Etap Knowledge Base: Motor Nameplate Data

ETAP Knowledge Base

Motor Nameplate Data Description: Relation between HP/kW button and motor rated kVA and FLA Category:

Motor Editor, kVA and FLA Calculation

Type:

Modeling

Keywords:

kW, HP, Motor Rated kVA, FLA, Motor Editor

The Motor Editor, like all other editors in ETAP, is designed to accept raw manufacturer data. After you enter a machine size, you can decide if this value is in HP or kW. Consequently, ETAP will recalculate the kVA and FLA values accordingly.

This document is confidential and proprietary to Operation Technology, Inc. and may not be reproduced, published or disclosed to others without the written authorization of Operation Technology, Inc., 17 Goodyear, Suite 100, Irvine, CA 92618, USA. © 2010 by Operation Technology, Inc. All Rights Reserved.

© Operation Technology, Inc.

Page 1 of 1

ETAPKB