Transmission Line Ampacity In Southern Hemisphere: Etap Knowledge Base

ETAP Knowledge Base

Transmission Line Ampacity in Southern Hemisphere Description: How to input data to obtain the transmission line ampacity for a location in the Southern hemisphere Category:

Transmission Line Ampacity Calculation

Type:

Information

Keywords:

Transmission Line Ampacity, IEEE Std. 738-1993, North Latitude

The North Latitude field for the transmission line ampacity calculation restricts the value to between 0 and 90 degrees. Negative values are not allowed. Accordingly, to obtain the ampacity for locations in the Southern hemisphere enter the south latitude in place of the north latitude and enter the Azimuth as measured counterclockwise from the South direction.

This document is confidential and proprietary to Operation Technology, Inc. and may not be reproduced, published or disclosed to others without the written authorization of Operation Technology, Inc., 17 Goodyear, Suite 100, Irvine, CA 92618, USA. © 2011 by Operation Technology, Inc. All Rights Reserved.

© Operation Technology, Inc.

Page 1 of 1

ETAPKB