requiring an R&O oil · Governors · Do not use in breathing air apparatus or medical equipment



CHEVRON GST® OILS Properties ISO Grades Available Density, Kg/m3, 15°C Viscosity, cSt 40°C 100°C Viscosity Index Pour Point, °C Oxidation Stability TOST Life, hr RBOT, minutes Flash Point, °C UFA Package Sizes & Product #

70

32 861

46 865

30.4 5.2 102 -36°

43.7 6.6 101 -36°

17,000 1,700 222 drums - 830658

12,000 1,400 224 drums – 822667

Greases

71

UFA LUBETRON GREASES Multipurpose Lithium Complex EP greases Performance Benefits include:

· Improved water resistance · Stable at high temperatures · Corrosion protection · Extreme pressure and wear load carrying protection · Good mechanical stability · “Winter” grade – for better low temperature dispensing · EP2 Moly – heavy base oil and polymer enriched adhesive formulation

Applications include:

· “Summer” - wheel bearings, universal joints, ball joints, clutch throw bearings, chassis fittings, electric motors, NLGI GC-LB · “Winter” best suited for higher speed motor bearings and dispensing from a grease gun at low temperatures, NLGI GC-LB · EP2 Moly, is intended for severe duty chassis lubrication of shock loaded bushings and bearings. Not for use on wheel bearings except in low speed off-highway summer applications.



UFA LUBETRON GREASES



Properties Product Name WINTER SUMMER EP2 MOLY Colour Blue Green Gray NLGI Grade # 1.5 #2 #2 Thickener Type Lithium Complex Lithium Complex Lithium Complex Base Oil Viscosity cSt at 40°C 89 268 460 cSt at 100°C 7.2 19.1 26 Dropping Point, °C 288° 288° 280° Operating Range, °C up to 150° -25° to 150° Min Dispensing Temp, °C +5° Timken OK Load, kg 23 25 27 4 Ball EP, kg Weld 315 400 500 LWI — 36 66 4 Ball Wear, mm — — 0.41 Water Spray Off, wt% — — 35 UFA Package Sizes Tubes - 523213 Tubes - 451683, Tubes- 864906 & Product # 17Kg Pail - 943037

72

CHEVRON RYKOTAC® GREASE EP Multipurpose, water resistant EP grease Performance Benefits include: · Tenacious adherence to metal · EP load carrying ability · Water resistant · Corrosion resistant, salt water rust protection · Resists fling-off · Balance of good cold weather and high temperature performance

Applications include: · Heavy duty construction equipment, cement industry, farming, mining, conveyor systems, paper mills, oil field operations · Fifth wheels, chain drives · Plain and antifriction bearings



CHEVRON RYKOTAC® GREASE EP

Properties Colour NLGI Grade Thickener Type Extracted Base Oil Viscosity cSt at 40°C cSt at 100°C Viscosity Index Dropping Point, °C Operating Range, °C Water Resistance, 79°C, % loss UFA Package Sizes & Product #

Red, Tacky # 2.5 (Between a #2 and #3) Polyurea 145 21 171 260 + -34 to 177° 2 Tubes – 807078, 35 lb pail – 816736, 120 lb keg – 857665

73

CHEVRON ULTI-PLEX® SYNTHETIC GREASE EP

Premium, synthetic multipurpose EP grease Performance Benefits include:

· High viscosity full synthetic base oil provides · Wear resistance, EP · Good cold weather pumpability · High temperature performance, oxidation inhibitors · Water resistant · Rust and corrosion protection · Tacky, resists fling-off · Low temperature lubrication down to -51°C

Applications include:

· Plain bearings (pins and bushings) and rolling element bearings · Extremely high and low temperature conditions · Used in paper and forest industries, mining, off-road construction, steel manufacture, marine deck equipment · Automatic lubrication systems · For extended lubrication intervals · Automotive chassis lube, NLGI “LB” · USDA H2, no food contact



CHEVRON ULTI-PLEX® SYNTHETIC GREASE EP Properties Colour NLGI Grade Thickener Type Extracted Base Oil Viscosity cSt at 40°C cSt at 100°C Viscosity Index Dropping Point, °C Low Temperature Pumpability, °C Operating Range, °C Timken OK Load, lb 4 Ball EP, kg Weld Load Wear Index, kg 4 Ball Wear, scar, mm Water Washout, 79°C, %wt loss UFA Package Sizes & Product #

74

Tan, Slightly Tacky # 1.5 Lithium Complex 344 35.5 148 – 312 -29° -51° to 235° 50 500 79 0.26 5 Tubes – 210140, 15.9 Kg Pail - 332278

Rock Drill Oil

75

UFA ROCK DRILL OIL (EP100)

Premium pneumatic rock drill oil. Performance Benefits include: · Minimize oil mist and oil consumption · Emulsifies completely with water to remove condensation · Wear protection · Corrosion protection · Tacky

Applications include: · Airline lubricated pneumatic tools including rock drills, jack hammers, riveters etc. · Used in road construction, underground mining operations used in preventing corrosion and binding on drill chains

Plus use in: · Plunger pump packings



UFA ROCK DRILL OIL Properties ISO Grades Available Viscosity, cSt 40°C 100°C Pour Point, °C Operating Range, °C Steam Emulsion Number Demulsibility, oil-water-emulsion, ml Timken OK Load, kg Falex Failure Load, kg Falex Wear, mg UFA Package Sizes & Product #

76

EP 100 100 11.9 -6° -5 to 25° 1200 + 0-0-80 16 1,400 16 20L – 830364, drums - 787679

Chain Oils

77

UFA CHAIN OILS

Multipurpose Chain Oils. Performance Benefits include: · Tacky, non-fling, non-drip formulation · Better metal coverage · Antiwear protection · Corrosion protection

Applications include: · Chainsaw bar chains · Not to be used in the power head (engine) of a chainsaw. See UFA Two Cycle Synthetic Blend · Various types of power transfer drive chains



UFA CHAIN OILS Properties UFA Name / Grades Available Colour Viscosity, cSt 40°C Pour Point, °C Flash Point, °C UFA Package Sizes & Product #

78

Summer Red, Tacky

Winter Red, Tacky

65 -26° 230° 3.78L – 414947

30 -35° 225° 3.78L – 528101

Water Soluble Lubricant

79

UFA HYDROSOL Performance Benefits include: · Coolant and lubricant · Biodegradable · Non toxic · Odourless · Hydrocracked (Group II Plus) based oil which emulsifies with water to form a lubricant emulsion · Emulsion stable for up to 12 hours after circulation stopped · Provides some corrosion protection for metal components · Avoid freezing of the water emulsion

Applications include: · Cool and lubricate down hole mud pump plungers · Cool and lubricate steel cutting tools and other applications needing a water soluble product

Mixing: · Ratios as low as 100:1 (water:oil) · Always add the oil into the water (not the reverse), while stirring. · Tap water is adequate. Deionized or distilled water is preferred.



UFA HYDROSOL

Properties Appearance, as purchased Density, kg/m3, 15°C Viscosity, cSt 40°C Flash Point, °C Static Sheen, EPA Tox Test Rainbow Trout Tox Test, 96 hour LC 50, ppm Microtox, EPS 1/RM/24 UFA Package Sizes & Product #

80

Clear 861 35 220° Pass > 100,000 Pass 20L – 830694 205L - 642665

Compression Cylinder & Rod Oil

81

CHEVRON COMPRESSOR OIL 260

Reciprocating natural gas compressor cylinder oil Performance Benefits include: · Good oil-water separability · Good deposit control · Wear protection · Oxidation and thermal stability · Rust and corrosion protection · Formulation does not contain any barium additives

Applications include: · Cylinders, rod packings, valves on natural gas compressors such as Ariel, White Superior (Cooper), Cooper Bessemer, Energy Industries, Worthington and Dresser Rand · Compressing dry natural gas which may contain carbon dioxide or hydrogen sulfide. · Do not use in breathing air apparatus or medical equipment



CHEVRON COMPRESSOR OIL 260

Properties Grades Available Density, kg/m3, 15°C Viscosity, cSt 40°C 100°C Viscosity Index Pour Point, °C Flash Point, °C Calcium, ppm UFA Package Sizes & Product #

82

260 889 260 20.9 95 -16° 275° 780 drums – 787786 bulk - 138764

Antifreeze & Coolants

83

UFA Universal Antifreeze, an ethylene glycol based product, is compatible with aluminum engine blocks and meets warranty and performance specifications for major engine manufacturers. Available in 3.78 litres, 9.46 litres and 205 litres.

Extended Life Global Antifreeze is guaranteed for five years or 250,000 km in all makes and models of foreign and domestic passenger vehicles and light duty trucks. Available in 3.78 litres. Windshield Washer Antifreeze, utilizes a non-smear formula to keep windshields clean. Protects to -35°C & -45°C. Available in 3.78 litres.

UFA Extended Life Heavy Duty Diesel & Automotive Engine Coolant offers 12,000 hours or 1,000,000 km service life in heavy duty applications. The operating life for auto is 250,000 kms or 5 years. You’ll get 3,000 hours or 240,000 km service prior to recharging with Supplemental Coolant Additive. The coolant can be used in most automotive applications including gasoline engines that typically require higher silicate inhibitors to fight scale and corrosion. Available in 3.78 litres, 9.46 litres and 205 litres.

Universal Gas Line Antifreeze is a premium gas line anti-freeze for fuel injected engines, carbureted engines, utility engines, snowmobiles, ATV’s and motorcycles. Available in 150 ml.

RV Antifreeze in an inhibited, noncorrosive antifreeze which protects and prevents freezing of drain and fresh water lines in mobile homes, recreational vehicles, boats and seasonal homes. It is non-toxic and offers burst protection to -50°C. Available in 3.78 litres.

Air Brake Antifreeze prevents frozen air lines, helps absorb condensation and fights corrosion. Add the anti-freeze to the alcohol reservoir, air line hose or supply tank. Available in 1 litre and 3.78 litres.

84

Filters

85

Your local UFA carries oil, air and fuel filters for a wide range of applications. UFA carries an extensive line of quality automotive supplies and accessories from recognized brand names such as Tridon, WD-40, Armor All, Gunk, Wedco, Lube Tec, Buss, Lincoln and Mallory. UFA handles a full range of Fleetguard filters for all applications including automotive, light truck, highway, tractor and agricultural applications. Oil filters keep your engine clean, air filters help trap harmful contaminants and fuel filters help maintain your vehicle’s operating efficiencies by retaining microscopic waste particles that circulate through the fuel system.

86

Fuel Tanks

87

Your local UFA Farm and Ranch Supply store and Petroleum Agency carry a wide range of Westeel fuel tanks and accessories for storage and dispensing of fuel. Above ground fuel tanks, stands and ladders, slip tanks, fuel hoses and nozzles are also available from your local UFA. Road Vault is recommended for use as a portable containment device for dangerous liquids as it meets the stringent regulations listed on the CAN/CGSB 43, 146-94 Standard for this style and application of tank. Featuring rugged 12 gauge steel construction, the Road Vault’s plug style emergency vent provides added security against explosion in case of fire or excessive internal pressure. Double internal baffles within Road-Vault 130 and 165 gallon and the single baffle within the 135 gallon model significantly reduce hydrostatic stock effects due to liquid sloshing. Available in 130 gallon capacity, 135 gallon capacity, and 165 gallon capacity. Fuel Storage Tanks are built with heavy gauge steel with features such as a 1” drain plug, 2-1/2” combination fill and vent cap opening with lock lug, 1” opening for 1” hose assembly. Westeel fuel tanks are built to offer years of durable performance. Available in either primer coat or aluminum finish. Available in 300 gallon capacity, 500 gallon capacity and 1,000 gallon capacity. Fuel Storage Tank Stands are available at UFA for 300, 500 and 1,000 gallon fuel tanks in 4’, 7’ and 9’ heights. All galvanized steel construction is strong, heavy and long lasting. Double cross braces are centre bolted for greater rigidity. The stands, which are easy to assemble, include foot pad, catwalk brackets and nozzle protector. The locking type nozzle holder is weather-protected to stand up against the elements. Fuel Nozzles, Hoses and Accessories complement UFA’s line of Fuel Slip Tanks and Fuel Storage Tanks. Medium duty, gravity type fuel nozzles are available. As well, premium fuel hoses adaptable to hand pumps, gravity feed pumps, skid tanks and storage tanks can be ordered through UFA’s Farm and Ranch Supply stores and Petroleum Agencies. Gravity type fuel nozzles available with 3/4", 1" and 1-1/4" spouts. Hoses available in 3/4", 1" and 1-1/4" diameters.

88

Vacuum Monitored Stationary Storage

STANDARD FEATURES · Durable all steel construction in a horizontal design · Consists of a heavy gauge tank shell and strong embossed ends to prevent deflection under load · All exterior surfaces prepared with a chemical wash and finished with a rugged and durable we at-resistant powder coat white · Heavy duty lifting lug(s) supplied for easy installation and tank placement · Standard plugged tank openings include a 4" NPT fill opening, 2" NPT pump opening, 2" NPT vent opening, 2" NPT spare opening. 1 1/2" NPT secondary Inspection port, emergency vent 3" (FV12H/20H)/4" (FV41H), interstitial vent 3" (FV12H/20H)/4" (FV41H)

89

Batteries

90

Your local UFA Farm and Ranch Supply store and participating Petroleum Agency carry a wide range of quality, durable batteries for a wide range of applications. Automotive batteries are available in varying levels of performance abilities: premium performance, high power, economical, etc. Performance is represented by cold cranking amps or ability to start vehicle and reserve capacity. Light truck and van batteries are engineered to provide added protection from rough rides. These batteries have heavier, denser plates than those used in standard automotive batteries. They usually have more electrolyte as well. A thermal adhesive is also used to bond plates and separators together to provide maximum vibration protection. Heavy Duty Agriculture/Commercial batteries are designed to offer maximum vibration protection and truck tough service. Internal construction features such as extra wide separators and special grid design help provide maximum starting power to meet the high power needs of heavy duty commercial vehicles. Marine batteries can be either deep cycle or starting. Both designs are specially engineered to stand up to wave pounding and engine vibration encountered in marine use and feature the combination S.A.E. post and stud terminal. Deep cycle batteries are specially designed with thicker grids and denser plate material to withstand hundreds of deep discharges. Deep cycle batteries are recommended for powering trolling motors, running lights, camper accessories and anywhere else that power is drained and not immediately restored. Lawn and Garden/ATV/Motorcycle/Snowmobile batteries offer special construction features to provide vibration protection and endurance. The all-purpose application is an excellent source for lawn and garden equipment, golf carts, snowmobile applications, motorcycles and ATV's.

91

Appendix

92

APPENDIX

Glossary These descriptions are general in nature and may not be absolutely technically correct. Acid Number or Total Acid Number – is a measurement of the acidic properties of an oil. The acid number of an oil increases during the service life of the oil due to acid build-up in the oil. AGMA – American Gear Manufacturers Association Anti-wear Additive – is an additive used to reduce the amount of wear between two sliding surfaces by reacting with the metal surface to form a film. Zinc (dialkyl dithiophosphate) is the most common type used. API – American Petroleum Institute Ash or Sulphated Ash – is an measurement of the residue left behind after the combustion of an oil. Metallic (calcium and magnesium) detergents and (zinc) antiwear additives contribute to the ash content of an oil. ASTM – American Society for Testing and Materials. This group establishes many of the test methods used by laboratories to evaluate oils and greases. Autoignition Temperature (AIT) – is the temperature to which an oil can be heated before it will spontaneously ignite, even without a source of ignition. The AIT will occur at a higher temperature than the flash point or fire point of an oil. Base Number or Total Base Number – is a measure of the basic or alkaline properties of an oil. The base number of an oil decreases during the service life of an oil due to the consumption of some of the additives in the oil. Base Oil or Base Stock – is the lubricating oil portion of a lubricating oil or grease. It may be mineral (refined from crude oil) or synthetic (manufactured, chemically altered).

93

Brookfield Viscosity – a low temperature viscosity used to evaluate hydraulic oils and gear oils. CCS – Cold Cranking Simulator, is a low temperature viscosity used to evaluate the start-up performance of motor oils. Centistoke – (cSt) A common unit of kinematic viscosity. Equal in value to a mm2/s. Centipoise – (cP) A common unit of absolute or dynamic viscosity. Results from Brookfield, Cold Cranking Simulator and Mini Rotary viscometers provide results in centipoise. Equal in value to a milli Pascal second (mPa.s). CGSB – Canadian General Standards Board, establish standard laboratory test methods for Canada. Channel Point – is the lowest temperature at which an oil will slump back into a channel cut through the oil. It is used to simulate gear teeth moving through cold oil. Compounded Oil – is a lubricating oil containing fatty (natural or synthetic) additives. Demulsibility – is the ability of an oil to allow water to separate (drop-out). Dropping Point – is the highest temperature to which a grease can be heat before a drop of oil separates (and drops) from the grease (under prescribed conditions). EP – Extreme Pressure – is a term used to describe an oil or grease which contains an additive used to protect metal surfaces from heavy loading and shock loading by reacting with the metal surface to reduce the potential damage. Common in gear oils and multipurpose greases. Four (4) Ball Test – 4 Ball Wear test measures the wear protection provided by a lubricant by measuring a scar diameter on four steel balls. A smaller scar diameter indicates better wear protection. 4 Ball EP test measures the extreme pressure load carrying capacity of a lubricant. A higher load causing the welding of the balls (Weld Load) and a higher calculated Load Wear Index (LWI), determined prior to welding, indicate better EP protection.

94

Flash Point – is the lowest temperature at which an oil creates enough flammable vapour to ignite in the presence of a spark, but not sustain a flame. COC – Cleveland Open Cup Method, used for lubricating oils. PMCC – Pensky-Martens Closed Cup Method, used for fuel oils and lubricants containing lighter solvents. TAGCC – Tag Closed Cup Method, used for solvents. ISO – International Standards Organization Lubricant – an oil or grease or solid used to reduce friction between two moving surfaces in contact. Mineral Oil – is base oil (or base stock) derived directly from crude oil at a refinery. The crude oil is cleaned-up by various solvent extraction, hydrofinishing, hydrotreating and dewaxing processes and separated into different viscosity grades. MRV – Mini Rotary Viscometer, is a low temperature viscosity used to measure the ability of an oil to be pumped within an automotive engine. It is used to prevent oil starvation during engine start-up. Neutralization Number – is another term used to refer to either the acid number or base number of an oil. NLGI – National Lubricating Grease Institute. Penetration – is used to determine the NLGI grade number (the hardness or stiffness) of a grease e.g. a #2 grade grease. R&O – is an oil containing primarily just a rust and oxidation inhibiting additive package. It may contain an antifoam additive but will not contain an antiwear or EP additive. SAE – Society of Automotive Engineers. Solvent Extraction – a refining process for mineral base oils that is used to remove undesirable chemical components.

95

STLE – Society of Tribologists and Lubrication Engineers. Sulphated Ash – See Ash. Synthetic – man-made, structurally altered (not naturally occurring) base oil. Various chemical types exist with different properties. Synthetic Blend – is a formulated lubricating oil containing both mineral oil base stock and synthetic oil base stock. The proportion of mineral oil to synthetic oil can vary widely. Timken OK Load – is a measure of the extreme pressure (EP) properties of an oil or grease. The “OK Load” is the heaviest load that a film of lubricant can support without scoring under the test conditions. Test results can vary significantly. Total Acid Number (TAN) – See Acid Number Total Base Number (TBN) – See Base Number

96

Kinematic Viscosity Comparison Chart

210°F limits converted to 40°C on basis of 95 VI oils

97

NLGI Grease Grade Definitions Grade Penetration Range Comments # 000

475 to 445

semi-fluid, used in some gearboxes

# 00

430 to 400

used in centralized systems

# 0

385 to 355

used in centralized systems

# 1

340 to 310

grease gun & centralized systems

# 2

295 to 265

most common grade, grease gun

# 3

250 to 220

grease gun, higher speed bearings

# 4

205 to 175

not common

# 5

160 to 130

not common

# 6

115 to 85

hard, block grease, not common

98

SAE Engine Oil Viscosity Grade Definitions

LOW TEMPERATURE VISCOSITIES

HIGH TEMPERATURE VISCOSITIES

Viscosity CCS MRV Min. Max. Grade Cranking Pumping Kinematic Kinematic (cP) Max @ °C (cP) Max @ °C Viscosity Viscosity @ 100°C @ 100°C 0W 6,250 @ -35° 60,000 @ -40° 3.8 — 5W 6,600 @ -30° 60,000 @ -35° 3.8 — 10W 7,000 @ -25° 60,000 @ -30° 4.1 — 15W 7,000 @ -20° 60,000 @ -25° 5.6 — 20W 9,500 @ -15° 60,000 @ -20° 5.6 — 25W 13,000 @ -10° 60,000 @ -15° 9.3 — 20 — — 5.6 < 9.3 30 — — 9.3 < 12.5 40 — — 12.5 < 16.3 40 — — 12.5 < 16.3 50 — — 16.3 < 21.9 60 — — 21.9 < 26.1

High Shear (cP) @ 150°C ——————2.6 2.9 2.9 (0W, 5W, 10W) 3.7 (15W, 20W, 25W, 40) 3.7 3.7

All values are critical specifications as defined by ASTM D 3244 SAE J-300 (Dec 99 Revision)

99

SAE Gear Oil Viscosity Grade Definitions PROPERTY 75W 80W 85W 90 140 250 Viscosity, cSt 100°C Min. 4.1 7 11 13.5 24.0 41 Max. 24.5 41.0 Max. Temp (°C) for 150,000 cP Brookfield Visc. -40° -26° -12° — — —

100

ISO Viscosity Grade Definitions

ISO Grade

Grade Minimum (@ 40°C)

Grade Maximum (@ 40°C)

10 15 22 32 46 68 100 150 220 320 460 680 1000

9 13.5 19.8 28.8 41.4 61.2 90 135 198 288 414 612 900

11 16.5 24.2 35.2 50.6 74.8 110 165 242 352 506 748 1100

101

Conversion Factors Volumes 1 litre = 0.220 Imp gallons = 0.264 US gallons = 0.0010 cubic meters 1 Imp gallon = 4.546 litres = 1.20 US gallons = 0.00455 cubic meters 1 US gallon = 3.785 litres = 0.8327 Imp gal. = 0.003785 cubic meters 1 cubic meter = 1000 litres 1 cubic inch = 16.4 cc or ml 1 cc = 0.0610 cubic inches 1 Bbl = 159 litres = 35 Imp Gallons Lengths 1 inch = 25.4 mm 1 foot = 0.3048 meters 1 yard = 0.0144 meters 1 mile = 1.6093 km Mass (Weights) 1 ounce = 28.35 grams 1 pound = 0.454 kilograms 1 kilogram = 2.205 pounds Temperature °F = (°C x 9/5) + 32 °C = (°F – 32) x 5/9 Pressure 100 kPa = 14.504 PSI = 1 bar 1 PSI = 6.895 kPa Power 1 Watt = 3.41 BTU’s / hr

102