Loading documents preview...
April 2005
DEUTSCHE NORM
{
DIN ISO 8130-3
This standard, together with DIN ISO 8130-2, April 2005 edition, supersedes DIN 55990-3, December 1979 edition.
ICS 87.040
Coating powders Part 3: Determination of density by liquid displacement pyknometer (ISO 8130-3:1992)
Pulverlacke – Teil 3: Bestimmung der Dichte mit einem Pyknometer durch Flüssigkeitsverdrängung (ISO 8130-3:1992)
A comma is used as the decimal marker.
National foreword This standard has been prepared by ISO/TC 35 ‘Paints and varnishes’, SC 9 ‘General test methods for paints and varnishes’. The responsible German body involved in its preparation was the Normenausschuss Beschichtungsstoffe und Beschichtungen (Coatings and Coating Materials Standards Committee). The DIN Standards corresponding to the International Standards referred to in clause 2 of the ISO Standard are as follows: ISO Standard
DIN Standard
ISO ISO ISO ISO
DIN DIN DIN DIN
787-10 842 3696 8130-2
EN ISO 787-10 EN ISO 15528 ISO 3696 ISO 8130-2
Amendments DIN 55990-3, December 1979 edition, has been superseded by the specifications of DIN ISO 8130-2 and DIN ISO 8130-3. Previous edition DIN 55990-3: 1979-12.
National Annex NA Standards referred to (and not included in Normative references) DIN EN ISO 787-10 General methods of test for pigments and extenders – Part 10: Determination of density using a pycnometer (ISO 787-10:1993) DIN EN ISO 15528 Paints, varnishes and raw materials for paints and varnishes – Sampling (ISO 15528:2000) DIN ISO 8130-2 Coating powders – Part 2: Determination of density by gas comparison pyknometer (referee method) (ISO 8130-2:1992) Document comprises 5 pages.
© No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen).
English price group 6 www.din.de www.beuth.de
!,cZl" 07.05
9645573
Page 1 ISO 8130-3:1992
Coating powders Part 3: Determination of density by liquid displacement pyknometer
Page 2 ISO 8130-3:1992
Page 3 ISO 8130-3:1992
Page 4 ISO 8130-3:1992