Diy Beading Magazine Issue26

Tap & Hold the screen to show the top bar HOME Tap to return to the app home page

How to use this app? Swipe Horizontally to go to the next page

Tap & Hold the screen to show the top bar

Swipe Horizontally to quickly navigate pages Tap selected page to View

CONTENTS

EDITOR’S NOTE

FEATURED JEWELRY MAKING TUTORIALS • Sparkling by Lorraine Coetzee • “Bold Fun” Odd Pevote Cuff/Bracelet Pattern by Lorraine Coetzee • DIY: Statement Necklace by Brandhyze Stanley • Festival of Lights by Soft Flex Company • Solana Beadweaving Pendant Ring by Bianc van der Molen • Lady Evanthia by Blanc van der Molen • Pinnacle Lace Earrings by Renee Kovnesky • Dazzling in the New Year

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

RECOMMENDED JEWELRY MAKING SUPPLIES • • • •

Pavé Thread Ring Sun Pendant Need a Bead Now Bead, turquoise (imitation)

FEATURED JEWELRY MAKING TUTORIALS • Diamond Sparkle Necklace Pattern by Renee Kovnesky • Friendship Bracelet Pattern by leva Bambale

RECOMMENDED READINGS • Bead Metamorphosis: Exquisite Jewelry from Custom Components • Stitching with Two-Hole Shaped Beads Need a Bead Now • Creative Beading Vol. 9: The Best Projects from a Year of Bead&Button Magazine • The Beading Answer Book

FEATURED JEWELRY MAKING TUTORIALS • Elegantia Pendant by Antonella Di Spigno

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Welcome to DIY Beading Magazine

Y

ear 2015 is here! New beginnings, new ideas, new beaded handmade jewelries to wear! In this issue of DIY Beading Magazine, we are bringing you new ideas and designs for making handmade jewelries. Just like firecrackers, signifying New Year, you will see jewelry designs showing off bright colors and sparkles. Do not be afraid to wear vibrant colored jewelries and do not be afraid to wear eye-catching designs. This year is your year to be fashionable and get noticed with bright and sparkling jewelries you have personally created.

Jane Chew Blog: www.handmade-jewelry-club.com Lessons: www.diylessons.org Membership: www.diybeadingclub.com

Join The Fun!

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SPARKLING

Brick Stitch 25 Columns (1.75") at the widest point x 129 Rows (7.08") with toggle clasp All Rights Reserved to Trinity Designer Jewelry It may NOT be reprinted or taught in any manner without my permission. You may sell your finished work, but please give me credit. [email protected] Please check the last page for tips and links.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SPARKLING

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SPARKLING

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SPARKLING This pattern doesn't come with word charts, since it is shaped brick stitch and the word charts doesn't show increases and decreases. This link will take you to a site where you can learn how to do peyote and brick stitches, free. http://www.uniquebeadedjewelry.com/stitchinfo/payote.html This link will show you how to do "Increase Peyote Stitch" www.youtube.com/watch?v=HV0mfyQDIgg This link will show you how to do "Decrease Peyote Stitch" www.youtube.com/watch?v=2rc1GKumO8Q

This link will show you how to do square stitch: www.youtube.com/watch?v=1pnhK_Gdex4 If you have any queries, please contact me at [email protected] Happy beading Lorraine

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Width: 1.25" Height: 6.50" Columns: 23 Rows: 202 Bead Count: 2301 Color Count: 12 Stitch: Peyote This is a peyote stitch bracelet pattern. Please note that the instructions for the toggle ring is not included in this pattern since it is a custom made ring by my bead fairy who tested the pattern. This pattern is designed for the use of Delica #11 beads and nylon thread with #10 or #12 beading needle. Instructions for peyote stitch are not included.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Delica, size 11 bead colours and quantities as per graph.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Row 1&2 (L) (7)A, (2)B, (2)C, (1)B, (2)C, (2)B, (7)A Row 3 (R) (3)A, (1)B, (1)C, (2)B, (1)C, (1)B, (3)A Row 4 (L) (2)A, (1)B, (1)C, (1)B, (1)C, (1)B, (1)C, (1)B, (2)A Row 5 (R) (2)A, (1)B, (1)C, (1)B, (2)C, (1)B, (1)C, (1)B, (2)A Row 6 (L) (1)A, (1)B, (1)C, (1)B, (1)C, (1)B, (1)C, (1)B, (1)C, (1)B, (1)A Row 7 (R) (1)A, (1)B, (1)C, (1)B, (1)C, (2)B, (1)C, (1)B, (1)C, (1)B, (1)A Row 8 (L) (1)B, (1)C, (1)D, (1)C, (1)B, (1)C, (1)B, (1)C, (1)D, (1)C, (1)B Row 9 (R) (1)B, (1)C, (2)D, (1)B, (2)C, (1)B, (2)D, (1)C, (1)B Row 10 (L) (1)C, (1)D, (1)E, (1)D, (1)C, (1)B, (1)C, (1)D, (1)E, (1)D, (1)C Row 11 (R) (1)C, (1)D, (2)E, (1)D, (2)B, (1)D, (2)E, (1)D, (1)C Row 12 (L) (1)D, (1)E, (1)F, (1)E, (1)D, (1)C, (1)D, (1)E, (1)F, (1)E, (1)D Row 13 (R) (1)D, (1)E, (1)F, (1)I, (1)E, (2)D, (1)E, (1)I, (1)F, (1)E, (1)D Row 14 (L) (1)E, (1)F, (2)I, (1)E, (1)D, (1)E, (2)I, (1)F, (1)E Row 15 (R) (1)E, (1)F, (1)I, (1)F, (1)B, (2)E, (1)B, (1)F, (1)I, (1)F, (1)E

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Row 16 (L) (1)F, (1)I, (1)G, (1)F, (1)B, (1)E, (1)B, (1)F, (1)G, (1)I, (1)F Row 17 (R) (1)F, (1)I, (1)G, (2)F, (2)B, (2)F, (1)G, (1)I, (1)F Row 18 (L) (1)I, (2)G, (2)F, (1)B, (2)F, (2)G, (1)I Row 19 (R) (1)F, (1)I, (1)G, (2)F, (2)B, (2)F, (1)G, (1)I, (1)F Row 20 (L) (1)F, (1)I, (1)G, (1)F, (1)B, (1)E, (1)B, (1)F, (1)G, (1)I, (1)F Row 21 (R) (1)E, (1)F, (1)I, (1)F, (1)B, (2)E, (1)B, (1)F, (1)I, (1)F, (1)E Row 22 (L) (1)E, (1)F, (2)I, (1)E, (1)D, (1)E, (2)I, (1)F, (1)E Row 23 (R) (1)D, (1)E, (1)F, (1)I, (1)E, (2)D, (1)E, (1)I, (1)F, (1)E, (1)D Row 24 (L) (1)D, (1)E, (1)F, (1)E, (1)D, (1)B, (1)D, (1)E, (1)F, (1)E, (1)D Row 25 (R) (1)B, (1)D, (2)E, (1)D, (2)B, (1)D, (2)E, (1)D, (1)B Row 26 (L) (1)B, (1)D, (1)E, (1)D, (1)B, (1)G, (1)B, (1)D, (1)E, (1)D, (1)B Row 27 (R) (1)G, (1)B, (2)D, (1)B, (2)G, (1)B, (2)D, (1)B, (1)G Row 28 (L) (1)G, (1)B, (1)D, (1)B, (1)G, (1)F, (1)G, (1)B, (1)D, (1)B, (1)G Row 29 (R) (1)F, (1)G, (2)B, (1)G, (2)F, (1)G, (2)B, (1)G, (1)F Row 30 (L) (1)F, (1)G, (1)B, (1)G, (1)F, (1)B, (1)F, (1)G, (1)B, (1)G, (1)F Row 31 (R) (1)B, (1)F, (2)G, (1)F, (2)B, (1)F, (2)G, (1)F, (1)B Row 32 (L) (1)B, (1)F, (1)G, (1)F, (1)B, (1)H, (1)B, (1)F, (1)G, (1)F, (1)B Row 33 (R) (1)H, (1)B, (2)F, (1)B, (2)H, (1)B, (2)F, (1)B, (1)H Row 34 (L) (1)H, (1)B, (1)F, (1)B, (1)H, (1)I, (1)H, (1)B, (1)F, (1)B, (1)H Row 35 (R) (1)I, (1)H, (2)B, (1)H, (2)I, (1)H, (2)B, (1)H, (1)I Row 36 (L) (1)I, (1)H, (1)B, (2)I, (1)B, (1)I, (1)H, (1)B, (1)H, (1)I Row 37 (R) (1)B, (1)I, (2)H, (1)I, (2)B, (2)I, (1)H, (1)I, (1)B Row 38 (L) (1)B, (1)I, (1)H, (1)I, (1)B, (1)J, (1)B, (1)I, (1)H, (1)I, (1)B Row 39 (R) (1)J, (1)B, (2)I, (1)B, (2)J, (1)B, (2)I, (1)B, (1)J Row 40 (L) (1)J, (1)B, (1)I, (1)B, (1)J, (1)K, (1)J, (1)B, (1)I, (1)B, (1)J Row 41 (R) (1)K, (1)J, (2)B, (1)J, (2)K, (1)J, (2)B, (1)J, (1)K Row 42 (L) (1)K, (1)J, (1)B, (1)J, (1)K, (1)B, (1)K, (1)J, (1)B, (1)J, (1)K Row 43 (R) (1)B, (1)K, (2)J, (1)K, (2)B, (1)K, (2)J, (1)K, (1)B Row 44 (L) (1)B, (1)K, (1)J, (1)K, (1)B, (1)C, (1)B, (1)K, (1)J, (1)K, (1)B Row 45 (R) (1)C, (1)B, (2)K, (1)B, (2)C, (1)B, (2)K, (1)B, (1)C

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Row 46 (L) (1)C, (1)B, (1)K, (1)B, (1)C, (1)L, (1)C, (1)B, (1)K, (1)B, (1)C Row 47 (R) (1)L, (1)C, (2)B, (1)C, (2)L, (1)C, (2)B, (1)C, (1)L Row 48 (L) (1)L, (1)C, (1)B, (1)C, (1)L, (1)A, (1)L, (1)C, (1)B, (1)C, (1)L Row 49 (R) (1)A, (1)L, (2)C, (1)L, (2)A, (1)L, (2)C, (1)L, (1)A Row 50 (L) (1)A, (1)L, (1)C, (1)L, (1)A, (1)G, (1)A, (1)L, (1)C, (1)L, (1)A Row 51 (R) (2)A, (2)L, (1)A, (2)G, (1)A, (2)L, (2)A Row 52 (L) (2)A, (1)L, (1)A, (1)G, (1)F, (1)G, (1)A, (1)L, (2)A Row 53 (R) (4)A, (1)G, (2)F, (1)G, (4)A Row 54 (L) (3)A, (1)G, (1)F, (1)B, (1)F, (1)G, (3)A Row 55 (R) (3)A, (1)G, (1)F, (2)B, (1)F, (1)G, (3)A Row 56 (L) (2)A, (1)G, (1)F, (1)B, (1)J, (1)B, (1)F, (1)G, (2)A Row 57 (R) (3)A, (1)F, (1)B, (2)J, (1)B, (1)F, (3)A Row 58 (L) (2)A, (1)G, (1)B, (1)J, (1)L, (1)J, (1)B, (1)G, (2)A Row 59 (R) (3)A, (1)F, (1)B, (2)J, (1)B, (1)F, (3)A Row 60 (L) (2)A, (1)I, (1)H, (1)B, (1)J, (1)B, (1)H, (1)I, (2)A Row 61 (R) (2)A, (1)I, (2)H, (2)B, (2)H, (1)I, (2)A Row 62 (L) (1)A, (1)I, (1)H, (1)B, (1)H, (1)B, (1)H, (1)B, (1)H, (1)I, (1)A Row 63 (R) (1)A, (1)I, (1)H, (2)B, (2)H, (2)B, (1)H, (1)I, (1)A Row 64 (L) (1)I, (1)H, (1)B, (1)E, (3)B, (1)E, (1)B, (1)H, (1)I Row 65 (R) (1)I, (1)H, (1)B, (2)E, (2)B, (2)E, (1)B, (1)H, (1)I Row 66 (L) (1)H, (1)B, (1)E, (1)D, (1)E, (1)B, (1)E, (1)D, (1)E, (1)B, (1)H Row 67 (R) (1)H, (1)B, (1)E, (2)D, (2)E, (2)D, (1)E, (1)B, (1)H Row 68 (L) (1)H, (1)B, (1)E, (1)D, (1)E, (1)B, (1)E, (1)D, (1)E, (1)B, (1)H Row 69 (R) (1)I, (1)H, (1)B, (2)E, (2)B, (2)E, (1)B, (1)H, (1)I Row 70 (L) (1)I, (1)H, (1)B, (1)E, (3)B, (1)E, (1)B, (1)H, (1)I Row 71 (R) (1)A, (1)I, (1)H, (2)B, (2)H, (2)B, (1)H, (1)I, (1)A Row 72 (L) (1)A, (1)I, (1)H, (1)B, (1)H, (1)B, (1)H, (1)B, (1)H, (1)I, (1)A Row 73 (R) (2)A, (1)I, (2)H, (2)B, (2)H, (1)I, (2)A Row 74 (L) (2)A, (1)I, (1)H, (1)B, (1)J, (1)B, (1)H, (1)I, (2)A Row 75 (R) (3)A, (1)F, (1)B, (2)J, (1)B, (1)F, (3)A

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Row 76 (L) (2)A, (1)G, (1)B, (1)J, (1)L, (1)J, (1)B, (1)G, (2)A Row 77 (R) (1)I, (2)A, (1)F, (1)B, (2)J, (1)B, (1)F, (2)A, (1)I Row 78 (L) (1)I, (1)A, (1)G, (1)F, (1)B, (1)J, (1)B, (1)F, (1)G, (1)A, (1)I Row 79 (R) (1)H, (1)I, (1)A, (1)G, (1)F, (2)B, (1)F, (1)G, (1)A, (1)I, (1)H Row 80 (L) (1)H, (1)I, (1)A, (1)G, (1)F, (1)B, (1)F, (1)G, (1)A, (1)I, (1)H Row 81 (R) (1)B, (1)H, (1)I, (1)A, (1)G, (2)F, (1)G, (1)A, (1)I, (1)H, (1)B Row 82 (L) (1)B, (1)H, (1)I, (1)A, (1)G, (1)F, (1)G, (1)A, (1)I, (1)H, (1)B Row 83 (R) (2)B, (1)H, (1)I, (1)A, (2)G, (1)A, (1)I, (1)H, (2)B Row 84 (L) (1)B, (1)H, (1)I, (1)D, (1)A, (1)G, (1)A, (1)D, (1)I, (1)H, (1)B Row 85 (R) (1)B, (1)H, (1)I, (2)D, (2)A, (2)D, (1)I, (1)H, (1)B Row 86 (L) (1)H, (1)I, (1)D, (1)E, (1)D, (1)A, (1)D, (1)E, (1)D, (1)I, (1)H Row 87 (R) (1)H, (1)I, (1)D, (2)E, (2)D, (2)E, (1)D, (1)I, (1)H Row 88 (L) (1)I, (1)D, (1)E, (1)B, (1)E, (1)D, (1)E, (1)B, (1)E, (1)D, (1)I Row 89 (R) (1)I, (1)A, (1)E, (2)B, (2)E, (2)B, (1)E, (1)A, (1)I Row 90 (L) (1)A, (1)D, (1)B, (1)C, (1)B, (1)E, (1)B, (1)C, (1)B, (1)D, (1)A Row 91 (R) (2)A, (1)E, (2)C, (2)B, (2)C, (1)E, (2)A Row 92 (L) (1)A, (1)D, (1)B, (1)L, (1)C, (1)B, (1)C, (1)L, (1)B, (1)D, (1)A Row 93 (R) (2)A, (1)E, (1)C, (1)L, (2)C, (1)L, (1)C, (1)E, (2)A Row 94 (L) (1)A, (1)D, (1)B, (2)L, (1)B, (2)L, (1)B, (1)D, (1)A Row 95 (R) (1)A, (1)D, (1)E, (1)C, (1)L, (2)C, (1)L, (1)C, (1)E, (1)D, (1)A Row 96 (L) (1)D, (1)E, (1)B, (1)C, (1)L, (1)B, (1)L, (1)C, (1)B, (1)E, (1)D Row 97 (R) (1)D, (1)E, (2)B, (4)C, (2)B, (1)E, (1)D Row 98 (L) (1)E, (1)B, (1)C, (1)B, (1)C, (1)B, (1)C, (1)B, (1)C, (1)B, (1)E Row 99 (R) (1)D, (1)B, (2)C, (4)B, (2)C, (1)B, (1)D Row 100 (L) (1)E, (1)C, (1)L, (1)C, (1)B, (1)F, (1)B, (1)C, (1)L, (1)C, (1)E Row 101 (R) (1)D, (1)B, (2)L, (1)C, (2)F, (1)C, (2)L, (1)B, (1)D Row 102 (L) (1)E, (1)C, (2)L, (1)B, (1)G, (1)B, (2)L, (1)C, (1)E Row 103 (R) (1)D, (1)B, (2)L, (1)C, (2)F, (1)C, (2)L, (1)B, (1)D Row 104 (L) (1)E, (1)C, (1)L, (1)C, (1)B, (1)F, (1)B, (1)C, (1)L, (1)C, (1)E Row 105 (R) (1)D, (1)B, (2)C, (4)B, (2)C, (1)B, (1)D

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Row 106 (L) (1)E, (1)B, (1)C, (1)B, (1)C, (1)B, (1)C, (1)B, (1)C, (1)B, (1)E Row 107 (R) (1)D, (1)E, (2)B, (4)C, (2)B, (1)E, (1)D Row 108 (L) (1)D, (1)E, (1)B, (1)C, (1)L, (1)B, (1)L, (1)C, (1)B, (1)E, (1)D Row 109 (R) (1)A, (1)D, (1)E, (1)C, (1)L, (2)C, (1)L, (1)C, (1)E, (1)D, (1)A Row 110 (L) (1)A, (1)D, (1)B, (2)L, (1)B, (2)L, (1)B, (1)D, (1)A Row 111 (R) (2)A, (1)E, (1)C, (1)L, (2)C, (1)L, (1)C, (1)E, (2)A Row 112 (L) (1)A, (1)D, (1)B, (1)L, (1)C, (1)B, (1)C, (1)L, (1)B, (1)D, (1)A Row 113 (R) (2)A, (1)E, (2)C, (2)B, (2)C, (1)E, (2)A Row 114 (L) (1)A, (1)D, (1)B, (1)C, (1)B, (1)E, (1)B, (1)C, (1)B, (1)D, (1)A Row 115 (R) (1)I, (1)A, (1)E, (2)B, (2)E, (2)B, (1)E, (1)A, (1)I Row 116 (L) (1)I, (1)D, (1)E, (1)B, (1)E, (1)D, (1)E, (1)B, (1)E, (1)D, (1)I Row 117 (R) (1)H, (1)I, (1)D, (2)E, (2)D, (2)E, (1)D, (1)I, (1)H Row 118 (L) (1)H, (1)I, (1)D, (1)E, (1)D, (1)A, (1)D, (1)E, (1)D, (1)I, (1)H Row 119 (R) (1)B, (1)H, (1)I, (2)D, (2)A, (2)D, (1)I, (1)H, (1)B Row 120 (L) (1)B, (1)H, (1)I, (1)D, (1)A, (1)G, (1)A, (1)D, (1)I, (1)H, (1)B Row 121 (R) (2)B, (1)H, (1)I, (1)A, (2)G, (1)A, (1)I, (1)H, (2)B Row 122 (L) (1)B, (1)H, (1)I, (1)A, (1)G, (1)F, (1)G, (1)A, (1)I, (1)H, (1)B Row 123 (R) (1)B, (1)H, (1)I, (1)A, (1)G, (2)F, (1)G, (1)A, (1)I, (1)H, (1)B Row 124 (L) (1)H, (1)I, (1)A, (1)G, (1)F, (1)B, (1)F, (1)G, (1)A, (1)I, (1)H Row 125 (R) (1)H, (1)I, (1)A, (1)G, (1)F, (2)B, (1)F, (1)G, (1)A, (1)I, (1)H Row 126 (L) (1)I, (1)A, (1)G, (1)F, (1)B, (1)J, (1)B, (1)F, (1)G, (1)A, (1)I Row 127 (R) (1)I, (2)A, (1)F, (1)B, (2)J, (1)B, (1)F, (2)A, (1)I Row 128 (L) (2)A, (1)G, (1)B, (1)J, (1)L, (1)J, (1)B, (1)G, (2)A Row 129 (R) (3)A, (1)F, (1)B, (2)J, (1)B, (1)F, (3)A Row 130 (L) (2)A, (1)I, (1)H, (1)B, (1)J, (1)B, (1)H, (1)I, (2)A Row 131 (R) (2)A, (1)I, (2)H, (2)B, (2)H, (1)I, (2)A Row 132 (L) (1)A, (1)I, (1)H, (1)B, (1)H, (1)B, (1)H, (1)B, (1)H, (1)I, (1)A Row 133 (R) (1)A, (1)I, (1)H, (2)B, (2)H, (2)B, (1)H, (1)I, (1)A Row 134 (L) (1)I, (1)H, (1)B, (1)E, (3)B, (1)E, (1)B, (1)H, (1)I Row 135 (R) (1)I, (1)H, (1)B, (2)E, (2)B, (2)E, (1)B, (1)H, (1)I

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Row 136 (L) (1)H, (1)B, (1)E, (1)D, (1)E, (1)B, (1)E, (1)D, (1)E, (1)B, (1)H Row 137 (R) (1)H, (1)B, (1)E, (2)D, (2)E, (2)D, (1)E, (1)B, (1)I Row 138 (L) (1)H, (1)B, (1)E, (1)D, (1)E, (1)B, (1)E, (1)D, (1)E, (1)B, (1)H Row 139 (R) (1)I, (1)H, (1)B, (2)E, (2)B, (2)E, (1)B, (1)H, (1)I Row 140 (L) (1)I, (1)H, (1)B, (1)E, (3)B, (1)E, (1)B, (1)H, (1)I Row 141 (R) (1)A, (1)I, (1)H, (2)B, (2)H, (2)B, (1)H, (1)I, (1)A Row 142 (L) (1)A, (1)I, (1)H, (1)B, (1)H, (1)B, (1)H, (1)B, (1)H, (1)I, (1)A Row 143 (R) (2)A, (1)I, (2)H, (2)B, (2)H, (1)I, (2)A Row 144 (L) (2)A, (1)I, (1)H, (1)B, (1)J, (1)B, (1)H, (1)I, (2)A Row 145 (R) (3)A, (1)F, (1)B, (2)J, (1)B, (1)F, (3)A Row 146 (L) (2)A, (1)G, (1)B, (1)J, (1)L, (1)J, (1)B, (1)G, (2)A Row 147 (R) (3)A, (1)F, (1)B, (2)J, (1)B, (1)F, (3)A Row 148 (L) (2)A, (1)G, (1)F, (1)B, (1)J, (1)B, (1)F, (1)G, (2)A Row 149 (R) (3)A, (1)G, (1)F, (2)B, (1)F, (1)G, (3)A Row 150 (L) (3)A, (1)G, (1)F, (1)B, (1)F, (1)G, (3)A Row 151 (R) (4)A, (1)G, (2)F, (1)G, (4)A Row 152 (L) (2)A, (1)L, (1)A, (1)G, (1)F, (1)G, (1)A, (1)L, (2)A Row 153 (R) (2)A, (2)L, (1)A, (2)G, (1)A, (2)L, (2)A Row 154 (L) (1)A, (1)L, (1)C, (1)L, (1)A, (1)G, (1)A, (1)L, (1)C, (1)L, (1)A Row 155 (R) (1)A, (1)L, (2)C, (1)L, (2)A, (1)L, (2)C, (1)L, (1)A Row 156 (L) (1)L, (1)C, (1)B, (1)C, (1)L, (1)A, (1)L, (1)C, (1)B, (1)C, (1)L Row 157 (R) (1)L, (1)C, (2)B, (1)C, (2)L, (1)C, (2)B, (1)C, (1)L Row 158 (L) (1)C, (1)B, (1)K, (1)B, (1)C, (1)L, (1)C, (1)B, (1)K, (1)B, (1)C Row 159 (R) (1)C, (1)B, (2)K, (1)B, (2)C, (1)B, (2)K, (1)B, (1)C Row 160 (L) (1)B, (1)K, (1)J, (1)K, (1)B, (1)C, (1)B, (1)K, (1)J, (1)K, (1)B Row 161 (R) (1)B, (1)K, (2)J, (1)K, (2)B, (1)K, (2)J, (1)K, (1)B Row 162 (L) (1)K, (1)J, (1)B, (1)J, (1)K, (1)B, (1)K, (1)J, (1)B, (1)J, (1)K Row 163 (R) (1)K, (1)J, (2)B, (1)J, (2)K, (1)J, (2)B, (1)J, (1)K Row 164 (L) (1)J, (1)B, (1)I, (1)B, (1)J, (1)K, (1)J, (1)B, (1)I, (1)B, (1)J Row 165 (R) (1)J, (1)B, (2)I, (1)B, (2)J, (1)B, (2)I, (1)B, (1)J

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Row 166 (L) (1)B, (1)I, (1)H, (1)I, (1)B, (1)J, (1)B, (1)I, (1)H, (1)I, (1)B Row 167 (R) (1)B, (1)I, (2)H, (1)I, (2)B, (1)I, (2)H, (1)I, (1)B Row 168 (L) (1)I, (1)H, (1)B, (1)H, (1)I, (1)B, (1)I, (1)H, (1)B, (1)H, (1)I Row 169 (R) (1)I, (1)H, (2)B, (1)H, (2)I, (1)H, (2)B, (1)H, (1)I Row 170 (L) (1)H, (1)B, (1)F, (1)B, (1)H, (1)I, (1)H, (1)B, (1)F, (1)B, (1)H Row 171 (R) (1)H, (1)B, (2)F, (1)B, (2)H, (1)B, (2)F, (1)B, (1)H Row 172 (L) (1)B, (1)F, (1)G, (1)F, (1)B, (1)H, (1)B, (1)F, (1)G, (1)F, (1)B Row 173 (R) (1)B, (1)F, (3)G, (2)B, (1)F, (3)G, (1)B Row 174 (L) (1)F, (1)G, (1)B, (1)G, (1)F, (1)B, (1)F, (1)G, (1)B, (1)G, (1)F Row 175 (R) (1)F, (1)G, (2)B, (1)G, (2)F, (1)G, (2)B, (1)G, (1)F Row 176 (L) (1)G, (1)B, (1)D, (1)B, (1)G, (1)F, (1)G, (1)B, (1)D, (1)B, (1)G Row 177 (R) (1)G, (1)B, (2)D, (1)B, (2)G, (1)B, (2)D, (1)B, (1)G Row 178 (L) (1)B, (1)D, (1)E, (1)D, (1)B, (1)G, (1)B, (1)D, (1)E, (1)D, (1)B Row 179 (R) (1)B, (1)D, (2)E, (1)D, (2)B, (1)D, (2)E, (1)D, (1)B Row 180 (L) (1)D, (1)E, (1)F, (1)E, (1)D, (1)B, (1)D, (1)E, (1)F, (1)E, (1)D Row 181 (R) (1)D, (1)E, (1)F, (1)I, (1)E, (2)D, (1)E, (1)I, (1)F, (1)E, (1)D Row 182 (L) (1)E, (1)F, (2)I, (1)E, (1)D, (1)E, (2)I, (1)F, (1)E Row 183 (R) (1)E, (1)F, (1)I, (1)F, (1)B, (2)E, (1)B, (1)F, (1)I, (1)F, (1)E Row 184 (L) (1)F, (1)I, (1)G, (1)F, (1)B, (1)E, (1)B, (1)F, (1)G, (1)I, (1)F Row 185 (R) (1)F, (1)I, (1)G, (2)F, (2)B, (2)F, (1)G, (1)I, (1)F Row 186 (L) (1)I, (2)G, (2)F, (1)B, (2)F, (2)G, (1)I Row 187 (R) (1)F, (1)I, (1)G, (2)F, (2)B, (2)F, (1)G, (1)I, (1)F Row 188 (L) (1)F, (1)I, (1)G, (1)F, (1)B, (1)E, (1)B, (1)F, (1)G, (1)I, (1)F Row 189 (R) (1)E, (1)F, (1)I, (1)F, (1)B, (2)E, (1)B, (1)F, (1)I, (1)F, (1)E Row 190 (L) (1)E, (1)F, (2)I, (1)E, (1)D, (1)E, (2)I, (1)F, (1)E Row 191 (R) (1)D, (1)E, (1)F, (1)I, (1)E, (2)D, (1)E, (1)I, (1)F, (1)E, (1)D Row 192 (L) (1)D, (1)E, (1)F, (1)E, (1)D, (1)C, (1)D, (1)E, (1)F, (1)E, (1)D Row 193 (R) (1)C, (1)D, (2)E, (1)D, (2)B, (1)D, (2)E, (1)D, (1)C Row 194 (L) (1)C, (1)D, (1)E, (1)D, (1)C, (1)B, (1)C, (1)D, (1)E, (1)D, (1)C Row 195 (R) (1)B, (1)C, (2)D, (1)B, (2)C, (1)B, (2)D, (1)C, (1)B

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Row 196 (L) (1)B, (1)C, (1)D, (1)C, (1)B, (1)C, (1)B, (1)C, (1)D, (1)C, (1)B Row 197 (R) (1)A, (1)B, (1)C, (1)B, (1)C, (2)B, (1)C, (1)B, (1)C, (1)B, (1)A Row 198 (L) (1)A, (1)B, (1)C, (1)B, (1)C, (1)B, (1)C, (1)B, (1)C, (1)B, (1)A Row 199 (R) (2)A, (1)B, (1)C, (1)B, (2)C, (1)B, (1)C, (1)B, (2)A Row 200 (L) (2)A, (1)B, (1)C, (1)B, (1)C, (1)B, (1)C, (1)B, (2)A Row 201 (R) (3)A, (1)B, (1)C, (2)B, (1)C, (1)B, (3)A Row 202 (L) (3)A, (1)B, (1)C, (1)B, (1)C, (1)B, (3)A Row 203 (R) (12)Blank Row 204 (L) (11)Blank Row 205 (R) (12)Blank Row 206 (L) (11)Blank Row 207 (R) (3)Blank, (1)B, (1)F, (2)B, (1)F, (1)B, (3)Blank Row 208 (L) (2)Blank, (1)C, (1)B, (1)F, (1)B, (1)F, (1)B, (1)C, (2)Blank Row 209 (R) (3)Blank, (1)C, (1)B, (2)F, (1)B, (1)C, (3)Blank Row 210 (L) (2)Blank, (1)E, (1)C, (1)B, (1)F, (1)B, (1)C, (1)E, (2)Blank Row 211 (R) (3)Blank, (1)E, (1)C, (2)B, (1)C, (1)E, (3)Blank Row 212 (L) (2)Blank, (1)C, (1)E, (1)C, (1)B, (1)C, (1)E, (1)C, (2)Blank Row 213 (R) (3)Blank, (1)C, (1)E, (2)C, (1)E, (1)C, (3)Blank Row 214 (L) (2)Blank, (1)B, (1)C, (1)E, (1)C, (1)E, (1)C, (1)B, (2)Blank Row 215 (R) (3)Blank, (1)B, (1)C, (2)E, (1)C, (1)B, (3)Blank Row 216 (L) (2)Blank, (1)F, (1)B, (1)C, (1)E, (1)C, (1)B, (1)F, (2)Blank Row 217 (R) (3)Blank, (1)F, (1)B, (2)C, (1)B, (1)F, (3)Blank Row 218 (L) (2)Blank, (1)B, (1)F, (1)B, (1)C, (1)B, (1)F, (1)B, (2)Blank Row 219 (R) (12)Blank Row 220 (L) (11)Blank The bracelet ends at row 202. Row 207 onwards are for the toggle bar. Stitch it from the graph, zip into a bar and attach to one end of the bracelet band. Make a loop for the bar on the other side of the band with 18 beads and 1 row peyote stitch (colour of your choice)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

About the Author

Lorraine Coetzee For many years Lorraine hand-made boutique styled clothes and only started making jewelry around 2007 as a hobby. Lorraine started stringing glass beads and pearls and soon found herself looking at more challenging ways of working with beads and other mediums. Her creative inspiration comes primarily from the wonder of nature and the glorious colors all around. Her favorite materials to work with are glass seed beads (Delica's), Swarovski crystals, Swarovski pearls together with high quality bead embroidery equipment and tools. I'm learning it's more important to work smarter than harder and I have come to realise it's just as easy to think Big as it is to think Small. Growth manifests itself first from within oneself. I believe my designs reflect my grown in confidence and every day I want to be better and more than yesterday. Instant Digital Download Patterns available at www.Etsy.com/shop/TrinityDJ Ready-To-Wear Beaded Bracelets & Necklaces available at www.Etsy/shop/TrinityDJBoutique Facebook Page https://www.facebook.com/Trinity.Designer.Jewellery

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

DIY STATEMENT Necklace

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

DIY STATEMENT Necklace

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

DIY STATEMENT Necklace

About the Author

Brandhyze Stanley Brandhyze Stanley is the chief voice of the award winning blog, Frugal-nomics.com; a platform designed to share with women how to live and look fabulous on a dime. A DIY girl at heart—Brandhyze has been featured on The View, The Early Show, The Today Show, InStyle Magazine, Essence Magazine, and MTVStyle. A Wilhelmina Model for over a decade, with a Business Degree from Loyola University Chicago, Brandhyze is the resident DIYer for Mood Fabrics (store from Project Runway); provides DIY content to the popular How-To Site, eHow; and has been a contributor for the Huffington Post, Yahoo Finance, Super Money, Good Housekeeping, and Newsday Westchester, to name a few. Brandhyze is a huge thrifter and a lover of all good deals, follow her on Twitter @MyFrugalnomics and on Facebook at Facebook.com/Frugalnomics.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Every Month, Learn How To Make Your Own Jewelry

R 1 Issue Per Month

R R

R R R R

Jewelry Making Tips, Lessons and News From Jewelry Artists Techniques Taught include Beading, Stringing, Wireworks, Chainmaille and many more! Interactive lessons in pictorial step by step guides and videos! Jewelry Trend Beading Resources Jewelry Business Tips

Get Started, Click The Subscribe Button Below

Subscribe

Festival of Lights

• •

• • • • • • • • • • • • •

Materials: Trios Festival of Lights wire set (White Quartz, Dark Blue Lapis, 925 Sterling Silver) 27mm Sterling Silver Square Swirl Toggle Clasp - 1 clasp set 2mm x 2mm Sterling Silver Crimp Tubes - 34 crimps 3mm Sterling Silver Crimp Covers - 34 crimps 2" Sterling Silver Ball End Head Pins - 33 head pins 3mm Sterling Silver Round Beads - 47 rounds 4mm Crystallized Swarovski Elements Light Sapphire Satin Bicones - 48 light sapphire satin bicones 4mm Crystallized Swarovski Elements Crystal Bicones 48 crystal bicones 4mm Crystallized Swarovski Elements Montana Bicones 48 Montana bicones 11x16mm Crystallized Swarovski Elements Crystal Baroque Drops - 8 drops 15x26mm Crystallized Swarovski Elements Crystal Leaf Pendants - 6 leaf pendants 12x24mm Crystallized Swarovski Elements Ocean Blue Flat Teardrop Pendant - 1 teardrop pendant 6mm Crystallized Swarovski Elements Natural White Pearls - 24 natural white pearls 6mm Crystallized Swarovski Elements Night Blue Pearls 13 night blue pearls 8mm Crystallized Swarovski Elements Night Blue Pearls 12 night blue pearls

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Festival of Lights • • • • • •

Cutters Chain-nose pliers Round-nose pliers Flat-nose pliers Crimping pliers Bead Stoppers

Tools:

Beads and findings available from Beadfx.com.

Finished Size: 19" Instructions:

1. Use 1 head pin to string 1 natural white pearl and form a wire wrapped loop. Repeat entire step 23 times for a total of 24 natural white pearl dangles. Set aside. 2. Use 1 head pin to string 1 night blue 6mm pearl and form a wire wrapped loop. Repeat entire step 5 times for a total of 6 night blue 6mm dangles. Set aside. 3. Use 1 head pin to string 1 night blue 8mm pearl and form a wire wrapped loop. Repeat entire step 3 times for a total of 4 night blue 8mm dangles. Set aside.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Festival of Lights 4. Use 4" of 925 Sterling Silver wire to string 1 crimp tube and the flat teardrop pendant. Pass back through the tube, leaving a loop of wire large enough for the pendant to move freely, and crimp. Cover the tube with a crimp cover. Use the other end of the wire to string 1 night blue 6mm pearl and 1 crimp tube. Pass back through the tube, leaving about a 3mm loop of wire, and crimp. Cover the tube with a crimp cover. Set aside. 5. Use 4" of Dark Blue Lapis wire to string 1 crimp tube and 1 leaf pendant. Pass back through the tube, leaving a loop of wire large enough for the pendant to move freely, and crimp. Cover the tube with a crimp cover. Use the other end of the wire to string 1 night blue 6mm pearl and 1 crimp tube. Pass back through the tube, leaving about a 3mm loop of wire, and crimp. Cover the tube with a crimp cover. Set aside. Repeat entire step 5 times for a total of 6 leaf dangles. 6. Use 4" of White Quartz wire to string 1 crimp tube and 1 baroque drop. Pass back through the tube, leaving a loop of wire large enough for the drop to move freely, and crimp. Cover the tube with a crimp cover. Use the other end of the wire to string 1 night blue 8mm pearl and 1 crimp tube. Pass back through the tube, leaving about a 3mm loop of wire, and crimp. Cover the tube with a crimp cover. Set aside. Repeat entire step 7 times for a total of 8 baroque dangles. 7. Cut 23" of Dark Blue Lapis wire. Place a Bead Stopper on one end of the wire. Use the other end of the wire to string {1 crystal bicone, 1 silver round, 1 crystal bicone, 1 night blue 8mm dangle, 1 crystal bicone, 1 silver round, 1 crystal bicone, and 1 night blue 6mm dangle} twice. String {1 crystal bicone, 1 silver round, 1 crystal bicone, 1 baroque dangle, 1 crystal bicone, 1 silver round, 1 crystal bicone, and 1 leaf dangle} four times. String 1 crystal bicone, 1 silver round, 1 crystal BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Festival of Lights bicone, 1 baroque dangle, 1 crystal bicone, 1 silver round, 1 crystal bicone, the flat teardrop dangle, 1 crystal bicone, 1 silver round, 1 crystal bicone, and 1 baroque dangle. String {1 crystal bicone, 1 silver round, 1 crystal bicone, 1 leaf dangle, 1 crystal bicone, 1 silver round, 1 crystal bicone, and 1 baroque dangle} twice. String {1 crystal bicone, 1 silver round, 1 crystal bicone, 1 night blue 6mm dangle, 1 crystal bicone, 1 silver round, 1 crystal bicone, and 1 night blue 8mm dangle} twice. String 1 crystal bicone, 1 silver round, and 1 crystal bicone. Place a Bead Stopper on the end of the wire.

8. Cut 23" of White Quartz wire. Place a Bead Stopper on one end of the wire. Use the other end of the wire to string {1 natural white dangle, 1 Montana bicone, 1 silver round, and 1 Montana bicone} 23 times. String 1 natural white dangle. Place a Bead Stopper on one end of the wire. 9. Cut 23" of 925 Sterling Silver wire. Remove the Bead Stoppers from one end each of the White Quartz and Dark Blue Lapis wires. 10. Use all three wires to string 1 crimp tube. Place the tube 2" from the wire ends and crimp. Cover the tube with a crimp cover. Trim the tails of the White Quartz and Dark Blue Lapis wires. Use the 925 Sterling Silver wire to string 1 crimp tube and one half of the clasp. Pass back through the tube and crimp. Cover the tube with a crimp cover. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Festival of Lights 11. Use the 925 Sterling Silver wire to pass through the first dangle on the Dark Blue Lapis wire and string 1 light sapphire satin bicone. Pass the 925 Sterling Silver wire through the first dangle on the White Quartz wire and string 1 light sapphire satin bicone. *Pass through the next dangle on the Dark Blue Lapis wire and string 1 light sapphire satin bicone. Pass through the next dangle on the White Quartz wire and string 1 light sapphire satin bicone. Repeat from * for the length of the necklace. Finish by passing through the final dangle on the Dark Blue Lapis wire.

12. Repeat Step 10 for the other end of the necklace, using the other half of the clasp. 13. Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Festival of Lights About the Author

Welcome to Soft Flex Company for all your beading, wire and jewelry making needs.

Make your own jewelry with Soft Flex® beading wire. Learn beading tips, get inspired with free beading projects and do your bead shopping all in one place! Browse useful charts and interesting beading articles, get answers to your jewelry-making questions and learn everything you ever wanted to know about gemstone beads. Shop the best quality beading wire, crimps, clasps, beads and gemstones. Defining Excellence Then and Now - We lead our industry with simply the best products and services. We celebrate our innovative ideas and proudly inspire creativity with our passion to educate. We are dedicated to exceeding the expectations of our customers and are grateful for their continued loyalty. Website: http://www.softflexcompany.com/

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING

The Beads • Ca. 12 gr. 11/0 seedbeads • Ca. 12 gr. 15/0 seedbeads • Ca. 20 gr. Rulla 5x3 mm • 250 x 3 mm firepolished or round beads • 7 (or more) 11x8 mm glass pearl drop* drilled from top to bottom • 11 (or more) 12 mm swarovski rivoli [or similar, just remind yourself that you have to change the amount of beads when you attach the drop] TIP: Adjust the amount of the beads and rivoli’s to the length andwidth of the necklace. For the earrings • • • • • • •

Ca. 5 gr. 11/0 Seed Beads [SB] Ca. 5 gr. 15/0 Seed Beads [SB] Ca. 1 gr. 8/0 Seed Beads [SB] 19 - Preciosa Pellet Beads [PB] 19 - 3 mm Fire Polished Beads [FP3] 01 - 6 mm Czechmates 2-holed lentil bead [LB] 01 - 18 mm LunaSoft cabochon In this tutorial we will be using even-count peyote and the picot stitch. If you aren’t familiar with even-count peyote, don’t worry, I will show you step by step how to make the even-count bezel for this pendant / ring my way :) For now, have fun beading and enjoy!

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING Chapter 1 | Making the bezel Step 1 - Figure 1 String 38 x 11/0 SB, go through all the beads again and form a circle. Come out of the second 11/0 SB you strung.

Step 2 - Figure 2 String on 1 x 11/0 SB, skip the next SB and go through the next SB. Repeat this step for the rest of the round. Step up through the first 11/0 SB you strung and go 2 down so you will come out of a 11/0 SB on the inside. See figure 2 for more clarity. As you can see in figure 2 that you will get a zipper-like effect when you complete your round. Step 3 - Figure 3 Pick up 1 x 15/0 SB and go through the next 11/0 SB that sticks out. Repeat this step for the rest of the round. Go through all the beads you just added for a second time for strength. Come out of a 11/0 SB that sticks out on the outside of your circle. See figure 3 for more clarity.

Step 4 - Figure 4 Pick up 1 x 11/0 SB and go through the next 11/0 SB that sticks out. Repeat this step for the rest of the round. If you find it easier you can also put your LunaSoft cabochon in the bezel at this point. See figure 4

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING Step 5 - Figure 5 and 6 Repeat step 4 for another two times. If you finished each round step up through the first 11/0 SB you strung.

Step 6 - Figure 7 and 8 Pick up 1 x 15/0 SB and go through the next 11/0 SB that sticks out. Keep repeating this step until you have strung the last bead. Step up to the first 15/0 SB you added previously and continue the peyote stitch with the 15/0 SB

Step 7 - Figure 9 When we’ve added the last round of 15/0 SB go through only the 15/0 SB’s you added in the last round. This way you will strengthen the backside and it will sit more tightly.

Step 8 - Figure 10 We will now, without picking up a bead, going to go to a point to where we will start the embellishing. Come out of the second 11/0 SB under 1 x 15/0 SB of step 3 and the 11/0 SB that sits beneath it. See figure 10 for more clarity BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING Chapter 2 | Embellishing Step 1 - Figure 11 Pick up 3 x 15/0 SB and go through the next 11/0 SB of the same peyote row. Repeat this step for the rest of the round. Come out of the second 15/0 SB you strung. This is the picot stitch.

Step 2 - Figure 12 Pick up 1 x FP3 and go through the second 15/0 SB of the second picot. Repeat this step for the rest of the round. Come out of the first FP3 you strung.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING Step 3 - Figure 13 Pick up 1 x 11/0 SB and go through the next FP3. Repeat this step for the rest of the round. Go through the same beads you just added for a second time. Come out of the first 11/0 SB you strung.

Step 4 - Figure 14 Pick up 3 x 11/0 SB and go through the next 11/0 SB you added in step 3. Repeat this step for the rest of the round. NOTE: Do not go through these beads for a second time. It will be harder to go through them later on in this pattern. We will also strengthen this path later on. Come out of the second 11/0 SB of the first picot you strung.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING Step 5 - Figure 15 Pick up 1 x PB and go through the second 11/0 SB of the next picot. Repeat this step for the rest of the round. Go through all the beads, you just added, for a second time and come out of the first PB you strung.

Step 6 - Figure 16 Pick up 1 x 11/0 SB and go through the next PB. Repeat this step for the rest of the round. Go through all the beads, you just added, for a second time. Come out of the first 11/0 SB you strung. NOTE: Keep a tight tension in this step! You will notice that your work will curl backwards!

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING Step 7 - Figure 17 Pick up 5 x 15/0 SB and go through the next 11/0 SB you added in step 6. Repeat this step for the rest of the round. Come out of the third 15/0 SB of the first bow you added in this step.

Step 8A - Figure 18 + 18A Pick up 5 x 15/0 SB and go through the second 11/0 SB you added in step 4. NOTE: If you have trouble coming through the 11/0 SB you can go through the 11/0 SB, from front to back. Don’t pick up a bead and go back, straight next to the 11/0 SB you went through, so you are back on the front again. Go back up through 2 x 15/0 SB of the row you just added. Step 8B - Figure 18 + 18A Pick up 3 x 15/0 SB and go through the third 15/0 SB of step 7. Repeat step 8A and 8B for the rest of the round. Come out of the third 15/0 SB of the first row you added in step 8A.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING

NOTE: If you don’t like the beads to stick out this much you can also alter it by going back up 3 x 15/0 SB instead of 2 x in step 8A. And add two instead of three for step 8B. For the rest it will stay the same but the beads you add in the next step will not be sticking out that much! At the end of this pattern you will find an example of this. Step 9 - Figure 19 + 19A Pick up 1 x 15/0 SB and go up through the 3 x 15/0 SB you added step 8B. (if you used the instructions of the note in the previous step: Pick up 1 x 15/0 SB and go up through 2 x 15/0 SB you added in step 8B) Pick up 1 x 15/0 SB and go through 3 x 15/0 SB you added in step 8A. (if you used the instructions of the note in the previous step: Pick up 1 x 15/0 SB and go through 2 x 15/0 SB you added in step 8A) Repeat this step for the rest of the round and go through all the beads, you just added, for a second time. Come out of the first 15/0 SB you added in this step.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING Chapter 3 | Attaching the bail Step 1 - Figure 20 I’ve rotated figure 20 so that the bail will show in the middle of the diagram Pick up 1 x 15/0 SB - 1 x lentil - 7 x 15/0 SB, go through the second hole of the lentil, pick up 1 x 15/0 and go through the next 15/0 SB on the same line of the 15/0 SB where you are coming out from.

Step 2 - Figure 21

Pick up 3 x 15/0 SB and go through the second 15/0 SB you added in chapter 2 - step 9. Pick up 3 x 15/0 SB and go back through the 15/0 SB you started out from in chapter 3 - step 1. Go through all the beads several times for strength. Then go back into your work and weave back and forth untill your thread sits nice and secure. Snip of your thread.

NOTE: As you notice in this diagram that the beads you added in the previous step aren’t visible on the foreground. I did this so I could show you how the beads and threadpath will lead behind the beads you added in the previous step.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING Step 3 - Figure 22 Last but not least: Attach your bail to the loop we made in step 1.

If it’s gone right, you just finished the Solana pendant! In these next steps you can find the adjustments you need to make if you want to change the pendant into a large statement ring! Don’t worry it won’t take much to change it :)

Chapter 4 | Changing the pendant into a ring! Step 1 - Picture 1 Adjustments of chapter 1: Step 6 - We’ll be going further with the peyote, insert the ring with the platform, and cover the backside of the platform (see picture). As you can see, you will also skip a bead sometimes untill the ring sits snug and tight. NOTE: You can glue the cabochon onto the ring. This will ensure that it will stay together. I chose not to do this as mine is very tight and doesn’t move at all.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING Step 2 - Picture 1 Adjustments in chapter 2: Step 6 - Replace the size 11/0 SB for size 8/0 SB. This will ensure that the ring won’t curl in as much as it does with the pendant. Step 3 - Picture 2 Adjustmends in chapter 2: Step 8 A and B - Follow the instructions below for the adjustemnts of beads: NOTE: If you don’t like the beads to stick out this much you can also alter it by going back up 3 x 15/0 SB instead of 2 x in step 8A. And add two instead of three for step 8B. For the rest it will stay the same but the beads you add in the next step will not be sticking out that much! At the end of this pattern you will find an example of this.

Step 4 - Picture 2 Adjustments in chapter 2: Step 9 - Replace the 15/0 SB for 11/0 SB. Step 9 - Instead of adding a bead between the beads I added an 11/0 SB at the end of the row you added in chapter 2 - step 8A. NOTE: go through the beads several times to ensure that the beads are nice and secure. This was the last adjustment we needed to make the pendant into a ring! And with that to the end of this pattern. I do hope you enjoyed it and I am looking forward to seeing your pendant or ring! You can send finished pictures to [email protected]. Or just add me on facebook and share your post: www.facebook.com/biancmolendesigns. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING

Green / Silver pendant:

Blue / White / Grey pendant:

11/0 Seed Beads TR-11-179 - Transparent Rainbow Emerald Green

11/0 Seed Beads TR-11-143F - Ceylon Frosted Aqua

15/0 Seed Beads TR-15-506 - HigherMetallic June Bug

Firepolised Beads Matte Metallic Aluminium Pellet Beads Labrador Full Silver Czechmates 2-holed lentil Silver LunaSoft Cabochon Crystal

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

15/0 Seed Beads TR-15-611 - MatteColor Opaque Gray Firepolished Beads White Pellet Beads Alabaster

Czechmates 2-holed lentil Alabaster LunaSoft Cabochon Crystal

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING

Orange / Yellow / Hematite pendant: 11/0 Seed Beads TR-11-PF562 - Saffron Galvanized Permanent Finish

Pink / Silver Ring: 11/0 Seed Beads TR-11-PF563F – Matte Galvanized Orchid

15/0 Seed Beads TR-15-42 - Opaque Dandelion

15/0 Seed Beads TR-15-779 - Inside-Color Rainbow Crystal/Salmon Lined

Firepolished Beads Hematite

Firepolished Beads Rosaline

Pellet Beads Hematite

Pellet Beads Labrador Full Silver

Czechmates 2-holed lentil Hematite

LunaSoft Cabochon Black Diamond

LunaSoft Cabochon Orange

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

SOLANA BEADWEAVING PENDANT RING Information Thank you for buying my patterns and making it possible to venture more into the world of making patterns! This pattern is free and you may use this pattern for personal and commercial use. This means that you may sell your finished work, that is made with this pattern, as long as you don’t mass produce. These instructions, both written as photographed or computer made remain exclusively in my copyright. The purchase of this pattern gives no transfer of all rights to the design and pattern. Teaching, sharing or distribution of this pattern (electronic or any other way) is prohibited without express written permission from me. I would really appreciate it if, when you sell your work or place pictures of your work, you would mention me as the designer. For more information, questions or comments you can always contact me via e-mail address [email protected]. I will contact you as soon as possible Also, I would find it very nice to see the result of my patterns back and you can email photo’s if you like! I will upload the picture to my guest gallery on my website. On www.biancmolendesigns.com you can find more patterns (free and paid).

Copyright Statement: Published with permission from Bianc van der Molen

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

For the necklace • • • • • •

Ca. 12 gr. 11/0 seedbeads Ca. 12 gr. 15/0 seedbeads Ca. 20 gr. Rulla 5x3 mm 250 x 3 mm firepolished or round beads 7 (or more) 11x8 mm glass pearl drop* drilled from top to bottom 11 (or more) 12 mm swarovski rivoli

* [or similar, just remind yourself that you have to change the amount of beads when you attach the drop] TIP: Adjust the amount of the beads and rivoli’s to the length andwidth of the necklace. For the earrings • • • • • •

Ca. 3 gr. 11/0 seedbeads Ca. 3 gr. 15/0 seedbeads Ca. 2 gr. Rulla 5 x 3 mm 32 x 3 mm firepolished or round beads 2 x 12 mm swarovski rivoli 2 x 11x8 mm glass pearl drop* drilled from top to bottom * [or compatible, just remind yourself that you have to change The amount of beads when you attach the drop]

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

For the bracelet

• • • • •

Ca. 7 gr. 11/0 seedbeads Ca. 7 gr. 15/0 seedbeads Ca. 8 gr. Rulla 5x3 mm 160 x 3 mm firepolished or round beads 7 (of meer) 12 mm swarovski rivoli

TIP: Adjust the amount of the beads and rivoli’s to the length and width of the bracelet. Look at the tip at the bottom of this page to count out the beads that you need for one component. Tools • Size 12 and 13 needle • C-lon AA of Nymo D or B [or similar to it] • 2 x clasp + jumprings • 1 pair of earhooks • Wax [threadheaven of beeswax is optional] • Scissors TIP! In each component 16 x 3 mm beads - 4 x rulla kralen 1 x swarovski rivoli. Keep in mind that you also need beads for in between the components. Especially with the necklace you use extra rulla and 3 mm beads. If you adjust the amount of components of the main row of the necklace you need to add an extra 11x8 glass pearl drop. NB - I used seedbeads of Toho fort his tutorials. Sometimes the beads of Toho and Miyuki can differ from size, if that is the case, adjust the pattern as you see fit.

And last but not least: have fun beading!

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Picture above: Earrings Picture below: Bracelet with round beads instead of firepolished beads

Picture above: Necklace part 1 Picture below: Necklace part 2

You will find more examples at the end of this tutorial BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Making of a component Step 1

Cut a thread length of ca. 1 arm length and pick up the following beads: 3 x 11/0 - 1 x rulla - 3 x 11/0 - 1 x rulla - 3 x 11/0 - 1 x rulla - 3 x 11/0 - 1 x rulla Go through all the beads again and come out of a 11/0 that comes after a rulla. See figure 1. Step 2

Pick up 2 x 15/0, skip 1 x 11/0 and go through the next 11/0 - rulla - 11/0. Repeat this step for the rest of the round and come out of the first 15/0 you threaded on. See figure 2.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 3

Pick up 2 x 15/0 and go through the next 15/0. Pick up 1 x 3 mm FP and go through the second hole of the rulla. Pick up 1 x 3 mm FP and go through the first 15/0. Repeat this step for the rest of the round and come out of the first 15/0 you threaded on. See figure 3. Step 4

Pick up 1 x 11/0 and go through the next 15/0 and 3 mm FP. Pick up 2 x 15/0 - 1 x 11/0 - 2 x 15/0. Skip the rulla and go through the 3 mm FP and the first 15/0 that’s on top. Repeat this step for the rest of the round and come out of a 11/0 that sits on the smal herringbone tower. See figure 4. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 5

We will now add the 12 mm rivoli (with the good side up) in this step. Pick up 2 x 11/0 - 2 x 15/0 - 2 x 11/0 and go through the 11/0 (indicated in dark red) that sits on the next herringbone tower. Repeat this step for the rest of the round and come out of the second 11/0 that comes after 1 x 15/0. See figure 5. Step 6

Go further, without picking up a bead, through the 11/0 - 2 x 15/0 - 2 x 11/0. Skip the beads that are indicated in dark red. Keep a tight tension on your thread in this step and the next. Repeat this step for the rest of the round. Go through all the beads without picking up a bead to make it more secure. Come out of the first 11/0 that comes after 2 x 15/0. See figure 6.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 7

Pick up 1 x 15/0 and go through the next 11/0. Go further through the 2 x 15/0 and 1 x 11/0. You will skip the 11/0 beads that are indicated in dark red. Repeat this step for the rest of the round and come out of a 15/0 (see figure 7). See figure 7. Step 8 - adding the 3 mm firepolished beads

Switch from a size 12 needle to the size 13 needle. Pick up 1 x 3 mm FP and go through the 11/0 from step 4 (indicated in dark red). Pick up a 3 mm FP and go through the first 15/0 (indicated in dark red) and the 15/0 next to it. See figure 8 for more clarity. Go through all the beads again, without picking up a bead.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Now go to the second 15/0 and come out of that one (see figure 8 for more clarity). Repeat this step for the rest of the round and go to the backside where you will come out of a 11/0 from step 1. You can also look at figure 9 for more clarity.

Step 8 A - adding rulla’s instead of FP beads.

Switch from a size 12 needle to the size 13 needle. TIP: Sometimes miyuki and toho differ in size, if there i to much space between the rulla and the 15/0 you come out, add a extra 15/0. You will get this sequence: 1 x 15/0 - 1 x rulla - 1 x 15/0. Pick up 1 x rulla - 1 x 15/0 and go through the 11/0 that is indicated in red. Pick up again 1 x 15/0 and go through the second hole of the rulla and then through the first 15/0 and the next 15/0 (they are indicated in dark red). See figure 8A for more clarity.

Go with your thread and needle alone through the beads you just added. Come out of the second 15/0 (see figure 8). Repeat this step for the rest of the round and go to the backside where you will come out of a 11/0 from step 1. You can also look at figure 9 for more clarity.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 9

Turn your component around so that your rivoli will point down! Pick up 5 x 15/0 and go through the next middle 11/0 (indicated in dark red) from step 1. Repeat this for the rest of the round and come out of the third 15/0 that you added in this step. See figure 9. * Tip: we are now working on the backside of the component! Step 10

Go with your needle and thread, without picking up a bead, through the next third 15/0 of the next row of 15/0’s. See figure 10 for more clarity. Repeat this for the rest of the round, do keep a tight tension on your thread. The beads you just added should form an X. Come out of the second 15/0 on the left. (see figure 10). See figure 10. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 11

Go with your needle and thread, without picking up a bead, through the next second 15/0 of the next row of 15/0’s. Go through the next 2 x 15/0 and go through the second 15/0 of the next row of 15/0’s. This way you will get the beads together for more firmness and to cover the back of the rivoli for protection. Go further without picking up a beads and come out of a 3 mm FP of step 3. We’ve finished our first component! Repeat steps 1 to 11. If you are making the earrings, keep on the main thread to add the beads. If you are making a necklace or bracelet, you can finish of your thread back in the component, we will connect the components for the necklace and bracelet with new thread. Make as many components as you need. If you want to make a pair of earrings you will only need two components (look at the what do you need section for the quantities). You will need 8 or more components for the bracelet. Although it may depend on the desired length of the bracelet. For the necklace part you will need at least 11 or more components. You can choose to add more components and less length of part 2 of the necklace.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

From component to earring: When you follow the next steps you will create a pair of earrings with the component you just made. Please note: In this description of making the earrings the rivoli will always point downwards. You will work on the backside and not on the front (where the rivoli is visible).

Step 1: Pick up 2 x 15/0 - 1x 11/0 - 2 x 15/0 and go through the next 3 mm FP. Pick up 3 x 15/0 and go through the next 15/0 (3 mm FP is indicated in dark red).

Step 2: *In this step you can thread on your earhook or put in on later when it’s finished.* Pick up 2 x 15/0 - 1 x rulla - 7 x 15/0 and go through the second hole of the rulla and pick up 2 x 15/0 and go through the next 3 mm FP. Pick up 3 x 15/0 and go through the next 3 mm FP.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 3: Pick up 2 x 15/0 - 1 x 11/0 - 2 x 15/0 and go through the next 3 mm FP. Pick up 3 x 15/0 and go through the next 3 mm FP. Step 4: Pick up 2 x 15/0 - 1 x rulla - 2 x 15/0 - 1 x drop - 1 x 15/0 and go back with your needle through the drop. Pick up 2 x 15/0 and go through the second hole of the rulla. Again, pick up 2 x 15/0 and go through the next 3 mm FP.

Pick up 3 x 15/0 and go through the next 3 mm FP. The first earring is finished. Work your thread back in your component or go through the beads you just added. Repeat step 1 to 4 again for the second earring. From component to bracelet: Before we begin: work your thread back into your components and snip it off. We will use a new piece of thread for connecting the components for the bracelet. We are working on the backside! This means that the good side of the rivoli is pointing downwards. Step 1:

Come, with your thread, out of a 3 mm FP that sits on the right side of the rulla. Pick up 3 x 15/0 and go through the next 3 mm FP. Pick up 2 x 15/0 - 1 x 11/0 - 2 x 15/0 and go through the next 3 mm FP. Pick up 3 x 15/0 and go through the next 3 mm FP. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 2:

Pick up 2 x 15/0 - 1 x rulla - 2 x 15/0 and go through the next 3 mm FP (that sits on the right side of the rulla) of a new component. See figure 2. Step 3:

Repeat step 1 and 2 for all the components save for one. When you are at the last component, just repeat step 1. See figure 3. We’re now making a loop where you can attach your clasp on (step 4). Step 4:

Pick up 2 x 15/0 - 1 x rulla - 4 x 15/0 - 1 x 11/- 4 x 15/0 - go back through the second hole of the rulla - 2 x 15/0 and go through the next 3 mm FP. If you need more beads for attaching your clasp, just add them or change the loop to your own taste!

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 5:

Pick up 3 x 15/0 and go through the next 3 mm FP. Pick up 2 x 15/0 - 1 x 11/0 - 2 x 15/0 and go through the next 3 mm FP.

Pick up 3 x 15/0 and go through the next 3 mm FP. Pick up 2 x 15/0 and go through the rulla that you added in the last steps. Pick up 2 x 15/0 and go through the 3 mm FP of the next component (it sits on the left side of the rulla). Repeat this step for the rest of the bracelet until you come to your last component and you come out of a 3 mm FP that sits on the left side of the rulla. Here we will create the same loop as we did in step 4. Your bracelet is now finished and you can work your thread back in the bracelet and snip it off! Do you want to see figure 5 larger? I added an enlarged version of this one at the end of the tutorial. If you want you can print it out for your convenience. Connecting the components for the necklace: In this part of the tutorial we will make the first part of the necklace. I used 11 components to make the example necklace but you can add more components at your own taste. I will follow the example in this description with 11 components. You can choose later if you want to add more components or not because we do add another separate part where we don’t use components that we will attach to this part of necklace.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Also you can lay out the necklace on your working surface and measure it. In this way you can see if you need more components to get the desired length. Or that you will leave it like this and finish the necklace with the description of the second part. You will find that part after this one, connection the components. Please note: the rivoli will always point downwards. You will be working on the backside and not on the front (where the rivoli is visible). NB: please take notice on the position of the component. We will be beading against the clock unless said different.

Step 1: Snip of a length of thread that works for you. You can also keep a longer endthread so you can use it later as your main thread. Go with your needle, from bottom to top, through a 3 mm FP (dark red). See figure 1.

Pick up 3 x 15/0 and go through the next 3 mm FP.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 2:

Pick up 2 x 15/0 - 1 x rulla - 2 x 15/0 - 1 x glass drop - 1 x 15/0. Go back through the drop, the last threaded 15/0 is now a stopper bead. Pick up 2 x 15/0 and go through the second hole of the rulla, pick up 2 x 15/0 and go through the next 3 mm FP (indicated in dark red). Step 4:

Pick up 3 x 15/0 and go through the next 3 mm FP.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 5:

Pick up 3 x 15/0 - 1 x rulla - 3 x 15/0. Pick up a second component and go with your needle from bottom to top through a 3 mm FP that sits on the right side of a rulla. See figure 4 for more clarity. Step 6:

Pick up 3 x 15/0 and go through the next 3 mm FP.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 7: Repeat steps 2 to 6. Step 8:

Pick up 2 x 15/0 - 1 x rulla - 2 x 15/0 and pick up a second component and go with your needle through a 3 mm FP that sits on the right side of a rulla (in figure 6 you can see that the 3 mm FP sits on the left side of the rulla, this is how you see it when you lay it in front of you on your work surface like figure 6). Step 9:

Pick up 3 x 15/0 and go through the next 3 mm FP.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 10:

Pick up 2 x 15/0 - 1 x 11/0 - 2 x 15/0 and go through the next 3 mm FP. Step 11:

Pick up 3 x 15/0 and go through the next 3 mm FP.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 12:

Pick up 2 x 15/0 - 1 x rulla - 2 x 15/0 - 1 x glass drop - 1 x 15/0. Go back through the drop. Pick up 2 x 15/0 and go through the second hole of the rulla, pick up 2 x 15/0 and go through the next 3 mm FP. Step 13:

Pick up 3 x 15/0 and go through the next 3 mm FP.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 14:

Pick up 2 x 15/0 - 1 x 11/0 - 2 x 15/0 and go through the next 3 mm FP. Step 15:

Pick up 3 x 15/0 and go through the next 3 mm FP. Pick up 2 x 15/0 and go through the second hole of the rulla. Pick up 2 x 15/0 and go through the next 3 mm FP that sits on the right of the component. See figure 13 for more clarity.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 16: Repeat step 6 to 11.

Step 17: Repeat steps 8 to 16.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 18: Pick up 2 x 15/0 - 1 x rulla - 2 x 15/0 - 1 x glass drop - 1 x 15/0. Go back through the drop. Pick up 2 x 15/0 and go through the second hole of the rulla, pick up 2 x 15/0 and go through the next 3 mm FP. Pick up 3 x 15/0 and go through the next 3 mm FP. Pick up 2 x 15/0 - 1 x 11/0 - 2 x 15/0 and go through the next 3 mm FP. Pick up 3 x 15/0 and go through the next 3 mm FP. Pick up 2 x 15/0 and go through the second hole of the rulla, pick up 2 x 15/0 and go through the next 3 mm FP. Pick up 3 x 15/0 and go through the next 3 mm FP. Pick up 3 x 15/0 - 1 x rulla - 3 x 15/0. Pick up a new component and go with your needle through a 3 mm FP that sits on the right side of a rulla. See figure 16 for more clarity. Pick up 3 x 15/0 and go through the next 3 mm FP. Pick up 2 x 15/0 - 1 x rulla - 2 x 15/0 - 1 x glass drop - 1 x 15/0. Go back through the drop. Pick up 2 x 15/0 and go through the second hole of the rulla, pick up 2 x 15/0 and go through the next 3 mm FP.

Pick up 3 x 15/0 and go through the next 3 mm FP. Pick up 3 x 15/0 - 1 x rulla - 3 x 15/0. Pick up a new component and go with your needle through a 3 mm FP that sits on the right side of a rulla. See figure 16 for more clarity. Pick up 3 x 15/0 and go through the next 3 mm FP. Pick up 2 x 15/0 - 1 x rulla - 2 x 15/0 - 1 x glass drop - 1 x 15/0. Go back through the drop. Pick up 2 x 15/0 and go through the second hole of the rulla, pick up 2 x 15/0 and go through the next 3 mm FP. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Pick up 3 x 15/0 and go through the next 3 mm FP.

Come out of a 3 mm FP on the end of connecting the components. You can choose to add more components or if it’s good like this. If you want to add more components, you can look on the images of the previous steps on how to attach the component. We’re now going to go further with connecting the components! Bead further, without picking up a bead, through the rulla and the 3 mm FP that comes next to it. See figure 17 for more clarity. Step 19:

Pick up 3 x 15/0 and go through the next 3 mm FP.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Pick up 2 x 15/0 - 1 x 11/0 - 2 x 15/0 and go through the next 3 mm FP. Pick up 3 x 15/0 and go through the next 3 mm FP.

Pick up 2 x 15/0 and go through the second hole of the rulla, pick up 2 x 15/0 and go through the next 3 mm FP. Repeat this step for the rest of the necklace and work your thread back into your component and snip it off. You can find an enlarged image (of this part of the necklace) at the end of this tutorial. You can print it out if you want to.

We’re now finished with connecting the components, Go further with the next step on making the second part of the necklace. In this way you can easily adjust the length of the necklace. Making the necklace part: This is the last part of the necklace, you connect this to the other part that you just made. In order to complete the necklace you need to follow the steps below twice. Tip! It’s in my experience that it’s more easy to make this part of the necklace separate from the other part. Now you can adjust if you made a mistake without going through it all over again. NOTE: Please note: the rivoli will always point downwards. You will be working on the backside and not on the front (where the rivoli is visible).

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 1:

Put two needles on the end of a new thread. Go with one of the needles through the skipped rulla of the last component. See figure 1 for clarity. The pick up the following beads on each side: 1 x 15/0 - 3 x 11/0 - 1 x 15/0.

Then pick up with your left needle 1 x 3 mm FP and cross with your right needle through the 3 mm FP. Your left needle becomes the right needle. Your right needle becomes your left needle. Step 2:

Pick up on each side 1 x 3 mm FP.

Pick up on your left needle 1 x 3 mm FP and cross with your right needle through the 3 mm FP. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Your left needle becomes the right needle. Your right needle becomes your left needle.

Step 3:

Pick up with on both needles: 1 x 15/0 - 3 x 11/0 - 1 x 15/0 - 1 x rulla - 3 x 15/0. Go with your needle back through the second hole of the rulla. Then pick up with both needles: 1 x 15/0 - 3 x 11/0 - 1 x 15/0. Pick up on your left needle 1 x 3 mm FP and cross with your right needle through the 3 mm FP. Your left needle becomes the right needle. Your right needle becomes your left needle. Step 4:

Pick up on each side 1 x 3 mm FP. Pick up on your left needle 1 x 3 mm FP and cross with your right needle through the 3 mm FP. Your left needle becomes the right needle. Your right needle becomes your left needle. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 5:

Pick up with on both needles: 1 x 15/0 - 3 x 11/0 - 1 x 15/0 - 1 x rulla - 3 x 15/0. Go with your needle back through the second hole of the rulla.

Then pick up with both needles: 1 x 15/0 - 3 x 11/0 - 1 x 15/0. Pick up on your left needle 1 x 3 mm FP and cross with your right needle through the 3 mm FP. Your left needle becomes the right needle. Your right needle becomes your left needle. Step 6:

Repeat step 4 and step 5 until you reached the desired length. If you are satisfied with the length, go further with step 7. Step 7:

We’re now going to make a loop to attach your clasp. Note: we’re going further with just one thread (left needle!) BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Tip: if you don’t need an extra jumpring for attaching your clasp, you can thread on your clasp at the same time as you add the beads. Pick up: 1 x 15/0 - 3 x 11/0 - 1 x 15/0 - 1 x rulla - 1 x 15/0 - 5 x 11/0 (change the amount of beads if it’s not enouch to attach your clasp) - 1 x 15/0. Go through the second hole of the rulla (you just created the your loop). Pick up 1 x 15/0 - 3 x 11/0 - 1 x 15/0 and then go from right to left through the 3 mm FP as shown in figure 6. Step 8:

Go back through the next beads without picking up a bead: 1 x 15/0 - 3 x 11/0 - 1 x 15/0 - 1 x rulla - 1 x 15/0 - 5 x 11/0 - 1 x 15/0 - 1 x rulla (2nd hole) - 1 x 15/0 - 3 x 11/0 - 1 x 15/0 - 1 x 3 mm FP - 1 x 15/0 - 3 x 11/0 - 1 x 15/0 - 1 x rulla - 3 x 15/0 - 1 x rulla (2nd hole) - 1 x 15/0. Come out of a 15/0 that sits before a rulla, see figure 7. Step 9:

Go now, still without picking up a bead, through the middle 15/0 that sits on top of a rulla (R2). See figure 8 for more clarity. The middle one is indicated in a dark red color. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Go further through the 15/0 (in the opposite direction so that the seedbeads comes to stand on top of the rulla) that sits in front of the rulla (R1). Go further through the rulla (R1) - 3 x 15/0 rulla - 1 x 15/0 - 3 x 11/0 - 1 x 15/0 - 1 x 3 mm FP - 1 x 15/0 - 3 x 11/0 - 1 x 15/0 - 1 x rulla -3 x 15/0 - 2nd hole of the rulla - 1 x 15/0. Repeat the beginning of this step: Go now, still without picking up a bead, through the middle 15/0 that sits on top of a rulla (R2). See figure 8 for more clarity. The middle one is indicated in a dark red color. Step 10:

Repeat step 9 until you come back to the rulla where you started this part of the necklace (see step 1). Come out of the 15/0 before the rulla. Go through the rulla - 1 x 15/0 - 3 x 11/0 - 1 x 15/0 - 1 x 3 mm FP 1 x 15/0 - 3 x 11/0 - 1 x 15/0.

At the moment the necklace should look like this: Step 11: This step is optional, you can skip it or replace the 11/0 for a 15/0.

Pick up 1 x 11/0 and go through the next beads without picking up a bead: 1 x 15/0 - 3 x 11/0 - 1 x 15/0 - 1 x 3 mm FP - 1 x 15/0 3 x 11/0 - 1 x 15/0.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 12:

If you have chosen to skip step 11 then you can weave your thread back in your work and finish. If you have decided to do step 11, then you can repeat step 11 for the rest of the necklace and you can weave your thread back in your work and finish. We are ready with one part of the necklace. Repeat steps 1 through 12 for the 2nd side. We are already at the end of this tutorial. I hope that you, like me, enjoyed to make this components and process them into a piece of jewellery. Try to experiment and enjoy beading!

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

More examples of Lady Evanthia During the testing we also tested whether we could show more of the rulla's. We then tried to use rulla’s instead of firepolished beads. Below you can see the result of Sandra Verzijden.

Picture above: Necklace with rulla's instead of firepolished beads. Picture below: Earrings with rulla's instead of firepolished beads.

I think it's become such a beautiful set and as you can see you get a totally different effect if you use rulla's instead of firepolished beads. Picture above: Earrings with spike beads instead of glass pearls. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Information: First of all I want to thank you for buying this pattern. This pattern is for personal and commercial use. This means that you may sell your finished work, that is made with this pattern, as long as you don’t mass produce. These instructions, both written as photographed or computer made remain exclusively in my copyright. The purchase of this pattern gives no transfer of all rights to the design and pattern. Teaching, sharing or distribution of this pattern (electronic or any other way) is prohibited without express written permission from me. I would really appreciate it if, when you sell your work or place pictures of your work, you would mention me as the designer. For more information, questions or comments you can always contact me via e-mail address [email protected]. I will contact you as soon as possible Also, I would find it very nice to see the result of my patterns back and you can email photo’s if you like! On www.biancmolendesigns.com you can find more patterns (free and paid). The following attachments are complete figures of connecting the components and the bracelet. You can print them if you like.

Copyright Statement: Published with permission from Bianc van der Molen

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

About the Author

Bianca van der Molen

Bianca van der Molen is a self-taught designer with a passion for beads. In addition to designing and making jewelry, she is engaged in drawing, painting, and photography as hobbies. Visit her at

www.biancmolendesigns.com

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Pinnacle Lace Earrings

• • • • • • • •

Materials and Colors: 12 - 2.5x5m Superduos - Czech Turquoise Blue/Picasso 8 - Size 8/0 Seed Beads - Miyuki Dark Bronze 8 - Size 11/0 Seed Beads - Miyuki Dark Bronze 60 - Size 15/0 Seed Beads - Miyuki Dark Bronze 2 - Earring Findings 4lb or 6lb Fireline ( I prefer 4lb) Size 11 Needle Flat Needle Nose Pliers

This pattern is rated at Advanced Beginner. Comfortable working with 2-Hole beads, Picot stitch and ending and adding a new thread. Starting the Earring: Use about 1 yd of thread for each Earring. Leave about a 3” tail.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Pinnacle Lace Earrings Step 1. a. String 4 B’s. (Figure 1, Blue) b. Making a circle pass back through all the 4 B’s you just strung. (Figure 1, Red)

Step 2. a. You should have a circle with your 4 B’s. (Figure 2, Green) b. Tie a Surgeon’s Knot with your working thread and your 3” tail. (See Figure 2 A, forninstructions on how to make a Surgeon’s Knot.)

Step 2 A: Surgeon’s Knot: To make a Surgeon’s Knot, bring the left thread over and around the right thread twice. Bring the right thread over and around the left thread one time and pull to tighten.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Pinnacle Lace Earrings Step 3. Adding the Superduos. a. Pass your needle through the next 2 B’s. (Figure 3, Purple) b. String 1 A; pass through the next B. (Figure 3, Blue) c. Repeat Step 3 b., 3 more times.

Step 4. Making the bottom of the Earring. a. You should be exiting a “B” (See Figure 4, Green Dot) b. Working in a Counter Clockwise direction; pass through the following beads: “A” (bottom hole), 1 B and “A” (bottom hole). (Figure 4, Green) c. String 3 D’s; step up by passing through the “A” top hole. (Figure 4, Purple) d. String 1 C, 1 A, 3 D’s; step up by passing through the “A” top hole. (Figure 4, Blue) e. String 3 D’s; step down by passing through the “A” bottom hole. (Figure 4, Red) f. String 1 C; pass through the next existing “A” top hole; String 3 D’s; step down by passing through “A” bottom hole. (Figure 4, Black)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Pinnacle Lace Earrings Step 5. Making top of the Earring. a. You should be exiting a “A” bottom hole of the bead. (See Figure 5, Purple Dot) b. In a Counter Clockwise direction pass through the following beads: 3 B’s and “A” (bottom hole). (Figure 5, Purple) c. String 3 D’s; step by passing through the “A” top hole. (Figure 5, Blue) d. String 1 C, 1 A and 3 D’s; step up by passing through the “A” top hole. (Figure 5, Red) e. String 3 D’s, 1 Earring Finding and 3 D’s; making a circle in a clockwise direction, pass through the “A” top hole. (Figure 5, Green) f. String 3 D’s; step down by passing through the “A” bottom hole. (Figure 5, Black) g. String 1 C; pass through the next existing “A” top hole. String 3 D’s; step down by passing through the “A” bottom hole. (Figure 5, Orange)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Pinnacle Lace Earrings Finishing Your Earring: Step 6. a. You should be exiting a “A” bottom hole. (See Figure 6, Purple Dot) b. In a counter clockwise direction, pass through the next to existing 2 B’s. (or until you meet up with the tail string.) (Figure 6, Purple) c. At this point you can either tie a surgeon’s knot with your working thread and tail, or you can just weave your thread back into your Earring to secure your work. Cut both your working thread and tail. d. If you haven’t added your earring finding to the loop you stitched in Step 5 e., then you can put it on at this point by using a flat needle nose pliers to open the hole of the earring finding. Slip earring finding through the loop, and close the earring finding by using the flat needle nose pliers.

Step 7. Repeat Steps 1 through Steps 6 for your other Earring.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Pinnacle Lace Earrings About the Author

Renee Kovnesky Hi, my name is Renee Kovnesky from Wisconsin - owner/designer of the online Etsy Store, Elegance by Renee, which sells beadweaving tutorials and kits. I am a self-taught beader since 2010, from magazines, the internet by buying tutorials and from the wonderful free patterns designer’s offered. 2 years ago I was offered a teaching job at a local bead store, to teach beadweaving classes. Never have taught a beadweaving class before, I had a wonderful time helping and teaching others to bead!!!! 1 1/2 years ago my designing and creativity just took off, thanks to my friends, students and customers that helped me by their inspiration and encouragment, that one day I just sat down and started to create my 1st design, and have not stopped since. My two favorite things about selling and teaching my designs is by seeing the excitment and the color combinations that my students and customers create. It truly inspires me to continue to teach and design. If I am not beading, teaching, designing and beading with friends, I am busy creating cards, upcycle jewelry boxes, fishing and most of all spending time with my family, friends and my Husband who is my biggest supporter!!!! Follow me at: My Etsy Shop: http://ElegancebyRenee.etsy.com My Facebook Page: http://ElegancebyRenee.facebook.com My Blog: http://elegancebyrenee.blogspot.com Email: [email protected]

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Dazzling in the New Year 2014 has been a good year. A lot of things have happened over the period of one year; both good and bad things. Let us learn from the not so good things and move onto a new year! Bring about a fresh and new spirit and let us welcome in the New Year! It is 2015! A new year! This year will be our best year yet! Let us strive to be better and more productive in 2015! To celebrate the New Year, why don’t we take a look at some awesome pieces that other jewelry designers have created? Inspirations can come from anything! Let us sit back and enjoy these amazing designs! In the future, you will never know, one of your designs may very well be the hottest piece on the world wide web! Let us have a look at some wonderful necklaces and earrings. The designs are fresh, and it brings about the feel of the New Year. Their colors and designs are just exquisite! These designs certainly do uplift your soul and boosts you to gear towards having an awesome New Year!

by SparkleBeastDesign

by StarJewels

by BeadingTimes

by LovelysbyLaura

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Dazzling in the New Year

by AnneEmmaJewelry

by AnneEmmaJewelry

by EarthlyBaubles

by BloomingEnamels

by VeraidaGifts

by WedunitJewels

Right next are these bracelets which would definitely give your outfit of the day that “pop” feel to get you motivated and feeling happy during this year!

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Dazzling in the New Year

by kluster

by reccabella

by BijiJewelry

by StylTrinkets

by BeadedSeasons

by ThePinkPaisleyShop BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

by icusuezq

by Kirameku

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Dazzling in the New Year

by RealSimple by Peggy Albright Let your creative flow and enable you to be like these awesome designers!

Don’t some of these designs remind you of fireworks? What festive celebration would be complete without some sparks right? Let us be that spark and don on some jewelry that will light up someone’s day. Always keep in mind that whether we like it or not, the New Year holds new challenges and opportunities, it is up to us on how to handle and face these challenges and opportunities!

Spread happiness and show the world what you can offer! Have a great year!

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Recommended Jewelry Making Supplies

Put a ring on it for additional design options. Already a favorite among creatives, the Pavé Thread Ring--with its beautifully sparkling pavé surface-now boasts two stringing holes and dozens of uses. Available in three different diameters.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM BLOG: DIY BEADING DIY BEADING MAGAZINE MAGAZINE ISSUE 26ISSUE 22 MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

Recommended Jewelry Making Supplies

A symbol of life, happiness and positivity, the sun is at the center of our world view. Its complex yet easily recognizable shape opens up a new, strongly faceted trend direction--and the frosted facets on the "G" version add to the rhythmic power of designs using it.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM BLOG: DIY BEADING DIY BEADING MAGAZINE MAGAZINE ISSUE 26ISSUE 22 MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

Recommended Jewelry Making Supplies

Need a Bead Now™ brand yellow organizer tote with black plastic handle and snap closures contains two 1-cell boxes, two different 5-cell boxes and one 10-cell box.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM BLOG: DIY BEADING DIY BEADING MAGAZINE MAGAZINE ISSUE 26ISSUE 22 MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

Recommended Jewelry Making Supplies

Bright blue imitation turquoise offers the look and feel of natural turquoise stone at a bargain price. Beads have an occasional black matrix. Promotional-quality "gemstones" in bulk package sizes of ten 16-inch strands for an unbeatable value. Ideal for manufacturers and resellers. Colors, shapes and sizes may vary in each lot.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM BLOG: DIY BEADING DIY BEADING MAGAZINE MAGAZINE ISSUE 26ISSUE 22 MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

• • • • • • • • •

Materials for a 19” Necklace 123 - 6mm 2 Hole Triangles 146 - 4mm Bicones 19 - 4mm Pearls 1 - 8mm Pearl .05g (82) - Size 15/0 Seed Beads 6g (542) - Size 11/0 Seed Beads 1 - Clasp 4lb or 6lb Fireline 1 - Size 11 Needle

This pattern is rated at Advanced Beginner. Comfortable working with 2-Hole beads, Picot stitch and ending and adding a new thread.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Making the Large Middle Component: Step 1. a. Before you start to string your beads, lay out 6 Triangle beads so they are all facing the same way (See Figure 1). This will make it easier when you are ready to string them.

NOTE: TL - Triangle Left Hole TR - Triangle Right Hole Step 2. You will need about 1 1/2 yards of thread. a. String the following beads: 1 B, 1 E, 3 A’s (TL), 1 E, 1 B, 1 E, 3 A’s (TL), 1E, 1 B, 1 E, 3 A’s (TL) and 1 E. (Figure 2, Blue)

Step 3. Leave about a 4 inch tail. a. Make a circle by passing back through all the beads you strung starting with the first “B” in Step 2 to secure your beads. (Figure 3, Red) b. Tie a surgeon’s knot with your tail. If you don’t know how to tie a surgeon’s knot see Figure 3A.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Figure 3A: Surgeon’s Knot: To make a Surgeon’s Knot, bring the left thread over and around the right thread twice. Bring the right thread over and around the left thread one time and pull to tighten.

Step 4. Make sure that your triangle peaks are facing up as you continue. The empty holes of the triangles (TR) should be facing on the outside. a. Your Surgeon’s Knot should be between the “E” and “B” bead. (See Figure 4, Red Dot) b. Pass through the next existing “B”. (Figure 4, Red) c. String 1 F. (Figure 4, Blue) d. Pass up through the existing 3 A’s on the opposite side of the “B” you are currently exiting from. The Pearl should sit nice and snug in between the beads. (Figure 4, Purple)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 5. You will be turning the component in a Clockwise direction as you add your beads. a. You should be exiting the “A” bead. (Figure 5, Red Dot) b. Step up by passing through the “A” top hole. (Figure 5, Red) c. String 1 D, pass through the next existing “A”, String 1 D, pass through the next existing “A”, String the following beads: 1 D, 1 B, 1 D, 1 B and 1 D (Figure 5, Purple) d. Pass through the next existing “A”, String 1 D, Pass through the next existing “A”, String 1 D, Pass through the next existing “A”, String the following beads: 1 D, 1 B, 1 D, 1 B and 1 D (Figure 5, Green) e. Pass through the next existing “A”, String 1 D, Pass through the next existing “A”, String 1 D, Pass through the next existing “A”, String the following beads: 1 D, 1 B, 1 D, 1 B and 1 D (Figure 5, Blue) f. Pass through the next existing “A” and “D” beads. (Figure 5, Orange)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 6. Making the Picots. As you are adding the picots you will be moving your component in Clockwise Direction. T ry to keep a tight tension. a. You should be exiting from the “D” bead that is between the 2 A’s. (See Figure 6, Green Dot) b. String 3 D’s. (Figure 6, Green) c. Make a circle by passing back through following existing beads: 1 D (that you had exited from before you strung the 3 D’s), 1 A and 1 D (Figure 6, Purple) d. String 3 D’s. (Figure 6, Blue) e. Make a circle by passing back through the following existing beads: 1 D (that you exited from before you strung the 3 D’s) 1 A, 1 D, 1 B and 1 D. (Figure 6, Orange) f. String 3 D’s (Figure 6, Teal) g. Make a circle by passing back through the following existing beads: 1 D (that you exited from before you strung the 3 D’s) 1 B, 1 D, 1 A and 1 D. (Figure 6, Red)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 7. a. Repeat Steps 6 a. through g. 1 more time to complete the other Picots to your component. (Figure 7, illustrates what your component will look like when you complete Step 6 the second time.)

Step 8. Completing the Picots. You will be rotaing the component in a Clockwise direction as you continue. a. You should be exiting from the “D” bead that is between the 2 A’s. (See Figure 8, Green Dot) b. String 3 D’s. (Figure 8, Green) c. Make a circle by passing back through following existing beads: 1 D (that you had exited from before you strung the 3 D’s), 1 A and 1 D (Figure 8, Purple) d. String 3 D’s. (Figure 8, Blue) e. Make a circle by passing back through the following existing beads: 1 D (that you exited from before you strung the 3 D’s), 1 A, 1 D, 1 B, 1 D, 1 B, 1 D, 1 A and 1 D. (Figure 8, Orange)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 9. Adding the Bicone to the Large Middle Component. You will be rotating the component in a Clockwise direction as you continue. a. You should be exiting the “D” bead that is between the 2 A’s. (See Figure 9, Blue Dot) b. Pass through the following existing beads: 1 A, 1 D, 1 A, 1 D, 1 B, 1 D, 1 B, 1 D, 1 A and 1 D (Figure 9, Blue) c. Continue by passing through the next following existing beads: 1 A and 3 D’s (in the existing Picot). (Figure 9, Green) d. String 1 B. (Figure 9, Red) e. Pass through the next following existing 3 D’s (in the existing Picot). f. Repeat Steps 9 c. through e. by passing through the beads 1 or 2 more time to secure the Bicone.

Step 10. End thread by either weaving thread back into component and cut thread. (do the same for the tail thread.) Or meet up with the tail, tie a Surgeon’s Knot, weave the working and tail thread back into the component and cut both threads.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 12. Leave about a 4 inch tail. a. Make a circle by passing back through all the beads you strung starting with the first “B” in Step 2 to secure your beads. (Figure 11, Red) b. Tie a surgeon’s knot with your tail. If you don’t know how to tie a surgeon’s knot see Figure 11A.

Figure 11A: Surgeon’s Knot: To make a Surgeon’s Knot, bring the left thread over and around the right thread twice. Bring the right thread over and around the left thread one time and pull to tighten.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 13. Make sure that your triangle peaks are facing up as you continue. a. Your Surgeon’s Knot should be between the “E” and “B” bead. (See Figure 12, Green Dot) b. Pass through the next existing “B”. (Figure 12, Green) c. String 1 C. (Figure 12, Purple) d. Pass up through the existing “B” on the opposite side of the “B” you are currently exiting from. The Pearl should sit nice and snug in between the beads. (Figure 12, Orange)

Step 14. You will be turning your component in a Clockwise direction as as you are adding your beads. a. You should be exiting the “B” bead. (Figure 13, Blue Dot) b. Pass through the next existing beads: 1 E and 3 A’s (Figure 13, Blue) c. Step up by passing through the “A” top hole. (Figure 13, Red) d. String 1 D, pass through the next existing “A”, String 1 D, pass through the next existing “A”, String the following beads: 1 D, 1 B, 1 D, 1 B and 1 D (Figure 13, Green) e. Pass through the next existing “A”, String 1 D, Pass through the next existing “A”, String 1 D, Pass through the next existing “A”,

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

String the following beads: 1 D, 1 B, 1 D, 1 B and 1 D (Figure 13, Purple) f. Pass through the next existing “A” and “D” beads. (Figure 13, Orange)

Step 15. Making the Picots. As you are adding the Picots you will be moving your component in Clockwise direction. Try to keep a tight tension. a. You should be exiting from the “D” bead that is between the 2 A’s. (See Figure 14, Green Dot) b. String 3 D’s. (Figure 14, Green) c. Make a circle by passing back through following existing beads: 1 D (that you had exited from before you strung the 3 D’s), 1 A and 1 D (Figure 14, Purple) d. String 3 D’s. (Figure 14 Blue) e. Make a circle by passing back through the following existing beads: 1 D (that you exited from before you strung the 3 D’s) 1 A, 1 D, 1 B and 1 D. (Figure 14, Orange) f. String 3 D’s (Figure 14, Teal) g. Make a circle by passing back through the following existing beads: 1 D (that you exited from before you strung the 3 D’s) 1 B, 1 D, 1 A and 1 D. (Figure 14, Red)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 16. a. Repeat Steps 15 a. through g. 1 more time to complete the other Picots to your component. (Figure 15, illustrates what your component will look like when you complete Step 15 the second time.)

Step 17. Adding the embellishment to the Small Middle Component. a. You should be exiting the “D” bead that is between the 2 A’s. (See Figure 16, Blue Dot) b. In a Clockwise direction pass through the following existing “A” and 3 D’s (in the existing Picot) (Figure 16, Blue) c. String 1 B. (Figure 16, Green) d. In a Clockwise direction, passing through the next existing 3 D’s (in the existing Picot). (Figure 16, Purple) e. Repeat Step 17 b. through d. by passing through the beads one more time to secure the Bicone.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 18. a. You should be exiting the “D” bead that is between the 2 A’s. (See Figure 17, Blue Dot) b. In a Clockwise direction pass through the following existing “A”, 3 D’s (in the existing Picot) and 1 B. (Figure 17, Blue) c. String 4 D’s, 1 B and 1 D. (Figure 17, Green) d. Pass back through 1 B and 1 D you just strung in Step 18 c. (Figure 17, Purple) e. String 3 D’s. (Figure 17, Orange) f. In a Counter Clockwise direction, make a circle by passing through the “B” bead. (Figure 17, Red) g. Repeat Steps 18 c. through f. by passing through the beads 1 or 2 more times to secure the embellishment you just created.

Connecting the 2 Middle Components: Step 19: You will be moving the component in a clockwise dirction as you work. a. You should be exiting the “B” bead. (See Figure 18, Green Dot) b. Pass through the following next existing beads: 3 D’s (in the existing Picots), 1 A, 1 D, 1 A, 1 D 1 B, 1 D, 1 B, 1 D, 1 A and 1 D. (Figure 18, Green)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

c. Continue to pass through the following next existing beads: 1 A and 3 D’s (in the existing Picot). (Figure 18, Purple) d. Pick up the Large Middle Component; pass though the existing “B” at the bottom of the Large Middle Component. (This was the last “B” bead you added to the Large Middle Component in Step 9) (Figure 18, Red) e. Pass through the 3 D’s (in the Picot) of the Small Middle Component. (Figure 18, Blue) f. Repeat Steps 19 c. through e. by passing through the beads 2 or 3 more times to secure the components. g. Weave the working thread to meet up with your tail and tie a Surgeon’s Knot. Weave both threads back into the component and cut thread. Or just weave thread and tail back into the component and cut thread.

Making the Sides of the Necklace: Step 20. You will need about 1 1/2 yards of thread. See Step 1 how to set up the Triangles before you string them. a. String the following beads: 1 B, 1 E, 3 A’s (TL), 1 E, 1 B, 1 E, 3 A’s (TL) and 1 E. (Figure 19, Blue)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 21. Leave about a 4 inch tail. a. Make a circle by passing back through all the beads you strung starting with the first “B” in Step 2 to secure your beads. (Figure 20, Red) b. Tie a surgeon’s knot with your tail. If you don’t know how to tie a surgeon’s knot see Figure 20A.

Figure 20A: Surgeon’s Knot: To make a Surgeon’s Knot, bring the left thread over and around the right thread twice. Bring the right thread over and around the left thread one time and pull to tighten.

Step 22. Make sure that your triangle peaks are facing up as you continue. a. Your Surgeon’s Knot should be between the “E” and “B” bead. (See Figure 21, Green Dot) b. Pass through the next existing “B”. (Figure 22, Green)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

c. String 1 C. (Figure 21, Purple) d. Pass up through the existing “B” on the opposite side of the “B” you are currently exiting from. The Pearl should sit nice and snug in between the beads. (Figure 21, Orange)

Step 23. You will be turning your component in a Clockwise direction as as you are adding your beads. a. You should be exiting the “B” bead. (Figure 22, Blue Dot) b. Pass through the next existing beads: 1 E and 3 A’s (Figure 22, Blue) c. Step up by passing through the “A” top hole. (Figure 22, Red) d. String 1 D, pass through the next existing “A”, String 1 D, pass through the next existing “A”, String the following beads: 1 D, 1 B, 1 D, 1 B and 1 D (Figure 22, Green) e. Pass through the next existing “A”, String 1 D, Pass through the next existing “A”, String 1 D, Pass through the next existing “A”, String the following beads: 1 D, 1 B, 1 D, 1 B and 1 D (Figure 22, Purple) f. Pass through the next existing “A” and “D” beads. (Figure 22, Orange)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 24. Making the Picots. As you are adding the picots you will be moving your component in Clockwise Direction. Try to keep a tight tension. a. You should be exiting from the “D” bead that is between the 2 A’s. (See Figure 23, Green Dot) b. String 3 D’s. (Figure 23, Green) c. Make a circle by passing back through following existing beads: 1 D (that you had exited from before you strung the 3 D’s), 1 A and 1 D (Figure 23, Purple) d. String 3 D’s. (Figure 23, Blue) e. Make a circle by passing back through The following existing beads: 1 D (that you exited from before you strung the 3 D’s) 1 A, 1 D, 1 B and 1 D. (Figure 23, Orange) f. String 3 D’s (Figure 23, Teal) g. Make a circle by passing back through the following existing beads: 1 D (that you exited from before you strung the 3 D’s) 1 B, 1 D, 1 A and 1 D. (Figure 23, Red)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 25. a. Repeat Steps 24 a. through g. 1 more time to complete the other Picots to your component. (Figure 24, illustrates what your component will look like when you complete Step 24 the second time.)

Step 26. Adding the Bicones to the end of the Component. a. You should be exiting the “D” bead that is between the 2 A’s. (See Figure 25, Blue Dot) b. In a Clockwise direction pass through the following existing “A” and 3 D’s (in the existing Picot). (Figure 25, Blue) c. String 1 B. (Figure 25, Red) d. In a Clockwise direction pass through the following existing 3 D’s (in the existing Picot). (Figure 25, Green) e. Repeat Steps 26 b. through d. by passing all the beads 1 or 2 more times to secure the Bicone.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 27. Connecting the Small component to the Left side of the Large Middle Component first. (You will connect the Small components together in the same matter.) NOTE: Make sure all the 2-hole triangles are facing up when connecting the components.

a. You should be exiting the “D” bead after securing the Bicone on the end. (Figure 26, Blue Dot) b. In a Clockwise direction, pass through the following existing beads: 1 A, 3 D’s (in the existing Picot) and 1 B (Figure 26, Blue) c. Pick up the Large Middle Component; In a Counter Clockwise direction pass through the following existing beads: 3 D’s (in the existing Picot of the Large Middle Component), 1 A and 3 D’s (in the existing Picot of the Large Middle component). (Figure 26, Green) d. Continuing in a Counter Clockwise direction pass through the middle “B” bead. (Figure 26, Purple) e. Repeat Steps 27 c. and d. by passing through all the beads 1 or 2 mores to secure the components.

Ending your thread for each component: Step 28. You can either weave the thread to meet up with the tail and tie a Surgeon’s Knot or you can weave your working thread through your component and cut thread. Weave the tail through the component and cut thread. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 29. Repeat Steps 20 through 28 to complete the left side of the Necklace with the Small components. Attaching the Clasp to the End of the Necklace: Step 30. Weaving to the other end of the component to add the last Bicone. a. After you have connected your last component you should be exiting the “D” bead that is between the 2 A’s. (See Figure 27, Blue Dot) b. In a Counter Clockwise direction, pass through the following existing beads to the other side of your component to add the last Bicone: 1 A, 1 D, 1 A, 1 D, 1 B, 1 D, 1 B, 1 D, 1 A and 1 D. (Figure 27, Blue) c. Continue to pass through the following existing beads: 1 A and 3 D’s (in the existing Picot). (Figure 27, Purple) d. String 1 B. (Figure 27, Orange) e. In a Clockwise direction, pass through the next existing 3 D’s (in the existing Picot). (Figure 27, Green) f. Repeat Steps 30 c. through e. by passing through the beads 1 or 2 more times to secure the bicone.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Step 31. Adding the Clasp. a . You should be exiting the “D” bead from (See Figure 28, Blue Dot) b. In a Clockwise direction, pass through the following existing beads: 1 A, 3 D’s (in the existing Picot) and 1 B. (Figure 28, Blue) c. String 5 D’s and the Clasp. (Figure 28, Green) d. Pass back down the last “D” bead right below the Clasp. (Figure 28, Red) e. String 4 D’s. (Figure 28, Purple) f. In a Counter Clockwise direction, make a circle by passing through the “B” bead. (Figure 28, Orange) g. Repeat Steps 31 c. through f. by passing through all the beads, 2 or 3 more times, to secure your Clasp. h. You can either weave to your thread to meet up with the tail and tie a surgeon’s knot or you can weave your working thread through the component and cut thread. Weave tail through your component and cut thread.

Step 32: Repeat Steps 20 through 31 to the Right Side of your Necklace.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

About the Author

Renee Kovnesky Hi, my name is Renee Kovnesky from Wisconsin - owner/designer of the online Etsy Store, Elegance by Renee, which sells beadweaving tutorials and kits. I am a self-taught beader since 2010, from magazines, the internet by buying tutorials and from the wonderful free patterns designer’s offered. 2 years ago I was offered a teaching job at a local bead store, to teach beadweaving classes. Never have taught a beadweaving class before, I had a wonderful time helping and teaching others to bead!!!! 1 1/2 years ago my designing and creativity just took off, thanks to my friends, students and customers that helped me by their inspiration and encouragment, that one day I just sat down and started to create my 1st design, and have not stopped since. My two favorite things about selling and teaching my designs is by seeing the excitment and the color combinations that my students and customers create. It truly inspires me to continue to teach and design. If I am not beading, teaching, designing and beading with friends, I am busy creating cards, upcycle jewelry boxes, fishing and most of all spending time with my family, friends and my Husband who is my biggest supporter!!!! Follow me at: My Etsy Shop: http://ElegancebyRenee.etsy.com My Facebook Page: http://ElegancebyRenee.facebook.com My Blog: http://elegancebyrenee.blogspot.com Email: [email protected]

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern

This is simple pattern that excellently fits for frienship bracelets. You can match any colors you like. This file includes pattern detail diagrams and requires intermediate - advanced knowledge in bead crochet, it doesn’t show step by step how to bead crochet. YOU CAN ADJUST YOUR OWN COLOR COMBINATIONS, this is only suggestion. Materials for a bracelet~17.5cm (6.9 inches) not including a clasp and extender Japanese Toho seed beads 11/0 or Czech seed beads 10/0

•

•

Cotton bead crocheting thread • 3 crystals • 2 bead end tip caps • Clasp • Extender chain • Memory wire Pin to attach a crystal to the chain • Crochet hook 1.0

!!! The same pattern can be used for a necklace. For the necklace ~50cm ( 19.7in) you need 14g of seed beads each color.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern This is a diagram of beads for a section of pattern, crocheted it makes about 5cm, for a necklace it is suggested to string this diagram 38-43 times ( it is better if you string a bit more than less). String the beads on a thread carefully following the diagram. Start from the bottom and go up each line, start where the arrow points. When you have repeated diagram 10 times start crocheting. Circumference -8 beads (a circle consists of 8 beads)

Bead crocheting tutorial 1.Step String the beads according to the scheme ( can be used any other scheme or for practising bead crocheting even one color beads).

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern It is suggested to string a little bit more than less.

2.Step After you finish stringing all the beads, do NOT cut the thread. You will continue to use thread from the spool as you crochet. Remove the twisted wire needle. Leave an 20-30cm (8-12-inch) tail, and make a slip knot. Slip the loop onto a crochet hook. Tighten the loop around the shaft of the crochet hook.

3.Step Crochet a chain with 9 loops ( a loop more than given circumference in the pattern because the first and the last loop joined together will cover each other)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern 4.Step

Join the ends to form a ring by sliding the hook through the first loop of the chain next to the tail. 5.Step

To start bead crocheting move the first 8 beads closer, it will help you to make the first circle and be sure you haven’t miscounted loops. 6.Step

Slide one pre-strung bead down into position, near to the hook and yarn over the front of the crochet hook. BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern 7.Step

Catch the yarn with the hook, and pull it through the loop. 8.Step

Slide the hoo through the next loop and repeat steps 6-7.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern 9.Step

Repeat steps 6-7 until you have bead crocheted all eight first round beads. You must get THIS!

10.Step

Slide the hook through under the first bead, then slide the bead to the right so that its hole is up as shown in the picture.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern 11.Step

Slide one pre-strung bead down into position, near to the hook and yarn over the front of the crochet hook. 12.Step

Catch the yarn with the hook and pull the thread through the two loops on the hook.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern 13.Step

Repeat steps 10-12 until you have reached the desired length of the bracelet or necklace. NOTE! As the rope grows with each row it will become easier to hold it while crocheting. Don’t get worried at the very beginning!

When you have reached the necessary length it must look like this.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern 14.Step To finish bead crochet rope and make it look nice as the other end crochet one more round without beads ( even if there are spare left) Slide the hook under the bead, slide it to the lef, catch the yarn with the hook and pull the thread through the two loops on the hook.

You must get this.

15.Step Pull the loop with the hook and cut 20-30cm (8-12-inch) tail, fix and hide both ends with a help of needle. Prepare other materials for finishing the bracelet.

 Memory wire  Bead end tip caps  crystals  Extender chain  clasp  pin

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern 16.Step Measure the necessary length of a memory wire, cut it longer than you need. With a help of pliers add a clasp.

17.Step

String a crystal and a bead end tip cap as shown in the picture. 18.Step

Carefully move the memory wire through the bead crochet rope.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern 19.Step

String the bead end tip cap and the crystal at the other end. Make sure end caps are placed well onto bead crochet rope. 20.Step With a help of pliers form a loop of the memory wire at the end of the bracelet for closing the clasp. Then don’t forget to string the extender chain and wrap the end of the wire around once/twice to finish.

21.Step Slide the last crystal on a pin and attach it to the end on the extender chain, it will give finished look of the bracelet.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern Visual look of the necklace

Finished bead crochet rope friendship bracelets

Enjoy and dare to play with colors! =)

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Friendship Bracelet Pattern

About the Author

Ieva Bambale (it’s ieva not Leva, like adam and Eve but in Latvian) I’m self-taught beader from Latvia and I live in its capital Riga, small but beautiful country. How did it start or to be more precise restarted my childhood’s hobby? Quite simply, holidays,rainy weather and I found long time ago purchased small packet of seed beads in a drawer chest.I tried to create something but then I searched in the Internet and found some simple beadingtechniques. I started with the one that I liked, and the result you can see in the gallery of my website. Now I am passionate about color combinations and I am gradually challenging myself with newbeading techniques that I like. Each peace of item I create as I like it, they are not made just for making and selling, they are unique with some exceptions when customers order copies. Eachpiece of jewelry is patiently made​​ and the result is good and people like it as well as I do. I am keen on not only with creating jewelry of seed beads, but also figure skating, car races -drift (I am technician, yes I am blonde but I can assist to change a gearbox or do some engine works), and photography. I enjoy life doing things I like! You can follow me: My website – http://shinkabeads.jimdo.com Facebook - http://www.facebook.com/pages/Shinkabeads/481708498521047 My online store - http://www.etsy.com/shop/Shinkabeads Twitter - http://twitter.com/ShinkaBeads

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Recommended Readings

Bead Metamorphosis: Exquisite Jewelry from Custom Components

Beautiful bead-woven jewelry that is convertible, reversible, or interchangeable. Delight in a spectrum of 16 bead weaving projects in Bead Metamorphosis. Create beautiful bead-woven earrings, necklaces, bracelets, and brooches—all of which transform by disassembling, reassembling, reversing, or interchanging separate beadwork components. Author Lisa Kan is known for her elegant and feminine bead-woven jewelry design that often features leaves, faceted stones, and other romantic flourishes. Now she applies her trademark style to a jewelry collection featuring peyote, herringbone, right-angle weave, netting, and other bead stitches. See how beaded elements transform from simple to complex by changing the beadwork, changing the colors, or adding layered embellishments. Ideas and inspiration for multiple variations will lead to new metamorphoses, as you create stunning jewelry design with multiple looks.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM BLOG: DIY BEADING DIY BEADING MAGAZINE MAGAZINE ISSUE 26ISSUE 22 MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

Recommended Readings

Stitching with Two-Hole Shaped Beads

Stitching with Two-Hole Shaped Beads gives jewelry makers new ideas for using popular two-hole beads. Stitchers will learn how to use squares, Tilas, SuperDuos, rullas, bricks, disks, and more to create over 25 beautiful, geometric projects. These gorgeous bracelets, earrings, and collars are made with five stitches including herringbone, peyote, square stitch, right-angle weave, and Virginia’s unique new stitch, the 'cluster stitch'. As always, Virginia’s clear illustrations and instructions help all beaders understand and execute each piece with success.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM BLOG: DIY BEADING DIY BEADING MAGAZINE MAGAZINE ISSUE 26ISSUE 22 MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

Recommended Readings

Creative Beading Vol. 9: The Best Projects from a Year of Bead&Button Magazine

Creative Beading Vol. 9 is a yearbook of projects from Bead&Button magazine. With a thorough basics section and helpful tips for readers, the book also includes over 75 editortested projects from the magazine. Inspiring and easy to follow, Creative Beading Vol. 9 is divided into sections, with projects grouped by technique (single-stitch, multiple-technique, and other techniques). Included is a range of stitching, stringing, wirework, and embroidery projects, plus bead crochet and kumihimo. Readers will also learn about the latest bead shapes and other rising trends in the beading world.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM BLOG: DIY BEADING DIY BEADING MAGAZINE MAGAZINE ISSUE 26ISSUE 22 MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

Recommended Readings

The Beading Answer Book

The Beading Answer Book puts to rest the fears of every unstrung beader with illustrated instructions and insightful advice for solving every problem they may face. Beadwork instructor and author Karen Morris has assembled more than 200 of the most vexing questions her students ask and offers skillful advice on how to resolve every dilemma. Whether it's a beginner trying to choose the right supplies for a simple necklace or an advanced crafter wanting to master the details of off-loom weaving or knitting and crocheting with beads, The Beading Answer Book is sure to be an indispensable reference. It's designed in an appealing small format that can be tucked inside any beader's supply box. Night or day, any time of the week, this wise companion is always available to unravel those pesky beading questions that can tie bead enthusiasts up in knots.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM BLOG: DIY BEADING DIY BEADING MAGAZINE MAGAZINE ISSUE 26ISSUE 22 MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

ELEGANTIA PENDANT Materials Version a) • 1 Rivoli Swarovski Topaz 12mm (A); • 16 pink coral pearls 4mm (B); • 16 pink coral pearls 3mm (C); • 72 SuperDuo 5x2,5mm beads Dark Bronze (D); • 24 SuperDuo 5x2,5mm beads Opaque Luster Champagne (E); • Rocailles Toho Round 15/0 seed beads Permanent Finish Galvanized Starlight (1gr) (F); • Rocailles Toho Round 11/0 seed beads Permanent Finish Galvanized Starlight (1gr) (G); • Nylon Thread 0,16mm-6,6lb/Fireline crystal Thread 0,15mm-17lb and beading needle size 10 or 12. Version b) • 1 Rivoli Swarovski Sapphire 12mm (A); • 16 bicones Swarovski Fuchsia 4mm (B); • 16 bicones Swarovski Fuchsia 3mm (C); • 64 SuperDuo 5x2,5mm beads Sapphire Mat AB (D); • 32 SuperDuo 5x2,5mm beads Luster White (E); • Rocailles Toho Round 15/0 seed beads Permanent Finish Galvanized Aluminium (1gr) (F); • Rocailles Toho Round 11/0 seed beads Permanent Finish Galvanized Aluminium (1gr) (G); • Nylon Thread 0,16mm-6,6lb/Fireline crystal Thread 0,15mm-17lb and beading needle size 10 or 12. Diameter: about 5cm

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

ELEGANTIA PENDANT Esexecution: Step 1

String 8 Superduos (D) and 8 roc 15/0 (F) in alternance and closet o form a circle; pass the thread through the work and fix it with two ties and exit the top hole of the first Superduo added. Sequence: [1D, 1F] x 8 times Step 2

Work by peyote stitch between Superduos (D) added to step 1, inserting 1 pearl 4mm (B), as shown. Exit the first pearl added to the present step. Sequence: [1B] x 8 times

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

ELEGANTIA PENDANT Step 3

Work by peyote stitch between pearls (B) added to step 2, inserting 1 Superduo (D) as shown in the picture, up to complete the path. Exit the first Superduo added to the present step. Sequence: [1D] x 8 times Step 4

Place the rivoli (A) on the work, as shown in the picture. The next step needs to bezel the rivoli.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

ELEGANTIA PENDANT Step 5

Fold up the Superduos added to step 3 and work by peyote stitch between these ones adding 1 pearl 3mm (C), up to complete the path. Pass the thread through the work up to fix the rivoli and pull the thread: in this way you’ll bezel the rivoli. Exit the first pearl 4mm (B) added to step 2, as shown in the picture. Sequence: [1C] x 8 times Step 6

Add 3 roc 15/0 (F) between pearls 4mm (B) added to step 2 working counter-clockwise. Repeat the sequence up to complete the path; exit the second roc 15/0 added to the present step, as shown. Sequence: [3F] x 8 times

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

ELEGANTIA PENDANT Step 7

Insert in this order 1 roc 15/0 (F), 1 Superduo (D), 1 Superduo (E), 1 Superduo (D), 1 roc 15/0 (F) and enter the central roc 15/0 of the second group of 3 roc 15/0 added to the previous step. Repeat the sequence as shown up to complete the path. Exit the top hole of the first Superduo added to the present step. Sequence: [1F, 1D, 1E, 1D, 1F] x 8 times Step 8

Work by peyote stitch between Superduos added to the previous step, inserting 1 roc 11/0 (G), 1 Superduo (E), 1 Superduo (E) and repeat the sequence 8 times as shown in the picture, up to complete the path. Exit the top hole of the first Superduo (E) added. Sequence: [1G, 1E, 1E] x 8 times BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

ELEGANTIA PENDANT Step 7

Insert in this order 1 roc 15/0 (F), 1 Superduo (D), 1 Superduo (E), 1 Superduo (D), 1 roc 15/0 (F) and enter the central roc 15/0 of the second group of 3 roc 15/0 added to the previous step. Repeat the sequence as shown up to complete the path. Exit the top hole of the first Superduo added to the present step. Sequence: [1F, 1D, 1E, 1D, 1F] x 8 times Step 8

Work by peyote stitch between Superduos added to the previous step, inserting 1 roc 11/0 (G), 1 Superduo (E), 1 Superduo (E) and repeat the sequence 8 times as shown in the picture, up to complete the path. Exit the top hole of the first Superduo (E) added. Sequence: [1G, 1E, 1E] x 8 times BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

ELEGANTIA PENDANT Step 9

Work by peyote stitch between Superduo added to the previous step going on counter-clockwise and adding 1 pearl 4mm (B), 3 Superduo (D) and repeat the sequence 8 times as shown, up to complete the path. Exit the bottom hole of the second Superduo (D) added. Sequence: [1B, 3D] x 8 times Step 10

Working clockwise, add 1 roc 11/0 (G), enter the next Superduo (E) added to step 8 and pass the thread through the work up to exit the next Superduo (E); add again 1 roc 11/0 (G) and enter the bottom hole of the next Superduo (D) added to step 9. Repeat the sequence up to complete the path, as shown in the picture. Sequence: [1G, 1G] x 8 times BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

ELEGANTIA PENDANT Step 11

Starting 1 roc 11/0 (G) added to step 8, add 3 roc 15/0 (F) and enter from bottom to top the next roc 11/0 added to step 9; add 5 roc 15/0 (F) and enter from top to bottomo the next roc 11/0 (G) added to step 9; add again 3 roc 15/0 and enter the next roc 11/0 (G) added to step 8. Repeat the sequence up to complete the path, as shown in the picture. Sequence: [3F, 5F, 3F] x 8 times Step 12

Pass the thread through roc 15/0 (F) added to step 11 and roc 11/0 (G) added to step 10, that is grey rocailles, as shown and pull the thread.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

ELEGANTIA PENDANT Step 13

Starting the central rocaille of one of groups of 5 roc 15/0 (F) added to step 11 and working clockwise, add 2 roc 15/0 (F) and enter the top hole of the next Superduo (D) added to step 9; add 1 Superduo (D) and enter the next pearl 4mm (B) added to step 9. Insert another Superduo (D) and enter the top hole of the next Superduo (D) added to step 9 and add again 2 roc 15/0 (F) and enter the central roc 15/0 (F) of the group of 5 roc 15/0 (F) added to step 11. Repeat the sequence 8 times, as shown in the picture up to complete the path. Sequence: [2F, 1D, 1D, 2F] x 8 times

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Passo 14

ELEGANTIA PENDANT

Starting the top hole of the Superduo (D) added to step 9, add 3 roc 15/0 (F) and enter the top holes of 2 next Superduos (D) added to step 13, add again 3 roc 15/0 (F) and enter the top hole of the next Superduo (D) dded to step 9; add 1 pearl 3mm (C) and enter the top hole of the next Superduo (D) added to step 9 and repeat the sequence up to complete the path as shown in the picture. Sequence: [3F, 3F, 1G] x 8 times Step 15

Between 2 groups of 3 roc 15/0 (F) added to the previous step, add in this order 1 roc 15/0 (F), 1 roc 11/0 (G), 1 roc 15/0 (F) and pass the thread through the work. Repeat the sequence up to complete the path as shown in the picture. Sequence: [1F, 1G, 1F] x 8 times BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

ELEGANTIA PENDANT

How to make the loop: Step 16

Starting 1 pearl 3mm (C) add 9 roc 15/0 (F) and enter the bottom hole of underlying Superduo (D) (added to step 9) and exit the bottom hole of the next Superduo (D), add again 9 roc 15/0 (F) and enter the pearl (C), as shown. Sequence: [9F, 9F] x 1 time Step 17

Join the 2 sequences of seed beads 15/0 (F) added to step 16 following herringbone stitch, as shown in the picture.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

ELEGANTIA PENDANT I hope you’ve enjoyed this tutorial! I’d like to see your creations and if you want, sharing them with my followers on my fan page: https://www.facebook.com/pages/CreazioniSwarovski-MEI-Bijoux/244434058927046 I’d like you give credit to me for the design when you publish your beadwork. This pattern has been realized only by me. ***This tutorial and every its pictures, photos, diagrams are copyright to Antonella Di Spigno.

****It’s allowed selling items made from my tutorial, but you don’t have the permission to distribute, copy and sell this pattern. The copyrights will remains with Antonella Di Spigno. It’s forbidden teaching this design without my expressed approval. If you have questions or need for explanations, contact me by email address: [email protected] [email protected] or by fanpage: https://www.facebook.com/pages/CreazioniSwarovski-MEIBijoux/ 244434058927046 Happy beading!! Copyright Statement: Published with permission from Antonella Di Spigno BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

ELEGANTIA PENDANT About the Author

Antonella Di Spigno Antonella Di Spigno is a bead designer for passion and sometimes teaches her projects for magazines. She is a management engineer junior and she loves to shape her creativity. Have a look at her designs at www.meibijoux.etsy.com, or contact her at [email protected] or at her facebook profile.

BLOG: WWW.HANDMADE-JEWELRY-CLUB.COM

MEMBERSHIP: WWW.DIYBEADINGCLUB.COM

BLOG: DIY BEADING MAGAZINE ISSUE 26

Our digital magazine is available through Apple Newsstand service available to millions of IPAD users! To advertise with us please email us at

[email protected] Or visit our page at

http://www.diybeadingclub.com/advertising/