Custom 1911
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Custom 1911 as PDF for free.
More details
- Words: 8,636
- Pages: 6
Loading documents preview...
1911-A1 Accurizing Package: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $895.00 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Tighten slide to frame Acc-U-Rail option, additional $100 charge Fit custom match barrel system (barrel & bushing or bull barrel) Ramped barrel, additional $100 charge Install custom match hammer & sear Fit match aluminum trigger Polish feed ramp Throat barrel Tune extractor & ejector Deburr pistol internally Refinish as needed (Additional charge for some finishes) Inspect & test fire for function
1911-A1 Defense Package: GI models: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $350.00 Other Springfield models: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $260.00 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Deburr pistol internally Tune extractor & ejector Recut barrel throat & polish feed ramp Install custom match bushing Check headspace Install new recoil spring & firing pin spring Tuned 4.5 lb. trigger GI Models: Lower & flare ejection port; install extended ejector Refinish as needed (Additional charge for some finishes) Reliability tuning Inspect & test fire for function
1911-A1 Loaded Package: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $895.00 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 14. 15.
Novak style low mount rear sight with 2 green dot tritium inserts Dovetail front sight with green tritium insert Lightweight aluminum trigger Extended ambidextrous thumb safety Flat checkered mainspring housing (ILS) Beavertail grip safety Skeletonized delta factory hammer Standard carry bevel of sharp edges Deburr pistol internally Tune extractor & ejector Recut barrel throat; polish feed ramp Titanium firing pin with heavy duty firing pin spring 4.5 lb. trigger job Front cocking serrations (Additional $100 charge) Refinish as needed. (Additional charge for some finishes) Inspect & test fire for function
1911-A1 TRP Package GI & Mil Spec models: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1645.00 Older Springfield models (pre 2000): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1450.00 “Loaded Springfield models” (2000 & newer): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 895.00 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
Install TRP barrel & bushing (bull barrel system in pistols shorter than 5”) Factory skeletonized delta hammer Low mount Novak style rear sight with tritium inserts Dovetail front sight with tritium dot insert (Dovetail & tritium insert not available on ported V10 handguns) Extended ambidextrous thumb safety Beavertail grip safety Adjustable lightweight aluminum trigger Full length guide rod with heavy duty recoil spring Flat checkered mainspring housing Polished feed ramp; throated barrel Tune & polish extractor Deburr pistol internally Standard carry bevel sharp edges of pistol Machine checker front strap, 20LPI Tune trigger pull to 4.5 lb Front cocking serrations Refinish as needed (carbon steel pistols-Armory Kote™; stainless steel-satin finish) G10 black/gray grips Springfield 2 piece mag well-Additional $100 charge **No TRP markings added to pistol in this package.** Inspect & test fire for function Stainless steel 1911-A1 pistols may require an additional fee, determined upon inspection
1911-A1 Tech Inspection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $100.00 Have your 1911-A1 pistol checked by a custom technician for proper function. Replacement of parts at additional charge. (Customer will be contacted with additional charges, if any, after inspection.)
1911-A1 Sights: (*Refinishing done at additional charge.) Fixed Sight Options: ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Install fixed 3 white dot Mil Spec sights in existing sight cuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install Novak or similar style low mount rear target fixed sight, matching front sight . . . . . . . . . . . . . . . . . . Install Heinie low mount rear target sight, matching front sight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install Novak style low mount fixed rear sight , matching front sight, with tritium inserts . . . . . . . . . . . . . . Install Heine low mount fixed sights with tritium inserts (specify style) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install tritium night sights (slide already milled with correct front & rear sight cuts) . . . . . . . . . . . . . . . . . . . Install tritium night sights in existing low mount rear sight cut, new dovetail front cut . . . . . . . . . . . . . . . . Install Harrison Design fixed sights, in existing LPA or Bomar style sight cuts in slide, (front & rear sight set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Same as above, but with tritium inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 65.00 $180.00* $180.00* $260.00* $260.00* $135.00 $165.00 $100.00 $150.00
Adjustable Rear Sight Options: ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Install Springfield fully adjustable target rear sight, low mount cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install Springfield fully adjustable target rear sight, deluxe cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install Springfield fully adjustable target rear sight, forward protected cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install Springfield fully adjustable rear sight, matching dovetail front (with 3 dot tritium inserts) . . . . . . Install Springfield fully adjustable rear sight, matching dovetail front with 3 dot tritium inserts (slide milled with correct sight cuts) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install adjustable carry sights with tritium inserts (includes front & rear sight) . . . . . . . . . . . . . . . . . . . . . . . . . Install adjustable carry sights with tritium inserts (slide already milled with correct sight cuts) . . . . . . . . . Install low mount Aristocrat tri-set sight set or Aristocrat rib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$175.00* $200.00* $200.00* $350.00 $175.00 $350.00* $175.00 $300.00*
Front Sight Options:
❑ ❑ ❑ ❑ ❑ ❑ ❑
Install dovetail target front sight, any style, includes cold bluing of sight cut . . . . . . . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with fiber optic insert, includes cold bluing of sight cut . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with tritium insert, includes cold bluing for sight cut . . . . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with gold bead insert, includes cold bluing of sight cut . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with fiber optic insert, in existing dovetail cut in slide . . . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with tritium insert, in existing dovetail cut in slide . . . . . . . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with gold bead, in existing dovetail cut in slide . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 55.00 $ 80.00 $ 90.00 $95.00 $ 65.00 $ 75.00 $80.00
Misc. Sight Options: ❑ Modify sights for 3 painted white dots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 65.00 ❑ Range test for accuracy (test target enclosed when pistol returned) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $100.00 **Target sights are plain black and do not have any type of dots or inserts. Fiber optic sights require some sort of ambient light source to glow and will not glow in low light or darkness. Tritium inserts will only glow in very low light or darkness.** 1911-A1 Barrels & Accuracy:
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Fit slide to frame (tighten); reparkerizing as necessary. Other finishes additional charge. . . . . . . . . . . . . . . Acc-U-Rail slide rail system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit match barrel & bushing (non-supported chamber) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit match bull barrel (non-supported chamber) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit fully ramped & supported match barrel (specify barrel & bushing or bull barrel) . . . . . . . . . . . . . . . . . . . . Fit match bushing only to existing barrel & slide (5” or longer barrel length) . . . . . . . . . . . . . . . . . . . . . . . . . . Fit custom compensator & match barrel (non-supported chamber, cone or bushing style) . . . . . . . . . . . . Fit custom compensator & match barrel (ramped & supported chamber, cone or bushing style) . . . . . . .
$190.00 $295.00 $290.00 $350.00 $390.00 $ 60.00 $675.00 $825.00
Triggers; Trigger Work; Hammer:
❑ ❑ ❑ ❑ ❑
Fit factory skeletonized hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit match trigger (Specify speed, long match, short match) No adjustment of trigger pull . . . . . . . . . . . . . Action job, series 70 pistols (4 lb. pull or greater) with existing parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Action job, series 80 pistols (4 lb. pull or greater) with existing parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Action job with tool steel match hammer & sear (Required for trigger pull less than 4 lb.) . . . . . . . . . . . . .
$ 50.00 $ 50.00 $100.00 $125.00 $225.00
Safeties; Mag Releases; Mag Wells (*Refinishing done at additional charge.)
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Fit extended ambidextrous thumb safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit extended single side thumb safety (not ambidextrous) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit Springfield beavertail grip safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit extended magazine release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit ambidextrous magazine release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit flat checkered mainspring housing (Specify ILS or non-ILS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bevel & polish magazine well on frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit Springfield 2 piece magazine well to match bevel on frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit S&A 1 piece magazine well to match bevel on frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit weld-on magazine well, opened to maximum diameter (includes new mainspring housing) . . . . . . . Install Heinie magazine well . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add lanyard loop to existing mainspring housing (Specify standard or recessed) . . . . . . . . . . . . . . . . . . . . . .
$100.00 $ 80.00 $100.00* $ 40.00 $125.00 $ 75.00 $ 55.00* $140.00* $180.00* $275.00* $275.00 $ 75.00*
Internal Tuning:
❑ ❑ ❑ ❑ ❑ ❑ ❑
Tune extractor (labor only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit & tune new extractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polish feed ramp & throat barrel (labor only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deburr pistol internally (labor only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bevel & polish magazine well (labor only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install full length guide rod (Specify 1 or 2 piece) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install extended ejector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 30.00 $ 65.00 $ 50.00 $ 50.00* $ 50.00* $ 50.00 $ 35.00
External Modifications: (*Refinishing required at additional charge.) Front Strap Treatments:
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Hand checker front strap, 20LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hand checker front strap, 25LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hand checker front strap, 30LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine checker front strap, 20LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine checker front strap, 25LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine checker front strap, 30LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hand checker front strap, 20LPI (Springfield wide body frame) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serrate front strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stipple front strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stipple front strap of Springfield wide body frame (Stipple each side of serrated front strap) . . . . . . . . . . Other front strap treatments available upon request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$200.00* $220.00* $250.00* $150.00* $160.00* $170.00* $275.00* $110.00* $135.00* $175.00* P.O.R.*
Other Frame Modifications:
❑ ❑ ❑ ❑ ❑ ❑
Checker underneath trigger guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Checker front of trigger guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Square style trigger guard (Specify standard or moved forward 3/8”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Undercut front strap (Specify style) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recontour front strap & dust cover for 2002 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Modify frame for “Bobtail style” mainspring housing (Mainspring housing included) . . . . . . . . . . . . . . . . . .
$ 70.00* $ 95.00* $250.00* $ 75.00* $145.00* $225.00*
Slide Modifications:
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Checker rear of slide (Specify 30LPI, 40LPI, or 50LPI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serrate rear of slide, 40LPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serrate top of slide, 40LPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flatten top of slide & serrate 40LPI (Not available on slides with dovetail front sight) . . . . . . . . . . . . . . . . . . Machine slide & barrel for ports (Requires bull barrel installation at additional charge) . . . . . . . . . . . . . . . . Front cocking serrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Skeletonize slide for light loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lower & flare ejection port (Includes properly fit extended ejector) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ball cuts on slide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . French border top of slide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 90.00* $ 75.00* $110.00* $160.00* $250.00* $100.00* $190.00* $ 90.00* $ 65.00* $100.00*
Other External Modifications:
❑ ❑ ❑ ❑ ❑
Standard carry bevel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Radical carry bevel (“Soap bar” feel) (Carbon steel handguns) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Radical carry bevel (“Soap bar” feel) (Stainless steel handguns) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nub slide stop (FBI style) using existing slide stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Drill & tap for scope mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$100.00* $350.00* $450.00 $25.00 P.O.R.
Refinishing Services: (Some finishes may require additional shipping and handling charges.) Refinishing charges include minimal prep time. Firearms that require extensive prep work, or are deeply pitted, may require a labor fee. We will notify you of any additional fees before starting the finish work on the handgun.
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Parkerize complete pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parkerize slide & slide small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parkerize frame & frame small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parkerize small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blue complete pistol (Specify style-matte, brushed, high polish. Addl. charge for high polish.) . . . . . . . . Blue slide & slide small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blue frame & frame small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blue small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Armory Kote™ complete pistol (Specify Flat Black, Matte Black, or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . Armory Kote™ slide and slide small parts only (Specify Flat Black, Matte Black, or OD Green) . . . . . . . . . . . Armory Kote™ frame & frame small parts only (Specify Flat Black, Matte Black, or OD Green) . . . . . . . . . . . Armory Kote™ small parts only (Specify Flat Black, Matte Black, or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . Black T finish complete pistol (Matte black or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Black T finish slide & slide small parts only (Matte black or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Black T finish frame & frame small parts only (Matte black or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Black T small parts only (Matte black or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nickel Teflon complete pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nickel Teflon slide & slide small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nickel Teflon frame & frame small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nickel Teflon small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hard chrome complete pistol (Matte or brushed. Addl. charge for brushed.) . . . . . . . . . . . . . . . . . . . . . . . . . . Hard chrome slide & slide small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hard chrome frame & frame small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hard chrome small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strip chrome from complete pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strip chrome from slide & slide small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strip chrome from frame & frame small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strip chrome from small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Anodize lightweight frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$80.00 $45.00 $45.00 P.O.R. $250.00 $125.00 $175.00 P.O.R. $150.00 $ 80.00 $ 80.00 P.O.R. $215.00 $100.00 $145.00 P.O.R. $265.00 $165.00 $190.00 P.O.R. $265.00 $165.00 $190.00 P.O.R. $ 75.00 $ 40.00 $ 40.00 $ 40.00 $175.00
Refinishing Continued on Next Page
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Satin (matte) finish stainless steel pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.O.R. Black finish stainless steel pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.O.R. Xtremeflauge complete pistol (Custom patterns available.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Beg. $265.00 Xtremeflauge slide & slide small parts only (Custom patterns available) . . . . . . . . . . . . . . . . . . . . . . . . . . Beg. $150.00 Xtremeflauge frame & frame small parts only (Custom patterns available) . . . . . . . . . . . . . . . . . . . . . . . Beg. $165.00 Ion Bond complete pistol (Satin or Matte) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $350.00 Ion Bond slide & slide small parts only (Satin or Matte) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $195.00 Ion Bond frame & frame small parts only (Satin or Matte) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $195.00
*Requires refinishing at additional charge. See Refinishing list for additional cost. Parts included in above services, unless otherwise stated. Customer supplied parts must be inspected by Springfield gunsmiths before they can be used in custom build projects, and may require additional charges for fitting and installation. Prices subject to change without notice. P.O.R. - Price on Request
Tighten slide to frame Acc-U-Rail option, additional $100 charge Fit custom match barrel system (barrel & bushing or bull barrel) Ramped barrel, additional $100 charge Install custom match hammer & sear Fit match aluminum trigger Polish feed ramp Throat barrel Tune extractor & ejector Deburr pistol internally Refinish as needed (Additional charge for some finishes) Inspect & test fire for function
1911-A1 Defense Package: GI models: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $350.00 Other Springfield models: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $260.00 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Deburr pistol internally Tune extractor & ejector Recut barrel throat & polish feed ramp Install custom match bushing Check headspace Install new recoil spring & firing pin spring Tuned 4.5 lb. trigger GI Models: Lower & flare ejection port; install extended ejector Refinish as needed (Additional charge for some finishes) Reliability tuning Inspect & test fire for function
1911-A1 Loaded Package: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $895.00 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 14. 15.
Novak style low mount rear sight with 2 green dot tritium inserts Dovetail front sight with green tritium insert Lightweight aluminum trigger Extended ambidextrous thumb safety Flat checkered mainspring housing (ILS) Beavertail grip safety Skeletonized delta factory hammer Standard carry bevel of sharp edges Deburr pistol internally Tune extractor & ejector Recut barrel throat; polish feed ramp Titanium firing pin with heavy duty firing pin spring 4.5 lb. trigger job Front cocking serrations (Additional $100 charge) Refinish as needed. (Additional charge for some finishes) Inspect & test fire for function
1911-A1 TRP Package GI & Mil Spec models: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1645.00 Older Springfield models (pre 2000): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1450.00 “Loaded Springfield models” (2000 & newer): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 895.00 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
Install TRP barrel & bushing (bull barrel system in pistols shorter than 5”) Factory skeletonized delta hammer Low mount Novak style rear sight with tritium inserts Dovetail front sight with tritium dot insert (Dovetail & tritium insert not available on ported V10 handguns) Extended ambidextrous thumb safety Beavertail grip safety Adjustable lightweight aluminum trigger Full length guide rod with heavy duty recoil spring Flat checkered mainspring housing Polished feed ramp; throated barrel Tune & polish extractor Deburr pistol internally Standard carry bevel sharp edges of pistol Machine checker front strap, 20LPI Tune trigger pull to 4.5 lb Front cocking serrations Refinish as needed (carbon steel pistols-Armory Kote™; stainless steel-satin finish) G10 black/gray grips Springfield 2 piece mag well-Additional $100 charge **No TRP markings added to pistol in this package.** Inspect & test fire for function Stainless steel 1911-A1 pistols may require an additional fee, determined upon inspection
1911-A1 Tech Inspection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $100.00 Have your 1911-A1 pistol checked by a custom technician for proper function. Replacement of parts at additional charge. (Customer will be contacted with additional charges, if any, after inspection.)
1911-A1 Sights: (*Refinishing done at additional charge.) Fixed Sight Options: ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Install fixed 3 white dot Mil Spec sights in existing sight cuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install Novak or similar style low mount rear target fixed sight, matching front sight . . . . . . . . . . . . . . . . . . Install Heinie low mount rear target sight, matching front sight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install Novak style low mount fixed rear sight , matching front sight, with tritium inserts . . . . . . . . . . . . . . Install Heine low mount fixed sights with tritium inserts (specify style) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install tritium night sights (slide already milled with correct front & rear sight cuts) . . . . . . . . . . . . . . . . . . . Install tritium night sights in existing low mount rear sight cut, new dovetail front cut . . . . . . . . . . . . . . . . Install Harrison Design fixed sights, in existing LPA or Bomar style sight cuts in slide, (front & rear sight set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Same as above, but with tritium inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 65.00 $180.00* $180.00* $260.00* $260.00* $135.00 $165.00 $100.00 $150.00
Adjustable Rear Sight Options: ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Install Springfield fully adjustable target rear sight, low mount cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install Springfield fully adjustable target rear sight, deluxe cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install Springfield fully adjustable target rear sight, forward protected cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install Springfield fully adjustable rear sight, matching dovetail front (with 3 dot tritium inserts) . . . . . . Install Springfield fully adjustable rear sight, matching dovetail front with 3 dot tritium inserts (slide milled with correct sight cuts) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install adjustable carry sights with tritium inserts (includes front & rear sight) . . . . . . . . . . . . . . . . . . . . . . . . . Install adjustable carry sights with tritium inserts (slide already milled with correct sight cuts) . . . . . . . . . Install low mount Aristocrat tri-set sight set or Aristocrat rib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$175.00* $200.00* $200.00* $350.00 $175.00 $350.00* $175.00 $300.00*
Front Sight Options:
❑ ❑ ❑ ❑ ❑ ❑ ❑
Install dovetail target front sight, any style, includes cold bluing of sight cut . . . . . . . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with fiber optic insert, includes cold bluing of sight cut . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with tritium insert, includes cold bluing for sight cut . . . . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with gold bead insert, includes cold bluing of sight cut . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with fiber optic insert, in existing dovetail cut in slide . . . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with tritium insert, in existing dovetail cut in slide . . . . . . . . . . . . . . . . . . . . . . . . . . Install dovetail front sight with gold bead, in existing dovetail cut in slide . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 55.00 $ 80.00 $ 90.00 $95.00 $ 65.00 $ 75.00 $80.00
Misc. Sight Options: ❑ Modify sights for 3 painted white dots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 65.00 ❑ Range test for accuracy (test target enclosed when pistol returned) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $100.00 **Target sights are plain black and do not have any type of dots or inserts. Fiber optic sights require some sort of ambient light source to glow and will not glow in low light or darkness. Tritium inserts will only glow in very low light or darkness.** 1911-A1 Barrels & Accuracy:
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Fit slide to frame (tighten); reparkerizing as necessary. Other finishes additional charge. . . . . . . . . . . . . . . Acc-U-Rail slide rail system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit match barrel & bushing (non-supported chamber) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit match bull barrel (non-supported chamber) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit fully ramped & supported match barrel (specify barrel & bushing or bull barrel) . . . . . . . . . . . . . . . . . . . . Fit match bushing only to existing barrel & slide (5” or longer barrel length) . . . . . . . . . . . . . . . . . . . . . . . . . . Fit custom compensator & match barrel (non-supported chamber, cone or bushing style) . . . . . . . . . . . . Fit custom compensator & match barrel (ramped & supported chamber, cone or bushing style) . . . . . . .
$190.00 $295.00 $290.00 $350.00 $390.00 $ 60.00 $675.00 $825.00
Triggers; Trigger Work; Hammer:
❑ ❑ ❑ ❑ ❑
Fit factory skeletonized hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit match trigger (Specify speed, long match, short match) No adjustment of trigger pull . . . . . . . . . . . . . Action job, series 70 pistols (4 lb. pull or greater) with existing parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Action job, series 80 pistols (4 lb. pull or greater) with existing parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Action job with tool steel match hammer & sear (Required for trigger pull less than 4 lb.) . . . . . . . . . . . . .
$ 50.00 $ 50.00 $100.00 $125.00 $225.00
Safeties; Mag Releases; Mag Wells (*Refinishing done at additional charge.)
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Fit extended ambidextrous thumb safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit extended single side thumb safety (not ambidextrous) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit Springfield beavertail grip safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit extended magazine release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit ambidextrous magazine release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit flat checkered mainspring housing (Specify ILS or non-ILS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bevel & polish magazine well on frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit Springfield 2 piece magazine well to match bevel on frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit S&A 1 piece magazine well to match bevel on frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit weld-on magazine well, opened to maximum diameter (includes new mainspring housing) . . . . . . . Install Heinie magazine well . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add lanyard loop to existing mainspring housing (Specify standard or recessed) . . . . . . . . . . . . . . . . . . . . . .
$100.00 $ 80.00 $100.00* $ 40.00 $125.00 $ 75.00 $ 55.00* $140.00* $180.00* $275.00* $275.00 $ 75.00*
Internal Tuning:
❑ ❑ ❑ ❑ ❑ ❑ ❑
Tune extractor (labor only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fit & tune new extractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polish feed ramp & throat barrel (labor only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deburr pistol internally (labor only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bevel & polish magazine well (labor only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install full length guide rod (Specify 1 or 2 piece) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Install extended ejector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 30.00 $ 65.00 $ 50.00 $ 50.00* $ 50.00* $ 50.00 $ 35.00
External Modifications: (*Refinishing required at additional charge.) Front Strap Treatments:
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Hand checker front strap, 20LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hand checker front strap, 25LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hand checker front strap, 30LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine checker front strap, 20LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine checker front strap, 25LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine checker front strap, 30LPI (single stack models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hand checker front strap, 20LPI (Springfield wide body frame) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serrate front strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stipple front strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stipple front strap of Springfield wide body frame (Stipple each side of serrated front strap) . . . . . . . . . . Other front strap treatments available upon request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$200.00* $220.00* $250.00* $150.00* $160.00* $170.00* $275.00* $110.00* $135.00* $175.00* P.O.R.*
Other Frame Modifications:
❑ ❑ ❑ ❑ ❑ ❑
Checker underneath trigger guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Checker front of trigger guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Square style trigger guard (Specify standard or moved forward 3/8”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Undercut front strap (Specify style) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recontour front strap & dust cover for 2002 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Modify frame for “Bobtail style” mainspring housing (Mainspring housing included) . . . . . . . . . . . . . . . . . .
$ 70.00* $ 95.00* $250.00* $ 75.00* $145.00* $225.00*
Slide Modifications:
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Checker rear of slide (Specify 30LPI, 40LPI, or 50LPI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serrate rear of slide, 40LPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serrate top of slide, 40LPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flatten top of slide & serrate 40LPI (Not available on slides with dovetail front sight) . . . . . . . . . . . . . . . . . . Machine slide & barrel for ports (Requires bull barrel installation at additional charge) . . . . . . . . . . . . . . . . Front cocking serrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Skeletonize slide for light loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lower & flare ejection port (Includes properly fit extended ejector) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ball cuts on slide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . French border top of slide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$ 90.00* $ 75.00* $110.00* $160.00* $250.00* $100.00* $190.00* $ 90.00* $ 65.00* $100.00*
Other External Modifications:
❑ ❑ ❑ ❑ ❑
Standard carry bevel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Radical carry bevel (“Soap bar” feel) (Carbon steel handguns) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Radical carry bevel (“Soap bar” feel) (Stainless steel handguns) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nub slide stop (FBI style) using existing slide stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Drill & tap for scope mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$100.00* $350.00* $450.00 $25.00 P.O.R.
Refinishing Services: (Some finishes may require additional shipping and handling charges.) Refinishing charges include minimal prep time. Firearms that require extensive prep work, or are deeply pitted, may require a labor fee. We will notify you of any additional fees before starting the finish work on the handgun.
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Parkerize complete pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parkerize slide & slide small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parkerize frame & frame small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parkerize small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blue complete pistol (Specify style-matte, brushed, high polish. Addl. charge for high polish.) . . . . . . . . Blue slide & slide small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blue frame & frame small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blue small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Armory Kote™ complete pistol (Specify Flat Black, Matte Black, or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . Armory Kote™ slide and slide small parts only (Specify Flat Black, Matte Black, or OD Green) . . . . . . . . . . . Armory Kote™ frame & frame small parts only (Specify Flat Black, Matte Black, or OD Green) . . . . . . . . . . . Armory Kote™ small parts only (Specify Flat Black, Matte Black, or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . Black T finish complete pistol (Matte black or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Black T finish slide & slide small parts only (Matte black or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Black T finish frame & frame small parts only (Matte black or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Black T small parts only (Matte black or OD Green) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nickel Teflon complete pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nickel Teflon slide & slide small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nickel Teflon frame & frame small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nickel Teflon small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hard chrome complete pistol (Matte or brushed. Addl. charge for brushed.) . . . . . . . . . . . . . . . . . . . . . . . . . . Hard chrome slide & slide small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hard chrome frame & frame small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hard chrome small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strip chrome from complete pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strip chrome from slide & slide small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strip chrome from frame & frame small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strip chrome from small parts only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Anodize lightweight frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$80.00 $45.00 $45.00 P.O.R. $250.00 $125.00 $175.00 P.O.R. $150.00 $ 80.00 $ 80.00 P.O.R. $215.00 $100.00 $145.00 P.O.R. $265.00 $165.00 $190.00 P.O.R. $265.00 $165.00 $190.00 P.O.R. $ 75.00 $ 40.00 $ 40.00 $ 40.00 $175.00
Refinishing Continued on Next Page
❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑
Satin (matte) finish stainless steel pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.O.R. Black finish stainless steel pistol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.O.R. Xtremeflauge complete pistol (Custom patterns available.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Beg. $265.00 Xtremeflauge slide & slide small parts only (Custom patterns available) . . . . . . . . . . . . . . . . . . . . . . . . . . Beg. $150.00 Xtremeflauge frame & frame small parts only (Custom patterns available) . . . . . . . . . . . . . . . . . . . . . . . Beg. $165.00 Ion Bond complete pistol (Satin or Matte) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $350.00 Ion Bond slide & slide small parts only (Satin or Matte) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $195.00 Ion Bond frame & frame small parts only (Satin or Matte) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $195.00
*Requires refinishing at additional charge. See Refinishing list for additional cost. Parts included in above services, unless otherwise stated. Customer supplied parts must be inspected by Springfield gunsmiths before they can be used in custom build projects, and may require additional charges for fitting and installation. Prices subject to change without notice. P.O.R. - Price on Request
Related Documents
Custom 1911
February 2021 1
1911
February 2021 2
1911 Complete Blueprints
January 2021 0
Aef2 File12 Testb Custom
February 2021 0
Affidavit Of Allodial Custom
January 2021 0
Colt 1911 Blueprints
February 2021 6More Documents from "Randy Wilson"