Festo

Standard cylinders DNC, ISO 15552

Standard cylinders DNC, ISO 15552 Key features At a glance

DIN

 Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290)

Cylinder with clamping units DNC-KP

 The modern design and construc­ tion save up to 11% on fitting space compared to ordinary stan­ dard cylinders, thus permitting a considerably more compact system design

 An extensive range of accessories makes it possible to install the cylinder virtually anywhere  The widest range of variants on the market provides the right DNC cylinder for every application

DNCKE  Piston rod can be held or clamped in any position  Piston rod can be held in position for long periods even with alternat­ ing loads, fluctuating operating pressure or leaks in the system

Cylinder with end-position locking DNC- … -EL

 Suitable for use in safety-related control systems in compliance with EN 954-1, EN 1050, EN 292 and EN 983  Fail-safe  Piston rod can be clamped in any position Cylinder/valve combination DNC-V1 … V6

 Mechanical locking when the end position is reached  Lock is only automatically released when pressure is supplied to the cylinder  End-position locking at one or both ends

 The cylinder/valve combination is assembled and fitted with tubing ready for connection  Particularly suitable for decentra­ lised use in larger systems

Tandem cylinder DNCT  Connection of 2 cylinders with the same piston diameter and stroke in series  Double the thrust and return force in comparison to a standard cylinder

Longer service life thanks to the bellows kit DADB

1

2

The bellows kit is a leak-free system. To prevent unwanted media being drawn in, the supply and exhaust air must be ducted via a pressure com­ pensation hole in the connection part 1.

è Internet: www.festo.com/catalog/...

The kit protects the piston rod, seal and bearings from a wide range of media, for example:  dust,  chips,  oil,  grease,  fuel.

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Key features Variants from the modular product system Symbol Key features

ÓÓÓÓÓ ÓÓÓÓÓ ÓÓÓÓÓ

Description

S2

Through piston rod

For working at both ends with the same force in the forward and return stroke, for attaching external stops

S6

Heat-resistant seals

Temperature resistance up to max. 120 °C

S10

Constant motion (slow speed) at low piston speeds

S11

Low friction

S20

Through, hollow piston rod

Suitable for slow stroke movements at a constant, stick-slip-free speed over the full stroke of the cylinder. Seal contains silicone grease (not free of paint-wetting impairment substances) Special seals considerably reduce system wear. This means a considerably lower response pressure. Seal contains silicone grease (not free of paint-wetting impairment substances) For supplying vacuum, small parts, media, etc.

K2

Extended male piston rod thread

–

K3

Female piston rod thread

–

K5

Special piston rod thread

Metric standard thread to ISO

K7

Piston rod with external hexagon

Special spanner flats

K8

Extended piston rod

–

K10

Smooth anodised aluminium piston rod

KP

With clamping unit

Ideal for use in welding environments: – Protection against welding spatter – Small working loads – Harder surface compared to steel – Long service life Integrated clamping unit on the piston rod

EL

With end-position locking

Positive locking in the end position as a drop guard. If there is a drop in pres­ sure, the piston rod is secured in its end position to prevent it from dropping

Q

Square piston rod

Protection against rotation. For correctly oriented feeding

R3

High corrosion protection

R8

Dust protection (wiper seal)

All external cylinder surfaces comply with corrosion resistance class 3 to Festo standard 940 070. The piston rod is made from corrosion and acid-resistant steel The cylinder is equipped with a hard-chrome plated piston rod and a rigid wiper seal, which protects against dry, dusty media

Software tools è www.festo.com Configuration of Festo modular products è www.festo.com

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

3

Standard cylinders DNC, ISO 15552

[mm]

[mm]

DNC

32, 40, 50, 63, 80, 100, 125

20, 25, 30, 40, 10 … 2000 50, 60, 70, 80, 100, 125, 150, 160, 200, 250, 300, 320, 400, 500

Standard hole pattern, with clamping unit DNC-KP 32, 40, 50, 63, 80, 100, 125 DNCKE 40, 63, 100

–

–

Standard hole pattern, with end-position locking DNC-…-EL 32, 40, – 50, 63, 80, 100

Standard hole pattern, cylinder/valve combination DNC-V1 … V6 32, 40, – 50, 63, 80, 100

Standard hole pattern, tandem cylinder DNCT 32, 40, 50 63, 80, 100, 125

4

–

è Internet: www.festo.com/catalog/...

A

Q

S2/S20

K2

Special piston rod thread

Stroke Female piston rod thread

Basic version

Piston j

Extended male piston rod thread

Doubleacting

Type

Through/hollow piston rod

Design

Position sensing

Function

Protection against rotation

Product range overview

K3

K5

n

n

n

n

n

n

n

n

n S2

n

n

n

n

–

–

–

–

–

n

–

n S2

n

n

n

n

n

n

n

n

n

n

–

–

–

–

–

10 … 2000

10 … 2000

10 … 2000

100 … 2000

2 … 500 3 … 500

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Product range overview è Page/Internet

K7

K8

K10

S6

S10

S11

R3

Cylinder/valve combina­ tion

Dust protection

High corrosion protection

Low friction

Slow speed (constant motion)

Heat-resistant seals to max. 120 °C

Smooth anodised piston rod

Extended piston rod

Special spanner flats

Type

V1 … V6

R8

Basic version DNC

9 n

n

n

n

n

n

n

n

–

Standard hole pattern, with clamping unit DNC-KP n

n

25 –

–

–

–

–

–

n

DNCKE

2 –

–

–

–

–

–

–

–

–

Standard hole pattern, with end-position locking DNC-…-EL –

n

–

33 –

–

–

–

–

–

Standard hole pattern, cylinder/valve combination DNC-V1 … V6 n

n

n

40 –

n

n

–

n

n

Standard hole pattern, tandem cylinder DNCT –

2017/10 – Subject to change

–

2 –

n

–

–

–

–

è Internet: www.festo.com/catalog/...

–

5

Standard cylinders DNC, ISO 15552 Peripherals overview

1 2 5

3

9 8

4

7

6

6 9

bH

bI

aJ aB

bG

aA

aD

aA

aC 5

aB aE

aF

bF aI

aG

bJ

aH

bE bA

aJ

bB

bD

2 3

4 5

DNC-…-S2

bC

Mounting attachments and accessories Description 1 2 3

4

5 6 7 8

6

Multi-position kit DPNC Foot mounting HNC/CRHNC Flange mounting FNC/CRFNG Trunnion flange ZNCF/CRZNG Trunnion support LNZG/CRLNZG Swivel flange SNC Clevis foot LSNG Clevis foot LSNSG

For connecting two cylinders with identical piston diameters to form a multi-position cylinder For bearing or end caps

DNC Basic version KP

V1 … V6

EL

è Page/ Internet

n1)

n

n

n1)

49

n

n

n

n

50

n

n

n

n

n

n

n

n

n

n

n

n

54

For end caps

n1)

n1)

n

n1)

55

With spherical bearing

n1)

n1)

n

n1)

59

Weld-on, with spherical bearing

n1)

n1)

n

n1)

59

– For bearing or end caps – Cannot be used on the bearing cap in combination with bellows kit DADB – For bearing or end caps – Cannot be used on the bearing cap in combination with bellows kit DADB –

è Internet: www.festo.com/catalog/...

51

52

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Peripherals overview Mounting attachments and accessories Description 9 aJ aA aB aC aD aE aF aG aH aI

bJ bA bB bC

bD

bE bF bG bH bI

1) 2)

DNC Basic version KP

V1 … V6

EL

è Page/ Internet

Swivel flange SNCS/CRNCS/SNCS-…-R3 Clevis foot LBG/LBG-…-R3 Swivel flange SNCL Swivel flange SNCB/SNCB-…-R3 Clevis foot LNG/CRLNG Clevis foot LSN Trunnion mounting kit DAMT Rod eye SGS/CRSGS Right-angle clevis foot LQG Rod clevis SGA Coupling piece KSG Coupling piece KSZ Rod clevis SG/CRSG Self-aligning rod coupler FK/CRFK Adapter AD Guide unit FENG

With spherical bearing for end caps

n1)

n1)

n

n1)

57

–

n1)

n

n

n1)

59

For end caps

n1)

n1)

n

n1)

57

For end caps

n1)

n1)

n

n1)

56

–

n1)

n1)

n

n1)

59

With spherical bearing

n1)

n1)

n

n1)

59

For mounting anywhere along the cylinder profile barrel With spherical bearing

n

n

n

n

53

n

n

n

n

60

–

n

n

n

n

59

With male thread

n

n

n

n

60

n

n

n

n

n

n

n

n

n

n

n

n

60

n

n

n

n

60

n

–

–

n

60

–

–

Mounting kit SMB-8-FENG

For attaching proximity sensor SMT-8 to cylinders in combination with guide unit FENG

n

–

Slot cover ABP-5-S Proximity sensor SME/SMT-8 One-way flow control valve GRLA Push-in fitting QS Bellows kit DADB

For protecting the sensor cables and keeping dirt out of the sensor slots Can be integrated in the cylinder profile barrel

n

n

n

n

66

n

n

n

n

66

For regulating speed

n

n

n

n

67

For connecting compressed air tubing with standard outside diameter – Protects the cylinder (piston rod, seal and bearings) against a wide range of media and thus prevents premature wear – The kit can only be used in combination with an extended piston rod (K8)

n

n

n

n

qs

To compensate for radial deviations For cylinders with a non-rotating piston rod to compensate for radial deviations Permits a swivelling movement of the cylinder in one plane For compensating radial and angular deviations For fitting a suction cup on a hollow cylinder piston rod For protecting standard cylinders against rotation at high torque loads

n

n2)

n  50 and above n  50 and above

60 60

65

65

61 n

–

n

n

Not with variant S2 or S20 For piston  32, 40 mm only with variant R3

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

7

Standard cylinders DNC, ISO 15552 Type codes u

DNC

—

80

—

320

—

PPV

—

A

Type Double-acting DNC

Standard cylinder

Piston j [mm] Stroke [mm] Cushioning P PPV

Flexible cushioning rings/pads at both ends Pneumatic cushioning, adjustable at both ends

Position sensing Without position sensing Via proximity sensor

A

-H-

Note

The standard cylinder DNC can be ordered using either a fixed part number and type designation or via the modular product system. The type code listed above only

8

applies to the DNC standard cylinder with fixed part number and type designation. Variants can only be ordered using the modular product system.

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Technical data

-N-

Function DNC-… Without position sensing

-T-W-

Diameter 32 … 125 mm Stroke length 10 … 2000 mm

www.festo.com Wearing parts kits è page 24

DNC-…-A-… With position sensing

DIN

 Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290)

General technical data Piston  Pneumatic connection Piston rod thread K3 K5 Constructional design

Max. torsional backlash of piston rod [°] Cushioning

Q

Cushioning length PPV Position sensing Type of mounting

[mm]

Mounting position

32

40

50

63

80

100

125

G1/8 M10x1.25 M6 M10 Piston Piston rod Profile barrel ±0.65

G1/4 M12x1.25 M8 M12

G1/4 M16x1.5 M10 M16

G3/8 M16x1.5 M10 M16

G3/8 M20x1.5 M12 M20

G1/2 M20x1.5 M12 M20

G1/2 M27x2 M16 M27

±0.6

±0.45

±0.45

±0.45

±0.45

–

22

32

32

42

Flexible cushioning rings/pads at both ends Pneumatic cushioning, adjustable at both ends 20 20 22 Via proximity sensor Via female thread Via accessories Any

-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

9

Standard cylinders DNC, ISO 15552 Technical data Operating and environmental conditions Piston  32 Operating medium Note on operating/pilot medium Operating pressure [bar] R8 S11

Ambient temperature1) [°C] Corrosion resistance class CRC2) Certification ATEX 1) 2)

S6 R3

50

63

80

100

125

0.6 … 10 1.5 … 10 0.06 … 10 0.1 … 10

Note operating range of proximity sensors Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications. Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.

Force [N] and impact energy [J] Piston  Theoretical force at 6 bar, advancing Theoretical force at 6 bar, retracting Max. impact energy at the end positions1) 1)

40

Compressed air in accordance with ISO 8573­1:2010 [7:4:4] Operation with lubricated medium possible (in which case lubricated operation will always be required) 0.6 … 12 1.5 … 12 After 10 strokes 0.16 … 12 0.1 … 12 0.06 … 12 After 24 hours 0.3 … 12 0.2 … 12 0.1 … 12 –20 … +80 0 … 120 2 3 Germanischer Lloyd Specified types è www.festo.com

S2/S20 S2/S20

32

40

50

63

80

100

125

483 415 415 415 0.1

754 633 633 633 0.2

1178 990 990 990 0.2

1870 1682 1682 1682 0.5

3016 2721 2721 2721 0.9

4712 4418 4418 4418 1.2

7363 6881 6881 6881 5

The permissible impact energy is reduced by approx. 10% for variants K10 and S20

Permissible impact velocity:

vperm. +

Ǹ

2xE perm. mdead ) mload

2xEperm.  *mdead v2

Maximum permissible load:

mload +

10

è Internet: www.festo.com/catalog/...

vperm. Eperm. mIntrinsic mLoad

Permissible impact velocity Max. impact energy Moving load (drive) Moving effective load

-H-

Note

This data represents the maximum values that can be achieved. The maximum permissible impact energy must be observed.

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Technical data Lateral force Fq as a function of stroke length l Basic version

Fq

    

2017/10 – Subject to change

32 40 50/63 80/100 125

è Internet: www.festo.com/catalog/...

11

Standard cylinders DNC, ISO 15552 Technical data

Max. torque = 1100 Nmm / Max. stroke = 400 mm

Fq [N]

Fq [N]

Max. torque = 800 Nmm / Max. stroke = 300 mm

s [mm]

 40

s [mm]

Lateral force Fq as a function of stroke length l and lever arm s Q – Square piston rod  32

l [mm]

Max. torque = 3000 Nmm / Max. stroke = 600 mm

s [mm]

Fq [N]

 80/100

Max. torque = 1500 Nmm / Max. stroke = 500 mm

Fq [N]

 50/63

s [mm]

l [mm]

l [mm]

l [mm]

Examples for piston  32 mm Example 1: Stroke length l = 150 mm Result: permissible Lateral force Fq = 9.5 N Lever arm s = 84 mm

12

Example 2: Lateral force Fq = 40 N Result: permissible Stroke length l = 28 mm Lever arm s = 20 mm

è Internet: www.festo.com/catalog/...

Example 3: Stroke length l = 150 mm Lever arm s = 100 mm Max. torque 800 Nmm Fq = Lever arm 100 mm =8N Result: permissible Fq = 8 N Fqmax. = 9.5 N

Fq

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Technical data Weight [g] Piston 

32

40

50

63

80

100

125

Basic version Product weight with 0 mm stroke Additional weight per 10 mm stroke

517 30

800 45

1260 64

1709 73

2790 106

4653 115

6771 168

Moving load with 0 mm stroke Additional load per 10 mm stroke

162 9

307 16

538 25

663 25

1131 38

1544 38

2809 63

Q – Square piston rod Product weight with 0 mm stroke Additional weight per 10 mm stroke

504 29

738 41

1187 60

1632 68

2652 99

4508 108

– –

Moving load with 0 mm stroke Additional load per 10 mm stroke

149 8

244 11

465 20

587 20

994 31

1399 31

– –

S2 – Through piston rod Product weight with 0 mm stroke Additional weight per 10 mm stroke

576 39

895 61

1390 89

1917 98

3114 144

5297 153

7529 231

Moving load with 0 mm stroke Additional load per 10 mm stroke

170 18

330 32

560 50

711 50

1200 76

1660 76

2925 126

K10 – Smooth anodised piston rod Product weight with 0 mm stroke Additional weight per 10 mm stroke

443 24

655 35

1001 47

1437 57

2302 81

4138 90

5719 127

Moving load with 0 mm stroke Additional load per 10 mm stroke

88 3

162 6

279 8

391 9

643 13

1029 13

1757 22

S2-K10 – Through, smooth anodised piston rod Product weight with 0 mm stroke 514 Additional weight per 10 mm stroke 27

766 40

1181 56

1676 65

2701 94

4821 103

6674 148

Moving load with 0 mm stroke Additional load per 10 mm stroke

201 11

351 17

470 17

787 26

1184 26

2070 43

2017/10 – Subject to change

108 6

è Internet: www.festo.com/catalog/...

13

Standard cylinders DNC, ISO 15552 Technical data Materials Sectional view 3

2

1

2

Standard cylinder

Basic version

1 2 3 –

Wrought aluminium alloy, smooth anodised Die-cast aluminium High-alloy steel Wrought aluminium alloy, anodised Polyurethane, nitrile rubber RoHS compliant

Profile barrel Bearing and end caps Piston rod Seals Note on materials

K10

Standard cylinder

R8

1 2 3

Profile barrel Bearing and end caps Piston rod

–

Seals Note on materials

Wrought aluminium alloy, smooth anodised Die-cast aluminium Tempered steel, High-alloy steel hard-chromium plated Polyurethane, nitrile rubber Fluoro rubber RoHS compliant –

14

S6

è Internet: www.festo.com/catalog/...

R3

S10

High-alloy stainless steel

S11

Contains PWIS (paint-wetting impairment substances)

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Technical data Download CAD data è www.festo.com

Dimensions – Basic version

1 For mounting attachments:  32 … 100: Socket head screw with female thread  125: Thread in the end cap 



3 Slot for proximity sensor SME/SMT-8

+

= plus stroke length

AM

B  d11

BG

E

EE

J2

J3

KK

L1

L2

22 24 32 32 40 40 54

30 35 40 45 45 55 60

16 16 17 17 17 17 22

45 54 64 75 93 110 134

G1/8 G1/4 G1/4 G3/8 G3/8 G1/2 G1/2

6 8 10.4 12.4 12.5 12 13

5.2 6 8.5 10 8 10 8

M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5 M27x2

18 21.5 28 28.5 34.7 38.2 46

94 105 106 121 128 138 160

[mm] 32 40 50 63 80 100 125

2 Regulating screw for adjustable end-position cushioning

L7

MM 

PL

RT

TG

VA

VD

WH

ZJ

ß1

ß2

ß3

3.3 3.6 5.1 6.6 10.5 8 14

12 16 20 20 25 25 32

15.6 14 14 17 16.4 18.8 18

M6 M6 M8 M8 M10 M10 M12

32.5 38 46.5 56.5 72 89 110

4 4 4 4 4 4 6

10 10.5 11.5 15 15.7 19.2 20.5

26 30 37 37 46 51 65

120 135 143 158 174 189 225

10 13 17 17 22 22 27

16 18 24 24 30 30 36

6 6 8 8 6 6 8

[mm] 32 40 50 63 80 100 125

-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

15

Standard cylinders DNC, ISO 15552 Technical data Download CAD data è www.festo.com

Dimensions – Variants Q – Square piston rod

S2 – Through piston rod

+ = plus stroke length ++ = plus 2x stroke length S20 – Through hollow piston rod

+ = plus stroke length ++ = plus 2x stroke length 

B1 o

D8 

ZJ

ZM

10 12 16 16 20 20 –

4.5 5.5 81) 8 11.7 11.7 13

120 135 143 158 174 189 225

148 167 183 199 222 240 291

[mm] 32 40 50 63 80 100 125 1) 2)

16

Internal narrowing to  5.5 mm Internal narrowing to  10.2 mm

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Technical data Download CAD data è www.festo.com

Dimensions – Variants K2 – Extended male piston rod thread

K3 – Female piston rod thread

K5 – Special piston rod thread

K7 – Piston rod with external hexagon

K8 – Extended piston rod

-H-

Note

In combination with variant S2/S20, the piston rod is extended at one



A1 max.

A2 max.

AF

35 35 70 70 70 70 70

500 500 500 500 500 500 500

12 12 16 16 20 20 32

AM

KF

KK Basic thread

Special thread1)

M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5 M27x2

M10 M12 M16 M16 M20 M20 M27

[mm] 32 40 50 63 80 100 125 1)

22 24 32 32 40 40 54

M6 M8 M10 M10 M12 M12 M16

end. In combination with variant Q, the square piston rod is extended.

T4

WH

ß1

2.6 3.3 4.7 4.7 6.1 6.1 8

26 30 37 37 46 51 65

10 13 17 17 22 22 27

The special threads are only available as male threads. The mounting nut on the piston rod thread is included in the scope of delivery

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

17

Standard cylinders DNC, ISO 15552 Technical data Ordering data – Without position sensing Piston  Stroke Part No. [mm] [mm]

Type1)

Piston  [mm]

Stroke [mm]

Part No.

Type1)

32

25 40 50 80 100 125 160 200 250 320 400 500

163319 163320 163321 163322 163323 163324 163325 163326 163327 163328 163329 163330

DNC-32-25-PPV DNC-32-40-PPV DNC-32-50-PPV DNC-32-80-PPV DNC-32-100-PPV DNC-32-125-PPV DNC-32-160-PPV DNC-32-200-PPV DNC-32-250-PPV DNC-32-320-PPV DNC-32-400-PPV DNC-32-500-PPV

40

25 40 50 80 100 125 160 200 250 320 400 500

163351 163352 163353 163354 163355 163356 163357 163358 163359 163360 163361 163362

DNC-40-25-PPV DNC-40-40-PPV DNC-40-50-PPV DNC-40-80-PPV DNC-40-100-PPV DNC-40-125-PPV DNC-40-160-PPV DNC-40-200-PPV DNC-40-250-PPV DNC-40-320-PPV DNC-40-400-PPV DNC-40-500-PPV

50

25 40 50 80 100 125 160 200 250 320 400 500

163383 163384 163385 163386 163387 163388 163389 163390 163391 163392 163393 163394

DNC-50-25-PPV DNC-50-40-PPV DNC-50-50-PPV DNC-50-80-PPV DNC-50-100-PPV DNC-50-125-PPV DNC-50-160-PPV DNC-50-200-PPV DNC-50-250-PPV DNC-50-320-PPV DNC-50-400-PPV DNC-50-500-PPV

63

25 40 50 80 100 125 160 200 250 320 400 500

163415 163416 163417 163418 163419 163420 163421 163422 163423 163424 163425 163426

DNC-63-25-PPV DNC-63-40-PPV DNC-63-50-PPV DNC-63-80-PPV DNC-63-100-PPV DNC-63-125-PPV DNC-63-160-PPV DNC-63-200-PPV DNC-63-250-PPV DNC-63-320-PPV DNC-63-400-PPV DNC-63-500-PPV

80

25 40 50 80 100 125 160 200 250 320 400 500

163447 163448 163449 163450 163451 163452 163453 163454 163455 163456 163457 163458

DNC-80-25-PPV DNC-80-40-PPV DNC-80-50-PPV DNC-80-80-PPV DNC-80-100-PPV DNC-80-125-PPV DNC-80-160-PPV DNC-80-200-PPV DNC-80-250-PPV DNC-80-320-PPV DNC-80-400-PPV DNC-80-500-PPV

100

25 40 50 80 100 125 160 200 250 320 400 500

163479 163480 163481 163482 163483 163484 163485 163486 163487 163488 163489 163490

DNC-100-25-PPV DNC-100-40-PPV DNC-100-50-PPV DNC-100-80-PPV DNC-100-100-PPV DNC-100-125-PPV DNC-100-160-PPV DNC-100-200-PPV DNC-100-250-PPV DNC-100-320-PPV DNC-100-400-PPV DNC-100-500-PPV

125

25 40 50 80 100 125 160 200 250 320 400 500

163511 163512 163513 163514 163515 163516 163517 163518 163519 163520 163521 163522

DNC-125-25-PPV DNC-125-40-PPV DNC-125-50-PPV DNC-125-80-PPV DNC-125-100-PPV DNC-125-125-PPV DNC-125-160-PPV DNC-125-200-PPV DNC-125-250-PPV DNC-125-320-PPV DNC-125-400-PPV DNC-125-500-PPV

1)

18

The mounting nut on the piston rod thread is included in the scope of delivery

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Technical data Ordering data – With position sensing Piston  Stroke Part No. [mm] [mm]

Type1)

Piston  [mm]

Stroke [mm]

Part No.

Type1)

32

20 25 30 40 50 60 70 80 100 125 150 160 200 250 300 320 400 500

1922617 163305 1922618 163306 163307 1922619 1922620 163308 163309 163310 1922621 163311 163312 163313 1922622 163314 163315 163316

DNC-32-20-PPV-A DNC-32-25-PPV-A DNC-32-30-PPV-A DNC-32-40-PPV-A DNC-32-50-PPV-A DNC-32-60-PPV-A DNC-32-70-PPV-A DNC-32-80-PPV-A DNC-32-100-PPV-A DNC-32-125-PPV-A DNC-32-150-PPV-A DNC-32-160-PPV-A DNC-32-200-PPV-A DNC-32-250-PPV-A DNC-32-300-PPV-A DNC-32-320-PPV-A DNC-32-400-PPV-A DNC-32-500-PPV-A

40

20 25 30 40 50 60 70 80 100 125 150 160 200 250 300 320 400 500

1922623 163337 1922624 163338 163339 1922625 1922626 163340 163341 163342 1922627 163343 163344 163345 1922628 163346 163347 163348

DNC-40-20-PPV-A DNC-40-25-PPV-A DNC-40-30-PPV-A DNC-40-40-PPV-A DNC-40-50-PPV-A DNC-40-60-PPV-A DNC-40-70-PPV-A DNC-40-80-PPV-A DNC-40-100-PPV-A DNC-40-125-PPV-A DNC-40-150-PPV-A DNC-40-160-PPV-A DNC-40-200-PPV-A DNC-40-250-PPV-A DNC-40-300-PPV-A DNC-40-320-PPV-A DNC-40-400-PPV-A DNC-40-500-PPV-A

50

20 25 30 40 50 60 70 80 100 125 150 160 200 250 300 320 400 500

1922629 163369 1922630 163370 163371 1922631 1922632 163372 163373 163374 1922633 163375 163376 163377 1922634 163378 163379 163380

DNC-50-20-PPV-A DNC-50-25-PPV-A DNC-50-30-PPV-A DNC-50-40-PPV-A DNC-50-50-PPV-A DNC-50-60-PPV-A DNC-50-70-PPV-A DNC-50-80-PPV-A DNC-50-100-PPV-A DNC-50-125-PPV-A DNC-50-150-PPV-A DNC-50-160-PPV-A DNC-50-200-PPV-A DNC-50-250-PPV-A DNC-50-300-PPV-A DNC-50-320-PPV-A DNC-50-400-PPV-A DNC-50-500-PPV-A

63

20 25 30 40 50 60 70 80 100 125 150 160 200 250 300 320 400 500

1922635 163401 1922636 163402 163403 1922637 1922638 163404 163405 163406 1922639 163407 163408 163409 1922640 163410 163411 163412

DNC-63-20-PPV-A DNC-63-25-PPV-A DNC-63-30-PPV-A DNC-63-40-PPV-A DNC-63-50-PPV-A DNC-63-60-PPV-A DNC-63-70-PPV-A DNC-63-80-PPV-A DNC-63-100-PPV-A DNC-63-125-PPV-A DNC-63-150-PPV-A DNC-63-160-PPV-A DNC-63-200-PPV-A DNC-63-250-PPV-A DNC-63-300-PPV-A DNC-63-320-PPV-A DNC-63-400-PPV-A DNC-63-500-PPV-A

1)

The mounting nut on the piston rod thread is included in the scope of delivery

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

19

Standard cylinders DNC, ISO 15552 Technical data Ordering data – With position sensing Piston  Stroke Part No. [mm] [mm]

Type1)

80

20 25 30 40 50 60 70 80 100 125 150 160 200 250 300 320 400 500

1922641 163433 1922642 163434 163435 1922643 1922644 163436 163437 163438 1922645 163439 163440 163441 1922646 163442 163443 163444

DNC-80-20-PPV-A DNC-80-25-PPV-A DNC-80-30-PPV-A DNC-80-40-PPV-A DNC-80-50-PPV-A DNC-80-60-PPV-A DNC-80-70-PPV-A DNC-80-80-PPV-A DNC-80-100-PPV-A DNC-80-125-PPV-A DNC-80-150-PPV-A DNC-80-160-PPV-A DNC-80-200-PPV-A DNC-80-250-PPV-A DNC-80-300-PPV-A DNC-80-320-PPV-A DNC-80-400-PPV-A DNC-80-500-PPV-A

100

25 40 50 80 100 125 160 200 250 320 400 500

163465 163466 163467 163468 163469 163470 163471 163472 163473 163474 163475 163476

DNC-100-25-PPV-A DNC-100-40-PPV-A DNC-100-50-PPV-A DNC-100-80-PPV-A DNC-100-100-PPV-A DNC-100-125-PPV-A DNC-100-160-PPV-A DNC-100-200-PPV-A DNC-100-250-PPV-A DNC-100-320-PPV-A DNC-100-400-PPV-A DNC-100-500-PPV-A

125

25 40 50 80 100 125 160 200 250 320 400 500

163497 163498 163499 163500 163501 163502 163503 163504 163505 163506 163507 163508

DNC-125-25-PPV-A DNC-125-40-PPV-A DNC-125-50-PPV-A DNC-125-80-PPV-A DNC-125-100-PPV-A DNC-125-125-PPV-A DNC-125-160-PPV-A DNC-125-200-PPV-A DNC-125-250-PPV-A DNC-125-320-PPV-A DNC-125-400-PPV-A DNC-125-500-PPV-A

1)

20

The mounting nut on the piston rod thread is included in the scope of delivery

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Technical data Ordering data – Variable stroke Piston  Stroke [mm] [mm]

Without position sensing Part No. Type1)

32 40 50 63 80 100 125

163318 163350 163382 163414 163446 163478 163510

1)

10 … 2000 10 … 2000 10 … 2000 10 … 2000 10 … 2000 10 … 2000 10 … 2000

DNC-32-…-PPV DNC-40-…-PPV DNC-50-…-PPV DNC-63-…-PPV DNC-80-…-PPV DNC-100-…-PPV DNC-125-…-PPV

The mounting nut on the piston rod thread is included in the scope of delivery

Ordering data – Variable stroke Piston  Stroke [mm] [mm]

With position sensing Part No. Type1)

32 40 50 63 80 100 125

163304 163336 163368 163400 163432 163464 163496

1)

10 … 2000 10 … 2000 10 … 2000 10 … 2000 10 … 2000 10 … 2000 10 … 2000

DNC-32-…-PPV-A DNC-40-…-PPV-A DNC-50-…-PPV-A DNC-63-…-PPV-A DNC-80-…-PPV-A DNC-100-…-PPV-A DNC-125-…-PPV-A

The mounting nut on the piston rod thread is included in the scope of delivery

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

21

Standard cylinders DNC, ISO 15552 Ordering data – Modular products Ordering table Size

32

40

50

63

80

100

125

0 M Module No.

163302

163334

163366

163398

163430

163462

163494

100

125

Function Piston  Stroke Cushioning 0 O Position sensing Protection against rotation Type of piston rod Extended male thread Female thread Special thread ê

Standard cylinder, double-acting, based on ISO 15552 [mm] 32 40 50 63 80 [mm] 10 … 2000 Flexible cushioning rings/pads at both ends Pneumatic cushioning, adjustable at both ends Via proximity sensor Square piston rod Through piston rod Through, hollow piston rod Piston rod with extended male thread [mm] 1 … 35 1 … 70 Piston rod with female thread (M6) (M8) (M10) (M10) Piston rod with special thread M10 M12 M16 M16

aE

PPV For piston  125 not with S11

2

Q

3

S2

Condi­ tions

–

Code

Enter code

DNC

aE

DNC -… -… -P -PPV

2 3 4

-A -Q -S2 -S20

5

-…K2

(M12)

(M12)

(M16)

6

-K3

M20

M20

M27

7

-…K5

4

S20 Max. stroke: 850 mm.

In combination with S2: square piston rod at bearing cap end only.

5

K2

Not with K3, K10

Not with S20, K7, K10, S10, S11, R8

6

K3

With K5: on request.

7

K5

Max. stroke: 10 … 1500 mm.

Not with K2, K3, K5, K8, K10, S6, S10, S11, R8

In combination with K2: thread extended at both ends.

Not with K7

In combination with K3: female thread at both ends.

Not with K10

In combination with K5: special thread at both ends. In combination with K8: piston rod extended at bearing cap end only. Not with K7, S10, S11

Transfer order code DNC

22

–

–

–

–

è Internet: www.festo.com/catalog/...

–

–

–

–

–

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Ordering data – Modular products Ordering table Size

32

40

50

63

80

100

125

ê Special spanner flats 0 O Extended piston rod

Piston rod with external hexagon Extended piston rod [mm] 1 … 500 Improved running performance Smooth anodised aluminium coated piston rod Temperature resistance Heat-resistant seals for temperatures up to 120 °C Slow speed (constant motion) Slow speed (constant motion at low piston speeds) Running characteristics Low friction Corrosion protection High corrosion protection Wiper seal Dust protection

8 K7

Not with Q, S2, K10

9 K10

Max. stroke: 1,000 mm.

aB S10

Not with S10, S11, R8

Transfer order code –

2017/10 – Subject to change

8

-K7

9 aJ aB aC aD

-…K8 -K10 -S6 -S10 -S11 -R3 -R8

Enter code

Max. stroke: 500 mm; additional strokes on request. Max. stroke: 500 mm; additional strokes on request. Not with R3, R8

aD CT, R3

–

–

Code

Not with S11, R3, R8 aC S11

Not with S6, R3, R8 aJ S6

–

Condi­ tions

–

–

–

Not with R8

–

è Internet: www.festo.com/catalog/...

–

–

23

Standard cylinders DNC, ISO 15552 Ordering data Wearing parts kits Part No. Piston  32 40 50 63 80 100 125

24

Type

Part No.

Basic version 369195 DNC-32-…-PPV-(A) 369196 DNC-40-…-PPV-(A) 369197 DNC-50-…-PPV-(A) 369198 DNC-63-…-PPV-(A) 369199 DNC-80-…-PPV-(A) 369200 DNC-100-…-PPV-(A) 369201 DNC-125-…-PPV-(A)

è Internet: www.festo.com/catalog/...

Type

S6 – Heat-resistant seals up to max. 120 °C 384214 DNC-32-…-PPV-(A)-S6 384215 DNC-40-…-PPV-(A)-S6 384216 DNC-50-…-PPV-(A)-S6 384217 DNC-63-…-PPV-(A)-S6 384218 DNC-80-…-PPV-(A)-S6 384219 DNC-100-…-PPV-(A)-S6 384220 DNC-125-…-PPV-(A)-S6

Subject to change – 2017/10

Standard cylinders DNC-KP, standard hole pattern, with clamping unit Technical data

-N-

Function DNC-…-KP Without position sensing

-T-W-

Diameter 32 … 125 mm Stroke length 10 … 2000 mm

www.festo.com Wearing parts kits è page 32

DNC-…-A-…-KP With position sensing

-H-

Note

Additional measures are required for use in safety-related applications; in Europe, for example, the standards listed under the EC Machinery Directive must be observed. Without

General technical data Piston  Pneumatic connection

32 Cylinder KP

Piston rod thread

Axial play under load Constructional design

K3 K5 [mm]

Cushioning Cushioning length PPV Position sensing Type of mounting

[mm]

Mounting position Clamping type with effective direction

40

50

G1/8 G1/4 G1/4 M5 G1/8 G1/8 M10x1.25 M12x1.25 M16x1.5 M6 M8 M10 M10 M12 M16 0.5 0.8 Piston Piston rod Profile barrel Clamping unit Flexible cushioning rings/pads at both ends Pneumatic cushioning, adjustable at both ends 20 20 22 Via proximity sensor Via female thread Via accessories Any At both ends

additional measures in accordance with statutory minimum require­ ments, the product is not suitable for use in safety-related sections of control systems.

63

80

100

125

G3/8 G1/8 M16x1.5 M10 M16

G3/8 G1/8 M20x1.5 M12 M20

G1/2 G1/8 M20x1.5 M12 M20

G1/2 G1/8 M27x2 M16 M27 1.8

22

32

32

42

-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1

Operating and environmental conditions Operating medium Note on operating/pilot medium Operating pressure [bar] Min. release pressure [bar] Ambient temperature1) [°C] Corrosion resistance class CRC2) Certification 1) 2)

Compressed air in accordance with ISO 8573­1:2010 [7:4:4] Operation with lubricated medium possible (in which case lubricated operation will always be required) 1.5 … 10 3 –10 … +80 2 Germanischer Lloyd

Note operating range of proximity sensors Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications.

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

25

Standard cylinders DNC-KP, standard hole pattern, with clamping unit Technical data Impact energy [J] Piston 

32

40

50

63

80

100

125

Max. impact energy at the end positions 0.1

0.2

0.2

0.5

0.9

1.2

5

vperm. +

Permissible impact velocity:

mload +

Maximum permissible load: Forces [N] Piston  Theoretical force at 6 bar, advancing Theoretical force at 6 bar, retracting Static holding force

-H-

S2 S2

vperm. Eperm. mIntrinsic mLoad

2xE perm. mdead ) mload

Permissible impact velocity Max. impact energy Moving load (drive) Moving effective load

2xEperm.  *mdead v2

-H-

Note

This data represents the maximum values that can be achieved. The maximum permissible impact energy must be observed.

32

40

50

63

80

100

125

483 415 415 415 600

754 633 633 633 1000

1178 990 990 990 1400

1870 1682 1682 1682 2000

3016 2721 2721 2721 5000

4712 4418 4418 4418 5000

7363 6881 6881 6881 7500

Note

The specified holding force refers to a static load. If this value is exceeded, slippage may occur. Dynamic forces occurring during operation must not

26

Ǹ

exceed the static holding force. The clamping unit is not backlash-free in the clamped condition if varying loads are applied to the piston rod.

è Internet: www.festo.com/catalog/...

Activation: The clamping unit may only be released if the forces at the piston have reached equilibrium. Otherwise, there is a risk of accidents due to

sudden movement of the piston rod. Blocking off the air supply at both ends (e.g. with a 5/3-way valve) does not provide any safety.

Subject to change – 2017/10

Standard cylinders DNC-KP, standard hole pattern, with clamping unit Technical data Max. lateral force Fq as a function of stroke length l

Fq

    

32 40 50/63 80/100 125

Materials Sectional view 2

3

1

2

4 7 5

6

Standard cylinder 1 2 3 4 5 6 7 –

Profile barrel Bearing and end caps Piston rod Housing, clamping unit Clamping jaws Spring Piston Seals Note on materials

2017/10 – Subject to change

Wrought aluminium alloy, smooth anodised Die-cast aluminium High-alloy steel Wrought aluminium alloy, anodised Brass Spring steel Polyacetal Polyurethane, nitrile rubber RoHS compliant

è Internet: www.festo.com/catalog/...

27

Standard cylinders DNC-KP, standard hole pattern, with clamping unit Technical data Download CAD data è www.festo.com

Dimensions – Basic version

1 For mounting attachments:  32 … 100: Socket head screw with female thread  125: Thread in the end cap 

2 Regulating screw for adjustable end-position cushioning

3 Slot for proximity sensor SME/SMT-8

+

= plus stroke length

AM

B  d11

BG

D1  f9

D2

E

EE

H1

J2

J3

KK

L2

L3

32 40 50 63 80 100 125

22 24 32 32 40 40 54

30 35 40 45 45 55 60

16 16 17 17 17 17 22

20 24 30 38 48 48 65

M5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8

45 54 64 75 93 110 134

G1/8 G1/4 G1/4 G3/8 G3/8 G1/2 G1/2

67 88 107 123 165.5 174 207

6 8 10.4 12.4 12.5 12 13

5.2 6 8.5 10 8 10 8

M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5 M27x2

94 105 106 121 128 138 160

45 53 67 76 95 98 125



L5

L7

MM 

PL

RT

TG

VA

VD

WH

ZJ

ß1

ß2

ß3

14 16 20 24 31.5 31 42

3.3 3.6 5.1 6.6 10.5 8 14

12 16 20 20 25 25 32

15.6 14 14 17 16.4 18.8 18

M6 M6 M8 M8 M10 M10 M12

32.5 38 46.5 56.5 72 89 110

4 4 4 4 4 4 6

11.5 11.5 11 11 12.5 12 27.5

26 30 37 37 46 51 65

165 188 210 234 269 287 350

10 13 17 17 22 22 27

16 18 24 24 30 30 36

6 6 8 8 6 6 8

[mm]

[mm] 32 40 50 63 80 100 125

-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1

-H-

Note

The dimensions for the cylinder/ valve combination are on page è page 44

28

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC-KP, standard hole pattern, with clamping unit Technical data Download CAD data è www.festo.com

Dimensions – Variants Q – Square piston rod

-H-

Note

Clamping unit and variant Q only in combination with S2. S2 – Through piston rod

+ = plus stroke length ++ = plus 2x stroke length

-H-

Note

The thread types at both piston rod ends are identical.

In combination with variant Q, the left-hand piston rod is round,

the right-hand piston rod square. The clamping unit is mounted on

K2 – Extended male piston rod thread

K3 – Female piston rod thread

K5 – Special piston rod thread

K7 – Piston rod with external hexagon

the left-hand, round piston rod.

K8 – Extended piston rod

-H-

Note

In combination with variant S2, the piston rod is extended at one end. The clamping unit is mounted on the



A1 max.

A2 max.

AF

35 35 70 70 70 70 70

500 500 500 500 500 500 500

12 12 16 16 20 20 32

AM

B1 o

KF

10 12 16 16 20 20 –

M6 M8 M10 M10 M12 M12 M16

[mm] 32 40 50 63 80 100 125 1)

22 24 32 32 40 40 54

side of the piston rod that is not ex­ tended. If variant Q is also required,

KK Basic thread

Special thread1)

M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5 M27x2

M10 M12 M16 M16 M20 M20 M27

the extension will only be added to the square piston rod.

T4

WH

ZJ

ZM

ß1

2.6 3.3 4.7 4.7 6.1 6.1 8

26 30 37 37 46 51 65

165 188 210 234 269 287 350

193 220 250 275 317 338 416

10 13 17 17 22 22 27

The special threads are only available as male threads. The mounting nut on the piston rod thread is included in the scope of delivery

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

29

Standard cylinders DNC-KP, standard hole pattern, with clamping unit Ordering data – Modular products Ordering table Size

32

40

50

63

80

100

125

0 M Module No.

163302

163334

163366

163398

163430

163462

163494

Function Piston  Stroke Cushioning

Standard cylinder, double-acting, standard hole pattern, with clamping unit [mm] 32 40 50 63 80 100 125 [mm] 10 … 2000 Flexible cushioning rings/pads at both ends Pneumatic cushioning, adjustable at both ends

0 O Position sensing Protection against rotation ê Type of piston rod 1

Q

Condi­ tions

Via proximity sensor Square piston rod Through piston rod

1 2

–

2

Max. stroke: 10 … 1500 mm

S2

Code

Enter code

DNC -… -… -P -PPV

DNC

-A -Q -S2

In combination with K2: extended thread at both ends

In combination with S2: square piston rod at bearing cap end only

In combination with K3: female thread at both ends

In combination with KP: only supplied with S2

In combination with K5: special thread at both ends

Not with K7

In combination with K8: piston rod extended at bearing cap end only In combination with KP: clamping unit at end cap Not with K7

Transfer order code DNC

30

–

–

–

è Internet: www.festo.com/catalog/...

–

–

–

Subject to change – 2017/10

Standard cylinders DNC-KP, standard hole pattern, with clamping unit Ordering data – Modular products Ordering table Size

32

40

50

63

80

100

125

ê Extended male thread 0 O Female thread

Piston rod with extended male thread [mm] 1 … 35 1 … 70 Piston rod with female thread (M6) (M8) (M10) (M10) (M12) (M12) Special thread Piston rod with special thread M10 M12 M16 M16 M20 M20 Special spanner flats Piston rod with external hexagon Extended piston rod Extended piston rod [mm] 1 … 500 0 M Clamping unit Attached 0 O Cylinder/valve combination Single solenoid valve, fitted on right, piston rod retracted when unactuated Single solenoid valve, fitted on right, piston rod advanced when unactuated Double solenoid valve, fitted on right Single solenoid valve, fitted on left, piston rod retracted when unactuated Single solenoid valve, fitted on left, piston rod advanced when unactuated Double solenoid valve, fitted on left

(M16)

Condi­ tions

Code

3

-…K2

4

-K3

M27

– – – – – –

Enter code

-…K5 -K7

5 6 6 6 6 6 6

3

K2

Not with K3

5

KP

Without S2: position of the clamping unit at the bearing cap

4

K3

With K5: on request

6

V…

Min. stroke: 100 mm

-…K8 -KP -V1 -V2 -V3 -V4 -V5 -V6

-KP

Not with K7

Transfer order code –

–

2017/10 – Subject to change

–

–

–

– KP

è Internet: www.festo.com/catalog/...

–

31

Standard cylinders DNC-KP, standard hole pattern, with clamping unit Ordering data Wearing parts kits Part No. Piston  32 40 50 63 80 100 125

32

Type

Basic version 369195 DNC-32-…-PPV-(A) 369196 DNC-40-…-PPV-(A) 369197 DNC-50-…-PPV-(A) 369198 DNC-63-…-PPV-(A) 369199 DNC-80-…-PPV-(A) 369200 DNC-100-…-PPV-(A) 369201 DNC-125-…-PPV-(A)

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC-EL, standard hole pattern, with end-position locking Technical data

-W-

Function DNC-…-A-…-EL With position sensing

www.festo.com Wearing parts kits è page 24

-N-T-

Diameter 32 … 100 mm

-H-

Stroke length 10 … 2000 mm

Additional measures are required for use in safety-related applications; in Europe, for example, the standards listed under the EC Machinery Directive must be observed. Without

General technical data Piston  Pneumatic connection Piston rod thread Max. axial backlash with end position locked Constructional design

End-position locking

[mm]

ELB ELV ELH

Cushioning Cushioning length PPV [mm] Position sensing Type of mounting

Note

EL

Mounting position

additional measures in accordance with statutory minimum require­ ments, the product is not suitable for use in safety-related sections of control systems.

32

40

50

63

80

100

G1/8 M10x1.25  1.3

G1/4 M12x1.25

G1/4 M16x1.5

G3/8 M16x1.5

G3/8 M20x1.5  2.1

G1/2 M20x1.5

22 10.8

32 9.8

32 11.8

Piston Piston rod Profile barrel At both ends At front At rear Flexible cushioning rings/pads at both ends Pneumatic cushioning, adjustable at both ends 20 20 22 8.2 8.3 7.3 Via proximity sensor Via female thread Via accessories Any

-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1

-H-

Note

 End-position locking should only be operated in conjunction with double-acting cylinders with exhaust air flow control in order to ensure that the lock is always com­ pletely released prior to starting the drive movement.

2017/10 – Subject to change

 No screws with a head or similar may be used in place of endposition locking, as there is a risk that the function will be impaired if they are screwed in too deeply.  The exhaust hole must not be closed.

 Locking can be performed from any stroke position once the drive is brought mechanically into its end position.  End-position locking has been designed to prevent the load dropping in case of pressure failure.

è Internet: www.festo.com/catalog/...

 An excessive end-position cushion­ ing setting (more than 50% closed) can result in the locking bolt not engaging reliably, resulting in premature wear.

33

Standard cylinders DNC-EL, standard hole pattern, with end-position locking Technical data Operating and environmental conditions Piston  32 Operating medium Note on operating/pilot medium Operating pressure [bar] Ambient temperature1) [°C] Corrosion resistance class CRC2) Certification 1) 2)

40

50

63

80

100

Compressed air in accordance with ISO 8573­1:2010 [7:4:4] Operation with lubricated medium possible (in which case lubricated operation will always be required) 2.5 … 12 1.5 … 12 –20 … +80 2 Germanischer Lloyd

Note operating range of proximity sensors Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications.

Impact energy [J] Piston 

32

40

50

63

80

100

Max. impact energy at the end positions 0.1

0.2

0.2

0.5

0.9

1.2

Permissible impact velocity:

Maximum permissible load:

vperm. +

mload +

Ǹ

2xE perm. mdead ) mload

vperm. Eperm. mIntrinsic mLoad

Permissible impact velocity Max. impact energy Moving load (drive) Moving effective load

2xEperm.  *mdead v2

-H-

Note

This data represents the maximum values that can be achieved. The maximum permissible impact energy must be observed.

Forces [N] Piston 

32

40

50

63

80

100

Theoretical force at 6 bar, advancing Theoretical force at 6 bar, retracting Static holding force

483 415 500

754 633

1178 990 2000

1870 1682

3016 2721 5000

4712 4418

Sizing example

-H-

Note

When sizing pneumatic cylinders it is recommended as a basic principle that only 50% of the indicated theoretical forces (see above) be used.

34

Given: Installation position = Vertical Workpiece load = 44 kg F = m x g = 44 kg x 9.81 m/s2 = 431.6 N To be calculated: Suitable piston 

è Internet: www.festo.com/catalog/...

Example with 32 mm piston j: Theoretical force at 6 bar, advancing = 483 N 50% of the theoretical force = 241.5 N Static holding force with 32 mm piston  = 500 N The static holding force of end-position locking is within the permissible range (max. 500 N) with a workpiece load of 44 kg (431.6 N), however the cylinder would be at 89% capacity. Result: A cylinder with a piston  of 40 mm is therefore recommended for this application.

Subject to change – 2017/10

Standard cylinders DNC-EL, standard hole pattern, with end-position locking Technical data Max. lateral force Fq as a function of stroke length l

Fq

   

32 40 50/63 80/100

Weight [g] Piston 

32

40

50

63

80

100

Basic version Product weight with 0 mm stroke Additional weight per 10 mm stroke

537 30

820 45

1320 64

1769 73

2970 106

4833 115

S2 – Through piston rod Product weight with 0 mm stroke Additional weight per 10 mm stroke

596 39

915 61

1450 89

1977 98

3294 144

5477 153

1

3

Materials Sectional view 2

2

Standard cylinder 1 2 3 –

Profile barrel Bearing and end caps Piston rod Seals Note on materials

2017/10 – Subject to change

Wrought aluminium alloy, smooth anodised Die-cast aluminium High-alloy steel Polyurethane, nitrile rubber RoHS compliant è Internet: www.festo.com/catalog/...

35

Standard cylinders DNC-EL, standard hole pattern, with end-position locking Technical data Download CAD data è www.festo.com

Dimensions – Basic version

1 Socket head screw with female thread for mounting attachments

2 Regulating screw for adjustable end-position cushioning

3 Slot for proximity sensor

+

= plus stroke length

Download CAD data è www.festo.com

Dimensions – Variants S2 – Through piston rod

+ = plus stroke length ++ = plus 2x stroke length 

AM

B  d11

BG

D1  f8

D2

E

EE

G

H1

H2

J1

J2

J3

32 40 50 63 80 100

22 24 32 32 40 40

30 35 40 45 45 55

16 16 17 17 17 17

13 13 20 20 30 30

M3 M3 M5 M5 M5 M5

45 54 64 75 93 110

G1/8 G1/4 G1/4 G3/8 G3/8 G1/2

25.1 29.6 29.6 35.6 35.9 38.8

57.5 64 78.5 84.5 104.5 113.5

70 74 93 93 116 116

22.5 27 32 37.5 46.5 55

6 8 10.4 12.4 12.5 12

5.2 6 8.5 10 8 10



L2

L3

L4

L7

MM 

PL

RT

TG

VA

VD

WH

ZM

ZJ

ß1

ß2

ß3

94 105 106 121 128 138

13.8 16.6 17.1 16.6 19.9 22.8

12 16.6 17.1 16.6 19.9 22.8

3.3 3.6 5.1 6.6 10.5 8

12 16 20 20 25 25

15.6 14 14 17 16.4 18.8

M6 M6 M8 M8 M10 M10

32.5 38 46.5 56.5 72 89

4 4 4 4 4 4

10 10.5 11.5 15 15.7 19.2

26 30 37 37 46 51

148 167 183 199 222 240

120 135 143 158 174 189

10 13 17 17 22 22

16 18 24 24 30 30

6 6 8 8 6 6

[mm]

KK

L1

M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5

18 21.5 28 28.5 34.7 38.2

1

[mm] 32 40 50 63 80 100

±2

-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1

36

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC-EL, standard hole pattern, with end-position locking Technical data Download CAD data è www.festo.com

Dimensions – Variants K2 – Extended male piston rod thread

K3 – Female piston rod thread

K5 – Special piston rod thread

K8 – Extended piston rod

-H-

Note

In combination with variant S2, the piston rod is extended at one end.



A1 max.

A2 max.

AF

35 35 70 70 70 70

500 500 500 500 500 500

12 12 16 16 20 20

AM

KF

KK Basic thread

Special thread1)

M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5

M10 M12 M16 M16 M20 M20

[mm] 32 40 50 63 80 100 1)

22 24 32 32 40 40

M6 M8 M10 M10 M12 M12

T4

WH

ß1

2.6 3.3 4.7 4.7 6.1 6.1

26 30 37 37 46 51

10 13 17 17 22 22

The special threads are only available as male threads. The mounting nut on the piston rod thread is included in the scope of delivery

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

37

Standard cylinders DNC-EL, standard hole pattern, with end-position locking Ordering data – Modular products Ordering table Size

32

40

50

63

80

100

0 M Module No.

163 302

163 334

163 366

163 398

163 430

163 462

Function Piston  Stroke Cushioning 0 O Position sensing ê Type of piston rod 1

S2

Condi­ tions

Standard cylinder, double-acting, standard hole pattern, with end-position locking [mm] 32 40 50 63 80 100 [mm] 10 … 2000 Flexible cushioning rings/pads at both ends Pneumatic cushioning, adjustable at both ends Via proximity sensor Through piston rod

Code

Enter code

DNC -… -… -P -PPV

DNC

-A -S2

1

In combination with K2: extended thread at both ends In combination with K3: female thread at both ends In combination with K5: special thread at both ends

Transfer order code DNC

38

–

–

è Internet: www.festo.com/catalog/...

–

–

–

Subject to change – 2017/10

Standard cylinders DNC-EL, standard hole pattern, with end-position locking Ordering data – Modular products Ordering table Size

32

ê Extended male thread 0 O Female thread Special thread Extended piston rod

40

50

Piston rod with extended male thread [mm] 1 … 35 1 … 70 Piston rod with female thread (M6) (M8) (M10) Piston rod with special thread M10 M12 M16 Extended piston rod [mm] 1 … 500

0 M End-position locking

2 K2

Not with K3

3 K3

With K5: on request

63

80

100

(M10)

(M12)

(M12)

M16

M20

M20

Condi­ tions

Code

2

-…K2

3

-K3

Enter code

-…K5 -…K8 4 4 4

At both ends At front At rear

-ELB -ELV -ELH

4 ELB, ELV, ELH In combination with K8 and S2: on request only

Transfer order code –

2017/10 – Subject to change

–

–

–

è Internet: www.festo.com/catalog/...

–

39

Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination Technical data Function DNC-… Without position sensing

-N-T-W-

DNC-…-A-… With position sensing

Diameter 32 … 100 mm Stroke length 100 … 2000 mm

www.festo.com Wearing parts kits è page 32

Valve variants Single solenoid valve unactuated, piston rod retracted

Double solenoid valve unactuated, piston rod retracted

DNC-…-V1 fitted on right

DNC-…-V3 fitted on right

DNC-…-V4 fitted on left

DNC-…-V6 fitted on left

Single solenoid valve unactuated, piston rod advanced

-H-

Note

As viewed from the front of the cylinder (piston rod end) with valve fitted on left or right.

In this example, the valve is fitted on the right.

DNC-…-V2 fitted on right

DNC-…-V5 fitted on left

40

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination Technical data General technical data Piston 

32

Cylinder Pneumatic connection Piston rod thread K3 K5 Constructional design

Cushioning Cushioning length PPV Position sensing Type of mounting

[mm]

Mounting position Valve Valve used

single solenoid double solenoid

Pneumatic connection Constructional design Type of mounting Operating voltage [V DC] Power consumption [W] Duty cycle Protection class with plug socket

40

50

G1/8 G1/4 G1/4 M10x1.25 M12x1.25 M16x1.5 M6 M8 M10 M10 M12 M16 Piston Piston rod Profile barrel Flexible cushioning rings/pads at both ends Pneumatic cushioning, adjustable at both ends 20 20 22 Via proximity sensor Via female thread Via accessories Any

63

80

100

G3/8 M16x1.5 M10 M16

G3/8 M20x1.5 M12 M20

G1/2 M20x1.5 M12 M20

22

32

32

Ordering data – Valves and accessories è page 48 CPE24-M1H-5L-3/8

CPE14-M1BH-5L-1/8

CPE18-M1H-5L-1/4

CPE14-M1BH-5J-1/8

CPE18-M1H-5J-1/4

CPE24-M1H-5J-3/8

G1/8 Piston spool valve Via mounting kit 24 +10/–15% 1 100% IP65

G1/4

G3/8

1.5

-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1

Operating and environmental conditions Piston  32 Operating medium Note on operating/pilot medium Operating pressure [bar] Ambient temperature1) [°C] Corrosion resistance class CRC2) Certification 1) 2)

40

50

63

80

100

Compressed air in accordance with ISO 8573­1:2010 [7:4:4] Operation with lubricated medium possible (in which case lubricated operation will always be required) 3…8 2.5 … 10 0 … +50 2 Germanischer Lloyd

Note operating range of proximity sensors Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications.

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

41

Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination Technical data Force [N] and impact energy [J] Piston  Theoretical force at 6 bar, advancing Theoretical force at 6 bar, retracting Max. impact energy at the end positions1) 1)

S2/S20 S2/S20

32

40

50

63

80

100

483 415 415 415 0.1

754 633 633 633 0.2

1178 990 990 990 0.2

1870 1682 1682 1682 0.5

3016 2721 2721 2721 0.9

4712 4418 4418 4418 1.2

The permissible impact energy is reduced by approx. 10% for variants K10 and S20

Permissible impact velocity:

Maximum permissible load:

vperm. +

mload +

Ǹ

2xE perm. mdead ) mload

vperm. Eperm. mIntrinsic mLoad

Permissible impact velocity Max. impact energy Moving load (drive) Moving effective load

2xEperm.  *mdead v2

-H-

Note

This data represents the maximum values that can be achieved. The maximum permissible impact energy must be observed.

Max. lateral force Fq as a function of stroke length l

Fq

   

42

è Internet: www.festo.com/catalog/...

32 40 50/63 80/100

Subject to change – 2017/10

Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination Technical data Materials Sectional view 2

1

2

3

4

Standard cylinder

Basic version

1 2 3

Profile barrel Bearing and end caps Piston rod

Wrought aluminium alloy, smooth anodised Die-cast aluminium High-alloy steel Tempered steel

High-alloy steel

–

Seals, cylinder

Polyurethane, nitrile rubber

Fluoro rubber

4 –

Housing, valve Seals, valve Note on materials

Die-cast aluminium, polyamide, steel Nitrile rubber RoHS compliant

2017/10 – Subject to change

R8

S10

S11

è Internet: www.festo.com/catalog/...

K10

Wrought aluminium alloy, anodised Polyurethane, nitrile rubber

43

Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination Technical data Download CAD data è www.festo.com

Dimensions

1 Connecting cable not included in scope of delivery

44

+1/2 = plus half stroke length

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination Technical data 

B1

B2

E1

H1

H2

L1 max.

L2

62 71 85 96 123 140

59 68 82 93 119 136

G1/8 G1/8 G1/4 G1/4 G3/8 G3/8

109 +5.5 114+5.5 131+5.5 142+5.5 194+5.5 213+2

86+5.5 94+5.5 104+5.5 115+5.5 133+5.5 158+2

152 152 215 215 242 242

22 23 24 25 28 30

[mm]

L3

L4

L5

ß1

ß2

102 102 138 138 165 165

118 118 163 163 165 165

13 13 25 25 25 25

13 17 17 19 19 27

14 14 14 14 17 17

±3

32 40 50 63 80 100

-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1

-H-

Note

Additional dimensions relating to the basic version and its variants are provided on è page 15, with clamping unit on è page 28.

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

45

Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination Ordering data – Modular products Ordering table Size

32

40

50

63

80

100

0 M Module No.

163302

163334

163366

163398

163430

163462

Function Piston  Stroke Cushioning

Standard cylinder, double-acting, standard hole pattern, cylinder/valve combination [mm] 32 40 50 63 80 100 [mm] 100 … 2000 Flexible cushioning rings/pads at both ends Pneumatic cushioning, adjustable at both ends

0 O Position sensing Protection against rotation Type of piston rod

1

Q

Condi­ tions

Via proximity sensor Square piston rod Through piston rod Through, hollow piston rod

1 2 3 2

Max. stroke: 100 … 1500 mm

S2

Code

Enter code

DNC -… -… -P -PPV

DNC

-A -Q -S2 -S20

In combination with K2: extended thread at both ends

In combination with S2: square piston rod at bearing cap end only

In combination with K3: female thread at both ends

In combination with KP: only supplied with S2

In combination with K5: special thread at both ends

Not with S20, K7, K10, S10, S11

In combination with K8: piston rod extended at bearing cap end only In combination with KP: clamping unit at end cap Not with S20, K7, S10, S11 3

S20 Max. stroke: 850 mm Not with K2, K3, K5, K8, K10, KP, S10, S11

Transfer order code DNC

46

–

–

–

è Internet: www.festo.com/catalog/...

–

–

–

Subject to change – 2017/10

Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination Ordering data – Modular products Ordering table Size

32

40

50

63

80

100

ê Extended male thread 0 O Female thread

Piston rod with extended male thread [mm] 1 … 35 1 … 70 Piston rod with female thread (M6) (M8) (M10) (M10) Special thread Piston rod with special thread M10 M12 M16 M16 Special spanner flats Piston rod with external hexagon Extended piston rod Extended piston rod [mm] 1 … 500 Improved running performance Smooth anodised aluminium coated piston rod Clamping unit Attached Slow speed (constant motion) Slow speed (constant motion at low piston speeds) Running characteristics Low friction

0 M Cylinder/valve combination

4

K2

Not with K3, K10

5

K3

With K5: on request

K5

Not with K10

7

K7

Not with Q, S2, K10

Code

4

-…K2

(M12)

(M12)

5

-K3

M20

M20

6 7

-…K5 -K7

8 9 aJ aA

-…K8 -K10 -KP -S10 -S11

Single solenoid valve, fitted on right, piston rod retracted when unactuated Single solenoid valve, fitted on right, piston rod advanced when unactuated Double solenoid valve, fitted on right Single solenoid valve, fitted on left, piston rod retracted when unactuated Single solenoid valve, fitted on left, piston rod advanced when unactuated Double solenoid valve, fitted on left

Enter code

-V1 -V2 -V3 -V4 -V5 -V6

8

K10 Max. stroke: 1000 mm

9

KP

aJ

S10 Max. stroke: 500 mm; additional strokes on request

aA

S11 Max. stroke: 500 mm; additional strokes on request

Not with KP

Not with K7 6

Condi­ tions

Without S2: position of the clamping unit at the bearing cap Not with S10, S11 Not with S11

–

Transfer order code –

2017/10 – Subject to change

–

–

–

–

–

–

è Internet: www.festo.com/catalog/...

–

–

47

Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination Accessories Technical data è Internet: cpe

Ordering data – Valves For  [mm]

Pneumatic connection

Protection class

Part No.

Type

32 40 50 63 80 100

G1/8

IP65

196941

CPE14-M1BH-5L-1/8

G1/4

IP65

163142

CPE18-M1H-5L-1/4

G3/8

IP65

163166

CPE24-M1H-5L-3/8

32 40 50 63 80 100

G1/8

IP65

196939

CPE14-M1BH-5J-1/8

G1/4

IP65

163143

CPE18-M1H-5J-1/4

G3/8

IP65

163167

CPE24-M1H-5J-3/8

For valve

Part No.

Type

CPE14 CPE18 CPE24

153015 153018 153020

QS-1/8-8-I QS-1/4-10-I QS-3/8-12-I

Single solenoid

Double solenoid

Ordering data – Valve accessories Push-in fitting QS

PU1) Technical data è Internet: qs 10 10 10

CPE14

Cable length: 2.5 m Cable length: 5 m

Technical data è Internet: nebv 8047679 NEBV-Z4WA2L-R-E-2.5-N-LE2-S1 1 8047680 NEBV-Z4WA2L-R-E-5-N-LE2-S1

CPE18 CPE24

Cable length: 2.5 m Cable length: 5 m Cable length: 10 m

151688 151689 193457

KMEB-1-24-2,5-LED KMEB-1-24-5-LED KMEB-1-24-10-LED

1

185705

ZVB-8-14/18

–

187388

ZVB-8-24

–

Connecting cable NEBV/KMEB

Mounting kit ZVB CPE14 CPE18 CPE24

1)

48

Packaging unit quantity

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Accessories Multi-position kit DPNC Material: Flange: Wrought aluminium alloy Threaded studs, hex nuts: Galvanised steel Free of copper and PTFE RoHS-compliant + Dimensions and ordering data For  F1 [mm]

-H-

Note

The maximum overall stroke length must not be exceeded when com­ bining cylinders and multi-position kits.

32 40 50 63 80 100 125

27 27 32 28 38 38 48

= plus stroke length

ZJ

Basic version

KP

Max. overall stroke length [mm]

120 135 143 158 174 189 225

165 188 210 234 269 287 350

1000 1000 1000 1000 1000 1000 1000

Weight

292 410 335 390 847 1200 2102

Part No.

Type

174418 174419 174420 174421 174422 174423 174424

DPNC-32 DPNC-40 DPNC-50 DPNC-63 DPNC-80 DPNC-100 DPNC-125

[g]

Connecting two cylinders with identical piston diameter as a 3 or 4-position cylinder A 3 or 4-position cylinder consists of two separate cylinders whose piston rods advance in opposing directions. To achieve 3 positions

This means that depending on actua­ tion and stroke division, this type of cylinder can assume up to four

positions. In each case the cylinder is driven precisely against a stop. Note that when one end of the piston rod is

fixed, the cylinder barrel executes the movement. The cylinder’s connections must be flexible.

To achieve 4 positions

Two cylinders with identical stroke length must be connected together.

Two cylinders with different stroke lengths must be connected together.

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

49

Standard cylinders DNC, ISO 15552 Accessories Foot mounting HNC/CRHNC Material: HNC: Galvanised steel CRHNC: High-alloy steel Free of copper and PTFE

+ Dimensions and ordering data For  AB AH  [mm] 32 40 50 63 80 100 125

AT

TR

Basic version

KP

142 161 170 185 210 220 250

187 214 237 261 305 318 375

XA KP

144 163 175 190 215 230 270

189 216 242 266 310 328 395

Type

Type

[mm]

High corrosion protection CRC1) Weight Part No. [g]

32 40 50 63 80 100 125

2 2 2 2 2 2 2

174369 174370 174371 174372 174373 174374 174375

HNC-32 HNC-40 HNC-50 HNC-63 HNC-80 HNC-100 HNC-125

4 4 4 4 4 4 4

CRHNC-32 CRHNC-40 CRHNC-50 CRHNC-63 CRHNC-80 CRHNC-100 CRHNC-125

139 188 341 424 809 990 1920

45 54 64 75 93 110 131

176937 176938 176939 176940 176941 176942 176943

XS

Basic version

Part No.

50

32 36 45 50 63 75 90

US

Basic version CRC1) Weight [g]

1)

24 28 32 32 41 41 45

SA

6.5 9 9.5 12.5 15 17.5 22

144 193 353 436 829 1009 1902

4 4 5 5 6 6 8

AU

32 36 45 50 63 71 90

For 

7 10 10 10 12 14.5 16.5

AO

= plus stroke length

45 53 62 63 81 86 102

Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications. Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor­ ted by special tests (è also FN 940082) using appropriate media.

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Accessories Flange mounting FNC/CRFNG

+

= plus stroke length

Material: FNC: Galvanised steel CRFNG: High-alloy steel Free of copper and PTFE RoHS-compliant Cannot be used on the bearing cap in combination with the bellows kit DADB

Dimensions and ordering data For  E [mm] 32 40 50 63 80 100 125 For 

45 54 65 75 93 110 132

FB  H13

MF

7 9 9 9 12 14 16

10 10 12 12 16 16 20

R

32 36 45 50 63 75 90

TF

UF

64 72 90 100 126 150 180

80 90 110 120 150 175 210

W

ZF DNC-…

DNC-…-KP

130 145 155 170 190 205 245

175 198 222 246 285 303 370

16 20 25 25 30 35 45

Part No.

Type

Corrosion resistant CRC1) Weight [g]

Part No.

Type

[mm]

Basic version CRC1) Weight [g]

32 40 50 63 80 100 125

1 1 1 1 1 1 1

174376 174377 174378 174379 174380 174381 174382

FNC-32 FNC-40 FNC-50 FNC-63 FNC-80 FNC-100 FNC-125

4 4 4 4 4 4 4

161846 161847 161848 161849 161850 161851 185363

CRFNG-32 CRFNG-40 CRFNG-50 CRFNG-63 CRFNG-80 CRFNG-100 CRFNG-125

1)

221 291 536 679 1495 2041 3775

220 291 526 680 1508 2054 3787

Corrosion resistance class CRC 1 to Festo standard FN 940070 Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor­ ted by special tests (è also FN 940082) using appropriate media.

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

51

Standard cylinders DNC, ISO 15552 Accessories Trunnion flange ZNCF/CRZNG Material: ZNCF: Special steel casting CRZNG: Electrolytically polished special steel casting Free of copper and PTFE RoHS-compliant Cannot be used on the bearing cap in combination with the bellows kit DADB

+

Dimensions and ordering data For  C2 C3 [mm] 32 40 50 63 80 100 125 For 

71 87 99 116 136 164 192

86 105 117 136 156 189 217

= plus stroke length

TD  e9

TK

TL

TM

US

XH

12 16 16 20 20 25 25

16 20 24 24 28 38 50

12 16 16 20 20 25 25

50 63 75 90 110 132 160

45 54 64 75 93 110 131

18 20 25 25 32 32 40

Part No.

Type

Corrosion resistant CRC1) Weight [g]

Part No.

Type

[mm]

Basic version CRC1) Weight [g]

32 40 50 63 80 100 125

2 2 2 2 2 2 2

174411 174412 174413 174414 174415 174416 174417

ZNCF-32 ZNCF-40 ZNCF-50 ZNCF-63 ZNCF-80 ZNCF-100 ZNCF-125

4 4 4 4 4 4 4

161852 161853 161854 161855 161856 161857 185362

CRZNG-32 CRZNG-40 CRZNG-50 CRZNG-63 CRZNG-80 CRZNG-100 CRZNG-125

1)

52

150 285 473 687 1296 2254 3484

150 285 473 687 1296 2254 3484

XL DNC-…

DNC-…-KP

128 145 155 170 188 208 250

173 198 222 246 283 306 375

Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications. Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor­ ted by special tests (è also FN 940082) using appropriate media.

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Accessories Trunnion mounting kit DAMT for basic version DNC The mounting kit can be attached at any position along the profile barrel of a cylinder. Material: Tempered steel Free of copper and PTFE = plus stroke length

+½ = plus half stroke length 1 Max. tightening torque

+ = plus stroke length +½ = plus half stroke length

1 Max. tightening torque

+ for DNC-KP

Dimensions and ordering data For  B1

C2

C3

TD  e9

TL

TM

UW

71 87 99 116 136 164 192

86 105 117 136 156 189 217

12 16 16 20 20 25 25

12 16 16 20 20 25 25

50 63 75 90 110 132 160

65 75 95 105 130 145 175

[mm] 32 40 50 63 80 100 125

30 32 34 41 44 48 50

For 

XJ

XV

Max. tightening torque

[mm]

DNC-…

DNC-…-KP

DNC-…

DNC-…-KP

[Nm]

32 40 50 63 80 100 125

79.9 89.4 96.4 101.9 116.1 126.2 155.3

124.9 142.4 163.4 177.9 211.1 224.2 280.3

73 82.5 90 97.5 110 120 145

118 135.5 157 173.5 205 218 270

4+1 8+1 8+2 18+2 28+2 28+2 40+2

1)

CRC1)

Weight

XG DNC-…

DNC-…-KP

66.1 75.6 83.6 93.1 103.9 113.8 134.7

111.1 128.6 150.6 169.1 198.9 211.8 259.7

Part No.

Type

2213233 2214899 2214909 2214971 163529 163530 163531

DAMT-V1-32-A DAMT-V1-40-A DAMT-V1-50-A DAMT-V1-63-A DAMT-V1-80-A DAMT-V1-100-A DAMT-V7-125-A

[g] 2 2 2 2 2 2 2

213 388 608 911 1494 2095 3013

Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications.

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

53

Standard cylinders DNC, ISO 15552 Accessories Trunnion support LNZG Material: Trunnion support: Anodised aluminium Plain bearing: Polymer Free of copper and PTFE RoHS-compliant

Dimensions and ordering data For  CR DA FK    [mm] D11 H13 ±0.1 32 40, 50 63, 80 100, 125 1)

12 16 20 25

11 15 18 20

FN

15 18 20 25

30 36 40 50

FS

10.5 12 13 16

H1

15 18 20 24.5

HB  H13

KE

6.6 9 11 14

6.8 9 11 13

NH

TH

UL

CRC1)

±0.2 18 21 23 28.5

32 36 42 50

Weight

Part No.

Type

32959 32960 32961 32962

LNZG-32 LNZG-40/50 LNZG-63/80 LNZG-100/125

[g] 46 55 65 75

2 2 2 2

83 129 178 306

Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications.

Trunnion support CRLNZG Material: High-alloy steel Free of copper and PTFE RoHS-compliant

Dimensions and ordering data For  CR FK   [mm] D11 ±0.1 32 40, 50 63, 80 100, 125 1)

54

12 16 20 25

15 18 20 25

FN

FS

H1

HB  H13

NH

30 36 40 50

10.5 12 13 16

15 18 20 24.5

6.6 9 11 14

18 21 23 28.5

TH

UL

CRC1)

46 55 65 75

4 4 4 4

±0.2 32 36 42 50

Weight

Part No.

Type

161874 161875 161876 161877

CRLNZG-32 CRLNZG-40/50 CRLNZG-63/80 CRLNZG-100

[g] 205 323 435 739

Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor­ ted by special tests (è also FN 940082) using appropriate media.

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Accessories Swivel flange SNC Material: Die-cast aluminium Free of copper and PTFE RoHS-compliant

+ = plus stroke length 1 The pivot pin is protected against rotation with a dowel pin. Dimensions and ordering data For  CG

CP

[mm]

H14

h14

32 40 50 63 80 100 125

14 16 21 21 25 25 37

34 40 45 51 65 75 97

For 

1)

45 +0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.8 110+0.3/–0.8 131–0.8

TG

[mm] 32 40 50 63 80 100 125

E

32.5 38 46.5 56.5 72 89 110

EK  H9

FL ±0.2

10 12 16 16 20 20 30

22 25 27 32 36 41 50 CRC1)

XC DNC-…

DNC-…-KP

142 160 170 190 210 230 275

187 213 237 266 305 328 400

Weight

L

SR

13 16 16 21 22 27 30

10 12 12 16 16 20 25

Part No.

Type

174383 174384 174385 174386 174387 174388 174389

SNC-32 SNC-40 SNC-50 SNC-63 SNC-80 SNC-100 SNC-125

[g] 2 2 2 2 2 2 2

93 140 234 331 618 865 1728

Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications.

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

55

Standard cylinders DNC, ISO 15552 Accessories Swivel flange SNCB/SNCB-…-R3 Material: SNCB: Die-cast aluminium SNCB-…-R3: Die-cast aluminium with protective coating Free of copper and PTFE RoHS-compliant + Dimensions and ordering data For  CB [mm]

H14

H9/e8

EK  e8

32 40 50 63 80 100 125

26 28 32 40 50 60 70

45 +0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.8 110 +0.3/–0.8 131–0.8

10 12 12 16 16 20 25

For 

E

FL ±0.2 22 25 27 32 36 41 50

= plus stroke length

L

MR

13 16 16 21 22 27 30

TG

8.5 12 12 16 16 20 25

UB

32.5 38 46.5 56.5 72 89 110

XC

h14

DNC-…

DNC-…-KP

45 52 60 70 90 110 130

142 160 170 190 210 230 275

187 213 237 266 305 328 400

Part No.

Type

R3 – High corrosion protection CRC1) Weight Part No. [g]

Type

[mm]

Basic version CRC1) Weight [g]

32 40 50 63 80 100 125

2 2 2 2 2 2 2

174390 174391 174392 174393 174394 174395 174396

SNCB-32 SNCB-40 SNCB-50 SNCB-63 SNCB-80 SNCB-100 SNCB-125

3 3 3 3 3 3 3

SNCB-32-R3 SNCB-40-R3 SNCB-50-R3 SNCB-63-R3 SNCB-80-R3 SNCB-100-R3 SNCB-125-R3

1)

56

103 155 232 375 636 1035 1860

100 151 228 371 632 986 1776

176944 176945 176946 176947 176948 176949 176950

Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications. Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Accessories Swivel flange SNCS/CRSNCS/SNCS-…-R3 Material: SNCS 32 … 80: Die-cast aluminium SNCS 100 … 125: Wrought aluminium alloy CRSNCS 32 … 80: High-alloy stainless steel SNCS-…-R3 100 … 125: Wrought alu­ minium alloy with protective coating RoHS-compliant

+

Dimensions and ordering data For  CN  [mm] DNC-… DNC-…-R3 32 40 50 63 80 100 125

10 12+0.015 16+0.015 16+0.015 20+0.018 20+0.018 30+0.018 +0.013

For 

10+0.015/–0.04 12+0.018/–0.04 16+0.018/–0.04 16+0.018/–0.04 20+0.021/–0.04 20+0.021/–0.04 30+0.021/–0.04

E DNC-…-R3

±0.2

45 +0.2/–0.5 54–0.5 64–0.6 74,5±0.5 92,2±0.8 109+1/–0.7 132+1/–0.7

45–0.5 54–0.5 64–0.6 74,5±0.5 92,2±0.8 109 +1/–0.7 132+1/–0.7

10.5 12 15 15 18 18 25

RA

EX

FL

DNC-…-R3

DNC-… +1

DNC-…-R3 +1

15 +0.5 17+0.5 20+0.5 23–0.5 28–0.5 30±0.5 39±0.5

15 +0.5 17+0.5 20+0.5 22+0.5 27+0.5 30±0.5 39±0.5

14.5 17.5 18.5 23 25 95 100

14.5 17.5 19 23 25 100 100

LT

±0.2 14 16 21 21 25 25 37

22 25 27 32 36 41 50

TG

DNC-… [mm]

For 

EP

DNC-…

MS

32 40 50 63 80 100 125

= plus stroke length

13 16 16 21 22 27 30 XC

DNC-…

DNC-…-KP

142 160 170 190 210 230 275

187 213 237 266 305 328 400

32.5 38 46.5 56.5 72 89 110

Part No.

Type

High corrosion protection CRC1) Weight [g]

Part No.

Type

[mm]

Basic version CRC1) Weight [g]

32 40 50 63 80 100 125

2 2 2 2 2 2 2

174397 174398 174399 174400 174401 174402 174403

SNCS-32 SNCS-40 SNCS-50 SNCS-63 SNCS-80 SNCS-100 SNCS-125

4 4 4 4 4 3 3

2895920 2895921 2895922 2895923 2895924 2895925 2895926

CRSNCS-32 CRSNCS-40 CRSNCS-50 CRSNCS-63 CRSNCS-80 SNCS-100-R3 SNCS-125-R3

1)

86 122 216 281 557 683 1369

161 239 403 576 1173 684 1369

Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications. Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment. Corrosion resistance class CRC 4 to Festo standard FN 940070 Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor­ ted by special tests (è also FN 940082) using appropriate media.

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

57

Standard cylinders DNC, ISO 15552 Accessories Swivel flange SNCL Material: Die-cast aluminium Free of copper and PTFE RoHS-compliant

+ Dimensions and ordering data For  CD  [mm] H9 32 40 50 63 80 100 125 For 

10 12 12 16 16 20 25

45 +0.2/–0.5 54–0.5 64–0.6 75–0.6 93–0.8 110 +0.3/–0.8 131–0.8 TG

[mm] 32 40 50 63 80 100 125 1)

58

E

32.5 38 46.5 56.5 72 89 110

= plus stroke length

EW

FL

–0.2/–0.6

±0.2

26 28 32 40 50 60 70

22 25 27 32 36 41 50 CRC1)

XC DNC-…

DNC-…-KP

142 160 170 190 210 230 275

187 213 237 266 305 328 400

L

MR

13 16 16 21 22 27 30

10 12 12 16 16 20 25

Weight

Part No.

Type

174404 174405 174406 174407 174408 174409 174410

SNCL-32 SNCL-40 SNCL-50 SNCL-63 SNCL-80 SNCL-100 SNCL-125

[g] 2 2 2 2 2 2 2

71 95 158 225 436 606 1135

Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications.

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Accessories Ordering data – Mounting attachments Designation For  Part No.

Type

Clevis foot LNG

Designation

For 

Technical data è Internet: clevis foot Part No. Type

32 40 50 63 80 100 125

5561 5562 5563 5564 5565 5566 6987

LSN-32 LSN-40 LSN-50 LSN-63 LSN-80 LSN-100 LSN-125

Clevis foot LSN 32 40 50 63 80 100 125

33890 33891 33892 33893 33894 33895 33896

LNG-32 LNG-40 LNG-50 LNG-63 LNG-80 LNG-100 LNG-125

32 40 50 63 80 100 125

31740 31741 31742 31743 31744 31745 31746

LSNG-32 LSNG-40 LSNG-50 LSNG-63 LSNG-80 LSNG-100 LSNG-125

Clevis foot for welding LSNSG 32 40 50 63 80 100 125

31747 31748 31749 31750 31751 31752 31753

LSNSG-32 LSNSG-40 LSNSG-50 LSNSG-63 LSNSG-80 LSNSG-100 LSNSG-125

32 40 50 63 80 100 125

31761 31762 31763 31764 31765 31766 31767

LBG-32 LBG-40 LBG-50 LBG-63 LBG-80 LBG-100 LBG-125

Right-angle clevis foot LQG 32 40 50 63 80 100 125

31768 31769 31770 31771 31772 31773 31774

LQG-32 LQG-40 LQG-50 LQG-63 LQG-80 LQG-100 LQG-125

Clevis foot LSNG

Clevis foot LBG

Technical data è Internet: crlng Type

Ordering data – Mounting attachments, corrosion-resistant Designation For 

Part No.

Clevis foot CRLNG 32 40 50 63 80 100 125

161840 161841 161842 161843 161844 161845 176951

Ordering – Mounting attachments, high corrosion protection Designation For 

Technical data è Internet: clevis foot Part No. Type

Clevis foot LBG-R3 32 40 50 63 80 100 125

2078790 2078792 2078794 2078795 2078797 2078799 2078837

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

CRLNG-32 CRLNG-40 CRLNG-50 CRLNG-63 CRLNG-80 CRLNG-100 CRLNG-125

LBG-32-R3 LBG-40-R3 LBG-50-R3 LBG-63-R3 LBG-80-R3 LBG-100-R3 LBG-125-R3

59

Standard cylinders DNC, ISO 15552 Accessories Ordering data – Piston rod attachments Designation For  Part No.

Type

Rod eye SGS

Designation

For 

Technical data è Internet: piston rod attachment Part No. Type

Rod clevis SGA 32 40 50 63 80 100 125

9261 9262 9263

SGS-M10x1,25 SGS-M12x1,25 SGS-M16x1,5

9264

SGS-M20x1,5

10774

SGS-M27x2

32 40 50 63 80 100 125

6144 6145 6146

SG-M10x1,25 SG-M12x1,25 SG-M16x1,5

6147

SG-M20x1,5

14987

SG-M27x2-B

32963 32964 32965

KSG-M10x1,25 KSG-M12x1,25 KSG-M16x1,5

32966

KSG-M20x1,5

32967

KSG-M27x2

157333 157334 160256 160257

AD-M10x1,25-x AD-M10x1,25-¼ AD-M12x1,25-¼ AD-M12x1,25-y

Rod clevis SG

Coupling piece KSG 32 40 50 63 80 100 125

32 40 50 63 80 100 125 Self-aligning rod coupler FK 32 40 50 63 80 100 125 Coupling piece KSZ 32 40 50 63 80 100 125

32954 10767 10768

SGA-M10x1,25 SGA-M12x1,25 SGA-M16x1,5

10769

SGA-M20x1,5

10770

SGA-M27x2

6140 6141 6142

FK-M10x1,25 FK-M12x1,25 FK-M16x1,5

6143

FK-M20x1,5

10485

FK-M27x2

36125 36126 36127

KSZ-M10x1,25 KSZ-M12x1,25 KSZ-M16x1,5

36128

KSZ-M20x1,5

–

–

Adapter AD 32 40

Ordering data – Piston rod attachments, corrosion-resistant Designation For  Part No. Type

Designation

Rod eye CRSGS

Rod clevis CRSG 32 40 50 63 80 100 125

Self-aligning rod coupler CRFK 32 40 50 63 80 100

60

195582 195583 195584

CRSGS-M10x1,25 CRSGS-M12x1,25 CRSGS-M16x1,5

195585

CRSGS-M20x1,5

195586

CRSGS-M27x2

2305778 2305779 2490673

CRFK-M10x1,25 CRFK-M12x1,25 CRFK-M16x1,5

2545677

CRFK-M20x1,5

è Internet: www.festo.com/catalog/...

Technical data è Internet: crsg Type

For 

Part No.

32 40 50 63 80 100 125

13569 13570 13571

CRSG-M10x1,25 CRSG-M12x1,25 CRSG-M16x1,5

13572

CRSG-M20x1,5

185361

CRSG-M27x2

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Accessories Bellows kit DADB

General technical data Type DADB-V6-

32

Max. cylinder stroke range1) Type of mounting Mounting position Resistance to media Ambient temperature2) Protection class Corrosion resistance class CRC3) 1) 2) 3)

[mm]

[°C]

40

50

63

10 … 500 10 … 500 10 … 500 10 … 500 Via threaded pin Any Dust, chips, oil, grease, fuel (è Internet: media resistance) –10 … +80 IP54 3

80

100

10 … 500

10 … 500

In combination with the bellows kit DADB Note operating range of proximity sensors and cylinder Corrosion resistance class CRC 3 to Festo standard FN 940070 High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial environment.

Materials Sectional view 5

1

2

3

4

Bellows 1 2 3 4 5 –

Connection Intermediate piece Bellows End piece Connector O-ring Note on materials

Polyamide Polyamide Nitrile rubber Polyamide Polyamide Nitrile rubber Free of copper and PTFE RoHS-compliant

Weight [g] Type DADB-V6Stroke [mm]

32

40

50

63

80

100

10 … 50 51 … 125 126 … 175 176 … 250 251 … 300 301 … 350 351 … 375 376 … 425 426 … 475 476 … 500

29 41 52 66 79 92 92 104 117 117

42 56 68 85 100 115 115 129 144 144

71 91 105 129 147 166 167 185 204 205

69 89 103 127 145 164 165 183 202 203

99 127 140 193 231 268 259 296 334 324

124 152 165 218 255 293 284 321 359 349

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

61

Standard cylinders DNC, ISO 15552 Accessories Travel velocity v as a function of tubing length l The bellows kit is a leak-free system. To prevent unwanted media being drawn in, the supply and exhaust air must be ducted via a pressure compensation hole in the connection

1

Advancing

Note

The push-in fittings opposite must be used for the pressure compensation hole. Silencers can also be used as an alternative. This reduces the travel velocity slightly.

62

and tubing length. The recommended tubing length based on the travel velocity of the drive can be read from the graph.

Returning

 32/50/63  40

-H-

part 1. The pressure generated in the bellows kit by the positioning motion is primarily defined by travel velocity

 80/100

 32  40

 50/63  80/100

Tubing size and push-in fitting for pressure compensation hole  Tubing O.D. Push-in fitting [mm] [mm] Part No. Type 32, 40

8

50, 63, 80, 100

12

è Internet: www.festo.com/catalog/...

186109 578376 578362 186350 578344 578366

QS-Gx-8-I NPQH-DK-G18-Q8-P10 QS-F-Gx-8H QS-G¼-12 NPQH-D-G14-Q12-P10 NPQH-D-G14-S12-P10

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Accessories Download CAD data è www.festo.com

Dimensions

+  Stroke [mm]

A21)

10 … 50 51 … 125 126 … 175 176 … 250 251 … 300 301 … 350 351 … 375 376 … 425 426 … 475 476 … 500

29 47 61 80 96 112 114 130 145 147

 Stroke [mm]

A21)

10 … 50 51 … 125 126 … 175 176 … 250 251 … 300 301 … 350 351 … 375 376 … 425 426 … 475 476 … 500

28 46 56 73 86 97 105 116 126 134

 Stroke [mm]

A21)

10 … 50 51 … 125 126 … 175 176 … 250 251 … 300 301 … 350 351 … 375 376 … 425 426 … 475 476 … 500

25 37 49 62 74 86 87 98 110 111

1)

D1 max.

D2

32 EE

L1

L2

WH+A2

A21) 28 43 56 72 86 100 101 115 130 131

38

14

Gx

12.9

5.4

55 73 87 106 122 138 140 156 171 173

D1 max.

D2

50 EE

L1

L2

WH+A2

A21) 28 46 56 73 86 97 105 116 126 134

57

17

G¼

22.35

7

65 83 93 110 123 134 142 153 163 171

D1 max.

D2

80 EE

L1

L2

WH+A2

A21)

4

71 83 95 108 120 132 133 144 156 157

25 37 49 62 74 86 87 98 110 111

93

17

G¼

28

D1 max.

D2

40 EE

= plus stroke length

L1

L2

WH+A2

46

14

Gx

16.3

5.4

58 73 86 102 116 130 131 145 160 161

D1 max.

D2

63 EE

L1

L2

WH+A2

57

17

G¼

22.4

7

65 83 93 110 123 134 142 153 163 171

D1 max.

D2

100 EE

L1

L2

WH+A2

4

71 83 95 108 120 132 133 144 156 157

93

17

G¼

28

The dimension corresponds to the K8 value (extended piston rod) of the drive

2017/10 – Subject to change

è Internet: www.festo.com/catalog/...

63

Standard cylinders DNC, ISO 15552 Accessories Ordering data – Bellows kit An extended piston rod (order code K8) is absolutely necessary when using a bellows kit. è Ordering data – Modular products.

Cylinder data  Stroke

The necessary dimension for K8 as a function of piston diameter and cylinder stroke as well as the associated bellows kit is indicated in the following table:

Order example: Selected standard cylinder: DNC-32-320-PPV-A-… Dimension for the corresponding K8 value (see table): 112 mm Complete type designation for the standard cylinder: DNC-32-320-PPV-A-…-112K8 Associated bellows kit: DADB-V6-32-S301-350

[mm]

[mm]

Bellows kit Dimension Part No. Type for K8 [mm]

32

10 … 50 51 … 125 126 … 175 176 … 250 251 … 300 301 … 350 351 … 375 376 … 425 426 … 475 476 … 500

29 47 61 80 96 112 114 130 145 147

553271 553273 553275 553277 553279 553281 553283 553285 553287 553289

DADB-V6-32-S10-50 DADB-V6-32-S51-125 DADB-V6-32-S126-175 DADB-V6-32-S176-250 DADB-V6-32-S251-300 DADB-V6-32-S301-350 DADB-V6-32-S351-375 DADB-V6-32-S376-425 DADB-V6-32-S426-475 DADB-V6-32-S476-500

40

10 … 50 51 … 125 126 … 175 176 … 250 251 … 300 301 … 350 351 … 375 376 … 425 426 … 475 476 … 500

28 43 56 72 86 100 101 115 130 131

553291 553293 553295 553297 553399 553301 553303 553305 553307 553309

DADB-V6-40-S10-50 DADB-V6-40-S51-125 DADB-V6-40-S126-175 DADB-V6-40-S176-250 DADB-V6-40-S251-300 DADB-V6-40-S301-350 DADB-V6-40-S351-375 DADB-V6-40-S376-425 DADB-V6-40-S426-475 DADB-V6-40-S476-500

50

10 … 50 51 … 125 126 … 175 176 … 250 251 … 300 301 … 350 351 … 375 376 … 425 426 … 475 476 … 500

28 46 56 73 86 97 105 116 126 134

553311 553313 553315 553317 553319 553321 553323 553325 553327 553329

DADB-V6-50-S10-50 DADB-V6-50-S51-125 DADB-V6-50-S126-175 DADB-V6-50-S176-250 DADB-V6-50-S251-300 DADB-V6-50-S301-350 DADB-V6-50-S351-375 DADB-V6-50-S376-425 DADB-V6-50-S426-475 DADB-V6-50-S476-500

63

10 … 50 51 … 125 126 … 175 176 … 250 251 … 300 301 … 350 351 … 375 376 … 425 426 … 475 476 … 500

28 46 56 73 86 97 105 116 126 134

553331 553333 553335 553337 553339 553341 553343 553345 553347 553349

DADB-V6-63-S10-50 DADB-V6-63-S51-125 DADB-V6-63-S126-175 DADB-V6-63-S176-250 DADB-V6-63-S251-300 DADB-V6-63-S301-350 DADB-V6-63-S351-375 DADB-V6-63-S376-425 DADB-V6-63-S426-475 DADB-V6-63-S476-500

80

10 … 50 51 … 125 126 … 175 176 … 250 251 … 300 301 … 350 351 … 375 376 … 425 426 … 475 476 … 500

25 37 49 62 74 86 87 98 110 111

553351 553353 553355 553357 553359 553361 553363 553365 553367 553369

DADB-V6-80-S10-50 DADB-V6-80-S51-125 DADB-V6-80-S126-175 DADB-V6-80-S176-250 DADB-V6-80-S251-300 DADB-V6-80-S301-350 DADB-V6-80-S351-375 DADB-V6-80-S376-425 DADB-V6-80-S426-475 DADB-V6-80-S476-500

100

10 … 50 51 … 125 126 … 175 176 … 250 251 … 300 301 … 350 351 … 375 376 … 425 426 … 475 476 … 500

25 37 49 62 74 86 87 98 110 111

553371 553373 553375 553377 553379 553381 553383 553385 553387 553389

DADB-V6-100-S10-50 DADB-V6-100-S51-125 DADB-V6-100-S126-175 DADB-V6-100-S176-250 DADB-V6-100-S251-300 DADB-V6-100-S301-350 DADB-V6-100-S351-375 DADB-V6-100-S376-425 DADB-V6-100-S426-475 DADB-V6-100-S476-500

64

è Internet: www.festo.com/catalog/...

Cylinder data  Stroke [mm]

[mm]

Bellows kit Dimension Part No. Type for K8 [mm]

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Accessories Ordering data – Guide units for fixed strokes (recirculating ball bearing guide only) Stroke Part No. Type [mm]

Stroke [mm]

Part No.

Technical data è Internet: feng Type

For  32 mm 10 … 50 10 … 100 10 … 160 10 … 200 10 … 250 10 … 320 10 … 400 10 … 500

34493 34494 34495 34496 150289 34497 150290 34498

FENG-32-50-KF FENG-32-100-KF FENG-32-160-KF FENG-32-200-KF FENG-32-250-KF FENG-32-320-KF FENG-32-400-KF FENG-32-500-KF

For  40 mm 10 … 50 10 … 100 10 … 160 10 … 200 10 … 250 10 … 320 10 … 400 10 … 500

34499 34500 34501 34502 34503 34504 150291 34505

FENG-40-50-KF FENG-40-100-KF FENG-40-160-KF FENG-40-200-KF FENG-40-250-KF FENG-40-320-KF FENG-40-400-KF FENG-40-500-KF

For  50 mm 10 … 50 10 … 100 10 … 160 10 … 200 10 … 250 10 … 320 10 … 400 10 … 500

34506 34507 34508 34509 34510 34511 150292 34512

FENG-50-50-KF FENG-50-100-KF FENG-50-160-KF FENG-50-200-KF FENG-50-250-KF FENG-50-320-KF FENG-50-400-KF FENG-50-500-KF

For  63 mm 10 … 50 10 … 100 10 … 160 10 … 200 10 … 250 10 … 320 10 … 400 10 … 500

34513 34514 34515 34516 34517 34518 34519 34520

FENG-63-50-KF FENG-63-100-KF FENG-63-160-KF FENG-63-200-KF FENG-63-250-KF FENG-63-320-KF FENG-63-400-KF FENG-63-500-KF

For  80 mm 10 … 50 10 … 100 10 … 160 10 … 200 10 … 250 10 … 320 10 … 400 10 … 500

34521 34522 34523 34524 34525 34526 34527 34528

FENG-80-50-KF FENG-80-100-KF FENG-80-160-KF FENG-80-200-KF FENG-80-250-KF FENG-80-320-KF FENG-80-400-KF FENG-80-500-KF

For  100 mm 10 … 50 10 … 100 10 … 160 10 … 200 10 … 250 10 … 320 10 … 400 10 … 500

34529 34530 34531 34532 34533 34534 34535 34536

FENG-100-50-KF FENG-100-100-KF FENG-100-160-KF FENG-100-200-KF FENG-100-250-KF FENG-100-320-KF FENG-100-400-KF FENG-100-500-KF

Ordering data – Guide units for variable strokes For  Stroke [mm] [mm] 32 40 50 63 80 100

10 … 500 10 … 500 10 … 500 10 … 500 10 … 500 10 … 500

Ordering data – Mounting kits for proximity sensors SMT-8 For  [mm] 32 40 50 63 80 100

2017/10 – Subject to change

With recirculating ball bearing guide Part No. Type

Technical data è Internet: feng With plain-bearing guide Part No. Type

34487 34488 34489 34490 34491 34492

34481 34482 34483 34484 34485 34486

FENG-32-…-GF FENG-40-…-GF FENG-50-…-GF FENG-63-…-GF FENG-80-…-GF FENG-100-…-GF

Part No.

Technical data è Internet: smb Type

175705

SMB-8-FENG-32/40

175706

SMB-8-FENG-50/63

175707

SMB-8-FENG-80/100

FENG-32-…-KF FENG-40-…-KF FENG-50-…-KF FENG-63-…-KF FENG-80-…-KF FENG-100-…-KF

è Internet: www.festo.com/catalog/...

65

Standard cylinders DNC, ISO 15552 Accessories

Electrical connection

Cable length [m]

Part No.

Technical data è Internet: smt Type

Cable, 3-wire Plug M8x1, 3-pin Plug M12x1, 3-pin Cable, 3-wire Plug M8x1, 3-pin

2.5 0.3 0.3 2.5 0.3

574335 574334 574337 574338 574339

SMT-8M-A-PS-24V-E-2,5-OE SMT-8M-A-PS-24V-E-0,3-M8D SMT-8M-A-PS-24V-E-0,3-M12 SMT-8M-A-NS-24V-E-2,5-OE SMT-8M-A-NS-24V-E-0,3-M8D

Cable, 3-wire

7.5

574340

SMT-8M-A-PO-24V-E-7,5-OE

Electrical connection

Cable length [m]

Part No.

Technical data è Internet: sme Type

Cable, 3-wire Cable, 2-wire Plug M8x1, 3-pin Cable, 3-wire Plug M8x1, 3-pin

2.5 5.0 2.5 0.3 2.5 0.3

543862 543863 543872 543861 150855 150857

SME-8M-DS-24V-K-2,5-OE SME-8M-DS-24V-K-5,0-OE SME-8M-ZS-24V-K-2,5-OE SME-8M-DS-24V-K-0,3-M8D SME-8-K-LED-24 SME-8-S-LED-24

Cable, 3-wire

7.5

160251

SME-8-O-K-LED-24

Electrical connection, right

Cable length [m]

Part No.

Technical data è Internet: nebu Type

Straight socket, M8x1, 3-pin

Cable, open end, 3-wire

Straight socket, M12x1, 5-pin

Cable, open end, 3-wire

Angled socket, M8x1, 3-pin

Cable, open end, 3-wire

Angled socket, M12x1, 5-pin

Cable, open end, 3-wire

2.5 5 2.5 5 2.5 5 2.5 5

541333 541334 541363 541364 541338 541341 541367 541370

NEBU-M8G3-K-2.5-LE3 NEBU-M8G3-K-5-LE3 NEBU-M12G5-K-2.5-LE3 NEBU-M12G5-K-5-LE3 NEBU-M8W3-K-2.5-LE3 NEBU-M8W3-K-5-LE3 NEBU-M12W5-K-2.5-LE3 NEBU-M12W5-K-5-LE3

Part No.

Type

151680

ABP-5-S

Ordering data – Proximity sensors for T-slot, magneto-resistive Type of mounting Switch output N/O contact Insertable in the slot from above, flush with cylinder profile, short design

PNP

NPN

N/C contact Insertable in the slot from above, flush with cylinder profile, short design

PNP

Ordering data – Proximity sensors for T-slot, magnetic reed Type of mounting Switching output N/O contact Insertable in the slot from above, flush with the cylinder profile

Contacting

Insertable in the slot lengthwise, flush with the cylinder profile

Contacting

Insertable in the slot lengthwise, flush with the cylinder profile

Contacting

N/C contact

Ordering data – Connecting cables Electrical connection, left

Ordering data – Slot covers for T-slot Assembly Length Insertable from above

66

2x 0.5 m

è Internet: www.festo.com/catalog/...

Subject to change – 2017/10

Standard cylinders DNC, ISO 15552 Accessories Ordering data – One-way flow control valves Connection Thread G1/8

G1/4

G3/8

G1/2

2017/10 – Subject to change

Material

Part No.

Technical data è Internet: grla Type

Metal design

193142 193143 193144 193145 193146 193147 193148 193149 193150 193151 193152

GRLA-1/8-QS-3-D GRLA-1/8-QS-4-D GRLA-1/8-QS-6-D GRLA-1/8-QS-8-D GRLA-1/4-QS-6-D GRLA-1/4-QS-8-D GRLA-1/4-QS-10-D GRLA-3/8-QS-6-D GRLA-3/8-QS-8-D GRLA-3/8-QS-10-D GRLA-1/2-QS-12-D

For tubing O.D. 3 4 6 8 6 8 10 6 8 10 12

è Internet: www.festo.com/catalog/...

67

Festo North America

1 Festo Canada Headquarters Festo Inc. 5300 Explorer Drive 0ississauga, O1 LW 5*

2 Montréal 5600, Trans-Canada Pointe-Claire, QC +95 1%6

3 Québec City 930, rue Watt11 Québec, QC *1; *3

4 Festo United States Headquarters Festo Corporation 395 Moreland Road +auppauge, 1< 11

5 Appleton 1orth 9 Tower 9iew Drive, Suite 1 Greenville, WI 59

7 'etroit 11 West Long Lake Road Troy, MI 09

6 Chicago 5 W Algonquin - Suite 30 Arlington +eights, IL 60005

8 Silicon Valley 935 Southfront Road, Suite F Livermore, CA 9550

Canadian Customers Commercial Support: Tel: 1  *O FESTO 1  3 3 Fax: 1  F; FESTO 1  393 3 Email: festocanada#cafestocom

Technical Support: Tel:1  *O FESTO 1  3 3 Fax:1  F; FESTO1  393 3 Email: technicalsupport#cafestocom

USA Customers Commercial Support: Tel:1 00 99 FESTO 1 00 993 3 Fax:1 00 9 FESTO 1 00 93 3 Email: customerservice#usfestocom

Technical Support: Tel:1  *O FESTO 1  3 3 Fax:100 9 FESTO1 00 93 3 Email: productsupport#usfestocom

SubMect to change

Internet: www.festo.com/us

C

Festo Regional Contact Center