122761800-ericsson-field-guide-for-utran.pdf

Volume II – Ericsson Field Guide for UTRAN P3: Feature Parameters and Best Practices Network Services Document: ND-00150

Rev. 3.0 09/09/2007

Overview Volume II of the Ericsson Field Guide for UTRAN defines AT&T’s accepted practices for optimization of the Radio Access portion of the UMTS network for Ericsson WRAN P5MD patch level P5.0.14 (Phase II FOA exited August 23rd, 2007). The algorithms by which subscriber devices interact with the network are described in detail. Recommendations are provided that produce the best performance in the network for each type of interaction. This Field Guide is composed of 11 sections which include descriptions of: • New features released in the most recent RNS software version. • WCDMA design concepts and measurement fundamentals. • A chronological step by step description of how the subscriber device and network interact. Idle Mode, Call Establishment and Connected Mode are introduced and the algorithms associated with each are described and the involved parameters are explained. • OSS access procedures and methods.

The document concludes with an index and tables wherein all configurable parameters and supporting details are listed along with a list of well deserved credits.

IMPORTANT: This document is the result of an ongoing collaborative effort between AT&T Market, Regional, National and Ericsson staff and management. It will continue to be updated with the latest findings in the areas of optimization and vendor improvement through the use of Field Studies and successive vendor software and hardware updates.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 1 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Contents 1.

About This Document....................................................................................................................... 8 1.1 Purpose ....................................................................................................................................... 8 1.2 Scope .......................................................................................................................................... 8 1.3 Audience ..................................................................................................................................... 8 1.4 Related Documentation............................................................................................................... 8 1.5 Acronyms and Terms .................................................................................................................. 8 1.6 Trademarks ................................................................................................................................. 8 1.7 Conventions ................................................................................................................................ 8 1.8 Contacts ...................................................................................................................................... 9

2.

New Features in P3 (WRAN P5MD Phase II)................................................................................ 10 2.1 Idle Mode................................................................................................................................... 10 2.1.1 URA_PCH......................................................................................................................... 10 2.1.2 Introduciton of CELL_FACH State for HS capable UEs................................................... 10 2.2 Call Establishment .................................................................................................................... 10 2.2.1 2xPS Radio Access Bearers............................................................................................. 10 2.2.2 Enhanced Uplink (EUL) or HSUPA................................................................................... 10 2.3 Mobility and Connection Management...................................................................................... 10 2.3.1 Introduction of additional R99 RABs................................................................................. 10 2.3.2 Event 6a has been replaced with Event 6d ...................................................................... 11 2.3.3 Code Division Multiplexing for HSDPA............................................................................. 11 2.3.4 hoTypeDrncBand1-17 has been replaced with defaultHoType........................................ 11 2.3.5 Calculation of maxDlPowerCapability............................................................................... 11 2.3.6 Throughput triggered Dedicated to Dedicated Up and Down-Switch (Uplink and Downlink) .......................................................................................................................... 11 2.4 OSS Related Functionality ........................................................................................................ 11 2.4.1 Neighbor List Prioritization................................................................................................ 11

3.

Significant KPI Impact Parameters ................................................................................................ 12 3.1 Accessibility............................................................................................................................... 12 3.2 Retainability............................................................................................................................... 12 3.3 Quality ....................................................................................................................................... 12 3.4 Throughput and Latency ........................................................................................................... 12

4.

Design Criteria ............................................................................................................................... 13 4.1 UE Capabilities.......................................................................................................................... 13

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 2 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

4.1.1 Frequency Bands.............................................................................................................. 13 4.1.2 Channel Numbering Scheme (UARFCN) ......................................................................... 13 4.1.3 Power Classes .................................................................................................................. 14 4.1.4 UE Category (HSDPA and EUL) ...................................................................................... 15 4.2 Link Budget ............................................................................................................................... 16 4.3 Basic Design Requirements...................................................................................................... 17 4.3.1 Pilot Pollution .................................................................................................................... 17 4.3.2 Neighbor List Determination ............................................................................................. 17 4.3.3 Scrambling Code Usage................................................................................................... 18 4.4 Measurement Fundamentals .................................................................................................... 18 4.4.1 PCPICH ............................................................................................................................ 18 4.4.2 PCPICH RSCP ................................................................................................................. 19 4.4.3 CPICH Ec/No (Ec/Io) ........................................................................................................ 19 4.4.4 Eb/No ................................................................................................................................ 20 4.4.5 SIR .................................................................................................................................... 20 4.4.6 RSSI.................................................................................................................................. 20 4.4.7 RTWP ............................................................................................................................... 20 4.4.8 BLER................................................................................................................................. 21 5.

Parameters Described Within Context........................................................................................... 22 5.1 Idle Mode................................................................................................................................... 22 5.1.1 Cell Search Procedure...................................................................................................... 22 5.1.2 PLMN Selection ................................................................................................................ 23 5.1.3 IMSI and GPRS Attach ..................................................................................................... 28 5.1.4 Location and Routing Area Updates................................................................................. 34 5.2 Call Establishment .................................................................................................................... 35 5.2.1 Radio Access Bearer ........................................................................................................ 35 5.2.2 Mobile Origination / Termination....................................................................................... 37 5.3 Mobility and Connection Management...................................................................................... 51 5.3.1 Measurement Fundamentals ............................................................................................ 51 5.3.2 Cell Reselection in Idle Mode or CELL_FACH ................................................................. 52 5.3.3 Handover in Connected Mode (CELL_DCH) – Intra-Frequency ...................................... 53 5.3.4 Handover in Connected Mode (CELL_DCH) – Inter-Frequency or Inter-RAT ................. 58 5.3.5 HS Cell Change ................................................................................................................ 70 5.3.6 Channel Switching ............................................................................................................ 71 5.3.7 HSDPA Scheduling........................................................................................................... 86

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 3 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.8 EUL Scheduling ................................................................................................................ 87 5.3.9 Congestion Detection and Resolution .............................................................................. 88 5.3.10 Radio Connection Supervision ......................................................................................... 91 5.3.11 Downlink and Uplink Power Control ................................................................................. 91 6.

OSS Overview................................................................................................................................ 98 6.1 Configuration Management....................................................................................................... 99 6.1.1 Configuration Access Procedures .................................................................................... 99 6.1.2 Configuration Methods...................................................................................................... 99 6.2 Performance Management...................................................................................................... 100 6.2.1 Performance Access Procedures ................................................................................... 100 6.2.2 Ericsson Counter Types ................................................................................................. 101 6.2.3 Call Trace Capability....................................................................................................... 101 6.3 Fault Management .................................................................................................................. 102 6.3.1 Alarm Status Matrix ........................................................................................................ 102 6.3.2 Alarm List Viewer ............................................................................................................ 102 6.3.3 Alarm Log Browser ......................................................................................................... 102

7.

Counter and Recording Activation ............................................................................................... 103 7.1 Counter Activation................................................................................................................... 103 7.1.1 Table Definitions ............................................................................................................. 103 7.1.2 Subscription Profiles ....................................................................................................... 103 7.2 Recording Activation ............................................................................................................... 144 7.2.1 Activation of RES Recording to support Scorecard Data ............................................... 144

8.

Reference Documents ................................................................................................................. 145

9.

Parameter Reference................................................................................................................... 146

10. Consulted List .............................................................................................................................. 159 11. Index............................................................................................................................................. 166

Figures Figure 1: Figure 2: Figure 3: Figure 4: Figure 5: Figure 6: Figure 7: Figure 8:

Slot and Frame Structure....................................................................................................... 22 Power Ramping on RACH ..................................................................................................... 29 RRC Connection Signaling Flow ........................................................................................... 30 Downlink DPCCH Power ....................................................................................................... 32 Admission Control (Radio Link Request)............................................................................... 40 Admission Control (DL Channelization)................................................................................. 41 Admission Control (Spreading Factor Usage) ....................................................................... 43 Admission Control (DL Power) .............................................................................................. 44

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 4 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Figure 9: Admission Control (Uplink ASE Utilization) ........................................................................... 46 Figure 10: Admission Control (Downlink ASE Utilization)..................................................................... 47 Figure 11: Admission Control (Uplink Hardware Utilization)................................................................. 48 Figure 12: Admission Control (Downlink Hardware Utilization) ............................................................ 49 Figure 13: Event 1a Trigger .................................................................................................................. 54 Figure 14: Event 1b Trigger .................................................................................................................. 55 Figure 15: Event 1c Trigger................................................................................................................... 56 Figure 16: Event 1d Trigger .................................................................................................................. 57 Figure 17: Event 2d Trigger (Begin Compressed Mode) ...................................................................... 59 Figure 18: Event 2f Trigger (Cease Compressed Mode)...................................................................... 60 Figure 19: Event 6d Trigger (Begin Compressed Mode) ...................................................................... 61 Figure 20: Event 6b Trigger (Cease Compressed Mode)..................................................................... 62 Figure 21: Event 3a (EcNo)................................................................................................................... 64 Figure 22: Event 3a (RSCP) ................................................................................................................. 65 Figure 23: Event 3a (UE Tx) ................................................................................................................. 66 Figure 24: Event 2b (EcNo)................................................................................................................... 67 Figure 25: Event 2b (RSCP) ................................................................................................................. 68 Figure 26: Event 2b (UE Tx) ................................................................................................................. 69 Figure 27: Event 1d HS (HS Cell Change) ........................................................................................... 70 Figure 28: Dedicated (DCH/DCH) to Common Down-Switch............................................................... 73 Figure 29: HS (DCH/HS or EUL/HS) to Common Down-Switch........................................................... 74 Figure 30: Common to Dedicated (DCH/DCH, DCH/HS or EUL/HS) Up-Switch ................................. 75 Figure 31: Common to URA_PCH Down-Switch .................................................................................. 76 Figure 32: URA_PCH to Idle Mode Down-Switch................................................................................. 77 Figure 33: Throughput triggered DCH to DCH Down-Switch (Downlink) ............................................. 78 Figure 34: Throughput triggered DCH to DCH Down-Switch (Uplink) .................................................. 79 Figure 35: Code Power check for Up-Switch (Downlink)...................................................................... 80 Figure 36: Code Power check for Up-Switch (Downlink)...................................................................... 81 Figure 37: Throughput Triggered Up-Switch (Uplink) ........................................................................... 82 Figure 38: Covered Triggered Ded. to Ded. Down-Switch ................................................................... 83 Figure 39: Throughput Triggered Down-Switch (Multi-RAB) ................................................................ 84 Figure 40: Throughput Triggered Up-Switch (Multi-RAB)..................................................................... 85 Figure 41: Throughput Triggered Down-Switch (2xPSMulti-RAB)........................................................ 86 Figure 42: Congestion Detection (Downlink) ........................................................................................ 89 Figure 43: Congestion Detection (Uplink) ............................................................................................. 90 Figure 44: OSS Connectivity................................................................................................................. 98

Tables Table 1: Operating Bands ..................................................................................................................... 13 Table 2: UARFCN List for Bands II and V (“Additional Channels” method) ......................................... 14 Table 3: UE Power Classes .................................................................................................................. 15

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 5 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Table 4: UE Categories (HSDPA)......................................................................................................... 15 Table 5: UE Categories (EUL) .............................................................................................................. 16 Table 6: Link Budget ............................................................................................................................. 16 Table 6: Master Information Block (MIB) Contents ............................................................................... 24 Table 7: System Information Block 1 (SIB 1) Contents ........................................................................ 24 Table 8: System Information Block 3 (SIB 3) ........................................................................................ 25 Table 9: System Information Block 5 (SIB 5) ........................................................................................ 25 Table 10: System Information Block 7 (SIB 7) ...................................................................................... 26 Table 11: System Information Block 11 (SIB 11) .................................................................................. 26 Table 12: System Information Block 12 (SIB 12) .................................................................................. 27 Table 13: Air Speech Equivalents (ASE) .............................................................................................. 44 Table 14: Maximum Bit Rates per Radio Link....................................................................................... 92 Table 15: UeRc, RAB and UeRcTrCh Identification ............................................................................. 95 Table 16: blerQualityTarget values ....................................................................................................... 96 Table 17: Configuration Management Access Procedures .................................................................. 99 Table 18: Counter Activation............................................................................................................... 105 Table 19: Configurable Parameter Lookup Table ............................................................................... 146

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 6 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Document Revision History This table identifies content revisions made to this document. Date

Rev

Revision Description

Writer

Sponsor

11/01/2005

1.0

Release version

Michael Noah

Adnan Naqvi

11/28/2005

1.1

Updates to “Cingular Recommended” parameter values based upon Field Optimization.

Michael Noah

Greg Scharosch

05/01/2006

2.0

Updates based upon Cingular P2 (Ericsson P5ED) FOA as well as results from Field Studies

Michael Noah

Greg Scharosch

01/25/2007

2.1

Content extended – version not published.

Michael Noah

Greg Scharosch

03/30/2007

2.2

Moved to new AT&T template. Incorporated all existing Field Guide Alerts.

Michael Noah

Greg Scharosch

09/09/2007

3.0

Updated for AT&T P3 Phase II (Ericsson P5MD P5.0.14)

Michael Noah

Somesh Razdan

RACI This table identifies RACI team members. Accountable

Responsible

Somesh Razdan

Michael Noah

Consulted

Informed

Market Engineering

Mike Pietropola

Regional Engineering

Eric Parker

Regional OSS Support

Adnan Naqvi

National Field Support

John Dapper

Strategic Planning National Quality Ericsson Support For details see Consulted_List

Copyright © 2007 AT&T Mobility LLC. All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the written permission of the publisher.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 7 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

1. About This Document This section includes information about this document.

1.1

Purpose

The primary intention of this document is to serve as a common point of understanding and reference. This volume includes recommendations for all configurable RNC and Node B parameters. The recommendations made within this document are the result of collaborative efforts between all groups involved (see 1.3).

1.2

Scope

This document is mainly based upon Ericsson’s UTRAN implementation, focusing on the interaction between the User Equipment and UTRAN. For completeness, some facets of the Core Network are included, e.g. Paging, Routing and Location Area Update procedures, i.e. non-access stratum.

1.3

Audience

The audience for this document includes AT&T Market, Region and National Engineers and Technicians responsible for Ericsson UTRAN Optimization and Maintenance.

1.4

Related Documentation

See Reference Documents Chapter.

1.5

Acronyms and Terms

All acronyms and terms are fully spelled out within the document.

1.6

Trademarks

The trademarks used in this document are the property of their respective owners.

1.7

Conventions

The following conventions are used throughout this document: • The term “call” refers to any type of user plane connection between UE and the Core Network. It is not specific to voice or data - UE originated or terminated. It specifically does not include any type of signaling used to support the communication of user information.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 8 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 • The term “function” refers to Ericsson’s implementation of a certain portion of the 3GPP specification. A function is limited to satisfying a specific action taken by either the network or UE. For example, the process of originating a call is referred to as a function. Once the call has been originated, handing the call over is considered a function and ending the call is a function. Within this document, parameters are explained relative to the functions they support. • Each Operator Configurable Parameter expressed in bolditalic. Brackets enclose the Configurable Parameter’s Level (RNC, Cell, etc.), AT&T Default Value, Units and Class (Policy, Rule, Fixed, Variable). • Each Operator Configurable Paramter exists within a specifi Managed Opject Class (MOC). The Managed Object Class will be specified only for parameters that exist within multiple Managed Object Classes. For example, qOffset1sn is a parameter that can be set differently for Intra-Frequency (UtranRelation) and Inter-RAT (GsmRelation) neighbors. The parameter instances are therefore denoted as qOffset1sn(UtranRelation) [Nabr, 0, dB, Fixed] and qOffset1sn(GsmRelation) [Nabr, 7, dB, Fixed]. • All references to Radio Access Bearers (RABs) are denoted as UL/DL where UL is the Uplink RLC Data rate in kilobits per second and DL is the Downlink Data rate in kilobits per second. • The term “R99” is used to denote all CELL_DCH Radio Access Bearers referring to the release of the specification that only supported Dedicated Channels (DCH). The term DCH/HS is used to denote HSDPA capability where the Uplink uses an R99 Radio Access Bearer. The terms EUL/HS or HSPA is used to denote the HSUPA / HSDPA capability. • Some configurable parameters include an “(sho)” or an “(hho)” suffix. This suffix is used to specify a subset of cells to which the parameter recommendation applies. The sho vs. hho distinction is as follows: • (hho). The parameter recommendation is specific to UEs that might have no alternative to performing a Hard Inter-RAT or Inter-Frequency Handover in order to maintain the call. • (sho). The parameter recommendation is specific to cells that have Intra-Frequency overlap with other 3G cells. Inter-RAT or Inter-Frequency Hard Handover is not normally needed to maintain the call. • For example, usedFreqThresh2dRscp(hho) [Cell, -106 ±4, dBm, Fixed] is used to indicate the recommended value of -106 dBm ±4dB is specific to cells that meet the “hho” distinction. • The terms “Core” and “Border” • Border Cell: Any 3G cell where the antenna orientation points out of a launch cluster or polygon into the 2G network. With respect to IRAT terminology, these sectors are considered (hho) sectors. • Core Cell: 3G cells within the UMTS polygon that do not qualify as Border Cells. These cells can be designated as (sho) or (hho) if there are Inter-Frequency borders within the Core. Ideally, there should not be any Inter-RAT borders within the Core.

1.8

Contacts

For questions or comments about this document's technical content or to request changes to the document, contact:

Michael Noah, Sr. System Engineer – National Field Support Desk: 425 580 6716 Wireless: 425 580 6716 E-mail: [email protected]

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 9 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

2. New Features in P3 (WRAN P5MD Phase II) This section provides a summary of updates AT&T has elected to implement within this version of RNS software.

2.1

Idle Mode

2.1.1 URA_PCH The URA_PCH State is now available to all UEs. The URA_PCH State allows the RNS to maintain the location of the UE within the RNC thereby reducing the Routing Area Update load on the SGSN.

2.1.2 Introduciton of CELL_FACH State for HS capable UEs The CELL_FACH State is now available to HS capable UEs. Before P5MD, CELL_FACH was only available to R99 only UEs.

2.2

Call Establishment

2.2.1 2xPS Radio Access Bearers UEs that are able to support multiple Interactive / Background R99 Data RABs are now supported. Speech + 2 Data RABs is also supported. For example, you can now use Video Share on your Samsung A707 while it is teathered to your laptop.

2.2.2 Enhanced Uplink (EUL) or HSUPA Ericsson P5MD introduces Enhanced Uplink (EUL) or HSUPA as specificed in Release 6 of the 3GPP specification. Enhanced Uplink (EUL) is much like HSDPA in that it allows for greater throughput and capacity through Link Adaptation. Unlike HSDPA however, EUL does use Macro Diversity and Inner Loop Power Contorl in the Uplink.

2.3

Mobility and Connection Management

2.3.1 Introduction of additional R99 RABs In P5MD, R99 Radio Access Bearers include 64, 128 and 384 on both the Uplink and Downlink. All Uplink/Downlink combinations are now supporteded.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 10 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

2.3.2 Event 6a has been replaced with Event 6d If the UE transmitted power is at maximum for a time equal to timeToTrigger6d, then event 6d occurs and the UE is commanded to do Compressed Mode measurements.

2.3.3 Code Division Multiplexing for HSDPA Cells can now support up to 15 High Speed Physical Downlink Shared CHannels (HS-PDSCH).

2.3.4 hoTypeDrncBand1-17 has been replaced with defaultHoType In P5MD, the Serving RNC determines if UEs will measure Inter-RAT or Inter-Frequency for UEs served by a Drift RNC by using the defaultHoType [Cell, 1=GSM_PREFERRED, String, Fixed] parameter which is uarfcnDl [Cell, N/A, Integer, Variable] specific instead of band specific.

2.3.5 Calculation of maxDlPowerCapability In P5ED, the configurable parameter maximumTransmissionPower [Cell, 400, 0.1dBm, Var.] which sets the maximum power (downlink capacity) available in the cell at the Reference Point (antenna connector) was used for Admission Control. In P5MD, the minimum value of either maximumTransmissionPower [Cell, 400, 0.1dBm, Var.] or maxDlPowerCapability (a value calculated by the Node B at the Reference Point and sent to the RNC) is used for Admission Control.

2.3.6 Throughput triggered Dedicated to Dedicated Up and Down-Switch (Uplink and Downlink) Throughput based Down-Switch for all R99 RABs on the Uplink and Downlink is now supported.

2.4

OSS Related Functionality

2.4.1 Neighbor List Prioritization It is now possible to re-order neighbor lists without having to remove and re-enter them. This is accomplished through a new neighbor indexing capability.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 11 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

3. Significant KPI Impact Parameters Each parameter within this document will to a certain degree impact Key Performance Indicators (KPI). The following sections describes functions, e.g. Call Establishment, Handover, etc. that have the most impact on KPIs.

3.1

Accessibility

5.1.2.2 Camping on a Suitable Cell 5.1.3.1 Attach Procedure - RACH Ramping and Initial DCH Power Algorithms and Parameters 5.2.2.2 Admission Control 5.3.2 Cell Reselection in Idle Mode or CELL_FACH

3.2

Retainability

5.3.2 Cell Reselection in Idle Mode or CELL_FACH 5.3.3 Handover in Connected Mode (CELL_DCH) – Intra-Frequency

3.3

Quality

5.3.9 Downlink and Uplink Power Control

3.4

Throughput and Latency

5.1.3.1 Attach Procedure - RACH Ramping and Initial DCH Power Algorithms and Parameters 5.2.2.2 Admission Control 5.3.2 Cell Reselection in Idle Mode or CELL_FACH 5.3.9 Downlink and Uplink Power Control

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 12 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

4. Design Criteria This section mainly covers areas specified in the 3GPP standard. It presents an overview of the spectrum allocation, UARFCN designation and UE Power Class. A fundamental Link Budget is provided. The rest of the section provides a high level optimization concept for WCDMA including Pilot Pollution optimization, neighbor designation guidelines, and a detailed description of the fundamental W-CDMA measurements CPICH RSCP and CPICH Ec/No.

4.1

UE Capabilities

Multiband support for the United States (800/1900 MHz) was not defined until Release 6 of the 3GPP specification. For this reason, Release 6 is the reference for this section.

4.1.1 Frequency Bands The frequency bands specified are shown in the table below including the separation (in MHz) between uplink and downlink frequencies. AT&T operates UMTS at 800 MHz (Band V) and 1900 MHz (Band II). The rest of the bands listed are included for completeness. Table 1: Operating Bands Operating Band

UL Frequencies

DL Frequencies

TX-RX Separation

I

1920 – 1980 MHz

2110 – 2170 MHz

190 MHz

II

1850 – 1910 MHz

1930 – 1990 MHz

80 MHz

III

1710 – 1785 MHz

1805 – 1880 MHz

95 MHz

IV

1710 – 1755 MHz

2110 – 2155 MHz

400 MHz

V

824 – 849 MHz

869 – 894 MHz

45 MHz

VI

830 – 840 MHz

875 – 885 MHz

45 MHz

4.1.2 Channel Numbering Scheme (UARFCN) The UTRA Absolute Radio Frequency Channel Number allows easy reference to the spectrum allocated to UMTS. Distinct UARFCNs are used for uplink and downlink frequencies as opposed to a single UARFCN for a pair of UL/DL frequencies. The UARFCN for the downlink is controlled through uarfcnDl [Cell, N/A, Integer, Variable] and the uplink UARFCN is controlled through uarfcnUl [Cell, N/A, Integer, Variable]. A UARFCN occupies 5 MHz of spectrum. The specification allows for two methods to be used to associate center carrier frequency to UARFCN. • “General” UARFCN method. Each UARFCN is defined with a specific center frequency. Beginning at 0 Hz, the UARFCN is incremented by 1 with each increment in frequency of 200 kHz. The UARFCN corresponding to the center frequency is calculated by finding the product of 5 and the center frequency (in MHz); i.e. UARFCN = 5 * Frequency (MHz). When using the “general” method, this formula applies regardless of direction (uplink / downlink) and band. • “Additional Channels” UARFCN method. The “Additional Channels” are specified according to the table below. These channels are shifted by 100 KHz relative to the “general” URFCN definition. For Band II, the UARFCN is

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 13 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 calculated by finding the product of 5 and the center carrier frequency (in MHz) minus 1850.1 MHz, i.e UARFCN = 5 * (Frequency in MHz – 1850.1 MHz). For Band V, the UARFCN is calculated by finding the product of 5 and the center carrier frequency (in MHz) minus 670.1 MHz, i.e UARFCN = 5 * (Frequency in MHz – 670.1 MHz).

Either the “General” or “Additional Channels” method can be used to designate UARFCNs based upon where you choose to locate UMTS within your licensed spectrum.

Table 2: UARFCN List for Bands II and V (“Additional Channels” method) UL UARFCN

UL Center Frequency (MHz)

DL UARFCN

DL Center Frequency (MHz)

PCS / Cellular Band

12

1852.5

412

1932.5

PCS – A

37

1857.5

437

1937.5

PCS – A

62

1862.5

462

1942.5

PCS – A

87

1867.5

487

1947.5

PCS – D

112

1872.5

512

1952.5

PCS – B

137

1877.5

537

1957.5

PCS – B

162

1882.5

562

1962.5

PCS – B

187

1887.5

587

1967.5

PCS – E

212

1892.5

612

1972.5

PCS – F

237

1897.5

637

1977.5

PCS – C3

262

1902.5

662

1982.5

PCS – C4

287

1907.5

687

1987.5

PCS – C5

782

826.5

1007

871.5

Cellular – A

787

827.5

1012

872.5

Cellular – A

807

831.5

1032

876.5

Cellular – A

812

832.5

1037

877.5

Cellular – A

837

837.5

1062

882.5

Cellular – B

862

842.5

1087

887.5

Cellular – B

4.1.3 Power Classes The table below indicates the UE Power Classes specified as of Release 6. Note the maximum power is the same for all bands within Power Classes 3 and 4. The power in dBm refers to the maximum total output capability of the UE at the antenna connector and not to the maximum power output of any particular Physical Channel.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 14 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Table 3: UE Power Classes Operating Band

Power Class 1

Power Class 2

Power Class 3

Power Class 4

Power (dBm)

Tol (dB)

Power (dBm)

Tol (dB)

Power (dBm)

Tol (dB)

Power (dBm)

Tol (dB)

I

+33

+1/-3

+27

+1/-3

+24

+1/-3

+21

+2/-2

II

-

-

-

-

+24

+1/-3

+21

+2/-2

III

-

-

-

-

+24

+1/-3

+21

+2/-2

IV

-

-

-

-

+24

+1/-3

+21

+2/-2

V

-

-

-

-

+24

+1/-3

+21

+2/-2

VI

-

-

-

-

+24

+1/-3

+21

+2/-2

4.1.4 UE Category (HSDPA and EUL) HSDPA capable UEs are further categorized based upon their throughput capabilities. The table below includes all of the UE Categories as defined in the 3GPP Specification. Note that Category 11 and 12 UEs only support QPSK. If supportOf16qam [Cell, 1=TRUE, Integer, Fixed] is set to 1=TRUE, then 16QAM is allowed and all categories of UE shown below are supported. Table 4: UE Categories (HSDPA) HS-DSCH Category

Maximum number of HSDSCH codes received

Minimum interTTI interval

Maximum number of bits of an HS-DSCH transport block received within an HS-DSCH TTI

Total number of soft channel bits

Category 1

5

3

7298

19200

Category 2

5

3

7298

2889

Category 3

5

2

7298

2880

Category 4

5

2

7298

38400

Category 5

5

1

7298

57600

Category 6

5

1

7298

67200

Category 7

10

1

14411

115200

Category 8

10

1

14411

134400

Category 9

15

1

20251

172800

Category 10

15

1

27952

172800

Category 11

5

2

3630 QPSK Only

14400

Category 12

5

1

3630 QPSK Only

28800

EUL capable UEs are categorized based upon their throughput capabilities. The table below includes all of the UE Categories as defined in the 3GPP Specification. The initial UEs in the market are EUL Category 3.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 15 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Table 5: UE Categories (EUL) E-DCH Category

Maximum number of E-DPDCH codes and SF

Support for 10ms and/or 2ms TTI

Layer 1 Peak Rate/s

Layer 1 Peak Rate/s

(10ms TTI)

(2ms TTI)

Category 1

One SF4

10ms only

730kb

-

Category 2

Two SF4

Both

1.46mb

1.46mb

Category 3

Two SF4

10ms only

1.46mb

-

Category 4

Two SF4

Both

2.0mb

2.92mb

Category 5

Two SF4

10ms only

2.0mb

-

Category 6

Four (2SF2+2SF4)

Both

2.0mb

5.76mb

4.2

Link Budget

In this simple presentation of the link budget, only the maximum transmit power and receive sensitivity of the Node B and UE at their respective antenna connectors is considered. The difference between the maximum transmit power of one node and the maximum receive sensitivity at the other node is considered to be the maximum allowable path loss. The resulting uplink and downlink path losses are compared resulting in a difference in dB between the uplink and downlink maximum path losses. Table 6: Link Budget Downlink

Value

Notes

Max Tx Power (dBm)

+30

Manually calculated (balanced) Node B Tx Pwr.

Max Rx Sensitivity (dBm)

-115

Specification based UE Rx level at 0.1% BLER.

145

Difference between Node B Tx and UE Rx Sens.

Max Tx Power (dBm)

+24

Max Tx Power for a Power Class 3 UE.

Max Rx Sensitivity (dBm)

-121

Specification based Node B Rx level at 0.1% BLER.

145

Difference between UE Tx and Node B Rx Sens

Max path loss (dB) Uplink

Max path loss (dB) Difference (dB)

0

Difference between UL and DL path losses

The only non-specified value is “Max Tx Power (dBm)” for the Downlink. This value was chosen specifically because it balances the Uplink and Downlink path losses. A complete Link Budget analysis would include variables such as LNA existence, various Radio Access Bearers due to their difference in gain as a function of Spreading Factor (a description of Spreading Factor is provided in the Measurement Fundamentals section), cable loss, Antenna and Macro Diversity (a description of Macro Diversity is provided in the Mobility Management section), etc.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 16 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

4.3

Basic Design Requirements

This section describes fundamental design guidelines that are required for basic system operation. It is strongly suggested that these basic requirements be satisfied before further optimization of the radio network is pursued. For example, if this were an FDMA/TDMA network such as GSM or IS-136, frequency planning would be included in this section. However, since frequency reuse is not a primary consideration in WCDMA, it is not included.

4.3.1 Pilot Pollution Since the basis of WCDMA is to allow for multiple access based upon code division instead of frequency division, care must be taken to manage over-propagation of cells in the network. As mentioned later in the Neighbor List Determination section, all cells that provide coverage in a given geographic area must be neighbors; else they are seen as noise. An over-propagating cell would therefore need to have neighbor relationships with all cells with which it overlaps. This of course would mean the overpropagating cell would be heavily utilized and would require a very large capacity. Over-propagating cells also cause Call Establishment problems. Call Establishment has its own section within this guide, but in short; a UE establishes calls on a single cell based upon its having the best Common Pilot Channel (CPICH) signal level and/or quality. If a cell has propagated into an area where there are no neighbors assigned from it to other closer cells in terms of distance to the mobile, the call will drop. Even if there are neighbors assigned, the noise level will be increased for a short time until the surrounding cells have been added to the call through the process of Soft Handover. Fundamentally, Pilot Pollution is Common Pilot Channel (CPICH) power where it is not desired due the over-propagation of cells. The current method used to reduce Pilot Pollution requires a drive test of the area with a CPICH scanner. CPICH propagation is then analyzed graphically (maps) and statistically. The criteria for Pilot Pollution is 4 or more Common Pilot Channels serving within 5 dB of each other in the same geographic area. In most cases, power changes, down-tilts, azimuth changes or antenna changes are required to reduce over-propagation.

4.3.2 Neighbor List Determination Neighbor relationships fall into 3 categories where UMTS and the interaction between UMTS and GSM are concerned. • Intra-UARFCN Neighbors. These neighbor relationships are assigned wherever there is coverage overlap between cells having the same UARFCN. These neighbor relationships allow for Soft Handover. It is important to assign neighbor relationships between overlapping cells in order to allow multiple cells covering the same geographic area to collectively serve a given UE.

A cell covering an area, but not in the other server’s neighbor lists is seen as noise by the UE which causes the UE compensate by requiring more power. • Inter-UARFCN Neighbors. These neighbor relationships allow for Hard Handover between cells with different

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 17 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 UARFCNs. The neighboring UARFCNs can be in either the same band or in a different band. Neighbor relationships should be assigned between all overlapping UARFCNs. • Inter-RAT Neighbors. Inter-RAT neighbor relationships allow for Hard Handover and Cell Reselection between UMTS and GSM. The UMTS coverage area in all AT&T markets is a subset of the GSM coverage. Inter-RAT neighbors should only be defined from UMTS to GSM cells that support EGPRS (EDGE). This is done in order to allow for the greatest throughput when the UE performs an Inter-RAT Cell Change from the 3G to the 2G network. Idle Mode Cell Reselection neighbors should be defined xx Inter-RAT neighbors should also be assigned to allow UEs to handover from UMTS to GSM where there are no suitable UMTS carriers (coverage holes) within the UMTS polygon.

Important! – Neighbor relationships for speech must not be defined from GSM to UMTS in order to avoid E911 calls handing back to UMTS before they are ended.

Ericsson further defines neighbor types based upon how they exist between different RNCs and technologies (GSM vs. UMTS). • UTRAN Relations. All intra-RNC neighbor definitions including Intra and Inter-UARFCN. • External UTRAN Relations. All inter-RNC neighbor definitions including Intra and Inter-UARFCN. • GSM Relations. All Inter-RAT neighbor definitions.

4.3.3 Scrambling Code Usage Each cell in the network is assigned a Primary Scrambling Code. The primaryScramblingCode [Cell, 0 to 511, Integer, Variable] parameter is an integer value 0-511 inclusive. For the interest of this section, it is important to avoid co-UARFCN co-Scrambling Code use in the same geographic area. However, if there are more than 512 cells in use, Scrambling Codes must be reused very carefully. It is suggested that reuses of Scrambling Code among the same UARFCN only exist where there is ample isolation. Optionally, Scrambling Codes can also be divided into 64 groups of 8 codes each. Scrambling Code planning would then be much like frequency planning with a reuse of 64. The advantage to this type of planning could be a less complex code search procedure for the UE.

4.4

Measurement Fundamentals

Before we get into Idle Mode, Call Establishment and Mobility Management, it is important to understand the fundamental measurements used by the UE and RNS to make radio related decisions. These measurements are commonly used when referencing signal level (RSCP) and signal quality (Ec/No). The signal level (RSCP) and signal quality (Ec/No) of the Primary Common Pilot Channel (CPICH) define the coverage area of the cell. SIR and BLER are also described as they are used to control uplink and downlink power.

4.4.1 PCPICH The Primary Common Pilot Channel (CPICH) is one of the continuously transmitted downlink Physical Channels. It is unique in that it is the reference used by the UE to make radio related decisions for Cell Selection, Cell Reselection , Soft (intra-frequency) Handover and Hard (inter-frequency) Handover as well

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 18 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

as Inter-RAT Handover. All signal level and quality measurements are made based upon or relative to the Primary Common Pilot Channel. The power of Primary Common Pilot Channel is set to an absolute value per cell at the Reference Point (antenna connector) through the primaryCpichPower [Cell, 300, 0.1dBm, Fixed] parameter. All other downlink Physical Channels on the cell are set relative (dB) to the Primary Common Pilot Channel. Since proper downlink power settings are necessary to allow the UE to enter Idle Mode, they are covered in detail in the Idle Mode section.

4.4.2 PCPICH RSCP The Primary Common Pilot Channel Received Signal Code Power, commonly called “RSCP”, is simply the received power (dBm) of the Common Pilot Channel. In order to really understand Received Signal Code Power (RSCP), it is important to understand the basic concept of spreading and de-spreading. Spreading is the process of taking a signal, in this case the Primary Common Pilot Channel (CPICH) signal, and transforming it into a signal that occupies a much larger bandwidth. This is done in two steps. First, the original signal is binary multiplied by a Spreading Code. The Spreading Code, also known as the Channelization Code or Orthogonal Variable Spreading Factor (OVSF) Code is unique within the cell and when binary multiplied by Primary Common Pilot Channel (CPICH) signal allows it to be isolated from the other spread signals within the cell. The Primary Common Pilot Channel (CPICH) has a bit rate of 30kb/s. 2 bits = 1 symbol in the downlink. The bits in the Spreading Code are referred to as “chips”. The number of chips per data symbol is called the Spreading Factor. 3,840,000 chips / 15,000 symbols = 256. The Primary Common Pilot Channel (CPICH) uses a Spreading Factor of 256. Seen yet another way, each Primary Common Pilot Channel (CPICH) symbol is spread into 256 chips causing the spread signal to occupy 256 times the bandwidth of the original signal.

Second, since the Spreading Codes are only unique within a cell, the signal must be further “scrambled” to make it unique within the geographic coverage area. This is done by exclusively ORing the already spread signal with a primaryScramblingCode [Cell, 0 to 511, Integer, Variable]. There are a total of 512 Primary Scrambling Codes available, so co-UARFCN co-Primary Scrambling Code use might be necessary in geographic areas with greater than 512 cells. See the Scrambling Code Selection section for cautions. At the other end, receiving the symbols is simply a matter of first de-scrambling, then de-spreading the signal using the same scrambling and spreading codes used to initially spread the symbols.

4.4.3 CPICH Ec/No (Ec/Io) The Primary Common Pilot Channel (CPICH) received Energy per Chip (Ec) to Noise (No) ratio, commonly referred to as Eee-Cee-N-Not, is used to measure the received quality of the Primary Common Pilot Channel (CPICH). It is the ratio of the received Energy per Chip to the Noise power spectral density in the band. In this case, the Chip Energy (Ec) is the power of the spread Primary Common Pilot Channel (CPICH) at the receiver. Ec is equivalent to Received Signal Code Power (RSCP) in that both measure the power of the Primary Common Pilot Channel (CPICH); the only difference being Ec is the power of

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 19 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

the spread signal whereas RSCP is the power measured after de-spreading. No (N-not) is the received wide band power, including thermal noise and noise generated in the receiver within the receiver’s bandwidth. The term Ec/Io is also used to denote Primary Common Pilot Channel (CPICH) quality with the only difference being the denominator where Io includes interference only. The use of the term Ec/Io is where receivers are concerned is not technically accurate due mainly to the fact that receivers do not discern Noise from Interference and as such, cannot accurately measure Ec/Io. However, Io is commonly used in RF Design (propagation) tools when noise is not considered.

4.4.4 Eb/No Eb/No, commonly referred to as Eee-Bee-N-Not or ebno, is the received energy per Bit (symbol) of the signal over the received wide band power, including thermal noise and noise generated in the receiver, within the receiver’s bandwidth. The fundamental difference between Eb/No and Ec/No is Spreading Factor. Ec is of course the energy of the spread signal. By factoring in the Spreading Factor, we get the energy of a bit or symbol over the received wide band power, including thermal noise and noise generated in the receiver, within the receiver’s bandwidth. Eb/No therefore equals Ec/No * Spreading Factor. Eb/No is commonly used when referencing Physical Channels that carry user data or signaling as opposed to Physical Channels such as the Common Pilot Channel (CPICH) which only carries repetitive data.

4.4.5 SIR SIR is the Signal to Interference Ratio. It is equivalent to (RSCP / ISCP) * Spreading Factor. RSCP is defined above; ISCP is the Interference Signal Code Power which is essentially the interference from other cells (DL) or UEs (UL) excluding noise. SIR is a quality metric used to maintain appropriate power levels in the uplink and downlink. The UTRAN uses a very fast power control technique called “closedloop power control” where power is adjusted 1500 times per second in order to maintain the Signal to Interference Ratio at a configured target value. SIR is further explained in the Mobility Management section.

4.4.6 RSSI The Received Signal Strength Indication is a signal level measurement of the downlink which includes thermal noise and noise generated in the receiver within the receiver’s bandwidth. Received Signal Strength Indication (RSSI) is equivalent to the No measurement used in Ec/No above.

4.4.7 RTWP Received Total Wideband Power measured by the Node B is the received wide band power, including thermal noise and noise generated in the receiver within the receiver’s bandwidth.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 20 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

4.4.8 BLER BLER is the Block Error Rate at the Transport Channel Layer. CPICH RSCP, CPICH Ec/No, Eb/No and SIR are all measurements of the Physical Layer. The Transport Channel layer resides above the Physical Layer. At the Transport Layer, data from the Physical Layer is put into CRC encoded Blocks. If a Block fails a CRC check, it is considered in error. BLER indicates the percentage of these Blocks in error.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 21 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5. Parameters Described Within Context 5.1

Idle Mode

Idle Mode is a state every UE enters when it is powered on. It is also the state in which each powered on UE spends most of its time. In this state, the UE must be ready and able to Originate and Terminate calls. This section includes cell selection, but does not include Cell Reselection as Cell Reselection is a function of mobility and as such is covered in the Mobility Management section.

5.1.1 Cell Search Procedure After either power up or entry into network coverage, the UE must begin to read information on the BCCH. The Broadcast Control CHannel (BCCH) is used to broadcast System Information to all UEs within its coverage area. This is accomplished in 3 steps. However, before the 3 steps are described, it is important to understand the Slot and Frame structure of the downlink. A Slot is made up of 2560 Chips (meaning it’s a spread signal). 15 Slots make up one 10 ms Frame. 73 Frames make up one Superframe. 1. Slot Synchronization with the downlink is acquired by correlating the Primary Synchronization Code, common to every cell and known by all UEs, with the Primary Synchronization Channel (P-SCH) transmitted on the downlink. It is important to know that neither the Primary nor the Secondary Synchronization Channel are ever Scrambled using the Primary Scrambling Code. Each cell serving in the UE’s geographic area transmits a Primary Synchronization Channel (P-SCH). The cell that the UE is able to obtain the strongest correlation with is chosen as the serving cell. The Primary Synchronization Channel (P-SCH) power level is controlled by the primarySchPower [Cell, -18, 0.1dB, Fixed] parameter which is set relative to the power of the Primary Common Pilot Channel (CPICH). Figure 1: Slot and Frame Structure 720 ms F0

F1

...

F2

F70

F71

...

Superframe = 72 frames

10 ms S0

S1

S2

...

S13

S14

Frame = 15 Slots

.667 ms

...

Slot = 2560 Chips

The process in which UARFCNs are chosen for a Slot Synchronization attempt is UE implementation dependant.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 22 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

2. Even though the UE has acquired Slot Synchronization, it still needs to know the Slot number within a Frame (Frames have 15 Slots) so it can know where the Frame begins. It does this by correlating one of the 16 Secondary Synchronization Codes with the Secondary Synchronization Channel (SSCH). It is important to know that neither the Primary nor the Secondary Synchronization Channel are ever Scrambled using the Primary Scrambling Code. The 16 Secondary Synchronization Codes are used to form 64 unique Secondary Synchronization Channel sequences. Once the UE has decoded 15 successive Secondary Synchronization Codes, it not only knows where the Frame begins, but the Code Group (used in step 3) as well. The UE is now Frame Synchronized. The Secondary Synchronization Channel (S-SCH) power is controlled by the secondarySchPower [Cell, -35, 0.1dB, Fixed] parameter which is set relative to the power of the Primary Common Pilot Channel (CPICH). 3. Now that the UE is Slot and Frame Synchronized, it must still determine the cell’s Primary Scrambling Code before it can begin to read the Broadcast Control CHannel (BCCH). In step 2, the UE discovers the cell’s Code Group. Each Code Group identifies 8 possible Primary Scrambling Codes. The correct Primary Scrambling Code is determined by correlating each of the 8 possibilities with the Common Pilot Channel (CPICH). Once the correct Primary Scrambling Code has been found, the UE can detect the Primary Common Control Physical Channel (P-CCPCH) which carries the Broadcast CHannel (BCH) Transport Channel. The Broadcast CHannel (BCH) transmission power is controlled throughput bchPower [Cell, -31, 0.1dB, Fixed] which is set relative to the power of the Primary Common Pilot Channel (CPICH). The Broadcast CHannel (BCH) carries the Broadcast Control CHannel (BCCH) Logical Channel. The cell’s Primary Scrambling Code is configured using the primaryScramblingCode [Cell, 0 to 511, Integer, Variable] parameter. The Primary Common Control Physical Channel (P-CPPCH) carries the System Frame Number (SFN) which is used as the timing reference for all Physical Channels. The System Frame Number (SFN) ranges from 0 to 4095 (inclusive). For more information about Slot and Frame synchronization, see [3e].

5.1.2 PLMN Selection Now the UE is able to read the Broadcast Control CHannel (BCCH). If the UE finds its subscribed Public Land Mobile Network (PLMN) it then continues to read System Information from the BCCH.

5.1.2.1

Information on the Broadcast Control CHannel (BCCH)

The Broadcast Control Channel (BCCH) broadcasts information consisting of a Master Information Block (MIB), up to 18 System Information Blocks (SIB) types numbered 1-18, and up to 2 Scheduling Blocks (SB). Ericsson has implemented a Master Information Block (MIB) and System Information Blocks (SIB) types 1, 3, 5, 7, 11 and 12. The following breakdown of the Master Information Block (MIB) and System Information Blocks (SIBs) provides an indication of where the UE gets the information necessary in order to maintain Idle Mode, Establish Calls, and Manage Mobility. The “Layer 3 Message” column was derived from TEMS 6.0 log files. The Purpose column provides a brief description of where the parameter applies. • Master Information Block (MIB). The Master Information Block (MIB) is sent at a fixed rate of every 8 Frames (80ms). It contains information that identifies the network as well as the start position and interval of each of the System Information Blocks (SIBs). The Master Information Block (MIB) also contains a Value Tag associated with each System Information Block supported. If the Value Tag for any supported System Information Block changes, the UE must read that System Information Block (SIB). In order to avoid the UE having to read each and every Master Information Block (MIB), a Paging Type 1 message is sent and repeated noOfMibValueTagRetrans [RNC, 0, Retransmissions, Fixed] times to all UEs indicating a Value Tag has changed in the Master Information Block

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 23 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 (MIB).

Table 7: Master Information Block (MIB) Contents Ericsson Parameter

Layer 3 Message

Purpose

mcc

MCC :

The Mobile Country Code

mnc

MNC :

The Mobile Network Code

sib1StartPos

Repx : y

Sets the start position of SIB 1 where x equals the repetition period and y equals the SFN / 2.

sib1RepPeriod

sib-Pos : repx

Sets the SIB 1 repetition period where x equals a number of Frames.

sib3StartPos

Repx : y

Sets the start position of SIB 3 where x equals the repetition period and y equals the SFN / 2.

sib3RepPeriod

sib-Pos : repx

Sets the SIB 3 repetition period where x equals a number of Frames.

sib5StartPos

Repx : y

Sets the start position of SIB 5 where x equals the repetition period and y equals the SFN / 2.

sib5RepPeriod

sib-Pos : repx

Sets the SIB 5 repetition period where x equals a number of Frames.

sib7StartPos

Repx : y

Sets the start position of SIB 7 where x equals the repetition period and y equals the SFN / 2.

sib7RepPeriod

sib-Pos : repx

Sets the SIB 7 repetition period where x equals a number of Frames.

sib11StartPos

Repx : y

Sets the start position of SIB 11 where x equals the repetition period and y equals the SFN / 2.

sib11RepPeriod

sib-Pos : repx

Sets the SIB 11 repetition period where x equals a number of Frames.

sib12StartPos

Repx : y

Sets the start position of SIB 12 where x equals the repetition period and y equals the SFN / 2.

sib12RepPeriod

sib-Pos : repx

Sets the SIB 12 repetition period where x equals a number of Frames.

• System Information Block 1 (SIB 1). System Information Block 1 (SIB 1) contains Location Area (LA), Routing Area (RA) information and timer parameters. Since this System Information Block contains the Location Area (LA) and Routing Area (RA) information, it must also be read when a LA or RA border is crossed. The parameter sib1PLMNScopeValueTag [Cell, 0 to 31, Integer, Variable] controls when System Information Block 1 (SIB 1) is read and must be set so that neighboring Location Areas and Routing Areas have different values.

Table 8: System Information Block 1 (SIB 1) Contents Ericsson Parameter

Layer 3 Message

Purpose

lAC

LAC : xxxxx

Location Area Code used by CS Core Network

t3212

CS domain – T3212 : x

Periodic Location Area Update interval in deci-minutes, e.g. 1 = 6 minutes.

att

CS domain – ATT : x

Indicates if the UE is allowed to IMSI Attach to the CS

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 24 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Ericsson Parameter

Layer 3 Message

Purpose Core Network

cnDrxCycleLengthCs

CS domain – DRXCycleLengthCoeff : k

Discontinuous Reception (DRX) Cycle Length Coefficient.

rAC

RAC : xx

Routing Area Code used by PS Core Network

nmo

NMO : x

Network Mode of Operation

cnDrxCycleLengthPs

PS domain – DRXCycleLengthCoeff : k

Discontinuous Reception (DRX) Cycle Length Coefficient.

• System Information Block 3 (SIB 3). System Information Block 3 (SIB 3) contains parameters for cell selection and reselection.

Table 9: System Information Block 3 (SIB 3) Ericsson Parameter

Layer 3 Message

Purpose

qualMeasQuantity

cellSelectQualityMeasur e:x

Determines if cell ranking uses quality measurements.

sRatSearch

s-SearchRAT : x

Used to determine when Inter-RAT measurements begin.

sHcsRat

s-HCS-RAT : x

Used to determine when Inter-RAT measurements begin.

qQualMin

q-QualMin : x

Used in Cell Selection and Re-selection

qRxLevMin

q-RxlevMin : x

Used in Cell Selection and Re-selection

qHyst2

q-Hyst-I-S : x

Used in Cell Selection and Re-selection

treSelection

t-Reselection-S : x

Used in Cell Selection and Re-selection

maxTxPowerUl

maxAllowedUL-TXPower : x

Max UE power allowed on the uplink.

cellReserved

CellReservedForOperat orUse : x

Indicates if the cell is reserved by the operator.

• System Information Block 5 (SIB 5). System Information Block 5 (SIB 5) contains parameters that determine the configuration of Common Physical Channels (PhyCHs) in the cell.

Table 10: System Information Block 5 (SIB 5) Ericsson Parameter

Layer 3 Message

Purpose

pichPower

pich-PowerOffset : x

Power level of the Page Indication CHannel (PICH) relative to the Primary Common Pilot Channel (CPICH) power

aichPower

Aich-PowerOffset : x

Power level of the Acquisition Indication CHannel (AICH) relative to the Primary Common Pilot Channel (CPICH) power

primaryCpichPower

primaryCPICH-TXPower : x

Power level of the Primary CPICH

ConstantValueCprach

constantValue : x

Used by the UE to calculate initial power on the

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 25 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Ericsson Parameter

Layer 3 Message

Purpose PRACH.

powerOffsetP0

powerRampStep : x

Preamble power step when no Acquisition Indicator is received.

preambleRetransMax

preambleRetransMax : x

Maximum number of Preambles sent in one ramping cycle

• System Information Block 7 (SIB 7). System Information Block 7 (SIB 7) contains uplink interference value. Due to the fact that this value changes very often, this System Information Block’s interval is controlled by a timer. When the UE receives System Information Block 7 (SIB 7), a timer is started. Once the timer expires, the information is considered invalid and the UE reads the information again. The expiration time is the value of the sib7RepPeriod [RNC, 16, Frames, Fixed] parameter multiplied by the sib7expirationTimeFactor [RNC, 1, Factor, Fixed] parameter.

Table 11: System Information Block 7 (SIB 7) Ericsson Parameter n/a

Layer 3 Message ul-Interference

Purpose Provides uplink Received Total Wideband Power (RTWP). RTWP = No

• System Information Block 11 (SIB 11). System Information Block 11 (SIB 11) contains the cell’s soft/softer handover neighbor list including the Primary Scrambling Code of each neighbor. This handover list is supplied to the UE before a call is established so that the UE may make Intra-frequency measurements before receiving the MEASUREMENT CONTROL message from the Serving Radio Network Controller (SRNC).

Table 12: System Information Block 11 (SIB 11) Ericsson Parameter

Layer 3 Message

Purpose

reportingRange1a

e1a – reportingRange : x

CPICH reporting range add threshold.

hysteresis1a

e1a – hysteresis : x

Hysteresis used for CPICH add threshold.

timeToTrigger1a

e1a – timeToTrigger : x

Time between CPICH add and reporting.

reportingRange1b

e1b – reportingRange : x

CPICH reporting range drop threshold.

hysteresis1b

e1b – hysteresis : x

Hysteresis used for CPICH drop threshold.

timeToTrigger1b

e1b – timeToTrigger : x

Time between CPICH drop and reporting.

hysteresis1c

e1c – hysteresis : 2

Hysteresis used for CPICH replacement.

timeToTrigger1c

e1c – timeToTrigger : x

Time between CPICH replacement and reporting.

hysteresis1d

e1d – hysteresis : x

Hysteresis used in best CPICH replacement.

timeToTrigger1d

e1d – timeToTrigger : x

Time between best CPICH replacement and reporting.

• System Information Block 12 (SIB 12). System Information Block 12 (SIB 12) contains measurement control information to be used in the cell.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 26 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Table 13: System Information Block 12 (SIB 12) Ericsson Parameter n/a

Layer 3 Message n/a

Purpose There are no configurable parameters reported in this SIB

The UE reads System Information only when one of the following events occurs: • The UE is powered up. • Immediately after Cell Reselection (except SIB 1 where the parameter sib1PLMNScopeValueTag [Cell, 0 to 31, Integer, Variable] is used). • The UE receives a Paging Type 1 message indicating System Information has changed. Then the MIB is read which indicates the SIBs that have been updated. • The timer expires for SIBs with an expiration timer (SIB 7 only).

Otherwise, in order to conserve battery life, the UE does not read the System Information. This is something to consider when observing Layer 3 messages using a diagnostic UE.

5.1.2.2

Camping on a Suitable Cell

Now that the UE has read the Broadcast Control CHannel (BCCH), it knows the values of the parameters that help the UE determine if the cell is suitable. The Cell must not be Reserved and it must be suitable in terms of signal level (Srxlev) and quality (Squal). cellReserved [Cell, NOT_RESERVED, String, Variable] is a cell based parameter sent in System Information Block 3 (SIB3). It has two possible settings; RESERVED and NOT_RESERVED. When set to RESERVED, only UEs with SIMs having an ACC of 11 or 15 (set in the SIM’s HLR profile) will be allowed to camp on the cell assuming the cell is on their home PLMN. See TS 25.306 for details. All other UEs (with SIMs having other than ACC 11 or 15) will avoid camping on the cell. The UE’s Cell Reselection process will also avoid reserved cells. accessClassNbarred [Cell, 0, Integer, Fixed] is another cell based parameter sent in System Information Block 3 (SIB3). It makes it possible to disallow UEs with SIM that have specific Access Classes provisioned for them in the HLR from accessing the network. This parameter differs from the cellReserved [Cell, NOT_RESERVED, String, Variable] parameter in that accessClassNbarred [Cell, 0, Integer, Fixed] still allows the UE to camp on the network. This could cause a worst case senerio wherein the UE camps on the 3G network, but is not allowed to register. The signal level (Srxlev) and quality (Squal) parameters are commonly referred to as the “S” parameters. Srxlev = Qrxlevmeas – qRxLevMin [Cell, -115, dBm, Fixed] – Pcompensation Where: • Srxlev is the signal level criteria used to determine a cell’s suitability. • Qrxlevmeas is the Primary Common Pilot Channel Received Signal Code Power (PCPICH RSCP) as measured by the UE. • qRxLevMin [Cell, -115, dBm, Fixed] is sent in System Information Block 3 (SIB 3) for the serving cell which

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 27 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 indicates the minimum acceptable Primary Common Pilot Channel Received Signal Code Power (PCPICH RSCP). • The quantity called Pcompensation is the maximum value of maxTxPowerUl [Cell, 24, dBm, Fixed] – P or 0 where maxTxPowerUl [Cell, 24, dBm, Fixed] is sent in System Information Block 3 (SIB 3) which indicates the maximum transmission power allowed for a UE and P is the output power of the UE according to its Power Class.

Example part 1 of 3. A Power Class 3 UE is served at a path loss 10 dB less than the maximum path loss as indicated in the Link Budget table, qRxLevMin [Cell, -115, dBm, Fixed] is set conservatively at -115 dBm, and maxTxPowerUl [Cell, 24, dBm, Fixed] is set at 24 dBm. Pcompensation is the maximum value of either 24 dBm – 24 dBm or 0. So Srxlev = -105 dBm minus -115 dBm minus 0. Srxlev = 10. Squal = Qqualmeas – qQualMin [Cell, -19, dB, Fixed] Where: • Qqualmeas is the Primary Common Pilot Channel Chip Energy over Noise Spectral Density (PCPICH Ec/No) as measured by the UE. • qQualMin [Cell, -19, dB, Fixed] is sent in System Information Block 3 (SIB 3) for the serving cell indicates the minimum acceptable Primary Common Pilot Channel Chip Energy over Noise Spectral Density (PCPICH Ec/No) for the cell.

Example part 2 of 3. The UE is served at an Ec/No of -14 dB and qQualMin [Cell, -19, dB, Fixed] is set at -19 dB. -14 dB minus -19 dB. Squal = 5 dB.

The cell is considered suitable if its cell selection criterion (S criterion) is met. In order for the S criterion to be met, Srxlev and Squal must have positive values. Example part 3 of 3. The UE calculates both S criteria with positive resulting values. The cell is considered acceptable where the S criterion is concerned. It is now allowed to transmit on the uplink.

5.1.3 IMSI and GPRS Attach Assuming now that the UE has found its home PLMN and is Camping on a suitable cell, it must International Mobile Subscriber Identity (IMSI) Attach and General Packet Radio Service (GPRS) Attach to the Circuit Switched (CS) and Packet Switched (PS) Core Networks (CN) respectively. This process is also known as Registration.

5.1.3.1

Attach Procedure

If att [LA, 1=TRUE, Integer, Fixed] sent in System Information Block 1 (SIB 1) is set to 1, the UE must establish a Signaling Connection to notify the Circuit Switched Core Network (CS-CN) and Packet Switched Core Network (PS-CN) that it is powered on and within network coverage. Signaling Connections are always initiated by the UE. First, the UE must access the Node B in order to send a request to the RNC to establish a Radio Resource Control (RRC) Connection. This is done through the Physical Random Access Channel (PRACH) on the uplink and the Acquisition Indicator Channel (AICH) on the downlink. The UE sends successive attempts on the uplink, each at a greater power level until the Node B responds on the Acquisition Indicator CHannel (AICH) on the downlink. The Acquisition Indicator CHannel (AICH) power is set relative to the Primary Common Pilot CHannel (PCPICH) through

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 28 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

aichPower [Cell, -6, dB, Fixed]. The process of sending successive attempts, each at an increased power level, is known as Preamble Ramping. The initial power on the PRACH is determined by the UE using the following formula: P_PRACH = L_PCPICH + RTWP + ConstantValueCprach [Cell, -27, dB, Fixed] • P_PRACH is the power used for the initial PRACH attempt. • L_PCPICH is the path loss estimated by the UE (difference between primaryCpichPower [Cell, 300, 0.1dBm, Fixed] as indicated in SIB 5 and PCPICH RSCP as measured by the UE). • RTWP is the Received Total Wideband Power measured by the Node B as indicated in SIB 7. • ConstantValueCprach [Cell, -27, dB, Fixed] determines the level below the Received Total Wideband Power at which Preamble Ramping begins.

For example, a UE is served at a path loss 10 dB less than the maximum path loss as indicated in the Link Budget table, so L_PCPICH = 132 dB. Let’s also say the RTWP = -105 dBm and ConstantValueCprach [Cell, -27, dB, Fixed] = -27 dB. The sum of these values, or P_PRACH, is 0 dBm. The UE will begin the attempt at 0 dBm.

Subsequent transmission attempts within a Ramping Cycle are made at an increased power level relative to the former attempt. The increase in power level between steps is controlled by the parameter powerOffsetP0 [Cell, 2, dB, Fixed] which the UE reads from System Information Block (SIB) 5. The UE ceases its access attempt as soon as it receives an Acknowledgement Indicator (AI) on the downlink Acquisition Indication CHannel (AICH). However, the UE is not allowed to ramp its power indefinitely. The preambleRetransMax [Cell, 15, Preambles, Fixed] parameter in SIB 5 controls how many successive Preambles the UE can transmit within one Ramping Cycle and the maxPreambleCycle [Cell, 3, Cycles, Fixed] parameter controls how many Ramping Cycles can be attempted before the UE aborts the access attempt. Figure 2: Power Ramping on RACH

powerOffsetP0

AI

powerOffsetPpm

P_PRACH Power (dB) Message Part RACH

preambleRetransMax (Ramping Cycle)

AICH Time As soon as the UTRAN responds with an Acknowledgement Indicator (AI) on the downlink, the UE sends the PRACH Message Part informing the Radio Network Controller (RNC) that it wishes to set up a Radio

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 29 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Resource Control (RRC) Connection. The power at which PRACH Message Part is sent is equal to the sum of the power of the successful transmission attempt and powerOffsetPpm [Cell, 0, dB, Fixed]. Once the UE and Radio Network Controller (RNC) have established a Radio Resource Control (RRC) Connection, the RNC establishes an Iu Control Plane connection over the Iu interface to the appropriate Core Network (CN) element(s), i.e. the SGSN, MSC or both. The resulting Transparent Message Transfer connection between the UE and Core Network (CN) element(s) allows the exchange of NonAccess Stratum (NAS) messages such as Registrations, Location or Routing Area Updates, and Service Requests for User Plane connections. The figure below details all of the steps necessary to complete a Radio Resource Control (RRC) Connection. Following the figure are detailed explanations for each step. Figure 3: RRC Connection Signaling Flow

Uu

UE 1

2 3

4 5

10 RRC

NBAP

RRC

Initiate UE Context

Activated Algorithms: - Power Control - Iub and Uu Timing Scheduling - Admission Control Radio Link Setup Request

NBAP

Resource Allocation 6

8

RNC

RRC Connection Request

RACH Message Part

RRC

Iub

Node B

NBAP

Radio Link Setup Response

NBAP

7 AAL2 Connection Setup for DCH Start Receive of UL DPCH Start Radio Link Supervision Suspend SRB3, SRB4 and 9 other RLC AM entities RRC Connection Setup

FACH

RRC

11 Transport Bearer Synchronization Start Transmission of 12 DL DPCH 13

L1 Synchronization 14 NBAP

15 RRC

DCH

Radio Link Restore Indication RRC Connection Complete

16

NBAP RRC

Resume SRB3, SRB4 and other RLC AM entities

1. RRC Connection Request. After the UE receives the Acknowledgement Indicator (AI) on the downlink, it initiates the establishment of a Radio Resource Control (RRC) connection by sending the Radio Resource Control (RRC) Connection Request message with an establishment cause of

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 30 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

“Registration” within the Message Part using the Random Access Channel (RACH) Transport Channel. 2. Initiate UE Context. The Radio Resource Control (RRC) Connection attempt is assigned a UTRAN Radio Network Temporary Identity (U-RNTI) which is unique within the network. 3. Activated Algorithms. At this point, the Power Control algorithm sets the initial downlink and uplink Dedicated Physical Data CHannel (DPDCH) and Dedicated Physical Control CHannel (DPCCH) transmission power. These channels are time multiplexed on the downlink and code (I/Q) multiplexed on the uplink. Together they are typically referred to as a Dedicated Physical CHannel (DPCH). The following initial power level parameters are used whenever a Radio Link is set up. The initial downlink Dedicated Physical Data CHannel (DPDCH) power is determined using the following formula: P_DL_DPDCH = primaryCpichPower [Cell, 300, 0.1dBm, Fixed] + (dlInitSirTarget [RNC, 41, 0.1dB, Fixed] - Ec/No_PCPICH) + cBackOff [RNC, 0, 0.25dB, Fixed] + 10 log(2/SF_DL_DPDCH) Where: • P_DL_DPDCH is the initial downlink Dedicated Physical Data CHannel (DPDCH) power. • primaryCpichPower [Cell, 300, 0.1dBm, Fixed] sets the power of the Primary Common Pilot Channel (P-CPICH) sent in SIB 5. • dlInitSirTarget [RNC, 41, 0.1dB, Fixed] sets the required initial Signal to Interference Ratio (SIR) Target. • Ec/No_PCPICH is the ratio of Chip Energy to the Noise Power Spectral Density of the Primary Common Pilot CHannel (P-CPICH) as measured by the UE. If this measurement is not available, ecNoPcpichDefault [RNC, 16, dB, Fixed] is used. • cBackOff [RNC, 0, 0.25dB, Fixed] is used to offset the value of P_DL_DPDCH. • SF_DL_DPDCH is the Spreading Factor of the downlink Dedicated Physical Data CHannel (DPDCH).

The initial downlink Dedicated Physical Control CHannel (DPCCH) power is set relative to the initial downlink Dedicated Physical Data Channel (DPDCH) power by means of a series of offsets: P_DL_DPCCH_TFCI = (P_DL_DPDCH + pO1 [RNC, 0, 0.25dB, Fixed] ) P_DL_DPCCH_TPC = (P_DL_DPDCH + pO2 [RNC, 12, 0.25dB, Fixed] ) P_DL_DPCCH_PILOT = (P_DL_DPDCH + pO3 [RNC, 12, 0.25dB, Fixed] )

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 31 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Figure 4: Downlink DPCCH Power DL Power (dB)

pO2

pO1 pO3

TPC TFCI

Pilot Data 1

Data 2 Time

DPDCH

DPCCH

DPDCH

DPCCH

1 Timeslot (10ms)

Where: • P_DL_DPCCH_TFCI is the initial power of the Dedicated Physical Control CHannel Transport Format Combination Indicator (DPCCH TFCI) field. • pO1 [RNC, 0, 0.25dB, Fixed] sets the offset between the Data field and the Dedicated Physical Control CHannel Transport Format Combination Indicator (DPCCH TFCI) field. • P_DL_DPCCH_TPC is the initial power of the Dedicated Physical Control CHannel Transmit Power Control (DPCCH TPC) field. • pO2 [RNC, 12, 0.25dB, Fixed] sets the offset between the Data field and the Dedicated Physical Control CHannel Transmit Power Control (DPCCH TPC) field. • P_DL_DPCCH_PILOT is the initial power of the Dedicated Physical Control CHannel Pilot field. • pO3 [RNC, 12, 0.25dB, Fixed] sets the offset between the Data field and the Dedicated Physical Control CHannel Pilot field.

The initial uplink Dedicated Physical Control CHannel (DPCCH) power is determined using the following formula: Power_UL_DPCCH_INIT = DPCCH_POWER_OFFSET - RSCP_PCPICH Where: • Power_UL_DPCCH_INIT is the initial uplink Dedicated Physical Control CHannel (DPCCH) power. • DPCCH_POWER_OFFSET is calculated in the Radio Network Controller (RNC) and sent to the UE according to the following formula:

DPCCH_POWER_OFFSET = primaryCpichPower [Cell, 300, 0.1dBm, Fixed] + RTWP + ulInitSirTarget - 10 log (SF_DPCCH) + cPO [RNC, 0, 0.1dB, Fixed]

Where: • DPCCH_POWER_OFFSET is an offset applied to Power_UL_DPCCH_INIT.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 32 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 • primaryCpichPower [Cell, 300, 0.1dBm, Fixed] sets the power of the Primary Common Pilot CHannel (PCPICH). If the Radio Network Controller (RNC) does now know the Primary Common Pilot CHannel (P-CPICH) power, as is the case when the UE is served by a Drift Radio Network Controller (DRNC), pcpichPowerDefault [RNC, 33, dBm, Fixed] is used instead. • RTWP is the Received Total Wideband Power level on the uplink measured by the Node B. • ulInitSirTarget is one of the following configurable parameters based upon the Spreading Factor of the Radio Bearer. •

ulInitSirTargetSrb [RNC, 57, 0.1dB, Fixed] for stand-alone Signaling Radio Bearers (SRB).

•

ulInitSirTargetLow [RNC, 49, 0.1dB, Fixed] for Radio Access Bearers (RABs) having minimum Dedicated Physical Data CHannel Spreading Factors (DPDCH SF) equal to or higher than 32.

•

ulInitSirTargetHigh [RNC, 82, 0.1dB, Fixed] for RABs having minimum Dedicated Physical Data CHannel Spreading Factors (DPDCH SF) equal to 16 or 8.

•

ulInitSirTargetExtraHigh [RNC, 92, 0.1dB, Fixed] for Radio Access Bearers (RABs) having minimum Dedicated Physical Data CHannel Spreading Factors (DPDCH SF) equal to or lower than 4.

• SF_DPCCH is the Spreading Factor (SF) for the Dedicated Physical Control CHannel. • cPO [RNC, 0, 0.1dB, Fixed] is used to offset the initial uplink Dedicated Physical Data CHannel (DPDCH) power. • RSCP_PCPICH is the Received Signal Code Power (RSCP) of the Primary Common Pilot Channel (P-CPICH).

The initial uplink Dedicated Physical Data CHannel (DPDCH) power is determined according to the relative power offset between the Dedicated Physical Control CHannel (DPCCH) and Dedicated Physical Data Channel (DPDCH) as described in 3GPP TS 25.214. The UTRAN determines and signals the gain factor to the UE for the reference Transport Format Combination (TFC) only. The UE then computes the gain factors for other Transport Format Combinations (TFCs) based on the value for the reference Transport Format Combination (TFC). In addition to uplink and downlink power control, the Iub and Uu Timing Scheduling algorithms calculate channel timing parameters. The Admission Control algorithm checks if the new radio link can be allowed in the cell. The Code Control algorithms allocate the uplink scrambling code, downlink scrambling code, and downlink channelization code. 4. Radio Link Setup Request. The RNC orders the Node B to reserve the necessary resources for a new Node B communication context. 5. Resource Allocation. The Node B reserves the necessary resources for a new communication context and calculates link characteristic parameters from the received uplink and downlink Transport Format Combination Indicator (TFCI) or Transport Format Set (TFS) information. 6. Radio Link Setup Response. The Node B indicates to the RNC that the necessary resources are allocated for the radio link. It includes the binding identifier and transport layer address for the AAL2 connection. 7. AAL2 Connection Setup for DCH. The transport bearer (AAL2 connection) needed for signaling is set up over the Iub by the RNC. 8. Start Receive of UL DPCH – Start Radio Synchronization. The Radio Link Set Supervision algorithm in the Node B starts evaluating the synchronization status of the Radio Link Set (RLS). 9. Suspend SRB3, SRB4, and other RLC AM entities. Signaling Radio Bearer 3 (SRB 3), Signaling Radio Bearer 4 (SRB 4), and other Radio Link Control Acknowledged Mode (RLC AM) entities are suspended.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 33 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

10. RRC Connection Setup. The RNC indicates the UE state shall be CELL_DCH. The message is sent in Unacknowledged mode on the Forward Access CHannel (FACH). 11. Transport Bearer Synchronization. Transport Bearer Synchronization is achieved in the downlink between RNC and Node B for each Dedicated CHannel (DCH). 12. Start Transmission of DL DPCH. The Node B only starts transmitting on the new radio link when the downlink user plane (Dedicated Physical Data CHannel – DPDCH) is considered synchronized. 13. L1 Synchronization. Layer 1 synchronization is achieved between UE and Node B. 14. Radio Link Restore Indication. The Node B notifies the RNC that it has achieved uplink Layer 1 synchronization with the UE. 15. RRC Connection Complete. The UE starts the uplink transmission only after the reception of downlink Dedicated Physical Channel (DPCH). The UE capabilities requested in step 10 are included in this message. This information is used by the Radio Access Bearer (RAB) establishment procedure, UE Security Handling, and the Channel Switching function. Radio Resource Control (RRC) messages can now be sent in acknowledged mode on a Dedicated CHannel (DCH). 16. Resume SRB3, SRB4, and other RLC AM entities. The SRB3, SRB4, and other Radio Link Control Acknowledged Mode (RLC AM) entities are resumed. Through this dedicated connection, the UE is able to Register with the appropriate Core Network (CN) Element(s).

5.1.4 Location and Routing Area Updates Location and Routing Area Updates, also known as Registration updates, must be performed in order to provide the SGSN and MSC with an awareness of where the UE is located. Given the UE’s location, the Core Network (CN) element can page the UE to deliver calls. This awareness helps to avoid unnecessary paging when the UE is either turned off or is outside of the coverage area. Location Areas are defined through the lAC [LA, N/A, Integer, Variable] broadcast on the Broadcast Control CHannel (BCCH) in System Information Block 1 (SIB 1). Routing Areas are defined through the rAC [RNC, N/A, Integer, Variable] also broadcast on the Broadcast Control CHannel (BCCH) in System Information Block 1 (SIB 1). Besides IMSI and GPRS Attaches, there are basically two different types of Registration update; Normal and Periodic.

5.1.4.1

Normal Update

A Normal Location or Routing Area update is performed when the UE either leaves Connected Mode, or performs a Cell Reselection in Idle Mode to a cell within a different Location or Routing Area.

5.1.4.2

Periodic Update

In addition to Normal Updates, Periodic Updates are performed. These updates are preformed regardless of whether the UE is in Idle Mode or Connected Mode (CELL_DCH). • Circuit Switched Core Network. The interval at which the UE periodically updates the Circuit Switched Core Network (CS-CN) is set using the configurable t3212 [LA, 10, 6minutes, Fixed] parameter sent on the Broadcast Control CHannel (BCCH) in System Information Block 1 (SIB 1). • Packet Switched Core Network. The interval at which the UE periodically updates the Packet Switched Core

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 34 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Network (PS-CN) is set using the t3312 timer. This timer is set in the SGSN and sent to the UE via both the Attach and the Routing Area Update messages.

The following table provides parameter ranges and default values involved in getting the UE into Idle Mode. They are listed in the same order they were presented. The Level column indicates the network element that owns the parameter. The class column indicates if the parameter is set based on Policy (must be set this way), Fixed (recommended to be set this way) and Variable (set at your discretion).

5.2

Call Establishment

Given the UE has successfully entered Idle Mode; it must then be able to originate and terminate calls within acceptable Accessibility measures. This section considers all of the algorithms invoked during the process of establishing a call.

5.2.1 Radio Access Bearer A Radio Access Bearer (RAB) is a connection between the UE and the Mobile Switching Center (MSC) in the case of a Circuit Switched (CS) connection or between the UE and Serving GPRS Support Node (SGSN) in the case of a Packet Switched connection. There is also the possibility of the UE connecting to both the MSC and the SGSN as is the case in both SP0 and SP64. The Radio Access Bearer is set up according to the Requested Service after the Signaling Connection is established through a Signaling Radio Bearer. In the case of UE initiated connections where a Radio Access Bearer does not already exist, the Requested Service is sent in the Random Access CHannel (RACH) Message Part. Although the Requested Service could be sent by the UE, all Radio Access Bearers are actually initiated by the Core Network (CN). The variables within Quality of Service (QoS) fall into three main categories based upon the user’s need for guaranteed throughput and/or latency. The three categories are Conversational; which provides guaranteed low latency and throughput, Streaming; which provides guaranteed throughput but no guarantee for latency, and Interactive (also referred to as Background) which provides guarantees for neither throughput nor latency. Another variable determines which side of the Core Network is used. In general, all Packet Switched Radio Access Bearers are connected to the SGSN and all Circuit Switched Radio Access Bearers are connected to the MSC. The following types of Radio Access Bearers (RABs) are supported by the Ericsson UTRAN. • Conversational Circuit Switched Speech AMR 12.2kb. This is the typical Speech Radio Access Bearer. Given its Conversational Quality of Service (QoS) class, low latency and constant throughput are guaranteed. The Conversational class of service is Transparent, meaning that in order to keep latency as low as possible, there is no Transport layer Block retransmission service offered. • Conversational Circuit Switched Speech AMR 12.2kb plus Interactive Packet Switched 64/64. This type of Radio Access Bearer supports concurrent Circuit Switched Speech and Packet Switched Data. The Interactive Quality of Service (QoS) class Data connection can support a data rate of 64kb in the Uplink and 64kb in the downlink. Neither latency nor throughput is guaranteed for the Packet Switched connection. Ericsson refers to this type of Radio Access Bearer (RAB) as SP64. • Conversational Circuit Switched Speech AMR 12.2kb plus Interactive Packet Switched 64/HS. This type of Radio Access Bearer supports concurrent Circuit Switched Speech and Packet Switched Data. The Interactive

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 35 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Quality of Service (QoS) class Data connection can support a data rate of 64kb in the Uplink and HSDPA for the downlink. Neither latency nor throughput is guaranteed for the Packet Switched connection. • Conversational Circuit Switched Speech AMR 12.2kb plus Interactive Packet Switched 384/HS. This type of Radio Access Bearer supports concurrent Circuit Switched Speech and Packet Switched Data. The Interactive Quality of Service (QoS) class Data connection can support a data rate of 384kb in the Uplink and HSDPA for the downlink. Neither latency nor throughput is guaranteed for the Packet Switched connection. • Conversational Circuit Switched Speech AMR 12.2kb plus Interactive Packet Switched 0/0. This Radio Access Bearer (RAB) offers both Speech and a 0 bit rate Packet Switched connection. The 0 bit rate Packet Switched connection is used as a “stepping stone” between 64/64 and Idle Mode. The result is a reduction in latency from the end user’s perspective when using interactive applications such as Web Browsing. Ericsson refers to this type of Radio Access Bearer (RAB) as SP0. The availability of this Radio Access Bearer (RAB) is controlled through multiRabSp0Available [RNC, 1=TRUE, Binary, Fixed]. • Conversational Circuit Switched Data 64. This Radio Access Bearer (RAB) provides a Conversational class 64kb/s Unrestricted Digital Information (UDI) connection between the UE and the Circuit Switched Core Network. The Conversational class of service is Transparent, meaning that in order to keep latency as low as possible, there is no Transport layer Block retransmission service offered. • Conversational Circuit Switched Data 64 plus Interactive Packet Switched 8/8. This Radio Access Bearer (RAB) provides a Conversational class 64kb/s Unrestricted Digital Information (UDI) connection between the UE and the Circuit Switched Core Network plus an Interactive class 8kb uplink, 8kb downlink Packet Switched connection between the UE and Packet Switched Core Network. Ericsson refers to this type of Radio Access Bearer (RAB) as UDI8. The availability of this Radio Access Bearer (RAB) is controlled through multiRabUdi8Available [RNC, 0=FALSE, Binary, Fixed]. • Streaming Circuit Switched 57.6. This Radio Access Bearer (RAB) provides a Streaming class connection between the UE and Circuit Switched Core Network with guaranteed throughput of up to 57.6kb and guaranteed low latency. • Streaming Packet Switched 16/64. This Radio Access Bearer (RAB) provides a Streaming class connection between the UE and the Packet Switched Core Network with guaranteed throughput of up to 57.6kb on the downlink and 16kb in the uplink. Latency is not guaranteed. • Streaming Packet Switched 16/64 plus Interactive Packet Switched 8/8. This Radio Access Bearer (RAB) provides a Streaming class connection between the UE and the Packet Switched Core Network with guaranteed throughput of up to 57.6kb on the downlink and 16kb in the uplink plus an interactive class 8kb uplink, 8kb downlink Packet Switched connection between the UE and Packet Switched Core Network. Throughput is only guaranteed for the Streaming class connection. Latency is not guaranteed for either connection. • Streaming Packet Switched 16/128. This Radio Access Bearer (RAB) provides a Streaming class connection between the UE and the Packet Switched Core Network with guaranteed throughput of up to 112kb on the downlink and 16kb in the uplink. Latency is not guaranteed. • Streaming Packet Switched 16/128 plus Interactive Packet Switched 8/8. This Radio Access Bearer (RAB) provides a Streaming class connection between the UE and the Packet Switched Core Network with a guaranteed throughput of up to 112kb on the downlink and 16kb in the uplink plus an interactive class 8kb uplink, 8kb downlink Packet Switched connection between the UE and Packet Switched Core Network. Throughput is only guaranteed for the Streaming class connection. Latency is not guaranteed for either connection. The availability of this Radio Access Bearer (RAB) is controlled through psStreaming128 [RNC, 0=FALSE, Binary, Fixed]. • Interactive Packet Switched HSDPA with 384 uplink. This Radio Access Bearer provides an interactive connection between the UE and Packet Switched Core Network of 1.8Mb on the downlink and 384kb on the uplink. Neither latency nor throughput is guaranteed. The availability of this Radio Access Bearer (RAB) is controlled through allow384HsRab [RNC, 1=TRUE, Binary, Fixed]. • Interactive Packet Switched HSDPA with 64 uplink. This Radio Access Bearer provides an interactive connection between the UE and Packet Switched Core Network of 1.8Mb on the downlink and 64kb on the uplink. Neither latency nor throughput is guaranteed. • Interactive Packet Switched DCH/DCH. This Radio Access Bearer (RAB) provides an interactive connection between the UE and Packet Switched Core Network of 64kb, 128kb or 384kb on the uplink and 64kb, 128kb or 384kb on the downlink. Neither latency nor throughput is guaranteed. The initial Dedicated Channel (DCH)

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 36 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 selected for all non-HSDPA capable mobiles requesting a Packet Switched Interactive connection is 64/64. The availability of the 128/128 Radio Access Bearer (RAB) is controlled through state128_128Supported [RNC, 1=TRUE, Binary, Fixed]. • Interactive Packet Switched EUL/HS. This Radio Access Bearer (RAB) provides an interactive connection between the UE and Packet Switched Core Network using Enhanced Uplink (EUL) or HSUPA on the Uplink and HSDPA on the Downlink.

Ericsson supports many types of Radio Access Bearers (RABs) as shown above; however, our end to end network does not currently support Differentiated Service through the use of QoS profiles. Our current implementation supports only the following Radio Access Bearer (RAB) configurations. • Conversational Circuit Switched AMR 12.2kb for Speech. • Conversational Circuit Switched Speech AMR 12.2kb for Speech plus Interactive Packet Switched 64/64 or 0/0 (SP64/SP0). This is also referred to as MultiRAB. • Interactive Packet Switched 64/64 for non-HSDPA capable UEs. Up-switching allows for all combinations of 64, 128, and 384 on the Uplink and Downlink. Down-switching allows the use of common channels (RACH and FACH) for User Plane data. • Interactive Packet Switched 64kb or 384kb uplink with HSDPA downlink for UEs with HSDPA capability. • Interactive Packet Switched Enhanced Uplink (EUL) with HSDPA downlink for UEs with EUL/HS capability. • Conversational Circuit Switched Speech AMR 12.2kb for Speech plus Interactive Packet Switched 384kb or 64kb uplink with HSDPA downlink for UEs with HSDPA capability. This is also referred to as HS MultiRAB

5.2.2 Mobile Origination / Termination The establishment of a Radio Access Bearer (RAB) in the case of a Mobile Origination or Termination begins with either a RACH on the uplink, or a Page on the downlink. The establishment of an RRC Connection is identical to the process used in Figure 4 within the Idle Mode section except that the resulting Transparent Message Transfer connection between the UE and Core Network (CN) element specifies a Service Request for a User Plane connection. Based upon the type of Service requested, the Core Network Sends a RAB ASSIGNMENT REQUEST to the Serving Radio Network Controller (SRNC) indicating the RAB ID. The Serving Radio Network Controller (SRNC) determines the new Radio Connection based upon the type of Service Requested by the Core Network taking into consideration any existing Radio Connections between it and the UE. There are also functions as described in the following subsections that determine the treatment of the Service Request. Each is considered independent of the others. The parameters that guide the operation of each function are described within context.

5.2.2.1

Paging

There are two primary uses for paging. One is to inform UEs of an incoming call, the other is to inform UEs of new System Information broadcast on the Broadcast Control CHannel (BCCH). Pages for calls can be sent from either the Packet Switched or the Circuit Switched core network. A UE may be paged while it is in Idle Mode, CELL_FACH state or in CELL_DCH state. In Idle Mode, the Secondary Common Control Physical CHannel (S-CCPCH) and the Paging Indicator CHannel (PICH) are used. The Paging Indicator CHannel (PICH) power is set relative to the Primary Common Pilot CHannel (PCPICH) through pichPower [Cell, -7, dB, Fixed].

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 37 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 • The Secondary Common Control Physical CHannel (S-CCPCH) carries the Paging CHannel (PCH) logical channel. The Paging CHannel (PCH) power is set relative to the Primary Common Pilot CHannel (PCPICH) through pchPower [RNC, -4, 0.1dB, Fixed]. The Paging CHannel (PCH) is used to carry the Radio Resource Control (RRC) Message “Paging type 1” which carries the actual paging message from the Core Network. • In order to conserve UE battery life, the UE does not always read the Paging CHannel (PCH). The Paging Indicator CHannel (PICH) is used to indicate when the UE should read the Paging CHannel (PCH). Each Paging Indicator CHannel (PICH) frame consists of a number of Paging Indicators. The UEs are divided into a number of groups, and each group reads a specific Paging Indicator that tells if it should read the Paging CHannel (PCH). The interval at which the UE reads the Paging Indicator CHannel (PICH) is determined by its own International Mobile Subscriber Identity (IMSI) and the Discontinuous Reception (DRX) Cycle Length.

The Discontinuous Reception (DRX) Cycle Length = 2k * 10ms Where: • k = cnDrxCycleLengthCs [RNC, 7=1280, coeff, Fixed] for Circuit Switched services cnDrxCycleLengthPs [RNC, 7=1280, coeff, Fixed] for Packet Switched services and utranDrxCycleLength [RNC, 5=320, coeff, Fixed] for UEs in URA_PCH State. • 10ms is equal to the duration of a System Frame

In CELL_FACH state or in CELL_DCH state a connection exists between the UTRAN and the UE. The RRC message "Paging type 2" is used to carry paging information over the dedicated connection. The noOfPagingRecordTransm [RNC, 2, Integer, Fixed] controls the number of times a single page from the Core Network will be sent by the UTRAN. UEs in Idle Mode are informed of new System Information broadcast on the Broadcast Control CHannel (BCCH) through consecutive “Paging type 1” messages. The number of times a UE (that uses maximum possible DRX cycle length) hears the updated system information is defined by the parameter noOfMaxDrxCycles [RNC, 1, DRX cycles, Fixed].

5.2.2.2

Admission Control

Admission Control is a function that determines if a new radio link can be allowed on the cell given the cell’s current resource load. New radio links can be requested for Call Origination, Termination, Handover or when existing radio links are modified. Transport resources (Iub) are not considered during Admission Control procedures and as such do not have any affect on Admission Control.

When a request is made of Admission Control, Service Classes (Guaranteed, Guaranteed-HS and NonGuaranteed) and Setup Types (Handover and Non-Handover) are used to allow for prioritization among requests for different types of radio links. The following radio connection types (supported by AT&T) correspond to the Guaranteed Service Class: • Stand alone Signaling Radio Bearers (SRB) • Conversational Circuit Switched Speech AMR 12.2kb • Conversational Circuit Switched Speech AMR 12.2kb plus Interactive Packet Switched 0kb/0kb (SP0).

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 38 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

The following radio connection types (supported by AT&T) correspond to the Non-Guaranteed Service Class: • Interactive Packet Switched 64/64, 64/128, 128/128 and 64/384 • Conversational Circuit Switched Speech AMR 12.2 plus Interactive Packet Switched 64kb/64kb (SP64)

The following radio connection types (supported by AT&T) correspond to the Guaranteed-HS Service Class: • Interactive Packet Switched 384/HS • Interactive Packet Switched 64/HS • Conversational Circuit Switched Speech AMR 12.2kb for Speech plus Interactive Packet Switched 384kb or 64kb uplink with HSDPA for downlink

The first decisions made to admit or block Radio Link admission requests are based upon two algorithms that use the following two configurable parameters. See the figure below. • Admission Control blocks new radio link admission requests for HSDPA when the number of users assigned to the High Speed Downlink Shared CHannel (HS-DSCH) in the cell exceeds hsdpaUsersAdm [Cell, 10, Users, Var.]. This configurable parameter does not apply to requests made as a result of Cell Change (mobility). The total number of HS users in the cell is limited by maxNumHsdpaUsers [Cell, 16, Users, Var.]. • Admission Control blocks admission requests for a radio link in compressed mode when the current number of radio links exceeds compModeAdm [Cell, 15, Radio Links, Var.]. • Admission control will block admission for an E-DCH user requesting the cell as serving cell if the total number of serving cell E-DCH users including the requested is greater than eulServingCellUsersAdm [Cell, 4, E-DCH users, Fixed]. • Admission control will block admission for an E-DCH user requesting the cell as non-serving cell if the total number of non-serving cell E-DCH users including the requested is greater than eulNonServingCellUsersAdm [Cell, 10, E-DCH users, Fixed].

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 39 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Figure 5: Admission Control (Radio Link Request)

HS Call?

Y

# of HS users > hsdpaUsersAdm?

N Radio Link Request

N 1

Block!

N

In Compressed Mode?

Y

N

Y

# of RL > compModeAdm?

Y

In addition to specifying the Service Class and Setup Type, the Radio Link Request also includes an estimation of each of the following: • Number of downlink Channelization Codes • Usage of uplink and downlink Spreading Factors • Amount of downlink Non-HS Power • Number of uplink and downlink Air Speech Equivalents (ASE) • Amount of Node B Hardware utilized.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 40 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 • Downlink Channelization Codes. In order to reserve Channelization Codes for Handover, admission is blocked for all Guaranteed / Non-Handover and Guaranteed-HS / Non-Handover requests when Channelization Code utilization exceeds dlCodeAdm [Cell, 70, %, Var.] of the total Channelization Codes in the cell. Furthermore, NonGuaranteed / Non-Handover admission requests are blocked when Channelization Code utilization exceeds dlCodeAdm [Cell, 70, %, Var.] – beMarginDlCode [Cell, 1, 5%, Var.] of the total Channelization Codes in the cell. See the figure below.

Figure 6: Admission Control (DL Channelization) 1

Y

Handover?

N

Admit!

N

Guaranteed or Guaranteed HS?

Y

Channelization Code % Utilization > dlCodeAdm?

Y

N (Non-Guaranteed)

Channelization Code % utilization > dlCodeAdm beMarginDlCode ?

Y

Block!

N Admit!

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 41 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 • Uplink and Downlink Spreading Factor usage. The Histogram Monitor keeps track of Spreading Factor usage in the uplink and downlink. It also measures the number of Compressed Mode radio links and the number of HS serving radio links in the cell in order to allow or deny requests for either Handover or Non-Handover based upon Spreading Factor utilization. • Non-Guaranteed admission requests of Spreading Factor 8 in the downlink are denied when the use of Spreading Factor 8 exceeds sf8Adm [Cell, 8, Radio Links, Fixed]. The 384kb Radio Access Bearer uses Spreading Factor 8 on the downlink. • Non-Guaranteed admission requests of Spreading Factor 16 in the downlink are denied when the use of Spreading Factor 16 exceeds sf16Adm [Cell, 16, Radio Links, Var.]. The 128kb Radio Access Bearer uses Spreading Factor 16 on the downlink. • Non-Guaranteed admission requests of Spreading Factor 32 in the downlink are denied when the use of Spreading Factor 32 exceeds sf32Adm [Cell, 32, Radio Links, Var.]. The 64kb Radio Access Bearer uses Spreading Factor 32 on the downlink. • Guaranteed admission requests of Spreading Factor 16 in the downlink are denied when the use of Spreading Factor 16 (Streaming 16kb/128kb) exceeds sf16gAdm [Cell, 16, Radio Links, Var.]. However, AT&T does not currently support any Guaranteed Radio Access Bearers that use Spreading Factor 16. • Guaranteed HS or Non-Guaranteed admission requests of Spreading Factor 16 in the uplink (64kb) are denied when the use of Spreading Factor 16 in the uplink exceeds sf16AdmUl [Cell, 50, Radio Links, Var.]. • Guaranteed HS or Non-Guaranteed admission requests of Spreading Factor 8 in the uplink (128kb) are denied when the use of Spreading Factor 8 in the uplink exceeds sf8AdmUl [Cell, 8, Radio Links, Var.]. • Guaranteed HS admission requests of Spreading Factor 4 in the uplink (384kb) are denied when the use of Spreading Factor 4 in the uplink exceeds sf4AdmUl [Cell, 6, Radio Links, Var.].

The sf4AdmUl [Cell, 6, Radio Links, Var.] parameter is Cell based relative to the RNC based allow384HsRab [RNC, 1=TRUE, Binary, Fixed] parameter. Given this, the number of cells where 384kb/HSDPA is possible within the RNC can be controlled.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 42 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Figure 7: Admission Control (Spreading Factor Usage) SF 8s (384k) in DL > sf8Adm?

Y

N SF 16s (128k) in DL > sf16Adm?

Y

N SF 32s (64k) in DL > sf32Adm?

Y Admit!

N SF 16s (64k) in UL > sf16AdmUl?

Block!

Y

N SF 4s (128) in UL > sf8AdmUl?

Y

N SF 4s (384) in UL > sf4AdmUl?

Y

• Downlink Non-HS Power / Soft Congestion. Downlink power utilization is measured in the cell. In addition to Admission Control taking the following actions based upon Downlink power utilization, a Soft Congestion mechanism is triggered. Upon Admission Control blocking a non 384kb Downlink Admission request, the mechanism Down-Switches the Downlink for one existing Non-Guaranteed Service Class connection to the next lowest rate. 384kb Downlink Radio Access Bearer (RAB) requests do not trigger Down-Switches since all 384kb Radio Access Bearers (RABs) result from Up-Switches and under Congested conditions, the Up-Switch request would be blocked. • Transmitted Code Power utilization is monitored and admission is blocked for all Guaranteed / Non-Handover and Non-Guaranteed / Handover requests when the Transmitted Code Power utilization exceeds pwrAdm [Cell, 75, %, Var.] of maximumTransmissionPower [Cell, 400, 0.1dBm, Var.] which sets the maximum power available in the cell at the Reference Point (antenna connector). • Non-Guaranteed / Non-Handover admission requests are blocked when the downlink transmitted carrier power utilization exceeds pwrAdm [Cell, 75, %, Var.] – beMarginDlPwr [Cell, 10, %, Var.] of maximumTransmissionPower [Cell, 400, 0.1dBm, Var.]. • Guaranteed / Handover and Guaranteed-HS / are allowed up to the limit set by pwrAdm [Cell, 75, %, Var.] + pwrAdmOffset [Cell, 10, %, Var.] of maximumTransmissionPower [Cell, 400, 0.1dBm, Var.].

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 43 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Figure 8: Admission Control (DL Power)

1

Guaranteed / Non-HO or Non-Guaranteed / HO?

Y

Code Power > pwrAdm % of maximumTransmissionPower ?

N

Y

N Admit! N

Non-Guaranteed / NonHandover?

Y

N (Guaranteed / Handover or Guaranteed HS / )

Code Power > pwrAdm % + pwrAdmOffset % of maximumTransmissionPower ?

Code Power > pwrAdm % - beMarginDlPwr % of maximumTransmissionPower ?

Y

Y

Block!

N Admit! • Air Speech Equivalent (ASE). The Air Speech Equivalent (ASE) Admission Policy is used to control the load in both the uplink and the downlink. The table below shows the number of Air Speech Equivalents (ASEs) per AT&T supported Radio Access Bearer (RAB).

Table 14: Air Speech Equivalents (ASE) Radio Connection Type

ND-00150 Rev. 3.0 09/09/2007

ASEs

Signaling Radio Bearer

0.61

Conversational Circuit Switched Speech AMR 12.2kb

1.61

Interactive Packet Switched 64kb (UL or DL)

8.32

Interactive Packet Switched 128kb (UL or DL)

16.03

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 44 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Interactive Packet Switched 384kb (UL for HS or DL)

40.27

HS for Downlink – A-DCH only

0.61

Multi RAB 64/64 (UL and DL)

9.32

Multi RAB HS 64/HS

9.32 / 1.61

Multi RAB HS 384/HS

41.27 / 1.61

The Air Speech Equivalent (ASE) provides a unit of Uu interface load. Through its use in the Admission Control algorithm, increases in noise in the uplink and downlink as a function of loading can be considered before the Radio Link is established. • For the Uplink, the Air Speech Equivalent (ASE) is monitored and admission is blocked for all Guaranteed / Non-Handover, Non-Guaranteed / Handover and Guaranteed-HS / Non-Handover requests when the number of Air Speech Equivalents exceeds aseUlAdm [Cell, 500, ASE, Var.]. Non-Guaranteed / Non-Handover requests are blocked when the number of Air Speech Equivalents exceeds aseUlAdm [Cell, 500, ASE, Var.] - beMarginAseUl [Cell, 0, ASE, Var.]. Guaranteed / Handover and Guaranteed-HS / Handover requests are blocked when the number of Air Speech Equivalents exceeds aseUlAdm [Cell, 500, ASE, Var.] + aseUlAdmOffset [Cell, 40, ASE, Var.]. See the figure below.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 45 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Figure 9: Admission Control (Uplink ASE Utilization) 1

Guaranteed / Non-HO, Non-Guaranteed / HO or Guaranteed-HS / NonHO?

Y

# of ASEs > aseUlAdm?

Y

N

N

Admit! N Non-Guaranteed / NonHandover?

Y

# of ASEs > aseUlAdm beMarginAseUl?

Y

N (Guaranteed / Handover or Guaranteed HS / Handover)

# of ASEs > aseUlAdm + aseUlAdmOffset?

Y

Block!

N Admit! • For the Downlink, the Air Speech Equivalent (ASE) is monitored and admission is blocked for all NonGuaranteed / Handover, Guaranteed / and Guaranteed-HS / requests when the number of Air Speech Equivalents exceeds aseDlAdm [Cell, 500, ASE, Var.]. Non-Guaranteed / Non-Handover requests are blocked when the number of Air Speech Equivalents exceeds aseDlAdm [Cell, 500, ASE, Var.] – beMarginAseDl [Cell, 0, ASE, Var.]. See the figure below.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 46 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Figure 10: Admission Control (Downlink ASE Utilization) 1

Non-Guaranteed / HO, Guaranteed / or Guaranteed-HS / ?

Y

N (Non-Guaranteed / Non-

# of ASEs > aseDlAdm?

Y

N

Handover)

Admit!

# of ASEs > aseDlAdm beMarginAseDl?

Y

Block!

N Admit!

• Node B Hardware utilized. The Hardware Monitor provides Admission Control based upon an estimation of the hardware (Channel Elements) utilized in the Uplink and Downlink. • For the Uplink, the Hardware Utilization is monitored and admission is blocked for all Guaranteed / NonHandover, Non-Guaranteed / Handover and Guaranteed-HS / Non-Handover requests when the percent of Uplink Hardware Utilized exceeds ulHwAdm [Site, 80, %, Var.]. Non-Guaranteed / Non-Handover requests are blocked when the percent of Uplink Hardware Utilized exceeds ulHwAdm [Site, 80, %, Var.] – beMarginUlHw [Site, 0, %, Var.]. Guaranteed / Handover and Guaranteed-HS / Handover requests are blocked when the percent of Uplink Hardware Utilized arrives at 100%. See the figure below.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 47 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Figure 11: Admission Control (Uplink Hardware Utilization) 1

Guaranteed / Non-HO, Non-Guaranteed / HO or Guaranteed-HS / NonHO?

Y

% UL HW utilization > ulHwAdm?

Y

N

N

Admit! N Non-Guaranteed / NonHandover?

Y

% UL HW utilization > ulHwAdm - beMarginUlHw?

Y

N (Guaranteed / Handover or Guaranteed HS / Handover)

Admit until 100% of UL HW is utilized!

Block!

• For the Downlink, the Hardware Utilization is monitored and admission is blocked for all Guaranteed / NonHandover, Non-Guaranteed / Handover and Guaranteed-HS / Non-Handover requests when the percent of Downlink Hardware Utilized exceeds dlHwAdm [Site, 100, %, Var.]. Non-Guaranteed / Non-Handover requests are blocked when the percent of Downlink Hardware Utilized exceeds dlHwAdm [Site, 100, %, Var.] – beMarginDlHw [Site, 0, %, Var.]. Guaranteed / Handover and Guaranteed-HS / Handover requests are blocked when the percent of Downlink Hardware Utilized arrives at 100%. See the figure below.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 48 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Figure 12: Admission Control (Downlink Hardware Utilization) 1

Guaranteed / Non-HO, Non-Guaranteed / HO or Guaranteed-HS / NonHO?

Y

% DL HW utilization > dlHwAdm?

Y

N

N

Admit! N Non-Guaranteed / NonHandover?

Y

% DL HW utilization > dlHwAdm - beMarginDlHw?

Y

N (Guaranteed / Handover or Guaranteed HS / Handover)

Admit until 100% of DL HW is utilized!

5.2.2.3

Block!

Emergency Call Redirect to 2G for Speech

If emergencyCallRedirect [RNC, 1=TRUE, Binary, Fixed] is set to TRUE, an emergency (911) call made by a UE on the UMTS network will be redirected to GSM. The call will be established on the GSM network after Cell Selection on the GSM network has taken place. This procedure is applied when there is no existing Radio Connection. If there is an existing connection between the UE and Packet Switched Core Network, the 911 call will be placed through the 3G network. In this case, only the Cell ID of the serving cell will be used for location purposes. The current recommendation is to enable this capability by setting emergencyCallRedirect [RNC, 1=TRUE, Binary, Fixed] to TRUE due to the fact that the E911 solution for WCDMA does not provide the level of location detection accuracy provided by the GSM solution.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 49 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.2.2.4

Uplink Pathloss Threshold for 384/HS

If Admission Control grants the request, and if ulPathlossCheckEnabled [Cell, FALSE, String, Var.] is set to TRUE, the amount of Uplink pathloss for a 384/HS Radio Access Bearer (RAB) request is determined. If the Uplink pathloss is greater than sf4UlPathlossThreshold [Cell, 170, dB, Var.] , then a 64k uplink Radio Access Bearer (RAB) is used instead of a 384kb Radio Access Bearer (RAB). This check only occurs at establishment and therefore is technically not a Down-Switch. However, it can be used to limit the number of HS capable UEs in 384kb uplink soft handover at the cell edge.

5.2.2.5

Directed Retry to GSM for Speech

Speech requests without ongoing packet connections (Multi-RAB) are considered for Directed Retry to GSM during RAB establishment based upon the setting of loadSharingDirRetryEnabled [RNC, 0=FALSE, Binary, Fixed]. If this configurable parameter is set to TRUE, and the WCDMA cell exceeds loadSharingGsmThreshold [Cell, 100, %, Fixed] of pwrAdm [Cell, 75, %, Var.], the UTRAN requests a blind inter-RAT handover for loadSharingGsmFraction [Cell, 100, %, Fixed] of the Directed Retry candidates to the directedRetryTarget [Cell, N/A, N/A, Var.] configured GSM cell via the core network. The current recommendation is to disable this capability by setting loadSharingDirRetryEnabled [RNC, 0=FALSE, Binary, Fixed] to FALSE. All other parameters associated with this function are simply defaulted.

5.2.2.6

Inter-Frequency Load Sharing

If multiple UARFCNs are available at a given Node B loadSharingRrcEnabled [RNC, 0=FALSE, Binary, Fixed] is set the TRUE, Inter-Frequency Load Sharing will determine if the WCDMA cell exceeds loadSharingMargin [Cell, 0, %, Fixed] of pwrAdm [Cell, 75, %, Var.] at each call setup during Radio Resource Control (RRC) Connection Establishment. If the cell exceeds loadSharingMargin [Cell, 0, %, Fixed] of pwrAdm [Cell, 75, %, Var.], the UE will be directed to the UARFCN defined by the InterFrequency load sharing neighbor as indicated by the loadSharingCandidate [Nabr, N/A, N/A, Var.] flag. The current recommendation is to disable this capability by setting loadSharingRrcEnabled [RNC, 0=FALSE, Binary, Fixed] to FALSE. All other parameters associated with this function are simply defaulted.

5.2.2.7

Packet Switched RAB Determination

If the Service requested of the UTRAN is Interactive Packet Switched and the UE is HSDPA capable: • The Radio Access Bearer options are 384/HS (if allow384HsRab [RNC, 1=TRUE, Binary, Fixed] is set to TRUE) or 64/HS. The UE is then assigned based upon the setting of hsOnlyBestCell [RNC, 1=TRUE, Binary, Fixed] to the best cell in the Active Set.

The current recommendation is to set the value of hsOnlyBestCell [RNC, 1=TRUE, Binary, Fixed] to TRUE thereby allowing HSDPA to be supported on the best cell in the Active Set.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 50 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

If the Service requested of the UTRAN is Interactive Packet Switched and the UE is not HS capable, packetEstMode [RNC, 1, Integer, Fixed] is used. • If packetEstMode [RNC, 1, Integer, Fixed] =0, the attempt will be made to allocate the UE on RACH/FACH. • If packetEstMode [RNC, 1, Integer, Fixed] =1, the attempt will be made to allocate the UE on 64/64. • If packetEstMode [RNC, 1, Integer, Fixed] =2, then an attempt will be made to allocate the UE on 64/64, but if Admission Control blocks the assignment to a 64/64, the UE is sent to RACH/FACH.

The current recommendation is to set the value of packetEstMode [RNC, 1, Integer, Fixed] =2 thereby allowing an attempt at a 64kb/64kb Radio Access Bearer with fallback to RACH/FACH if you are denied.

The following table provides parameter ranges and default values involved Establishing a Call. They are listed in the same order they were presented. The Level column indicates the network element that owns the parameter. The class column indicates if the parameter is set based on Policy (must be set this way), Fixed (recommended to be set this way) and Variable (set at your discretion).

5.2.2.8

Active Queue Management (AQM)

Active Queue Management improves throughput for TCP based applications by selectively dropping packets when queues begin to reach overflow thus reducing the probability of the overflow occurring. The capability is controlled by the configurable parameter activeQueueMgmt [RNC, 0=OFF, Binary, Fixed].

5.3

Mobility and Connection Management

This section contains the protocols and configurable parameters involved in maintaining a call once it has been established. Measurement Fundamentals as they apply to Mobility Management and Power Control are explained. Intra-RAT (UMTS) and Inter-RAT (UMTS to GSM) Idle Mode Cell Reselection, Connected Mode Handover (including Inter-RAT) and HSDPA Cell Change are covered. Channel Switching and Congestion Control as they occur after Call Establishment are also included.

5.3.1 Measurement Fundamentals Primary Common Pilot Channel (P-CPICH) Ec/No, Primary Common Pilot Channel (P-CPICH), Received Signal Code Power (RSCP) and UE Transmitted power are the quantities measured by the UE that when certain conditions are met; trigger events that may lead to one of the following: • Cell Reselection in Idle Mode or CELL_FACH (intra or inter RAT) • Handover in Connected Mode (CELL_DCH) (intra or inter RAT) • HS Cell Change (intra or inter RAT)

CPICH Ec/No and CPICH RSCP are explained in the Design Criteria section.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 51 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.2 Cell Reselection in Idle Mode or CELL_FACH In Idle Mode, the UE maintains a relationship with both sides of the Core Network (PS and CS) in order to allow for the establishment of calls. First, an event has to be triggered based upon configurable parameters sent in System Information Block (SIB), then the Cell Reselection candidates are ranked according to signal level and quality. In CELL_FACH, the UE is actually Connected Mode but is using Common Channels to relay User Plane data.

5.3.2.1

Idle Mode Cell Reselection Triggers

When in Idle Mode, URA_PCH or CELL_FACH, the UE communicates with one serving cell (no Soft Handover). The UE “camps” on this cell until one of the following triggers occurs: • The cell is no longer suitable in terms of signal level (Srxlev) and quality (Squal). See “Camping on a Suitable Cell” in the Idle Mode section. • The quality (Squal) of the serving cell falls below sIntraSearch [Cell, 22=10, dB, Fixed] at which point the UE will search for a better quality Intra-Frequency cell. • If Inter-Frequency neighbors are assigned to the cell and the quality (Squal) of the serving cell falls below sInterSearch [Cell, 0, dB, Fixed]. If there are no Inter-Frequency neighbors defined on the cell, the setting of sInterSearch [Cell, 0, dB, Fixed] has no impact. • If Inter-RAT neighbors are assigned to the cell and either of the following two conditions are met: • The serving cell’s CPICH Ec/No becomes equal to or below qQualMin [Cell, -19, dB, Fixed] + sRatSearch [Cell, 4, dB, Fixed]. • The serving cell’s CPICH RSCP becomes equal to or below qRxLevMin [Cell, -115, dBm, Fixed] + sHcsRat [Cell, -105, dB, Fixed]. Negative values for sHcsRat [Cell, -105, dB, Fixed] are interpreted by the UE as 0. • If there are no Inter-RAT neighbors defined on the cell, the settings of sRatSearch [Cell, 4, dB, Fixed] and sHcsRat [Cell, -105, dB, Fixed] have no impact.

The sHcsRat [Cell, -105, dB, Fixed] functionality is supported by CR130 which was implemented in the Qualcomm chipset in October of 2006. As such, it will not be advantageous to utilize sHcsRat [Cell, 105, dB, Fixed] until most of the UE in production support it.

If interFreqFddMeasIndicator [Cell, 0=FALSE, Binary, Fixed] is set to TRUE, a UE in CELL_FACH will evaluate Inter-Frequency and Inter-RAT neighbors using the same triggering mechanism used in Idle Mode. The UE performs Inter-frequency and Inter-RAT measurements during FACH measurement occasions. FACH measurement occasions are defined as being the frames where the following equation is fulfilled. SFN = C-RNTI mod n * 2k Where: • SFN is the System Frame Number • C-RNTI is the Cell Radio Network Temporary Identity • n is 0, 1, 2 etc. • k is fachMeasOccaCycLenCoeff [Cell, 4, Integer, Fixed]

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 52 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.2.2

Candidate Ranking

After the UE has been triggered to perform measurements, the measurements that satisfy the Cell Selection S criteria (Squal and Srxlev are positive for UMTS neighbors or only Srxlev is positive for GSM neighbors) are ranked according to the R criteria. R(s) = Qmeas(s) + qHyst(s) R(n) = Qmeas(n) - qOffset(s,n) Where: • s is the serving cell • n is the neighbor cell • Qmeas is either the CPICH RSCP (qualMeasQuantity [Cell, 2=CPICH_EC_NO, String, Fixed] =CPICH_RSCP) or the CPICH Ec/No (qualMeasQuantity [Cell, 2=CPICH_EC_NO, String, Fixed] =CPICH_EC_NO) of the neighboring UMTS cell. The ranking for a GSM neighbor is always done using the serving cell’s CPICH RSCP and the neighboring GSM cell’s Received Signal Level. • qHyst(s) is a hysteresis value read in System Information Block (SIB) 3 based upon qHyst1 [Cell, 2, dB, Fixed] if qualMeasQuantity [Cell, 2=CPICH_EC_NO, String, Fixed] =CPICH_RSCP or qHyst2 [Cell, 2, dB, Fixed] if qualMeasQuantity [Cell, 2=CPICH_EC_NO, String, Fixed] =CPICH_EC_NO. • qOffset is an offset between the serving cell and the neighboring cell that can be used to adjust the border between the two cells. The parameter is set per neighbor using qOffset1sn if qualMeasQuantity [Cell, 2=CPICH_EC_NO, String, Fixed] =CPICH_RSCP or qOffset2sn [Nabr, 0, dB, Fixed] if qualMeasQuantity [Cell, 2=CPICH_EC_NO, String, Fixed] =CPICH_EC_NO. qOffset1sn(UtranRelation) [Nabr, 0, dB, Fixed] is used for Intra-Frequency neighbor relationships, and qOffset1sn(GsmRelation) [Nabr, 7, dB, Fixed] is used for Inter-RAT or neighbor relationships.

The initial ranking is done using the measurement quantity CPICH RSCP. • If a GSM cell is ranked better than the serving cell for the time interval treSelection [Cell, 1, seconds, Fixed], the UE performs Cell Reselection to that cell. • If a UMTS cell is ranked better than the serving cell for the time interval treSelection [Cell, 1, seconds, Fixed] one of the following two possibilities will occur: • If the measurement quantity for Cell Reselection is set to CPICH RSCP (qualMeasQuantity [Cell, 2=CPICH_EC_NO, String, Fixed]), the UE performs Cell Reselection. • If the measurement quantity for Cell Reselection is set to CPICH Ec/No (qualMeasQuantity [Cell, 2=CPICH_EC_NO, String, Fixed]), the UE performs a second ranking of the UMTS cells based on CPICH Ec/No and performs Cell Reselection to the best quality cell.

5.3.3 Handover in Connected Mode (CELL_DCH) – Intra-Frequency Immediately after Call Setup, a UE is served by only one site. During RRC Connection Establishment the Serving Radio Network Controller (SRNC) sends the UE a MEASURMENT CONTROL message containing a list of neighbors and parameters values used to trigger neighbor measurements. This information was also sent in System Information Blocks (SIBs) 11 and 12 while the UE was in Idle Mode, so the UE has the information it needs in order to make neighbor measurements before it receives a MEASURMENT CONTROL message. In Connected Mode, the UE continuously measures the Primary Common Pilot Channel (P-CPICH) Ec/No of all the cells in its Active Set (cells that are in soft handover), Monitored Set (cells which are on the neighbor list, but are not in soft handover) and Detected Set (cells that are not in the neighbor list).

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 53 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

The UE Filters, Offsets and Weights the measurements to ensure the criteria for one of the following Events are met. If one of the criteria is met, the UE sends a MEASUREMENT REPORT to the RNC. • Active Set Addition (Event 1a) • Active Set Deletion (Event 1b) • Active Set Replacement of worst cell (Event 1c) • Change of Best Cell (Event 1d)

5.3.3.1

Active Set Addition (Event 1a)

If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) Ec/No of a cell not in the Active Set becomes greater than the Best Cell in the Active Set by reportingRange1a [RNC, 6, 0.5dB, Fixed] + hysteresis1a [RNC, 0, 0.5dB, Fixed] / 2, for a time equal to timeToTrigger1a [RNC, 11=320, ms, Fixed] , then event 1a occurs. The UE then sends a MEASUREMENT REPORT message for event 1a to the Serving Radio Network Controller (SRNC). If the number of cells in the Active Set is less than maxActiveSet [RNC, 3, Radio Links, Fixed], the cell is considered for addition to the Active Set. If the number of cells in the Active Set is equal to maxActiveSet [RNC, 3, Radio Links, Fixed], then the cell is proposed as a replacement for the cell with the worst quality in the Active Set. If the cell under consideration is not in the Monitored Set (not a configured neighbor), and its CPICH Ec/No is more than releaseConnOffset [RNC, 120, 0.1dB, Fixed] greater than the Best Cell in the Active Set, the call is disconnected. This is done to protect surrounding cells from Uplink interference. The UE will continue to send the event 1a MEASUREMENT REPORT each reportingInterval1a [RNC, 3=1, seconds, Fixed] until the Active Set is updated or the condition responsible for triggering the event is no longer valid. Figure 13: Event 1a Trigger CPICH Ec/No Best Cell

Candidate Cell

hysteresis1a

reportingRange1a

Time

timeToTrigger1a

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

MEASUREMENT REPORT to RNC

Page 54 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.3.2

Active Set Deletion (Event 1b)

If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) Ec/No (if measQuantity1 [Cell, 2=CPICH_EC_NO, String, Fixed] = CPICH_EC_NO or RSCP if measQuantity1 [Cell, 2=CPICH_EC_NO, String, Fixed] = CPICH_RSCP) of one of the cells in the Active Set becomes less than the Best Cell in the Active Set by reportingRange1b [RNC, 10, 0.5dB, Fixed] - hysteresis1b [RNC, 0, 0.5dB, Fixed] / 2, for a time equal to timeToTrigger1b [RNC, 12=640, ms, Fixed] , then event 1b occurs. The UE then sends a MEASUREMENT REPORT message for event 1b to the Serving Radio Network Controller (SRNC). The cell is then removed from the Active Set. If the call is supporting HSDPA, then Event 1b might also trigger a change of the Serving HS cell. Figure 14: Event 1b Trigger CPICH Ec/No Best Cell

reportingRange1b

Cell in the Active Set

hysteresis1b

MEASUREMENT REPORT to RNC

timeToTrigger1b

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 55 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.3.3

Active Set Replacement of worst cell (Event 1c)

If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) Ec/No (if measQuantity1 [Cell, 2=CPICH_EC_NO, String, Fixed] = CPICH_EC_NO or RSCP if measQuantity1 [Cell, 2=CPICH_EC_NO, String, Fixed] = CPICH_RSCP) of a cell not in the Active Set becomes greater than the Worst Cell in the Active Set by hysteresis1c [RNC, 2, 0.5dB, Fixed] / 2, for a time equal to timeToTrigger1c [RNC, 11=320, ms, Fixed] , and the number of cells in the Active Set is equal to maxActiveSet [RNC, 3, Radio Links, Fixed] , then event 1c occurs. The UE then sends a MEASUREMENT REPORT message for event 1c to the Serving Radio Network Controller (SRNC) and the cell is proposed as a replacement for the cell with the worst quality in the Active Set. If the cell under consideration is not in the Monitored Set (not a configured neighbor), and its CPICH Ec/No is more than releaseConnOffset [RNC, 120, 0.1dB, Fixed] greater than the Best Cell in the Active Set, the call is disconnected. This is done to protect surrounding cells from Uplink interference. The UE will continue to send the event 1c MEASUREMENT REPORT each reportingInterval1c [RNC, 3=1, seconds, Fixed] until the Active Set is updated or the condition responsible for triggering the event is no longer valid. If the call is supporting HSDPA, then Event 1c might also trigger a change of the Serving HS cell. Figure 15: Event 1c Trigger CPICH Ec/No Best Cell

New Cell

hysteresis1c

Worst Cell in AS

timeToTrigger1c

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

MEASUREMENT REPORT to RNC

Page 56 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.3.4

Change of Best Cell (Event 1d)

If the Filtered and Offset Primary Common Pilot Channel (P-CPICH) Ec/No of any cell in the Active Set becomes greater than the Best Cell in the Active Set by hysteresis1d [RNC, 15, 0.5dB, Fixed] / 2, for a time equal to timeToTrigger1d [RNC, 14=2560, ms, Fixed] , then event 1d occurs. The UE then sends a MEASUREMENT REPORT message for event 1d to the Serving Radio Network Controller (SRNC). Figure 16: Event 1d Trigger CPICH Ec/No Best Cell

Another Cell in AS

hysteresis1d

MEASUREMENT REPORT to RNC

timeToTrigger1d

5.3.3.5

Filtering, Offsetting and Weighting for Intra-Frequency measurements

Filtering: Before Events 1a, 1b, 1c or 1d can occur, the measurements made by the UE are Filtered according to the formula below: Fn = (1-a) F n-1 + a M n Where: • Fn = The updated measurement. • Fn-1 = the last (old) filtered measurement result. • Mn = the Ec/No as measured by the UE. • a = 1/2(k/2) where k is filterCoefficient1 [RNC, 2, coeff, Fixed].

Offsetting: The updated measurement (Fn) is then offset by individualOffset(UtranCell) [Cell, 0, 0.5dB, Fixed].

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 57 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Weighting: For Events 1a, and 1b, w1a [RNC, 0, 0.1unit, Fixed] and w1b [RNC, 0, 0.1unit, Fixed] respectively can be added in order to give heavier weight to cells in the Active Set that are not the best cell in the Active Set.

5.3.4 Handover in Connected Mode (CELL_DCH) – Inter-Frequency or Inter-RAT In Connected Mode, the UE continuously measures the Primary Common Pilot Channel (P-CPICH) Ec/No and Primary Common Pilot Channel (P-CPICH) RSCP of the Best Cell in the Active Set. When one of the following Events occurs, the UE is commanded to either start or stop Compressed Mode (CM) measurements for either Inter-RAT or Inter-Frequency neighbors. The UE Filters, Offsets and Weights the measurements to ensure the criteria for one of the following Events are met. If one of the criteria is met, the UE sends a MEASUREMENT REPORT to the RNC. • Current Used Frequency is Below Threshold (Event 2d) – Begin CM • Current Used Frequency is Above Threshold (Event 2f) – Cease CM • UE Transmit power is Above Threshold (Event 6d) – Begin CM • UE Transmit power is Below Threshold (Event 6b) – Cease CM

The Serving RNC then determines whether the UE makes Compressed Mode (CM) messages on InterFrequency or Inter-RAT neighbors based upon configurable parameters. Lastly, upon receiving the MEASUREMENT REPORT from the UE, the Serving RNC sends a MEASUREMENT CONTROL message to the UE with additional Event based criteria that the UE will use to evaluate its Inter-Frequency or Inter-RAT neighbors. If hsToDchTrigger(poorQualityDetected) [RNC, 1=TRUE, Binary, Fixed] is set to 1=ON, UEs with HSDPA capability will be Down-Switched to an Interactive Packet Switched 64/64 Radio Access Bearer (RAB) for Compressed Mode measurements. If hsToDchTrigger(poorQualityDetected) [RNC, 1=TRUE, Binary, Fixed] is set to 0=OFF, HSDPA capable UEs could drop due to their not being allowed to make Compressed Mode measurements.

The following describes the triggering and evaluation mechanism involved in Inter-Frequency and InterRAT Handover. The Handover algorithm is the same for Speech and Interactive Packet Switched R99 Data. All Interactive Packet Switched R99 Data connections are Down-Switched to Interactive Packet Switched 64/64 to order to make Compressed Mode (CM) measurements.

5.3.4.1

Begin Compressed Mode – Current Used Frequency is Below Threshold (Event 2d)

For Cells that meet the hho (section 1.7) criteria: If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) Ec/No of the Best Cell in the Active Set becomes less than the absolute threshold usedFreqThresh2dEcno(hho) [Cell, -12, dB, Fixed] - hysteresis2d [RNC, 4, 0.5 dB, Fixed] / 2, for a time equal to timeToTrigger2dEcno [RNC, 320, ms, Fixed] , or if the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) RSCP of the Best Cell in the Active Set becomes less than the absolute threshold usedFreqThresh2dRscp(hho) [Cell, -106 ±4, dBm, Fixed] hysteresis2d [RNC, 4, 0.5 dB, Fixed] / 2, for a time equal to timeToTrigger2dRscp [RNC, 320, ms, Fixed] , then event 2d occurs. The UE then sends a MEASUREMENT REPORT message for event 2d to

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 58 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

the Serving Radio Network Controller (SRNC). When the Serving Radio Network Controller (SRNC) receives event 2d, it commands the UE to begin Compressed Mode measurements. For Cells that meet the sho (section 1.7) criteria: If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) Ec/No of the Best Cell in the Active Set becomes less than the absolute threshold usedFreqThresh2dEcno(sho) [Cell, -15, dB, Fixed] - hysteresis2d [RNC, 4, 0.5 dB, Fixed] / 2, for a time equal to timeToTrigger2dEcno [RNC, 320, ms, Fixed] , or if the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) RSCP of the Best Cell in the Active Set becomes less than the absolute threshold usedFreqThresh2dRscp(sho) [Cell, -112, dBm, Fixed] - hysteresis2d [RNC, 4, 0.5 dB, Fixed] / 2, for a time equal to timeToTrigger2dRscp [RNC, 320, ms, Fixed] , then event 2d occurs. The UE then sends a MEASUREMENT REPORT message for event 2d to the Serving Radio Network Controller (SRNC). When the Serving Radio Network Controller (SRNC) receives event 2d, it commands the UE to begin Compressed Mode measurements. Figure 17: Event 2d Trigger (Begin Compressed Mode) CPICH Ec/No or CPICH RSCP

hysteresis2d

Best Cell in the Active Set

usedFreqThresh2dEcno or usedFreqThresh2dRscp

MEASUREMENT REPORT to RNC

timeToTrigger2dEcno or timeToTrigger2dRscp

For this section of the document, usedFreqThresh2dEcno and usedFreqThresh2dRscp apply when the UE is served by its Serving Radio Network Controller (SRNC). These parameters do not apply if the UE is served by a Drift Radio Network Controller (DRNC). For cases wherein the UE is served by a Drift Radio Network Controller (DRNC), usedFreqThresh2dEcnoDrnc [RNC, -12, dB, Fixed] and usedFreqThresh2dRscpDrnc [RNC, -106, dBm, Fixed] as configured on the SRNC apply.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 59 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.4.2

Cease Compressed Mode – Current Used Frequency is Above Threshold (Event 2f)

If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) Ec/No of the Best Cell in the Active Set becomes greater than the absolute threshold usedFreqRelThresh2fEcno [RNC, 2, dB, Fixed] + usedFreqThresh2dEcno + hysteresis2f [RNC, 2, 0.5dB, Fixed] / 2, for a time equal to timeToTrigger2fEcno [RNC, 640, ms, Fixed] , and the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) RSCP of the Best Cell in the Active Set is greater than the relative threshold usedFreqRelThresh2fRscp [RNC, 6, dB, Fixed] + usedFreqThresh2dRscp + hysteresis2f [RNC, 2, 0.5dB, Fixed] / 2, for a time equal to timeToTrigger2fRscp [RNC, 640, ms, Fixed] , then event 2f occurs. The UE then sends a MEASUREMENT REPORT message for event 2f to the Serving Radio Network Controller (SRNC). When the Serving Radio Network Controller (SRNC) receives event 2f, it commands the UE to stop all Compressed Mode measurements. Figure 18: Event 2f Trigger (Cease Compressed Mode)

CPICH Ec/No or CPICH RSCP

usedFreqRelThresh2dEcno + usedFreqRelThresh2fEcno and usedFreqRelThresh2dRscp + usedFreqRelThresh2fRscp

Best Cell in the Active Set hysteresis2f

MEASUREMENT REPORT to RNC

timeToTrigger2dEcno and timeToTrigger2fRscp

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 60 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.4.3

Begin Compressed Mode – UE Transmit power is Above Threshold (Event 6d)

If txPowerConnQualMonEnabled [RNC, 0=FALSE, Binary, Fixed] is set to TRUE and the UE transmitted power is at maximum for a time equal to timeToTrigger6d [RNC, 320, ms, Fixed] , then event 6d occurs. The UE then sends a MEASUREMENT REPORT message for event 6d to the Serving Radio Network Controller (SRNC). When the Serving Radio Network Controller (SRNC) receives event 6d, it commands the UE to begin Compressed Mode measurements. Figure 19: Event 6d Trigger (Begin Compressed Mode)

Power Maximum UE Tx Power

UE Transmission Power

MEASUREMENT REPORT to RNC

timeToTrigger6d

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 61 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.4.4

Cease Compressed Mode – UE Transmit power is Below Threshold (Event 6b)

If txPowerConnQualMonEnabled [RNC, 0=FALSE, Binary, Fixed] is set to TRUE and the UE transmitted power becomes less than the absolute threshold ueTxPowerThresh6b [RNC, 21, dB, Fixed] for a time equal to timeTrigg6b [RNC, 1280, ms, Fixed] , then event 6b occurs. The UE then sends a MEASUREMENT REPORT message for event 6b to the Serving Radio Network Controller (SRNC). When the Serving Radio Network Controller (SRNC) receives event 6b, it commands the UE to stop Compressed Mode measurements. Figure 20: Event 6b Trigger (Cease Compressed Mode) Power ueTxPowerThresh6b

UE Transmission Power MEASUREMENT REPORT to RNC

timeTrigg6b

5.3.4.5

Filtering, Offsetting and Weighting for Inter-Frequency or Inter-RAT measurements

Filtering: Before Events 2d or 6d can occur, the measurements made by the UE are Filtered according to the formula below: Fn = (1-a) F n-1 + a M n Where: • Fn = The updated measurement. • Fn-1 = the last (old) filtered measurement result. • Mn = the Ec/No as measured by the UE. • a = 1/2(k/2) where k is filterCoefficient2 [RNC, 2, coeff, Fixed] or filterCoeff6 [RNC, 3, coeff, Fixed] respectively for Events 2x or 6x.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 62 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Offsetting: The updated measurement (Fn) is then offset by individualOffset(UtranCell) [Cell, 0, 0.5dB, Fixed]. Weighting: For Events 2d, and 2f, usedFreqW2d [RNC, 10, 0.1unit, Fixed] or usedFreqW2f [RNC, 10, 0.1unit, Fixed] respectively can be added in order to give heavier weight to cells in the Active Set that are not the best cell in the Active Set.

5.3.4.6

Whether to measure Inter-Frequency or Inter-RAT

If Compressed Mode measurements are required of the UE, the following parameters are considered: • Inter-Frequency measurements can be made only if FddIfHoSupp [RNC, 0=FALSE, Binary, Fixed] =TRUE. • Compressed Mode measurements of Inter-RAT neighbors can be made only if FddGsmHoSupp [RNC, 1=TRUE, Binary, Fixed] =TRUE.

If all Inter-Frequency neighbors are within the same Serving Radio Network Controller (SRNC), hoType [Cell, 1=GSM_PREFERRED, String, Fixed] determines if Inter-Frequency or Inter-RAT neighbors are evaluated. If however, all of the Inter-Frequency neighbors are not within the same Serving Radio Network Controller (SRNC), a parameter called defaultHoType [Cell, 1=GSM_PREFERRED, String, Fixed] set per uarfcnDl [Cell, N/A, Integer, Variable] for the Drift Radio Network Controller (DRNC) is used. This parameter has been implemented due to a standards limitation in the Iur interface. hoType [Cell, 1=GSM_PREFERRED, String, Fixed] and defaultHoType [Cell, 1=GSM_PREFERRED, String, Fixed] have the following settings which determine how the UE will behave. • If at least one cell in Active Set has hoType [Cell, 1=GSM_PREFERRED, String, Fixed] =0 (IF-Preferred), then Inter-Frequency neighbors are evaluated. • If at least one cell in Active Set has hoType [Cell, 1=GSM_PREFERRED, String, Fixed] =1 (GSM-Preferred), and no cell has hoType [Cell, 1=GSM_PREFERRED, String, Fixed] =0 (IF-Preferred), then Inter-RAT neighbors are evaluated. • If all cells in the Active Set have hoType [Cell, 1=GSM_PREFERRED, String, Fixed] =2 (None), then neither InterFrequency nor Inter-RAT neighbors are evaluated.

5.3.4.7

Compressed Mode Measurement evaluation

Upon receiving either Event 2d or Event 6d from the UE, the Serving RNC sends a MEASUREMENT CONTROL message to the UE with additional Event based criteria that the UE will use to evaluate the results of the Compressed Mode (CM) measurements. • The algorithm looks to see what initiated the Compressed Mode (CM) trigger. • CPICH Ec/No from Event 2d • CPICH RSCP from Event 2d • UE Transmission Power from Event 6d • If the Compressed Mode trigger measured Inter-Frequency or Inter-RAT measurements.

The following details the algorithms and configurable parameters that apply based upon the type of trigger that initiated the Compressed Mode measurements.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 63 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

If the Event 2d reported by the UE indicated the trigger occurred due to CPICH Ec/No for Inter-RAT measurements the following occurs: • If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) Ec/No of the Best Cell in the Active Set is less than usedFreqThresh2dEcno + utranRelThresh3aEcno [RNC, 2, dB, Fixed] – hysteresis3a [RNC, 4, 0.5dB, Fixed] / 2 and the Weighted absolute level of the GSM Broadcast Control CHannel (BCCH) is greater than gsmThresh3a [RNC, -98, dBm, Fixed] for a time equal to timeToTrigger3a [RNC, 6=100, ms, Fixed] then the UE sends a MEASUREMENT REPORT for event 3a to the Serving RNC and an Inter-RAT Handover commences.

Figure 21: Event 3a (EcNo) CPICH Ec/No or BCCH RxLev usedFreqThresh2dEcno + utranRelThresh3aEcno Best Cell in the Active Set gsmThresh3a hysteresis3a

MEASUREMENT REPORT to RNC GSM BCCH timeToTrigger3a

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 64 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

If the Event 2d reported by the UE indicated the trigger occurred due to CPICH RSCP for Inter-RAT measurements the following occurs: • If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) Ec/No of the Best Cell in the Active Set is less than usedFreqThresh2dRscp + utranRelThresh3aRscp [RNC, 7, dB, Fixed] – hysteresis3a [RNC, 4, 0.5dB, Fixed] / 2 and the Weighted absolute level of the GSM Broadcast Control CHannel (BCCH) is greater than gsmThresh3a [RNC, -98, dBm, Fixed] for a time equal to timeToTrigger3a [RNC, 6=100, ms, Fixed] then the UE sends a MEASUREMENT REPORT for event 3a to the Serving RNC and an Inter-RAT Handover commences.

Figure 22: Event 3a (RSCP)

CPICH RSCP or BCCH RxLev usedFreqThresh2dRscp + utranRelThresh3aRscp Best Cell in the Active Set gsmThresh3a hysteresis3a

MEASUREMENT REPORT to RNC GSM BCCH timeToTrigger3a

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 65 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

If Event 6d was reported indicating the trigger occurred due to UE Transmit Power, the following occurs for Inter-RAT measurements: • If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) RSCP of the Best Cell in the Active Set is less than usedFreqThresh2dRscp + utranRelThresh3aRscp [RNC, 7, dB, Fixed] + utranRelThreshRscp [RNC, 5, dB, Fixed] – hysteresis3a [RNC, 4, 0.5dB, Fixed] / 2 and the Weighted absolute level of the GSM Broadcast Control CHannel (BCCH) is greater than gsmThresh3a [RNC, -98, dBm, Fixed] for a time equal to timeToTrigger3a [RNC, 6=100, ms, Fixed] then the UE sends a MEASUREMENT REPORT for event 3a to the Serving RNC and an Inter-RAT Handover commences.

Figure 23: Event 3a (UE Tx)

CPICH RSCP or BCCH RxLev

usedFreqThresh2dRscp + utranRelThresh3aRscp + utranRelThreshRscp

Best Cell in the Active Set gsmThresh3a hysteresis3a

MEASUREMENT REPORT to RNC GSM BCCH timeToTrigger3a

Filtering: Before Event 3a can occur, the measurements made by the UE are Filtered according to the formula below: Fn = (1-a) F n-1 + a M n Where: • Fn = The updated measurement. • Fn-1 = the last (old) filtered measurement result. • Mn = the Ec/No as measured by the UE. • a = 1/2(k/2) where k is gsmFilterCoefficient3 [RNC, 1, coeff, Fixed].

Offsetting: The updated measurement (Fn) is then offset by individualOffset(UtranCell) [Cell, 0, 0.5dB, Fixed].

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 66 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Weighting: For Event 3a, utranCoefficient3 [RNC, 2, coeff, Fixed] can be used to give heavier weight to the serving cell while utranW3a [RNC, 10, 0.1unit, Fixed] can be used to give heavier weight to the candidate cell. If the Event 2d reported by the UE indicated the trigger occurred due to CPICH Ec/No for Inter-Frequency measurements: • If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) Ec/No of the Best Cell in the Active Set is less than usedFreqThresh2dEcno + usedFreqRelThresh4_2bEcno [RNC, -1, dB, Fixed] – hyst4_2b [RNC, 10, 0.1dB, Fixed] / 2 and the Waited estimated quality of the unused frequency is above both the absolute thresholds nonUsedFreqThresh4_2bEcno [RNC, -13, dB, Fixed] + hyst4_2b [RNC, 10, 0.1dB, Fixed] / 2 and nonUsedFreqThresh4_2bRscp [RNC, -105, dBm, Fixed] + hyst4_2b [RNC, 10, 0.1dB, Fixed] / 2, for at least timeTrigg4_2b [RNC, 100, ms, Fixed] , then the UE sends a MEASUREMENT REPORT for event 2b to the Serving RNC and an Inter-Frequency Handover commences.

Figure 24: Event 2b (EcNo)

CPICH Ec/No or CPICH RSCP

usedFreqThresh2dEcno + usedFreqRelThresh4_2bEcno

Best Cell in the AS 'used'

nonUsedFreqThresh4_2bRscp nonUsedFreqThresh4_2bEcno hyst4_2b

Candidate 'non-unused' Frequency

ND-00150 Rev. 3.0 09/09/2007

MEASUREMENT REPORT to RNC timeTrigg4_2b

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 67 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

If the Event 2d reported by the UE indicated the trigger occurred due to CPICH RSCP for Inter-Frequency measurements: • If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) RSCP of the Best Cell in the Active Set is less than usedFreqThresh2dRscp + UsedFreqRelThresh4_2bRscp [RNC, -3, dB, Fixed] – Hyst4_2b [RNC, 10, 0.1dB, Fixed] / 2 and the Weighted estimated quality of the unused frequency is above both the absolute thresholds nonUsedFreqThresh4_2bEcno [RNC, -13, dB, Fixed] + hyst4_2b [RNC, 10, 0.1dB, Fixed] / 2 and nonUsedFreqThresh4_2bRscp [RNC, -105, dBm, Fixed] + hyst4_2b [RNC, 10, 0.1dB, Fixed] / 2, for at least timeTrigg4_2b [RNC, 100, ms, Fixed] , then the UE sends a MEASUREMENT REPORT for event 2b to the Serving RNC and an Inter-Frequency Handover commences.

Figure 25: Event 2b (RSCP) CPICH Ec/No or CPICH RSCP

usedFreqThresh2dRscp + usedFreqRelThresh4_2bRscp

Best Cell in the AS

nonUsedFreqThresh4_2bRscp nonUsedFreqThresh4_2bEcno hyst4_2b

Candidate (unused) Frequency

ND-00150 Rev. 3.0 09/09/2007

MEASUREMENT REPORT to RNC

timeTrigg4_2b

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 68 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

If Event 6d was reported indicating the trigger occurred due to UE Transmit Power, the following occurs for Inter-Frequency measurements: • If the Filtered, Offset and Weighted Primary Common Pilot Channel (P-CPICH) RSCP of the Best Cell in the Active Set is less than usedFreqThresh2dRscp + UsedFreqRelThresh4_2bRscp [RNC, -3, dB, Fixed] + utranRelThreshRscp [RNC, 5, dB, Fixed] – hyst4_2b [RNC, 10, 0.1dB, Fixed] / 2 and the Weighted RSCP of the unused frequency is greater than nonUsedFreqThresh4_2bRscp [RNC, -105, dBm, Fixed] + hyst4_2b [RNC, 10, 0.1dB, Fixed] / 2, for at least timeTrigg4_2b [RNC, 100, ms, Fixed] , then the UE sends a MEASUREMENT REPORT for event 2b to the Serving RNC and an Inter-Frequency Handover commences.

Figure 26: Event 2b (UE Tx)

CPICH RSCP Best Cell in the AS 'used'

usedFreqThresh2dRscp + usedFreqRelThresh4_2bRscp + utranRelThreshRscp nonUsedFreqThresh4_2bRscp

hyst4_2b

MEASUREMENT REPORT to RNC

Candidate 'non-used' Frequency

timeTrigg4_2b

Filtering: Before Event 2b can occur, the measurements made by the UE are Filtered according to the formula below: Fn = (1-a) F n-1 + a M n Where: • Fn = The updated measurement. • Fn-1 = the last (old) filtered measurement result. • Mn = the Ec/No as measured by the UE. • a = 1/2(k/2) where k is filterCoeff4_2b [RNC, 2, coeff, Fixed].

Offsetting: The updated measurement (Fn) is then offset by individualOffset(UtranCell) [Cell, 0, 0.5dB, Fixed]. Weighting: For Event 2b, usedFreqW4_2b [RNC, 0, coeff, Fixed] can be used to give heavier weight to the serving cell while nonUsedFreqW4_2b [RNC, 0, coeff, Fixed] [RNC, 0, coeff, Fixed] can be used to give heavier weight to the candidate cell.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 69 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.5 HS Cell Change hsQualityEstimate [RNC, 1=RSCP, Binary, Fixed] determines if whether Primary Common Pilot Channel (P-CPICH) Ec/No or Primary Common Pilot Channel (P-CPICH) RSCP is used. Based upon this setting, if one of the cells in the Active Set becomes greater than the Best Cell in the Active Set by hsHysteresis1d [RNC, 10, 0.1dB, Fixed] / 2, for a time equal to hsTimeToTrigger1d [RNC, 640, ms, Fixed] , then event 1d HS occurs. The UE then sends a MEASUREMENT REPORT message for event 1d HS to the Serving Radio Network Controller (SRNC). If hsCellChangeAllowed [RNC, 1=TRUE, Binary, Fixed] is set to TRUE, a Serving HS-DSCH Cell Change will occur. Figure 27: Event 1d HS (HS Cell Change) CPICH Ec/No or RSCP based upon hsQualityEstimate Another Cell in AS Best Cell

hsHysteresis1d

MEASUREMENT REPORT to RNC

hsTimeToTrigger1d

The configurable parameter hsToDchTrigger is used to control whether the High Speed Downlink Shared Channel (HS-DSCH) is dropped or Down-Switched to CELL_DCH for the following cases: • if the Intra-RNC HS Cell Change is triggered by Event 1d HS and if there are no other RNCs involved in the Cell Change, and the Cell Change triggered by Event 1d HS fails, hsToDchTrigger(changeOfBestCellIntraRnc) [RNC, 1=TRUE, Binary, Fixed] is checked. If it set to 1=TRUE, the UE is Down-Switched to CELL_DCH. If it is set to 0=FALSE, the call might be dropped. If HS Multi-RAB is in use, the speech connection is also dropped. • If the Intra-RNC Cell Change is triggered by Event 1b or 1c and there are no other RNCs involved in the Cell Change, and the Cell Change triggered by either Event 1b or Event 1c fails, hsToDchTrigger(servHsChangeIntraRnc) [RNC, 1=TRUE, Binary, Fixed] is checked. If it is set to 1=TRUE, the UE is Down-Switched to CELL_DCH. If it is set to 0=FALSE, the call might be dropped. If HS Multi-RAB is in use, the speech connection is also dropped. • If the Inter-RNC Cell Change is triggered by Event 1b or 1c and there is another RNC involved in the Cell Change, and the Cell Change triggered by either Event 1b or Event 1c fails, hsToDchTrigger(servHsChangeInterRnc) [RNC, 1=TRUE, Binary, Fixed] is checked. If it is set to 1=TRUE, the UE is Down-Switched to CELL_DCH. If it is set to 0=FALSE, the call might be dropped. If HS Multi-RAB is in use,

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 70 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 the speech connection is also dropped. • If the Inter-RAT or Inter-Frequency Cell Change is triggered by Event 2d or Event 6f, then either Inter-RAT or Inter-Frequency is involved. hsToDchTrigger(poorQualityDetected) [RNC, 1=TRUE, Binary, Fixed] is checked. If it is set to 1=TRUE, the UE is Down-Switched to CELL_DCH (64/64 RAB) in order to do Compressed Mode measurements. If it is set to 0=FALSE, the call might be dropped. In the case of HS Multi-RAB, the speech connection is also dropped.

In order to again obtain HSDPA service, the UE must first enter Idle Mode. Throughput on both the uplink and downlink must fall below downswitchThreshold [RNC, 0, 1kbit/s, Fixed] , for a time equal to downswitchTimer [RNC, 100, 100ms, Fixed]. Note that CELL_FACH is not supported over the Iur interface and is therefore not considered.

5.3.6 Channel Switching There are basically two kinds of Channel Switching. They are called Channel Type Switching and Channel Rate Switching. The Channel Type Switching algorithm applies after Interactive Class Call Establishment and allows for the most efficient use of resources by dynamically switching the User Plane data connection between the States of URA_PCH, CELL_FACH (Common Channels), and CELL_DCH (Dedicated Channels). The UEs are Channel Type switched based upon the volume of data being transferred. The Channel Type Switching algorithms are: • Throughput triggered Dedicated (DCH/DCH) to Common Down-Switch • Throughput triggered HS (DCH/HS or EUL/HS to Common Down-Switch • Buffer Load triggered Common to Dedicated (DCH/DCH, DCH/HS or EUL/HS) Up-Switch • Throughput triggered Common to Idle Mode Down-Switch • Throughput triggered Idle Mode to URA_PCH Down-Switch

The Channel Rate Switching algorithm likewise applies after Interactive Class Call Establishment to CELL_DCH (Dedicated Channels) and allows for the most efficient use of resources by dynamically Channel Rate Switching among the available R99 Interactive Class Radio Access Bearers (RABs). The UEs are likewise Channel Rate switched based upon the volume of data being transferred over time. The Channel Rate Switching algorithms are: • Throughput triggered Dedicated to Dedicated Down-Switch (Uplink) • Throughput triggered Dedicated to Dedicated Down-Switch (Downlink) • Throughput triggered Dedicated to Dedicated Up-Switch (Uplink) • Throughput triggered Dedicated to Dedicated Up-Switch (Downlink) • Coverage triggered Dedicated to Dedicated Down-Switch (Downlink only) • Throughput triggered Multi-RAB (Speech and Data) Dedicated to Dedicated Down-Switch

In addition to a UE being Up-Switched and Down-Switched due to User Plane data volume, a UE can be Down-Switched for reasons of Congestion Control, Admission Control, Handover or Coverage. • Admission Control can Down-Switch Interactive Class users to 64/64 when resources are needed for Hand-in or Call Establishment. • In order to support Inter-RNC and Inter-RAT HS Cell Change , UEs are down-switched to DCH/DCH. In the InterRNC case, the UE must stay on DCH/DCH on the Drift RNC until after it transitions to Idle Mode. For the Inter-

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 71 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 RAT case, the UE is down-switched to 64/64 to allow for Compressed Mode measurements of the 2G network. If the Compressed Mode measurements do not result in Inter-RAT Cell Change, the UE will return to its former DCH/HS or EUL/HS condition.

The Channel Type and Rate Switching algorithms base decisions upon three quantities: • Buffer Load. Buffer load considers the size of the Radio Link Control (RLC) window and the total number of bytes in the Service Data Unit (SDU) buffers and retransmission buffers. All Channel Type Up-Switches from either Idle Mode or Common Channels are triggered by Buffer Load. • Throughput. Uplink throughput is defined as the number of bits per second coming up from the Medium Access Control (MAC) Layer to the Radio Link Control (RLC) Layer. Downlink throughput is defined as the number of bits per second coming down from the Radio Link Control (RLC) Layer to the Medium Access Control (MAC) Layer. All Channel Rate Up-Switches and Down-Switches between Dedicated Channels are triggered by Throughput. • Downlink Code Power. The Downlink code power based upon the power of the pilot bits of the Dedicated Physical Control CHannel (DPCCH).

The following sub sections define the algorithms wherein Up-Switches and Down-Switches occur.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 72 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.1

Throughput triggered Dedicated (DCH/DCH) to Common Down-Switch

While the UE is using DCH/DCH, throughput is monitored on the uplink and downlink. If the throughput on both the uplink and downlink falls below downswitchThreshold [RNC, 0, 1kbit/s, Fixed] , for a time equal to downswitchTimer [RNC, 100, 100ms, Fixed] , a Down-Switch to CELL_FACH occurs as indicated below by the Red arrow. If the throughput on either the uplink or downlink increases above downswitchTimerThreshold [RNC, 0, 1kbit/s, Fixed] before downswitchTimer [RNC, 100, 100ms, Fixed] expires, the downswitchTimer [RNC, 100, 100ms, Fixed] is stopped and no Down-Switch is issued. Figure 28: Dedicated (DCH/DCH) to Common Down-Switch

downswitchThreshold and downswitchTimerThreshold

Throughput

Down-Switch to Common Channels occurs

Uplink Throughput Downlink Throughput

downswitchTimer DCH / DCH

EUL / HS

64/384

128/384

384/384

64/128

128/128

384/128

64/64

128/64

384/64

EUL/HS

DCH / HS 384/HS

64/HS CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

Dedicated (DCH/DCH) to Common Down-Switch

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 73 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.2

Throughput triggered HS (DCH/HS or EUL/HS) to Common Down-Switch

While the UE is on the High Speed Downlink Shared CHannel (HS-DSCH), throughput is monitored on the uplink and downlink. If the throughput on both the uplink and downlink is 0 kb/s for hsdschInactivityTimer [RNC, 10, seconds, Fixed] , the UTRAN sends an Iu Release Request to the Core Network and the UE is sent to CELL_FACH State. Any active PDP Context is maintained. Figure 29: HS (DCH/HS or EUL/HS) to Common Down-Switch

Uplink or Downlink Throughput Downlink Throughput Down-Switch to CELL_FACH occurs 0 kb/s Uplink Throughput

hsdschInactivityTimer

DCH / DCH

EUL / HS

64/384

128/384

384/384

64/128

128/128

384/128

64/64

128/64

384/64

EUL/HS

DCH / HS 384/HS

64/HS CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

HS to Common DownSwitch

Page 74 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.3

Buffer Load triggered Common to Dedicated (DCH/DCH, DCH/HS or EUL/HS) Up-Switch

While the UE is in CELL_FACH, Radio Link Control (RLC) buffer loading is monitored on the uplink and downlink. If the Radio Link Control (RLC) buffer load in the uplink exceeds ulRlcBufUpswitch [RNC, 256, bytes, Fixed] , or if the Radio Link Control (RLC) buffer load in the downlink exceeds dlRlcBufUpswitch [RNC, 500, bytes, Fixed] , then an Up-Switch from Common Channels (CELL_FACH) to CELL_DCH occurs (subject to Admission Control ). Figure 30: Common to Dedicated (DCH/DCH, DCH/HS or EUL/HS) Up-Switch

Uplink or Downlink RLC Buffer Up-Switch to Dedicated Channel occurs

dlRlcBufUpswitch

ulRlcBufUpswitch Uplink RLC Buffer

Downlink RLC Buffer

DCH / DCH

EUL / HS

64/384

128/384

384/384

64/128

128/128

384/128

64/64

128/64

384/64

EUL/HS

DCH / HS 384/HS

64/HS CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Common to Dedicated Up-Switch

Page 75 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.4

Throughput triggered Common to URA_PCH Down-Switch

While the UE is in CELL_FACH (Common Channels), throughput is monitored on the uplink and downlink. If the throughput on both the uplink and downlink is 0 kb/s for inactivityTimer [RNC, 10, seconds, Fixed] , the UE is sent to URA_PCH state. Any active PDP Context is maintained. Figure 31: Common to URA_PCH Down-Switch

Uplink or Downlink Throughput Downlink Throughput Down-Switch to URA_PCH occurs 0 kb/s Uplink Throughput

inactivityTimer

DCH / DCH

EUL / HS

64/384

128/384

384/384

64/128

128/128

384/128

64/64

128/64

384/64

EUL/HS

DCH / HS 384/HS

64/HS CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

Common to URA_PCH Down-Switch

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 76 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.5

Throughput triggered URA_PCH to Idle Mode Down-Switch

While the UE is in URA_PCH state, throughput is monitored on the uplink and downlink. If the throughput on both the uplink and downlink is 0 kb/s for inactivityTimerPch [RNC, 30, minutes, Fixed] , the UTRAN sends an Iu Release Request to the Core Network and the UE is sent to Idle Mode. Any active PDP Context is maintained. Figure 32: URA_PCH to Idle Mode Down-Switch

DCH / DCH

EUL / HS

64/384

128/384

384/384

64/128

128/128

384/128

64/64

128/64

384/64

EUL/HS

DCH / HS 384/HS

64/HS CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

URA_PCH to Idle Mode Down-Switch

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 77 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.6

Throughput triggered Dedicated to Dedicated Down-Switch (Downlink)

While the UE is using DCH/DCH; with or without Speech (MultiRAB), throughput is monitored on the downlink. If the throughput on the downlink falls below dlDownswitchBandwidthMargin [RNC, 80, %, Fixed] , for a time equal to dlThroughputDownswitchTimer [RNC, 20, 100ms, Fixed] , a Down-Switch to the next lower rate occurs as indicated below by the Red arrow. Figure 33: Throughput triggered DCH to DCH Down-Switch (Downlink)

Throughput dlDownswitchBandwidthMargin

Down-Switch occurs Downlink Throughput

dlThroughputDownswitchTimer DCH / DCH

EUL / HS

64/384

128/384

384/384

64/128

128/128

384/128

64/64

128/64

384/64

EUL/HS

DCH / HS 384/HS

64/HS CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

Dedicated (DCH/DCH) to Dedicated Down-Switch

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 78 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.7

Throughput triggered Dedicated to Dedicated Down-Switch (Uplink)

While the UE is using DCH/HS or DCH/DCH; with or without Speech (MultiRAB), throughput is monitored on the Uplink. If the throughput on the Uplink falls below ulDownswitchBandwidthMargin [RNC, 80, %, Fixed] , for a time equal to ulThroughputDownswitchTimer [RNC, 20, 100ms, Fixed] , a Down-Switch to the next lower rate occurs as indicated below by the Red arrow. Figure 34: Throughput triggered DCH to DCH Down-Switch (Uplink) Throughput ulDownswitchBandwidthMargin

Down-Switch occurs

Uplink Throughput

ulThroughputDownswitchTimer DCH / DCH

EUL / HS

64/384

128/384

384/384

64/128

128/128

384/128

64/64

128/64

384/64

EUL/HS

DCH / HS 384/HS

64/HS CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

Dedicated to Dedicated Down-Switch

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 79 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.8

Throughput triggered Dedicated to Dedicated Up-Switch (Downlink)

While the UE is using DCH/DCH; with or without Speech (MultiRAB), the downlink throughput and Channelization Code Power are monitored for each UE. If the downlink throughput exceeds bandwidthMargin [RNC, 90, %, Fixed] of the current channel’s capability for an amount of time specified by upswitchTimer [RNC, 5, 100ms, Fixed] , and the Downlink throughput has been below dlThroughputAllowUpswitchThreshold [RNC, 0, %, Fixed] of the maximum channel bitrate, then the downlink code power is checked on all legs in the active set to see if an Up-Switch is possible. If dlThroughputAllowUpswitchThreshold [RNC, 0, %, Fixed] is set to 0, then it has no affect. • The Code Power is checked using the same downswitchPwrMargin [RNC, 2, 0.5dB, Fixed] configurable parameter used in the Coverage triggered Dedicated to Dedicated Down-Switch. If the estimated power increase due to the Up-Switch (64 to 128 = 2.9dB, 128 to 384 = 4.7dB) is within maximumTransmissionPower [Cell, 400, 0.1dBm, Var.] – downswitchPwrMargin [RNC, 2, 0.5dB, Fixed] – upswitchPwrMargin [RNC, 6, 0.5dB, Fixed] , then code power is considered to be available.

Figure 35: Code Power check for Up-Switch (Downlink)

Power

downswitchPwrMargin

maximumTransmissionPower

upswitchPwrMargin

Downlink Code Power

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 80 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

If Code Power is available, then an Up-Switch is allowed to occur subject to Admission Control. When Up-Switching from 64kb, the first attempt will be made to Up-Switch to 384kb. If this attempt fails, a second attempt to Up-Switch to 128kb will be made. Figure 36: Code Power check for Up-Switch (Downlink)

Throughput Downlink Throughput

bandwidthMargin

Up-Switch occurs

dlThroughputAllowUpswitchThreshold

upswitchTimer DCH / DCH 64/384 1st Attempt

64/128 2nd Attempt

64/64

EUL / HS 128/384 1st Attempt

128/128 2nd Attempt

128/64

384/384

EUL/HS

1st Attempt

384/128

DCH / HS

2nd Attempt

384/HS

384/64

64/HS CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

Dedicated to Dedicated Up-Switch

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 81 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.9

Throughput triggered Dedicated to Dedicated Up-Switch (Uplink)

While the UE is using DCH/DCH or DCH/HS, throughput is monitored on the uplink. If the throughput on the uplink increases above bandwidthMarginUl [RNC, 90, %, Fixed] of the Radio Access Bearers capability for a time equal to upswitchTimerUl [RNC, 1, 100ms, Fixed] , and the Uplink throughput has been below ulThroughputAllowUpswitchThreshold [RNC, 90, %, Fixed] of the maximum channel bitrate, an Up-Switch to the next highest Radio Access Bearer (RAB) occurs as indicated below by the Red arrows. If ulThroughputAllowUpswitchThreshold [RNC, 90, %, Fixed] is set to 0, then it has no affect. Figure 37: Throughput Triggered Up-Switch (Uplink)

Throughput

bandwidthMarginUl

Uplink Throughput

Up-Switch to next highest RAB occurs

ulThroughputAllowUpswitchThreshold

upswitchTimerUl

DCH / DCH

EUL / HS

64/384

128/384

384/384

64/128

128/128

384/128

64/64

128/64

384/64

EUL/HS

DCH / HS 384/HS

64/HS CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

Dedicated to Dedicated Down-Switch

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 82 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.10 Coverage triggered Dedicated to Dedicated Down-Switch Coverage, or rather the lack of coverage, may cause the downlink code power to increase to its maximum. In this case, a Down-Switch from 64/384 to 64/128 or from 64/128 to 64/64 is preferable to exhausting power and possibly dropping the connection. The algorithm periodically (every 1 second) monitors downlink code power on all legs in the Active Set. If the downlink code power on all legs in the Active Set is within downswitchPwrMargin [RNC, 2, 0.5dB, Fixed] of maximumTransmissionPower [Cell, 400, 0.1dBm, Var.] , then coverageTimer [RNC, 10, 100ms, Fixed] is started. If the code power on all of the legs stays above maximumTransmissionPower [Cell, 400, 0.1dBm, Var.] - reportHysteresis [RNC, 6, 0.5dB, Fixed] before coverageTimer [RNC, 10, 100ms, Fixed] expires, the UE is DownSwitched to the next lowest Radio Access Bearer (RAB). Figure 38: Covered Triggered Ded. to Ded. Down-Switch

Power

downswitchPwrMargin

maximumTransmissionPower reportHysteresis Down-Switch to next lowest RAB

Downlink Code Power

coverageTimer

DCH / DCH

EUL / HS

64/384

128/384

384/384

64/128

128/128

384/128

64/64

128/64

384/64

EUL/HS

DCH / HS 384/HS

64/HS CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

Dedicated (DCH/DCH) to Dedicated Down-Switch

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 83 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.11 Throughput triggered Speech + Data Multi-RAB Down-Switch While the UE has a DCH/HS Multi-RAB or DCH/HS Multi-RAB with Speech connection, throughput is monitored on the uplink and downlink. If the throughput on both the uplink and downlink is 0 kb/s for downswitchTimerSp [RNC, 2, 0.5seconds, Fixed] , the connection is Down-Switched to CS Conversational 12.2k AMR speech and PS Interactive 0/0 data (SP0). Figure 39: Throughput Triggered Down-Switch (Multi-RAB)

Uplink or HS Downlink Throughput Downlink Throughput Down-Switch to Idle occurs 0 kb/s Uplink Throughput

downswitchTimerSp

DCH / DCH with Speech

EUL / HS

64/384

128/384

384/384

64/128

128/128

384/128

64/64

128/64

384/64

EUL/HS

DCH / HS with Speech 384/HS

64/HS

0/0 with Speech CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

Down-Switch to SP0

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 84 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.12 Throughput triggered Speech + Data Multi-RAB Up-Switch While the UE has a Multi-RAB CS Conversational 12.2k AMR speech and PS Interactive 0/0 data (SP0) connection, the Radio Link Control (RLC) buffer load is monitored on the uplink and downlink. If the Radio Link Control (RLC) buffer load in the uplink exceeds ulRlcBufUpswitchMrab [RNC, 8, bytes, Fixed] or likewise if the Radio Link Control (RLC) buffer load in the downlink exceeds dlRlcBufUpswitchMrab [RNC, 8, 100bytes, Fixed] an Up-Switch to CS Conversational 12.2k AMR speech and PS Interactive 64/64 or 64/HS will occur subject to Admission Control. Figure 40: Throughput Triggered Up-Switch (Multi-RAB) Uplink or Downlink RLC Buffer Load

DL RLC Buffer Load

UL RLC Buffer Load Up-Switch to Multi-RAB 64/64 or 64/HS occurs

dlRlcBufUpswitchMrab

DCH / DCH with Speech

ulRlcBufUpswitchMrab

EUL / HS

64/384

128/384

384/384

64/128

128/128

384/128

64/64

128/64

384/64

EUL/HS

DCH / HS with Speech 384/HS

64/HS

0/0 with Speech CELL_FACH (Common)

URA_PCH

ND-00150 Rev. 3.0 09/09/2007

Idle Mode

Up-Switch from SP0

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 85 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.6.13 Throughput triggered 2xPS or Speech + 2xPS Multi-RAB Down-Switch While the UE has two simultaneous DCH/DCH data RABs or Speech plus two simultaneous DCH/DCH data RABs, throughput is monitored on the uplink and downlink. If the throughput on both the uplink and downlink for one of the Data RABs is 0 kb/s for inactivityTimeMultiPsInteractive [RNC, 50, 100ms, Fixed] , that Data RAB is released. Figure 41: Throughput Triggered Down-Switch (2xPSMulti-RAB)

Throughput Downlink Throughput Data RAB is released 0 kb/s Uplink Throughput

inactivityTimeMultiPsInteractive

5.3.7 HSDPA Scheduling Given all HSDPA users are Interactive / Background Class and as such have no priority over each other, there needs to be an ability to determine how the HS-DSCH is utilized among multiple users on a cell in order to use the resource in the most efficient manner. queueSelectAlgorithm [Cell, 3, Integer, Fixed] controls the method used to accomplish this. The options are: • 1=ROUND_ROBIN. Users are prioritized based upon the amount of data waiting to be transmitted to them. The longer the user has to wait, the higher their priority. There is no consideration for signal quality (CQI). • 2=PROPORTIONAL_FAIR_MEDIUM. In addition to the Round Robin method, a ‘medium’ consideration is given to the users CQI. Because more time is given to users with better signal quality, cell throughput is improved over both ROUND_ROBIN and PROPORTIONAL_FAIR_LOW. However, users with worse quality will not be scheduled as often and as such will need the resource for a longer period of time. • 3=PROPORTIONAL_FAIR_LOW. In addition to the Round Robin method, a ‘low’ consideration is given to the users CQI. Because more time is given to users with better signal quality, cell throughput is improved over ROUND_ROBIN. However, users with worse quality will not be scheduled as often and as such will need the resource for a longer period of time. • 4=PROPORTIONAL_FAIR_HIGH. In addition to the Round Robin method, a ‘high’ consideration is given to the users CQI. Because more time is given to users with better signal quality, cell throughput is improved over ROUND_ROBIN, PROPORTIONAL_FAIR_LOW and PROPORTIONAL_FAIR_MEDIUM. However, users with worse quality will not be scheduled as often and as such will need the resource for a longer period of time. • 5=MAXIMUM_CQI. The user’s quality (CQI) is considered over how much data is waiting to be transmitted to them. Because this option favors signal quality over everything else, cell throughput is maximized. • 6=EQUAL_RATE. This option provides equal opportunity to all users on the cell regardless of signal quality or data waiting to be transmitted. Based upon airRateTypeSelector [Cell, 1=TRANSMITTED, Integer, Fixed] , either Transmitted (acknowledged + unacknowledged) or Acknowledged only data can be used to determine each user’s rate.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 86 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

5.3.8 EUL Scheduling In the interests of getting version 3.0 of the Vol. II Field Guide published, the parameters involved in EUL Sheduling will be defined out of context. Version 3.1 will remedy this. The following comes directly from the CPI. eulTargetRate [Cell, 128, 1kbit/s, Fixed] • Defines the target scheduled grant for the cell that is the EUL scheduler aims to give all users at least eulTargetRate kbps.

eulNoReschUsers [Cell, 5, E-DCH users, Fixed] • Defines the number of simultaneous users per cell that are allowed to perform rescheduling.

eulMaxNoSchEdch [Cell, 16, E-DCH users, Fixed] • Defines the maximum number of simultaneous scheduled serving E-DCH users having a scheduled data rate larger then zero kbps.

eulNoErgchGroups [Cell, 4, E-RGCH groups, Fixed] • Defines the number of E-RGCH groups per channelization code and cell.

eulMaxShoRate [Cell, 1472, 1kbit/s, Fixed] • Defines the maximum rate that may be allocated in the serving cell for scheduled data to an E-DCH user during a soft(er) handover.

eulReservedHwBandwidthSchedDatNonServCell [Cell, 128, 1kbit/s, Fixed] • In soft handover, the non-serving cell shall reserve the hardware resources needed for this rate as well as nonscheduled data.

eulThermalLevelPrior [Cell, -1040, 0.1dBm, Fixed] • This parameter is the assumed mean of the noise floor including feeder and TMA contribution. It describes the mean of the prior information distribution of the noise floor. Normally the default value should be used, but in case for example the RX-chain is wrongly configured this parameter can be set to a different value.

eulSlidingWindowTime [Cell, 1800, seconds, Fixed] • This parameter is the length of the sliding window during which a thermal noise level is calculated.

eulMinMarginCoverage [Cell, 10, -, Fixed] • Defines the minimum margin for the interference contribution from sources other than DCH traffic and thermal noise (interference from other cells, sources external to the WCDMA system and so on.).

eulNoiseFloorLock [Cell, 0=FALSE, -, Fixed] • If eulNoiseFloorLock [Cell, 0=FALSE, -, Fixed] is set to 0=FALSE, the noise floor is determined according to the measurement algorithm. If set to 1=TRUE, eulNoiseFloorLock [Cell, 0=FALSE, -, Fixed] locks the noise floor level. The noise floor level is locked to eulOptimalNoiseFloorEstimate [Cell, -1040, 0.1dBm, Fixed].

eulMaxRotCoverage [Cell, 100, 0.1dB, Fixed]

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 87 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 • Defines the maximum RoT level that is allowed to preserve coverage (includes all uplink traffic and external interference).

eulMaxOwnUuLoad [Cell, 80, 0.1dB, Fixed] • Defines the maximum allowed power-controlled noise (includes power-controlled RoT including contributions from all uplink traffic) in own cell.

harqTransmUlTti10Max • Defines the maximum number of HARQ transmission attempts for a MAC-e PDU.

5.3.9 Congestion Detection and Resolution The Congestion Control algorithm has the ability to order the Admission Control algorithm to block admission requests in order to reduce congestion. It can also Down-Switch Interactive Packet Switched users to lower throughput Radio Access Bearers (RABs) in an effort to reduce congestion while maintaining Retainability. Congestion must initially be detected, then measures must be taken to resolve it. The following sections cover the parameters used for Congestion Detection and Resolution.

5.3.9.1

Congestion Detection

Congestion is detected through Downlink power utilization and Uplink Received Total Wideband Power (RTWP) measurements obtained through the Node B. The cell is considered Congested when either of these criteria is met. • Downlink Congestion. When the Downlink Transmitted Carrier Power exceeds pwrAdm [Cell, 75, %, Var.] + pwrAdmOffset [Cell, 10, %, Var.] + pwrOffset [Cell, 5, %, Fixed] of maximumTransmissionPower [Cell, 400, 0.1dBm, Var.] for a period of time greater than pwrHyst [Cell, 300, ms, Fixed] , the Downlink is considered congested. The Congested condition is not resolved until the Downlink Transmitted Carrier Power is reduced below pwrAdm [Cell, 75, %, Var.] + pwrAdmOffset [Cell, 10, %, Var.] of maximumTransmissionPower [Cell, 400, 0.1dBm, Var.] for a period of time greater than pwrHyst [Cell, 300, ms, Fixed].

The pwrAdm [Cell, 75, %, Var.] and pwrAdmOffset [Cell, 10, %, Var.] parameters are also used in Admission Control.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 88 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Figure 42: Congestion Detection (Downlink) Power

maximumTransmissionPower

pwrAdm Cell is Congested

pwrAdmOffset pwrOffset

Node B Carrier Power

ND-00150 Rev. 3.0 09/09/2007

pwrHyst

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 89 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 • Uplink Congestion. When the Uplink Received Total Wideband Power (RTWP) exceeds iFCong [Cell, 621, 0.1dBm, Fixed] + iFOffset [Cell, 0, 0.1dB, Fixed] for a period of time greater than iFHyst [Cell, 6000, 10ms, Fixed] , the Uplink is considered congested. The Congested condition is not resolved until the Uplink Transmitted Carrier Power is reduced below iFCong [Cell, 621, 0.1dBm, Fixed] + iFOffset [Cell, 0, 0.1dB, Fixed] for a period of time greater than iFHyst [Cell, 6000, 10ms, Fixed].

Figure 43: Congestion Detection (Uplink)

Recived Total Wideband Power (RTWP) iFOffset

iFCong

Uplink is Congested

RTWP measured by Node B iFHyst

5.3.9.2

Congestion Resolution

Action is taken in the form of blocking new connections (Call Establishments and Hand-ins) and by reducing the rate of existing Interactive Packet Switched connections. If the Congestion is due to Downlink Power Utilization, all new connections are blocked and actions are taken to resolve the Congestion. If the Congestion is due to Uplink Received Total Wideband Power (RTWP), only Call Establishments are blocked as hand-ins reduce Uplink Received Total Wideband Power (RTWP). In the case of Downlink Congestion, beyond blocking Call Establishments and Hand-ins, actions are taken to reduce the amount of downlink power used. This is done by reducing the number of Air Speech Equivalents served by the cell until the Congestion condition is resolved. These actions are taken in the following order. 1. Immediately after Downlink Congested is detected, releaseAseDlNg [Cell, 3, ASE, Fixed] NonGuaranteed Air Speech Equivalents (ASEs) are released in the downlink and timers tmInitialGhs [Cell, 500, ms, Fixed] and tmInitialG [Cell, 3000, ms, Fixed] are started. As long as the congestion situation persists, releaseAseDlNg [Cell, 3, ASE, Fixed] Non-Guaranteed Air Speech Equivalents (ASEs) are released every tmCongActionNg [Cell, 800, ms, Fixed]. 2. If Downlink Congestion persists after all the Non-Guaranteed ASEs in downlink are released and the timer tmInitialGhs [Cell, 500, ms, Fixed] expires, releaseAseDlGhs [Cell, 0, 0.ASE, Fixed] Guaranteed-HS Air Speech Equivalents (ASEs) are released in the downlink. As long as the congestion situation persists, tmCongActionGhs [Cell, 300, ms, Fixed] Guaranteed-HS Air Speech Equivalents (ASEs) are released every releaseAseDlGhs [Cell, 0, 0.ASE, Fixed].

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 90 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

3. If Downlink Congestion persists after all Non-Guaranteed and Guaranteed-HS are released in the downlink and the timer tmInitialG [Cell, 3000, ms, Fixed] has expired, releaseAseDl [Cell, 1, ASE, Fixed] Guaranteed Air Speech Equivalents (ASEs) are released in the downlink. As long as the congestion situation persists, releaseAseDl [Cell, 1, ASE, Fixed] Guaranteed Air Speech Equivalents (ASEs) are released every tmCongAction [Cell, 2000, ms, Fixed].

5.3.10 Radio Connection Supervision The Radio Connection for UEs in CELL_FACH, CELL_DCH and those using HSDPA is continuously monitored in an effort to ensure the RNS has control of the UE. The following describes the parameters that apply to each condition. • Synchronization in CELL_FACH. When a UE enters CELL_FACH, it also starts a timer whose maximum value is set by cchWaitCuT [RNC, 9, 5minutes, Fixed]. While in CELL_FACH, the UE sends Cell Update message every t305 [RNC, 3=30, minutes, Fixed] minutes. Upon receiving a Cell Update CONFIRM, the UE restarts the cchWaitCuT [RNC, 9, 5minutes, Fixed] timer. If the cchWaitCuT [RNC, 9, 5minutes, Fixed] timer expires, the release of the connection is triggered. The cchWaitCuT [RNC, 9, 5minutes, Fixed] timer is stopped and reset to 0 if the UE enters CELL_DCH. • Uplink Synchronization in CELL_DCH. When nOutSyncInd [Cell, 10, frames, Fixed] number of consecutive frames are out-of-sync, a timer, rlFailureT [Cell, 10, 0.1seconds, Fixed] is started. If rlFailureT [Cell, 10, 0.1seconds, Fixed] expires, the Radio Link Set is considered out-of-sync and a Radio Link Failure is reported to the Serving Radio Network Controller (SRNC). If while the Radio Link is out-of-sync, and nInSyncInd [Cell, 3, frames, Fixed] number of frames are in-sync, the Radio Link is considered in-sync and a Radio Link Restore is reported to the Serving Radio Network Controller (SRNC). The connection is considered lost if the last Radio Link has been out-of-sync for dchRcLostT [RNC, 50, 0.1seconds, Fixed]. • Downlink Synchronization in CELL_DCH. When n313=100 number of consecutive frames are out-of-sync, a timer t313=3s.] is started. If t313 expires, the Radio Link is considered out-of-sync and a Radio Link Failure is reported to the Serving Radio Network Controller (SRNC). If while the Radio Link is out-of-sync, and n315=1 number of frames are in-sync, the Radio Link is considered in-sync and a Radio Link Restore is reported to the Serving Radio Network Controller (SRNC). Note that none of the Downlink Synchronization parameters are currently operator configurable. • HSDPA Supervision. For UEs with HSDPA capability, hsDschRcLostT [RNC, 100, 0.1seconds, Fixed] is used. The connection is considered lost if the Radio Link containing the High Speed Downlink Shared Channel (HSDSCH) has been out-of-sync for hsDschRcLostT [RNC, 100, 0.1seconds, Fixed].

5.3.11 Downlink and Uplink Power Control This section details the parameters used to control Uplink and Downlink power for CELL_FACH, CELL_DCH and HSDPA.

5.3.11.1 Maximum Forward Access CHannel (FACH) Power The Forward Access CHannel (FACH) can carry either Control Plane or User Plane data. • Control Plane. When the Forward Access CHannel (FACH) is used to support the Broadcast Control CHannel (BCCH), Common Control CHannel (CCCH), or Dedicated Control Channel (DCCH), its maximum power is set relative to the Primary Common Pilot CHannel power (PCPICH) using maxFach1Power [Cell, 18, 0.1dB, Fixed]. • User Plane. When the Forward Access CHannel (FACH) is used to support the Dedicated Traffic Channel (DTCH), its maximum power is set relative to the Primary Common Pilot CHannel power (PCPICH) using maxFach2Power [Cell, 15, 0.1dB, Fixed]. • Power offsets relative to the Data Field for the Transport Format Combination Indicator (TFCI) and Pilot

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 91 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Fields. pOffset1Fach [Cell, 0, 0.1dB, Fixed] for the TFCI field and pOffset3Fach [Cell, 0, 0.1dB, Fixed] for the Pilot field take over once the initial offsets have been established by pO1 [RNC, 0, 0.25dB, Fixed] and pO3 [RNC, 12, 0.25dB, Fixed].

5.3.11.2 Downlink CELL_DCH Power Settings There are parameters associated with maintaining upper and lower limits for power per Radio Link on the Downlink. • Minimum Downlink Transmitted Code Power. It is possible to set the maximum extent to which Power Control can reduce the power of a Radio Link. The minimum downlink Transmitted Code Power is set relative to the Primary Common Pilot CHannel (P-CPICH) power through minPwrRl [Cell, -150, 0.1dB, Fixed]. • Maximum Downlink Transmitted Code Power. When determining the Maximum Downlink Transmitted Code Power for a Radio Link, the maximum bit rate of the Radio Link must be considered. The following table indicates the maximum bit rate for each Radio Link supported by AT&T.

Table 15: Maximum Bit Rates per Radio Link Radio Connection Type

Maximum Bitrates

Signaling Radio Bearer

14800

Conversational Circuit Switched Speech AMR 12.2kb

15900

Interactive Packet Switched 64kb

67700

Interactive Packet Switched 128kb

138100

Interactive Packet Switched 384kb

406900

HS for Downlink – A-DCH only

3700

The following parameters are used to determine the Maximum Downlink Transmitted Code Power for a Radio Link based upon the Radio Link’s maximum bit rate. • Requests for a Radio Link bit rates below minimumRate [Cell, 1590, 10bps, Fixed] are allocated a maximum Transmitted Code Power of minPwrMax [Cell, 0, 0.1dB, Fixed] relative to the Primary Common Pilot Channel (CPICH) power. • Requests for a Radio Link bit rates between minimumRate [Cell, 1590, 10bps, Fixed] and interRate [Cell, 7760, 10bps, Fixed] are allocated a maximum Transmitted Code Power of interPwrMax [Cell, 38, 0.1dB, Fixed] relative to the Primary Common Pilot Channel (CPICH) power. • Requests for a Radio Link bit rates between interRate [Cell, 7760, 10bps, Fixed] and maxRate [Cell, 40690, 10bps, Fixed] are allocated a maximum Transmitted Code Power of maxPwrMax [Cell, 48, 0.1dB, Fixed] relative to the Primary Common Pilot Channel (CPICH) power.

The initial downlink Dedicated Physical Data CHannel (DPDCH) power after Soft Handover is determined using the following formula: P_DL_DPDCH = primaryCpichPower [Cell, 300, 0.1dBm, Fixed] + (dlInitSirTarget [RNC, 41, 0.1dB, Fixed] - Ec/No_PCPICH) + cSho + 10 log(2/SF_DL_DPDCH) Where: • P_DL_DPDCH is the initial downlink Dedicated Physical Data CHannel (DPDCH) power at handover. • primaryCpichPower [Cell, 300, 0.1dBm, Fixed] sets the power of the Primary Common Pilot Channel (P-CPICH)

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 92 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 sent in SIB 5. • dlInitSirTarget [RNC, 41, 0.1dB, Fixed] sets the required initial Signal to Interference Ratio (SIR) Target. • Ec/No_PCPICH is the ratio of Chip Energy to the Noise Power Spectral Density of the Primary Common Pilot CHannel (P-CPICH) as measured by the UE. If this measurement is not available, ecNoPcpichDefault [RNC, 16, dB, Fixed] is used. • cSho used to offset the value of P_DL_DPDCH by a handover margin (mSHO) and a configurable parameter initShoPowerParam [RNC, -2, 1dB, Fixed]. • SF_DL_DPDCH is the Spreading Factor of the downlink Dedicated Physical Data CHannel (DPDCH).

The initial downlink Dedicated Physical Data CHannel (DPDCH) power after Hard Inter-Frequency Handover is determined using the following formula: P_DL_DPDCH = primaryCpichPower [Cell, 300, 0.1dBm, Fixed] + (dlInitSirTarget [RNC, 41, 0.1dB, Fixed] - Ec/No_PCPICH) + cNbifho [RNC, 10, 0.1dB, Fixed] + 10 log(2/SF_DL_DPDCH) Where: • P_DL_DPDCH is the initial downlink Dedicated Physical Data CHannel (DPDCH) power at handover. • primaryCpichPower [Cell, 300, 0.1dBm, Fixed] sets the power of the Primary Common Pilot Channel (P-CPICH) sent in SIB 5. • dlInitSirTarget [RNC, 41, 0.1dB, Fixed] sets the required initial Signal to Interference Ratio (SIR) Target. • Ec/No_PCPICH is the ratio of Chip Energy to the Noise Power Spectral Density of the Primary Common Pilot CHannel (P-CPICH) as measured by the UE. If this measurement is not available, ecNoPcpichDefault [RNC, 16, dB, Fixed] is used. • cNbifho [RNC, 10, 0.1dB, Fixed] is used to offset the value of P_DL_DPDCH by a taking into account the InterFrequency handover margins. • SF_DL_DPDCH is the Spreading Factor of the downlink Dedicated Physical Data CHannel (DPDCH).

5.3.11.3 Downlink Power Balancing Initial downlink power is achieved on the first Radio Link using the procedures and configurable parameters covered in the Call Establishment section. Once additional Radio Links are added to the Active Set, it becomes important to coordinate the downlink power from multiple serving cells. Keep in mind, all cells in the Active Set listen to the same Transmit Power Control (TPC) commands from the UE. Over time, it is possible for the cells serving the UE to transmit at significantly different power levels relative to each other. This is known as downlink Power Drift. The following algorithm is used to manage Power Drift. dlPcMethod [RNC, 3=BALANCING, Integer, Fixed] is used in conjunction with Inner Loop Power Control to manage Power Drift. The options are FIXED, NO_BALANCING, BALANCING and FIXED_BALANCING. • 1=FIXED. Both Power Balancing and downlink Inner Loop Power Control are disabled. The downlink power is kept at a constant level of fixedPowerDl [RNC, 65, 0.5dB, Fixed]. • 2=NO_BALANCING. Downlink Inner Loop Power Control is active for any number of Radio Links in the Active Set, but Power Balancing is not. • 3=BALANCING. Power Balancing and Inner Loop Power Control are active. • 4=FIXED_BALANCING. Downlink Inner Loop Power Control is active is there is only one Radio Link in the Active Set. Once another Radio Link is added to the Active Set, Downlink Inner Power Control is deactivated and the

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 93 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 downlink power from each serving cell converges on the power level set by fixedRefPower [RNC, 65, 0.5dB, Fixed].

5.3.11.4 High Speed Downlink Packet Access (HSDPA) Power and Code Control High Speed Downlink Packet Access (HSDPA) utilizes the following channels. The power and code related parameters are presented within their respective context. • High-Speed Shared Control Channel (HS-SCCH). This downlink channel carries hybrid-ARQ and the High Speed Dedicated Shared CHannel (HS-DSCH) Transport Format and Resource Combination (TFRC) selection information from the MAC-hs in the Node B to the scheduled UE. The numHsScchCodes [Cell, 3, codes, Fixed] parameter denotes the number of High Speed Dedicated Shared CHannels (HS-DSCH) in the cell as well as the number of HS users that can share a single TTI. If flexibleSchedulerOn [RNC, 1=TRUE, Binary, Fixed] is set to 1=TRUE, the maximum and minimum power of the High Speed Shared Control CHannel (HS-SCCH) are set through hsScchMaxCodePower [Cell, -20, 0.5dB, Fixed] and hsScchMinCodePower [Cell, -150, 0.5dB, Fixed] relative to the Primary Common Pilot Channel (PCPICH). The dynamic power control of the High Speed Shared Control CHannel (HS-SCCH) is based upon measurements sent from the UE, and can be offset by qualityCheckPower [Cell, 0, 0.5dB, Fixed] if necessary. • High Speed Physical Downlink Shared CHannel (HS-PDSCH). The Transport Channel called the High Speed Downlink Shared Channel (HS-DSCH) is mapped to one or more High Speed Physical Downlink Shared CHannels (HS-PDSCH). The maximum power of each High Speed Physical Downlink Shared CHannel (HS-PDSCH) is set to maximumTransmissionPower [Cell, 400, 0.1dBm, Var.] - hsPowerMargin [Cell, 2, 0.5dB, Fixed]. The number of Spreading Factor 16 High Speed Physical Downlink Shared CHannels (HS-PDSCH) reserved for HSDPA is controlled through numHsPdschCodes [Cell, 4, codes, Fixed]. If dynamicHsPdschCodeAdditionOn [RNC, 1=TRUE, Binary, Fixed] is set to 1=TRUE, then the maximum number of Spreading Factors 16 that can be made available for the High Speed Physical Downlink Shared CHannels (HS-PDSCH) is limited to maxNumHsPdschCodes [Cell, 10, codes, Fixed]. If flexibleSchedulerOn [RNC, 1=TRUE, Binary, Fixed] is set to 1=TRUE, then up to 4 users can be code multiplexed on a single 2ms TTI. • High-Speed Dedicated Physical Control CHannel (HS-DPCCH). This uplink control channel is used by the UE to report the measured downlink channel quality and to request the retransmission of erroneous transport blocks on the High Speed Downlink Shared Channel (HS-DSCH). The measured downlink channel quality is reported through use of the Channel Quality Indicator (CQI). Power is controlled on the High-Speed Dedicated Physical Control CHannel (HS-DPCCH) relative to the Dedicated Physical Control Channel (DPCCH).

5.3.11.5 Uplink Power Control There are two options for how Uplink Outer Loop power control is done. The algorithm is chosen using ulOuterLoopRegulator [RNC, 1=JUMP, Integer, Fixed]. Both algorithms observe BLER on the uplink • If ulOuterLoopRegulator [RNC, 1=JUMP, Integer, Fixed] is set to CONSTANT_STEP, and an erroneous block is detected, the uplink SIR target is increased by ulSirStep [RNC, 10, 0.1dB, Fixed] until a number of consecutive blocks are correctly received at which time the uplink SIR target is decreased by an equal step. The number of consecutive blocks necessary to decrease the SIR target is dependant upon the BLER target. • If ulOuterLoopRegulator [RNC, 1=JUMP, Integer, Fixed] is set to JUMP, and an erroneous block is detected, the uplink SIR target is increased by ulSirStep [RNC, 10, 0.1dB, Fixed]. When a block is correctly received, the uplink SIR target is decreased by a fraction of ulSirStep [RNC, 10, 0.1dB, Fixed]. The fraction is based upon the BLER target.

The BLER target for both the downlink and the upink is configurable for each RAB Type and Transport Channel (UeRcTrCh) instance. The first table below correlates the UeRc with the RAB Type and the UeRcTrChId with the UeRcTrCh Instance. The recommended value for each RAB combination supported by AT&T is listed below in the second table.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 94 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Table 16: UeRc, RAB and UeRcTrCh Identification UeRc

RAB Type

UeRcTrCh Id

UeRcTrCh Instance

1

Standalone RRC on DCH

1

The only DCH

2

Speech

1

RRC Conn

2

Speech

2

Speech subflow 1

2

Speech

3

Speech subflow 2

2

Speech

4

Speech subflow 3

5

Packet 64/64

1

RRC Conn

5

Packet 64/64

2

Packet RAB

6

Packet 64/128

1

RRC Conn

6

Packet 64/128

2

Packet RAB

18

Packet 128/128

1

RRC Conn

18

Packet 128/128

2

Packet RAB

7

Packet 64/384

1

RRC Conn

7

Packet 64/384

2

Packet RAB

9

Speech + Packet 0kbps

1

RRC Conn

9

Speech + Packet 0kbps

2

Speech subflow 1

9

Speech + Packet 0kbps

3

Speech subflow 2

9

Speech + Packet 0kbps

4

Speech subflow 3

9

Speech + Packet 0kbps

5

Packet RAB

10

Speech + Packet 64kbps

1

RRC Conn

10

Speech + Packet 64kbps

2

Speech subflow 1

10

Speech + Packet 64kbps

3

Speech subflow 2

10

Speech + Packet 64kbps

4

Speech subflow 3

10

Speech + Packet 64kbps

5

Packet RAB

11

Pre-configured RRC only

1

The only DCH

12

Pre-configured Speech

1

RRC Conn

12

Pre-configured Speech

2

Speech subflow 1

12

Pre-configured Speech

3

Speech subflow 2

12

Pre-configured Speech

4

Speech subflow 3

15

PS Interactive 64/HS - HS-DSCH

1

RRC connection

15

PS Interactive 64/HS - HS-DSCH

2

PS Interactive on A-DCH

16

PS Interactive 384/HS - HS-DSCH

1

RRC connection

16

PS Interactive 384/HS - HS-DSCH

2

PS Interactive on A-DCH

19

Speech+PS Interactive 64/HS

1

RRC Conn

19

Speech+PS Interactive 64/HS

2

PS Interactive on A-DCH

19

Speech+PS Interactive 64/HS

3

Speech subflow 1

19

Speech+PS Interactive 64/HS

4

Speech subflow 2

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 95 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 UeRc

RAB Type

UeRcTrCh Id

UeRcTrCh Instance

19

Speech+PS Interactive 64/HS

5

Speech subflow 3

20

Speech+PS Interactive 384/HS

1

RRC Conn

20

Speech+PS Interactive 384/HS

2

PS Interactive on A-DCH

20

Speech+PS Interactive 384/HS

3

Speech subflow 1

20

Speech+PS Interactive 384/HS

4

Speech subflow 2

20

Speech+PS Interactive 384/HS

5

Speech subflow 3

The table below provides the recommended values for the uplink and downlink for each RAB combination defined in the table above. The first integer in parenthesis indicates the UeRc, the second integer indicates the UeRcTrCh Id. The values are in 10Log10(BLER quality target), for example if the desired BLER quality target is 1%, then blerQualityTarget = 10Log10(0.01) which results in a value of -20. Table 17: blerQualityTarget values blerQualityTargetDl (UeRc,UeRcTrCh)

blerQualityTargetUl (UeRc,UeRcTrCh)

(1,1) [RNC, -20, 10 Log10(BLER), Fixed]

(1,1) [RNC, -20, 10 Log10(BLER), Fixed]

(2,1) [RNC, -20, 10 Log10(BLER), Fixed]

(2,1) [RNC, -20, 10 Log10(BLER), Fixed]

(2,2) [RNC, -20, 10 Log10(BLER), Fixed]

(2,2) [RNC, -20, 10 Log10(BLER), Fixed]

(2,3) [RNC, -20, 10 Log10(BLER), Fixed]

(2,3) [RNC, -20, 10 Log10(BLER), Fixed]

(2,4) [RNC, -20, 10 Log10(BLER), Fixed]

(2,4) [RNC, -20, 10 Log10(BLER), Fixed]

(5,1) [RNC, -20, 10 Log10(BLER), Fixed]

(5,1) [RNC, -20, 10 Log10(BLER), Fixed]

(5,2) [RNC, -20, 10 Log10(BLER), Fixed]

(5,2) [RNC, -20, 10 Log10(BLER), Fixed]

(6,1) [RNC, -20, 10 Log10(BLER), Fixed]

(6,1) [RNC, -20, 10 Log10(BLER), Fixed]

(6,2) [RNC, -20, 10 Log10(BLER), Fixed]

(6,2) [RNC, -20, 10 Log10(BLER), Fixed]

(18,1) [RNC, -20, 10 Log10(BLER), Fixed]

(18,1) [RNC, -20, 10 Log10(BLER), Fixed]

(18,2) [RNC, -20, 10 Log10(BLER), Fixed]

(18,2) [RNC, -20, 10 Log10(BLER), Fixed]

(7,1) [RNC, -20, 10 Log10(BLER), Fixed]

(7,1) [RNC, -20, 10 Log10(BLER), Fixed]

(7,2) [RNC, -20, 10 Log10(BLER), Fixed]

(7,2) [RNC, -20, 10 Log10(BLER), Fixed]

(9,1) [RNC, -20, 10 Log10(BLER), Fixed]

(9,1) [RNC, -20, 10 Log10(BLER), Fixed]

(9,2) [RNC, -20, 10 Log10(BLER), Fixed]

(9,2) [RNC, -20, 10 Log10(BLER), Fixed]

(9,3) [RNC, -20, 10 Log10(BLER), Fixed]

(9,3) [RNC, -20, 10 Log10(BLER), Fixed]

(9,4) [RNC, -20, 10 Log10(BLER), Fixed]

(9,4) [RNC, -20, 10 Log10(BLER), Fixed]

(9,5) [RNC, -20, 10 Log10(BLER), Fixed]

(9,5) [RNC, -20, 10 Log10(BLER), Fixed]

(10,1) [RNC, -20, 10 Log10(BLER), Fixed]

(10,1) [RNC, -20, 10 Log10(BLER), Fixed]

(10,2) [RNC, -20, 10 Log10(BLER), Fixed]

(10,2) [RNC, -20, 10 Log10(BLER), Fixed]

(10,3) [RNC, -20, 10 Log10(BLER), Fixed]

(10,3) [RNC, -20, 10 Log10(BLER), Fixed]

(10,4) [RNC, -20, 10 Log10(BLER), Fixed]

(10,4) [RNC, -20, 10 Log10(BLER), Fixed]

(10,5) [RNC, -20, 10 Log10(BLER), Fixed]

(10,5) [RNC, -20, 10 Log10(BLER), Fixed]

(11,1) [RNC, -20, 10 Log10(BLER), Fixed]

(11,1) [RNC, -20, 10 Log10(BLER), Fixed]

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 96 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 blerQualityTargetDl (UeRc,UeRcTrCh)

blerQualityTargetUl (UeRc,UeRcTrCh)

(12,1) [RNC, -20, 10 Log10(BLER), Fixed]

(12,1) [RNC, -20, 10 Log10(BLER), Fixed]

(12,2) [RNC, -20, 10 Log10(BLER), Fixed]

(12,2) [RNC, -20, 10 Log10(BLER), Fixed]

(12,3) [RNC, -20, 10 Log10(BLER), Fixed]

(12,3) [RNC, -20, 10 Log10(BLER), Fixed]

(12,4) [RNC, -20, 10 Log10(BLER), Fixed]

(12,4) [RNC, -20, 10 Log10(BLER), Fixed]

(15,1) [RNC, -30, 10 Log10(BLER), Fixed]

(15,1) [RNC, -20, 10 Log10(BLER), Fixed]

(15,2) [RNC, -20, 10 Log10(BLER), Fixed]

(15,2) [RNC, -20, 10 Log10(BLER), Fixed]

(16,1) [RNC, -30, 10 Log10(BLER), Fixed]

(16,1) [RNC, -20, 10 Log10(BLER), Fixed]

(16,2) [RNC, -20, 10 Log10(BLER), Fixed]

(16,2) [RNC, -20, 10 Log10(BLER), Fixed]

(19,1) [RNC, -30, 10 Log10(BLER), Fixed]

(19,1) [RNC, -20, 10 Log10(BLER), Fixed]

(19,2) [RNC, -20, 10 Log10(BLER), Fixed]

(19,2) [RNC, -20, 10 Log10(BLER), Fixed]

(19,3) [RNC, -20, 10 Log10(BLER), Fixed]

(19,3) [RNC, -20, 10 Log10(BLER), Fixed]

(19,4) [RNC, -20, 10 Log10(BLER), Fixed]

(19,4) [RNC, -20, 10 Log10(BLER), Fixed]

(19,5) [RNC, -20, 10 Log10(BLER), Fixed]

(19,5) [RNC, -20, 10 Log10(BLER), Fixed]

(20,1) [RNC, -30, 10 Log10(BLER), Fixed]

(20,1) [RNC, -20, 10 Log10(BLER), Fixed]

(20,2) [RNC, -20, 10 Log10(BLER), Fixed]

(20,2) [RNC, -20, 10 Log10(BLER), Fixed]

(20,3) [RNC, -20, 10 Log10(BLER), Fixed]

(20,3) [RNC, -20, 10 Log10(BLER), Fixed]

(20,4) [RNC, -20, 10 Log10(BLER), Fixed]

(20,4) [RNC, -20, 10 Log10(BLER), Fixed]

(20,5) [RNC, -20, 10 Log10(BLER), Fixed]

(20,5) [RNC, -20, 10 Log10(BLER), Fixed]

5.3.11.6 EUL Related Power Control maxUserEhichErgchPowerDl • Determines the maximum power level transmitted on the E-HICH and E-RGCH channels. Set relative to the primaryCpichPower [Cell, 300, 0.1dBm, Fixed].

maxEagchPowerDl • Determines the maximum power level transmitted on the E-AGCH channel. Set relative to the primaryCpichPower [Cell, 300, 0.1dBm, Fixed].

transmissionTargetError • Wanted percentage of E-DCH frames for which the actual number of Harq transmissions is greater than the target number of Harq transmissions.

ulInitSirTargetEdch • Initial Uplink SIR Target for RABs using E-DCH.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 97 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

6. OSS Overview Someone new to either UTRAN in general or Ericsson’s implementation of UTRAN must first understand the availability of OSS-RC related services, i.e. fault, performance and configuration management of the Radio and Core networks. Given the proper understanding and access, the engineer can then measure performance and optimize configuration based upon the recommendations given throughout this document. The proceedures outlined in this seciton are based upon Ericsson OSS-RC release R4. Figure 1 below depicts the UTRAN with its various links including links to the OSS. User access to the OSS is made available through a Citrix server. Figure 44: OSS Connectivity

Core Network

Prospect Client/Web

Prospect n Mu

Citrix Server

Mur

Iu

OSS-RC r Iu

RNC Mub

t Mu

RNC

Citrix Client

Iub

Business Objects Client

RXI NodeB

User Equipment User Equipment

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 98 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

6.1

Configuration Management

There are various methods by which Ericsson UTRAN configurable parameters can be viewed and updated. This section explains the procedures that must be followed in order to obtain the necessary network access and credentials (username and password). Network element addition / deletion procedures are not included in this document.

6.1.1 Configuration Access Procedures The access process varies from region to region. Each region’s process is outlined below. Once credentials are obtained, the user must install a Citrix ICA client on their local machine or laptop. The software can be obtained by going to http://www.citrix.com. Once installed, use the “Add ICA Connection” wizard to add a connection to one of your region’s Citrix Servers. Table 18: Configuration Management Access Procedures Region Central

Northeast

West

Southeast

Process

Citrix Server IP

Go to https://nslogins.edc.cingular.net/ and click on “E” for the “Ericsson UMTS OSS Lcye1ms”. Answer the questions that follow.

ICA 1 - 10.175.144.68

Contact Dan Padowski with the Northeast Region OSS Team. Send your CUID along with a list of markets to which you need access.

ICA 1 - 10.189.19.9

Go to https://wnsuam.wnsnet.attws.com then click on “Request Access” and provide the appropriate information to request access to the Western Region Ericsson UMTS OSS – E7.

ICA 1 - 166.174.241.254

Go to https://nslogins.edc.cingular.net/login.cfm and enter your appropriate domain username and password. Click on “Login Request Form”, then answer the questions that follow.

OSS 1

ICA 2 - 10.175.144.71

ICA 2 - 10.189.19.11

ICA 2 - 155.174.242.1

ICA 1 - 10.184.18.71 ICA 2 - 10.184.18.72

OSS 2 ICA 1 - 10.184.18.141 ICA 2 - 10.184.18.142

6.1.2 Configuration Methods There are three main methods used to control the configuration of the UTRAN • Export configuration data then import configuration changes through the OSS. This is the preferred method for bulk changes. An externally prepared configuration (Bulk CM file) is transferred to the OSS then imported into a “Planned Area”. When the Planned Area is activated, the RNC and/or Node B configuration are updated. The tool used is called the “WCDMA RAN Explorer” and is accessed by right clicking on the OSS desktop and selecting Configuration, WCDMA radio access network, then WCDMA RAN explorer.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 99 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 • Enter configuration changes via the OSS Graphical User Interface (GUI). This is the Ericsson preferred method. First, a “Planned Area” is created, changes are made to it using the Graphical User Interface, then the Planned Area is activated and the RNC and/or Node B configuration are updated, i.e. the Planned Area becomes the Valid Area. The tool used is called the “WCDMA RAN Explorer” and is accessed by right clicking on the desktop and selecting Configuration, WCDMA radio access network, then WCDMA RAN explorer. • Make configuration changes in the UTRAN via a ChangeAll script. A ChangeAll script is written using a specific format in a text file (ChangeAll.txt). The script is then executed as a task in the Job Manager application. ChangeAll allows the user to make global parameter changes to specific network elements. • Use EMAS (Element Manager Software). EMAS exists on each network element (Node B, RNC, RXI) and allows the user to directly view and change the individual network element’s configuration. EMAS is typically not used to change parameters that affect multiple network elements e.g. neighbor lists. EMAS uses a web client from either the OSS via Citrix, or from your laptop assuming you are not blocked by any firewalls.

The Ericsson OSS for UMTS does not support an operator available command line interface.

6.2

Performance Management

There are currently three options available that can be used to access performance data. • Business Objects. Business Objects is a third party application supported by Ericsson that can be used to query the OSS performance reporting database. Business Object can be used on the OSS via a Citrix client or by using a Business Object client installed on your laptop. See the Business Objects access procedure below for access instructions. • Prospect. This performance reporting platform is also known as Watchmark which was purchased by Vallent. Web browser and laptop client options are available. See the Prospect Access procedure below for access instructions. • Tektronix Probes. Probes have been installed on every interface from end to end in the network. Statistical data is sent to the Prospect database for KPI creation. The Tektronix Probe solution also has its own reporting interface accessible via a Citrix client. See the Tektronix Probe Access procedure below for access instructions.

6.2.1 Performance Access Procedures This section provides information concerning how one goes about obtaining access and credentials to the various Performance Reporting systems.

6.2.1.1

Business Object Access

Business Objects access and credentials can be obtained at the same time you request access to the OSS. The Business Objects client software and installation instructions are available at http://ossweb.sc.attws.com/NWS/. A “bomain.key” file is required in order to access the Business Objects server.

6.2.1.2

Prospect Access

The Prospect Performance reporting system is nationally based. • The Prospect client software and installation instructions are available at http://ossweb.sc.attws.com/PES/APPS/Prospect/.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 100 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 • Credentials can be obtained by going to http://dataops.sc.attws.com/OSS/Account/Request.htm. Click on “P” for Prospect. • The web interface is accessible via http://alnpspctweb03.wnsnet.attws.com:8080/pweb/login.jsp

6.2.1.3

Tektronix Probe Access

The Tektronix Probe reporting system is nationally based. • Credentials can be obtained by going to http://ns.cingular.net/sites/nis/operations_support_systems/account_request_hub.aspx. Click on “G” for GeoProbe. • The Citrix interface is accessible via 10.36.12.106. User Documentation can be found here http://nebot.wnsnet.attws.com/docs/nis/geoprobe/quickstart.htm.

6.2.2 Ericsson Counter Types Ericsson has seven different types of counters. Each type is designated based upon how each counter is created. • Peg Counter. A Peg Counter is simply incremented by 1 at each occurrence of a specific event. All Peg Counters begin with pm… • Gauge Counter. A Gauge Counter can be increased or decreased depending upon the activity in the system. All Gauge Counters begin with pm… • Accumulator. An Accumulator Counter is increased by the value of a sample. The result is the sum of the values of the samples taken over the sample interval. Accumulator counters always begin with pmSum… or pmSumOfSamp… • Scan Counter. A Scan Counter is incremented by 1 each time a specific condition exists when scanned. Scans for the condition occur at regular intervals. In most cases a separate counter exists that counts the number of scans. All Scan Counters begin with pmSamples… • Probability Density Function (PDF). These types of counters result from periodically reading the value of a quantity. The value is then used to increment a corresponding counter. The counters are arranged in bins that represent segments of the range of possible values. All Probability Density Function counters begin with pm… • Discrete Distributed Measurement (DDM). Discrete Distributed Measurements are a series of values recorded during a reporting period. At the end of the reporting period, each discrete measurement is recorded. All Discrete Distributed Measurements begin with pm… • Calculated Statistics. A Calculated Statistic results from a calculation made in the database. The counters that contribute to the calculated value may or may not exist by themselves. All Calculated Statistics begin with cm…

Counters can also be grouped based upon where they are created. • RNC Counters • Node B Counters • RXI Counters • OSS-RC Counters. These include only Calculated Statistics.

6.2.3 Call Trace Capability Ericsson supports three different types of call trace called UETR, CTR and GPEH. Each is briefly described below. Each is launched from the Performance menu in the OSS Network Explorer.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 101 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 • UETR. The User Equipment Traffic Recording capability allows for up to 16 specified UEs to be concurrently traced on a single RNC. The individual UEs are specified by IMSI. One or more event or measurement messages within one or more of the following protocol groups can be recorded: NBAP, RANAP, RNSAP and RRC.

Although only one UE can be traced per UETR session, up to 16 concurrent sessions can be run on a single RNC. • CTR. Cell Traffic Recording allows for the collection of one or more NBAP, RANAP, RNSAP or RRC event or measurement messages from the first 16 UEs that request an RRC Connection setup on the specified cell. Up to 2 CTR recordings can be run concurrently. • GPEH. The General Performance and Event Handling capability records internal node and inter-node events as defined in a GPEH subscription profile.

6.3

Fault Management

Fault Management allows for the identification of network elements that are currently, or have recently been in a compromised condition due to a hardware or software failure. Ericsson provides tools that allow the user to view network elements currently in fault. A fault history is also available for each network element.

6.3.1 Alarm Status Matrix The Alarm Status Matrix provides a graphical overview of the fault status of network elements. The status of the network element is indicated by its color. The Alarm List Viewer is available via the OSS by right clicking on the desktop, then Alarm, View Alarms, Alarm Status Matrix. After running Alarm Status Matrix, you must select a group of Managed Objects by clicking on File, then Managed Objects and selecting the appropriate network element. The Alarm Status Matrix is typically the starting point for determining the status of the network.

6.3.2 Alarm List Viewer The Alarm List Viewer is available via the OSS by right clicking on the desktop, then Alarm, View Alarms, Alarm List Viewer. Current alarms for a network element or group of network elements can be viewed by clicking on File, then Managed Objects and selecting the appropriate network element.

6.3.3 Alarm Log Browser Running the Alarm Log Browser starts an alarm search wizard that allows the user to input variables such as date / time range and network element selection. It also allows for result filtering and sorting. The result can provide a historical view of the faults of a particular network element.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 102 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

7. Counter and Recording Activation 7.1

Counter Activation

In order for counter values to be placed in the OSS-RC database, they must be activated for collection. There are limitations for the number of counters that may be activated concurrently.

–

RNC – 750,000 counters

–

Node B – 10,000 counters

–

RXI – 50,000 counters

An alarm is triggered if the maximum number of counters is exceeded.

7.1.1 Table Definitions The table below contains all of the operator available Ericsson UTRAN counters and an indication of whether or not each should be activated. The columns are explained as follows. • Column A indicates the Managed Object (MO) to which each Counter belongs. • Column B indicates the “Level” for each Counter, e.g. “Site”, “Cell”, “Transport”, ect. Note that the “Cell” based counters are gathered at the RNC due to most of them being attributed to the Best Cell in the Active Set. • Column C indicates the Counter name. • Column D indicates whether the counter should be activated or not. If the counter should be activated, the field indicates the Scanner Name. See the Implementation section below for suggested Scanner Names. • Column E provides a reason for the counter’s activation, e.g. “Level 1 Scorecard”, “Dimensioning”, etc.

There is also a companion Excel spreadsheet. The “Counters” sheet contains all of the operator available Ericsson UTRAN counters The “Revision Notes” sheet contains details concerning how and why each counter was activated.

7.1.2 Subscription Profiles A Data Collection Subscription Profile, also known as a “Statistics Profile” or a “Scanner” defines specific counters activated within one or more Radio Network Controller (RNC) served by an OSS. There are two predefined RNC based Scanners called the “Primary Scanner” and the “Secondary Scanner” and a predefined Site based Scanner. You may at your discretion, choose to define User Defined Scanners per OSS or per Market.

7.1.2.1

Define UD Scanners per OSS

• Pro: Easier to work with, simpler to standardize. • Pro: Allows for fewer Scanners.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 103 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

• Con: Sites can only be added to a profile if all the selected sites have IP connectivity. This is difficult to achieve since there almost always a site that has connection issues.

Example UD Scanner names: • National_RNC_P5MD • National_URel_P5MD • National_Site_P5MD • National_RXI_P5MD

7.1.2.2

Defining UD Scanners per Market

• Pros: Easier to add new sites to a Scanner since site failures in other RNCs will only affect those Scanners. • Con: More difficult to manage.

Example UD Scanner names: • National_RNC_P5MD - keep all RNCs grouped • National_URel_P5MD - keep all URel grouped • National_RXI_P5MD - keep all RXI grouped • National_AtlaSite_P5MD • National_MargSite_P5MD • National_PrrnSite_P5MD

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 104 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Table 19: Counter Activation MO Class

Resolution

Counter

Active within scanner

Aal0TpVccTp

Transport - RNC

pmBwErrBlocks

No

Aal0TpVccTp

Transport - RNC

pmBwLostCells

No

Aal0TpVccTp

Transport - RNC

pmBwMissinsCells

No

Aal0TpVccTp

Transport - RNC

pmFwErrBlocks

No

Aal0TpVccTp

Transport - RNC

pmFwLostCells

National_RNC_P5MD

Aal0TpVccTp

Transport - RNC

pmFwMissinsCells

No

Aal0TpVccTp

Transport - RNC

pmLostBrCells

National_RNC_P5MD

Troubleshooting

Aal0TpVccTp

Transport - RNC

pmLostFpmCells

National_RNC_P5MD

Troubleshooting

Aal1TpVccTp

Transport

pmBwErrBlocks

No

Aal1TpVccTp

Transport

pmBwLostCells

No

Aal1TpVccTp

Transport

pmBwMissinsCells

No

Aal1TpVccTp

Transport

pmFwErrBlocks

No

Aal1TpVccTp

Transport

pmFwLostCells

No

Aal1TpVccTp

Transport

pmFwMissinsCells

No

Aal1TpVccTp

Transport

pmLostBrCells

No

Reason

Troubleshooting

Aal1TpVccTp

Transport

pmLostFpmCells

No

Aal2Ap

Transport - RNC

pmExisOrigConns

No

Aal2Ap

Transport - RNC

pmExisTermConns

No

Aal2Ap

Transport - RNC

pmExisTransConns

No

Aal2Ap

Transport - RNC

pmNrOfRemotelyBlockedAal2Path

No

Aal2Ap

Transport - RNC

pmSuccInConnsRemote

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmSuccInConnsRemoteQosClassA

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmSuccInConnsRemoteQosClassB

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmSuccInConnsRemoteQosClassC

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmSuccInConnsRemoteQosClassD

No

Aal2Ap

Transport - RNC

pmSuccOutConnsRemote

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmSuccOutConnsRemoteQosClassA

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmSuccOutConnsRemoteQosClassB

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmSuccOutConnsRemoteQosClassC

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmSuccOutConnsRemoteQosClassD

No

Aal2Ap

Transport - RNC

pmUnRecMessages

No

Aal2Ap

Transport - RNC

pmUnRecParams

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 105 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

Aal2Ap

Transport - RNC

pmUnSuccInConnsLocalQosClassA

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmUnSuccInConnsLocalQosClassB

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmUnSuccInConnsLocalQosClassC

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmUnSuccInConnsLocalQosClassD

No

Aal2Ap

Transport - RNC

pmUnSuccInConnsRemoteQosClassA

National_RNC_P5MD

Aal2Ap

Transport - RNC

pmUnSuccInConnsRemoteQosClassB

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmUnSuccInConnsRemoteQosClassC

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmUnSuccInConnsRemoteQosClassD

No

Aal2Ap

Transport - RNC

pmUnSuccOutConnsLocalQosClassA

No

Aal2Ap

Transport - RNC

pmUnSuccOutConnsLocalQosClassB

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmUnSuccOutConnsLocalQosClassC

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmUnSuccOutConnsLocalQosClassD

No

Troubleshooting

Aal2Ap

Transport - RNC

pmUnSuccOutConnsRemoteQosClassA

No

Aal2Ap

Transport - RNC

pmUnSuccOutConnsRemoteQosClassB

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmUnSuccOutConnsRemoteQosClassC

National_RNC_P5MD

Troubleshooting

Aal2Ap

Transport - RNC

pmUnSuccOutConnsRemoteQosClassD

No

Aal2PathVccTp

Transport - RNC

pmBwErrBlocks

No

Aal2PathVccTp

Transport - RNC

pmBwLostCells

No

Aal2PathVccTp

Transport - RNC

pmBwMissinsCells

No

Aal2PathVccTp

Transport - RNC

pmDiscardedEgressCpsPackets

No

Aal2PathVccTp

Transport - RNC

pmEgressCpsPackets

No

Aal2PathVccTp

Transport - RNC

pmFwErrBlocks

No

Aal2PathVccTp

Transport - RNC

pmFwLostCells

National_RNC_P5MD

Aal2PathVccTp

Transport - RNC

pmFwMissinsCells

No

Aal2PathVccTp

Transport - RNC

pmIngressCpsPackets

No

Aal2PathVccTp

Transport - RNC

pmLostBrCells

National_RNC_P5MD

Troubleshooting

Aal2PathVccTp

Transport - RNC

pmLostFpmCells

National_RNC_P5MD

Troubleshooting

Aal2Sp

Transport - RNC

pmUnsuccessfulConnsInternal

No

Aal5TpVccTp

Transport - RNC

pmBwErrBlocks

No

Aal5TpVccTp

Transport - RNC

pmBwLostCells

No

Aal5TpVccTp

Transport - RNC

pmBwMissinsCells

No

Aal5TpVccTp

Transport - RNC

pmFwErrBlocks

No

Aal5TpVccTp

Transport - RNC

pmFwLostCells

National_RNC_P5MD

Aal5TpVccTp

Transport - RNC

pmFwMissinsCells

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 106 of 170 © 2007 AT&T

Troubleshooting

Troubleshooting

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

Aal5TpVccTp

Transport - RNC

pmLostBrCells

National_RNC_P5MD

Troubleshooting

Aal5TpVccTp

Transport - RNC

pmLostFpmCells

National_RNC_P5MD

Troubleshooting

AgpsPositioning

RNC

pmPositioningReqAttAgps

No

Add when AGPS is GA

AgpsPositioning

RNC

pmPositioningReqAttEsAgps

No

Add when AGPS is GA

AgpsPositioning

RNC

pmPositioningReqSuccAgps

No

Add when AGPS is GA

AgpsPositioning

RNC

pmPositioningReqSuccAgpsQosSucc

No

Add when AGPS is GA

AgpsPositioning

RNC

pmPositioningReqSuccEsAgps

No

Add when AGPS is GA

AgpsPositioning

RNC

pmPositioningReqSuccEsAgpsQosSucc

No

Add when AGPS is GA

AgpsPositioning

RNC

pmPositioningReqUnsuccAgpsAbort

No

Add when AGPS is GA

Aich

Site

pmNegativeMessages

National_Site_P5MD

Troubleshooting

Aich

Site

pmPositiveMessages

National_Site_P5MD

Troubleshooting

AntennaBranch

Site

pmNoOfPowLimSlots

Troubleshooting

AtmPort

Transport - RNC/Site

pmReceivedAtmCells

AtmPort

Transport - RNC/Site

pmSecondsWithUnexp

AtmPort

Transport - RNC/Site

pmTransmittedAtmCells

Carrier

Site

pmAverageRssi

National_Site_P5MD National_RNC_P5MD/National_ Site_P5MD No National_RNC_P5MD/National_ Site_P5MD RBS Primary

Carrier

Site

pmTransmittedCarrierPower

RBS Primary

PREDEF.PRIMARYSTATS - Dimensioning

CcDevice

RNC

pmSamplesMeasuredCcSpLoad

Secondary Scanner

Secondary Scanner

CcDevice

RNC

pmSumMeasuredCcSpLoad

Secondary Scanner

Secondary Scanner

CchFrameSynch

RNC

pmNoCchDiscardedDataFramesE

No

CchFrameSynch

RNC

pmNoCchDiscardedDataFramesL

No No

Dimensioning

Dimensioning PREDEF.PRIMARY.STATS

CchFrameSynch

RNC

pmNoCchTimingAdjContrFrames

DcDevice

RNC

pmSamplesMeasuredDcSpLoad

Secondary Scanner

Secondary Scanner

DcDevice

RNC

pmSumMeasuredDcSpLoad

Secondary Scanner

Secondary Scanner

DchFrameSynch

RNC

pmNoDchDlTimingAdjContrFrames

No

DchFrameSynch

RNC

pmNoDchUlDataFramesOutsideWindow

No

DchFrameSynch

RNC

pmNoDlDchDiscardedDataFramesE

No

DchFrameSynch

RNC

pmNoDlDchDiscardedDataFramesL

No

DchFrameSynch

RNC

pmNoUlDchDiscardedDataFramesE

No No

DchFrameSynch

RNC

pmNoUlDchDiscardedDataFramesL

DownlinkBaseBandPool

Site

pmApomcOfMdlr

No

DownlinkBaseBandPool

Site

pmApomcOfMdsr

No

DownlinkBaseBandPool

Site

pmApomcOfSpreadersUsed

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 107 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

DownlinkBaseBandPool

Site

pmNoOfRadioLinksSf128

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRadioLinksSf16

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRadioLinksSf256

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRadioLinksSf32

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRadioLinksSf4

No

Sf4 not supported in the Downlink

DownlinkBaseBandPool

Site

pmNoOfRadioLinksSf64

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRadioLinksSf8

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRlAdditionFailuresSf128

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRlAdditionFailuresSf16

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRlAdditionFailuresSf256

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRlAdditionFailuresSf32

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRlAdditionFailuresSf4

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRlAdditionFailuresSf64

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmNoOfRlAdditionFailuresSf8

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupAttemptsSf128

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupAttemptsSf16

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupAttemptsSf256

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupAttemptsSf32

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupAttemptsSf4

No

Sf4 not supported in the Downlink

DownlinkBaseBandPool

Site

pmSetupAttemptsSf64

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupAttemptsSf8

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupFailuresSf128

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupFailuresSf16

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupFailuresSf256

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupFailuresSf32

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupFailuresSf4

No

Sf4 not supported in the Downlink

DownlinkBaseBandPool

Site

pmSetupFailuresSf64

National_Site_P5MD

Dimensioning

DownlinkBaseBandPool

Site

pmSetupFailuresSf8

National_Site_P5MD

Dimensioning

E1PhysPathTerm

Transport

pmEs

No

E1PhysPathTerm

Transport

pmSes

No

E1PhysPathTerm

Transport

pmUas

No

E1Ttp

Transport

pmEs

No

E1Ttp

Transport

pmSes

No

E1Ttp

Transport

pmUas

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 108 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

E3PhysPathTerm

Transport

pmEs

No

Reason

E3PhysPathTerm

Transport

pmSes

No

E3PhysPathTerm

Transport

pmUas

No

EDchResources

Site

pmCommonChPowerEul

National_Site_P5MD

Dimensioning

EDchResources

Site

pmNoActive10msFramesEul

National_Site_P5MD

Dimensioning

EDchResources

Site

pmNoAllowedEul

National_Site_P5MD

Dimensioning

EDchResources

Site

pmNoiseFloor

National_Site_P5MD

Dimensioning

EDchResources

Site

pmNoSchEdchEul

National_Site_P5MD

Dimensioning

EDchResources

Site

pmNoUlUuLoadLimitEul

National_Site_P5MD

Dimensioning

EDchResources

Site

pmOwnUuLoad

National_Site_P5MD

Dimensioning

EDchResources

Site

pmSumAckedBitsCellEul

National_Site_P5MD

Troubleshooting Troubleshooting

EDchResources

Site

pmSumNackedBitsCellEul

National_Site_P5MD

EDchResources

Site

pmTotalRotCoverage

National_Site_P5MD

Dimensioning

EDchResources

Site

pmTotRateGrantedEul

National_Site_P5MD

Dimensioning

EDchResources

Site

pmWaitingTimeEul

National_Site_P5MD

Dimensioning

EthernetLink

Transport

pmNoOfIfInDiscards

No

EthernetLink

Transport

pmNoOfIfInErrors

No

EthernetLink

Transport

pmNoOfIfInNUcastPkts

No

EthernetLink

Transport

pmNoOfIfInUcastPkts

No

EthernetLink

Transport

pmNoOfifOutDiscards

No

EthernetLink

Transport

pmNoOfIfOutNUcastPkts

No

EthernetLink

Transport

pmNoOfIfOutUcastPkts

No

Eul

RNC

pmEulDowntimeAuto

National_Site_P5MD

Troubleshooting

Eul

RNC

pmEulDowntimeMan

National_Site_P5MD

Troubleshooting

FastEthernet

RNC

pmIfInBroadcastPkts

No

FastEthernet

RNC

pmIfInDiscards

No

FastEthernet

RNC

pmIfInErrors

No

FastEthernet

RNC

pmIfInMulticastPkts

No

FastEthernet

RNC

pmIfInOctetsHi

No

FastEthernet

RNC

pmIfInOctetsLo

No

FastEthernet

RNC

pmIfInUcastPkts

No

FastEthernet

RNC

pmIfInUnknownProtos

No

FastEthernet

RNC

pmIfOutBroadcastPkts

No

FastEthernet

RNC

pmIfOutDiscards

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 109 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

FastEthernet

RNC

pmIfOutErrors

No

FastEthernet

RNC

pmIfOutMulticastPkts

No

FastEthernet

RNC

pmIfOutOctetsHi

No

FastEthernet

RNC

pmIfOutOctetsLo

No

FastEthernet

RNC

pmIfOutUcastPkts

No

GigaBitEthernet

RNC

pmDot1qTpVlanPortInDiscardsLink1

No

GigaBitEthernet

RNC

pmDot1qTpVlanPortInDiscardsLink2

No

GigaBitEthernet

RNC

pmIfInBroadcastPktsLink1

No

GigaBitEthernet

RNC

pmIfInBroadcastPktsLink2

No

GigaBitEthernet

RNC

pmIfInDiscardsLink1

No

GigaBitEthernet

RNC

pmIfInDiscardsLink2

No

GigaBitEthernet

RNC

pmIfInErrorsLink1

No

GigaBitEthernet

RNC

pmIfInErrorsLink2

No

GigaBitEthernet

RNC

pmIfInMulticastPktsLink1

No

GigaBitEthernet

RNC

pmIfInMulticastPktsLink2

No

GigaBitEthernet

RNC

pmIfInOctetsLink1Hi

No

GigaBitEthernet

RNC

pmIfInOctetsLink1Lo

No

GigaBitEthernet

RNC

pmIfInOctetsLink2Hi

No

GigaBitEthernet

RNC

pmIfInOctetsLink2Lo

No

GigaBitEthernet

RNC

pmIfInUcastPktsLink1

No

GigaBitEthernet

RNC

pmIfInUcastPktsLink2

No

GigaBitEthernet

RNC

pmIfInUnknownProtosLink1

No

GigaBitEthernet

RNC

pmIfInUnknownProtosLink2

No

GigaBitEthernet

RNC

pmIfOutBroadcastPktsLink1

No

GigaBitEthernet

RNC

pmIfOutBroadcastPktsLink2

No

GigaBitEthernet

RNC

pmIfOutDiscardsLink1

No

GigaBitEthernet

RNC

pmIfOutDiscardsLink2

No

GigaBitEthernet

RNC

pmIfOutErrorsLink1

No

GigaBitEthernet

RNC

pmIfOutErrorsLink2

No

GigaBitEthernet

RNC

pmIfOutMulticastPktsLink1

No

GigaBitEthernet

RNC

pmIfOutMulticastPktsLink2

No

GigaBitEthernet

RNC

pmIfOutOctetsLink1Hi

No

GigaBitEthernet

RNC

pmIfOutOctetsLink1Lo

No

GigaBitEthernet

RNC

pmIfOutOctetsLink2Hi

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 110 of 170 © 2007 AT&T

Reason

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

GigaBitEthernet

RNC

pmIfOutOctetsLink2Lo

No

Reason

GigaBitEthernet

RNC

pmIfOutUcastPktsLink1

No

GigaBitEthernet

RNC

pmIfOutUcastPktsLink2

No

GsmRelation

Inter-RAT

pmNoAttOutIratHoCs57

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoAttOutIratHoMulti

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoAttOutIratHoSpeech

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoAttOutIratHoStandalone

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoAttOutSbHoSpeech

No

Add when SBHO is GA

GsmRelation

Inter-RAT

pmNoFailOutIratHoCs57GsmFailure

National_RNC_P5MD

Level 3 Scorecard Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoCs57ReturnOldChNotPhyChFail

National_RNC_P5MD

GsmRelation

Inter-RAT

pmNoFailOutIratHoCs57ReturnOldChPhyChFail

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoCs57UeRejection

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoMultiGsmFailure

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoMultiReturnOldChNotPhyChFail

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoMultiReturnOldChPhyChFail

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoMultiUeRejection

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoSpeechGsmFailure

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoSpeechReturnOldChNotPhyChFail

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoSpeechReturnOldChPhyChFail

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoSpeechUeRejection

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoStandaloneGsmFailure

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoStandaloneReturnOldChNotPhyChFail

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoStandaloneReturnOldChPhyChFail

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutIratHoStandaloneUeRejection

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoFailOutSbHoSpeechGsmFailure

No

Add when SBHO is GA

GsmRelation

Inter-RAT

pmNoFailOutSbHoSpeechReturnOldChNotPhyChFail

No

Add when SBHO is GA

GsmRelation

Inter-RAT

pmNoFailOutSbHoSpeechReturnOldChPhyChFail

No

Add when SBHO is GA

GsmRelation

Inter-RAT

pmNoFailOutSbHoSpeechUeRejection

No

Add when SBHO is GA

GsmRelation

Inter-RAT

pmNoOutIratCcAtt

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoOutIratCcReturnOldCh

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoOutIratCcSuccess

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoSuccessOutIratHoCs57

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoSuccessOutIratHoMulti

National_RNC_P5MD

Level 1 and 3 Scorecard

GsmRelation

Inter-RAT

pmNoSuccessOutIratHoSpeech

National_RNC_P5MD

Level 1 and 3 Scorecard

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 111 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

GsmRelation

Inter-RAT

pmNoSuccessOutIratHoStandalone

National_RNC_P5MD

Level 3 Scorecard

GsmRelation

Inter-RAT

pmNoSuccessOutSbHoSpeech

No

Add when SBHO is GA

Handover

RNC

pmNoSbHoMeasStart

No

Add when SBHO is GA

Handover

RNC

pmNoSuccessSbHo

No

Add when SBHO is GA

Handover

RNC

pmTotNoSbHo

No

Add when SBHO is GA

Hsdsch

Cell

pmHsDowntimeAuto

Primary Scanner

Primary Scanner

Hsdsch

Cell

pmHsDowntimeMan

Primary Scanner

Primary Scanner Troubleshooting

HsDschResources

Site

pmAckReceived

National_Site_P5MD

HsDschResources

Site

pmAverageUserRate

National_Site_P5MD

Dimensioning

HsDschResources

Site

pmIubMacdPduCellReceivedBits

National_Site_P5MD

Dimensioning

HsDschResources

Site

pmNackReceived

National_Site_P5MD

Troubleshooting

HsDschResources

Site

pmNoActiveSubFrames

National_Site_P5MD

Troubleshooting

HsDschResources

Site

pmNoInactiveRequiredSubFrames

National_Site_P5MD

Troubleshooting

HsDschResources

Site

pmNoOfHsUsersPerTti

National_Site_P5MD

Dimensioning

HsDschResources

Site

pmRemainingResourceCheck

National_Site_P5MD

Dimensioning

HsDschResources

Site

pmReportedCqi

National_Site_P5MD

Troubleshooting

HsDschResources

Site

pmSampleNumHsPdschCodesAdded

National_Site_P5MD

Dimensioning

HsDschResources

Site

pmSumAckedBits

National_Site_P5MD

Troubleshooting

HsDschResources

Site

pmSumNonEmptyUserBuffers

National_Site_P5MD

Troubleshooting

HsDschResources

Site

pmSumNumHsPdschCodesAdded

National_Site_P5MD

Dimensioning

HsDschResources

Site

pmSumOfHsScchUsedPwr

National_Site_P5MD

Dimensioning

HsDschResources

Site

pmSumTransmittedBits

National_Site_P5MD

Dimensioning

HsDschResources

Site

pmTransmittedCarrierPowerNonHs

National_Site_P5MD

Dimensioning

HsDschResources

Site

pmUsedCqi

National_Site_P5MD

Troubleshooting

ImaGroup

Transport

pmGrFc

No

ImaGroup

Transport

pmGrFcFe

No

ImaGroup

Transport

pmGrUasIma

No

ImaLink

Transport - Site

pmIvIma

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmOifIma

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmRxFc

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmRxFcFe

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmRxStuffIma

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmRxUusIma

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmRxUusImaFe

National_Site_P5MD

Troubleshooting

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 112 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

ImaLink

Transport - Site

pmSesIma

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmSesImaFe

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmTxFc

National_Site_P5MD

Troubleshooting Troubleshooting

ImaLink

Transport - Site

pmTxFcFe

National_Site_P5MD

ImaLink

Transport - Site

pmTxStuffIma

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmTxUusIma

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmTxUusImaFe

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmUasIma

National_Site_P5MD

Troubleshooting

ImaLink

Transport - Site

pmUasImaFe

National_Site_P5MD

Troubleshooting

Ip

Transport

pmNoOfHdrErrors

No

Ip

Transport

pmNoOfIpAddrErrors

No

Ip

Transport

pmNoOfIpForwDatagrams

No

Ip

Transport

pmNoOfIpInDiscards

No

Ip

Transport

pmNoOfIpInReceives

No

Ip

Transport

pmNoOfIpOutDiscards

No

Ip

Transport

pmNoOfIpReasmOKs

No

Ip

Transport

pmNoOfIpReasmReqds

No

IpAccessHostGpb

Transport

pmIcmpInDestUnreachs

No

IpAccessHostGpb

Transport

pmIcmpInEchoReps

No

IpAccessHostGpb

Transport

pmIcmpInEchos

No

IpAccessHostGpb

Transport

pmIcmpInErrors

No

IpAccessHostGpb

Transport

pmIcmpInMsgs

No

IpAccessHostGpb

Transport

pmIcmpInParamProbs

No

IpAccessHostGpb

Transport

pmIcmpInRedirects

No

IpAccessHostGpb

Transport

pmIcmpInSrcQuenchs

No

IpAccessHostGpb

Transport

pmIcmpInTimeExcds

No

IpAccessHostGpb

Transport

pmIcmpOutDestUnreachs

No

IpAccessHostGpb

Transport

pmIcmpOutEchoReps

No

IpAccessHostGpb

Transport

pmIcmpOutEchos

No

IpAccessHostGpb

Transport

pmIcmpOutErrors

No

IpAccessHostGpb

Transport

pmIcmpOutMsgs

No

IpAccessHostGpb

Transport

pmIcmpOutParmProbs

No

IpAccessHostGpb

Transport

pmIpFragCreates

No

IpAccessHostGpb

Transport

pmIpFragFails

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 113 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

IpAccessHostGpb

Transport

pmIpFragOKs

No

IpAccessHostGpb

Transport

pmIpInAddrErrors

No

IpAccessHostGpb

Transport

pmIpInDelivers

No

IpAccessHostGpb

Transport

pmIpInDiscards

No

IpAccessHostGpb

Transport

pmIpInHdrErrors

No

IpAccessHostGpb

Transport

pmIpInReceives

No

IpAccessHostGpb

Transport

pmIpInUnknownProtos

No No

IpAccessHostGpb

Transport

pmIpOutDiscards

IpAccessHostGpb

Transport

pmIpOutRequests

No

IpAccessHostGpb

Transport

pmIpReasmFails

No

IpAccessHostGpb

Transport

pmIpReasmOKs

No

IpAccessHostGpb

Transport

pmIpReasmReqds

No

IpAccessHostGpb

Transport

pmUdpInDatagrams

No

IpAccessHostGpb

Transport

pmUdpInErrors

No

IpAccessHostGpb

Transport

pmUdpNoPorts

No

IpAccessHostGpb

Transport

pmUdpOutDatagrams

No

IpAccessHostSpb

RNC

pmIcmpInDestUnreachs

No

IpAccessHostSpb

RNC

pmIcmpInEchoReps

No

IpAccessHostSpb

RNC

pmIcmpInEchos

No

IpAccessHostSpb

RNC

pmIcmpInErrors

No

IpAccessHostSpb

RNC

pmIcmpInMsgs

No

IpAccessHostSpb

RNC

pmIcmpInParamProbs

No

IpAccessHostSpb

RNC

pmIcmpInRedirects

No

IpAccessHostSpb

RNC

pmIcmpInSrcQuenchs

No

IpAccessHostSpb

RNC

pmIcmpInTimeExcds

No

IpAccessHostSpb

RNC

pmIcmpOutDestUnreachs

No

IpAccessHostSpb

RNC

pmIcmpOutEchoReps

No

IpAccessHostSpb

RNC

pmIcmpOutEchos

No

IpAccessHostSpb

RNC

pmIcmpOutErrors

No

IpAccessHostSpb

RNC

pmIcmpOutMsgs

No

IpAccessHostSpb

RNC

pmIcmpOutParmProbs

No

IpAccessHostSpb

RNC

pmIpFragCreates

No

IpAccessHostSpb

RNC

pmIpFragFails

No

IpAccessHostSpb

RNC

pmIpFragOKs

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 114 of 170 © 2007 AT&T

Reason

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

IpAccessHostSpb

RNC

pmIpInAddrErrors

No

IpAccessHostSpb

RNC

pmIpInDelivers

No

IpAccessHostSpb

RNC

pmIpInDiscards

No

IpAccessHostSpb

RNC

pmIpInHdrErrors

No

IpAccessHostSpb

RNC

pmIpInReceives

No

IpAccessHostSpb

RNC

pmIpInUnknownProtos

No

IpAccessHostSpb

RNC

pmIpOutDiscards

No

IpAccessHostSpb

RNC

pmIpOutRequests

No

IpAccessHostSpb

RNC

pmIpReasmFails

No

IpAccessHostSpb

RNC

pmIpReasmOKs

No

IpAccessHostSpb

RNC

pmIpReasmReqds

No

IpAccessHostSpb

RNC

pmUdpInDatagrams

No

IpAccessHostSpb

RNC

pmUdpInErrors

No

IpAccessHostSpb

RNC

pmUdpNoPorts

No

IpAccessHostSpb

RNC

pmUdpOutDatagrams

No

IpAtmLink

Transport

pmNoOfIfInDiscards

No

IpAtmLink

Transport

pmNoOfIfInErrors

No

IpAtmLink

Transport

pmNoOfIfInNUcastPkts

No

IpAtmLink

Transport

pmNoOfIfInUcastPkts

No

IpAtmLink

Transport

pmNoOfifOutDiscards

No

IpAtmLink

Transport

pmNoOfIfOutNUcastPkts

No

IpAtmLink

Transport

pmNoOfIfOutUcastPkts

No

IpEthPacketDataRouter

RNC

pmNoFaultyIpPackets

No

IpEthPacketDataRouter

RNC

pmNoRoutedIpBytesDl

No

IpEthPacketDataRouter

RNC

pmNoRoutedIpBytesUl

No

IpEthPacketDataRouter

RNC

pmNoRoutedIpPacketsDl

No

IpEthPacketDataRouter

RNC

pmNoRoutedIpPacketsUl

No

IpEthPacketDataRouter

RNC

pmSamplesPacketDataRab

No

IpEthPacketDataRouter

RNC

pmSumPacketDataRab

No

IpInterface

RNC

pmDot1qTpVlanPortInFrames

No

IpInterface

RNC

pmDot1qTpVlanPortOutFrames

No

IpInterface

RNC

pmIfStatsIpAddrErrors

No

IpInterface

RNC

pmIfStatsIpInDiscards

No

IpInterface

RNC

pmIfStatsIpInHdrErrors

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 115 of 170 © 2007 AT&T

Reason

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

IpInterface

RNC

pmIfStatsIpInReceives

No

Reason

IpInterface

RNC

pmIfStatsIpOutDiscards

No

IpInterface

RNC

pmIfStatsIpOutRequests

No

IpInterface

RNC

pmIfStatsIpUnknownProtos

No

IubDataStreams

Site

pmCapAlloclubHsLimitingRatio

National_Site_P5MD

Dimensioning

IubDataStreams

Site

pmDchFramesCrcMismatch

National_Site_P5MD

Dimensioning

IubDataStreams

Site

pmDchFramesLate

National_Site_P5MD

Dimensioning

IubDataStreams

Site

pmDchFramesReceived

National_Site_P5MD

Dimensioning

IubDataStreams

Site

pmDchFramesTooLate

National_Site_P5MD

Dimensioning

IubDataStreams

Site

pmEdchIubLimitingRatio

National_Site_P5MD

Dimensioning

IubDataStreams

Site

pmHsDataFramesLost

National_Site_P5MD

Dimensioning

IubDataStreams

Site

pmHsDataFramesReceived

National_Site_P5MD

Dimensioning

IubDataStreams

Site

pmIubMacdPduRbsReceivedBits

National_Site_P5MD

Dimensioning

IubDataStreams

Site

pmNoUlIubLimitEul

National_Site_P5MD

Dimensioning

IubDataStreams

Site

pmRbsHsPdschCodePrio

National_Site_P5MD

Dimensioning

IubDataStreams

Site

pmTargetHsRate

National_Site_P5MD

Dimensioning

IubEdch

RNC

pmEdchDataFrameDelayIub

National_RNC_P5MD

Troubleshooting

IurLink

RNC

pmNoAttIncCnhhoCsNonSpeech

No

Add when CNHHO is GA

IurLink

RNC

pmNoAttIncCnhhoSpeech

No

Add when CNHHO is GA

IurLink

RNC

pmNoNormalRabReleaseCs64

Secondary Scanner

Secondary Scanner

IurLink

RNC

pmNoNormalRabReleaseCsStream

Secondary Scanner

Secondary Scanner

IurLink

RNC

pmNoNormalRabReleasePacket

Secondary Scanner

Secondary Scanner

IurLink

RNC

pmNoNormalRabReleasePacketStream

Secondary Scanner

Secondary Scanner Secondary Scanner

IurLink

RNC

pmNoNormalRabReleaseSpeech

Secondary Scanner

IurLink

RNC

pmNoOfRlForDriftingUesPerDrnc

Secondary Scanner

Secondary Scanner

IurLink

RNC

pmNoSuccIncCnhhoCsNonSpeech

No

Add when CNHHO is GA

IurLink

RNC

pmNoSuccIncCnhhoSpeech

No

Add when CNHHO is GA

IurLink

RNC

pmNoSystemRabReleaseCs64

Secondary Scanner

Secondary Scanner

IurLink

RNC

pmNoSystemRabReleaseCsStream

Secondary Scanner

Secondary Scanner

IurLink

RNC

pmNoSystemRabReleasePacket

Secondary Scanner

Secondary Scanner - Level 3 Scorecard

IurLink

RNC

pmNoSystemRabReleasePacketStream

Secondary Scanner

IurLink

RNC

pmNoSystemRabReleaseSpeech

Secondary Scanner

Secondary Scanner - Level 3 Scorecard Secondary Scanner - Level 1 and 3 Scorecard

J1PhysPathTerm

Transport

pmEs

No

J1PhysPathTerm

Transport

pmSes

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 116 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

J1PhysPathTerm

Transport

pmUas

No

LoadControl

RNC

pmAdmittedRequestsB0

No

LoadControl

RNC

pmAdmittedRequestsB1

No

LoadControl

RNC

pmAdmittedRequestsF0

No

LoadControl

RNC

pmAdmittedRequestsF1

No

LoadControl

RNC

pmAdmittedRequestsF2

No

LoadControl

RNC

pmAdmittedRequestsF3

No

LoadControl

RNC

pmAdmittedRequestsF4

No

LoadControl

RNC

pmRefusedRequestsB0

No

Reason

LoadControl

RNC

pmRefusedRequestsB1

No

LoadControl

RNC

pmRefusedRequestsF0

No

LoadControl

RNC

pmRefusedRequestsF1

No

LoadControl

RNC

pmRefusedRequestsF2

No

LoadControl

RNC

pmRefusedRequestsF3

No

LoadControl

RNC

pmRefusedRequestsF4

No

LoadControl

RNC

pmSamplesMeasuredLoad

Secondary Scanner

Secondary Scanner

LoadControl

RNC

pmSumMeasuredLoad

Secondary Scanner

Secondary Scanner

LocationArea

RNC

pmCnInitPagingToIdleUeLa

National_RNC_P5MD

Dimensioning

M3uAssociation

Transport

pmNoOfAspacAckReceived

No

M3uAssociation

Transport

pmNoOfAspacAckSent

No

M3uAssociation

Transport

pmNoOfAspacReceived

No

M3uAssociation

Transport

pmNoOfAspacSent

No

M3uAssociation

Transport

pmNoOfAspdnAckReceived

No

M3uAssociation

Transport

pmNoOfAspdnAckSent

No

M3uAssociation

Transport

pmNoOfAspdnReceived

No

M3uAssociation

Transport

pmNoOfAspdnSent

No

M3uAssociation

Transport

pmNoOfAspiaAckReceived

No

M3uAssociation

Transport

pmNoOfAspiaAckSent

No

M3uAssociation

Transport

pmNoOfAspiaReceived

No

M3uAssociation

Transport

pmNoOfAspiaSent

No

M3uAssociation

Transport

pmNoOfAspupAckReceived

No

M3uAssociation

Transport

pmNoOfAspupAckSent

No

M3uAssociation

Transport

pmNoOfAspupReceived

No

M3uAssociation

Transport

pmNoOfAspupSent

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 117 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

M3uAssociation

Transport

pmNoOfCommunicationLost

No

M3uAssociation

Transport

pmNoOfCongestions

No

M3uAssociation

Transport

pmNoOfDataMsgRec

No

M3uAssociation

Transport

pmNoOfDataMsgSent

No

M3uAssociation

Transport

pmNoOfDaudMsgRec

No

M3uAssociation

Transport

pmNoOfDaudMsgSent

No

M3uAssociation

Transport

pmNoOfDavaRec

No

M3uAssociation

Transport

pmNoOfDavaSent

No

M3uAssociation

Transport

pmNoOfDunaRec

No

M3uAssociation

Transport

pmNoOfDunaSent

No

M3uAssociation

Transport

pmNoOfDupuRec

No

M3uAssociation

Transport

pmNoOfDupuSent

No

M3uAssociation

Transport

pmNoOfErrorMsgRec

No

M3uAssociation

Transport

pmNoOfErrorMsgSent

No

M3uAssociation

Transport

pmNoOfM3uaDataMsgDiscarded

No

M3uAssociation

Transport

pmNoOfNotifyMsgRec

No

M3uAssociation

Transport

pmNoOfSconRec

No

M3uAssociation

Transport

pmNoOfSconSent

No

MediumAccessUnit

Transport

pmNoOfDot3StatsFCSErrors

No

MediumAccessUnit

Transport

pmNoOfDot3StatsLateCollisions

No

Mtp3bAp

Transport

pmNoOfAdjacentSPNotAccessible

No

Mtp3bAp

Transport

pmNoOfUserPartUnavailRec

No

Mtp3bSlAnsi

Transport

pmNoOfAALINServiceInd

No

Mtp3bSlChina

Transport

pmNoOfAALOUTInd

No

Mtp3bSlItu

Transport

pmNoOfCBDSent

No

Mtp3bSlTtc

Transport

pmNoOfCOOXCOSent

No

Mtp3bSlTtc

Transport

pmNoOfLocalLinkCongestCeaseRec

No

Mtp3bSlTtc

Transport

pmNoOfLocalLinkCongestRec

No

Mtp3bSlTtc

Transport

pmNoOfMSURec

No

Mtp3bSlTtc

Transport

pmNoOfMSUSent

No

Mtp3bSpAnsi

Transport

pmNoOfCBARec

No

Mtp3bSpAnsi

Transport

pmNoOfCBASent

No

Mtp3bSpAnsi

Transport

pmNoOfChangeBackDeclRec

No

Mtp3bSpAnsi

Transport

pmNoOfChangeOverRec

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 118 of 170 © 2007 AT&T

Reason

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Mtp3bSpAnsi

Transport

pmNoOfCOAXCARec

No

Mtp3bSpAnsi

Transport

pmNoOfCOAXCASent

No

Mtp3bSpAnsi

Transport

pmNoOfControlledRerouteSuccessPerf

No

Mtp3bSpAnsi

Transport

pmNoOfECARec

No

Mtp3bSpAnsi

Transport

pmNoOfECASent

No

Mtp3bSpAnsi

Transport

pmNoOfECOSent

No

Mtp3bSpAnsi

Transport

pmNoOfEmergencyChangeOverRec

No

Mtp3bSpAnsi

Transport

pmNoOfForcedRerouteSuccessPerf

No

Mtp3bSpAnsi

Transport

pmNoOfIncomingAssocEstabRequestInStateDownWhenStateEstabIsBlocked

No

Mtp3bSpAnsi

Transport

pmNoOfLowerPrioMsgDiscarded

No

Mtp3bSpAnsi

Transport

pmNoOfMaxTrialsForAssocActivReached

No

Mtp3bSpAnsi

Transport

pmNoOfMaxTrialsForAssocEstabReached

No

Mtp3bSpAnsi

Transport

pmNoOfSctpAssociationRestart

No

Mtp3bSpAnsi

Transport

pmNoOfSctpBufOverflow

No

Mtp3bSpAnsi

Transport

pmNoOfSctpCommunicationErr

No

Mtp3bSpAnsi

Transport

pmNoOfSctpNetworkStatusChange

No

Mtp3bSpAnsi

Transport

pmNoOfSctpResumeSending

No

Mtp3bSpAnsi

Transport

pmNoOfSctpSendFailure

No

Mtp3bSpAnsi

Transport

pmNoOfSLTAFirstTimeOutRec

No

Mtp3bSpAnsi

Transport

pmNoOfSLTASecondTimeOutRec

No

Mtp3bSpAnsi

Transport

pmNoOfSuccessAssocAbort

No

Mtp3bSpAnsi

Transport

pmNoOfSuccessAssocEstablish

No

Mtp3bSpAnsi

Transport

pmNoOfSuccessAssocShutDown

No No

Mtp3bSpAnsi

Transport

pmNoOfTimerT21WasStarted

Mtp3bSpAnsi

Transport

pmNoOfTRARec

No

Mtp3bSpAnsi

Transport

pmNoOfTRASent

No

Mtp3bSpAnsi

Transport

pmNoOfUnsuccessAssocEstablish

No

Mtp3bSpAnsi

Transport

pmNoOfUnsuccessForcedRerouting

No

Mtp3bSpAnsi

Transport

pmNoOfUPMsgDiscardedDueToRoutingErr

No

Mtp3bSpChina

Transport

pmNoOfCBARec

No

Mtp3bSpChina

Transport

pmNoOfCBASent

No

Mtp3bSpChina

Transport

pmNoOfChangeBackDeclRec

No

Mtp3bSpChina

Transport

pmNoOfChangeOverRec

No

Mtp3bSpChina

Transport

pmNoOfCOAXCARec

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 119 of 170 © 2007 AT&T

Reason

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Mtp3bSpChina

Transport

pmNoOfCOAXCASent

No

Mtp3bSpChina

Transport

pmNoOfControlledRerouteSuccessPerf

No

Mtp3bSpChina

Transport

pmNoOfECARec

No

Mtp3bSpChina

Transport

pmNoOfECASent

No

Mtp3bSpChina

Transport

pmNoOfECOSent

No

Mtp3bSpChina

Transport

pmNoOfEmergencyChangeOverRec

No

Mtp3bSpChina

Transport

pmNoOfForcedRerouteSuccessPerf

No

Mtp3bSpChina

Transport

pmNoOfIncomingAssocEstabRequestInStateDownWhenStateEstabIsBlocked

No

Mtp3bSpChina

Transport

pmNoOfLowerPrioMsgDiscarded

No

Mtp3bSpChina

Transport

pmNoOfMaxTrialsForAssocActivReached

No

Mtp3bSpChina

Transport

pmNoOfMaxTrialsForAssocEstabReached

No

Mtp3bSpChina

Transport

pmNoOfSctpAssociationRestart

No

Mtp3bSpChina

Transport

pmNoOfSctpBufOverflow

No

Mtp3bSpChina

Transport

pmNoOfSctpCommunicationErr

No

Mtp3bSpChina

Transport

pmNoOfSctpNetworkStatusChange

No

Mtp3bSpChina

Transport

pmNoOfSctpResumeSending

No

Mtp3bSpChina

Transport

pmNoOfSctpSendFailure

No

Mtp3bSpChina

Transport

pmNoOfSLTAFirstTimeOutRec

No

Mtp3bSpChina

Transport

pmNoOfSLTASecondTimeOutRec

No

Mtp3bSpChina

Transport

pmNoOfSuccessAssocAbort

No

Mtp3bSpChina

Transport

pmNoOfSuccessAssocEstablish

No

Mtp3bSpChina

Transport

pmNoOfSuccessAssocShutDown

No

Mtp3bSpChina

Transport

pmNoOfTimerT21WasStarted

No

Mtp3bSpChina

Transport

pmNoOfTRARec

No

Mtp3bSpChina

Transport

pmNoOfTRASent

No

Mtp3bSpChina

Transport

pmNoOfUnsuccessAssocEstablish

No

Mtp3bSpChina

Transport

pmNoOfUnsuccessForcedRerouting

No

Mtp3bSpChina

Transport

pmNoOfUPMsgDiscardedDueToRoutingErr

No

Mtp3bSpItu

Transport

pmNoOfCBARec

No

Mtp3bSpItu

Transport

pmNoOfCBASent

No

Mtp3bSpItu

Transport

pmNoOfChangeBackDeclRec

No

Mtp3bSpItu

Transport

pmNoOfChangeOverRec

No

Mtp3bSpItu

Transport

pmNoOfCOAXCARec

No

Mtp3bSpItu

Transport

pmNoOfCOAXCASent

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 120 of 170 © 2007 AT&T

Reason

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Mtp3bSpItu

Transport

pmNoOfControlledRerouteSuccessPerf

No

Mtp3bSpItu

Transport

pmNoOfECARec

No

Mtp3bSpItu

Transport

pmNoOfECASent

No

Mtp3bSpItu

Transport

pmNoOfECOSent

No

Mtp3bSpItu

Transport

pmNoOfEmergencyChangeOverRec

No

Mtp3bSpItu

Transport

pmNoOfForcedRerouteSuccessPerf

No

Mtp3bSpItu

Transport

pmNoOfIncomingAssocEstabRequestInStateDownWhenStateEstabIsBlocked

No

Mtp3bSpItu

Transport

pmNoOfLowerPrioMsgDiscarded

No

Mtp3bSpItu

Transport

pmNoOfMaxTrialsForAssocActivReached

No

Mtp3bSpItu

Transport

pmNoOfMaxTrialsForAssocEstabReached

No

Mtp3bSpItu

Transport

pmNoOfSctpAssociationRestart

No

Mtp3bSpItu

Transport

pmNoOfSctpBufOverflow

No

Mtp3bSpItu

Transport

pmNoOfSctpCommunicationErr

No

Mtp3bSpItu

Transport

pmNoOfSctpNetworkStatusChange

No

Mtp3bSpItu

Transport

pmNoOfSctpResumeSending

No

Mtp3bSpItu

Transport

pmNoOfSctpSendFailure

No

Mtp3bSpItu

Transport

pmNoOfSLTAFirstTimeOutRec

No

Mtp3bSpItu

Transport

pmNoOfSLTASecondTimeOutRec

No

Mtp3bSpItu

Transport

pmNoOfSuccessAssocAbort

No

Mtp3bSpItu

Transport

pmNoOfSuccessAssocEstablish

No

Mtp3bSpItu

Transport

pmNoOfSuccessAssocShutDown

No

Mtp3bSpItu

Transport

pmNoOfTimerT21WasStarted

No

Mtp3bSpItu

Transport

pmNoOfTRARec

No

Mtp3bSpItu

Transport

pmNoOfTRASent

No

Mtp3bSpItu

Transport

pmNoOfUnsuccessAssocEstablish

No

Mtp3bSpItu

Transport

pmNoOfUnsuccessAssocShutDown

Mtp3bSpItu

Transport

pmNoOfUnsuccessForcedRerouting

No

Mtp3bSpItu

Transport

pmNoOfUPMsgDiscardedDueToRoutingErr

No

Mtp3bSpTtc

Transport

pmNoOfSctpBufOverflow

Mtp3bSpTtc

Transport

pmInStateDownWhenStateEstabIsBlocked

Mtp3bSpTtc

Transport

pmNoOfCBARec

Mtp3bSpTtc

Transport

pmNoOfCBASent

No

Mtp3bSpTtc

Transport

pmNoOfChangeBackDeclRec

No

Mtp3bSpTtc

Transport

pmNoOfChangeOverRec

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

No

Page 121 of 170 © 2007 AT&T

Reason

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Mtp3bSpTtc

Transport

pmNoOfCOAXCARec

No

Mtp3bSpTtc

Transport

pmNoOfCOAXCASent

No

Mtp3bSpTtc

Transport

pmNoOfControlledRerouteSuccessPerf

No

Mtp3bSpTtc

Transport

pmNoOfECARec

No

Mtp3bSpTtc

Transport

pmNoOfECASent

No

Mtp3bSpTtc

Transport

pmNoOfECOSent

No

Mtp3bSpTtc

Transport

pmNoOfEmergencyChangeOverRec

No

Mtp3bSpTtc

Transport

pmNoOfForcedRerouteSuccessPerf

No

Mtp3bSpTtc

Transport

pmNoOfIncomingAssocEstabRequest

No

Mtp3bSpTtc

Transport

pmNoOfIncomingAssocEstabRequestInStateDownWhenStateEstabIsBlocked

No

Mtp3bSpTtc

Transport

pmNoOfMaxTrialsForAssocActivReached

No

Mtp3bSpTtc

Transport

pmNoOfMaxTrialsForAssocEstabReached

No

Mtp3bSpTtc

Transport

pmNoOfSctpAssociationRestart

No

Mtp3bSpTtc

Transport

pmNoOfSctpBufOverflow

No

Mtp3bSpTtc

Transport

pmNoOfSctpCommunicationErr

No

Mtp3bSpTtc

Transport

pmNoOfSctpNetworkStatusChange

No

Mtp3bSpTtc

Transport

pmNoOfSctpResumeSending

No

Mtp3bSpTtc

Transport

pmNoOfSctpSendFailure

No

Mtp3bSpTtc

Transport

pmNoOfSLTAFirstTimeOutRec

No

Mtp3bSpTtc

Transport

pmNoOfSLTASecondTimeOutRec

No

Mtp3bSpTtc

Transport

pmNoOfSuccessAssocAbort

No

Mtp3bSpTtc

Transport

pmNoOfSuccessAssocEstablish

No

Mtp3bSpTtc

Transport

pmNoOfSuccessAssocShutDown

No

Mtp3bSpTtc

Transport

pmNoOfTRARec

No

Mtp3bSpTtc

Transport

pmNoOfTRASent

No

Mtp3bSpTtc

Transport

pmNoOfUnsuccessAssocEstablish

No

Mtp3bSpTtc

Transport

pmNoOfUnsuccessAssocShutDown

No

Mtp3bSpTtc

Transport

pmNoOfUnsuccessForcedRerouting

No

Mtp3bSpTtc

Transport

pmNoOfUPMsgDiscardedDueToRoutingErr

No

Mtp3bSr

Transport

pmNoOfSecondsAccumulatedRouteUnavailable

No

Mtp3bSrs

Transport

pmNoOfDiscardedMsgFromBroadToNarrow

No

Mtp3bSrs

Transport

pmNoOfSecsAccRouteSetUnavailable

No

Mtp3bSrs

Transport

pmNoOfTransferAllowedRec

No

Mtp3bSrs

Transport

pmNoOfTransferControlledRec

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 122 of 170 © 2007 AT&T

Reason

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Mtp3bSrs

Transport

pmNoOfTransferProhibitedRec

No No

NbapCommon

Site

pmNoOfDiscardedMsg

NbapCommon

Site

pmNoOfDiscardedNbapMessages

National_Site_P5MD

NniSaalTp

Transport - RNC

pmLinkInServiceTime

No

NniSaalTp

Transport - RNC

pmNoOfAlignmentFailures

No

NniSaalTp

Transport - RNC

pmNoOfAllSLFailures

No

NniSaalTp

Transport - RNC

pmNoOfLocalCongestions

National_RNC_P5MD

NniSaalTp

Transport - RNC

pmNoOfNoResponses

No

NniSaalTp

Transport - RNC

pmNoOfOtherErrors

No

NniSaalTp

Transport - RNC

pmNoOfProtocolErrors

No

NniSaalTp

Transport - RNC

pmNoOfReceivedSDUs

No

NniSaalTp

Transport - RNC

pmNoOfRemoteCongestions

No

NniSaalTp

Transport - RNC

pmNoOfSentSDUs

No

NniSaalTp

Transport - RNC

pmNoOfSequenceDataLosses

No

NniSaalTp

Transport - RNC

pmNoOfUnsuccReTransmissions

No

Os155SpiTtp

Transport

pmMsBbe

No

Os155SpiTtp

Transport

pmMsEs

No

Os155SpiTtp

Transport

pmMsSes

No

Os155SpiTtp

Transport

pmMsUas

No

Ospf

Transport

pmNoOfOspfOriginateNewLsas

No

Ospf

Transport

pmNoOfOspfRxNewLsas

No

OspfArea

Transport

pmNoOfOspfSpfRuns

No

OspfInterface

Transport

pmNoOfOspfIfEvents

No

Reason

Dimensioning

Troubleshooting

PacketDataRouter

RNC

pmNoFaultyIpPackets

National_RNC_P5MD

Dimensioning

PacketDataRouter

RNC

pmNoRoutedIpBytesDl

National_RNC_P5MD

Dimensioning

PacketDataRouter

RNC

pmNoRoutedIpBytesUl

National_RNC_P5MD

Dimensioning

PacketDataRouter

RNC

pmNoRoutedIpPacketsDl

National_RNC_P5MD

Dimensioning Dimensioning

PacketDataRouter

RNC

pmNoRoutedIpPacketsUl

National_RNC_P5MD

PacketDataRouter

RNC

pmSamplesPacketDataRab

No

PacketDataRouter

RNC

pmSumPacketDataRab

No

Paging

RNC

pmCnInitPagingToIdleUe

No

Paging

RNC

pmNoPageDiscardCmpLoadC

National_RNC_P5MD

Dimensioning

PdrDevice

RNC

pmSamplesMeasuredPdrSpLoad

Secondary Scanner

Secondary Scanner

PdrDevice

RNC

pmSumMeasuredPdrSpLoad

Secondary Scanner

Secondary Scanner

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 123 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

Prach

Site

pmNoPreambleFalseDetection

National_Site_P5MD

Troubleshooting

Prach

Site

pmPopagationDelay

No

Prach

Site

pmReceivedPreambleSir

No

Prach

Site

pmSuccReceivedBlocks

No

Prach

Site

pmUnsuccReceivedBlocks

No

Rach

Cell

pmFaultyTransportBlocks

National_RNC_P5MD

Troubleshooting

Rach

Cell

pmNoRecRandomAccSuccess

National_RNC_P5MD

Troubleshooting Troubleshooting

Rach

Cell

pmTransportBlocks

National_RNC_P5MD

RadioLinks

Site

pmAverageSir

No

RadioLinks

Site

pmAverageSirError

No

RadioLinks

Site

pmDpcchBer

No

RadioLinks

Site

pmDpchCodePowerSf128

No

Consider activating

RadioLinks

Site

pmDpchCodePowerSf16

No

Consider activating

RadioLinks

Site

pmDpchCodePowerSf256

No

Consider activating

RadioLinks

Site

pmDpchCodePowerSf32

No

Consider activating

RadioLinks

Site

pmDpchCodePowerSf4

No

RadioLinks

Site

pmDpchCodePowerSf64

No

Consider activating

RadioLinks

Site

pmDpchCodePowerSf8

No

Consider activating

RadioLinks

Site

pmDpdchBer

No

RadioLinks

Site

pmOutOfSynch

National_Site_P5MD

Troubleshooting

RadioLinks

Site

pmRLSSupSynchToUnsynch

National_Site_P5MD

Troubleshooting

RadioLinks

Site

pmRLSSupWaitToOutOfSynch

National_Site_P5MD

Troubleshooting

RadioLinks

Site

pmUISynchTime

No

RadioLinks

Site

pmUISynchTimeSHO

No

Ranap

RNC

pmNnsfLoadDistributionRouted

No

Ranap

RNC

pmNnsfNriRouted

No

Rcs

RNC

pmNoReleaseCchWaitCuT

Secondary Scanner

Rcs

RNC

pmNoReleaseDchRcLostT

Secondary Scanner

Secondary Scanner

Rcs

RNC

pmNoRlcErrors

Secondary Scanner

Secondary Scanner

RncFunction

RNC

pmMocnRedirections

No

RncFunction

RNC

pmNoDiscardSduDcch

No

RncFunction

RNC

pmNoDiscardSduDtch

No

RncFunction

RNC

pmNoInvalidRabEstablishAttempts

National_RNC_P5MD

RncFunction

RNC

pmNoInvalidRabReleaseAttempts

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 124 of 170 © 2007 AT&T

Add when Streaming QoS is GA Secondary Scanner

Troubleshooting

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

RncFunction

RNC

pmNoIuSigEstablishAttemptCs

No

RncFunction

RNC

pmNoIuSigEstablishAttemptPs

No

RncFunction

RNC

pmNoIuSigEstablishSuccessCs

No

Reason

RncFunction

RNC

pmNoIuSigEstablishSuccessPs

No

RncFunction

RNC

pmNoOfPacketCallDuration1

Primary Scanner

Primary Scanner

RncFunction

RNC

pmNoOfPacketCallDuration2

Primary Scanner

Primary Scanner

RncFunction

RNC

pmNoOfPacketCallDuration3

Primary Scanner

Primary Scanner

RncFunction

RNC

pmNoOfPacketCallDuration4

Primary Scanner

Primary Scanner

RncFunction

RNC

pmNoOfPacketCallDurationHs1

Primary Scanner

Primary Scanner

RncFunction

RNC

pmNoOfPacketCallDurationHs2

Primary Scanner

Primary Scanner

RncFunction

RNC

pmNoOfPacketCallDurationHs3

Primary Scanner

Primary Scanner

RncFunction

RNC

pmNoOfPacketCallDurationHs4

Primary Scanner

Primary Scanner

RncFunction

RNC

pmNoOfRedirectedEmergencyCalls

Primary Scanner

Primary Scanner - Level 3 Scorecard

RncFunction

RNC

pmNoRabEstablishFailureUeCapability

Secondary Scanner

Secondary Scanner

RncFunction

RNC

pmNoReceivedSduDcch

No

RncFunction

RNC

pmNoReceivedSduDtch

No

RncFunction

RNC

pmNoRetransPduDcch

No

RncFunction

RNC

pmNoRetransPduDtch

No

RncFunction

RNC

pmNoSentPduDcch

No

RncFunction

RNC

pmNoSentPduDtch

No

RncFunction

RNC

pmPositioningReqAtt

No

RncFunction

RNC

pmPositioningReqSucc

No

RncFunction

RNC

pmSentPacketData1

Primary Scanner

RncFunction

RNC

pmSentPacketData2

Primary Scanner

RncFunction

RNC

pmSentPacketData3

Primary Scanner

RncFunction

RNC

pmSentPacketData4

Primary Scanner

RncFunction

RNC

pmSentPacketDataHs1

Primary Scanner

RncFunction

RNC

pmSentPacketDataHs2

Primary Scanner

RncFunction

RNC

pmSentPacketDataHs3

Primary Scanner

RncFunction

RNC

pmSentPacketDataHs4

Primary Scanner

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 125 of 170 © 2007 AT&T

Primary Scanner - Level 3 Scorecard and Dimensioning Primary Scanner - Level 3 Scorecard and Dimensioning Primary Scanner - Level 3 Scorecard and Dimensioning Primary Scanner - Level 3 Scorecard and Dimensioning Primary Scanner - Level 3 Scorecard and Dimensioning Primary Scanner - Level 3 Scorecard and Dimensioning Primary Scanner - Level 3 Scorecard and Dimensioning Primary Scanner - Level 3 Scorecard and Dimensioning

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

RncFunction

RNC

pmSentPacketDataInclRetrans1

Primary Scanner

Primary Scanner

RncFunction

RNC

pmSentPacketDataInclRetrans2

Primary Scanner

Primary Scanner

RncFunction

RNC

pmSentPacketDataInclRetrans3

Primary Scanner

Primary Scanner

RncFunction

RNC

pmSentPacketDataInclRetrans4

Primary Scanner

Primary Scanner

RncFunction

RNC

pmSentPacketDataInclRetransHs1

Primary Scanner

Primary Scanner

RncFunction

RNC

pmSentPacketDataInclRetransHs2

Primary Scanner

Primary Scanner

RncFunction

RNC

pmSentPacketDataInclRetransHs3

Primary Scanner

Primary Scanner

RncFunction

RNC

pmSentPacketDataInclRetransHs4

Primary Scanner

Primary Scanner

RncFunction

RNC

pmTotalPacketDuration1

Primary Scanner

Primary Scanner - Level 3 Scorecard

RncFunction

RNC

pmTotalPacketDuration2

Primary Scanner

Primary Scanner - Level 3 Scorecard

RncFunction

RNC

pmTotalPacketDuration3

Primary Scanner

Primary Scanner - Level 3 Scorecard

RncFunction

RNC

pmTotalPacketDuration4

Primary Scanner

Primary Scanner - Level 3 Scorecard

RncFunction

RNC

pmTotalPacketDurationHs1

Primary Scanner

Primary Scanner - Level 3 Scorecard

RncFunction

RNC

pmTotalPacketDurationHs2

Primary Scanner

Primary Scanner - Level 3 Scorecard

RncFunction

RNC

pmTotalPacketDurationHs3

Primary Scanner

Primary Scanner - Level 3 Scorecard

RncFunction

RNC

pmTotalPacketDurationHs4

Primary Scanner

Primary Scanner - Level 3 Scorecard

RoutingArea

RNC

pmCnInitPagingToIdleUeRa

No

SccpAccountingCriteria

Transport

pmNoOfMsg

No

SccpAccountingCriteria

Transport

pmNoOfOctets

No

Sccpch

Site

pmNoOfTfc1OnFach1

No

Add when FACH is GA

Sccpch

Site

pmNoOfTfc2OnFach1

No

Add when FACH is GA

Sccpch

Site

pmNoOfTfc3OnFach2

No

Add when FACH is GA

SccpPolicing

Transport

pmNoOfRejectMsg

No

SccpScrc

Transport

pmNoOfConnectFailure

No

SccpScrc

Transport

pmNoOfHopCounterViolation

No No

SccpScrc

Transport

pmNoOfRoutingFailNetworkCongest

SccpScrc

Transport

pmNoOfRoutingFailNoTransAddrOfSuchNature

No

SccpScrc

Transport

pmNoOfRoutingFailNoTransSpecificAddr

No

SccpScrc

Transport

pmNoOfRoutingFailReasonUnknown

No

SccpScrc

Transport

pmNoOfRoutingFailSubsysUnavail

No

SccpScrc

Transport

pmNoOfRoutingFailUnequippedSubsys

No

SccpScrc

Transport

pmNoOfRoutingFailure

No

SccpScrc

Transport

pmNoOfRoutingFailurePointCodeUnAvail

No

SccpSp

Transport

pmNoOfConInUseExceedHighWaterMark

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 126 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

SccpSp

Transport

pmNoOfConInUseReceededLowWaterMark

No

SccpSp

Transport

pmNoOfCREFRecFromNL

No

SccpSp

Transport

pmNoOfCREFSentToNL

No

SccpSp

Transport

pmNoOfCRRec

No

SccpSp

Transport

pmNoOfCRSent

No

SccpSp

Transport

pmNoOfDT1Rec

No

SccpSp

Transport

pmNoOfDT1Sent

No

SccpSp

Transport

pmNoOfERRRec

No

SccpSp

Transport

pmNoOfERRSent

No

SccpSp

Transport

pmNoOfLUDTRec

No

SccpSp

Transport

pmNoOfLUDTSSent

No

SccpSp

Transport

pmNoOfRLSDRecFromNL

No

SccpSp

Transport

pmNoOfRLSDSentToNL

No

SccpSp

Transport

pmNoOfSubsysAllowedSent

No

SccpSp

Transport

pmNoOfUDTRec

No

SccpSp

Transport

pmNoOfUDTSent

No

SccpSp

Transport

pmNoOfUDTSRec

No

SccpSp

Transport

pmNoOfUDTSSent

No

SccpSp

Transport

pmNoOfXUDTRec

No

SccpSp

Transport

pmNoOfXUDTSent

No

SccpSp

Transport

pmNoOfXUDTSRec

No

SccpSp

Transport

pmNoOfXUDTSSent

No

Sctp

Transport

pmSctpAborted

No No

Sctp

Transport

pmSctpActiveEstab

Sctp

Transport

pmSctpCurrEstab

No

Sctp

Transport

pmSctpPassiveEstab

No

Sctp

Transport

pmSctpShutdowns

No

Sctp

Transport

pmSctpStatAssocOutOfBlue

No

Sctp

Transport

pmSctpStatChecksumErrorCounter

No

Sctp

Transport

pmSctpStatCommResume

No

Sctp

Transport

pmSctpStatCommStop

No

Sctp

Transport

pmSctpStatFragmentedUserMsg

No

Sctp

Transport

pmSctpStatOutOfOrderRecChunks

No

Sctp

Transport

pmSctpStatOutOfOrderSendChunks

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 127 of 170 © 2007 AT&T

Reason

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Sctp

Transport

pmSctpStatReassembledUserMsg

No

Sctp

Transport

pmSctpStatRecChunks

No

Sctp

Transport

pmSctpStatRecChunksDropped

No

Sctp

Transport

pmSctpStatReceivedControlChunks

No

Sctp

Transport

pmSctpStatReceivedPackages

No

Sctp

Transport

pmSctpStatRetransChunks

No

Sctp

Transport

pmSctpStatSentChunks

No

Sctp

Transport

pmSctpStatSentChunksDropped

No

Sctp

Transport

pmSctpStatSentControlChunks

No

Sctp

Transport

pmSctpStatSentPackages

No

SecurityHandling

RNC

pmIntegrityFailureRrcMsg

National_RNC_P5MD

Sts1SpeTtp

Transport

pmEsp

No

Sts1SpeTtp

Transport

pmSesp

No

Sts1SpeTtp

Transport

pmUasp

No

Sts3CspeTtp

Transport

pmEsp

No

Reason

Troubleshooting

Sts3CspeTtp

Transport

pmSesp

No

Sts3CspeTtp

Transport

pmUasp

No

T1PhysPathTerm

Transport - Site

pmEs

National_Site_P5MD

Troubleshooting

T1PhysPathTerm

Transport - Site

pmSes

National_Site_P5MD

Troubleshooting

T1PhysPathTerm

Transport - Site

pmUas

National_Site_P5MD

Troubleshooting

T1Ttp

Transport - RXI

pmEs

National_RXI_P5MD

Troubleshooting

T1Ttp

Transport - RXI

pmSes

National_RXI_P5MD

Troubleshooting

T1Ttp

Transport - RXI

pmUas

National_RXI_P5MD

Troubleshooting

T3PhysPathTerm

Transport - Site

pmEsCpp

National_Site_P5MD

Troubleshooting

T3PhysPathTerm

Transport - Site

pmSesCpp

National_Site_P5MD

Troubleshooting

T3PhysPathTerm

Transport - RBS

pmUas

No

UePositioning

RNC

pmPositioningReqAttCellId

No

UePositioning

RNC

pmPositioningReqAttEsCellId

No

UePositioning

RNC

pmPositioningReqReAttCellId

No

UePositioning

RNC

pmPositioningReqReAttEsCellId

No

UePositioning

RNC

pmPositioningReqReAttSuccCellId

No

UePositioning

RNC

pmPositioningReqSuccCellId

No

UePositioning

RNC

pmPositioningReqSuccCellIdQosSucc

No

UeRc

RNC

pmDlDchTrafficVolumeBeforeSplit

National_RNC_P5MD

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 128 of 170 © 2007 AT&T

Dimensioning

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

UeRc

RNC

pmDlFachTrafficVolume

National_RNC_P5MD

Dimensioning

UeRc

RNC

pmFaultyTransportBlocksAcUl

Primary Scanner

Primary Scanner

UeRc

RNC

pmNoRabEstablishAttempts

National_RNC_P5MD

Troubleshooting Troubleshooting

UeRc

RNC

pmNoRabEstablishSuccess

National_RNC_P5MD

UeRc

RNC

pmNoRabReleaseAttempts

National_RNC_P5MD

Troubleshooting

UeRc

RNC

pmNoRabReleaseSuccess

National_RNC_P5MD

Troubleshooting

UeRc

RNC

pmSamplesRabEstablish

National_RNC_P5MD

Troubleshooting

UeRc

RNC

pmSumRabEstablish

National_RNC_P5MD

Troubleshooting

UeRc

RNC

pmTransportBlocksAcUl

Primary Scanner

Primary Scanner

UeRc

RNC

pmUlDchTrafficVolumeAfterComb

National_RNC_P5MD

Dimensioning Dimensioning

UeRc

RNC

pmUlRachTrafficVolume

National_RNC_P5MD

UniSaalTp

Transport - RNC

pmLinkInServiceTime

No

UniSaalTp

Transport - RNC

pmNoOfAllSLFailures

No

UniSaalTp

Transport - RNC

pmNoOfLocalCongestions

National_RNC_P5MD

UniSaalTp

Transport - RNC

pmNoOfNoResponses

No

UniSaalTp

Transport - RNC

pmNoOfOtherErrors

No

UniSaalTp

Transport - RNC

pmNoOfProtocolErrors

No

UniSaalTp

Transport - RNC

pmNoOfReceivedSDUs

No

UniSaalTp

Transport - RNC

pmNoOfRemoteCongestions

No

UniSaalTp

Transport - RNC

pmNoOfSentSDUs

No

UniSaalTp

Transport - RNC

pmNoOfSequenceDataLosses

No

UniSaalTp

Transport - RNC

pmNoOfUnsuccReTransmissions

No

UplinkBaseBandPool

Site

pmApomcOfRakeRecUsed

No

Troubleshooting

UplinkBaseBandPool

Site

pmApomcOfUlLinkCap

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmHwCePoolEul

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmNoOfIbho

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmNoOfRadioLinksSf128

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmNoOfRadioLinksSf16

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmNoOfRadioLinksSf256

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmNoOfRadioLinksSf32

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmNoOfRadioLinksSf4

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmNoOfRadioLinksSf64

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmNoOfRadioLinksSf8

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmNoUlHwLimitEul

National_Site_P5MD

Dimensioning

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 129 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

UplinkBaseBandPool

Site

pmSetupAttemptsSf128

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupAttemptsSf16

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupAttemptsSf256

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupAttemptsSf32

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupAttemptsSf4

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupAttemptsSf64

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupAttemptsSf8

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupFailuresSf128

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupFailuresSf16

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupFailuresSf256

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupFailuresSf32

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupFailuresSf4

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupFailuresSf64

National_Site_P5MD

Dimensioning

UplinkBaseBandPool

Site

pmSetupFailuresSf8

National_Site_P5MD

Dimensioning

Ura

RNC

pmCnInitPagingToUraUe

No

Add when URA is GA

Ura

RNC

pmSamplesRabUra

No

Add when URA is GA

Ura

RNC

pmSumRabUra

No

Add when URA is GA

Ura

RNC

pmUtranInitPagingToUraUe

No

Add when URA is GA

UtranCell

Cell

pmCellDowntimeAuto

Primary Scanner

Primary Scanner Primary Scanner

UtranCell

Cell

pmCellDowntimeMan

Primary Scanner

UtranCell

Cell

pmChSwitchAttemptFachUra

No

Add when URA is GA

UtranCell

Cell

pmChSwitchAttemptUraFach

No

Add when URA is GA

UtranCell

Cell

pmChSwitchDch128Fach

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmChSwitchDch384Fach

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmChSwitchDch64Fach

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmChSwitchFachDch

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmChSwitchFachIdle

Primary Scanner

Primary Scanner

UtranCell

Cell

pmChSwitchP128P384

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmChSwitchP128P64

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmChSwitchP384P128

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmChSwitchP64P128

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmChSwitchSp0Sp64

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmChSwitchSp64Sp0

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmChSwitchSuccFachUra

No

Add when URA is GA

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 130 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

UtranCell

Cell

pmChSwitchSuccUraFach

No

Add when URA is GA

UtranCell

Cell

pmCmAttDlHls

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmCmAttDlSf2

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmCmAttUlHls

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmCmAttUlSf2

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmCmStop

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmCmSuccDlHls

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmCmSuccDlSf2

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmCmSuccUlHls

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmCmSuccUlSf2

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmDlRlcUserPacketThp

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmDlTrafficVolumeAmr4750

No

Add when Multirate AMR is GA

UtranCell

Cell

pmDlTrafficVolumeAmr5900

No

Add when Multirate AMR is GA

UtranCell

Cell

pmDlTrafficVolumeAmr7950

No

Add when Multirate AMR is GA

UtranCell

Cell

pmDlTrafficVolumeCs12

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmDlTrafficVolumeCs57

No

UtranCell

Cell

pmDlTrafficVolumeCs64

No

UtranCell

Cell

pmDlTrafficVolumePs128

National_RNC_P5MD

UtranCell

Cell

pmDlTrafficVolumePs384

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmDlTrafficVolumePs64

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmDlTrafficVolumePs8

No

Add when Streaming QoS is GA

UtranCell

Cell

pmDlTrafficVolumePsCommon

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmDlTrafficVolumePsStr128

No

Add when Streaming QoS is GA

UtranCell

Cell

pmDlTrafficVolumePsStr16

No

Add when Streaming QoS is GA

UtranCell

Cell

pmDlTrafficVolumePsStr64

No

Add when Streaming QoS is GA

UtranCell

Cell

pmDlUpswitchAttemptHigh

National_RNC_P5MD

Troubleshooting Secondary Scanner

Dimensioning

UtranCell

Cell

pmDlUpswitchAttemptHs

Secondary Scanner

UtranCell

Cell

pmDlUpswitchAttemptLow

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmDlUpswitchAttemptMedium

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmDlUpswitchSuccessHigh

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmDlUpswitchSuccessHs

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmDlUpswitchSuccessLow

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmDlUpswitchSuccessMedium

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmDownSwitchAttempt

Secondary Scanner

Secondary Scanner

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 131 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

UtranCell

Cell

pmDownSwitchSuccess

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmEnableEulHhoAttempt

No

UtranCell

Cell

pmEnableEulHhoSuccess

No

UtranCell

Cell

pmEnableHsHhoAttempt

No

UtranCell

Cell

pmEnableHsHhoSuccess

No

UtranCell

Cell

pmEnableHsHhoSuccess

No

UtranCell

Cell

pmEulHarqTransmTti10Failure

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmEulHarqTransmTti10PsInteractive

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmEulHarqTransmTti10Srb

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmEulMacesPduTti10DelivPsInteractive

No

UtranCell

Cell

pmEulMacesPduTti10DelivSrb

No

UtranCell

Cell

pmEulMacesPduTti10UndelivPsInteractive

No

UtranCell

Cell

pmEulMacesPduTti10UndelivSrb

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmEulToDchAttempt

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmEulToDchSuccess

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmFailedChSwitch

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmFailedDchChSwitch

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmFaultyTransportBlocksBcUl

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmHsToDchAttempt

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmHsToDchSuccess

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmInactivityMultiPsInt

No

UtranCell

Cell

pmInactivityPsStreamIdle

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmInterFreqMeasCmStart

National_RNC_P5MD

Troubleshooting - IF

UtranCell

Cell

pmInterFreqMeasCmStop

National_RNC_P5MD

Troubleshooting - IF

UtranCell

Cell

pmInterFreqMeasNoCmStart

National_RNC_P5MD

Troubleshooting - IF

UtranCell

Cell

pmInterFreqMeasNoCmStop

National_RNC_P5MD

Troubleshooting - IF

UtranCell

Cell

pmIratHoGsmMeasCmStart

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmIratHoGsmMeasNoCmStart

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmNoCellDchDisconnectAbnorm

Secondary Scanner

Secondary Scanner - Level 3 Scorecard

UtranCell

Cell

pmNoCellDchDisconnectNormal

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoCellFachDisconnectAbnorm

Secondary Scanner

Secondary Scanner Secondary Scanner

UtranCell

Cell

pmNoCellFachDisconnectNormal

Secondary Scanner

UtranCell

Cell

pmNoCellUpdAttempt

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoCellUpdSuccess

Secondary Scanner

Secondary Scanner

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 132 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

UtranCell

Cell

pmNoCs64DchDiscAbnorm

Secondary Scanner

Secondary Scanner - Level 3 Scorecard

UtranCell

Cell

pmNoCs64DchDiscNormal

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoCsStreamDchDiscAbnorm

Primary Scanner

Primary Scanner - Level 3 Scorecard

UtranCell

Cell

pmNoCsStreamDchDiscNormal

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoDirRetryAtt

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoDirRetrySuccess

Secondary Scanner

Secondary Scanner - Level 3 Scorecard

UtranCell

Cell

pmNoDlChCodeAllocAltCodeCm

National_RNC_P5MD

Dimensioning Dimensioning

UtranCell

Cell

pmNoDlChCodeAllocAttemptCm

National_RNC_P5MD

UtranCell

Cell

pmNoEulCcAttempt

No

Reason

UtranCell

Cell

pmNoEulCcSuccess

No

UtranCell

Cell

pmNoEulHardHoReturnOldChSource

No

UtranCell

Cell

pmNoEulHardHoReturnOldChTarget

No

UtranCell

Cell

pmNoFailedAfterAdm

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoFailedRabEstAttemptExceedConnLimit

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoFailedRabEstAttemptLackDlAse

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoFailedRabEstAttemptLackDlChnlCode

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoFailedRabEstAttemptLackDlHw

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoFailedRabEstAttemptLackDlHwBest

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoFailedRabEstAttemptLackDlPwr

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoFailedRabEstAttemptLackUlAse

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoFailedRabEstAttemptLackUlHw

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoFailedRabEstAttemptLackUlHwBest

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoHsCcAttempt

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoHsCcSuccess

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoHsHardHoReturnOldChSource

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoHsHardHoReturnOldChTarget

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoIncomingEulHardHoAttempt

No No

UtranCell

Cell

pmNoIncomingEulHardHoSuccess

UtranCell

Cell

pmNoIncomingHsHardHoAttempt

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoIncomingHsHardHoSuccess

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoInCsIratHoAdmFail

No

Add when 2G to 3G HO is GA

UtranCell

Cell

pmNoInCsIratHoAtt

No

Add when 2G to 3G HO is GA

UtranCell

Cell

pmNoInCsIratHoSuccess

No

Add when 2G to 3G HO is GA

UtranCell

Cell

pmNoLoadSharingRrcConn

Primary Scanner

Primary Scanner

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 133 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

UtranCell

Cell

pmNoLoadSharingRrcConnCs

No

Reason

UtranCell

Cell

pmNoLoadSharingRrcConnPs

No

UtranCell

Cell

pmNoNonServingCellReqDeniedEul

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoNormalRabReleaseAmrNb

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmNoNormalRabReleaseCs64

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoNormalRabReleaseCsStream

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoNormalRabReleasePacket

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoNormalRabReleasePacketStream

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoNormalRabReleasePacketStream128

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoNormalRabReleasePacketUra

No

Add when URA is GA

UtranCell

Cell

pmNoNormalRabReleaseSpeech

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoNormalRbReleaseEul

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmNoNormalRbReleaseHs

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoOfIurSwDownNgCong

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoOfIurTermCsCong

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoOfIurTermHsCong

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoOfIurTermSpeechCong

National_RNC_P5MD

Dimensioning Primary Scanner

UtranCell

Cell

pmNoOfNonHoReqDeniedCs

Primary Scanner

UtranCell

Cell

pmNoOfNonHoReqDeniedEul

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoOfNonHoReqDeniedHs

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoOfNonHoReqDeniedInteractive

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoOfNonHoReqDeniedPsStr128

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoOfNonHoReqDeniedPsStreaming

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoOfNonHoReqDeniedSpeech

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoOfReturningEmergencyCalls

Secondary Scanner

Secondary Scanner Secondary Scanner

UtranCell

Cell

pmNoOfReturningRrcConn

Secondary Scanner

UtranCell

Cell

pmNoOfRlForDriftingUes

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoOfRlForNonDriftingUes

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoOfSampAseDl

Secondary Scanner

Secondary Scanner - Dimensioning

UtranCell

Cell

pmNoOfSampAseUl

Secondary Scanner

Secondary Scanner - Dimensioning

UtranCell

Cell

pmNoOfSwDownEulCong

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoOfSwDownHsCong

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoOfSwDownNgAdm

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoOfSwDownNgCong

National_RNC_P5MD

Dimensioning

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 134 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

UtranCell

Cell

pmNoOfSwDownNgHo

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmNoOfTermCsCong

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoOfTermSpeechCong

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoOutgoingEulHardHoAttempt

National_RNC_P5MD

Troubleshooting Troubleshooting

UtranCell

Cell

pmNoOutgoingEulHardHoSuccess

National_RNC_P5MD

UtranCell

Cell

pmNoOutgoingHsHardHoAttempt

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoOutgoingHsHardHoSuccess

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoPacketDchDiscAbnorm

Secondary Scanner

Secondary Scanner - Level 3 Scorecard

UtranCell

Cell

pmNoPacketDchDiscNormal

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoPagingAttemptCnInitDcch

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmNoPagingAttemptUtranRejected

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmNoPagingType1Attempt

No

UtranCell

Cell

pmNoPagingType1AttemptCs

No

UtranCell

Cell

pmNoPagingType1AttemptPs

No

UtranCell

Cell

pmNoPsStream128Ps8DchDiscAbnorm

No

Add when Streaming QoS is GA

UtranCell

Cell

pmNoPsStream128Ps8DchDiscNormal

No

Add when Streaming QoS is GA

UtranCell

Cell

pmNoPsStream64Ps8DchDiscAbnorm

Primary Scanner

Primary Scanner - Level 3 Scorecard

UtranCell

Cell

pmNoPsStream64Ps8DchDiscNormal

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoRabEstablishAttemptAmrNb

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmNoRabEstablishAttemptCs57

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmNoRabEstablishAttemptCs64

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmNoRabEstablishAttemptPacketInteractive

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmNoRabEstablishAttemptPacketInteractiveEul

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmNoRabEstablishAttemptPacketInteractiveHs

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmNoRabEstablishAttemptPacketStream

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmNoRabEstablishAttemptPacketStream128

Primary Scanner

UtranCell

Cell

pmNoRabEstablishAttemptSpeech

Primary Scanner

UtranCell

Cell

pmNoRabEstablishSuccessAmrNb

National_RNC_P5MD

Primary Scanner - Level 1 and 3 Scorecard Primary Scanner - Level 1 and 3 Scorecard and Dimensioning Troubleshooting

UtranCell

Cell

pmNoRabEstablishSuccessCs57

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmNoRabEstablishSuccessCs64

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmNoRabEstablishSuccessPacketInteractive

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmNoRabEstablishSuccessPacketInteractiveEul

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmNoRabEstablishSuccessPacketInteractiveHs

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmNoRabEstablishSuccessPacketStream

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 135 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

UtranCell

Cell

pmNoRabEstablishSuccessPacketStream128

Primary Scanner

UtranCell

Cell

pmNoRabEstablishSuccessSpeech

Primary Scanner

UtranCell

Cell

pmNoRejRrcConnMpLoadC

Secondary Scanner

Primary Scanner - Level 1 and 3 Scorecard Primary Scanner - Level 1 and 3 Scorecard and Dimensioning Secondary Scanner

UtranCell

Cell

pmNoReqDeniedAdm

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoRlDeniedAdm

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoRrcCsReqDeniedAdm

Primary Scanner

Dimensioning

UtranCell

Cell

pmNoRrcPsReqDeniedAdm

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoRrcReqDeniedAdm

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoServingCellReqDeniedEul

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoSpeechDchDiscAbnorm

Secondary Scanner

Secondary Scanner - Level 3 Scorecard

UtranCell

Cell

pmNoSpeechDchDiscNormal

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoSysRelSpeechNeighbr

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoSysRelSpeechSoHo

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoSysRelSpeechUlSynch

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoSystemRabReleaseAmrNb

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmNoSystemRabReleaseCs64

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoSystemRabReleaseCsStream

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoSystemRabReleasePacket

Primary Scanner

Primary Scanner - Level 3 Scorecard

UtranCell

Cell

pmNoSystemRabReleasePacketStream

Primary Scanner

Primary Scanner - Level 3 Scorecard

UtranCell

Cell

pmNoSystemRabReleasePacketStream128

Primary Scanner

Primary Scanner - Level 3 Scorecard

UtranCell

Cell

pmNoSystemRabReleasePacketUra

No

Add when URA is GA

UtranCell

Cell

pmNoSystemRabReleaseSpeech

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmNoSystemRbReleaseEul

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmNoSystemRbReleaseHs

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoTimesCellFailAddToActSet

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoTimesIfhoCellFailAddToActSet

National_RNC_P5MD

Troubleshooting - IF Troubleshooting - IF

UtranCell

Cell

pmNoTimesIfhoRlAddToActSet

National_RNC_P5MD

UtranCell

Cell

pmNoTimesRlAddToActSet

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoTimesRlDelFrActSet

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoTimesRlRepInActSet

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmNoTpSwitchSp64Speech

Primary Scanner

Primary Scanner

UtranCell

Cell

pmNoUraUpdAttempt

No

Add when URA is GA

UtranCell

Cell

pmNoUraUpdSuccess

No

Add when URA is GA

UtranCell

Cell

pmRabEstablishEcAttempt

National_RNC_P5MD

Troubleshooting

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 136 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

UtranCell

Cell

pmRabEstablishEcSuccess

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmRes1

Activated by RES Recording

Level 3 Scorecard

UtranCell

Cell

pmRes2

Activated by RES Recording

Level 3 Scorecard

UtranCell

Cell

pmRes3

Activated by RES Recording

Level 3 Scorecard

UtranCell

Cell

pmRes4

Activated by RES Recording

Level 3 Scorecard

UtranCell

Cell

pmRes5

Activated by RES Recording

Level 3 Scorecard

UtranCell

Cell

pmRes6

Activated by RES Recording

Level 3 Scorecard

UtranCell

Cell

pmRlAddAttemptsBestCellCsConvers

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmRlAddAttemptsBestCellPacketHigh

National_RNC_P5MD

Troubleshooting Troubleshooting

UtranCell

Cell

pmRlAddAttemptsBestCellPacketLow

National_RNC_P5MD

UtranCell

Cell

pmRlAddAttemptsBestCellSpeech

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmRlAddAttemptsBestCellStandAlone

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmRlAddAttemptsBestCellStream

No

Add when Streaming QoS is GA

UtranCell

Cell

pmRlAddSuccessBestCellCsConvers

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmRlAddSuccessBestCellPacketHigh

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmRlAddSuccessBestCellPacketLow

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmRlAddSuccessBestCellSpeech

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmRlAddSuccessBestCellStandAlone

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmRlAddSuccessBestCellStream

No

Add when Streaming QoS is GA Primary Scanner

UtranCell

Cell

pmSamplesActDlRlcTotPacketThp

Primary Scanner

UtranCell

Cell

pmSamplesActDlRlcUserPacketThp

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSamplesActUlRlcTotPacketThp

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSamplesActUlRlcUserPacketThp

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSamplesAmr12200RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSamplesAmr4750RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSamplesAmr5900RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSamplesAmr7950RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSamplesBestAmr12200RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSamplesBestAmr4750RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSamplesBestAmr5900RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSamplesBestAmr7950RabEstablish

No

UtranCell

Cell

pmSamplesBestCs12Establish

Primary Scanner

UtranCell

Cell

pmSamplesBestCs12PsIntRabEstablish

Secondary Scanner

Add when Multirate AMR is GA Primary Scanner - Level 3 Scorecard and Dimensioning Secondary Scanner

UtranCell

Cell

pmSamplesBestCs57RabEstablish

Primary Scanner

Primary Scanner

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 137 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

UtranCell

Cell

pmSamplesBestCs64PsIntRabEstablish

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmSamplesBestCs64RabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSamplesBestDchPsIntRabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSamplesBestPsEulRabEstablish

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmSamplesBestPsHsAdchRabEstablish

Primary Scanner

Dimensioning

UtranCell

Cell

pmSamplesBestPsStr128Ps8RabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSamplesBestPsStr64Ps8RabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSamplesCompMode

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesCs12Ps0RabEstablish

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesCs12Ps64RabEstablish

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesCs12RabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSamplesCs57RabEstablish

No

UtranCell

Cell

pmSamplesCs64Ps8RabEstablish

Secondary Scanner

UtranCell

Cell

pmSamplesCs64RabEstablish

No

UtranCell

Cell

pmSamplesFachPsIntRabEstablish

Primary Scanner

Primary Scanner Troubleshooting

Secondary Scanner

UtranCell

Cell

pmSamplesPsEulRabEstablish

National_RNC_P5MD

UtranCell

Cell

pmSamplesPsHsAdchRabEstablish

Secondary Scanner

Secondary Scanner - Dimensioning

UtranCell

Cell

pmSamplesPsInteractive

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSamplesPsStr128Ps8RabEstablish

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmSamplesPsStr64Ps8RabEstablish

No

UtranCell

Cell

pmSamplesRabFach

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesRrcOnlyEstablish

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmSamplesUesWith1Rls1RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesUesWith1Rls2RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesUesWith1Rls3RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesUesWith2Rls2RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesUesWith2Rls3RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesUesWith2Rls4RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesUesWith3Rls3RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesUesWith3Rls4RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSamplesUesWith4Rls4RlInActSet

National_RNC_P5MD

Dimensioning Troubleshooting

UtranCell

Cell

pmSamplesUlRssi

National_RNC_P5MD

UtranCell

Cell

pmSumActDlRlcTotPacketThp

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumActDlRlcUserPacketThp

Primary Scanner

Primary Scanner

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 138 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

UtranCell

Cell

pmSumActUlRlcTotPacketThp

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumActUlRlcUserPacketThp

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumAmr12200RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSumAmr4750RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSumAmr5900RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSumAmr7950RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSumBestAmr12200RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSumBestAmr4750RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSumBestAmr5900RabEstablish

No

Add when Multirate AMR is GA

UtranCell

Cell

pmSumBestAmr7950RabEstablish

No

UtranCell

Cell

pmSumBestCs12Establish

Primary Scanner Secondary Scanner

Add when Multirate AMR is GA Primary Scanner - Level 3 Scorecard and Dimensioning Secondary Scanner

UtranCell

Cell

pmSumBestCs12PsIntRabEstablish

UtranCell

Cell

pmSumBestCs57RabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumBestCs64PsIntRabEstablish

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmSumBestCs64RabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumBestDchPsIntRabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumBestPsEulRabEstablish

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmSumBestPsHsAdchRabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumBestPsStr128Ps8RabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumBestPsStr64Ps8RabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumCompMode

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumCs12Ps0RabEstablish

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumCs12Ps64RabEstablish

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumCs12RabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumCs57RabEstablish

No

UtranCell

Cell

pmSumCs64Ps8RabEstablish

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmSumCs64RabEstablish

No

UtranCell

Cell

pmSumFachPsIntRabEstablish

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumOfSampAseDl

Secondary Scanner

Secondary Scanner - Dimensioning

UtranCell

Cell

pmSumOfSampAseUl

Secondary Scanner

Secondary Scanner - Dimensioning

UtranCell

Cell

pmSumOfTimesMeasOlDl

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmSumOfTimesMeasOlUl

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmSumPsEulRabEstablish

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmSumPsHsAdchRabEstablish

Secondary Scanner

Secondary Scanner - Dimensioning

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 139 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

UtranCell

Cell

pmSumPsInteractive

Primary Scanner

Primary Scanner

UtranCell

Cell

pmSumPsStr128Ps8RabEstablish

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmSumPsStr64Ps8RabEstablish

No

UtranCell

Cell

pmSumRabFach

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumRrcOnlyEstablish

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmSumUesWith1Rls1RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumUesWith1Rls2RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumUesWith1Rls3RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumUesWith2Rls2RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumUesWith2Rls3RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumUesWith2Rls4RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumUesWith3Rls3RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumUesWith3Rls4RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumUesWith4Rls4RlInActSet

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmSumUlRssi

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmTotalTimeDlCellCong

Primary Scanner

Primary Scanner

UtranCell

Cell

pmTotalTimeUlCellCong

Primary Scanner

Primary Scanner

UtranCell

Cell

pmTotNoRrcConnectAttIratCcOrder

National_RNC_P5MD

Troubleshooting Troubleshooting

UtranCell

Cell

pmTotNoRrcConnectAttIratCellResel

National_RNC_P5MD

UtranCell

Cell

pmTotNoRrcConnectFailCongIratCcOrder

No

UtranCell

Cell

pmTotNoRrcConnectFailCongIratCellResel

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmTotNoRrcConnectReq

Primary Scanner

Primary Scanner - Dimensioning

UtranCell

Cell

pmTotNoRrcConnectReqCs

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmTotNoRrcConnectReqCsSucc

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmTotNoRrcConnectReqPs

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmTotNoRrcConnectReqPsSucc

Primary Scanner

Primary Scanner - Level 1 and 3 Scorecard

UtranCell

Cell

pmTotNoRrcConnectReqSms

National_RNC_P5MD

UtranCell

Cell

pmTotNoRrcConnectReqSuccess

Primary Scanner

UtranCell

Cell

pmTotNoRrcConnectSuccessIratCcOrder

National_RNC_P5MD

Dimensioning Primary Scanner - Level 3 Scorecard and Dimensioning Troubleshooting

UtranCell

Cell

pmTotNoRrcConnectSuccessIratCellResel

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmTotNoTermRrcConnectReq

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmTotNoTermRrcConnectReqCs

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmTotNoTermRrcConnectReqCsSucc

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmTotNoTermRrcConnectReqPs

National_RNC_P5MD

Troubleshooting

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 140 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Reason

UtranCell

Cell

pmTotNoTermRrcConnectReqPsSucc

National_RNC_P5MD

Troubleshooting Troubleshooting

UtranCell

Cell

pmTotNoTermRrcConnectReqSucc

National_RNC_P5MD

UtranCell

Cell

pmTotNoUtranRejRrcConnReq

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmTransportBlocksBcUl

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmUlRlcUserPacketThp

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmUlTrafficVolumeAmr4750

No

Add when Multirate AMR is GA

UtranCell

Cell

pmUlTrafficVolumeAmr5900

No

Add when Multirate AMR is GA

UtranCell

Cell

pmUlTrafficVolumeAmr7950

No

Add when Multirate AMR is GA

UtranCell

Cell

pmUlTrafficVolumeCs12

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmUlTrafficVolumeCs57

No

UtranCell

Cell

pmUlTrafficVolumeCs64

No

UtranCell

Cell

pmUlTrafficVolumePs128

National_RNC_P5MD

UtranCell

Cell

pmUlTrafficVolumePs384

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmUlTrafficVolumePs64

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmUlTrafficVolumePs8

No

Dimensioning

UtranCell

Cell

pmUlTrafficVolumePsCommon

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmUlTrafficVolumePsStr128

No

Add when Streaming QoS is GA

UtranCell

Cell

pmUlTrafficVolumePsStr16

No

Add when Streaming QoS is GA

UtranCell

Cell

pmUlUpswitchAttemptEul

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmUlUpswitchAttemptHigh

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmUlUpswitchAttemptLow

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmUlUpswitchAttemptMedium

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmUlUpswitchSuccessEul

National_RNC_P5MD

Troubleshooting

UtranCell

Cell

pmUlUpswitchSuccessHigh

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmUlUpswitchSuccessLow

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmUlUpswitchSuccessMedium

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmUpswitchFachHsAttempt

Secondary Scanner

Secondary Scanner

UtranCell

Cell

pmUpswitchFachHsSuccess

Secondary Scanner

Secondary Scanner

UtranRelation

Inter-Freq

pmAttNonBlindInterFreqHoCsConversational

No

UtranRelation

Inter-Freq

pmAttNonBlindInterFreqHoCsSpeech12

No

UtranRelation

Inter-Freq

pmAttNonBlindInterFreqHoPsInteractiveGreater64

No No

UtranRelation

Inter-Freq

pmAttNonBlindInterFreqHoPsInteractiveLess64

UtranRelation

Inter-Freq

pmAttNonBlindInterFreqHoStreamingOther

No

UtranRelation

Inter-Freq

pmFailNonBlindInterFreqHoFailRevertCsConversational

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 141 of 170 © 2007 AT&T

Add when Streaming QoS is GA

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

UtranRelation

Inter-Freq

pmFailNonBlindInterFreqHoFailRevertCsSpeech12

No

UtranRelation

Inter-Freq

pmFailNonBlindInterFreqHoFailRevertPsInteractiveGreater64

No

UtranRelation

Inter-Freq

pmFailNonBlindInterFreqHoFailRevertPsInteractiveLess64

No

UtranRelation

Inter-Freq

pmFailNonBlindInterFreqHoFailRevertStreamingOther

No

UtranRelation

Inter-Freq

pmFailNonBlindInterFreqHoRevertCsConversational

No

Reason

Add when Streaming QoS is GA

UtranRelation

Inter-Freq

pmFailNonBlindInterFreqHoRevertCsSpeech12

No

UtranRelation

Inter-Freq

pmFailNonBlindInterFreqHoRevertPsInteractiveGreater64

No

UtranRelation

Inter-Freq

pmFailNonBlindInterFreqHoRevertPsInteractiveLess64

No

UtranRelation

Inter-Freq

pmFailNonBlindInterFreqHoRevertStreamingOther

No

Add when Streaming QoS is GA

UtranRelation

CNHHO

pmNoAttOutCnhhoCsNonSpeech

No

Add when CNHHO is GA Add when CNHHO is GA

UtranRelation

CNHHO

pmNoAttOutCnhhoPsConnRelease

No

UtranRelation

CNHHO

pmNoAttOutCnhhoSpeech

No

Add when CNHHO is GA

UtranRelation

CNHHO

pmNoSuccOutCnhhoCsNonSpeech

No

Add when CNHHO is GA

UtranRelation

CNHHO

pmNoSuccOutCnhhoSpeech

No

Add when CNHHO is GA

UtranRelation

Intra-Freq

pmRlAddAttemptsBestCellCsConvers

National_URel_P5MD

Troubleshooting

UtranRelation

Intra-Freq

pmRlAddAttemptsBestCellPacketHigh

National_URel_P5MD

Troubleshooting

UtranRelation

Intra-Freq

pmRlAddAttemptsBestCellPacketLow

National_URel_P5MD

Troubleshooting

UtranRelation

Intra-Freq

pmRlAddAttemptsBestCellSpeech

National_URel_P5MD

Troubleshooting

UtranRelation

Intra-Freq

pmRlAddAttemptsBestCellStandAlone

National_URel_P5MD

Troubleshooting

UtranRelation

Intra-Freq

pmRlAddAttemptsBestCellStream

No

Add when Streaming QoS is GA

UtranRelation

Intra-Freq

pmRlAddSuccessBestCellCsConvers

National_URel_P5MD

Troubleshooting

UtranRelation

Intra-Freq

pmRlAddSuccessBestCellPacketHigh

National_URel_P5MD

Troubleshooting

UtranRelation

Intra-Freq

pmRlAddSuccessBestCellPacketLow

National_URel_P5MD

Troubleshooting

UtranRelation

Intra-Freq

pmRlAddSuccessBestCellSpeech

National_URel_P5MD

Troubleshooting

UtranRelation

Intra-Freq

pmRlAddSuccessBestCellStandAlone

National_URel_P5MD

Troubleshooting

UtranRelation

Intra-Freq

pmRlAddSuccessBestCellStream

No

Add when Streaming QoS is GA

UtranRelation

Inter-Freq

pmSuccNonBlindInterFreqHoCsConversational

No

UtranRelation

Inter-Freq

pmSuccNonBlindInterFreqHoCsSpeech12

No

UtranRelation

Inter-Freq

pmSuccNonBlindInterFreqHoPsInteractiveGreater64

No

UtranRelation

Inter-Freq

pmSuccNonBlindInterFreqHoPsInteractiveLess64

No

UtranRelation

Inter-Freq

pmSuccNonBlindInterFreqHoStreamingOther

No

Vc12Ttp

Transport

pmVcBbe

No

Vc12Ttp

Transport

pmVcEs

No

Vc12Ttp

Transport

pmVcSes

No

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 142 of 170 © 2007 AT&T

Add when Streaming QoS is GA

Volume II – Ericsson Field Guide for UTRAN P3

MO Class

Resolution

Counter

Active within scanner

Vc12Ttp

Transport

pmVcUas

No

Reason

Vc4Ttp

Transport

pmVcBbe

No

Vc4Ttp

Transport

pmVcEs

No

Vc4Ttp

Transport

pmVcSes

No

Vc4Ttp

Transport

pmVcUas

No

VclTp

Transport - RNC

pmReceivedAtmCells

National_RNC_P5MD

Dimensioning

VclTp

Transport - RNC

pmTransmittedAtmCells

National_RNC_P5MD

Dimensioning

VpcTp

Transport - RNC

pmBwErrBlocks

No

VpcTp

Transport - RNC

pmBwLostCells

No

VpcTp

Transport - RNC

pmBwMissinsCells

No

VpcTp

Transport - RNC

pmFwErrBlocks

No

VpcTp

Transport - RNC

pmFwLostCells

National_RNC_P5MD

VpcTp

Transport - RNC

pmFwMissinsCells

No

VpcTp

Transport - RNC

pmLostBrCells

National_RNC_P5MD

Troubleshooting

VpcTp

Transport - RNC

pmLostFpmCells

National_RNC_P5MD

Troubleshooting

Troubleshooting

VplTp

Transport - RNC

pmReceivedAtmCells

National_RNC_P5MD

Dimensioning

VplTp

Transport - RNC

pmTransmittedAtmCells

National_RNC_P5MD

Dimensioning

Vt15Ttp

Transport

pmEs

No

Vt15Ttp

Transport

pmSes

No

Vt15Ttp

Transport

pmUas

No

UtranCell

Cell

pmNoRabEstBlockTnSpeechBest

National_RNC_P5MD

Dimensioning

UtranCell

Cell

pmNoRabEstBlockTnPsIntNonHsBest

National_RNC_P5MD

Dimensioning

.

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 143 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

7.2

Recording Activation

As needed, WCDMA Measurement Result Recordings (WMRR) will be specified in this section. Only one RES recording can be run on a given RNC at a time. As well, this recording occupies the maximum number of measurements configurable in an RES recording.

7.2.1 Activation of RES Recording to support Scorecard Data This recording specifies activation of a Radio Environment Statistics (RES) recording that will cause the RNS to command UEs to send periodic Speech BLER measurements. The Tektronix Probes will collect these measurements for use in the Scorecard. Activation of this recording will cause a command to be sent to 50% of the Speech calls established in each RNC. These UEs will then report UL and DL Speech BLER for Speech Only, R99 MultiRAB and HS MultiRAB calls. •

Recording Name: RES test for Tek Probes 50% of UEs

•

Start date 2007-01-17 (today’s date)

•

Repeat: Daily – 365 times

•

Hours 03:20 - 23:35

•

Cell Set: Click “Select Cells…”, click the target RNC, then click “Copy RNCs…”

•

Measurements:

•

•

Service 1 = Speech DL BLER

•

Service 2 = Speech UL BLER

•

Service 3 = Speech + Interactive DL BLER

•

Service 4 = Speech + Interactive UL BLER

•

Service 5 = Speech + InteractiveHS DL BLER

•

Service 6 = Speech + InteractiveHS UL BLER

Click “Sample and Fraction Settings” •

•

ND-00150 Rev. 3.0 09/09/2007

Select 2 seconds for “All Speech Dependent Services

For the “UE Fraction” select “1/2”. Click OK

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 144 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

8. Reference Documents The following documents are related to this document: 1. ALEX Documentation located at http://manchild.wireless.attws.com/cgi-bin/alex a. WCDMA RAN P5 (CXS 101 06/5 R6A) b. WCDMA RNC 3810 P5 c.

Operations Support System (OSS) RC R4, AOM 901 017/4, R1M/4 (C3)

d. WCDMA RBS 3106 P5 (CXP 901 1612/2 R3B) e. WCDMA RBS 3206 P5 (CXP 901 1612/2 R3B) f.

WCDMA RBS 3303 P5 (CXP 901 1612/2 R3B; CXP 901 1612/1 R3B)

2. 3GPP Specification http://www.3gpp.org a. R6 TS 25.101 Clause 5 – Frequency Bands and channel arrangement b. R6 TS 25.101 Clause 6.2.1 – UE maximum output power c.

R6 TS 25.101 Clause 7 – UE Receiver Characteristics

d. R6 TS 25.104 Clause 7 – Node B Receiver Characteristics e. R6 TS 25.214 Annex C – Cell Search Procedure

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 145 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

9. Parameter Reference The following tables provide parameter ranges and default values involved in getting the UE into Idle Mode, Establishing a Call and Maintaining Mobility and Connectivity. They are listed in the same order they were presented. The Level column indicates the network element that owns the parameter. The class column indicates if the parameter is set based on Policy (must be set this way), Rule (must be set this way with exceptions), Fixed (recommended to be set this way) and Variable (set at your discretion). Table 20: Configurable Parameter Lookup Table Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

Unit

uarfcnDl

See section 4.1.2

N/A

N/A

Cell

Variable

Integer

uarfcnUl

See section 4.1.2

N/A

N/A

Cell

Variable

Integer

supportOf16qam

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

Cell

Fixed

Integer

primaryScramblingCode

0 to 511

N/A

0 to 511

Cell

Variable

Integer

-100 to +500

300

300

Cell

Fixed

0.1dBm

Basic Design Requirements

primaryCpichPower Idle Mode primarySchPower

-350 to +150

-18

-18

Cell

Fixed

0.1dB

secondarySchPower

-350 to +150

-35

-35

Cell

Fixed

0.1dB

bchPower

-350 to +150

-31

-31

Cell

Fixed

0.1dB

noOfMibValueTagRetrans

0 to 10

0

0

RNC

Fixed

Retransmissions

sib1PLMNScopeValueTag

0 to 31

N/A

0 to 31

Cell

Variable

Integer

mcc

0 to 999

1

310

RNC

Fixed

Integer

mnc

0 to 999

N/A

410

RNC

Fixed

Integer

sib1StartPos

0 to 4094

4

4

RNC

Fixed

Frames

sib1RepPeriod

4, 8, 16 to 4096

32

32

RNC

Fixed

Frames

sib3StartPos

0 to 4094

2

2

RNC

Fixed

Frames

sib3RepPeriod

4, 8, 16 to 4096

16

16

RNC

Fixed

Frames

sib5StartPos

0 to 4094

6

6

RNC

Fixed

Frames

sib5RepPeriod

4, 8, 16 to 4096

32

32

RNC

Fixed

Frames

sib7StartPos

0 to 4094

2

2

RNC

Fixed

Frames

sib7RepPeriod

4, 8, 16 to 4096

16

16

RNC

Fixed

Frames

sib7expirationTimeFactor

1, 2, 4, 8 to 256

1

1

RNC

Fixed

Factor

sib11StartPos

0 to 4094

20

20

RNC

Fixed

Frames

sib11RepPeriod

4, 8, 16 to 4096

128

128

RNC

Fixed

Frames

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 146 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

sib12StartPos

0 to 4094

14

14

RNC

Fixed

Unit Frames

sib12RepPeriod

4, 8, 16 to 4096

32

32

RNC

Fixed

Frames

nmo

Mode 1 or 2

2

2

RA

Fixed

Integer

cellReserved

RESERVED or NOT_RESERVED

NOT_RESERVED

NOT_RESERVED

Cell

Variable

String

accessClassNbarred

0 to 65535

0

0

Cell

Fixed

Integer

qRxLevMin

-115 to -25

-115

-115

Cell

Fixed

dBm

maxTxPowerUl

-50 to +33

24

24

Cell

Fixed

dBm

qQualMin

-24 to 0

-18

-19

Cell

Fixed

dB

att

0=FALSE, 1=TRUE

1=TRUE

1=TRUE

LA

Fixed

Integer

aichPower

-22 to +5

-6

-6

Cell

Fixed

dB

ConstantValueCprach

-35 to -10

-27

-27

Cell

Fixed

dB

powerOffsetP0

1 to 8

3

2

Cell

Fixed

dB

preambleRetransMax

1 to 64

8

15

Cell

Fixed

Preambles

maxPreambleCycle

1 to 32

4

3

Cell

Fixed

Cycles

powerOffsetPpm

-5 to +10

-4

0

Cell

Fixed

dB 0.1dB

dlInitSirTarget

-82 to 173

41

41

RNC

Fixed

cBackOff

-60 to +60

0

0

RNC

Fixed

0.25dB

ecNoPcpichDefault

-20 to -10

-16

-16

RNC

Fixed

dB

pO2

0 to 24

12

12

RNC

Fixed

0.25dB

pcpichPowerDefault

0 to 50

33

33

RNC

Fixed

dBm

ulInitSirTargetSrb

-82 to 173

57

57

RNC

Fixed

0.1dB

ulInitSirTargetLow

-82 to 173

49

49

RNC

Fixed

0.1dB

ulInitSirTargetHigh

-82 to 173

82

82

RNC

Fixed

0.1dB

ulInitSirTargetExtraHigh

-82 to 173

92

92

RNC

Fixed

0.1dB

cPO

-30 to 30

0

0

RNC

Fixed

0.1dB

lAC

1 to 65533, 65535

N/A

N/A

LA

Variable

Integer

rAC

0 to 255

N/A

N/A

RNC

Variable

Integer

t3212

0 to 255

10

10

LA

Fixed

6minutes

multiRabSp0Available

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

multiRabUdi8Available

0=FALSE, 1=TRUE

0=FALSE

0=FALSE

RNC

Fixed

Binary

psStreaming128

0=FALSE, 1=TRUE

0=FALSE

0=FALSE

RNC

Fixed

Binary

allow384HsRab

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

state128_128Supported

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

pichPower

-10 to +5

-7

-7

Cell

Fixed

dB

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 147 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

pchPower

-350 to 150

-4

-4

RNC

Fixed

Unit 0.1dB

cnDrxCycleLengthCs

6 to 9

6=640

7=1280

RNC

Fixed

coeff

cnDrxCycleLengthPs

6 to 9

7=1280

7=1280

RNC

Fixed

coeff

utranDrxCycleLength

3 to 9

5=320

5=320

RNC

Fixed

coeff

noOfPagingRecordTransm

1 to 5

2

2

RNC

Fixed

Integer

noOfMaxDrxCycles

1 to 10

1

1

RNC

Fixed

DRX cycles

hsdpaUsersAdm

0 to 1000

10

10

Cell

Var.

Users

maxNumHsdpaUsers

1 to 32

16

16

Cell

Var.

Users

compModeAdm

0 to 128

15

15

Cell

Var.

Radio Links

eulServingCellUsersAdm

0 to 100

32

4

Cell

Fixed

E-DCH users

eulNonServingCellUsersAdm

0 to 100

100

10

Cell

Fixed

E-DCH users

dlCodeAdm

0 to 100

80

70

Cell

Var.

%

beMarginDlCode

0 to 20

1

1

Cell

Var.

5%

sf8Adm

0 to 8

8

8

Cell

Fixed

Radio Links

sf16Adm

0 to 16

16

16

Cell

Var.

Radio Links

sf32Adm

0 to 32

32

32

Cell

Var.

Radio Links

sf16gAdm

0 to 16

16

16

Cell

Var.

Radio Links

sf16AdmUl

0 to 50

16

50

Cell

Var.

Radio Links

sf8AdmUl

0 to 50

8

8

Cell

Var.

Radio Links

sf4AdmUl

0 to 1000

0

6

Cell

Var.

Radio Links

pwrAdm

0 to 100

75

75

Cell

Var.

%

maximumTransmissionPower

0 to 500

400

400

Cell

Var.

0.1dBm

beMarginDlPwr

0 to 100

10

10

Cell

Var.

%

pwrAdmOffset

0 to 100

10

10

Cell

Var.

%

aseUlAdm

0 to 500

160

500

Cell

Var.

ASE

beMarginAseUl

0 to 500

20

0

Cell

Var.

ASE

aseUlAdmOffset

0 to 500

40

40

Cell

Var.

ASE

aseDlAdm

0 to 500

240

500

Cell

Var.

ASE

Admission Control

beMarginAseDl

0 to 500

100

0

Cell

Var.

ASE

ulHwAdm

0 to 100

100

80

Site

Var.

%

beMarginUlHw

0 to 100

0

0

Site

Var.

%

dlHwAdm

0 to 100

100

100

Site

Var.

%

beMarginDlHw

0 to 100

0

0

Site

Var.

%

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 148 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

Unit

Call Establishment Related emergencyCallRedirect

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

ulPathlossCheckEnabled

TRUE or FALSE

FALSE

FALSE

Cell

Var.

String

sf4UlPathlossThreshold

15 to 170

170

170

Cell

Var.

dB

loadSharingDirRetryEnabled

0=FALSE, 1=TRUE

0=FALSE

0=FALSE

RNC

Fixed

Binary

loadSharingGsmThreshold

0 to 100

75

100

Cell

Fixed

%

loadSharingGsmFraction

0 to 100

100

100

Cell

Fixed

%

directedRetryTarget

2G Neighbor

N/A

N/A

Cell

Var.

N/A

loadSharingRrcEnabled

0=FALSE, 1=TRUE

0=FALSE

0=FALSE

RNC

Fixed

Binary

loadSharingMargin

0 to 100

0

0

Cell

Fixed

%

loadSharingCandidate

3G Neighbor

N/A

N/A

Nabr

Var.

N/A

hsOnlyBestCell

0=FALSE, 1=TRUE

1=TRUE

1=TRUE

RNC

Fixed

Binary

packetEstMode

0, 1 or 2

1

1

RNC

Fixed

Integer

0=OFF, 1=ON

0=OFF

0=OFF

RNC

Fixed

Binary

sIntraSearch

0=Continually, 1 to 27

0

22=10

Cell

Fixed

dB

sInterSearch

0=Continually, 1 to 27

0

0

Cell

Fixed

dB

sRatSearch

-32 to 20

4

4

Cell

Fixed

dB

sHcsRat

-105 to 91

-105

-105

Cell

Fixed

dB

interFreqFddMeasIndicator

0=FALSE, 1=TRUE

0=FALSE

0=FALSE

Cell

Fixed

Binary

fachMeasOccaCycLenCoeff

0 to 12

0

4

Cell

Fixed

Integer

qualMeasQuantity

1=CPICH_RSCP or 2=CPICH_EC_NO

2=CPICH_EC_NO

2=CPICH_EC_NO

Cell

Fixed

String

qHyst1

0 to 40

4

2

Cell

Fixed

dB dB

activeQueueMgmt Cell Reselection

qHyst2

0 to 40

4

2

Cell

Fixed

qOffset1sn(UtranRelation)

-50 to 50

0

0

Nabr

Fixed

dB

qOffset1sn(GsmRelation)

-50 to 50

7

7

Nabr

Fixed

dB

qOffset2sn

-50 to 50

0

0

Nabr

Fixed

dB

treSelection

0 to 31

2

1

Cell

Fixed

seconds

Intra-Frequency Handover reportingRange1a

0 to 29

6

6

RNC

Fixed

0.5dB

hysteresis1a

0 to 15

0

0

RNC

Fixed

0.5dB

timeToTrigger1a

0 to 15

11=320

11=320

RNC

Fixed

ms

maxActiveSet

2 to 4

3

3

RNC

Fixed

Radio Links

releaseConnOffset

-30 to 120

120

120

RNC

Fixed

0.1dB

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 149 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

reportingInterval1a

0 to 16

3=1

3=1

RNC

Fixed

Unit seconds

measQuantity1

1=CPICH_RSCP or 2=CPICH_EC_NO

2=CPICH_EC_NO

2=CPICH_EC_NO

Cell

Fixed

String

reportingRange1b

0 to 29

10

10

RNC

Fixed

0.5dB

hysteresis1b

0 to 15

0

0

RNC

Fixed

0.5dB

timeToTrigger1b

0 to 15

12=640

12=640

RNC

Fixed

ms

hysteresis1c

0 to 15

2

2

RNC

Fixed

0.5dB

timeToTrigger1c

0 to 15

11=320

11=320

RNC

Fixed

ms

reportingInterval1c

0 to 16

3=1

3=1

RNC

Fixed

seconds

hysteresis1d

0 to 15

15

15

RNC

Fixed

0.5dB

timeToTrigger1d

0 to 15

14=2560

14=2560

RNC

Fixed

ms

filterCoefficient1

0. to 9, 11, 13, 15, 17, 19

2

2

RNC

Fixed

coeff

individualOffset(UtranCell)

-10 to 10

0

0

Cell

Fixed

0.5dB

w1a

0 to 20

0

0

RNC

Fixed

0.1unit

w1b

0 to 20

0

0

RNC

Fixed

0.1unit

Inter-Frequency and Inter-RAT Handover usedFreqThresh2dEcno(hho)

-24 to 0

-12

-12

Cell

Fixed

dB

hysteresis2d

0 to 29

0

4

RNC

Fixed

0.5 dB

timeToTrigger2dEcno

Various

320

320

RNC

Fixed

ms

usedFreqThresh2dRscp(hho)

-115 to -25

-97

-106 ±4

Cell

Fixed

dBm

timeToTrigger2dRscp

Various

320

320

RNC

Fixed

ms

usedFreqThresh2dEcno(sho)

-24 to 0

-12

-15

Cell

Fixed

dB

usedFreqThresh2dRscp(sho)

-115 to -25

-97

-112

Cell

Fixed

dBm

usedFreqThresh2dEcnoDrnc

-24 to 0

-12

-12

RNC

Fixed

dB

usedFreqThresh2dRscpDrnc

-115 to -25

-97

-106

RNC

Fixed

dBm

usedFreqRelThresh2fEcno

0 to 20

1

2

RNC

Fixed

dB

hysteresis2f

0 to 29

0

2

RNC

Fixed

0.5dB

timeToTrigger2fEcno

Various

1280

640

RNC

Fixed

ms

usedFreqRelThresh2fRscp

0 to 20

3

6

RNC

Fixed

dB

txPowerConnQualMonEnabled

0=FALSE, 1=TRUE

1=TRUE

0=FALSE

RNC

Fixed

Binary

timeToTrigger6d

Various

320

320

RNC

Fixed

ms

ueTxPowerThresh6b

-50 to 33

18

21

RNC

Fixed

dB

timeTrigg6b

Various

1280

1280

RNC

Fixed

ms

filterCoefficient2

0. to 9, 11, 13, 15, 17, 19

2

2

RNC

Fixed

coeff

filterCoeff6

0. to 9, 11, 13, 15, 17, 19

19

3

RNC

Fixed

coeff

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 150 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

Unit

usedFreqW2d

0 to 20

0

10

RNC

Fixed

0.1unit

usedFreqW2f

0 to 20

0

10

RNC

Fixed

0.1unit

FddIfHoSupp

0=FALSE, 1=TRUE

0=FALSE

0=FALSE

RNC

Fixed

Binary

FddGsmHoSupp

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

hoType

0=IFHO, 1=GSM, 2=NONE

1

1=GSM_PREFERRED

Cell

Fixed

String

defaultHoType

0=IFHO, 1=GSM, 2=NONE

1

1=GSM_PREFERRED

Cell

Fixed

String

utranRelThresh3aEcno

-10 to 10

-1

2

RNC

Fixed

dB

hysteresis3a

0 to 15

0

4

RNC

Fixed

0.5dB

gsmThresh3a

-115 to 0

-102

-98

RNC

Fixed

dBm

timeToTrigger3a

0 to 15

6=100

6=100

RNC

Fixed

ms

utranRelThresh3aRscp

-20 to 20

-3

7

RNC

Fixed

dB

gsmFilterCoefficient3

0. to 9, 11, 13, 15, 17, 19

1

1

RNC

Fixed

coeff

utranFilterCoefficient3

0. to 9, 11, 13, 15, 17, 19

2

2

RNC

Fixed

coeff

utranW3a

0 to 20

0

10

RNC

Fixed

0.1unit

utranRelThreshRscp

0 to 40

5

5

RNC

Fixed

dB

usedFreqRelThresh4_2bEcno

-10 to 10

-1

-1

RNC

Fixed

dB 0.1dB

hyst4_2b

0 to 75

10

10

RNC

Fixed

nonUsedFreqThresh4_2bEcno

-24 to 0

-11

-13

RNC

Fixed

dB

nonUsedFreqThresh4_2bRscp

-94

-105

RNC

Fixed

dBm

100

100

RNC

Fixed

ms

UsedFreqRelThresh4_2bRscp

-115 to 25 0, 10, 20,40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 -20 to 20

-3

-3

RNC

Fixed

dB

timeToTrigger2fRscp

Various

1280

640

RNC

Fixed

ms

filterCoeff4_2b

0. to 9, 11, 13, 15, 17, 19

2

2

RNC

Fixed

coeff

usedFreqW4_2b

0. to 9, 11, 13, 15, 17, 19

0

0

RNC

Fixed

coeff

nonUsedFreqW4_2b

0. to 9, 11, 13, 15, 17, 19

0

0

RNC

Fixed

coeff

timeTrigg4_2b

HS Cell Change hsQualityEstimate

0=CPICH_EC_NO, 1=CPICH_RSCP

1=RSCP

1=RSCP

RNC

Fixed

Binary

hsHysteresis1d

0 to 75

10

10

RNC

Fixed

0.1dB

hsTimeToTrigger1d

Various

640

640

RNC

Fixed

ms

hsCellChangeAllowed

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

hsToDchTrigger(changeOfBestCellIntraRnc)

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

hsToDchTrigger(servHsChangeIntraRnc)

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

hsToDchTrigger(servHsChangeInterRnc)

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 151 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

Unit

hsToDchTrigger(poorQualityDetected)

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

downswitchThreshold

0 to 32

0

0

RNC

Fixed

1kbit/s

downswitchTimer

0 to 1000

10

100

RNC

Fixed

100ms

downswitchTimerThreshold

0 to 64

0

0

RNC

Fixed

1kbit/s

hsdschInactivityTimer

1 to 255

2

10

RNC

Fixed

seconds

ulRlcBufUpswitch

Various

256

256

RNC

Fixed

bytes

dlRlcBufUpswitch

0 to 2000

500

500

RNC

Fixed

bytes

inactivityTimer

1 to 1440

120

10

RNC

Fixed

seconds

inactivityTimerPch

1 to 240

30

30

RNC

Fixed

minutes

dlDownswitchBandwidthMargin

0 to 100

0

80

RNC

Fixed

%

Channel Switching

dlThroughputDownswitchTimer

0 to 2000

20

20

RNC

Fixed

100ms

ulDownswitchBandwidthMargin

0 to 100

0

80

RNC

Fixed

%

ulThroughputDownswitchTimer

0 to 2000

20

20

RNC

Fixed

100ms

bandwidthMargin

0 to 100

90

90

RNC

Fixed

%

upswitchTimer

0 to 100

5

5

RNC

Fixed

100ms

dlThroughputAllowUpswitchThreshold

0 to 100

0

0

RNC

Fixed

%

downswitchPwrMargin

0 to 20

2

2

RNC

Fixed

0.5dB

coverageTimer

0 to 100

10

10

RNC

Fixed

100ms

upswitchPwrMargin

0 to 20

6

6

RNC

Fixed

0.5dB

bandwidthMarginUl

0 to 100

0

90

RNC

Fixed

%

upswitchTimerUl

0 to 100

5

1

RNC

Fixed

100ms

ulThroughputAllowUpswitchThreshold

0 to 100

0

90

RNC

Fixed

%

reportHysteresis

0 to 20

6

6

RNC

Fixed

0.5dB

downswitchTimerSp

0 to 180

2

2

RNC

Fixed

0.5seconds

ulRlcBufUpswitchMrab

Various

8

8

RNC

Fixed

bytes

dlRlcBufUpswitchMrab

0 to 20

0

8

RNC

Fixed

100bytes

inactivityTimeMultiPsInteractive

0 to 10000

50

50

RNC

Fixed

100ms

queueSelectAlgorithm

1 to 6 0=ACKNOLEDGED or 1=TRANSMITTED

1

3

Cell

Fixed

Integer

1=TRANSMITTED

1=TRANSMITTED

Cell

Fixed

Integer

airRateTypeSelector HSDPA Scheduling eulTargetRate

0 to 6016

128

128

Cell

Fixed

1kbit/s

eulNoReschUsers

0 to 32

5

5

Cell

Fixed

E-DCH users

eulMaxNoSchEdch

0 to 100

100

16

Cell

Fixed

E-DCH users

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 152 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

Unit

eulNoErgchGroups

1. to 4

4

4

Cell

Fixed

E-RGCH groups

eulMaxShoRate

0 to 1472

128

1472

Cell

Fixed

1kbit/s

eulReservedHwBandwidthSchedDataNonServCell

1 to 1472

128

128

Cell

Fixed

1kbit/s

eulThermalLevelPrior

-1150 to -600

-1040

-1040

Cell

Fixed

0.1dBm

eulSlidingWindowTime

10 to 864000

1800

1800

Cell

Fixed

seconds

eulMinMarginCoverage

0 to 1.0

10

10

Cell

Fixed

-

eulNoiseFloorLock

0=FALSE, 1=TRUE

0=FALSE

0=FALSE

Cell

Fixed

-

eulOptimalNoisefloorEstimate

-1150 to -600 or -1

-1040

-1040

Cell

Fixed

0.1dBm

eulMaxRotCoverage

0 to 550

100

100

Cell

Fixed

0.1dB

eulMaxOwnUuLoad

0 to 550

30

80

Cell

Fixed

0.1dB

harqTransmUlTti10Max

1 to 8

4

4

Cell

Fixed

attempts

pwrOffset

0 to 100

5

5

Cell

Fixed

%

pwrHyst

0 to 60000

300

300

Cell

Fixed

ms

iFCong

0 to 621

621

621

Cell

Fixed

0.1dBm 0.1dB

Congestion Detection and Resolution

iFOffset

0 to 621

0

0

Cell

Fixed

iFHyst

0 to 6000

6000

6000

Cell

Fixed

10ms

releaseAseDlNg

0 to 500

3

3

Cell

Fixed

ASE

tmInitialGhs

10 to 100000

500

500

Cell

Fixed

ms

tmInitialG

10 to 100000

3000

3000

Cell

Fixed

ms

tmCongActionNg

500 to 100000

800

800

Cell

Fixed

ms

releaseAseDlGhs

0 to 5000

0

0

Cell

Fixed

0.ASE

tmCongActionGhs

10 to 100000

300

300

Cell

Fixed

ms

releaseAseDl

0 to 500

1

1

Cell

Fixed

ASE

300 to 100000

2000

2000

Cell

Fixed

ms

cchWaitCuT

0 to 200

9

9

RNC

Fixed

5minutes

t305

0 to 7

3=30

3=30

RNC

Fixed

minutes

nOutSyncInd

1 to 256

10

10

Cell

Fixed

frames

tmCongAction Radio Connection Supervision

rlFailureT

0 to 255

10

10

Cell

Fixed

0.1seconds

nInSyncInd

1 to 256

3

3

Cell

Fixed

frames

dchRcLostT

0 to 100

50

50

RNC

Fixed

0.1seconds

hsDschRcLostT

0 to 600

100

100

RNC

Fixed

0.1seconds

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 153 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

Unit

maxFach1Power

-350 to 150

18

18

Cell

Fixed

0.1dB

maxFach2Power

-350 to 150

15

15

Cell

Fixed

0.1dB

pOffset1Fach

0 to 24

0

0

Cell

Fixed

0.1dB

pOffset3Fach

0 to 24

0

0

Cell

Fixed

0.1dB

pO1

0 to 24

0

0

RNC

Fixed

0.25dB

Power and Code Control

pO3

0 to 24

12

12

RNC

Fixed

0.25dB

minPwrRl

-350 to 150

-150

-150

Cell

Fixed

0.1dB

minimumRate

0 to 1600000

1590

1590

Cell

Fixed

10bps

minPwrMax

-350 to 150

0

0

Cell

Fixed

0.1dB

interRate

0 to 1600000

7760

7760

Cell

Fixed

10bps

interPwrMax

-350 to 150

38

38

Cell

Fixed

0.1dB

maxRate

0 to 1600000

40690

40690

Cell

Fixed

10bps

maxPwrMax

-350 to 150

48

48

Cell

Fixed

0.1dB

initShoPowerParam

-20 to 20

-2

-2

RNC

Fixed

1dB

cNbifho

-50 to 150

10

10

RNC

Fixed

0.1dB

dlPcMethod

1 to 4

3=BALANCING

3=BALANCING

RNC

Fixed

Integer

fixedPowerDl

1 to 101

65

65

RNC

Fixed

0.5dB

fixedRefPower

1 to 101

65

65

RNC

Fixed

0.5dB

numHsScchCodes

1 to 4

1

3

Cell

Fixed

codes

flexibleSchedulerOn

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

hsScchMaxCodePower

-35 to 15

-20

-20

Cell

Fixed

0.5dB

hsScchMinCodePower

-35 to 15

-150

-150

Cell

Fixed

0.5dB

qualityCheckPower

-2to 6

0

0

Cell

Fixed

0.5dB

hsPowerMargin

0 to 200

2

2

Cell

Fixed

0.5dB

numHsPdschCodes

1 to 15

5

4

Cell

Fixed

codes

dynamicHsPdschCodeAdditionOn

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

maxNumHsPdschCodes

5 to 15

5

10

Cell

Fixed

codes

ulOuterLoopRegulator

0 or 1

1=JUMP

1=JUMP

RNC

Fixed

Integer

ulSirStep

0 to 50

10

10

RNC

Fixed

0.1dB

blerQualityTargetDl(1,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(2,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 154 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

Unit

blerQualityTargetDl(2,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(2,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(2,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(5,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(5,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(6,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(6,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(18,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(18,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(7,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(7,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(9,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(9,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(9,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(9,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(9,5)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(10,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(10,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(10,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(10,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(10,5)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(11,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(12,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(12,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(12,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(12,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(15,1)

-63 to 0

-30

-30

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(15,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(16,1)

-63 to 0

-30

-30

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(16,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(19,1)

-63 to 0

-30

-30

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(19,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 155 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

Unit

blerQualityTargetDl(19,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(19,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(19,5)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(20,1)

-63 to 0

-30

-30

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(20,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(20,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(20,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetDl(20,5)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(1,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(2,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(2,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(2,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(2,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(5,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(5,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(6,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(6,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(18,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(18,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(7,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(7,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(9,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(9,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(9,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(9,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(9,5)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(10,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(10,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(10,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(10,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(10,5)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(11,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(12,1)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(12,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 156 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

Unit

blerQualityTargetUl(12,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(12,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(15,1)

-63 to 0

-30

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(15,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(16,1)

-63 to 0

-30

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(16,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(19,1)

-63 to 0

-30

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(19,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(19,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(19,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(19,5)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(20,1)

-63 to 0

-30

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(20,2)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(20,3)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(20,4)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

blerQualityTargetUl(20,5)

-63 to 0

-20

-20

RNC

Fixed

10 Log10(BLER)

sirMax

-82 to 173

100

120

RNC

Fixed

0.1dB

sirMin

-82 to 173

-82

-82

RNC

Fixed

0.1dB

deltaAck1

0 to 8

4

5

Cell

Fixed

-

deltaAck2

0 to 8

8

7

Cell

Fixed

-

deltaNack1

0 to 8

4

5

Cell

Fixed

-

deltaNack2

0 to 8

8

7

Cell

Fixed

-

deltaCqi1

0 to 8

4

4

Cell

Fixed

-

deltaCqi2

0 to 8

8

6

Cell

Fixed

-

initialCqiRepetitionFactor

1 to 4

1

1

Cell

Fixed

-

initialAcknackRepetitionFactor

1 to 4

1

1

Cell

Fixed

-

hsMeasurementPowerOffset

-30 to 160

80

80

Cell

Fixed

0.1dB

codeThresholdPdu656

0 to 15

6

6

Cell

Fixed

codes

cqiFeedbackCycle

0 to 160

8

8

Cell

Fixed

ms

cqiErrors

0 to 100

10

10

Cell

Fixed

-

cqiErrorsAbsent

0 to 100

10

10

Cell

Fixed

-

cqiAdjustmentOn

0=FALSE, 1=TRUE

0=FALSE

1=TRUE

RNC

Fixed

Binary

hardIfhoCorr

-5 to +15

3

3

Cell

Fixed

dB

maxUserEhichErgchPowerDl

-35 to 15

3

3

RNC

Fixed

dB

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 157 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

Parameter

Range

Ericsson Default

AT&T Recommended

Level

Class

maxEagchPowerDl

-35 to 15

3

3

RNC

Fixed

dB

transmissionTargetError

1 to 50

3

3

RNC

Fixed

%

ulInitSirTargetEdch

-82 to 173

3

3

RNC

Fixed

0.1dB

ND-00150 Rev. 3.0 09/09/2007

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 158 of 170 © 2007 AT&T

Unit

Volume II – Ericsson Field Guide for UTRAN P3

10. Consulted List The following individuals have participated in the creation of this document through their participation in the National Ericsson UTRAN (NEU) Forum. The name of each participant is provided along with the group (region in parentheses) each participant represents. Area Austin (C)

Chicago (C)

Dallas (C)

Houston (C)

Boston (NE)

San Diego (W)

ND-00150 Rev. 3.0 09/09/2007

Name in Exchange GAL Lewis, Robert S Quinonez, Rick Bendele, Shelia Barrientos, Joseph Richard, Hill Wheat, Mike Hernandez, Hugo Munoz, Domingo Birch, Elizabeth (Lavallee) Bledsoe, Ronald W Olsen, Scott Berner, William Burt, Shannon M Ciszkowski, Jaroslaw Compton, James Kanya Jr, Walter Mahalik Jr, Daniel H Melchior, Christopher Morrisey, Bernadette Sayeed, Adil Stearns, Todd D Vega, Jorge (Eng-Chi) Pasillas, Juan Scharosch, Greg Parkoff, Seth Wang, Jimmy Coleman, Phillip Shelton, David Chan, Rosa Wells, Bobby Steward, H. Jim Smith, J. Mike (NTX) Jackowski, Frank Wheat, Mike Centeno, Edgardo Suarez-rivero, Alberto Gibson, Adrienne Wysocki, Tim Lowery, Rich Leary, Jeff Negi, Lokeshi (LCC) Robinson, John (BOSTON) Melanson, Steve Dunakin, Jeffrey Vieira, Mark Mariano, Jobet Sebastian, Arvin Heath, Tony Doiron, Mike Pinto, Victor Williamson, Andrew Bianco, Paul Bossom, Michael Noet, Mark Olah, Otto Salas, Tony

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 159 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Area

San Francisco / San Jose (W)

Atlanta (SE)

Indianapolis (C) Gary (C) San Antonio (C)

Oklahoma City (C)

Raleigh

Citrus / Tampa / Lakeland (SE)

Daytona / Orlando / Cape Canavera / Boca Raton (SE) aka S. FL

Boca Raton (SE) (S. FL)

Gainesville / Tallahassee / Jacksonville (SE) aka N. FL

ND-00150 Rev. 3.0 09/09/2007

Name in Exchange GAL Taylor, Chris K Banchongsirichareon, Soontorn Chan, Christopher Patel, Chetan Caniglia, Michael Albrecht, Frank Parra, Darwin Arefin, S Suh, Young Abdul, Majdi Murdock, Monty Pitzini, Marcel Neuman, Rick Lavender, Tyann Corbett, Jason Henderson, Tom Won Jr, Toussant Jabbary, Ali Perry, Ben Sieber, John Bledsoe, Ronald W Salyer, David Tadlock, Jimmie Bongiorno, Matt Cisneros, Ivan LaLonde, Michael Pilgrim, Pam Smedley, Dale Benson, Brent Bickle, Jerry Brunnert, David LaCava, Dave Jacob, Taylor Orsak, Joseph Althaf, Mohammed Birkey, Jeff McKenney, Scott Self, Roger Hussain, Umer Combs, Tom Raymundo, Fellou Ziers, Kirk Li, Sandy Hoshyar, Zana Ramos, Wilson Chiodo, Russ Gomez, Marcel Vencl, Lu Pinto, Avelino Chang, Marty Mills, Peter Flores, Laura V FL Douglas, Handel Graham, Joseph Guidry, Aaron Fanning, Thomas Dinges, Chris Habib, Jamal Joyce, Sharon Araujo, Noemi Bravo, Felix Ward, Joseph Reilly, Joe Austin, Ken

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 160 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Area

Charlotte (SE)

Vallejo (W) Fresno, Sacramento, Stockton (W)

Little Rock (C) Tulsa (C) Miami / West Palm Beach (SE) Milwaukee (C) Birmingham (SE)

Knoxville, TN (SE)

Pittsburgh (C) Bridgeport / Hartford / New Haven, CT (NE) Providence (NE)

San Juan (SE)

Baton Rouge / New Orleans (SE)

Louisville / Memphis / Nashville (SE)

ND-00150 Rev. 3.0 09/09/2007

Name in Exchange GAL Keys, Kraig Bush, Patricia Sewell, David Kunakorn, Jay Dennis, Michael Brown, Steven C Albrecht, Frank Albrecht, Frank Appert, Douglas Riar, Paul Mirano, Edmund Patel, Neville Pack, Mark Howell, Bill Pittman, Donald DiMaso, Filippo Kommer, James Bowling, Garry Thomas, Randy Warr, Amanda Workman, Owen George, Monty Cookson, Ken Webb, David Albright, Anthony Warwick, Robert Hood, Edwan Harris, James M. Lee, Bryon Mitchell, Terri A Helle, Erika Helle, Steve Cook, John Z Thomas, Matthew Dugan, Shawn Klein, Robert S. Saddig Jr., Walter C. Crawford, Ken Negi, Lokeshi (LCC) Biernat, S. Irek Ownbey, Jason Ezquerra, Guillermo Smith, Todd R Velez, Wilfredo Ortiz, Leslie L. Casillas, Roberto Diaz, William Turlington, David Deets, Bernie George, Monty Jones, Robert Stephens, Mike Andre, Tracy Salvo, Mike Kiefer, Ron Green, Tracey Matthews, Brian McNear, Jerome Torrence, Tina Corbett, Brian Horn, Byron Schutts, Will Lewis, Mike Dunn, Jerry

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 161 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Area

Evansville (SE) Clarksville (SE)

Chattanooga (SE) Greensboro (SE) Columbia (SE) Los Angeles / Bakersfield / Oxnard (W)

ND-00150 Rev. 3.0 09/09/2007

Name in Exchange GAL Plantz, William Bale, Jeff Sigmon, Edward Batson, Wynn Taylor, Lyle Gillian, Tara Bennett, Danny Horton, Jarrod Antonaccio, Lenny Nance, John Eskew, Steve Campbell, Tim Rohdy, John Krug, Donald Reeves, Larry Williams, John S Fontela, Gonzalo Kerchief, Brian Wahnsiedler, John Knepler, Andrew Wilbanks, Richard Duncan, Trudy Martin, Brent Hedges, David Bodford, Paul Shahoud, Joe Alfakir, Sam Hollister, Jim Wan, Wang Hussain, Zahid Singh, Bhupender Nguyen, Tom Jin, Min Polard, Essie Banuelos, Monica Noet, Mark Heeney-Fouts, Kathleen Monroe, Richard Diaz, Jimmy Wan, Wang Noonan, Robert Hernandez, Carlos C Abdullah, Haris Moreno, Orlando Nguyen, Tuong Masada, Gary Santos, Christian Rubin, Robert Melton, Sean Qazi, Adil Barnett, Marlion Papadopoulos, Dimitris Usmani, Ehtesham Chow, Gary Kilic, Semsettin Ahad, Adil Hilario, Marissa Taylor, Chris K Cram, Steve Sharma, Amitabh Shimizu, Nelson Fayaz, Mohammad Lopez, Trin Hurst, Fred

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 162 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Area

New Bedford, CT (NE) McAllen (C) Honolulu (W) El Paso (C) Newport News, Norfolk (NE) Richmond (NE)

Mobile (SE) Greenville (SE) Charleston / Cabarrus (SE) Virginia / West Virginia (SE) Western Region

Central Region

Northeast Region

ND-00150 Rev. 3.0 09/09/2007

Name in Exchange GAL Jones, Harold M Mohammed, Aleemuddin Siddiqui, Zafar Emina, Henry Fahs, Najib Madregallejo, Daniel Petelo, Paul Islam, Md Khan, Salman Ghazali, Noman Assan, Emmanuel Osztermann, Gabriel Dixon, Edward Slowinski, Marek Olah, Otto Qureshi, Jamal Celik, Yilmaz Yoeu, Abdul Z Klein, Robert S. Tadlock, Jimmie Oshiro, Henry Rocha, S. Adrian Mughal, Naeem Khalaf, Emile (Tony) Mughal, Naeem Patel, Vipul Tolbert, Michael Hill, Tommy Draper, Trent Petree, Howard Tyson, Roger Abedin, Tariq Costanzo, Ross Young, James Caine, Richard Ulanday, Daniel Clark, Robert I. Solis, Bobie Eter, Elias Azam, Shehzad (OSS) Delany, Clive Venkatesalu, Ramkumar Akkaya, Sinan Puttabuddi, Kiran (OSS) Hawkes, Peter Shen, Chun Palmer, Craig Aguon, Paul (OSS) Thompson, Nicholas R Baltazar, Alona Ye, Weihua Gupta, Sandeep Ion, Florian Ryan, William P Cai, Nancy Garcia, Oscar Zahan, Eusebiu Robinson, William Apollonio, Laura May, Christopher (OSS) Khuu, Khoa Davis, Richard J

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 163 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Area

South

Strategic Planning (CTO)

National Field Support

National Quality and Performance (national scorecard)

National Services Operations Network Support Subscriber Product Engineering National RF Engineering

ND-00150 Rev. 3.0 09/09/2007

Name in Exchange GAL Elliott, John J. (OSS) Rai, Paritosh Gray, Randal (Randy) McCarthy, Brian Chopra, Namita Hetrick, Kevin Langley, Brett Fix, Jeremy Salmon, Michael Grabau, Mike Ballard, Troy Powell, Lamont Ask Lamont (OSS) Murray, Arthur Ramos, Wilson Tayyebi, Sean Robertson, Stuart Vallath, Sree Sam, Anthony Choi-Grogan, Shirley Orloff, David Portzer, Bruce Unny, Pradeep Gopalan, Rajasekhar (Raja) Huber, Kurt D. Bigler, Laurie A Bakhtiari, Farideh (OSS) Clendenen, Dave (OSS) Kelly, Thomas HQ (OSS) Brisebois, Art Heubel, Michael Tong, Hendry Smith, Juan (Derrick) Carrillo, Joe Scheihing, Terry Davis, Charles Mascarenhas, Patrick Thompson, Edmund (Eddie) Patini, Joe Hristov, Hristo Razdan, Somesh Barnes, Karen Jaidi, Khalil Kim, Agnes Holmberg, Erik Elf, Mats Wiese, Bill Hurst, Fred Heeney-Fouts, Kathleen Kim, Yon Villapando, Vladimir Schiefelbein, Lee Broderick, John Ellis, Steve Schiefelbein, Lee Phillips, Larry Bell, Wayne Jann, Petr James, Dan Lee, Bo Salazar, Gil Delmendo, Eddie Hlavaty-Laposa, Michael Herndon, Al

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 164 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3 Area

National PMO Subscriber Services Ericsson

Award Solutions Qualcomm National OSS Group

ND-00150 Rev. 3.0 09/09/2007

Name in Exchange GAL Narang, Ashish Swanson, Kurt R Kapoulas, Spyridon Gohel, Kaushik Connell, Donna Pratt, Jim Abad, Younes (UTRAN) Inge, Johnsson (OSS) Dirocco, Andrea (UTRAN) Mao, Tom (UTRAN) Zabka, Craig (West Region) Statnikov, Mark (Central Region) Wallen, Mats (SouthEast Region) Magnus, Hedenlund (NorthEast Region) Celedon, Rafael Mir, Nabeel Hatipoglu, Can Jianli Wang J (PL/EUS) Collins, Kerwin Tripathi, Manish Dodge, Chris (OSS) Glunt, Robb (OSS) Padowski, Dan (OSS) Riley, Tyrus (OSS) Shows, Darren (OSS) Zurbriggen, Mark (OSS) May, Christopher (OSS)

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 165 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

11. Index A accessClassNbarred ................................27, 147 activeQueueMgmt ....................................51, 149 aichPower...........................................25, 29, 147 airRateTypeSelector ................................86, 152 allow384HsRab ............................36, 42, 50, 147 aseDlAdm.................................................46, 148 aseUlAdm.................................................45, 148 aseUlAdmOffset .......................................45, 148 att ...................................................9, 24, 28, 147 B bandwidthMargin......................................80, 152 bandwidthMarginUl ..................................82, 152 bchPower .................................................23, 146 beMarginAseDl.........................................46, 148 beMarginAseUl.........................................45, 148 beMarginDlCode ......................................41, 148 beMarginDlHw..........................................48, 148 beMarginDlPwr.........................................43, 148 beMarginUlHw..........................................47, 148 blerQualityTargetDl(1,1).................................154 blerQualityTargetDl(10,1)...............................155 blerQualityTargetDl(10,2)...............................155 blerQualityTargetDl(10,3)...............................155 blerQualityTargetDl(10,4)...............................155 blerQualityTargetDl(10,5)...............................155 blerQualityTargetDl(11,1)...............................155 blerQualityTargetDl(12,1)...............................155 blerQualityTargetDl(12,2)...............................155 blerQualityTargetDl(12,3)...............................155 blerQualityTargetDl(12,4)...............................155 blerQualityTargetDl(15,1)...............................155 blerQualityTargetDl(15,2)...............................155 blerQualityTargetDl(16,1)...............................155 blerQualityTargetDl(16,2)...............................155 blerQualityTargetDl(18,1)...............................155 blerQualityTargetDl(18,2)...............................155 blerQualityTargetDl(19,1)...............................155 blerQualityTargetDl(19,2)...............................155 blerQualityTargetDl(19,3)...............................156 blerQualityTargetDl(19,4)...............................156 blerQualityTargetDl(19,5)...............................156 blerQualityTargetDl(2,1).................................154 blerQualityTargetDl(2,2).................................155 blerQualityTargetDl(2,3).................................155 blerQualityTargetDl(2,4).................................155 blerQualityTargetDl(20,1)...............................156 blerQualityTargetDl(20,2)...............................156 blerQualityTargetDl(20,3)...............................156

ND-00150 Rev. 3.0 09/09/2007

blerQualityTargetDl(20,4) .............................. 156 blerQualityTargetDl(20,5) .............................. 156 blerQualityTargetDl(5,1) ................................ 155 blerQualityTargetDl(5,2) ................................ 155 blerQualityTargetDl(6,1) ................................ 155 blerQualityTargetDl(6,2) ................................ 155 blerQualityTargetDl(7,1) ................................ 155 blerQualityTargetDl(7,2) ................................ 155 blerQualityTargetDl(9,1) ................................ 155 blerQualityTargetDl(9,2) ................................ 155 blerQualityTargetDl(9,3) ................................ 155 blerQualityTargetDl(9,4) ................................ 155 blerQualityTargetDl(9,5) ................................ 155 blerQualityTargetUl(1,1) ................................ 156 blerQualityTargetUl(10,1) .............................. 156 blerQualityTargetUl(10,2) .............................. 156 blerQualityTargetUl(10,3) .............................. 156 blerQualityTargetUl(10,4) .............................. 156 blerQualityTargetUl(10,5) .............................. 156 blerQualityTargetUl(11,1) .............................. 156 blerQualityTargetUl(12,1) .............................. 156 blerQualityTargetUl(12,2) .............................. 156 blerQualityTargetUl(12,3) .............................. 157 blerQualityTargetUl(12,4) .............................. 157 blerQualityTargetUl(15,1) .............................. 157 blerQualityTargetUl(15,2) .............................. 157 blerQualityTargetUl(16,1) .............................. 157 blerQualityTargetUl(16,2) .............................. 157 blerQualityTargetUl(18,1) .............................. 156 blerQualityTargetUl(18,2) .............................. 156 blerQualityTargetUl(19,1) .............................. 157 blerQualityTargetUl(19,2) .............................. 157 blerQualityTargetUl(19,3) .............................. 157 blerQualityTargetUl(19,4) .............................. 157 blerQualityTargetUl(19,5) .............................. 157 blerQualityTargetUl(2,1) ................................ 156 blerQualityTargetUl(2,2) ................................ 156 blerQualityTargetUl(2,3) ................................ 156 blerQualityTargetUl(2,4) ................................ 156 blerQualityTargetUl(20,1) .............................. 157 blerQualityTargetUl(20,2) .............................. 157 blerQualityTargetUl(20,3) .............................. 157 blerQualityTargetUl(20,4) .............................. 157 blerQualityTargetUl(20,5) .............................. 157 blerQualityTargetUl(5,1) ................................ 156 blerQualityTargetUl(5,2) ................................ 156 blerQualityTargetUl(6,1) ................................ 156 blerQualityTargetUl(6,2) ................................ 156 blerQualityTargetUl(7,1) ................................ 156 blerQualityTargetUl(7,2) ................................ 156 blerQualityTargetUl(9,1) ................................ 156 blerQualityTargetUl(9,2) ................................ 156 blerQualityTargetUl(9,3) ................................ 156

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 166 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

blerQualityTargetUl(9,4).................................156 blerQualityTargetUl(9,5).................................156 C cBackOff...................................................31, 147 cchWaitCuT..............................................91, 153 cellReserved ......................................25, 27, 147 cNbifho .....................................................93, 154 cnDrxCycleLengthCs .........................25, 38, 148 cnDrxCycleLengthPs..........................25, 38, 148 codeThresholdPdu656 ...................................157 compModeAdm ........................................39, 148 ConstantValueCprach ........................25, 29, 147 coverageTimer .........................................83, 152 cPO ....................................................32, 33, 147 cqiAdjustmentOn............................................157 cqiErrors .........................................................157 cqiErrorsAbsent..............................................157 cqiFeedbackCycle..........................................157 D dchRcLostT ..............................................91, 153 defaultHoType................................2, 11, 63, 151 deltaAck1........................................................157 deltaAck2........................................................157 deltaCqi1 ........................................................157 deltaCqi2 ........................................................157 deltaNack1 .....................................................157 deltaNack2 .....................................................157 directedRetryTarget .................................50, 149 dlCodeAdm ..............................................41, 148 dlDownswitchBandwidthMargin ...............78, 152 dlHwAdm ..................................................48, 148 dlInitSirTarget...............................31, 92, 93, 147 dlPcMethod ..............................................93, 154 dlRlcBufUpswitch .....................................75, 152 dlRlcBufUpswitchMrab .............................85, 152 dlThroughputAllowUpswitchThreshold.....80, 152 dlThroughputDownswitchTimer ...............78, 152 downswitchPwrMargin .......................80, 83, 152 downswitchThreshold.........................71, 73, 152 downswitchTimer ...............................71, 73, 152 downswitchTimerSp .................................84, 152 downswitchTimerThreshold .....................73, 152 dynamicHsPdschCodeAdditionOn...........94, 154 E ecNoPcpichDefault.............................31, 93, 147 emergencyCallRedirect............................49, 149 eulMaxNoSchEdch...................................87, 152 eulMaxOwnUuLoad..................................88, 153 eulMaxRotCoverage ................................87, 153

ND-00150 Rev. 3.0 09/09/2007

eulMaxShoRate .......................................87, 153 eulMinMarginCoverage............................87, 153 eulNoErgchGroups ..................................87, 153 eulNoiseFloorLock ...................................87, 153 eulNonServingCellUsersAdm ..................39, 148 eulNoReschUsers ....................................87, 152 eulOptimalNoisefloorEstimate ....................... 153 eulReservedHwBandwidthSchedDataNonServC ell................................................................ 153 eulServingCellUsersAdm.........................39, 148 eulSlidingWindowTime ............................87, 153 eulTargetRate ..........................................87, 152 eulThermalLevelPrior...............................87, 153 F fachMeasOccaCycLenCoeff ....................52, 149 FddGsmHoSupp ......................................63, 151 FddIfHoSupp............................................63, 151 filterCoeff4_2b..........................................69, 151 filterCoeff6................................................62, 150 filterCoefficient1 .......................................57, 150 filterCoefficient2 .......................................62, 150 fixedPowerDl............................................93, 154 fixedRefPower..........................................94, 154 flexibleSchedulerOn.................................94, 154 G gsmFilterCoefficient3 ...............................66, 151 gsmThresh3a ...............................64, 65, 66, 151 H hardIfhoCorr................................................... 157 harqTransmUlTti10Max ...........................88, 153 hoType .....................................................63, 151 hsCellChangeAllowed..............................70, 151 hsdpaUsersAdm ......................................39, 148 hsdschInactivityTimer ..............................74, 152 hsDschRcLostT........................................91, 153 hsHysteresis1d ........................................70, 151 hsMeasurementPowerOffset ......................... 157 hsOnlyBestCell ........................................50, 149 hsPowerMargin ........................................94, 154 hsQualityEstimate ....................................70, 151 hsScchMaxCodePower ...........................94, 154 hsScchMinCodePower ............................94, 154 hsTimeToTrigger1d..................................70, 151 hsToDchTrigger(changeOfBestCellIntraRnc). 70, 151 hsToDchTrigger(poorQualityDetected)..... 58, 71, 152 hsToDchTrigger(servHsChangeInterRnc)70, 151 hsToDchTrigger(servHsChangeIntraRnc)70, 151

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 167 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

hyst4_2b.......................................67, 68, 69, 151 hysteresis1a .......................................26, 54, 149 hysteresis1b .......................................26, 55, 150 hysteresis1c .......................................26, 56, 150 hysteresis1d .......................................26, 57, 150 hysteresis2d .......................................58, 59, 150 hysteresis2f ..............................................60, 150 hysteresis3a .................................64, 65, 66, 151 I iFCong......................................................90, 153 iFHyst .......................................................90, 153 iFOffset.....................................................90, 153 inactivityTimeMultiPsInteractive...............86, 152 inactivityTimer ..........................................76, 152 inactivityTimerPch ....................................77, 152 individualOffset(UtranCell) .... 57, 63, 66, 69, 150 initialAcknackRepetitionFactor.......................157 initialCqiRepetitionFactor ...............................157 initShoPowerParam .................................93, 154 interFreqFddMeasIndicator ......................52, 149 interPwrMax .............................................92, 154 interRate...................................................92, 154 L lAC......................................................24, 34, 147 loadSharingCandidate..............................50, 149 loadSharingDirRetryEnabled ...................50, 149 loadSharingGsmFraction .........................50, 149 loadSharingGsmThreshold ......................50, 149 loadSharingMargin ...................................50, 149 loadSharingRrcEnabled ...........................50, 149 M maxActiveSet .....................................54, 56, 149 maxEagchPowerDl...................................97, 158 maxFach1Power ......................................91, 154 maxFach2Power ......................................91, 154 maximumTransmissionPower 11, 43, 80, 83, 88, 94, 148 maxNumHsdpaUsers ...............................39, 148 maxNumHsPdschCodes ..........................94, 154 maxPreambleCycle ..................................29, 147 maxPwrMax .............................................92, 154 maxRate ...................................................92, 154 maxTxPowerUl...................................25, 28, 147 maxUserEhichErgchPowerDl...................97, 157 mcc...........................................................24, 146 measQuantity1 ...................................55, 56, 150 minimumRate ...........................................92, 154 minPwrMax...............................................92, 154 minPwrRl ..................................................92, 154

ND-00150 Rev. 3.0 09/09/2007

mnc ..........................................................24, 146 multiRabSp0Available..............................36, 147 multiRabUdi8Available.............................36, 147 N nInSyncInd ...............................................91, 153 nmo ..........................................................25, 147 nonUsedFreqThresh4_2bEcno..........67, 68, 151 nonUsedFreqThresh4_2bRscp....67, 68, 69, 151 nonUsedFreqW4_2b................................69, 151 noOfMaxDrxCycles ..................................38, 148 noOfMibValueTagRetrans .......................23, 146 noOfPagingRecordTransm ......................38, 148 nOutSyncInd ............................................91, 153 numHsPdschCodes .................................94, 154 numHsScchCodes ...................................94, 154 P packetEstMode ........................................51, 149 pchPower .................................................38, 148 pcpichPowerDefault.................................33, 147 pichPower ..........................................25, 37, 147 pO1 ..............................................31, 32, 92, 154 pO2 ....................................................31, 32, 147 pO3 ..............................................31, 32, 92, 154 pOffset1Fach ...........................................92, 154 pOffset3Fach ...........................................92, 154 powerOffsetP0 ...................................26, 29, 147 powerOffsetPpm ......................................30, 147 preambleRetransMax ........................26, 29, 147 primaryCpichPower.....19, 25, 29, 31, 32, 33, 92, 93, 97, 146 primarySchPower.....................................22, 146 primaryScramblingCode ..............18, 19, 23, 146 psStreaming128.......................................36, 147 pwrAdm........................................43, 50, 88, 148 pwrAdmOffset ....................................43, 88, 148 pwrHyst ....................................................88, 153 pwrOffset..................................................88, 153 Q qHyst1......................................................53, 149 qHyst2................................................25, 53, 149 qOffset1sn(GsmRelation) ....................9, 53, 149 qOffset1sn(UtranRelation) ...................9, 53, 149 qOffset2sn................................................53, 149 qQualMin......................................25, 28, 52, 147 qRxLevMin .............................25, 27, 28, 52, 147 qualityCheckPower ..................................94, 154 qualMeasQuantity ..............................25, 53, 149 queueSelectAlgorithm..............................86, 152

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 168 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

R rAC .....................................................25, 34, 147 releaseAseDl............................................91, 153 releaseAseDlGhs .....................................90, 153 releaseAseDlNg .......................................90, 153 releaseConnOffset .............................54, 56, 149 reportHysteresis .......................................83, 152 reportingInterval1a ...................................54, 150 reportingInterval1c ...................................56, 150 reportingRange1a ..............................26, 54, 149 reportingRange1b ..............................26, 55, 150 rlFailureT ..................................................91, 153 S secondarySchPower ................................23, 146 sf16Adm ...................................................42, 148 sf16AdmUl................................................42, 148 sf16gAdm .................................................42, 148 sf32Adm ...................................................42, 148 sf4AdmUl..................................................42, 148 sf4UlPathlossThreshold ...........................50, 149 sf8Adm .....................................................42, 148 sf8AdmUl..................................................42, 148 sHcsRat..............................................25, 52, 149 sib11RepPeriod........................................24, 146 sib11StartPos...........................................24, 146 sib12RepPeriod........................................24, 147 sib12StartPos...........................................24, 147 sib1PLMNScopeValueTag .................24, 27, 146 sib1RepPeriod..........................................24, 146 sib1StartPos.............................................24, 146 sib3RepPeriod..........................................24, 146 sib3StartPos.............................................24, 146 sib5RepPeriod..........................................24, 146 sib5StartPos.............................................24, 146 sib7expirationTimeFactor.........................26, 146 sib7RepPeriod....................................24, 26, 146 sib7StartPos.............................................24, 146 sInterSearch.............................................52, 149 sIntraSearch.............................................52, 149 sirMax.............................................................157 sirMin..............................................................157 sRatSearch ........................................25, 52, 149 state128_128Supported...........................37, 147 supportOf16qam ......................................15, 146 T t305 ..........................................................91, 153 t3212 ..................................................24, 34, 147 timeToTrigger1a.................................26, 54, 149 timeToTrigger1b.................................26, 55, 150 timeToTrigger1c .................................26, 56, 150

ND-00150 Rev. 3.0 09/09/2007

timeToTrigger1d.................................26, 57, 150 timeToTrigger2dEcno ........................58, 59, 150 timeToTrigger2dRscp ........................58, 59, 150 timeToTrigger2fEcno ...............................60, 150 timeToTrigger2fRscp ...............................60, 151 timeToTrigger3a...........................64, 65, 66, 151 timeToTrigger6d.................................11, 61, 150 timeTrigg4_2b ..............................67, 68, 69, 151 timeTrigg6b ..............................................62, 150 tmCongAction ..........................................91, 153 tmCongActionGhs....................................90, 153 tmCongActionNg......................................90, 153 tmInitialG............................................90, 91, 153 tmInitialGhs ..............................................90, 153 transmissionTargetError ..........................97, 158 treSelection ........................................25, 53, 149 txPowerConnQualMonEnabled .........61, 62, 150 U uarfcnDl........................................11, 13, 63, 146 uarfcnUl....................................................13, 146 ueTxPowerThresh6b ...............................62, 150 ulDownswitchBandwidthMargin ...............79, 152 ulHwAdm..................................................47, 148 ulInitSirTargetEdch ..................................97, 158 ulInitSirTargetExtraHigh...........................33, 147 ulInitSirTargetHigh ...................................33, 147 ulInitSirTargetLow ....................................33, 147 ulInitSirTargetSrb .....................................33, 147 ulOuterLoopRegulator .............................94, 154 ulPathlossCheckEnabled.........................50, 149 ulRlcBufUpswitch .....................................75, 152 ulRlcBufUpswitchMrab.............................85, 152 ulSirStep ..................................................94, 154 ulThroughputAllowUpswitchThreshold ....82, 152 ulThroughputDownswitchTimer ...............79, 152 upswitchPwrMargin..................................80, 152 upswitchTimer..........................................80, 152 upswitchTimerUl ......................................82, 152 usedFreqRelThresh2fEcno......................60, 150 usedFreqRelThresh2fRscp......................60, 150 usedFreqRelThresh4_2bEcno.................67, 151 UsedFreqRelThresh4_2bRscp ..........68, 69, 151 usedFreqThresh2dEcno(hho)..................58, 150 usedFreqThresh2dEcno(sho) ..................59, 150 usedFreqThresh2dEcnoDrnc...................59, 150 usedFreqThresh2dRscp(hho)..............9, 58, 150 usedFreqThresh2dRscp(sho) ..................59, 150 usedFreqThresh2dRscpDrnc...................59, 150 usedFreqW2d ..........................................63, 151 usedFreqW2f ...........................................63, 151 usedFreqW4_2b ......................................69, 151 utranDrxCycleLength ...............................38, 148 utranFilterCoefficient3.................................... 151

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 169 of 170 © 2007 AT&T

Volume II – Ericsson Field Guide for UTRAN P3

utranRelThresh3aEcno ............................64, 151 utranRelThresh3aRscp ......................65, 66, 151 utranRelThreshRscp ..........................66, 69, 151 utranW3a..................................................67, 151

ND-00150 Rev. 3.0 09/09/2007

W w1a ..........................................................58, 150 w1b ..........................................................58, 150

AT&T CONFIDENTIAL & PROPRIETARY Use pursuant to Company instructions

Page 170 of 170 © 2007 AT&T