Dimensions In [inch]

SAMPLE FILE Report Date: Report Time:

7/2/02 12:45:03 PM

This is a sample report from the Optalign PLUS Explorer software.

File Information File name Company: Plant: Area: Machine Train: Last Measurement: Comment: User:

SAMPLE FILE Ludeca, Inc. Demo Software Miami, FL 1/14/04 3:59:00 AM Sample Report Machine graphic

Dimensions in [inch]

RPM

36.000

1800

33.000

30.000

10.500

38.000

7.000

8.000

Machine dimensions Left foot to right foot, Left Machine Right foot to coupling, Left Machine Coupling distance Revolutions per minute (RPM) Transducer to coupling Transducer to reflector Coupling to left foot, Right Machine Left foot to right foot, Right Machine

licensed to: NOT LICENSED

10.500 38.000 30.000 1800 33.000 36.000 7.000 8.000

[inch] [inch] [inch] [inch] [inch] [inch] [inch]

Page 1 of 3

SAMPLE FILE Report Date: Report Time:

7/2/02 12:45:03 PM

This is a sample report from the Optalign PLUS Explorer software.

Result graphic, Actual minus spec. (Targets and Thermal growth) -3.6 B mils

0.0 mils

0.0 mils 202.2 B mils

0.0 mils

11.6 A mils

15.2 mils

19.2 mils

150.0 mils

138.8 mils

159.9 A mils

0.0 mils

Coupling values, Actual Measurement Mode Offset B Offset A Offset B Offset A

Continuous Sweep vertical vertical horizontal horizontal

-2.6 -6.4 220.5 134.3

[mils] [mils] [mils] [mils]

Coupling values, Actual minus spec. (Targets and Thermal growth) Measurement Mode Offset B Offset A Offset B Offset A

Continuous Sweep vertical vertical horizontal horizontal

-3.6 11.6 202.2 159.9

[mils] [mils] [mils] [mils]

vertical vertical horizontal horizontal

0.0 0.0 0.0 0.0

[mils] [mils] [mils] [mils]

vertical vertical horizontal horizontal

-15.2 -19.2 -150.0 -138.8

[mils] [mils] [mils] [mils]

Foot correction values Left Machine Left foot Right foot Left foot Right foot Right Machine Left foot Right foot Left foot Right foot licensed to: NOT LICENSED

Page 2 of 3

SAMPLE FILE Report Date: Report Time:

7/2/02 12:45:03 PM

This is a sample report from the Optalign PLUS Explorer software.

Soft foot value graphic 8.4 [mils]

2.3 [mils]

1.8 [mils]

2.5 [mils]

3.3 [mils]

6.4 [mils]

3.2 [mils]

6.0 [mils]

Thermal growth values Left Machine Left foot Right foot Left foot Right foot Right Machine Left foot Right foot Left foot Right foot

vertical vertical horizontal horizontal

0.0 0.0 4.0 2.0

[mils] [mils] [mils] [mils]

vertical vertical horizontal horizontal

0.0 0.0 2.0 5.0

[mils] [mils] [mils] [mils]

1.0 -18.0 6.0 -21.0

[mils] [mils] [mils] [mils]

1800

RPM

Excellent 18.0 18.0

[mils] [mils]

Target values Offset B Offset A Offset B Offset A

vertical vertical horizontal horizontal Tolerance values

Revolutions per minute (RPM)

Offset B Offset A

licensed to: NOT LICENSED

Acceptable 30.0 [mils] 30.0 [mils]

Page 3 of 3