Utility Tool & Equipment catalog
Alberta: #1 - 1381 Hastings Crescent SE Calgary, A.B. T2G 4C8 Phone: 403-243-1900 Toll Free: 1-877-248-6657 Fax: 403-243-2063 Email:
[email protected] British Columbia: 17949 Roan Place Surrey, B.C. V3S 5K1 Phone: 604-594-2701 Toll Free: 1-866-594-2701 Fax: 604-594-2751 Email:
[email protected] Manitoba: 1103 Keewatin St. Winnipeg M.B. R2X 2Z3 Phone: 204-783-9771 Toll Free: 1-855-766-8021 Fax: 204-783-8951 Email:
[email protected] Ontario: Unit 2 - 7015 Ordan Dr., Mississauga, O.N. L5T 1Y2 Phone: 905-564-5344 Toll Free: 1-844-564-5344 Fax: 905-564-5354 Email:
[email protected]
LineStar proudly offers the finest in: • • • • •
100%
Canadian Owned
Lineman’s Tools & Equipment Custom Made Grounds and Jumpers Tool Repair Chain & Strap Hoist Repair, Service & Certification Industry Knowledge & Customer Service
www.linestar.ca *Cover and Back page artwork supplied by Buckingham Manufacturing Company
Thank you for choosing LineStar Utility Supply as your provider for quality tools, equipment, and expert advice in the Power Utility, CATV, Telco, and Electrical distribution industries. Included in this catalogue are our most common Lineman’s Tools and Specialty Equipment used in Construction & Maintenance of Overhead & Underground Powerlines. Items featured in this catalogue do not cover the expanse of products LineStar offers. At LineStar, we specialize in “hard to find” Tools and Equipment. If a product you require is not featured in this catalogue, it might be listed on our website, www.linestar.ca. Contact one of our branches across Canada to reach a LineStar team member who will be happy to provide you with information and pricing on any items. Providing exceptional customer service is the backbone of LineStar’s business, and can be credited with the immediate success of LineStar Utility Supply upon opening our first location in 2005. LineStar’s established relationships with world class vendors enables us to provide high quality, high value, and high technology products to our customers. It is thanks to many years of experience and long term relationships with suppliers and customers that gives the LineStar team an edge when providing service to customers with various product requests. Whether it’s taking an order or helping to provide specific product knowledge, LineStar is ready to fulfill your requests.
100%
Canadian Owned
table of contents Hand Tools Pages 5-14 Wrenches, Sockets, Pliers, Screwdrivers, Tape Measures, Rulers, Hammers, Knives, Wire Cutters Impact Wrenches Hydraulic & Battery Impact Wrenches, Sockets & Adapters
Pages 15-20
Drills and Auger Bits Gas Drills, Wood Pole Auger Bits
Page 20
Hydraulic Tools & Accessories Pages 21-25 Intensifiers, Hydraulic Pruners & Chain Saws, Hydraulic Couplers & Hoses Canvas Tool Bags Pages 26-28 Tramp Bags, Nose Bags, Ampact & Line Hose Bags, Oval Tool Buckets, Specialty Tool Buckets & Bags Aerial Bucket Items Pages 29-37 Tool Aprons, Boards & Hooks, Tool Holders, Bucket Covers, Rescue Systems, Harnesses Pole Climbing Gear Pages 37-54 Body Belts, Gut Straps & Suspenders, Canvas Pouches & Tool Holsters, Pole Straps, Wood Pole Fall Protection, Pole Climbers & Pads Personal Protection Pages 55-64 Linemans Climbing Boots, Work Boots, Work Gloves, Arc/FR Traffic Safety Clothing, Arc/FR Rain Gear Rubber Goods Pages 65-7 Rubber Gloves, Protectors & Bags, Rubber Sleeves & Accessories, Rubber Blankets & Accessories, Insulating Line Hose and Covers, Rubber Goods Cleaner Cover Up Pages 72-76 Plastic Conductor & Cutout Covers, Crossarm & Pole Covers, PVC Sheeting, Arc Blankets & Substation Barriers, Line Hose & Covers Traffic Control & Work Zone Safety Pages 77-80 Traffic Cones & Barricades, Work Lights, Hard Hats, Liners & Lights, Safety Glasses Truck Accessories Reel Lifters, Take Up & Payout Reels, Ground Protection Mats & Outrigger Pads, Truck Grounding, Measuring Equipment
Pages 81-85
Lifting & Rigging Pages 86-94 Ox Blocks, Rope Blocks & Snatch Blocks, Half-Side & Wide Throat Rigging Blocks, Handline Blocks & Sets, Slack Blocks, Nylon Slings, Transformer Slings & Dollies Hoists Pages 95-104 Chain Hoists, Magna Lever Hoists, Pulling Hooks & Pulling Eyes, Strap Hoists, Link Sticks, Capstan Hoists Wire Grips & Swivels Pages 105-123 Wire Pulling Grips, Wedge Grips, Pocketbook & Slip Grips, Wire Mesh Pulling Grips, Swivels & Connectors, Clamps, Bands, Rope
British Columbia: Alberta: Saskatchewan/Manitoba: Ontario:
phone: phone: phone: phone:
Stringing Blocks Pages 124-132 Universal 7” Blocks & Brackets, Uplift & All-Angle Blocks, Wide Throat Blocks, Nylon & Helicopter Blocks, Radius Blocks, Grounded Blocks & Accessories, Conductor Stringing System, Synthetic Ropes Stringing & Sagging Equipment Pages 133-134 Sagwatch, Clipping Hook, Sag Scope & Thermometer, Dynamometers, Traveling Grounds, Tower Safety Equipment Pullers & Tensioners
Pages 135-136
Jumpering Equipment Pages 137-140 Jumper Clamps & Ferrules, Jumper Cable & Jumper Sets, Loadbreak and Load Pickup Tools Grounding Equipment Pages 141-149 Grounding Clamps, Grounding Ferrules & Cables, Ground Sets, Elbow & Transformer Sets, Truck Ground Reels, Equipotential Mats, Grounding Attachments, Brushes Conductor Cleaning Brushes
Page 150-151
Wire Cutting Tools Pages 152-164 ACSR Trimmer & Bushings, Steel & Fiberglass Handle Cutters, Ratchet Cutters, Hydraulic & Battery Powered Cutters, Hotline Cutters Compression Tools and Dies Pages 165-217 Manual Compression Tools, Battery & Hydraulic Powered Tools, 60 & 100 Ton Presses, Hydraulic Pumps & Hoses Ampact Tools, Compression Dies Fiberglass Hotline Tools Pages 210-230 Shotguns & Telescoping Sticks, Hot Stick Cleaners, Universal & Disconnect Sticks, Universal Attachments Fiberglass Ladders & Arms Pages 231-233 Hook & Sectional Ladders, Insulated Platforms, Hot Arms & Conductor Supports Meters & Testers Pages 234-255 Voltage & Phasing Testers, Resistance Testers & Multi-Meters, URD Pipe & Cable Locators Anchoring & Pole Setting Pages 256-264 Kelly Bar Adapters & Locking Dogs, Drive Tools, Pole Tongs, Pole Slings Cant Hooks, Shovels & Spoons, Dirt Slings, Hydraulic Tampers, Hydraulic Pole Pullers Underground Equipment Pages 265-287 Tents and Blowers, Wire Strippers, Bushing Tools, Duct Installation Tools, Cable Feeding & Hooked Hanger Sheaves, Cable Guides & Jamb Skids Manhole Cover Lifters, Manhole Rescue Equipment ClampStar Connector Corrector Index Pages
604-594-2701 403-243-1900 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
Page 288 Pages 292-294
100%
Canadian Owned
5
Wrenches Lineman’s “Bell” Wrenches Heat treated forged steel. Each end has two size openings. Used on heavy three-bolt guy clamps on which clearance is limited.
Plastic-Dipped Handle
Part # D507-8 D507-10 D507-12
Handle Finish Capacity Plastic-Dipped 1-1/8” Plastic-Dipped 1-5/16” Plastic-Dipped 1-1/2”
Part # 3146 3146A 3146B
Cushion Grip Adjustable Wrench Green Cushion Grip Handle
hand tools
Extra Capacity Adjustable Wrenches Forged heat-treated alloy steel for maximum strength. Extra capacity jaws allows use of a smaller wrench to handle bigger jobs.
Large End Small End 29/32” x 1-3/32” 5/8” x 13/16” 1-1/16” x 1-5/16” 5/8” x 7/8” 1-1/16” x 1-3/16” 11/16” x 7/8”
Adjustable Wrench - Black Industrial Finish
Part # Length Max Capacity 9AG10 10” 1-3/8” 9AG12 12” 1-1/2”
Part # Length Max Capacity 9AB10 10” 1-3/8” 9AB12 12” 1-1/2”
SpecialTY Wrenches Part #920 Goat Wrench One side of the jaw is serrated to grip nuts, bolts or pipe from 1/2” to 1-1/4”. Made from alloy steel.
Part #4477 Micro-Adjustable “Click Type” Metal Handle Torque Wrenches Rugged, durable & easy to operate. All parts made from alloy tool steel for long life accuracy. Accuracy meets or exceeds all applicable government specifications.
LOCKING PLIERS 10” Straight Jaw Locking Plier • • • • •
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Part # Max. Jaw Capacity Overall Length
Jaw Type
C10SV 1-3/4” 10” (45) (254)
Straight
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
World Famous Crescent® Brand Maximum Jaw Opening Per ASME Specs Angled Tooth Pattern for Better Grip Nickel-Plated Finish Resists Rust and Corrosion Compound Action for Powerful Non-Slip Locking Grip • Versatile Curved Jaw Also Features Integral Wire Cutter
6
SPECIALTY TOOLS
hand tools
Hex-Key Wrenches Part # Keys 70591 9 70583 8 70581 8 70570 5
Sizes 5/64”, 3/32”, 3/32”, 7/64”, 1/8”, 9/64” 5/32”, 3/16”, 7/32”, 1/4” 3/32”, 7/64”, 1/8”, 9/64”, 5/32” 3/16”, 7/32”, 1/4” .05”, 1/16”, 5/64”, 3/32”, 7/64” 1/8”, 9/64”, 5/32” 3/16”, 7/32”, 1/4”, 5/16”, 3/8”
RBW-91634 - Ratcheting Box Wrench • 9/16” x 3/4” • Thick-walled plastic ergonomic handle with centre isolation hole • Rated 1000V
GP-223 • 9/16” x 3/4” • Thick-walled plastic ergonomic handle with centre isolation hole • Rated 1000V
Bug Wrenches Our other standard models provide unique combinations that allow line workers to carry one tool that will install hundreds of different connectors. The very popular 3/4” and 9/16” combinations as in BW-223 and the Heavy- Duty, Forged model BW-223HD, are just right when installing or performing maintenance on overhead transformers.
BW-223
BW-223HD with Heavy-Duty Forged Fitting
Bolt-Thru Ratchet Wrenches The unique Bolt-Thru design allows bolts to pass entirely through the socket or ratchet so that the nuts can be secured on any threaded length. Both handle types have reversible ratchet levers. 151T Stamped steel handle with triple square socket
Triple square sockets fit 3/4”, 1”, 1-1/8” square nuts (1/2”, 5/8” & 3/4” bolts)
Stamped Steel Handle
# PSD Penta DRIVER
www.linestar.ca
Speed Sleeve™ spins freely to open transformers and switch gears 2x faster Includes removable drill adapter # PSD Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
7
SPECIALTY TOOLS
BRAND NEW DESIGN - TIME TESTED TECHNOLOGY Length = 8” Weight = 1.5 lbs 150 lb-ft capability Bolt-Thru Vinyl grip for comfort
Square Socket Openings • 3/4” for 1/2” hardware • 1” for 5/8” hardware • 1-1/8” for 3/4” hardware
hand tools
101T Mini Triple Square Wrench The Model 101T Mini Triple Square ratcheting lineman’s wrench is designed to meet the specific needs of high line utility workers. The 101T fits most common utility pole fasteners: lag bolts, C-clamps, and suspension bolts. The reduced socket depth and short handle length makes the tool easier to use in tight spaces. The compact size and light weight make it less tiring to use for extended periods or to carry in a tool-belt. Although the new wrench is compact in size, it still delivers big time performance with a torque capacity of 150 lb/ft.
103T Dual End Distribution Wrenches One wrench does the work of many! • Five socket sizes in one wrench • Square = 3/4”(oversize), 1” & 1-1/8” • Hex = 9/16” & 3/4” • (3/4” Hex also turns 5/8” square nuts) • Two handle lengths • 9” (model 101TDE) & 12” (model 103TDE) • Ergonomic handle shapes make work more comfortable • Reversing control on both ends • Twice as strong as a standard ratcheting box wrench • Fluorescent orange sockets make the wrenches harder to lose, easier to find • Bolt-thru design lets bolts pass entirely through sockets and arm head so nuts can be secured on any threaded length.
Triple Square Tower Wrenches • Three Square Sizes = 1-1/8”, 1-5/16” and 1-1/2” • 103T Stamped 12 Inch / 104T Stamped 15”/105T Stamped 18” • Bolt-Thru Design • Provides greatest flexibility for lineman dealing with multiple sized hardware • Coated with epoxy paint for durability and easy cleaning • Socket painted fluorescent orange for high visibility • Designed for utility, construction and maintenance workers
104T
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Double Square Tower Wrench • Two Square Sizes = 1-5/16” and 1-1/2” • 52 Cast 15 Inch / 53 Cast 20 Inch / 152 Stamped 17 Inch • Provides flexibility for lineman dealing with multiple sized hardware • Bolt-Thru Design • Coated with epoxy paint for durability and easy cleaning • Designed for utility, construction and maintenance workers
8
IMPACT SOCKETS
hand tools
1/2” DRIVE SOCKETS
6 Point Deep Well
6 Point Standard
12 Point Deep Well
12 Point Standard
Part # Size Length 4516 1/2” 3-3/64” 4518 9/16” 3-3/64” 4520 5/8” 3-3/64” 4522 11/16” 3-3/64” 4524 3/4” 3-3/64” 4526 13/16” 3-3/64” 4528 7/8” 3-3/64” 4530 15/16” 3-3/64” 4532 1” 3-3/64” 4534 1-1/16” 3-3/64” 4536 1-1/8” 3-3/64” 4540 1-1/4” 3-3/64”
Part # Size Length 4016 1/2” 1-7/16” 4018 9/16” 1-7/16” 4020 5/8” 1-15/32” 4022 11/16” 1-15/32” 4024 3/4” 1-15/32” 4026 13/16” 1-9/16” 4028 7/8” 1-5/8” 4030 15/16” 1-5/8” 4032 1” 1-11/16” 4034 1-1/16” 1-3/4” 4036 1-1/8” 1-13/16” 4038 1-3/16” 1-7/8” 4040 1-1/4” 1-59/64”
Part # Size Length 4616 1/2” 3-3/64” 4618 9/16” 3-3/64” 4620 5/8” 3-3/64” 4622 11/16” 3-3/64” 4624 3/4” 3-3/64” 4626 13/16” 3-3/64” 4628 7/8” 3-3/64” 4630 15/16” 3-3/64” 4632 1” 3-3/64” 4634 1-1/16” 3-3/64” 4636 1-1/8” 3-3/64” 4638 1-3/16” 3-3/64” 4640 1-1/4” 3-3/64”
Part # Size Length 4116 1/2” 1-7/16” 4118 9/16” 1-7/16” 4120 5/8” 1-15/32” 4122 11/16” 1-15/32” 4124 3/4” 1-15/32” 4126 13/16” 1-9/16” 4128 7/8” 1-5/8” 4130 15/16” 1-5/8” 4132 1” 1-11/16” 4134 1-1/16” 1-3/4” 4136 1-1/8” 1-13/16” 4138 1-3/16” 1-7/8” 4140 1-1/4” 1-59/64”
1/2” DRIVE SOCKETS sets
Part # 6 Point Deep Well Socket Sets 410 8 Pc 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1 Rail & 8 Clips 414 11 Pc 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1 Rail & 11 Clips Part # 6 Point Standard Socket Sets 419 14 Pc 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 2 Rails & 14 Clips 423 18 Pc 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 10” Ratchet, 5” Extension, Flex Handle & Metal Box
www.linestar.ca
Part # 12 Point Deep Well Socket Sets 409 8 Pc 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1 Rail & 8 Clips 402 11 Pc 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1 Rail & 11 Clips Part # 12 Point Standard Socket Sets 418 12 Pc 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 10” Ratchet, 5” Extension, Metal Box 417 15 Pc 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, 10” Ratchet, 5” Extension, Metal Box Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
9
1/2” drive ratchet & torque wrenches
5454A 1/2” Drive Ratchet wrench 16” Overall Length
hand tools
4433 1/2” Drive Ratchet wrench 10-1/4” Overall Length
Tri-penta wrench This underground utility wrench combines three everyday functions into one convenient tool. The ¾” Penta Socket opens transformers and switch gears. The addition of a high visibility patent pending Speed SleeveTM helps linemen open those transformers and switch gears up to 2X faster than standard penta sockets or wrenches. It also comes with 2 other tools built into the handle – the integrated Lid Lifter lifts hand hole lids and the 3/8” Screwdriver is great for opening secondary or primary doors.
57005 ratchet torque wrench 3/8” drive 30 - 150 Inch Poinds, 10-5/8” Overall Length
57010 ratchet torque wrench 1/2” drive 50 - 250 Inch Poinds, 24-1/4” Overall Length
INSULATED RATCHET WRENCH This 9” insulated wrench provides protection against electrical shock up to 1,000VAC and is made of a lightweight, high-impact composite that is as strong as steel. Part # TE-08IRW-U-LST 1/2” Drive with Universal Fitting
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
The oversized forward/reverse lever is easy to turn even when the worker is wearing gloves.
hand tools
10
PLIERS LINEMAN’S PLIERS The Original Lineman’s Pliers Sure-gripping cross-hatched knurled jaws. Hot riveted joint ensures no handle wobble. Also available with “Journeyman” style soft handles.
High-Leverage Side-Cutting Pliers
Heavy-Duty Side-Cutting Pliers
Part # Part # D2000-9NE Plastic-Dipped Handles D213-9NE Plastic-Dipped Handles HD2000-9NE Heavy-Duty Plastic Dipped Handles HD213-NE Heavy-Duty Plastic Dipped Handles D2000-9NETH Plastic Dipped Handles & 5/8” Bolt Thread D213-9NETH Plastic Dipped Handles & 5/8” Bolt Thread Cuts ACSR, nails, screws & most hardened wire DO NOT CUT ACSR
Diagonal-cutting pliers
Part # D228-7 7-1/8” Red Plastic Dipped Handles D228-8 8-1/16” Red Plastic Dipped Handles D248-8 8-1/16” Same as D228-8 but with Angled Head
Part # D202-5 5-9/16” Red Plastic Dipped Handles D202-6 6-1/8” Red Plastic Dipped Handles Use “C” suffix for spring loaded self-opening jaws
Diagonal-cutting pliers
Long Nose Pliers Part # D203-5 5-5/8” Side Cutting Jaws, Yellow Dipped Handles D203-6 6-5/8” Side Cutting Jaws, Yellow Dipped Handles D301-5 5-5/8” Standard Jaws, Yellow Dipped Handles D301-6 6-5/8” Standard Jaws, Yellow Dipped Handles Use “C” suffix for spring loaded self-opening jaws
Part # 1005 CUTTING & CRIMPING TOOL Crimping die marked for insulated & non-insulated solderless terminals & connectors.
pump pliers
www.linestar.ca
Secure tongue and groove design for non-slip grip – even with heavy pressure. Wide range of versatile jaw positions. Part # Jaw Capacity Overall Length Weight (lbs.) D502-10 1-3/4” 10” .97 (45) (254) D502-12 2-3/8” 12-1/4” 1.37 (60) (311) D502-16 4-1/4” 16-3/4” 3.22 (108) (425) Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
11
SPECIALITY TOOLS
Tools: Needle nose Pliers Regular Pliers Wire Cutters Hard-wire Cutters 420HC Knife 420HC Serrated Knife Saw Scissors Wood/Metal File Diamond-coated File Large Bit Driver Small Bit Driver Medium Screwdriver Ruler (8 inch/19 cm) Bottle Opener Can Opener Wire Stripper
hand tools
LEATHERMAN WAVE MULTI-TOOL The Leatherman Wave multi-tool is hands down our most popular model, made famous by its outside-accessible blades that can be deployed with just one hand. When we redesigned it in 2004, we gave the new Wave larger knives, stronger pliers, longer wire cutters, and all-locking blades. Perfect for any job, adventure, or everyday task, the Wave multi-tool is an international best-seller.
please contact any LineStar branch for other Leatherman products
SCREWDRIVERS & NUT DRIVERS
KEYSTONE-TIP ROUND SHANK Part # 602-3 602-4 602-6 602-8 602-10 602-12
Tip Shank Overall Width Length Length 7/32” 3” 6-3/4” 1/4” 4” 8-11/32” 5/16” 6” 10-15/16” 3/8” 8” 13-7/16” 3/8” 10” 15-7/16” 3/8” 12” 17-7/16”
PHILLIPS-TIP ROUND SHANK
Part # 603-1 603-3 603-4 603-6 603-7 603-10
cabinet-tip round shank
KEYSTONE-TIP square SHANK Part # 600-4 600-6 600-8 600-12
Point Shank Overall Size Length Length #2 1-1/2” 3-7/16” #1 3” 6-3/4” #2 4” 8-5/16’ #3 6” 11” #2 7” 11-5/16” #2 10” 14-5/16”
Tip Shank Overall Width Length Length 1/4” 4” 8-11/32” 5/16” 6” 10-15/16” 3/8” 8” 13-7/16” 1/2” 12” 17-7/16”
Part # 605-4 605-6 605-8 605-10
Tip Shank Overall Width Length Length 1/4” 4” 8-11/32” 1/4” 6” 10-15/16” 1/4” 8” 12-11/32” 1/4” 10” 14-11/32’
Wiha 53040 12.0 x 200mm Soft Finish Extra Heavy Duty Slotted Screwdriver
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Featuring advanced technology dual material molding. A remarkable improvement in handle design, comfort and performance. The Soft Finish ergonomic shape allows maximum torque and user comfort.
hand tools
12
cushion grip nut drivers
Insulated screwdrivers & nut drivers are available. Add “INS” suffix to the part number.
3” & 4” shanks Part # 630-3/16 630-1/4 630-5/16 630-11/32 630-3/8 630-7/16 630-1/2 630-9/16 630-5/8 631
6” shanks
Hex Shank Overall Size Length Length 3/16” 3” 6-3/4” 1/4” 3” 6-3/4” 5/16” 3” 6-3/4” 11/32” 3” 6-3/4” 3/8” 3” 6-3/4” 7/16” 3” 7-5/16” 1/2” 3” 7-5/16” 9/16” 4” 9-3/8” 5/8” 4” 9-3/8” 7 piece set sizes 3/16” thru 1/2”
Part # 646-3/16 646-1/4 646-5/16 646-11/32 646-3/8 646-7/16 646-1/2 646-9/16 646-5/8 647
Hex Shank Overall Size Length Length 3/16” 6” 9-3/4” 1/4” 6” 9-3/4” 5/16” 6” 9-3/4” 11/32” 6” 9-3/4” 3/8” 6” 9-3/4” 7/16” 6” 10-5/16” 1/2” 6” 10-5/16” 9/16” 6” 11-3/8” 5/8” 6” 11-3/8” 7 piece set sizes 3/16” thru 1/2”
measuring tools measuring tapes Oversized numbers for quick and accurate readings. Baked on epoxy coating resists rust & scratches.
Part # Length Case 93116 16’ Chrome 93125 25’ Chrome 93430 30’ Chrome 928-16HV 25’ Hi-Vis Orange
FIBREGLASS TAPES 1/2” woven fibreglass tapes with moisture-proof coating. Tape line is graduated in feet & inches to 8ths.
www.linestar.ca
Part # Length Case 946-50 50 Feet Hard Case 946-100 100 Feet Hard Case 946-150 150 Feet Open Reel
61662 FOLDING FIBREGLASS RULER • Combination Metric & Inch • 2 Meter / 78”, 15mm/ 5/8” wide • 10 Sections, Deep Embossed • Outside Reading Metric • Inside Reading Inch • 1/16” & 1mm/CM Marks
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
13
HAMMERS
Part # Head Overall 809 Double Face Weight Length 808-16 16 Ounce 13” 808-20 20 Ounce 14” 832-32 32 Ounce 15” 803 Ball-Peen 809-36 36 Ounce 14” 832 Lineman’s Straight Claw 803-16 16 Ounce 13-1/2” 803-24 24 Ounce 15” 803-32 32 Ounce 15” 803 & 809 series have fibreglass shaft handles with neoprene grip. 803 & 832 series have wooden handles. All heads are made of forged, tempered steel. 808 Straight Claw
hand tools
MLH1 (Milled Face) SLH1 (Smooth Face)
LINEMAN HAMMER • Large Head for driving Lag Screws, “J” Hooks and Hard Heads • Small Staple Starter Head • Integrated Staple Puller (also replaceable) • Integrated “J” Hook Remover • Fiberglass Non Conductive Handle • Longer Handle for 2 Handed Driving • 35oz & Milled Face or Smooth Face
KNIVES
A
C
D
B
Style Part # A 1570-3 B 7086 C 7090 D 70904
Lineman’s Skinning Knives Description Flat stock handle with notched blade & ring Round stock handle with notched blade & ring Ergonomic handled knife that features a 9-7/8” length with an accessory ring Ergonomic handled knife that features a 9-7/8” length with a notched and blunt point
BB-1 Brush Blade - 2 Tools in 1 Integrated wire brush for cleaning conductors to make better connections. Brushes up to 1000 MCM Conductor. Wire brush is easily replaceable. Blade brush design discourages scraping the aluminium M4455-50 Universal Skinning Knife conductors which can distort Fits on the spline of any brand of universal the size. Stainless steel black hot stick and has a 3” blade. oxide coated blade for maximum durability and sharpness.
46037 Cable Splicers Kit Includes 1 each of the knife, scissors and pouch.
Alberta: British Columbia: Manitoba: Ontario:
4051 Drawknife Holder
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
Part # Description 44200 Splicer’s Knife 2100-7 Scissors 5187 Leather Pouch • • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
4089 Skinning Knife Holder
hand tools
14
POCKET KNIVES
44005 Lockback Knife The Sheepfoot style blade is 2-5/8” long. The handle is made of a impact-resistant nylon resin.
44001-BLK Lockback Knife Same as the 44001 but with a black chrome blade and an anodized-aluminium handle.
All Lockback knives have a reversible thumb stud for easy, one-handed opening.
44006 Lightweight Lockback Knife 2-5⁄8” Sheepfoot Blade Sheepfoot blade is AUS 8 stainless-steel hardened to 58-59 Rc. Anodized-aluminium handle for corrosion resistance. Reversible thumb stud provides easy, one-handed opening. Includes removable pocket/belt clip for easy access.
POCKET KNIVES AND SHARPENERS 44037 Sportsman Knife The curved handle is made of ebony wood with a brass bolster. The stainless steel blade is 3-3/8” long. Comes with a leather snap case with belt loop.
44150 Mulit-Purpose Sharpening Steel Tungsten carbide bonded to fine, medium and rough surfaces can sharpen any blade. The chisel point is useful for other jobs that would harm a knife such as prying, chiseling, scrapping or splitting.
www.linestar.ca
44001 Lockback Knife Features a 2-1/2” AUS8 stainless steel blade and belt clip. 3-1/2” closed length.
48036 Knife Sharpener High-grade, tungsten carbide inserts sharpen both sides of the blade at the same time. Speedy Sharp • Handheld carbide sharpener and honing tool • Space-age Micro 100 Super Carbide that will never wear out • World’s fastest sharpener sharpens virtually everything
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
15
ID07810 Hydraulic Impact Wrench This wrench develops 500 foot pounds of torque but weighs just over 7 lbs. The 7/16” quick change chuck is standard and a 7/16” hex to 1/2” square adapter is included. It is fully reversible and has a flow rate of 4-12 gpm. Rugged and durable, this quality tool will outperform and outlast all others. 7121
7/16” Hex to 1/2” Square Adapter
H8508-1 Hydraulic Impact Wrench A reversible, twin hammer wrench that develops up to 400 ft-lbs of torque with a 7/16” hex quick change chuck. The operating pressure is 1,000 to 2,500 psi with a flow rate of 4-10 gpm. A 7/16” hex to 1/2” square adapter is included. Weighs 7.1 lbs.
impact wrenches
hydraulic impact wrenches
HW1 Hydraulic Impact Wrench Impact and temperature resistant replaceable polymer grip designed to dissipate heat from the cast handle. Increased service life with the addition of back-up rings and larger O-rings. Built-in hydraulic check valve to eliminate damage from an improperly connected tool. Part #HW1V Hydraulic Impact Drill w/ Torque Control
These Hydraulic Wrenches Are Pressure Tested and Torque Certified Prior To Shipment
BATTERy PoWERED IMPACT WREnCHES DTW800Z
7/16” Cordless High Torque Impact Wrench with Brushless Motor 7/16” Hex, Variable Speed, Reversible • Features 7/16” one-touch bit holder for rapid bit changes • 3 stage impact power selection prevents over-tightening of fasteners • BL DC motor with high power to weight and size ratio • BL DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications • Heavy duty ring enables tool to be hung on hook or bucket lines when not immediately in use • Variable speed trigger allows operator to adjust fastening speed based on materials or application • Electric brake prevents over-tightening of fasteners • Rubber joint construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact • Twin LED job lights with pre-glow and afterglow features illuminates work area • Ergonomic soft rubber grip design for vibration absorption and comfortable operation
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
BL1830 18V 3.0Ah Li-Ion Battery • Li-Ion Batteries offer extended run time versus Ni-Cad and Ni-MH batteries • Li-Ion Batteries offer more cycles over the life of the battery versus Ni-Cad and Ni-MH batteries • Optimum Charging System utilizes 3 Active Controls (Current, Voltage & Temperature) to maximize battery life • Built-In Memory Chip communicates with Charger CPU to optimize the charging process based on the unique conditions of each battery. • Available in 1/Pk, 2/Pk and 10/Pk (Bulk)
impact wrenches
16
BATTERy PoWERED IMPACT WREnCHES LXWT01
18V LXT Lithium-Ion Cordless 7/16” Hex High Torque Impact Wrench Kit Compact and Lightweight Design with High Maximum Fastening Torque • Features 7/16” One-Touch Bit Holder for rapid bit changes • Heavy Duty Ring enables tool to be hung on hook or bucket lines when not immediately in use • Same Fastening Torque in forward and reverse rotation • Rubber Joint Construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact • Rubber Bumper protects material from damage • Easy to Operate On/Off Rocker Switch • 1-3/4” Wide Hook enables tool to be hung on rafters, pipes, etc. when not immediately in use • LED Light with Afterglow feature and Independent On/Off Switch • Ergonomic Soft Rubber Grip design for vibration absorption and comfortable operation
BL1850B 18V 5.0 Ah Li-Ion Battery
5.0 Ah battery offers maximum run time for prolonged, heavy-duty applications NEW Battery fuel gauge indicates approximate remaining battery power NEW Battery Protection System provides Over-Discharge, Temperature and Current Protection for enhanced performance, battery cycle life and overall battery life (when used with STAR marked tool) • Li-Ion Batteries offer extended run time versus Ni-Cad and Ni-MH batteries • Li-Ion Batteries offer more cycles over the life of the battery versus Ni-Cad and Ni-MH batteries • Optimum Charging System utilizes 3 Active Controls (Current, Voltage & Temperature) to maximize battery life • Built-In Memory Chip communicates with Charger CPU to optimize the charging process based on the unique conditions of each battery 196675-2 - 1/Pk 196681-7 - 2/Pk 197198-3 - 10/Pk
www.linestar.ca
• • • •
DC18RC 18V Li-Ion Rapid Charger Charges 7.2V - 18V Ni-Cad, Ni-MH and Li-Ion Slide Style Batteries • Charges 18V 3.0 Ah Li-Ion battery BL1830 in just 22 minutes! • Charges 18V 4.0 Ah Li-Ion battery BL1840B in just 36 minutes! • Charges 18V 5.0 Ah Li-Ion battery BL1850B in just 45 minutes! • 3 Active Controls System (Current, Voltage & Temperature) provides an optimal charge and ensures battery cannot be overcharged or overheated during the charging process • Central Processing Unit (CPU) in battery communicates with charger to analyze battery and charge according to its unique condition • Forced Air Cooling Fan keeps battery at optimum charging temperature and prevents over heating • Digital Power Display indicates condition of battery and current charge level (-80%, +80%, 100%) • Use with Adapter ADP04 - Part No. #193949-2 - to charge pod/stick style batteries
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
17
BATTERy PoWERED IMPACT WREnCHES
impact wrenches
DTW450XRFE 1/2” Cordless Impact Wrench 1/2” Square Drive, Reversible, Flat Head Pin • Equipped with Flat Head Pin for improved socket retention • Same Fastening Torque in forward and reverse rotation • Rubber Joint Construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact • Rubber Bumper protects material from damage • Easy to Operate On/Off Rocker Switch • 1-3/4” Wide Hook enables tool to be hung on rafters, pipes, etc. when not immediately in use • LED Light with Afterglow feature and Independent On/Off Switch • Ergonomic Soft Rubber Grip design for vibration absorption and comfortable operation
DDF481RTE 1/2” Cordless Drill / Driver with Brushless Motor Variable 2-Speed, Reversible • eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions • Battery fuel gauge indicates approximate remaining battery power • Brushless DC motor with high power to weight and size ratio • Brushless DC motor generates less heat buildup and is ideal for prolonged /use in manufacturing / production applications • Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life • 21 clutch settings deliver up to 1,090 in. lbs. of torque • All metal gears for more efficient power transmission • Ultra-compact design (only 8-1/8” long) • Dual LED job lights with afterglow feature • Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
impact wrenches
18
1/2” Drive Impact Sockets
These “Double Square” sockets are used on 1/2” drive impact wrenches when installing most pole line hardware.
8 Point Deep Well Part # Size Length 4772 3/8” 3-1/4” 4774 7/16” 3-1/4” 4776 1/2” 3-1/4” 4778 9/16” 3-1/4” 4780 5/8” 3-1/4” 4782 11/16” 3-1/4” 4784 3/4” 3-1/4”
6 Point Deep Well Part # Size 4912 3/8” 4914 7/16” 4916 1/2” 4918 9/16” 4920 5/8” 4922 11/16” 4924 3/4” 4926 13/16” 4928 7/8” 4930 15/16” 4932 1” 4934 1-1/16” 4936 1-1/8” 4938 1-3/16” 4940 1-1/4” 4942 1-5/16” 4944 1-3/8” 4946 1-7/16” 4948 1-1/2”
8 Point Deep Well Part # Size Length 4786 13/16” 3-1/4” 4788 7/8” 3-1/2” 4790 15/16” 3-1/2” 4792 1” 3-1/2” 4794 1-1/16” 3-1/2” 4796 1-1/8” 3-1/2”
1311SD 11 Piece 8 Point Impact Socket Set 1/2” Square Drive, Sizes 1/2” to 1-1/8”
12 Point Part # 4964 4966 4968 4970 4972 4974 4976 4978 4980 4982 4984 4986 4988 4990 4992 4994 4996 4998
6 Point Standard Part # Size 4812 3/8” 4814 7/16” 4816 1/2” 4818 9/16” 4820 5/8” 4822 11/16” 4824 3/4” 4826 13/16” 4828 7/8” 4830 15/16” 4832 1” 4834 1-1/16” 4836 1-1/8” 4838 1-3/16” 4840 1-1/4” 4842 1-5/16” 4844 1-3/8” 4846 1-7/16” 2018 1-1/2”
Deep Well Size 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1” 1-1/16” 1-1/8” 1-3/16” 1-1/4” 1-5/16” 1-3/8” 1-7/16” 1-1/2”
12 Point Part # 4864 4866 4868 4870 4872 4874 4876 4878 4880 4882 4884 4886 4888 4890 4892 4894 4896 4898
Standard Size 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1” 1-1/16” 1-1/8” 1-3/8” 1-1/4” 1-5/16” 1-3/8” 1-7/16” 1-1/2”
www.linestar.ca
1719D
19 Piece 12 Point Impact Socket Set 1/2” Square Drive, Sizes 3/8” to 1-1/2”
1312D
13 Piece 6 Point Impact Socket Set 1/2” Square Drive, Sizes 7/16” to 1-1/4” Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
19
Triple Square Impact Socket
1/2” Square Drive, 5” Long
Three square openings in one socket: - 3/4” (oversize) for 1/2” hardware - 1” for 5/8” hardware - 1-1/8” for 3/4” hardware • 13/16” diameter, 6” long hollow shaft allows use on long threaded bolts • Narrowed center allows easy grip with or without gloves • 7/16” hex quick-change adapter included • Length 7-3/4”, weight 2 lbs
Part # Sizes Z-081618S5 1” x 1-1/8”
Part # Sizes 23-26908-9900 1” x 1-1/8”
Double Square Sockets
NR1 Nut Runner
NR2 Nut Runner
49782 7/16” Hex to 3/4” Square Adapter
21111 7/16” Hex to 1” Square Adapter
This 4-way, 6” deep, socket has openings on both ends. One end accepts 3/4” and 13/16” square nuts while the other end is sized for 1” and 1-1/8” square nuts. The 7/16” hex to 3/4” square adapter is included.
impact wrenches
SPECIALITy SoCkETS & ADAPTERS
A larger, 3-way socket similar to the NR1 but for larger size hardware. The NR2 accepts 1-5/16” square nuts in one end and 1-1/8” & 1-1/2” square nuts on the other. The 7/16” hex to 1” square adapter is included.
9076
Penta Socket 1/2” Drive
7121
7/16” Hex to 1/2” Square Adapter For up to 300 foot pounds of torque.
QR-514
PHS-2
Alberta: British Columbia: Manitoba: Ontario:
Penta Socket on one end, 3/4”Hex Socket on other end. 1/2” Female Drive.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
1/2” Square Drive to 7/16” Quick Change Chuck
20 drills & auger bits
SPECIALITy SoCkETS & ADAPTERS Double Square Utility Socket Sets
Sockets have a black oxide finish and utilize proprietary impact quality steel. All sockets come with individual Blue Bully Hex Adapters (Best Adapter Available). Sockets are secured in easy mount casing that can be mounted in your vehicle or on any wall. 2758 Includes: Mounting Tray, Blue Bully Hex Adapters and 9/16”, 13/16”, 1” & 1-1/8” Sockets 2753 Includes: Mounting Tray, Blue Bully Hex Adapters and 13/16”, 7/8”, 1” & 1-1/8” Sockets
Double Shot Socket, 3/4” or 9/16” Hex
One Socket automatically changes from the 9/16” to 3/4” hex with press spring slide action. Just press on a 3/4” hex and 9/16” hex slides back. 21-R4C13-0000 • 1/2 inch square drive • Length = 3” • Weight = 12 oz • Hex socket openings: - 9/16” for 5/16” hardware - 3/4” for 3/8” hardware
Wood Owl auger bits Deep Cut Ship Augers Designed for making deep, smooth cuts in Utility Poles, Railroad Ties, Pressure-treated Lumber, Wet or Frozen Wood.
18”
Item # 08803 08804 08805 08806 08807 08808 08809 08810 98811
Diameter 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8”
9.5mm 11mm 13mm 14mm 16mm 17.5mm 19mm 21mm 22mm
Item # 08812 08813 08814 08815 08817 08818 08819
Diameter 15/16” 1” 1-1/16” 1-1/8” 1-1/4” 1-3/8” 1-1/2”
02390
Re sharpening File
24mm 25mm 27mm 29mm 32mm 35mm 38mm
Nail Eater Extreme Impact Auger Bits
www.linestar.ca
• • • • •
Quickly bore through creosoted and salt-treated utility poles Resists wear, eats throughnails and staples Self-feeding screw point draws the bit through the wood 7/16 IN hex shank to fit impact drivers Available in 18” overall length
Item # Diameter 70PT-11/16” 11/16 70PT-13/16” 13/16 71PT-11/16” 11/16 71PT-13/16” 13/16
Item # 37868 37869 37870 37871
Diameter 9/16” 11/16” 13/16” 15/16”
24” drill bits available • #05305 - 12” ext. #05306 - 18” ext. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
21
Low pressure hoses and fittings
Item # 135245 135247
Description Two 3/8” x 8’ (10 mm x 2.4 m) I.D. Hoses with 3/8” NPTF male fittings Two 3/8” x 10’ (10 mm x 3 m) I.D. Hoses with 3/8” NPTF male fittings
hydraulic tools
Rubber Low Pressure Hose, Orange, Non-Conductive • Certified non conductive orange rubber. • Double rayon braid. • Working pressure 2,250 psi (155 bar) tested to 75 kV/ft. for five minutes.
Low-Pressure Hydraulic Hose Couplers
2,250 psi hose is used with low pressure hydraulic tools. These hoses can be supplied with or without flat face couplers. Hose is non-conductive
NS-371-6FP Female Coupler 3/8” Internal Thread
NS-372-6FP Male Coupler 3/8” Internal Thread
Hydraulic Flow Valves & Intensifiers 10-1-SA
49913
Hydraulic Flow Control Valve Used to control the direction of the flow to the tools, forward or reverse. Includes couplers.
Hydraulic Intensifier This intensifier increases the pressure of the hydraulic system of a vehicle so that high-pressure tools can be operated without an additional power unit. It operates on either open or closed centre systems and has an optimum operating pressure of 1,800 psi at 6 gpm. Flow range is 4-7gpm. Includes a 10’ nonconductive, low-pressure twin-line hose and 8’ of high-pressure hose.
HFC30
Hydraulic Flow Control Valve Operates off of a vehicle’s hydraulic circuit. It can accept a flow of up to 30 gpm and reduce it to a maximum of 10 gpm allowing the correct flow to the hydraulic tool.
HB10
PVA0021
PVA0022
for Double Acting Tools
High-Pressure Hydraulic Control Valves These 4-way, 3-position valves can be connected directly to the tool or used remotely with hoses. Output side couplers included. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
for Single Acting Tools
Hydraulic Intensifier Works on both open and closed centre systems and produces 10,000 psi. Input pressure is from 1,000 to 2,000 psi and has a flow rate between 4 - 8 gpm. Couplers & hose sold separately.
hydraulic tools
22
Hydraulic PRUNERS The power-to-weight ratio of hydraulic tools is significantly higher than most gasoline powered tools, making them the popular choice among professional arborists, right-of-way crews and utilities. These hydraulic tools operate on either Open or Closed Centre systems and come with a standard 3/8” NPT Male Adapter.
CS28 Series Hydraulic Chain Saws This long reach saw has a 12” saw bar and an automatic chain oiling system. Available in overall lengths of either 75” or 90”.
• • • •
CS28811 90” Hydraulic Chain Saw CS28812 75” Hydraulic Chain Saw
Flow Rate 7 - 9 GPM Operating Pressure 1,000 - 2,000 PSI 75” Model Weighs 8.4 lbs. 90” Model Weighs 9 lbs.
CS25 Series Hydraulic Chain Saws Same as the CS28 but with a flow rate of 4-6 GPM CS25811 90” Hydraulic Chain Saw CS25812 75” Hydraulic Chain Saw
www.linestar.ca
CR27 Hydraulic Circular Saw This 79” long saw has a 9” blade on an angled head attached to a fibreglass pole. A blade brake reduces “coast-down” time.
• Flow Rate 5 - 7 GPM • Operating Pressure 1,000 - 2,000 PSI • Weighs 9.6 lbs.
43177 Hydraulic Chain Saw This long reach saw comes in a standard length of 88.5” with a 13” cutting capacity and weighs 9 lbs. Saws in lengths of 62.5” and 75” also are available. All models offer anti-kickback chain and automatic chain oiler. Insulated fibreglass tubes are tested to OSHA 1910.269.
• • • • •
Flow Rate 5 - 8 GPM Open or Closed Centre Hydraulic Systems Operating Pressure 1,000 - 2,000 PSI 62.5” Model Weighs 8.25 lbs. 75” Model Weighs 8.75 lbs.
43180 Hydraulic Circular Saw The 9” blade mounted on the angular head makes flush cuts easier and directs chips away from the operator. Safety features include hand stop collar, two-step trigger and branch stop. Fibreglass tubes are tested to meet OSHA regulation1910.269.
• • • • •
Flow Rate 4 - 6 GPM Open or Closed Centre Hydraulic Systems Operating Pressure 1,000 - 2,000 PSI 5,250 RPM at 6 GPM Weighs 9 lbs; Overall Length 82”
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
23
Hydraulic PRUNERS & Saws
• • • •
Flow Rate 5 - 8 GPM Open Centre Hydraulic System Operating Pressure 1,000 - 2,000 PSI Weighs 10.6 lbs; Overall Length 86”
hydraulic tools
48520 Hydraulic Utility Pruner Heavy cutting capacity cuts branches up to 2”. The full power return quickly forces the blades back open. Insulated fibreglass tubes are tested to OSHA 1910.269.
CS06620 Hydraulic Chain Saw This chain saw produces almost twice as much power as it’s gasoline engine counterparts but weighs only 6-1/4 lbs! Comes standard with a 15” bar but 12” & 20” models are available. Excellent saw for all types of wood cutting: Trees, Limbs, Timbers and Utility Poles. Automatic chain oiler, hand guards & low kickback bars are just some of the features. • Flow Rate 7 - 9 GPM • Operating Pressure 1,500 - 2,000 PSI • Overall Length 30”
CS05620 Hydraulic Chain Saw Same as the CS06620 but with a flow rate of 4-6 GPM
HPS513 Chain Saw Ideal for large trimming and cut-up removal jobs. The chain and bar can be adjusted without removing the sprocket cover. The handle can be adjusted from a horizontal position to 30 or 60 degrees relative to the bar and chain. Flow Rate 4 - 8 GPM Operating Pressure 1,000 - 2,000 PSI Weighs 8-1/2 lbs; Overall Length 26-1/2” Runs on Open or Closed Centre Hydraulic Systems Includes 12” Whip Hoses with 3/8” NPTF Ends
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
• • • • •
24
hydraulic tools
Hydraulic Breakers
Hydraulic Breakers
For scoring and cutting concrete, small rock breaking, rod driving and tamping. Hydraulic breakers have a lower noise level than pneumatic breakers and emit no exhaust. All models operate on pressures from 1,500 to 2,000 psi and come with whip hoses and flush-face, quick disconnect couplers.
Part # BR45550 BR45120 BR67120 BR87120
BR67120
Shank Size Flow Rate Weight Length
1” x 4-1/4” 1-1/8” x 6” 1-1/8” x 6” 1-1/8” x 6”
4 - 6 gpm 7 - 9 gpm 7 - 9 gpm 7 - 9 gpm
51 51 67 83
lbs lbs lbs lbs
25” 25” 27” 29”
Hydraulic Breakers
Ideal for breaking sidewalks and curbs and other demolition jobs, these breakers run on open-center hydraulic systems. High blow energy provides maximum breaking power yet these breakers have low noise and vibration levels. 12” whip hoses with 1/2” NPTF ends are included. These breakers are equipped with cushioned, spring-dampened handles that reduce the vibration transmitted to the operator by 80%-90%. The HPB45 models provide 2,160 bpm. The HPB55 model delivers 1,860 bpm. Couplers sold separately.
Part #
Shank Size Flow Rate Weight Length
HPB45-1AVS
www.linestar.ca
HPB45-1AVS 1-1/8” x 6” 5 - 8 gpm 53 lbs 28-1/2” HPB45-2AVS 1” x 4-1/4” 5 - 8 gpm 46 lbs 26-1/2” HPB55-1AVS 1-1/8” x 6” 5 - 8 gpm 55 lbs 30”
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
25
BREAKER ATTACHMENTS
Length * SHANK SIZE & PART # 3/4” 7/8” x 3-1/4” 1” x 4-1/4” 1-1/8” x 6” 12” 48-62-3000 - - 14” - - A11014 18” 48-62-3005 A11018 * Length under collar.
-- A21014 A21018
-A31014 A31018
Narrow Chisel
hydraulic tools
Used in small chipping hammers for light-duty jobs as well as heavy-duty breakers for the demolition and cutting of concrete and stone, these tools are made of heat-treated steel to stand up to the most demanding applications.
Length * SHANK SIZE & PART # 3/4” 7/8” x 3-1/4” 1” x 4-1/4” 1-1/8” x 6” 12” 48-62-3010 - - 14” - - A12014 18” 48-62-3015 A12018 * Length under collar.
-- A22014 A22018
Moil Point
-A32014 A32018
Length * SHANK SIZE & PART # 3/4” 7/8” x 3-1/4” 1” x 4-1/4” 1-1/8” x 6” 12” 48-62-3030 - - 14” - - A13014 18” - - A13018 * Length under collar.
-- A23014 A23018
-A33014 A33018
3” Chisel
Blade SHANK SIZE & PART # Width 3/4” 7/8” x 3-1/4” 1” x 4-1/4” 1-1/8” x 6” 4-1/2” 4 8-62-3040 B10200 5-1/2” - - B10300
B20200 B20300
B30200 B30300
Clay Spade
Rod SHANK SIZE & PART # Size 3/4” 7/8” x 3-1/4” 1” x 4-1/4” 1-1/8” x 6” 5/8” 48-62-3070 B12783 3/4” 48-62-3070 B12785 7/8” - - -- 1” - - --
B22783 B22785 B22787 B22789
B32783 B32785 B32787 B32789
Ground Rod Driver
Blade SHANK SIZE & PART # Width 3/4” 7/8” x 3-1/4” 1” x 4-1/4” 1-1/8” x 6” 48-62-3090 B10500
B20500
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
B30500
403-243-1900 604-594-2701 204-783-9771 905-564-5344
Asphalt Cutter
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
5”
canvas tool bags
26
Canvas Tool Bags Canvas Gear Bags with Heavy Vinyl coated reinforced bottoms for protection against abrasion Tool Bag 12” with #8 Canvas Canvas Tool Bag, Steel Frame, Web Handle Hard Bottom, Vinyl Reinforced, Leather Strap Closure
2114-14
2114-12
2114-12 12”L X 7.5”W X 12”H 2114-14 14”L X 7.5”W X 14”H 2114-20
2114-18
2114-18 18”L X 9”W X 12”H 2114-20 20”L X 9”W X 14”H
Tool Bag 22” with #4 Canvas, 2 Outside Pockets Canvas Tool Bag, Steel Frame, Web Handle Hard Bottom, Vinyl Reinforced, Leather Strap Closure 2175 22”L X 10”W X 18”H • Weight 7 lbs.
Heavy Duty Gear Bags 5181ORALS Vinyl Equipment Bag • One large, outside pocket with Velcro® fastening • Adjustable, padded shoulder strap • Durable, double-stitched plastic bottom • Convenient rain flap with Velcro® fastening • Two heavy-duty, slide-action buckles to conveniently close bag • Wide-opening, steel frame securely riveted to top of bag helps maintain bags shape
www.linestar.ca
5185ORA Lineman Backpack Orange • Wide opening easily accommodates helmets, belts and other equipment • Large front pocket for separate storage of gaffs, rubber gloves or other equipment • Padded back area • Durable, double stitched plastic bottom with drain holes • Adjustable padded shoulder straps with adjustable chest strap
2117-1PCAMO-F Tool Bag Tough water resistant vinyl fabric with a polymer plastic base, weather flap and large pocket. Leather strap closures and 2” webbing carry handles with box X reinforcement. 24”L x 10”W x 19”H
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
27
Heavy Duty Gear Bags Large Tool Bag with Wheels Nylon Cordura Tool Bag, Wheels, Shoulder Strap, Molded Plastic Bottom, Camo Design 24”L X 10”W X 19”H
canvas tool bags
2117-CAHDL
2190-1LOSP - Tool Bag 24” with Heavy Vinyl Coated Nylon & 1 Large O/S Pocket Heavy Vinyl Coated Nylon, Weather Flap, Web Handles, Hard Board Bottom, Vinyl Reinforcement, Leather Buckle Closure 24”L X 10”W X 19”H 2117-2HDL Large Tool Bag With Wheels 2117 series tool bags are wider than other bags and are made from heavy canvas or vinyl coated nylon which is water resistant and also very resistant to abrasion. The bottom is made from molded polymer plastic which gives additional water resistance. The 2” web handles are sewn completely to the bag. Box “X” stitches on the handles prevent tearing. There is one large outside pocket covered with a flap with snap fasteners. The “HDL” series have a set of wheels attached with an expandable handle that allows the bag to be pulled on its wheels rather than having to lift the bag. This is like the “roller board” luggage. This bag is vinyl with two outside pockets and a shoulder strap.
Round Canvas Tool Buckets These Heavy-Duty canvas bags are available with “Blackwrap” plastic reinforced walls that prevent the bags from “collapsing”. The molded plastic bottom protects against all kinds of weather. Canvas bucket made with heavy canvas construction. Solid continuous PVC ring in top and polypropylene rope.
1217 - Canvas Bucket Features an 8” x 8” inside pocket and has a molded rubber bottom. 12” Dia. x 15”H.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
11215 - Canvas Bucket With 4958 brass swivel snap. Features an 8” x 8” inside pocket and a leather bottom reinforced with masonite. 12” Dia. x 15”H
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
11217 - Canvas Bucket Features a polypropylene rope and an 8” x 8” inside pocket. Has a leather bottom which is reinforced with masonite. 12” Dia. x 15”H.
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
1215 - Canvas Bucket With 4958 brass swivel snap. Features an 8” x 8” inside pocket and has a molded rubber bottom. 12” Dia. x 15”H.
canvas tool bags
28
Round Canvas Tool Buckets 1230 - Mini Tool Bucket Can be used for connectors, nuts, and other small items. Can be set on desk or hung in vehicles for other uses. Great for satey awards. Diameter 5”. Height 7”.
2008-CAMO
Miniature Tool Bucket with Pockets, Forest Camo • 5” Dia. X 6”H • Weight 4 oz. The “Mini Tool Bucket” is used in the Power Utility Industry mainly as a promotional item.
1231 - Mini Tool Bucket with outside pockets Can be used for connectors, nuts, and other small items. Can be set on desk or hung in vehicles for other uses. Great for satey awards. Diameter 5”. Height 7”.
5171PS Heavy-Duty Tapered-Wall Buckets with Pockets Heavy duty canvas. Swivel snap. 4 outside pockets. 12” top diameter. 9” bottom diameter
309C - Canvas Bucket Heavy duty canvas. Steel top ring. Polypropylene. Rope with 4958 brass swivel snap. Molded rubber bottom. Inside glove strap. Diameter 9”. Height 11-1/2”.
5109PS Wide Straight-Walled Bucket with Pocket Heavy duty canvas. 75 lb. (34 kg) Max. Load Rating. High-density polyethylene top ring for strength and chemical resistance.
Specialty Tool Buckets & Bags
www.linestar.ca
These Heavy-Duty tool bags are made of a PVC impregnated, weatherproof fabric. They boast marine-proof rivets, industrial strength double nylon stitching and oversized zippers. Tools are stored vertically for easy identification. The hinged handle is rubber coated and all bags come with a non-slip, extra-wide padded shoulder strap.
5144HBS - Hard Body Oval Bucket Includes leather skinning knife sheath and 14 other interior pockets. Orange, non-conductive plastic exterior maintains bucket shape. Fabric constructed of rugged denier polyester to resist wear and tear on the jobsite. Black molded polypropylene bottom with drain holes. Alberta: British Columbia: Manitoba: Ontario:
1815-14-HB-HQ
Oversized Oval Tool Bucket Oversized Oval, Black Nylon Cordura Body, Handles Hard Body Liner, Inside and Outside Pockets. 15”L X 9”W X 9”H
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
2658-AMP
Ampact Tool Bag, Canvas Glove Bag Style Heavy Duty Canvas, Inside Pocket, Oversized Top. Flap, 10 Shell Loops, Snap Closures. 7”L X 6”W X 18”H
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
29
Specialty Tool Buckets & Bags
45150 - Line Hose Bag Made of heavy weight canvas. 3/8” polypropylene handle. Molded 12” bottom with drainage holes. Add Y to the end of the product number for yellow or O1 for Orange. Add S1 to order the bag with a snap. Solid PVC ring. Diameter-12”, Length-48”.
2007-AMP
Telephone Service Bucket, Snap Heavy Duty Canvas, Molded Top Ring and Bottom, Leather Rope Holes, Polypro Handle, Snap. 10” dia. X 12” H
45151 - Line Hose Bag Made of heavy weight canvas. 3/8” polypropylene handle. Molded 12” bottom with drainage holes. Add Y to the end of the product number for yellow or O1 for Orange. Add S1 to order the bag with a snap. Solid PVC ring. Diameter-12”, Length-60”.
canvas tool bags
These Heavy-Duty tool bags are made of a PVC impregnated, weatherproof fabric. They boast marine-proof rivets, industrial strength double nylon stitching and oversized zippers. Tools are stored vertically for easy identification. The hinged handle is rubber coated and all bags come with a non-slip, extra-wide padded shoulder strap.
Aerial Oval Tool Buckets These bags are basically the same as those on the opposite page but without web strap handles.
12169H1K - Canvas Bucket Heavy duty canvas. 12 inside pockets. PVC bumper to keep bucket from tilting. Molded rubber bottom. 2 PVC hooks. Length 14”, Width 6 1/2”, Height 10”.
Alberta: British Columbia: Manitoba: Ontario:
1807-3 Aerial Bucket for Bolt Cutters & Compression Tools Large Oval Compression Tool Bag. Hard Body Plastic, Dividers Form 5 Compartments. 16”L X 9”W X 20”H 1807-3HD 16”L X 9”W X 40”H phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
1820-HB-CL Aerial Tool Bucket with Hard Body & attached Cover Heavy Canvas Oval Bucket, Hard Body Plastic Liner. 15 Inside Pockets. 15”L X 7”W X 9”H
1815-14-2G Splicers Tool Bucket with 2 Grommets 14 Outside Pockets & 15 Inside Pockets. Carry Handles, Molded Bottom & 2 Grommets. 15”L x 7”W x 9”H
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
5144BHB Hard-Body Oval Bucket with Kickstand Kickstand for stability and proper orientation. Black molded polypropylene bottom with drain holes. Orange, non-conductive plastic exterior maintains bucket shape.
1820HB Aerial Tool Bucket with Hard Body Heavy Canvas Oval Bucket, Hard Body Plastic Liner. 15 Inside Pockets. 15”L X 7”W X 9”H
aerial bucket items
30
Aerial Bucket Tool Aprons
4500Y Aerial Basket Tool Apron Sewn in Stiffener. 2 pocket holster. Hammer loop. PVC cap bottom. 2 nut and bolt bags. 11 socket pockets. 2 PVC pipe inserts for auger bit holders. Length 23-7/8”, Width 4”, Height 21-3/4”.
4500YM2 Aerial Basket Tool Apron An aerial tool basket apron that features a magnetic strip that allows linemen to store loose hardware and easily access it when required.
1826
1829-HB-7 Aerial Tool Apron with Inosil & Hard body Features Inosil Corrosion Shield & Hard body Stiffener. Multiple Hand Tool Pockets, Bolt Cutter Sleeve & Drill Bit Holder. 23.9”L x 4”W x 21.25”H
Aerial Canvas Tool Apron 8 Hand Tool Pockets & 1 Pouch. 1 Quick Release Snap. 18”L x 4”W x 19.5”H
1825-BT
www.linestar.ca
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
51829M Aerial Apron with Magnet Sewn-in magnet design won’t catch on gloves. Includes ten hand tool pockets, two pouches, hammer loop and two drill bit holders. Two pouches reinforced with heavy duty rivets.
1825-BT-P
Aerial Apron to Hold Battery Operated Tools Yellow Vinyl Coated Nylon, 2 Grommets. Steel Frame, Bottom Reinforcement. 15.5”L X 4”W X 13”H
Alberta: British Columbia: Manitoba: Ontario:
1828 Aerial Canvas Tool Apron 7 Hand Tool Pockets & 1 Pouch. 3 Hammer Loops. 18”L x 4”W x 10.5”H
Aerial Apron to Hold Battery Operated Tools Yellow Vinyl Coated Nylon, 2 Grommets. Steel Frame, Bottom Reinforcement. 15.5”L X 4”W X 13”H
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
31
2401
2401-3
SH-1
SH-2
aerial bucket items
Aerial Bucket Hooks & Tool Boards
SH-5
Nylon, Polymer & PVC Bucket Hooks 2401 Yellow Polymer Hook for 2” Lip 11/16” 2401-3 Yellow Polymer Hook for 3” Lip 11/16” 2403 Nylon Polymer Hook for 3” Lip 5/8” SH-1 Red Nylon Single Hook for 2” Lip 3/4” Square SH-2 Red Nylon Single with Back Hook for 2” Lip 3/4” Square SH-3 Red Nylon Triple Hook for 2” Lip 3/4” Square SH-5 Red Nylon Triple with Back Hook for 2” Lip 3/4” Square
05-829-L
05-829-L Lighted Tool Board with Utility Bag 6.5 lbs. • One piece design fits both buckets with an without liners • Special designed bracket enables the tool boards to be easily installed and removed without tools • Each board has a four pocket leather tool pouch, leather knife pouch, nylon loops, and hammer loop • Utility bag is made from heavy duty cordura • A wide leather loop is riveted on the top of bag for easy access with rubber gloves • Also available with lights above the cordura bag and lights along the entire bottom of board. Ideal for night time and low light conditions. Battery and switch operated. 2AA batteries included. 05-829 Fiberglass Tool Board • New one piece design fits both buckets with and without liners. • Special designed bracket enables the tool boards to be easily installed and removed without tools. • Each board has a four pocket leather tool pouch, leather knife pouch and four nylon loops with cordura backing. • Utillity bag is made from heavy duty cordura. • A wide leather loop is riveted on the top for easy access with rubber gloves.
05-829
05-830 Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
05-830 Tool Board with Socket Holder 9 lbs. • Holds deep throat sockets from 1/2” to 1”
aerial bucket items
32
Aerial Bucket Tool Holders 05-831 Multi-Purpose Impact Wrench and Drill Holster
• • • • • •
Attaches to buckets with and without liners Holder can be mounted inside or outside Top bracket can be moved to either side to enable holder to be used right or left handed Two models to choose from Two drill bits can be stored in the multi-purpose holder Includes velcro hold down strap to keep wrench in place
4514 Fibreglass Chain Saw Scabbard The fibreglass chainsaw scabbard is designed to store your gas powered or hydraulic chainsaw from your aerial basket. It can be used to mount on the inside or outside of the basket. Overall length is 32”. Storage chamber is 6” x 3 1/4” x 17 1/2”.
05-832 Impact Wrench and Drill Holster
www.linestar.ca
4503 - Fibreglass Tool Holder Equipped with stream light base. Built in hanger to fit over 3 3/4” basket lip. Light sold separately. B2 bumper is available. Length 10”, Width 4-1/2”.
01-P-058-4 - Hot Stick Carriers--Boom Mounted Used to hold down the hot line insulator blanket on a pole top pin. Installation eye for mounting holder with shotgun stick. 12-1/2” x 8” x 9”
06-177 Boom Mounted Pruner/Saw Holder • Pruner / saw holder provides an excellent method for storage of hydraulic tools during line clearance work • Boom mounted tool holders are constructed with fibreglass laminates • Ratchet load binders with 1” wide nylon straps secures holders firmly to boom • Gravity type latch secures control end of tool and is easy to open and close • Unit adapts to square, rectangular, round and oval booms
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
33
2651
Compression Tool & Bolt Cutter Bag • 10”L X 3’W X 19”H • Weight 1 lb. 7 oz. Estex Compression tool and bolt cutter bags are made from heavyweight vinyl coated nylon with a heavy bottom reinforcement. There are several rivets inthe bottom edge for additional support. This version has two pockets for either two compression tools or one compression tool and one bolt cutter. The back is extended so the tool handles do not extend too high above the lip of the bucket.
4037
Compression Tool Holder Heavy duty orange vinyl and neoprene nylon bottom. Drainage hole in bottom. Grommet holes in top for suspension. Length 26” Width 10”
05-955 Hastings Durable Light Weight Tool Tray This durable poly tray is designed to hang on the outside of the bucket. The adjustable bracket eliminates the need for bucket hooks. Inside size: 20” x 6” x 7” Weight: 6.5 lbs • Color: White
05-951 Hastings Tool Tray Compact Lightweight outside mount tool tray. Ideal for connectors, bolts, nuts, etc. Tray fits buckets with or without liners. Dimensions: 7 1/2” X 6” X 14”
05-918-1
05-919-1
Extra Deep Tool Tray Lightweight poly tool tray fits buckets with and without liners. Outside mount.
1TB Shallow Plastic Tool Tray Made of high density polyethylene. Inside dimensions are 8” x 8” x 19”. 05-929-1 Bucket Tool Tray 20” with Dividers Other sizes are available. Attaches on outside of bucket. Tray has five compartments with removable partitions. Tray fits buckets with and without liners.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Inside - Outside Tool Tray Hangs on either outside or inside of bucket using standard hanger hooks (not included) 7-1/2” deep x 6” wide x 14” long
aerial bucket items
Aerial Bucket Tool Holders
aerial bucket items
34
AERIAL BASKET COVERS 2711Aerial Bucket Cover (1 Man) Fits All W/Lanyard & Snap • • • •
Black Vinyl Coated Nylon, Lanyard And Snap Bungee In Hem For Snug Fit Fits 24” X 24” to 24” X 36” Weight 4 lbs.
Estex bucket covers are made from heavy vinyl coated nylon (truck tarp material) for durability and water resistance. This model stretches to fit all one-man buckets. A rope lanyard with snap is attached to the cover to secure it to the truck. Adjustability allows you to reduce the number fo different sizes you have to stock.
2712Aerial Bucket Cover (2 Man) Fits All w/ Lanyard & Snap • • • •
Black Vinyl Coated Nylon Bungee In Hem, Lanyard & Snap Fits 24” X 36” to 28” X 52” Weight 5 lbs. 4 oz.
Estex bucket covers are made from heavy vinyl coated nylon (truck tarp material) for durability and water resistance. This model stretches to fit all one-man buckets. A rope lanyard with snap is attached to the cover to secure it to the truck. Adjustability allows you to reduce the number fo different sizes you have to stock.
2713-WC-24-24 Collapsible Bucket Cover
• Multiple sizes to fit YOUR aerial bucket • The best of 3 bucket covers in one convenient product
www.linestar.ca
Estex proudly presents the latest innovation in convenience and functionality for covering your Aerial Buckets. Our Patent-Pending Collapsible Bucket Covers combine the very best features of all covers currently available on the market. Rigid and sturdy like a hard cover, convenient and easy to store like a soft cover, and lightweight and economical like a foam-filled cover. This cover easily folds upon itself to fit into a bin or other tight space, while still including a rigid Polycomb Slate structure to prevent standing water on top of the bucket and provide lightweight durability. 1” webbing strap and alligator clip cinches to hold cover to the bucket tightly. Cover attaches with a rope lanyard and brass swivel snap to prevent flyaway.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
101SR High Elevation Self-Rescue System The Buckingham 101SR provides all the components required to self-rescue or if the need arises to rescue a fellow employee. The 101SR descender will automatically stop the user until the user compresses the handle allowing a smooth controlled descent. An additional built in (anti-panic) safety feature stops descent if the user compresses the handle too hard. This unit will allow the rescuer the advantage of lowering a hurt person with ease as well. The 101SR kit comes with retrofit rappelling straps that can be added to an existing harness for self-rescue. Available in different lengths: 101SR- 50 – 50’of 1/2” braided rope 101SR-75 – 75’ of 1/2” braided rope 101SR-100 – 100’ of 1/2” braided rope Rated to 310 lbs.
35
aerial bucket items
Aerial Bucket Escape & Rescue Systems
301SR Self Rescue System Self Rescue system that features a new lightweight, compact design. The lightweight descender is manufactured from aircraft grade aluminum and features an anti panic release brake which will stop the descender if the user releases or compresses the descender all the way. The TVAC descent line measures 6.8mm and is compact and stands up to heat on long descents. System is packed in a weather resistant nylon bag with mesh bottom to let moisture escape. Comes with two rappelling straps.
AERIAL BASKET RESCUE KIT Provides safe removal of injured personnel from aerial baskets • Boom strap with special coating to help prevent slipping - 55” • Small set of 2 sheave blocks with 75’ of 3/8” nylon rope • Waterproof storage container, 6” diameter x 18” long, so that blocks can be stored for quick and easy access
06-161 01-3318
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
06-165
pole climbing gear
36
body harnesses 1110841C - ExoFit™XP Arc Flash Harness
• • • • • • • • • • •
Designed to meet the specific needs of the utility industry Back web loop and front rescue loops Leather insulators behind hardware for reduced conductivity Ergonomic Nomex®/Kevlar® back, shoulder and leg padding always stays in place enhancing comfort and worker satisfaction – it’s even removable Superior “X” design padding wraps around the wearer for the ultimate in no-tangle donning Soft edging moves with you preventing uncomfortable rubbing or chafing enhancing comfort and mobility 7,000lb. Nylon webbing for added security One-handed quick connect buckles make putting on, adjusting and removing the harness a snap and provide a memory fit – adjust the harness once and it stays that way Torso buckles adjust easily, yet hold the straps firmly in place and complete the 5-point adjustment system Plated hardware for corrosion resistance Size = Large (Medium and X-Large also Available)
1110892C - ExoFit™XP Arc Flash/Flame Resistant • Harness designed to meet the specific needs of the utility industry • PVC coated back D-ring and hardware for reduced conductivity • Ergonomic Nomex®/Kevlar® back, shoulder and leg padding always stays in place enhancing comfort and worker satisfaction – it’s even removable • Superior “X” design padding wraps around the wearer for the ultimate in no-tangle donning • Soft edging moves with you preventing uncomfortable rubbing or chafing enhancing comfort and mobility • 7,000 lb. Nomex®/Kevlar® webbing for added flame resistance • PVC coated pass-thru chest, torso and leg buckles complete the 5-point adjustment system for simple and fast adjustment • Size = Large (Medium and X-Large also Available)
www.linestar.ca
Miller Revolution Arc-Rated Harnesses #RKNARRL-QC/UBK The Revolution Arc Rated Products are designed to protect workers from falls caused by electric arc-flash and arc-blast exposure when working at heights or in confined space applications near energized electrical sources.
Most harnesses are available with Kevlar® or fire retardant materials. Custom made harnesses can be made to your specifications using a variety of options. Call your nearest LineStar branch for more information! Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
37
390FRC Yates Construction Lineman Harness In conjunction with transmission line rope access pioneer, Reed Thorne of Ropes That Rescue and other western utilities like Pacific Gas & Electric, Yates has designed the 390FA harness to meet the needs of the transmission tower worker who is now utilizing rope access techniques. The 390FRC Harness is designed and recommended for helicopter external load short haul work. Many new features are seen in the New 390FRC harness. Cobra quick connect buckles on the waist portion of the harness, ANSI carabiner to attach chest to seat, diagonal rear support webbing to distribute the load from chest threw shoulder and down to the waist belt over the hips. Constructed from webbing which is a blend of Nomex in the exterior for comfort and durability and Kevlar in the interior for strength. Specially designed for the professional transmission tower worker. Wide anatomical waist pad for increased comfort and added back support. Modular work/tool pouch system allows the user to customize each harness to their own arrangement. Easily adjustable for variations in clothing by use of camlock and cobra buckles. Attachment points at waist, hips, chest, back (lumbar) and back (dorsal). Extra large side positioning rings (lineman style) allow the user to easily make connections to safety belt. New U shaped rear shoulder design distributes load evenly accross the neck of the user. New for 2015 milled Aluminum COBRA quick now used to connect waist belt to waist pad and to connect leg buckles for easy donning. COBRA buckles are ANSI Z359.1 -2007 certified. Designed for electric utilities helicopter short haul program. Weight 7lb. 7oz.
pole climbing gear
Body Harnesses
C69B9D8G7H00C BuckArticulator™ Harness The BuckArticulator™ is a ‘Y’ style harness that articulates in three places making it ideal for anyone that requires the user to bend, reach, twist and climb at heights, making it perfect for fall arrest, work positioning and Rescue. The BuckArticulator™ harness floats freely through the waist straps, while the body belt stays in position allowing for freedom of movement. This harness can be used by itself or the user can easily attach a lineman’s body belt. BuckArticulator™ meets the requirements of ANSI Z359, meets the ASTM-F887 Arc Flash requirements, and is CSA (C69A9D8G7H00) third party certified. C20182M Buck Mobility™ Belt This revolutionary belt offers a man rated upper belt strap that is bound to the lower work positions strap by 1 3/4” web. The four dee ring belt supports the use of wood pole fall restriction devices, like the New Buckingham SuperSqueeze™. Your back will thank you for the fully padded 8-3/4” high back. Class 1 Sizing.
Order Body Belts By Dee-Ring Size • See Page 38 Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
C20192M Short Back Mobility™ Belt This revolutionary belt offers a man rated upper belt strap that is bound to the lower work positioning strap by 1-3/4” web eliminating the lower strap which provides the user ultimate mobility and freedom of movement. Class 1 Sizing.
pole climbing gear
38
BUCKYARDs & body BELTs 8VV114 - Buckyard For full body harness with steel ring dorsal attachment. Expands to 42”. Interior materials stretch to reduce the arresting force to less than 900 lbs. 1706 locking snap hook on both ends. Length 4ft. 8V114S1+Z - Buckyard For full body harness w/web loop dorsal attachment. Expands to 42”. 1706 locking snap hook on one end and web loop on the other end. Interior materials stretch to reduce the arresting force to less than 900 lbs. Length 4ft. C2000M - Full Float Body Belt This is the finest belt available and is hand crafted of the highest quality leather. It features a full float body belt with a 5 1/2” foam cushioned pad reinforced with rawhide lace. The belt strap is leather with a nylon center to provide strength and longer life. The floating dees provide 4” lateral movement to reduce the wear on the pole strap. Available in Burgundy (BU), black (BL), or brown (BR). Weight 5.53 lbs. Add suffix ‘E’ to order a belt with 4 dee rings. 4 dee body belts are Patent Pending. Class 1 Sizing. C2000EM Body Belt Like the 2000M but with 4 Dee Rings Add the suffix “BR” for Brown, “BL” for Black or “BU” for Burgundy. CSA Approved C20003M - Backsaver Body Belt This is the 2000M belt as described above but has the added feature of an attached backsaver. The extra width provides support to the back helping to relieve strain. The backsaver helps hold the belt and dee rings in the perfect location and eliminates the possibility of sliding out of the belt. CSA Approved C20003EM - Body Belt Like the 20003M but with 4 Dee Rings Add the suffix “BR” for Brown, “BL” for Black or “BU” for Burgundy. CSA Approved 2012M - Light Weight Full Float Body Belt A light weight full float body belt with a 5” Dri-lex® lined cushion pad designed to wick mositure away from the user. This belt comes standard with a tongue & buckle strap but is available with a “Quick Disconnect” strap by adding a “K” to the part number. 2014M - Body Belt Like the 2012M but with 4 Dee Rings
www.linestar.ca
2013M - Light Weight Full Float Body Belt A light weight full float body belt with an 8” backsaver to provide support and relieve lower back strain. It is also available with the “Quick Disconnect” strap by adding the “K” suffix. 2015M - Body Belt like the 2013M but with 4 Dee Rings Order Body Belts by Dee-Ring Size • See Page 38 Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
39
C2019M - Light Weight Full Float Body Belt A new version of the Buckingham Dri-lex® lined body belt with stacked dee rings. Lightweight Dri-lex® liner wicks moisture and keeps user cool. Ideal for use with a secondary lanyard. Class 2 Sizing.
pole climbing gear
body belts
C2107M - 4 Dee Body Belt The stacked 2107M 4 Dee Body Belt features: 2 large full float double bar dee rings 2 small dee rings 228.6mm (9”) padded back pad Removable MAN RATED gut strap (Must be used with a Buckingham provided MAN RATED gut strap) Weighs 9.2 lbs Available in burgundy (BU), black (BL) or brown (BR). Patent Pending Class 1 Sizing Add the suffix “BR” for Brown, “BL” for Black or “BU” for Burgundy
C2100M - 4 Dee Body Belt The Stacked 2100M 4 Dee Body Belt features: 2 large full float double bar dee rings 2 small dee rings 228.6mm (9”) back pad Waist strap only; no upper gut strap weighs 7.32 lbs Available in burgundy (BU), black (BL) or brown (BR). 4 Dee Body Belts are Patent Pending. Class 1 Sizing. Add the suffix “BR” for Brown, “BL” for Black or “BU” for Burgundy
C2018M - Light Weight Full Float Body Belt A new version of the Buckingham Dri-lex® lined body belt with stacked dee rings. Lightweight Dri-lex® liner wicks moisture and keeps user cool. Ideal for use with a secondary lanyard. Class 2 Sizing.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Order Body Belts By Dee-Ring Size • See Page 38
pole climbing gear
40
Types of Body Belts All LineStar body belts meet applicable OSHA standards, 1910.268 and 1926.959, the ASTM F887 standard plus all consensus and governing standards. Every Buckingham body belt is designed to provide the user with maximum comfort, safety and the necessary belt accessories. Body belts are designed for work positioning and not intended for fall arrest. All body belts come with pouch tabs, a tape thong, knife snap, sleeve bag ring, gut strap rings, and tool loops. Plus all neoprene impregnated waist straps have 9 holes punched in the waist strap to accommodate for adjustment of heavy clothing in the winter. LineStar body belts are tested to 350 lbs. A person who’s weight and tools do not exceed 350 lbs. can work safely. There is a surcharge for persons requiring a body belt larger than size 30 or smaller than size 18. Special sized body belts
The full float body belt allows the dee rings to shift approximately 4” and the waist strap is stationary.
On Semi-float body belts the dee rings are stationary and the waist strap shifts within the back pad.
How To Size A Body Belt
The most critical measurement of a body belt, in terms of comfort, is the dee measurement. The proper dee size is normally found by measuring from the prominent part of one hip bone around the back to the same point on the other hip bone. Add 2” (51mm) for padded belts and 4” (102mm) for lightweight dri-lex belts so that the dee ring heels are just forward of the hip bones not on them. All measuring should be done over clothing to be worn under the belt. Normal combinations of dee and belt measurements are shown on the next page. X - Distance from waist to top of hip bone to where body belt is worn. Y - Measurement is from front of hip bone around the back to the front of the other hip bone. Measure - (“Y” distance) is hip to hip and add 2 inches to padded belts and 4” for lightweight dri-lex belts. This measurement is the Dee size.
www.linestar.ca
Rule of Thumb - Measure from seam of pant, around buttocks to other seam and add 2 inches to padded belts and 4 inches to lightweight dri-lex belts.
The 6087 sizing belt ensures accurate dee measurement. This belt is designed to provide the user with an exact hip to hip measurement. For proper belt size add 2 inches to padded belts and 4 inches to lightweight dri-lex belts.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
41
body belt sizing
Belt Strap* Belt Strap Dee Size Min Centre Hole In. cm. In. cm. In. cm. D18 46 32 81 36 91 D19 48 33 84 37 94 D20 51 34 86 38 97 D21 53 36 91 40 102 D22 56 37 94 41 104 D23 58 38 97 42 107 D24 61 40 102 44 112 D25 64 41 104 45 114 D26 66 42 107 46 117 D27 69 44 112 48 122 D28 71 45 114 49 125 D29 74 46 117 50 127 D30 76 47 119 51 130 *Belt Strap Is Not Waist Size.
Belt Strap Max No. of Tool In. cm. Loops 40 102 3 41 104 3 42 107 3 44 112 4 45 114 4 46 117 4 48 122 4 49 125 4 50 127 4 52 132 4 53 135 4 54 137 4 55 140 4
pole climbing gear
Types of Body Belts
body belt information
For a left handed belt add a ‘0’ suffix to belt size; e.g. 2000M-220 Inspect Your Body Belt Prior To Every Use For: • cracks, nicks, distortion, or corrosion of hardware • loose stitching, broken threads or burns • loose or worn rivets • loose grommets or elongated holes on waist strap • worn material • broken accessory snap or ring • tool loops worn to allow tools to fall free An extra hole was punched to fit a larger user. • pocket tabs that won’t support pouches and tools Immediately remove the belt from service if any of these conditions exist. Never: • modify or punch a hole in a support component of the body belt. • use a body belt made of all leather. • disconnect waist strap and rely on gut strap or suspenders (suspenders & gut straps are rated to maximum of 25 lbs.). • use an accessory ring, snap or suspender rings for work positioning.
LineStar Strongly Recommends the Use of Locking Snap Hooks! Do Not Use Improperly Configured Dee Rings when using a positioning strap with non-locking snap hooks
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
Use Properly Shaped Dee Rings When Using Non-locking Snap Hooks
pole climbing gear
42
body belt accessories 4201 - Deluxe Removable Gut Strap An economical way of adding extra dee rings to an existing 2 dee ring body belt for the use of a secondary lanyard. Straps attach under the body belt to meet the “Man Rating” of the dee rings. An extra-wide, adjustable Velcro strap provides comfort and a tight fit. The back has a Velcro closure pocket that can hold extra padding, ice or heat pack. Back pocket with removeable pad
4202 - Removable Gut Strap Same as the 4201 but without the back pocket.
C6263 - Man Rated Gut Strap Add this gut strap to your existing belt for an extra 2 dee rings for use with a secondary lanyard.
6256 - Gut Strap Nylon supporter with wide leather pad.
6257 - Gut Strap 1-3/4” leather supporter without pad. Add the suffix “BR” for Brown, “BL” for Black
www.linestar.ca
62531 - Drilex Gut Strap Drilex gut strap designed for comfort and functionality. Sponge lined pad relieves irritation when bending. Connection straps and snaps slide on the waist strap for aligning to suspension dee rings on a body belt. Each strap supports up to 25 lbs.
6258 - Suspenders Adjustable belt supporter made of 3/4” leather with moveable shoulder pads. 6259 - Suspenders Made of 1” Nylon Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
43
45702P1S2 - Equipment Storage Pouch Attaches to Buckingham Deluxe Series, Glide, or Arborlite saddles, Elastic retainer prevents equipment from falling out, two attachment snaps, 9” L x 10” H x 3” W, also available one 3/4” steel dee ring.
4570B2
Quick Release Snap Real Leather Top & Bottom Reinforcement 8.5”W X 10”H X 3”D Weight 9 oz.
4570M2
Black Canvas Nut & Bolt Pouch with straps & snaps, 9” x 10”. Available with magnetic strip.
Nut & Bolt Pouch with Magnetic Strip, straps & snaps. 9” wide x 10” deep. 4570M2-B2 black canvas.
5299-BR
84540
Bolt Bag with Compartment for Glasses
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
45911M2
Nut & Bolt Pouch with Magnetic Strip, straps & snaps. Cotter key holders, 1 inside pocket, reinforced sides and bottom. 8” wide x 9” deep.
4595M2 - Nut and Bolt Bag The best built nut and bolt bag designed for many small parts that can be easily inserted and removed. Measuring 3”W x 9”H x 9”L , it is bigger than most bags. There is a plastic liner on the bottom of the bag to help keep the bag open and makes picking up small parts easier. A 2-1/8” long magnet can be used to stow metal hardware for easy access. A 2-1/2”x 3-1/2” outside pocket can be used for storage.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Leather Nut & Bolt Pouch Strong pliable lightweight leather, ideal for maintenance and repair work. Leather straps w/grommet reinforced holes. Length-9”, Width-3”, Height-10”. 5299-BL Available in Black.
1061-1 Nut & Bolt Bag, Vinyl, Fire Retardent
• • • •
pole climbing gear
Body Belt Pouches & Bags
44 pole climbing gear
body belt tool holsters
422666-BL
49261
Short-Back, 5 Pocket Tool Holster with Skinning Knife Pouch
4 Pocket Tool Holster
42266
5 Pocket Tool Holster
To order left handed tool holsters, add “LH” to end of the part number.
111HLS
4089
4 Pocket Tool Holster
Skinning Knife Holster
www.linestar.ca
2402 - Breakaway Belt Hook
6104 - Wrench Holder
A Lowell wrench holder constructed of heavy leather and a steel bracket. Secure the wrench holder to the body belt pouch tab easily and quickly with the barrel fasteners provided. (Wrench is not included).
A nylon handline carrier with a hole to easily secure it to the body belt with a bolt or zip tie, that will straighten when approximately 14-18 lbs of pressure is applied, allowing the handline to pull free.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
111HLDS
5 Pocket Tool Holster
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
The “SUPERSqUEEZE” Wood Pole Fall Protection System wood fall protection The SuperSqueeze provides pole fall protection while climbing on wood poles. Both styles offer easy one-handed
45
pole climbing gear
pole climbing gear
WooD PoLE FALL PRoTECTIon
adjustment and can be configured for either right-handed or left-handed use. All straps & ropes have a red centre to warn the The user“SUPERSqUEEZE” of excessive wear. Wood Worn or damaged components can be easily replaced in the field. Pole Fall Protection System The SuperSqueeze provides fall protection while climbing on wood poles. Both styles offer easy one-handed adjustment and can be configured for either right-handed or left-handed use. All straps & ropes have a red centre to warn the user of excessive wear. Worn or damaged components can be easily replaced in the field.
CSq2488R - SuperSqueeze With Rope Strap for Distribution poles.
CSq2488W2 - SuperSqueeze With Web Strap for Distribution poles.
CSq2488RT - SuperSqueeze CSq2488R - SuperSqueeze With Rope Strap for Transmission poles. With rope strap for distribution poles. CSQ2488DRMS - SuperSqueeze With rope strap for distribution poles c/w snap hooks. CSq2488RT - SuperSqueeze With rope strap for transmission poles. CSQ2488TRTS - SuperSqueeze With rope strap for transmission poles c/w snap hooks.
CSq2488TW2 - SuperSqueeze CSq2488W2 - SuperSqueeze With Web Strap for Transmission poles. With web strap for distribution poles. CSQ2488DWDS - SuperSqueeze With web strap for distribution poles c/w snap hooks. CSq2488TW2 - SuperSqueeze With web strap for transmission poles. CSQ2488TWTS - SuperSqueeze With web strap for transmission poles c/w snap hooks.
Easy one-handed adjustments for the pole diameter as well as the users distance from the pole.
If the user cuts out, the straps squeeze the pole, securing the user and preventing a fall.
C9-10 - Buckadjuster For 10’ lanyard for Transmission
C9-7Q3 - Buckadjuster for distribution C9-10Q3 - Buckadjuster for The length of this 1/2” x 7’ rope lanyard is easily adjustable with transmission one hand using the attached length adjusting device. Used as a For 10’ lanyard for Transmission secondary strap when climbing over Columbia: obstacles. British phone: 604-594-2701 • fax: 604-594-2751 Alberta: phone: 403-243-1900 • fax: 403-243-2063 Canadian Saskatchewan/Manitoba: phone: 204-783-9771 • fax: 204-783-8951 Owned Alberta: phone: 403-243-1900 •
[email protected] British Columbia: phone: 604-594-2701 •
[email protected] Canadian Manitoba: phone: 204-783-9771 •
[email protected] Ontario: phone: 905-564-5344 •
[email protected] Owned
100%
100%
www.linestar.ca
www.linestar.ca
C9-7 - Buckadjuster The length of this 1/2” x 7’ rope lanyard is easily adjustable with one hand using the attached length adjusting device. Used as a secondary strap when climbing over obstacles.
pole climbing gear
46
wood pole fall protection
1204057 - Cynch-Lok Pole Climbing Device - Rope
• Lightweight pole climbing design • For distribution pole sizes 5.5” dia./17.5” circ. (14/45cm) minimum, 18.5” dia/58” circ. (47/147cm) maximum. • Extremely durable pole strap with wear indicator • One-handed effortless adjustment • Pinch-free ergonomic grips • Stopping cleat and carabiner • Durable kernmantle rope with wear indicator • Abrasion resistant sleeve • Lightweight and durable rope adjuster • Modular design with field replaceable straps 1204075 - Cynch-Lok Pole • Protected labels, equipped with i-Safe Climbing Device - Web
Cynch-Lok™ was developed with help from real pole climbers and features effortless adjustment and “cynches” around the pole during a “cut-out.” Cynch-Lok™ meets CSA Z259.14 standards for Type A and AB (dry, wet and icy poles) and ASTM F887. Cynch-Lok™ allows you to easily hitch-hike poles (move or jump the strap upwards) with a hand position that’s comfortable. It also moves past obstacles without difficulty. Exterior straps can easily be swapped out in the field depending on pole size, eliminating the need for multiple systems.
Pole Choker 4
The Choker Strap is a key component of the Jelco Pole Choker 4 Fall Prevention System. This 1 3/4 inch wide, yellow nylon strap squeezes the pole, the roller’s teeth dig in and you get the additional resistance provided by 2 sets of grippers. All this provides the gripping force required to prevent you from falling down the pole. If you would like a video, demonstration or training on the Jelco Pole Choker, please call 888.474.9628.
03704 - 4.5 ft., 1.6 M
03706 - 6.2 ft., 1.9 M
www.linestar.ca
Petzl GRILLON HOOK Adjustable work positioning lanyard with HOOK connector The Petzl GRILLON HOOK adjustable lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Its HOOK connector is ideal for using the lanyard in double mode on the harness side attachment points. • Lanyard with fine adjustment system for precise work positioning • Used in double mode on the harness side attachment points to distribute the weight on the belt (user has weight on his feet): length is adjusted by pressing on the pivoting cam • May be used in single mode on the harness ventral attachment point to distribute weight between the waistbelt and the leg loops (user is suspended): length is adjusted by operating the handle while holding the free end of the lanyard • Removable protective sheath protects the rope from abrasive contact and enhances rope glide. The protection can be removed for single mode use, to bring the user closer to the anchor • Available in four lengths: 2, 3, 4 and 5m Length Alberta: British Columbia: Manitoba: Ontario:
L52H 002 L52H 003 L52H 004 L52H 005 2 m 3 m 4 m 5m phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
47
Accessories for Buckingham BuckAlloy Aluminum Climbers Buckingham has developed the Aluminum Climber to provide strong, lightweight comfort for total confidence while climbing. You’re the best in the field! Shouldn’t you wear the best? Benefits: • Rated to 350 lbs • Exceeds ASTM F887 • Most durable aluminum climber available • Unmatched comfort in an aluminum climber • Off-set replaceable gaff pole climbers • Lightest Aluminum climber available • Aluminum alloy used in transport applications including marine, automotive and aviation due to its high strength to density ratio • Alloy blend contributes to superior product life cycle • Dowel and screw design allows for easy gaff change out • Made in the USA • Chrome for your feet!
A94089A -
Aluminum climber with attached hook & loop black foot strap and shown with 32021C hook & loop Big Buck wrap pad. Other available pads include: 350321C, 35021C.
pole climbing gear
Buckingham Aluminum Climbers
35021C
Wrap pad with cinch
32021C
35021
Wrap pad with cinch
Without Cinch
32021
Without Cinch
Easy to replace climber strap - no riveting needed
A94089A with an A21391 Nylon bottom strap
Beveled Stirrup to fit the bottom of the boot If ordering the BuckAlloy to use with an existing set of climber pads that incorporate a steel insert Model 50321 must be ordered to replace the existing insert
350321
C pad with Steel Insert
Beveled Stirrup to fit the bottom of the boot
Gaff Ridge Position (GRiP) • Keeps the gaff pointed toward the heart of the pole which aids in preventing cutouts • Allows for a better, more comfortable setting of the foot and arch • Allows optimum gaff placement on the pole and promotes ease of climbing
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
48
pole climbing gear
buckingham titanium pole climbers Strong as steel, but lightweight like aluminium Climbers with Contoured Shanks and Screw-Type Replaceable Gaffs Part # TB92089A TB92059A TB94089A TB94059A Straight Stirrup
Offset Non-Contoured Stirrup Shank
Contoured Shank
Screw-Type Gaff
Stirrup Foot Leg Pads Style Straps Straps Straight 21391 -- -Straight 21391 2239 3122 Offset 21391 -- -Offset 21391 2239 3122
Climbers with Contoured Shanks and Screw-Type Replaceable CCA Gaffs Part # TB90089A TB90059A TB91089A TB91059A
Stirrup Foot Leg Pads Style Straps Straps Straight 21391 -- -Straight 21391 2239 3122 Offset 21391 -- -Offset 21391 2239 3122
Climbers with Contoured Shanks and Permanent Gaffs Part # TB9646 TB86469 TB98479 TB87479
Stirrup Foot Leg Pads Style Straps Straps Straight 21341 -- -Straight 21391 2239 3122 Offset 21391 -- -Offset 21391 2239 3122
Climbers with Contoured Shanks and Permanent CCA Gaffs Part # TB90079 TB80059 TB91079 TB81059
www.linestar.ca
Shown with Foot Straps
For Twisted Shanks, add “T” to the part number Tree Climbers are available in most styles. Many other options are available. Contact your nearest Linestar branch for more information Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Stirrup Foot Leg Pads Style Straps Straps Straight 21391 -- -Straight 21391 2239 3122 Offset 21391 -- -Offset 21391 2239 3122
REPLACEMENT GAFFS FOR CLIMBERS DATED DEC, 2010 AND BEFORE
REPLACEMENT GAFFS FOR CLIMBERS DATED JAN, 2011 AND AFTER
Standard Gaffs T9206A CCA Gaffs T9106A
Standard Gaffs NB9206A CCA Gaffs NB9106A
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
49
Draw-forged from high strength steel Steel Climbers with Contoured Shanks and Screw-Type Replaceable Gaffs Part # SB92089A SB92059A SB94089A SB94059A
Stirrup Foot Leg Pads Style Straps Straps Straight 21391 -- -Straight 21391 2239 3122 Offset 21391 -- -Offset 21391 2239 3122
Shown with Foot Straps
pole climbing gear
buckingham STEEL pole climbers
Steel Climbers with Contoured Shanks and Screw-Type Replaceable CCA Gaffs Part # SB90089A SB90059A SB91089A SB91059A
Stirrup Foot Leg Pads Style Straps Straps Straight 21391 -- -Straight 21391 2239 3122 Offset 21391 -- -Offset 21391 2239 3122
Steel Climbers with Contoured Shanks and Permanent Gaffs Part # 9847 87479 98479 8747
Stirrup Foot Leg Pads Style Straps Straps Offset 21341 -- -Offset 21391 2239 3122 Offset 21391 -- -Offset 21341 2239 3122
3122 Pad
Steel Climbers with Contoured Shanks and Permanent CCA Gaffs Part # 90079 80059 91079 81059
Stirrup Foot Leg Pads Style Straps Straps Straight 21391 -- -Straight 21391 2239 3122 Offset 21391 -- -Offset 21391 2239 3122
REPLACEMENT GAFFS FOR CLIMBERS DATED JAN, 2011 AND AFTER NB9206A Standard Gaffs NB9106A CCA Gaffs
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
21391 Nylon Foot Strap, 1” x 26” 21341 Leather Foot Strap, 1” x 26” For Twisted Shanks, add “T” to the part number. Tree Climbers are available in most styles. Many other options are available.
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
REPLACEMENT GAFFS FOR CLIMBERS DATED DEC, 2010 AND BEFORE T9206A Standard Gaffs T9106A CCA Gaffs
2239 Nylon Leg Strap, 1” x 22” 2234 Leather Leg Strap, 1” x 22”
pole climbing gear
50
buckingham pole climber pads & straps
3500C
3118 - Big Buck™ Climber Pad The 3118 Big Buck™ climber pad utilizes a double strap system, that fits 1” and 1-1/4” straps, to secure the pad to the calf resulting in superior support of the leg. An angled metal insert prevents the climber shank from shifting on the calf and the thick felt padding adds to the overall comfort. Comes with 2 pair of straps (Big Buck pads require 2 pair of leg straps). of Measures 9”H x 12 1/2”W.
3502
The newly re-designed 3502 has a formed sleeve loop which prevents the climber from twisting out of the steel insert.
Part # Velcro Wrap Pads 3500 Standard 4” Velcro Wrap Pad 3502 3500 with Angled Metal Inserts 3503 Standard 3” Velcro Wrap Pad 3504 3500 with Straight Metal Inserts Add “C” suffix to order with Cinch Loop To fit Klein Climbers add suffix “KL” to the model number
3122
3124
3202C - Big Buck™ Climber Pad
This pad incorporates the adjustability of Velcro and the increased surface area of the 3118 pad. It also comes with the cinch loop for a tight fit.
3125
3126
3127
www.linestar.ca
35032 Part # Climber Straps with Buckle Pads 21391 1” x 26” Two Piece Nylon Foot Strap 21341 1” x 26” Two Piece Leather Foot Strap 2239 1” x 22” Single Piece Nylon Foot Strap 2639 1” x 24” Single Piece Nylon Leg Strap 2649 1” x 26” Single Piece Nylon Leg Strap 2644 1” x 26” Single Piece Leather Leg Strap
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Part # Climber Straps with Buckle Pads 3122 “L” Pad, 3 Loops, Shank Tunnel 3124 “T” Pad, Strap & Shank Tunnel 3125 “L” Pad, 3 Loops, Shank Tunnel 3126 “L” Pad, 3 Loops, Shank Tunnel, Extra Padding 3127 8” Wide Pad, Dual Straps, Strap/Shank Tun 35032 “C” Wrap Pad, Angled Steel Insert, Extra Padding 35034 “C” Wrap Pad, Straight Steel Insert, Extra Padding
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
51
KG-2 Klein Gaff Sharpening Kit for Pole & Tree Climbers
Contains the following: 8” fine-tooth file, 3” honing stone, gaff gauge, fully-illustrated gaff sharpener instructions, handy rll-up canvas case with tie.
6025 Buckingham Gaff Maintenance Kit
27 Gaff Shaping Kit
Tools and gauge for inspecting and performing pole gaff maintenance. Includes a smooth, single cut file, pole gaff guage and finishing hone.
Bashlin’s gaff shaping kit combines all the tools you need to properly care for the gaffs on your Bashlin climbers in a compact kit. It includes a gaff guage, 6” mill file with wooden handle, sharpening stone and instuctions.
pole climbing gear
POLE CLIMBER ACCESSORIES
KG-1 Klein Gaff Gauge for Pole Tree Climbers
CLIMBER SLEEVES Changes the overall length of adjustable length climbers.
• For the purpse of checking proper width, thickness and point profile of climber gaffs. • Serves as a guide for shapening gaffs. • Instructions included.
9202 Long Sleeve
Adjusts from 14-1/4” to 171/4”
5 Bashlin Gaff Gauge
Bashlin’s gaff gauge is used to maintain the correct shape, taper and profile of your gaffs. Instructions are included.
9204 Standard Sleeve
Adjusts from 19-1/4” to 213/4”
6303 - Pole Gaff Gauge
New and improved pole gaff gauge that can also gauge CCA gaffs; includes instructions.
60094 Gaff Guards
Leather with velcro strap fasteners.
6909U Gaff Guards 6909M2 Magnetic Gaff Guard
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Introducing our new magnetic gaff guard! It features a strong magnet that keeps it securely attached to all manufacturers pole and tree gaffs. Lime green makes it easy to find in the field.
Plastic coated clip-on for permanent or replaceable gaffs. Fits all brands of climbers.
pole climbing gear
52
Buckingham Replacement Gaffs Part #
Pin Style
Screw Style
Replacement Gaffs
9106 9306 T9106A T9206A NB9206A NB9106A
1-11/16” CCA Pole Gaff, Pin Style 2-1/4” Tree Gaffs, Pin Style 1-11/16” 16o CCA Pole Gaffs, Screw Style, Dec 2010 & Before 1-5/8” 16o Pole Gaffs, Screw Style, Dec 2010 & Before 1-11/16” 16o CCA Pole Gaffs, Screw Style, Jan 2011 & After 1-5/8” 16o CCA Pole Gaffs, Screw Style, Jan 2011 & After
BASHLIN POLE CLIMBERS Aluminium Pole Climbers offset climbers with 1-5/8” replaceable gaffs. Weighs 30% less than steel climbers. Part # BD14-1N BD14-2N BD14-3N BD14-4N BD14-5N
Shank Foot Leg Pads Style Straps Straps Offset x -- -Offset x x -Offset x x # 110D Offset x x # 130D Offset x x # 140DS
Steel Pole Climbers offset climbers with 1-5/8” replaceable, steel gaffs.
www.linestar.ca
BD16BC Twisted Shank
Part # BD16B-1N BD16B-2N BD16B-3N BD16B-4N BD16B-5N BD16BC-1N BD16BC-2N BD16BC-3N BD16BC-4N BD16BC-5N
Shank Foot Leg Pads Style Straps Straps Offset x -- -Offset x x -Offset x x # 110D Offset x x # 130D Offset x x # 140DS Twisted x -- -Twisted x x -Twisted x x # 110D Twisted x x # 130D Twisted x x # 140DS
Tree Climbers are available in most styles. Many other options are available including CCA Pole Gaffs. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
53
Pole Climbers with Gaffs – Without Pads and Straps Secure sleeve and leg iron connection. Two slotted hex-head bolts with lock washers and barrel-type nuts join the steel sleeve and leg iron together. Steel split ring secures ankle strap in place and allows for quick replacement. 4-7/16” (113 mm) wide stirrup provides greater foot support. Adjustable climber length – steel sleeve moves in 1/4” (6 mm) increments for the most comfortable fit. Contoured leg irons help position gaffs securely and comfortably.Replaceable gaff firmly attaches to the leg iron with a center pin and two TORX® screws. To determine size needed, measure from instep to 1” (25 mm) below knee. Sold in pairs only.
pole climbing gear
KLEIN pole climbers
Part # Adjustment Gaff Length Size Weight 1907AR 15” - 19” 2-3/4” 4.85 lbs. 1907ARL 17” - 21” 2-3/4” 4.95 lbs. 1972AR 15” - 19” 1-1/2” 4.50 lbs. 1972ARL 17” - 21” 1-1/2” 4.85 lbs. 1986AR 15” - 19” 1-9/16” 4.50 lbs.
Pole Climbers with Gaffs – Complete Set 8” x 8” (203 x 203 mm) cushioned, high-grade leather climber pads for maximum comfort. Neoprene-impregnated nylon climber straps for long-lasting life. Secure sleeve and leg iron connection. Two slotted hex-head bolts with lock washers and barrel-type nuts join the steel sleeve and leg iron together. Steel split ring secures ankle strap in place and allows for quick replacement. 4-7/16” (113 mm) wide stirrup provides greater foot support. Adjustable climber length – steel sleeve moves in 1/4” (6 mm) increments for the most comfortable fit. Contoured leg irons help position gaffs securely and comfortably. Replaceable gaff firmly attaches to the leg iron with a center pin and two TORX® screws. To determine size needed, measure from instep to 1” (25 mm) below knee. Sold in pairs only.
Tree Climbers are available in most styles. Many other options are available including CCA Pole Gaffs. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Part # Adjustment Gaff Length Size Weight CN1907AR 15” - 19” 2-3/4” 6.20 lbs. CN1907ARL 17” - 21” 2-3/4” 6.75 lbs. CN1972AR 15” - 19” 1-1/2” 6 lbs. CN1972ARL 17” - 21” 1-1/2” 6.25 lbs. CN1986AR 15” - 19” 1-9/16” 6.20 lbs. CN1986ARL 17” - 21” 1-9/16” 6.35 lbs.
pole climbing gear
54
BASHLIN POLE CLIMBER ACCESSORIES 145 Series Pads
130D
140D
150T
Part # Climber Pads 130D “L” Pad with Loops 140D “Wing” Pad with Shank Tunnel 150T “T” Pad with Loops Add “S” suffix to the above for padding
Single Piece Leg Strap
Big on comfort and climber control. This field proven, double strap design results in an extremely comfortable pad with tremendous climber support.
Part # Climber Pads 145AC For BD12 - BD16 Climbers 145BC For BD14 Climbers
105BC
Two Piece Foot Strap
www.linestar.ca
Part # Climber Straps With Buckle Pads 85N 1” x 24” Single Piece Nylon Leg Strap 86N 1” x 28” Single Piece Nylon Leg Strap 87N 1” x 28” 2 Piece Nylon Foot Strap (Unassembled) 89N 1” x 28” 2 Piece Nylon Foot Strap (Assembled)
Part # 14 14P 14T
Alberta: British Columbia: Manitoba: Ontario:
Part # Curved Pads With Steel Inserts 105A Straight for BD12 & BD16 Styles 105AC Angled for BD12 & BD16 Styles 105B Straight for BD14 Styles 105BC Angled for BD14 Styles
#2
Replacement Gaffs Standard 1-5/8” Gaffss Polished 1-5/8” Gaffs 2-1/2” Tree Gaffs
Gaff Guard Leather with Velcro strap
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
105A
• • • •
1972G
Klein Snap-On Gaff Guard
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
55
linemans boots
personal protection
Meindl 10 Inch Steel Toe Eureka Lineman Sole Hoffman’s are excited to add the 10” Meindl Lineman Boot to our line of top quality footwear. The German made Meindl boot has a very supportive upper that provides excellent leg support and stability. A waterproof bootie helps insure dryness and a removable insole adds cushion to your every step. Hoffman’s has added our Dual Steel Shanks to the boot for all day climbing comfort. A durable Vibram lug sole provides traction and long time wear. Easy to break in, the Meindl Line Boot is ideal for those looking for a comfortable line boot with a waterproof liner. Although waterproof liner failure is rare in the construction of this boot, neither Hoffman’s nor Meindl will warranty the waterproofness of this boot. Order 1/2 size smaller than usual. If a safety toe is needed, please look at our other listings for these models. Available in sized 7-14 • Half sizes available up to size 12 Meindl 10 Inch Steel Toe Eureka Regular Sole For those of you who do not climb much yet still need a safety toe boot, our 10” single shank Steel Toe EH Rated Meindl Lineman Boots fits the bill. The German made Meindl boot has a very supportive upper that provides excellent ankle support and stability. A waterproof bootie helps insure dryness and a removable insole adds cushion to your every step. A durable Vibram style lug sole provides traction and long time wear. Easy to break in, the 10 Inch Meindl Boot is ideal for those looking for a comfortable ground boot with a waterproof liner. This boot will meet the F2413-11 standard for safety toe and EH rating. Although waterproof liner failure is rare in the construction of this boot, neither Hoffman’s nor Meindl will warranty the waterproofness of this boot. Note: The Meindl boot runs large. Order 1/2 size smaller than normal. Available in sized 7-14 • Half sizes available up to size 12 Hoffman EH 10 “ COMPOSITE TOE DRI-LINE EH Sole The 10” and 16” EH Composite Toe Dri-Line are built to keep your feet dry inside when conditions are wet on the outside. A highly advanced Sympatec waterproof membrane keeps water out and adds cusion and comfort to the boot. For climbing, our dual steel shanks are added to provide the extra arch support needed. Other quality features include a 7-7 1/2 brown waterproof leather upper that provides support to your legs. A climber side patch, solid brass hooks and eyelets, supportive heel counter, Vibram lug sole and three rows of durable stitching help prolong the life of the boot. For those looking for a quality waterproof climbing boot, look no further. The Composite Toe Dri-Line meets ASTM F-2413-05 MI/75 C/75 safety standards and is EH approved. Available in sizes 7-14 • Widths D/E/EEE Available *Size 14 is available in D width only
NOT CSA/Ohm rated • EH rated and meets or exceed CSA standards Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Hoffman EH 10 “ STEEL TOE DRI-LINE EH Sole The 10” Steel Toe Dri-Line was built to keep your feet dry inside when conditions are wet on the outside. A highly advanced Sympatec waterproof membrane keeps water out and adds cusion and comfort to the boot. For climbing, our dual steel shanks are added to provide the extra arch support needed. Other quality features include a 7-7 1/2 oil tanned leather upper that provides support to your legs. A climber side patch, solid brass hooks and eyelets, supportive heel counter, Vibram lug sole and three rows of durable stitching help prolong the life of the boot. The 10” Steel Toe Hoffman Dri-Line is both EH and ASTM F-2413-05 MI/75 C/75 approved. For those looking for a quality waterproof climbing boot, look no further. Available in sizes 7-14 • Widths D/E/EEE Available *Size 14 is available in D width only
56 personal protection
linemans boots HOFFMAN CSA CTPOWER COMPOSITE TOE GORETEX CLIMBING BOOTS We are pleased to bring you our 10” EH approved Composite Safety Toe Powerline boot. This is the perfect boot for lineman needing an Electrical Hazard Aprroved Boot and for those who want a lightweight climbing boot. The EH Hoffman Powerline offers many features found on our other line boots. A double midsole combined with our DUAL STEEL SHANKS provide plenty of climbing support. A rebuildable vibram lug sole provides excellent wear and a added climbing heel adds climbing safety. The leather cordura upper provides breathability to help keep you cool and a waterproof membrane will help keep you dry. NOW AVAILABLE IN A STEEL TOE WITH A WIDER TOE BOX FOR ADDED COMFORT!!!!!!! Available in sizes 7-13 (No half sizes available for sizes 12 to 14) NOTE: Boots are available in D width 7-12,13 & EE width 8-12, 13. Hoffman EH Lineman Steel Toe Felt Pac Some places require an EH rated steel toe boot for added safety. Our new EH Steel Toe Felt Pac meets this need. This boot has many of the same features of the Hoffman Lineman Felt Pac including our dual steel shank system that adds the most arch support of any lineman boot available. The waterproof rubber bottom includes a steel toe that meets or exceeds the safety standard requirements of the ASTM. PLEASE KEEP IN MIND WHEN WE CONSTRUCT AN EH APPROVED BOOT, WE CANNOT NAIL THE HEEL OR SOLE ON. IF YOUR NOT REQUIRED TO WEAR AN EH BOOT, WE SUGGEST YOU ORDER THE REGULAR HIGHLINE FELT PAC. Like all of our boots, the EH Steel Toe Felt Pac is rebuildable for years of service-something you’ve come to expect from Hoffman’s. Note: If a EH approved boot is not required at your work, our regular Highline Felt Pac with the nailed on sole does offer a stronger finished product because of the support of the nails. ANSI Steel Toe (Z41 Pt 91,MI-75 C-75). FITTING TIPS: Hoffman felt pacs run true to size. Whole size-order the same. Half size-Order down (i.e.: 9 1/2 would order 9) unless you have a wide foot. Available sizes: 6-15 (no half sizes) • Heights available: 10”, 12”, 14” Widths Available: D and E • Steel and regular toe available Note: E widths available in 8-12, 13 only.
NOT CSA/Ohm rated • EH rated and meets or exceed CSA standards Hoffman CSA Composite Toe Powerline We are pleased to bring you our 10” CSA approved Composite Toe Powerline boot. This is the perfect boot for lineman needing a CSA Aprroved Boot and for those who want a lightweight climbing boot. The CSA Hoffman Powerline offers many features found on our other line boots. A double midsole combined with our DUAL STEEL SHANKS provide plenty of climbing support. A rebuildable Olympia Vibram lug sole provides excellent wear and a climbing heel adds climbing safety. The leather - cordura upper provides breathability to help keep you cool and a waterproof membrane will help keep you dry.
www.linestar.ca
CSA POWER
CSA INS
Hoffman CSA Insulated All Leather Composite Toe Powerline We are pleased to bring you our 10” CSA approved All Leather Composite Toe Powerline boot. This is the perfect boot for lineman needing a CSA Approved Boot for cooler temperatures. The CSA All Leather Hoffman Powerline offers many features found on our other line boots. A double midsole combined with our DUAL STEEL SHANKS provide plenty of climbing support. A rebuildable Olympia Vibram lug sole provides excellent wear and a climbing heel adds climbing safety. The all leather upper combined with 400 grams of thinsulate and a waterproof membrane will help keep you warm and dry. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
57
linemans boots • • • •
Model 8700 High Cut, 10” Linemen’s Boots. Vibram Dielectric Soles and Dual rib steel shank arch supports Sizes available 5 to 12 ( 1/2 sizes included) & 13 Widths available to 3E
CSA/OHM rated Royer 753777 Dielectric Sole Winter Linemans Boots • Model 753777 Winter Linemen?s Boots with Vulcanized rubber Track slip Dielectric Soles • Double Dual rib steel shank , Protective Steel Toe, Padded Ankle Protector • Isofix and Thinsulate lining & removable Wool Liner good to -50 degrees • Padded ankle protector to ease climber wear • Sizes available 5 to 13 (no half sizes available) • It is recommended that you purchase an extra set of #1705 Winter liners
personal protection
Royer 8700 CSA Approved Dielectric Sole Linemans Boots
CSA/OHM rated Royer 408386 Conductive Boot • Vulcanized rubber Chevron slip and oil resistant sole • Protective steel toe • Protective steel plate • Conductive protection • Double conductive calf strap • Padded ankle protector to ease climber wear • Double dual-rib steel shank • 2.0 mm full grain leather • Sealed seams • Leather lining • Conductivity between 0 and 10 000 Ohms • Sizes: 4-12 + ½, 13, 14, 3E WIDTH
CSA/OHM rated Royer 458686 Thermal Conductive Boot Winter conductive boot with removable conductive felt liner offering a protection from 0 to 2 000 Ohms. Soles and footbeds maintaining the same electrical conductivity • • • •
Conductive rubber external sole permitting the discharge of the electrostatic charges Steel toe cap meets CSA? standards Sizes 4 to 12 + 1/2, 13 according to styles, EEE width for men Sizes 6 to 12 + 1/2, D width for ladies
CSA/OHM rated
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
B105FUL.GR Airlok Ultra • Rated for -50ºC • Sizing Men’s 6 - 15 • Composite toe and non-metallic midsole provides full safety protection and increased thermal insulation in cold weather • Omega/EH rated • Winter tire tread inspired tread pattern features wider and deeper dispersion lines designed to pull water up and away from the contact point in the sole and ground for greater slip resistance. • Aggressive tread design to provide superior traction in snow and mud • Reinforced ankle protection and extra ankle room to prevent rubbing • Upper grip on boot allows you to easily put on boots even when wet or muddy • Ergonomically designed upper boot to allow for a better range of movement at the calf • Lightweight and comfortable • Innovative heel-tab for easy removal • Cut off line for customizable boot height • Mineral, Organic and Chemical Resistant
personal protection
58
work gloves Made of the finest quality materials, these gloves provide excellent comfort, dexterity and wear.
365DLX2
365DLX6
365DLX2TL
Deluxe Lineman Glove, 2” Reflective Gauntlet Cuff Deluxe lineman glove, 2” safety cuff, Sizes: S - XL. All styles are sewn with Kevlar® thread for extra seam strength.
Deluxe Lineman Glove, 6” Reflective Gauntlet Cuff Treated with Waterstop™ a fluorochemical water-repellent emulsion for excellent water, oil, and stain-repellent properties.
Endura® Deluxe Winter Lineman Gloves, 6” Reflective Gauntlet Cuff 2” safety cuff, hand is fully C100 Thinsulate® line for a high warmthto-thickness ratio perfect for winter.
361DLXFTL
365DLXFTL
365DLX2KG
365DLX6KG
361DLX6KG
361DLXTKG
www.linestar.ca
Deluxe Lineman Deluxe Lineman Endura® Deluxe Kevlar®- Lined 1 Finger Winter Mitt Thinsulate Lined Winter Gloves Lineman Gloves with One-finger Deluxe lineman mitt, Deluxe lineman glove, 6” gauntlet, Reflective Cuffs 6” gauntlet, hand is fully C100 hand is fully C100 Thinsulate® lined. Made with select heavy weight 3½ Thinsulate® lined. With performance This style is Thinsulate™ lined for oz. cowgrain leather that has been thumb/palm patch, which reinforces a high warmth-to-thickness ratio, treated with a fluoro-chemical watercritical-wear areas with a double making themperfect for winter or any repellent emulsion for excellent water, layer of leather. cold working conditions. oil, and stain-repellent properties.
Endura® Deluxe Kevlar®- Lined Endura® Deluxe Kevlar®- Lined Deluxe Kevlar®- Lined OneOne-finger Lineman Mitts with finger Lineman Mitts with 6” Lineman Gloves with 6” 6” Reflective Gauntlet Cuffs Reflective Gauntlet Cuffs Reflective Gauntlet Cuffs Made with select heavy weight 3½ Made with select heavy weight 3½ Made with select heavyweight 3½ oz. cowgrain leather that has been oz. cowgrain leather that has been oz. cowgrain leather that has been treated Waterstop™: a fluorotreated with a fluoro-chemical watertreated with Waterstop™: a fluorochemical water-repellent emulsion repellent emulsion for excellent water, chemical water-repellent emulsion that provides excellent water, oil, and stain-repellent properties. that provides excellent water, oil, and oil, and stain-repellent properties. stain-repellent properties. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
59
Cut Resistant Gloves
365DLX2TKG
365DLXTKG
Deluxe Kevlar®- Lined Lineman Gloves with Reflective Cuffs
Deluxe Kevlar®- Lined Lineman Gloves with 6” Reflective Gauntlet Cuffs Kevlar® lining that runs from the Special features include our performance fingertips to the end of the cuffs, thumb/palm patch, which reinforces criticalthese gloves also provide impressive wear areas with a double layer of leather. Two ANSI level A4 cut resistance and heavy-duty 3M™ retroreflective silver strips ANSI level 5 puncture protection. that are each flanked by high-viz bands.
365DLX2KG
Endura® winter Deluxe Kevlar®- Lined Lineman Gloves with Reflective Cuffs Made with select heavyweight 3½ oz. cowgrain leather that has been treated with a fluoro-chemical waterrepellent emulsion for excellent water, oil, and stain-repellent properties.
378KGTVB
361DLX6KG
Endura® Kevlar® - Lined Waterstop ™/Oilbloc™ Goat-Grain Arc-Flash Drivers Glove One-finger lineman mitts are made with select heavyweight 3½ oz. cowgrain leather that has been treated with Waterstop™.
365DLX6KG
Endura®winter Deluxe Kevlar®- Lined Lineman Gloves with 6” Reflective Gauntlet Cuffs Made with select heavyweight 3½ oz. cowgrain leather. With Kevlar®lining that runs from the fingertips to the end of the cuffs, also offer impressive ANSI level A4 cut resistance and ANSI level 5 puncture protection.
375KGTVB
378GOBKL
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Endura® WINTER Kevlar® and Endura® Winter Anti-Impact Endura® Kevlar ® - Lined Thinsulate™ - Lined Anti-Impact Kevlar®- Lined Goatskin Driver Waterstop™/Oil bloc™ GoatGoatskin Driver Gloves Gloves with Oilbloc™ Grain Arc-Flash Drivers Glove With smart styling and design, this Crafted with high-performing This Kevlar®-lined goat grain glove drivers-style, goat-grain leather glove materials like premium grade goatoffers ANSI level-A4 cut protection. is fully lined with a blend \of Kevlar® skin, Kevlar®, and Thinsulate™, Elasticized backs provide a snug fit, and composite filament fiber, offering these gloves provide countless adallowing gloves to slip on and off ASTM cut-level 4 protection. vantages in the workplace. easily. Alberta: British Columbia: Manitoba: Ontario:
personal protection
Made of the finest quality materials, these gloves provide excellent comfort, dexterity and wear.
personal protection
60
Cut Resistant Gloves Made of the finest quality materials, these gloves provide excellent comfort, dexterity and wear.
40080
Klein Lineman Gloves 4” leather and Neoprene cuffs with side vents. Soft grain leather construction with reinforced leather palm and finger patches. Double-row padded knuckles for durability. Black spandex back with Klein Lineman logo patch.
20-1-10698
Premium Water Repellent Goatskin Leather gloves with a Cut Resistant Kevlar® Liner Hi-Viz TPU impact protection, padded palm and gauntlet cuff for the ultimate glove in any work environment. Premium grain goatskin leather for comfort and durability. Winter version available 20-9-10698
99-1-9730
Coated Synthetics Ninja® Gloves They are lightweight, comfortable and offer increased dexterity and flexibility. Bi-Polymer coating provides softness & durability . EN388 Cut Level 4. Treated with Actifresh® to eliminate bacteria.
S18TAFG
TenActiv™ Composite Filament Fiber Level-4 Cut-Resistant Knit LINERS High-strength composite filament fiber which boosts cut resistance. Feature lint-free, continuous filament yarn that is stronger than steel on an equal-weight basis. For use in non-cut resistant gloves.
Arc/FR Traffic Safety Clothing HO-015 Arc/FR Hi-Vis | Arc/FR Work Shirt • • • • • • •
INDURA® UltraSoft® - Twill Weave • 88% Cotton / 12% High Tenacity Yarn 7oz weight • Flame resistant International blaze orange colour • Long sleeve Western style fit • Button front closure 2 breast pockets, left side with pencil slot Laydown collar 2” wide yellow 3M™ Scotchlite™ reflective tape heat sealed to the shirt in positions as follows: - 2 vertical stripes on front - X pattern on back - 2” silver bands encircling arms
MEN’S ARC/FR WORK SHIRT MEASUREMENTS*
www.linestar.ca
Shirt Width Shirt Length
S M L XL 2XL 3XL 20.5” 22.5” 24.5” 26.5” 28.5” 30.5” 31” 31.5” 32” 32.5” 33” 33.5”
*To determine what size will fit you best, compare a same style garment that you already own that fits you well, to this chart. Choose your existing garment and lay it flat on the ground. Measure the width from side seam to side seam across the chest to determine the width then compare it and any other measurements you choose to this chart. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
61
arc/fr traffic safety clothing
personal protection
HO-006 Arc/FR Hi-Vis | Arc/FR Long Sleeve T-Shirt • • • • • •
INDURA® UltraSoft® • Compacted Interlock 88% Cotton / 12% High Tenacity Yarn 6.25oz weight • Flame resistant International blaze orange colour • Long sleeve - knitted cuff Generous cut • Rib knit collar 2” wide yellow 3M™ Scotchlite™ reflective tape heat sealed to the shirt in positions as follows: - 2 vertical stripes on front - X pattern on back - 72 cm2 silver tape on side of biceps
MEN’S ARC/FR LONG SLEEVE T-SHIRT MEASUREMENTS* Shirt Width Shirt Length
S M L XL 2XL 3XL 19” 21” 23” 25” 27” 29” 28.5” 29.5” 30.5” 31.5” 32.5” 33.5”
*To determine what size will fit you best, compare a same style garment that you already own that fits you well, to this chart. Choose your existing garment and lay it flat on the ground. Measure the width from side seam to side seam across the chest to determine the width then compare it and any other measurements you choose to this chart.
HO-140 Arc/FR Hi-Vis | Arc/FR Bib Overall • INDURA® UltraSoft® - Twill Weave • • • • • • • • • •
88% Cotton / 12 % High Tenacity Yarn 9oz weight • Flame resistant International blaze orange colour • Bib style 2 breast pockets, left side with pencil slot 1 tool pocket on leg 2 side pockets with slip-through to underclothing 2 large back pockets 2” wide adjustable elastic shoulder straps 2 - way brass zipper front closure • 12” Legs Zippers 2” wide yellow 3M™ Scotchlite™ reflective tape stitched to overall in positions as follows: - 2 vertical stripes on front - X pattern on back - 2” silver bands encircling each leg below the knee
Winter Lined Bib Overalls available Part # HO-340
MEN’S ARC/FR BIB OVERALL MEASUREMENTS* S M L XL 2XL 3XL Overall Width 21” 23” 25” 27” 29” 31” Waist Width 21” 23” 25” 27” 29” 31”
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
*To determine what size will fit you best, compare a same style garment that you already own that fits you well, to this chart. Choose your existing garment and lay it flat on the ground. Measure the width from side seam to side seam across the chest to determine the width then compare it and any other measurements you choose to this chart.
personal proctection
62
arc/fr traffic safety clothing HO-325 Arc/FR Hi-Vis | Arc/FR Bomber Jacket • • • • • • •
INDURA® UltraSoft® - Duck Weave 88% Cotton / 12% High Tenacity Yarn 12oz weight • Flame resistant International blaze orange colour Zepel treated for stain and water resistance Jean jacket styling • Zipper front closure 2 front lower pockets, 1 slash and 1 top entry with flap and snap closure, 4 pockets in all • Mandarin collar with 5 snaps for optional hard hat sized hood • 1.5” reinforced bands on front plackets and on bottom hem • Accepts optional #HO-330 hard hat sized hood • 2” wide yellow 3M™ Scotchlite™ reflective tape stitched to jacket in positions as follows: - 2 vertical stripes on front - X pattern on back - 2” silver bands encircling biceps
Winter Lined Jackets available Part # HO-350-M
MEN’S ARC/FR BOMBER JACKET MEASUREMENTS* Jacket Width Under Arm Length Jacket Length
S 23.5” 19” 25.75”
M L XL 2XL 3XL 24.5” 25.75” 27” 28.25” 29.5” 19” 19.5” 20” 20” 20.5” 26” 26.25” 26.5” 26.75” 27”
*To determine what size will fit you best, compare a same style garment that you already own that fits you well, to this chart. Choose your existing garment and lay it flat on the ground. Measure the width from side seam to side seam across the chest to determine the width then compare it and any other measurements you choose to this chart.
Nasco Arc Resistant FR Rain Gear Flex Arc Attached Hood Jacket
www.linestar.ca
• • • • • • • •
Polyurethane / FR Treated Cotton Zipper front Storm flap with snap front Vented Nomex® mesh back with “D” ring access Tuck-away hood with drawstring closure Patch pockets (2) with Velcro closure Inside left breast cell phone pocket Reflective film (2” silver) across vent, down storm flap, around sweep, upper arms, and around wrist • Take-up tabs with Velcro on wrists • Compliant with Class 3 high visibility back ground & retroflective material standards as listed in ANSI 107-2004
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
63
Nasco arc resistant fr rain gear
• Polyurethane / FR Treated Cotton • Elastic suspenders 36” long and 1 ¼” wide. • Non-conductive snap closures that fastens suspenders onto garment • Take up tabs • Reflective film 1 ½” Silver, 1 strip 2” from hem, and 1 strip 14” from hem • Compliant with Class E high visibility background & retroflective material standards as listed in ANSI 107-2004
48” Coat
personal protection
Flex Arc Bib Trousers
SERIES 1000 ARCLITE SUITS
These suits are made of the same material and offer the same protection as the 1500 series but without the Hi-Visibilty rating. • Made of 8 oz/yd2 Nomex® E89/Synthetic Leather PU/PVC • Electric Arc Rated per ASTM F1891 & NFPA 70E • Available in Yellow or International Orange
Part # 1103J 1101T 1101P 1103C
Series 1500 Hi-Vis ArcLite Suits Waist Length Jacket Bib Trousers Elastic Waist Pants 48” Length Coat
All jackets and coats have a 3 piece hood-in-collar, two pockets with Velcro® closure, non-conductive zipper with dual flies & snaps, Nomex® ventilation system, fall protection access, Velcro® tab type wrist adjusters and 3M 2” reflective trim around chest, over the shoulders, around the biceps and around the hood. Bib trousers have a quick release suspender system, fly front with snap, Velcro tab type cuff adjusters and 3m 2” refelctive trim around the calves and knees.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Pants come with an elastic waist, fly front with snap, Velcro tab type cuff adjusters and 3M 2” reflective trim around the calves and knees.
Nasco ARC RESISTANT FR RAIN GEAR
personal protection
64
Omega™ is the first waterproof, breathable outerwear product that combines high visibility worker conspicuity with protection from the thermal hazards associated with an electric arc flash and hydrocarbon flash fires. Omega is designed for today’s rugged work environment. Features & Benefits • Removable Winter and Arctic Liners Available – transforms raingear into a 4-season garment • ANSI 107 Class 3 Compliant – maximizes worker visibility • Fall Protection Access – allows for easy use of fall protection harness • Stain & Soil Release – allows garment to remain clean and highly visable • Chemical Splash Resistance - minimizes burn injury from splash exposure of certain chemicals • Electric Arc Resistance – minimizes burn injury from an electric arc flash • Flash Fire Resistance – minimizes burn inury from a hydrocarbon flash fire • Water & Wind Proof – protects workers from the elements • Breathable & Lightweight - reduces worker heat stress • Designed With Premier Features – maximizes worker functionality • Multi-year Life Cycle – reduces overall program cost
www.linestar.ca
Recommended Applications • Gas & Electric Utility Transmission & Distribution • Telecommunication & CATV Workers • Storm Restoration • Electrical Maintenance • Meter Service • Electrical Switching
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
65
Rubber Insulating Gloves Class 0 and 00 gloves are available in 11” and 14” lengths and in full and half sizes 8 through 12. Extremely flexible, these gloves provide the dexterity needed when working with small parts. Meets ASTM D120 standards.
Maximum Part # Classs Length Color Use Voltage E0011R 00 11” Red 500 VAC E011Y 0 11” Yellow 1,000 VAC E014Y 0 14” Yellow 1,000 VAC Class 0 gloves are also available in Red, Black, or 2-Color. Class 00 gloves are also available in Blue, or 2-Color Type II Rubber
Straight Cuff
Bell Cuff
Contour Cuff
rubber goods
Low Voltage Rubber Gloves
Mitten
High Voltage Rubber Gloves
Class 1 through 4 gloves are available in 14”, 16” and 18” lengths. The Bell Cuff allows for heavier winter clothes and greater air flow in warmer weather. The Contour Cuff is angled to prevent bunching or binding at the elbow when the arm is bent. All meet ASTM D120.
Classs Length Cuff Size Color Max Use Voltage 1 14”, 16” or 18” BC, CC B, YB or RB 7,500 VAC 2 14”, 16” or 18” BC, CC B, YB or RB 17,000 VAC 3 14”, 16” or 18” BC, CC B, YB or RB 26,500 VAC 4 14”, 16” or 18” BC, CC B, YB or RB 36,000 VAC
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
COLOR: “B”=Black, “YB”=Yellow Inside/Black Outside, “RB”=Red Inside/Black Outside CUFF STYLE: Straight Cuff is Standard. “BC”=Bell Cuff, “CC”=Contour Cuff 18” Only SIZING: Straight, Bell & Contour Full & Half Sizes 8 - 12. Class 3 & 4 Full & Half 9 - 12. 1 FINGER MITTENS: Use “EM” Prefix. Full Sizes Only 9 - 11.
To Order: Start with an “E” prefix then Class, Length, Cuff Style, Color and Hand Size. Example: A Pair of Class 2, 16”, Bell Cuff, Yellow & Black Gloves, Would Be Part # E216BCYB
rubber goods
66
Rubber Gloves & Accessories the power gripz - Ultimate Rubber Glove Protection Linemen know. Ultimately, keeping the power on is all in their hands. But ordinary gloves just weren’t designed for the real-world, in-the-air work they do every day. Ordinary leather protector gloves get slick from wear and the oily residues on line apparatus; maddeningly slippery in foul weather. Linemen need and deserve a better grip on the tools, small parts and apparatus they use, to work more efficiently, keep drop zones safer and get the job done, no matter what conditions the linemen face. The only gloves designed by linemen, for linemen. The only gloves tested and proven to be superior for grip, arc protection, heat penetration and all-weather dexterity. The Power Gripz have been endorsed by Hugh Hoagland, founder and senior consultant to ArcWear. • • • •
The highest leather protector glove ATPV rating in the industry: 40cal/CM2. Blocks fully 94% of heat penetration in EBT testing. Meets and/or exceeds all ASTM F-696 Standards for leather protector glove design. Proprietary grip pads (patent pending) provide unparalleled grip without compromising hand dexterity, and safety in all weather conditions. Specialized cowhide provides arc and heat protection plus superior abrasion resistance while providing all day comfort and dexterity.
Proprietary Scientifically Blended Silicone ribbed fingertip grip pads provide unmatched tactile control of small parts.
100% compliant, meets & exceeds all ASTM F-696 leather protector glove standards.
Patent pending grip material extends across palms for secure grip on tool handles and gear.
Velcro adjustment strap provides easy on and off.
Kevlar stitching with frame retardant quality on all seams for extreme durability, maximum strength and thread count.
Reverse rolled cowhide cuff improves safety in an arc fault situation
Non-conducting ring replaces clumsy buckle adjustment while limiting arc flash burns from metal buckles.
www.linestar.ca
Designed by Linemen. Proven by Science. It’s time to change your gloves, FOREVER.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
67
rubber gloves & accessories Leather protectors provide mechanical protection against cuts, snags or any damage that may compromise the insulating integrity of the rubber gloves.
6CH5S
ILPG-5S
Part # 6CH5S ILPG-5S-3 ILPG-5S-5
Description Low-Voltage Protector Class 2 Protector Class 3 Protector
Material Goatskin Cowhide Cowhide
rubber goods
Leather Protectors for Rubber GloveS
Add “1F” suffix for 1-Finger Mitten Protectors Add “BC” suffix for Bell Cuff Protectors Many other styles and materials are available. Maintain a distance of 1” between the cuff of the protector and the cuff of the rubber glove for every 10,000 volts rating. Examples: For a 14” class 2 rubber glove, order a 12” protector; for a 18” class 4 rubber glove, order a 14” protector.
Cotton Stretch Dugs Glove Liners
G-99 Glove Inflator
Portable and easy to use, this unit allows for field inspection of rubber gloves.
Cotton Glove Liners
G-100 Glove Inflator
S13FRT
Same as the G99 but with an adapter for low voltage gloves.
Flame Resistant Rhovyl AntiStatic String-Knit Gloves
455400 - Straight Side Glove Bag
Heavy duty canvas. Nickel plated steel snap fasteners. Double stitch rolled edges. Grommet hole. Back snap for hanging. Straight sided. For 14” gloves.
455300 - Straight Side Glove Bag For 12” gloves.
10-4 Glove Powder
455401 - Straight Side Glove Bag
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
For 18” gloves.
Case of 12, 6 oz. Bottles
68
rubber goods
rubber insulating sleeves Extra-Curved
Straight
Dipped Rubber Sleeves
Dipped sleeves are manufactured in the same way as rubber insulating gloves. Porcelain forms are dipped into liquefied rubber, dried, trimmed, marked and cured. These are the most comfortable and flexible sleeves available. Meets ASTM D1051. Class Size Color Max Use Voltage 0 S, R, L or X YLW 1,000 VAC 1 S, R, L or X B, Y, Y/B or R/B 7,500 VAC 2 S, R, L or XL B, Y, Y/B or R/B 17,000 VAC 3 S, R, L or X B, Y, Y/B or R/B 26,500 VAC 4 S, R, L or X B, Y, Y/B or R/B 36,000 VAC Colors: B=Black; Y/B=Yellow/Black; R/B=Red/Black Add “ST” suffix for Straight Cuff or “EC” suffix for Extra-Curved
To Order: Start with a “D” prefix, then Class, Size, and Color. Example: A Pair of Class 3, Large, Red & Black Sleeves, Would Be Part # D3LRB
Rubber Sleeves Accessories B2 Sleeve Buttons 2-Piece Screw Type, Set of 4t
H-1 Sleeve Harness S-1 Sleeve Straps 4585 - Sleeve Roll-up
A nylon reinforced vinyl sleeve rollup with hook and loop button fastening. Sized to hold X-long sleeves flat without folding. Dee ring to hang up. Measures 32 1/2” x 21”.
www.linestar.ca
5231 - Sleeve Bag
A 30” long sleeve bag that can fit up to 29” sleeves. Features an added glove bag pocket and a hook and loop hanger inside the bag to keep sleeves from falling to the bottom. Also features a liner/glove dust pouch. Measures 30”L x 3”W.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
528 - Sleeve Bag
A sleeve bag that is made of heavy duty canvas. Holds 29” sleeves. Tapered to support sleeves when hung on belt. Quick releases snap on back and a snap closure top. • • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
69
rubber insulating blankets
Solid Style Blankets Max Use Part # Class Size Color Type Voltage 12 2 22” x 22” Black I 17,000 VAC 13 2 22” x 22” Orange II 17,000 VAC 400E 2 27” x 36” Black I 17,000 VAC 300E 2 36” x 36” Black I 17,000 VAC 901E 4 36” x 36” Black II 36,000 VAC 900E 4 36” x 36” Orange II 36,000 VAC
rubber goods
Rubber blankets come in a variety of classes, styles and sizes. Made of either Type I natural rubber or Type II synthetic rubber, these blankets can be used anywhere that standard cover-up devices cannot. All blankets meet current ASTM D1048 specifications
Slotted Style Blankets Max Use Part # Class Size Color Type Voltage 14 2 22” x 22” Black I 17,000 VAC 1100 2 22” x 36” Black I 17,000 VAC 15 4 22” x 22” Orange II 36,000 VAC 15-1 4 22” x 22” Black II 36,000 VAC 1300 4 36” x 36” Orange II 36,000 VAC 1301 4 36” x 36” Black II 36,000 VAC
Low Voltage Blankets
“Zip” Style Shown
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
Max Use Voltage 1,000 VAC 1,000 VAC 1,000 VAC 1,000 VAC 1,000 VAC 1,000 VAC 1,000 VAC 1,000 VAC
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
Part # Class Size Color Type 1212YLV 0 12” x 12” Zip II 1212YLVNV 0 12” x 12” Plain II 1818YLV 0 18” x 18” Zip II 1818YLVNV 0 18” x 18” Plain II 1836YLV 0 18” x 36” Zip II 1836YLVNV 0 18” x 36” Plain II 3636YLV 0 36” x 36” Zip II 3636YLVNV 0 36” x 36” Plain II
rubber goods
70
rubber blanket accessories
TY-14
14” Blanket Strap
20 Wooden Blanket Strap
TY-30
HS21 Nylon Blanket Clamp with shotgun rings
21 Nylon Blanket Clamp
30” Blanket Strap
C4032999
Blanket Canister with Handle 10” x 37” holds 6 each 36” blankets
C4032998
Blanket Canister with No Handle 7” x 37” holds 4 each 36” blankets
MB-6
Magnetic Blanket Button
kLonDIkE CLAMP
www.linestar.ca
RBG-D72 American Polywater Rubber Goods Cleaner - 72-count Saturated Wipe Dispenser
Polywater Rubber Goods Cleaner is a formulated water-based cleaner for removing grease, dirt, carbon, creosote, and other grimes from insulating blankets, lineman’s gloves, rubber sleeves, jumper cables, hot jumpers, and linehose. Rubber Goods Cleaner is safe for use on all natural and synthetic rubbers. Rubber Goods Cleaner contains no hazardous ingredients and is pH neutral, making it safe for use on skin. Rubber Goods Cleaner is also completely biodegradable and safe for the environment.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
The Klondike Clamp tool series quickly and safely secures blankets in position on poles without damaging the blankets. The Klondike Clamp tool series eliminates the need for tie wrap, bungee cords, Velcro®, tape or any other means that are both time consuming to install and potentially damaging to the blanket. The Klondike Clamp tool series can also be used in a myriad of pad mount equipment situations where it is difficult to secure the blanket by conventional means.
Molded from a tough weather resistant polymer and assembled completely with stainless steel hardware the Klondike Clamp tool series will provide a lineman with many years of maintenance free usage. 403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
71
insulating line hose & covers
Connector End Line Hose
Straight Line Hose
Part # Class Size Style OR125-6 2 1.25” x 6’ Straight OR125-6C 2 1.25” x 6’ Connector OR150-6 3 1.5” x 6’ Straight OR150-6C 3 1.5” x 6’ Connector
Max Use Voltage 17,000 VAC 17,000 VAC 26,500 VAC 26,500 VAC
Part # Class Size Style OR125-45 2 1.25” x 4.5’ Straight OR125-45C 2 1.25” x 4.5’ Connector OR150-45 3 1.5” x 4.5’ Straight OR150-45C 3 1.5” x 4.5’ Connector
Class 4 Extended Lip Line Hose Part # Class Size Style SU150-45 4 1.5” x 4.5’ Straight SU150-45C 4 1.5” x 4.5’ Connector SU150-6 4 1.5” x 6’ Straight SU150-6C 4 1.5” x 6’ Connector
Max Use Voltage 36,000 VAC 36,000 VAC 36,000 VAC 36,000 VAC
cover up
The self-locking lip prevents the line hose from coming off the conductor after the installation is complete yet is easy for a lineman to assemble and take apart. Made of Type II synthetic rubber, this line hose stays flexible even in cold weather and is not damaged by ozone or ultraviolet rays. Meets ASTM D1050.
Max Use Voltage 17,000 VAC 17,000 VAC 26,500 VAC 26,500 VAC
45150 Line Hose Bag 8” x 48”
45151 Line Hose Bag 8” x 60”
Insulator Hoods
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Cutout Covers
Part # Class Overall Dimensions CC24 2 24” x 15” x 3.5” CC30 4 30” x 20” x 7”
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Line Hose Insulator Part # Class Size Class SU150-45 2 1” 55-1/2/3 SU150-45C 2 1” 55-4 SU150-6 3 1.25”, 1.5” 55-5
72
cover up equipment
cover up
25 kV Conductor and Insulator Covers These 5’ interlocking covers provide extra protection when gloving or sticking. Available with a Grip-All adapter for hot stick application, without adapter for rubber glove application or with a 4’ Epoxiglas® handle.
25 kV insulator covers are 21” long and 8-1/2” wide. Available with or without Grip-All adapter.
C406-0181GA
C406-0009
Part # C406-0181 P406-0184 C406-0181GA C406-0182 P406-0185 C406-0182L P406-0186 C406-0009 C406-0164
Description Conductor Cover with 4’ Epoxiglas Handle Conductor Cover without Handle or Adapter Conductor Cover with Grip-All Adapter Insulator Cover 6” Tall with Grip-All Adapter Insulator Cover 6” Tall without Grip-All Adapter Insulator Cover 9” Tall with Grip-All Adapter Insulator Cover 9” Tall without Grip-All Adapter Cutout Cover Deadend Cover
C406-164
36.6 kV Conductor and Insulator Covers
36.6 kV insulator covers fit 6-1/2” to 9” diameter pin or post insulators and come with Grip-All adapters.
These 36.6 kV conductor covers are 5’ in length and include the Grip-All adapter. Indented ribs along the cover’s top edge provide an air gap between the conductor and the cover.
Part # C406-0514GA C406-0557 C406-0557L C406-0537
Description Conductor Cover with Grip-All Adapter Insulator Cover 12” Tall with Grip-All Adapter Insulator Cover 16.5” Tall with Grip-All Adapter Deadend Cover with Grip-All Ad
www.linestar.ca
C406-0537 To meet the Class 4 rating, the deadend cover must be used in conjunction with a rubber insulating blanket covering the coupler to the line cover. Failure to use a blanket to cover the coupler may result in electrical shock, severe injury or death by electrocution.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
73
cover up equipment 36.6 kV & 46 kV Conductor Covers
Part # C406-0082 C406-0082-6 C406-0082GA
Description 4’ Epoxiglas Handle 6’ Epoxiglas Handle Grip-All Adapter
cover up
Spiral conductor covers are 7” in diameter and 53” in length and are available with a Grip-All adapter, or a 4 foot or 6 foot Epoxiglas handle. 15/36.6 kV covers are formed to fit over most 15 kV insulators. Double crossarm units will fit over two 15 kV pin-type insulators. All styles are interlocking.
46 kV Phase-to-Phase Covers
15/36.6 kV Phase-to-Phase Covers for Single Crossarms Part # C406-0083 C406-0083-6 C406-083GA
Description 4’ Epoxiglas Handle 6’ Epoxiglas Handle Grip-All Adapter
15/36.6 kV Phase-to-Phase Covers for Double Crossarms Part # C406-0084 C406-0084-6 C406-084GA
Description 4’ Epoxiglas Handle 6’ Epoxiglas Handle Grip-All Adapter
M4933 36.6 kV Crossarm Cover
This cover helps prevent tie wires from contacting the crossarm when tying and untying insulators. Designed for single or double-arm construction with slots for double-arming bolts.
M4931 46 kV Conductor Cover
At 5’ in length, these covers come with a Grip-All adapter and can accommodate conductors up to 2” in diameter.
C406-0046 46 kV Insulator Cover
Fits over insulators up to 10-1/2” in diameter and locks with a conductor cover on each end. Adjustable in length form 22” to 34”.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
cover up
74
cover up equipment
C406-0504 Crossarm Cover This rigid cover up fits onto wood or steel crossarm sizes up to 3-3/4” x 4-3/4”. It telescopes form 13.1” to 20.9” and is rated at 26.4kV phase-to-phase.
Pole Covers The pole covers are ribbed to reduce contact with the pole in order to minimize creosote contamination. Buttons on the 4’ and 6’ lengths allow the covers to be joined together when longer lengths are needed.
6” Diameter Pole Covers Part # C406-0550 C406-0551
Description 48” Overall Length 72” Overall Length
9” Diameter Pole Guards Part # M4937-1 M4937-2 M4937-3 M4937-4
Description 12” Overall Length 24” Overall Length 48” Overall Length 72” Overall Length
12” Diameter Pole Guards Part #
Description 24” Overall Length 48” Overall Length 72” Overall Length
C406-0029 C406-0030 C406-0000
C406-0547 Rope Lock
www.linestar.ca
Helps keep pole covers in place especially on smooth surfaces. Can be used on all sizes of pole guards.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
75
cover up equipment 15 kV & 25 kV Polyethylene Line Guards
Description 5’ Line Guard, 15 6’ Line Guard, 15 5’ Line Guard, 25 6’ Line Guard, 25
cover up
Part # 6050 6060 6055 6065
kV kV kV kV
Made of lightweight polyethylene, these guards are available in 5’ and 6’ lengths. Snap together feature with male & female connecting ends.
15/25 kV Conductor and Insulator Covers These 4’-6” guards are equipped with an adjustable eye for installation with any shotgun. Male and female ends allow the guards to interlock with each other.
Part # 12936 12528 12527
Description 4’-6” Line Guard with Shotgun Eye Insulator Hood for Single Pins Insulator Hoods for Double Pins
35, 46 & 69 kV Conductor and Insulator Covers Insulator hoods for either single or double pins. Part # 9770 is adjustable to 3 lengths, 27”, 32” and 37”.
These line guards come with either a shotgun eye or an installing stick handle. With interlocking male & female ends, they can also be nested to save on storage space.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Part # 6010 6011 6012 6013 12000 12001
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
Description 35 kV Line Guard 35 kV Line Guard 46 kV Line Guard 46 kV Line Guard 69 kV Line Guard 69 kV Line Guard
[email protected] [email protected] [email protected] [email protected]
with Shotgun Eye with 4’ Installing Stick w/ Shotgun Eye 4’ Installing Stick w/ Shotgun Eye w/ 6’ Installing Stick
100%
Canadian Owned
www.linestar.ca
Part # Description 9144 22” Insulator Hood for Single Pins 9770 Adjustable Insulator Hood for Double Pins Insulator Hood Voltage Ratings: 35 kV when used with 6010 or 6011 guards 46 kV when used with 6012 or 6013 guards 69 kV when used with 12000 or 12001 guards
cover up
76
COVER-UP EQUIPMENT Arc Suppression Blanket
These blankets are designed and tested to protect a worker from blast energy, heat and flash flame caused by faults in high voltage cable and gear, in compliance to OSHA requirements for manhole protection (29 CFR Part 1910.269(t)(7). The nature of an electric plasma arc is unpredictable therefore reference to your own work methods and practices is important. The blanket is not intended as an insulator against electric shock. It is designed to protect against plasma arc explosions. Note this blanket can be washed at temperatures below 140-degrees F. NO BLEACH. ARC Suppression Blanket, Heavy Duty
SKU SIZE WEIGHT TE-36-60 TE-48-56 TE-48-96 TE-56-96 TE-72-96
3 FT X 5 FT 4 FT X 5 FT 4 FT X 8 FT 5 FT X 8 FT 6 FT X 8 FT
7 7 8 9 9
lbs. lbs. lbs. lbs. lbs.
Arc Suppression 3 Blanket Set (5’ x 8’ each) Aramid/Nomex Blended Outside Layers with 2 inner Layers of Blastic Kevlar TE-SET5696
5 FT X 8 FT (3)
SKU SIZE
WEIGHT
TE-W4856 TE-W4896 TE-W5696 TE-W7296
7 7 7 7
48” 48” 56” 72”
X X X X
56” 96” 96” 96”
lbs. lbs. lbs. lbs.
Arc Suppression Blanket Strap
27 lbs.
SKU TYPE SIZE
WEIGHT
TE-S-6HN TE-S-6K TE-S-6LN
5 oz. 6 oz. 4 oz.
Heavy Nylon 1” W X 72” L Kevlar 1” W X 72” L Nylon 1” W X 72” L
Arc-Suppression Blankets
When draped or loosely wrapped over a defective cable or splice, this are suppression blanket provides protection against electrical arcs and flashes. With Velcro® straps to help keep it in position, this arc-suppression blanket has been tested successfully at 42,000 amps fault current.
Part #
Size
Weight
C406-0452 C406-0453
4’ x 5’ 4’ x 8’
4 lbs. 6-1/2 lbs.
THIS BLANKET IS NOT CLASSIFIED AS “ELECTRICALLY INSULATED”
Instant Insulation
Instand insulation may be installed as permanent cover to protect against outages caused weather, trees and animals. Instant insulation resists ozone and ultraviolent deterioration while remaining flexible even at sub-zero conditions.
www.linestar.ca
SKU Name 1127 1128 1129 1130 1131 1132
INSTANT INSTANT INSTANT INSTANT INSTANT INSTANT
INSULATION INSULATION INSULATION INSULATION INSULATION INSULATION
Description 12’ 12’ 12’ 12’ 12’ 12’
Alberta: British Columbia: Manitoba: Ontario:
/ / / / / /
3.6m 3.6m 3.6m 3.6m 3.6m 3.6m
phone: phone: phone: phone:
long long long long long long
Dimensions Dimensions Dimensions Dimensions Dimensions Dimensions
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
(in): (in): (in): (in): (in): (in):
.75 I.D., Grey .75 I.D., Orange 1.00 I.D., Grey 1.00 I.D., Orange 1.25 I.D., Grey 1.25 I.D., Orange
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
77
traffic & work zone safety
traffic control
WATCHMAN™ Work Area Voltage Detector The Watchman Work Area Voltage Detector, model WM-01, utilizes WAVi Work Area Voltage Indication technology to detect strong electric fields surrounding high voltage conductors and power distribution equipment.Typically placed in the vicinity of power lines or high voltage equipment, the Watchman Detector provides an extra level of safety for trained personnel working on or near high voltage systems. • The Watchman Detector can be activated to visually alert to the presence of an electrical field and can also alert crews that they no longer have active power in the area. • Spinning LED lights indicate an electric field and a nearby energized conductor. • Power button serves dual function, press once for on/off function, hold down for self-test to verify battery power and proper functioning of Detector. • Once turned on, the Watchman Detector provides a “heartbeat” pattern to indicate it is actively checking for the presence of high voltage electric fields. • Powerful neodymium magnets allow the detector to be mounted to accessory brackets or any magnetic surface.
28TC-RC Traffic Cone
With 6” top & 4” bottom reflective collars. Stands 28” and weighs 10 lbs. with cleated bottoms to grip the road. Stenciling is available.
6850 Retractable Cone Bars - Yellow/Black
These barricade bars adjust from 6’ to 10’ and fit over almost any traffic cone. Made of commercial grade ABS materials with engineer grade reflective sheeting. Weighs only 1.35 lbs.
TECMB Cone Mounted Barrier
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
A highly visible, retractable belt extends to 15 feet that can be mounted to almost any traffic cone, wall or work vehicle. The end clip can attach to other units or wrap around a post and clip into itself. It has a locking button to prevent unwanted spooling due to wind. Works best with a cone weighing 10 lbs. or more. Available in Red/White or Black/Yellow.
78 work zone safety
traffic & work zone lighting 7901 GoLight Remote Control LIght
This powerful 400,000 candle power light comes with a programmable wireless remote, suction cup & magnetic mounting shoe and 15’ cord with 12VDC lighter plug. 370o rotation & 135o tilt.
7951 Same as the 7901 but in Black 2067 GoLight Dual Remote Control Light
Similar in size and power to the 7901 Remote Light, this unit offers a dash mounted remote as well as a wireless remote control. Complete with hardware for permanent mounting.
2049 Same as the 2067 but in Black 45601 HID Litebox Flashlight
The HID Litebox has the intensity and peripheral illumination to light an entire scene. 2 each 5mm white LEDs placed in the front of the housing provides low-light maneuvering. The HID lamp can run up to 1-3/4 hours on a single charge and the LEDs up to 100. • 35 Watt High Intesity Xenon Bulb: 1,000,000 candlepower
45116 Litebox Flashlight
A powerful light with 90o swivel head that comes with a high-intensity halogen bi-pin 8 watt spot bulb.Other bulbs are available. Complete kit includes shoulder strap, A/C and D/C chargers and mounting rack. • 8 Watt Spot: 80,000 candlepower, 9 hours runtime
45851 LED Litebox Flashlight
www.linestar.ca
3 powerful LED’s and deep dish parabolic reflectors produce a large spot pattern.The LED’s are impervious to shock and have a 50,000 hour life. It has both Hi and Low power settings. The kit includes shoulder strap, A/C and D/C chargers and mounting rack. • Hi Setting: 55,000 candlepower, 7 hours runtime • Low Setting: 32,000 candlepower, 15 hours runtime
22051 12V DC
Charger Cord for All Liteboxes
Alberta: British Columbia: Manitoba: Ontario:
22311 120V AC Charger Cord for Litebox
45937 Battery for Litebox
22665 120V AC Charger Cord for HID Litebox
45630 Battery for HID Litebox
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
79
traffic & work zone lighting With 3 settings, low, high & strobe, this light is powered by 4 C batteries. The cushioned pistol-grip handle has a trigger style On/Off switch. The housing is made of a high-impact polycarbonate and features an integrated stand for hands-free lighting. • Hi Setting: 115,000 candlepower, 8.5 hours runtime • Low/Strobe Setting: 10,000 candlepower, 120 hours runtime
work zone safety
44900 Rechargeable WayPoint Flashlight
“PoLE BUG” LED STRoBE LIGHT & 2-FLAG HoLDER Using effective, long lasting LED technology - LED is rated for 100,000 hours of heavy duty operation - this system provides the ultimate in pole mount transportation safety. The single bright RED LED (also available in Amber), with a 5-7 mile visibility range, includes four flash patterns: Comet, Single, Steady Burn and Flare Flicker. Light module is encapsulated for vibration and moisture resistance with dual front/angled reflectors. System is powered by three alkaline “C” batteries, providing 100+ hours of continuous operation. Easy to attach and deploy, using heavy duty strap that attaches to all type of poles and sizes. Additional features include powder coated metal components and dual flag holders. Includes batteries and two red flags.
05-828 LiteBox Holder Accepts all Liteboxes
work zone safety apparel
Hard Hats
Made of a tough polyethylene shell, these hard hats come in 4-point or 6-point suspension models. Each hat has slotted sides to accomodate accessories such as face shields or ear muffs. Both styles have a ratcheting head band to ensure proper fit. ANSI rated Type 1, Class E.
FULL BRIM 4-Point Models
Part # Color 475393 White 802975 Blue 475391 Green FR Chin Straps for Full Brim Hard Hats Part # 10102191
• Made of an absorbent air cushioned layer lined with 10% fleece cotton • Velcro fastening system is designed to fit all major brands of headgear Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
620-3200V FR Hard Hat Sweat Bands
80 work zone safety
work zone safety apparel SEO™ 5 Headlamp
Power and versatility in one package! The SEO 5 shines bright with 180 lumens on high, a red LED for preserving night vision, and a high end power white LED with flash function and a swiveling head that ensures you’ll have light where you want it, when you want it. The Advanced Focus System™ allows for a close up spot or a wider beam, making the SEO 5 a flexible, lightweight, and technology centered headlamp for any sport, hobby or job.
Eos Headlamp
The combination of a one-watt Maxbright LED and Princeton Tec\’s proprietary optics offers unprecedented brightness and beam smoothness in an ultralight, 3-AAA platform. The Eos is optimal for both localized needs and spotting at a distance. We recognize that different amounts of light are needed for different conditions and situations? that’s why we equipped the Eos with three brightness levels and a blinking emergency/signaling mode. The Eos is ready for adventure with its impact-resistant design.
TIKKA® +
Compact headlamp for outdoor activities, with CONSTANT LIGHTING technology for guaranteed constant brightness over time. 160 lumens The TIKKA + headlamp offers 160 lumen brightness in Boost mode. It is ideal for outdoor activities that require rapid movement. Featuring CONSTANT LIGHTING technology to ensure constant brightness over time, and a mixed beam (wide, focused or red for discretion).
Uvex Hypershock™ Safety Eyewear
www.linestar.ca
Uvex Hypershock eyewear delivers the ultimate combination of high-performance protection and aggressive sport inspired styling. The full frame design offers high impact protection, with streamlined padded temples and a molded nosepiece for a secure, comfortable fit. Offered in a wide variety of lens tints
Part # Description S2940XP Clear S2941XP Grey/Smoke S2942XP Amber S2945 Blue Mirror S2949 Polarized Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
81
CR Collapsible Cable Reel
301-1 Pay-Out Reel
This all purpose, portable payout reel can be set horizontally or vertically. A tension brake prevents the reel from coasting eliminating backlash or unraveling of the wire. The width adjusts from 8” to 12” and the inside diameter adjusts from 15” to 30”.
Commonly referred to as a “Butterfly Reel”, this reel is used for winding wire into neat coils. It then collapses so that the coiled wire can be easily removed. It’s designed to attach to a 2-7/16” winch shaft and weighs 70 lbs.
Strand & Wire Dispenser
The “Reel Thing”
6150 6-1/2”D x 30”W
ARBOR Hole Part # Size Cap. lbs. RT-20 2” - 4” 3,000 RT-40 3” - 6” 4,500 RT-60 2-5/8” - 6” 12,000
Easy to use wire dispenser. Lift the pivoting arm, drop in the coil, lower the arm, cut the bands and feed the wire. Stores full and partially used coils.
truck accessories
reel lifts, payout & take up reels
A dependable, easy to use cable reel lifter for use in the warehouse or field.
61501 8”D x 30”W
GWD 1000 Guy Wire Dispenser
Guy Wire Dispenser is designed to provide safe, easy, completely controlled handling and paying-out of strand coils up to 500 ft. in length, including EHS strand. It also can be used with wire, wire rope, cable, conductor, etc. Eliminate weight lifting, handling struggle, and the hazards of “runaway” coil ends.
5276 Guy Wire Dispenser
5478 Triplex Dispenser
Coils are simply rolled into then stand and clamped into place with 4 adjustable arms for easy unwinding and rewinding. Holds coils with diameters up to 31” and widths of 4-3/4”.
Made of zinc coated steel, it has 8 adjustable arms to quickly load, unwind and rewind coils of various sizes. Accepts coils up to 32” outside diameter with a maximum width of 10-1/4”.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
5074 Mounting Base Plate for both models 5275 & 54
truck accessories
82
ground protection mats These mats are designed to prevent heavy equipment from damaging lawns or landscaped areas and from getting stuck in mud or soft, wet terrain. They are less expensive than fiberglass and more costs effective than plywood.
Mobile Matts
Made from “virgin” ultra-high molecular-weight polyethylene, these are the lightest weight mats on the market yet they are incredibly strong. The “M” style pattern provides great traction for even the most aggressive vehicles. The 8 molded handles on the long sides provide easy handling and maneuverability.
AlturnaMATs
www.linestar.ca
These rugged mats are made of 1/2” polyethylene and are virtually indestructable. With a bold cleat design, these mats can support 60 ton loads and have been tested in extreme cold and heat. They can be locked together to form a continous roadway or large work area. Order links separately.
Part # MM-2448 MM-2472 MM-2496 MM-4896
Size 2’ x 4’ 2’ x 6’ 2’ x 8’ 4’ x 8’
Part # AM24 AM26 AM28 AM48
Size 2’ x 4’ 2’ x 6’ 2’ x 8’ 4’ x 8’
Weight 19 lbs. 28 lbs. 37.5 lbs. 75 lbs.
Weight 21.5 lbs. 32.35 lbs. 43 lbs. 86 lbs.
RTL-S Single Link To connect 2 mats end to end RTL-D Double Link To connect 4 mats at the corners Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
83
These mats are designed to prevent heavy equipment from damaging lawns or landscaped areas and from getting stuck in mud or soft, wet terrain. They are less expensive than fiberglass and more costs effective than plywood.
Mat-Pak All-In-One Ground Protection Solution
This complete package is the handy way to transport and store your AlturnaMats. Package Contains: 12 - 4’x 8’ or 3’x 8’ Ground Protection Mats 1 - AMRK Turn-A-Rack Storage and Transportation Rack with four (4) way fork lift entry 20 - RTL-SG Turn-A-Links 2 - AMHH Handi-Hooks 2 - Custom Nylon Ratchet Straps
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
truck accessories
ground protection mats
truck accessories
84
outrigger pads Medium & Heavy Duty Pads
Medium Duty Pads Part # Size D1818 18” x 18” x 1” D2224 22” x 24” x 1” D2424 24” x 24” x 1” D3030 30” x 30” x 1”
These pads feature a safety textured finish and bright orange rope handles. The solid, single material will bend but not break.
Weight 11 lbs. 17 lbs. 19 lbs. 30 lbs.
heavy Duty Pads Part # Size D2424-2 24” x 24” x 2” D3030-2 30” x 30” x 2” D3636-2 36” x 36” x 2” D4848-2 48” x 48” x 2” DR30-2(Round) 30” x 2” DR36-2(Round) 36” x 2” DR48-2(Round) 48” x 2”
Medium Duty capacities Part # Vertical 45º Angle PAD-24241 60,000 lbs. 35,000 lbs. PAD-30301 81,000 lbs. 41,000 lbs. heavy Duty PAD-36361 93,000 lbs. 43,000 lbs. Part # PAD-48481 135,000 lbs. 52,000 lbs. PAD-24242 PAD-30302 PAD-36362 Medium Duty Pads PAD-48482
Weight 38 lbs. 60 lbs. 86 lbs. 150 lbs. 45 lbs. 68 lbs. 120 lbs.
capacities Vertical 45º Angle 62,000 lbs. 40,000 lbs. 85,000 lbs. 43,000 lbs. 98,000 lbs. 45,000 lbs. 140,000 lbs. 55,000 lbs.
HEAVY Duty Pads
Truck Grounding Equipment Truck Grounding Reels
Provides an efficient and positive means to ground trucks near energized electrical lines. Each reel with factory installed cable includes a 6’ length of 2/O ground cable to connect to the truck and a bronze body clamp to attach to the ground rod.
21364 21365 21374 21375
Small Grounding Reel with 40’ of 1/O cable and clamp Small Grounding Reel with 40’ of 2/O cable and clamp Large Grounding Reel with 50’ of 1/O cable and clamp Large Grounding Reel with 50’ of 2/O cable and clamp
Apparatus Grounding Clamps
www.linestar.ca
T600-2364 Long Ball Stud
Bronze clamps used as part of a truck grounding system. They have a highcurrent rating of 43,000 amps for 15 cycles and 30,000 amps for 30 cycles.
The 3” shank accepts most types of ground clamps. Overall length is 7”.
Part # C600-2100 C600-2101 C600-2300 T600-2320
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Terminal Ferrule Handle Type Type Type Drilled Threaded Shotgun Eye Tapped Threaded Shotgun Eye Pressure Pressure Shotgun Eye Tapped Threaded T-Handle
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
85
GR43BS2 Rotating Ground Adapter
This unique tool provides protection while the conductor is pulled from reels. It adds conductor grounding but does not replace other grounding practices The adapter slides on the reel mandrel. The outer collar connects to the tail of the conductor on the reel and the inner collar is connects to a ground rod.
TETGR Screw Ground Rod
truck accessories
truck ground equipment
A temporary 6’ copperclad ground rod with T-Handle.
Kri-Tech Bond Mat System
The Kri-Tech Bond Mat System is designed and high voltage tested to protect workers who come in contact or have the potential for electrical contact.
Part # HV-101-KT HV-101-KTB HV101-25-50V HV201-25-50V HV601-25-50V 101-25-50SR 101-25-50V 201-25-50SR 601-25-50SR 101-25-50BSF 201-25-50SR
Name Truck Kit 58×58 Truck Kit 58×58 with Ball Studs 58×58 w/3 meter cable and Reflective Edges 58×120 w/4 meter cable and Reflective Edges 120×120 w/4 meter cable and Reflective Edges 58×58 Non Skid 58×58 Non Skid with Reflective Edges 58×120 Non Skid 120×120 Non Skid 58×58 Standard with Ball Stud Ferrules 58×120 Non Skid
Measuring Equipment 7005025 Laser Range Finder
Quickly and accurately calculates horizontal, vertical and slope distance with the press of a button. Typical range is 3,280’ with a max of 6,560’ to a reflective target. Measures in feet, yards, meters and degrees and has an in-scope LED display. Typical distance accuracy + 1 ft.
E-15-1 Truckers Load Height Stick
CHM-600E Cable Height Meter
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
This fiberglass measuring stick extends to 15’ and has a 3’ horizontal arm. The arm folds down and the stick retracts to 68” for easy storage. Marked in feet and inches.
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
A handheld meter for measurement of cable sag, cable height, and overhead clearance, a safe alternative to telescopic ranging sticks. Utilises ultrasonic signals to determine the height of overhead cables up to 23m (75’). The optional DT80 Dynamic Target enables the CHM300DT version Cable Height Meter to also measure horizontal distances to a diameter of more than 80m (260’).
lifting & rigging
86
lifting & rigging blocks Skookum Half-Side Blocks
Regular Yoke
The cast-annealed steel sides and compact design make these blocks rugged and easy to handle and feature precision-machined bronze bearings. The A-4 is available with the regular yoke only. All other models are available with either the regular yoke or swivel shackle.
Sheave Line Weight SWL Part # Size Size (lbs.) (lbs.) A-4 4” 3/8” 9 10,000 A-6 6” 3/8” - 1/2” 17 14,000 A-8 8” 1/2” - 5/8” 29 16,000 A-10 10” 5/8” - 3/4” 34 16,000
Skookum Cast Sided Blocks
Made of the same steel and with the same bearings as the half-side blocks, the sheaves of these cast sided blocks are fully protected. All of these blocks are available with either a swivel shackle, swivel hook or swivel hook with safety latch.
Swivel Hook with Safety Latch
Sheave Line Weight SWL Part # Size Size (lbs.) (lbs.) S-4 4” 3/8” 11 6,000 S-6 6” 3/8” - 1/2” 26 13,000 S-8 8” 1/2” - 5/8” 32 13,000 S-10 10” 5/8” - 3/4” 44 14,000 For Swivel Shackle, use suffix “SS”. For Swivel Hook only, use suffix “SH”. For Swivel Hook with Safety Latch, use suffix “SHL”.
R-10
Skookum Wide Sheave - Wide Throat Blocks
www.linestar.ca
With sheaves made from manganese metal, these durable blocks provide a long service life. Timken bearings come standard on wide throat blocks except the R-4 which has roller bearings. All available with regular yoke only.
R-4, R-6, R-8
Sheave Line Weight SWL Part # Size Size (lbs.) (lbs.) R-4 4” 3/8” 12 10,000 R-6 6” 3/8” - 1/2” 30 16,000 R-8 8” 1/2” - 5/8” 43 16,000 R-10 10” 5/8” - 3/4” 50 18,000
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
87
ROPE ACCESSORIES
lifting & rigging
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
lifting & rigging
88
STRINGING & WINCH LINES When ordering stringing line rope, follow this proceedure from the charts below. Part Number + Length + Color (i.e. SNTN07-8500-GRN)
©Samson Rope Technologies
www.linestar.ca
Stable Braid
AmSteel® ll
AmSteel®-Blue
Chafe gear and thimbles available upon request. Other lengths and eye sizes available. Call Linestar for details. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
89
lifting & rigging blocks The new Buckingham OX BLOCK™ is a rope snatch block with anintegrated friction bar used for hurt man rescue, lowering loads, snubbing loads, and raising loads. It allows the rigging professional to handle loads with greater control. When lowering loads, tension is transferred from the worker to the OX BLOCK™. The OX BLOCK™ replaces standard handline blocks, parted blocks, and various snatch blocks. The OX BLOCK™ also has greater Working Load Limits than blocks of similar size.
50061
Ox Block™ Clevis Top & Hook
50061A-4 OX BLOCK™ with an attached 4’ x 5/8” adjustable sling and a steel carabiner. 50061A-7 OX BLOCK™ with an attached 7’ x 5/8” adjustable sling and a steel carabiner. 50061B OX BLOCK™ only with 2 steel carabiners.
50061A-4
50062D
50071B1
Ox Block with Ox Horn With its 2” gate opening, it is designed to replace a non-rated “meat hook” currently in use by many linemen. It has a working load limit of 2500 pounds with the gate closed and a 1000 pound working load limit with the gate open.
Buck Side Swivel™ Heavy duty aluminum single sheave pulley that has a 5/8” diameter rope capacity with a 2500lbf. load limit.
50061B
OX BLOCK™ With Two Carabiners The OX BLOCK™ is a rope snatchblock with an integrated friction bar used for hurtman/self rescue, lowering, raising and snubbing loads.
5007R2
50072B2
50072B1
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
Double Sheave BuckRigger™ Features a swivel side plate that allows for quick and easy rope installation without removing pulley from the connecting device. Features a 1/2” rope capacity and a WLL of 1800 lbf.
100%
Canadian Owned
www.linestar.ca
Clevis Top Dual Buck Side Swivel™ The Buck Side Swivel™ is now offered in a dual model. This heavy duty aluminum double sheave pulley has a 5/8” diameter rope capacity with a 2500 lbf. working load limit.
Clevis Top Buck Side Swivel™ This heavy duty aluminum single sheave pulley has a 5/8” diameter rope capacity with a 2500 lbf. working load limit.
Alberta: British Columbia: Manitoba: Ontario:
50062
Ox Block™ Sling
lifting & rigging
OX BLOCK™ Ease the Load
lifting & rigging
90
lifting & rigging blocks 50061A-4/80 The OX Block™ Handline Assembly with an attached 4’ x 5/8” adjustable sling, a steel carabiner and an 80’ x 1/2” handline assembly. The OX Block™ handline assembly, as a whole, can be used during pole top rescue. However, DO NOT USE P/N 2406 handline hook [MBS 500 lbs.] or handline snap [MBS 750 lbs.] for human support. All components used for rescue must have a 5000 lb. rating, configured to accept human support. For rigging, ensure the weak link has a 5 to 1 safety factor. 50061A-4/80
50061A-4/80 OX BLOCK™ with an attached 4’ x 5/8” an 80’ x 1/2” handline assembly.* 50061A-4/100 OX BLOCK™ with an attached 4’ x 5/8” an 100’ x 1/2” handline assembly.* 50061A-7/80 OX BLOCK™ with an attached 7’ x 5/8” an 80’ x 1/2” handline assembly.* 50061A-7/100 OX BLOCK™ with an attached 7’ x 5/8” an 100’ x 1/2” handline assembly.*
adjustable sling, a steel carabiner and adjustable sling, a steel carabiner and adjustable sling, a steel carabiner and adjustable sling, a steel carabiner and
2406S-80
5007R1
50071B2
Handline Assembly with Ox Hook 80’ handline featuring the Ox Hook on one end, and a model 1706 steel locking snap hook spliced on the other for added versatility.
Single Sheave BuckRigger™ Feature a swivel side plate that allows for quick and easy rope installation without removing pulley from the connecting device. The single sheave pulley with swivel eye features a 1/2” rope capacity and a WLL of 1800 lbf.
Dual Buck Side Swivel™ Now offered in a dual model. This heavy duty aluminum double sheave pulley has a 5/8” diameter rope capacity with a 2500 lbf working load limit.
5007B1
BuckBully™ Side Swivel Lightweight, high strength aluminum single sheave pulley. 5/8” rope capacity. WLL: 2500lbs.
www.linestar.ca
39078TAG1-4
39078TAG1-4: 4’ x 5/8” adjustable sling. 39078TAG1-7: 7’ x 5/8” adjustable sling. WLL: Straight 3200lbs. Choker 2560lbs. Basket 6400lbs.
Alberta: British Columbia: Manitoba: Ontario:
Note: If ordering adjustable sling separately, two carabiners are required for proper loading (see above).
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
5005S3 Steel triple action carabiner. Meets ANSI Z359.12 standards. MBS 11,240 lbs.
100%
Canadian Owned
91
handlines
lifting & rigging
DR-2 2” Handline Ring
470 Handline Snap
HL6
HL7
Handline Hook
Handline Hook
HLB-1000
Handline Rope
Handline Blocks
A 12-strand rope with an excellent grip. It’s high strength and low stretch qualities along with good UV resistance makes this an ideal handline rope. Made of a multifilament polyester with a polypropylene core.
Smooth running 3” sheaves accomodate rope up to 5/8” diameter. All models have a 1,000 lb capacity at a 3-1 safety factor.
Part # HLB-1250 Aluminum Body, Open Head HLB-1000 Nylon Body, Open Head HLB-1000-2 Nylon Body, Closed Head
Dura-Plex Minimum Part # Diameter Tensile (lbs) SAM 1/2” 6,700 Standard reel lengths of 600’ & 1,200’ Part # Sets with Aluminium Blocks HL08A-40 HLB-1250 Block, 80’ of 1/2 Rope HL08A-50 HLB-1250 Block, 100’ of 1/2 Rope HL08A-75 HLB-1250 Block, 150’ of 1/2 Rope HL08A-100 HLB-1250 Block, 200’ of 1/2 Rope HL10A-40 HLB-1250 Block, 80’ of 5/8 Rope HL10A-50 HLB-1250 Block, 100’ of 5/8 Rope HL10A-75 HLB-1250 Block, 150’ of 5/8 Rope HL10A-100 HLB-1250 Block, 200’ of 5/8 Rope
Complete Handline Sets
Made to order handline sets with either aluminum or nylon blocks and 1/2” or 5/8” diameter 3-strand rope. Standard sets come with the # 258T double eye hook. Each set includes an adjustable 9’ “Becket” to hold the handline in place.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
Custom handline sets can be made to suit your needs. • • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Part # Sets with Nylon Blocks HL08N-40 HLB-1000 Block, 80’ of 1/2 Rope HL08N-50 HLB-1000 Block, 100’ of 1/2 Rope HL08N-75 HLB-1000 Block, 150’ of 1/2 Rope HL08N-100 HLB-1000 Block, 200’ of 1/2 Rope HL10N-40 HLB-1000 Block, 80’ of 5/8 Rope HL10N-50 HLB-1000 Block, 100’ of 5/8 Rope HL10N-75 HLB-1000 Block, 150’ of 5/8 Rope HL10N-100 HLB-1000 Block, 200’ of 5/8 Rope Alberta: British Columbia: Manitoba: Ontario:
HLB-1250
92 lifting & rigging
Rope Blocks
267
Plain Block
268
Block with Eye
H267
Plain Block with Guarded Snap
H268
Block with Eye & Guarded Snap
259
Swivel Anchor Hook
258
Anchor Hook
We can splice Double Braid Polyester Rope into all block at LineStar
Complete Rope Block sets
All slack block sets are supplied with 25’ of 3/8” 3-strand poly rope. Choice of # 258 or # 259 hooks, plain or guarded snap blocks and spliced rope.
Part # Componets 1802-30 258 Hook, 267 & 268 Blocks, Unspliced Rope 1802-30SR 258 Hook, 267 & 268 Blocks, Spliced Rope 1802-30S 259 Hook, 267 & 268 Blocks, Unspliced Rope 1802-30SSR 259 Hook, 267 & 268 Blocks, Spliced Rope H1802-30 259 Hook, H267 & H268 Blocks, Unspliced Rope H1802-30SR 259 Hook, H267 & H268 Blocks, Spliced Ropee H1802-30S 259 Hook, H267 & H268 Blocks, Unspliced Rope H1802-30SSR 259 Hook, H267 & H268 Blocks, Spliced Rope
www.linestar.ca
1702-20N Howe Wire Tool
443A
A forged swivel hook is attached to a 1” wide nylon strap. The hook is long enough to reach under the insulator while the other end holds the load at any distance. 500 lb capacity.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
Snap Hook 1,500 lbs capacity
• • • •
[email protected] [email protected] [email protected] [email protected]
1802-30SSR
2012
Swivel Snap Hook 150 lbs capacity
100%
Canadian Owned
93
Nylon Slings Polyester load yarns protected by a double wall jacket. The wear points can be shifted to extend the life of the sling. Color-coded along industry standards.
Eye to Eye Nylon Slings
# of Rated Capacity (lbs.) Plys Part # Width Vertical Choker Basket EE1-811 1” 1,600 1,250 3,200 3,200 2,500 6,400 One EE1-812 2” EE1-813 3” 4,800 3,800 9,600 Ply EE1-814 4” 6,400 5,000 12,800 EE1-816 6” 9,600 7,700 19,200 EE2-821 Two EE2-822 Ply EE2-823 EE2-824 EE2-826
1” 2” 3” 4” 6”
3,200 2,500 6,400 5,000 8,600 6,900 11,500 9,200 16,300 13,000
lifting & rigging
Roundslings
Rated Capacity (lbs.) Part # Colour Vertical Choker Basket EN30 Purple 2,600 2,100 5,200 EN60 Green 5,300 4,200 10,600 EN90 Yellow 8,400 6,700 16,800 EN120 Tan 10,600 8,500 21,200 EN150 Red 13,200 10,600 26,400 EN180 White 16,800 13,400 33,600 EN240 Blue 21,200 17,00 42,400 EN360 Grey 31,000 24,800 62,00 EN600 Brown 53,000 42,400 106,000 EN800 Olive 66,000 52,800 132,000 EN1000 Black 90,000 72,000 180,000
A variety of nylon slings for a variety of uses. Each ply is approximately 3/16” thick. The nylon stretches to help avoid shock loading.
flat eyes
6,400 12,800 17,200 23,000 32,600
twisted eyes
Specify length when ordering. For twisted eyes, add a “T” suffix to the part number. Eye to eye slings are also available with hardware attached to the eyes.
Endless Nylon Slings
# of Rated Capacity (lbs.) Plys Part # Width Vertical Choker Basket EN1-811 1” 3,200 2,500 6,400 EN1-812 2” 6,400 5,000 12,800 One EN1-813 3” 8,600 6,900 17,200 Ply EN1-814 4” 11,500 9,200 23,000 EN1-816 6” 16,300 13,000 32,600 EN2-821 Two EN2-822 Ply EN2-823 EN2-824 EN2-826
1” 2” 3” 4” 6”
These slings can be rotated to minimize wear and the legs can be spread for improved load balance.
6,200 4,900 12,400 12,200 9,800 24,400 16,300 13,000 32,600 20,700 16,500 41,400 28,600 23,000 57,200
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Specify length when ordering
94 lifting & rigging
Transformer Slings
NRM Transformer Lifting Sling
Adjustable Transformer Slings
• This sling is used to lift transformer into place. • The elastic strap prevents that the sling eyes fall out of the lifting points. • 2800 lbs safe working load at 60º. • NRM-XL is also available with a larger lifting eye to fit on the fork of a lift truck
These polyester transformer slings are adjustable from 24” to 48” in length and the eyes are adjustable from 3” to 15”.
Part # Diameter Colour 689-0328 1/2” Blue 689-0404 5/8” Red 689-0486 3/4” Orange
SWL 2,200 lbs. 3,200 lbs. 4,200 lbs.
1031A Transformer Deck
A safe and effective way to move equipment in tight areas. It measures 32” wide, 93” long and has a 3,000 lbs. capacity. The front axle is a steerable, 2-wheel dolly with a 180º turning radius which doubles as a pole dolly. The rear axle is fixed on the standard model but decks can be ordered with front and back steerable axles.
HA0075 Transformer Dolly
www.linestar.ca
For the safe and easy handling of pole mounted transformer. Designed to maintain the vertical position of the transformer preventing leakage. The hand brake prevents the dolly from rolling back while being tilted. Almost effortless 360º steering. Accepts transformers up to 36” in height and an extension is available for transformers measuring 44”. Load capacity of 900 lbs.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
95
KITO CHAIN HOISTS 3/4 to 9 metric tonne capacity, tough, smooth-operating hoist. KITO L5 Series Lever Hoists are built with premium grade components for long life in demanding industrial and contracting applications. L5 lever hoists feature doublereduction gearing for reduced size and weight.
Black freewheel knob easily distinguishes the slip clutch from standard lever hoists.
hoists
L5LB Series Lever Chain Hoists
L5LB with Optional Slip Clutch
Slip Clutch hoists make for safer worksites. This internal mechanism protects the hoist from damage in the event of an excessive overload, with no increase is size.
Capacity (tonne) Model C D 3/4 L5LB008 280 245 1-1/2 L5LB015 335 265 2-1/2 L5LB025 375 265 3 L5LB030 395 415 6 L5LB060 540 415 9 L5LB090 680 415
a 144 159 173 190 190 190
b e g s t 119 97 23.5 35.5 14 126 100 32 42.5 19 150 102 36.5 47 21 159 112 39 50 24.5 217 112 50 60 34 304 112 72.5 85 41.5
Standard Hand Pull to Capacity Lift Lift Full Load Headroom (tonne) Model (ft) (kg) (in)
L5LB008 5 L5LB015 5 L5LB025 5 L5LB030 5 L5LB060 5 L5LB090 5
27 32 37 35 36 39
11 13.25 14.75 15.5 21.25 26.75
Load Ship Weight per Chain Weight Additional 5 ft. Falls (lbs) Lift (lbs)
9.75 KLB5056 10.5 KLB5071 10.5 KLB5088 16.5 KLB5100 16.5 KLB5100 16.5 KLB5100
1 1 1 1 2 3
13 18 26 35 59 92
3 4 6 8 16 24
Custom lift lengths to suit your requirements Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
3/4 1-1/2 2-1/2 3 6 9
Handle Lenght Load Chain (in) Code
96 84
hoists hoists hoists
chain CHAIn hoists HoISTS
RA RA Model Model Link Link Chain Chain Hoists Hoists
These These aluminum aluminum ratchet ratchet lever lever hoists hoists with with link link type type chain chain are are ideal ideal for for transmission transmission and and distribution distribution applications. applications. The The handle handle length length for for these hoists is 20-1/2” and the standard these hoists is 20-1/2” and the standard lift lift is is 5’. 5’. Extra Extra chain chain is is available. available.
PE-1 PE-1 Pulling Pulling Eye Eye
Adjusts Adjusts from from 1/2” 1/2” to to 1”. 1”. 6,000 6,000 lb. lb. capacity capacity
Rated Handle Pull RatedDuty Pulling Handle Eye Pull Heavy
Weight This pulling eyeCapacity can be usedat loads Load up to 15,000 lbs. Capacity atforRated Rated Load Weight Part # (Tons) (lbs) (lbs) Ultimate 60,000 lbs. Part # (Tons) (lbs) (lbs)
E96HD E96HD Heavy Heavy Duty Duty Pulling Pulling Eye Eye
This This pulling pulling eye eye can can be be used used for for loads loads up up to to approximately 15,000 lbs. Sizes available approximately 15,000 lbs. Sizes available for for 1-1/4”, 1-1/4”, 1-1/2”, 1-1/2”, 1-3/4” 1-3/4” and and 2” 2” anchor anchor rods. rods.
RA-15 3/4 59 14 RA-15 3/4 59 14 RA-20 1 79 14 RA-20 1 79 14 Part # 1-1/2 Fits Anchor Rod Size 21 RA-15-2 60 RA-15-2 1-1/2 60 21 HDPE-1000 1” RA-30 1-1/2 82 26 RA-30 1-1/2 82 26 HDPE-12502 1-1/4” RA-40 110 26 RA-40 2 110 26 HDPE-15003 1-1/2” RA-30-2 93 40 RA-30-2 3 93 40 RA-30-3 4-1/2 96 59 HDPE-1750 1-3/4” RA-30-3 4-1/2 96 59 RA-30-4 97 72 HDPE-20006 2” RA-30-4 6 97 72
HDPE-2250
2-1/4”
Aluminum Aluminum Body Body Link Link Chain Chain Hoists Hoists
www.linestar.ca www.linestar.ca www.linestar.ca
C309-0440 C309-0440
The The lightweight, lightweight, high-strength high-strength handle handle and and housing housing are made of heat-treated aluminum. The are made of heat-treated aluminum. The chain chain is is a a high-strength high-strength alloy alloy steel, steel, polished polished for for smooth smooth action action and and low low wear. wear. All All models models are are proof-tested proof-tested at at 150% 150% of of their rated capacity and have a standard 5’ their rated capacity and have a standard 5’ lift. lift.
Part Part # # C309-0438 C309-0438 3011S 3011S C309-0439 C309-0439 4012 4012 C309-0440 C309-0440 C309-0441 C309-0441 C309-0442 C309-0442
Rated Rated Capacity Capacity (Tons) (Tons) 3/4 3/4 1 1 1-1/2 1-1/2 2 2 3 3 4-1/2 4-1/2 6 6
Handle Handle Pull Pull at at Rated Rated Load Load (lbs) (lbs) 65 65 90 90 60 60 90 90 60 60 70 70 70 70
3011S 3011S
Weight Weight (lbs) (lbs) 14 14 14 14 22 22 28-1/2 28-1/2 30-1/2 30-1/2 47 47 50 50
Alberta: phone: 403-243-1900 •
[email protected] British Columbia: phone: 604-594-2701 • BritishColumbia: Columbia: phone: phone: 604-594-2701 • fax: fax: 604-594-2751 604-594-2751 British 604-594-2701 •
[email protected] Alberta: phone: 403-243-1900 • fax: Alberta: 403-243-1900 • fax: 403-243-2063 403-243-2063 Manitoba: phone:phone: 204-783-9771 •
[email protected] Saskatchewan/Manitoba: phone: 204-783-9771 • Ontario: phone: 905-564-5344 •
[email protected] Saskatchewan/Manitoba: phone: 204-783-9771 • fax: fax: 204-783-8951 204-783-8951
100% 100%
Canadian Canadian Owned Owned
97
MAGNA LEVER hoists
Load tested to 150% of rated capacity Meets ANSI/ASME standards ISO 9001 and TUV-CE Certified factory High quality alloy load chain meets all international safety standards Single-hand control of free-wheel function with load brake Weston Load Brake Parts and service available Rugged steel casing protects gears and brake mechanism
LH025 - 1/2 Ton Lever Hoist
LH075 - 3/4 Ton Lever Hoist
• Capacity (lbs): 550 • Standard Lift (ft): 5, 10, 15, 20 • Load Chain (mm): 4 x 12 • Net Weight (lbs): 5.2 • Min. Distance Between Hooks (in): 9.65 • Minimum Load (lbs): 66 • Pull to Lift Capacity (lbs): 70 • A (in): 3.9 • B (in): 2.36 • C (in): 9.65 • D (in): 5.9 • G (in): 0.79
• Capacity (lbs): 1,650 • Standard Lift (ft): 5, 10, 15, 20 • Load Chain (mm): 6.3 x 19.1 • Net Weight (lbs): 17.6 • Min. Distance Between Hooks (in): 11.02 • Minimum Load (lbs): 66 • Pull to Lift Capacity (lbs): 64 • A (in): 6.18 • B (in): 5.98 • C (in): 11.02 • D (in): 11.02 • G (in): 1.06
LH150 - 1-1/2 Ton Lever Hoist
LH100 - 1 Ton Lever Hoist
• Capacity (lbs): 2,200 • Standard Lift (ft): 5, 10, 15, 20 • Load Chain (mm): 6.3 x 19.1 • Net Weight (lbs): 17.6 • Min. Distance Between Hooks (in): 11.02 • Minimum Load (lbs): 66 • Pull to Lift Capacity (lbs): 64 • A (in): 6.18 • B (in): 5.98 • C (in): 11.02 • D (in): 11.02 • G (in): 1.06
LH300 - 3 Ton Lever Hoist
• Capacity (lbs): 6,600 • Standard Lift (ft): 5, 10, 15, 20 • Load Chain (mm): 9 x 27 • Net Weight (lbs): 37.5 • Min. Distance Between Hooks (in): 17.77 • Minimum Load (lbs): 198 • Pull to Lift Capacity (lbs): 77 • A (in): 7.8 • B (in): 7.48 • C (in): 17.77 • D (in): 15.35 • G (in): 1.5
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
• Capacity (lbs): 3,300 • Standard Lift (ft): 5, 10, 15, 20 • Load Chain (mm): 7.1 x 21 • Net Weight (lbs): 24.3 • Min. Distance Between Hooks (in): 13 • Minimum Load (lbs): 99 • Pull to Lift Capacity (lbs): 64 • A (in): 6.89 • B (in): 5.7 • C (in): 13 • D (in): 15.35 • G (in): 1.26
Alberta: British Columbia: Manitoba: Ontario:
hoists
• • • • • • • •
hoists
98
LH600 - 6 Ton Lever Hoist
LH750 - 8 Ton Lever Hoist
LH900 - 9-1/2 Ton Lever Hoist
STRAP HoISTS STRAP HoISTS
85 85
hoists hoists
344B 344B 344B
fiberglass have anLine. overload feature. The Lift replaceble tips Part # handles Line Cap. Cap. Line Line Lift Weight at all Double interlocking pawls assures thatHandles pawl is Hooks engaged Single Double Single Double Strap With Standard & Strap Hoists With Standard Handles &one Hooks bend to alert the user ofHoists a possible overload. All hooks swivel 360o (tons) (tons) (ft.) (ft.) (lbs.) times for positive load holding . Except for the 6000 series,at the Part #equipped Line Cap. Line. Line Lift Line Lift Weight Double interlocking pawls assures that one pawl is engaged at and are with latches. A Cap. quick disconnect design of the Double interlocking pawls assures that one pawl isallengaged all 250A 1/2 1removal 9thefeature. 4-1/4 11 tips times for positive load holding . Except 6000 series, the sheave block allows for easy for for single line use. fiberglass handles have an overload The replaceble (tons) (tons) (ft.) (ft.) (lbs.) times forhandles positive load holding . Except for the 6000 series, the fiberglass 3/4 an overload feature. The replaceble tips 300A 1-1/2 9 4-1/4 11 360o bend to alert the have userhave of1 aan possible overload. All hooks swivel 250A 1/2 9 4-1/4 fiberglass handles overload feature. The replaceble tips bend to alert the user of a possible overload. All hooks swivel 360o 11 322B 3/4 1-1/2 7 12-1/2 Double with Single Double andSingle are equipped latches. A14 quick disconnect the 300A 3/4 1-1/2 9overload. 4-1/4 11 of 360o bend to alert the user of a possible All hooks swivel and are equipped with latches. A quick disconnect design of thedesign Part # Line Cap. 1Line. Cap. Line Lift Line11 Lift Weight 344B 2 5-1/2 13-1/2 sheave block allows forremoval easyA(ft.) removal for use. singledesign line use. sheave block allows for easy for single line 322B 1-1/2 14 12-1/2 and(tons) are 3/4 equipped latches. quick disconnect of the (tons) with (ft.) (lbs.) 7 6000A N/A 3 N/A 5 25-1/2 344B 1/2 1 block 2 9for easy 11 5-1/2 13-1/2 sheave removal11 for single line use. 250A 1 allows 4-1/4 Double3 9 Single 4-1/4 Double 11 5 300A 1-1/2 6000A 3/4Single N/A N/A 25-1/2 SingleLine. Cap. Double Single Double Line Cap.1-1/2 Weight 322BPart # 3/4 14Line Lift 7 Line Lift 12-1/2 Part # Line Cap. Line. Cap. Line Lift Line (ft.)13-1/2 (lbs.)Lift Weight Single2 (tons) Double Single Double 344B 1 (tons) 11 (ft.) 5-1/2 (tons) (tons) (ft.) (ft.) (lbs.) 250A #N/ALine 1/2 Cap. 1 11 6000A 3 5 4-1/4 Part Line.N/A Cap.9 Line Lift25-1/2 Line Lift Weight 300A 3/4 1-1/2 9 4-1/4 11 250A 1/2 1 9 4-1/4 11 (tons) (tons) (ft.) (ft.) (lbs.) 322B 3/4 1-1/2 14 7 12-1/2 300A 3/4 1-1/2 9 4-1/4 11 250A 1 11 9 4-1/4 11 344B 11/2 2 5-1/2 13-1/2 322B 3/4 14 7 12-1/2 6000A N/A 3 1-1/2 25-1/2 300A 3/4 1-1/2 N/A 95 4-1/4 11
hoists
344B
hoists
STRAP HoISTS STRAP HoISTS STRAP HoISTS sheave block removal for single Double interlocking pawls allows assures for thateasy one pawl is engaged at all line use. Single Double Single Double times for positive load holding . Except for the 6000 series, the strap hoists Strap Hoists With Standard Handles & Hooks
85 85
hoists hoists
• Capacity (lbs): 13,200 • Capacity (lbs): 16,500 • Capacity (lbs): 19,800 • Standard Lift (ft): 5, • Standard Lift (ft): 5, • Standard Lift (ft): 5, 10, 15, 20 10, 15, 20 10, 15, 20 • Load Chain (mm): 9 x 27 • Load Chain (mm): 9 x 27 • Load Chain (mm): 9 x 27 • Net Weight (lbs): 57.3 • Net Weight (lbs): 92 • Net Weight (lbs): 106 • Min. Distance • Min. Distance • Min. Distance Between Hooks (in): 21.65 Between Hooks (in): 25.98 Between Hooks (in): 27.17 Strap Hoists WithLoad Standard • Minimum Load (lbs): 396 • Minimum (lbs): 496 Handles & Hooks • Minimum Load (lbs): 595 interlocking pawls thatHandles one pawl & is Hooks engaged atCapacity all • Pull to Lift Capacity Double Strap • Pull to Liftassures Capacity • Pull to Lift Hoists With Standard times for positive load holding . Except for the series, the (lbs): 77 (lbs): 77 (lbs): 77at Double interlocking pawls assures that one pawl6000 is engaged all • A (in): 7.8 • Ahave (in): 7.8 fiberglass handles an overload feature. The replaceble tips • A (in): 7.8 85 times for positive load holding . Except for the 6000 series, the 344B • B (in): 9.25 • B (in): bend to alerthandles the user of a12.6 possible overload. hooks 360o • swivel B (in): 12.6 STRAP HoISTS fiberglass have an overload feature.All The replaceble tips • C (in): 21.65 • C (in): 27.17 • C (in): 27.17 and are equipped with latches. A quick disconnect design of the 344B bend to alert the user of a15.35 possible overload. All hooks swivel 360o • D (in): 15.35 • D (in): • D (in): 15.35 block allows for easyA removal for singledesign line use. and sheave are equipped quick disconnect the85 • G (in): 1.81 •with GStandard (in):latches. 1.8 Handles • G (in):of 2.76 Strap Hoists With & Hooks
STRAP HoISTS STRAP HoISTS
6000DA 6000DA
6000DA
6000DA
344B 1HoISTS1-1/2 2 11 5-1/2 13-1/2 322B 3/4 14 7 12-1/2 STRAP Strap Hoists With Hot Stick Handles & Hooks 6000A N/A 3 N/A 5 25-1/2 344B 1 2 11 5-1/2 13-1/2 6000A Strap N/AHoists With 3 Hot Stick N/AHandles5& Hooks 25-1/2 Hoists Hot Stick HandlesDouble & Hooks StrapStrap Hoists With Hotwith Stick Handles & Hooks Single Double Single HoISTS Part #STRAP Line Cap. Line. Cap. Line Lift Line Lift Weight Single Double SingleSingle Double Double Single Double (tons) (tons) (ft.) (ft.) (lbs.) # Cap. Line Line. Cap.Cap. Line. Cap. LineLiftLiftWeight Line Lift Weight PartPart # Line Line Lift Line 250DA 1/2(tons) 1(ft.) 9 & Hooks 11 Strap (tons) Hoists With Hot Stick Handles (tons) (ft.) (lbs.)4-1/4 (tons) (ft.) (ft.) (lbs.) 250DA 1/2 3/4 1 9 4-1/4 11 4-1/4 300DA 1-1/2 9 11 250DA3/4Single 1/21-1/2 1 9 Single 4-1/4 9Double 11 4-1/4 11 Double 300DA 322DB 3/4 1-1/2 14 7 12-1/2 300DA 1-1/2 9 Lift 4-1/4 11 Part # 3/4 Line 3/4 Cap.1-1/2 Line. Cap. Weight 322DB 14Line Lift 7 Line 12-1/2 344DB 1 2 11 5-1/2 13-1/2 (lbs.) 322DB Strap 3/4 1-1/2 14(ft.) 7& Hooks 12-1/2 344DB 1 (tons) 2 (tons) 11 (ft.) 5-1/2 13-1/2 Hoists With Hot Stick Handles 6000DA N/A N/A 5 25-1/2 250DAN/A 1/2 4-1/425-1/2 11 6000DA 511 344DB 1 3 1 3 2N/A 9 5-1/2 13-1/2
STRAP HoISTS STRAP HoISTS
300DA Strap 3/4 Hoists 1-1/2 9 Stick4-1/4 With Handles11 6000DA N/A 3 Hot N/A 5& Hooks 25-1/2 322DB 3/4 14 7 12-1/2 Single 1-1/2Double Single Double
6000DA 6000DA
Alberta: phone: 403-243-1900 • Specify special hooks or
[email protected] latches when ordering. Specify special hooks or latches when ordering. British Columbia: phone: 604-594-2701 •
[email protected] British Columbia: phone: 604-594-2701 • fax: 604-594-2751 Canadian 100% Manitoba: phone: 204-783-9771 •
[email protected] Alberta: phone: 403-243-1900 • fax: 403-243-2063 Canadian Ontario: phone: 905-564-5344 •
[email protected] Owned Saskatchewan/Manitoba: phone: 204-783-9771 • fax: 204-783-8951 Owned
100%
British Columbia:
phone: 604-594-2701 • fax: 604-594-2751
www.linesta www.line
1 Cap. 2Line. Cap. 11 5-1/2 Line Lift 13-1/2 Line Lift Weight Single 3 DoubleN/A Line Single Double N/A 5 25-1/2 (tons) (tons) (ft.) (ft.) (lbs.) Part # Line Cap. Line. Cap. Line Lift Line Lift Weight 250DA 1/2 1 9 4-1/4 11 (tons) (tons) (ft.) (ft.) (lbs.) 300DA 3/4 1-1/2 9 4-1/4 11 250DA 1/2 1 9 4-1/4 11 Standard Hot Stick Swivel Gate Hot Stick & 322DB 3/4 1-1/2 14 7 12-1/2 300DA 3/4 1-1/2 9 Latch 4-1/4 11 Hook Hook Hook Gate 344DB 1 2 11 13-1/2 Standard Hot 1-1/2 Stick Swivel Gate 5-1/2 Hot & 322DB 3/4 14Hook 7 Stick 12-1/2 6000DA N/A 3 N/A 5 25-1/2 Hook Hook Hook Gate Latch 344DB 1 2 11 5-1/2 13-1/2 Specify special hooksHot or latches when ordering. Standard Stick Swivel Gate Hot Stick & Standard Hot Stick Swivel Gate Hot Stick & Hook 6000DA N/A 3 N/A 5 25-1/2 Specify special hooks or latches when ordering Hook Hook HookHook Hook Hook Gate LatchGate Latch Specify special hooks or latches when Hook Hook ordering.
www.linesta www.linestar.ca
www.linestar.ca
344DB Part # 6000DA
99
strap Hoists
PSC3090452
hoists
The heat-treated aluminum-alloy frame is of an open design for self-cleaning in mud or ice. The interlocking pawls allow for sure control without brakes that can slip. Standard lift on all models is 6’ in single strap mode and 3’ in double strap mode.
Capacity Capacity Part # Hook & Handle Type Single Line Double Line Weight (tons) (tons) (lbs.) PSC3090451 Standard Hooks & Handle 3/4 1-1/2 12-1/2 PSC3090452 Hot Stick Hooks & Handle 3/4 1-1/2 13-1/2
Non-Convertible Strap Hoists
All of these models come with Hot Stick Rings on the hooks and latches. The 1 Ton models have a single strap with a standard lift of 5’ - 9” while the 2 Ton models have a double strap with a lift of 3’ - 9”.
Capacity Weight Part # Handle Type (tons) (lbs.) PSC309-0323 Standard Handle 1 12-3/4 PSC309-0467 Hot Stick Handle 1 13-3/4 PSC312-0000 Standard Handle 2 14-1/2 PSC309-0468 Hot Stick Handle 2 15-1/2
C312-0000
For 4 foot handle please add -H5016
LINK STICKS 1-1/4” diameter Epoxiglas® poles with steel hook on one end and butt swivel on the other end. 4,000 lbs. working load.
Length Between Weight Fittings 15” 4 lbs. 18” 5 lbs. 24” 6 lbs.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Part # C400-1175 C400-2399 C400-2400
100
hoists
Hook Web Strap Hoist
strap hoists
Hook Web Strap Hoists are manufactured utilizing high strength die cast aluminum main frame and components, creating tighter tolerances and extra durability for the end user. The Hook web strap hoist utilizes a polyester strap, rather than a nylon strap, which goes to work in 5 clicks, rather than 10, saving time and extra work on the lineman’s part. The handle adapter is designed to bend in case of overload. The adapter is quickly changed in the field using a Phillips screw driver to replace, immediately reinsert into the U-frame to finish the job. Every hoist has a QR code allowing anyone that touches the tool to have quick access to Hook’s information should there be any questions whatsoever and a serial number for easy tracking. The double-flanged drum holds the strap securely in place, reducing wear and tear on the strap sides and preventing the strap from slipping into the gear mechanism for added safety. All lineman hoists are equipped with a quick release knob that allows for easy storage of the tool and removal of the fiberglass handle in one quick motion. There is also a quick release pin on the pulley block for ease of use in the field, no wing nuts, just click pins. Each and every hoist is tested at 125% of its capacity before it leaves our manufacturing facility.
www.linestar.ca
• • • • • • • • • • • • •
High strength precision die cast frame and components – Durability Each Hook hoist goes to work in just 5 clicks – industry standard is 10 clicks – Efficiency Handle adaptor bends if overloaded – Safety RFID, QR code & individual serial # for tracking – Saves time and eliminates hassle. Double flange drum to protect strap – Low maintenance Strap can be replaced in less than 4 minutes – Low maintenance & efficient Release knob – just lift & release handle – Saves time Quick release pins on pulley block – Ease of use Load tested to 125% of rated capacity – meets & exceeds ASME B30.21 standards – Quality Interlocking pawl system – Safety 303 stainless steel shafts – Quality Forged steel hooks w/HD latches & hot stick rings – Durability Rear protective built-in strap guide – Easy to maintain
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
101
Capstan Hoists, 1,000-lb Capacity C308-1170
hoists
Lightweight yet powerful, these portable hoists can get into remote or difficult-access sites. They perfom a variety of tasks such as pole setting, pulling wheeled equipment over obstacles, raising transformers, stringing and tensioning conductors, pulling cable, and much more. Control is so accurate, loads can be moved fractions of an inch.
Electric Capstan Hoists
All electric capstan hoists are furnished with foot controls. The 12 Volt DC model comes with 25’ of #2 Cu cable, 4 terminals, relay and the foot switch.
Part # C308-1170 C308-1171 C308-1172
Voltage 115 Volt AC 230 Volt AC 12 Volt DC
Weight 49 lbs. 49 lbs. 56 lbs.
C308-1180 Hydraulic Capstan Hoist Equipped with 3/8” NPT flat face couplers and dust caps. Order foot control switch part #C308-0685 separately.
C308-1190 Gasoline Drive Capstan Hoist Foot throttle control is included. Features a 35cc 4-cycle engine. Mounting bracket # C308-0925 is recommended for this hoist.
Operator effort remains low for typical loads simply by adding wraps on the capstan drum. 4 wraps of rope = 1:44 ratio. That is, 1 lb. pull on Fall Line develops 44 lb. on Load Line Therefore, 20 lb. of pull develops 880 lb. of lift.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
Source, Minimum 14 Amp Motor Current 7 Amp Motor Current 90 Amp Motor Current 8 Gal/ min. & 1,000 PSI Engine Speed: 7,000 RPM
100%
Canadian Owned
www.linestar.ca
NOTE: Always use at least as many wraps of rope on the drum to lower a load as required to lift that load.
Rope Speed for Part # 1,000 lb. Load C308-1170 40 Feet Per Minute C308-1171 21 Feet Per Minute C308-1172 22 Feet Per Minute C308-1180 93 Feet Per Minute C308-1190 40 Feet Per Minute
1,000-lb. Capstan Hoist Accessories
hoists
102
C308-0925
C3081434P
Universal Bracket
C308-1335
Bolt Down Bracket
All-Purpose Bracket
E308-1334P 72” Chain Clamp for E308-1321P or C308-1335
C417-0346 85” Chain Clamp for C308-0925 Bracket
C308-0856
Rope Lock Device
shown with C-Bracket attached
C308-0903
C308-0890
www.linestar.ca
Swivel Bracket
T308-0999
C-Bracket
Hitch-Receiver Mount
C417-0337
C308-0685
Electric Foot Control Switch
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Hydraulic Foot Control Switch
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
103
Capstan Hoists, 3,000-lb Capacity
hoists C308-1380 Hydraulic Capstan Hoist
C308-1370 Electric Capstan Hoist
Comes with 3/8” flat face couplers. Order foot control switch separately.
115 Volts AC. Includes foot control switch.
C308-0900 Hydraulic Capstan Hoist With bayonet adapter installed.
C308-1390 Gasoline Drive Capstan Hoist
Includes foot control switch and 35cc, 4-cycle engine.
Operator effort remains low for typical loads simply by adding wraps on the capstan drum. 4 wraps of rope = 1:44 ratio. That is, 1 lb. pull on Fall Line develops 44 lb. on Load Line Therefore, 20 lb. of pull develops 880 lb. of lift.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
NOTE: Always use at least as many wraps of rope on the drum to lower a load as required to lift that load.
Rope Speed for Source, Part # 1,000 lb. Load Minimum C308-1370 12 Feet Per Minute 14 Amp Motor Current C308-1380 30 Feet Per Minute 8 Gal./ Min. & 1,000 PSI C308-1390 11 Feet Per Minute Engine Speed: 7,000 RPM
3,000-lb. Capstan Hoist Accessories
hoists
104
C3081434P
C308-1443
Bolt Down Bracket
All-Purpose Bracket
E308-1334P
C417-0341
72” Chain Clamp
Removable Capstan Drum
C308-0820 Bayonet Adapter
C308-0856
www.linestar.ca
Rope Lock Device
2-7/16” Dia. to retrofit 3,000 lb. hydraulic capstan to accept collapsible reel or capstan drum.
C417-0337
C308-0685
Electric Foot Control Switch
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Hydraulic Foot Control Switch
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
105
Wire Pulling Grips
The round jaws on these grips provide maximum contact with the cable virtually eliminating conductor damage. The 1628-50 is furnished with a removable floating jaw held in place by a bolt swaged into the lever arm of the grip. This jaw must be removed to insert the cable.
*Miniumum *Maximum Part # Cable Cable
wire grips
Chicago Grips for Large Diameter Conductors
Maximum Jaw Approx. Safe Load Length Weight
1628-16P .31” (# 2 ACSR) .88” (477,000 ACSR) 15,000 lbs. 7-1/4” 17 lbs. 1628-30 ** .85” (477,000 ACSR) 1.24” (1,033,500 ACSR) 20,000 lbs. 10-3/4” 27 lbs. 1628-40 ** 1.24” (1,033,500 ACSR) 1.54” (1,590,000 ACSR) 25,000 lbs. 10-3/4” 34 lbs. 1628-50 ** 1.00” (666,600 ACSR) 1.82” (2,500,000 Alum) 25,000 lbs. 10-3/4” 34 lbs. * The range of wire s that each grip can accommodate. Each grip is milled to one specific wire size within that range. ** Maximum safe stringing tension 12,500 lbs. to minimize conductor damage.
Chicago Grips for Bare ACSR, Aluminum & Stranded-Copper
The round, smooth jaw contour is ideal for bare ACSR, aluminum and stranded-copper cables and is less likely to damage the conductor. The hot-line latch closes automatically to prevent the grip from disengaging from the wire.
with hot-line latch
Maximum Jaw Approx. Safe Load Length Weight 4,500 lbs. 4” 3 lbs. 4,500 lbs. 4-3/4” 3.75 lbs. 8,000 lbs. 5-1/2” 8.30 lbs. 8,000 lbs. 5-1/2” 8.30 lbs. 8,000 lbs. 5-1/2” 8.20 lb
To order grips with the Hot-Line Latch, add “H” to the end of the part number.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
*Miniumum *Maximum Part # Cable Cable 1656-20 .20” (# 6 ACSR) .40” (1/O ACSR) 1656-30 .31” (# 2 ACSR) .53” 1656-40 .53” .74” (336,400 CM ACSR) 1656-50 .74” (397,500 CM ACSR) .86” (477,000 CM ACSR) 1656-60 .86” (477,000 CM ACSR) .96” (605,000 CM ACSR)
wire grips
106
Wire Pulling Grips Chicago Grips for Aluminum Conductors
Locking loop handles and spring allow the jaws to be held open for easier placement on the cable. These lightweight grips are ideal for use on aluminum conductors. Hot-Line latches are available by special order.
*Miniumum *Maximum Maximum Jaw Approx. Part # Cable Cable Safe Load Length Weight
1678-20 1678-30 1678-40 1678-50
.96” 1.02” 1.08” 1.08”
1.02” 1.08” 1.14” 1.14”
8,000 5,500 5,500 5,500
lbs. lbs. lbs. lbs.
5-11/16” 5-11/16” 5-11/16” 5-11/16”
8.30 8.20 8.20 8.20
lbs. lbs. lbs. lbs.
Chicago Grips for Bare Wire
This is a lightweight and economical grip. The single “V” groove jaw is designed for working with solid and stranded bare wire.
*Miniumum *Maximum Part # Cable Cable
1613-30
.08”
.20”
Maximum Jaw Approx. Safe Load Length Weight
1,500 lbs.
3”
1.50 lbs.
Chicago Grips for Weatherproof Wire
Notches in the jaws provide a firm grip on insulation. Due to various types of weatherproof coatings, the selection of the proper grip is determined by the outside diameter.
*Miniumum *Maximum Maximum Jaw Approx. Part # Cable Cable Safe Load Length Weight
www.linestar.ca
1611-20 1611-30 1611-40 1611-50 WARNING:
.20” .31” .53” .78” • • • •
.40” .53” .74” .88”
4,500 lbs. 4,500 lbs. 8,000 lbs. 8,000 lbs.
4-3/16” 4-3/4” 5-11/16” 5-11/16”
3 lbs. 3.75 lbs. 7.75 lbs. 7.75 lbs.
Grips are to be used for temporary installation, not for permanent anchorage. Do not exceed rated capacity. Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on or near energized lines, ground, insulate or isolate grip before pulling.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
107
Wire Pulling Grips
The 1684-5AT is identical to the Bell-System type”L” strand puller and the 1628-16AT is identical to the “H” strand puller. Equipped with chain, toggle and shackle. The Double “V” jaws assure proper alignment of the wire and jaws.
The 1659-5AT grip is similar to the Bell-System type “B” strand puller. The serpentine grooves provide excellent grip on strand preventing slippage. The round jaws provide maximum gripping power and reduced conductor damage.
1659-5AT
*Miniumum *Maximum Part # Cable Cable
1684-5AT 1628-16AT 1692-5AT 1659-5AT
.218” .31” .218” .20”
wire grips
Chicago Grips - Bell-System Type Grips 1684-5AT
.55” .62” .55” .37”
Maximum Jaw Approx. Safe Load Length Weight
8,000 lbs. 15,000 lbs. 8,000 lbs. 5,000 lbs.
5” 7-1/4” 5” 5”
6.90 lbs. 15.80 lbs. 6.60 lbs. 6.70 lbs.
Chicago Grips - Curved-Jaw for EHS Cable
When pulling extra-high strength galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip. To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double”V” contour.
*Miniumum *Maximum Part # Cable Cable
Alberta: British Columbia: Manitoba: Ontario:
55” .55”
phone: phone: phone: phone:
8,000 lbs. 8,000 lbs.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
5” 5”
6.30 lbs 6.50 lbs.
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
1684-74 .218” . S1684-74H * .218” * Hot-Line Latch and spring.
Maximum Jaw Approx. Safe Load Length Weight
wire grips
108
wire pulling grips Chicago Grips for Extra-High Strength Cables, Messenger, Guy Strand & Conductors The Double “V” grooves give four-point contact, reducing the chance of slipping and providing proper alignment of wire and cable. The hot-line latch closes automatically to prevent the grip from disengaging from the wire.
1684-5C
*Miniumum *Maximum Maximum Jaw Approx. Part # Cable Cable Safe Load Length Weight 1613-40 ** .12” .37” 4,500 lbs. 4-3/16” 3 lbs. 1684-5 ** .218” .55” 8,000 lbs. 5” 6.25 lbs. 1692-5 .218” .55” 8,000 lbs. 5” 6.40 lbs. 1684-5C .16” .55” 8,000 lbs. 5” 6.25 lbs. 1684-5F * .16” .55” 8,000 lbs. 5” 6.25 lbs. 1628-16 .31” .62” 15,000 lbs. 7-1/4” 15.30 lbs. 1628-17 .50” .75” 15,000 lbs. 7-1/4” 16. lbs. 1628-18 .75” 1.00” 15,000 lbs. 7-1/4” 15.70 lbs. * Similar to the 1684-5 but with a file inserted in the jaw for extra gripping power. Replacement file part # 578. Replacement screws part # 573. ** Available with Hot-Line Latch. Add “H” to the end of the part number. Chicago Grips for PVC-Covered Conductors The serpentine jaws are specially machined to accept insulated conductor through the jaws reducing the danger of slippage which may result in insulation damage and also eliminates the necessity of stripping the insulation.
www.linestar.ca
*Miniumum *Maximum Maximum Jaw Approx. Part # Cable Cable Safe Load Length Weight 1659-20 .20” .42” 4,500 lbs. 4-3/16” 3 lbs. 1659-30 .31” .50” 4,500 lbs. 4-3/4” 3.75 lbs. 1659-40 .49” .79” 8,000 lbs. 5-11/16” 7.75 lbs. 1659-50 .79” 1.01” 8,000 lbs. 5-11/16” 7.75 lbs. WARnInG:
• • • •
Grips are to be used for temporary installation, not for permanent anchorage. Do not exceed rated capacity. Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on or near energized lines, ground, insulate or isolate grip before pulling.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
109
Wire Pulling Grips
wire grips
Parallel-Jaw Grips A longer jaw achieves a firm hold preventing slippage and damage to the cable. The latch helps to hold the cable position in the grip jaws. All have the double”V” jaws. Models 1686-20 & 1672-10 have knurled jaws.
*Miniumum *Maximum Maximum Jaw Approx. Part # Cable Cable Safe Load Length Weight
1686-10 1686-20 1671-10 1672-10
.20” .20” .37” .37”
.40” .40” .75” .75”
10,000 lbs. 4,500 lbs. 8,000 lbs. 8,000 lbs.
4-3/8” 4-3/8” 4-3/8” 4-3/8”
5 lbs. 5 lbs. 5 lbs. 5 lbs.
Parallel-Jaw Grips These lightweight and compact grips pull a wide range of cable sizes and types. The bottom jaw is serrated to firmly grip insulated cables and conductors. It’s uniques design includes a latch which prevents the grip from becoming disengaged from the cable.
*Miniumum *Maximum Maximum Jaw Approx. Part # Cable Cable Safe Load Length Weight
1685-20 1685-31
.157” .625”
.886” 1.250”
4,500 lbs. 7,500 lbs.
2.50” 4.50”
3 lbs. 5 lbs.
1716-60 Parallel Jaw Grip for Tree Wire The only grip solution specifically designed for Hendrix© Aerial Cable. “Tree wire”, or PVC-coated conductor, is often used in areas where power outages are common due to falling trees or branch contact. The PVCcoated cable is able to withstand contact with branches and trees during bad weather without disruptions to service. Cable Diameter Range 0.7” to 1.3”
• Grips are to be used for temporary installation, not for permanent anchorage. • Do not exceed rated capacity. • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. • When used on or near energized lines, ground, insulate or isolate grip before pulling. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
WARNING:
Jaw Length Max. Safe Load 5-1/8’’ 12,000 lbs.
wire grips
110
Wire Pulling Grips Wide Range Parallel-Jaw Grips Designed to accomodate a wider range of wire so that multiple grips are not required for multiple wire sizes.
Spring Loaded Grips *Miniumum *Maximum Maximum Jaw Approx. Part # Cable Cable Safe Load Length Weight KT4500 .180” .600” 5,000 lbs. 3” 3.75 lbs. KT4600 .300” .800” 10,000 lbs. 5” 7 lbs.
Spring Loaded Grips with Hot Latch & Locking Handle *Miniumum *Maximum Maximum Jaw Approx. Part # Cable Cable Safe Load Length Weight KT4501 .180” .600” 5,000 lbs. 3” 3.75 lbs. KT4601 .300” .800” 10,000 lbs. 5” 7 lbs.
Spring Loaded Grips with Hot Latch
*Miniumum *Maximum Maximum Jaw Approx. Part # Cable Cable Safe Load Length Weight KT4502 .180” .600” 5,000 lbs. 3” 3.75 lbs. KT4602 .300” .800” 10,000 lbs. 5” 7 lbs.
Haven’s Grips
Designed for use when a light compact grip is desired and where conductor damage is not a concern. Model # 1604-20L and the 1625 series have a swing latch to hold the grip on the cable.
www.linestar.ca
1604-20
1604-20L
1625-20
*Miniumum *Maximum Part # Cable Cable 1604-10 .06” .25” 1604-20 .125” .50” 1604-20L .125” .50” 1625-20 .28” .75” Wire Rope 1625-20 7/8 .38” .88” Wire Rope 1625-20 1 .50” 1” Wire Rope
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
Maximum Approx. Safe Load Weight 2,500 lbs. 1 lb. 5,000 lbs. 2.0 lbs. 5,000 lbs. 2.0 lbs. 8,000 lbs. 4 lbs. 8,000 lbs. 4 lbs. 8,000 lbs. 4 lbs.
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
111
wire pulling grips
wire grips
LMG2000
LMG4500
LMG4900 LMG4501 All models are rated for a variety of wire sizes and types, so fewer grip changes are required. The notched handle locks the grip in the open position for placement on or removal from wire, then releases instantly. The spring loaded models allow a lineman to use a holding stick to open the gate and place the grip on the wire. When released, the gate closes and prevents the grip from falling off the wire.
*Miniumum *Maximum Maximum Approx. Part # Cable Cable Safe Load Weight LMG1000 ** .04” .394” 1,000 lbs. 1/2 lb. LMG2000 ** .109” .594” 2,000 lbs. 1 lb. LMG4500 .18” .60” 5,000 lbs. 3-1/4 lbs. LMG4600 .30” .80” 10,000 lbs. 4-1/2 lbs. LMG4800 .70” 1.25” 12,000 lbs. 8 lbs. LMG4700 .70” 1.25” 20,000 lbs. 21 lbs. LMG4900*** 1.24” Aluminum 1.8” Aluminum 20,000 lbs. 26 lbs. ** LMG1000 & LMG2000 both have bulldog-type jaws. All other models have parallel jaws. *** LMG4900 should be used on aluminum conductor only
Hot Line Grips - Spring Loaded & Notched Handle *Miniumum *Maximum Part # Cable Cable LMG4501 .18” .60” LMG4601 .30” .80” LMG4801 .70” 1.25” LMG4701 .70” 1.25”
Maximum Approx. Safe Load Weight 5,000 lbs. 3-1/4 lbs. 10,000 lbs. 4-1/2 lbs. 12,000 lbs. 8 lbs. 20,000 lbs. 21 lbs.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Hot Line Grips are also available without springs or notched handles. Most grips are available with aggressive or fine teeth.
112
Wire Pulling Grips
wire grips
Wedge-Type Grips
The exclusive wedge-grip action provides a positive, tight grip on the conductor for a non-kinking, in-line pull. When installed, the safety latch drops over the conductor slot to keep the grip on the conductor.
Part # Left Hand
1833-3
Part # Minimum Maximum Right Hand Cable Cable Capacity
16847 16847-1 1833-2 1833-3 1833-4 1833-5 1833-22 1833-21
.128” .128” .258” .258”
.292” .563” 1.050” 1.126”
2,000 lbs. 6,000 lbs. 5,500 lbs. 5,500 lbs.
HCC477 Come-A-Long Grips • • • • • • •
Used in-line for pulling of power cables Safety lock that keeps the come-a-long on the conductor Floating keeper for better alignment on conductor Slide bar is locked when safety lock is up and in use Hardened steel rollers for smooth operation Can be installed with an operating stick Easy to operate
Conductor Max Work Load Weight Part # Description Range (lbs.) (lbs.) HCC-477L Left 125 5 #4-477 ACSR (0.25-0.81) 4,500 lbs. 3.8 lbs. HCC-477R Right 125 5 #4-477 ACSR (0.25-0.81) 4,500 lbs. 65 lbs.
Bolted-Grips (Pocketbook Style)
The body is a lightweight heat treated aluminum. Recommended for high voltage conductors. These grips are custom-bored to a specific conductor. Specify conductor type and diameter when ordering.
www.linestar.ca
LH62-6
Part # LH62-6 LH62-8 LH62-16
Number of Maximum Capacity Capacity Bolts Cable Dia. (ACSR) (ACSS) 6 1-1/4” 12,000 lbs. 9,000 lbs. 8 2-1/2” 20,000 lbs. 15,000 lbs. 16 2-1/2” 40,000 lbs. 30,000 lbs.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
Weight 22 lbs. 65 lbs. 125 lbs.
100%
Canadian Owned
113
wire pulling grips
wire grips
Wire Grips • Pull the trigger by one hand and the grip will be opened easily and release instantly to quickly insert or remove wire. • Special designed for gripping a wider range of cables. • Forged alloy steel construction is durable yet lightweight, yellow chromate finish protects grips from rust and corrosion. • Widely to be used in the power, communications, and general construction fields to pull wire and cable. Used for pulling up lines to tension only. Not to be used as anchors. • Jaw is available for large teeth, aggressive teeth, and fine teeth for different applications. Part #
Safety Load Min. Cable Max. Cable Jaw Length Weight Cable Type
*16-TG45
5000 Lbs.
.196” (5mm)
16-TG48
10000 Lbs.
0.7” (18mm) 1.38” (35mm) 4-3/4” (120mm) 5.2 Lbs.
Bare AL, AAC, ACSR, ACSS, CU Cable
16-TG451
5000 Lbs.
.196” (5mm)
3-1/2” (90mm) 3.3 Lbs.
Hot-Line Grip Spring Loaded Latch Handle
16-TG481
10000 Lbs.
0.7” (18mm) 1.38” (35mm) 4-3/4” (120mm) 5.2 Lbs.
Hot-Line Grip Spring Loaded Latch Handle
.87” (22mm)
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
Bare AL, AAC, ACSR, ACSS, CU Cable, *Guy Strand
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
.87” (22mm)
3-1/2” (90mm) 3.3 Lbs.
wire grips
114
Wire Mesh Pulling Grips These grips are designed for pulling ACSR, bare aluminum or copper conductors, ground wires, messenger strands, wire ropes and insulated cables.
Multiple Strength Grips - Flexible Eye Approx. Break Cable Dia. Part # Strength ** Range 00681-006 6,800 lbs. .25” - .49” 00681-012 10,000 lbs. .50” - .74” 00681-019 14,400 lbs. .75” - .99” 00681-025 24,600 lbs. 1.00” - 1.24” 00681-032 30,600 lbs. 1.25” - 1.49” 00681-038 30,600 lbs. 1.50” - 1.74” 00681-048 48,000 lbs. 1.75” - 2.24” 00681-048 48,000 lbs. 2.00” - 2.49”
Eye Dia. Mesh & Length Length Colour 1/4” x 9” 26” Dark Green 5/16” x 9” 32” Brown 3/8” x 11” 41” Light Blue 1/2” x 12” 52” Gold 1/2” x 12” 56” Black 1/2” x 12” 60” Red 5/8” x 18” 70” Dark Blue 5/8” x 18” 50” Yellow
Multiple Strength Grips - Rotating Eye Part # 00682-006 00682-012 00682-019 00682-025 00682-032 00682-038 00682-048 00682-048
Approx. Break Cable Dia. Strength ** Range 6,800 lbs. .25” - .49” 10,000 lbs. .50” - .74” 14,400 lbs. .75” - .99” 24,600 lbs. 1.00” - 1.24” 30,600 lbs. 1.25” - 1.49” 30,600 lbs. 1.50” - 1.74” 48,000 lbs. 1.75” - 2.24” 48,000 lbs. 2.00” - 2.49”
Eye Dia. Mesh & Length Length Colour 7/8” x 5” 26” Dark Green 1” x 6” 32” Brown 1” x 6” 41” Light Blue 1-3/8” x 8” 52” Gold 1-5/8” x 8” 56” Black 1-7/8” x 9” 60” Red 1-7/8” x 10” 70” Dark Blue 1-7/8” x 10” 50” Yellow
www.linestar.ca
** The Maximum Recommended Load is 20% of the Approximate Breaking Strength based on a 5:1 safety factor.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
115
Wire Mesh Pulling Grips
wire grips
Designed for overhead transmission line stringing applications, these are the highest strength grips available. They have the dual function of working with both bare and insulated conductors and synthetic rope.
Dua-Pull Grips - Flexible Eye Approx. Break Cable Dia. Rope Dia. Eye Dia. Mesh Part # Strength ** Range Range * & Length Length Colour 00695-019 6,500 lbs. .19” - .37” .25” x .65” .22” x 10” 24” Black 00695-038 14,000 lbs. .38” - .62” .50” x .90” .375” x 12” 36” Dark Green 00695-063 20,000 lbs. .63” - .87” .75” x 1.10” .437” x 13” 48” Red 00695-088 30,600 lbs. .88” - 1.12” 1.00” x 1.50” .500” x 15” 60” Dark Blue 00695-113 46,800 lbs. 1.13” - 1.37” 1.25” x 1.70” .625” x 18” 76” Yellow 00695-138 66,500 lbs. 1.38” - 1.90” 1.50” x 2.10” .750” x 24” 89” Aluminum * For rope, select the smallest size grip which meets the required working load. ** The Maximum Recommended Load is 20% of the Approximate Breaking Strength based on a 5:1 safety factor.
Dua-Pull Feed Tubes Part # 00696-019 00696-038 00696-063 00696-088 00696-113 00696-138
Rope Diameter Length .25” - .65” 28” .50” - .90” 40” .75” - 1.10” 52” 1.00” - 1.50” 67” 1.25” - 1.70” 83” 1.50” - 2.10” 96”
For Use with Grip # 033-27-1037 033-27-1038 033-27-1039 033-27-1040 033-27-1041 033-27-1042
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Full lines of support grips and strain relief grips are available as well as grips for low tension pulling and fiber optics.
wire grips & swivels
116
Wire Mesh Pulling Grips Multi Weave Grips - Flexible Eye
These grips are used primarily for pulling aluminum conductor and the triple weave construction is ideal for heavy loads. Approx. Break Cable Dia. Mesh Part # Strength ** Range Length Colour
ZCS1710 ZCS1711 ZCS1712 ZCS1713 ZCS1714 ZCS1715 ZCS1716 ZCS1750 ZCS1751 ZCS1752 ZCS1753
7,000 lbs. 10,500 lbs. 14,100 lbs. 25,000 lbs. 31,000 lbs. 31,000 lbs. 49,000 lbs. 49,000 lbs. 49,000 lbs. 49,000 lbs. 49,000 lbs.
.25” - .50” .50” - .75” .75” - 1.00” 1.00” - 1.25” 1.25” - 1.50” 1.50” - 1.75” 1.75” - 2.25” 2.00” - 2.50” 2.50” - 3.00” 3.00” - 3.50 3.50” - 4.00”
31” 45” 43” 65” 59” 82” 82” 72” 72” 74” 76”
Dark Green Brown Light Blue Gold Black Red Dark Blue Yellow Orange Aluminum Light Green
High Strength Grips - Flexible Eye
Used for pulling either aluminum conductor or synthetic rope, this is the strongest type of grip. Feed tubes listed below are for inserting rope into the grips. Approx. Break Cable Dia. Part # Strength ** Range
ZCS1799 ZCS1800 ZCS1801 ZCS1802 ZCS1803 ZCS1804
Rope Dia. Mesh Range Length Colour
7,000 lbs. .19 - .40” .25” - .65” 14,000 lbs. .40” - .63” .50” - .90” 20,000 lbs. .63” - .88” .75” - 1.10” 30,700 lbs. .88” - 1.13” 1.00 - 1.50” 47,000 lbs. 1.13” - 1.38” 1.25” - 1.70” 65,000 lbs. 1.38” - 1.92” 1.50” - 2.10”
28” 41” 58” 68” 90” 96”
Black Dark Green Red Dark Blue Yellow Aluminum
Feed Tubes Part #
www.linestar.ca
FTU1890 FTU1891 FTU1892 FTU1893 FTU1894 FTU1895
Rope Diameter Length
.25” - .65” .50” - .90” .75” - 1.10” 1.10” - 1.50” 1.25” - 1.70” 1.50” - 2.10”
28” 40” 52” 67” 83” 96”
For Use With Grip # Colour
ZCS1799 Black ZCS1800 Dark Green ZCS1801 Red ZCS1802 Dark Blue ZCS1803 Yellow ZCS1804 Aluminum
** The Application Load is 20% of the Approximate Breaking Strength based on a 5:1 safety factor.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
117
Multi Weave Grips - Revolving Eye
The revolving eye is an alternative to the flexible wire rope eye and is designed for heavy duty applications.
Approx. Break Cable Dia. Mesh Part # Strength ** Range Length Colour ZCS2177 7,000 lbs. .25” - .50” 31” Dark Green ZCS2178 10,500 lbs. .50” - .75” 45” Brown ZCS2179 14,100 lbs. .75” - 1.00” 43” Light Blue ZCS2180 25,000 lbs. 1.00” - 1.25” 65” Gold ZCS2181 31,000 lbs. 1.25” - 1.50” 59” Black ZCS2182 31,000 lbs. 1.50” - 1.75” 82” Red ZCS2183 49,000 lbs. 1.75” - 2.25” 82” Dark Blue ZCS2779 49,000 lbs. 2.00” - 2.50” 72” Yellow ZCS2780 49,000 lbs. 2.50” - 3.00” 72” Orange ZCS2781 49,000 lbs. 3.00” - 3.50 74” Aluminum ZCS2782 49,000 lbs. 3.50” - 4.00” 76” Light Green ** The Application Load is 20% of the Approximate Breaking Strength based on a 5:1 safety factor.
wire grips & swivels
Wire Mesh Grips & Line Swivels
Constructed from high grade stainless steel and the highest quality bearings available, these swivels are designed to easily pass through sheaves but should never go around bull wheels. All swivels come with a set of hex pins and a set of slotted pins and are stamped with a manufacturing lot number for traceability.
Ultimate Approx. Break Breaking Part # Strength ** Strength A ZSW2091 2,250 lbs. 6,750 lbs. 7/8” ZSW2092 3,500 lbs. 10,500 lbs. 1” ZSW2093 5,000 lbs. 15,000 lbs. 1-1/4” ZSW2094 7,000 lbs. 21,000 lbs. 1-3/8” ZSW2096 10,000 lbs. 30,000 lbs. 1-25/32” ZSW2097 15,000 lbs. 45,000 lbs. 2-3/32”
B C 3/8” 5/16” 7/16” 3/8” 9/16” 3/8” 9/16” 1/2” 45/64” 5/8” 25/32” 23/32”
D Weight 3-3/8” .37 lbs 4” .50 lbs. 4-15/16” 1 lbs. 5-3/16” 1.5 lbs. 6-3/16” 2.9 lbs. 7-5/16” 4.75 lbs.
Line swivels are not designed to run around bull wheels. Severe damage or injury may occur.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
* Safety Factor of 3:1
118
Line Swivels & Connectors
wire grips
Constructed with a thrust bearing for tensile load and a radial bearing for bending load. All sizes incorporate an oil seal and are made of stainless steel.
Safe Working Part # Load A
00505-010 00505-020 00505-025 00505-030 00505-035 00505-040
2,250 lbs. 5,000 lbs. 7,000 lbs. 10,000 lbs. 15,000 lbs. 30,000 lbs.
7/8” 1-1/4” 1-3/8” 1-5/8” 2” 2-3/8”
B C
D
Weight
3/8” 5/16” 17/32” 13/32” 9/16” 1/2” 11/16” 5/8” 25/32” 11/16” 1-1/32” 7/8”
3-3/8” 4-3/4” 5-1/8” 6” 7” 10”
.34 lbs 1.00 lbs. 1.40 lbs. 2.10 lbs. 3.80 lbs. 7.60 lbs.
* Safety Factor of 3:1 Line swivels are not designed to run around bull wheels. Severe damage or injury may occur.
Rope to Swivel Connectors
Non-Rotating Connectors
Used to connect pulling rope to above swivels. Both models have a maximum rope capacity of 7/8”. Safe Working Part # Load* Dia. Length
Commonly used to connect mesh grips to the pulling wire. The 2 smaller sizes have slotted pins while the larger sizes have hexagon pins.
Tongue
00522-025 7,000 lbs. 2” 5-5/16” 1/2” 00522-035 15,000 lbs. 2” 5-3/8” 21/32”
Safe Working Part # Load* Dia. Length
00520-010 2,500 lbs. 7/8” 2-1/8” 3/8” 00520-020 5,000 lbs. 1-1/4” 2-7/8” 17/32” 00520-027 9,000 lbs. 1-1/2” 3-3/8” 19/32” 00520-035 15,000 lbs. 2” 4-9/16” 25/32” * Safety Factor of 3:1
www.linestar.ca
00521-035 Rope to Rope Connector Maximum rope diameter 7/8”. Safe working load 15,000 lbs. 2” diameter by 5-1/2” length.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Tongue
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
119
Pre-Formed Galvanized Punch Type Clamps
CPC2875 Banding Tool
Band punching tool for 5/8” punch type clamps. Includes adapter for 3/8” bands.
Part #
Inside Band Clamps Diameter Width Per Carton
P-3 P-4 P-6 P-8
13/16” 1” 1-1/2” 2”
3/8” 5/8” 5/8” 5/8”
wire grips & swivels
Clamps & Banding
100 100 100 100
Open-End Galvanized Punch Type Clamps Part #
P-38 Clamp-Master Tool Set
A handy, low cost tool set for applying both 3/8” and 5/8” punch type clamps.
Inside Band Clamps Diameter Width Per Carton
PO-3 13/16” PO-311 1-3/8” PO-8 2” PO-10 2-1/2” PO-12 3”
3/8” 3/8” 5/8” 5/8” 5/8”
100 100 100 50 50
Standard-Duty Buckles Buckles Part # Width Per Carton
PB-203 PB-204 PB-205 PB-206
3/8” 1/2” 5/8” 3/4”
100 100 100 100
Standard-Duty Steel Banding Part #
Band Band Width Thickness
PB-203 PB-204 PB-205 PB-206
3/8” 1/2” 5/8” 3/4”
.025” .030” .030” .030”
PB-001 Banding Tool
Light & heavy duty banding & buckles are available.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Tensioning tool for steel banding and buckle application.
120
www.linestar.ca
wire grips & swivels
Synthetic rope
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
121
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
wire grips & swivels
Synthetic rope
wire grips & swivels
122
Synthetic Rope Unitrex XS Max Wear
Unitrex XS Max Wear is Uniline’s high tech cousin, which is a parallel cored rope of Honeywell’s Spectra, wrapped with a Neoprene tape and over braided with a tough jacket of high tenacity polyester. The result is a synthetic cable, somewhat stiffer than your usual rope, which is much like wire in its stretch characteristics. Unlike wire it is much lighter and easily handled. Due to its toughness we are comfortable assigning it a higher working load rating which is 25% of its breaking strength. Unitrex XS Max Wear has high strength retention in service which is supported by field studies and our long standing track record with Uniline polyester. Unitrex’s tough rubber layer protects its high modulus Spectra core and the outer jacket is saturated with Urethane making it the toughest UHMPE rope you can buy. All Linestar’s parallel core ropes are torque free, with bonded cores preventing contamination of the internal strength member. Unitrex XS can be quickly terminated and/ or joined with a TechEye™ or TechJoin™
Average Spliced Minimum Spliced Maximum Diameter Break Strength Break Strength Working Load 4:1 Inches mm Lbs. Kg. Lbs. Kg. Lbs. Kg.
Weight 100ft. 100m
0.44 0.53 0.58 0.63 0.71 0.84 1.00 1.15 1.25 1.42 1.75 1.94 1.99 2.20
6.7 9.2 11.4 13.5 16.9 24.2 32.4 42.4 52.5 64.4 92.6 98.8 113.3 144.0
(11) (14) (15) (16) (18) (21) (25) (29) (32) (36) (45) (49) (51) (56)
20,000 26,000 34,000 42,500 50,500 73,500 100,000 125,000 158,000 195,000 264,000 310,000 360,000 430,000
9,080 11,800 15,435 19,295 22,925 33,365 45,400 56,750 71,730 88,530 119,855 140,740 163,440 195,220
18,000 8,170 23,400 10,620 30,600 13,890 38,250 17,365 45,450 20,630 66,150 30,030 90,000 40,860 112,500 51,075 142,200 64,555 175,500 79,675 237,600 107,870 279,000 126,665 324,000 147,095 387,000 175,695
5,000 2,270 6,500 2,950 8,500 3,855 10,625 4,820 12,625 5,730 18,375 8,340 25,000 11,350 31,250 14,185 39,500 17,930 48,750 22,130 66,000 29,960 77,500 35,185 90,000 40,860 107,500 48,805
10.0 13.7 17 20.1 25.2 36.0 48.2 63.1 78.2 96.6 137.9 147.1 168.7 214.4
Energy Absorption
www.linestar.ca
The coloured area under the curve represents the rope’s ability to do “work” and is expressed in foot-pounds per pound of rope in tension.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
123
LIFTY BOARDTM device aids in the efficiency and safety with regard to maintenance work on open wire secondary and triplex (bundling). LIFTY BOARDTM device is especially useful when replacing utility poles. LIFTY BOARDTM device has been implemented in real life testing since June, 2012. LIFTY BOARDTM device has been Di Electrically Tested by Powertech Labs to withstand 46KV. LIFTY Technologies Inc has been working with RS Line to establish a proper safety standard for real life testing. RS Line is a well renowned independent line company based in Western Canada and provides services throughout the world.
24”
wire grips & swivels
lifty board
LIFTY BOARDTM device is PATENT PENDING tool that aids in the EFFICIENCY AND SAFETY with regard to maintenance work on open wire secondary and triplex (bundling). LIFTY BOARDTM device is especially useful when REPLACING UTILITY POLES. • Safe working load of 5 times the intended use. • Can be used in temperatures as low as -50 degrees. • Di electrically calculated to withstand 160,000 volts. This is over 6 times the normal maximum operating conditions. Dimensions: 6”W x 24”L x 3/4”D Weight: 2.12kg or 4.68 pounds
LIFTY BOARDTM HAS A SAFE WORKING LOAD OF 5 TIMES THE INTENDED USE
6” LIFTY BOARDTM device collects and carries all 3 conductors at one time • LIFTY BOARDTM device eliminates the need to carry each wire individually during pole replacement or general repair work • Only one crew member required in bucket – this frees up an additional crew member to work on other tasks • LIFTY BOARDTM device saves approximately 15 minutes to 1 hour per utility pole replacement; this is half the amount of time that it normally takes.* • In most circumstances, it is not necessary to de energize conductors therefore no need to alert consumers of power outages • LIFTY BOARDTM device can hold & raise open wire secondary AND midspans as a unit, without service interruptions
LIFTY BOARDTM device saves half the amount of time. Reduces Insurance and WCB Claims. This translates into direct savings because it increases efficiency and minimizes the lifting and handling of 3 conductors associated with Open Wire Secondary.
Reduces heavy strain by having LIFTY BOARDTM device carry the weight of each wire for your linemen. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
LIFTY BOARDTM device minimizes direct contact with live wires carrying secondary distribution voltage (240 volts) with potential risk of primary voltage of up to 25,000 volts.
stringing blocks
124
Universal Stringing Blocks A high-strength alloy frame gives these blocks a 2,500 lb safe working load. The throat opening is 3-3/4” high and 3-1/8” wide. The 3” wide by 7” diameter sheaves run on heavy duty shielded ball bearings. The blocks can be mounted to a crossarm an insulator bracket or suspended. Blocks with aluminum sheaves weigh 8-1/2 lbs. Blocks with ductile iron sheaves weigh 15-1/2 lbs.
CB-1 Universal Stringing Block with Aluminum Sheave
The spring loaded latch on the gate can be operated with a hot stick. The gate is held open by placing the ring on to the holding hook. When the ring is released, the heavy duty spring positively locks the gate closed. * Crossarm Brackets sold separately
Urethane Lined
Aluminum
For Aluminum Wire, OPGW & Fiber Optic Cable.
General Purpose For Most Stringing Applications.
1A-2A Insulator Bracket For mounting blocks to tie-top post insulators at differing angles. The rubber covered brackets firmly grip and adjust to different size insulators.
XA-1 Crossarm Bracket
www.linestar.ca
Fits crossarms up to 4-1/2” x 5-1/2”.
YBC30
Y-Ball Clevis
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
125
Universal Stringing Blocks
stringing blocks
XS-100B Blocks
Universal Distribution Stringing Block Single-Conductor Capacity • High strength, low weight. • Urethane, neoprene, polished--groove, nylatron, or ductile--iron sheaves. • 2,500 lb. maximum working load. • Positive locking handle (a secure spring-loaded latch and large-ID pull-loop) on the side-gate assembly for easy conductor clip-in and for hotstick operations. • High-effi ciency, low-friction. • Forever Warranty™
Fastrap™ Universal Cross-Arm Bracket
For Quickly Mounting XS-100B Blocks to Cross-Arms Single-Block Capacity • Requires less than half the time to mount/dismount compared to ordinary brackets. • No tools needed to mount or dismount. • Compatible with nearly all distributiontype blocks. • One model fi ts all cross-arm sizes Highest holding force, without damage, regardless of materials • Forever Warranty™
XS-200B Blocks
Universal Distribution Stringing Block Single-Conductor Capacity • 2-sheave design. • May be suspended or bracket-mounted to cross-arms up to 5 in. x 6 in. •Urethane- or Neoprene-lined, or polishedgroove, Nylatron, or ductile-iron sheaves. • 2,500 lb. maximum working load. • High-effi ciency, low-friction. • Forever Warranty™
5903
Universal Stringing Rollers An infinite angle roller with adapters and fittings for a wide variety of conductor stringing applications. Materials are lightweight, high strength 356-T6 aluminum alloy with stainless steel or cadmium plated steel parts. Sheaves are mounted on double-shielded, liftime lubricated, maintenancefree ball bearings. Weight is 8 lbs.
XS-707 Blocks
Universal Distribution Stringing Block Single-Conductor Capacity
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
• 8 in. and 10 in. sheaves. • 2,500 lb. and 3,000 lb. max. working load, respectively. • Polished-groove and urethane-lined sheaves. • May be clamp-mounted or mounted using chain tightners. • Matching 3-conductor RB-707-3 and RB-703-4 Running Boards available. • Available with Fastrap™ Cross Arm Bracket • Forever Warranty™
stringing blocks
126
Stringing Blocks 73 Series
Single Conductor Blocks Ideal choice for reconductoring mid-size diameter conductor, especially when old conductor is used to pull in new conductor. In addition to being available with 10”, 12”, 14”, and 16” (OD) sheaves, they have an extralarge throat, and do not have a conductor guard. This design permits easy passage of connections between conductors and pulling lines, compression joints, swivels, and/or splices in the pulling line.
70 & 72 Series Bundle Blocks
74 Series
Single Conductor Blocks Ideal choice for stringing large-diameter transmission-class conductor. These blocks are available with 10”, 12”, 14”, and 16” (OD) sheaves, and they are lightweight, yet exceptionally rugged, reliable, and durable. Their low-friction bearings render high block efficiency, which helps to maximize stringing distances while minimizing pulling tensions and reducing loads on stringing equipment.
Available in two, three, four, and sixconductor configurations per phase, with or without separate pulling-line sheave. The 70 Series blocks have rigid frames made of hot-dipped galvanized steel, available in three designs: symmetrical, slim line or off set. Bundle blocks are ideal when the versatility of field reconfiguration of the blocks is desired for meeting the demands of changing stringing needs and conditions.
78 Series
Single Conductor Blocks
www.linestar.ca
Ideal choice for stringing large-diameter transmission-class conductor. These blocks are available with 20”, 22”, 28”, 35”, and 42” (OD) sheaves, and they are light-weight, yet exceptionally rugged, reliable, and durable. Their low-friction bearings render high block efficiency, which helps to maximize stringing distances while minimizing pulling tensions and reducing loads on stringing equipment.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
Hold Down Blocks • Available in ductile iron or steel frame. • Two 7” or 14” sheaves lined with Neoprene or Urethane.
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
127
Stringing Blocks
Single Robust Design Options to Suit Conductor & Conditions Polished-groove sheaves are made entirely of (virgin) A356-T6 Aluminum, which is the same material used for 72 Series, 73 Series, 74 Series, and 78 Series block frames, and which renders high-strength with light weight. The use of virgin materials and the manufacturing process together help assure that the sheaves are uniformly dense, with controlled impurities, and without voids, which help assure long life and help assure against sudden failure.
stringing blocks
Polished-Groove Aluminum
Polished-groove sheaves are very durable and are easy on common conductors. Consequently, bocks with polished-groove sheaves make a good choice for stringing common conductors under typical, non-energized conditions.
Urethane Lining on Aluminum
Single Robust Design Options to Suit Conductor & Conditions Urethane-lined aluminum sheaves are made identically to polished-groove sheaves (above) except that a premium-grade polyurethane lining is cast-in-place on the sheaves’ conductorcontact surface. The properties of the urethane and casting it in place on the bare sheave together assure a high-precision profi le of the lined sheave. The urethane’s formulation assures resiliency to cushion conductors, as well as assures hardness, high load-bearing capacity, impact resistance, abrasion resistance, resistance to compression-set, and resistance to oil, ozone, and other environmentals – all of which contribute to long useful life, even under harsh field conditions. A-scale durometer hardness of the lining is 90-92. Blocks with urethane-lined sheaves are especially appropriate for stringing conductor, static wire, and fiber optic cables.
Neoprene Lining on Aluminum
Single Robust Design Options to Suit Conductor & Conditions neoprene-lined aluminum sheaves are made identically to polishedgroove aluminum sheaves except that a semi-conductive neoprene lining is applied to the sheaves’ conductor-contact surface. The neoprene is vulcanized and post-cured to assure consistency and uniformity. In addition to its conductive properties and acting as a cushion for the conductor, neoprene lining has high abrasion resistance and durability. A-scale durometer hardness of the lining is 70-72.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Blocks with neoprene-lined sheaves help to conduct potentially harmful voltages/currents to ground during stringing operations. Blocks with neoprene-lined sheaves are, consequently, especially appropriate for stringing in energized environments or in any environment where there is potential for induced or contact voltages/currents.
stringing blocks
128
Determining Sheave Sizing The sheave dimensions below apply to all Sherman & Reilly transmission sheaves of the Series and types indicated. These sheaves are used on the indicated single-conductor blocks, as well as on bundle blocks and specialty blocks.
www.linestar.ca
Specifications subject to change without notice
1. 2. 3. 4. 5. 6.
This number must be calculated per the conditions under which the conductor will be strung. Excluding ball-bearings. Polished groove. Urethane or Neoprene. As required and engineered. Not Available. These sheaves are available only as lined sheaves, either urethane or Neoprene.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
129
Grounded Stringing Blocks
• • • •
Aluminum alloy or ductile iron rollers. Block Grounds are available for most S+R blocks. Equipped with grounding studs. Arm and rollers can be rotated to facilitate stringing in either direction.
The Sherman + Reilly Block Grounds provide direct and continuous grounding between conductor or pulling line and tower, counterpoise system, etc. Swivels, splices, sleeves and grips pass easily; the arm and rollers can be rotated to facilitate stringing in either direction.
stringing blocks
Block Grounds
The spring action rollers works underneath the wire preventing the block from swaying. Pressure is constantly applied to the conductor or pulling line, provided the lead-off angle is below the horizontal. Constant contact with the wire maintains voltage drain to enhance safer working conditions.
Bundle Block Grounds • Aluminum alloy or ductile iron rollers. • Block Grounds are available for most S+R blocks. • Constant contact with the wire maintains voltage drain to enhance safer working conditions. • Spring action rollers work underneath the wire preventing the block from swaying. On all bundle blocks used to string more than two conductors, our grounds operate on a patented eccentric design, unique to S+R, to make sure the grounding rollers are always in contact with the conductors at minimum of approx 40 lbs. of force for a positive grounding eff ect. It also allows for diff erence in sag between the conductors in the adjacent spans. This is most important as multiple conductors during stringing installations do not stay in the same exact plane at all times and could create a safety hazard if contact with the conductor is lost should a fault current occur. S+R block grounds are also designed to work with our running boards when stringing bundled conductors.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
stringing blocks
130
Pole Boss Conductor Stringing System A lightweight and compact hydraulic pulling system that is ideal for the installation of distribution conductors and can also be used as a pilot rope pulling system. This system can be powered from the hydraulic circuit of a line truck or by a potrable hydraulic power unit.
Pulling Rope Made of a 12-strand polyester, this 3/8” diameter rope is supplied in 3,000’ lengths. Order rope and storage reels separately. SAM-826-3/8 Green Rope Only SAM-826-3/8 Blue Rope Only SAM-826-3/8 Orange Rope Only SAM-826-3/8 Yellow Rope Only 543251 Steel Reel Only Weight of reel & rope is 119 lbs.
8000816 Payout Spindle This unit has an adjustable disc brake that can be operated with a hotstick. It is mounted to the pole with a chain binder. Made of galvanized steel, it weighs 35 lbs.
Drive Unit
562052 Replacement Chain Assembly
www.linestar.ca
Pulls 1,000 lbs at 400 fpm with a supply of 15 gpm at 2,000 psi. Features an Anti-Roll Back Pin to prevent backlash. Supplied with 2 ratchet straps and 2 hoses with quick disconnect couplers. Weighs 215 lbs.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Payout spindles are also available with nylon straps
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
131
Traveling Grounds & Accessories
TG250-1625 Traveling Ground With aluminum rollers and a wire capacity of .250” to 1.625”. Weighs 4-3/4 lbs.
stringing blocks
An important component of every conductor stringing project, traveling grounds maintain a positive contact from conductor to ground through the use of a ground wire. All models have a reversible ground stud which accomodates almost any type of ground clamp. All models have an adjustable, spring loaded center roller to maintain the correct pressure on the conductor.
TG250-1625S Traveling Ground With Steel Rollers.
TG75-2HD Traveling Ground
With aluminum rollers and a wire capacity 3/4” to 2”. Weighs 10-1/2 lbs.
TG75-2HDS Traveling Ground With Steel Rollers.
TG550 Traveling Ground
Has three 5-1/2” aluminum rollers and a wire range of T2 4/O through 477. Weighs 62 lbs.
Large Capacity Traveling Grounds
The TG550 and TG80 were designed and engineered specifically for T2 wire. The sheave radius allows the T2 wire to move through the traveling ground without causing damage or milking of the wire. The two bottom rollers on each model prevent the traveling ground from jumping off of the wire during the pull.
TG80 Traveling Ground
Has three 8” aluminum rollers and a wire range of T2 795 through 1113. Weighs 92 lbs.
353 Traveling Ground
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Conductor capacity of 795MCM through 2-1/2”. The torsion spring permits passage of splices and swivels. Comes standard with aluminum rollers but steel rollers are also availble. Total weight is 18 lbs.
stringing blocks
132
traveling grounds & accessories 336A Traveling Ground
1590C Traveling Ground
The Bashlin 336A traveling ground reduces the possibility of electric shock due to accidental contact with energized conductors during stringing operations. They are heavy duty units designed for conductors measuring up to and including 336MCM.
The Bashlin 1590C traveling ground reduces the possibility of electric shock due to accidental contact with energized conductors during stringing operations. They are heavy duty units designed for conductors measuring up to and including 1590MCM.
GR43BS2 43 kA Rotating Ground
Designed to provide a continuous ground as conductor is pulled from a reel. The tool is mounted on the arbor shaft adjacent to the reel of conductor. A ground conductor is attached to the nonrotating collar then to a suitable ground provision. The tail of the conductor is then attached to the rotating stud.
Tower Safety Equipment 108-500 - Tower Rescue Kit This versatile high angle rescue kit contains all components necessary to safely perform ground and structure based rescues as well as self rescue. This kit is easily adaptable for the different rescue situations and techniques needed while working on lattice towers or other structures. Kit includes: • 500 feet of 7/16” abrasion resistant static rope with stitched eyes and metal thimbles on each end (Model 39S1Q1-400) • Unique Tie Back Anchor Sling (Model 3902-4) • Man rated Pulleys (Model RP104 & RP110) • 3 ANSI rated steel carabineers (Model 5005T) • 2 Endless Loop Slings (Model 3905E-36) • Prusik loop with an aluminum ring (Model 705A1-35) • Versatile rope Descender for self rescue or assisted rescue that incorporates an anti-panic feature and can also be used to belay, set up as a reversible haul system, and do short ascents (Model 50043S) • Storage bag marked “RESCUE ONLY” for easy identification (Model 4569Q6-200)
www.linestar.ca
30342 - Big BuckSnap™
The Big BuckSnap™ now features a larger opening that allows the user to easily connect over 4” angle iron. New design also allows for ease of detachment. A radiused (rounded) inner edge is designed to prevent damage to conductors when used in hot work applications. It also has a radiused attachment eye to prevent damage to aluminum connectors. Meets ANSI Z359.12 specification. 3600lb. gate load requirement.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
133 sagging equipment
Sagging Equipment SW-E Sagwatch
Used to accurately determine sag simply and rapidly. Water & shock resistant, it is antimagnetic and housed in a stainless steel case. Scale Capacity Graduations
3rd Return 5th Return Seconds
Sag up to 36 Feet Feet & Decimals Sag up to 100 Feet Feet & Decimals Seconds up to 30 Tenth of a second
S22-771 Clipping Hook 6,500 lb Safe Working Load. CAN BE The S22-771 can be Load Tested and Serialized Prior To Shipment
21412-2J Pocket Thermometer This thermometer has a range from -50o to 120o F.
724 Sag Scope The “Double Bubble” feature allows for vertical & horizontal leveling. The 3 x 9 power scope with cross hairs mounts easily to either wooden poles or steel structures. Kit includes a padded, high-impact storage case.
CT40-160 Sagometer
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
An accurate thermometer encased in a section of aluminum conductor. This helps determine the temperature of the conductor being sagged. Range is -40o to 160o F.
134 sagging equipment
dynamometers Analog Dynamometers
Accurately displays weight in any direction within 1/2% of full scale. Shackles and cases are included. Capacity Part # Division (lbs)
Capacity Part # Division (lbs)
30006-0035 30006-0050 30006-0084 30006-0100
30007-0109 30784-0017 30784-0025 30784-0033
2,000 x 20 5,000 x 50 10,000 x 100 20,000 x 200
20,000 30,000 40,000 50,000
x x x x
100 200 200 200
Dynamometers
• Compact, light weight, and lower price for line work • Calibrated with computer control tension machine No. Capacity Graduation A B C 16-TM5 1,100 LBS 0.1 kn 15.45 cm 7.6 cm 8.9 cm 16-TM1000 1,100 LBS 100 LBS 6-1/16” 3” 3-1/2” 16-TM10 2,200 LBS 0.2 kn 19.05cm 7.62cm 8.89cm 16-TM2000 2,200 LBS 100 LBS 7-1/2” 3” 3-1/2” 16-TM20 4,400 LBS. 0.5 kn 19.05cm 7.62cm 8.89cm 16-TM4000 4,400 LBS 100 LBS 7-1/2” 3” 3-1/2” 16-TM30 6,600 LBS 0.5 kn 24.13cm 7.62cm 3.49cm 16-TM6000 6,600 LBS 100 LBS 9-1/2” 3” 3-3/4” 16-TM50 11,000 LBS 1 kn 24.76cm 8.9cm 3.49cm 16-TM10000 11,000 LBS 100 LBS 9-3/4” 3-1/2” 1-3/8” 16-TM100 22,000 LBS 2 kn 34.92cm 10.79cm 5.08cm 16-TM20000 22,000 LBS 100 LBS 13-3/4” 4-1/4” 2”
D Weight 5.4 cm 2 LBS 2-5/32” 2 LBS 2.54cm 1 KG 1 2.2 LBS 2.54cm 1.09 KGS 1” 2.4 LBS 3.49cm 1.9 KGS 1-3/8” 4.2 LBS 3.49cm 2.58 KGS 1-3/8” 5.7 LBS 5.08cm 6 KGS 2” 13.2 LBS
Electronic Dynamometers
Its LCD displays 1” high digits and has an accuracy of 0.2% of capacity. Supplied with shackles.
www.linestar.ca
Capacity Carrying Part # Resolution (lbs) Case
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
AWT05-506317 AWT05-506318 AWT05-506319 AWT05-506320
2,500 5,000 10,000 25,000
403-243-1900 604-594-2701 204-783-9771 905-564-5344
[email protected] [email protected] [email protected] [email protected]
• • • •
x x x x
2 Included 5 Included 10 36244-0034 20 36244-0042
100%
Canadian Owned
135 pullers & tensioners
Pullers and Tensioners
U7500 Bullwheel Puller Puller for Underground Installation 7,500 lb. Pulling Capacity • Hydraulically-driven twin bullwheels. • Safe-Zone Cab™ for the operator. • Hydraulic extendable boom w/170º swing arc. • Joystick control, electronic display & boom camera. • Electronic footage counter, tensiometer and data logger. The Series U7500 is a bullwheel puller for the installation of underground distribution conductor. The single platform, modular design provides 7,500 lbs. pulling capacity offering plenty of power to handle most installations. The hydraulically driven twin capstan bullwheels ensure smooth, well controlled pulls. Powered by a 35 hp 4-cylinder diesel engine, the transmission has two forward speeds and a reverse demand payout. The U7500 has plenty of power as well as flexibility to deal with varying needs during an underground pull. A joystick-controlled, hydraulically positioned extendable boom with 170°of swing arc is available for reaching into and pulling from pad-mounted transformers and other tight openings. With state of the art design to ensure operator safety, the U7500 features a Safe-Zone Cab™. This enclosure is designed to keep an operator off the ground while the equipment is in use. Built with a fully adjustable, ergonomic seat and a digital touch display for all machine operations, diagnostics, and pull status. The Safe-Zone™ Cab is designed to reduce operator fatigue thereby reducing errors and injuries in the field. Equipped with a digital electronic load recorder for documenting pulling tensions and an electronic footage counter providing accurate, and continuous measurement of conductor/ cable deployed. Optional on-board air compressor.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
pullers & tensioners
136
Pullers and Tensioners HPLW-2004 Puller
4-Drum Rotating-Turret Puller 2000 lb. Pulling Capacity • 360° powered turret rotation range. • 6,000 ft. capacity for 3/8 in. rope. • Waterfall design for concurrent deployment of 4 lines. • ACG - Advanced Control Group. • Revolution Series • Safe-Zone™ Cab
The Sherman + Reilly HPLW-2004 is a compact 4-drum puller, providing high capacity in a configuration that is easy to tow and maneuver into tight spaces. The drum deck is hydraulically operated and may be rotated through a full 360° range. It may be locked at virtually any position, enabling the operator to easily and safely align the pull without having to re-position the trailer, thereby saving time and reducing the risk of line damage and delays caused by misalignment.
www.linestar.ca
Capable of a maximum 2,000 lb. line-pull at the top of each drum, enabling long pulls using a single machine at one fi xed site. Each drum is equipped with an Al-bronze disc-caliper pay out brake, enabling safe well-controlled rope payout and facilitating diminished risk of damage to lines and delay. The Safe Zone Cab™ is mounted to and rotates with the drum deck ensuring the operator is off the ground at all times during operation. All controls function from the control panel within the protection of the cab. The trailer is equipped with four (4) independent telescoping fully hydraulic outriggers. It also has two (2) independent hydraulically controlled levelwinds, which facilitate even distribution of lines and well -controlled pulling tension. the HPLW-2004 also features hard plumbe hydraulics with swivel fittings for improved reliability and eliminating the need to disconnect hoses for travel. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
137
jumper cable & assemblies
Approx. Ampacity Rating
15 kV Insulated Jumper Cable
Approx. Weight per 1,000 Feet
Approx. Approx. Approx. Cable Conductor Ampacity Weight per Part # Size Diameter Rating 1,000 Feet
12198 12199 12200 12201
#2 1/O 2/O 4/O
0.320” 0.403” 0.456” 0.592”
200 250 300 400
440 lbs. 600 lbs. 710 lbs. 1,050 lbs.
jumping equipment JUMPER CABLE & ASSEMBLIES
Approx. Conductor Diameter
This cable stays extremely flexible even at very low temperatures. The EPR jacket resists abrasion, oil, moisture and ozone.
Cable Size
440 lbs. 600 lbs. 710 lbs. 1,050 lbs.
750 lbs.
Approx. Weight per 1,000 Feet
15 kV Insulated Jumper Cable
Part #
200 250 300 400
300
Approx. Ampacity Rating
0.320” 0.403” 0.456” 0.592”
.456
Approx. Conductor Diameter
#2 1/O 2/O 4/O
Cable Size
12198 12199 12200 12201
2/O
Approx. Weight per
25 kV Insulated Jumper Cable
Part #
Approx. Ampacity
6874
Approx. Conductor
35 kV Insulated Jumper Cable
Cable
This cable stay extremely flexible even at very low temperatures. The EPR jacket resists abrasion, oil, moisture and ozone.
25 kV Insulated Jumper Cable Approx. Approx. Approx. Cable Conductor Ampacity Weight per Part # Size Diameter Rating 1,000 Feet
6874
2/O
.456
300
750 lbs.
35 kV Insulated Jumper Cable Approx. Approx. Approx. Cable Conductor Ampacity Weight per Part # Size Diameter Rating 1,000 Feet
6859
1/O
.403
250
950 lbs.
Jumper sets can be made with a specific wire size, to any length using any of the clamps pictured on page 139 and with jumper cable of any rating. All sets include heat shrink tubing over each connection and a dated test label with a unique serial number.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Custom Jumpers Available
jumping equipment
138
loadbreak & load pickup tools C403-1631 Load-Pickup Tool
Installed on one end of a jumper assembly, this tool can pickup loads and carry 250 Amps at 15 kV. The spring loaded contacts are closed by pulling on the insulated lanyard. The contacts cannot be recocked unless the tool is removed from the conductor. This tool cannot be used as a load-break tool.
“Jack Jumpers”
These tools permit a safe and quick method to bypass standard overhead cutouts without the use of bulky jumper cables. One end is placed on the arcing horn of the cutout and the other to the cradle end of the cutout establishing the bypass. Rated for 100 amps and for standard cutouts.
Cutout Max. Part # Rating Strength USJJ-001 15kV 9-1/2” USJJ-002 27kV 14-1/2” For soft carrying case, add “S” to the part #
Break Safe Load Break and Load Pick Up Tools The BREAK-SAFE® is a jumper clamp that functions like a portable switch. It is designed to operate on overhead distribution lines in conjunction with a mechanical jumper. The BREAK-SAFE® has three operating functions: • LOAD BREAK • LOAD PICKUP • CONTINUOUS CURRENT DUTY The BREAK-SAFE® is available with either a Floating or a Duckbill Head and comes in three models: • 15 kV / 300 amp • 27 kV / 300 amp • 46 kV / 200 amp SAFETY In order to keep personnel at a safe distance, the BREAK-SAFE® is operated with an insulated fiberglass hot stick for load break and load pick-up functions.
www.linestar.ca
The Yellow Safety Lock is operated by a hot stick and helps prevent the tool from an unintended load break or pickup operation. OPTIONS There are two case options to keep the BREAK-SAFE® protected during transport and storage. The new Hard Case is lockable and water tight.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
BREAK-SAFE® BREAK-SAFE® BREAK-SAFE® USBS-15 USBS-27 USBS-46
OPERATIONAL 15kV 27kV VOLTAGE LOAD BREAK 300 AMP 300 AMP RATING LOAD PICKUP 300 AMP 300 AMP RATING CONTINUOUS 300 AMP 300 AMP CURRENT RATING CONDUCTOR #6 COPPER MIN. #6 COPPER MIN. SIZE up to 954 ACSR up to 954 ACSR (1.1” dia.) MAX. (1.1” dia.) MAX. WEIGHT 7 lb. 1 oz. 7 lb. 14 oz. DIMENSIONS 27” long x approx. 31” long x approx. 2.5” dia. 2.5” dia.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
46kV 200 AMP 200 AMP 200 AMP #6 COPPER MIN. up to 954 ACSR (1.1” dia.) MAX. 10 lb. 1 oz. 39” long x approx. 2.5” dia.
100%
Canadian Owned
139
LOAD-RANGER® XLT Load Break Tool
Weighing under 5 pounds, the XLT line of Load Break Tools are by far the lightest portable load break tools available in the world. The XLT-1 is approximately 1lb 3oz lighter than the competition. Tool weight becomes extremely important when the tool is attached to the end of an extended fiberglass operating stick. The lighter the better for optimum tool control and minimal operator fatigue.
USLR-XLT-1 27 kV RATED - 900 AMP
SAFE The Utility Solutions XLT product line has the highest measured metal-to-metal clearance of any load break tool. This greatly reduces flash over potential during operation.
jumping equipment
loadbreak & load pick up tools
USLR-XLT-2 27 kV - 38 kV RATED - 900 AMP
EASY The XLT line was designed to be user friendly and simple to operate. It incorporates an optional counter and a unique reset button located on the side which allows full tool reset without glove removal. This results in NO MORE PINCHED FINGERS. Spare parts are readily available and inspection and maintenance procedures are easy to follow.
XLT Load Break Tools
Weighing only 4.2 lbs it measures 16” long and 6-1/4” wide. The high metal-to-metal clearance minimizes flashover potential. The side located reset button allows for full reset of the tool without glove removal. The longer stroke easily accomodates 25 kV cutouts. These models are also available with operational counters. Specify when ordering. Load Break Rating: 600 Amps nominal, 900 Amps max.
usLrXLT-1-XX 27 kV usLrXLT-2-XX 38 kV For hard carrying case, add “H” to the part #. For soft carrying case, add “S” to the part #. For URD Hood ,add “E” to the part #.
loadbreak ACCESSORIES OPTIONS
The XLT line is offered with numerous options including a Pad Mount version, hard case, soft case, extended insulated hood, and an economical non-counter version.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
add “S” for Soft Case
add “E” for Extended Hood
add “NC” for No Counter
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
The Pad Mount option “P” uses a uniquely designed operating arm that creates a lower profile to provide maximum clearance for the tight confines in pad gear. This option also comes standard with an extended insulated hood.
add “H” for Hard Case
jumping equipment
140
loadbreak & load pick up tools Temporary Cutout Tools Provides fuse protection during live-line maintenance. The tool is clamped to the conductor, the bronze stud accepts a temporary tap jumper and is operated by a loadbreak tool. 100 Amps continuous current.
Interrupt Part # Rating Capacity Weight PSC601-0341 15kV 10,000 Amps 6 lbs. PSC601-0342 27kV 8,000 Amps 9 lbs.
C400-1907 Tension Puller Switching Tool This tool permits a live overhead distribution line to be cut preventing service interruption while the cutting and work is being performed and can be applied wherever a disconnect switch is needed for temporary sectionalizing. It is properly rated for line tension, continuous current, BIL and voltage. Wire grips are attached to the ends of the tool and to the conductor. The ratchet wrench draws the ends together reducing the tension of the wire between the hooks. Hot-line jumpers are installed on the conductor and the tool’s bypass studs. Once cut, the tail of the conductor can be clamped back onto itself. Use only a properly rated loadbreak tool to operate the disconnect switch.
www.linestar.ca
PSC6010347 -- Tool, 15Kv Temp. Load Disconnect
This tool provides a temporary means of connecting and disconnecting equipment or circuits under load conditions. This tool design does not have a fuse and does not provide protection for fault or overcurrent conditions. Hot parts are identical to Chance Type C cutouts, including the tubular-copper disconnect blade. The tool simply clamps onto primary conductor with a Grip-All clampstick. Brass stud at lower end accepts clamp on temporary tap jumper. An arc-chute-type interrupter gives the tool its excellent loadbreak capability. To interrupt load currents, the device makes use of a stainlesssteel auxiliary blade within a Delrin® arc chute. This self-contained loadbreak device operates by a simple disconnect stick. No special or portable tools are required to operate the unit. To break the current, just insert a disconnect stick into the operating ring and rapidly open the device. In the process of opening, the spring-loaded auxiliary blade snaps out through the arc chute to elongate, cool and extinguish the confined arc. This loadbreaking operation is independent of the disconnect stick speed. To provide a clearly visible break, the disconnect blade hangs in approximately a vertical position.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
141
T600-0658
Part # T600-0658 C600-2255 C600-2256 C600-2281 C600-2282 C600-1743
C600-2255
grounding equipment
c-type ground clamps
C600-1743
C600-2282
Jaw Ferrule Main Line Main Line Continuous Type Type Minimum Maximum Current Smooth Pressure 0.162” 2” O.D. Bus 400 Amps Smooth Pressure 0.162” 2” O.D. Bus 400 Amps Serrated Pressure 0.162” 2” O.D. Bus 400 Amps Smooth Pressure 0.162” 2” O.D. Bus 400 Amps Serrated Pressure 0.162” 2” O.D. Bus 400 Amps Smooth Pressure 0.162” 1.50” ACSR 400 Amps
Fault Current 15 Cylces 43,000 Amps 43,000 Amps 43,000 Amps 43,000 Amps 43,000 Amps 43,000 Amps
Fault Current 30 Cycles 30,000 Amps 30,000 Amps 30,000 Amps 30,000 Amps 30,000 Amps 30,000 Amps
Duckbill Grounding Clamps
C600-0434
C600-1734
Fault Current Fault Current 15 Cylces 30 Cycles 43,000 Amps 30,000 Amps 43,000 Amps 30,000 Amps 43,000 Amps 30,000 Amps.
More Ground Clamps are available • Please contact us for more info Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Jaw Ferrule Main Line Main Line Continuous Part # Type Type Minimum Maximum Current C600-0197 Serrated Threaded 0.162” 1.506” ACSR 400 Amps C600-1734 Smooth Threaded 0.162” 1.162” ACSR 400 Amps G3622-1 Smooth Pressure 0.162” 1.162” ACSR 400 Amps
G3622-1
grounding equipment
142
Specialty Grounding Clamps T600-2364 Long Ball Stud
Apparatus Grounding Clamps
Bronze clamps used in restricted-space applications and as part of a truck grounding system. They have a high-current rating of 43,000 amps for 15 cycles and 30,000 amps for 30 cycles.
The 3” shank accepts most types of ground clamps. Overall length is 7”.
Part # C600-2100 C600-2101 C600-2300 T600-2320
C600-2102 Standard Ball Stud 4-1/4” overall length.
Terminal Ferrule Handle Type Type Type Drilled Threaded Shotgun Eye Tapped Threaded Shotgun Eye Pressure Pressure Shotgun Eye Tapped Threaded T-Handle T600-0466 C-Type Clamp
G33634SJ Flat Face Clamp
The smooth jaws of this bronze body clamp accepts up to 477 ACSR (0.814”). It has a shotgun eye handle and uses threaded ferrules. The fault current ratings are 21,500 amps for 15 cycles & 15,000 amps for 30 cycles.
This aluminum body clamp has serrated jaws and accomodates up to 1-1/2” angles and flats. It accepts pressure type ferrules and has fault current ratings of 27,000 amps for 15 cycles and 20,000 amps for 30 cycles.
C600-2232 Tower Clamp
G3369 Bus-Bar Clamp
A bronze body clamp with flat serrated jaws that have a 1-1/2” capacity. It has a drilled terminal to accept threaded ferrules. The fault current rating is 43,000 amps for 15 cycles and 30,000 amps for 30 cycles.
This aluminum clamp fits on square bus up to 4”x4” and round bus up to 4-1/2”and accepts pressure type ferrules. Fault current rating of 43,000 amps for 15 cycles and 30,000 amps for 30 cycles.
C600-2231 Tower Clamp with a T-Handle.
www.linestar.ca
21703 Multi-Purpose Ground Clamp and Ball Studs
• C Head upper jaw is designed for use on conductors. Slotted “V” also allows the ground clamp to be attached to the ball stud(s) shown. • Both sides of the clamp are drilled and tapped to attach ball studs for use as hanger studs. Drilled and tapped holes are 1/2”-13 and can also be utilized as lubrication prots.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
143
Shrouded Threaded Copper Ferrules Part # C600-2622 C600-2623 C600-2624 C600-2625
Shrouded Plain Copper Ferrules
Cable Burndy Burndy Size Die “A” Die “B” #2 U165 U166 1/O U165 U168 2/O U165 UL 4/O U166 UL
Part # C600-2630 C600-2631 C600-2632 C600-2633
Unshrouded Threaded Copper Ferrules
Unshrouded Plain Copper Ferrules
Cable Burndy Part # Size Die C600-2606 #2 U165 C600-2607 1/O U165 C600-2608 2/O U165 C600-2609 4/O U166
Cable Burndy Part # Size Die C600-2614 #2 U165 C600-2615 1/O U165 C600-2616 2/O U165 C600-2617 4/O U166
Shrouded Threaded Aluminum Ferrules Part # C600-2618 C600-2619 C600-2620 C600-2621
Shrouded Plain Aluminum Ferrules
Cable Burndy Burndy Size Die “A” Die “B” #2 U165 U166 1/O U165 U168 2/O U165 UL 4/O U249 UL
Part # C600-2626 C600-2627 C600-2628 C600-2629
Unshrouded Threaded Aluminum Ferrules Part # C600-2602 C600-2603 C600-2604 C600-2605
Cable Burndy Burndy Size Die “A” Die “B” #2 U165 U166 1/O U165 U168 2/O U165 UL 4/O U166 UL
Cable Burndy Burndy Size Die “A” Die “B” #2 U165 U166 1/O U165 U168 2/O U165 UL 4/O U249 UL
Unshrouded Plain Aluminum Ferrules
Cable Burndy Size Die #2 U165 1/O U165 2/O U165 4/O U249
Part # C600-2610 C600-2611 C600-2612 C600-2613
Cable Burndy Size Die #2 U165 1/O U165 2/O U165 4/O U249
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
TEBSTS-5 5” Heat Shrink Tube TEBSTS-8 8” Heat Shrink Tube Alberta: British Columbia: Manitoba: Ontario:
grounding equipment
grounding ferrules
grounding equipment
144
grounding ferrules Grounding Cable Ferrules
All Hastings ferrules are tin plated copper. Provides added protection against corrosion. Ferrules for Bolted Type Terminals Part # Size AWG lbs 11656 #2 0.1 11657 1/O 0.1 11658 2/O 0.1 11660 4/O 0.1
Ferrules for Threated Type Terminals, 5/8-11 NC Part # Size AWG lbs 12998 #2 0.3 12999 1/O 0.3 13000 2/O 0.3 13001 4/O 0.4 PS50349 5” heat shrink 0.1
Ferrules for CompressionBolted Type Terminals Part # Size AWG lbs P30244 #2 0.3 P30245 1/O 0.4 P30246 2/O 0.4 P30247 4/O 0.5
Ferrules for Elbows - URD Part # Size AWG lbs P30916 1/O 0.4 P30917 2/O 0.5
Clear Jacketed Copper Grounding Cable
Approx. Cable Conductor Part # Size Diameter CGC2 #2 .326” CG1/0 1/O .443” CG2/0 2/O .491” CG4/0 4/O .619”
The clear jacket allows for visual inspection of the conductor under the insulation. Extremely flexible at temperatures ranging from -25o C to 90o C. Meets ASTM B-3 & F-855 specifications.
# of Strands 665 1050 1323 2107
Yellow Jacketed Copper Grounding Cable
Approx. Cable Conductor Part # Size Diameter YGC2 #2 .370” YGC1/0 1/O .480” YGC2/0 2/O .520” YGC4/0 4/O .640”
www.linestar.ca
The standard yellow jacket is made of neoprene that is easy to strip and resists abrasion and compression cutting. This cable stays flexible at temperatures to -40o C and has a 600 volt rating. Orange Jacket Ground Cable also available
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
# of Strands 665 1045 1330 2109
100%
Canadian Owned
145
Single-Phase Elbow Grounding Sets
Made with 6 feet of 1/O yellow jacketed cable and a bronze body C-Type ground clamp on one end and an elbow on the other end.
C6000729 15kV Elbow Grounding Set T6002131 25/35kV Elbow Grounding Set
grounding equipment
specialty ground sets
C600-3097
15kV Grounding Elbow
C600-3098
25/35kV Grounding Elbow
C600-3099
35kV Grounding Elbow
Grounded Parking Bushing Sets
Three-Phase Elbow Grounding Sets
T600-3091
C6003102
A loadbreak bushing on one end and bronze body clamp on the other end of a 4 foot length of 1/O yellow jacketed cable.
15kV Grounded Parking Bushing Set
15kV 3-Phase Elbow Grounding Set
T600-3092
25/35kV Grounded Parking Bushing Set
phone: phone: phone: phone:
C6003103
25/35kV 3-Phase Elbow Grounding Set
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
Three 6’ lengths of 1/O yellow jacketed cable connected to a single C-Type bronze body ground clamp with elbows on the other ends.
grounding equipment
146
specialty grounding Custom Made Overhead Distribution Grounding Sets
LineStar offers custom ground sets in a range of sizes and lengths. Yellow, Orange or Clear flexible grounding cable can be used. We have standard and threaded ferrules available and we supply all our custom grounds with shrink tubing which offers excellent connection and strain relief properties. LineStar offers repair, cleaning, testing, and certification programs to meet individual customer requirements for new and used grounds.
2181 Ground Set Bag
Yellow Vinyl, Handles Wrap Around Bag. Zipper Opening, Hang or Stack 20”L x 5”W x 13”H Weight 1 lb. 9 oz.
Truck Grounding Reels
www.linestar.ca
Provides an efficient and positive means to ground trucks near energized electrical lines. The spring loaded drum controls payout and take up. Each reel with factory installed cable includes a 6’ length of 2/O ground cable to connect to the truck and a bronze body clamp to attach to the ground rod.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
147
GR43BS2 Rotating Ground Adapter
This unique tool provides protection while the conductor is pulled from reels. It adds conductor grounding but does not replace other grounding practices The adapter slides on the reel mandrel. The outer collar connects to the tail of the conductor on the reel and the inner collar connects to a ground rod.
grounding equipment
specialty grounding
TEG2B2M Cable Reel Grounding Set
Consisting of a 3’ length and a 15’ length of 2/O yellow jacketed cable, both with ball stud clamps on one end and C-type clamps on the other.
GR43BS Rotating Ground Adapter and TETGR Ground Rod sold separately.
TETGR Screw Ground Rod A temporary 6’ copperclad ground rod with T-Handle.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
grounding equipment
148
personal protective ground grids Non-Slip Grid with Long Ball Stud Only Part # 101-25-50-V 201-25-50-V 601-25-50-SR
Slip-Resistant Ground Grids
These grids provide the same protection as the above but are made of a black, slip-resistant material. Ideal for use in rain, snow or icy conditions.
Size 58” x 58” 58” x 120” 120” x 120”
Non-Slip Protective Grid Kits Part # HV101-25-50V HV201-25-50V HV602-25-50V
Size 58” x 58” 58” x 120” 120” x 120”
Kits include a 6’ length of 2/O grounding cable with a C-Clamp on one end and a Ball Socket clamp on the other end, a long ball stud and vinyl storage bag.
T600-1549 Cluster Bar
The 5/8” x 5” aluminum bar accepts ground clamps for equipotential grounding techniques. Supplied with an adjustable wheel binder and 36” of chain for poles.
B90-PBC Safety Grounding Pole Band
www.linestar.ca
Body Material: High Quality Aluminum Qualification: ASTM F855 Max Fault Current Rating: 43,000 Amps @ 15 Cycles 30,000 Amps @ 30 Cycles
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
149 grounding equipment
grounding accessories
S1600-7 Insulated Hanger
Used as a parking stand when installing jumper or grounding clamps. It has a 15” Epoxiglas pole and a conductor capacity of 636 ACSR. Studs are 1/2” x 3-1/2”.
TEGCTH T-Handle Adapter
Converts the shotgun eye of a ground clamp into a T-Handle.
G4754-1 4-Way Terminal Block
Used to attach ground leads from grounding clamps to a common ground. Accepts unthreaded ferrules only.
930 Ground Rod Driver
This ground rod driver is a simple, unique tool designed to ease the chore of driving ground rods. Compact and easy to handle, it enables a workman to drive an 8’ rod while standing on the ground. Its size and shape make it easy to store on most line trucks. The 930 is for 5/8” ground rods, and the 930UT is also for 5/8” ground rods and features hand guards.
GRT1000 Series Ground Resistance Tester
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Clamp-on ground rod/wire resistance tester, designed for loop grounding systems to provide easy and accurate resistance ground measurements.
cleaning brushes
150
conductor cleaning brushes
BB-1 Knife
WB-1
Replacement Brush
Brush Blade Skinning Knife/Brush • 2 in 1 Tool
BrushBlade™ combines 2 tools into one and helps linemen decrease outages, minimize open neutrals and bad connections, and create significant savings by brushing conductors properly! The two tools are a knife and an integrated wire brush. The wire brush helps clean conductors to make better connections and covers conductors up to 1000 MCM. This covers most conductors and the wire brush is easily replaceable. Other key features that make this product unique are the reversible thumb stud for quick one handed opening from the left or the right and the built-in nonconductive snap ring for easy storage. Not only is it more efficient but it is significantly safer than knives currently available. BrushBlade™ is safer because the blade can be closed when not in use, locks in the open position preventing accidental closing, has a blunt tip, and a blade back design which discourages scraping the aluminum conductors.
M4455-92 Universal Conductor Brush 1-1/4” Diameter x 6” Long
M4455-93 Conductor Brush
1-1/4” Diameter x 6” Long
10-180 Universal Conductor V-Brush 10-178 Conductor V-Brush with Shotgun Eye
www.linestar.ca
10-179 Replacement Brushes Box of 10 brushes for both 10-178 and 10-180.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
151
conductor cleaning brushes •2 brushes in 1 tool •Flat Brush and Round Brush (up to 1000 MCM) •Durable and made of non-conductive material •Compact and Lightweight – weighs less than ½ pound •Wire brushes are easily replaceable (WB-1) •Integrated brush design eliminates lineman hand and leg discomfort currently experienced with other wire brushes •Convenient to carry on climbing belts or in bucket trucks
cleaning brushes
MFRWB-1 Mini FlatRoundTM Wire Brush
HJWB-1 Hand J Wire Brush
•Double J Design Allows Top and Bottom Conductor Brushing •Works in All Shot Gun Sticks and Universal Sticks •Strong Durable and Light Weight Base •Wire Brushes are Replaceable •Wire Brush Accessory (use 5/32” Allen Key) •Sure Grip Handle for Maximum Control •Dual Attachment for Hot Sticks or Shot Gun Sticks
SJWB-1 Swivel J Wire Brush
•Adjustable Swivel Action Enables Smooth Brushing –Floats Freely or Locks into 3 Different Angles •Double J Design Allows Top and Bottom Conductor Brushing •Works in All Shot Gun Sticks and Universal Sticks •Strong Durable and Light Weight Base Made out of Aluminum •Wire Brushes are Replaceable •Wire Brush Accessory (use 1/8” Allen Key)
DBWB-1
FRWB-1
DogBoneTM FlatRoundTM The Lineman’s Wire Brush
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
•2 brushes in 1 tool •DogBone - One for Copper and one for Aluminum (up to 1590 MCM) LWB-1 •Durable and made of non-conductive material •Lightweight – weighs less than ½ pound •Wire brushes are easily replaceable •Integrated brush design eliminates lineman hand and leg discomfort currently experienced with other wire brushes •Convenient to carry on climbing belts or in bucket trucks
wire cutting tools
152
acsr conductor trimmer PSC-1 ACSR Trimmer
Quickly and accurately removes the aluminum stranding from around the steel core of ACSR, ACSS and other types of conductor. Operating like a tube cutter, it squarely and cleanly cuts the aluminum stranding without harming the inner steel strands. Made of an aluminum alloy, this tool is lightweight and durable. Kit includes tool, bushing holder & storage case.
PSC-2 Large ACSR Trimmer
For conductor sizes 2034500 and larger. Kit includes tool and case. No bushing holder required.
Order bushings separately.
www.linestar.ca
Item # Part # Description 1 TE54140 Plastic Carrying Case (Not Shown) 2 TE54145 Cutter Frame 3 TE54160 Bushing Holder Assembly 4 TE54165 Bar & Feed Screw Assembly 5 TE34625 Knob Assembly 6 TE54285 Roller & Roll Pin Set, 1 Each 7 TE54305 Cutter Wheel Axle 8 TE54270 Cutter Wheel for PSC-1 9 TE54170 Cutter Wheel for PSC-2
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
Qty. 1 1 1 1 1 2 1 1 1
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
153
Trimmer Bushings
Each of these interchangeable bushings are precision-machined to accurately trim the outer stranding of one particular wire only.
PSC-1 Bushing, PSC-1 Tool and PSC-1 Bushing Holder
PSC-2 Bushing and PSC-2 Tool
Common Bushings for PSC-2 Trimmer
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Cicular Code Part # Stranding Mills/AWG Word TE5761 6/1 2/O Quail TE5762 6/1 3/O Pigeon TE5763 6/1 4/O Penquin TE5764 18/1 266800 Waxwing TE5766 26/7 266800 Partridge TE5768 18/1 336400 Merlin TE5769 26/7 336400 Linnet TE5770 30/7 336400 Oriole TE5773 26/7 397500 Ibis TE5774 30/7 397500 Lark TE5775 18/1 477000 Pelican TE5776 24/7 477000 Flicker TE5777 26/7 477000 Hawk TE5778 30/7 477000 Hen TE5779 18/1 556500 Osprey TE5780 24/7 556500 Parakeet TE5781 26/7 556500 Dove TE5782 30/7 556500 Eagle TE5788 24/7 636000 Rook TE5789 26/7 636000 Gosbreak TE5792 24/7 666600 Flamingo TE5793 24/7 715500 Stilt TE5796 36/1 795000 Coot TE5797 45/7 795000 Tern TE5799 54/7 795000 Condor TE5800 26/7 795000 Drake TE5801 30/19 795000 Mallard TE5883 30/19 954000 Canvasback TE5804 36/1 954000 Catbird TE5805 45/7 954000 Rail TE5806 54/7 954000 Cardinal TE5809 54/7 1033500 Curlew TE5810 45/7 1113000 Bluejay TE5811 54/19 1113000 Finch TE5812 45/7 1192500 Bunting TE5814 45/7 1272000 Bittern TE5822 45/7 1590000 Lapwing TE5860 54/19 1590000 Falcon
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Cicular Code Part # Stranding Mills/AWG Word TD1605 84/19 2156000 Bluebird TD1609 72/7 2167000 Kiwi TD1610 72/7 2034500 Mockingbird TD1611 54/37 2493000 N/A TD1615 76/19 2312000 Thrasher
Common Bushings for PSC-1 Trimmer
wire cutting tools
acsr conductor trimmer bushings
wire cutting tools
154
general purpose bolt cutters These center cut bolt cutters feature a toggle joint that turns 50 lbs. of hand pressure into 4,000 lbs. of cutting pressure. A lockplate keeps the steel jaws from loosening and a screwtype ajustment realigns the edges.
Med. Hard Hard Repl. Part # Materials* Materials** Length Head 1490MC 5/16” 3/16” 14” 1413C 0090MC 3/8” 1/4” 18” 0013C 0190MC 7/16” 5/16” 24” 0113C 0290MC 1/2” 3/8” 30” 0213C 0390MC 9/16” 7/16” 36” 0313C 0590MC 11/16” 1/2” 42” 0513C
Med. Hard Hard Part # Materials* Materials** Length 0090FC 3/8” 1/4” 18” 0190FC 7/16” 5/16” 24” 0290FC 1/2” 3/8” 30” 0390FC 9/16” 7/16” 36” * Brinell 300, Rockwell C31 ** Brinell 455, Rockwell C38
Repl. Head 0013C 0113C 0213C 0313C
Heavy-Duty Bolt Cutters Heavy-duty cutters are used for cutting hard metals, wire mesh and reinforcing rod & bar. The jaws are supported with heavy-duty straps. Like the above tools, they provide 4,000 lbs. of cutting force from 50 lbs. of hand pressure.
Med. Hard Part # Materials* Length 0190MCX 5/16” 24” 0290MCX 3/8” 30” 0390MCX 7/16” 36” 0590MCX 1/2” 42”
Repl. Head 0113CX 0213CX 0313CX 0513CX
Med. Hard Part # Materials* Length 0190FCX 5/16” 24” 0290FCX 3/8” 30” 0390FCX 7/16” 36” ** Brinell 455, Rockwell C48
Repl. Head 0113CX 0213CX 0313CX
fibreglass Round Handle Bolt Cutters
www.linestar.ca
The jaws are made from forged high tensile steel. Designed for cutting spring wire, guy wire, hardened chains, high tensile bolts and other hard materials. The handles are filled with unicellular foam and tested to ASTM standards.
HRC15 HRC31 HRC42 Brinell 200 Brinell 300 Brinell 400 Repl. Part # Soft Mat’l Med. Mat’l Hard Mat’l Length Head BC14F 1/4” 1/4” 3/16” 14” BC14RB BC18F 5/16” 1/4” 1/4” 18” BC18RB BC24F 3/8” 5/16” 5/16” 24” BC24RB BC30F 1/2” 3/8” 11/32’ 30” BC30RB BC36F 5/8” 15/32” 3/8” 36” BC36RB
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
155 wire cutting tools
standard bolt cutters • Unique cam bolt blade adjustment for easy cutter alignment • Forged steel blades for long life • Clevis-mounted blades for greater strength • Custom rubber grips for maximum power
Part # BC14 BC18 BC24 BC30 BC36
Handle Cutting Repl. Material Range Length Head Rubber 1/4” 14” 11281 Rubber 5/16” 18” 11301 Rubber 3/8” 24” 11306 Rubber 1/2” 30” 11316 Rubber 5/8” 36” 11321
Heavy-Duty Cable Cutter Strong, lightweight fiberglass handles. Adjustable pivot bolt provides for blade adjustment. Replaceable, forged, heat treated, and precision ground blades. Part # Cable Length Capacity 704 1-1/4” 21” 350 MCM 705 1-3/4” 25-1/2” 500 MCM 706 1-1/2” 31-1/2” 750 MCM
Shear Type Cable Cutters Lightweight fiberglass handles with alloy steel jaws. Used to cut soft aluminum & copper power cable and communications cable.
Max Insul. Part # Capacity Diameter Length CC-500 500 MCM 1.25” 21” CC-1000 1000 MCM 1.90” 32”
Copper Aluminium Comm. Part # Cable Cable Cable Length 0290FCS 500 MCM 750MCM 1.37” 25” 0390FCS 750 MCM 1200 MCM 1.75” 32”
Shear Type Communications Cable Cutters Communications cable cutters with steel handles. Shear-cut blades give a clean, sharp cut with minimal distortion. Do NOT cut hard cable, ACSR, self-supporting strand or steel.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Cutting Repl. Part # Capacity Length Head 0190CSP 1” 23” 0119CSP 0390CSP 2.25” 37” 0319CSS
wire cutting tools
156
Shear Type Wire Rope Cutters
Compact Cable Cutters
Heavy-duty cutters with steel handles. Notched, shear-cut blades hold and lock cable in cutting position. Cuts wire rope, hard stainless steel cable and aircraft cable with minimal distortion.
High-leverage jaws with shear-cut blades. These cutters have plastic covered, non-slip grips and fit into most tool pouches. Do NOT cut ACSR or steel.
Cutting Part # Capacity Length 1490MTN 1/4” 14” 0190MTN 3/8” 24” 0390MTN 5/8” 36” 0590MTN 3/4” 42”
Repl. Head 1413TN 0113TN 0313TN 0513TN
Copper Aluminium Part # Cable Cable Length 63050 2/O 4/O 9”
Hand-Held Ratcheting Soft Cable Cutters 63060 400 MCM Str. Cu/600MCM Alum.
22-RCC20 750 MCM Stranded
Copper/Aluminum
Copper/Aluminum
22-RCC30 Ratchet Telcutter
For cutting stapeth and OSP communication cable. Not for cutting ACSR or Steel Cable. Ratchet type jaws with shear cut blades. Cut cable cleanly, leaving no burrs or sharp edges.
PRECISION CABLE CUTTERS
6990FS Ratchet Cable Cutter
www.linestar.ca
These quality tools provide cutting ease, minimum cable distortion and long life. They offer a rapid advance system to quickly close the jaws around the wire. The fiberglass handles meet ASTM F711.
Cuts up to 500 MCM stranded copper and 795 aluminum wire. 14” overall length.
Part # Length Capacity 22RCC750 20” 750 MCM Cu/Alum 22-RCC1000 20” 2000 MCM Cu/Alum
WARNING: These tools are NOT considered insulated. Do not attempt to cut energized conductors with any of these cutters. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
157 wire cutting tools
hand-held ratcheting acsr cable cutters
22RACSR ACSR Cutter
The wide jaws accept up to 556 MCM multi-strand ACSR. The fiberglass handles incorporate a fast advance system that quickly close the blades around the wire.
22-RACSR10 ACSR Cutter
Cuts up to 336 single-strand ACSR.
63800 ACSR Cutter
The replaceable cutting blades can easily cut through multi-strand 477 MCM ACSR. It also cuts up to 1-1/4” copper/aluminum, 1” solid copper and 1/2” guy wire; not for EHS. Weighs 3.2 lbs. and is 13-3/4” long.
63858 Replacement Blades
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
wire cutting tools
158
hard cable ratchet cutters
8690FH
8690FH Jaws Shown Wire Rope Mild Telephone ACSR, EHS Guy Aircraft Stainless Steel Rod, Cable Repl. Part # ACAR Strand Cable Steel Bolts (self-supporting) Length Cutterhead 8690CK -- .50” - - -- .50” -- 28” 8613CK 8690FH 1.18” - - -- -- -- 1.18” 29-1/4” 8613FH 8690TN -- .63” .63” .63” -- -- 36” 8613TN
Soft Cable Ratchet Cutters 8790CS
www.linestar.ca
8790FSK Copper & Copper & Rubber Aluminium Aluminum & Lead Repl. Part # Power Communication Covered Length Cutterhead 8690CS 3” 3” 3” 29-3/4” 8613CS 8690FSK 2” 2” 2” 27-1/2” 8613FSK 8790CS 3” 3” -- 27-1/2” 8713CS 8790FSK 2” 2” -- 27-1/2” 8713FSK
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
159
S-Series tools cut anything from guy wire* to anchor rod and most overhead and underground cables. The S-series cutters are portable, lightweight, and made to last years under the toughest field conditions. The S-40B and S-85 feature a two stage pumping piston for rapid advance. The new S-240CC, S-32CC and SP-24CC hydraulic cutters were specially engineered to cut the toughest EHS guy wire, ground and anchor rods. The SP-24CC is the remote head version, which requires an external 10,000 psi pump in order to operate. The anvil style, center cut blades eliminate jamming problems common to shear style cutters, and the blades are easily replaced in the field. The tools are made of high grade steel and have rubber handle grips. All tools are black zinc oxide coated to help reduce corrosion. A flip-top latch opens the tool jaw to easily accept cables and wires. The head can be rotated up to 180° to facilitate easy wire positioning and operator leverage.
wire cutting tools
S-series Handheld Hydraulic Cutters
Consult the chart below to pick the proper cutter for your needs. *NOTE: DO NOT CUT EHS GUY WIRE. FOR EHS GUY WIRE SPECIFY S-240CC, S-32CC OR THE REMOTE HEADS SP-24CC OR SP-32CC1.
Specifications
Model S-16 S-20 S-240 S-32 S-40B S-55 S-85 S-240CC S-32CC Output 4.4 Ton 4.4 Ton 7.8 Ton 19.8 Ton 6.3 Ton 13 Ton 2.7 Ton 7.8 Ton 19.8 Ton Weight 6 lbs. 6 lbs. 9 lbs. 21 lbs. 12 lbs. 17 lbs. 15 lbs. 11 lbs. 23 lbs. Length 15”L 15”L 17”L 27”L 23”L 24”L 26”L 18.5”L 27”L Jaw Opening .6” .75” .9” 1.25” 1.6” 2” 3.3” .9” 1.25”
Capacities
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
Do Not Cut Do Not Cut 16mm 1”
26mm
16mm 26mm 1” Do Not Cut Do Not Cut Do Not Cut Do Not Cut 14mm 9/16” EHS
22mm 7/8” EHS
Do Not Cut Do Not Cut
1/4”
1/2”
100%
Canadian Owned
www.linestar.ca
Wire Ropes 16mm 20mm 22mm 32mm 20mm 26mm Do Not Cut 5/8” 3/4” 7/8” 1-1/4” 3/4” 1” Soft Steel 16mm 17mm 22mm 32mm 20mm 32mm Do Not Cut Bolts 5/8” 11/16” 7/8” 1-1/4” 3/4” 1-1/4” 5/8” Rebar, Ground & 13mm 13mm 16mm 22mm 16mm 20mm Do Not Cut Anchor Rod 1/2” 1/2” 5/8” 7/8” 5/8” 3/4” 5/8” Cu & Al 16mm 20mm 22mm 32mm 40mm 50mm 76mm Wire 5/8” 3/4” 7/8” 1-1/4” 1-1/2” 2” 3” ACSR 16mm 20mm 22mm 32mm 40mm 50mm Do Not Cut 5/8” 3/4” 7/8” 1-1/4” 1-1/2” 2” Standard 13mm 14mm 16mm 22mm 16mm 20mm Do Not Cut Guy Wire 1/2” 1/2” 5/8” 7/8” 5/8” 3/4” Telephone & Lead Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut 85mm Sheathed 3.35” Cable Chain Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut
www.linestar.ca
wire cutting tools
160
S-series Handheld Hydraulic Cutters
S-16
S-20
S-240
S-240CC
S-32
S-32CC
S-40B
S-55
S-85
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
The SP-SERIES remote head units connect to any 10,000 psi, high pressure, hydraulic pumping system. Choose from seven different models of production cutters, to cut costs and efforts. A 3/8” screw-type male coupler is supplied with each tool. Huskie Tools remote cutters have a hinged head which can be opened for easy cable or bar insertion. The movable blade advances in a shear fashion, to cut the material cleanly. When the cutting pressure is relieved an internal ram spring retracts the blade. The guillotine cutting style was chosen over scissor type cutting because of its powerful output force, larger cable capacities, compact size and reliability. All tools can be used under water, consult factory for specific applications.
161 wire cutting tools
sp-series Hydraulic Operated Remote CUtting Heads
NOTE: FOR EHS GUY WIRE SPECIFY S-24CC, S-32CC OR THE REMOTE HEAD SP-24CC.
FEATURES • Lightweight and Portable • Operate from Any 10,000 psi Hydraulic Source • Works in Any Position
Specifications
Model SP-20 SP-24 SP-24CC SP-32 SP-32CC1 SP-35 SP-40 SP-55 SP-85 SP-100 Output 4.4 Ton 7.8 Ton 7.8 Ton 20 Ton 24 Ton 6.2 Ton 6.28 Ton 13 Ton 2.7 Ton 8.3 Ton Weight 3 lbs. 6 lbs. 21 lbs. 21 lbs. 26 lbs. 8 lbs. 8.5 lbs. 20 lbs. 16 lbs. 29 lbs. Length 8”L 11”L 14”L 14”L 13.5”L 14”L 12”L 17”L 19”L 24”L Jaw Opening .75” .9” .9” 1.25” 1.25” 1.3” 1.6” 2” 3.3” 4”
Capacities
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Wire Ropes 20mm 22mm Do Not Cut 32mm Do Not Cut Do Not Cut 20mm 26mm Do Not Cut Do Not Cut 5/8” 7/8” 1-1/4” 3/4” 1” Soft Steel 14mm 20mm 16mm 32mm 26mm 14mm 16mm 32mm Do Not Cut Do Not Cut Bolts 9/16” 3/4” 5/8” 1-1/4” 1” 9/16” 5/8” 1-1/4” Rebar, 13mm 16mm 16mm 26mm 26mm 13mm 16mm 20mm Do Not Cut Do Not Cut Ground & 1/2” 5/8” 5/8” 1” 1” 1/2” 5/8” 3/4” Anchor Rod Cu & Al 20mm 22mm Do Not Cut 32mm Do Not Cut 800 MCM 40mm 50mm 76mm 3-1/2” Wire 3/4” 7/8” 1-1/4” 1-1/2” 2” 3” ACSR 20mm 22mm Do Not Cut 32mm Do Not Cut 336 MCM 40mm 50mm Do Not Cut Do Not Cut 3/4” 7/8” 1-1/4” 1-1/2” 2” Standard 14mm 16mm 14mm 22mm 22mm 14mm 16mm 20mm Do Not Cut Do Not Cut Guy Wire 1/2” 5/8” 9/16” EHS 7/8” 7/8” EHS 1/2” 5/8” 3/4” Chain Do Not Cut Do Not Cut 1/4” Do Not Cut 1/2” Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Comm. Cables Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut 3.35” 4” Lead Sheath Cables Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut 3.35” 4”
wire cutting tools
162
Ss-series Hydraulic Operated Remote Cutting Heads
SP-20
SP-24
SP-24CC
SP-32
SP-32CC1
www.linestar.ca
SP-35
SP-40
SP-55
SP-85
SP-100
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
163
YSP-34
YSP-30
YSP-60
wire cutting tools
Ysp-series Scissor Cutter Remote Heads
YSP-85YC Specifications
Model Output Weight Length
YSP-30 YSP-34 YSP-60 YSP-85YC 4.4 Ton 4.4 Ton 6.6 Ton 8 Ton 6 lbs. 6 lbs. 6 lbs. 10.5 lbs. 12” 12” 12” 18”
CAPACITIES ACSR 477 Do Not Cut Do Not Cut Do Not Cut Copper 500 MCM* 800 MCM 750 MCM 1000 MCM Aluminum 1.18” O.D. 1.24” O.D. 1.18” O.D. 3” Telecommunication Do Not Cut Do Not Cut Do Not Cut 3” Lead Sheath Do Not Cut Do Not Cut Do Not Cut 2.5” * Will not cut ALL 500 MCM copper cable-consult factory.
The YSP-Series tools are remote cutting heads to be used with a 10,000 psi pumping source. YSP-30
can cut ACSR up to 477 and copper and aluminum cables up to 1.18” O.D. WILL NOT CUT 4/0 Penguin or 3/0 Pigeon ACSR cables.
YSP-34
is designed to cut 800 MCM hard drawn copper cable. DO NOT CUT STEEL.
YSP-60
is similar to the YSP-30, except it has a 2” cable capacity and is ideal for aluminum cables up to 2” O.D. and 500MCM Copper. DO NOT CUT STEEL.
YSP-85YC is designed to cut various cables, including copper up to 1000 MCM and Aluminum up to 3”. DO NOT CUT STEEL.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
HTADPT Hot Stick Adapter
wire cutting tools
164
DA-12 Hydraultic Low Pressure 4” Cable Cutter
The DA-12 hydraulic hand-held, cable cutter can be operated directly from the utility line truck. At 2,500 psi pressure it can cut four-inch lead sheath cables as well as 4200 pair communications cables. A 6 ton cutting force is produced at 2,500 psi pressure, less than 2,500 psi will reduce the cutting capacity. It operates on open center trucks and comes with HTMA couplers.
Specifications Output Weight Size
CUTTING CAPACITIES Lead Sheath Comm. Cables
www.linestar.ca
The four inch jaws slice through lead, copper and aluminum cables cleanly and without jamming because of the double-acting system. The DA-12 is portable, with non-slip, knurled handles and a safety ring. It has a positive open and close position and a special built-in safety trigger. It stops when you stop.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
6 Ton at 2,500 psi 31 lbs. 15” x 15” x 17”
4” 4200 pair
FEATURES • Operates on 2500 psi • 4” Jaw Opening • Safety Trigger
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
150
British Columbia: phone: 604-594-2701 • fax: 604-594-2751 Alberta: phone: 403-243-1900 •
[email protected] Alberta: phone: 403-243-1900 • fax: 403-243-2063 British Columbia: phone: 604-594-2701 •
[email protected] Saskatchewan/Manitoba: phone: 204-783-9771 • fax: 204-783-8951 Manitoba: phone: 204-783-9771 •
[email protected] Ontario: phone: 905-564-5344 •
[email protected]
100%
100% Canadian Canadian Owned Owned
www.linestar.ca
www.linestar.ca
wire cutting tools
wire cutting tools
165
166 wire cutting tools
huskie battery operated cutters REC-630Y
6.6 Ton Cutting Tool with 1-3/16” Jaw Opening SPECIFICATIONS Output Weight Size Jaw Opening
6.6 Ton 10.3 lbs. with Battery 15.5”L x 12.5” H x 3.1”W 1.2”
CUTTING ESTIMATES BP-84 500 MCM Cu 110
CUTTING CAPACITIES *ACSR Copper Aluminum Standard Guy Wire Bar
• • • • • • • • • •
336 MCM 500 MCM 1.18” O.D. 3/8” Do Not Cut
FEATURES
Open Scissor Jaw for Easy Cable Insertion Tested Up to 75kV One Hand Operation Rotational Head Bright White, LED Lights for Working in Low Light Conditions Rapid Advance Ergonomically designed for balance & grip Weather Resistant Housing Overload Bypass Protection 5 Year Warranty on Tool, Battery & Charger
The REC-630Y was designed to cut ACSR cables up to 336 MCM, as well as copper cables up to 500 MCM and aluminum cables up to 1.18” outside diameter. The hydraulic system features a rapid advance for reduced cycle times. All cuts are clean with a minimal amount of cable distortion, which allows for easy connector installation on cables. The open “scissor” type jaw is very convenient for the operator when reaching out to cut cable opposed to latching the cutter jaw around the cable. The head can be rotated 180° for greater maneuverability in tight working quarters. The keeper plate on the REC-630Y prevents jaws from spreading apart when cutting ACSR.
www.linestar.ca
*NOTE: This tool is not recommended for cutting 4/0 Penguin or 3/0 Pigeon ACSR Cables.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
167 wire cutting tools
huskie battery operated cutters REC-634YC
6.6 Ton Cutting Tool with 1-3/8” Jaw Opening SPECIFICATIONS Operation Weight Jaw Opening
Battery powered 6 lbs. with battery 1-3/8”
CONNECTOR RANGE Aluminum up to 1.4” O.D. Copper up to 800 MCM Do Not Cut ACSR Do Not Cut Steel
• • • • • • • • • • •
FEATURES
Open Scissor Jaw for Easy Cable Insertion Tested Up to 75kV One Hand Operation Rotational Head Rapid Advance Ergonomically Balanced Ergonomic Pistol Grip Handle Weather Resistant Housing Overload Circuit Breaker Protection For Copper and Aluminum Only 5 Year Warranty on Tool, Battery & Charger
Large copper cable cutting is finally made easy with the REC-634YC – just pull the trigger and 6.6 tons immediately goes to work for you. The hydraulic system now features a rapid advance for reduced cycle times. This tool is similar to the REC-630Y, but has a slightly larger jaw opening without a “keeper” guard. Its sharp blades are rated for copper and aluminum cables only, up to 800 MCM or 1.4” Al outside diameter. The open “C” type jaw is very convenient for the operator when reaching out to cut cable, as opposed to latching a cutting jaw around the cable. The jaws will accept a maximum of 800 MCM copper or aluminum cables up to 1.4.” Distortion of the cable is minimal and cables can still be sleeved easily. Once the cable is severed, the cutter blades can be opened by the push of the release trigger located below the activation trigger – one finger is all that is needed to cut and release the tool. NOTE: DO NOT CUT STEEL
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
wire cutting tools
168
huskie battery operated cutters REC-660YC
6.6 Ton Scissor-Type Cutting Tool with 2.5” Jaw Opening SPECIFICATIONS Operation Weight Jaw Opening
Battery powered 6 lbs. with battery 2.5”
CONNECTOR RANGE Aluminum up to 2” O.D. Copper up to 500 MCM Do Not Cut ACSR Do Not Cut Steel
FEATURES • • • • • • • • • • • •
Open Scissor Jaw for Easy Cable Insertion Tested Up to 75kV One Hand Operation Rotational Head Rapid Advance Ergonomically Balanced Ergonomic Pistol Grip Handle Weather Resistant Housing Overload Circuit Breaker Protection Specifically Designed to Cut Large Jacketed Underground Cable For Copper and Aluminum Only 5 Year Warranty on Tool, Battery & Charger
The REC-660YC works well for most underground aluminum cable cutting applications. It was designed to cut copper cables up to 500 MCM and aluminum up to 2” maximum outside diameter. The extra wide jaws make cutting the larger diameter underground cables easier. The hydraulic system is designed the same as the REC-658U featuring a rapid advance ram to reduce cycle time. Because of the larger cutting surface of the blades, the maximum size copper cable that can be cut is 500 MCM. Larger cables will simply cause the cutter to bypass, which is a built-in overload safety device to prevent damage to the tool.
www.linestar.ca
The large jaws can be placed over cables that lie flat on the ground and the cables will be scooped up as the cutting jaws are closed. All cuts are clean so that there is minimal cable distortion for cable sleeving purposes. NOTE: *Will not cut ALL 500 MCM copper cable-consult factory. Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to “bypass” feature.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
169 wire cutting tools
huskie battery operated cutters REC-685YC
9 Ton Scissor-Type Cutting Tool with 3.3” Jaw Opening SPECIFICATIONS Output Weight Size Jaw Opening
9 Ton 14.7 lbs. with Battery 20.8”L x 13.3”H x 3.4”W 3.3”
FEATURES • • • • • • • • • • • •
Open Scissor Jaw for Easy Cable Insertion Tested Up to 75kV One Hand Operation Rotational Head Rapid Advance Ergonomically Balanced Ergonomic Pistol Grip Handle Weather Resistant Housing Overload Circuit Breaker Protection Specifically Designed to Cut Large Jacketed Underground Cable For Copper and Aluminum Only 5 Year Warranty on Tool, Battery & Charger
The REC-660YC works well for most underground aluminum cable cutting applications. It was designed to cut copper cables up to 500 MCM and aluminum up to 2” maximum outside diameter. The extra wide jaws make cutting the larger diameter underground cables easier. The hydraulic system is designed the same as the REC-658U featuring a rapid advance ram to reduce cycle time. Because of the larger cutting surface of the blades, the maximum size copper cable that can be cut is 500 MCM. Larger cables will simply cause the cutter to bypass, which is a built-in overload safety device to prevent damage to the tool. The large jaws can be placed over cables that lie flat on the ground and the cables will be scooped up as the cutting jaws are closed. All cuts are clean so that there is minimal cable distortion for cable sleeving purposes.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
NOTE: *Will not cut ALL 500 MCM copper cable-consult factory. Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to “bypass” feature.
170 wire cutting tools
huskie battery operated cutters REC-50M
Gear-Driven Cable Cutter with 2” Jaw Opening
SPECIFICATIONS Operation Weight Size Jaw Opening
Battery powered 6 lbs. with battery 14.5”L x 4”H x 4.5”W 2”
CONNECTOR RANGE Aluminium up to 1500 MCM AI Copper up to 1000 MCM Cu Do Not Cut ACSR Do Not Cut Steel
• • • • • • • •
FEATURES
Improved Ergonomical Handle Tested Up to 75kV One Hand Operation Ergonomically Balanced Weather Resistant Housing Overload Circuit Breaker Protection For Copper and Aluminum Only 5 Year Warranty on Tool, Battery & Charger
www.linestar.ca
The REC-50M battery operated slicing tool cuts 2” cable with the touch of a finger. It features a powerful gear reduction motor that pulls a moveable blade through the toughest copper and aluminum cables. The ROBO*SLICE comfortably fits into the lineman’s gloved hand, and repetitive ratcheting movement is entirely eliminated. Just a squeeze of the rocker arm trigger is all it takes to make a cut and almost no muscle power is needed. As a result, the risk of sprains, strains, and lost time due to muscle related injuries can be significantly reduced. The moveable blade has wide gear teeth for extra power and full cutting traction. Gear guides are attached on both ends of the movable blade to align the gear teeth with the internal pinion gear.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
171
rec-54acm robo*slice™ Gear-Driven Cable Cutter with 2-1/8” Jaw Opening
wire cutting tools
huskie battery operated cutters
Specifications Weight 7.2 lbs. with Battery Size 16”L x 4”H x 4.5”W Jaw Opening 2-1/8”
CUTTING estimates BP-80 1000 MCM Cu 25 1500 MCM Al 30
CUTTING CAPACITIES Aluminum Copper
1500 MCM 1000 MCM*
FEATURES • • • • • • • The REC-54ACM was designed to cut stranded copper cables and aluminum. The jaws will accept a maximum of 1500 MCM aluminum. The operation of this tool is the same as the REC-54M, but it has sharper blades for cutting only non-ferrous materials. Do not cut steel with this model, or blade damage will occur. The REC-54ACM comfortably fits into the lineman’s gloved hand, and repetitive ratcheting movement is entirely eliminated. We have rotated the handle 90° to the blade to achieve a more ergonomic and comfortable cutting position. Just a squeeze of the trigger is all it takes to make a cut and almost no muscle power is needed. As a result, the risk of sprains, strains, and lost time due to muscle related injuries can be significantly reduced.
Improved Ergonomic Handle 2-1/8” Jaw Opening Cuts up to 1500 MCM Al One Hand Operation Safety Lockout Switch Upgraded Motor and Gear System Comes with 2 batteries, AC Charger & Case • 5 Year Warranty on Tool, Battery & Charger *Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to overload circuit breaker protection feature. DO NOT CUT STEEL OR ACSR. Consult factory for more information on cutting copper cable.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
The moveable blade has wide gear teeth for extra power and full cutting traction. Gear guides are attached on both ends of the movable blade to align the gear teeth with the internal pinion gear.
wire cutting tools
172
huskie battery operated cutters rec-54m robo*slice™ Gear-Driven Cable Cutter with Notched Blade & 2-1/8” Jaw Opening Specifications Weight 8 lbs. with battery Size 15.5”L x 4.5”H x 5”W Jaw Opening 2-1/8”
CUTTING estimates BP-80 1590 MCM ACSR 35+
CUTTING CAPACITIES Copper Aluminum ACSR
750 MCM 1500 MCM 1590 MCM*
FEATURES • • • • • • • •
improved ergonomic handle 2-1/8” jaw opening cuts up to 1500 mcm al One hand operation safety lockout switch upgraded motor and gear system comes with 2 batteries, ac charger & case 5 year warranty on tool, battery & charger
* NOT INTENDED FOR USE ON 795 DRAKE. Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to overload circuit breaker protection feature.
The REC-54M is a heavy duty cable cutter primarily used to cut ACSR. It will cut up to 1590 MCM ACSR* and copper cables up to 750 MCM. The large jaw opening will also accommodate aluminum cables up to 1500 MCM. Huskie Tools has notched both cutting blades to avoid the denting of the cutting surfaces when steel strand is encountered. We have rotated the handle 90° to the blade to achieve a more ergonomic and comfortable cutting position. FOR CLEAN CUTS ON COPPER & ALL ALUMINUM CABLE PLEASE REFER THE REC-50U, REC-54AC & THE REC-54ACM.
www.linestar.ca
This tool also incorporates a blade retainer, which keeps the blades from spreading apart while cutting steel cables. The REC-54M was designed for single and multistranded steel cores and aluminum cables. The powerful motor & gear drive allow the operator to cut through the toughest cables with just the pull of the trigger. NOTE: The REC-54M is not intended to cut guy wires, ground rod or bolts.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
173
rec-y33 robo*slice™ Gear-Driven Scissor Cutter with 1.5” Jaw Opening Specifications Weight 7.2 lbs. with Battery Size 16”H x 4”L x 4.5”W Jaw Opening 1.25”
wire cutting tools
huskie battery operated cutters
CUTTING estimates BP-80 636 ACSR 60
CUTTING CAPACITIES Copper Aluminum ACSR
500 MCM* Up to 1-1/4” O.D. 636 MCM
FEATURES • • • • • • •
Tested up to 75kV One hand operation Ergonomically balanced Weather resistant housing Overload circuit breaker protection Comes with 2 batteries, AC charger & case 5 year warranty on tool, battery & charger
* Consult factory for more information on cutting 500 MCM copper cable. The REC-Y33 cable cutter is used to cut up to 636 ACSR and up to 500 MCM* copper cables. The open jaw makes it easy to insert cables for one handed operation. The jaw, which incorporates a blade retainer, keeps the blade from spreading apart when cutting cable with a steel core.
Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to overload circuit breaker protection feature.
It features a lock-out switch for reversing the blade direction all-with one handed operation. The powerful gear drive allows the operator to quickly cut some of the toughest cables with ease. NOTE: The REC-Y33 will not cut guy wire, ground rod anchor rod or bolts.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
wire cutting tools
174
huskie battery operated cutters SL-S20 robo*slice™ 6 Ton Streamline Cutting Tool with .75” Jaw Opening Specifications Output Weight Size Jaw Opening
6 Ton 6 lbs. with Battery 19” .75”
CUTTING estimates BP-80 336 ACSR 90 1/2” Wire Rope 90 1/2” Rebar 60 1/2” Ground Rod 60 3/8” Guy Wire 45
CUTTING CAPACITIES Wire Rope Rebar (Sc 40) Rebar (Sc 60) Ground Rod ACSR Guy Wire
5/8” 1/2” 3/8” 1/2” 477 MCM 3/8”
FEATURES The SL-S20 was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters.
www.linestar.ca
With the pull of a trigger, you can cut ACSR cables up to 477, standard guy wires to 3/8”, and ground rods to 1/2”. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • • • • •
Flip-top latching head Tested up to 75kV One hand operation Rotational head Rapid advance Comes with 2 batteries, AC charger & case 5 year warranty on tool, battery & charger
Optional Accessories SL-HLSTR
• • • •
Huskie Tools Holster
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
175 wire cutting tools
huskie battery operated cutters REC-S620 6.6 Ton Battery Powered Cutting Tool with .75” Jaw Opening Specifications Output 6.6 Ton Weight 8.75 lbs. with Battery Size 13.3”L x 10”H x 3.1”W Jaw Opening .75”
CUTTING estimates BP-80 336 ACSR 90 1/2” Wire Rope 90 1/2” Rebar 60 1/2” Ground Rod 60 3/8” Guy Wire 40
CUTTING CAPACITIES Wire Rope Rebar (Sc 40) Rebar (Sc 60) Ground Rod ACSR Guy Wire
5/8” 1/2” 3/8” 1/2” 477 MCM 3/8”
The REC-S620 was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters. The REC-S620 was designed from the same hydraulic system as the REC-658U featuring a rapid advance ram for reduced cycle times.
FEATURES • • • • • • • • • •
Flip-top latching head Tested up to 75kV One hand operation Rotational head Rapid advance Ergonomically balanced Ergonomic pistol grip handle Weather resistant housing Overload bypass protection 5 year warranty on tool, battery & charger
With the pull of a trigger, you can cut ACSR cables up to 477, standard guy wires to 3/8”, and ground rods to 1/2”. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters. The REC-S620 has an overload bypass that will “kick out” when the tool reaches 6.6 tons or is attempting to cut cables beyond its capacities. NOTE: DO NOT CUT EHS GUY WIRE OR CASE HARDENED STEEL ROADS. SEE REC-S624CC, S-24CC, SP-24CC, S-32CC OR SP-320C1.
Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to “bypass” feature.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
wire cutting tools
176
huskie battery operated cutters REC-S624CC 8 Ton Battery Powered Cutter with .95” Jaw Opening Specifications Output 8 Ton Weight 10.8 lbs. with Battery Size 13.7”L x 10.2”H x 3.1”W Jaw Opening .95”
CUTTING estimates BP-80 336 ACSR 90 1/2” Wire Rope 90 1/2” Rebar 60 1/2” Ground Rod 60 3/8” Guy Wire 40
CUTTING CAPACITIES Wire Rope Rebar (Sc 40) Rebar (Sc 60) Ground Rod ACSR Guy Wire Guy Wire [EHS]
The REC-S624H was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters. The REC-S624H was designed from the same hydraulic system as the REC-658U featuring a rapid advance ram for reduced cycle times. With the pull of a trigger, you can cut ACSR cables up to 477, standard guy wires to 5/8”, and ground rods to 5/8”. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters. The REC-S62H has an overload bypass that will “kick out” when the tool reaches 8 tons or is attempting to cut cables beyond its capacities. NOTE: DO NOT CUT CASE HARDENED STEEL ROADS. SEE REC-S624CC, S-24CC, SP-24CC, S-32CC OR SP-320C1.
7/8” 5/8” 1/2” 5/8” 477 MCM 5/8” 7/16”
FEATURES • • • • • • • • • •
Flip-top latching head Tested up to 75kV One hand operation Rotational head Rapid advance Ergonomically balanced Ergonomic pistol grip handle Weather resistant housing Overload bypass protection 5 year warranty on tool, battery & charger
www.linestar.ca
Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to “bypass” feature.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
177 wire cutting tools
huskie battery operated cutters REC-S624CC 8 Ton Cutting Tool with .95” Jaw Opening Specifications Output 8 Ton Weight 10.8 lbs. with Battery Size 13.7”L x 10.2”H x 3.1”W Jaw Opening .95”
CUTTING estimates BP-80 477 ACSR 90 1/2” Rebar 60 1/2” Ground Rod 60 3/8” Guy Wire 40
CUTTING CAPACITIES ACSR 477 MCM Standard Guy Wire 5/8” EHS Guy Wire 9/16” Ground Rod 5/8” Rebar (Sc 40) 5/8”
The REC-S624CC was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters. The REC-S624CC was designed from the same hydraulic system as the REC-658U featuring a rapid advance ram for reduced cycle times.
FEATURES • • • • • • • • • •
Flip-top latching head Tested up to 75kV One hand operation Rotational head Rapid advance Ergonomically balanced Ergonomic pistol grip handle Weather resistant housing Overload bypass protection 5 year warranty on tool, battery & charger
phone: phone: phone: phone:
The REC-S624CC has an overload bypass, which will “kick out” when tool reaches 8 tons or is attempting to cut cables beyond it’s capacities.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
The specially designed anvil style blades were made to cut EHS up to 9/16” and with the pull of the trigger, you can cut ACSR cables up to 477 MCM, standard guy wires to 5/8”, and ground rods to 5/8”. The specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters.
wire cutting tools
178
huskie battery operated cutters REC-SS640 8 Ton Cutting Tool with 1.6” Jaw Opening Specifications Output 8 Ton Weight 13.2 lbs. with Battery Size 16.1”L x 11.4”H x 3.1”W Jaw Opening 1.6”
CUTTING estimates BP-80 795 ACSR 60 3/4” Wire Rope 90 5/8” Rebar 60 5/8” Ground Rod 60 3/8” Guy Wire 40
CUTTING CAPACITIES
The REC-S540 was designed to up to 1590 ACSR and regular guy wires and ground rod up to 5/8”. The REC-S540 is idea for aerial bucket work and trench operations. It features a two stage, rapid advance ram for reduced cycle times.
Wire Rope Rebar (Sc 40) Rebar (Sc 60) Ground Rod ACSR Guy Wire Cu/Al Cable
This cutter is made for one-handed operations. Simply remove the • pin latch, place over cable, reinsert pin, and cut. A built-in bypass will • pop off if the material is beyond the cutter’s capacity. It is not recom- • mended to cut hardened steel. • • NOTE: DO NOT CUT EHS GUY WIRE OR CASE HARDENED STEEL ROADS. SEE REC-S624CC, S-24CC, SP-24CC, S-32CC OR SP-320C1. • • • •
3/4” 5/8” 5/8” 5/8” 1590 MCM 5/8” 1.5”
FEATURES Tested up to 75kV One hand operation Rotational head Rapid advance Ergonomically balanced Ergonomic pistol grip handle Weather resistant housing Overload bypass protection 5 year warranty on tool, battery & charger
www.linestar.ca
Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to “bypass” feature.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
179 wire cutting tools
huskie battery operated cutters rec-s3550 robo*cut™ 13 Ton Cutting Tool with 2” Jaw Opening Specifications Output 13 Ton Weight 23 lbs. with Battery Size 21.5”L x 10.5”H x 3.5”W Jaw Opening 2”
CUTTING estimates BP-80 Wire Rope 60 Rebar, Ground & Anchor Rod 45 Cu & Al wire 35 ACSR 45 Standard Guy Wire 30
CUTTING CAPACITIES
The REC-S3550 cuts ACSR, guy wire, wire rope, and ground rod. Powerful and portable with a 2” jaw opening. A latch-type jaw swings open to accept material to be cut. The head can be rotated for proper positioning of rod or cable. This is our most versatile cutter patterned after our S-55 hand operated cutter.
Wire Rope 1” Soft Steel Bolts 1-1/4” Rebar, Ground & Anchor Rod 3/4” Cu & Al wire 2” ACSR 2” Standard Guy Wire 3/4” Telephone & Lead Sheathed Cable DO NOT CUT
NOTE: WILL CUT ALL 795 ACSR CABLE, INCLUDING DRAKE.
FEATURES • • • • • • • • •
Tested up to 75kV Rotational head Rapid advance Ergonomically balanced Weather resistant housing Overload bypass protection Most powerful battery operated cutter Comes with 2 batteries, AC charger & case 5 year warranty on tool, battery & charger
Due to material composition, the ratings are to be used as a guide. Actual capacity may vary due to “bypass” feature.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
55A-10 REC-S3550 Replacement Blade
wire cutting tools
180
huskie battery operated cutters SL-95YC 9 Ton Scissor-Type Cutting Tool Specifications Output 9 Ton Weight 20.75 lbs. with Battery Size 29”L x 10”H x 4.5”W Jaw Opening 3.7”
CUTTING estimates BP-84 1000 MCM Al 60 1000 MCM Cu 90
CUTTING CAPACITIES Aluminum Telecommunication Lead Sheath ACSR DO
3.7” 3.7” 2.5” NOT CUT
FEATURES • • • • • • • • •
Open Scissor Jaw for Easy Cable insertion Rotational Head Rapid Advance Ergonomically Balanced Weather Resistant Housing Overload Bypass Protection Sidebar Handle for Stability and Balance For Copper and Aluminum Only 5 year warranty on Tool, Battery & Charger
The SL-95YC is designed to cut copper and aluminum cables as well as lead-sheathed telecommunication cables. The extremely large jaws and scissor-type blades allow for easy cutting of large underground cables. The sidebar handle allows the user to stabilize and balance the tool. This tool also has a built-in bypass cartridge to avoid cutter damage for those cables that are beyond the cutter’s capacity. The open jaw design allows the user to scoop up cables that are against a wall, in hard to reach areas and/or the ground.
www.linestar.ca
NOTE: DO NOT CUT STEEL.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
181 wire cutting tools
huskie battery operated cutters SL-SB40 8 Ton Cutting Tool with 1.6” Jaw Opening Specifications Output 8 Ton Weight 13 lbs. with Battery Size 21”L x 4.75”H x 3.9”W Jaw Opening 1.6”
CUTTING estimates BP-84 795 ACSR 60 3/4” Wire Rope 90 5/8” Rebar 60 5/8” Ground Rod 60 3/8” Guy Wire 40
CUTTING CAPACITIES Wire Rope Rebar (Sc 40) Rebar (Sc 60) Ground Rod ACSR Guy Wire Cu/Al Cable
3/4” 5/8” 5/8” 5/8” 1590 MCM 5/8” 1.5”
FEATURES • • • • • • •
One Hand Operation Rotational Head Rapid Advance Ergonomically Balanced Weather Resistant Housing Overload Bypass Protection 5 Year Warranty on Tool, Battery & Charger
The SL-SB40 is designed to cut up to 1590 ACSR and regular guy wires and ground rod up to 5/8”. This cutter is made for one-handed operation. Simply remove the pin latch, place over cable, reinsert pin, and cut. A built-in bypass will pop off if the material is beyond the cutter’s capacity. It is not recommended to cut hardened steel. NOTE: DO NOT CUT EHS GUY WIRE OR CASE HARDENED STEEL RODS. SEE REC-S624CC, S-24CC, SP-24CC, S-32CC OR SP-32CC1.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
182 wire cutting tools
huskie battery operated cutters ECO-500 6 Ton Battery Powered Cutting Tool Specifications Output Weight Length
6 Ton 6.8 lbs. with Battery 19.25”
CUTTING estimates BP-80 500 MCM Al 200
CUTTING CAPACITIES ACSR Do Not Cut Aluminum Up to 1.5” Copper Up to 500 MCM Standard Guy Wire Do Not Cut
FEATURES • • • • •
Lightweight ergonomic design One handed operation Rotational Head Tested up to 75kV Compatible with all Huskie 14.4V Batteries
www.linestar.ca
The ECO-500, which is designed for copper and aluminum conductor only, provides a much cleaner cut when working with non-ACSR conductor.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
183
One Battery Works with Every Huskie Tool
One 14.4 Volt Lithium Ion battery powers every Huskie Tools battery operated cutting and compression tool.
BP-84 Huskie Tools Lithium-Ion Battery • • • • • • • • • •
wire cutting tools
accessories for huskie cutters
CH-94 Lithium Ion Charger
High Capacity 4.0Ah Battery Pack 50% Longer Run Time as Compared to NiCad No Memory Effect Lightweight Battery Pack Impact Resistant Housing The Performance is Minimally Affected by Extreme Temperatures Minimal Self-Discharge Non-Hazardous Chemistry and Environmentally Safe Recyclable with the RBRC Recycling Program 5 Year Warranty
• 110V AC Power Cord • Designed for Huskie Lithium Ion batteries only • Redesigned contact terminals for a stronger engagement with the battery • UL/CUL Agency Approvals • Monitors Battery Temperature and Battery Voltage for Correct Charging • 5 Year Warranty • 1 Hour Charge Time
CH-ACC: AC Charger Cord CH-DCC: DC Charger Cord for CH-90
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
LineStar services and repairs all Huskie Battery Operated Tools
wire cutting tools
184
long reach insulated cutting tools
Insulated Ratchet Cable Cutters These cable cutters incorporate a 1-1/2” Epoxiglas main pole with a 3/8” fiberglass operating rod and meet OSHA Electrical Rating 1926.951.
Part # ACSR Length C403-1382 556 kcmil 6’ C403-1384 556 kcmil 8’
Weight 11 lbs. 11-1/2 lbs.
Part # Aluminum Copper Length Weight C403-1381 1,000 kcmil 500 kcmil 6’ 11 lbs. C403-1383 1,000 kcmil 500 kcmil 8’ 11-1/2 lbs.
Insulated Lever Type Cable Cutters Light and medium duty cutterheads mounted on Epoxiglas insulated poles. The plastisol dipped lever handle provides high mechanical force for clean cuts.
Part # ACSR Copper Length Weight H1871-6 1/O 2/O Solid 6’ - 6” 6-3/4 lbs. H1873-6 4/O 4/O Stranded 6’ - 7” 9-3/4 lbs. T403-0687 4/O 4/O Stranded 8’ - 7” 10-1/4 lbs.
Insulated Hydraulic Cable Cutters
www.linestar.ca
The Epoxiglas pole and hydraulic hose have been tested to 100 kV per foot and the hydraulic oil has a dielectric strength of 25 + kV per ASTM D877-64.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Part # ACSR Al/Cu Length Weight C403-0731 54 MCM 500 MCM 6’ 13 lbs. C403-0732 954 MCM 500 MCM 8’ 15 lbs.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
185
For cutting ACSR and Soft Wire conductors Powerful lightweight ratchet cutter Cutting heads are interchangeable Operates in any position Handle folds to store in 6” canister Upper roller minimizes shaft deflection Parts are standardized for easy replacement Insulated fiberflass shaft and operating rod for maximum safety and durability • Overhead - provides cleans cuts for splicing conductors • Underground - operates in a 5” wide trench
wire cutting tools
insulated ratchet cutters • • • • • • • •
RATCHET CUTTER COMPLETE WITH A11055 ACSR HEAD Part # Ft. Lbs. 11-005 5 9 11-006 6 10 11-008 8 10.6 11-010 10 11.5
A11056
RATCHET CUTTER COMPLETE WITH A11055 SOFT WIRE CUTTER HEAD Part # Lbs. Case 11-015 5 01-005 11-016 6 01-006 11-018 8 01-008 11-020 10 01-010
11-006
A11055
lever handle wire cutter • • • •
Three cutter jaws available Light Duty - ties wires up to 1/0 ACSR Heady Duty - for ACSR up to 4/0 18/1 Super Duty - for ACSR up to 336.4 18/1
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Stick Cutting Part # Size Description Capacity Lbs. Case 11-055 1-1/4” x 5’ Light duty cutter 1/0 ACSR 7.5 7220-5 11-056 1-1/4” x 6’ Light duty cutter 1/0 ACSR 8.5 7220-6 A11035 Replacement Head for 1/0 ACSR 1.2 Light duty cutter 10672 1-1/2” x 5’ Heavy duty cutter 4/0 ACSR 8.5 7220-5 9927 1-1/2” x 6’ Heavy duty cutter 4/0 ACSR 9.5 7220-6 9927-8 1-1/4” x 8’ Heavy duty cutter 4/0 ACSR 11.5 7220-8 A11033 Replacement Head for 4/0 ACSR 1.8 Heavy duty cutter 11441 1-1/2” x 5’ Super duty cutter 4/0 ACSR 11 7220-5 11440 1-1/2” x 6’ Super duty cutter 4/0 ACSR 12 7220-6 11440-8 1-1/4” x 8’ Super duty cutter 4/0 ACSR 14 7220-8 A11038 Replacement Head for 4/0 ACSR 3.5 Super duty cutter
compression tools
186
compression tools MD6 Type Tools
Die Nose Part # Groove Die MD6 D3 BG (5/8”) MD6-8 D3 O (1/2”) MD6-4 D3 BG (5/8”) MD7 D3 BG (5/8”) MD7-8 D3 O (1/2”)
Installs a full range of connectors, taps, splices & terminals from #14 through 4/O for Full-Tension and Non-Tension applications. The D3 groove serves as a die seat to accept “W” type dies.
Handles Wood Wood Fiberglass Polymer Polymer
ELE-246 Compression Tool
This tool has three compression grooves for use with oval sleeves. Connector sizes #2, #4 #6. Cable sizes 3/16”, 3/8”, 5/32”
K425BG Greenlee Fixed BG & D Compression Tool
The K425BG is a hand operated mechanical compression tool fitted with a permanent 5/8 and D die grooves. This tool is designed for the compression of sleeves, lugs and H-frame parallel groove connectors. The K425BG accepts Burndy style W type dies that clip into place over the rear D die groove. Constructed with curved fiberglass handles, this tool delivers 9,000 lbs of crimping force.
Lever Handle Compression Tool
www.linestar.ca
• Designed for live line crimpling of sleeves and connectors • 1-1/2” diameter
Part # Crimp Head Style Description 12593 Utilizes Burndy and Husky tool “W” Dies Head Also Has A Fixed 5/8” Nose Die 12594 Utilizes Burndy and Husky tool “W” Dies Head Also Has A Fixed 5/8” Nose Die
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
Ft. Lbs. Case 5 10 7220-5 6
• • • •
10.5 7220-6
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
187
IL-ND 6 Ton Battery Powered Streamline Compression Tool Specifications Output Weight Size
6 Ton 7.3 lbs. with Battery 3.37”L x 3.1”W x 21”H
compression tools
huskie battery operated crimperS
CUTTING estimates BP-80 4/0-4/0 H-Tap 100
Connector Range Lugs and Splices #8-500 MCM Cu #8-350 MCM Al H-Taps Up to 4/0-4/0
FEATURES • • • • •
Lightweight ergonomic design One Hand Operation Tested up to 75kV Compatible with all Huskie 14.4V Batteries 3 Year Warranty
The newly develoiped IL-ND steamline tool was designed as an upgrade to the ECO-EZ tool giving the user a more robust product with a true 3 year life cycle. Enhancements to the hydaulic system, a more robust heavy duty motor similar to the “SL” tool as well as a re-designed compression lead that utilizes less hydraulic force while delivering a 6 ton output compression force, are just a few of the design implementations used in this new series. We have also added a rubber overmold to the housing that will allow the operator better tool control with the non-slip grip, as well as an updated aesthetic look, separating it from the competition.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
compression tools
188
Huskie Battery Operated CRIMPERS sl-nd 6 Ton Streamline Crimping Tool with Changeable Head Accepts “W”, “O” and “X” Type Dies
Specifications Output Weight Size
6 Ton 8.2 lbs. with Battery 3.7”L x 22”H x 2.8”W
Crimping Estimates BP-84 4/0-4/0 H-Tap 200
Connector Range Lugs and Splices H-Taps
#8-500 MCM Cu #8-350 MCM Al Up to 4/0-4/0
Cutting Capacities with SLCUT-JAW ACSR Up to 4/0 Standard Guy Wire 3/8” Soft Locks 3/8” Soft Steel Bolts 3/8”
FEATURES • • • • • • • • • • •
Forged Jaws for Long Life Brush Protection Guards New Pull-Pin Design for Quick Jaw Change Bright White, LED Lights for Working in Low Light Conditions 6 Compression Heads to Choose From 3 Cutting Heads to choose from One Hand Operation Rotational Head Audible Bypass when Predetermined Pressure is Achieved Tested Up To 75kV 5 Year Warranty on Tool, Battery & Charge
www.linestar.ca
OPTIONAL ACCESSORIES 10 JawTypes to Choose From
The SL-ND was developed after listening to feedback from of our customers for a more robust, higher-quality, streamline tool. This new tool platform is the culmination of almost three years of research and development and will stand up to the most demanding tasks that linemen face every day. The SL-ND has a choice of jaw types, including six compression heads, the SLXPJ-JAW, SLXMJ-JAW, SLK-JAW, SLND3-JAW, SLO-JAW, or SLBG-JAW. For cutting, switch to the SLCUT-JAW, SL-CHCUAL, or SL-CHACSR, and for bending, use the SLCB-JAW. Quickly change between head types with the pull-pin design. No need for another battery system, as this tool operates on the same 14.4 volt battery used in all of the battery operated tools. The SL-ND Streamline tool not only carries a 5 year warranty on the tool but on the battery and charger as well. SL-HLSTR
Optional Accessories SL-HLSTR Huskie Tools Holster Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
171 189
1256-G
compression tools compression tools
HoT STICk FoR HUSkIE AnD hot stick for BATTERy huskie and GREEnLEE In-LInE TooLS greenlee in-line battery tools
1256-H
Battery tool installs quickly and easily on stick • • • • • • • • •
6’ and 8’ lengths. For overhead and underground use. Battery tool can be used in multiple positions with universal head 0, 30, 60, and 90 degrees. Simply push lever to activate tool. Pull to release. For use on voltages up to 69KV. Fiberglass stick is tested at 100KV per foot. Weights shown below are for the stick only and do not include the battery tool. Husky and Greenlee tools shown are not included.
100%
Canadian 100% Owned Canadian Owned
www.linestar.ca www.linestar.ca
British Columbia: phone: 604-594-2701 • fax: 604-594-2751 Alberta: phone: 403-243-1900 •
[email protected] phone: 403-243-1900 • fax: 403-243-2063 British Columbia: phone: 604-594-2701 •
[email protected] Saskatchewan/Manitoba: phone: 204-783-9771 • fax: 204-783-8951 Manitoba: phone: 204-783-9771 •
[email protected] Ontario: phone: 905-564-5344 •
[email protected]
compression tools
190
Huskie Battery Operated CRIMPERS SL-CB ROBO*BEND™ Streamline Cable Bending Tool Specifications Weight Size
12 lbs. with Battery 7”L X 14”W X 22”H
Bending Estimates Consult Factory
Bending Capacity Cable
1000 MCM Cu For Larger Cable, Consult Factory
FEATURES • New pull-pin design for quick jaw change • Bright white, LED Lights for working in low light conditions • Audible bypass when predetermined Pressure is achieved • Tested up to 75kV • Comes with 2 batteries, AC charger & case • 5 Year warranty on tool, battery & charger
www.linestar.ca
Huskie Tools is pleased to introduce the SL-CB, the first of its kind in the electrical utility industry, is a battery powered cable bender. The SL-CB utilized the pull-pin design, allowing technicians to change jaws from compression, to cutting, to cable bending. The SL-CB is just one of the many ergonomic solutions, provided by Huskie Tools, to help reduce strains and sprains associated with the daily tasks of a powerline technician. The SL-CB has several different settings, so the tool can be used on either secondary or primary conductor in a variety of sizes. Featuring a low profile, the SL-CB can be used in a variety of close-quarter environments; such as underground vaults, meter bases and substation applications and wherever cable bending is required. NOTE: Contact cable manufacturer for specified cable bending radii and cable bending requirements.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
191 compression tools
huskie battery operated crimperS REC-6NDSL 6 Ton Compression Tool with Changeable Head and 1-3/8” Jaw Opening Accepts “W”, “O” and “X” Type Dies
Specifications Output Weight Size
6.2 Ton 9.8 lbs. with Battery 14.3”L x 10”H x 3.1”W
Crimping Estimates BP-84 #6 Cu/Al 250 1/0 Cu/Al 200 4/0 Cu/Al 150
Connector Range Lugs and Splices H-Taps
#8-500 MCM Cu #8-350 MCM Al Up to 4/0-4/0
Cutting Capacities with SLCUT-JAW ACSR Up to 4/0 Standard Guy Wire 3/8” Soft Locks 3/8” Soft Steel Bolts 3/8”
FEATURES • • • • • • • • • •
Rapid Advance 6 Compression Heads to Choose From 3 Cutting Heads to Choose From Brush Protection Guards New Pull-Pin Design for Quick Jaw Change One Hand Operation Tested Up to 75kV Rotational Head Forged Jaws for Long Life Ergonomically designed for Balance and Grip • Weather Resistant Housing • Audible Bypass when Predetermined Pressure is Achieved • 5 Year Warranty on Tool, Battery & Charger
phone: phone: phone: phone:
In addition to the rapid advance feature incorporated into the new REC-6NDSL, it also has an electronic counter that allows a service technician to read the number of compression cycles. Also, the tool housing has been reinforced to improve durability during heavy field use.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
The REC-6NDSL has a choice of jaw types, including six compression heads, the SLXPJ-JAW, SLXMJ-JAW, SLK-JAW, SLND3-JAW, SLO-JAW, or SLBG-JAW. For cutting, switch to the SLCUT-JAW, SL-CHCUAL, or SL-CHACSR, and for bending, use the SLCB-JAW. Quickly change between head types with the pull-pin design. No need for another battery system, as this tool operates on the same 14.4 volt battery used in all of the battery operated tools. The SL-ND Streamline tool not only carries a 5 year warranty on the tool but on the battery and charger as well.
compression tools
192
huskie battery operated crimperS REC-B658U 6 Ton Compression Tool with 1.8” Jaw Opening Accepts “W”, “O” and “X” Type Dies
Specifications Output Weight Size Jaw Opening
6 Ton 8.2 lbs. with Battery 14.3”L x 10”H x 3.1”W 1.8”
Crimping Estimates BP-80 #6 Cu/Al 250 1/0 Cu/Al 195 4/0 Cu/Al 150
Connector Range Lugs and Splices H-Taps
#8-500 MCM Cu #8-300 MCM Al Up to 4/0-4/0
25CAT Optional Cutter Head
optional accessories 25CAT HT58CUT RCB-358N
Cutter Head Cutter Die Insulated Jaw
FEATURES One Hand Operation Tested Up to 75kV Rotational Head Rapid Advance Ergonomically Balanced Ergonomic Pistol Grip Handle Weather Resistant Housing Audible Bypass when Predetermined Pressure is Achieved • Interchangeable Cutter Head • 5 Year Warranty on Tool, Battery & Charge
www.linestar.ca
• • • • • • • •
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
The REC-B658U was designed to squeeze commonly used service entrance connectors, including lugs, sleeves, H-Taps and C-Taps. The rapid advance feature allows the operator quicker compression cycles. In addition to the rapid advance feature, it also has incorporated an electronic counter that will allow a service technician to read the number of compression cycles the tool has made. Also, the new tool housing has been reinforced to improve durability during heavy field use. A factory pre-set bypass cartridge assures a six ton compression every time. The REC-B658U accepts either “W”, “O” or “X” type dies. The D3 nest die comes standard with the tool. Always consult your connector manufacturer for proper die/connector combinations. The REC-B658U will accept the optional 25CAT cutter head attachment. Quick release pins allow the operator to change between compression and cutter head in one minute with no springs or pins to lose.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
193 compression tools
huskie battery operated crimperS REC-BCN658 6 Ton Compression Tool with .95” Jaw Opening Accepts “W”, “O” and “X” Type Dies
Specifications Output Weight Size Jaw Opening
6 Ton 10.65 lbs. with Battery 16”L x 10”H x 3.1”W .95”
Crimping Estimates BP-80 #6 Cu/Al 250 1/0 Cu/Al 190 4/0 Cu/Al 150
Connector Range Lugs and Splices H-Taps
#8-500 MCM Cu #8-300 MCM Al Up to 4/0-4/0
The REC-BCN658 is an open jaw version of the REC-658U latched-type tool. The open jaw can easily fit into tight situations where the closing of a jaw latch would be a problem. The jaw is covered with a rubber boot designed to provide some insulated protection against “brush” contact with energized cables. The tool should not be used as an insulated tool since the dies and die holding pins are always exposed.
optional accessories HT58CUT
Cutter Die
FEATURES • • • • • • • •
One Hand Operation Tested Up to 75kV Rotational Head Rapid Advance Ergonomically Balanced Ergonomic Pistol Grip Handle Weather Resistant Housing Audible Bypass when Predetermined Pressure is Achieved • Open C-Head Design • 5 Year Warranty on Tool, Battery & Charge
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
The head can be turned 180° and positioned to accommodate the operator’s work methods. A complete cycled compression is accomplished by the simple squeeze of a trigger. A factory preset by-pass cartridge assures a complete compression every time. Its 6-ton output is equal to any comparable handheld, hydraulic compression tool and far exceeds any mechanical crimper. The REC-BCN658 is supplied with D3 nest dies, which can be interchanged with Kearney, or T&B “O” type dies. If you wish to use the Huskie or another brand of “W” type dies, simply slide them over the D3 nest dies and snap in position. The output pressure, of the REC-BCN658 can be checked with the PG-15 pressure gauge when necessary.
194 compression tools
huskie battery operated crimperS SL-510 12 Ton Streamline Compression Tool Accepts “U” Type Dies
Specifications Output Weight Size
12 Ton 12.2 lbs. with Battery 19”L x 4.75”H x 3.9”W
Crimping Estimates BP-80 4/0 Cu 90 500 MCM Cu 60
Connector Range Lugs and Splices
Up to 750 MCM Cu/Al
FEATURES • • • • • • • • •
12 Ton Streamline Tool One Hand Operation Tested Up to 75kV Rotational Head Rubber Boot on Compression Head Rapid Advance Ergonomically Balanced Weather Resistant Housing Audible Bypass when Predetermined Pressure is Achieved • 5 Year Warranty on Tool, Battery & Charger
The SL-510 is built on a similar platform as our SL-ND tool, the most robust and versatile streamline tool in the industry. The new SL-510 will deliver 12 tons of compression force, utilizing all industry standard “U” dies. The capacity of the tool is the same as the pistol grip REC-6510, capable of accepting lugs up to 750MCM, and splices up to 600 MCM.
www.linestar.ca
Utilizing the streamline design and replacing the traditional “C” head with a smaller, lightweight, latched head design makes the new SL-510 the lightest 12 ton tool on the market today. The new housing design incorporates a rubber over-mold handle grip area allowing the operator better tool control.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
195 compression tools
huskie battery operated crimperS SL-C610 15 Ton Streamline Compression Tool
Specifications Output Weight Size Jaw Opening
15 Ton 20 lbs. 23” L x 4.5”W x 3.5” H 2” (1.5” w/ “U” Die Adapter)
Crimping Estimates BP-84 1000 MCM Cu 50
Connector Range Aluminum Copper
#8-AWG-1250 MCM #8 AWG-1500 MCM
FEATURES • • • • • •
Open C Head Design Rotational Head Protective Rubber Boot on Head Rapid Advance Weather Resistant Housing Audible Bypass when Predetermined Pressure is Achieved • 5 Year Warranty on Tool, Battery & Charger The SL-C610 is built on a similar platform as our SL-ND tool, the most robust and versatile streamline tool in the industry. The new SL-C610 will deliver 15 tons of compression force, utilizing all industry standard “P” dies. The capacity of the tool is the same as the REC-3610, capable of accepting lugs up to 1500MCM copper and 1250MCM Aluminum. The new housing design incorporates a rubber over-mold handle grip as well an optional handle allowing the operator better tool control.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
compression tools
196
huskie battery operated crimperS REC-3410 ROBO* CRIMP™
12 Ton Compression Tool with 1” Jaw Opening Accepts “U” Type Dies
SPECIFICATIONS Output Weight Size Jaw Opening
12 Ton 19 lbs. with Battery 18”L x 10.5”H x 3.5”W 1”
CUTTING ESTIMATES BP-80 4/0 Cu 90 500 MCM Cu 60
CONNECTOR RANGE Lugs Splices • • • • • • • • • •
#8 AWG - 750 MCM Cu #10 AWG - 750 MCM Ai #8 AWG - 400 MCM Cu #10 AWG - 400 MCM Ai
FEATURES
Tested up to 75kV Rotational head Rapid advance Ergonomically balanced Weather resistant housing Audible bypass when predetermined pressure is achieved Includes die-case Protective rubber bott on “c” head for brush contact Comes with 2 batteries, AC charger & case 5 year warranty on tool, battery & charger
new
SL-C510
12 Ton Streamline Compression Tool
SPECIFICATIONS Output Weight Length Jaw Opening
www.linestar.ca
750 MCM Cu 750 MCM Cu
Alberta: British Columbia: Manitoba: Ontario:
The REC-3410 is faster and more compact than our previous model. It offers a wide handle opening with finger grooves, allowing easier access for gloved work. The base of the tool is contoured for stability and incorporates finger grooves for a better grip.
The SL-C510 is built on a similar platform as our SL-ND tool, the most robust and versatile and streamline tool in the industry. The new SL-C510 will deliver 12 tons of compression force, utilizing all industry standard “U: dies. The capacity of the tool is the same as the pistol grip REC-6510, capable of accepting lugs up to 750MCM, and splices up to 750 MCM. Utilizing the streamline design, “C” head opening of 1.65 is just right for your tool task. The new SL-C510 the lightest 12 ton tool on the market today. The new housing design incorporates a rubber over-mold handle grip area allowing the operator better tool control.
12 Ton 14.9 lbs. 12-1/4” 1.65”
CONNECTOR RANGE Lugs Splices
Huskie Tools is giving you more tool speed and easier handling with our REC-3410 battery powered compression tool. It features a rubber boot and it is designed to accommodate all 12 ton “U” type dies widely used throughout the electrical industry.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
197 compression tools
huskie battery operated cRIMPERS REC-6430
12 Ton Compression Tool with 1-3/16” Jaw Opening Accepts “U” Type Dies
SPECIFICATIONS Output Weight Size Jaw Opening
12 Ton 11.25 lbs. 16.9”L x 11.1”H x 3.3”W 1-3/16”
CRIMPING ESTIMATES BP-80 500 MCM Cu 60 750 MCM Cu 45
CONNECTOR RANGE Lugs Splices • • • • • • • •
750 MCM Cu/Al 600 MCM Cu/Al
FEATURES
One Hand Operation Tested Up to 75kV Rotational Head Rapid Advance Ergonomically Balanced Ergonomic Pistol Grip Handle Weather Resistant Housing Audible Bypass when Predetermined Pressure is Achieved • Protective Rubber Boot on “C” Head For Brush Contact • 5 Year Warranty on Tool, Battery & Charger
The REC-6430 weighing just 11.25 pounds (3 lbs. less than the 5 Series, REC-3430) was specifically designed for use in single-handed operation in overhead applications such as cable trays. This allows one hand to control the work while the other hand is free to operate the tool. It also eliminates the cumbersome hoses and larger, heavier tools traditionally used in overhead work. The REC-6430 accepts all 12 ton “U” type dies and is capable of 750 MCM copper lugs and 600 MCM copper splices.
SL-610
15 Ton Streamline Compression Tool SPECIFICATIONS Output Weight Size Jaw Opening
FEATURES
15 Ton Streamline Tool Tested Up to 75kV Rotational Head Protective Rubber Boot on Head Rapid Advance Flip-Top Rotating Head Weather Resistant Housing Audible Bypass when Predetermined Pressure is Achieved • 5 Year Warranty on Tool, Battery & Charger Alberta: British Columbia: Manitoba: Ontario:
The SL-610 is built on a similar platform as our SL-ND tool, the most robust and versatile streamline tool in the industry. The new SL-610 will deliver 15 tons of compression force, utilizing all industry standard “P” dies. The capacity of the tool is the same as the REC-3610, capable of accepting lugs up to 1500MCM copper and 1250MCM Aluminum. Utilizing the streamline design and replacing the traditional “C” head with a smaller, lightweight, latched head design makes the new SL-610 the lightest 15 ton tool on the market today. The new housing design incorporates a rubber over-mold handle grip as well as optional handle allowing the operator better tool control.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
• • • • • • • •
15 Ton 16.5 lbs with Battery 25”L x 4”H x 5”W 2”
198 compression tools
Huskie Battery Operated CRIMPER REC-3510 ROBO*CRIMP™ 12 Ton Compression Tool with 1.65” Jaw Opening Accepts “U” Type Dies
Specifications Output 12 Ton Weight 20 lbs. with Battery Size 19”L x 10.5”H x 3.5”W Jaw Opening 1.65”
CUTTING estimates BP-80 500 MCM Cu 60 750 MCM Cu 45
Connector Range Lugs and Splices
750 MCM Cu/Al
features • • • • • • • •
www.linestar.ca
• • •
Tested up to 75kV Rotational head Rapid advance Ergonomically balanced Weather resistant housing Audible bypass when predetermined pressure is achieved Includes die-case Protective rubber boot on “C” head for brush contact UL classified Comes with 2 batteries, AC charger & case 5 year warranty on tool, battery & charger
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
The REC-3510 is the largest in our line of battery operated 12 ton compression tools. The jaw opening is 1.65” and will accept mid-span copper and aluminum splices and lugs up to 750 MCM Cu/Al. When the sleeves are compressed they can be removed through the large jaw. This tool accepts all “U” type dies available on the market. A built-in, preset 10,000 psi bypass cartridge will audibly bypass when optimal pressure is achieved. Test dies accompanied with our PG-4 can confirm the output pressure when needed. The output pressure can be adjusted via a bypass port located at the top of the tool. This tool has the most universal range of all our selfcontained ROBO* tools.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
199
compression tools
huskie battery operated crimperS
REC-6510 12 Ton Compression Tool with 1.65” Jaw Opening Accepts “U” Type Dies
Specifications Output 12 Ton Weight 15.9 lbs. with Battery Size 17.8”L x 11.1”H x 3.3”W Jaw Opening 1.65”
CUTTING estimates BP-84 4/0 Cu 90 500 MCM Cu 60
Connector Range Lugs and Splices Up to 750 MCM Cu/Al
features • • • • • • • •
One Hand Operation Tested Up to 75kV Rotational Head Rapid Advance Ergonomically Balanced Ergonomic Pistol Grip Handle Weather Resistant Housing Audible Bypass when Predetermined Pressure is Achieved • Protective Rubber Boot on “C” Head For Brush Contact • 5 Year Warranty on Tool, Battery & Charger
phone: phone: phone: phone:
The REC-6510 has the same jaw opening as our REC-3510 battery operated 12-ton compression tool. The opening is 1.65” which will accept mid-span copper and aluminum splices and lugs up to 750 MCM Cu/Al. This tool accepts all “U” type dies available on the market. Portability and handling are made easier because the REC-6510 system is self- contained and compact. The new rapid advance system reduces tool run time, giving you more crimp cycles per battery charge. A built-in, pre-set 10,000 psi bypass cartridge will audibly “bypass” when the optimal pressure is achieved.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
The REC-6510 was specifically designed for use in single-handed operation in overhead applications such as cable trays. This allows one hand to control the work while the other hand is free to operate the tool. It also eliminates the cumbersome hoses and larger, heavier tools traditionally used in overhead work.
200 compression tools
Huskie Battery Operated CRIMPER REC-3610 ROBO*CRIMP™ 15 TonCompression Tool with 2” Jaw Opening Accepts “P” Type Dies
Specifications Output 15 Ton Weight 24 lbs. with Battery Size 21.5”L x 10.5”H x 3.5”W Jaw Opening 2”
CUTTING estimates BP-80 1000 MCM Cu 40
Connector Range Aluminum Copper H-Tap
#8 AWG-1250 MCM #8 AWG-1500 MCM Up to 750/750
FEATURES • • • • • •
www.linestar.ca
• • • • • •
Tested up to 75kV Rotational head Rapid advance Ergonomically balanced Weather resistant housing Audible bypass when predetermined pressure is achieved Includes die-case Protective rubber boot on head Flip-top rotating head External pressure adjustment Comes with 2 batteries, AC charger & case 5 year warranty on tool, battery & charger
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
The REC-3610 is our 15 ton compression tool that is able to crimp splices and lugs up to 1250 MCM aluminum and 1500 MCM copper. The REC-3610 offers a wide handle opening with finger grooves, allowing easy access for gloved work. The base of the tool is contoured for stability and incorporates finger grooves for a better grip. The tool has a latched head and its pull-out release pin cannot be entirely removed from the jaw. The jaw opens wide to accept all “P” type dies used in the industry today. The PU-15 die adapter is available for use with all 12 ton “U” type dies.
optional accessory PU-15
403-243-1900 604-594-2701 204-783-9771 905-564-5344
“U” Die Adapter,
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
CT10 Compression Tool
CT15036UN Compression Tool
Available in 2 models, these tools provide up to 12 tons of force. Operating pressure is between 1,650 to 2,500 and the flow rate is 3-9 gpm. Order couplers separately.
201 compression tools
low-pressure hydraulic compression tools
This tool produces 15 tons of force which crimps copper up to 500 MCM, aluminum to 1500 MCM and ACSR to 795. It operates at 1,650 to 2,500 psi with a flow rate of 3-9 gpm. Order die adapters and couplers separately.
Part # Head Type Capacity CT10016N Burndy Y-35 500 Cu / 636 Alum 556.5 ACSR CT10066AN Burndy Y-750 500 Cu / 1,500 Alum 795 ACSR
33704 60837 100096
U-Die Adapter P-Die Adapter PH4/PH14 Adapter
LPK1240 Compression Tool
This tool has a 1.65” jaw opening that accepts U-Dies and develops 12 tons of force. It has a powered advance and retract feature and the relief valve signals the operator when the cimp is complete. Operating pressure is between 1,500 to 2,000 psi with a flow rate of 3 - 9 gpm and weighs 19.7 lbs. Order couplers separately.
LPK1550 Compression Tool
Designed to make crimps on 500 MCM cable and larger, this tool provides 15 tons of force. It’s operating pressure is 1,500 to 2,000 psi with a flow rate of 3 - 9 gpm and weighs 28.6 lbs. Order die adapters and couplers separately.
48802 U-Die Adapter 48820 P-Die Adapter 48824 PH4/PH14 Adapter
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
All of these hydraulic tools can be supplied assembled with couplers and hoses ready for field use. Call Linestar for more information.
compression tools
202
high-pressure hydraulic compression tools EP-410H 12 Ton Remote Compression C-Head with Rubber Boot – 1” Jaw Opening Accepts “U” Type Dies
Specifications Output Weight Length Jaw Opening
12 Ton 8-1/4 lbs. 10” 1”
The EP-410H is a traditional C-head with a one-inch jaw opening. It will accept all “U” type dies currently used in 12 ton tools on today’s market. A 10,000 psi external pump is required to operate the C-head. The output pressure is 12 tons when the pump is set at 10,000 psi. After a compression is made on a lug or sleeve, an internal ram spring retracts the jaw when the pump pressure is relieved. The tool is supplied with a standard 3/8” male, screw type coupler but can be fitted with an opposite female coupler if requested. Carrying case included.
Connector Range Lugs Splices
#8-750 MCM Cu #10-400 MCM Cu
Feature • Protective Rubber Boot on “C” Head
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
U-Type Dies
EP-430 12 Ton Compression Tool with Rubber Boot – 1-3/16” Jaw Opening
Accepts “U” Type Dies
Specifications Output Weight Length Jaw Opening
www.linestar.ca
The EP-430 is unique in that it has a large jaw opening of 1-3/16” and is able to splice up to 600 MCM. This tool was designed for the electrical contractor or electric utility lineman who is confronted with larger cable diameters and larger connectors. Similar competitive tools are limited to a .95” jaw opening that drastically reduces their connecting range. Most internal hydraulic components are the same as the EP-410 and EP-510. A carrying case is included.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
12 Ton 13.5 lbs. 24” 1-3/16”
Connector Range Lugs Splices
Up to 750 MCM Cu Up to 600 MCM Cu
Features • Protective Rubber Boot on “C” Head • External Pressure Adjustment
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
EP-410HT 12 Ton Remote Titanium Compression C-Head – 1” Jaw Opening Accepts “U” Type Dies
Specifications Output Weight Length Jaw Opening
12 Ton 5 lbs. 10” 1”
Connector Range Lugs Splices
#8-750 MCM Cu #10-400 MCM Cu
Optional Accessories HTADPT
Hot Stick Adapter
Features • Extremely Lightweight Titanium • Ideal for Hot Stick Applications • All the Same Features as the EP-410H Model
203 compression tools
high-pressure hydraulic compression tools
The unique, lightweight titanium head of the EP-410HT reduces its weight to just five pounds. This is an ideal weight for Hot Stick handling since it is easy to lift and effortless to control while making connections. Though more expensive than conventional 12 ton tools, operator preference and performance when handling this tool will save time and investment over the life of the product. The tool is supplied with a standard 3/8” male, screw type coupler but can be fitted with an opposite female coupler if requested. A carrying case is included. NOTE: When using any of these high-pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
EP-510HC 12 Ton Remote Compression C-Head with Rubber Boot – 1.65” Jaw Opening Accepts “U” Type Dies
Specifications
The EP-510HC is a remote C-head that requires an external 10,000 psi pumping source. It accepts all “U” type dies used with conventional 12 ton compression tools. The larger jaw opening of 1.65” accepts conductors and mid-span sleeve connections up to 750 MCM. The EP-510HC is supplied with a screw type, 3/8” male coupler, metal carrying case, and die tray. We recommend the use of our nonconductive high pressure hose.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
Connector Range Lugs Splices
750 MCM Cu 750 MCM Cu
Feature
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
phone: phone: phone: phone:
12 Ton 11 lbs. 12-1/4” 1.65”
• Protective Rubber Boot on “C” Head
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
Alberta: British Columbia: Manitoba: Ontario:
Output Weight Length Jaw Opening
compression tools
204
high-pressure hydraulic compression tools EP-610H 15 Ton Remote Compression C-Head – 2” Jaw Opening Accepts “P” Type Dies
Specifications Output 15 Ton Weight 14.5 lbs. Length 14.5” Jaw Opening 2” (1.5” with “U” Die Adapter)
Connector Range Aluminum Copper
#8 AWG-1250 MCM #8 AWG-1500 MCM
Feature • Also Available for T&B Style 15 Ton Dies (Model EP-610TB)
The EP-610H is a remote C-head that requires an external 10,000 psi pumping source. It accepts all Huskie HT61 series and Burndy “P” type dies used in the Y-46. When used with a Huskie PU-15 die adapter it will accept all “U” type dies used with any 12 ton tool. This tool is primarily used for cables above 750 MCM or in cases where additional tonnage is required to compress larger lugs, terminals and sleeves on tension connections. It is most always used on larger underground cables up to 1000 MCM. The EP-610H is supplied with a 3/8” male, screw type coupler and carrying case. NOTE: When using any of these high-pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
PU-15 “U” Die Adapter Sold seperately
Optional Accessory PU-15
“U” Die Adapter
EP-100WD/EP-200WA Double-Acting, 100 and 200 Ton Compression Head Specifications EP-100WD Output Weight Size Die Style Ram Stroke Oil Volume
EP-200WA
100 Ton 200 Ton 96 lbs. 190 lbs. 7-1/2”W x 14”H 14”W x 17”H HA100-Series HA200-Series .98” Travel 1.57” Travel 314 cc 1134 cc
www.linestar.ca
FeatureS • Designed for Full Tension Transmission and Substation Connections • Double Acting Hydraulic Cylinder for Quicker Return Times • Lightest Weight Models in Their Class • Removable Die Cap for Easy Cable Insertion
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
The EP-100WD and EP-200WA are 100 and 200 ton compression heads for full tension, transmission and substation connections and require an external 10,000 psi pumping source. The EP-100WD will accept shell-type dies currently used with Alcoa 100 ton compression heads. Dies for 200 ton presses are considered special application and must be engineered to the connector manufacturers specifications. Consult factory for these dies. Both compression heads are double acting and designed to operate from Huskie Tools pump models R14EAD, HPG-4 or any 3/4 HP high-pressure, double acting pump with the proper oil capacity. Double acting means hydraulically advancing the ram to build proper tonnage, then the hydraulic pressure is reversed to retract the ram. This will eliminate all possibilities of the connector hanging up or the tool jamming. The EP-200WA is the only 200 ton press on the market today and both are the lightest weight models in their class. Both models have removable die caps for easy connector positioning and 3/8” screw-type couplers. NOTE: When using any of these high-pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
EP-60D (Steel), EP-60DT (Titanium) 60 Ton Double Acting Compression Head Accepts “HA60-SERIES” Type Dies
Specifications
205 compression tools
high-pressure hydraulic compression tools
Output 60 Ton Weight 47 lbs. (Steel) 34 lbs. (Titanium) Size 6”W x 17”H Cable Capacity 2.4” O.D. Die style HA60-Series Ram Stroke 1.5” Travel Oil Volume 303 cc
Connector Range Lugs Splices
Up to 2000 MCM Cu/Al Up to 2500 MCM Cu/Al
The EP-60D series is a double acting model. Double acting tools will eliminate the possibility of the tool jamming. Double acting means hydraulically advancing the ram to build the proper tonnage, then the hydraulic pressure is reversed to retract the ram. This will ensure the ram to retract without having to pry the jaws apart to release them and it will also retract much faster than single acting spring release tools.
Order Data EP-60D EP-60DT
60 Ton Double Acting Compression Head Titanium Model
Features • Designed for ACSR & ACAR Transmission and Distribution Cable • Double Acting Hydraulic Cylinder for Quicker Return Times • Ultra Light Titanium Model Available • Extremely Portable
Titanium has the strength of steel but weighs nearly 30% less. Due to its lighter weight and the tool’s portable design, the chance of back and muscle strain is greatly reduced. The titanium 60 ton press is easily maneuvered where heavy steel presses are almost impossible to operate making it an ideal tool for jobs such as helicopter line installations. NOTE: When using any of these high-pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
EP-60W 60 Ton Compression Tool This single acting tool accepts Alcoa 60 Ton series dies and Burndy “L” type dies. It operates with most 10,000 psi hydraulic power sources.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
L-Type Dies
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
60 Ton Series Dies
compression tools
206
compression dies & adapters
O-Dies
W-Dies
U-Dies
Used in the Kearney O series compression tools.
Used in MD6, MD7 and other similar 6 ton compression tools.
Used in Y-35, Y-39, Y-750 and other similar 12 ton and 14 ton tools.
WCSA Compression Dies
UCSA Compression Dies
P-Dies
Used in MD6, MD7 and all Huskie 6 ton compression tools.
Used in Y-35 and all Huskie 12 ton compression tools.
Used in the Y-46 and other similar 15 ton compression tools.
HT50CUT Cutting Die
PU-15 U-Die Adapter
PT6515 U-Die Adapter
Fits MD6, MD7 and other similar 6 ton compression tools. Capacity # 4 to 4/O ACSR.
Allows the use of U-Dies in the Y-46 and other similar 15 ton compression tools.
Allows the use of U-Dies in the Y-45 and other similar 15 ton compression tools.
L-Type Dies
100 Ton Dies Used in EP100WB and other similar 100 ton compression tools.
6000 Ton Series Dies
www.linestar.ca
60 Ton Dies Used in EP060D and other similar 60 ton compression tools.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
207 compression tools
compression dies HT58-SERIES Equivalent to Burndy “W” Type Dies for 4-6 Ton Tools features • Fits All Existing Tools Accepting “W” Type Dies • Marked with Huskie and Equivalent Burndy “W” Die Number • Nickel Plated
ITEM # BURNDY ITEM # BURNDY Equivalent Equivalent HT58AE W-K840 HT58BX W-161 HT58BZ W-162 HT58CB W-163 HT58CD W-164 HT58CE W-165 HT58CF W-166 HT58CG W-167 HT58CM W-171 HT58G W-BG HT58J W-C HT58AK W-O HT58CUT CUTTER
HT58DE HT58DG HT58DH HT58DK HT58DM HT58DP HT58DT HT58DV HT58DW HT58DY HT58KA HT58KH HT58AF HT58K
W-236 W-238 W-239 W-241 W-243 W-245 W-247 W-248 W-249 W-251 W-687 W-702 W-L WKK
HT-SERIES Equivalent to Kearney “O” Type Dies for 4-6 Ton Tools
features • Fits All Existing Tools Accepting “O” Type Dies • Stamped with Kearney Die Size • Nickel Plated
ITEM # BURNDY Equivalent HT58AW HT58AU HT58AT HT58AY HT58AZ HT58BA HT58BC HT58BE HT58BF HT58BJ HT58BK HT58BL
BURNDY 6 NICOPRESS TON DIE
HT58BX W-161 HT58BZ W-162 HT58CB W-163 HT58CM W-171
J M&P T X
ITEM # CSA Equivalent HT58PA HT58PB HT58PC
CSA-20 CSA-22 CSA-24
ITEM # kearney ITEM # kearney Equivalent Equivalent HT-B HT-D HT-D3 HT-J HT-K HT-O HT-P HT-T HT-737 HT-781 HT-840 HT-845
B D D3 J K O P T 737 781 840 845
HT-510 HT-635 HT-747 HT-316 HT-14 HT-516 HT-38 HT-12 HT-916 HT-1932 HT-58-1 HT-1116
510 (HEX) 635 (HEX) 747 (HEX) 3/16 1/4 5/16 3/8 1/2 9/16 19/32 5/8-1 11/16
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
CSA-20 CSA-22 CSA-24
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
ITEM # CSA Equivalent HTCSA-20 HTCSA-22 HTCSA-24
Alberta: British Columbia: Manitoba: Ontario:
W-2CRT W-4CRT W-5CRT W-25RT W-26RT W-27RT W-28RT W-29RT W-30RT W-31RT W-32RT W-34RT
6 TON DIE
compression tools
208
compression dies HT41-SERIES
features
Equivalent to Burndy and Kearney “U” Type Dies for 12 Ton Tools
• Fits All Existing Tools Accepting “U” Style Dies • Marked with Huskie and Equivalent Burndy “U” Die Number, or Alcoa “B” Die Number, or Kearney Die Size • Die Nest Engraved with Huskie Die Number Suffix
ITEM # alcoa ITEM # alco Equivalent Equivalent
ITEM # csa ITEM # csa Equivalent Equivalent
HT4107 HT4108 HT4109 HT4111 HT4120 HT4128 HT4129 HT4130
HT41PA HT41PB HT41PC HT41PD HT41PE HT41PF HT41PL HT41PG
74SH-03SH 75SH-05SH 76SH 11AH 20AH-14AH 74AH-10AH 75AH-12AH 76AH
HT4131 HT4132 HT4140 HT4141 HT4142 HT4155 HT4156 HT4180
72AH 73AH-08AH 07CD 08CD 09CD 72SH-01SH 73SH 13AH-80EA
CSA-20 CSA-22 CSA-24 CSA-26 CSA-28 CSA-30W CSA-20CU CSA-22CU
HT41PH HT41PI HT41PJ HT41PK HT41PM HT41PN
CSA-24CU CSA-24CU CSA-28CU CSA-30WCU CSA-1 CSA-2
www.linestar.ca
ITEM # BURNDY ITEM # BURNDY ITEM # BURNDY ITEM # BURNDY Equivalent Equivalent Equivalent Equivalent HT41G U-BG HT41J U-C HT41V U-D HT41X U-D3 HT41Y U-E HT41Z U-F HT41AB U-H HT41AF U-L HT41AG U-M HT41AJ U-N HT41AK U-O HT41AM U-R HT41BX U-161 HT41BZ U-162 HT41CB U-163 HT41CD U-164 HT41CE U-165 HT41CF U-166 HT41CG U-167 HT41CJ U-168 HT41CK U-169 HT41CL U-170 HT41CT U-203 HT41DE U-236 HT41DF U-237
HT41DG HT41DH HT41DL HT41DM HT41DP HT41DT HT41DV HT41DW HT41DY HT41DZ HT41EK HT41FG HT41FM HT41FN HT41FU HT41FX HT41GK HT41GX HT41HM HT41JM HT41JN HT41JP HT41JR HT41KJ HT41LG HT41NC HT41AE HT41AX HT41AW HT41AV HT41AU Alberta: British Columbia: Manitoba: Ontario:
U-238 U-239 U-242 U-243 U-245 U-247 U-248 U-249 U-251 U-252 U-261 U-305 U-316 U-317 U-321 U-327 U-373 U-468 U-490 U-654 U-655 U-658 U-659 U-705 U-788 U-997 U-K840 U1CRT U2CRT U3CRT U4CRT phone: phone: phone: phone:
HT41AT HT41AY HT41AZ HT41BA HT41BC HT41BE HT41GF HT41GM HT41GE HT41GL HT41BF HT41BJ HT41BK HT41BL HT41BM HT41BP HT41EX HT41EY HT41GW HT41EZ HT41FW HT41GZ HT41FA HT41HH HT41FB HT41HG HT41LJ HT41CUT HT41TEST
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
U5CRT U25RT U26RT U27RT U28RT U29RT U2CABT U4CABT U6CABT U8CABT U30RT U31RT U32RT U34RT U36RT U39RT U25ART U26ART U27ART U28ART U29ART U30ART U31ART U32ART U34ART U36ART U39ART2 Cutter Dies Test Dies
[email protected] [email protected] [email protected] [email protected]
HT41KA HT41KB HT41KC HT41KD HT41KE HT41KF HT41KG HT41KH HT41KI HT41KK HT41KL HT41KM HT41KN HT41KO HT41KP HT41KQ HT41KR HT41KS HT41KT HT41KU HT41KV HT41AE HT41U HT41KX
1/4 3/8 5/16 1/2 9/16 19/32 5/8-1 11/16 3/4 29/32 15/16 1-2 1-1/8-2 1-1/2-2 510 572 635 737 747 781 BKT 840 U 727
100%
Canadian Owned
209 compression tools
compression dies HT61-SERIES Equivalent to Burndy “P” Type Dies for 15 Ton Tools features • • • •
Fits All Existing Y46 Heads Accepting “P” Type Dies Marked with Huskie and Equivalent Burndy “P” Type Dies Black Oxide Finish Polished Die Nest
ITEM # BURNDY ITEM # BURNDY Equivalent Equivalent
ITEM # CSA Equivalent
HT61BP P39RT HT61BR P40RT HT61BU P44RT HT61BV P46RT HT61KX P-724 PU-15 DIE ADAPTER
HT61PF HT61PK HT61PO HT61PP HT61PQ HT61PR
HT61FC HT61HJ HT61FD HT61AC HT61AJ
HA60-SERIES
Equivalent to Alcoa 60 Ton Dies
P39ART P40ART P44ART PKR PN
CSA-30 CSA-30CU CSA-32 CSA-32CU CSA-34 CSA-34CU
features • Fits All Existing 60 Ton Presses Accepting 60 Ton Shell Type Dies • Marked with Huskie and Equivalent Alcoa Catalog Number • Black Oxide Finish
ITEM # alcoa ITEM # alcoa Equivalent Equivalent
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
6010SH 6012SH 6014SH 6016SH 6018SH 6020SH 6074SH 6075SH 6076SH 6020AH 6024AH 6027AH 6030AH 6034AH 6036AH 6038AH
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
HA60-27 HA60-28 HA60-29 HA60-30 HA60-40 HA60-41 HA60-42 HA60-43 HA60-44 HA60-45 HA60-46 HA60-47 HA60-48 HA60-49 HA60-50
6040AH 6074AH 6075AH 6076AH 6007CD 6008CD 6009CD 6010CD 6011CD 6012CD 6013CD 6014CD 6015CD 6016CD 6017CD
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
HA60-01 HA60-02 HA60-03 HA60-04 HA60-05 HA60-06 HA60-07 HA60-08 HA60-09 HA60-20 HA60-21 HA60-22 HA60-23 HA60-24 HA60-25 HA60-26
compression tools
210
compression dies HA100-SERIES Equivalent to Alcoa 100 Ton Dies features • Fits All Existing 100 Ton Presses Accepting 100 Ton Shell Type Dies • Marked with Huskie and Equivalent Alcoa Catalog Number • Black Oxide Finish
ITEM #
alcoa ITEM # alcoa ITEM # alcoa Equivalent Equivalent Equivalent
HA100-01 HA100-02 HA100-03 HA100-04 HA100-05 HA100-06 HA100-07 HA100-08 HA100-20 HA100-21 HA100-22 HA100-23 HA100-53
10010SH 10012SH 10014SH 10016SH 10018SH 10020SH 10074SH 10075SH 10020AH 10024AH 10027AH 10030AH 10020CD
HA100-24 HA100-25 HA100-26 HA100-27 HA100-28 HA100-29 HA100-30 HA100-34 HA100-36 HA100-37 HA100-38 HA100-40
10034AH 10036AH 10038AH 10040AH 10074AH 10075AH 10076AH 10042AH 10044AH 10046AH 10048AH 10007CD
HA100-41 HA100-42 HA100-43 HA100-44 HA100-45 HA100-46 HA100-47 HA100-48 HA100-49 HA100-50 HA100-51 HA100-52
Huskie U Style Die Case The Huskie Die-Case is offered as a standalone die carrying case and is the same case supplied with the REC-3610 kit. It will hold either 18 “U” type die sets or 8 “P” type die sets. It is constructed of heavyweight plastic with a hinged see-through top for easy identification of die sets.
10010CD 10009CD 10010CD 10011CD 10012CD 10013CD 10014CD 10015CD 10016CD 10017CD 10018CD 10019CD
W Die Case • Huskie W Die Case • Holds up to 12 “w” style Compression Dies
W Die Tree This innovative W-Die Holder is designed to organize and store Burndy W-Dies. Its straight forward design allows for easy insertion of the W-Dies onto the holder, providing greater flexibility and secure storage. Simply press the die button, insert the W-Dies and release!
www.linestar.ca
PT29291 “U” Die Metal Storage Case • Steel case designed for storage and protection of “U” dies used with the Y35 style Tools. • Holds 15 die sets. • Length 9-1/2”, width 6”, height 1-1/2”. • Dies sold separately Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
HPG-4 4 HP, Gas Engine 10,000 psi Hydraulic Pump Specifications Weight Oil Capacity Gas Tank Max Pressure Power Output Oil Delivery @ 100 psi Oil Delivery @ 10,000 psi
74 lbs. with Oil 5 Gallons 3 Pints 10,000 psi 4 HP 480 cubic inches /minute 55 cubic inches /minute
211 compression tools
high-pressure hydraulic pumps, hose & couplers
features • Four Way Valve Allows for Single or Double Acting Capacity • Standard Screw Type Male and Female Couplers The HPG-4 is a self-contained high pressure pump, with manual operation. It is equipped with a 4 HP Briggs & Stratton engine. A four-way valve controls the hydraulic fluid direction for the advance and retract modes. One double acting tool can be operated or two single acting tools at one time. Connection to one port for single acting tools will work since the control valve will dump the fluid when shifted to the retract position. The pump is very compact and comes with carrying handles. NOTE: When using any of these high pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
HPM-P3 5.5 HP, Gas Engine 10,000 psi Hydraulic Pump
Specifications Engine Type Oil Capacity Power Output Max Pressure Oil Delivery @ low pressure Oil Delivery @ high pressure Fuel Tank Capacity Fuel Weight
Honda Air-cooled, 4-stroke OHV 2.5 Gallons 5.5 HP @ 3600 RPM 10,000 psi 2.6 gallons/min .63 gallons/min 3.3 Quarts Unleaded Gasoline ONLY 120 lbs.
features
NOTE: When using any of these high pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
• Inline Pressure gauge located on valve for easy reading • Supplied with carrying cage and castors for easy maneuvering. • High efficiency and fast working gasoline pump. • Better Fuel Consumption and Engine Performance • Oil Sight Gauge • Easy Pressure Valve Adjustments The HPM-P3 is a self-contained high pressure pump, with manual operation. It is equipped with a 5.5 HP Honda engine. A four-way valve controls the hydraulic fluid direction for the advance and retract modes. One, double-acting tool can be operated or two, single-acting tools at one time. Connection to one port for single acting tools will work since the control valve will dump the fluid when shifted to the neutral position. The pump is very compact and comes with carrying cage.
compression tools
212
high-pressure hydraulic pumps, hose & couplers EHP700L11 Battery Powered Pump, 120v Charger Specifications Application: Crimping, Cutting, Punching (High Pressure) Coupler Size: 3/8” Female Height: 11.5” (292mm) Includes: Shoulder Strap, 6’ corded magnetic remote, 2-18V 3.0Ah Li-Ion Batteries, 120V Charger Length: 14.0” (356mm) Material: Fiberglass reinforced Polyamid Number Of Stages: 2 Stage Motor Pressure Rating: 10,000 PSI Type: Battery Powered Useable Oil Capacity: 0.80 qt (0.76l) Voltage Rating: 18V 3.0Ah Li-Ion Battery Weight: 14.1 lbs. Width: 6.5” (165mm) • • • •
Operates with any 10K PSI single acting remote heads 3 in 1 pressure specific program settings for crimping cutting and punching Dashboard display provides real time monitoring of operation On-board and remote rocker switches for pump activation
REC-P600 Hydraulic Pump with 360° Swivel Coupler Specifications Weight Size
19.2 lbs. with 2 Batteries 15”L x 9.6”H x 8.25”D
FEATURES • • • • • •
Weighs Just 19 Pounds Small Design Fits in Tight Spaces Ability to Work Off of 1 or 2 Batteries 360 Degree Swivel Coupler Remote for Advance and Retract of Ram Compatible with all Huskie 14.4V Batteries
www.linestar.ca
The REC-P600 not only utilizes a smaller design to fit into tighter spaces, but also has the ability to work off of one or two batteries. The REC-P600 is four pounds lighter than the REC-P1. There is a 360º swivel coupler and a remote for the advance and retract of the ram.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
REC-P1: RoBo* PUMP
10,000 psi Battery Powered 28.8 Volt Pump The Huskie REC-P1 is a 28.8 volt, battery operated hydraulic pump that runs on two 14.4 Volt Huskie BP-80 series batteries. The REC-P1 is supplied with a push button remote control that allows the operator to advance, hold, and retract when needed. The user is never committed to a full cycle and can always back off at any time during the advance even when the pump is under pressure. High pressure, non-conductive hose can be attached to a 360° moveable swivel port on the pump. This swivel port allows the user to position the hose to fit in confined aerial buckets and manholes.
213 compression tools
low-pressure hydraulic power units
R-14EH: Hydraulic Pump
1/2 HP, 10,000 psi Hydraulic Pump The R-14EH remote operated pump gives the operator complete control. Push buttons permit the user to advance and retract at will. The user is never committed to a full cycle, and can always back off at any time during the advance even under pressure. This feature increases efficiency because cuts and crimps can be adjusted as necessary, simply by stopping the advance or retract mode. A 10-foot remote control cable provides both safety and convenience. The user can set up an operation and then move away from the work site before engaging the tool. An over-ride switch on the pump allows full control at the pump motor. The low amperage of this pump allows it to be used virtually anywhere. The pressure can be easily adjusted between 4,000 and 10,000 psi and determined by using our PG-1 in-line gauge. Consult factory for proper adjusting procedure. NOTE: When using any of these high pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
F20 Hydraulic Power Unit
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
F13 Hydraulic Power Unit
The 13 HP 4-stroke Honda engine has an easy-pull recoil start. Supplied with quick-release telescoping handles and low-oil alert and shutdown system. Open center system. Flow Rate Pressure Weight 5 to 8 gpm 2,000 psi 168 lbs.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
The electric key-start 20 hp Honda engine has a low-oil shutdown system. It has an open-center system and features an engine hour meter, tachometer and a variable oil flow to 10 gpm. Flow Rate Pressure Weight 5 to 10 gpm 2,000 psi 259 lbs.
compression tools
214
low-pressure hydraulic hose & couplers 2,250 psi hose is used with low pressure hydraulic tools. These hoses can be supplied with or without flat face couplers. Black hose is vulcanized, wire-braided reinforced; Red hose is non-conductive.
PART # 135245 135247
Diameter Length Color 3/8” 8’ Red 3/8” 10’ Red
To add couplers to hose, add “MF” to the part number. Other lengths of hose are available.
Shown without Couplers
Low Pressure Hydraulic Couplers PART # Thread NS-372-6FP 3/8” NS-371-6FP 3/8” Dirts Caps Included
Type Ext Female Int Male
FF3716FP Female Coupler 3/8” Internal Thread
FF3718FP Female Coupler 1/2” Internal Thread
54925 Female Coupler
FF3726FP Male Coupler
3/4”-16 SAE O-Ring, External Thread
3/8” Internal Thread
FF3728FP Male Coupler 1/2” Internal Thread
TE2066-6-8S Swivel Coupler 3/8” NPT Female to 3/4 x 16 O-Ring
54923 Male Coupler 3/4”-16 SAE O-Ring, External Thread
TE03-6900-6-6 Swivel Coupler
3/8” NPT Female to 9/16 x 18 O-Ring
High-Pressure Hydraulic Hose
www.linestar.ca
10,000 psi hose is used with high pressure cutting and compression tools. Standard sets include male couplers on both ends. Female couplers are also available.
PART # NC-1610 NC-1625
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
Diameter Length 3/8” 10’ 3/8” 25’
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
49913 Hydraulic Flow Control Valve
Used to control the direction of the flow to the tools, forward or reverse. Includes couplers.
HFC30 Hydraulic Flow Control Valve
Operates off of a vehicle’s hydraulic circuit. It can accept a flow of up to 30 gpm and reduce it to a maximum of 10 gpm allowing the correct flow to the hydraulic tool.
215 compression tools
hydraulic flow valves & intensifiers
10-1-SA Hydraulic Intensifier
This intensifier increases the pressure of the hydraulic system of a vehilce so that high-pressure tools can be operated without an additional power unit. It operates on either open or closed center systems and has an optimum operating pressure of 1,800 psi at 6 gpm. Flow range is 4 - 7 gpm. Includes a 10’ non-conductive, low-pressure twin-line hose and 8’ of high-pressure hose.
HB10 Hydraulic Intensifier
Works on both open and closed center systems and produces 10,000 psi. Input pressure is from 1,000 to 2,000 psi and has a flow rate between 4 - 8 gpm. Couplers & hose sold separately.
High-Pressure Hydraulic Control Valves
These 4-way, 3-position valves can be connected directly to the tool or used remotely with hoses. Output side couplers included.
PVA0021 for Single Acting Tools PVA0022 for Double Acting Tools
04182 Hydraulic Flow & Pressure Gauge
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Used to test the hydraulic circuitry by measuring the backpressure, resistance and flow. Includes couplers.
compression tools
216
AMPACT POWDER ACTUATED WEDGE TOOLS AMPACT TOOLS
Precision designed tools for installing taps and stirrups to solid or stranded conductor; aluminum to aluminum, copper to aluminum or copper to copper. These tools are actuated by firing a special powder-loaded shell within the tool. The shells are color coded to indicate the powder charge and to correspond with the color coding of the taps & stirrups.
Small Ampact Tool for Red, White & Blue Taps
Large Ampact Tool for Yellow Taps 336 through 1192 kcmil. Part # 69611
#8 through 350 kcmil. Part # 69437
Take-Off Clips
Ampact Tool Heads
The four types of take-off clips are used with the Ampact Tools to remove terminated taps and stirrups from conductors.
www.linestar.ca
Part # Tap Color 69684 Red 69685-1 Blue
Part # 69947 69847
Part # 47667-8 69633-2 69612
Tap Color White Yellow
Description Small Head Only Large Head Only Universal Power Unit Fits Both Small & Large Heads
Auxiliary Platform
Cleaning Tool
Required when installing AMP red-coded copper wedge connectors. Part # 306814-3
Part # 314199-1
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
217 compression tools
AMPACT POWDER ACTUATED WEDGE TOOLS
306347-1
69816
306348-1
69833-1
306350-2
306349-1
69674 (Sold Separately)
306349-2
AMPACT Accessories Hotstick Kit (Part # 69610-1)
Part # Items Included in Kit 306347-1 Geared Breech 69816 Piggyback Clamp for Wire Sizes #8 to 556.5 - 26/7 ACSR (990 Amps Continuous Service) 306348-1 Wedge Holder 306350-2 “C” Holder 306349-1 AMPACT Tool Holder (For Tool 69611) 69833-1 90˚ Adapter 306349-2 Tool Holder (For Tool 69437)
Related Components (Sold Separately) Items Included in Kit Hammer Head Piggyback Clamp for Wire Sizes 795.0 to 1192.5 - 45/7 ACSR (Not Shown) Combination “C” Wedge (Not Shown)
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Part # 69674 69883 69900
fibreglass hotline tools
218
fibreglass shotgun sticks Internal Rod Shotguns The operating rod is inside the main pole and is available in the Fixed Length style only.
Fixed Length Style PART # Length 8204 4-1/2’ 8206 6-1/2’ 8208 8-1/2’ 8210 10-1/2’ 8212 12-1/2’
Storage Bag C-8104 C8106 C8108 C8110 C8112
Add “U” suffix for Universal End
External Rod Shotguns
The operating rod is outside of the main pole making all parts easily accessible for cleaning an inspection.
Fixed Length Style PART # Length 8104 4-1/2’ 8106 6-1/2’ 8108 8-1/2’ 8110 10-1/2’ 8112 12-1/2’
Storage Bag C-8104 C8106 C8108 C8110 C8112
Hinged Style PART # Length 13412 6-1/2’ 13413 8-1/2’ 13414 10-1/2’ 13415 12-1/2’
Storage Bag 01-015 01-015 01-017 01-017
Telescoping Style
www.linestar.ca
PART # Retracted Length Storage Bag 8158 5’ - 1” 5’-1”, 6’-6”, 8’ C-35 81611 6’ - 6” 6’-6”, 8’, 9’-6”, 11’ C-8106 81-814 8’ 8’, 10’, 12’, 14’ C-8108 81-1018 9’ - 10” 9’-10”, 11’-9”, 13’-6”, C-8110 15’-6”, 17’-6” Add “U” suffix for Universal End
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
A variety of lengths allows the lineman to perform many routine jobs from the ground. The universal end fitting accepts a wide range of attachments to complete many different jobs with one tool. The top section of the Tip Lock style retracts and locks into the next section giving it double wall strength
Single Spline
Tip Lock Style, 7/8” Tip
PART # Length 567-4 4’ 567-6 6’ 567-8 8’ 567-10 10’ 567-12 12’
PART # Retracted Length ST-216 4’ - 8” 12’-4”, 16’ ST-220 4’ - 10” 17’, 20’ ST-225 5’ 17’, 21”, 25’-6” ST-230 5’ - 2” 17’, 21-6”, 26’, 30’ ST-235 5’ - 3” 17’, 21’-6”, 26’, 30’, 35’ ST-240 5’ - 5” 22’, 26’, 30’, 35’, 40’
Double Spline PART # Length 4678-4 4’ 4678-6 6’ 4678-8 8’ 4678-10 10’ 4678-12 12’
Heavy Duty, 1-3/32” Tip PART # Retracted Length SH-212 3’ - 8” 12’ SH-216 4’ - 10” 9’, 13’, 17’ SH-200 5’ 13’, 17’-6”, 21’-6” SH-250 5’ - 2” 13’, 17’-6”, 21’-6”, 26’ SH-230 5’ - 3” 13’, 17’6”, 21’ 6”, 26’, 30’
Switch Sticks PART # Length 460-4 4’ 460-6 6’ 460-8 8’ 460-10 10’ 460-12 12’
Triangular “No-Twist”
Disconnect Sticks PART # Length 461-4 4’ 461-6 6’ 461-8 8’ 461-10 10’ 461-12 12’
219 fibreglass hotline tools
telescoping, universal & disconnect sticks
Switch Stick
Triangular No-Twist
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
PART # Retracted Length HV-208 2’ - 2” 8’ 06-185 Stick Holder for HV-208 HV-312 3’ - 1” 12’ 06-186 Stick Holder for HV-312 HV-212 4’ - 10” 12’-7” HV-216 5’ 16’-9” HV-220 5’ - 2” 21’ HV-225 5’ - 4” 25’-6” HV-230 5’ - 6” 30’ HV-235 5’ - 8” 35’ HV-240 5’ - 9” 39’-6”
fibreglass hotline tools
220
measuring sticks Safely measure vertical heights. Available in English or Metric graduations. Used to measure overhead lines, telephone, cable-TV, highway clearances, and structures.
FEATURE AND BENEFITS: • Eye-level reading, no calculations required, the read-height is shown at the top of the base section • Positive locking buttons, spring-loaded, fast accurate and easy to extend • Standardized parts for quick and easy repair and replacement PART # Extended E-25 25’ E-30 30’ E-35 35’ E-40 40’ E-50 50’ M-25 7.5 METERS M-35 10.5 METERS M-40 12 METERS M-50 15 METERS
Retracted 65 3/4” 65 3/4” 65 3/4” 65 3/4” 69 3/16” 1.67 METERS 1.67 METERS 1.67 METERS 1.76 METERS
Weight Case 3.2 lbs. C-35 4.5 lbs. C-35 5.9 lbs. C-35 7.5 lbs. C-35 13.2 lbs. C-40 1.5 kg. C-35 2.7 kg. C-35 3.4 kg. C-35 6.0 kg. C-40
COMBINATION HOT STICK AND MEASURING STICK One stick does it all, the heavy duty Tel-O-Pole II and Measuring Stick, all in one. Available in English or Metric graduations.
FEATURE AND BENEFITS:
www.linestar.ca
• Open and close switches, disconnects, line fuses, cut outs, as well as measure elevated heights • Eye-level reading, no calculations required, the read-height is shown at the top of the base section • Markings are printed in large easy to read numbers • English models are in feet and inches • Metric models are in meters and centimeters
PART # Extended EV-25 25’ 6” EV-30 30’ EV-35 35’ EV-40 39’ 6” MV-25 7.8 METERS MV-30 9.2 METERS MV-35 10.6 METERS MV-40 12 METERS
Retracted 64” 66” 68” 69” 1.63 METERS 1.68 METERS 1.72 METERS 1.75 METERS
Base Dia. 1.91” 2.07” 2.22” 2.38” 4.85 cm 5.25 cm 5.6 cm 6.04 cm
Weight Case 8.1 lbs. C-40 10.0 lbs. C-40 12.1 lbs. C-40 14.4 lbs. C-40 3.7 kg. C-40 4.5 kg. C-40 5.5 kg. C-40 6.5 kg. C-40 E-25
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
EV-30
100%
Canadian Owned
221 fibreglass hotline tools
fibreglass shotgun sticks External Rod Shotguns
The operating rod is outside of the main pole making all parts easily accessible for cleaning an inspection.
Fixed Length Style PART # Length Storage Bag C403-0291 4-1/2’ P6434 PSC4030291005 5’7” P6436 C403-0292 6-1/2’ P6436 C403-0293 8-1/2’ P6438 C403-0294 10-1/2’ P64310 C403-0295 12-1/2’ P64312 Add “A” suffix for Universal End Fitting
Telescoping Style PART # Retracted Lengths C403-1035 5’ - 3” 5’-7”, 6’-9”, 8’ C403-1036 8’ - 3” 8’-7”, 10’-4”, 12’-2”, 14’
Telescoping w/ Universal End PART # Retracted Lengths C403-3060 5’ - 6” 5’-10”, 7’-1”, 8’-4” C403-3061 8’ - 6” 8’-10”, 10’-8”, 12’-6”, 14’-4”
M1867 Universal Shotgun Adapter
Converts any shotgun to use all Universal Tool attachments.
Hinged Style PART # C403-0296 C403-0297 C403-0298 C403-0299 C403-0342 C403-0343
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
phone: phone: phone: phone:
Extended Storage Bag 6-1/2’ P6432 8-1/2’ P6432 10-1/2’ P6433 12-1/2’ P6435 14-1/2’ PSP6435005 16-1/2’ PSP6435004
Add “A” suffix for Universal End Fitting
Universal End Fitting
Alberta: British Columbia: Manitoba: Ontario:
Folded 3’ - 4” 4’ - 4” 5’ - 4” 6’ - 4” 7’ - 4” 8’ - 4”
fibreglass hotline tools
222
telescoping hot sticks A variety of lengths allow the lineman to perform many routine jobs from the ground. The universal end fitting accepts a wide range of attachments to complete many different jobs with one tool.
Standard Duty, 1-1/16” Tip PART # Retracted Length T403-2205 2’ - 4” 7’-2” T403-3240 3’ 7’-6”, 11’ C403-1739 4’ 14’, 17’, 20’, 23’ C403-1023 4’ - 8” 8’ C403-1017 4’ - 9” 8’, 12’ C403-1018 4’ - 11” 12’, 16’ C403-1019 5’ - 1” 12-1/2’, 16-1/2’, 20’ C403-1020 5’ - 3” 16-1/2’, 20-1/2’, 25’ C403-1021 5’ - 5” 17-1/2’, 21-1/2’, 25-1/2’, 30’ C403-1022 5’ - 7” 22’, 26’, 30-1/2’, 35’ T403-3349 6’ - 3” 22’, 28’, 34’, 40’
Storage Bag C4032813 P6434 P6434 P6434 P6434 P6213 P6213 P6213 P6215 P6216
Heavy Duty, 1-1/4” Tip PART # Retracted Length C403-1597 4’ - 8” 8’ C403-1598 4’ - 9” 8’, 12’ C403-1599 4’ - 11” 12’, 16’ C403-1600 5’ - 1” 12-1/2’, 16-1/2’, 20’ C403-1601 5’ - 3” 16-1/2’, 20-1/2’, 25’ C403-1602 5’ - 5” 17-1/2’, 21-1/2’, 25-1/2’, 30’
Storage Bag P6434 P6434 P6434 P6213 P6213 P6213
Measuring Sticks
These telescoping measuring sticks are marked in both English and Metric scales.
www.linestar.ca
PART # C403-1021EM C403-1022EM
Retracted Length 5’ - 5” 30’ 5’ - 7” 35’
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Storage Bag P6434 P6215
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
223 fibreglass hotline tools
universal & discounnect sticks
Universal Sticks
Designed to accept the universal tools and more. Double spline sticks have a universal fitting on both ends. Made of 1-1/4” diameter FRP.
Single Spline PART # Length H1760-1 6’ - 1” H1760 8’ - 2”
Double Spline
Storage Bag P6436 P6438
PART # Length H1760-3 6’ - 3” H1760-4 8’ - 3” H1760-10 10’ - 3” H1760-12 12’ - 3”
H1761 Universal Storm Tool
Storage Bag P6436 P6438 P64310 P64312
P6438 Storage Bag
The two rubber insulator skirts provide extra leakage distance and disrupts water paths that would otherwise run down the pole. 1-1/4” x 8’-2”.
Disconnect Sticks
Desinged primarily for opening and closing disconnect switches and cutouts as well as installing and removing open-link fuse links.
Switch Sticks, 1-1/4” Diameter PART # Length H3046-12 6’ H3046-13 8’ H3046-14 10’ H3046-17 12’
Storage Bag P6436 P6438 P64310 P64312
Disconnect Sticks, 1-1/2” Diameter PART # Length H3046-22 6’ - 1” H3046-23 8’ - 1” H3046-24 10’ - 1” 3046-15H 12’ - 1”
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
Disconnect Head
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Switch Stick Head
Storage Bag P6436 P6438 P64310 P64312
224 fibreglass hotline tools
specialty hot sticks
Wire-Holding Sticks
PART # Length C403-3068 1-1/4” x 6’-5” C403-3069 1-1/4” x 8’-5”
These fiberglass tools can be used on or around energized conductors for forming, bending and positioning jumper wires and also for holding conductors during splicing operations. The gripper head has an eye so that other sticks can assist with heavy bending and has a capacity of #6 solid copper through 1590 ACSR. The head can be locked into three positions to engage and position conductors from almost any angle.
Tie Sticks
Rotary Prong Tie Sticks are used for handling looped ties. Two-Prong Tie Sticks are used for handling hot ties with loops. Rotary Blade Tie Sticks have a swivel action for greater freedom of movement than fixed-blade sticks.
PART # Head End Length H1855-19 Rotary Prong Universal 8’-3’ H1855-20 Two-Prong Universal 8’-4” H1855-25 Rotary Prong Rotary Blade 8’-2” H1855-26 Rotary Blade Universal 8’-3” Rotary Prong
Two-Prong
Rotary Blade
Impact Elbow Puller Tools
These tools are used to remove elbow connectors from bushings of transformers. The integral hook on the tool head fits through the rubber eye of an elbow or the metal hook of a bushing cap adding extra control and pulling power to the grippers. Order grippers separately.
www.linestar.ca
Elbow Puller Tools
Elbow Grippers
PART # Length C403-1851 4-1/2’ C403-1822 6’ C403-1850 8’
PART # Rating C403-0704 15kV C403-0613 25kV 34.5kV Grippers are available C403-0704
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
225 fibreglass hotline tools
specialty hot stick attachments
T403-3009 Torque Extension Stick for Hydraulic Power Tools
This insulated stick permits hot-line work with hydraulic impact wrenches on bucket trucks. The 7/16” hex shank end connects to the wrench and the square end with detent-ball fitting accepts all 1/2” drive sockets. The 1-1/4” x 4’ pole has a 75 ft-lb rating.
H2106-4 Universal Tree Trimmer
Designed to cut branches up to 1-1/2” in diameter, this trimmer is especially useful around energized conductors. The trimmer pole is 18” long and comes with 25 feet of rope.
IB5 The IceBuster
Easily and thoroughly removes ice build-up from any wire up to 336 ACSR. The 5” wheel is placed over the icy wire. Then with minimal downforce, the user simply walks down the line and the ice shears right off the wire.
C4032213 Pruning Saw 16” Teflon Coated
Arc Snuffer Removal & Replacement Tools
These hot-line tools permit easy retrieval of broken arc snuffers and the installation of replacements without having to de-energize the URD bushings. The Removal Tool works like a bolt extractor. The damaged arc snuffer is removed by simply unscrewing the broken part. The Replacement Tool controls the alignment with a center post that snaps into the arc snuffer bore. The two steel lugs of the tool are inserted into the holes of the snuffer collar for tightening torque.
C403-2037
C403-2036
Removal Tool
Replacement Tool Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Fits most 15 & 25kV snuffers.
fibreglass hotline tools
226
universal attachments
M4455-69 Rotary Prong
M4455-70 Rotary Blade
Tie Stick Head
Tie Stick Head
M4455-103
M4455-96
Cotter Key Holder
Cotter Key Puller
M4455-17 Fixed Prong Tie Stick Head
M4455-79
Spiral Disconnect
M4455-85 Hammer
M44559
Disconnect Head
M4455-50
M4455-38
Skinning Knife
www.linestar.ca
Clear Vision Mirror
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
227
M4455-46
Flexible Wrench Head
M4455-12
Snapout Cotter Key Remover
M4455-28
M4455-39
Screw Driver
Shepherd Hook
M4455-102
Clevis Pin Installer
M4455-67
Adjustable Insulator Forks
fibreglass hotline tools
universal attachments
M4455-23 Hack Saw
M4455-72
Conductor Gauge
Double Header Universal Attachment
The DOUBLE-HEADER Universal Attachment tool is a unique tool that lineman can use on the end of an extendo or insulated switch stick. It allows the use of two different tools on one stick.
12425
Cotter Key Replacer-Puller
They say “two heads are better than one” and MADI agrees. Save time and carry fewer hot sticks by using the DOUBLE-HEADER to attach two different universal tool accessories to the same stick. The DOUBLE-HEADER maximizes speed and convenience. Why change the accessory when you can just twist the stick!
M4455-87
Ball Socket Adjuster
M44552 - Pin Holder
M445582 - All Purpose Cotter Key Tool
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
For pulling and replacing hump-type cotter keys. Particularly suitable for use on clevis pins and ball socket insulators. Easy guiding of cotter key provided by contoured slot and raised eye pin.
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
For replacing pins and bolts. The bolt head fits into a slot and is held tight by spring action. Will take bolts or pins up to 5/8” diameter. Fits EEI and NEMA insulators.
fibreglass hotline tools
228
universal attachments
UH-016
Photo Cell Tester
M4455-92
Conductor Brush
10-180
Conductor Brush
M4455-63
Conductor Brush
Hastings Universal Vise Grips • 5455-99: 10” size holds split bolts and parallel groove clamps • 5455-98: 7” size for cotter pins
M4455-6 Ratchet Wrench
M1867
Universal Shotgun Adapter
M4455-89 Bolt-Thru Wrench For 5/8” Hardware
151-ACA Lamp Changer
100-200 Watt Bulbs
152-AC Lamp Changer
300-500 Watt Bulbs
TE08IRW-U 1/2” Drive Insulated Ratchet Wrench
153-AC Lamp Changer
www.linestar.ca
This 9” polymer wrench provides protection against electrical shock up to 1,000 VAC.
750-1500 Watt Bulbs
TE06IRW-U 3/8”” Drive Insulated Ratchet Wrench
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
229
PSC403-3484 Cutout Tool
LITFINGER Lighted Disconnect Head
This tool holds, installs and removes most brands of 100 amp fuse holders. The disconnect prong opens and closes cutouts.
With a built-in LED light, this tool is perfect for dark or unlighted areas and night operations. Includes 3 AAA Batteries.
GRAB-IT-1 Cutout Fuse Puller, 100 Amp
fibreglass hotline tools
universal attachments
TESF1 Safety Finger
Easily removes and installs the fuse tube from the cutout body.
A safety device for installing and removing cutout fuse barrels. The springloaded design firmly holds the fuse barrel in place and prevents it from falling. Fits standard 100 amp cutout fuse barrels.
GRAB-IT-2
For 100 & 200 Amp Fuses
10-096
Armor Rod Tool
C403-1071 C403-0177
All-Angle Pliers
Hot Rodder Tool, 1-3/4” Loop
M4455-78
C403-0834
Fuse Puller, 1/2” - 1-1/2”
Hot Rodder Tool, 3” Loop
Fuse Puller, 1-1/2” -2-1/2”
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
M4455-77
211
HoTLInE ACCESSoRIES Hot Stick Cleaning & maintenance
fibreglass hotline tools
fibreglass ladders & arms
230
ExTEnDo SLICk • • • • • • •
Helps all your telescopic sticks slide freely Reduces friction caused by wear and contaminants Formulated for hot stick use • Non Conductive Non Flammable • Easy to use - Just spray on Repels dust • Dries quickly - Long Lasting Onc can will do up to eight 40’ telescopic sticks Optional spray handle sold seperately
item # 10-088 10-089 P31444
description lbs. EXTENDO SLICK SPRAY 0.8 EXTENDO SLICK SPRAY - CASE OF 12 SPRAY HANDLE 0.2
P31444 9.6
10-088
Fiberglass Cleaner/Wax
C4002538
C4002568
Kearney fiberglass care products are specifically intended to maintain the protective characteristics of fiberglass poles and equipment in electrical service. When used as a two-part program of cleaning/waxing-refinishing, it represents a simple, easy way to restore a clean, high gloss, water- repellent finish to used poles as well as preserve their operating properties. 16 fl. oz. bottle (473 ml) Packed 12 bottles per case. Minimum order - one case.
Moisture Eater II Wipes Small pocket-size packets encourage frequent cleaning of insulated hot-line tools, line hose and rubber blankets. This helps utilities stay in compliance with OSHA 29 CFR 1910.269(j).
• Economical, individual packets encourage daily use • Packaged to put convenience on the jobsite everyday • Perfect step to follow daily cleaning or gloss restoration • Quick and easy extra protection
Alberta: phone: 403-243-1900 •
[email protected] British Columbia: phone: 604-594-2701 • fax: 604-594-2751 British Columbia: phone: 604-594-2701 •
[email protected] Alberta: phone: 403-243-1900 • fax: 403-243-2063 Manitoba: phone: 204-783-9771 •
[email protected] Saskatchewan/Manitoba: phone: 204-783-9771 • fax: 204-783-8951 Ontario: phone: 905-564-5344 •
[email protected]
100%
Canadian Owned
www.linestar.ca
www.linestar.ca
for hot-line tools, rubber line hose & blankets
Silicone Wipes
231
Swivel Hook Ladders
Spliced Ladders
Swivel Hook Ladders come standard with 8” hooks though 14” and 18” hooks can be special ordered. Standard Duty Ladders have 2” side rails and Heavy Duty Ladders have 2-1/2” side rails. Both styles of ladders have 14-1/2” rungs.
Regular Duty Ladders PART # Length H4904-8 8’ H4904-10 10’ H4904-12 12’ H4904-14 14’ H4904-16 16’
Weight 42 lbs. 46 lbs. 52 lbs. 60 lbs. 68 lbs.
Spliced Ladders can be combined to reach lengths up to 32 feet. They have 2-1/2” rails and top sections are provided with 8” hooks complete with chains.
2 Rail Spliced Ladders PART # C402-0482 C402-0402 C402-0404 C402-0407 C402-0411 T402-0423 C402-0418 C402-0421 C402-0422
Weight 47 lbs. 55 lbs. 63 lbs. 70 lbs. 76 lbs. 85 lbs. 98 lbs.
PART # Description C402-0119 20’ Straight Ladder C402-0512 8’ Bottom Section C402-0514 12’ Bottom Section C402-0514 12’ Top Section
Weight 100 lbs. 43 lbs. 22 lbs. 62 lbs.
Epoxiglas Insulated Platforms
Insulated Platforms PART # Length C402-1042 4’ C402-1043 6’ C402-1079 8’
Weight 44 lbs. 48 lbs. 52 lbs. 56 lbs. 64 lbs. 44 lbs. 28 lbs. 32 lbs. 36 lbs.
3 Rail Straight & Spliced Ladders
Heavy Duty Ladders PART # Length H4905-8 8’ H4905-10 10’ H4905-12 12’ H4905-14 14’ H4905-16 16’ H4905-18 18’ H4905-20 20’
Description 10’ Top Section 12’ Top Section 14’ Top Section 16’ Top Section 20’ Top Section 10’ Middle Section 8’ Bottom Section 10’ Bottom Section 12’ Bottom Section
fibreglass ladders & arms
fibreglass hook ladders
Weight 49 lbs. 56 lbs. 60 lbs.
Mounting Brackets PART # Description Weight M4901-10W Fixed Pole Mount 9 lbs. M4901-21 Fixed Tower Mount 10 lbs. C402-1164 Pivot Base for 42” & 4’ Platforms 28 lbs. C402-1173 Pivot Base for 6’ & 8’ Platforms 29 lbs.
Tripods & Railings
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Weight 9 lbs. 13 lbs. 15 lbs. 17 lbs.
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
PART # Description H4964 Tripod for 4’ Insulated Platform C402-1055 Railing for 4’ Insulated Platform C402-0023 Railing for all 6’ Platforms C402-0024 Railing for all 8’ Platforms
fibreglass ladders & arms
232
Round Epoxiglas Extension arms These arms are designed for use on voltages up to 15kV. They can also be used on voltages up to 34.5kV by fitting the wireholders with an insulator. The maximum vertical load is 150 per wireholder lbs except the C400-1310 which has a 300 lbs rating.
M4805-7
Insulator Add these for voltages up to 34.5KV
# of Wire Crossarm PART # Dimensions Holders Size Weight H4800-60 2-1/2” x 5’ 1 3-3/4” x 4-3/4” 11-1/2 lbs. H4800-72 2-1/2” x 6’ 2 3-3/4” x 4-3/4” 13 lbs. C400-1310 3” x 6’ 2 3-3/4” x 4-3/4” 24 lbs. & 6” x 6” T403-2417 2-1/2” x 6’ 2 3-3/4” x 4-3/4” 15 lbs. & 6” x 6”
Super “U” Extension Arms
www.linestar.ca
The “U” shaped profile gives these arms a load rating of 200 lbs per wireholder. These arms are furnished with an insulator on each wireholder giving them a 35kV rating.
# of Wire Crossarm PART # Holders Size 7545 2 4-1/4” x 6-3/4” 7547 1 4-1/4” x 6-3/4”
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
Weight 18.8 lbs. 15.4 lbs.
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
Round Conductor Support Arms
Insulated temporary conductor supports to hold energized distribution conductors up to 15kV. For higher voltages, use M4805-7 insulator. The working load is 150 lbs per wireholder on the T400-1939 and 200 lbs on the T400-1940.
# of Wire PART # Holders Length T400-1940 1 30” T400-1939 2 48”
Insulator - Add these for voltages up to 34.5KV
Weight 14 lbs. 18 lbs.
233 fibreglass ladders & arms
fibreglass conductor supports & gins
Super “U” Conductor Support Arms
PART # 5045 5047
Designed for reconductoring and maintenance of line voltages up to 34.5kV. They have a load rating of 200 lbs per wireholder and a 44” long ratcheting nylon strap binder.
# of Wire Holders Length Weight 1 34-3/4” 14.3 lbs. 2 49-7/8” 18 lbs.
5607 Crossarm Sling
Made of 12 plies of nylon laminated together with neoprene. Resistant to oil, creosote and moisture. 23-1/4” long.
H20 Transformer Gin
T400-1938 Transformer Gin
Alberta: British Columbia: Manitoba: Ontario:
This ratcheting strap type transformer gin has a 5” extended base. The maximum rating is 2,000 lbs. and the 2” x 44” strap fits most structures.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
5800-5 Transformer Gin The eye of this ductile iron gin stands 10-5/8” off of the pole. It comes with a ratcheting strap binder and the working load limit is 1,900 lbs.
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
The yoke casting fits over most distribution crossarms. At a maximum 30O angle from vertical, it has a load rating of 750 lbs.
meters & testers
234
Sensorlink ampstiks Ampstik® High Voltage Ammeter • • • •
Slips on and off the conductor with +1% accuracy Measures Amps Open CT that rejects stray magnetic fields Sample and hold measurements High voltage rated 500kV
Ampstik® Plus High Voltage Ammeter (stores four readings) • • • •
Slips on and off the conductor with +1% accuracy Sample and hold four unique measurements Open CT that rejects stray magnetic fields Single button operation & Flame resistant housing
Radio Ampstik® Radio Linked Multiple Reading Ammeter
• Heads Up Display for instant conformation of the reading • Records up to four readings with remote read out up to 50 feet away • Operates in the 900 MHz non licensed frequency band & new non-conductive Universal Chuck • Mount the Display on the hotstick or hold in your hand
Ohmstik Live-Line Ohmmeter
www.linestar.ca
• • • •
Measure microhm resistance on a live high voltage conductor Superior measurement compared to infrared thermography Measures resistance using AC current in the line Measures & displays both amps and micro-ohms
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
Sensorlink Amcorders & Varcorders
235
meters & testers
Qualistik Plus Power Quality Meter
• Slip over a high voltage conductor & collect four power quality measurements • Measures Amps & leading or lagging Power Factor • Measures Total Harmonic Distortion (THD) & indicates direction of current flow • Stores up to nine sets of readings
Troubleman’s Kit Radio Based Ammeter & Voltmeter • • • •
Measures both Amps & Volts on Primary Districution Circuits Tow Probes, One Remove Display with 1% Accuracy for both Amps & Volts One Volt Resolution to 37,000 Volts One Amp Resolution to 5,000 Amps Troubleshoot Problems on Distribution Circuits
Amcorder Recording Ammeter • • • •
Collect and analyze load profiles Patented open CT sensor with +1% accuracy Easily clamps to the line in seconds Recorded data quickly downloads into the user’s PC
Varcorder Amp, Power Factor & VAR Recorder • • • •
Collect and analyze load & power profiles Easily clamps to the line in seconds Infrared communicaiton with no annoying cables to connect Softlink interface generates reports & creates graphs for profile analysis
Amcorder UG Underground Recording Ammeter
Collect and analyze load & power profiles Use on Underground Circuits Open CT sensor with +1% accuracy Easily clamps to the line in seconds & is submersible
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
• • • •
meters & testers
236
line isolation verifier NON CONTACT DETECTION OF AC POTENTIALS ON CONDUCTORS • Single point measurement of conductors • No contact or ground required • Wide voltage detection range • Highly directional • Light weight and rugged • Simple operation • Audio and visual indicators • Patented signal filtering design •1000’s of units in service • Over 15 years field usage
Bot Engineering’s Line Isolation Verifiers (LIVs) and Line Verification Testers (LVTs) are lightweight rugged devices that have been specially designed to detect the presence of AC potentials on unshielded conductors. Typical uses include line isolation verification (to verify electrical isolation before applying temporary grounds) and line verification testing (to verify the energized statues of an electrical conductor). LIVs and LVTs operate be sensing the electrical field that surrounds a energized conductor. Electrical connections are not required for this device to measure electrical voltages. The device is turned on by releasing a white locking nut and extending a plunger that is located on the top of the device. The user slides the plunger out until the desired test voltage is indicated on the plungers scale. The locking nut is then tightened and the LIV/LVT is ready to use. THE LIV/LVT will alarm with a pulsing audio tone when the device senses a voltage that is greater than 40% of the selected voltage. A high intensity LED located on the bottom of the device will also blink providing a visual indication of the alarm status. LIV’s and LVT’s have a patented design utilizing a collimated signal frequency filter that provides maximum sensitivity to energized conductors that fall within 30 degrees of the instrument’s centre-line. This unique feature eliminates the adjacent conductor pick-up problem typically encountered with other potential indicating devices. Over the past 15 years, LVT’s and LIV’s have achieved broad international acceptance as an accurate, reliable and versatile safety device. Thousands of these units are used daily in countries throughout the world.
www.linestar.ca
Line isolation Verifiers (LIVs) are available in three models, the LIV144, LIV500 and LIV500M. All three models cover a voltage range of 2.4kV to 500kV and are identical except for the voltage markings on the plunger scale. They all also have a URD voltage position (underground residential distribution) that can be used to verify underground cables at load break elbows. The Line Verification Tester (LVT144) is similar to Line Isolation Verifiers (LIVs) except that it has been optimized to operate at a lower voltage range of 120VAC to 44kV. Both the LIV and LVT come with a removable hot stick adapter that clips on the units outer tubular surface. An optional waterproof carrying/storage case is also available. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
237
Voltage Testers
meters & testers
VD1000TUS Digital Voltage Indicator
The VD1000TUS Digital Voltage Detector is designed for easily indicating AC voltage on Underground capacitive test points, primary, Over head primary and Transmission conductors up to 999.9 kV. The large digital display can be seen and read at distances up to 50’. Unit is perfect for large system voltages from capacitive test points, 1.0kV – 99.9kV Phase to Ground. Complete kit includes overhead hook and straight probe with 18” foam padded storage case. Accessories available: 3kV AC Proof Tester Features include: • Large LED Display • LED Segment and Battery Test • Standard 9 Volt Battery • Water Tight Construction • Black Sunshield • Durable Modular Construction • 1 Year Free Replacement Warranty • Capacitive test point, 0-99.9 kV URD, 0-99.9 kV OH, 0-999kV OHT. • Backlit continuous for nighttime use • Rated for Indoor and Outdoor Use • Most versatile and accurate unit in the utility industry • Shotgun & Hot Stick Compatible (Universal Grip All Accessory)
STA-LT-US (URD) Live Voltage Tester
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Live Voltage Tester kit • Patented Ferro Electric Detector • Visual indicators • High quality beeper • Full in-built self test function • Water resistant design • Electronic Touch pad control • Auto power off • Operator feedback -both visual and audible • Low battery indication • Universal Handle for use with Gripall Hotstick and universal sticks no adapter needed • LiveTester is a technological breakthrough in non-contact voltage detectors. By utilizing state-of-the-art electronic circuitry,developed acompletely new design in voltage detection equipment. • Completely new design in voltage detection equipment. • The patented ferro-electric detector and updated design techniques maxmizes reliability and long life, and provides increased safety for todays electrical personnel. • Static Discriminator technology exclusive in LiveTester provides more reliable detection on low voltage ranges, and now means no more false alarms. • This makes LiveTester the first non-contact voltage detector suitable for patrolmen work and detecting pole leakage. • LiveTester incorporates a universal attachment into the handle that can be f i t ted to a standard Universal or shotgun (gripall) hot stick without any loose adaptors. • Includes 11 range settings from 240v to 230 KV plus 2 URD settings of 15KV and 25kV. • Includes foam filled case
VOLTAGE DETECTORS
meters & testers
238
Audio/Visual Voltage Detectors
May be used with rubber gloves or hot sticks. Indicates voltage with LED light and audible signal. Kit includes tester, shotgun adapter & case.
PART # Voltage Settings (Phase to Phase) 4556 240V, 4.2kV, 15kV, 25kV, 35kV, 69kV, 115kV, 230kV 4667 240V, 4.2kV, 35kV, 69kV, 115kV, 230kV, 345kV, 500kV 4769 Overhead: 4.2kV, 15kV, 25kV, 35kV, 46kV, 69kv Underground: 15kV, 25kV, 35
DVI-100 Digital Voltage Indicator with Overhead Hook Probe The DVI-100 Series Digital Voltage Indicators are single point instruments designed to read the voltage on a conductor up to 99kV line-to-ground. The large LED readout is easy to read on the end of a long hotstick and can be used on overhead lines or in underground applications with an underground bushing probe. There are two DVI-100 models. The DVI-100 indicates voltage from 0.1kV to 99kV on overhead and underground systems - displaying the voltage on a large 2-digit LED display. The DVI-100T with Test Point Mode has the added feature of indicating voltage on elbow test points. The DVI displays the voltage and emits an audible alarm when voltage above 100VAC is detected with no range selector switches or settings to be made - just contact the conductor and read the display. This allows the user to determine if the voltage being read is nominal or a lower induced voltage.
DVI-500T/K02 Digital Voltage Indicator
www.linestar.ca
Reads voltages from 0.1 to 500 kV on overhead and underground systems. There are no switches or settings to be made. Kit includes 2” hook probe, 6” hook probe, underground bushing probe for 15, 25 & 35 kV, proof tester for voltage indicator and storage case.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
239
VOLTAGE DETECTORS
meters & testers
PRX-500 Proximity Voltage Detector
The PRX Proximity Voltage Detector is a non-contact detector with nine standard voltage ranges from 120V to 500kV. When voltage is detected, the PRX-500 gives an audible and visual indication with a typical detection distance of 10 inches. The PRX has the ability to detect voltage on most elbow test points at the 120V setting. With a rechargeable internal battery, the PRX can be charged quickly from 12VDC automotive outlets or from 115-240VAC. The rechargeable battery sealed inside the PRX is a lithium-ion type, the same battery typically used in smart phones and other portable electronics. It is however, substantially larger in capacity resulting in much longer life for the PRX. Internal circuitry prevents overcharging and protects the battery from excessive temperatures. The battery is sealed inside the device, providing maximum protection. Other key features of the PRX battery system are: • If the battery is low, a quick 15 minute charge provides over one full day of use • PRX battery life on a full charge is one week of continuous use • A full charge takes only three hours Proximity Voltage Detector Features • Nine standard voltage ranges from 120V up to 500kV • Detects voltage on most elbow test points • Detects voltages 10” (25 cm) or greater from the source • Rechargeable battery with quick recharge - if the battery is low a quick 15 minute charge provides one full day of use • Rugged, durable housing • Dual hotstick connections - universal spline and shotgun stick • Loud beeper and LED lights indicate voltage • Weighs less than 1 pound (0.45 kg) • Easy to use electronic touch pad with large buttons • Custom voltage ranges available upon request • Can be used on 50Hz and 60Hz systems • Kits with different accessory options are available
Overhead Transformer Meter
The SensorLink Transformer Meter provides utility groups with precise information to quickly identify inefficient Transformer loading due to power theft, without the requirement of Advance Metering Infrastructure. The drive-by Transformer Meter is designed to capture the following parameters: - Accumulated kilowatt hours - Average Volts - Average Amps - Interval Kilowatt Hours Approximately 330 days of interval data is stored on the system. Using secure radio protocol, this stored data is downloaded while the meters are still deployed on the Transformer.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
The secure radio communication between the deployed Transformer Meters and a computer uses point-to-point radio technology. This standards based, non-licensed wireless network solution supports low power consumption, security, and reliability. The radio in the Transformer Meter communicates to a USB radio transceiver that is connected to the user’s laptop. The transceiver quickly connects for easy communication of setup parameters and data download.
meters & testers
240
VOLTAGE DETECTORS PRX-69D Proximity Voltage Detector
The PRX-69D Proximity Voltage Detector is a non-contact detector with seven standard voltage ranges from 120V to 69kV. When voltage is detected, the PRX-69D gives an audible and visual indication with a typical detection distance of 10 inches. The PRX has the ability to detect voltage on most elbow test points at the 120V setting. With a rechargeable internal battery, the PRX can be charged quickly from 12VDC automotive outlets or from 115-240VAC. The rechargeable battery sealed inside the PRX-69D is a lithium-ion type, the same battery typically used in smart phones and other portable electronics. It is however, substantially larger in capacity resulting in much longer life for the PRX. Internal circuitry prevents overcharging and protects the battery from excessive temperatures. The battery is sealed inside the device, providing maximum protection. Other key features of the PRX battery system are: • If the battery is low, a quick 15 minute charge provides over one full day of use • PRX battery life on a full charge is one week of continuous use • A full charge takes only three hours
www.linestar.ca
Proximity Voltage Detector Features • Seven standard voltage ranges from 120V up to 69kV • Detects voltage on most elbow test points • Detects voltages 10” (25 cm) or greater from the source • Rechargeable battery with quick recharge - 15 minutes for a full day of use • Heartbeat signal assures that the PRX is ready to detect voltage • Rugged, durable housing • Dual hotstick connections - universal spline and shotgun stick • Loud beeper and LED lights indicate voltage • Weighs less than 1 pound (0.45 kg) • Easy to use electronic touch pad with large buttons • Custom voltage ranges available upon request • Can be used on 50Hz and 60Hz systems
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
241
VOLTAGE DETECTORS
meters & testers
PRX-4 Proximity Voltage Detector
The PRX-4 Proximity Voltage Detector provides utility professionals, arborists and first responders with a safety tool that will alert them to potentially dangerous high voltage in their work areas. The PRX-4 is a non contact detector with two voltage ranges: • 50V – 4kV, 3” (8cm) detection range • 4kV – UP, 10” (25cm) detection range The PRX-4 utilizes a rugged, durable, water resistant housing with dual hotstick connections - universal spline and shotgun stick. All of this is achieved while weighing less than 1 pound (.45kg).
Proximity Voltage Detector Features • Sealed to resist water penetration in typical outdoor environments • Two voltage ranges from 50V to 4kV and above 4kV • Detects voltages typically 3” (8cm) from the source at the 50V setting and 4kV at 10” (25cm) at the 4kV setting • Higher voltages result in greater detection distances • Rechargeable battery with quick recharge - 15 minutes for a full day of use • Heartbeat signal assures that the PRX is ready to detect voltage • Rugged, durable housing • Dual hotstick connections - universal spline & shotgun stick • Loud beeper and LED lights indicate voltage • Weighs less than 1 pound (0.45 kg) • Easy to use electronic touch pad with large buttons • Can be used on 50Hz and 60Hz systems
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
meters & testers
242
VOLTAGE DETECTORS WM-01 Watchman Work Area Voltage Detection Awareness and early warning - anytime, anyplace and for any reason…
The WatchmanTM Work Area Voltage Detector, model WM-01, utilizes WAVi Work Area Voltage Indication technology to detect strong electric fields surrounding high voltage conductors and power distribution equipment. Typically placed in the vicinity of power lines or high voltage equipment, the Watchman Detector provides an extra level of safety for trained personnel working on or near high voltage systems.
www.linestar.ca
Features • The Watchman Detector can be activated to visually alert to the presence of an electrical field and can also alert crews that they no longer have active power in the area. • Spinning LED lights indicate an electric field and a nearby energized conductor. • Power button serves dual function, press once for on/off function, hold down for self-test to verify battery power and proper functioning of Detector. • Once turned on, the Watchman Detector provides a “heartbeat” pattern to indicate it is actively checking for the presence of high voltage electric fields. • Powerful neodymium magnets allow the detector to be mounted to accessory brackets or any magnetic surface.
Features • Alerts user to proximity of high voltage • Audible and visual alarms increase in frequency the closer the user gets to energized equipment • Typical V-Watch warning distance is about V-Watch with C-10 and NEW C-10FR Case Lanyards 7 feet (2.13m) from a 4kVAC conductor Worn on the outside of your clothing at mid-torso, the V-Watch® • Provides another level of safety for storm Personal Voltage Detector provides that extra level of safety by restoration workers and first responders detecting and alerting you to the presence of electrical fields or • Low battery indicator energized electrical equipment. In emergencies, you and your • Field replaceable 9V battery crews can move in safely to quickly restore power to your • Rugged protective housing customers. The V-Watch® is available in both a standard model • Built-in self test and a pro model with a mute feature. Each comes in a tough • Lightweight nylon carrying case lanyard that is worn around the neck during use. • Carrying case lanyard - Two versions available - can be used The C-10 Series Carrying Case Lanyards for V-Watch® Personal with any V-Watch models, old or new Voltage Detectors combines the carrying case and lanyard into a - New C-10FR carrying case lanyard - single case. The Carrying Case Lanyard is designed to leave the high-visibility safety green shielded V-Watch® mounted inside and offers the dual feature of protecting material with an outer layer of flame the V-Watch® when not in use and acting as a lanyard for the resistant material V-Watch when in use. The V-Watch® will not work inside the closed, - C-10 carrying case lanyard - black zippered Carrying Case Lanyard because the case is shielded and shielded material will block all electric fields. - Electrically shielded - Storage case when the V-Watch is not There are two versions of the C-10 Carrying Case Lanyard available. in use The C-10 Carrying Case Lanyard is made with a black shielded - Lanyard allows user to adjust to material. The NEW C-10FR Carrying Case Lanyard is made with a optimum mid-torso position high-visibility safety green material that is shielded with the added benefit of an outer layer of flame resistant material. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
243
Phasing Sets
meters & testers
DDVM-40 DoubleVision Dual Display Digital Voltmeter
The Double VisionTM Dual Display Digital Voltmeter, model DDVM-40, is a compact, high accuracy dual display voltmeter and phasing set with capacitive test point mode and peak hold. Voltage is displayed on the two large, bright LED displays that can easily be read from a distance or in bright conditions. The two LED displays are synchronized so that the same voltage reading is shown on both displays. The DDVM-40 measures voltage from 5V to 40kV. The two stick design can be used in both overhead and underground applications – accurate & repeatable to within 1%. Double Display is Key - Oversized, bright LED read out on two displays makes voltage measurements easy to read from a distance or in low light conditions. Versatility . . . Simplified Single button interface controls all modes: • Line to line measurements • Line to ground measurements • Capacitive test point • Cable fault testing • Real time & peak hold reporting
DDPM-40 DoubleVision Dual Display Wireless Phasing Voltmeter
The Double VisionTM Dual Display Phasing Voltmeter, model DDPM-40, is a compact, highly accurate wireless voltmeter and phasing set with capacitive test point and peak hold modes. The DDPM-40 will show the leading or lagging phase as well as the phase angle during wireless phasing operations. The DDPM-40 measures voltage from 5V to 43kV. The two sets can be used in both overhead and underground applications - accurate and repeatable to within 1%. Voltage is displayed on the two large, bright LED displays that can easily be read from a distance or in bright conditions. The two LED displays are synchronized wirelessly so that the same voltage reading is shown on both displays. Usage of the DDPM-40 is an ideal solution for taking measurements over larger distances, up to 100 ft, via wireless communication. Wireless Communication is Key - Oversized LED displays communicate wirelessly to make voltage measurements and phase identification easy, especially when working over a distance across switches.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Versatility . . . Simplified Single button interface controls all modes: • Line to line measurements • Line to ground measurements • Capacitive test point • Phase angle • Real time & peak hold reporting
meters & testers
244
Phasing Sets TAG-5000 Wireless Phaser
The TAG®-5000 Phase-Free® Wireless Phaser provides a unique method of phasing across a single-phase or three-phase system to make certain that correct polarity has been established prior to “closing-in” a switch. The TAG-5000 consists of two units, a transmitter and receiver, which communicate via a radio frequency signal, thus eliminating the need for a connecting cord found on traditional phasing sets. Since the units communicate via radio signals, the range of operation is extended to more than 33 feet through the air and over 1,000 feet along overhead conductors and can operate through walls or partitions. The TAG-5000 can be used for all overhead and underground phasing applications with appropriate underground probes and is ideal for use at higher voltages – up to 230kv – where safety and ease-of-use are prime considerations. In operation, the transmitter is placed in contact with an energized conductor. The transmitter first acts as a voltage detector by emitting audible and visual indications. After the voltage detection sequence, the transmitter then begins to transmit a signal to the receiver. The receiver is then placed in contact with another energized conductor. The receiver processes the signal and indicates if the conductors are “in” or “out-of-phase” by emitting both audible and visual alarms. The TAG-5000 design offers several advantages and increased safety over conventional phasing equipment such an extended range of operation - more than 33 feet through the air and up to 3,000 feet along overhead conductors. The TAG-5000 has a lightweight design, can operate on voltages up to 230 kV and can easily be operated by one person.
Meters & Testers CL2500 1000A AC/DC TRMS Clamp Meter
GRT1000 Personal Ground Tester Clamp-on ground rod/wire resistance tester, designed for loop grounding systems to provide easy and accurate resistance ground measurements.
• Extra wide jaw opening accommodates a greater measuring area. • True RMS accurate readings for all signals. • Worklight in jaw area. • Magnetic Mount on back secures meter and frees hands. • Non-Contact Voltage Tester. • Backlit display is brighter than most competitive units. • Measures capacitance; great for HVAC work. • Analog bar graph. • IP42 • 3.3 feet / 1 meter drop protection. • CAT IV safety rating for 600V.
VM-560 Pipe and Cable Locator
www.linestar.ca
The VM-560 pipe and cable locator is general purpose locators used to detect buried pipe and cable services in a variety of situations. The VM560 has achieved a compact and lightweight design without compromising strength and performance. With a choice of passive power locating and active 8kHz and 480kHz frequencies the VM-560 is designed to meet the requirements of those wishing to detect the presence of active power cables and also wishing to trace short ranges. It is particularly useful in helping to detect and trace short distance drop wires. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
245
Meters & Testers
Used for overhead and underground testing. The digital display reads in kilovolts and has a lighted background feature. The tester comes with 2 hooks and storage case. Order bushings, hi-pot adapter and extension resistors separately.
6703
6702-1
Pair of Extension Resistors, 40kV
Bushing Adapter 15/25kV
meters & testers
6702 40kV Digital Phasing Tester
6702-1
Bushing Adapter 15/25kV
6702-2
Hi-Pot Adapter 35kV
HVDC-L/-H Voltage Detector
Single pole voltage tester for Direct Current 20 - 800 kV • DC indoor and outdoor system. • Polycarbonate shell. Active and passive electrode of aluminium. • Sound indication by piezo • Light indication by 1 red diode. • Voltage range: 20 - 800 kV, to be specified. Built in ”All-check” test feature provides checking of all electronic and battery level. Green light indicate that the unit is ready (The unit is ready for measurement with or without self-testpermanent stand-by mode). • Dimensions: Ø 90 mm. Power supply: 4 pcs 1.5 V alkaline battery type LR6. Temperature.: -25 °C - +45 °C Weight: 0.9 kg
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
meters & testers
246
Meters & Testers ET-200 Electronic Voltage Tester
44030 Phase Sequence Indicator
• Solid state design is safer than solenoid testers. • Low impedance to reduce false readings. • Indicates voltage without battery. • Voltage indicated by lights, vibration and tone. • Bright worklight to illuminate your workspace.
Can be used on 3-phase, 3-wire, circuits from 60 to 600 volts and on 25 to 60 cycle current.
44050 Carrying Case
Fluke 376FC True-rms AC/DC Clamp Meter with iFlex™
Included accessories: • 18” iFlex™ flexible current probe • Coated instruction card • Safety information sheet • Soft carrying case • TL75 test leads • 2 AA Alkaline batteries
Solenoid Voltage Testers
• CAT III - 600V • Extremely rugged and reliable • Vibrates when voltage is present • Tests for AC Voltage • Tests for DC Voltage • Replaceable leads with shielded probe tips • Bright long-life LED and neon indicator lamps • Dual voltage indication for backup safety • 5-year warranty 61-065 Vol-Test® Voltage Tester 61-076 Vol-Con® Voltage/Continuity Tester
www.linestar.ca
Fluke T+PRO Electrical Tester
The T+PRO Electrical Testers offer all the functionality that electricians look for in volt meters and voltage and continuity testers: • Three ways to detect AC/DC voltage: light, sound, and vibration • Added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight • The T+PRO Electrical Tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KOhms, as well as a backlit LCD display for easier viewing Safer than traditional solenoid testers: • Solid-state tester design • CAT IV 600 V, CAT III 1000 V rated • Complies with NFPA 70E* Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
247
Meters The Stray Voltage Detector, model LV-5, is used to detect stray voltage as low as 5 volts which may be present on any electrically conductive surface such as street light poles, guide guy wires, wood transmission poles, meter cans, manhole covers and many other metallic surfaces in and around electrical utilities. This newer LV-5 has a bigger, more robust grip, a brighter LED indication that improves daylight visibility and has a tester built into the holster to quickly test the detector on a known voltage source before and after use. Otherwise it operates the same as the LV-S-5. The Detector operates by holding it with a bare or gloved hand and directly contacting the metal tip of the Detector to the potentially energized source. The LV-5/K01 is supplied with a belt clip holster, allowing the user to carry the LV-5 in the holster on their belt. The holster also includes an integrated tester that supplies a low voltage AC signal for testing the LV-5 before and after use.
meters & testers
LV-5 Stray Voltage Detector
Two optional accessories are available for the LV-5. The Extension Handle extends to the reach of the LV-5, allowing the Tester to test equipment on the ground or hard to reach locations. The Ground Shield is used in areas where high voltage lines or other energized conductors are present. Stray Voltage Detector Features • Low threshold voltage sensing design picks up voltages from 5 VAC to 600 VAC with direct contact and above 600 VAC at a distance • Ultra bright, long-lasting red LED indicates when voltage is present • Detector is always on, ready to use, and operates on two AA alkaline batteries (batteries required) • Rugged, utility-grade design is waterproof • Tester integrated into the holster provides a visual indication of the test. Supples a low voltage AC signal for testing before and after use • Optional Extension Handle extends the Detector’s reach for testing equipment on or near the ground or other hard to reach locations • Optional Ground Shield used in areas where energized conductors are present and interfere with normal voltage tests
IT-4 Insulator Tester in Use
The Hi-Test® IT-4 Insulator Tester detects non-visible insulator failures before they cause operations difficulties or safety threats to line crews. The Insulator Tester can be used as a routine maintenance tool to test insulators quickly, safely and reliably. It can be applied to any in-service transmission or distribution insulator and at any voltage, provided there are two or more insulators between conductor and ground. It can also be used to test de-energized insulators prior to installation. Insulator Tester Features • • • • • • •
Universal spline for attachment to a hotstick Built-in gigohmmeter applies a current limited 10kVDC potential across an insulator Buzzer provides audible warning of bad insulators LED scale displays the condition of the insulator being tested Powered by an 8VDC rechargeable battery Rugged carrying case included Lightweight - weighs approximately 3 lbs. (1.35 kg)
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
meters & testers
248
Meters RT-200 Rope Tester
The Hi-Test®Rope Tester is designed to test hot line ropes, slings and straps for dielectric integrity at the time and location they are being used. Ropes with diameters ranging from 3/8” diameter (9.5 mm) to 1-1/2” diameter (38 mm) can be tested along with slings and straps of various sizes. Rope Tester Features • Continuously test any length of rope or straps • Dielectric condition is displayed by green (good) or red (bad) LED’s • Powered by a rechargeable battery • Audible buzzer sounds if defective sections of rope is found • Small, portable and easy-to-use
Transformer Testers NEW ClearTest® Transformer Tester
The ClearTest® Transformer Tester provides quick and easy tests of de-energized power distribution system transformers. It is a handheld device with a single pushbutton that provides a clear indication of open circuits, short circuits, including shorted turns or shorted windings and confirmation that the test results are OK. The ClearTest® is a completely new design that briefly energizes the transformer and takes a snapshot of the transformer condition by measuring the voltage, current and power factor of the test signal. The ClearTest® finds transformer defects that include: • A single shorted turn in the primary or secondary side of a transformer • Open coils or blown internal fuses or breakers • Partial shorts including shorted turns, shorted turn layers, coil to core shorts and primary to secondary shorts • Bad transformer ratios resulting from shorted turns
www.linestar.ca
ClearTest® looks both inside and outside the transformer - testing the coil, core and winding as well as between the transformer and whatever it is connected to. Transformer Tester Features • Finds internal transformer defects before energizing • One tester for all transformer types • Test the primary and secondary sides of de-energized transformers without disconnecting • Tests all connections from transformer to meter • Improve SAIDI statistics by quickly testing and getting the transformer back in service • Prevents line workers from installing a fuse on a shorted transformer • Quickly verifies the secondary connections are not shorted • Compact, lightweight and easy-to-use • Powered by two 9V field replaceable lithium or alkaline batteries • Audible alarm confirms successful test • Built-in self test • A magnet is included to hold the ClearTest in place while testing
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
249
Transformer Testers
meters & testers
TILT II Transformer Tester
The TILT II Transformer Tester is a versatile tool for quick and easy checks of transformers and the connections made to them. In the field, the TILT II is used to test the primary and secondary sides of new or reworked, single or three-phase transformer installations for short circuits prior to energizing. In the shop, the TILT II is used for the quick screening of incoming and outgoing transformers for both primary and secondary shorts or opens, including internal fuses and breakers. A magnet is available to hold the TILT II in place while testing. Transformer Tester Features • Tests transformers for major defects before energizing • Tests the primary and secondary sides of de-energized transformers without disconnecting • Built-in self-test feature (manual or auto self-test models available) • Single button automatic testing • Audible alarm confirms successful test • Super bright LED indicators
6793 Hastings Transformer and Capacitor Tester
- Utilized to test the condition of transformers and capacitors before placing them into service - Test new transformers and capacitors, plus trouble shoot in-service units - Provides operating personnel a safe and reliable method to verify that transformers or capacitors are not shorted or open prior to energizing - Detects failures in equipment before loading and transporting to the job site - Eliminates the blowing of cutout fuses to determine the condition of equipment - Magnetized back allows hands to be free to install and remove cables and clips. Light weight. Has built in push button test feature prior to applying it to equipment. Four bright LED lights signal the condition of the equipment being tested - Tester can be used to verify that secondary services are not shorted prior to energizing the transformer - The T&C tester is powered by a 9 volt battery - Can be used to -40° C
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
- Housing is weatherproof, high-impact resistant plastic
meters & testers
250
specialty Test Equipment LCI - Live MV cable identification system
The LCI-E transmitter is connected to the secondary side of a distribution transformer to identify the medium voltage distribution cable located anywhere between the transformer and its source. The LCI is used on isolated distribution cables. The equipment identifies the cable before cutting off the voltage prior to an intervention allowing saving time and money. The transmitter drains an electric current at a specific frequency that can be detected on the cable section between the source and the transmitter’s termination point (transformer). Detection is possible on high-load cables. The detector uses a magnetic sensor located at the tip of the enclosure and filters out network harmonics. Main features: • Dual frequency efficient technique • The safest technique on the market • Detection by digital processing • Single or three phase applications
• Easy to install and operate • Transmission on live cables • High-resolution detection frequencies
VCI-3 - Voice Cable Identification System
The VCI-3 uses a current injection technology. The current is injected through the wire conductors by magnetic transducers. Grounding is required at one or two of the three-phase circuit ends, which can stay in place during the intervention to ensure maximum operator safety. The detector’s unique tone sensing system guarantees flawless and safe identification and tagging. The VCI-3 is a compact device that is very easy to use. The tone transmitter integrates a speaker and a microphone to record the vocal identification message. The transmitter uses direct connection injection wires or three clamps for magnetic clip current injection. The clamps produce current in the wire even if it’s installed on the wire sheath. Thanks to its rechargeable battery pack, it can provide more than eight hours of continuous work. A detector, highly compact, that uses a magnetic sensor. It has a speaker with adjustable volume and compatible earphones to listen to the vocal identification message even in the noisiest of environments. Sensor detection threshold according to cable type and length is adjustable through key buttons. Detection is guaranteed by a digital processing system that checks for the presence or absence of every tone that comes in from the transmitter end. ndb Technologies unique process guarantees a safe, precise and flawless detection. Main features: • Unique balanced injection system that eliminates signal feedback on other wires • Three different tones to identify each phase • Easy to install and operate • Extended range: up to 6 miles of working distance • Tone transmission for more than 8 hours • Lightweight and compact • Optional magnetic sensing transducer • Phase detection by transmitter tone presence or absence • Digital filtering of network harmonics
www.linestar.ca
DOC-2000 - Distribution Transformer Tester
• For transformers up to 167 KVA Single or three phase (Polemount or Padmount) • Measurement by contact on the transformer primary bushing and Neutral/Ground • Used on de-energized transformer. • Detects primary transformer short-circuit, open circuit & secondary short circuits. • Visual and audible warning. • Automatic self-test & Auto shut-off • Low battery indicator • Operating temperature -25C to +55C. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
251
Temporary Power Restoration Devices
Get Your Customer Back Online NOW! Get your customers electricity back on in minutes, not days. Eliminate hassle and liability of temporary above ground cabling. Find Secondary Faults on YOUR time, not the cable’s time.
meters & testers
Servisavor® Series of Temporary Power Restoration Devices
The Servisavor® is a highly mobile unit designed to temporarily restore power to customers who have a single faulted conductor. By connecting the servisavor between the customers meter socket and his meter, power can be restored without immediately locating and repairing the cable fault or running temporary above ground conductors. The Servisavor® restores load current on an open hot leg up to its current rating. On an open neutral the Servisavor® restores full service up to its current rating in neutral current.
Breaker Box of Metered Unit
Meter Adapter with Neutral Pigtail
Model 25E
VON Servisavor® Specifications
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Model Model Model Model Model Model Model Model Model 15 15M 15E 20 20M 20E 25 25M 25E Auto Transformer 15kVA 15kVA 15kVA 20kVA 20kVA 20kVA 25kVA 25kVA 25kVA Rating Circuit Breaker 80 Amp 80 Amp 80 Amp 100 Amp 100 Amp 100 Amp 125 Amp 125 Amp 125 Amp Magnetic Magnetic Magnetic Magnetic Breaker Box Sealed Sealed Commercial Sealed Sealed Commercial Sealed Sealed Commercial Aluminium Aluminium Breaker Box Aluminium Aluminium Breaker Box Aluminium Aluminium Breaker Box Adapter Hanger Included Included Included Included Included Included 0-250 V Meter for Included Included Included Phase to Phase and Phase to Ground Voltages Weight 247 lbs. 247 lbs. 247 lbs. 290 lbs. 290 lbs. 290 lbs. 349 lbs. 349 lbs. 349 lbs. (112kg) (112kg) (112kg) (132kg) (132kg) (132kg) (158kg) (158kg) (158kg)
meters & testers
252
Fault Location Equipment XF Series Portable Arc Reflection System COMBINATION TDR, THUMPER HIPOT SECTIONALIZER CHOOSE 16KV/8 KV, 25KV/12.5 KV or NEW 28KV/14KV Features the fastest automatic tdr technology available in monochrome or color. Just switch on, push the green start button when prompted, and in less than 60 seconds unit displays distance to fault.
FAST 3 STEP OPERATION
DUAL THUMP CAPACITORS 1280/1563/ 1960/3126 J
HIGHEST JOULE RATINGS IN THE INDUSTRY*
COLD WEATHER OPERATION
WET WEATHER OPERATION
120 V OR BATTERY OPERATED
LARGE WIDE WHEELS FOR EASE AND STABILITY
BUILT IN BATTERY CHARGER
Other available options by special request:
www.linestar.ca
v.4 upgrade on XF16 or XF25 XF16-1526, 1526J @ 8kV & 16kV
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
253
Underground Utility Locators The vLocML2+ Receiver is an extended version of the popular vLocPro2 with the addition of the ability to locate buried electronic markers. The vLocML2+ comes with passive modes of Power and Radio, a range of preloaded active frequencies from 50Hz to 200kHz, Sonde Mode, SD (Signal Direction) mode and Electronic Marker modes. The vLocML2+ has an internal memory to store over 1000 records of data. The vLocML2+ can be used in three configurations suited to the task at hand. The Line/Marker mode for all the functions for general pipe, cable and sonde locating and where all markers attached to lines are shown with depth. The Dedicated Line Location mode where all the functions for general pipe, cable and sonde locating are active and the dedicated Marker Mode for just marker locating.
Features: • • • • • •
Large full-color screen Left/Right locate arrows Bluetooth and GPS options Compass line direction indicator Rechargeable and alkaline batteries Auto depth readout of buried markers
meters & testers
Vivax vLocML2+ Locator
The vLocML2+ Receivers accessory socket can enhance the locating experience with accessories such as the A-frame Fault Locator to pinpoint faults and cable cuts and the Remote Antenna to act as a stethoscope to positively identify a cable when in a tray.
Transmitters
A wide range of transmitters are available for use with the vLocML2 receiver
Loc-1Tx (1 watt) transmitter
Loc-5STx (5 watt) transmitter
Loc-10Tx (10 watt) transmitter
Vivax vLocPro2 Locator
The vLocPro2 utility locator receiver was designed to meet the tough requirements of the modern world. With more and more utilities being buried each day and also abandoned each day, it truly is a jungle beneath the ground. Today’s locator must not only trace the path of a buried utility, it must assure the user that the locate is beyond the shadow accurate. The vLocPro2 is the tool that will give you the same results time after time with speed and, accuracy which leaves you confident in the decision to put the paint mark on the ground. The vLocPro2 series locator is the locator of choice for the contract locating professionals.
Features:
Alberta: British Columbia: Manitoba: Ontario:
The accessory socket on the vLocPro2 receiver adds the accessory options of: - Plug-in A-frame Fault Locator to find cable sheath and pipeline coating faults. - Stethoscope Remote Antenna for positively identifying a line where many lines are together.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
• More than 40 hours of battery life • IP54 construction for all weather use • Ergonomic lightweight design at only 4.6lb/2kg • Can use with rechargeable or alkaline batteries • Lightweight rugged ABS & carbon fiber construction • Link a range of GPS devices to the receiver via Bluetooth • Free MyLocator2 configuration and fleet management app • SD (Signal Direction) positive line identification mode for congested areas
The vLocPro2 utility locator receiver has more than seventy active frequencies from 98Hz to 200kHz as well as several passive modes such as broad and narrow band power and VLF radio and SD (signal direction). Once the target line is located use the compass feature to quickly trace the line by following the compass line.
meters & testers
254
Underground Utility Locators vLoc-5000 Locator
The vLoc-5000 utility locator brings an innovative element of digital signal processing, position capturing and broadband frequency selection to buried utility locating. Data captured by the internal GPS or external GPS via Bluetooth can be downloaded for further analysis, use with GIS systems or google maps. Use the free VM-MAP smartphone application to create real-time maps with GPS data and data from the locator such as time, depth of cover or current on the line. • Broadband frequency selection • Built in Bluetooth communication • High-capacity Lithium-Ion battery • Bright daylight readable receiver display • Digital signal processing in receiver and transmitter • Sheath fault locating for telecom and power lines (with accessory A-frame)
VM-810
Metrotech, one of the original names in Pipe & Cable locating, has been producing the well tried and tested 810 for over forty years. The instrument includes a distance sensitive left/right guidance systemTM (pioneered by Metrotech) to provide accurate easy locating. The 810 are the locators of choice for many Customers around the world. We continue to sell impressive quantities of both. Over recent years components for these products have been made obsolete, increased in cost, and are increasingly becoming difficult to find. This presented the challenge of designing a new VM-810 without losing the features and performance that made it successful. We believe we have met the challenge the new VM-810 combines the classic look with stunning simplicity and performance - if you liked the classic 810’s you will love the new one. The NEW VM-810is designed specifically as a single frequency true left/right locator with separated twin response left/right antennas.
vCam-5 Camera System
The vCam-5 inspection system from Vivax-Metrotech gives you the flexibility to cover a range of inspections including indoor drain lines, municipal collection systems, residential plumbing, indoor commercial lines, and lateral lines from three inches up to eight inches in diameter. Our camera systems use the latest technology packaged in a rugged, lightweight, compact profile made specifically for the harsh conditions related to sewer lateral inspections. All Vivax-Metrotech camera systems are backed up by a full one year warranty, on-site training and local support through our dealer network.
vCamMX
www.linestar.ca
The vCamMX mini inspection system from Vivax-Metrotech gives you the flexibility to cover a range of inspections including indoor drain lines, residential plumbing, indoor commercial lines, and lateral lines up to four inches in diameter. Our camera systems use the latest technology packaged in a rugged, lightweight, compact profile made specially for the harsh conditions related to sewer lateral inspections. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
Underground Utility Locator accessories
The A-frame accessory is used to detect ground faults on pipes and cables. In the case of pipes, the faults consist of coating defects. In the case of cables, faults are usually caused by insulation damage allowing the metallic sheath (or internal conductor) to become in contact with the ground.
meters & testers
A-Frame
255
VM-510FFL Standalone A-frame
Finding the location of an underground cable fault just became easier with the VM-510FFL Standalone A-frame locator. Now locating a suspect cable and finding the fault can be done with the VM-510FFL and a compatible transmitter. There is no longer a need for a separate utility locator with cables connecting to it. After connecting a compatible transmitter to the line and placing it in a Fault-Find mode, use the simple to operate four button controls of the VM-510FFL to locate and stay on the cable path while pinpointing the sheath or ground fault. The robust design includes a high contrast LCD with automatic backlight and weatherproof speaker for both visual and audio indicators. The lightweight carbon fiber material is suited for continuous usage on long cable runs to locate the line and pinpoint the faults.
Sonde
Sondes are battery powered transmitters used to trace the path of both non-metallic and metallic pipes and ducts. A receiver in sonde mode tuned to the same frequency can locate the position and depth of to the sonde.
D18-33-SR44
D38-33-AA
D64-33-LR61
• Dimension: 1.5” (38mm) x • Dimension: 2.5” (64mm) x 4.1” (105mm) long 7.3” (186mm) long • Frequency: 9.82 kHz, 33 kHz, 83 kHz • Frequency: 9.82 kHz, 33 kHz, 83 kHz • Range: 16.3ft (5m) • Range: 26ft (8m) • Battery: 1 x AA battery • Battery: 1 x LR61 battery
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
• Dimension: 0.7in (18mm) x 2.48in (63mm) long • Frequency: 33 kHz • Range: 15ft (4.5m) • Battery: 2 x button cell batteries • End cap: eyelet, 10mm studded
Underground Utility Locator accessories
meters & testers
256
Live Plug Connector (LPC)
The LPC separation filter is used to safely inject a locate frequency onto a live cable via a domestic power socket to trace the services from the building to the connection in the street. It is suitable for connecting to voltages between 100V AC and 250V AC.
Loc-10Tx Power Lead • to power (NOT charge) the transmitter from a vehicle • 30ft (10m) long cable
Loc-10Tx Battery Tray
Loc-10Tx batteries with tray
Receiver Vehicle Charging Lead
The Receiver Vehicle Charging Lead, 12ft (4m) long lead to charge the receiver’s battery (or Aux Battery pack) while on the move.
Remote Antenna SIS
The SIS remote antenna is a mini antenna that connects to the vLoc-5000 receiver for line tracing or cable identification. Equipped with Signal Select, the SIS remote antenna becomes a powerful tool that easily identifies a particular cable on a cable tray or where cables are bunched together by providing a visible positive or negative icon (+ and -) and an illuminated top or bottom bezel on the receiver’s operational interface.
VX5/125 Clamp
VX4/100 Clamp
• To apply the transmitter signal to a target cable when no access to the conductor is possible • 5” (125mm) diameter
www.linestar.ca
• To apply the transmitter signal to a target cable when no access to the conductor is possible • 4” (100mm) diameter cable
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
257
Standard duty tools are used for installing anchors at torques up to 10, 000 ft-lbs. “Tough One” series tools install anchors with up to 15,000 ft-lbs of torque. The kelly bar adapters and locking dogs come complete with nuts, bolts and pull pins.
630012HD
*Tough One Kelly Bar Adapters Kelly Bar PART # Size C303-0936 Hex C303-0937 Hex C303-0940 Hex C303-0955 Square C303-0958 Square
Kelly Bar Size 2-1/2” 2-5/8” 3” 2-1/2” 3”
Weight 23 lbs. 23 lbs. 27 lbs. 22 lbs. 23 lbs.
Standard Duty Kelly Bar Adapters Kelly Bar PART # Size 630013 Hex 630011HD Hex 630012HD Hex 630014 Square 630015 Square
C303-0020 8” Drive Tool
Kelly Bar Size 2” 2-1/2” 2-5/8” 2-1/4” 2-1/2”
Weight 10 lbs. 18 lbs. 18 lbs. 13.25 lbs. 13.25 lbs.
anchoring & pole setting
Anchor Installing Tools
C303-0069HD Locking Dog Assembly
Standard Duty for installing SS5, SS150 & RR anchors.
Standard Duty
C303-1035 8” Drive Tool
*Tough One Series for installing SS5, SS150 & RR anchors.
C303-0981 Locking Dog Assembly *Tough One Series
C303-0983 7’ Drive Tool
Tough One Series for 1-1/2” Anchors
C303-1064 7’ Drive Tool
Standard Duty for 1-1/2” Anchors
SAT-80 Anchor Tool
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
C102-1583 7’ Drive Tool
Standard Duty for 1-3/8” Anchors
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
This tool slips over the pilot bit and is used for installing no-wrench screw anchors without removing the auger. Use only on pressure diggers and for installation only. Do not use this tool for the removal of anchors.
anchoring & pole setting
258
torque monitoring & data logging system 98% Accurate Torque Measurement and Data Logging System for Helical Pile Installers CTS Cables are Rugged & Dependable Featuring: • Amphenoni mil-spec connections Thread together for positive retension • Overmolded connectors Strong & enviromentally sealed • Rugged cable assemblies Steel braided for added durability
Main Cable: Connects Pin to Display - available in 65ft., 25ft. & 15ft. lengths
Main Extension Cable: Adds length to Main Cable - available in 25ft., 15ft. & 5ft. lengths
www.linestar.ca
Jib Cable: Allows Easy Seperation at End of Bottom - available in 15ft., 10ft. & 5ft. lengths
TORQ_PIN is a revolutionary new torque monitoring and data logging system that can fit any type of drive head. Where conventional hydraulic reading can be 30-50% out, the TORQ-PIN monitoring system offers true torque readings that are 98% accurate! TORQ-PIN works simply by replacing your current pin with a new load cell. There is absolutely no loss of boom height which can occur with other systems. • Torque measurement from very accurate & reliable strain gages (>98% accuracy) • Systems available for all major OEM drive heads - up to 367,000 ft/lbs. • No longer reliant on notoriously inaccurate hydraulic pressure differential systems. • No loss of “stroke” - unlike “Spool” type systems our product simply replaces OEM pin on drive head. • Patent pending technology to eliminate the effects of perpendicular force on the strain gages. • Inclinometer included in every Torq-Pin package • Calibration report with each Torq-Pin - proving accuracy claimed traceable to NIST standards. • Durable, wired connection eliminates the need for batteries (as in wireless systems) • Electronics are completely sealed from the environment • Torque signal output is digital (SAE J1939 CANBUS) impervious to signal interference unlike analog systems. • Microprocessor & RAM inside pin head contains all calibration data for the pin - meaning your choice of display (8.4” or 4.3”) is literally - “plug and play” • Pins to replace all major drive head OEM’s • Mechanically engineered with a minimum 2:1 safety factor (using OEM sizes) • Rugged, mil spec electronical connections
Junction Box: Allows Laser Range Finder Connection Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
259 anchoring & pole setting
pole tongs
Lifting Tongs
Lifting tongs are proof-tested and certified for overhead lifting and are painted orange.
At 75° Opening At 135° Opening At 180° Opening PART # Opening Cap. (lbs) Opening Cap. (lbs) Opening Cap. (lbs) 40008 3-1/2” 1,500 12” 1,000 16” 750 40218 6” 2,500 17” 2,000 20” 1,500 40228 7-1/2” 2,500 20” 2,000 25” 1,500 40458 8-1/2” 3,000 27” 2,500 32” 2,000 40558 12” 5,000 32” 4,000 36” 3,000
Chain Pole Slings
Made with 9/32” GR100 CO Chain. These are ideal for handling of wood pole. WLL 4,300 lbs Vert. WLL 3,500 lbs Choke.
Heavy-Duty Lifting Tongs
Chain Overall Part # Length Length 9324 9325 9326 9327
4‘ 5’ 6‘ 7’
Timbers or poles are held securely by the 1-1/4” triple saw tooth design and cannot slip under load.
5’ 6’ 7’ 8’
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
Max PART # Opening Cap. (lbs) 20 11-1/2” 7,500 30 16-3/4” 10,000
anchoring & pole setting
260
Pole Setting Tools Peavies
Made with hardwood handles and heat treated, high-carbon steel hooks. Different handle & hook combinations are available.
PART # Handle Hook # 150109 2-1/2” x 4-1/2’ 480 150110 2-1/2” x 5’ 480
Replacement Peavey Handle 150080 2.5” x 4.5’ 150081 2.5” x 5’ RC200TA Light Weight Hot Pole Tongs • Fits pole 7” to 16” diameters • Lighter, easier to use tool. The change to the aluminum head and smaller handles has dropped the weight more than half to 8 lbs and make the tongs much easier to use with rubber gloves.
4241 Pole Cradle
Provides an efficient way of lifting poles into position for framing. It measures 18” x 15” x 9 and weighs 23 lbs. It can handle poles with diameters up to 19”.
POLE PROP
The innovative PoleProp™ makes utility pole framing and installation easer and more cost effective, but that’s just the beginning...
www.linestar.ca
•Productive - increases productivity by allowing the pole to be framed while freeing the truck for other functions • Lightweight - only 33 pounds • Strong - supports poles from 30’ to 70’ • Stable - whether on even or uneven ground • Compact - folds to 3” x 23” x 30” for easy storage • Safe - eliminates stooping and kneeling. The safe height prevents drill bit ground contact and pro vides ample clearance to frame the pole
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
Wooden handle tools are made of Ash hardwood and carbon steel blades that are forged and heat-treated.
Straight Shovels, 10” Blade
261 anchoring & pole setting
Long Handle Digging Tools & Digging Bars
GFPS10 Garant Post Hole Spoon, Forged, 10ft Handle
PART # Length 2035 10’ 1008 Replacement Handle
Post hole spoon, solid shank and forged steel blade, 10-ft. (3.05 m) ash handle. Also available with an 8-ft. (2.44 m), 9-ft. (2.75 m) or 12-ft. (3.66 m) handle.
F9510 Garant 10 foot Replacement Handle
DB-110 Digging Bar
1” x 10’ Hex Bar with 2” chisel and pointed end.
852 Digging Spud & Tamper
1” x 9’ steel pipe with 3-1/2” wide blade and oval tamping head.
Heavy- Shoe Tampers
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
PART # Length 1055 8’
anchoring & pole setting
262
Pole Setting Tools
The Dirt Skirt 10’ x 10’ Dirt Sling
The unique design of this tarp captures auger spoils and neatly fills the hole after setting a pole. It reduces time and labor and the risk of injury.
Twistarp Dirt Sling
Used to hold the dirt removed from an auger to be used when backfilling around a newly installed pole. Also works well as a utility blanket keeping personnel and tools out of weeds, mud and snow or for transporting left over dirt, rock sand or wet cement.
PART # 6X6R 7X7R 8X8R 10X10R
Size 6’ x 6’ 7’ x 7’ 8’ x 8’ 10’ x 10’
Stapul Sticks
www.linestar.ca
Keeps staples ready for use and helps prevent possible punctures to rubber gloves. Easy to use while wearing heavy gloves. Two loaded sticks hold enough staples to install a ground wire on most distribution poles.
574 3/4” wide slots 574L 1” wide slots
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
1025A Two-Wheel Steerable Dolly • • • •
180 degree steering • Low-pressure turf tires • Only 32” wide Supplied with a straight handle for easy movement Constructed with high-yield strength steel in excess of 100,000 psi Assembled with wheel bearings and bronze steering bushings
263
anchoring & pole setting
Two-Wheel Steerable Dolly & Accessories
Pole Dolly with Roller Cradle
Model 1025A Height (Overall With Cradle) 27-1/4” Width 32” Length (No Handle) 23-1/4” Steering 180 degrees Weight (Total) 157 lbs. Weight (Roller Cradle Only) 41 lbs. Capacity 2,200 lbs.
1125A Roller Cradle Assembly • Attaches in just seconds • Provides ready transport for poles up to 2,200 lbs. • Rollers are manufactured with ultra high molecular polyethylene
Load Deck and Dolly • Attaches in just seconds to the Two-Wheel Steerable Dolly • Offered with either a second Two-Wheel Steerable Dolly or Fixed-Axle Dolly and “T” Handle • Provides a system with a carrying capacity of 3,000 pounds • All components constructed with high-yield strength steel
PART # 1030A 1031A Height 24” 24” Width 32” 32” Length (No Handle) 97” 93” Deck Capacity 3,000 lbs. 3,000 lbs. Weight (Complete Assembly) 365 lbs. 314 lbs. Weight (Load Deck) 125 lbs. 124 lbs. Weight (Manual Two-Wheel Dolly) 116 lbs. ea 116 lbs. Weight (Fixed Axle Dolly) N/A 65 lbs. Weight (“T” Handle) 8 lbs. 8 lbs.
HA0075 Transformer Dolly
• Designed to maintain vertical positioning of the transformer - preventing leakage • Equipped with low pressure turf tires, engineered with a standard trailer hub and sealed bearings • Equipped with a third pilot wheel to allow 360º steering • The combination of the main wheel and third pilot wheel results in an extremely ergonomic design eliminating excessive arm strain for the user.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Height 44-3/4” Width 40” Length 39” Tire Size 165/65/-8 Capacity 950 lbs. Transformer Height - Standard Dolly 36” Max Optional Extension Attachment 44” Max
anchoring & pole setting
264
Pole Tampers
H4802 Hydraulic Pole Tamper
Makes quick work of setting poles, asphalt patching and general compacting. This model has the on/off valve on the whip hoses. It weighs 23 lbs and is 60” in length. The flow rate is 4-6 gpm with an operating pressure between 1,000 to 2,000 psi and can provide 1,160 BPM at 5 gpm. The kidney shoe is standard.
H4802-6 Hydraulic Pole Tamper Same as the H4802 but without the on/off valve on the hoses. 60” in length and weighs 27 lbs.
H4802-3 Hydraulic Pole Tamper Similar to the above tools but with the on/off valve on the handle. 72” in length and weighs 23 lbs.
H4802
H4802-3
TA54603 Hydraulic Pole Tamper
Ideal for soil compaction around utility poles. This model does not have an on/off valve. It weighs 39 lbs and is 66” in length. The flow rate is 3-9 gpm and provides 1,600 BPM. The kidney shaped shoe is standard.
TA54103 Hydraulic Pole Tamper Same as the TA54603 but with the on/off valve on the handle and an overall length of 71”.
www.linestar.ca
00840 6” Round Shoe Only
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
265
H4910A Hydraulic Pole Puller
This puller operates on both Open- and Closed-Center systems with pressures from 300 - 2,800 psi. It’s lifting capacity is 56,000 lbs with a 16.8” stroke. Two 5/8” x 6’ Proof-Certified chain are included. The cylinder weighs 101 lbs. Combined weight with base & chain is 178 lbs. Required fittings are listed below.
F011243 Nipple (2)
anchoring & pole setting
Pole Pullers & Pumps
F020196K Female Coupler, 1/2” NPTF F020197K Male Coupler, 1/2” NPTF
4001D Hydraulic Pole Puller
This unit has a maximum operating pressure of 2,800 psi and a lifting force of 50,120 lbs. The kit comes complete with the cylinder, base plate, back plate, swivel chain hook assembly and 6’ of 1/2” chain. Works great on concrete poles.
Pole Puller Specifications Hydraulic Cylinder 57 lbs. Base Plate 25 lbs. Back Plate 7 lbs. Swivel Chain Hook Assembly 36 lbs. Chain - 6 Feet - 1/2 Alloy 15 lbs. Operating Pressure 2,800 psi Max. Lift At Maximum Pressure 50,120 lbs.
HA0039 Pole Puller Pad
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
4040B
4041B
Back Plates for Pole Puller Sold separately Optional back plate prevents chain roll-up and slippage. 403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Engineered with the strength to take the full force of the pole-pulling, and the flexibility not to crack under soft ground conditions. 24” x 29”.
266 underground equipment
Tents & Vents
“A” Style Ground Tent
“D” Style Ground Tent
“A” Model Tents include two screen windows with roll up flaps, three tie down cords through the hub, ground flaps, singlezippered front door, exterior roof line loops for tie-downs, carry case and three tent stakes.
“D” Model Tents include two screen windows with roll up flaps, three tie down cords through the hub, ground flaps, heavy-duty frame, wide open front, snap and D-rings with inter-connectable flaps (connect 2 tents together), ventilation hose entry sleeve interior and exterior roof line loops for tie-down, carry case and three tent stakes.
Folded PART # Size Weight Dimenions 6504A 48” x 48” 18 lbs. 6” x 46” 6506A 70” x 70” 20 lbs. 6” x 56” 6508A 94” x 94” 31 lbs. 7” x 66” 6510A 118” x 118” 34 lbs. 8” x 76” 6514A 166” x 166” 162 lbs. 10” x 124”
Folded PART # Size Weight Dimenions 6506D 70” x 70” 21 lbs. 6” x 56 6508D 94” x 94” 32 lbs. 7” x 66” 6510D 118” x 118” 36 lbs. 8” x 81” 6510C 118” x 118” 51 lbs. 8” x 88” 6512D 142” x 142” 94 lbs. 10” x 100”
1325D/1400D Vent Fan
These axial steel constructed and powder painted models are our most popular. They are available in either 120 VAC (Part # 1325D) or 12 VDC (Part # 1400D). These units weigh only 19 pounds, and provide from 922 to 1075 CFM of fresh air. A suction adapter is also available (Model 3003P) for those special applications.
PART # 1325D Power Electric - 1/3 HP, 120 VAC, 3 Amps Dimensions 14.5”L x 13”W x 14.5”H Weight 20 lbs. Free Air (Certified) 1075 cfm
1400D Electric - 1/4 HP, 12 VDC, 15 Amps 14.5”L x 13”W x 14.5”H 20 lbs. 922 cfm
1325P/1400P Vent Fan
www.linestar.ca
The 1325P 120 VAC, electric blower is constructed of a durable, weather-resistant, high-impact polyethylene plastic. The unit also comes in 12 VDC (Part # 1400P). Weighing only 15 lbs., the units provide as much as 921 CFM.
PART # 1325D Power Electric - 1/3 HP, 120 VAC, 3 Amps Dimensions 18”L x 14”W x 15”H Weight 15 lbs. Free Air (Certified) 921 cfm Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
1400D Electric - 1/4 HP, 12 VDC, 15 Amps 18”L x 14”W x 15”H 15 lbs. 814 cfm
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
267
“AirPac” Series Hose & Canister
The AirPac series is a modeled polythylene canister and hose combination, which attaches to the 1325P & 1400P ventilators. The AirPac 15 includes a 15 ft. hose. The AirPac 25 includes a 25 ft. hose.
BB140 • • • •
underground equipment
Tents & Vents
8” AC Metal Axial Blowers
Type: Axial Horse Power: 1/3 Free Air Flow Rate: 1275 CFM Current: AC
CABLE PREPARATIon 1542-2CL Speed Stripper
Easily and quickly removes PE, XLP, EPR and other types of insulation from power cables. It has an O.D. Range of 1/2” to 1-3/4”. This tool is supplied with a the wedge blade installed and a spare straight blade.
1542-2AS Speed Stripper Designed to strip insulation like the 1542-2CL but also scores the semi-con outer shield.
1562 Wedge Blade 1581 Straight Blade
1700 Semi-Con Scorer
BP1A Banana Peel
1800SS Semi-Con Scorer O.D. Range 1-3/4” to 3”
BP2A Banana Peel O.D. Range 1.25” to 1.75”
1678 Scoring Blade
34230 Repl. Blade
This tool is adjustable from 1/2” to 2” and has a set screw to lock the depth.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
An adjustable blade semi-con scoring tool with an range of .75” to 1.10”.
268 underground equipment
Cable Preparation
LPW1525/TK120XN Probe Insertion Tool
Fits all 15kV & 25kV & Elastimold 35kV elbows.The preset torque limiter takes the quesswork out of elbow probe & connector tightening.
CT-1 Chamfer Tool
Cable O.D. 1/2” - 1-3/8” (12.7 - 34.9 mm) The CT-1 Chamfering Tool cut a 45 degree bevel on the insulation of cables with an O.D. of 1/2” to 1-3/8”.
2750 Secondary Stripper
An adjustable end stripper used to strip 600V cable without the use of bushings. Cable O.D. is .31” to 1.375”.
2781 Replacement Blade
Square Cut Bushing for Concentric Strand Conductor
www.linestar.ca
Cable 60 Mil Insulation Size Max OD Part #
80 Mil Insulation Max OD Part #
#6
.315 10-32540
#4
.365 10-37540
#2
.440 10-45040
.465 10-47560
4 x 4 Plus Cable End Stripper
#1
.465 10-47540
.515 10-52560
1/O
.515 10-52540
.565 10-57560 .590 10-60075
Used for stripping 600 Volt cable. 4 Interchangeable cutting heads strip cables from # 6 AWG through 500 MCM.
2/O
.565 10-57540
.590 10-60060 .640 10-65075
3/O
.590 10-60040
.640 10-65060 .665 10-67575
4/O
.665 10-67540
.690 10-70060 .740 10-75075
36001H 4 x 4 Tool Body
.315 10-32540
95 Mil Insulation Max OD Part # .390 10-40075
250
.740 10-75060 .765 11-77575
350
.840 11-85060 .890
500
.965 11-97560 1.015 11-102575
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
11-90075
100%
Canadian Owned
269 underground equipment
cable preparation Square Cut Bushings for Compressed Strand Conductor Cable 60 Mil Insulation Size Max OD Part #
80 Mil Insulation 95 Mil Insulation Max OD Part # Max OD Part #
#6
.315 10-32540
.390 10-40075
#4
.365 10-37540
#2
.415 10-42540
.465 10-47560
#1
.465 10-47540
.515 10-52560
1/O
.490 10-50040
.540 10-55060 .590 10-60075
2/O
.540 10-55040
.590 10-60060 .615 10-62575
3/O
.590 10-60040
.640 10-65060 .665 10-67575
4/O
.665 10-67540 .690 10-70060 .740 10-75075
250
.740 10-75060 .765 11-77575
350
.840 11-85060 .890
500
.965 11-97560 1.015 11-102575
2 x 2 Plus Cable End Stripper
11-90075
36101H 2 x 2 Tool Body
2 Interchangeable cutting heads.
CB6667 Square Cut Blade
for both the 2x2 and 4x4 bushings.
Square Cut Bushings for Compacted Strand Conductor Cable 60 Mil Insulation Size Max OD Part #
80 Mil Insulation Max OD Part #
95 Mil Insulation Max OD Part #
#6
.315 10-32540
.390 10-40075
#4
.365 10-37540
#2
.415 10-42540
.465 10-47560
#1
.440 10-45040
.490 10-50060
1/O
.465 10-47560
.515 10-52560
.565 10-57575
2/O
.515 10-52540
.565 10-57560
.590 10-60075
3/O
.565 10-57540
.615 10-62560
.640 10-65075
4/O
.615 10-62540
.665 10-67560
.690 10-70075
250
.715 11-72560
.740 11-75075
350
.790 11-80060
.840 11-85075
500
.915 11-92560
.965 11-97575
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Chamfer Cut Bushings are also avaible. Contact Linestar.
270 underground equipment
cable prep kits
CPK-1 - Cable Prep Kit
• CPK-12 Steel Case • 1542-2CL Stripper with 1646X Scale Gauge • 1700SS Semi-Con Scorer
CPK-4 - Cable Prep Kit
• CPK-14 Canvas Bag • 1542-2CL Stripper with 1646X Scale Gauge • CT-1 Chamfer Tool • 1700SS Semi-Con Scorer • LPW1525/TK120X-N Combination Probe Tool • SC-11 Edge Wedge • SC-13 Roller Grip
CPK-2 - Cable Prep Kit
• CPK-12 Steel Case • 1542-2CL Stripper with 1646X Scale Gauge • 1700SS Semi-Con Scorer • SC-11 Edge Wedge • SC-13 Roller Grip
CPK-5 - Cable Prep Kit
• CPK-14 Canvas Bag • 1542-2CL Stripper with 1646X Scale Gauge • 1700SS Semi-Con Scorer • LPW1525/TK120X-N Combination Probe Tool • BIT/E180AT Bushing Insert Tool • SC-11 Edge Wedge • SC-13 Roller Grip
www.linestar.ca
CPK-7 - Cable Prep Kit
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• CPK-12 Steel Case • 1542-2AS Combination Stripper with 1646X Scale Gauge • SC-11 Edge Wedge • SC-13 Roller Grip
CPK-6 - Cable Prep Kit • • • • •
CPK-14 Canvas Bag Mark I Stripper with Tool Stop 1700SS Semi-Con Scorer SC-11 Edge Wedge SC-13 Roller Grip
CPK-8 - Cable Prep Kit
• CPK-14 Canvas Bag • Mark I Stripper with Tool Stop • 1700SS Semi-Con Scorer • LPW1525/TK120X-N Combination Probe Tool • BIT/E180AT Bushing Insert Tool • SC-11 Edge Wedge • SC-13 Roller Grip
Alberta: British Columbia: Manitoba: Ontario:
CPK-3 - Cable Prep Kit
• CPK-18 Steel Case • 1542-2CL Stripper with 1646X Scale Gauge • 1700SS Semi-Con Scorer • LPW1525/TK120X-N Combination Probe Tool
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
271
CPK-9 - Cable Prep Kit
CPK-10 - Cable Prep Kit
• CPK-18 Steel Case • 1542-2CL Stripper with 1646X Scale Gauge • 1700SS Semi-Con Scorer • LPW1525/TK120X-N Combination Probe Tool • SC-11 Edge Wedge • SC-13 Roller Grip
• CPK-18 Steel Case • 1542-2CL Stripper with 1646X Scale Gauge • 1700SS Semi-Con Scorer • LPW1525/TK120X-N Combination Probe Tool
underground equipment
cable prep kits
CPK-11 - Cable Prep Kit • CPK-18 Steel Case • 1542-2CL Stripper with 1646X Scale Gauge • 1700SS Semi-Con Scorer • LPW1525/TK120X-N Combination Probe Tool • SC-11 Edge Wedge • SC-13 Roller Grip
bushing insert/removal tools BIT/E180AH Bushing Insert Tool with Torque Limiter and Operating
The BIT/E180 Series Bushing Insert Tool(same as Elastimold 200AT and Cooper LB 1) provides preset torque for installation and removal of bushing inserts with a 5/16” internal hex socket. Available in both T-Handle (AT) and OP eye (AH) versions.
BIT/E180AT Bushing Insert Tool with Torque Limiter and T-Handle
The BIT/E180 Series Bushing Insert Tool provides preset torque for installation and removal of bushing inserts with a 5/16” internal hex socket. Available in both T-Handle (AT) and OP eye (AH) versions.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
underground equipment
272
bushing insert/removal tools BIT/TK120X-Q Bushing Insert with Tor-Key
BIT/TK120X-N Bushing Insert Tool with TorKey The BIT/TK120X-N is designed to install and remove Deadbreak Bushing Inserts. (Fits all deadbreak bushing inserts.)
(Fits all loadbreak bushing inserts) The Bushing Insert Tool is designed to provide operating personnel with an effective and reliable means of installation and removal of bushing inserts.
LRTP-12 600A LRTP Installation Tool for use with your torque wrench • 1/2” drive for use with your own torque limiter • Can be used for bushing removal
The LRTP-12 Bushing Insert Tool provides for installation and removal of 600A reducing tap plug bushings with a 5/16” internal hex socket. The LRTP-12 requires a separate torque wrench.
SC-11 - Semi-Con Edge Wedge with Finger Grip
The SC-11 Semi-Con Edge Wedge is designed for lifting the front edge of the cable semi-con layer after it has been scored. The tool is equipped with an ergonomic rubber finger grip and stainless steel blade. The tool is supplied with a plastic sheath.
SC-13 Semi-Con Roller Grip
www.linestar.ca
46037 Cable Splicer’s Kit • Cable-splicer’s knife, electrician’s scissors, and 2-pocket leather pouch. • Cuts cable, telephone wire, and strips insulation. • Dimensions: 2-1/8” x 7-1/2” (54 mm x 191 mm)
Alberta: British Columbia: Manitoba: Ontario:
The SC-13 Semi-Con Roller Grip has a broad nose with serrated jaws for maximum grip. The tool is designed to provide controlled rolling of the semicon layer that has been scored. This method of rolling helps reduce tearing of the semi-con as it is being removed.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
273 underground equipment
cable benders
SLCB-JAW Cable Bender Attachment The SLCB-JAW is available for purchase separately but requires an SL tool body for operation.
SL-CB Streamline Cable Bending Tool
Huskie Tools is pleased to introduce the SL-CB, the first of its kind in the electrical utility industry, is a battery powered cable bender. The SL-CB utilized the pull-pin design, allowing technicians to change jaws from compression, to cutting, to cable bending. The SL-CB is just one of the many ergonomic solutions, provided by Huskie Tools, to help reduce strains and sprains associated with the daily tasks of a powerline technician. The SL-CB has several different settings, so the tool can be used on either secondary or primary conductor in a variety of sizes. Featuring a low profile, the SL-CB can be used in a variety of close-quarter environments; such as underground vaults, meter bases and substation applications and wherever cable bending is required. NOTE: Contact cable manufacturer for specified cable bending radii and cable bending requirements.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Features • New Pull-Pin Design for Quick Jaw Change • Bright White, LED Lights for Working in Low Light Conditions • Audible Bypass when Predetermined Pressure is Achieved • Tested Up To 75kV • 5 Year Warranty on Tool, Battery & Charger
underground equipment
274
duct rodder introduction DCD offers one of the most comprehensive range of Duct Rodders available anywhere in the world - from the smallest 1/8” diameter Fish Tapes to the rugged 1/2” Duct Rodders. The Rod DCD rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers. The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers. The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage. The Frames Frames are also a feature of the DCD systems. The four largest sizes incorporate the new EZ-Tip™ feature; a larger footprint for stability; steel brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user. Rod Selection Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including: • The size of ducting it is to be pushed through • The distance the rod is to be pushed • The number and tightness of bends in the ducting • If the ducting is already occupied by cable When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals. Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends. The chart below is a rough guide as to rod diameter selection, but the above factors should all be taken into consideration before making the final selection.
www.linestar.ca
Tensile Typical Strength Typical Strength Minimum Typical Max. Length Threaded Strength of Glued of Screwed Bend Max. of Push Rod Dia. Connection of Rod Connection Connection Radius Duct Dia. or Pull 1/8” #12 unc 1,125 lb 140 lb - 2” 1-1/4” 150 ft 3/16” #12 unc 2,200 lb 350 lb - 4” 2” 300 ft 1/4” 5/16” unc 4,070 lb 800 lb 1,050 lb 7” 2-1/2” 400 ft 5/16” 5/16” unc 7,700 lb 850 lb 1,100 lb 10” 3” 600 ft 3/8” 3/8” unc 8,580 lb 1,150 lb 1,150 lb 12” 4” 800 ft 7/16” 3/8” unc 11,000 lb 1,750 lb 1,200 lb 16” 8” 1,200 ft 1/2” 3/8” unc 13,000 lb 1,900 lb 1,250 lb 18” 10” 1,000 ft Note! ALL Duct Rodders are custom built to order and are non-returnable except for warranty. ALL REPLACEMENT RODS will be shipped in a new cage for easy replacement onto the frame. Extreme care must be taken when handling loose fiberglass rod as it stores considerable energy and may cause severe injury. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
275
52000 Series REEL ROD – 3/16” Diameter
The Reel Rod has a sturdy, powder coated, steel tube frame and features a 16” diameter storage basket. Up to 400 ft. of rod can be stored in this basket. A light adjustable brake prevents the rod from reeling out of the basket under its own tension. The Reel Rod and the Fish Rod (series 51000) share common screw threads, allowing the use of the same accessories. The standard Reel Rods include a male rod end and a pulling eye. The deluxe version includes accessories as listed below.
underground equipment
duct rodders & accessories
Although the fiberglass rods have very high reliability, improper handling can cause the rod to break. In these instances, repair is simple and can be carried out by any user.
52000 Series TUF ROD – 1/4” Diameter
This unit is mounted in a convenient frame with carrying handle similar to, but larger than the 3/16” unit and the rod is housed in a 24” diameter storage basket. The end fittings are the same as those offered with the slightly larger 5/16” rod – all stainless steel and with the unique DCD design allowing the fittings to be attached by either screwing or gluing onto the rod core. Thread sizes for all connections are 5/16” UN C. Minimum bend radius is 7” and sizes available are from 150 ft up to 500 ft. DCD does not recommend pushing lengths over 500 ft unless in relatively small ducting 2” diameter or smaller. Standard Rodders come complete with stainless steel swivel rod end, female rod end and a pulling eye, while the deluxe version includes accessories as listed below.
Deluxe Rod Replacement Deluxe Rod 1/4” Rod Length Weight Reg. Rod Accessories 52500-150 150 ft 12 lb 52600-150 1 Splice Connector 52500-200 200 ft 13 lb 52600-200 1 Flexible Guide Head 52500-250 250 ft 14 lb 52600-250 1 Roller Guide 52500-300 300 ft 15 lb 52600-300 1 Clevis End 52500-350 350 ft 16 lb 52600-350 1 Glue 3gm 52500-400 400 ft 17 lb 52600-400 1 Rod Gripper 52500-500 500 ft 19 lb 52600-500 1 Accessory Pouch For Standard Rodder units that do not include accessories shown above, add “X” to the part number Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Electric shock or death may result if conductive rod toches exposed circuit
Deluxe Deluxe Rod Replacement Deluxe Rod 3/16” Rod Detectable Length Weight Reg. Rod Accessories 52000-150 52200-150 150 ft 8 lb 52100-150 2 Splice Connectors 52000-200 52200-200 200 ft 9 lb 52100-200 1 Flexible Guide Head 52000-250 52200-250 250 ft 10 lb 52100-250 1 Roller Guide 52000-300 52200-300 300 ft 10 lb 52100-300 1 Male Rod End 52000-350 52200-350 350 ft 12 lb 52100-350 1 Glue 3gm 52000-400 52200-400 400 ft 13 lb 52100-400 1 Rod Gripper 1 Clevis End For Standard Rodder units that do not include accessories shown 1 Accessory Pouch above, add “X” to the part number.
underground equipment
276
duct rodders & accessories 53500 Series RUF ROD – 5/16” Diameter
The 5/16” Ruf Rod is one of the most popular sizes because of its versatility in both small and medium size ducts. It is the smallest of the wheel frames, yet still well under 3 ft. in height or length so easy to store or load onto your truck. Although DCD only recommends lengths up to 600 ft., the standard cage will hold up to 800 ft. The longer lengths should only be used in smaller ducts (up to 2-1/2”dia) and when there are few bends. The standard unit includes a female rod end, a swivel rod end and a pulling eye. The deluxe version includes accessories as listed below. All accessories that attach to the rod can be glued on in the traditional manner or they can be clamped on with set screws or they can be glued and screwed for extra security.
Deluxe Deluxe Rod 5/16” Rod Detectable Length Weight 53500-200 53700-200 200 ft 32 lb 53500-250 53700-250 250 ft 34 lb 53500-300 53700-300 300 ft 36 lb 53500-350 53700-350 350 ft 38 lb 53500-400 53700-400 400 ft 40 lb 53500-500 53700-500 500 ft 44 lb 53500-600 53700-600 600 ft 48 lb 53500-700 53700-700 700 ft 52 lb 53500-800 53700-800 800 ft 56 lb 53500-900* 53700-900* 900 ft 60 lb 53500-1000* 53700-1000* 1000 ft 64 lb
Replacement Deluxe Rod Reg. Rod Accessories 53600-200 53600-250 53600-300 53600-350 1 Splice Connector 53600-400 1 Flexible Guide Head 53600-500 1 Roller Guide 53600-600 1 Clevis End 53600-700 1 Glue 3gm 53600-800 1 Rod Gripper 53600-900 1 Accessory Pouch 53600-1000
54000 Series RUF ROD – 3/8” Diameter
The 3/8” Ruf Rod features a 34” diameter storage basket which comfortably stores up to 800 ft. of fiberglass rod. The Standard Ruf Rods include a female rod end, a swivel rod end and a pulling eye. The deluxe version includes accessories as listed below.
www.linestar.ca
All accessories that attach to the rod can be glued on in the traditional manner or can be clamped on with set screws or they can be glued and clamped for extra security.
Deluxe 3/8” Rod Replacement Deluxe Rod Length Weight Reg. Rod Accessories 54000-200 200 ft 49 lb 54100-200 54000-300 300 ft 55 lb 54100-300 1 Splice Connector 54000-400 400 ft 61 lb 54100-400 1 Flexible Guide Head 54000-500 500 ft 67 lb 54100-500 1 Roller Guide 54000-600 600 ft 73 lb 54100-600 1 Clevis End 54000-700 700 ft 79 lb 54100-700 1 Glue 3gm 54000-800 800 ft 85 lb 54100-800 1 Rod Gripper 54000-900* 900 ft 91 lb 54100-900 1 Accessory Pouch 54000-1000* 1000 ft 97 lb 54100-1000
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
* These two sizes are spooled on a 7/16” (56000) frame see 56000 Specs for frame dimensions. For Standard Rodder units that do not include accessories shown above, add “X” to the part number.
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
Electric shock or death may result if conductive rod toches exposed circuit
* These two sizes are spooled on a 3/8” (54000) frame, see 54000 Specs for frame dimensions. For Standard Rodder units that do not include accessories shown above, add “X” to the part number
277
56000 SERIES RUF ROD – 7/16” Diameter
The 7/16” Ruf Rod features our largest frame with a 40” diameter storage basket which can hold up to 1500 ft of 7/16” fiberglass rod. The Standard Ruf Rods include a female rod end, a swivel rod end and a pulling eye. The deluxe version includes accessories as listed below. All accessories that attach to the rod can be glued on in the traditional manner or can be clamped on with set screws or they can be glued and clamped for extra security.
Deluxe Deluxe Rod Replacement Deluxe Rod 7/16” Rod Detectable Length Weight Reg. Rod Accessories 56000-400 56200-400 400 ft 84 lb 56100-400 56000-500 56200-500 500 ft 94 lb 56100-500 56000-600 56200-600 600 ft 104 lb 56100-600 56000-700 56200-700 700 ft 114 lb 56100-700 1 Splice Connector 56000-800 56200-800 800 ft 124 lb 56100-800 1 Flexible Guide Head 56000-900 56200-900 900 ft 134 lb 56100-900 1 Roller Guide 56000-1000 56200-1000 1000 ft 144 lb 56100-1000 1 Clevis End 56000-1100 - 1100 ft 154 lb 56100-1100 1 Glue 3gm 56000-1200 - 1200 ft 164 lb 56100-1200 1 Rod Gripper 56000-1300 - 1300 ft 174 lb 56100-1300 1 Accessory Pouch 56000-1400* - 1400 ft 184 lb 56100-1400 56000-1500* - 1500 ft 194 lb 56100-1500
underground equipment
duct rodders & accessories
For Standard Rodder units that do not include accessories shown above, add “X” to the part number.
56000 SERIES RUF ROD – 1/2” Diameter
The 1/2” Ruf Rod completes the range of DCD Duct Rodders. The storage basket is the same as the for the 7/16” rod at 40” diameter and can store up to 1000 ft of the 1/2” fiberglass rod. The Standard Ruf Rods include a female rod end, a swivel rod end and a pulling eye. The deluxe version includes accessories as listed below. All accessories that attach to the rod can be glued on in the traditional manner or can be clamped on with set screws or they can be glued and clamped for extra security.
Deluxe Rod Replacement Deluxe Rod 7/16” Rod Length Weight Reg. Rod Accessories 56500-400 400 ft 96 lb 56600-400 1 Splice Connector 56500-500 500 ft 109 lb 56600-500 1 Flexible Guide Head 56500-600 600 ft 122 lb 56600-600 1 Roller Guide 56500-700 700 ft 135 lb 56600-700 1 Clevis End 56500-800 800 ft 149 lb 56600-800 1 Glue 3gm 56500-900* 900 ft 162 lb 56600-900 1 Rod Gripper 56500-1000* 1000 ft 175 lb 56600-1000 1 Accessory Pouch * Note that these lengths require the full capacity of the frame and are difficult to re-wind into the cage without due care and attention as to the layering of the rod. For Standard Rodder units that do not include accessories shown above, add “X” to the part number. Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Electric shock or death may result if conductive rod toches exposed circuit
* Note that these lengths require the full capacity of the frame and are difficult to re-wind into the cage without due care and attention as to the layering of the rod.
underground equipment
278
duct rodders & accessories DETECTABLE DUCT RODS
DCD Detectable Duct Rodders are available in 3/16”, 5/16” and 7/16” diameter rods. They are available in the same lengths as the regular rodders and are mounted in the same frames. The purpose of the detectable rod is to be able to accurately locate existing ducting underground or to locate the position of a blockage within a duct. Each DCD detectable duct rod unit is supplied with a terminal box mounted on the frame with male and female banana terminals for external hook up. It is recommended that a Roller Guide (57150 series) be used in order to better make the connection between the end of the rod and the wall of the ducting. This is necessary in order to complete the circuit back to earth. Any transmitter can then be hooked up to the terminal box with the second lead from the transmitter going to ground (spike into earth). Once switched on, the signal will be transmitted along the duct rod and a standard locator can then be used to locate the signal source from above ground. DCD Also offers various stainless steel adapters for attaching a sonde unit to the swivel rod end. The detectable duct rodders use 22 gauge copper wire. Caution should be exercised when ordering long lengths because the signal will diminish with distance traveled.
Duct Rod Accessories
All Duct Rodders are offered in standard or deluxe packages. Separate accessory kits are available with contents listed in the table below.
www.linestar.ca
The obvious advantage of the clamping system is that repairs or product changes can be carried out easily in the field with no time delay to allow the glue to dry. Spare set screws and hexagon keys are also supplied.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
Electric shock or death may result if conductive rod toches exposed circuit
The larger 5/16”, 3/8”, 7/16” and 1/2” Rodders are supplied with stainless steel accessories and all components attaching directly to the rod are designed to be glued on in the traditional manner, or can be attached by means of four clamping set screws, or can be both glued and screwed (the accessories supplied on the product at the factory are attached by screws only - they can be glued by the customer if required).
279
Accessory Kits 57000 series Accessory Kit 57000-000 Part # 1/8” Duct Rodder Series 51000 Accessory Items Part # Series Male Rod End 57135 1 Splice Connector 57100 2 Flexible Guide Head 57110 1 Roller Guide 57150 - Clevis End 57160 - Glue 57170 1 Rod Gripper 57170 1 Accessory Pouch 57170 -
57000-001 57000-003 57000-005 57000-004 57000-006 57000-007 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 52000 52500 53500 54000 56000 56500 Accessory Items Included In Above Kits 1 - - - - 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
SPLICE CONNECTORS 57100 series
These products are used to repair a break in the rod. Having a solid section in the middle of the rod may cause problems with bending at that point and care should be taken when winding rod with a solid connector. The five larger sizes are stainless steel and can be glued or screwed on, the two smaller sizes are brass and must be glued.
FLEXIBLE GUIDE HEADS 57110 series
Part # 57100-000 57100-001 57100-003 57100-005 57100-004 57100-006 57100-007
Part # For Rod Dia. 57110-000 1/8” & 3/16” 57110-001 1/8” & 3/16” 57110-002 1/4” & 5/16” 57110-004 3/8”, 7/16” & 1/2”
For Rod Dia. 1/8” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2”
underground equipment
duct rodders accessory kit
Weight 0.01 lb 0.01 lb 0.09 lb 0.09 lb 0.14 lb 0.14 lb 0.14 lb
Head Overrall Threaded Dia. Length Connection Weight 5/16” 3-1/2” #12 unc 0.02 lb 3/8” 3-1/2” #12 unc 0.03 lb 9/16” 6” 5/16” unc 0.11 lb 3/4” 12” 3/8” unc 0.27 lb
Flexible Guides are used for leading the rod around tight bends. The two larger sizes are stainless steel, the smaller sizes are brass.
PULLING EYES 57120 series
Pulling Eyes are used for tying wire or pull tape to the end of the rod or used as a leader. They screw directly onto the rod end and are supplied with the rodder.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
Body Threaded Dia. Connection 1/4” #12 unc 3/8” #12 unc 1/2” 5/16” unc 5/8” 3/8” unc • • • •
[email protected] [email protected] [email protected] [email protected]
Weight 0.01 lb 0.02 lb 0.05 lb 0.27 lb
100%
Canadian Owned
www.linestar.ca
Part # For Rod Dia. 57120-000 1/8” & 3/16” 57120-001 3/16” 57120-002 1/4” & 5/16” 57120-004 3/8”, 7/16” & 1/2”
underground equipment
280
duct rodders & accessories
ROD ENDS 57130 / 57135 Series
Female Rod End – – 57130-003 57130-005 57130-004 57130-006 57130-007
Male Rod End 57135-000 57135-001 57135-003 57135-005 57135-004 57135-006 57135-007
For Rod Dia. 1/8” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2”
Body Threaded Dia. Connection Weight 1/4” #12 unc 0.01 lb 1/4” #12 unc 0.01 lb 1/2” 5/16” unc 0.07 lb 1/2” 5/16” unc 0.07 lb 5/8” 3/8” unc 0.13 lb 5/8” 3/8” unc 0.13 lb 5/8” 3/8” unc 0.13 lb
These are used as a means of attaching accessories to the rod. Brass male rod ends are standard on the leading end of the smaller 1/8” and 3/16” rodders which have no fitting on the back end. The larger rodders are all fitted with Female ends on the back end of the rod.
SWIVEL CONNECTORS 57140 Series
The Swivel Connector allows any attachment to the rod to rotate freely. These have bronze bearings and are supplied as standard on all 1/4” and larger rodders.
Part # 57140-003 57140-005 57140-004 57140-006 57140-007
For Rod Dia. 1/4” 5/16” 3/8” 7/16” 1/2”
Body Threaded Dia. Connection 1/2” 5/16” unc 1/2” 5/16” unc 5/8” 3/8” unc 5/8” 3/8” unc 5/8” 3/8” unc
Weight 0.10 lb 0.10 lb 0.20 lb 0.20 lb 0.20 lb
ROLLER GUIDES 57150 Series
The Roller Guide is used to push through conduit with cable already in place. The rollers prevent the rod from wedging in under the cable as they rotate on hardened shoulder bolts. The shank attaches directly to the swivel rod end to provide axial rotation.
For Rod Part # Dia. 57150-001 3/16” 57150-002 1/4 & 5/16” 57150-004 3/8”, 7/16” & 1/2”
Body Across Threaded Dia. Rollers Connection Weight 3/8” 1-1/16” #12 unc 0.05 lb 1/2” 1-3/16” 5/16” unc 0.14 lb 5/8” 1-11/16” 3/8” unc 0.34 lb
CLEVIS ENDS 57160 Series
www.linestar.ca
The Clevis allows attachment of pulling ropes etc. without the need of extra shackles.
Part # 57160-002 57160-004
Alberta: British Columbia: Manitoba: Ontario:
For Rod Dia. 1/4 & 5/16” 3/8, 7/16” & 1/2”
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
Body Threaded Dia. Connection 5/8” 5/16” unc 7/8” 3/8” unc
[email protected] [email protected] [email protected] [email protected]
Weight 0.08 lb 0.22 lb
100%
Canadian Owned
281
57131-003 SONDE CONNECTIONS 57131 / 57170 series
57170-002
Other sizes may be available upon request.
underground equipment
duct rodders acessory kit
57170-003 Part # 57131-003 57131-005 57131-004 57131-006 57131-007
For Rod Dia. 1/4” 5/16” 3/8” 7/16” 1/2”
Body Threaded Dia. Connection Type 1/2” M10 X 1.5 Female 1/2” M10 X 1.5 Female Male 5/8” M10 X 1.5 Female Rod End 5/8” M10 X 1.5 Female Connecotor 5/8” M10 X 1.5 Female
57170-002 1/4” & 5/16” 1/2” 57170-004 3/8”, 7/16”, 1/2” 5/8” 57170-003 1/4” & 5/16” 57170-005 3/8”, 7/16”, 1/2” 57170-012 1/4” & 5/16” 57170-013 3/8”, 7/16”, 1/2”
1/4” UNC Male 1/4” UNC Male
Weight 0.06 lb 0.06 lb 0.12 lb 0.13 lb 0.13 lb
Rigid Adapter
0.04 lb 0.08 lb
1/2” 1/4” UNC Male 5/8” 1/4” UNC Male Flexible 1/2” M10 X 1.5 Female Adapter 5/8” M10 X 1.5 Female
0.10 lb 0.13 lb 0.10 lb 0.14 lb
MISCELLANEOUS Part # 57170-006 57170-008
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
Description Weight Rod Gripper - For all rod sizes 0.09 lb Super Adhesive - 3gm Tube 0.01 lb
www.linestar.ca
underground equipment
282
duct installation tools
Part # 08000-125 08000-150 08000-200 08000-250 08000-300 08000-350 08000-400 08000-500 08000-600
Nominal Actual Duct Size Outside Dia. 1-1/4” 1-1/4” 1-1/2” 1-1/2” 2” 1-7/8” 2-1/2” 2-1/4” 3” 2-3/4” 3-1/2” 3-1/4” 4” 3-5/8” 5” 4-3/8” 6” 5-1/4”
Weight 0.39 lb 0.41 lb 0.39 lb 0.67 lb 0.71 lb 0.75 lb 0.79 lb 0.85 lb 0.92 lb
Part # 08100-125 08100-150 08100-200 08100-250 08100-300 08100-350 08100-400 08100-500 08100-600
Nominal Actual Duct Size Outside Dia. 1-1/4” 1-1/4” 1-1/2” 1-1/2” 2” 1-7/8” 2-1/2” 2-1/4” 3” 2-3/4” 3-1/2” 3-1/4” 4” 3-5/8” 5” 4-3/8” 6” 5-1/4”
Weight 0.69 lb 0.74 lb 0.77 lb 1.21 lb 1.25 lb 1.39 lb 1.37 lb 1.55 lb 1.82 lb
Nominal Max 3:1 Safe Part # Duct Size Disc Dia. Working Load 08400-200 2” 1.69” 4,800 lb 08400-300 3” 2.65” 4,800 lb 08400-400 4” 3.57” 4,800 lb 08400-500 5” 4.56” 4,800 lb 08400-600 6” 5.51” 4,800 lb 08400-800 8” 7.26” 4,800 lb
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Spiral Duct Brush 08000 series Flat steel bristles spiralled onto heavy duty wire spindle with a pulling eye on one end only. This product will quickly remove grit or light dirt within the duct before installing your cable.
Heavy Duty Duct Brush 08100 series
These heavy duty wire brushes are fitted with a pulling eye on each end so the brush could be pulled back and forth for those extra tough cleaning jobs.
Weight 3.53 lb 5.56 lb 10.2 lb 17.2 lb 25.9 lb 45.5 lb
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
Steel Duct Checker
Steel discs in graduated sizes make this mandrel ideal for removing obstructions in ducts with extreme bends. 7,000 lbs. load capacity. (Part #08021700 is 2,000 lbs. load capacity)
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
283
Nominal Max 3:1 Safe Part # Duct Size Disc Dia. Working Load Weight 08500-125 1-1/4” 1.19” 1,400 lb 0.42 lb 08500-150 1-1/2” 1.44” 1,400 lb 0.50 lb 08500-200 2” 1.88” 2,300 lb 0.90 lb 08500-250 2-1/2” 2.19” 2,300 lb 1.04 lb 08500-300 3” 2.81” 2,300 lb 1.46 lb 08500-350 3-1/2” 3.25” 4,800 lb 2.57 lb 08500-400 4” 3.75” 4,800 lb 3.45 lb 08500-500 5” 4.69” 4,800 lb 4.71 lb 08500-680 6” sc hed. 80 5.50” 4,800 lb 6.24 lb 08500-640 6” sc hed. 40 5.81” 4,800 lb 7.16 lb 08500-880 8” sc hed. 80 6.86” 4,800 lb 9.30 lb 08500-840 8” sc hed. 40 7.40” 4,800 lb 11.0 lb
POLY DUCT CHECKER 08500 Series Duct Checkers are designed to ensure the duct bore is clear before installing the cable or other utility.
underground equipment
duct installation tools
Check the inside diameter of the ducting before selecting the product from the chart.
MANHOLE TOOLS Corner Guides
DCD Corner Guides are designed to withstand a 10,000 lb working line load with a 3:1 safety factor. The sheaves run in high strength iron-bronze bushings. The Corner Guides also have a wide base for stability, a deep lip for hooking into the manhole and two locations for hold down bars and lightening holes added everywhere possible.
Guide Sheave Part # Only 32300-400 32900-411 32300-500 32900-511 32300-600 32900-611 32300-800 32900-811
Sheave Size W x Dia. Weight 4” x 11” 58.5 lb 5” x 11” 63.5 lb 6” x 11” 70.5 lb 8” x 11” 88.5 lb
Quadrants & Hangers DCD quadrants are designed to withstand up to 10,000 lbs. working line load with a 3:1 safety factor. This means they can be used safely at either the entry end of the installation OR the exit end. The steel side plates along with the high strength bushings on each roller are all designed with strength, safety and weight in mind. All quadrants have countersunk screws holding the rollers so there are no protrusions from the side plates and the hangers can travel the full arc of the quadrant.
Hanger only 32830-300 32800-400 32800-500 32830-600 32830-800
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Sheave Sheave Size No. of Min. Cable only W x Dia. Sheaves Radius 32900-307 3” x 7” 4 27-7/8” 32900-407 4” x 7” 4 27-7/8” 32900-507 5” x 7” 4 27-7/8” 32900-611 6” x 11” 3 28-3/4” 32900-811 8” x 11” 3 28-3/8” 403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Quadrant Quadrant c/w Hangers Only 32200-304 32210-304 32200-404 32210-404 32200-504 32210-504 32200-603 32210-603 32200-803 32210-803
underground equipment
284
manhole tools Wire Rope Guide 32400 Series
DCD Wire Rope Guides are designed to withstand over 10,000 lbs. safe working line load. The hardened rollers run on ball bearings at each end for smooth easy rotation and the rollers have a flange at each end to prevent the rope from riding off either side. The product also has an extra deep lip to hook into the manhole.
Part #
3:1 Safe Sheave Sheave Sheave Working Load Width Dia. Weight Only
32400-200 10,000 lbs.
7”
2”
28 lbs.
32900-702
Sheave Hangers
DCD offers single or double hangers to go with their series of cast aluminum sheaves. The single hangers are provided with a safety hook and the double hangers have one hook and one pin through which a rope may be fed or other items attached. The sheaves are all cast aluminum with machined faces and bores. They are then fitted with high load iron-bronze flanged bushings. All parts are designed to take 10,000 lbs. line load allowing for a 3:1 safety factor. One feature of the hangers is the ease with which they are assembled to either a sheave or a quadrant. A simple pin with a handle at one end and a locking pin at the other does the job. It should be noted that the handle at one end of the pin may be used to support the hanger in a horizontal positoin should that be necessary. The sheaves and hangers may be purchased as assemblies or individually as shown in the table.
www.linestar.ca
Sheave Sheave Sheave c/w Single Single c/w Double Double Sheave Size Hanger Hanger Hanger Hanger* only w x Dia. 32000-420 32800-400 32100-420 32810-400 32900-420 4” 32000-526 32800-500 32100-526 32810-500 32900-526 5” 32000-611 32800-600 32100-611 32810-600 32900-611 6” 32000-620F 32800-600 32100-620F 32810-600 32900-620F 6” 32000-626 32800-601 32100-626 32810-601 32900-626 6” 32000-811 32800-800 32100-811 32810-800 32900-811 8” 32000-811F 32800-800 32100-811F 32810-800 32900-811F 8” Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
x x x x x x x
20” 26” 11” 20” 26” 11” 11”
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
285 underground equipment
manhole tools duct entry guide 32500 series
The Duct Entry Guide is unique for two reasons. First, it has an extra long tube section that goes inside the duct (See dimension A below) for greater stability. Second, because of the built-in spray nozzle for the DCD TU BE-LU BE® 326 application, there is one half of a quick-disconnect coupling attached to a spray nozzle that will direct the lubricant right onto the cable as it is fed into the ducting. This is a unique feature for a unique lubricant.
3:1 Safe Working Spare Part # Duct Dia. Load A Weight Sheave 32500-125* 1-1/4” 3,000 lb 7-1/2” 7.4 lb 32900-202P 32500-150* 1-1/2” 3,000 lb 7-1/2” 7.5 lb 32900-202P 32501-125* Extension 3,000 lb n/a 5.7 lb 32900-202P Quadrant 32500-200 2” 3,000 lb 7-1/2” 5.3 lb 32900-303 32500-250 2-1/2” 3,000 lb 7-1/2” 5.7 lb 32900-303 32500-300 3” 6,000 lb 9-1/2” 14.1 lb 32900-307 32500-400 4” 6,000 lb 11-1/2” 19 lb 32900-407 32500-480 4” Sched 80 6,000 lb 11-1/2” 17 lb 32900-407 32500-500 5” 6,000 lb 13-1/2” 24 lb 32900-507 32500-600 6” 6,000 lb 15-1/2” 44 lb 32900-611
Nylon Cable Protector
Flanged, split tube to insert in duct end and protect cable from damage during installation. Also can be left in place for permanent protection.
Part # 08042301 08042300
Description 1”-2-1/2” Duct 3”-6” Duct
Flexible Cable Guides with Aluminum Adapters
Cable feeds through the the Bell Adapter and exits through the Duct Adapter which fits into the duct.
Part # Dia. Length 08935012 5” 12’ 08936009 6” 9’ 08936012 6” 12’ 08988009 8” 9’ 08988012 8” 12’
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Part # Dia. Length 08931009 2” 9’ 08931012 2” 12’ 08934009 4” 9’ 08934012 4” 12’ 08935009 5” 9’
underground equipment
286
manhole equipment MANHOLE BRACE 32700 series
The DCD Manhole Brace may look like other products on the market, but look again. There are several features which make it stand out from other similar products. 1. Pivoting Head - In many applications the top of the brace cannot jam against a round manhole, instead it may be jammed against a square cutout in the roof of the manhole vault. The DCD Manhole Brace has a pivotable upper head which allows the brace and sheave to be accurately aligned with the duct bank without the need for temporary shoring/bracing. 2. Custom Extruded Channels - The aluminum channels have been custom extruded to an engineered design. Their shape provides the maximum strength-to-weight ratio while also providing a smooth sliding action. The channels have approximately twice the strength as the standard aluminum channels used in similar products, allowing a full 10,000 lb line load to be applied at either entry or exit end of the pull. This load allows in excess of a 2:1 safety factor. 3. Fixed Angle - The brace operates at a fixed angle of 10°. There is an acme screwjack assembly to adjust the height of the brace. This same screw can be used to relieve the pressure on the brace when it is being removed. 4. Lifting Bar - The lifting bar provided allows the user to easily raise the upper extension into its correct position. This bar can be swung out of the way and stored when not in use. 5. Locking Pins - The brace uses separate locking pins for each set of channels. Using two locking pins ensures that they do not interfere with the desired placement of the sheave or quadrant. 6. Fixed Width - This fixed width brace is designed to accept quadrants or sheaves up to 8” wide. Since correct alignment to the duct entrance is now possible with the rotating head, even use of only a 4” wide sheave is no problem inside the 8” available width – the sheave will simply float between the side rails always picking up the most favorable alignment. 7. Construction – Although the side channels are extruded aluminum, the upper and lower assemblies are made out of steel. While increasing the overall weight by a few pounds, the added strength of steel is necessary in order to match the strength of the extruded side channels. The end result is a brace that can operate equally at either end of the pull and one that will match the safe working loads of all other DCD manhole products at 10,000 lbs. The base section is used in all assemblies and comes complete with 2 locking pins and 1 sheave pin. The short, medium or long extension should be ordered to suit the height range requirement.
www.linestar.ca
Locking pins and sheave pins c/w securing pins may be ordered separately.
Height Part # Description Range 32700-000 Base Section n/a Plus 32700-010 Short Extension 5’-8’ 32700-020 Medium Extension 7’-10’ 32700-030 Long Extension 9’-12’ 32700-035 Extra Long Extension 12’-15’ Spare 32700-040 Locking Pin Kit (1-1/4” long) n/a 32700-050 Sheave Pin Kit (11” Long) n/a
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
Weight 64.5 lb 54.5 lb 72.5 lb 89.0 lb 105 lb 1.0 lb 4.0 lb
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
LifeGuard™ LG5A Manhole Safety System
The LifeGuard™ Manhole Safety System brings a manhole guard, fall protection and retrieval in one unit. Our system has a man-rated* capacity of 350 lbs, with an overhead proof load of 5000lbs, and meets or exceeds OSHA and ANSI standards. Constructed of structural grade aluminum and steel, the two piece unit can be assembled in just over a minute. Rapidly becoming an industry standard for Manhole retrieval. Use with man rated hoist, SRL, 3-Way or a combination of devices. Hoist not included. General Specifications: • Man Rated Capacity: 350 lbs. (159Kg)* • Overhead Proof Load: 5000 lbs. (2268 Kg) • Meets OSHA and ANSI safety standards
287 underground equipment
rescue/retrieval & cover lifter equipment
Weight & Dimensions: • Upper Arm Assembly: 42 lbs. • Guard Assembly: 33 lbs. • Dimensions: 42” W × 42” L × 75” H LG5A System Components: • Upper Arm Assembly • Guard Assembly • Leveling Feet (set of 4) • Rubber Feet (set of 4) • Hoist bracket & mounting plate for use with • Pelsue retrieval hoist. • Pulley assembly w/auto-lock carabiner. • Flexible draw latches to anchor the guard assembly (set of 4) Materials: • Upper Arm Assembly: Structural Grade Aluminum & Steel • Guard Assembly: Structural Grade Aluminum • Winch Mount: 5052-H32 Aluminum • Hardware: Grade 5 Steel
“e-z lift” cover lifter
The E-Z Lift cover lifter is the tool of choice by Major Telcoms for removing and replacing manhole and pullbox lids. • Manufactured from solid 6061-T6 lightweight aluminum • The built in mechanical advantage allows you to remove even the most stubborn cover, while letting the lifter do the work, not your back • Has a link device that attaches to an “S” Hook which allows you to position the tool so the handle is vertical when lifting. • Has a urethane covered T-bar for extra traction on asphalt. • Optional spiked foot is available for improved traction on grass, sand, ice, snow or other loose surface
70159 Manhole Cover Lifter Weight: 11 lbs. (5 kgs)
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
Optional Spiked Foot
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
70158 Manhole Cover Lifter with Spiked Foot Weight: 12 lbs. (5.4 kgs)
overhead equipment
288
rescue/retrieval & cover lifter equipment IN-8002
Xtirpa™ 1067mm (42’’) Portable Manhole Guards System For Ppe Manhole guard systems are used when an exposed entry point needs to be guarded. This portable system has an integrated mast which is used in conjunction with a davit arm to provide fall protection, entry and retrieval capabilities. The manhole guard system facilitates access to underground chambers or any other type of confi ned spaces where an entry point should be protected. Davit arm is equipped with 5000 lb. ( 2268 kg ) anchor point.
www.linestar.ca
• Weight capacity - 420 lb. ( 191 kg ) with manhole guard system.
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
289
Protect & Improve the Safety of Overhead Connections
install in less than 5 minutes
overhead equipment
ClampStar®
With ClampStar®, failing splices are repaired with NO power interruption and splice replacement is no longer necessary. ClampStar® installs in a few minutes, with a hot-stick or gloves. No mechanical grips, come-alongs, jumper cables or cutters are needed. And, ClampStar® meets ANSI C119.4 Class AA, extra heavy duty and restores both electrical and mechanical integrity on weathered conductors. There’s no need to cut power or lines and it easily installs over the existing splice. ClampStar® also increases ampacity allowing for system up-rates and is significantly safer than traditional splice replacements. ClampStar® is available in both rigid and flexible versions to accommodate various cable diameters for both transmission and distribution applications. For the transmission segment, having flexible legs and easily installed with sticks or Bare-Hand in sizes up to the largest common conductors. Simply by flexing the legs, the same device is really installed on Dead-Ends & Suspension Clamps and an integral tether provides mechanical reinforcement for those applications.
ClampStar® is a quick, easily installed answer to pressing difficulties in dealing with failing automatic splices. The featured splice connector corrector, the CSR-0325 ClampStar® can be installed by one or two men in less than 5 minutes with no power interruption or special tools required. The installed cost of the ClampStar® is a fraction of the cost of replacing failing automatic splices.
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
overhead equipment
290
ClampStar® ClampStar Part Number
Conductor Diameter Range Conductor Range Inches
# of Average Weight Keepers lbs. Kg Per Side
mm
Overall Length Inches cm
Rigid Frame CSR-0325L-007-P*** #6 AWG – #2 AWG 0.162 – 0.325 CSR-0325-015 #6 AWG – #2 AWG 0.162 – 0.325 CSR-0609-024 #2 AWG – 266.8 kcmil 0.316 – 0.609 CSR-0642L-024*** 2/0 AWG – 266.8 kcmil 0.398 – 0.642 CSR-0642-024 2/0 AWG – 266.8 kcmil 0.398 – 0.642 CSR-0883L-024*** 3/0 AWG – 477 kcmil 0.502 – 0.883 CSR-0883-036 3/0 AWG – 477 kcmil 0.502 – 0.883 CSR-1108L-024*** 336.4 kcmil – 795 kcmil 0.684 – 1.108 CSR-1108-040 336.4 kcmil – 795 kcmil 0.684 – 1.108 CSR-1631-048 1272 kcmil – 2000 kcmil 1.345 – 1.631 CSR-1912-060 1351.5 kcmil – 2750 kcmil 1.424 – 1.912
4.11 – 8.3 4.11 – 8.3 8.0 – 15.5 10.1 – 16.3 10.1 – 16.3 12.8 – 22.4 12.8 – 22.4 17.4 – 28.1 17.4 – 28.1 34.1 – 41.5 36.0 – 48.6
1 2 2 2 3 2 3 2 4 20 20
1.75 3 7 7 10.5 13 18 15 24 36 38
.79 1.4 3.2 3.2 4 5.9 8.2 6.8 10.9 16.4 17.2
12 26.38 43 43 52.8 44.0 59.5 44 78.8 100 112
30.5 67.0 109.2 109.2 134.1 111.8 151.1 111.8 200.1 254.0 284.5
3 3 4 5
13 22 28 39
5.9 10.0 12.7 17.7
65 65.5 79 99
165.1 166.4 200.7 251.5
2 3 3 4 5 20 20
9 12 20 28 40 35 39
4.1 5.4 9.1 12.7 18.2 15.9 17.7
55.6 65 69.5 87 111 120 112
141.2 165.1 176.5 221 282 304.8 284.5
3 3 3 3 3 3
14.5 12.5 12.7 14.7 15.1 12.9
6.6 6.8 5.8 6.7 6.8 5.9
47.4 47.4 46.8 47.4 47.4 46.8
120.4 120.4 118.9 120.4 120.4 118.9
3 3 4 5 16 16
3 10.5 12 20 13.3 13.6
1.4 4.8 5.4 9 6.0 6.2
14.4 19.4 19.4 25.4 26.0 26.0
36.5 49.3 49.3 64.5 66.0 66.0
Flexible Frame CSF-0642-036 CSF-0883-036 CSF-1108-040 CSF-1302-048
2/0 AWG – 266.8 kcmil 0.398 – 0.642 3/0 AWG – 477 kcmil 0.502 – 0.883 336.4 kcmil – 795 kcmil 0.684 – 1.108 715.5 kcmil – 1272 kcmil 1.036 – 1.345
10.1 – 16.3 12.8 – 22.4 17.4 – 28.1 26.3 – 34.2
Single Rail * CSS-0642L-036*** 2/0 AWG – 266.8 kcmil 0.398 – 0.642 CSS-0642-036 2/0 AWG – 266.8 kcmil 0.398 – 0.642 CSS-0883-040 3/0 AWG – 477 kcmil 0.502 – 0.883 CSS-1108-048 336.4 kcmil – 795 kcmil 0.684 – 1.108 CSS-1302-060 715.5 kcmil – 1272 kcmil 1.036 – 1.345 CSS-1631-066 1272 kcmil – 2000 kcmil 1.345 – 1.631 CSS-1912-060 1351.5 kcmil – 2750 kcmil 1.424 – 1.912
10.1 – 16.3 10.1 – 16.3 12.8 – 22.4 17.4 – 28.1 26.3 – 34.2 34.1 – 41.5 36.0 – 48.6
OHSW OHSW-0656-INS-039 OHSW-0656-NIN-039 OHSWR-0656-018 OPGW-0656-INS-039 OPGW-0656-NIN-039 OPGWR-0656-018
0.349 – 0.642 0.349 – 0.642 0.349 – 0.642 0.349 – 0.642 0.349 – 0.642 0.349 – 0.642
8.9 – 16.3 8.9 – 16.3 8.9 – 16.3 8.9 – 16.3 8.9 – 16.3 8.9 – 16.3
CRU CRU-0642-014 CRU-0883-015 CRU-1108-019 CRU-1302-025 CRU-1631-026 CRU-1912-026
2/0 AWG – 266.8 kcmil 0.398 – 0.642 3/0 AWG – 477 kcmil 0.502 – 0.883 336.4 kcmil – 795 kcmil 0.684 – 1.108 715.5 kcmil – 1272 kcmil 1.036 – 1.345 1272 kcmil – 2000 kcmil 1.345 – 1.631 1351.5 kcmil – 2750 kcmil 1.424 – 1.912
10.1 – 16.3 12.8 – 22.4 17.4 – 28.1 26.3 – 34.2 34.1 – 41.5 36.0 – 48.6
www.linestar.ca
Corona Shields CSC-0883-230 CSC-1108-345 ** CSC-1302-345 ** CSC-0883-345 CSC-XXXX-500
Corona shields are generally required for applications above 138 kv. The appropriate shielding is obtained by combining the ClampStar unit number with the highest anticipated system voltage. Example: CSC-1108-230 designates shielding for corona free performance of CSF/CSR-1108 units installed on a 230 kv system. **Same shield is used for 230 and 345 KV applications Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
TOOL REPAIR & ASSEMBLY LineStar has full service repair facilities in all locations across Canada. LineStar is the only authorized Huskie Tools service and repair facilities in Western Canada. We offer repair and testing programs for Grounds to meet individual custom requirements. LineStar also manufactures and test Custom Jumpers and Ground Sets to your specified lengths and sizes.
Huskie Tools - Battery Operated Compression Tools - Battery Operated Cutters - Hydraulic Compression Tools - Hydraulic Cutting Tools We also repair: - Ratcheting and Hand Operated Cable Cutters - Streamlight Rechargeable Lights - Speed Systems Cable Prep Tools - Hydraulic Impact Wrenches - Hydraulic Compression Tools
LineStar also provices Chain & Strap Hoist Repair and Testing on our State or the Art Custom Test Rack. We provide a test report for each and every hoist tested. New or used.
100%
Canadian Owned
www.linestar.ca
cable chart
292
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
60/100 Ton Presses.................................. 204-205 A
B Ball Studs .................................................. 84, 142 Battery & Hydraulic Powered Tools .............. 159-183 Battery Powered Impact Wrenches .................. 15-17 Battery Test Gauge ................................... 178, 195 Batteries & Chargers ........................................ 183 Boards & Hooks ................................................. 31 Body Belts.................................................... 37-41 Bolt Cutters .............................................. 154-155 Boom Mounted Hot Stick Holder .......................... 30 Boom Mounted Pruner Saw Holder ...................... 30 Boot Out Arms .......................................... 232-233 Bot Testers ...................................................... 236 Break Away Belt Hook......................................... 44 Breaker Attachments.......................................... 24 Brush Blade....................................................... 13 Bucket Covers .................................................... 34 Bucket Hooks .................................................... 31 Bucket Rescue Systems ..................................... 35 Buckingham Body Belts ................................. 37-41 Buckingham Body Belt Accessories ..................... 42 Bug Wrenches ...................................................... 6 Bushing Insert & Removal Tools ................. 270-271 C
Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
D DC Voltage Detectors ...................................... 238 Digging Bars, Spades & Spoons ........................ 260 Digital Phasing Testers .............................. 243-244 Digital Voltage Testers ............................... 237-238 Dirt Slings ....................................................... 261 Dog Bone Wrenches ............................................. 6 Drills and Auger Bits ........................................... 20 Duct Installation Tools ............................... 281-285 Duct Rodders ............................................ 273-280 Dynamometers ................................................. 134 E Elbow Pulling Tools ........................................... 224 Elbow & Transformer Ground Sets ..................... 145 Equipotential Grounding Mats ..................... 85, 148 Extension Arms ......................................... 232-233 F Ferrules .................................................... 143-144 Fiberglass Extension Arms ......................... 232-233 Fiberglass Hotline Tools ............................. 218-233 Fiberglass Hook Ladders .................................. 231 Fiberglas Rulers ................................................. 12 Fiberglass Shotgun Sticks .......................... 218,221 Fiberglass Tool Boards ........................................ 31 Fiberglass Tool Trays ........................................... 32 G Gaff Guards........................................................ 51 Glove Covers.................................................. 66-67 Goat Wrench ........................................................ 5 GoLights............................................................ 78 Grip All Sticks .................................................. 221 Ground Cables ................................................. 144 Ground Protection Mats ................................. 82-83 Ground Resistance Testers ............................... 149 Ground Rod Drivers .......................................... 149 Grounded Blocks & Accessories ........................ 129 Grounding Accessories ..................................... 149 Grounding Clamps ..................................... 141-142 Grounding Elbows ............................................. 145 Grounding Equipment ................................ 141-149 Grounding Ferrules .................................... 143-144 Grounding Mats ......................................... 85, 148 Grounding Pole Bands ...................................... 148
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Cable Feeding & Hooked Hanger Sheaves ... 282-284 Cable Guides ............................................ 282-284 Cable Prep Kits ......................................... 269-270 Cable Slicers ............................................ 155-156 Cable Splicers Kit ............................................... 13 Cable Strippers......................................... 266-267 Camo Tamp Bag............................................ 26-27 Canvas Pouches & Tool Holsters .................... 43-44 Canvas Tool Bags ............................................... 26 Canvas Tool Buckets ..................................... 25-27 Capstan Hoists ......................................... 101-104 Chain Hoists ................................................. 95-98 Chamfering Tools ............................................. 267 Clamp On Meters ...................................... 245-246 ClampStar Connector Corrector.................. 288-289
293
INDEX
ACSR Trimmer & Bushings.......................... 152-153 Adjustable Rope Slings........................................ 92 Adjustable Wrenches............................................ 5 Aerial Bucket Items........................................ 29-37 Alturnamats.................................................. 82-83 Amcorders........................................................ 235 Ampact Tools............................................. 216-217 Ampact Bags...................................................... 28 AmpStiks ......................................................... 234 Anchoring & Pole Setting ............................ 256-264 Anchor Drive Tools ..................................... 256-257 Arc Blankets & Substation Barriers ...................... 76 Arc/FR Rain Gear .......................................... 62-64 Arc/FR Traffic Safety Clothing ......................... 58-60 Auger Bits .......................................................... 20 Axial Blowers ............................................ 265-266
Climbing Boots.............................................. 55-57 Climbers............................................. 47-50, 52-53 Clipping Hook .................................................. 133 Compression Dies ..................................... 206-210 Compression Tools .................................... 186-205 Conductor Cleaning Brushes ...................... 150-151 Conductor Stringing System .............................. 130 Cover Up ...................................................... 72-76 Crescent Wrenches.............................................. 5 Crossarm & Pole ........................................... 73-74 CSA Dies .................................................. 206-209
INDEX
294
Gut Straps & Suspenders .................................. 42 Guy Wire Dispensers.......................................... 81 H Hammers .......................................................... 13 Handline Blocks & Sets ................................. 90-91 Handline Hook ................................................... 91 Hand Tools ..................................................... 5-14 Hard Hats .......................................................... 79 Hard Hat Lights.................................................. 80 Hard Hat Sweat Bands....................................... 79 Harnesses .................................................... 36-37 Heavy Duty Gear Bags ................................... 26-27 Hex Key ( Allen) Wrenches .................................... 6 Hoists ........................................................ 95-104 Hook & Sectional Ladders ................................. 231 Hot Arms & Conductor Supports ................. 232-233 Hot stick Wipes................................................. 230 Hot Stick Cleaning Products............................... 230 Hotline Accessories ................................... 226-230 Hotline Cutters .......................................... 184-185 Hot Pole Tongs ................................................. 249 Hot Stick Cleaning & Maintenance ..................... 230 Hydraulic & Battery Powered Cutters ........... 159-182 Hydraulic Breakers.............................................. 24 Hydraulic Compression Tools ...................... 201-205 Hydraulic Couplers & Hoses .............................. 219 Hydraulic Impact Wrenches ................................. 15 Hydraulic Intensifiers .......................................... 19 Hydraulic Pole Pullers ....................................... 264 Hydraulic Pumps & Hoses .......................... 211-214 Hydraulic Pruners & Chain Saws ..................... 22-23 Hydraulic Tampers ............................................ 263 Hydraulic Tools .............................................. 21-24 I Ice Buster ........................................................ 225 Impact Sockets & Adapters ............................ 18-20 Impact Wrenches............................................... 15 Impact Wrench Bucket Holders ............................ 32 Instant Insulation............................................... 76 Insulated Parking Stand .................................... 149 Insulated Platforms .......................................... 231 Insulated Ratchet Wrenches ................................. 9 J Jack Jumpers ................................................... 138 Jumper Cable & Assemblies .............................. 137 K Kelly Bar Adapters ............................................ 256 Klondike Clamp.................................................. 70 Knives .......................................................... 13-14
www.linestar.ca
L Lanyards ............................................................ 38 Laser Range Finders........................................... 85 Leather Work Gloves ...................................... 58-60 Leatherman Multi Tools ...................................... 11 Alberta: British Columbia: Manitoba: Ontario:
phone: phone: phone: phone:
Lifting & Rigging .......................................... 86-104 Lifting & Rigging Blocks ............................86, 89-92 Lights ........................................................... 79-80 Line Hose & Covers ............................................ 71 Line Hose Bags .................................................. 29 Lineman’s Climbing Boots ............................. 55-57 Linemans Pliers ................................................. 10 Link Sticks ......................................................... 99 Loadbreak & Load Pickup Tools .................. 138-140 Locking Dog Assembly ...................................... 256 Lowell Linemans Wrenches ................................ 6-7 M Manhole Cover Lifters ....................................... 286 Manhole Rescue Equipment ....................... 286-287 Manual Compression Tools ............................... 186 Measuring Equipment ......................................... 85 Measuring Tapes ................................................ 12 Measuring Sticks ............................................. 220 Meters & Testers ...................................... 234-251 N Nose Bags .................................................... 27-29 Nut & Bolt Bags ................................................. 43 Nut Drivers ........................................................ 12 Nylon Slings ....................................................... 93 O Ohmstiks ......................................................... 234 Outrigger Pads ................................................... 84 Oval Tool Buckets .......................................... 28-28 Ox Block ....................................................... 89-90 P Peaveys ........................................................... 259 Penta Wrench ...................................................... 9 Personal Protection ....................................... 55-64 Phase Sequence Indicators ............................... 245 Pipe & Cable Locators ...................................... 244 Plastic Conductor & Cutout Covers ................. 72-75 Pliers ................................................................ 10 Pocketbook Grips ............................................. 112 Pocket Knives.................................................... 14 Pole Boss System ............................................ 130 Pole Cradle ...................................................... 259 Pole Climbers & Pads .................................... 47-54 Pole Dollies ..................................................... 262 Pole Lifting Tongs ............................................. 258 Pole Slings ...................................................... 258 Pole Straps ................................................... 45-46 Pole Tampers ........................................... 260, 263 Probe Insert Tools ............................................ 267 Pullers & Tensioners .................................. 135-136 Pulling Eyes ....................................................... 96 Pulling Socks ............................................ 114-117 Punch Lok Clamps ............................................ 119 Punch Lok Tools ............................................... 119
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
Q Qualstiks ......................................................... 235
Ratchet Cutters ......................................... 156-158 Ratchet Wrenches ................................................ 9 Reel Lifters ........................................................ 81 Reel Thing......................................................... 81 Robo Bender .................................................... 190 Ropes ...................................................... 120-122 Rope Belts .................................................... 45-46 Rope Splicing Tools............................................ 87 Round Slings..................................................... 93 Rubber Blankets & Accessories ...................... 69-70 Rubber Gloves ................................................... 65 Rubber Glove Protectors & Bags ..................... 66-67 Rubber Goods Cleaner........................................ 70 Rubber Sleeves & Accessories ............................ 68 Rulers ............................................................... 12 S Safety Glasses ................................................... 80 Safety Grounding Pole Bands ............................ 148 Sagging Equipment ........................................... 133 Sag Scope & Thermometer ............................... 133 Sagwatch ......................................................... 133 Screwdrivers ...................................................... 11 Screw Ground Rods .......................................... 147 Semi-Con Scorers ............................................. 266 Sensorlink Troubleman’s Kit .............................. 235 Servisavors ...................................................... 250 Shotgun Sticks ......................................... 218, 221 Skinning Knives................................................. 13 Slack Blocks ...................................................... 92 Sockets & Socket Sets ......................................... 8 Specialty Tool Buckets & Bags ....................... 28-29 Speed Strippers ............................................... 266 Strap Hoists ............................................... 98-100 Stringing Blocks ........................................ 124-129 SupaRule........................................................... 85 Super Squeeze .................................................. 45 Swivels & Connectors ................................ 117-118 T Take Up & Payout Reels ...................................... 81 Tape Measures .................................................. 12 Telescoping Sticks ..............................219, 220-222
295
INDEX
R
Temporary Cutouts ........................................... 140 Tents and Blowers ..................................... 265-266 Thumpers ........................................................ 251 Tie Sticks ........................................................ 233 Tool Aprons ........................................................ 30 Tool Pouches ..................................................... 44 Torque Monitors............................................... 257 Torque Wrenches.................................................. 9 Traffic Control & Work Zone Safety .................. 77-79 Tramp Bags .................................................. 26-27 Transformer Dollies ............................................ 94 Transformer Gins .............................................. 233 Transformer Slings ............................................. 94 Transformer Testers ................................... 247-248 Traveling Grounds & Accessories ................ 131-132 Tree Trimmers .................................................. 225 Triple Square Wrenches ..................................... 6-7 Truck Accessories ......................................... 81-85 Truck Grounding ............................................ 84-85 Truck Grounds & Reels .................................. 84-85 U Underground Equipment .....................252, 265-287 Undergrounds Utility Locators ..................... 252-255 Universal 7” Blocks & Brackets .................. 124-125 Universal Attachments ............................... 225-229 Universal & Disconnect Sticks ........................... 223 URD Pipe & Cable Locators ............................... 244 V Varcorders ....................................................... 235 Voltage & Phasing Testers .......................... 237-247 W Wedge Grips .................................................... 112 Wiggy.............................................................. 245 Winch Lines....................................................... 88 Wire Cutting Tools ..................................... 152-182 Wire Holding Sticks .......................................... 224 Wire Mesh Pulling Socks ............................ 114-117 Wire Pulling Grips ...................................... 105-113 Wire Strippers ........................................... 266-270 Whoopie Slings................................................... 94 Wood Pole Auger Bits ......................................... 20 Wood Pole Fall Protection System ................... 45-46 Work Gloves .................................................. 58-60 Wrenches ............................................................ 5
Notes:
phone: phone: phone: phone:
403-243-1900 604-594-2701 204-783-9771 905-564-5344
• • • •
[email protected] [email protected] [email protected] [email protected]
100%
Canadian Owned
www.linestar.ca
Alberta: British Columbia: Manitoba: Ontario:
www.linestar.ca
British Columbia:
p: 604-594-2701 f: 604-594-2751 Toll Free: 1-866-594-2701
Manitoba:
p: 204-783-9771 f: 204-783-8951 Toll Free: 1-855-766-8021
Alberta:
p: 403-243-1900 f: 403-243-2063 Toll Free: 1-877-248-6657
Ontario:
p: 905-564-5344 f: 905-564-5354 Toll Free: 1-844-564-5344