Eci Bg Login Procedure.pdf

HOW TO LOGIN TO BG (BG 20, 30) AND NPT 1200 REQUIREMENT: 1. Software LCT –APT 2. LAN CABLE, normal cable for local login. 3. Laptop. PROCEDURE: Install LCT –APT software to your laptop , after completing installation it will appear on your desktop as below:-

Establish connection btn your laptop and NE (BG20, 30 or NPT 1200) NOTE: MNG port on NE will be used for local login for BG 30 >>MCP30

The same will be done to NPT 1200 and BG 20. Prepared by Geophrey Michael: REIME south region : C2

Setting your laptop IP to NE IP domain >Default NE IP 194.194.194.193, Sub Mask 255.255.255.0 On your laptop set the IP 194.194.194.194 and the same sub mask as above. See below

Start LCT-APT on your and enter the following credential .IP 194.194.194.193 Username :root Password : root See below:-

Prepared by Geophrey Michael: REIME south region : C2

Once you click login icon from the LCT –APT below alarm will appear

Then select No. After that software will start logging to the equipment as seen below:-

Prepared by Geophrey Michael: REIME south region : C2

After some second the main window of you NE will pop as shown below:-

Now you can proceed with configuration/ lunch team viewer for remote support. NOTE: You can also ping the NE from the software as per screenshot below:-

Prepared by Geophrey Michael: REIME south region : C2

Prepared by Geophrey Michael: REIME south region : C2