Electrical Safety Audit Report On Reckitt Benckiser Bangladesh Limited2

  • Uploaded by: Sadia Sharmin Nilima
  • 0
  • 0
  • February 2021
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Electrical Safety Audit Report On Reckitt Benckiser Bangladesh Limited2 as PDF for free.

More details

  • Words: 666
  • Pages: 7
Loading documents preview...
Electrical Safety Audit Report on Reckitt Benckiser (Bangladesh) Limited A. General Data Assessment Date

December 30, 2012

Factory Name

Reckitt Benckiser (Bangladesh) Limited

Address

58/59 Nasirabad Industrial Area, Chittagong-4209, Bangladesh

Contact Person & Designation Contact Number

Mr. Nazim Uddin, Factory Manager.

E-mail Assessment Audit Result

+88-031-681403 [email protected] Assessed by: 1. Mr. Kamal Hosain Bhuiyan, Consultant 2. Mr. Md. Sohorab Hossain, Industrial Surveyor Electrical Safety Safe Low Risk Medium Risk High Risk

MSD Global Compliance, SK Tower, 701, Shahid Tazuddin Road, Mogh Bazar, Dhaka-1217, Bangladesh Tel: +8801731806072, E-mail: [email protected], Web: www.msdglobalcompliance.com

MSD Global Compliance, SK Tower, 701, Shahid Tazuddin Road, Mogh Bazar, Dhaka-1217, Bangladesh Tel: +8801731806072, E-mail: [email protected], Web: www.msdglobalcompliance.com

B. Factory Data Product

Total Employees Total Number of Workers

The main products manufactured by the factory are all house hold, Pharma, mosquito coils. 10 2 The total land area is about 16309 square meters and the factory occupied 7905 square meter for production process. 931 Male: 800 Female:100 Total:900

Other personnel

Management

Number of Buildings Number of sheds Total Area

Interviews with Employees Factory floor description

3rd party service Others Total providers 31 ( if ) 30 1 Not applicable Not Applicable Male Female Total 7 0 7 In view of the facilities, there are 10 buildings & 2 sheds in the factory premises. Security personnel

Building 1 ( One storied) DLS building Building 2 ( Two storied) Premix building Building 3 ( Four storied) Ground floor of the building is used as packing material storage area. 1st floor is used as Harpic filling & Packing room. 2nd floor is used as Harpic process room. 3rd floor is used as Ligol,Trix room. Building 4 ( four storied) Ground floor of the building is used as Pharma processing area. 1st floor is used as Pharma processing area. 2nd floor is used as Store. 3rd floor is used as Store.

MSD Global Compliance, SK Tower, 701, Shahid Tazuddin Road, Mogh Bazar, Dhaka-1217, Bangladesh Tel: +8801731806072, E-mail: [email protected], Web: www.msdglobalcompliance.com

Building 5 ( Two storied)

MSD Global Compliance, SK Tower, 701, Shahid Tazuddin Road, Mogh Bazar, Dhaka-1217, Bangladesh Tel: +8801731806072, E-mail: [email protected], Web: www.msdglobalcompliance.com

DETAILED REPORT

MSD Global Compliance, SK Tower, 701, Shahid Tazuddin Road, Mogh Bazar, Dhaka-1217, Bangladesh Tel: +8801731806072, E-mail: [email protected], Web: www.msdglobalcompliance.com

Non conformance Number Exception-1

Non conformance Number

Exception-2

Objects

Law Code/Reference

The In accordance with Electric act incoming & 1910 section supply cable 1910.303(b)(1),(b)(1)(i),(b)(1) (ii),(b)(1)(iii),(b)(3),(b)(7)(i) Electric equipment shall be free from recognized hazards that are likely to cause death or serious physical harm to employees. Safety of equipment shall be determined using the following considerations. Suitability for installation and use in conformity with the provisions of this subpart. Mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided. Wire-bending and connection space. Completed wiring installations

Objects

Law Code/Reference

Observation

Location

Recommendation

The incoming & supply 1. 1630 KVA – Incoming & supply cable cable placed in drain metering Panel should be placed in dry which fills up with water, (identification no: cable trench. which cause wire CTG insulation damage & FACEL/1365/P&M/ create short circuit electrical equipment)

Observation

Location

Recommendation

shall be free from short circuits and from grounds other than those required or permitted by this subpart. Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings shall be effectively closed to afford protection substantially equivalent to the wall of the equipment. Cable tray for In accordance with Electrical No cable tray used for 1. 630 KVA metering Should be used cable tray cable support Act 1910 section 1910.303(b) cable support Panel (identification for proper wiring. (7)(i) no: CTG MSD Global Compliance, SK Tower, 701, Shahid Tazuddin Road, Mogh Bazar, Dhaka-1217, Bangladesh Unused openings in boxes, FACEL/1365/P&M/ Tel: +8801731806072, E-mail: [email protected], Web: www.msdglobalcompliance.com raceways, auxiliary gutters, electrical equipment) cabinets, equipment cases, or 2. Transformer

TAHURA KHANAM CEO MSD GLOBAL COMPLIANCE

The End

MSD Global Compliance, SK Tower, 701, Shahid Tazuddin Road, Mogh Bazar, Dhaka-1217, Bangladesh Tel: +8801731806072, E-mail: [email protected], Web: www.msdglobalcompliance.com

Related Documents


More Documents from "N P Srinivasarao"