009-3297-010_(39xx_51xx_saos_6.18_commandreference)revisiona

  • Uploaded by: Bayu Fitrianto
  • 0
  • 0
  • March 2021
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View 009-3297-010_(39xx_51xx_saos_6.18_commandreference)revisiona as PDF for free.

More details

  • Words: 123,231
  • Pages: 648
Loading documents preview...
39XX/51XX Service Delivery, Aggregation and Virtualization Switches

Command Reference SAOS 6.18

What’s inside... New in this release CLI fundamentals Commands

009-3297-010 - Standard Revision A January 2019 Copyright© 2019 Ciena® Corporation. All rights reserved.

LEGAL NOTICES THIS DOCUMENT CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION OF CIENA CORPORATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE OR DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE, OR SELL ANYTHING THAT IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE, OR USE IN WHOLE OR IN PART WITHOUT THE SPECIFIC WRITTEN AUTHORIZATION OF CIENA CORPORATION IS STRICTLY FORBIDDEN. EVERY EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION IN THIS DOCUMENT IS COMPLETE AND ACCURATE AT THE TIME OF PUBLISHING; HOWEVER, THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE. While the information in this document is believed to be accurate and reliable, except as otherwise expressly agreed to in writing CIENA PROVIDES THIS DOCUMENT “AS IS” WITHOUT WARRANTY OR CONDITION OF ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are subject to change without notice. For the most up-to-date technical publications, visit www.ciena.com. Copyright© 2019 Ciena® Corporation. All Rights Reserved The material contained in this document is also protected by copyright laws of the United States of America and other countries. It may not be reproduced or distributed in any form by any means, altered in any fashion, or stored in a data base or retrieval system, without express written permission of the Ciena Corporation. Security Ciena® cannot be responsible for unauthorized use of equipment and will not make allowance or credit for unauthorized use or access. Contacting Ciena

Corporate Headquarters

410-694-5700 or 800-921-1144

www.ciena.com

Customer Technical Support/Warranty In North America

1-800-CIENA-24 (243-6224) 410-865-4961

In Europe, Middle East, and Africa

800-CIENA-24-7 (800-2436-2247) +44-207-012-5508 00 0800 77 454 (Slovenia)

In Asia-Pacific

800-CIENA-24-7 (800-2436-2247) +81-3-6367-3989 +91-124-4340-600 120 11104 (Vietnam) 000 8004401369 (India)

In Caribbean and Latin America

800-CIENA-24-7 (800-2436-2247) 1230-020-0845 (Chile) 009 800-2436-2247 (Colombia) 0800-77-454 (Mexico and Peru) 00 008000442510 (Panama)

Sales and General Information

North America: 1-800-207-3714 International: +44 20 7012 5555

E-mail: [email protected]

In North America

410-694-5700 or 800-207-3714

E-mail: [email protected]

In Europe

+44-207-012-5500 (UK)

E-mail: [email protected]

In Asia

+81-3-3248-4680 (Japan)

E-mail: [email protected]

In India

+91-22-42419600

E-mail: [email protected]

In Latin America

011-5255-1719-0220 (Mexico City)

E-mail: [email protected]

Training

E-mail: [email protected]

For additional office locations and phone numbers, please visit the Ciena web site at www.ciena.com.

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

READ THIS LICENSE AGREEMENT (“LICENSE”) CAREFULLY BEFORE INSTALLING OR USING CIENA SOFTWARE OR DOCUMENTATION. THIS LICENSE IS AN AGREEMENT BETWEEN YOU AND CIENA COMMUNICATIONS, INC. (OR, AS APPLICABLE, SUCH OTHER CIENA CORPORATION AFFILIATE LICENSOR) (“CIENA”) GOVERNING YOUR RIGHTS TO USE THE SOFTWARE. BY INSTALLING OR USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS LICENSE AND AGREE TO BE BOUND BY IT. 1. License Grant. Ciena may provide “Software” to you either (1) embedded within or running on a hardware product or (2) as a standalone application, and Software includes upgrades acquired by you from Ciena or a Ciena authorized reseller. Subject to these terms, and payment of all applicable License fees including any usage-based fees, Ciena grants you, as end user, a non-exclusive, non-transferable, personal License to use the Software only in object code form and only for its intended use as evidenced by the applicable product documentation. Unless the context does not permit, Software also includes associated documentation. 2. Open Source and Third Party Licenses. Software excludes any open source or third-party programs supplied by Ciena under a separate license, and you agree to be bound by the terms of any such license. If a separate license is not provided, any open source and third party programs are considered “Software” and their use governed by the terms of this License. 3. Title. You are granted no title or ownership rights in or to the Software. Unless specifically authorized by Ciena in writing, you are not authorized to create any derivative works based upon the Software. Title to the Software, including any copies or derivative works based thereon, and to all copyrights, patents, trade secrets and other intellectual property rights in or to the Software, are and shall remain the property of Ciena and/or its licensors. Ciena's licensors are third party beneficiaries of this License. Ciena reserves to itself and its licensors all rights in the Software not expressly granted to you. 4. Confidentiality. The Software contains trade secrets of Ciena. Such trade secrets include, without limitation, the design, structure and logic of individual Software programs, their interactions with other portions of the Software, internal and external interfaces, and the programming techniques employed. The Software and related technical and commercial information, and other information received in connection with the purchase and use of the Software that a reasonable person would recognize as being confidential, are all confidential information of Ciena (“Confidential Information”). 5. Obligations. You shall: i) Hold the Software and Confidential Information in strict confidence for the benefit of Ciena using your best efforts to protect the Software and Confidential Information from unauthorized disclosure or use, and treat the Software and Confidential Information with the same degree of care as you do your own similar information, but no less than reasonable care; ii) Keep a current record of the location of each copy of the Software you make; iii) Use the Software only in accordance with the authorized usage level; iv) Preserve intact any copyright, trademark, logo, legend or other notice of ownership on any original or copies of the Software, and affix to each copy of the Software you make, in the same form and location, a reproduction of the copyright notices, trademarks, and all other proprietary legends and/or logos appearing on the original copy of the Software delivered to you; and v) Issue instructions to your authorized personnel to whom Software is disclosed, advising them of the confidential nature of the Software and provide them with a summary of the requirements of this License. 6. Restrictions. You shall not: i) Use the Software or Confidential Information a) for any purpose other than your own internal business purposes; and b) other than as expressly permitted by this License; ii) Allow anyone other than your authorized personnel who need to use the Software in connection with your rights or obligations under this License to have access to the Software; iii) Make any copies of the Software except such limited number of copies, in machine readable form only, as may be reasonably necessary for execution in accordance with the authorized usage level or for archival purposes only; iv) Make any modifications, enhancements, adaptations, derivative works, or translations to or of the Software; v) Reverse engineer, disassemble, reverse translate, decompile, or in any other manner decode the Software; vi) Make full or partial copies of the associated documentation or other printed or machine-readable matter provided with the Software unless it was supplied by Ciena in a form intended for reproduction; vii) Export or re-export the Software from the country in which it was received from Ciena or its authorized reseller unless authorized by Ciena in writing; or

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

viii) Publish the results of any benchmark tests run on the Software. 7. Audit: Upon Ciena's reasonable request you shall permit Ciena to audit the use of the Software to ensure compliance with this License. 8. U.S. Government Use. The Software is provided to the Government only with restricted rights and limited rights. Use, duplication, or disclosure by the Government is subject to restrictions set forth in FAR Sections 52-227-14 and 52-227-19 or DFARS Section 52.227-7013(C)(1)(ii), as applicable. The Software and any accompanying technical data (collectively “Materials”) are commercial within the meaning of applicable Federal acquisition regulations. The Materials were developed fully at private expense. U.S. Government use of the Materials is restricted by this License, and all other U.S. Government use is prohibited. In accordance with FAR 12.212 and DFAR Supplement 227.7202, the Software is commercial computer software and the use of the Software is further restricted by this License. 9. Term of License. This License is effective until the applicable subscription period expires or the License is terminated. You may terminate this License by giving written notice to Ciena. This License will terminate immediately if (i) you breach any term or condition of this License or (ii) you become insolvent, cease to carry on business in the ordinary course, have a receiver appointed, enter into liquidation or bankruptcy, or any analogous process in your home country. Termination shall be without prejudice to any other rights or remedies Ciena may have. Upon any termination of this License you shall destroy and erase all copies of the Software in your possession or control, and forward written certification to Ciena that all such copies of Software have been destroyed or erased. Your obligations to hold the Confidential Information in confidence, as provided in this License, shall survive the termination of this License. 10. Compliance with laws. You agree to comply with all laws related to your installation and use of the Software. Software is subject to U.S. export control laws, and may be subject to export or import regulations in other countries. If Ciena authorizes you to import or export the Software in writing, you shall obtain all necessary licenses or permits and comply with all applicable laws. 11. Limitation of Liability. ANY LIABILITY OF CIENA SHALL BE LIMITED IN THE AGGREGATE TO THE AMOUNTS PAID BY YOU TO CIENA OR ITS AUTHORIZED RESELLER FOR THE SOFTWARE. THIS LIMITATION APPLIES TO ALL CAUSES OF ACTION, INCLUDING WITHOUT LIMITATION BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION AND OTHER TORTS. THE LIMITATIONS OF LIABILITY DESCRIBED IN THIS SECTION ALSO APPLY TO ANY LICENSOR OF CIENA. NEITHER CIENA NOR ANY OF ITS LICENSORS SHALL BE LIABLE FOR ANY INJURY, LOSS OR DAMAGE, WHETHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL INCLUDING WITHOUT LIMITATION ANY LOST PROFITS, CONTRACTS, DATA OR PROGRAMS, AND THE COST OF RECOVERING SUCH DATA OR PROGRAMS, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES IN ADVANCE. 12. General. Ciena may assign this License to an affiliate or to a purchaser of the intellectual property rights in the Software. You shall not assign or transfer this License or any rights hereunder, and any attempt to do so will be void. This License shall be governed by the laws of the State of New York without regard to conflict of laws provisions. The U.N. Convention on Contracts for the International Sale of Goods shall not apply hereto. This License constitutes the complete and exclusive agreement between the parties relating to the license for the Software and supersedes all proposals, communications, purchase orders, and prior agreements, verbal or written, between the parties. If any portion hereof is found to be void or unenforceable, the remaining provisions shall remain in full force and effect.

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

v

Publication history

0

January 2019 Standard Revision A First standard release of this document for SAOS 6.18

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

vi Publication history

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

vii

Contents About this document New in this release

0

xi 1-1

New 1-1 Updated 1-1

CLI fundamentals

2-1

Navigating the CLI 2-2 Command schema 2-2 Sub-menus 2-3 Command completion 2-3 Getting help 2-4 Command response 2-4 Understanding command syntax 2-5 Specifying multiple objects with lists and ranges 2-6 Specifying IP addresses 2-6 Entering names 2-7 Specifying common objects and attributes 2-7 Hidden and deprecated commands 2-8

Commands

3-1

access-list 3-1 aggregation 3-6 ais 3-10 alarm 3-12 arp 3-16 as-path 3-18 attachment-circuit 3-19 benchmark 3-22 bfd 3-37 bgp 3-41 blade 3-62 broadcast-containment 3-62 capture 3-64 cfm 3-68 chassis 3-108 clear 3-112

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

viii Contents cli 3-112 command-log 3-113 community-list-expanded 3-116 community-list-standard 3-117 configuration 3-118 device-archive 3-123 dhcp 3-123 dhcpv6 3-133 dns-client 3-140 dot1x 3-142 egress-port-restriction 3-147 eoam 3-148 extcommunity-list-expanded 3-151 extcommunity-list-standard 3-152 file 3-153 flow 3-156 gmpls 3-167 icl 3-194 interface 3-196 ip 3-205 isis 3-208 l2-cft 3-216 ldp 3-222 linear-protection 3-226 lldp 3-228 log 3-232 module 3-253 mpls 3-254 mstp 3-301 multicast-services 3-306 ndp 3-315 netconf 3-317 ntp 318 ospf 3-322 patch 3-327 pm 3-329 port 3-344 prefix-list 3-370 private-forwarding-groups 3-371 radius 3-376 radsec 3-386 resource-manager 3-394 ring-protection 3-395 rmon 3-399 route-map 3-407 rstp 3-411 rsvp-te 3-414 snmp 3-417 software 3-442 ssh 3-447 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Contents ix sub-port 3-467 sync 3-468 syslog 3-488 system 3-499 tacacs 3-516 telnet 3-524 traffic-profiling 3-525 traffic-services 3-544 tunnel 3-564 twamp 3-568 usb-flash 3-573 user 3-574 virtual-circuit 3-579 virtual-link-loss-indication 3-588 virtual-switch 3-591 vlan 3-599 vpls-irb 3-603

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

x Contents

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

xi

About this document

0

This document describes the operating system commands and syntax for this release of the Service Aware Operating System (SAOS). These commands support the 39XX/51XX Service Delivery, Aggregation and Virtualization Switches in this release.

Trademark acknowledgments •

Ciena® is a registered trademark of Ciena Corporation.



Cisco® is a registered trademark of Cisco.



Juniper Networks, the Juniper Networks logo, JUNOS, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. JUNOSe is a trademark of Juniper Networks, Inc.



UNIX® is a registered trademark licensed exclusively through X/Open Company, Ltd.

Intended audience This document is intended for certified system installation technicians, test engineers, network operations center, and technical support personnel responsible for configuration. All personnel are required to read, understand, and observe the safety precautions described in the appropriate product manuals.

Release notes and document updates This document is revised at major releases and, therefore, may not always contain the latest product information. As needed, customer Release Notes (RNs) are provided for all releases to describe any new information or document changes. The latest online version of this document and all release notes can be accessed on the Ciena web site at http://www.ciena.com.

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

xii About this document

Related documentation Refer to the 39XX/51XX Service Delivery, Aggregation and Virtualization Switches SAOS 6.18 Product Fundamentals in the “Documentation Roadmap” chapter for a list of related documents.

Document ordering information To order additional documentation, the user can contact the local sales representative or Ciena through the contact numbers and/or e-mail addresses listed after the front cover.

Document comments Ciena appreciates all comments that help us to improve our documentation quality. The user can submit comments through the Ciena web site at http:// www.ciena.com.

Additional product information Additional product information can be obtained by contacting the local sales representative or Ciena through the contact numbers and/or e-mail addresses listed after the front cover.

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

1-1

New in this release

1-

The following summarizes documentation changes in 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference for SAOS 6.18.

New No new chapters were added for this release.

Updated The following chapters have been updated: •

“CLI fundamentals” on page 2-1



“Commands” on page 3-1

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

1-2 New in this release

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-1

CLI fundamentals

2-

The Command Line Interface (CLI) is a text-based command interface used to configure a device and to view system information. The CLI allows a maximum of 459 characters, including spaces, to be entered in a command. Attempting to copy-and-paste a command longer than the maximum results in the command being truncated. Note: Not all commands or command options described in this document are available on all devices. The CLI hides commands depending on user access level, installed licenses, and platform. When entering a command at the prompt, ensure that you have the appropriate access level.

CAUTION Possible Service Disruption

Commands not documented in this document should not be used. If you choose to use them, you do so at your own risk as they can cause severe interruption of delivered services and access to the devices you are configuring.

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-2 CLI fundamentals

Navigating the CLI At any prompt, press the Tab key for a list of commands in alphabetical order available from the current prompt. For example, pressing tab on the main level menu on a 3926m lists the following:

Command schema In order to provide consistency across all the commands, all CLI commands follow a basic underlying schema or syntax: [<subobject>] [instance] []

An can identify a feature (such as multicast, per, radius, and so on) or a basic object (such as module, VLAN, port, and so on). On the surface, these seem like completely mismatched entities, however, if a device is considered to have an instance of each of these entities, then both features and the basic system objects can be considered as objects. A <subject> subdivides a feature. For example, multicast has many subfeatures in it such as umf, epf, channel-stream, and so on. An is a verb that describes the type of action that will occur on the object/instance that is specified. Examples of actions are: •

create



delete



add



remove



set



unset



enable



disable



attach

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-3



detach

An defines an recurrence of an object. For example, ports have multiple instances. A feature like radius is an object but there is only a single instance of it. An instance is identified by a keyword and a value, such as “port 2.” are always a pairing of a keyword and a value. For example, the keyword “port” is followed by a value such as 3/1. A command may take multiple attributes and the attributes can be specified in any order relative to one another. As an example, breaking down the command grammar of a command such as “aggregation add agg Lag1 port 2” yields the following: •

object = aggregation



subject = none



action = add



instance = agg Lag1



attribute = port 2

Sub-menus Objects and sub-objects have sub-menus. For example, from the top-level prompt, if you enter “system,” the prompt changes to the system sub-menu and displays, (system)>. The same is true for sub-features, such as system shell. At the (system)> prompt, entering shell changes the prompt to the shell sub-menu under system and displays (system/shell)>. To return to the top-level prompt from any sub-menu, type exit, and press Enter.

Command completion The CLI supports partial command recognition. This means that you can enter the first few characters that uniquely identify a command for the system to recognize it. For example, for the access-flow commands, +you can enter: > ac

and the prompt will then change to: (access-list)>

If you do not enter enough characters to uniquely identify the command, a shell parser error will occur. For example: > s SHELL PARSER FAILURE: 's' - ambiguous input

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-4 CLI fundamentals

This error occurs, because multiple commands begin with “s”. Pressing the Tab key partially completes the command and displays the available commands. For example: > s sm-fabricsnmpsoftwaresshsub-portsyslogsystem

In addition, pressing Space and then Tab at the end of the command string (or partial command string) displays available actions, objects, or sub-objects. For example: > arp delete

flush

for set showunset

After specifying the object, action, instance, and even attributes, you can press Space and then Tab to display additional parameters. For example: >arp for ip ip

Getting help To get more detail about available commands, enter ? or help at any prompt. A command can also be followed by a space and a ? or help and Enter to get a list of valid parameters for that command. For example, the following command lists all the valid parameters for the arp command: > arp ? <Enter> delete flush for set show ^C q|quit| end|exit

delete arp entry flush arp cache for all interfaces check if the ip address is in use set arp options show arp information Enter SubMenu Kill Ongoing Display quit to Root Menu Exit Current Submenu/Mode

In addition, you can display specific objects or search on specific keywords with the cli search and show commands described in “Commands”.

Command response In general, errors are generated for a configuration command only when the command is unsuccessful. For example, if you run a delete command, the CLI responds without any message and returns to the CLI prompt. Even if the object does not exist, the command does not end in error, because the end result is that the specified object does not exist in the system. Similarly, if you attempt to set an attribute that is already set, the CLI responds by returning you to the CLI prompt. If you attempt to create an object that already exists, the CLI responds with an error to show the duplication. 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-5

Understanding command syntax A variety of symbols are used to indicate CLI command syntax. These symbols describe how to enter a command. They are not entered as part of the command itself. Table 2-1 summarizes command syntax symbols. Table 2-1 Command Syntax Symbols Symbol Description <>

Encloses a variable or literal value that must be specified. Some examples include: server priority dns description <String[31]> For server , the attribute could be entered as server 10.10.11.100 or server www.ciena.com. With priority the text within <> indicates that 1 - 7 are valid values. In the example of dns , either the literal value of on or off is valid, such as dns on. For description <String[31]>, any string of up to 31 characters is entered.

{}

Encloses a required value or list of required arguments. One or more values or arguments can be specified. For example, in the syntax: cfm mip create {vlan } {port } [level ] The vlan and port arguments are required. The level argument is optional.

|

Separates mutually exclusive items in a list, only one of which can be entered. For example, in the syntax: dhcp client options set subnet either on or off must be specified, for example: dhcp client options set subnet on

[]

Encloses an optional value or a list of optional arguments. One or more values or arguments can be specified. For example, in the syntax: arp show [interface ] you can enter a value for interface or not. For example: arp show

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-6 CLI fundamentals

Specifying multiple objects with lists and ranges To simplify configuration of multiple objects, some CLI commands allow actions to be specified on multiple ports or slots at once. This is done using object lists and ranges. Each command specifies the CLI variables it accepts. A list of objects can be specified using a comma-delimited list (for example, x, y, z). A range of objects can be specified using a dash (-). For example, “x-z” would properly specify a range. On a multi-module device, a command can apply to multiple modules by specifying a slot list or range. For example, “1,2,3” or “1-3”. Ports on the module are then specified relative to the module. For example, port 1/1 identifies the first port on module in slot 1. Port ranges are generally specified as: <port a>-<port b>. This range specifies all the ports between and including ports 'a' and 'b'. So the range “1/1 - 4/3” would include all the ports present on modules in slots 1, 2, 3 as well as the first 3 ports on the module in slot 4. Lists of ports can be specified as being comma delimited, e.g. “1/1, 1/3, 1/5”. Port lists and ranges can also be combined so that the following is valid, “1/1-1/5,1/ 7”. For a single module device, ports are enumerated with a single ID, e.g. 1, 2, and 3. Lists of ports can be specified as being comma delimited, e.g. “1, 3, 5." Port lists and ranges can also be combined so that the following is valid, “1-4, 7."

Specifying IP addresses An IP address is a string in dotted decimal format for IPv4 and for IPv6. In most cases, the CLI accepts either IPv4 or IPv6 format. For commands cases where only one or the other is accepted, the CLI returns an error if the incorrect IP address format is entered. IPv4 address is represented by IPv4 addresses with “padded” zeros are equal to IP addresses without padded 0s. For instance the IP address 100.004.045.000 is the same as 100.4.45.0. You can enter either the IP address in either format and it will be treated the same. IP addresses are stored to configuration in the unpadded format. An IPv6 address is represented by 8 groups of 16-bit hexadecimal values separated by colons (:). For example: 2001:0db8:85a3:0000:0000:8a2e:0370:7334 The hexadecimal digits are case-insensitive. 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-7

:= An IPv6 address can be abbreviated with the following rules: 1 2

Omit leading zeroes in a 16-bit value. Replace one group of consecutive zeroes by a double colon.

An IPADDRESS can be either and IPv4 address or IPv6 address. You can also enter the IPv4 or IPv6 address with the corresponding subnet mask in the following formats: Cisco Format: /<subnet-mask> Example: 123.23.10.23/255.255.255.0 Juniper Format: /<subnet-bitmask> Example: 123.23.10.23/24 It also accepts 1.2.3.4 alone, in which case it makes up a mask of 255.255.255.255. <-ip-address-subnet-object> := ip /<subnet-bitmask> | ip /<subnet-mask> | ip

Entering names When entering names or descriptions, the following rules apply: •

String length > 0



First character may not be a space



Last character may not be a space



All characters are in the ASCII range 32-126



The following characters are not allowed: " % * ? !



Names are case-sensitive

Specifying common objects and attributes = <String> for example, /flash0/file.txt = <String[127]> <MacAddress>= <xx:xx:xx:xx:xx:xx> 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-8 CLI fundamentals

Hidden and deprecated commands Some commands are designated as deprecated (obsolete) or hidden. Deprecated and hidden commands are still supported by the CLI and work for configuration. Deprecated commands are identified in the command list with the text “(DEPRECATED)”. Hidden commands do not appear in the command list. In a future release, deprecated and hidden commands may be phased out and no longer supported. The following commands are hidden and/or deprecated in this release: CN 3926> cli show hidden aggregation lacpmib set agg admin-key aggregation lacpmib set agg system-priority aggregation lacpmib set port actor-admin-key aggregation lacpmib set port actor-admin-state aggregation lacpmib set port actor-port-priority aggregation lacpmib set port actor-system-priority aggregation lacpmib set port partner-admin-key aggregation lacpmib set port partner-admin-state aggregation lacpmib set port partner-port-priority aggregation lacpmib set port partner-system-id aggregation lacpmib set port partner-system-priority aggregation show agg info aggregation show port info ais clear statistics ais show statistics alarm cutoff benchmark generator clear global-counters benchmark generator pcp-bw-allocation-profile create name benchmark generator pcp-bw-allocation-profile create name pcp benchmark generator pcp-bw-allocation-profile create name pcp bandwidth benchmark generator pcp-bw-allocation-profile delete name benchmark generator pcp-bw-allocation-profile set name pcp benchmark generator pcp-bw-allocation-profile set name pcp bandwidth benchmark generator pcp-bw-allocation-profile show benchmark generator pcp-bw-allocation-profile show name benchmark generator pcp-bw-allocation-profile unset name pcp benchmark generator set pcp-bw-allocation-profile benchmark generator unset pcp-bw-allocation-profile benchmark profile clear name statistics benchmark profile configuration set name pcp-bw-allocation-profile benchmark profile configuration unset name pcp-bw-allocation-profile benchmark profile disable name benchmark profile enable name benchmark profile payload set name color benchmark profile payload set name dstmac benchmark profile payload set name pcp benchmark profile payload set name vid benchmark profile payload unset name color benchmark profile payload unset name dstmac benchmark profile payload unset name pcp benchmark profile payload unset name vid benchmark profile show name statistics benchmark profile show name statistics frameloss benchmark profile show name statistics latency 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-9 benchmark profile show name statistics pdv benchmark profile show name statistics throughput benchmark profile show name throughput statistics last-iteration benchmark profile start name benchmark profile start name dstmac benchmark profile start name dst-mac benchmark profile start name vid benchmark profile stop benchmark profile stop name benchmark profile trigger name connectivity-test benchmark profile trigger name dstmac benchmark profile trigger name dst-mac benchmark profile trigger name vid benchmark reflector clear statistics benchmark reflector set mac-validation benchmark reflector set name advertise-mac benchmark reflector set name advertise-mac-periodicity benchmark reflector set vendor-type benchmark reflector set vid benchmark reflector show statistics benchmark reflector show statistics active benchmark reflector show throughput benchmark reflector unset mac-validation benchmark reflector unset name advertise-mac benchmark reflector unset name advertise-mac-periodicity benchmark reflector unset vendor-type benchmark reflector unset vid benchmark set mode benchmark set port benchmark set role benchmark test show name throughput statistics last-iteration benchmark unset mode benchmark unset port benchmark unset role bfd session create session tunnel bgp add-path set as peer-group bgp add-path unset as peer-group bgp advertisement-interval set as peer-group bgp advertisement-interval unset as peer-group bgp aigp add as nbr cost-community send poi bgp aigp add as nbr cost-community send transitive bgp aigp add as nbr send bgp aigp add as nbr send cost-community bgp aigp add as nbr send med bgp aigp remove as nbr send bgp aigp remove as nbr send cost-community bgp aigp remove as nbr send med bgp connect-retry set as peer-group bgp connect-retry unset as peer-group bgp description set as peer-group bgp description unset as peer-group bgp ebgp-multihop set as peer-group bgp ebgp-multihop unset as peer-group bgp maximum-prefix add as afi bgp maximum-prefix add as max bgp maximum-prefix add as nbr bgp maximum-prefix add as peer-group bgp maximum-prefix add as percent bgp maximum-prefix add as safi bgp maximum-prefix add as warning-only 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-10 CLI fundamentals bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp bgp cfm cfm cfm cfm cfm cfm cfm cfm cfm cfm cfm cfm cfm cfm cfm cfm cfm cfm cfm cfm

maximum-prefix remove as afi maximum-prefix remove as nbr maximum-prefix remove as peer-group maximum-prefix remove as safi mpls-resolution disable as mpls-resolution enable as neighbor add as peer-group neighbor remove as peer-group neighbor set as peer-group neighbor unset as peer-group next-hop-self add as peer-group next-hop-self remove as peer-group password set as password password set as peer-group password set as secret password unset as peer-group peer-group set as nbr afi peer-group set as nbr peer-group peer-group set as nbr safi peer-group unset as nbr afi peer-group unset as nbr safi prefix-list add as peer-group prefix-list remove as peer-group route-map add as peer-group route-map remove as peer-group route-reflector-client add as peer-group route-reflector-client remove as peer-group show advertised-routes nbr neighbor group-name show forwarding-table show ftn show ilm show peer-group show peer-group group-name show received nbr neighbor group-name synchronization disable as synchronization enable as unsuppress-map add as peer-group unsuppress-map remove as peer-group weight add as peer-group weight remove as peer-group delay cancel-mac service delay cancel-mac service local-mepid delay cancel-mac service local-mepid vlan delay cancel-mac service mac delay cancel-mac service port delay cancel-mac service port vlan delay clear service mepid delay send service repeat delay send-mac service count delay send-mac service delay-threshold delay send-mac service jitter-threshold delay send-mac service local-mepid delay send-mac service local-mepid vlan delay send-mac service mac delay send-mac service max-delay-threshold delay send-mac service max-jitter-threshold delay send-mac service port delay send-mac service port vlan delay send-mac service priority delay send-mac service repeat

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-11 cfm frame-loss cancel-mac service local-mepid cfm frame-loss cancel-mac service mac cfm frame-loss cancel-mac service port cfm frame-loss cancel-mac service vlan cfm frame-loss clear service mepid cfm frame-loss send service repeat cfm frame-loss send-mac service count cfm frame-loss send-mac service flf-threshold cfm frame-loss send-mac service fln-threshold cfm frame-loss send-mac service local-mepid cfm frame-loss send-mac service mac cfm frame-loss send-mac service port cfm frame-loss send-mac service priority cfm frame-loss send-mac service repeat cfm frame-loss send-mac service seq-threshold cfm frame-loss send-mac service vlan cfm mef delay create service session-id cfm mef synthetic-loss create service session-id cfm mep set service ltm-priority(DEPRECATED) cfm mip set(DEPRECATED) vlan port level cfm mip set(DEPRECATED) vs level cfm mip set(DEPRECATED) vs port cfm mip set(DEPRECATED) vs vlan cfm service set service dmm-interval cfm service set service lmm-interval cfm synthetic-loss clear service mepid cfm synthetic-loss show service verbose chassis set dying-gasp chassis show attributes chassis show dying-gasp cli search keyword batch-mode-only cli search keyword config-only cli search keyword disabled-only cli search keyword during-config cli search keyword hidden-only cli search keyword include-config-only cli search keyword include-disabled cli search keyword include-hidden cli search keyword include-unlicensed cli search keyword interactive-mode-only cli search keyword interactive-only cli search keyword unlicensed-only cli show batch-mode-only cli show config-only cli show disabled-only cli show during-config cli show hidden-only cli show include-config-only cli show include-disabled cli show include-hidden cli show include-unlicensed cli show interactive-mode-only cli show interactive-only cli show unlicensed-only configuration augment default-server secret-sftp-passphrase configuration augment default-server sftp-passphrase configuration augment default-sftp-server secret-sftp-passphrase configuration augment default-sftp-server sftp-passphrase configuration augment login-id default-ftp-server password configuration augment login-id default-ftp-server secret 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-12 CLI fundamentals configuration augment login-id default-server password configuration augment login-id default-server secret configuration augment login-id default-sftp-server password configuration augment login-id default-sftp-server secret configuration augment login-id ftp-server password configuration augment login-id ftp-server secret configuration augment login-id sftp-server password configuration augment login-id sftp-server secret configuration augment sftp-server secret-sftp-passphrase configuration augment sftp-server sftp-passphrase configuration check default-server secret-sftp-passphrase configuration check default-server sftp-passphrase configuration check default-sftp-server secret-sftp-passphrase configuration check default-sftp-server sftp-passphrase configuration check login-id default-ftp-server password configuration check login-id default-ftp-server secret configuration check login-id default-server password configuration check login-id default-server secret configuration check login-id default-sftp-server password configuration check login-id default-sftp-server secret configuration check login-id ftp-server password configuration check login-id ftp-server secret configuration check login-id sftp-server password configuration check login-id sftp-server secret configuration check sftp-server secret-sftp-passphrase configuration check sftp-server sftp-passphrase configuration install default-server secret-sftp-passphrase configuration install default-server sftp-passphrase configuration install default-sftp-server secret-sftp-passphrase configuration install default-sftp-server sftp-passphrase configuration install login-id default-ftp-server password configuration install login-id default-ftp-server secret configuration install login-id default-server password configuration install login-id default-server secret configuration install login-id default-sftp-server password configuration install login-id default-sftp-server secret configuration install login-id ftp-server password configuration install login-id ftp-server secret configuration install login-id sftp-server password configuration install login-id sftp-server secret configuration install sftp-server secret-sftp-passphrase configuration install sftp-server sftp-passphrase configuration save filename include-default-settings configuration save include-default-settings configuration show include-default-settings dhcp security set password dhcp v6-client(DEPRECATED) clear statistics dhcp v6-client(DEPRECATED) disable dhcp v6-client(DEPRECATED) enable dhcp v6-client(DEPRECATED) lease renew dhcp v6-client(DEPRECATED) options set bootfile-url dhcp v6-client(DEPRECATED) options set dns-servers dhcp v6-client(DEPRECATED) options set domain-list dhcp v6-client(DEPRECATED) options set ntp-servers dhcp v6-client(DEPRECATED) options set posix-timezone dhcp v6-client(DEPRECATED) options set tzdb-timezone dhcp v6-client(DEPRECATED) options show dhcp v6-client(DEPRECATED) options unset bootfile-url dhcp v6-client(DEPRECATED) options unset dns-servers dhcp v6-client(DEPRECATED) options unset domain-list 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-13 dhcp v6-client(DEPRECATED) options unset ntp-servers dhcp v6-client(DEPRECATED) options unset posix-timezone dhcp v6-client(DEPRECATED) options unset tzdb-timezone dhcp v6-client(DEPRECATED) rapid-commit disable dhcp v6-client(DEPRECATED) rapid-commit enable dhcp v6-client(DEPRECATED) rapid-commit show dhcp v6-client(DEPRECATED) set interface dhcp v6-client(DEPRECATED) set preferred-lifetime dhcp v6-client(DEPRECATED) set valid-lifetime dhcp v6-client(DEPRECATED) show dhcp v6-client(DEPRECATED) show options dhcp v6-client(DEPRECATED) show state dhcp v6-client(DEPRECATED) show statistics dhcp v6-client(DEPRECATED) unset interface dhcp v6-client(DEPRECATED) unset preferred-lifetime dhcp v6-client(DEPRECATED) unset valid-lifetime dot1x auth set port supp-timeout dot1x auth show stats dot1x auth unset port supp-timeout dot1x supp certificate show port dot1x supp set port password dot1x supp set port secret dot1x supp show stats dot1x supp unset port secret file reboot file reboot flow access-control create(DEPRECATED) port flow access-control create(DEPRECATED) port forward-unlearned flow access-control create(DEPRECATED) port max-dynamic-macs flow access-control delete(DEPRECATED) port flow cpu-rate-limit set port eprarp(DEPRECATED) flow cpu-rate-limit set port inet(DEPRECATED) flow cpu-rate-limit set port pearp(DEPRECATED) flow cpu-rate-limit set port rstp(DEPRECATED) flow cpu-rate-limit unset port eprarp(DEPRECATED) flow cpu-rate-limit unset port inet(DEPRECATED) flow cpu-rate-limit unset port pearp(DEPRECATED) flow cpu-rate-limit unset port rstp(DEPRECATED) gmpls tp-tunnel create rsvp-ingress-corout logical-id gmpls tp-tunnel create rsvp-ingress-unidir logical-id gmpls tp-tunnel create static-egress-corout logical-id gmpls tp-tunnel create static-egress-unidir logical-id gmpls tp-tunnel create static-ingress-assoc logical-id gmpls tp-tunnel create static-ingress-corout cos-profile gmpls tp-tunnel create static-ingress-corout logical-id gmpls tp-tunnel create static-ingress-unidir logical-id gmpls tp-tunnel create static-transit-corout logical-id gmpls tp-tunnel create static-transit-unidir logical-id interface create ip-interface data-only interface create ip-interface max-reservable-bandwidth interface create ip-interface neighbor-ip interface create ip-interface routing-domain interface create ip-interface signal-only interface create ip-interface subnet-mask interface create ip-interface te-profile interface create loopback routing-domain interface create te-profile max-bandwidth interface create te-profile min-bandwidth interface create te-profile priority interface ip-acl add ip 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-14 CLI fundamentals interface ip-acl add netmask interface ip-acl remove ip interface ip-acl remove netmask interface ip-acl set netmask interface local set subnet interface remote set subnet interface route add genmask interface route remove genmask interface set ip-interface max-reservable-bandwidth interface set ip-interface subnet-mask ip aib show details ip aib show summary ip fib interfaces show details ip fib interfaces show summary ip fib show details ip fib show summary ip route add genmask ip route add routing-domain ip route remove genmask ip route remove metric ip route remove routing-domain ip route show routing-domain isis area-authentication set isis-instance password isis area-authentication set isis-instance secret isis domain-authentication set isis-instance secret isis instance create isis-instance logical-id isis instance create isis-instance routing-domain isis interface-authentication set ip-interface password isis interface-authentication set ip-interface secret ldp authentication set password ldp authentication set secret ldp show entity log flash add filter max-severity log flash add filter min-severity log flash create filter max-severity log flash create filter min-severity log flash remove filter max-severity log flash remove filter min-severity log flash set filter max-severity log flash set filter min-severity log ram add filter max-severity log ram add filter min-severity log ram create filter max-severity log ram create filter min-severity log ram remove filter max-severity log ram remove filter min-severity log ram set filter max-severity log ram set filter min-severity log ram set global-notify mpls l2-vpn create dynamic-vc service-delimiter-tpid mpls l2-vpn create dynamic-vc service-delimiter-vid mpls l2-vpn create static-vc peer-group-id mpls l2-vpn create static-vc service-delimiter-tpid mpls l2-vpn create static-vc service-delimiter-vid mpls l2-vpn pw-cos-profile create cos-profile logical-id mpls l2-vpn pw-vccv-profile create vccv-profile logical-id mpls l2-vpn set dynamic-vc service-delimiter-tpid mpls l2-vpn set dynamic-vc service-delimiter-vid mpls l2-vpn set static-vc service-delimiter-tpid mpls l2-vpn set static-vc service-delimiter-vid 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-15 mpls l2-vpn show matching-vc detail mpls l2-vpn show matching-vc internal mpls l2-vpn show matching-vc service-delimiter-tpid mpls l2-vpn show matching-vc service-delimiter-vid mpls l2-vpn show matching-vc-by-vs detail mpls l2-vpn show matching-vc-by-vs internal mpls l2-vpn unset dynamic-vc service-delimiter-tpid mpls l2-vpn unset dynamic-vc service-delimiter-vid mpls l2-vpn unset static-vc service-delimiter-tpid mpls l2-vpn unset static-vc service-delimiter-vid mpls traffic-eng class-type-profile create class-profile logical-id mpls traffic-eng resource-color-group create color-group logical-id mpls tunnel create bidir-ingress-assoc logical-id mpls tunnel create rsvp-ingress logical-id mpls tunnel create static-egress logical-id mpls tunnel create static-ingress logical-id mpls tunnel create static-transit logical-id mpls tunnel-auto-fb-profile create auto-fb-profile logical-id mpls tunnel-bandwidth-profile create bandwidth-profile logical-id mpls tunnel-cos-profile create cos-profile logical-id mpls tunnel-frr-profile create frr-profile hop-limit mpls tunnel-frr-profile create frr-profile logical-id mpls tunnel-frr-profile create frr-profile protection-method mpls tunnel-frr-profile set frr-profile hop-limit mpls tunnel-frr-profile set frr-profile protection-method mpls tunnel-frr-profile unset frr-profile hop-limit mpls tunnel-frr-profile unset frr-profile protection-method multicast-services igmp-snooping reset vlan default-router-port multicast-services igmp-snooping reset vlan router-address-range multicast-services igmp-snooping reset vs default-router-interface multicast-services igmp-snooping reset vs router-address-range multicast-services igmp-snooping set vlan compatibility-mode(DEPRECATED) multicast-services igmp-snooping set vlan min-response-time(DEPRECATED) multicast-services igmp-snooping set vs compatibility-mode(DEPRECATED) multicast-services igmp-snooping set vs min-response-time(DEPRECATED) ntp authentication import default-server secret-sftp-passphrase ntp authentication import default-server sftp-passphrase ntp authentication import default-sftp-server secret-sftp-passphrase ntp authentication import default-sftp-server sftp-passphrase ntp authentication import login-id default-ftp-server password ntp authentication import login-id default-ftp-server secret ntp authentication import login-id default-server password ntp authentication import login-id default-server secret ntp authentication import login-id default-sftp-server password ntp authentication import login-id default-sftp-server secret ntp authentication import login-id ftp-server password ntp authentication import login-id ftp-server secret ntp authentication import login-id sftp-server password ntp authentication import login-id sftp-server secret ntp authentication import sftp-server secret-sftp-passphrase ntp authentication import sftp-server sftp-passphrase ntp authentication secret key-id md5 ntp authentication secret key-id sha1 ntp-client add multicast-server ntp-client add server ntp-client add server key-id ntp-client clear drift ntp-client disable ntp-client disable server ntp-client enable 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-16 CLI fundamentals ntp-client enable server ntp-client md5-auth add key-id md5 ntp-client md5-auth disable ntp-client md5-auth enable ntp-client md5-auth import filename ntp-client md5-auth remove key-id ntp-client md5-auth secret key-id md5 ntp-client md5-auth show ntp-client remove multicast-server ntp-client remove server ntp-client set max-polling-interval ntp-client set min-polling-interval ntp-client set mode ntp-client set polling-interval ntp-client set server key-id ntp-client set sync-change-notification ntp-client show ntp-client show keys ntp-client show oper ntp-client show server ntp-client show state ospf instance create ospf-instance routing-domain ospf interface set ip-interface authentication-type password ospf interface set ip-interface authentication-type passwordsecret(DEPRECATED) ospf interface set ip-interface authentication-type secret pm bulkstats create bulkstats-collector logical-id pm bulkstats create bulkstats-collector login-id ftp-server password pm bulkstats create bulkstats-collector login-id ftp-server secret pm bulkstats create bulkstats-collector login-id sftp-server password pm bulkstats create bulkstats-collector login-id sftp-server secret pm bulkstats create bulkstats-collector sftp-server secret-sftp-passphrase pm bulkstats create bulkstats-collector sftp-server sftp-passphrase pm bulkstats create bulkstats-instance format pm bulkstats create bulkstats-instance logical-id pm bulkstats set bulkstats-collector login-id ftp-server password pm bulkstats set bulkstats-collector login-id ftp-server secret pm bulkstats set bulkstats-collector login-id sftp-server password pm bulkstats set bulkstats-collector login-id sftp-server secret pm bulkstats set bulkstats-collector sftp-server secret-sftp-passphrase pm bulkstats set bulkstats-collector sftp-server sftp-passphrase pm create mpls-bgp-egress pm-instance logical-id pm create mpls-bgp-ingress pm-instance logical-id pm create mpls-bgp-transit pm-instance logical-id pm create mpls-rsvp-egress pm-instance logical-id pm create mpls-rsvp-ingress pm-instance logical-id pm create mpls-rsvp-transit pm-instance logical-id pm create port pm-instance logical-id pm create port-queue-group pm-instance logical-id pm create queue-group-profile pm-instance logical-id pm create tdm-port pm-instance logical-id pm create tdm-vc pm-instance logical-id pm create tp-rsvp-egress-corout pm-instance logical-id pm create tp-rsvp-egress-unidir pm-instance logical-id pm create tp-rsvp-ingress-corout pm-instance logical-id pm create tp-rsvp-ingress-unidir pm-instance logical-id pm create tp-rsvp-transit-corout pm-instance logical-id pm create tp-rsvp-transit-unidir pm-instance logical-id pm threshold create interval-profile logical-id port monitor active 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-17 port monitor delay port monitor scale port tdm ds3-e3 reset ds3-e3 port tdm oc12-stm4 reset oc12-stm4 port tdm oc3-stm1 reset oc3-stm1 port tdm set oc12-SJB-enabled radius add server radius add server priority radius add server udp-port radius add server use-for radius disable server radius dot1x-acct set secret radius dot1x-acct unset key radius dot1x-acct unset secret radius dot1x-auth set secret radius dot1x-auth unset key radius dot1x-auth unset secret radius enable server radius remove server radius set key radius set retries radius set search-method radius set secret radius set server priority radius set server udp-port radius set server use-for radius set timeout radius show stats radius unset key radius unset secret radius user-acct set secret radius user-acct unset key radius user-acct unset secret radius user-login set secret radius user-login unset key radius user-login unset secret ring-protection logical-ring create logical-ring-name WTR ring-protection logical-ring set ring WTR ring-protection logical-ring unset ring WTR rmon alarm add alarm-index index rmon alarm add data-source rmon alarm add falling-event-index rmon alarm add falling-threshold rmon alarm add index rmon alarm add interval rmon alarm add owner rmon alarm add rising-event-index rmon alarm add rising-threshold rmon alarm add sample-type rmon alarm add startup-alarm rmon alarm remove index rmon event add community(DEPRECATED) rmon event add description(DEPRECATED) rmon event add index(DEPRECATED) rmon event add owner(DEPRECATED) rmon event add type(DEPRECATED) rmon event remove index rmon file(DEPRECATED) interval rmon file(DEPRECATED) name rmon file(DEPRECATED) remote-file-dir 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-18 CLI fundamentals rmon file(DEPRECATED) server rmon file(DEPRECATED) state rmon history add data-source rmon history add file-logging rmon history add hist-index data-source rmon history add index rmon history add interval rmon history add num-buckets rmon history add owner rmon history remove index rmon set(DEPRECATED) file(DEPRECATED) default-ftp-server rmon set(DEPRECATED) file(DEPRECATED) default-ftp-server login-id rmon set(DEPRECATED) file(DEPRECATED) default-ftp-server server-port rmon set(DEPRECATED) file(DEPRECATED) default-server rmon set(DEPRECATED) file(DEPRECATED) default-server echoless-sftp-passphrase rmon set(DEPRECATED) file(DEPRECATED) default-server login-id rmon set(DEPRECATED) file(DEPRECATED) default-server secret-sftp-passphrase rmon set(DEPRECATED) file(DEPRECATED) default-server server-port rmon set(DEPRECATED) file(DEPRECATED) default-server sftp-passphrase rmon set(DEPRECATED) file(DEPRECATED) default-sftp-server rmon set(DEPRECATED) file(DEPRECATED) default-sftp-server echoless-sftppassphrase rmon set(DEPRECATED) file(DEPRECATED) default-sftp-server login-id rmon set(DEPRECATED) file(DEPRECATED) default-sftp-server secret-sftppassphrase rmon set(DEPRECATED) file(DEPRECATED) default-sftp-server server-port rmon set(DEPRECATED) file(DEPRECATED) default-sftp-server sftp-passphrase rmon set(DEPRECATED) file(DEPRECATED) default-tftp-server rmon set(DEPRECATED) file(DEPRECATED) default-tftp-server server-port rmon set(DEPRECATED) file(DEPRECATED) ftp-server rmon set(DEPRECATED) file(DEPRECATED) ftp-server login-id rmon set(DEPRECATED) file(DEPRECATED) ftp-server server-port rmon set(DEPRECATED) file(DEPRECATED) interval rmon set(DEPRECATED) file(DEPRECATED) login-id default-ftp-server echolesspassword rmon set(DEPRECATED) file(DEPRECATED) login-id default-ftp-server password rmon set(DEPRECATED) file(DEPRECATED) login-id default-ftp-server secret rmon set(DEPRECATED) file(DEPRECATED) login-id default-server echolesspassword rmon set(DEPRECATED) file(DEPRECATED) login-id default-server password rmon set(DEPRECATED) file(DEPRECATED) login-id default-server secret rmon set(DEPRECATED) file(DEPRECATED) login-id default-sftp-server echolesspassword rmon set(DEPRECATED) file(DEPRECATED) login-id default-sftp-server password rmon set(DEPRECATED) file(DEPRECATED) login-id default-sftp-server secret rmon set(DEPRECATED) file(DEPRECATED) login-id ftp-server echoless-password rmon set(DEPRECATED) file(DEPRECATED) login-id ftp-server password rmon set(DEPRECATED) file(DEPRECATED) login-id ftp-server secret rmon set(DEPRECATED) file(DEPRECATED) login-id sftp-server echoless-password rmon set(DEPRECATED) file(DEPRECATED) login-id sftp-server password rmon set(DEPRECATED) file(DEPRECATED) login-id sftp-server secret rmon set(DEPRECATED) file(DEPRECATED) name rmon set(DEPRECATED) file(DEPRECATED) num-files rmon set(DEPRECATED) file(DEPRECATED) push-local rmon set(DEPRECATED) file(DEPRECATED) remote-file-dir rmon set(DEPRECATED) file(DEPRECATED) server rmon set(DEPRECATED) file(DEPRECATED) server server-port rmon set(DEPRECATED) file(DEPRECATED) sftp-server rmon set(DEPRECATED) file(DEPRECATED) sftp-server echoless-sftp-passphrase rmon set(DEPRECATED) file(DEPRECATED) sftp-server login-id 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-19 rmon set(DEPRECATED) file(DEPRECATED) sftp-server secret-sftp-passphrase rmon set(DEPRECATED) file(DEPRECATED) sftp-server server-port rmon set(DEPRECATED) file(DEPRECATED) sftp-server sftp-passphrase rmon set(DEPRECATED) file(DEPRECATED) state rmon set(DEPRECATED) file(DEPRECATED) tftp-server rmon set(DEPRECATED) file(DEPRECATED) tftp-server server-port rmon set(DEPRECATED) history auto-configure rmon set(DEPRECATED) history file-logging rmon set(DEPRECATED) history interval rmon set(DEPRECATED) history num-buckets rmon set(DEPRECATED) history owner rmon set(DEPRECATED) history statistics rmon set(DEPRECATED) history stats rmon show alarm-table rmon show config rmon show event-table rmon show file-persistence rmon show user-history rmon statistics add data-source rmon statistics add index rmon statistics add owner rmon statistics remove index rmon transfer set default-server secret-sftp-passphrase rmon transfer set default-server sftp-passphrase rmon transfer set default-sftp-server secret-sftp-passphrase rmon transfer set default-sftp-server sftp-passphrase rmon transfer set login-id default-ftp-server password rmon transfer set login-id default-ftp-server secret rmon transfer set login-id default-server password rmon transfer set login-id default-server secret rmon transfer set login-id default-sftp-server password rmon transfer set login-id default-sftp-server secret rmon transfer set login-id ftp-server password rmon transfer set login-id ftp-server secret rmon transfer set login-id sftp-server password rmon transfer set login-id sftp-server secret rmon transfer set sftp-server secret-sftp-passphrase rmon transfer set sftp-server sftp-passphrase rmon unset(DEPRECATED) file ftp-server rmon unset(DEPRECATED) file login-id rmon unset(DEPRECATED) file name rmon unset(DEPRECATED) file password rmon unset(DEPRECATED) file remote-file-dir rmon unset(DEPRECATED) file secret rmon unset(DEPRECATED) file server rmon unset(DEPRECATED) file tftp-server rmon usr-history add-control(DEPRECATED) buckets rmon usr-history add-control(DEPRECATED) file-logging rmon usr-history add-control(DEPRECATED) index rmon usr-history add-control(DEPRECATED) interval rmon usr-history add-control(DEPRECATED) num-buckets rmon usr-history add-control(DEPRECATED) owner rmon usr-history add-object(DEPRECATED) control-index rmon usr-history add-object(DEPRECATED) index rmon usr-history add-object(DEPRECATED) object rmon usr-history add-object(DEPRECATED) sample-type rmon usr-history remove-control(DEPRECATED) index rmon usr-history remove-object(DEPRECATED) control-Index rmon usr-history remove-object(DEPRECATED) index route-map match-interface add map-name action 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-20 CLI fundamentals route-map match-interface add map-name interface-name route-map match-interface add map-name seq route-map match-interface remove map-name action route-map match-interface remove map-name seq route-map match-length add map-name action route-map match-length add map-name max route-map match-length add map-name min route-map match-length add map-name seq route-map match-length remove map-name action route-map match-length remove map-name seq route-map match-metric add map-name action route-map match-metric add map-name seq route-map match-metric add map-name value route-map match-metric remove map-name action route-map match-metric remove map-name seq route-map match-origin add map-name action route-map match-origin add map-name seq route-map match-origin add map-name type route-map match-origin remove map-name action route-map match-origin remove map-name seq route-map match-tag add map-name action route-map match-tag add map-name seq route-map match-tag add map-name value route-map match-tag remove map-name action route-map match-tag remove map-name seq route-map set-aggregator add map-name action route-map set-aggregator add map-name as route-map set-aggregator add map-name ip route-map set-aggregator add map-name seq route-map set-aggregator remove map-name action route-map set-aggregator remove map-name seq route-map set-as-path add map-name action route-map set-as-path add map-name prepend route-map set-as-path add map-name seq route-map set-as-path add map-name tag route-map set-as-path remove map-name action route-map set-as-path remove map-name prepend route-map set-as-path remove map-name seq route-map set-as-path remove map-name tag route-map set-origin add map-name action route-map set-origin add map-name seq route-map set-origin add map-name type route-map set-origin remove map-name action route-map set-origin remove map-name seq route-map set-originator-id add map-name action route-map set-originator-id add map-name ip route-map set-originator-id add map-name seq route-map set-originator-id remove map-name action route-map set-originator-id remove map-name seq route-map set-tag add map-name action route-map set-tag add map-name seq route-map set-tag add map-name value route-map set-tag remove map-name action route-map set-tag remove map-name seq route-map set-weight add map-name action route-map set-weight add map-name seq route-map set-weight add map-name value route-map set-weight remove map-name action route-map set-weight remove map-name seq routing-domain show routing-domain 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-21 rsvp-te authentication set authentication-type message-digest-secret rsvp-te authentication set authentication-type password rsvp-te path create rsvp-path logical-id rsvp-te set ip-interface authentication-type message-digest-secret rsvp-te set ip-interface authentication-type password snmp show targetParams software install default-server secret-sftp-passphrase software install default-server sftp-passphrase software install default-sftp-server secret-sftp-passphrase software install default-sftp-server sftp-passphrase software install login-id default-ftp-server password software install login-id default-ftp-server secret software install login-id default-server password software install login-id default-server secret software install login-id default-sftp-server password software install login-id default-sftp-server secret software install login-id ftp-server password software install login-id ftp-server secret software install login-id sftp-server password software install login-id sftp-server secret software install server software install server server-port software install sftp-server secret-sftp-passphrase software install sftp-server sftp-passphrase software license install default-server secret-sftp-passphrase software license install default-server sftp-passphrase software license install default-sftp-server secret-sftp-passphrase software license install default-sftp-server sftp-passphrase software license install login-id default-ftp-server password software license install login-id default-ftp-server secret software license install login-id default-server password software license install login-id default-server secret software license install login-id default-sftp-server password software license install login-id default-sftp-server secret software license install login-id ftp-server password software license install login-id ftp-server secret software license install login-id sftp-server password software license install login-id sftp-server secret software license install server software license install server server-port software license install sftp-server secret-sftp-passphrase software license install sftp-server sftp-passphrase software report-sequence install default-server secret-sftp-passphrase software report-sequence install default-server sftp-passphrase software report-sequence install default-sftp-server secret-sftp-passphrase software report-sequence install default-sftp-server sftp-passphrase software report-sequence install login-id default-ftp-server password software report-sequence install login-id default-ftp-server secret software report-sequence install login-id default-server password software report-sequence install login-id default-server secret software report-sequence install login-id default-sftp-server password software report-sequence install login-id default-sftp-server secret software report-sequence install login-id ftp-server password software report-sequence install login-id ftp-server secret software report-sequence install login-id sftp-server password software report-sequence install login-id sftp-server secret software report-sequence install server software report-sequence install server server-port software report-sequence install sftp-server secret-sftp-passphrase software report-sequence install sftp-server sftp-passphrase 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-22 CLI fundamentals software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software software

report-sequence run default-server secret-sftp-passphrase report-sequence run default-server sftp-passphrase report-sequence run default-sftp-server secret-sftp-passphrase report-sequence run default-sftp-server sftp-passphrase report-sequence run login-id default-ftp-server password report-sequence run login-id default-ftp-server secret report-sequence run login-id default-server password report-sequence run login-id default-server secret report-sequence run login-id default-sftp-server password report-sequence run login-id default-sftp-server secret report-sequence run login-id ftp-server password report-sequence run login-id ftp-server secret report-sequence run login-id sftp-server password report-sequence run login-id sftp-server secret report-sequence run server report-sequence run server server-port report-sequence run sftp-server secret-sftp-passphrase report-sequence run sftp-server sftp-passphrase report-sequence upgrade connection-timeout report-sequence upgrade default-server secret-sftp-passphrase report-sequence upgrade default-server sftp-passphrase report-sequence upgrade default-sftp-server secret-sftp-passphrase report-sequence upgrade default-sftp-server sftp-passphrase report-sequence upgrade login-id default-ftp-server password report-sequence upgrade login-id default-ftp-server secret report-sequence upgrade login-id default-server password report-sequence upgrade login-id default-server secret report-sequence upgrade login-id default-sftp-server password report-sequence upgrade login-id default-sftp-server secret report-sequence upgrade login-id ftp-server password report-sequence upgrade login-id ftp-server secret report-sequence upgrade login-id sftp-server password report-sequence upgrade login-id sftp-server secret report-sequence upgrade retries report-sequence upgrade retry-interval report-sequence upgrade server report-sequence upgrade server server-port report-sequence upgrade sftp-server secret-sftp-passphrase report-sequence upgrade sftp-server sftp-passphrase report-sequence upgrade user run default-server secret-sftp-passphrase run default-server sftp-passphrase run default-sftp-server secret-sftp-passphrase run default-sftp-server sftp-passphrase run login-id default-ftp-server password run login-id default-ftp-server secret run login-id default-server password run login-id default-server secret run login-id default-sftp-server password run login-id default-sftp-server secret run login-id ftp-server password run login-id ftp-server secret run login-id sftp-server password run login-id sftp-server secret run server run server server-port run sftp-server secret-sftp-passphrase run sftp-server sftp-passphrase upgrade connection-timeout upgrade default-server secret-sftp-passphrase

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-23 software upgrade default-server sftp-passphrase software upgrade default-sftp-server secret-sftp-passphrase software upgrade default-sftp-server sftp-passphrase software upgrade ipv6-server software upgrade login-id default-ftp-server password software upgrade login-id default-ftp-server secret software upgrade login-id default-server password software upgrade login-id default-server secret software upgrade login-id default-sftp-server password software upgrade login-id default-sftp-server secret software upgrade login-id ftp-server password software upgrade login-id ftp-server secret software upgrade login-id sftp-server password software upgrade login-id sftp-server secret software upgrade retries software upgrade retry-interval software upgrade server software upgrade server server-port software upgrade sftp-server secret-sftp-passphrase software upgrade sftp-server sftp-passphrase software upgrade user ssh client key export user default-server secret-sftp-passphrase ssh client key export user default-server sftp-passphrase ssh client key export user default-sftp-server secret-sftp-passphrase ssh client key export user default-sftp-server sftp-passphrase ssh client key export user login-id default-ftp-server password ssh client key export user login-id default-ftp-server secret ssh client key export user login-id default-server password ssh client key export user login-id default-server secret ssh client key export user login-id default-sftp-server password ssh client key export user login-id default-sftp-server secret ssh client key export user login-id ftp-server password ssh client key export user login-id ftp-server secret ssh client key export user login-id sftp-server password ssh client key export user login-id sftp-server secret ssh client key export user passphrase ssh client key export user sftp-server secret-sftp-passphrase ssh client key export user sftp-server sftp-passphrase ssh client key generate user passphrase ssh client key install user default-server secret-sftp-passphrase ssh client key install user default-server sftp-passphrase ssh client key install user default-sftp-server secret-sftp-passphrase ssh client key install user default-sftp-server sftp-passphrase ssh client key install user login-id default-ftp-server password ssh client key install user login-id default-ftp-server secret ssh client key install user login-id default-server password ssh client key install user login-id default-server secret ssh client key install user login-id default-sftp-server password ssh client key install user login-id default-sftp-server secret ssh client key install user login-id ftp-server password ssh client key install user login-id ftp-server secret ssh client key install user login-id sftp-server password ssh client key install user login-id sftp-server secret ssh client key install user sftp-server secret-sftp-passphrase ssh client key install user sftp-server sftp-passphrase ssh server key install user default-server secret-sftp-passphrase ssh server key install user default-server sftp-passphrase ssh server key install user default-sftp-server secret-sftp-passphrase ssh server key install user default-sftp-server sftp-passphrase ssh server key install user login-id default-ftp-server password 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-24 CLI fundamentals ssh server key install user login-id default-ftp-server secret ssh server key install user login-id default-server password ssh server key install user login-id default-server secret ssh server key install user login-id default-sftp-server password ssh server key install user login-id default-sftp-server secret ssh server key install user login-id ftp-server password ssh server key install user login-id ftp-server secret ssh server key install user login-id sftp-server password ssh server key install user login-id sftp-server secret ssh server key install user sftp-server secret-sftp-passphrase ssh server key install user sftp-server sftp-passphrase ssh server show key ssh-server add client ssh-server disable ssh-server enable ssh-server key generate ssh-server remove client ssh-server set authentication-retries ssh-server set listener-port ssh-server show ssh-server unset authentication-retries ssh-server unset listener-port syslog add collector max-severity syslog add collector min-severity syslog set collector max-severity syslog set collector min-severity system ftp set connection-timeout system ftp set mode system ftp set password system ftp set retries system ftp set retry-interval system ftp set server system ftp set user system ftp show system ps show blockId(DEPRECATED) system security ca-certificate show system security ca-certificate show ca-cert-hash system security crl show system security crl show crl-hash system set time-zone system shell session set time-zone system shell session show time-zone system shell session show time-zones system shell session unset time-zone system shell set global-login-timeout system shell set global-login-timer system shell set login-banner-file(DEPRECATED) system shell set more system shell set more-lines system shell set welcome-banner-file(DEPRECATED) system shell unset login-banner-file(DEPRECATED) system shell unset more system shell unset more-lines system shell unset welcome-banner-file(DEPRECATED) system show load-query(DEPRECATED) system show memory-usage system show time-zone system show time-zones system state-dump default-server secret-sftp-passphrase system state-dump default-server sftp-passphrase 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-25 system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system system

state-dump default-sftp-server secret-sftp-passphrase state-dump default-sftp-server sftp-passphrase state-dump exclude-linux-files state-dump include-optics state-dump login-id default-ftp-server password state-dump login-id default-ftp-server secret state-dump login-id default-server password state-dump login-id default-server secret state-dump login-id default-sftp-server password state-dump login-id default-sftp-server secret state-dump login-id ftp-server password state-dump login-id ftp-server secret state-dump login-id sftp-server password state-dump login-id sftp-server secret state-dump sftp-server secret-sftp-passphrase state-dump sftp-server sftp-passphrase unset time-zone xftp getfile default-server secret-sftp-passphrase xftp getfile default-server sftp-passphrase xftp getfile default-sftp-server secret-sftp-passphrase xftp getfile default-sftp-server sftp-passphrase xftp getfile login-id default-ftp-server password xftp getfile login-id default-ftp-server secret xftp getfile login-id default-server password xftp getfile login-id default-server secret xftp getfile login-id default-sftp-server password xftp getfile login-id default-sftp-server secret xftp getfile login-id ftp-server password xftp getfile login-id ftp-server secret xftp getfile login-id sftp-server password xftp getfile login-id sftp-server secret xftp getfile login-id url password xftp getfile login-id url secret xftp getfile sftp-server secret-sftp-passphrase xftp getfile sftp-server sftp-passphrase xftp putfile default-server secret-sftp-passphrase xftp putfile default-server sftp-passphrase xftp putfile default-sftp-server secret-sftp-passphrase xftp putfile default-sftp-server sftp-passphrase xftp putfile login-id default-ftp-server password xftp putfile login-id default-ftp-server secret xftp putfile login-id default-server password xftp putfile login-id default-server secret xftp putfile login-id default-sftp-server password xftp putfile login-id default-sftp-server secret xftp putfile login-id ftp-server password xftp putfile login-id ftp-server secret xftp putfile login-id sftp-server password xftp putfile login-id sftp-server secret xftp putfile login-id url password xftp putfile login-id url secret xftp putfile sftp-server secret-sftp-passphrase xftp putfile sftp-server sftp-passphrase xftp set ftp-server password xftp set ftp-server secret xftp set secret-sftp-passphrase xftp set sftp-server password xftp set sftp-server secret xftp set sftp-server secret-sftp-passphrase xftp set sftp-server sftp-passphrase

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-26 CLI fundamentals system xftp sftp-client algorithm compression disable algorithm system xftp sftp-client algorithm compression enable algorithm system xftp sftp-client algorithm compression set algorithm system xftp sftp-client algorithm compression set priority system xftp sftp-client algorithm compression show system xftp sftp-client algorithm compression unset algorithm system xftp sftp-client algorithm compression unset priority system xftp sftp-client algorithm encryption disable algorithm system xftp sftp-client algorithm encryption enable algorithm system xftp sftp-client algorithm encryption set algorithm system xftp sftp-client algorithm encryption set priority system xftp sftp-client algorithm encryption show system xftp sftp-client algorithm encryption unset algorithm system xftp sftp-client algorithm encryption unset priority system xftp sftp-client algorithm kex disable algorithm system xftp sftp-client algorithm kex enable algorithm system xftp sftp-client algorithm kex set algorithm system xftp sftp-client algorithm kex set priority system xftp sftp-client algorithm kex show system xftp sftp-client algorithm kex unset algorithm system xftp sftp-client algorithm kex unset priority system xftp sftp-client algorithm mac disable algorithm system xftp sftp-client algorithm mac enable algorithm system xftp sftp-client algorithm mac set algorithm system xftp sftp-client algorithm mac set priority system xftp sftp-client algorithm mac show system xftp sftp-client algorithm mac unset algorithm system xftp sftp-client algorithm mac unset priority system xftp sftp-client algorithm server-host-key disable algorithm system xftp sftp-client algorithm server-host-key enable algorithm system xftp sftp-client algorithm server-host-key set algorithm system xftp sftp-client algorithm server-host-key set priority system xftp sftp-client algorithm server-host-key show system xftp sftp-client algorithm server-host-key unset algorithm system xftp sftp-client algorithm server-host-key unset priority system xftp sftp-client algorithm show tacacs set retries(DEPRECATED) tacacs set secret tacacs unset secret telnet-server disable telnet-server enable telnet-server set max-admin-users telnet-server set max-limited-users telnet-server set max-super-users telnet-server show traffic-profiling set port meter-pool traffic-profiling show meter-pool virtual-switch cpu-if set vs tag-vid virtual-switch cpu-if show virtual-switch ethernet add vs port service-vlan-tpid virtual-switch ethernet set port vs service-vlan-tpid virtual-switch l2-cft clear statistics virtual-switch l2-cft disable vs virtual-switch l2-cft enable vs virtual-switch l2-cft l2pt-mac set mac-name mac-addr virtual-switch l2-cft l2pt-mac show virtual-switch l2-cft l2pt-mac unset mac-name virtual-switch l2-cft protocol add vs ctrl-protocol virtual-switch l2-cft protocol add vs disposition virtual-switch l2-cft protocol remove vs ctrl-protocol 39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

CLI fundamentals 2-27 virtual-switch virtual-switch virtual-switch virtual-switch virtual-switch

l2-cft l2-cft l2-cft l2-cft l2-cft

protocol set vs ctrl-protocol protocol set vs disposition set mode set vs priority set vs tunnel-method

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

2-28 CLI fundamentals

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-1

Commands

3-

access-list Access Control Lists Command access-list enable

Access admin

Description Enable ACL functionality

Command access-list disable

Access admin

Description Disable ACL functionality

Command access-list set

Access admin

Description Set global ACL parameters, set attributes of an ACL rule on the specified profile or set the default filter action on the profile The global ACL device mode - default mode is l2-l3-combo

Access admin

Description Unset global ACL parameters or unset an attribute of an ACL rule on the specified profile The global ACL device mode - default mode is l2-l3-combo

Access admin

Description Create an ACL profile ACL profile name

[filter-mode ]

Command access-list unset [filter-mode]

Command access-list create acl-profile

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-2 Commands {default-filter-action }

The default filter action on the profile

Command access-list create acl-augment-action {ingress-capture }

Access super

Description Create an ACL action ACL action name Action for ingress packet capture

Command access-list delete profile <profile>

Access admin

Description Delete an ACL profile ACL profile name

Command access-list delete acl-augment-action

Access super

Description Delete an ACL action ACL action name

Command access-list enable profile <profile>

Access admin

Description Enable an ACL profile ACL profile name

Command access-list disable profile <profile>

Access admin

Description Disable an ACL profile ACL profile name

Command access-list add profile <profile> rule {precedence }

Access admin

Description Add an ACL rule to the specified profile ACL profile name ACL rule name The unique precedence of the rule within the profile: 0 (highest) - 255 (lowest). Note that 255 precedence is reserved for the default rule. The rule filter action

{filter-action }

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-3 [src-mac <MAC address with mask>] [dst-mac <MAC address with mask>] [base-etype <Etype value in hex>] [vtag-stack ..<dei>] [src-ip ] [dst-ip ] [dscp ] [ip-protocol ] [is-fragment ] [l4-src-port ] [l4-dst-port ] [l4-dst-protocol ] [tcp-flags <String List>] [any] [augment-action ] super [none]

Command access-list remove

profile <profile> {rule } {default-filter-action } [precedence ]

TCP flags Any frames Augment Action Qualifying no frame

Access admin

Description Remove a list of ACL rules or all rules from the specified profile ACL profile name ACL rule list or all

Access admin

Description Set an attribute of an ACL rule on the specified profile or the default filter action on the profile ACL profile name The ACL rule name The default filter action on the profile The unique precedence of the rule within the profile: 0 (highest) - 255 (lowest). Note that 255 precedence is reserved for the default rule.

profile <profile> rule

Command access-list set

Source MAC address with mask Destination MAC address with mask EtherType VID/PCP/DEI values IP source address IP destination address DSCP with mask IP protocol type Match fragmented or unfragmented/headfragment packets IP L4 source port - single or range (only in l2l3-combo mode) IP L4 destination port - single or range (only in l2-l3-combo mode) IP L4 destination protocol name

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-4 Commands [filter-action ] [src-mac <MAC address with mask>] [dst-mac <MAC address with mask>] [base-etype <Etype value in hex>] [vtag-stack ..<dei>] [src-ip ] [dst-ip ] [dscp ] [ip-protocol ] [is-fragment ] [l4-src-port ] [l4-dst-port ] [l4-dst-protocol ] [tcp-flags <String List>] [augment-action ] super

The rule filter action Source MAC address with mask Destination MAC address with mask EtherType VID/PCP/DEI values IP source address IP destination address DSCP with mask IP protocol type Match fragmented or unfragmented/headfragment packets IP L4 source port range IP L4 destination port range IP L4 destination protocol name

TCP flags Augment Action

Command access-list set acl-augment-action {ingress-capture}

Access super

Description Set an ACL Augment action ACL action name Action for ingress packet capture

Command access-list unset

Access admin

Description Unset a filter term of an ACL rule on the specified profile ACL profile name ACL rule name Source MAC address with mask Destination MAC address with mask EtherType VID/PCP/DEI values IP source address IP destination address DSCP with mask

profile <profile> rule [src-mac] [dst-mac] [base-etype] [vtag-stack] [src-ip] [dst-ip] [dscp]

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-5 [ip-protocol] [is-fragment]

IP protocol type Match fragmented or unfragmented/headfragment packets IP L4 source port range IP L4 destination port range IP L4 destination protocol name TCP flags Augment Action

[l4-src-port] [l4-dst-port] [l4-dst-protocol] [tcp-flags] [augment-action]

super

Command access-list show

Access limited

[all-augment-actions] [resources]

super

Command access-list show

Access limited

Description Display ACL profile and rule configuration info with optional global/instance statistics (brief and/or active) ACl profile name Statistics list of ports list of VLANs VS name IP Interface name Local or Remote interface All attached interfaces Active rules only (non-zero stats) Summarized output (no filter terms) Attached interfaces

Access super

Description Display ACL Augment action(s) List of ACL action names

profile <profile> [statistics] [port ] [vlan ] [vs ] [ip-interface ] [interface ] [all-instances] [active] [brief] [interfaces]

Command access-list show acl-augment-action

Description Display global ACL configuration and configured profiles or optionally the ACL resource usage or all augment action configured profiles Display all ACL augment actions Display ACL resource usage

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-6 Commands

Command access-list clear profile <profile> {statistics} [port ] [vlan ] [vs ] [ip-interface ] [interface ]

Access admin

Description Clear ACL profile global/instance rule statistics ACl profile name Statistics list of ports list of VLANs VS name IP Interface name Local or Remote interface

Command aggregation add agg {port } {protection-port }

Access admin

Description add ports to an aggregation group aggregation port ports to add to the aggregation protection ports to add to the aggregation

Command aggregation create {agg }

Access admin

Description create an aggregation group aggregation port name

Command aggregation clear {statistics}

Access admin

Description clear agg statistics agg statistics

Command aggregation clear agg {statistics}

Access admin

Description clear statistics aggregation port Agg statistics

aggregation link aggregation

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-7

Command aggregation clear port <port> {statistics}

Access admin

Description clear statistics physical port port LACP statistics

Command aggregation delete agg

Access admin

Description delete an aggregation group aggregation port name

Command aggregation disable

Access admin

Description disable aggregation

Command aggregation enable

Access admin

Description enable aggregation (default)

Command aggregation remove agg {port }

Access admin

Description remove ports from an aggregation group aggregation port ports to remove from the aggregation

Command aggregation set {flood-hash <enhanced | simplified>}

Access admin

Description set aggregation attributes hashing mode for non known unicast frames, default: simplified set marker timeout, default: 50(ms)

Access admin

Description set aggregation group attributes

{marker-timeout <MILLISECONDS: 0-1000>}

Command aggregation set

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-8 Commands agg {admin-key } {hash <mac-addr-based | ip-addr-based | enhanced>} {icl } {min-link-aggregation } {min-link-threshold } {mode } [multi-chassis] {protection-mode <proprietary | standard>}

aggregation port MC-LAG redundancy group admin-key hashing mode for known unicast frames, default: mac-addr-based Inter-chassis link used by MC-LAG set min-link-aggregation mode, default: off set min-link-threshold, default: 1 aggregation mode, default: lacp Convert a LAG to a MC-LAG aggregation protection mode, default: proprietary set revert-delay, LAG default: 5000, MC-LAG default: 300000 set revert-protection, LAG default: off, MC-LAG default: on MC-LAG redundancy group MAC

{revert-delay <MILLISECONDS: 0-720000>} {revert-protection } [system-mac <MAC address: XX:XX:XX:XX:XX:XX>] {system-priority }

set system priority

Command aggregation set port <port> {activity } {agg-mode } {timeout } [cfm-service ]

Access admin

Description set physical port aggregation attributes physical port list set activity mode set aggregation mode, default: lacp set timeout mode CFM service name

Command aggregation switchover

Access admin

Description forced switchover from MC-LAG active node to inactive node MC-LAG port

Access limited

Description show aggregation

agg

Command aggregation show

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-9

Command aggregation show agg {mode}

Access limited

Description show aggregation group information aggregation port to show show aggregation mode

Command aggregation show port <port> {agg-mode}

Access limited

Description show physical port aggregation information physical ports to show aggregation show aggregation mode

Command aggregation show {member} {multi-chassis} {state}

Access limited

Description show aggregation state show aggregation member info show MC-LAG info show aggregation state

Command aggregation unset {flood-hash} {marker-timeout}

Access admin

Description unset aggregation attributes hashing mode for non known unicast frames marker timeout

Command aggregation unset agg {hash} {icl} {min-link-aggregation} {min-link-threshold} {mode} {multi-chassis} {protection-mode} {revert-delay}

Access admin

Description unset aggregation/MC-LAG attributes aggregation port hashing mode Inter-chassis link used by MC-LAG reset min-link-aggregation mode to default reset min-link-threshold to default aggregation mode convert MC-LAG to LAG agg protection mode set revert timeout to default

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-10 Commands {revert-protection} {system-priority}

Command aggregation unset port <port> {activity} {agg-mode} {timeout} {cfm-service}

set revert protection to default set system priority

Access admin

Description set physical port aggregation attributes physical port list set activity mode set aggregation mode set timeout mode disassociate CFM service from a LAG member

Command ais profile create profile <profile> [ais-rdi ] [refresh-timer <SECONDS: 1-20>] [tlv-mode <single-byte | double-byte>] [service-degrade <enable | disable>]

Access admin

Description create an AIS profile AIS profile name ais-rdi set, default: enabled refresh timer for AIS LDI messages, default: 10 ais tlv size mode enable servce degrade capability

Command ais profile delete profile <profile>

Access admin

Description delete an AIS profile AIS profile name

Command ais profile set profile <profile> [ais-rdi ] [refresh-timer <SECONDS: 1-20>] [tlv-mode <single-byte | double-byte>] [service-degrade <enable | disable>]

Access admin

Description set AIS profile parameters AIS profile name ais-rdi set, default: enabled refresh timer for AIS LDI messages, default: 10 ais tlv size mode enable servce degrade capability

ais alarm indication signal (AIS)

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-11

Command ais profile show

Access limited

Description show AIS profile configuration

Command ais profile show profile <profile>

Access limited

Description show a AIS profile AIS profile name

Command ais profile unset profile <profile> [ais-rdi]

Access admin

Description unset AIS profile parameters AIS profile name refresh timer for AIS LDI messages, default: 10, default: enabled refresh, default: active ais tlv size mode service degrade capability

Access limited

Description show ais statistics

[refresh-timer] [tlv-mode] [service-degrade]

Command ais statistics show

Command Access ais statistics show limited {tp-associated <MPLS assoc tp-tunnel>} {static-egress-corout <MPLS egress tp-corouttunnel>} {static-ingress-corout <MPLS ingress tpcorout-tunnel>} {static-transit-corout <MPLS static transit tptunnel>} {static-transit-unidirectional <MPLS static transit unidir tp-tunnel>}

Description show AIS statistics associated tp tunnels egress corouted tunnel list ingress corouted tunnel list transit corouted tunnel list transit unidirectional tunnel list

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-12 Commands

Command ais statistics clear

Access admin

Description clear AIS

Command ais disable

Access admin

Description disable AIS globally

Command ais enable

Access admin

Description enable AIS globally

Command ais show

Access limited

Description show AIS global configuration

Command ais show

Access hidden

Description show AIS

Command alarm acknowledge

Access admin

Description acknowledge all alarms

Command alarm acknowledge alarm-instance-id

Access admin

Description acknowledge alarm(s) alarm instance ID(s)

Command alarm clear {history}

Access admin

Description clear alarm history alarm history log

alarm alarm

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-13

Command alarm delete alarm-instance-id

Access admin

Description delete alarm(s) alarm instance ID(s)

Command alarm disable alarm-table-id

Access admin

Description disable (new) alarm(s) alarm object

Command alarm disable [visible-severity ] [warning-severity]

Access admin

Description disable alarms based on severity disable visual alarms based on severity disable warning severity alarms

Command alarm enable alarm-table-id

Access admin

Description enable (new) alarm(s) alarm object

Command alarm enable [visible-severity ] [warning-severity]

Access admin

Description enable alarms based on severity enable visual alarms based on severity enable warning severity alarms

Command alarm set alarm-table-id {cap } {criticalat } {description <String[25]>} {every }

Access admin

Description set alarm options alarm table object(s) counter cap value critical escalation threshold alarm description counter leak rate (N[yMwdhms]...)

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-14 Commands {leak } {majorat } {minorat } {severity } {threshold } {tocritical } {tomajor } {tominor } {sense } {trigger }

counter leak value major escalation threshold minor escalation threshold alarm severity activation threshold escalation time to critical (N[yMwdhms]...)

Command Access alarm show limited active-alarms {alarm-table-id } {from-date } {from-time } {last } {recent} [severity ] {today} {to-date } {to-time } {yesterday}

Description show active alarm table active alarm table specified alarm table ID only entries from date

Command alarm show defined-alarms [severity ]

Description show defined alarm table alarm table filter by severity

escalation time to major (N[yMwdhms]...) escalation time to minor (N[yMwdhms]...) external alarm sense external alarm trigger

Access limited

entries from time recent entries in the active table recent entries in the active table severity today's entries in the active table entries to date entries to time yesterday's entries in the active table

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-15

Command alarm show alarm-table-id

Access limited

Description show defined alarm details alarm details

Command Access alarm show limited history {alarm-table-id } {from-date } {from-time } {last } {recent} [severity ] {since-activated} {tail } {today} {to-date } {to-time } {yesterday}

Description show alarm history alarm history log specified alarm table ID only entries from date (inclusive)

Command alarm show [statistics] [status] [sense] [forced-alarms]

Access limited

Description show alarm summary statistics status sense forced external alarms

Command alarm unset alarm-table-id {cap}

Access admin

Description unset alarm options alarm table object(s) counter cap value

entries from time (inclusive) recent entries into the history log (N[yMwdhms]...) recent entries into the history log severity from system start or failover latest entries to show today's entries in the history log entries to date (inclusive) entries to time (inclusive) yesterday's entries in the history log

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-16 Commands {criticalat} {description} {every} {leak} {majorat} {minorat} {severity} {threshold} {tocritical} {tomajor} {tominor} {sense} {trigger}

critical escalation threshold alarm description counter leak rate counter leak value major escalation threshold minor escalation threshold alarm severity activation threshold escalation time to critical escalation time to major escalation time to minor external alarm sense external alarm trigger

arp Address Resolution Protocol (ARP) Command Access arp static add admin {destination } {mac <MAC address: XX:XX:XX:XX:XX:XX>} {ip-interface }

Description add new entry destination Host IP Address destination MAC address destination reachable via IP Interface

Command arp static remove {destination } {ip-interface }

Access admin

Description remove existing entry destination host IP Address destination reachable via IP Interface

Command arp static remove-all

Access admin

Description remove all static ARP entries

Command arp static show

Access limited

Description display static ARP entries

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-17

Command arp delete ip

Access admin

Description delete ARP entry IPv4 address

Command arp flush

Access admin

Description flush ARP cache for all interfaces

Command arp flush intf

Access admin

Description flush ARP cache for specified interface Interface to flush

Command arp flush {ip-interface }

Access admin

Description flush ARP cache for specified ip-interface Ip interface to flush

Command arp for ip {interface }

Access limited

Description check if the IP address is in use IPv4 address interface to check

Command arp set {cachetime <SECONDS: 60-3600>}

Access admin

Description set ARP cache options cache timeout in seconds, default: 60 seconds

Command arp show

Access limited

Description show ARP information

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-18 Commands

Command arp show intf

Access limited

Description show ARP information for interface interface to display

Command arp unset {cachetime}

Access admin

Description unset ARP options cache timeout set to default 300 seconds

Command as-path access-list create list-name <list-name>

Access admin

Description create as-path access list as-path access list name

Command as-path access-list delete list-name <list-name>

Access admin

Description delete as-path access list as-path access list name

Command as-path access-list add list-name <list-name> {action } {regexp <String>}

Access admin

Description add as-path access-list name

Command as-path access-list remove list-name <list-name> {action } {regexp <String>}

Access admin

as-path AS Path

regular expression

Description remove access-list entry access-list name regular expression

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-19

Command as-path access-list show

Access limited

Description show as-path access-list

Command as-path access-list show list-name <list-name>

Access limited

Description show as-path access-list as-path access-list name

Command attachment-circuit satop create ac {port } [channel ] [channel-type ] [rtp ]

Access admin

Description create a satop tdm attachment circuit satop tdm attachment circuit name tdm port channel list channel type flag indicating that the rtp header is added

Command attachment-circuit satop set

Access admin

Description change the attributes of the satop tdm attachment circuit satop tdm attachment circuit name flag indicating that the rtp header is added

Access admin

Description change the attributes of the satop tdm attachment circuit satop tdm attachment circuit name set flag indicating that the rtp header is added to default value off

attachment-circuit Attachment circuit

ac [rtp ]

Command attachment-circuit satop unset ac [rtp]

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-20 Commands

Command attachment-circuit satop delete ac

Access admin

Description delete a satop tdm attachment circuit satop tdm attachment circuit name

Command attachment-circuit satop show

Access limited

Description Show all satop tdm attachment circuits

Command attachment-circuit satop show ac

Access limited

Description Show a satop tdm attachment circuit satop tdm attachment circuit name

Command Access attachment-circuit cesop create admin ac {port } {channel } [channel-type ] [master-clock-src ]

[rtp ]

Command attachment-circuit cesop set ac [master-clock-src ]

[rtp ]

Access admin

Description create a cesop tdm attachment circuit cesop tdm attachment circuit name tdm port channel list channel type flag indicating that this circuit will be the master clock source in adaptive clock mode, default is off flag indicating that the rtp header is added

Description change the attributes of the cesop tdm attachment circuit cesop tdm attachment circuit name flag indicating that this circuit will be the master clock source in adaptive clock mod, default is off flag indicating that the rtp header is added

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-21

Command attachment-circuit cesop unset

Access admin

Description change the attributes of the cesop tdm attachment circuit cesop tdm attachment circuit name set flag indicating that this circuit will be the master clock source in adaptive clock mode back to its default value off set flag indicating that the rtp header is added to default value off; only applies to PWE module ports

Command attachment-circuit cesop delete ac

Access admin

Description delete a cesop tdm attachment circuit cesop tdm attachment circuit name

Command attachment-circuit cesop show

Access limited

Description Show all cesop tdm attachment circuits

Command attachment-circuit cesop show ac

Access limited

Description Show a cesop tdm attachment circuit cesop tdm attachment circuit name

ac [master-clock-src]

[rtp]

Command Access attachment-circuit cesop add admin ac {channel }

Description add channel(s) to cesop tdm attachment circuit cesop tdm attachment circuit name list of channels to add

Command attachment-circuit cesop remove

Description remove channel(s) from the cesop tdm attachment circuit cesop tdm attachment circuit name

ac

Access admin

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-22 Commands {channel }

Command attachment-circuit show

list of channels to remove

Access limited

Description show all attachment-circuits currently configured

benchmark benchmark test management Command Access benchmark reflector set admin name {mode } {vendor-type } {mac-validation }

Description set benchmark attributes name of reflector instance to set set service mode, default: in-service

Command benchmark reflector unset name {mode} {vendor-type} {mac-validation}

Access admin

Description unset benchmark attributes name of reflector instance to unset unset the service mode to default of in-service select the generator vendor, default: ciena turn on validation of MAC address(es) on test traffic to reflect

Command benchmark reflector clear name {statistics}

Access admin admin

Description clear reflector statistics name of reflector instance to clear statistics for global counters and entity port statistics

Command benchmark reflector enable

Access admin

Description enable benchmark reflector globally

select the generator vendor, default: ciena turns on or off validation of MAC address(es) for test frames, default: on

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-23 name

name of reflector instance to enable

Command benchmark reflector disable name {all-test-instances}

Access admin

Description disable benchmark reflector globally name of reflector instance to disable disable all test instances for the selected reflector

Command benchmark reflector show

Access limited

Description show summary of all reflector objects

Command benchmark reflector show name {statistics}

Access limited

Description show reflector port information name of reflector instance to clear statistics for show statistics

Command benchmark reflector delete name {all-test-instances}

Access admin

Description delete benchmark test instance(s) name of reflector instance delete all test instances for the selected reflector

Command benchmark generator emix-sequence create name [sequence <String[16]>] [u-frame-size ]

Access admin

Description create a new emix-sequence name of EMIX sequence to create user-defined sequence for new emix-sequence user-defined custom frame size

Command benchmark generator emix-sequence delete name

Access admin

Description delete one of the existing emix sequences name of existing emix-sequence to delete

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-24 Commands

Command benchmark generator emix-sequence set name [sequence <String[16]>] [u-frame-size ]

Access admin

Description change an existing custom emix-sequence name of existing emix-sequence to be set user-defined sequence for this emix-sequence user-defined custom frame size

Command benchmark generator emix-sequence unset name [u-frame-size]

Access admin

Description unset an existing emix-sequence name of existing emix-sequence to be unset user-defined custom frame size

Command benchmark generator emix-sequence show

Access limited

Description show existing emix-sequence(s)

Command benchmark generator emix-sequence show name

Access limited

Description show existing emix-sequence(s) name of existing emix-sequence to be shown in detail

Command benchmark generator kpi-profile create name [pcp ] [untagged] [throughput-min <String[8]>]

Access admin admin admin admin

[frameloss-max <String[8]>]

admin

[latency-max ] [pdv-max ]

admin admin

Description create a new kpi profile user-defined name for new kpi-profile list of PCP(s) which the kpi-profile will use KPIs for the untagged session largest negative deviation from throughput as a percentage of the profile bandwidth for throughput test to pass, valid range 0.0001 99.9999 maximum percentage of frame lost for frame loss test to pass, valid range 0.0001 - 99.9999 maximum latency in ms for latency test to pass maximum delay variation in ms for PDV test to pass

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-25 [single-outage-max ]

admin

maximum duration of a single outage detected in milliseconds maximum duration sum of all outages detected during the test in milliseconds maximum number of outages detected during the test

[sum-outages-max ]

admin

[max-num-outages ]

admin

Command benchmark generator kpi-profile delete name

Access admin

Description delete a kpi profile name of existing kpi-profile to delete

Command benchmark generator kpi-profile set

Access admin

name {pcp } {untagged} [throughput-min <String[8]>]

admin admin admin

[frameloss-max <String[8]>]

admin

[latency-max ] [pdv-max ]

admin admin

[single-outage-max ]

admin

[sum-outages-max ]

admin

[max-num-outages ]

admin

Description set one or more kpi(s) in the specified kpiprofile name of existing kpi-profile to be set list of PCP(s) which the kpi-profile will use KPIs for the untagged session largest negative deviation from throughput as a percentage of the profile bandwidth for throughput test to pass, valid range 0.0001 99.9999 maximum percentage of frame lost for frame loss test to pass, valid range 0.0001 - 99.9999 maximum latency in ms for latency test to pass maximum delay variation in ms for PDV test to pass maximum duration of a single outage detected in milliseconds maximum duration sum of all outages detected during the test in milliseconds maximum number of outages detected during the test

Command benchmark generator kpi-profile show

Access limited

Description show the existing kpi-profile(s)

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-26 Commands

Command benchmark generator kpi-profile show name

Access limited

Description show the existing kpi-profile(s) name of existing kpi-profile to show

Command benchmark generator kpi-profile unset

Access admin

name {pcp } {untagged} [throughput-min]

admin admin admin

[frameloss-max]

admin

[latency-max] [pdv-max]

admin admin

[single-outage-max]

admin

[sum-outages-max]

admin

[max-num-outages]

admin

[all]

admin

Description set one or more kpi(s) in the specified kpiprofile name of existing kpi-profile to be unset list of PCP(s) which the kpi-profile will use KPIs for the untagged session largest negative deviation from throughput as a percentage of the profile bandwidth for throughput test to pass maximum percentage of frame lost for frame loss test to pass maximum latency in ms for latency test to pass maximum delay variation in ms for PDV test to pass maximum duration of a single outage detected in milliseconds maximum duration sum of all outages detected during the test in milliseconds maximum number of outages detected during the test unset all attributes

Command benchmark generator bw-allocation-profile create name

Access admin

Description create a new bandwidth allocation profile

[pcp ]

admin

{bandwidth }

admin

user-defined name for new bandwidth allocation profile list of PCP(s) which the bw allocation profile will use ratio or weight of bandwidth allocation for a particular pcp

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-27

Command benchmark generator bw-allocation-profile delete name

Access admin

Description delete an existing bandwidth allocation profile user-defined bandwidth allocation profile to delete

Command Access benchmark generator bw-allocation-profile set admin name {pcp } admin

Description set the bandwidth allocation of a profile user-defined bandwidth allocation profile to set list of PCP(s) in the bw allocation profile to be set ratio or weight of bandwidth allocation for a particular pcp

{bandwidth }

admin

Command benchmark generator bw-allocation-profile show

Access limited

Description show the existing bandwidth allocation profiles

Command benchmark generator bw-allocation-profile show name

Access limited

Description show the specified bw allocation profile

Command benchmark generator bw-allocation-profile unset name

Access admin

{pcp }

admin

Command

Access

user-defined bandwidth allocation profile to set

Description unset the bandwidth allocation of a profile user-defined bandwidth allocation profile to unset list of PCP(s) in the bw allocation profile to be unset

Description

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-28 Commands benchmark generator delete name {all-test-instances}

admin

delete benchmark test instance(s) name of generator instance delete all test instances for the selected generator

Command benchmark generator stop name {all-test-instances}

Access admin

Description stop benchmark test instance(s) name of generator instance stop all test instances for the selected generator

Command benchmark generator set [kpi-profile ] [emix-sequence ] [bw-allocation-profile ]

Access admin admin admin

Description set some default values for all generators default kpi profile default emix sequence

admin

default bandwidth allocation profile

Command benchmark generator unset [kpi-profile] [emix-sequence] [bw-allocation-profile]

Access admin admin admin admin

Description unset some default values for all generators default kpi profile to unset default emix sequence to unset default bandwidth allocation profile to unset

Command benchmark generator enable name

Access admin

Description enable benchmark generator globally name of generator instance

Command benchmark generator disable name

Access admin

Description disable benchmark generator globally name of generator instance

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-29 {all-test-instances}

disable all test instances for the selected generator

Command benchmark generator clear

Access admin

name {statistics}

admin

Command benchmark generator show

Access limited

Description display global generator info and list of generator instances

Command benchmark generator show name {status} {statistics}

Access limited

Description display details on a generator instance name of generator instance shows test progress for up to 16 test instances shows global counters and statistics of the benchmark FPGA port shows state of emix-sequence under generator entity

{emix-sequence }

Description clear the global counters and the statistics of the benchmark FPGA port for a given generator name of generator instance global counters and the statistics of the benchmark FPGA port

Command Access benchmark generator set admin name {mode } {emix-h-frame-size }

Description set benchmark generator instance attributes name of generator instance to set set service mode, default: in-service

Command

Description

Access

default emix's h frame size for a generator entity

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-30 Commands benchmark generator unset name {mode} {emix-h-frame-size}

admin

unset benchmark generator instance attributes name of generator instance to unset unset the service mode to default of in-service default emix's h frame size for a generator entity

Command benchmark profile configuration set name [bandwidth ] [color-validation ]

Access admin

[duration <15Min | 1Hr | 6Hr | 24Hr | Indefinite | Once>] [emix-sequence ] [excess-bandwidth ] [frameloss-start-bw <profile-bandwidth | maxthroughput>] [frame-size-list ]

admin

Description set benchmark profile attributes profile to configure maximum bandwidth of test traffic in Mbps turn on or off color (C-DEI bit) validation for test packets returning to the generator duration time, default: Once

admin

emix-sequence to be used with this profile

admin admin

[interval <15Min | 1Hr | 2Hr | 6Hr | Completion>] [kpi-profile ]

admin

bandwidth used for the yellow traffic in Mbps bandwidth the frameloss test is to use as a starting point list of packet sizes to be used for tests, default: 64, 128, 256, 512, 1024, 1280, 1518, 9216 interval time, default: Completion

[max-bw-search ]

admin

[max-samples ]

admin

admin admin

admin

admin

[bw-allocation-profile ] [pcp-validation ] admin [sampling-interval ]

admin

[vid-validation ]

admin

kpi-profile to be used to analyze the result of the tests maximum number of searches to do in an attempt to find a successful throughput bandwidth for a given packet size, default: 7 maximum number of samples to take for the latency and PDV tests, default: 20 bandwidth allocation profile to use when testing with this profile turn on or off PCP validation for test packets returning to the generator number of tenths of a second in between samples for the latency and PDV tests, default: 1 turn on or off C-VID validation for test packets returning to the generator

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-31

Command benchmark profile configuration add

Access admin

name [frame-size ]

admin

Command benchmark profile configuration remove

Access admin

name [frame-size ]

admin

Command benchmark profile configuration unset name [bandwidth]

Access admin

[duration] [emix-sequence] [excess-bandwidth] [frameloss-start-bw]

admin admin admin admin

[frame-size-list]

admin

[interval] [kpi-profile]

admin admin

[max-bw-search]

admin

[max-samples]

admin

[bw-allocation-profile]

admin

admin

Description add a frame size to the existing list of frame sizes profile to configure packet size to add to the list of packet sizes used for tests

Description remove a frame size from the list of frame sizes profile to configure packet size to remove from the list of packet sizes used for tests

Description unset benchmark profile attributes profile to configure maximum bandwidth of test traffic in Mbps, default: 1000 duration time, default: Once emix-sequence to be used with this profile excess bandwidth bandwidth the frameloss test is to use as a starting point list of packet sizes to be used for tests, default 64, 128, 256, 512, 1024, 1280, 1518, 9216 interval time, default: Completion kpi-profile to be used to justify the result of this profile maximum number of searches to do in an attempt to find a successful throughput bandwidth for a given packet size, default: 7 maximum number of samples to take for the latency and PDV tests, default: 20 bandwidth allocation profile to use when testing with this profile

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-32 Commands [sampling-interval]

admin

number of tenths of a second in between samples for the latency and PDV tests, default: 1

Command benchmark profile traffic set name [throughput] [latency] [PDV] [frameLoss] [rfc2544]

Access admin

[y1564]

admin

[outage]

admin

Description request benchmark profile traffic tests profile to configure throughput test latency test packet delay variation (PDV) test frame loss measurement test suite of tests that includes throughput, latency, and frame loss concurrent measurement of throughput, frame loss, latency and pdv network outage test

Command benchmark profile traffic unset name [throughput] [latency] [PDV] [frameLoss] [rfc2544]

Access admin

[y1564]

admin

[outage]

admin

Command benchmark profile payload set name [dst-mac <MAC address: XX:XX:XX:XX:XX:XX>] [vlan-encap-type ] [c-vid ] [c-pcp ]

Access admin

admin admin admin admin admin

admin admin admin admin admin

Description unset benchmark profile traffic attributes profile to configure throughput test latency test packet delay variation (PDV) test frame loss measurement test Suite of tests that includes throughput, latency and frame loss concurrent measurement of throughput, frame loss, latency and pdv network outage test

Description set benchmark profile payload attributes profile to configure destination MAC address VLAN encapsulation type - default untagged customer VLAN ID value customer priority code point (PCP) value

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-33 [c-color ] [tpid <0x8100 | 0x9100 | 0x88A8>]

color of test traffic, default green customer tag protocol identifier (TPID) value, default 0x8100 test PDU type, default ethernet custom payload to use with selected PDU type IP source address IP destination address IP DSCP value

[pdu-type <ethernet | ip | udp-echo>] [custom-payload <String>] [ip-src-addr ] [ip-dest-addr ] [ip-dscp ]

Command benchmark profile payload unset name [dst-mac] [vlan-encap-type] [c-vid] [c-pcp] [c-color] [tpid] [pdu-type] [custom-payload] [ip-src-addr] [ip-dest-addr] [ip-dscp]

Access admin

Description unset benchmark profile payload attributes profile to configure destination MAC address VLAN encapsulation type - default untagged customer VLAN ID value customer priority code point (PCP) value color of test traffic, default green customer tag protocol identifier (TPID) value test PDU type, default ethernet custom payload to use with selected PDU type IP source address IP destination address IP DSCP value

Command benchmark profile create name

Access admin

Description create benchmark profile Name of profile instance to create

Command benchmark profile clone name {to }

Access admin

Description clone benchmark profile name of existing profile to clone user-defined name for new profile

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-34 Commands

Command benchmark profile delete name

Access admin

Description delete benchmark profile profile to delete

Command benchmark profile show

Access limited

Description display generator profile information

Command benchmark profile show name

Access limited

Description display generator profile information Show profile information

Command Access benchmark test create admin name {profile } {vtag-stack ..<dei>} {vlan-untagged-data} {dst-mac <MAC address: XX:XX:XX:XX:XX:XX>}

Description create benchmark test instance Name of test instance to create profile to based the test on VLAN stack to test with generate or reflect untagged packets\n Reflector MAX address to test with; override the profile configuration

Command benchmark test delete name

Access admin

Description delete benchmark test instance(s) test instance(s) to delete

Command benchmark test enable name

Access admin

Description enable benchmark test instance(s) test instance to enable

Command

Access

Description

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-35 benchmark test disable name

admin

disable benchmark test instance(s) test instance to disable

Command benchmark test show

Access limited

Description show summary of all benchmark test instance(s) Only show test instances with test results that failed at least one configured KPI Only show test instances with test results that passed all configured KPI(s)

Command benchmark test show name {outage} {frameloss} {latency} {pdv} {statistics} {throughput} {status}

Access limited

Description show details of benchmark test instance(s) test instance(s) to show only show outage test results only show frameloss test results only show latency test results only show pdv test results show test instance statistics and test results only show throughput test results shows test progress for the targetted test instances

Command benchmark test start name

Access admin

Description start benchmark test instance(s) test instance to start

Command benchmark test stop name

Access admin

Description stop benchmark test instance(s) test instance to stop

Command benchmark test clear

Access admin

Description clear test instance(s) results

{kpi-fail} {kpi-pass}

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-36 Commands name {statistics}

Command benchmark test trigger

clear results for given test instance(s) clear test results

Access admin

name {connectivity-test}

Command Access benchmark create admin {reflector} {generator} {name } {port } {mode } {vendor-type } [emix-h-frame-size ] {mac-validation }

Description trigger a connectivity test for the selected benchmark test instance(s) test instance to test connectivy for trigger a connectivity test on the selected profile

Description create a benchmark entity Create a benchmark reflector entity Create a benchmark generator entity name of the entity benchmark port under test set service mode, default: in-service vendor type of the generator node default emix's h frame size for a generator entity turns on or off validation of MAC address(es) for test frames, default: on

Command benchmark delete name

Access admin

Description delete a benchmark entity Benchmark entity to delete

Command benchmark enable

Access admin

Description enable benchmark globally

Command benchmark disable

Access admin

Description disable benchmark globally

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-37

Command benchmark show

Access limited

Description show summary of all created benchmark instances

Command benchmark show name

Access limited

Description show details on benchmark entity Benchmark entity to show

bfd bidirectional forwarding detection (BFD) Command Access bfd profile create admin profile <profile> [receive-interval <3.3msec | 10msec | 20msec | 50msec | 100msec | 300msec | 1sec | 10sec>] [role ] [lsp-gachtype <22 | 7>] [transmit-interval <3.3msec | 10msec | 20msec | 50msec | 100msec | 300msec | 1sec | 10sec>] [hw-acceleration ]

Description create a BFD profile BFD profile name receive interval for BFD packets, default: 100

Command bfd profile delete profile <profile>

Description delete a BFD profile BFD profile name

Access admin

Command Access bfd profile set admin profile <profile> [receive-interval <3.3msec | 10msec | 20msec | 50msec | 100msec | 300msec | 1sec | 10sec>]

role, default: active LSP G-ACh type, default: 22 transmit interval for BFD packets, default: 100

Enable or disable HW acceleration for BFD

Description set BFD profile parameters BFD profile name receive interval for BFD packets, default: 100

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-38 Commands [role ] [lsp-gachtype <22 | 7>] [transmit-interval <3.3msec | 10msec | 20msec | 50msec | 100msec | 300msec | 1sec | 10sec>] [hw-acceleration ]

role, default: active Lsp gachtype, default: 22 transmit interval for BFD packets, default: Disable,. Enable or disable HW acceleration for BFD

Command bfd profile show

Access limited

Description show BFD profile configuration

Command bfd profile show profile <profile>

Access limited

Description show a BFD profile BFD profile name

Command bfd profile unset profile <profile> [receive-interval] [role] [lsp-gachtype] [transmit-interval] [hw-acceleration]

Access admin

Description unset BFD profile parameters BFD profile name receive interval for BFD packets, default: 100 role, default: active Lsp gachtype, default: 22 transmit interval for BFD packets, default: 100 Enable or disable HW acceleration for BFD, default: Disable

Command bfd session clear session <session> {statistics}

Access admin

Description clear BFD session statistics BFD session name total statistics

Command bfd session create session <session>

Access admin

Description create a BFD session BFD session name

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-39 {multihop} {neighbor } {profile <MPLS BFD Profile>} [source ]

enable bfd multihop session next hop IP address BFD profile to be used for this session source IP address

Command bfd session delete session <session>

Access admin

Description delete a BFD session BFD session name

Command bfd session disable session <session>

Access admin

Description disable a BFD session (trigger) BFD session name

Command bfd session enable session <session>

Access admin

Description enable a BFD session (trigger) BFD session name

Command bfd session set session <session> {profile <MPLS BFD Profile>}

Access admin

Description set BFD Session parameters BFD session name profile

Command bfd session show

Access limited

Description show a BFD session

Command bfd session show {all-ip} {all-lsp} {all-vccv}

Access limited

Description show a BFD session list all IP BFD sessions list all LSP BFD sessions list all VCCV BFD sessions

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-40 Commands {neighbor } {oper-down} {oper-up} {admin-enabled} {tunnel} {te-assoc <MPLS assoc te-tunnel>} {tp-assoc <MPLS assoc tp-tunnel>} {tp-egress-corout <MPLS egress tp-corouttunnel>} {tp-ingress-corout <MPLS ingress tp-corouttunnel>} {vc }

next hop IP address list all oper down sessions list all oper up sessions list all admin-enabled sessions tunnel associated te tunnels associated tp tunnels tp egress tunnel list tp ingress tunnel list vc

Command bfd session show session <session> {statistics}

Access limited

Description show a BFD session BFD session name total statistics

Command bfd session unset session <session> {profile}

Access admin

Description unset BFD session parameters to default BFD session name profile

Command bfd disable

Access admin

Description disable BFD globally

Command bfd enable

Access admin

Description enable BFD globally

Command bfd set

Access admin

Description Set BFD global attributes

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-41 [hw-acceleration ]

control HW acceleration capability of LSP BFD sessions for the device, default: no control HW acceleration capability of VCCV BFD sessions for the device, default: yes

[vccv-hw-acceleration ]

Command bfd show

Access limited

Description show BFD global configuration

Command bfd unset [hw-acceleration]

Access admin

Description Unset BFD global attributes to default values control HW acceleration capability of LSP BFD sessions for the device control HW acceleration capability of VCCV BFD sessions for the device

Command bgp neighbor add as {nbr } {remote-as }

Access admin

Description add a BGP neighbor local autonomous system number BGP neighbor neighbor's autonomous system number

Command bgp neighbor remove as {nbr }

Access admin

Description remove a BGP neighbor local autonomous system number BGP neighbor

Command bgp neighbor enable

Access admin

Description enable a BGP neighbor administratively. The default is that a BGP neighbor is added as enabled

[vccv-hw-acceleration]

bgp BGP protocol

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-42 Commands as nbr

autonomous system number BGP neighbor

Command bgp neighbor disable as nbr

Access admin

Description disable a BGP neighbor administratively autonomous system number BGP neighbor

Command bgp neighbor set as {nbr } {activate}

Access admin

Description BGP neighbor set autonomous system number BGP neighbor activate the exchange of specific AF info with neighbor address family identifier subsequent address family identifier

Access admin

Description BGP neighbor unset autonomous system number BGP neighbor activate the exchange of specific AF info with neighbor address family identifier subsequent address family identifier

Access admin

Description add address family autonomous system number address family identifier subsequent address family identifier

{afi } {safi }

Command bgp neighbor unset as {nbr } {activate} {afi } {safi }

Command bgp address-family add as {afi } {safi }

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-43

Command bgp address-family remove as {afi } {safi }

Access admin

Description remove address family autonomous system number address family identifier subsequent address family identifier

Command bgp router-id set as {id }

Access admin

Description set BGP router-id autonomous system number ip address

Command bgp router-id unset as

Access admin

Description unset BGP router-id autonomous system number

Command bgp advertisement-interval set as {nbr } {adv-time <SECONDS: 0-65535>}

Access admin

Description set BGP advertisement interval autonomous system number BGP neighbor advertisement interval in seconds

Command bgp advertisement-interval unset as {nbr }

Access admin

Description unset BGP advertisement interval autonomous system number BGP neighbor

Command bgp connect-retry set as {nbr } {retry-time <SECONDS: 1-65535>}

Access admin

Description set BGP connection retry interval autonomous system number BGP neighbor retry interval in seconds

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-44 Commands

Command bgp connect-retry unset as {nbr }

Access admin

Description unset BGP connection retry interval autonomous system number BGP neighbor

Command bgp description set as {nbr } {desc <String[80]>}

Access admin

Description set BGP neighbor decription autonomous system number BGP neighbor description of neighbor

Command bgp description unset as {nbr }

Access admin

Description unset BGP neighbor description autonomous system number BGP neighbor

Command bgp ebgp-multihop set as {nbr } {hop }

Access admin

Description set ebgp session configuration autonomous system number BGP neighbor hop count

Command bgp ebgp-multihop unset as {nbr }

Access admin

Description unset ebgp session configuration autonomous system number BGP neighbor

Command bgp bfd-monitor enable as

Access admin

Description enable bidirectional forward detection autonomous system number

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-45 nbr [multihop]

BGP neighbor multihop

Command bgp bfd-monitor disable as nbr

Access admin

Description disable bidirectional forward detection autonomous system number BGP neighbor

Command bgp prefix-list add as {nbr } {afi } {safi } {list-name <String[20]>} {dir }

Access admin

Description add prefix list for filtering BGP advertisements autonomous system number BGP neighbor address family identifier subsequent address family identifier prefix list name

Command bgp prefix-list remove

Access admin

Description remove prefix list for filtering BGP advertisement autonomous system number BGP neighbor address family identifier subsequent address family identifier

Access admin

Description set MD5 neighbor authentication autonomous system number BGP neighbor collect password interactively

as {nbr } {afi } {safi } {dir }

Command bgp password set as {nbr } {echoless-password}

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-46 Commands

Command bgp password unset as {nbr }

Access admin

Description unset MD5 neighbor authentication autonomous system number BGP neighbor

Command bgp next-hop-self add

Access admin

Description enable bgp speaker itself as the next-hop. Use clear command to take effect for peer-group autonomous system number BGP neighbor address family identifier subsequent address family identifier

Access admin

Description disable bgp speaker itself as the next hop. Use clear command to take effect for peer-group autonomous system number BGP neighbor address family identifier subsequent address family identifier

Command bgp timers set as nbr {keepalive <SECONDS: 0-65535>} {hold-time <SECONDS: 0-65535>}

Access admin

Description set BGP timers autonomous system number BGP neighbor keepalive, default=30 hold-time, default=90

Command bgp timers unset as nbr

Access admin

Description unset BGP timers autonomous system number BGP neighbor

as {nbr } {afi } {safi }

Command bgp next-hop-self remove as {nbr } {afi } {safi }

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-47

Command bgp frr add as {afi } {safi }

Access admin

Description enable fast reroute autonomous system number address family identifier subsequent address family identifier

Command bgp frr remove as {afi } {safi }

Access admin

Description disable fast reroute autonomous system number address family identifier subsequent address family identifier

Command bgp update-source set as nbr {if-name <String[20]>}

Access admin

Description set interface for TCP connection autonomous system number BGP neighbor name of the interface

Command bgp update-source unset as nbr

Access admin

Description unset interface for TCP connection autonomous system number BGP neighbor

Command bgp update-delay set as {time <SECONDS: 1-3600>}

Access admin

Description set advertisement delay during graceful restart autonomous system number advertisement delay time,default=120

Command

Access

Description

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-48 Commands bgp update-delay unset

admin

unset advertisement delay during graceful restart autonomous system number

Command bgp aggregate-nexthop-check enable

Access admin

Description enable aggregation upon matching next-hop ip address

Command bgp aggregate-nexthop-check disable

Access admin

Description disable aggregation upon matching next-hop ip address

Command bgp aggregate-address add as {afi } {safi } {ipaddress/mask } [as-set] [summary-only]

Access admin

Description add BGP aggregate entry autonomous system number address family identifier subsequent address family identifier ip-address with subnet mask

Command bgp aggregate-address remove as {afi } {safi } {ipaddress/mask }

Access admin

Description remove BGP aggregation entry autonomous system number address family identifier subsequent address family identifier ip-address with subnet mask

Command bgp route-reflector-client add

Access admin

Description set neighbor as client of route reflector. Use clear command to take effect for peer-group

as

autonomous system number prefix advertisement

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-49 as {nbr } {afi } {safi }

Command bgp route-reflector-client remove

autonomous system number BGP neighbor address family identifier subsequent address family identifier

Access admin

Description unset neighbor as client of route reflector. Use clear command to take effect for peer-group autonomous system number BGP neighbor address family identifier subsequent address family identifier

Command bgp client-to-client enable as

Access admin

Description enable router as route reflector autonomous system number

Command bgp client-to-client disable as

Access admin

Description disable router as route reflector autonomous system number

Command bgp cluster-id-index set as {id }

Access admin

Description set cluster id value autonomous system number cluster id value

Command bgp cluster-id-index unset as

Access admin

Description unset cluster id value autonomous system number

as {nbr } {afi } {safi }

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-50 Commands

Command bgp cluster-id-addr set as {addr }

Access admin

Description set cluster id using ip address autonomous system number ip address

Command bgp cluster-id-addr unset as

Access admin

Description unset cluster id using ip address autonomous system number

Command bgp unsuppress-map add as {nbr } {afi } {safi } {name <String[20]>}

Access admin

Description add selective leak of more specific routes autonomous system number BGP neighbor address family identifier subsequent address family identifier route map name

Command bgp unsuppress-map remove as {nbr } [afi ] [safi ]

Access admin

Description remove selective leak of more specific routes autonomous system number BGP neighbor address family identifier subsequent address family identifier

Command bgp graceful-restart enable as

Access admin

Description enable graceful restart autonomous system number

Command bgp graceful-restart disable as

Access admin

Description disable graceful restart autonomous system number

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-51

Command bgp gr-restart-time set as [nbr ] {time <SECONDS: 1-3600>}

Access admin

Description set graceful restart time autonomous system number neighbor ip address restart time,default=90

Command bgp gr-restart-time unset as [nbr ]

Access admin

Description unset graceful restart time autonomous system number neighbor ip address

Command bgp stalepath-time set as {time <SECONDS: 1-3600>}

Access admin

Description set graceful restart stalepath time autonomous system number stalepath time,default=360

Command bgp stalepath-time unset as

Access admin

Description unset graceful restart stalepath time autonomous system number

Command bgp gr-capability add as nbr {afi } {safi }

Access admin

Description add graceful restart capability autonomous system number BGP neighbor address family identifier subsequent address family identifier

Command bgp gr-capability remove as

Access admin

Description remove graceful restart capability autonomous system number

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-52 Commands nbr {afi } {safi }

BGP neighbor address family identifier subsequent address family identifier

Command bgp g-shutdown-capability enable as

Access admin

Description enable graceful shutdown capability autonomous system number

Command bgp g-shutdown-capability disable as

Access admin

Description disable graceful shutdown capability autonomous system number

Command Access bgp g-shutdown-local-preference set admin as {local-preference }

Description set graceful shutdown local preference value autonomous system number local preference value, default = 0

Command bgp g-shutdown-local-preference unset

Access admin

Description unset graceful shutdown local preference value autonomous system number

Command bgp g-shutdown enable as [nbr ]

Access admin

Description enable graceful shutdown autonomous system number neighbor ip address

Command bgp g-shutdown disable as

Access admin

Description disable graceful shutdown autonomous system number

as

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-53 [nbr ]

neighbor ip address

Command bgp g-shutdown-timer set as nbr {time <SECONDS: 10-65535>}

Access admin

Description set graceful shutdown timer autonomous system number BGP neighbor shutdown timer, default = 60sec

Command bgp g-shutdown-timer unset as nbr

Access admin

Description unset graceful restart time autonomous system number BGP neighbor

Command bgp orf add as nbr {afi } {safi } {orf-type <prefix-list>} {dir }

Access admin

Description enable outbound router filtering function autonomous system number BGP neighbor address family identifier subsequent address family identifier outbound router filtering function type direction

Command bgp orf remove as nbr {afi } {safi } {orf-type <prefix-list>} {dir }

Access admin

Description disable outbound router filtering function autonomous system number BGP neighbor address family identifier subsequent address family identifier outbound router filtering function type direction

Command

Access

Description

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-54 Commands bgp add-path set

admin

enable bgp neighbor addtional path. Use clear command to take effect for peer-group autonomous system number BGP neighbor address family identifier subsequent address family identifier capability

Access admin

Description disable bgp neighbor addtional path. Use clear command to take effect for peer-group autonomous system number BGP neighbor address family identifier subsequent address family identifier capability

Command bgp allocate-label set as {all} {route-map <String[20]>}

Access admin

Description set label allocation for bgp routes autonomous system number for all routes for matched routes

Command bgp allocate-label unset as

Access admin

Description unset label allocation for bgp routes autonomous system number

Command bgp redistribute add as {type } [route-map <String[20]>]

Access admin

Description add redistribute routes autonomous system number

as {nbr } {afi } {safi } {capability } {advertise }

Command bgp add-path unset as {nbr } {afi } {safi } {capability} {advertise}

map name

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-55

Command bgp redistribute remove as {type } [route-map]

Access admin

Command bgp network add as {ipaddress/mask } {afi } {safi } [route-map <String[20]>]

Access admin

Command bgp network remove as {ipaddress/mask } {afi } {safi }

Access admin

Command bgp bestpath enable as {aigp-ignore} {compare-routerid}

Access admin

{as-path } {dont-compare-originator-id}

Description remove redistribute routes autonomous system number remove used route map

Description add network autonomous system number ip-address with subnet mask address family identifier subsequent address family identifier map name

Description remove network autonomous system number ip-address with subnet mask address family identifier subsequent address family identifier

Description enable bestpath option autonomous system number ignore aigp, use clear command to take effect always compare routerid, use clear command to take effect ignore as-path length, use clear command to take effect do not compare originator id, use clear command to take effect

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-56 Commands {tie-break-on-age}

tie break on age, use clear command to take effect always compare med, use clear command to take effect

{always-compare-med}

Command bgp bestpath disable as {aigp-ignore} {compare-routerid}

Access admin

Description disable bestpath option autonomous system number ignore aigp, use clear command to take effect always compare routerid, use clear command to take effect ignore as-path length, use clear command to take effect do not compare originator id, use clear command to take effect tie break on age, use clear command to take effect always compare med, use clear command to take effect

Command bgp fast-external-failover enable as

Access admin

Description enable fast external failover autonomous system number

Command bgp fast-external-failover disable as

Access admin

Description disable fast external failover autonomous system number

Command bgp aigp add as nbr {afi } {safi } {med}

Access admin

Description add aigp autonomous system number BGP neighbor address family identifier subsequent address family identifier send aigp value in med

{as-path } {dont-compare-originator-id} {tie-break-on-age} {always-compare-med}

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-57 {cost-community } {poi } [transitive]

send aigp value in cost community point of insertion for bestpath calculation enable transitive cost community

Command bgp aigp remove as nbr {afi } {safi } {med} {cost-community}

Access admin

Description remove aigp autonomous system number BGP neighbor address family identifier subsequent address family identifier send aigp value in med send aigp value in cost community

Command bgp weight add as {nbr } {afi } {safi } {value }

Access admin

Description add a weight value autonomous system number BGP neighbor address family identifier subsequent address family identifier weight value

Command bgp weight remove as {nbr } {afi } {safi }

Access admin

Description remove a weight value autonomous system number BGP neighbor address family identifier subsequent address family identifier

Command bgp lockout set as nbr

Access admin

Description set bgp lockout neighbor autonomous system number BGP neighbor

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-58 Commands

Command bgp lockout unset as nbr

Access admin

Description unset BGP lockout neighbor autonomous system number BGP neighbor

Command bgp route-map add as {nbr } {route-map <String[20]>} {afi } {safi } {in} {out}

Access admin

Description add route-map for BGP neighbor autonomous system number BGP neighbor map name address family identifier subsequent address family identifier route-map inbound add route-map outbound add

Command bgp route-map remove as {nbr } {afi } {safi } {in} {out}

Access admin

Description remove route-map for BGP neighbor autonomous system number BGP neighbor address family identifier subsequent address family identifier route-map inbound remove route-map outbound remove

Command bgp dampening add

Access admin

Description enable BGP route flap dampening and set related parameters autonomous system number address family identifier subsequent address family identifier Reachability half-life time for the penalty in minutes When the penalty for a route exceeds the reuse value, the route becomes unsuppressed

as {afi } {safi } [reach-half-life ] [reuse ]

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-59 {suppress }

When the penalty for a route exceeds the suppress value, the route is suppressed Maximum duration to suppress a stable route in minutes Unreachablity half-life time for the penalty in minutes Route map to specify criteria for dampening

{max-suppress-time } {unreach-half-life } [route-map <String[20]>]

Command bgp dampening remove as {afi } {safi }

Access admin

Description disable BGP route flap dampening autonomous system number address family identifier subsequent address family identifier

Command bgp default-originate set as nbr {afi } {safi } [route-map <String[20]>]

Access admin

Description set default route originate autonomous system number BGP neighbor address family identifier subsequent address family identifier for default route attributes

Command bgp default-originate unset as nbr {afi } {safi }

Access admin

Description unset default route originate autonomous system number BGP neighbor address family identifier subsequent address family identifier

Command bgp create as

Access admin

Description create BGP local autonomous system number

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-60 Commands

Command bgp delete as

Access admin

Description delete BGP instance local autonomous system number

Command bgp enable

Access admin

Description enable BGP instance globally

Command bgp disable

Access admin

Description disable BGP instance globally

Command bgp show [neighbor] [route] [summary] [prefix ] [afi ] {afi } [safi ] {safi } [nbr ] [received] [advertised-routes] {prefix-filter}

Access admin

Description show BGP neighbor BGP route BGP summary specified route address family identifier address family identifier subsequent address family identifier subsequent address family identifier specified neighbor received from neighbor advertise router to neighbor prefix filter

Command bgp show dampening {afi } {safi } {dampened-paths} {flap-statistics}

Access admin

Description show BGP route flap dampening address family identifier subsequent address family identifier dampened paths route flap statistics

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-61 {parameters}

configured parameters

Command bgp clear as [afi ] {afi } [safi ] {safi } [in] [out] [prefix-filter]

Access admin

Description clear local autonomous system number address family identifier address family identifier subsequent address family identifier subsequent address family identifier soft reconfig inbound update soft reconfig outbound update prefix-list ORF and do inbound soft reconfig

Command bgp clear table-map {afi } {safi }

Access admin

Description clear BGP table-map address family identifier subsequent address family identifier

Command bgp clear neighbor [nbr ] [afi ] {afi } [safi ] {safi } [type ] [in] [out] [prefix-filter]

Access admin

Description clear BGP peer BGP neighbor address family identifier address family identifier subsequent address family identifier subsequent address family identifier clear type soft reconfig inbound update soft reconfig outbound update prefix-list ORF and do inbound soft reconfig

Command bgp clear

Access admin

Description clear

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-62 Commands dampening {afi } {safi } [flap-statistics] [prefix ]

BGP route flap dampening address family identifier subsequent address family identifier route flap statistics specified route

blade blade management Command blade show [attributes] [capabilities] [information] [state]

Access limited limited limited limited limited

Description show blade information show board attributes show blade capabilities show blade information show blade state

Command broadcast-containment disable

Access admin

Description disable broadcast containment globally

Command broadcast-containment enable

Access admin

Description enable broadcast containment globally

Command broadcast-containment add filter {port }

Access admin

Description add members to a defined filter filter name ports to add to the filter

Command broadcast-containment create filter

Access admin

Description create a broadcast containment filter filter name

broadcast-containment broadcast containment storm control

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-63 [kbps ] [port ] {containment-classification <String List>}

kilobits per-second to allow ports to add to the filter traffic classes covered by the filter

Command broadcast-containment delete filter

Access admin

Description delete a broadcast containment filter filter name

Command broadcast-containment remove filter {port }

Access admin

Description remove members from a defined filter filter name ports to remove from the filter

Command broadcast-containment set filter [kbps ] [name <String>] {containment-classification <String List>}

Access admin

Description set broadcast containment filter attributes filter name kilobits per-second to allow rename filter traffic classes covered by the filter

Command broadcast-containment set {resource-mode } {ignore-raps-msgs }

Access admin

Description set broadcast containment configuration resource usage mode Ignore R-APS messages when filtering PDUs

Command broadcast-containment show

Access limited

Description show global broadcast-containment filter information

Command

Access

Description

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-64 Commands broadcast-containment show

limited

show detailed broadcast-containment filter information broadcast-containment filter to show

Command broadcast-containment show port <port>

Access limited

Description show port filter membership port list

Command broadcast-containment show vlan

Access limited

Description show vlan filter membership vlan list

Command broadcast-containment show vs

Access limited

Description show virtual-switch filter membership virtual-switch

Command broadcast-containment show

Access limited

Description show filter summary

Access super

Description Create Egress Capture profile Capture profile name Capture duration in seconds, allowed in multiple of 10, default: 0 (Capture All Packets) File name/path for capture Capture file size in KB, default: 1024 Capture maximum number of files, default: 1 Total number of packets to capture, default: 0 (Capture All Packets) File Overwrite functionality, default: yes

filter

capture Capture parameters Command capture create egress-profile <egress-profile> {duration <SECONDS: 0-1800>} {file <String[128]>} {file-size } {max-num-files } {num-of-pkts } {overwrite }

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-65 {pkt-len }

Command capture create ingress-profile {duration <SECONDS: 0-1800>}

Packet length to capture in bytes, default: 64

Access super

Description Create Ingress Capture profile Capture profile name Capture duration in seconds, allowed in multiple of 10, default: 0 (Capture All Packets) File name/path for capture Capture file size in KB, default: 1024 Capture maximum number of files, default: 1 Total number of packets to capture, default: 0 (Capture All Packets) File Overwrite functionality, default: yes Packet length to capture in bytes, default: 64

Access super

Description Create capture files Capture file name which needs to be converted to PCAP file. Input capture file type. Raw format capture file name which needs to be converted to Text format capture file. Option to remove input capture file after successful conversion.

Command capture delete egress-profile <egress-profile>

Access super

Description Delete Egress capture profile Egress Capture profile name

Command capture delete ingress-profile

Access super

Description Delete Ingress capture profile Ingress Capture profile name

{file <String[128]>} {file-size } {max-num-files } {num-of-pkts } {overwrite } {pkt-len }

Command capture create {pcap-file <String[128]>} {input-file-type } {raw-to-text <String[128]>} {remove-input-file }

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-66 Commands

Command capture disable

Access super

Description Disable capture functionality

Command capture disable egress-profile <egress-profile>

Access super

Description Disable Egress capture profile Egress Capture profile name

Command capture disable ingress-profile

Access super

Description Disable Ingress capture profile Ingress Capture profile name

Command capture enable

Access super

Description Enable capture functionality

Command capture enable egress-profile <egress-profile>

Access super

Description Enable Egress capture profile Egress Capture profile name

Command capture enable ingress-profile

Access super

Description Enable Ingress capture profile Ingress Capture profile name

Command capture set egress-profile <egress-profile> {duration <SECONDS: 0-1800>}

Access super

Description Modify Egress Capture profile Egress Capture profile name Capture duration in seconds, allowed in multiple of 10, default: 0 (Capture All Packets) File name/path for capture Capture file size in KB, default: 1024

{file <String[128]>} {file-size }

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-67 {max-num-files } {num-of-pkts }

Capture maximum number of files, default: 1 Total number of packets to capture, default: 0 (Capture All Packets) File Overwrite functionality, default: yes Packet length to capture in bytes, default: 64

{overwrite } {pkt-len }

Command capture set ingress-profile {duration <SECONDS: 0-1800>}

Access super

Description Modify Ingress Capture profile Ingress Capture profile name Capture duration in seconds, allowed in multiple of 10, default: 0 (Capture All Packets) File name/path for capture Capture file size in KB, default: 1024 Capture maximum number of files, default: 1 Total number of packets to capture , default: 0 (Capture All Packets) File Overwrite functionality, default: yes Packet length to capture in bytes, default: 64

Command capture set {cpu-tx-packets }

Access super

Description Set capture for host originated packets. Capture host originated frames.

Command capture show

Access super

Description Display global capture information.

Command capture show egress-profile <egress-profile>

Access super

Description Show Egress capture profile Egress Capture profile name

Command capture show

Access super

Description Show Ingress capture profile

{file <String[128]>} {file-size } {max-num-files } {num-of-pkts } {overwrite } {pkt-len }

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-68 Commands ingress-profile

Command capture unset egress-profile <egress-profile> {duration}

Ingress Capture profile name

Access super

Description Unset Egress Capture profile egress Capture profile name Capture duration in seconds, allowed in multiple of 10, default: 0 Capture file size in KB, default: 1024 Capture maximum number of files, default: 1 Total number of packets to capture, default: 0 File Overwrite functionality, default: yes Packet length to capture in bytes, default: 64

Access super

Description Unset Ingress Capture profile Ingress Capture profile name Capture duration in seconds, allowed in multiple of 10, default: 0 Capture file size in KB, default: 1024 Capture maximum number of files, default: 1 Total number of packets to capture, default: 0 File Overwrite functionality, default: yes Packet length to capture in bytes, default: 64

Access super

Description Unset capture for host originated packets. Capture host originated frames.

Access admin

Description clear delay-measurement statistics

{file-size} {max-num-files} {num-of-pkts} {overwrite} {pkt-len}

Command capture unset ingress-profile {duration} {file-size} {max-num-files} {num-of-pkts} {overwrite} {pkt-len}

Command capture unset {cpu-tx-packets}

cfm cfm Command cfm delay clear

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-69 {statistics}

Command cfm delay clear service <service> [port ] [vlan ] [local-mepid ] {statistics}

Clears the total delay statistics globally, across services and meps.

Access admin

{history}

Description clear delay-measurement statistics cfm service name port VLAN local MEPID Clears the total delay statistics associated with the local mep. Clears the delay history associated with the local mep except the most recent result.

Command Access cfm delay cancel admin service <service> {port } [vlan ] {local-mepid } {mepid } {mac <MAC address: XX:XX:XX:XX:XX:XX>} {test-id }

Description cancel DMM to a Remote MEP service name port VLAN Mepid of the local-mep. Mepid of the remote-mep MAC address of the remote-mep. Test ID

Command cfm delay delete

Access admin

Description delete all delay measurement sessions

Command cfm delay delete service <service> {port } [vlan ] {local-mepid } {mepid }

Access admin

Description delete delay measurement session cfm service port VLAN Mepid of the local-mep. Mepid of the remote-mep.

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-70 Commands {test-id }

Command cfm delay send service <service> {port } [vlan ] {local-mepid } {mepid } {mac <MAC address: XX:XX:XX:XX:XX:XX>} {test-id } {count } {duration <SECONDS: 1-65535>} {dmm-interval <1 | 2 | 3 | 4 | 5 | 6 | 7 | 3.33ms | 10ms | 100ms | 1sec | 10sec | 1min | 10min>} {priority } {repeat-delay <MINUTES>} {iterate } {timeout <MILLISECONDS: 2000-10000>} {frame-size } {delay-threshold <MICROSECONDS: 02147483647>} {jitter-threshold <MICROSECONDS: 02147483647>} {max-delay-threshold <MICROSECONDS: 02147483647>} {max-jitter-threshold <MICROSECONDS: 02147483647>} [accelerate] [non-accelerate] [delay-bins ] [jitter-bins ] [cos-mode] [forward-jitter-bins ]

Test ID

Access admin

Description Initiate a DMM session from the local-mep to the remote-mep. cfm service name port VLAN Mepid of the local-mep. Mepid of the remote-mep. MAC address of the remote-mep. Test ID to identify the session between a local and remote mep pair. Number of DMMs to transmit in an iteration, default: 100 Duration is the amount of time in seconds the test iteration should run DMM transmission interval index or time, default: 100ms DMM message priority, default: 7 Time in minutes between each run of a repeating DMM test Number of times the DMM test has to iterate, default: 1, Continuous test: 0 DMM timeout(ms), default: 5000ms Base CFM Frame size Delay threshold in microseconds Jitter threshold in microseconds Maximum Delay threshold in microseconds Maximum Jitter threshold in microseconds Hardware assisted DMM session Software timestamped DMM session Delay profile name Jitter profile name Substitute DMR p-bits for test-id when TestId TLV is missing Jitter profile name for forward direction

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-71 [backward-jitter-bins ]

Jitter profile name for backward direction

Command cfm delay show [bins] [order-by-mepid] [exclude-evpl] {local-mepid } {mepid } {test-id } {priority } {accelerate}

Access limited limited limited limited

Description show DMM statistics bins counters Order results by MEPID Exclude EVPL interfaces local MEPID remote MEPID Test ID session priority Hardware assisted DMM session

Command cfm delay show service <service> {bins} [order-by-mepid] [exclude-evpl] {local-mepid } {mepid } {priority } {test-id } {history} {accelerate}

Access limited

Description show service DMM statistics service name session bins counters Order results by MEPID Exclude EVPL interfaces Mepid of the local-mep Mepid of the remote-mep DMM message priority Test ID history Hardware assisted DMM session

Command cfm delay-responder create service <service> {port } [vlan ] {local-mepid } {mepid } {accelerate}

Access admin

limited limited

Description create DMM responder service name port VLAN Mepid of the local-mep Mepid of the remote-mep Hardware assisted dmm-responder session

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-72 Commands {non-accelerate}

Software timestamped dmm-responder session Test ID

[test-id ]

Command cfm delay-responder clear service <service> {port } {vlan } {local-mepid } {mepid } [test-id ]

Access admin

Description clear DMM responder service name port VLAN Mepid of the local-mep Mepid of the remote-mep Test ID

Command cfm delay-responder delete service <service> {port } {vlan } {local-mepid } {mepid } [test-id ]

Access admin

Description delete DMM responder service name port VLAN Mepid of the local-mep Mepid of the remote-mep Test ID

Command cfm delay-responder show

Access admin

Description show all delay responder sessions

Command cfm delay-responder show service <service> {local-mepid }

Access admin

Description show DMM responder service name local MEPID

Command cfm frame-loss clear

Access admin

Description clear loss-measurement statistics

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-73 {statistics}

Command cfm frame-loss clear service <service> {port } {vlan } {local-mepid } {statistics}

Clears the total frame-loss statistics globally, across services and meps.

Access admin

{history}

Description clear loss-measurement statistics cfm service name port VLAN local MEPID Clears the total frame-loss statistics associated with the local mep. Clears the frame-loss history associated with the local mep except the most recent result.

Command Access cfm frame-loss cancel admin service <service> {port } {vlan } {local-mepid } {mepid } {mac <MAC address: XX:XX:XX:XX:XX:XX>} {test-id }

Description cancel LMM to a Remote MEP service name port VLAN Mepid of the local-mep. Mepid of the remote-mep MAC address of the remote-mep. Test ID

Command cfm frame-loss delete

Access admin

Description delete all frame loss sessions

Command cfm frame-loss delete service <service> {port } {vlan } {local-mepid } [mepid ]

Access admin

Description delete frame loss session cfm service port VLAN Mepid of the local-mep. Mepid of the remote-mep.

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-74 Commands {test-id }

Command cfm frame-loss send

Test ID

Access admin

Description Initiate a LMM session from the local-mep to the remote-mep. cfm service name port VLAN Mepid of the local-mep. Mepid of the remote-mep. MAC address of the remote-mep. Test ID to identify the session between a local and remote mep pair. Number of LMMs to transmit, default: 100 Duration is the amount of time in seconds the test iteration should run LMM transmission interval index or time, default: 100ms LMM message priority, default: 7 Time in minutes between each run of a repeating LMM test Number of times the LMM test has to iterate, default: 1, Continuous test: 0 LMM timeout(ms), default: 5000ms Frame Loss Near threshold Frame Loss Far threshold Bad Sequence Number error threshold data-traffic priority (0-7, or all), default: 7 Hardware assisted lmm session

Access limited limited limited

Description show LMM statistics Order results by MEPID Exclude EVPL interfaces local MEPID remote MEPID Test ID session priority

service <service> {port } {vlan } {local-mepid } [mepid ] [mac <MAC address: XX:XX:XX:XX:XX:XX>] {test-id } {count } {duration <SECONDS: 1-65535>} {lmm-interval <1 | 2 | 3 | 4 | 5 | 6 | 7 | 3.33ms | 10ms | 100ms | 1sec | 10sec | 1min | 10min>} {priority } {repeat-delay <MINUTES>} {iterate } {timeout <MILLISECONDS: 2000-10000>} {fln-threshold } {flf-threshold } {seq-threshold } {data-priority <0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | all>} [accelerate]

Command cfm frame-loss show [order-by-mepid] [exclude-evpl] {local-mepid } {mepid } {test-id } {priority }

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-75 {accelerate}

Hardware assisted lmm session

Command cfm frame-loss show service <service> [order-by-mepid] [exclude-evpl] {local-mepid } {mepid } {test-id } {priority } {history} {history-with-counters}

Access limited

Command cfm frame-loss-responder create service <service> {port } {vlan } {local-mepid } {mepid } [test-id ] {accelerate} {data-priority <0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | all>}

Access admin

Description create LMM responder service name port VLAN Mepid of the local-mep Mepid of the remote-mep Test ID Hardware assisted lmm-responder session Data-traffic priority (0-7, or all), default:7

Command cfm frame-loss-responder clear service <service> {port } {vlan } {local-mepid } {mepid } [test-id ]

Access admin

Description clear LMM responder service name port VLAN Mepid of the local-mep Mepid of the remote-mep Test ID

limited limited

Description show service LMM statistics service name Order results by MEPID Exclude EVPL interfaces Mepid of the local-mep Mepid of the remote-mep Test ID session priority history history with counters

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-76 Commands

Command cfm frame-loss-responder delete service <service> {port } {vlan } {local-mepid } {mepid } [test-id ]

Access admin

Description delete LMM responder service name port VLAN Mepid of the local-mep Mepid of the remote-mep Test ID

Command cfm frame-loss-responder show {accelerate} {local-mepid } {mepid } {test-id }

Access admin

Description show all frame loss responder sessions Hardware assisted session local MEPID remote MEPID Test ID

Command cfm frame-loss-responder show service <service> {accelerate} {local-mepid } {mepid } {test-id }

Access admin

Description show LMM responder service name Hardware assisted session local MEPID remote MEPID Test ID

Command cfm synthetic-loss clear {statistics}

Access admin

Description clear synthetic loss-measurement statistics Clears the total synthetic-loss statistics globally, across services and meps.

Command cfm synthetic-loss clear service <service> {port }

Access admin

Description clear synthetic loss-measurement statistics cfm service port

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-77 {vlan } {local-mepid } {statistics}

VLAN local MEPID Clears the total synthetic-loss statistics associated with the local mep. Clears the synthetic-loss history associated with the local mep except the most recent result.

{history}

Command cfm synthetic-loss cancel service <service> {port } {vlan } {local-mepid } {mepid } {test-id }

Access admin

Description cancel SLM to a Remote MEP service name port VLAN local MEPID remote MEPID Test ID

Command cfm synthetic-loss delete

Access admin

Description delete all synthetic loss-measurement sessions

Command cfm synthetic-loss delete service <service> {port } {vlan } {local-mepid } {mepid } {test-id }

Access admin

Description delete synthetic loss-measurement session cfm service port VLAN local MEPID remote MEPID Test ID

Command cfm synthetic-loss send service <service> {port }

Access admin

Description send SLM to a Remote MEP service name port

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-78 Commands {vlan } {local-mepid } {mepid } {test-id } {count } {duration <SECONDS: 1-65535>}

VLAN local MEPID remote MEPID Test ID, default: 1 Number of SLMs to transmit, default: 100 Duration is the amount of time in seconds the test iteration should run SLM transmission interval index or time, default: 100ms SLM message priority, default: 7 SLM message Drop Eligibility Indicator, default: 0 Time in minutes between each run of a repeating LMM test Number of times the SLM test has to iterate, default: 1, Continuous test: 0 SLM timeout(ms), default: 5000ms Base CFM Frame size Frame Loss Near threshold Frame Loss Far threshold Signal Degrade clear threshold Signal Degrade set threshold Hardware assisted SLM session

{slm-interval <1 | 2 | 3 | 4 | 5 | 6 | 7 | 3.33ms | 10ms | 100ms | 1sec | 10sec | 1min | 10min>} {priority } {drop-eligibility } {repeat-delay <MINUTES>} {iterate } {timeout <MILLISECONDS: 2000-10000>} {frame-size } {fln-threshold } {flf-threshold } {sd-clear-threshold } {sd-set-threshold } {accelerate}

Command cfm synthetic-loss show [order-by-mepid] [exclude-evpl] {local-mepid } {mepid } {test-id } {priority } {accelerate}

Access limited limited limited

Description show SLM sessions Order results by MEPID Exclude EVPL interfaces local MEPID remote MEPID Test ID session priority Hardware assisted SLM session

Command cfm synthetic-loss show service <service> [order-by-mepid]

Access limited

Description show service SLM session service name Order results by MEPID

limited

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-79 [exclude-evpl] {local-mepid } {mepid } {test-id } {priority } {history} {history-with-counters} {accelerate}

limited

Exclude EVPL interfaces local MEPID remote MEPID Test ID session priority history history with counters Hardware assisted SLM session

Command cfm synthetic-loss-responder create service <service> {port } {vlan } {local-mepid } {mepid } [test-id ] [accelerate]

Access admin

Description create SLM responder service name port VLAN Mepid of the local-mep Mepid of the remote-mep Test ID Hardware assisted synthetic-loss responder session

Command cfm synthetic-loss-responder clear service <service> {port } {vlan } {local-mepid } {mepid } [test-id ]

Access admin

Description clear SLM responder service name port VLAN Mepid of the local-mep Mepid of the remote-mep Test ID

Command cfm synthetic-loss-responder delete service <service> {port } {vlan } {local-mepid } {mepid }

Access admin

Description delete SLM responder service name port VLAN Mepid of the local-mep Mepid of the remote-mep

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-80 Commands [test-id ]

Test ID

Command cfm synthetic-loss-responder show {accelerate} {local-mepid } {mepid } {test-id }

Access admin

Description show synthetic loss responder sessions Hardware assisted session local MEPID remote MEPID Test ID

Command cfm synthetic-loss-responder show service <service> {accelerate} {local-mepid } {mepid } {test-id }

Access admin

Description show synthetic loss responder sessions service name Hardware assisted session local MEPID remote MEPID Test ID

Command cfm linktrace clear {statistics}

Access admin

Description clear linktrace information statistics table

Command cfm linktrace clear service <service> {port } {mepid } {statistics} {vlan }

Access admin

Description clear linktrace information cfm service port MEPID statistics VLAN

Command cfm linktrace send service <service>

Access admin

Description send LTM to a Remote MEP service name

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-81 {port } {local-mepid } {mepid } {ttl } {priority } {fdb-only} [vlan ]

port local MEPID remote MEPID Initial LTM TTL value, default: 64 LTM message priority, default: 7 Set LTM useFDBonly flag vlan

Command Access cfm linktrace send-mac admin service <service> {port } {local-mepid } {mac <MAC address: XX:XX:XX:XX:XX:XX>} {ttl } {priority } {fdb-only} [vlan ]

Description send LTM to a MAC address service name port local MEPID MAC address Initial LTM TTL value, default: 1 LTM message priority, default: 7 Set LTM useFDBonly flag VLAN

Command cfm linktrace show [order-by-mepid] [exclude-evpl]

Access limited limited limited

Description show LTRs Order results by MEPID Exclude EVPL interfaces

Command cfm linktrace show service <service> {port } {mepid } {vlan }

Access limited

Description show LTRs for last LTM service name port MEPID VLAN

Command cfm loopback clear {statistics}

Access admin

Description clear loopback statistics statistics

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-82 Commands

Command cfm loopback clear service <service> {port } {mepid } {statistics} {vlan }

Access admin

Description clear loopback statistics cfm service port local MEPID statistics VLAN

Command cfm loopback send service <service> {port } [vlan ] {local-mepid } {mepid } {count } {priority } {data <String[128]>} {interval <MILLISECONDS: 10-60000>} {timeout <MILLISECONDS: 2000-10000>}

Access admin

Description send LBM to a Remote MEP service name port VLAN local MEPID remote MEPID Number of LBMs to transmit, default:1 LBM message priority, default: 7 LBM extra data LBM interval(ms), default: 100 LBM timeout(ms), default: 5000

Command Access cfm loopback send-mac admin service <service> {port } [vlan ] {local-mepid } {mac <MAC address: XX:XX:XX:XX:XX:XX>} {count } {priority } {data <String>} {interval <MILLISECONDS: 10-60000>} {timeout <MILLISECONDS: 2000-10000>}

Description send LBM to a MAC service name port VLAN local MEPID MAC address Number of LBMs to transmit, default:1 LBM message priority, default: 7 LBM extra data LBM interval(ms), default: 100 LBM timeout(ms), default: 5000

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-83

Command cfm loopback show [order-by-mepid] [exclude-evpl]

Access limited limited limited

Description show LBM statistics Order results by MEPID Exclude EVPL interfaces

Command cfm loopback show service <service> [order-by-mepid] [exclude-evpl]

Access limited

Description show service LBM statistics service name Order results by MEPID Exclude EVPL interfaces

Command cfm md create md <md> {level } {md-name-format <none | dns | mac-int | string>} {md-name-mac-addr <MAC address: XX:XX:XX:XX:XX:XX>} {md-name-integer } {md-name-string <String[43]>}

Access admin

Command cfm md delete md <md>

Access admin

Description delete Maintenance Domain attributes Maintenance Domain

Command cfm md set level {name <String[43]>} {md-name-format <none | dns | mac-int | string>} {md-name-mac-addr <MAC address: XX:XX:XX:XX:XX:XX>}

Access admin

Description set Maintenance Domain attributes Maintenance Domain level Maintenance Domain administrative name Maintenance Domain Name Format

limited limited

Description create a Maintenance Domain Maintenance Domain administrative name Maintenance Domain level Maintenance Domain Name Format MAC address xx:xx:xx:xx:xx:xx for the MD name 2-octet integer for the MD name Maintenance Domain name string

MAC address xx:xx:xx:xx:xx:xx for the MD name

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-84 Commands {md-name-integer } {md-name-string <String[43]>}

2-octet integer for MD name Maintenance Domain name string

Command cfm md set md <md> {level } {name <String[43]>} {md-name-format <none | dns | mac-int | string>} {md-name-mac-addr <MAC address: XX:XX:XX:XX:XX:XX>} {md-name-integer } {md-name-string <String[43]>}

Access admin

Command cfm md unset level {name} {md-name-format} {md-name-mac-addr}

Access admin

Description set Maintenance Domain attributes Maintenance Domain level Maintenance Domain administrative name Maintenance Domain Name Format MAC address xx:xx:xx:xx:xx:xx for the MD name 2-octet integer for MD name Maintenance Domain name string

Access admin

Description set Maintenance Domain attributes Maintenance Domain Maintenance Domain level Maintenance Domain administrative name Maintenance Domain Name Format MAC address xx:xx:xx:xx:xx:xx for the MD name 2-octet integer for MD name Maintenance Domain name string

MAC address xx:xx:xx:xx:xx:xx for the MD name 2-octet integer for MD name Maintenance Domain name string

{md-name-integer} {md-name-string}

Command cfm md unset md <md> {level} {name} {md-name-format} {md-name-mac-addr} {md-name-integer} {md-name-string}

Description set Maintenance Domain attributes Maintenance Domain Maintenance Domain level Maintenance Domain administrative name Maintenance Domain Name Format

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-85

Command cfm md show level {services}

Access limited

Description show Maintenance Domain information Maintenance Domain level show service information

Command cfm md show md <md> {services}

Access limited

Description show Maintenance Domain information Maintenance Domain show service information

Command cfm md show

Access limited

Description show all Maintenance Domains

Command cfm mep clear {statistics}

Access admin

Description clear stats statistics

Command cfm mep clear service <service> {port } {vlan } {mepid } {statistics}

Access admin

Description clear stats service name port VLAN MEPID statistics

Command cfm mep create service <service> port <port> {vlan } {type }

Access admin

Description create a MEP service name service port VLAN MEP type

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-86 Commands {mepid } {member-port }

MEPID port

Command cfm mep delete service <service> {port } {vlan } {mepid }

Access admin

Description delete a MEP service name port VLAN MEPID

Command cfm mep disable service <service> {port } {vlan } {mepid }

Access admin

Description disable a MEP service name port VLAN MEPID

Command cfm mep enable service <service> {port } {vlan } {mepid }

Access admin

Description enable a MEP service name port VLAN MEPID

Command cfm mep set service <service> {port } {vlan } {local-mepid } {block-opposite-fault-threshold } {block-opposite-fault-time <MINUTES>} {ccm-comment <String[32]>} {ccm-priority }

Access admin

Description set MEP attributes service name port VLAN local MEPID Frame threshold for generating fault, default: 0 Frame sampling time in minutes, default: 5 CCM Comment CCM message priority, default: 7

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-87 {ccm-state } {csf-priority } {csf-state } {mepid } {sd-monitoring } {sd-trigger-mode } {tag-mode } {tag-vid } {tag-priority } {transparency-state }

CCM Tx state, default: on CSF message priority, default: 7 CSF State, default: on MEPID Set Signal Degrade monitoring Signal Degrade trigger mode Additional VLAN tag mode Additional VLAN tag vid Additional VLAN tag priority MEP is transparent to frame MD levels less than or equal to transparency-md-level, default: off MEP transparency applies to frames at this MD level and below, default: 0 MEP type, default: down

{transparency-md-level } {type }

Command cfm mep unset service <service> {port } {vlan } {local-mepid } {ccm-comment}

Access admin

Description unset MEP attributes service name port VLAN MEPID CCM Comment

Command cfm mep show [order-by-mepid] [exclude-evpl] [sd-monitoring-on]

Access limited limited limited limited

Description show MEPs Order results by MEPID Exclude EVPL interfaces filter by signal degrade monitoring ON state

Command cfm mep show service <service> {port } {vlan } {mepid }

Access limited

Description show MEP information service name port vlan MEPID

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-88 Commands {agent}

retrieve from agent

Command cfm mip clear service <service> port <port> {statistics}

Access admin

Description clear MIP service name service port statistics

Command cfm mip create vlan port <port> {level }

Access admin

Description create MIP VLAN or list of VLANs including VID 0 port MD level

Command cfm mip create vs {level } {port } {vlan }

Access admin

Description create CFM service virtual switch MD level port VLAN or list of VLANs including VID 0

Command cfm mip delete vlan port <port> {level }

Access admin

Description delete a MIP VLAN or list of VLANs including VID 0 port MD level

Command cfm mip delete vs {level } {port }

Access admin

Description delete a MIP virtual switch MD level port

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-89 {vlan }

VLAN or list of VLANs including VID 0

Command cfm mip show {order-by-interface}

Access limited limited

Description show MIPs Order results by interface

Command cfm mip show vlan port <port> {level }

Access limited

Description show MIP information VLAN or list of VLANs including VID 0 port MD level

Command cfm mip show vs {level } {port } {vlan }

Access limited

Description show MIP information virtual switch MD level port VLAN or list of VLANs including VID 0

Command cfm mip-ccm-db disable

Access admin

Description disable MIP CCM database learning

Command cfm mip-ccm-db enable

Access admin

Description enable MIP CCM database learning

Command cfm mip-ccm-db show

Access limited

Description show all MIP CCM database records

Command

Access

Description

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-90 Commands cfm mip-ccm-db show

limited

show MIP CCM database records for a service network VLAN

Command cfm profile bins create delay <delay>

Access admin

Description Create bins profile delay profile

Command cfm profile bins create jitter <jitter>

Access admin

Description Create bins profile jitter profile

Command cfm profile bins create delay-range <delay-range>

Access admin

Description Create bins profile delay range profile

Command cfm profile bins delete delay <delay>

Access admin

Description Delete bins profile delay profile

Command cfm profile bins delete jitter <jitter>

Access admin

Description Delete bins profile jitter profile

Command cfm profile bins delete delay-range <delay-range>

Access admin

Description Delete bins profile delay range profile

Command

Access

Description

vlan

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-91 cfm profile bins set delay <delay> {bin-index } {threshold }

admin

set bins profile delay profile bin index Threshold value must be greater than the value of the preceding bin

Command cfm profile bins set jitter <jitter> {bin-index } {threshold }

Access admin

Description set bins profile jitter profile bin index Threshold value must be greater than the value of the preceding bin

Command cfm profile bins set delay-range <delay-range> {bin-index } {threshold }

Access admin

Description set bins profile delay range profile bin index Threshold value must be greater than the value of the preceding bin

Command cfm profile bins show

Access admin

Description show bins profile

Command cfm profile bins show delay <delay>

Access admin

Description show bins profile delay profile

Command cfm profile bins show jitter <jitter>

Access admin

Description show bins profile jitter profile

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-92 Commands

Command cfm profile bins show delay-range <delay-range>

Access admin

Description show delay-range profile delay range profile

Command cfm profile bins unset delay <delay> {bin-index }

Access admin

Description unset bins profile delay profile bin index 1..10

Command cfm profile bins unset jitter <jitter> {bin-index }

Access admin

Description unset bins profile jitter profile bin index 1..10

Command cfm profile bins unset delay-range <delay-range> {bin-index }

Access admin

Description unset bins profile delay range profile bin index 1..10

Command cfm profile threshold create loss

Access admin

Description Create threshold profile loss threshold profile

Command cfm profile threshold create delay <delay>

Access admin

Description Create threshold profile delay threshold profile

Command cfm profile threshold delete

Access admin

Description Delete threshold profile

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-93 loss

Command cfm profile threshold delete delay <delay>

loss threshold profile

Access admin

Description Delete threshold profile delay threshold profile

Command Access cfm profile threshold set admin loss {forward-maximum-flr <MILLIPERCENT>} {forward-average-flr <MILLIPERCENT>} {backward-maximum-flr <MILLIPERCENT>} {backward-average-flr <MILLIPERCENT>} {avail-forward-high-loss } {avail-forward-consecutive-high-loss } {avail-backward-high-loss } {avail-backward-consecutive-high-loss } {avail-forward-unavailable-count } {avail-backward-unavailable-count } {avail-forward-available-ratio <MILLIPERCENT>} {avail-backward-available-ratio <MILLIPERCENT>}

Description set threshold profile loss threshold profile forward maximum flr, default:100000 forward average flr, default:100000 backward maximum flr, default:100000 backward average flr, default:100000 availability forward high loss, default:4294967295 availability forward consecutive high loss, default:4294967295 availability backward high loss, default:4294967295 availability backward consecutive high loss, default:4294967295 availability forward unavailable count, default:4294967295 availability backward unavailable count, default:4294967295 availability forward available ratio, default:0

Command cfm profile threshold set delay <delay> {forward-maximum-ifdv } {forward-average-ifdv }

Description set threshold profile delay threshold profile forward maximum ifdv in microseconds, default:4294967295 forward average ifdv in microseconds, default:4294967295

Access admin

availability backward available ratio, default:0

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-94 Commands {backward-maximum-ifdv } {backward-average-ifdv } {two-way-maximum-fd } {two-way-average-fd } {two-way-maximum-ifdv } {two-way-average-ifdv } {two-way-maximum-fdr } {two-way-average-fdr }

backward maximum ifdv in microseconds, default:4294967295 backward average ifdv in microseconds, default:4294967295 two way maximum fd in microseconds, default:4294967295 two way average fd in microseconds, default:4294967295 two way maximum ifdv in microseconds, default:4294967295 two way average ifdv in microseconds, default:4294967295 two way maximum fdr in microseconds, default:4294967295 two way average fdr in microseconds, default:4294967295

Command cfm profile threshold show

Access admin

Description show threshold profile

Command cfm profile threshold show loss

Access admin

Description show threshold profile loss threshold profile

Command cfm profile threshold show delay <delay>

Access admin

Description show threshold profile delay threshold profile

Command cfm profile threshold unset loss {forward-maximum-flr} {forward-average-flr} {backward-maximum-flr} {backward-average-flr}

Access admin

Description unset threshold profile loss threshold profile forward maximum flr forward average flr backward maximum flr backward average flr

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-95 {avail-forward-high-loss} {avail-forward-consecutive-high-loss} {avail-backward-high-loss} {avail-backward-consecutive-high-loss} {avail-forward-unavailable-count} {avail-backward-unavailable-count} {avail-forward-available-ratio} {avail-backward-available-ratio}

availability-forward-high-loss availability-forward-consecutive-high-loss availability-backward-high-loss availability-backward-consecutive-high-loss availability-forward-unavailable-count availability-backward-unavailable-count availability-forward-available-ratio availability-backward-available-ratio

Command cfm profile threshold unset delay <delay> {forward-maximum-ifdv} {forward-average-ifdv} {backward-maximum-ifdv} {backward-average-ifdv} {two-way-maximum-fd} {two-way-average-fd} {two-way-maximum-ifdv} {two-way-average-ifdv} {two-way-maximum-fdr} {two-way-average-fdr}

Access admin

Description unset threshold profile delay threshold profile forward maximum ifdv forward average ifdv backward maximum ifdv backward average ifdv two way maximum fd two way average fd two way maximum ifdv two way average ifdv two way maximum fdr two way average fdr

Command cfm remote-mep clear {statistics}

Access admin

Description clear Remote MEP statistics statistics

Command cfm remote-mep clear service <service> mepid <mepid> {statistics}

Access admin

Description clear Remote MEP statistics service name Remote MEP MEPID statistics

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-96 Commands

Command cfm remote-mep create service <service> mepid <mepid>

Access admin

Description create Remote MEP service name Remote MEP MEPID

Command cfm remote-mep delete

Access admin

Description delete Remote MEP

Command cfm remote-mep delete service <service> mepid <mepid>

Access admin

Description delete Remote MEP service name Remote MEP MEPID

Command cfm remote-mep disable service <service> mepid <mepid>

Access admin

Description disable Remote MEP service name Remote MEP MEPID

Command cfm remote-mep enable service <service> mepid <mepid>

Access admin

Description enable Remote MEP service name Remote MEP MEPID

Command Access cfm remote-mep set admin service <service> mepid <mepid> {hold-state <enable | disable | lock>} {mac <MAC address: XX:XX:XX:XX:XX:XX>} {cvid }

Description set Remote MEP attributes service name Remote MEP MEPID hold after enabled until stable MAC address customer vid

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-97

Command cfm remote-mep show {y1731}

Access limited

Description show Remote MEPs Y.1731 Information

Command cfm remote-mep show service <service> mepid <mepid>

Access limited

Description show Remote MEP information service name Remote MEP MEPID

Command cfm remote-mep unset service <service> mepid <mepid> {mac} {cvid}

Access admin

Description Unset service name Remote MEP MEPID MAC address customer vid

Command cfm service clear {statistics}

Access admin

Description clear Remote MEP statistics statistics

Command cfm service clear service <service> {statistics}

Access admin

Description Clear statistics of all CFM services service name statistics

Command cfm service create static-backup-pbt <static-backup-pbt> [accelerate] [level ]

Access admin

Description create CFM service PBB-TE tunnel service Hardware assisted service MD level

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-98 Commands {ma-name-format } {ma-name-integer } {ma-name-string <String[45]>} {ma-name-vid } {ma-name-vpn-oui } {ma-name-vpn-index } {md } {name <String[45]>} [next-mepid ]

Short MA Name Format 2-octet integer for Short MA Name Short MA Name Character String Short MA Name Primary VID Short MA Name VPN OUI Short MA Name VPN Index Maintenance Domain CFM service name initialize next-mepid

Command Access cfm service create admin static-pbt <static-pbt> [accelerate] [level ] {ma-name-format } {ma-name-integer } {ma-name-string <String[45]>} {ma-name-vid } {ma-name-vpn-oui } {ma-name-vpn-index } {md } {name <String[45]>} [next-mepid ]

Description create CFM service PBB-TE tunnel service Hardware assisted service MD level Short MA Name Format

Command Access cfm service create admin vlan [accelerate] {default-mep-type } [level ] {ma-name-format } {ma-name-integer }

Description create CFM service VLAN(s) service Hardware assisted service Default type for MEPs MD level Short MA Name Format

2-octet integer for Short MA Name Short MA Name Character String Short MA Name Primary VID Short MA Name VPN OUI Short MA Name VPN Index Maintenance Domain CFM service name initialize next-mepid

2-octet integer for Short MA Name

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-99 {ma-name-string <String[45]>} {ma-name-vid } {ma-name-vpn-oui } {ma-name-vpn-index } {md } {name <String[45]>} [next-mepid ]

Short MA Name Character String Short MA Name Primary VID Short MA Name VPN OUI Short MA Name VPN Index Maintenance Domain CFM service name initialize next-mepid

Command Access cfm service create admin vs [accelerate] {default-mep-type } [level ] {ma-name-format } {ma-name-integer } {ma-name-string <String[45]>} {ma-name-vid } {ma-name-vpn-oui } {ma-name-vpn-index } {md } {name <String[45]>} [next-mepid ]

Description create CFM service virtual switch service Hardware assisted service Default type for MEPs MD level Short MA Name Format

Command cfm service delete service <service>

Access admin

Description delete a CFM service service name

Command cfm service disable service <service>

Access admin

Description disable a CFM service service name

2-octet integer for Short MA Name Short MA Name Character String Short MA Name Primary VID Short MA Name VPN OUI Short MA Name VPN Index Maintenance Domain CFM service name initialize next-mepid

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-100 Commands

Command cfm service enable service <service>

Access admin

Description enable a CFM service service name

Command cfm service set service <service> {accelerate} {alarm-priority } {alarm-time <MILLISECONDS: 0-36000>}

Access admin

Description set a CFM Service attributes service name Hardware assisted CFM service fault alarm priority, default: 3 service fault alarm time in milliseconds, default: 3000 CCM transmission interval index or time, default: 1sec

{ccm-interval <0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | off | 3.33ms | 10ms | 100ms | 1sec | 10sec | 1min | 10min>} {csf-interval <1 | 2 | 3 | 4 | 5 | 6 | 7 | 3.33ms | 10ms | 100ms | 1sec | 10sec | 1min | 10min>} {csf-loss-num } {csf-dci-num } {ccm-loss-bucket-size <MINUTES>} {ccm-loss-num } {ccm-loss-stats <enable | disable>} {level } {ma-name-format } {ma-name-integer } {ma-name-string <String[45]>} {ma-name-vid } {ma-name-vpn-oui } {ma-name-vpn-index } {md } {name <String[45]>} {next-mepid } {reset-time <MILLISECONDS: 10-36000>} {remote-mep-aging-time <MILLISECONDS: 03600000>} {remote-mep-discovery <enable | disable>}

CSF transmission interval index or time, default: 1sec CSF loss number, default: 3 CSF Dci number, default: 3 CCM loss bucket size in minutes, default: 15 CCM loss number, default: 3 CCM Loss Statistics per Remote MEP, default: disable MD level, default: 3 Short MA Name Format 2-octet integer for Short MA Name Short MA Name Character String Short MA Name Primary VID, default: 0 Short MA Name VPN OUI, default: first 3 octets of the chassis MAC Short MA Name VPN Index, default: 0 Maintenance Domain CFM service name MEPID of next MEP created service fault reset time remote mep aging time, default: 0 (disabled) automatically discover remote MEPs

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-101 {sender-id-type <none | chassis | manage | chassis-manage>}

Sender ID TLV type

Command cfm service unset service <service> {accelerate}

Access admin

Description unset CFM service service name HW assisted CFM

Command cfm service show

Access limited

Description show CFM services

Command cfm service show service <service> {mep} {remote-mep} {statistics}

Access limited

Description show CFM service information service name show service MEPs show service Remote MEPs Global CFM Statistics

Command cfm signal-degrade synthetic-loss show service <service>

Access limited

Description show Signal Degrade SLM session service name used for signal degrade monitoring local MEPID where SD monitoring is on remote MEPID Test ID history

Access limited limited

Description show stacks on all ports in all service networks Order results by interface

{local-mepid } {mepid } {test-id } {history}

Command cfm stack show {order-by-interface}

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-102 Commands

Command cfm stack show vlan {order-by-interface}

Access limited

Command cfm mef delay create

Access admin

service <service> {local-mepid } {remote-mepid } {mac <MAC address: XX:XX:XX:XX:XX:XX>} {test-id }

{session-type } {message-interval <3.33ms | 10ms | 100ms | 1sec | 10sec | 1min | 10min>} {measurement-interval <MINUTES>}

{priority } {repetition-time <MINUTES>}

{start-now} {start-at-time } {start-at-date } {start-after } {stop-none} {stop-at-time } {stop-at-date } {stop-after } {align-measurement-interval} {align-measurement-offset <MINUTES>}

limited

Description show stacks on all ports in a service network VLAN Order results by interface

Description Initiate a DMM session from the local-mep to the remote-mep. cfm service name Mepid of the local-mep. Mepid of the remote-mep. MAC address of the remote-mep. Test ID to identify the session between a local and remote mep pair. If not specified, it will be equal to session ID. Delay session type, default: proactive DMM transmission interval time, default: 100ms Amount of time in minutes the test iteration should run, default: 15min(Proactive), 5min(on-demand). DMM message priority, default: 7 Time in minutes between start of first Measurement Interval and start of the next measurement interval. Starts session immediately. Fixed mode: Starts session at input time. Fixed mode: Starts session at input date. Relative mode: Starts session in input time from now. Session runs forever. Fixed mode: Stops session at input time. Fixed mode: Stops session at input date. Relative mode: Stops session in input time from start-time. Aligns session with a zero offset to real time. Offset in minutes from the time of day value.

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-103 {stored-interval-count }

Number of completed Measurement Intervals to be stored in the history statistic table, default:32 Base CFM Frame size Hardware assisted DMM session Delay profile name Delay Range profile name

{frame-size } [accelerate] {delay-bins } {delay-range-bins } {ifdv-bins } {forward-ifdv-bins } {backward-ifdv-bins } {threshold-profile } {cos-mode}

Jitter profile name Jitter profile name for forward direction Jitter profile name for backward direction Delay Threshold Profile name Substitute DMR p-bits for test-id when TestId TLV is missing

Command cfm mef delay delete service <service> {local-mepid } {session-id }

Access admin

Description delete delay measurement session service name Mepid of the local-mep. Session ID

Command cfm mef delay disable service <service> {local-mepid } {session-id }

Access admin

Description cancel DM session service name Mepid of the local-mep. Session ID

Command cfm mef delay show [bins]

Access limited limited

Description show DMM statistics bins counters

Command cfm mef delay show

Access limited

Description show service DMM statistics

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-104 Commands service <service> {local-mepid } {session-id } {history} {history-id } {bins}

Command cfm mef synthetic-loss availability show service <service> {local-mepid } {session-id } {history}

service name Mepid of the local-mep Session ID Complete history for a unique test session. History for a unique measurement interval. session bins counters

Access limited

Description show service availability statistics service name Mepid of the local-mep Session ID Complete availability history for a unique test session. Availability history for a unique measurement interval.

Access admin

Description Initiate a SLM session from the local-mep to the remote-mep. cfm service name Mepid of the local-mep. Mepid of the remote-mep. MAC address of the remote-mep. Test ID to identify the session between a local and remote mep pair. If not specified, it will be equal to session ID. Delay session type, default: proactive SLM transmission interval time, default: 1sec

{history-id }

Command cfm mef synthetic-loss create service <service> {local-mepid } {remote-mepid } {mac <MAC address: XX:XX:XX:XX:XX:XX>} {test-id }

{session-type } {message-interval <3.33ms | 10ms | 100ms | 1sec | 10sec | 1min | 10min>} {measurement-interval <MINUTES>}

{priority } {repetition-time <MINUTES>}

{start-now}

Amount of time in minutes the test iteration should run, default: 15min(Proactive), 5min(on-demand). SLM message priority, default: 7 Time in minutes between start of first measurement interval and start of the next measurement interval. Starts session immediately.

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-105 {start-at-time } {start-at-date } {start-after } {stop-none} {stop-at-time } {stop-at-date } {stop-after } {align-measurement-interval} {align-measurement-offset <MINUTES>} {stored-interval-count }

Fixed mode: Starts session at input time. Fixed mode: Starts session at input date. Relative mode: Starts session in input time from now. Session runs forever. Fixed mode: Stops session at input time. Fixed mode: Stops session at input date. Relative mode: Stops session in input time from start-time. Aligns session with a zero offset to real time. Offset in minutes from the time of day value. Number of completed Measurement Intervals to be stored in the history statistic table, default:32 Base CFM Frame size Hardware assisted SLM session Specifies the availability Measurement Interval, default:15 Number of SLM PDUs transmitted during each 'delta_t' period, default:10 Threshold used in evaluating the availability/ unavailability status of each delta_t. Units:millipercent default:50000 Number of consecutive availability indicators used to determine a change in availability status, default:10 Number of consecutive availability indicators used for assessing CHLI, default:5 Loss Threshold Profile name

{frame-size } [accelerate] {avail-measurement-interval <MINUTES>} {avail-consecutive-pdu-count } {avail-flr-threshold <MILLIPERCENT>}

{avail-consecutive-intervals } {avail-consecutive-high-flr } {threshold-profile }

Command cfm mef synthetic-loss delete service <service> {local-mepid } {session-id }

Access admin

Description delete synthetic-loss measurement session service name Mepid of the local-mep. Session ID

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-106 Commands

Command cfm mef synthetic-loss disable service <service> {local-mepid } {session-id }

Access admin

Description cancel SLM session service name Mepid of the local-mep. Session ID

Command cfm mef synthetic-loss show

Access limited

Description show SLM statistics

Command cfm mef synthetic-loss show service <service> {local-mepid } {session-id } {history} {history-id }

Access limited

Description show service SLM statistics service name Mepid of the local-mep Session ID Complete history for a unique test session. History for a unique measurement interval.

Command cfm mef session show service <service> {local-mepid } {test-type <delay | synthetic-loss>}

Access limited

Description lists all existing legacy and mef sessions service name Mepid of the local-mep test session type

Command cfm clear {statistics}

Access admin

Description clear CFM statistics statistics

Command cfm disable

Access admin

Description disable CFM globally

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-107

Command cfm enable

Access admin

Command Access cfm set admin {dot1ad-strict } {ethertype } {l2-loop-detect } {dmm-default-count } {dmm-default-interval <1 | 2 | 3 | 4 | 5 | 6 | 7 | 3.33ms | 10ms | 100ms | 1sec | 10sec | 1min | 10min>} {dmm-default-timeout <MILLISECONDS: 2000-10000>} {lmm-default-count } {lmm-default-interval <1 | 2 | 3 | 4 | 5 | 6 | 7 | 3.33ms | 10ms | 100ms | 1sec | 10sec | 1min | 10min>} {lmm-default-timeout <MILLISECONDS: 200010000>} {lbm-default-count } {lbm-default-interval <MILLISECONDS: 1060000>} {lbm-default-timeout <MILLISECONDS: 200010000>} {slm-default-count } {slm-default-interval <2 | 3 | 4 | 5 | 6 | 7 | 10ms | 100ms | 1sec | 10sec | 1min | 10min>} {slm-default-timeout <MILLISECONDS: 200010000>} {mip-level-enforcement } {rmep-hold-time <MILLISECONDS: 10300000>} {vs-automatic-meps } {y1731ethertype } {slm-responder-aging }

Description enable CFM globally

Description set CFM attributes Strict 802.1ad compliance, default: on ethernet type, default: 35074 (0x8902) L2 Loop Detection, default: off default DMM count, default: 100 default DMM interval(ms), default: 100ms

default DMM timeout(ms), default: 5000ms default LMM count, default: 100 default LMM interval(ms), default: 100ms

default LMM timeout(ms), default: 5000ms default LBM count, default: 1 default LBM interval(ms), default: 100ms default LBM timeout(ms), default: 5000ms default SLM count, default: 100 default SLM interval(ms), default: 100ms default SLM timeout(ms), default: 5000ms MIP MD Level enforcement, default: on remote MEP hold time, default: 10000 Automatic UNI Up MEP creation, default: on y.1731 ethernet type, default: 35074 (0x8902) Enable Implicit SLM Responder Aging, default: off

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-108 Commands

Command cfm unset {dot1ad-strict} {ethertype} {l2-loop-detect} {dmm-default-count} {dmm-default-interval} {dmm-default-timeout} {lmm-default-count} {lmm-default-interval} {lmm-default-timeout} {lbm-default-count} {lbm-default-interval} {lbm-default-timeout} {slm-default-count} {slm-default-interval} {slm-default-timeout} {mip-level-enforcement} {rmep-hold-time} {vs-automatic-meps} {y1731ethertype}

Access admin

Description unset CFM attributes Strict 802.1ad compliance, default: on ethernet type, default: 35074 (0x8902) L2 Loop Detection default DMM count, default: 100 default DMM interval(ms), default: 100ms default DMM timeout(ms), default: 5000ms default LMM count, default: 100 default LMM interval(ms), default: 100ms default LMM timeout(ms), default: 5000ms default LBM count, default: 1 default LBM interval(ms), default: 100ms default LBM timeout(ms), default: 5000ms default SLM count, default: 100 default SLM interval(ms), default: 100ms default SLM timeout(ms), default: 5000ms MIP MD Level enforcement, default: on remote MEP hold time, default: 10000 Automatic UNI Up MEP creation, default: on y.1731 ethernet type, default: 35074 (0x8902)

Command cfm show {port} {hardware-resources} {statistics}

Access limited

Description show CFM information CFM port capabilities CFM hardware resources Global CFM Statistics

Access admin

Description disable dying-gasp

chassis chassis management Command chassis dying-gasp disable

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-109

Command chassis dying-gasp enable

Access admin

Description enable dying-gasp

Command chassis dying-gasp set [informs ]

Access admin

Description set dying-gasp settings when on send informs if the target server is configured for informs

Command chassis dying-gasp show

Access limited

Description show dying-gasp settings

Command chassis post clear

Access admin

Description clear POST errors

Command chassis post disable

Access admin

Description disable POST

Command chassis post enable

Access admin

Description enable POST

Command chassis post show

Access limited

Description show POST status

Command chassis port-led-mirror create map {led <1 | 2 | 3 | 4>} {port <9 | 10>}

Access admin

Description create led-map led-map led port

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

3-110 Commands

Command chassis port-led-mirror delete map

Access admin

Description delete led-map led-map

Command chassis port-led-mirror show

Access limited

Description show led-map configuration

Command chassis system-rsvd-port add

Access admin

Description reserve a port for system use for the specified feature port to reserve feature to be associated with this port

Command chassis system-rsvd-port remove {port }

Access admin

Description unreserve a port for a system feature port to unreserve

Command chassis system-rsvd-port show [feature <enhanced-cfm | oam-services | vctransform | vpls-irb>]

Access limited

Description show port(s) reserved for system features feature to query

Command chassis force-reset

Access admin

Description force reset the device

Command chassis reboot

Access limited

Description reboot this device

{port } {feature <enhanced-cfm | oam-services | vctransform | vpls-irb>}

39XX/51XX Service Delivery, Aggregation and Virtualization Switches Command Reference SAOS 6.18 009-3297-010 Standard Revision A Copyright© 2019 Ciena® Corporation January 2019

Commands 3-111 show

show scheduled reboot

Command chassis reboot [cancel] [cold-start]

Access admin admin admin

[now]

admin

Command chassis reboot delay <delay> [nopost]

Access admin

Command chassis reboot nopost [now]

Access admin

Command chassis reboot time