Cr Combine Product Support

New Holland CR Combines Product Support Kit Catalog

TABLE OF CONTENTS Description

Page

Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Agitator Threshing Pins . . . . . . . . . . . . . . . . . . . . . 25 Auger Bearing Kits . . . . . . . . . . . . . . . . . . . . . . 5, 18 Auger Drive Kit - Reduced Speed . . . . . . . . . . . . . 12 Auger Finger Shaft Bearing Kit . . . . . . . . . . . . . . . . 8 Automated Lubrication System . . . . . . . . . . . . . . . 32 Axle Extension Kit . . . . . . . . . . . . . . . . . . . . . . . . . 23 Bearing Kit - Tailings . . . . . . . . . . . . . . . . . . . . . . 19 Beater Grate Cover Plates. . . . . . . . . . . . . . . . . . . 25 Bulk Tines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Chain Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Chopper Knife Kit . . . . . . . . . . . . . . . . . . . . . . . . . 20 Cleaning System Kits . . . . . . . . . . . . . . . . . . . . . . 17 Combine Lighting Kits . . . . . . . . . . . . . . . . . . . . . . 21 Concave Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Concave Awning Plates. . . . . . . . . . . . . . . . . . . . . 24 Coolant Heater Kit. . . . . . . . . . . . . . . . . . . . . . . . . 27 Corn Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . 24 Corn Head Repair Kits, Service Packs . . . . . . . . . 10 Crop Dividers and Accessories . . . . . . . . . . . . . . 7, 9 Cutter Bar Rebuild Kits . . . . . . . . . . . . . . . . . . . . . . 6 Cutting Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Dealer Installed Kits . . . . . . . . . . . . . . . . . . . . . 28-30 Deluxe Service Lighting Kit . . . . . . . . . . . . . . . . . . 21 Drive Shaft Bearing Kit . . . . . . . . . . . . . . . . . . . . . . 5 Ear Saver/Tall Corn Kit . . . . . . . . . . . . . . . . . . . . . 11 Extenda-WearTM Chains . . . . . . . . . . . . . . . . . . . . . 10 Extension Kit - Axle . . . . . . . . . . . . . . . . . . . . . . . . 23 Extension Kit - Platform. . . . . . . . . . . . . . . . . . . . . 23 Feeder Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Fire Extinguisher Kit. . . . . . . . . . . . . . . . . . . . . . . . 27 Grain Handling Kits . . . . . . . . . . . . . . . . . . 18, 19, 26 Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Header Auger Fingers and Kits . . . . . . . . . . . . . . 7, 8 Header Sweep Kit . . . . . . . . . . . . . . . . . . . . . . . . . . 7 HID Light Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Hook Kit for Side Shields. . . . . . . . . . . . . . . . . . . . 27 Knife Drive Assembly. . . . . . . . . . . . . . . . . . . . . . . . 8 Latch Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Lighting Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Lower Sieve-Adjustable . . . . . . . . . . . . . . . . . . . . . 23 Lug Kit - Rotors. . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2

Description

Page

Moisture Testers . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Moisture-Max & Moisture-Max Plus. . . . . . . . . . . . 33 Paddle Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Paddle Kit - Tailings Auger . . . . . . . . . . . . . . . . . . 19 Perforated Cross Auger and Elevator Cover Kit . . . 26 Plate and Lug Kit - Both Rotors . . . . . . . . . . . . . . 15 Plate and Lug Kit - One Rotor . . . . . . . . . . . . . . . . 15 Plate Kits - Rotor. . . . . . . . . . . . . . . . . . . . . . . . . . 15 Platform Extension Kit . . . . . . . . . . . . . . . . . . . . . . 23 Poly Hoods, Divider Kits, and Completing Kits . . . 11 Poly-Skid Shoe Kits. . . . . . . . . . . . . . . . . . . . . . . . . 9 Power-Luber® . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Pre-Sieve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Rasp Bar Kit - Both Rotors . . . . . . . . . . . . . . . . . . 15 Rasp Bar Kit - Leading . . . . . . . . . . . . . . . . . . 15, 16 Rasp Bar Kit - One Rotor . . . . . . . . . . . . . . . . . . . 15 Rasp Bar Kit - Smooth . . . . . . . . . . . . . . . . . . . . . 25 Rasp Bar Kit - Trailing . . . . . . . . . . . . . . . . . . . 15, 16 Ready Stock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Reel Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Roller Assist Kit for Standard Straw Chopper . . . . 26 Round Bar Concaves . . . . . . . . . . . . . . . . . . . . . . 24 Rotor Assembly - Complete . . . . . . . . . . . . . . . . . 13 Rotor Divider Kit . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Rotor Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15 Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Separator Fins Corn Wedge Kit. . . . . . . . . . . . . . . 25 Separator Grates. . . . . . . . . . . . . . . . . . . . . . . . . . 25 Shaker Shoe Bushing Kits . . . . . . . . . . . . . . . . . . . 17 Sieve Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Spread Enhancing Chopper Kit . . . . . . . . . . . . . . . 26 Stainless Grain Tank Cross Auger Trough Liner Kit . . 26 Straw Chopper Slow Down Kit . . . . . . . . . . . . . . . 26 Three Beacon Light Kit . . . . . . . . . . . . . . . . . . . . . 21 Three Way Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Tine Service Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Traction Platform Kits/Threshing & Separating Kits . 23 Unloading Auger 3' Extension Kit . . . . . . . . . . . . . 26 Voyager Observation System. . . . . . . . . . . . . . . . . 22 Weed Knife Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Wheel Weight Kit. . . . . . . . . . . . . . . . . . . . . . . . . . 23 Windshield Washer Kit. . . . . . . . . . . . . . . . . . . . . . 27

COMBINE MAINTENANCE

PRE-HARVEST PLANNING New Holland has developed combine product support kits that are designed to enhance the performance of your Twin Rotor® combine. And now is the perfect time to get started on evaluating your maintenance needs before the busy harvest season. Several different viewpoints were factored into the development and design of these performance and maintenance kits including: s)NPUTFROMCUSTOMERSLIKEYOUWHOOWNANDOPERATE.EW(OLLANDCOMBINES s!DVICEFROM.EW(OLLANDDEALERSPRODUCTSUPPORTDEPARTMENTS4HESEPARTS and service specialists have submitted numerous suggestions based on actual experiences in the dealership. Maintenance Kits: Examples include corn head repair kits, cutter bar kits, and rasp bar kits, designed to make a complete repair on a machine. These kits include key components and hardware which help to reduce repeated trips to the dealership for additional pieces needed to complete the repair. Service Packs: These handy carded packs for your shop or toolbox are designed for smaller repairs. Examples include auger fingers and chopper knife kits. These smaller kits still include key parts and attached hardware. Complete Assembly: Knife drive boxes or complete rotors have the latest components and are complete and ready to install. These kits can reduce downtime during the season while upgrading your combine with the latest improvements. While you can install these kits yourself, some kits are best installed by your New Holland dealer, who has the training, experience, and special tools needed to perform the task. Ask your New Holland dealer for an installed price on any of these kits. Your recommendations on new kits for your New Holland combine and header AREALWAYSWELCOME4ALKTOUSANDWELLSUBMITYOURIDEASTO.EW(OLLAND parts marketing.

3

GRAIN PLATFORM KITS

GUARDS The performance and durability are in the superior double heat treating of critical wear surfaces.

2 1

1

2

New Holland employs high industry standards using a special heat-treatment process on the back bar to reduce wear between the guard and the section. New Holland applies an additional inductionhardening process to the ledger areas to provide longer wear-sharp surface for more efficient cutting. These ledger areas are also wider for additional service life.

4ODAYSMACHINESHAVEINCREASEDCUTTINGDEMANDS Made for durability and longer service life, New Holland guards provide top performance in all harvest conditions.

HEAVY-DUTY HEAT TREATED GUARDS GRAIN HEADER GUARDS s+ITSINCLUDEGUARDS HOLDDOWNCLIPS SHIMS ANDHARDWARE s(ANDYSERVICE PACKTOREPAIRTWO FOOTSECTIONSOR 2-pack to repair one-foot sections s+ITSFORSYSTEMS s+ITSWITHDOUBLEHEAT TREATEDGUARDFORLONGERWEAR LIFE and improved toughness

GUARD KITS – 2-PACK - 3" SYSTEM DOUBLE HEAT TREATED GUARD

PART NO.

DESCRIPTION

DESCRIPTION

87442329

END GUARD - 3" SYSTEM

87298212

KIT WITH ADJUSTABLE HOLD DOWN CLIP

87045432

TRIPLE GUARD - 3" SYSTEM

87297170

ADJUSTABLE HOLD DOWN CLIP

87442324

MAIN GUARD - 3" SYSTEM

87015708

MAIN GUARD - 1-1/2" SYSTEM

GUARD KITS – 4-PACK - 3" SYSTEM DOUBLE HEAT TREATED GUARD

87015706

END GUARD - 1-1/2" SYSTEM

PART NO.

9826150

MAIN HOLD DOWN CLIP - 1-1/2" SYSTEM

PART NO.

87298213

4

DESCRIPTION KIT WITH ADJUSTABLE HOLD DOWN CLIP

GRAIN PLATFORM KITS

GENUINE NEW HOLLAND CUTTING PARTS Matched Engineered Components For Superior Performance

BACK HARDENED SECTIONS

DRIVE SHAFT BEARING KIT

The back edge of most New Holland sections are hardened to the same Rockwell hardness as the mating surface of the New Holland guard or wear plate to provide:

Application: 72C and 74C Headers

s3UPERIORDURABILITY s!SSURESANEVENWEARRATEBETWEENTHETWO mating surfaces and eliminates the need for frequent adjustments s)NCREASESSECTIONLONGEVITYATMATINGSURFACES

Part No. 87297938NH

s .EW(OLLANDSECTIONSARE made from high carbon steel with induction-hardened cutting edge for superior wear line s 4HECENTEROFTHE.EW(OLLAND section is very ductile for improved toughness s 4OPSERRATEDSECTIONSARE self-sharpening for a cleaner, smoother cut s 4HEBACKEDGEOFMOST New Holland sections are hardened for superior durability

s(ANDYSERVICEPACK s+ITINCLUDESBEARING FLANGE and mounting hardware

AUGER BEARING KIT DRIVE END Application: 72C and 74C Headers s(ANDY3ERVICE0ACK s+ITINCLUDESBEARING COLLAR flanges, and mounting hardware Part No. 87297943NH

KNIVES PART NO.

DESCRIPTION

86900832

LH 20 FT

72C - 74C

86900833

RH 20 FT

72C - 74C

86900834

LH 25 FT

72C - 74C

86900835

RH 25 FT

72C - 74C

86977981

LH 30 FT

72C - 74C

86977982

RH 30 FT

72C - 74C

SECTIONS PART NO.

DESCRIPTION

APPLICATION

86616529

3" END - RH FINE 14 SER/INCH

72C - 74C

86616528

3" END - LH FINE 14 SER/INCH

72C - 74C

86616527

3" MAIN - FINE 14 SER/INCH

72C - 74C

86616693

3" END - RH COARSE 10 SER/INCH 72C - 74C

86616692

3" END - LH COARSE 10 SER/INCH 72C - 74C

86616689

3" MAIN - COARSE 10 SER/INCH

APPLICATION

72C - 74C

Did You Know? Every component in the cutting system is designed and tested by New Holland engineering and manufactured only by approved suppliers.

5

GRAIN PLATFORM KITS

KITS FOR NEWER STYLE HEADER REELS REEL REPAIR KIT Gather more grain when your 72C and 74C series pick-up reel is in top shape and ready for tough harvest conditions. New reel repair kits offer: s#ONVENIENCEnKEYCOMPONENTS and hardware in one kit s3AVEnTIMEANDMONEY s#ONFIDENCEnYOURREELWILL feed your valuable crop to your combine

Reel Arm Bearing Kit Part No. B95624NH

Reel Arm Bushing Kit Reel Arm Bearing Kit Part No. B95644 - One Side Part No. B95623 - Kit for one spider Part No. B95645 - Two Sides (shown)

CUTTER BAR REBUILD KITS

Application: 72C and 74C Headers

3" System

Kits are available with or without knives. Kits are complete and include: guards, hold-down clips, wear plates, and hardware. Kits may or may not include the knife depending on ordering option. Restore your grain header to “like-new” performance with a complete cutter bar rebuild kit.

6

HEADER SIZE

DRIVE

20' FLEX 25' FLEX 30' FLEX 20' RIGID 25' RIGID 30' RIGID

DOUBLE DOUBLE DOUBLE SINGLE DOUBLE DOUBLE

3" CUTTER BAR KITS TYPE OF HOLD DOWN CLIP MODEL ADJUSTABLE ADJUSTABLE ADJUSTABLE ADJUSTABLE ADJUSTABLE ADJUSTABLE

74C 74C 74C 72C 72C 72C

KIT W/O KNIFE 87297974 87297975 87297976 87297972 87297977 87297978

KIT W/KNIFE 87297979 87297980 87297981 87297973 87297982 87297983

REEL TINE FLAP KIT s)MPROVESCROPFLOWINLIGHTCROPS s+ITINCLUDESNINE FLAPSAND mounting hardware Part No. 86705199

GRAIN PLATFORM KITS

HEADER AUGER FINGERS Now available as a service kit. Includes finger, guide, clip, and hardware.

73C/74C Series Headers

970/971/973 Headers

TINE SERVICE KITS s (ANDYSERVICEKIT s )NCLUDESTINEANDMOUNTINGHARDWARE PART NO.

APPLICATION

SINGLE PIECE NO.

B94712NH

POLY TINE REELS

786031

".(

&5,,4).%n-,2%%,3



".(

&5,,4).%n-,))2%%,3(%!$%2 2001 AND LATER



Part No. B94712NH

Part No. B94710NH

Part No. B96538 - BPINPNL017801 Part No. 87298954 - PINPNL017801 & After

Part No. B96549

Part No. B96539 - BPINPNL017801 Part No. 87298867 - PINPNL017801 & After

Part No. B96551



Part No. B95856NH

CROP DIVIDERS AND ACCESSORIES s #OMPLETE s !SSEMBLED INCLUDES s 0OLYPOINT

HEADER SWEEP KIT Application: 71C, 72C Rigid; 73C, 74C Flex Headers s)MPROVEDFEEDING s+ITINCLUDESSWEEPPLATES and mounting hardware

Part No. B94154NH LH Part No. B94155NH RH

Poly Point Kit

TIME SAVER!

Part No. B95408NH

Part No. B94154NH (shown)

Part No. B95409NH

Tube Kit

Part No. B96651

BULK TINES PART NO.

APPLICATION

SINGLE PIECE NO.

B93866NH

POLY TINE REELS

786031

B93868NH

ML REELS

9842263

B95872NH

MLII REELS

86608231

BULK TINES - 25 PACK PART NO.

APPLICATION

SINGLE PIECE NO.

B95857NH

MLII REELS, 2001 AND LATER

86608231 Twenty-five Pack

Large Bulk Pack

7

GRAIN PLATFORM KITS

HEADER AUGER FINGERS AND KITS The Auger Finger is tougher, stronger, more wear resistant, and now has a roll pin installed to capture the Auger Finger safely in the auger tube. s352&!#%(!2$.%33- The surface hardness is increased to provide more wear life. s#/2%(!2$.%33- The core hardness is increased for improved toughness to better resist breaking or bending. s2/,, 0).2%4!).%2- A roll-pin is positioned between the finger guide and breakpoint to capture any broken finger inside the auger tube. Any broken finger can easily be REMOVEDATTHEOPERATORSCONVENIENCE

STEEL VS. POLY/FIBERGLASS FINGER Steel is harder than Poly/Fiberglass and will provide substantially more wear-life. Tougher, stronger, harder, longer lasting, and with the retainer system the new New Holland steel auger finger is the better choice.

AUGER FINGER COMPLETE REPAIR KIT

).34!,,%$0). 2%!,,!"/23!6%2


DELUXE AUGER FINGER KIT

AUGER FINGER KIT

Part No. B96520 Part No. B96538

Part No. B96539

KIT SELECTION PART NO.

APPLICATION

DESCRIPTION

B96520

73/74C SERIES HEADERS - BPINPNL017801

AUGER FINGER COMPLETE REPAIR KIT

B96538

73/74C SERIES HEADERS - BPINPNL017801

DELUXE AUGER FINGER KIT - ONE FINGER, HUB, GUIDE, AND HARDWARE

B96539

73/74C SERIES HEADERS - BPINPNL017801

AUGER FINGER KIT - TWO FINGERS, GUIDES, AND HARDWARE

87298864

74C SERIES HEADERS - PNL017801 & AFTER

AUGER FINGER COMPLETE REPAIR KIT - 30' HEADER

87298865

74C SERIES HEADERS - PNL017801 & AFTER

AUGER FINGER COMPLETE REPAIR KIT - 25' HEADER

87298866

74C SERIES HEADERS - PNL017801 & AFTER

AUGER FINGER COMPLETE REPAIR KIT - 20' HEADER

87298867

74C SERIES HEADERS - PNL017801 & AFTER

AUGER FINGER KIT - TWO FINGERS, GUIDES, AND HARDWARE

87298954

74C SERIES HEADERS - PNL017801 & AFTER

DELUXE AUGER FINGER KIT - ONE FINGER, HUB, GUIDE, AND HARDWARE

KNIFE DRIVE ASSEMBLY

AUGER FINGER SHAFT BEARING KIT

Application: 71C, 72C, 73C, and 74C Headers

Application: 71C, 72C Rigid; 73, 74 Flex s+ITINCLUDESBEARING FLANGE lock collar, and mounting hardware s(ANDYSERVICEPACKFORSHOP or tool box

s&ORMINIMUMDOWNTIME and new performance choose the complete replacement

8

Part No. 850901

Part No. B96552

GRAIN PLATFORM KITS

GRAIN HEADER KITS CROP DIVIDERS Listed below are divider options for 2010 and 2020 headers. All kits except the crop divider end assemblies include components for both LH and RH dividers.

CROP DIVIDER END ASSEMBLY

CROP DIVIDER - SHORT

s2EPLACEMENTENDFORLONGDIVIDERS s&ULLYASSEMBLEDANDREADYTOINSTALL

s2ECOMMENDEDFORSHORTTO medium standing crops

Part No. B94154NH LH Part No. B94155NH RH

Part No. 801462 - Loop (Old style) (shown) Part No. 87058247 - Short (New style)

CROP DIVIDER - MEDIUM

CROP DIVIDER - LONG

Application: 72C and 74C Headers

Application: 72C and 74C Headers

s2ECOMMENDEDFORMEDIUM to tall standing crops

s2ECOMMENDEDFORTALLERTANGLEDCROPS

Part No. 86634258 Part No. 87058248 - 30' & 35' Headers Part No. 87544032 - 20' & 25' Headers

Part No. 87053603 - 30' & 35' Headers Part No. 87544034 - 20' & 25' Headers

Application: 2010 and 2020 Headers

Shoe Kit

POLY-SKID SHOE KITS FOR FLEX HEADERS Poly-skid shoes improve header performance in wet, sticky soils, and extends the life of the metal shoes in sandy, abrasive soils. +ITINCLUDESMAINSHOES ENDSHOES ANDHARDWARECHECKWITHDEALER FOR3.APPLICATIONS HEADER SIZE

2004 & EARLIER PART NO.

2005 & LATER PART NO.

20'

86556627

87387733

25'

86556628

87387732

30'

86556629

87387731

Individual Shoes Part No. 86541350 (Small) Part No. 86541351 (Large)

9

CORN HEAD KITS

SERVICE PACKS s (ANDYSERVICEPACKS s )NCLUDESHARDWARE s 'ENUINE.EW(OLLANDCOMPONENTS

Drive Sprocket Kit Part No. B95574NH

Idler Sprocket Kit Part No. B95573NH

Divider Point Kit B95575NH - Inner 20/22" rows and all outer rows (shown) B95576NH - Inner wide rows B95577NH - Inner 30" rows

Ear Saver Kit Part No. B95582NH

WEED KNIFE - TWO PIECE DESIGN s&RONTWEEDKNIFEISMADEOFDUCTILECASTIRONFOR improved strength and wear life s2EARWEEDKNIFEISMADEOFHEATTREATEDFORMEDSTEEL s"OTHTHEFRONTANDREARKNIFEKITSINCLUDEKNIVESAND hardware to repair one row

Weed Knife Kit - Front Part No. B95580NH

Weed Knife Kit - Rear Part No. B95581NH

EXTENDA-WEAR™ CHAINS

CORN HEAD REPAIR KIT

Application: Factory equipment on all 96C corn heads

s'ATHERERCHAINS s3PROCKETSANDHARDWARE s0ACKAGED

Standard-duty chains Available for 96C corn heads

Part No. B96154ANH - Kit has chain with standard pins (shown)

s#HROMEPINSFORLONGERSERVICELIFE s7EARSUPTO TIMESLONGERTHANREGULAR DUTYCHAINS

Part No. B96155ANH - Kit has chain with chrome plated pins

Part No. 86978515 (shown) Part No. 86979313

Part No. B96154ANH

10

Part No. 86978515

CORN HEAD KITS

POLY HOODS, DIVIDER KITS, AND COMPLETING KITS FOR 96C AND 98C SERIES CORN HEADS !PPLICATION#AND#SERIESCORNHEADSˆ   AND  s#OLOR MATCHEDHIGH STRENGTHPOLYETHYLENESHELLOVERHEAVY DUTYSTEELFRAME s(IGH STRENGTHPOLYETHYLENESHELLISRESISTANTTOCRACKS DENTS ANDRUSTFOR reduced maintenance s#OMPLETELYASSEMBLEDANDREADYTOINSTALL s)NCLUDESEARSAVER s2EPLACEABLEHEAVY DUTYCASTPOINTTOREDUCEDAMAGETODIVIDERS Hood Assemblies

Divider Assemblies





s" )NNER  s" )NNER s" )NNER  s" /UTER,( !LLROWSPACINGS# s" /UTER2( !LLROWSPACINGS# s /UTER,( !LLROWSPACINGS# s /UTER2( !LLROWSPACINGS#

Outer Divider

s" )NNER  s" )NNER s" )NNER  s" /UTER !LLROWSPACINGS

Poly Hood Repair Kit

Inner Divider

s+ITINCLUDESSTAINLESSSTEELREPAIRPATCHES HARDWARE ANDINSTRUCTIONS s)NSTALLTHESEKITSTOINCREASETHESERVICELIFEOFCORNHEADPOLYHOODS s&OR#AND#.EW(OLLANDCORNHEADS PART NUMBER

DESCRIPTION

87528030E

KIT-INNER ROW*

87528033E

KIT-OUTER ROW

87528034E

6 ROW KIT

87528035E

8 ROW KIT

87528036E

12 ROW KIT

Outer Hood

* Requires two per inner hood

Part No. 87528035E

EAR SAVER/TALL CORN KIT Application: 96C and 98C corn heads

Inner Hood

s+ITINCLUDESCOMPONENTSTOEXTENDTHEHEIGHT of the outer heads/dividers to minimize ear loss in tall corn s#ANBERAISEDTOHARVESTSTANDINGCORNOR lowered to harvest down corn s$ESIGNPERMITSENDDIVIDERSTOFOLD s$ESIGNMINIMIZESHAIRPINNING s(EAVY DUTYCOMPONENTSFORDURABILITYAND longer service life s3MOOTHFRONTTOREARTRANSITION s#OMPLETEINSTALLATIONINSTRUCTIONMANUAL included with each kit Part No. 87034529

11

CORN HEAD KITS/COMBINE KITS

LOWER FEEDER DRUM BEARING KIT - ONE SIDE s(EAVY DUTYBEARING s-OUNTINGHARDWARE s(ANDYSERVICEPACK

Part No. 87297793

ROTOR DIVIDER KIT s)NCLUDES,(CORNER 2(CORNER and center corner dividers s-OUNTINGHARDWARE s(EAVY DUTYORIGINALEQUIPMENTCOMPONENTS

Part No. 87297795 - CR940, CR960 87297796 - CR970

FEEDER DOOR SEAL KIT

FEEDER AND ELEVATOR CHAINS

!PPLICATION#2 #2#OMBINES

Product Selection

s+ITINCLUDESSEALS BRACKETS ANDHARDWARE

Feeder Chains s #2 #2 s #2 Elevator Chains s %LEVATOR 2( s %LEVATOR #ENTER s %LEVATOR ,(

Part No. 87298845

AUGER DRIVE KIT - REDUCED SPEED Application: 96C and 98C corn heads s!UGERSPEEDHASBEENREDUCED TOREDUCETHEAMOUNTOFENERGYAPPLIEDTOEARCONVEYING Reducing auger speed results in fewer ears tossed forward over the auger thus reducing ear loss, shatter loss, and reprocessing loss. Slower auger speed also provides the feeder a better chance of removing the ears from the auger. s4HEAUGERSPEEDIDLERSUPPORTSPINDLEISEASILYADJUSTEDTOOBTAIN the desired amount of chain tension. The tension of both chains is adjusted at the same time to reduce adjustment effort. s4HEAUGERSPEEDREDUCTIONDRIVEINCREASESTHE amount of torque that can be delivered to the auger before the clutch slips. This increases the auger capacity to convey tough heavy bunches of material. Part No. 87503567 — single auger - 8 row Part No. 87503566 — double auger drive - 12 row

12

THRESHING SYSTEM KITS

ROTOR AND ROTOR COMPONENTS COMPLETE ROTOR ASSEMBLY s2EADYTOINSTALL s&ACTORYASSEMBLEDANDBALANCEDFORSMOOTHOPERATION

Part No. 86583343 86583345 86638828 86638827

CR920, CR920, CR970, CR970,

CR940, CR960, CR9040, CR9060 - 17" LH CR940, CR960, CR9040, CR9060 - 17" RH CR9070 - 22" RH CR9070 - 22" LH

ROTOR PADDLE KIT

COMPLETE PADDLE KIT

s+ITINCLUDESTHREE PADDLESANDHARDWARE

s+ITINCLUDESPADDLESANDMOUNTINGHARDWARE

Part No. 87297791

Part No. 87297875

13

THRESHING SYSTEM KITS

ROTOR KITS ROTOR RAMP KIT

FRONT ROTOR DRIVE BEARING KIT

s+ITINCLUDESROTORRAMP SEAL ANGLE AND mounting hardware s(EAVY DUTYORIGINALEQUIPMENTCOMPONENTS

Application: all CR combines

Part No. 87297797 - CR940, CR960, CR9040, CR9060 87297872 - CR970, CR9070

Part No. 87297817

14

s+ITINCLUDESHEAVY DUTYBEARING SEAL ANDHARDWARE

THRESHING SYSTEM KITS

ROTOR KITS PLATE AND LUG KIT ONE ROTOR

PLATE AND LUG KIT BOTH ROTORS

LUG KIT - ROTORS

s+ITINCLUDESLUGSANDHARDWARE to service one rotor s+ITINCLUDESPLATES LUGS ANDMOUNTING s+ITINCLUDESPLATES LUGS ANDMOUNTING hardware to service one rotor hardware to service both rotors s/RIGINALEQUIPMENT.EW(OLLAND components s/RIGINALEQUIPMENT.EW(OLLAND s/RIGINALEQUIPMENT.EW(OLLAND components components s3AVEMONEYANDTIMEWITHTHISKIT s3AVEMONEYANDTIMEWITHTHISKIT

Part No. B96203 LH rotor - CR940, CR960, CR9040, CR9060 B96204 RH rotor - CR940, CR960, CR9040, CR9060 87297780 LH rotor - CR970, CR9070 87297781 RH rotor - CR970, CR9070

PLATE KITS - ROTOR s+ITINCLUDESPLATESANDHARDWARE to service one rotor s/RIGINALEQUIPMENT.EW(OLLAND components

Part No. B96676 LH rotor - CR940, CR960 B96657 RH rotor - CR940, CR960 87297784 LH rotor - CR970, CR9070 87297785 RH rotor - CR970, CR9070

RASP BAR KIT ONE ROTOR

Part No. B96205 - CR940, CR960, CR9040, CR9060 87297870 - CR970, CR9070

Part No. B96658 LH rotor - CR940, CR960, CR9040, CR9060 B96656 RH rotor - CR940, CR960, CR9040, CR9060 87297782 LH rotor - CR970, CR9070 87297783 RH rotor - CR970, CR9070

RASP BAR KIT - TRAILING

RASP BAR KIT - LEADING

s+ITINCLUDESTRAILINGRASPBARSAND hardware to service one rotor s2ASPBARSAREHEAVY DUTY nodular iron and heat treated for longer service life sMETRICBOLTS s/RIGINALEQUIPMENT.EW(OLLAND components

s+ITINCLUDESLEADINGRASPBARS and hardware to service one rotor s2ASPBARSAREHEAVY DUTYNODULAR iron, heat treated, and hard faced for superior wear life sMETRICBOLTS s/RIGINALEQUIPMENT.EW(OLLAND components

Part No. 82797032 LH rotor - CR940, CR960, CR9040, CR9060 82797033 RH rotor - CR940, CR960, CR9040, CR9060

Part No. 87297786 LH rotor - CR970, CR9070 87297787 RH rotor - CR970, CR9070 82797030 LH rotor - CR940, CR960, CR9040, CR9060 82797031 RH rotor - CR940, CR960, CR9040, CR9060

s+ITINCLUDESBOTHLEADINGANDTRAILING RASP BAR KIT rasp bars to service one rotor BOTH ROTORS sMETRICHARDWARE s+ITINCLUDESBOTHLEADINGAND trailing rasp bars to service s/RIGINALEQUIPMENT.EW(OLLAND both LH and RH rotor— components CR9040, CR9060 s+ITINCLUDESLEADINGBARSTOSERVICE both LH and RH rotor—CR9070 sMETRICHARDWARE s/RIGINALEQUIPMENT.EW(OLLAND components Part No. 82797034 LH rotor - CR940, CR960, CR9040, CR9060 82797035 RH rotor - CR940, CR960, CR9040, CR9060

Rasp bars are shipped unpainted to meet torque specifications.

Part No. B96206 both RH and LH rotors CR940, CR960, CR9040, CR9060 Part No. 87297788 both RH and LH rotors CR970, CR9070 (Leading bars only)

15

COMBINE KITS

RASP BAR KITS LEADING RASP BAR KIT

LEADING RASP BAR KIT

Application: CR940, CR9040, CR960, CR9060

Application: CR970, CR9070

s3ETOFBARS s4HREESETSREQUIRED

s3ETOFBARS s4HREESETSREQUIRED

Part No. 86503255 LH - CR940, CR960, CR9040, CR9060 (shown) 86503256 RH - CR940, CR960, CR9040, CR9060

Part No. 84050519 LH - CR970, CR9070 84050520 RH - CR970, CR9070 (shown)

TRAILING RASP BAR KIT

TRAILING RASP BAR KIT

s3ETOFBARS s4HREESETSREQUIRED

s3ETOFBARS s4HREESETSREQUIRED

Part No. 9800347 LH (shown) 9800346 RH

Part No. 84060998 LH 84060997 RH (shown)



16

s!LL.EW(OLLANDRASPBARKITSINCLUDEHEAVY DUTYHEATTREATEDNODULARIRONRASPBARSANDMETRICBOLTS s!LLSETSAREWEIGHTSORTEDTOMAXIMIZETHEBALANCEANDPERFORMANCEOF.EW(OLLANDROTORS s,EADINGRASPBARSAREHARDSURFACEDFORLONGERWEAR s/RIGINALEQUIPMENT.EW(OLLANDCOMPONENTS

COMBINE KITS

CLEANING SYSTEM KITS SIEVE SELECTION

Part No. 84084325 - Lower 1-1/8" CR940, CR960 (shown) 84084326 - Lower 1-1/8" - CR970

SHAKER SHOE BUSHING KIT Application: all CR combines s/RIGINALEQUIPMENTBUSHINGS s(ANDYSERVICEPACK

Part No. 87297802

Part No.

Description

Application

87109815 87109817 87109819 87109821 87109824 87109826 84084985 84084984 84084982 84084981 84084662 87109834 84084323 84084324 84084325 84084326 742134 742135        

Pre-sieve 1-1/8" Adjustable Pre-sieve 1-1/8" Adjustable Pre-sieve 1-5/8" Adjustable Pre-sieve 1-5/8" Adjustable Pre-sieve 1-5/8" Closz Slat Adjustable Pre-sieve 1-5/8" Closz Slat Adjustable Upper Sieve 1-1/8" Adjustable Upper Sieve 1-1/8" Adjustable Peterson Sieve 1-1/8" Adjustable Peterson Sieve 1-1/8" Adjustable Upper Sieve 1-5/8" Corn Slat Adjustable Upper Sieve 1-5/8" Corn Slat Adjustable Upper Sieve 1-5/8" Closz Slat Adjustable Upper Sieve 1-5/8" Closz Slat Adjustable Lower Sieve 1-1/8" Adjustable Lower Sieve 1-1/8" Adjustable Round Hole Sieve Frame Round Hole Sieve Frame 2OUND(OLE3IEVE!SSEMBLYDIAMETERMM 2OUND(OLE3IEVE!SSEMBLYDIAMETERMM 2OUND(OLE3IEVE!SSEMBLYDIAMETERMM 2OUND(OLE3IEVE!SSEMBLYDIAMETERMM 2OUND(OLE3IEVE!SSEMBLYDIAMETERMM 2OUND(OLE3IEVE!SSEMBLYDIAMETERMM 2OUND(OLE3IEVE!SSEMBLYDIAMETERMM 2OUND(OLE3IEVE!SSEMBLYDIAMETERMM

CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 #2 #2 #2 #2 #2 #2 #2 #2 #2 #2 #2 #2

DELUXE SHAKER SHOE BUSHING KIT

FRONT SHAKER SHOE BUSHING KIT

DELUXE FRONT SHAKER SHOE BUSHING KIT

Application: all CR combines

Application: all CR combines

Application: all CR combines

s+ITINCLUDESBUSHINGS HOUSING and hardware s(ANDYSERVICEPACK

s)NCLUDESBUSHINGSANDHARDWARE s(ANDYSERVICEPACKS

s)NCLUDESBUSHINGSANDHARDWARE s(ANDYSERVICEPACKS

Part No. 87297803

Part No. 87297804

Part No. 87297806

17

COMBINE KITS

GRAIN HANDLING KITS UNLOADING AUGER BEARING KIT

GRAIN TANK AUGER BEARING KIT

Application: all CR combines

Application: all CR combines

s+ITINCLUDESBEARING FLANGESANDHARDWARE s(ANDYSERVICEPACK

s#OMPONENTSFORONEAUGER s+ITINCLUDESBEARING FLANGEANDHARDWARE

Part No. 87297808

Part No. 87297809 RH Part No. 87297810 LH

BUBBLE-UP AUGER-TOP

BUBBLE-UP AUGER DELUXE KIT

Application: all CR combines

Application: all CR combines

s+ITINCLUDESBEARING FLANGESANDHARDWARE s(ANDYSERVICEPACK

s+ITINCLUDESBEARINGS FLANGESANDHARDWARE

Part No. 87297811

Part No. 87297812

TAILINGS ELEVATOR BOTTOM AUGER BEARING KIT Application: CR970, CR9070

Application: CR940, CR960, CR9040, CR9060

s+ITINCLUDESBEARINGSANDFLANGES s(ANDYSERVICEPACK

s+ITINCLUDESBEARINGSANDFLANGES s(ANDYSERVICEPACK

18

Part No. 87297800

Part No. 87297801

COMBINE KITS

GRAIN HANDLING KITS TAILINGS AUGER PADDLE KIT Application: all CR combines s+ITINCLUDESTWOPADDLESANDMOUNTINGHARDWARE s/RIGINALEQUIPMENT.(COMPONENTS

TAILINGS ELEVATOR DRIVE BEARING KIT Application: all CR combines s(ANDYSERVICEPACKINCLUDESBEARINGSANDHARDWARE s2(OR,($RIVE

Part No. 87297819 RH Part No. 87297820 LH

Part No. 87297874

TAILINGS ELEVATOR GEAR BOX BEARING KIT

TAILINGS ELEVATOR DRIVE KIT LH AND RH

Application: all CR combines

Application: all CR combines

s+ITINCLUDESSEALS BEARINGS SNAPRINGSANDHARDWARE s(ANDYSERVICEPACK

s+ITINCLUDESBEARINGS SEALS GEARSANDHARDWARE

Part No. 87297873

Part No. 87297798

TAILINGS ELEVATOR UPPER BEARING KIT Application: all CR combines s(ANDYSERVICEPACKINCLUDESBEARINGS flanges and hardware

Part No. 87297799

19

COMBINE KITS

CROP RESIDUE MANAGEMENT KITS ROTATING CHOPPER KNIFE KIT - COMPLETE s #OMPLETESETOFKNIVESANDMOUNTINGHARDWARE  FOR#2 #2ANDFOR#2 #2 s +NIVESANDHARDWARETOSERVICEONECHOPPERKNIFE s +NIVESAREMANUFACTUREDFROMHIGH STRENGTHSTEEL and heat treated for superior wear life s +NIVESHAVEABEVELED SERRATEDCUTTINGEDGEFOR maximum performance Part No. 87298862 - CR940, CR960, CR9040, CR9060 combines Part No. 87298863 - CR970, CR9070 combines

CHOPPER KNIFE FEATURES Beveled edge to self sharpen with wear.

Special heat treated alloy steel for maximum toughness and superior wear life.

Serrated teeth for gripping and chopping residue.

ROTATING CHOPPER KNIFE KIT - 4 PACK

FIXED KNIFE KIT

s &OURKNIVESANDMOUNTINGHARDWARE s +NIVESAREBALANCEDFORSMOOTHOPERATION s +NIVESAREMANUFACTUREDFROMHIGH STRENGTH steel and heat treated for superior wear life s +NIVESHAVEABEVELED SERRATEDCUTTINGEDGE for maximum performance s &OR#2 #2 #2COMBINES s $ELUXEPACK 

s #OMPLETESETOFKNIVESFORFIXEDCHOPPERBAR 0ART.OKNIVES FOR#2 CR9040, CR960, CR9060 combines 0ART.OKNIVES FOR CR970, CR9070 combines s &OURPACKKIT - Part No. 87298858 Part No. 87298861

20



COMBINE KITS

COMBINE LIGHTING KITS

HID LIGHT KIT s()$LAMPASSEMBLY WIREHARNESS BALLAST hardware, and installation instructions s4HISKITWILLADD()$LIGHTINGTO#2COMBINES Part No. 84084476

DELUXE SERVICE LIGHT KIT s4HISKITWILLHELPTHEOPERATORORSERVICEPERSONNEL when extra lighting is required s4HEWORKLIGHTSAREPOSITIONEDTOILLUMINATETHE concave section of the rotor, belt, and pulley areas of the combine s4WOSWITCHESCONTROLFIVE LAMPS Part No. 84084608

LIGHT KIT

THREE BEACON LIGHT KIT

s(ANDYSERVICELIGHT s-AGNETICMOUNT sgCORD

s4HISKITWILLADDTWOROTATINGBEACONSATTHETOPOF the cab and one to the rear of the CR combine s+ITINCLUDESBEACONLIGHTS BRACKETS AND mounting hardware

Part No. 84059809

Part No. 84081944

21

COMBINE KITS

NEW HOLLAND “VOYAGER” OBSERVATION SYSTEMS SINGLE CAMERA 7" COLOR FLAT SCREEN LCD MONITOR OBSERVATION SYSTEM Features s#OMPLETECOLOROBSERVATIONSYSTEM NOTHINGELSEREQUIRED s)NCLUDESFLAT PANEL,#$COLORMONITOR s-ONITORHASBUILTINSPEAKER VOLUME CONTRAST AND camera 1, 2, or 3 selector s 6OLTNEGATIVEGROUNDUSEWITH0ART.O:!%#% FOR 6OLTELECTRICALSYSTEMS

POWERLUBER® CORDLESS RECHARGEABLE GREASE GUN— LUBRICATES ANYTHING, ANYTIME, ANYWHERE. TWO MODELS–12-VOLT AND 14.4-VOLT FOR MOST LUBRICATING APPLICATIONS.

Part No. 87298560 - 14.4-Volt Power Luber (shown)

The new, heavy-duty 14.4 PowerLuber gives you the power to lubricate just about anything, anytime, anywhere.

Part No. ZAEVOSHDCL1B

Dual Camera 7" Color Flat Screen LCD Observation 3YSTEMn0ART.O:!%6/3($#," High Resolution 1/3" CCD Color Camera Part No. ZAEVCCS130B Zero Lux-Night Visions 1/3" CCD Color Camera Part No. ZAEVCCS130XB

s4WO SPEEDSWITCHFORHIGH PRESSUREOR high-volume delivery s#YCLEINDICATORPINTOMONITORGREASEOUTPUT s!hSMARTvCHARGINGSYSTEMDELIVERSRELIABLEPOWER All the features you need, including comfortable grip, balanced design, hook for shoulder strap, built-in hose and coupler holder, and slim, compact carrying case.

!DD ONg#AMERA#ABLEn0ART.O:!%#%# Dual-Camera Capable Quick-Disconnect Bulkhead 4RACTOR4RAILER #ABLEn0ART.O:!%6/3"(# Replacement 4" LCD Monitor Mounting Pedestal Part No. ZAE4PANA

CHAIN BREAKERS s#HAIN"REAKER   CHAINn2.( s#HAIN"REAKER   CHAINn2.( s#HAIN"REAKER  CHAINn.(

Part No.

Description

87298560 87298561 87298562 87298563 B95785S B95786S B95787 B96508 B95788 "

14.4-Volt PowerLuber, one battery 14.4-Volt PowerLuber, two batteries 14.4-Volt Battery 14.4-Volt Quick Charger 12-Volt PowerLuber, one battery 12-Volt PowerLuber, two batteries 12-Volt Charger 12-Volt Field Charger 12-Volt Battery &LEX 7HIPHOSEn 6OLTAND 6OLT

B96092 Auto-Lube Filler Gun

Part No. 87297876

s5SESTANDARDOZGROOVETUBE s#ANDISCHARGECOMPLETETUBEINTORESERVOIRINSECONDS s%CONOMICALTOOLFORFILLINGRESERVOIRSON,INCOLN auto-lube grease systems

Application: for all CR combines

22

s2UBBERLATCHKIT s )NCLUDESLATCHKIT and hardware

Part No. B96092 (shown) Part No. B96513 - grease gun holder

PERFORMANCE KITS

TRACTION/PLATFORM KITS/THRESHING AND SEPARATING AXLE EXTENSION KIT

Part No. 84095955 84095960 84095965 84095956 84095959 84095961 84095964 84095966 84095969 *CR940 - CR960 **CR970

-

12" for HD 11/111 (shown)* 10" for HD 11/111* 6" for HD 11/111 12" for planetary* 12" for planetary** 10" for planetary* 10" for planetary** 6" for planetary* 6" for planetary**

PRE-SIEVE

Part No. 87109815 87109817 87109819 87109821 87109824 87109826

-

1-1/8" 1-1/8" 1-5/8" 1-5/8" 1-5/8" 1-5/8"

Adjustable - CR940, CR960 Adjustable - CR970 Adjustable - CR940, CR960 Adjustable - CR970 Closz - CR940, CR960 Closz - CR970 (shown)

WHEEL WEIGHT KIT Part No. 84050430 - 400 KG (shown) 84050431 - 200 KG 84050432 - 600 KG

LOWER SIEVE-ADJUSTABLE

PLATFORM EXTENSION KIT

Part No. 84084325 - Lower 1-1/8" - CR940, CR960 (shown) 84084326 - Lower 1-1/8" - CR970 For S/N HAJ100799 and below Part No. 84084759 - 10" 84084760 - 20" 84084761 - 30" For S/N HAJ100800 and above Part No. 84083686 - 10" 84083687 - 20" 84083688 - 30"

23

PERFORMANCE KITS

THRESHING SYSTEM KITS CORN CONVERSION KIT

CONCAVE AWNING PLATES

s+ITINCLUDESROUNDBARCONCAVES  CLOSZ pre-sieve, 1-5/8" corn slat upper sieve, and 1-5/8" closz slat lower sieve Part No. 84083296 - CR940, CR960 Part No. 84083297 - CR970

Part No. 84083486 - CR940, CR960 (shown) 84083487 - CR970

ROUND BAR CONCAVES

CONCAVE KIT WITH WIRES INSTALLED s(EAVY DUTYWELDEDFRAME s%NGINEEREDTOMAXIMIZETHEPERFORMANCEONTHE CR combines s+ITINCLUDESCONCAVE EXTENSIONWITHWIREINSTALLED for labor savings during critical harvest season s/RIGINALEQUIPMENTCOMPONENTS

Part No. 84060996 - CR940, CR960 (shown) 84060995 - CR970

Universal Concave Kits Part No. 87298838 - CR940, CR960 Part No. 87298839 - CR970 Small Grain Concaves with wires installed Part No. 87298837 - CR940, CR960 Part No. 87298836 - CR970

24

PERFORMANCE KITS

THRESHING AND SEPARATING AGITATOR THRESHING PINS

SEPARATOR FINS CORN WEDGE KIT

Part No. 9845842 (1.5") - CR940, CR960 84050517 (1.5") - CR970 (shown) 9845843 (2.25") - CR940, CR960 84050518 (2.25") - CR970

Part No. 87034017

SMOOTH RASP BAR KIT

BEATER GRATE COVER PLATE

s2ECOMMENDEDFORSPECIALTYCROPS

Part No. 86512697 84060205 86512698 84060206

LH - CR940, CR960 LH - CR970 RH - CR940, CR960 RH - CR970

SEPARATOR GRATES

S/N HAJ103301 & Above Part No. 87333877 - CR940, CR960 87333878 - CR970 (shown)

BEATER GRATE COVER PLATE s2ECOMMENDEDFORSOYBEANSANDMOST corn varieties s0ROVIDESASMOOTHSURFACEFORCROPTOPASSOVER

Round Bar Separator Grates Part No. 87012800 - CR940, CR960 (shown) 86974251 - CR970 Slotted Separator Grates Part No. 84081104 - CR940, CR960 84081105 - CR970 Part No. 84081288 - CR940, CR960 (shown) 84081289 - CR970

25

PERFORMANCE KITS

GRAIN HANDLING KITS/RESIDUE HANDLING PERFORATED CROSS AUGER AND ELEVATOR COVER KIT

UNLOADING AUGER 3´ EXTENSION KIT

Part No. 84081342 - Round Holes - All CR’s (shown) 84060218 - Slotted Holes - All CR’s

Part No. 87280553

STAINLESS GRAIN TANK CROSS AUGER TROUGH LINER KIT

ROLLER ASSIST KIT FOR STANDARD STRAW CHOPPER s+ITWILLADDHYDRAULICALLYDRIVENFEEDASSISTROLLERTO a chopper

Part No. 87662994

Part No. 87011814 - CR940, CR960 87011815 - CR970

STRAW CHOPPER SLOW DOWN KIT

SPREAD ENHANCING CHOPPER KIT

s2EQUIREDPROCESSINGCORNRESIDUETHROUGHTHE straw chopper s+ITINCLUDESBELTPULLEY SHIELD ANDHARDWARE

s3ETOF  CURVED knives designed to enhance residue spreading s+ITINCLUDESCURVEDKNIVESANDHARDWARE

26

Part No. 84083685

Part No. 87031706 - CR940, CR960 (shown) 87031711 - CR970

PERFORMANCE KITS

ACCESSORIES WINDSHIELD WASHER KIT

FIRE EXTINGUISHER KIT

Application: all CR combines

s+ITINCLUDESEXTINGUISHERANDBRACKET

s+ITINCLUDESPUMP RESERVOIR HOSES HARNESS and mounting brackets

Part No. 84084758 - S/N HAJ100801 and above Part No. 84084936

COOLANT HEATER KIT

THREE WAY PLUG

s+ITINCLUDESHEATINGELEMENTANDCORD

s0ROVIDESUPTOADDITIONALOUTLETS

Part No. 84081389 - CR940 84081390 - CR960 84081496 - CR970 (shown)

Part No. 87298119 (shown left) 87298121 - Plug-in (shown right)

HOOK KIT FOR SIDE SHIELDS

LATCH KIT

Application: all CR Combines s(ANDYSERVICEPACK

Application: all CR Combines s(ANDYSERVICEPACK

Part No. 87297854NH Standard (shown) Part No. 87297853NH Deluxe

Part No. 87297882

27

DEALER INSTALLED KITS

PART NO. 84060212

87329421 84461772 84073833 84050611 84081263

Feeder Lift Cylinders Kit 2.75 in. (70 mm) Required with 36 ft. platform head and 12-row corn head. Note: When upgrading a CR960/970 to the heavy-duty lift kit, order (1) of Part No. 87031096 3 in. (75 mm) hydraulic lift cylinder and install on the right-hand side of feeder. (3 in. cylinder must be installed on right-hand side to allow for operation of safety stop.) Feeder front drum stop kit. Recommended for stony conditions. Terrain Tracer™ Kit (for CR940/960 small grain combines less Terrain Tracer option) Perforated Feeder Floor Variable Speed Feeder Kit Variable Speed Feeder Kit

86512697 86512698 712447002 9512490 86528973 84060988 84060985 87012800 86974251 84434370 84434371 84081526 84081646

Threshing & Separating Corn Conversion Kit (includes round bar concaves, 1-5/8 in. closz slat pre-sieve, 1-5/8 in. corn slat upper sieve, 1-5/8 in. closz slat lower sieve) Corn Conversion Kit (includes round bar concaves, 1-5/8 in. closz slat pre-sieve, 1-5/8 in. corn slat upper sieve, 1-5/8 in. closz slat lower sieve agitator pins for separator area) Small Grain Concaves Small Grain Concaves Round Bar Concaves Round Bar Concaves Universal Concaves Universal Concaves Concave Awning Plates (2 plates per concave, 4 plates per kit) Concave Awning Plates (2 plates per concave, 4 plates per kit) Concave Spacer Kit (for use with C&B, universal concave) Concave Installation Kit Concave Installation Kit Agitator Pins, threshing 1.5 in. (set of 2) 12 sets required Agitator Pins, separating 1.5 in. (set of 2) 10 sets required Agitator Pins, separating 2.25 in. (set of 2) 10 sets required Agitator Pins, separating 1.5 in. (set of 3) 12 sets required Separator Fins Corn Wedge Kits (includes 9 left and 9 right wedges. 1 kit for CR940/960. Up to 3 kits for CR970.) Smooth Raspbar (set of 2) left-hand Smooth Raspbar (set of 2) right-hand Smooth Raspbar (set of 3) right-hand Crop Thinning Blade Crop Thinning Blade Stainless Steel Rotor Covers with left and right center beam wear plates. Stainless Rotor Covers with left and right center beam wear plates. Round Bar Separator Grates (set of 2) Round Bar Separator Grates (set of 2) Slotted Separator Grates (set of 2) Slotted Separator Grates (set of 2) Additional Separator Grate above concave extensions (set of 2) Slotted Covers to install over bar and wire separator grates (sunflower kit)

84060079 84050397 84084813 84084814 87109815 87109817 87109819 87109821 87109824 87109826 84084985

Cleaning Self-leveling Fan Bottom Shields Self-leveling Fan Bottom Shields Remote Upper and Lower Sieve Adjustment Remote Upper and Lower Sieve Adjustment Pre-sieve 1-1/8 in. Adjustable Pre-sieve 1-1/8 in. Adjustable Pre-sieve 1-5/8 in. Adjustable Pre-sieve 1-5/8 in. Adjustable Pre-sieve 1-5/8 in. Closz Slat Adjustable Pre-sieve 1-5/8 in. Closz Slat Adjustable Upper Sieve 1-1/8 in. Adjustable

84083296 84083297 87665910 87565749 84060996 87565755 87665949 87565747 84083486 84083487 208956 86581143 87340793 9845842 9845842 9845843 84050517 87034017

28

DESCRIPTION

APPLICATION

CR940-CR970

CR940-CR970 CR940-CR970 CR970 CR940-CR960 CR970

CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR970 CR940-CR960 CR970 CR940-CR960 CR940-CR960 CR940-CR960 CR970 CR940-CR970 CR940-CR960 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR960 CR970

CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960

DEALER INSTALLED KITS

PART NO.

DESCRIPTION

742134 742135 84084506 84084507 9560145 9560147 84084510 84084511 84081019 84067682

Cleaning (continued) Upper Sieve 1-1/8 in. Adjustable Peterson Sieve 1-1/8 in. Adjustable Peterson Sieve 1-1/8 in. Adjustable Upper Sieve 1-5/8 in. Corn Slat Adjustable Upper Sieve 1-5/8 in. Corn Slat Adjustable Upper Sieve 1-5/8 in. Closz Slat Adjustable Upper Sieve 1-5/8 in. Closz Slat Adjustable Lower Sieve 1-1/8 in. Adjustable Lower Sieve 1-1/8 in. Adjustable Lower Sieve 1-5/8 in. Closz Slat Adjustable* Lower Sieve 1-5/8 in. Closz Slat Adjustable* *To install a 1-5/8 in. corn slat sieve in lower sieve position, use 84084662 (CR940/960) and 84084644 (CR970) upper corn slat sieve. Requires removing the rake assembly bolted to the rear of the sieve. Round Hole Sieve Frame Round Hole Sieve Frame Round Hole Sieve Assembly .10 diameter (2.5 mm) Round Hole Sieve Assembly .10 diameter (2.5 mm) Round Hole Sieve Assembly .16 diameter (4.0 mm) Round Hole Sieve Assembly .16 diameter (4.0 mm) Round Hole Sieve Assembly .39 diameter (10 mm) Round Hole Sieve Assembly .39 diameter (10 mm) Cleaning Fan Low Speed Kit - self-leveling Roto Thresh Covers - smooth

84081342 84060218 87280553 87662994

Grain Handling Perforated Cross Auger and Elevator Covers (Round holes) Perforated Cross Auger and Elevator Covers (Slotted holes) Unloading Auger 3 ft. extension Stainless steel grain tank cross auger through service liner

84084984 84084982 84084981 84084662 87109834 84084323 84084324 84084325 84084326 87109848 87109850

84095819

87011814 87011815 87047029 87047030 87031706 87031711 84083685

87284735 84081381 84081168 84112241 84081747 87282475

Residue Handling Remote Straw Chopper Deflectors (not recommended when running corn residue through straw chopper) When used on SN HAJ103301 and above, the following parts are required to complete kit: CR940/960: (16) 84438530 Bushing, (1) 84438507 Top Hat Section, (2) 84438512 Slider CR970: (16) 84438530 Bushing, (1) 84438615 Top Hat Section, (2) 84438617 Slider Hydraulic Driven Feed Assist Roll Kit for standard chopper Hydraulic Driven Feed Assist Roll Kit for standard chopper Deluxe Straw Chopper Kit (converts standard chopper to deluxe) Deluxe Straw Chopper Kit (converts standard chopper to deluxe) Spread Enhancing Knife Kit (includes 28 paddle knives, bolts, and lock nuts). Recommended when cut width is 36 ft. or greater. Spread Enhancing Knife Kit (includes 32 paddle knives, bolts, and lock nuts). Recommended when cut width is 36 ft. or greater. Straw Chopper Slow Down Kit (required when running corn residue through the straw chopper). Standard on 2005 and newer corn and soybean combines. Precision Farming IntelliView™ Plus Touch Screen Display Kit. Includes Monitor with Data Logger, monitor mounting kit and 128 MB compact flash card with PCMCIA adapter for data logging. Moisture Sensor (requires CCM3) Yield Sensor. For CR Combine S/N HAJ100799 and below. Requires Moisture Sensor and CCM3. Yield Sensor. For CR combines S/N HAJ100800 and above. Requires Moisture Sensor and CCM3. Yield Logging. Includes Data Logger and 128 MB compact flash card with PCMCIA adapter for data logging. Requires yield sensor, moisture sensor, PC desktop software, and CCM3. NH100 DGPS Receiver Installation Kit. Required when installing NH100 DGPS receiver.

APPLICATION CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970

CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR970 CR940-CR970

CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970

CR940-CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR960 CR970 CR940-CR970

CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970

29

DEALER INSTALLED KITS PART NO.

DESCRIPTION

APPLICATION

84095875 87350861

Precision Farming (continued) In-Cab Printer Software for Precision Farming

CR940-CR970 CR940-CR970

84060286 84095955 84095960 84095965 84095956 84095959 84095961 84095964 84095966 84095969 84084759 84084760 84084761 84083686 84083687 84083688 84050430 84050431 84050432 84081527 84110799

Traction Drive Wheel Spacers - 4 in. (102 mm) Axle Extension - 12 in. (316 mm) for HD11/111 Axle Extension - 10 in. (265 mm) for HD11/111 Axle Extension - 6 in. (138 mm) for HD11/111 Axle Extension - 12 in. (316 mm) for Planetary Axle Extension - 12 in. (316 mm) for Planetary Axle Extension - 10 in. (265 mm) for Planetary Axle Extension - 10 in. (265 mm) for Planetary Axle Extension - 6 in. (138 mm) for Planetary Axle Extension - 6 in. (138 mm) for Planetary For Serial No. HAJ100799 and below Platform Extension - 10 in. (250 mm) Platform Extension - 20 in. (500 mm) Platform Extension - 30 in. (750 mm) For Serial No. HAJ100800 and above Platform Extension - 10 in. (250 mm) Platform Extension - 20 in. (500 mm) Platform Extension - 30 in. (750 mm) Wheel Weights (400 kg) Wheel Weights (200 kg) Wheel Weights (600 kg) Outer Fender Kit Two-speed Powered Rear Axle Kit (offers higher speed with lower torque/lower speed with higher torque. This kit provides parts to add two-speed function to existing powered rear axle.

CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970

CR940-CR970

84084765 84081944 84081054 84084608

Lighting Center Row Finder Light Beacons (2 front and 1 rear lights) Hand-held Service Light Under Shield Light Kit (includes: (4) under shield and (1) engine desk service lights)

CR940-CR970 CR940-CR970 CR940-CR970 CR940-CR970

84060302 84081512 84060303 84081389 84081390 84081496 84040942

Engine Onboard Air Compressor/Tank/Wand Onboard Air Compressor/Tank/Wand Onboard Air Compressor/Tank/Wand Coolant Heater Kit Coolant Heater Kit Coolant Heater Kit Rotary Screen Dust Brush (for use in extreme dusty conditions, i.e. corn and soybeans)

CR940 CR960 CR970 CR940 CR960 CR970 CR940-CR960

84084936 84083664 87297435

Miscellaneous Fire Extinguisher CCM3 (required for Precision Farming, Remote Sieves, and Remote Deflectors) *Quicklub® Automated Lubrication System (check with Parts Marketing for more details)

CR940-CR970 CR940-CR970 CR940-CR970

*Quicklub is a registered trademark of Lincoln Industrial Corp.

30

CR940-CR970 CR940-CR960 CR940-CR960 CR940-CR960 CR940-CR960 CR940-CR970 CR940-CR960 CR970 CR940-CR960 CR970

RELATED HARVESTING PARTS

MOISTURE TESTERS - GRAIN MT-16 Grain Moisture Tester (supersedes model MT3)

s2EPEATABILITYINNORMALRANGEOFSTORED GRAINWITHINOFAIR OVENSTANDARD Higher-frequency, capacitive circuit improves accuracy. s)NCLUDESSTURDYCARRYINGCASEWITHSTRAP sYEARWARRANTYIN.ORTH!MERICAAND 1 year overseas

Features s$IRECTREADOUTFORGRAINS"ARLEY #ANOLA #ORN &LAX /ATS 2ICE 2YE 3ORGHUM 3OYBEANS 3UNFLOWER AND7HEAT s%ACHSCALECANBEADJUSTEDTOMATCH local elevator s!UTOMATICALLYAVERAGESUPTOTESTRESULTS

MT-PRO™ Multi-Grain, Multi-Language, Grain Moisture Tester

Part No. B96649NH

Features

Specifications

sGRAINSCALES s)NFORMATIONDISPLAYSINLANGUAGES English, French, German, Spanish, Portuguese, Italian, and Swedish s-ULTI 0OINT™ adjustable calibration s!VERAGINGCAPABILITYDISPLAYSRUNNING average of tests s"ACKLIGHTEDDISPLAY s(IGHER FREQUENCY CAPACITIVECIRCUIT improves accuracy s%NHANCEDTEMPERATURECOMPENSATIONCIRCUIT s/PTIONALCARRYINGCASE 0ART.O

s/PERATING2ANGE-OISTURE TO depending on grain tested s/PERATING2ANGE4EMPERATURE ªnª& ªnª# s2EPEATABILITY INNORMALMOISTURE range for stored grain s!CCURACY INNORMALMOISTURE range for stored grain s$ISPLAY2ESOLUTIONMOISTURE sYEARWARRANTYIN.ORTH!MERICAAND 1 year overseas

MOISTUREMATCH

™

Grain Tester

Features

DJ GAC 2000 SERIES MOTOMCO 919 MOTOMCO 919E LABTRONICS INDUSTRY STANDARD

Part No. B96650NH

sLarge Graphic LCD shows multiple readouts and on-line instructions. Backlit for night use. sAveraging Capability displays the last six test results and running average of tests. Individual results can be deleted. s33 Grain Scales s-/)3452%Match Technology - User selects from one of five options: Motomco 919, Motomco 919E, DICKEY-john GAC 2000, ,ABTRONIC#ANADA OR)NDUSTRY3TANDARD sCompaction Sensor Technology displays moisture automatically when optimum grain compaction threshold is reached sGraphic Calibration Adjustment™ allows user to fine-tune calibration to “match” a specific commercial tester. Calibration adjustments shown on graphic display. sOptimal Test Cell Geometry for more accurate and repetitive results sLarger Test Cell for more representative sample sEZ-Fill Grain Scoop makes filling test cell quick and clean. Stores inside test cell between uses.

Part No. FM20400DS

sMolded Hand Grip for safe and comfortable operation sComputer Interface for updating moisture scales and software upgrades. RS 232 serial port uses standard computer serial CABLENOTINCLUDED  sOptional Carrying Case Part No. FM20101DS

Specifications s/PERATING2ANGE-OISTURE TO depending on grain tested s/PERATING2ANGE4EMPERATURE ªnª& ªnª# s2EPEATABILITY INNORMALMOISTURE range for stored grain s!CCURACY INNORMALMOISTURE range for stored grain s$ISPLAY2ESOLUTIONMOISTURE sYEARWARRANTYIN.ORTH!MERICAAND 31 1 year overseas

RELATED HARVESTING PARTS

AUTOMATED LUBRICATION SYSTEM Are you tired of climbing over and under your CR Combine, removing guards and looking for difficult to find grease zerks? Quicklub® will help you eliminate this as well as increase your productivity.

Part Number

Description

Application

87297435 B96092

Automated Lubrication System Quick Fill Grease Gun

CR Combines New Holland Automated Lube Systems

WHY IS AN AUTOMATED LUBRICATION SYSTEM BETTER? Manual Lubrication

Automated Lubrication

Inconsistent lubrication

Constant Lubrication

Can’t lubricate while running

Lubricate while machine runs

Constant contamination

vs.

Premature bearing wear

Extended bearing life

Labor expense

Less downtime

Safety issue

Quick payback on your investment

Completely reliable and fully automatic, this system is designed to increase the component life of the forage harvester while minimizing downtime and reducing labor costs related to the traditional method of manual lubrication. This system has been tested by New Holland in the field without failure. With an automated lubrication system, small amounts of grease are constantly provided to the components while in operation, maintaining a grease seal to block contaminants from the lubricated area.

32

Closed system – no contamination

Lincoln has been the system of choice for many types of agricultural equipment including the New Holland Big Square Balers, and is now available on forage harvesters. This kit automatically lubricates 33 lube points, which frees the operator to harvest more acres a day. The complete kit can be installed in approximately 12 hours. It comes with complete and detailed instructions, mounting hardware, and fittings required for the installation.

GRAIN ANALYZER

MOISTURE-MAX & MOISTURE-MAX PLUS 4HE7ORLDS-OST!CCURATE(ANDHELD'RAIN-OISTURE!NALYZER The New Holland Moisture-Max and Moisture-Max plus grain moisture analyzers are the first handhelds with “grain trade” accuracy.

Part No. 87299139 New Holland Moisture-Max

Two versions are available: s-OISTURE -AX FORHIGHLYACCURATEMOISTURETESTING0ART.O s-OISTURE -AXplus - the ONLY handheld moisture tester that measures accurate test weight. Part No. 87299140

Part No. 87299140 New Holland Moisture-Max plus

5SING53&EDERAL3TANDARD4ECHNOLOGY $)#+%9 JOHNSTECHNOLOGYINTHE-OISTURE -AXAND-OISTURE -AXplus is based on the GAC2100b, the U.S. federal grain standard.

5NSURPASSED"ENEFITSFOR&ARMING 7HETHERYOUREHARVESTING STORINGORTRADINGGRAIN NOTHINGISMORE important to its value than its moisture content and test weight. With the Moisture-Max plus you can measure moisture and test WEIGHTANDITS s&AST s %ASY s !CCURATE ... and no screw cap which can damage grains, create oily residue and are cumbersome to use.

-OISTURE -AXAND-OISTURE -AX0LUS features include: s-ENU DRIVENOPERATINGSYSTEM s!NINTERNALSCALENOPRE WEIGHING s53"COMPATIBILITYFORCALIBRATIONLOADING s4ESTWEIGHTREADOUT-OISTURE -AXplus s5SEDFOROVERGRAINSANDPRODUCTS s!UTOMATICTEMPERATURECOMPENSATION

&ILLLOADER

%MPTYLOADERINTO ANALYZER

Package includes:

-OISTURE -AX

,OADER 0ART.O

"ELT#LIP

,EVELGRAIN

0RESSBUTTON RESULTS in seconds

Carrying Case

9 volt battery )NSTRUCTIONMANUAL 1 year manufacturer’s WARRANTY

33

READY STOCK

The parts you need, right at hand. The Ready Stock™ Parts Supply Locker program enables you to have parts stocked at your place of business. Why is Ready Stock™ right for your business?

Convenience sParts

are conveniently available when you need them, saving you both time and money

sSave

yourself the trip – your dealer comes to you

Cost Savings sNo

up-front cost – the locker and parts management are free (at participating dealerships 1)

sPay

only for the parts you use

Inventory Management sParts are stocked by your dealer and customized to your specific needs sEliminates obsolete inventory – parts are updated regularly

How do I participate in the Ready Stock™ Parts Supply program?

1. Contact your dealer to order a Ready Stock™ Parts Supply Locker 2. Your dealer will work with you on your customizable parts list 3. Your dealer will manage and restock inventory for you on an agreed upon schedule

Ready Stock™ Parts Supply Locker 46"W x 24"D x 72"H #MC4360

1

See your local New Holland dealer for details and qualification. Pricing and qualification for the Ready Stock™ Parts Supply Locker program are subject to your individual New Holland dealer.

2

For commercial use only. This offer applies to purchases of genuine New Holland parts and related services made using the CNH Capital Commercial Revolving Account in part with the Ready Stock™ Parts Supply Locker program. Customer participation subject to credit qualification, available credit and good standing on all CNH Capital America LLC accounts. Program subject to change or cancellation without notice.

34

INDEX Part No.

Page

208956. . . . . . . . . . . . 28 712447002. . . . . . . . . 28 742134. . . . . . . . . 17, 29 742135. . . . . . . . . 17, 29 786031. . . . . . . . . . . . . 7 801462. . . . . . . . . . . . . 9 850901. . . . . . . . . . . . . 8 9512490. . . . . . . . . . . 28 9560145. . . . . . . . 17, 29 9560147. . . . . . . . 17, 29 9560148. . . . . . . . . . . 17 9800346. . . . . . . . . . . 16 9800347. . . . . . . . . . . 16 9826150. . . . . . . . . . . . 4 9842263. . . . . . . . . . . . 7 9845842. . . . . . . . 25, 28 9845843. . . . . . . . 25, 28 82797030. . . . . . . . . . 15 82797031. . . . . . . . . . 15 82797032. . . . . . . . . . 15 82797033. . . . . . . . . . 15 82797034. . . . . . . . . . 15 82797035. . . . . . . . . . 15 84040942. . . . . . . . . . 30 84050397. . . . . . . . . . 28 84050430. . . . . . . 23, 30 84050431. . . . . . . 23, 30 84050432. . . . . . . 23, 30 84050517. . . . . . . 25, 28 84050518. . . . . . . . . . 25 84050519. . . . . . . . . . 16 84050520. . . . . . . . . . 16 84050611. . . . . . . . . . 28 84059809. . . . . . . . . . 21 84060079. . . . . . . . . . 28 84060205. . . . . . . . . . 25 84060206. . . . . . . . . . 25 84060212. . . . . . . . . . 28 84060218. . . . . . . 26, 29 84060286. . . . . . . . . . 30 84060302. . . . . . . . . . 30 84060303. . . . . . . . . . 30 84060985. . . . . . . . . . 28 84060988. . . . . . . . . . 28 84060995. . . . . . . . . . 24 84060996. . . . . . . 24, 28 84060997. . . . . . . . . . 16 84060998. . . . . . . . . . 16 84067682. . . . . . . . . . 29 84073833. . . . . . . . . . 28 84081019. . . . . . . . . . 29 84081054. . . . . . . . . . 30 84081104. . . . . . . . . . 25 84081105. . . . . . . . . . 25 84081168. . . . . . . . . . 29 84081263. . . . . . . . . . 28 84081288. . . . . . . . . . 25 84081289. . . . . . . . . . 25 84081342. . . . . . . 26, 29 84081381. . . . . . . . . . 29 84081389. . . . . . . 27, 30 84081390. . . . . . . 27, 30 84081496. . . . . . . 27, 30 84081512. . . . . . . . . . 30 84081526. . . . . . . . . . 28 84081527. . . . . . . . . . 30 84081646. . . . . . . . . . 28 84081747. . . . . . . . . . 29 84081944. . . . . . . 21, 30 84083296. . . . . . . 24, 28 84083297. . . . . . . 24, 28 84083486. . . . . . . 24, 28 84083487. . . . . . . 24, 28 84083664. . . . . . . . . . 30 84083685. . . . . . . 26, 29

Part No.

Page

84083686. . . . . . . 23, 30 84083687. . . . . . . 23, 30 84083688. . . . . . . 23, 30 84084323. . . . . . . 17, 29 84084324. . . . . . . 17,29 84084325. . . . 17, 23, 29 84084326. . . . 17, 23, 29 84084476. . . . . . . . . . 21 84084506. . . . . . . 17, 29 84084507. . . . . . . 17, 29 84084510. . . . . . . 17, 29 84084511. . . . . . . 17, 29 84084608. . . . . . . 21, 30 84084644. . . . . . . . . . 29 84084662. . . . . . . 17, 29 84084758. . . . . . . . . . 27 84084759. . . . . . . 23, 30 84084760. . . . . . . 23, 30 84084761. . . . . . . 23, 30 84084765. . . . . . . . . . 30 84084813. . . . . . . . . . 28 84084814. . . . . . . . . . 28 84084936. . . . . . . 27, 30 84084981. . . . . . . 17, 29 84084982. . . . . . . 17, 29 84084984. . . . . . . 17, 29 84084985. . . . . . . 17, 28 84095819. . . . . . . . . . 29 84095875. . . . . . . . . . 30 84095955. . . . . . . 23, 30 84095956. . . . . . . 23, 30 84095959. . . . . . . 23, 30 84095960. . . . . . . 23, 30 84095961. . . . . . . 23, 30 84095964. . . . . . . 23, 30 84095965. . . . . . . 23, 30 84095966. . . . . . . 23, 30 84095969. . . . . . . 23, 30 84110799. . . . . . . . . . 30 84112241. . . . . . . . . . 29 84434370. . . . . . . . . . 28 84434371. . . . . . . . . . 28 84438507. . . . . . . . . . 29 84438512. . . . . . . . . . 29 84438530. . . . . . . . . . 29 84438615. . . . . . . . . . 29 84438617. . . . . . . . . . 29 84461772. . . . . . . . . . 28 86503255. . . . . . . . . . 16 86503256. . . . . . . . . . 16 86512697. . . . . . . 25, 28 86512698. . . . . . . 25, 28 86528973. . . . . . . . . . 28 86541350. . . . . . . . . . . 9 86541351. . . . . . . . . . . 9 86556407. . . . . . . . . . 12 86556408. . . . . . . . . . 12 86556627. . . . . . . . . . . 9 86556628. . . . . . . . . . . 9 86556629. . . . . . . . . . . 9 86581143. . . . . . . . . . 28 86583343. . . . . . . . . . 13 86583345. . . . . . . . . . 13 86608231. . . . . . . . . . . 7 86616527. . . . . . . . . . . 5 86616528. . . . . . . . . . . 5 86616529. . . . . . . . . . . 5 86616689. . . . . . . . . . . 5 86616692. . . . . . . . . . . 5 86616693. . . . . . . . . . . 5 86634258. . . . . . . . . . . 9 86638827. . . . . . . . . . 13 86638828. . . . . . . . . . 13 86705199. . . . . . . . . . . 6 86900832. . . . . . . . . . . 5

Part No.

Page

86900833. . . . . . . . . . . 5 86900834. . . . . . . . . . . 5 86900835. . . . . . . . . . . 5 86974251. . . . . . . 25, 28 86977981. . . . . . . . . . . 5 86977982. . . . . . . . . . . 5 86978515. . . . . . . . . . 10 86978716. . . . . . . . . . 11 86978717. . . . . . . . . . 11 86979313. . . . . . . . . . 10 87011814. . . . . . . 26, 29 87011815. . . . . . . 26, 29 87012800. . . . . . . 25, 28 87015706. . . . . . . . . . . 4 87015708. . . . . . . . . . . 4 87031096. . . . . . . . . . 28 87031706. . . . . . . 26, 29 87031711. . . . . . . 26, 29 87034017. . . . . . . 25, 28 87034529. . . . . . . . . . 11 87045432. . . . . . . . . . . 4 87047029. . . . . . . . . . 29 87047030. . . . . . . . . . 29 87053603. . . . . . . . . . . 9 87058247. . . . . . . . . . . 9 87058248. . . . . . . . . . . 9 87109815. . . . 17, 23, 28 87109817. . . . 17, 23, 28 87109819. . . . 17, 23, 28 87109821. . . . 17, 23, 28 87109824. . . . 17, 23, 28 87109826. . . . 17, 23, 28 87109834. . . . . . . 17, 29 87109848. . . . . . . . . . 29 87109850. . . . . . . . . . 29 87280553. . . . . . . 26, 29 87282475. . . . . . . . . . 29 87284735. . . . . . . . . . 29 87297026. . . . . . . . . . 31 87297170. . . . . . . . . . . 4 87297435. . . . . . . 30, 32 87297780. . . . . . . . . . 15 87297781. . . . . . . . . . 15 87297782. . . . . . . . . . 15 87297783. . . . . . . . . . 15 87297784. . . . . . . . . . 15 87297785. . . . . . . . . . 15 87297786. . . . . . . . . . 15 87297787. . . . . . . . . . 15 87297788. . . . . . . . . . 15 87297791. . . . . . . . . . 13 87297793. . . . . . . . . . 12 87297795. . . . . . . . . . 12 87297796. . . . . . . . . . 12 87297797. . . . . . . . . . 14 87297798. . . . . . . . . . 19 87297799. . . . . . . . . . 19 87297800. . . . . . . . . . 18 87297801. . . . . . . . . . 18 87297802. . . . . . . . . . 17 87297803. . . . . . . . . . 17 87297804. . . . . . . . . . 17 87297806. . . . . . . . . . 17 87297808. . . . . . . . . . 18 87297809. . . . . . . . . . 18 87297810. . . . . . . . . . 18 87297811. . . . . . . . . . 18 87297812. . . . . . . . . . 18 87297817. . . . . . . . . . 14 87297819. . . . . . . . . . 19 87297820. . . . . . . . . . 19 87297870. . . . . . . . . . 15 87297872. . . . . . . . . . 14 87297873. . . . . . . . . . 19 87297874. . . . . . . . . . 19

Part No.

Page

87297875. . . . . . . . . . 13 87297876. . . . . . . . . . 22 87297882. . . . . . . . . . 27 87297972. . . . . . . . . . . 6 87297973. . . . . . . . . . . 6 87297974. . . . . . . . . . . 6 87297975. . . . . . . . . . . 6 87297976. . . . . . . . . . . 6 87297977. . . . . . . . . . . 6 87297978. . . . . . . . . . . 6 87297979. . . . . . . . . . . 6 87297980. . . . . . . . . . . 6 87297981. . . . . . . . . . . 6 87297982. . . . . . . . . . . 6 87297983. . . . . . . . . . . 6 87298119. . . . . . . . . . 27 87298121. . . . . . . . . . 27 87298212. . . . . . . . . . . 4 87298213. . . . . . . . . . . 4 87298560. . . . . . . . . . 22 87298561. . . . . . . . . . 22 87298562. . . . . . . . . . 22 87298563. . . . . . . . . . 22 87298836. . . . . . . . . . 24 87298837. . . . . . . . . . 24 87298838. . . . . . . . . . 24 87298839. . . . . . . . . . 24 87298845. . . . . . . . . . 12 87298858. . . . . . . . . . 20 87298859. . . . . . . . . . 20 87298860. . . . . . . . . . 20 87298861. . . . . . . . . . 20 87298862. . . . . . . . . . 20 87298863. . . . . . . . . . 20 87298864. . . . . . . . . . . 8 87298865. . . . . . . . . . . 8 87298866. . . . . . . . . . . 8 87298867. . . . . . . . . 7, 8 87298954. . . . . . . . . 7, 8 87299139. . . . . . . . . . 33 87299140. . . . . . . . . . 33 87299898. . . . . . . . . . 33 87329421. . . . . . . . . . 28 87333877. . . . . . . . . . 25 87333878. . . . . . . . . . 25 87340793. . . . . . . . . . 28 87350861. . . . . . . . . . 30 87372056. . . . . . . . . . 12 87372057. . . . . . . . . . 12 87372059. . . . . . . . . . 12 87387731. . . . . . . . . . . 9 87387732. . . . . . . . . . . 9 87387733. . . . . . . . . . . 9 87442324. . . . . . . . . . . 4 87442329. . . . . . . . . . . 4 87503566. . . . . . . . . . 12 87503567. . . . . . . . . . 12 87528030E . . . . . . . . 11 87528033E . . . . . . . . 11 87528034E . . . . . . . . 11 87528035E . . . . . . . . 11 87528036E . . . . . . . . 11 87544032. . . . . . . . . . . 9 87544034. . . . . . . . . . . 9 87565747. . . . . . . . . . 28 87565749. . . . . . . . . . 28 87565755. . . . . . . . . . 28 87662994. . . . . . . 26, 29 87665910. . . . . . . . . . 28 87665949. . . . . . . . . . 28 89560146. . . . . . . . . . 17 1132041R1NH . . . . . . 22 1132042R1NH . . . . . . 22 87297853NH . . . . . . . 27 87297854NH . . . . . . . 27

Part No.

Page

87297938NH . . . . . . . . 5 87297943NH . . . . . . . . 5 87298058NH . . . . . . . 22 B93866NH . . . . . . . . . . 7 B93868NH . . . . . . . . . . 7 B94154NH . . . . . . . . 7, 9 B94155NH . . . . . . . . 7, 9 B94710NH . . . . . . . . . . 7 B94712NH . . . . . . . . . . 7 B95408NH . . . . . . . . . . 7 B95409NH . . . . . . . . . . 7 B95573NH . . . . . . . . . 10 B95574NH . . . . . . . . . 10 B95575NH . . . . . . . . . 10 B95576NH . . . . . . . . . 10 B95577NH . . . . . . . . . 10 B95580NH . . . . . . . . . 10 B95581NH . . . . . . . . . 10 B95582NH . . . . . . . . . 10 B95623 . . . . . . . . . . . . 6 B95624NH . . . . . . . . . . 6 B95644 . . . . . . . . . . . . 6 B95645 . . . . . . . . . . . . 6 B95785S . . . . . . . . . . 22 B95786S . . . . . . . . . . 22 B95787 . . . . . . . . . . . 22 B95788 . . . . . . . . . . . 22 B95789 . . . . . . . . . . . 22 B95856NH . . . . . . . . . . 7 B95857NH . . . . . . . . . . 7 B95872NH . . . . . . . . . . 7 B96092 . . . . . . . . 22, 32 B96154ANH . . . . . . . . 10 B96155ANH . . . . . . . . 10 B96170 . . . . . . . . . . . 11 B96171 . . . . . . . . . . . 11 B96172 . . . . . . . . . . . 11 B96173 . . . . . . . . . . . 11 B96174 . . . . . . . . . . . 11 B96175 . . . . . . . . . . . 11 B96176 . . . . . . . . . . . 11 B96177 . . . . . . . . . . . 11 B96178 . . . . . . . . . . . 11 B96203 . . . . . . . . . . . 15 B96204 . . . . . . . . . . . 15 B96205 . . . . . . . . . . . 15 B96206 . . . . . . . . . . . 15 B96508 . . . . . . . . . . . 22 B96513 . . . . . . . . . . . 22 B96520 . . . . . . . . . . . . 8 B96538 . . . . . . . . . . 7, 8 B96539 . . . . . . . . . . 7, 8 B96549 . . . . . . . . . . . . 7 B96551 . . . . . . . . . . . . 7 B96552 . . . . . . . . . . . . 8 B96649NH . . . . . . . . . 31 B96650NH . . . . . . . . . 31 B96651 . . . . . . . . . . . . 7 B96656 . . . . . . . . . . . 15 B96657 . . . . . . . . . . . 15 B96658 . . . . . . . . . . . 15 B96676 . . . . . . . . . . . 15 FM20101DS . . . . . . . . 31 FM20400DS . . . . . . . . 31 ZAE4PANA . . . . . . . . . 22 ZAECE2412 . . . . . . . . 22 ZAECEC25 . . . . . . . . . 22 ZAEVCCS130B . . . . . 22 ZAEVCCS130XB . . . . 22 ZAEVOSBHC3 . . . . . . 22 ZAEVOSHDCL1B . . . . 22 ZAEVOSHDCL2B . . . . 22

35

Trusted solutions from a trusted name.

When you place your confidence in innovative New Holland agricultural equipment, you also get the finest support. Your local New Holland dealer stands behind you at every step with the equipment, parts, service, and financial services you and your operation need. Quality parts and service. Turn to your New Holland dealer after the sale for expert, factory-trained service and genuine New Holland-branded parts to keep you working productively season after season. Financing solutions. Your New Holland dealer can tell you about smart ways to turn your financial challenges into opportunities with a portfolio of innovative financial services available through CNH Capital, including customized financing, leasing, insurance, and the purchasing convenience of a Commercial Revolving Account.

For reliable equipment, parts and service – or just honest advice on farming and finance – turn to New Holland and your trusted New Holland dealer.

TOP SERVICE MAKES YOUR NEEDS A TOP PRIORITY Top Service is managed in close partnership with New Holland Dealers and Service Teams. TOP AVAILABILITY 24/7, year-round support and information — just by calling one toll-free number.

TOP SPEED New Holland is redefining “fast” — with express parts delivery when and where you need it.

TOP PRIORITY Fast-track solutions maximize your productivity — because your harvest can’t wait.

TOP SATISFACTION We drive and track the solution you need, keeping you informed — until you are satisfied.

Call toll-free: 1-888-290-7377

9/52.%7(/,,!.$$%!,%2

Visit our Web site at www.newholland.com/na Or, call toll-free: 1-888-290-7377 Design, materials and/or specifications are subject to change without notice and without liability therefor. Specifications are applicable to units sold in Canada, the 1˜ˆÌi`Ê-Ì>ÌiÃ]ʈÌÃÊÌiÀÀˆÌœÀˆiÃÊ>˜`Ê«œÃÃiÃȜ˜Ã]Ê>˜`ʓ>ÞÊÛ>ÀÞÊ outside these areas.

We are proud to support the FFA.

^ÊÓäänÊ Ê
“iÀˆV>Ê

iÜÊœ>˜`ʈÃÊ>ÊÀi}ˆÃÌiÀi`ÊÌÀ>`i“>ÀŽÊœvÊ Ê
“iÀˆV>Ê °

Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual before using the equipment. Pay close attention to all safety and operating decals and never operate machinery without all shields, protective devices and structures in place. *‡£{Ι£ÊUÊAÊ,/-Ê, - ,6 ÊUÊ*, / Ê Ê1°-°
°