Fox Manual

Fox Manual By Reliable Software Systems Private Limited

www.foxtrader.in

1

© Reliable Software

Fox is a powerful analytical terminal, with rich user interface designed to make market analysis easy for any trader or investor. It has all analytical features of Falcon7. Building and fine tuning trading strategies, scanning groups for any condition becomes very easy with Fox. An upgrade of Fox is FoxTrader which is a next generation internet trading terminal, designed to handle the needs of active traders. It is already offered by Upstox, Finvasia, VNS, Wisdom Capital, PrabhudasLiladhar, BMA Wealth and will be soon available through many more. Market that are supported in this are NSE-CM, NSE-FO, NSE-Cur, BSE, MCX.

FOX

FOXEOD

FOXNET

FOX Leaseline

FOXTrader

Each product of Fox has 2 versions, one is standard and the other is premium. Trader Standard features applies by default to the product and the premium version is available on demand.

Please refer to the pricing structure of each product at the link below.. http://www.reliable.co.in/RW.HomeV1.FoxChargesv2.aspx?Product=fox

Differences between Standard and premium version 100 Days of Historical Intraday data

-

500 days of Historical Intraday data

Tabular Intraday ADS

-

Graphical Intraday ADS

Tabular Sector Wise ADS

-

Graphical Sector Wise ADS

Basic Price Based Alerts and Tick Chart

-

Advance Alerts with Volume Profile

No Market Profile

-

Market Profile available.

www.foxtrader.in

2

© Reliable Software

Basic Level Strategy Analysis

-

Detailed level Strategy Analysis

Tabular Option Chain

-

Graphical Option Chain.

How to install. System Requirements… Particulars

Minimum

Recommended

Operating System

Win 7, Win 8

Win 10

Processor

i3

i5 or above

Free Disk Space

10 GB

25-30 GB

RAM

3 GB

4GB or Higher

Internet Speed

512 KBPS

1 MBPS or higher

Step-by-step Instructions to download “Fox” Step 1: Access www.reliable.co.in on your browser and go to ‘Downloads’ and click on FoxTrader to download “FoxTrader” from respective broker. Download it on your Desktop or by default it goes to “Downloads” folder. If you want to download Fox Leaseline, FoxEOD or FoxNet, click on Fox and download the respective product. Note :- “AntiVirus may prevent this setup from downloading, You can stop “Antivirus” for time being to carry on the Download. Step 2: While downloading “FoxTrader”, you have to fill in few required details and submit them, thereafter FoxTrader Setup will start downloading…. This step is not required if you are downloading FoxLeaseline, FoxEOD or FoxNet

www.foxtrader.in

3

© Reliable Software

Step 3: Open Fox Setup from Downloads folder / Desktop and double click on the setup to install.

Step 4: Click ‘Next’ to Install.

Step 5: Change ‘D:’ to some other drive ( C: / E: / F: ) only if you want to change the installation path. Thereafter just follow self-explanatory steps to finish the installation.

Step 5: On Successful installation, below icon will come on the desktop. Double click on Fox to start the application. Step 6: Fill your details here to send it to the server. Your details will be verified by our security personal and access will be given without you being have to call our Support team.

www.foxtrader.in

4

© Reliable Software

Step 7: Restart the application and double click on Fox to start.

Step 8: Select the exchanges and click on Subscribe to receive important events for scrips that we regularly keep sending from our server in few windows.

www.foxtrader.in

5

© Reliable Software

Now, you are all set to go…. Step 9: This is an alternative step (not mandatory) to download full set (EOD and Intra data) for the exchanges subscribed on your local machine. This helps the application to fetch data from local machine instead fetching from the server. This is one-time process.

www.foxtrader.in

6

© Reliable Software

Great! Let us see few Application Level settings that needs to set first hand before we start using the product. We can access it from first menu “Fox…” -> Settings… 1st Tab  Path

 Feature Level – Premium / Standard This selection will by default come from the subscription. If the product is subscribed for premium features, this box will have premium, else it will have ‘Standard’.  Desktop Saving while closing – Ask / Yes / No This option gives user the choice to save his desktop by default while closing the application. If selected ‘Ask’, then while closing fox, it will prompt the following message to the user. Depending on his choice, the action will be taken.

If ‘Yes’ is selected, then the application will save the desktop by default with a ‘DefaultDesktop’ file and on ‘No’ Selection, nothing will be done.

www.foxtrader.in

7

© Reliable Software

2nd Tab  Masters

3rd Tab  EOD

 Load EOD Data From : By default it contains 01/01/2010, which means that EOD data for the daily charts that user open will have data from 01/01/2010 onwards. If he wants to load more historical data, then he can change the date here. The date can be set from 01/01/1990 onwards.  Adjust RBS It will adjust the rights, bonus and splits on charts as per the ratio declared.  Adjust Dividend User can opt to adjust Dividend too on charts.  Pivot Type – Standard / Camarilla / Fibonacci / Woodies / Demark By default, the pivot type is set to Standard (Classical Formula of Pivot). User can choose to select other than Standard type so that the pivot report displays the respective levels. www.foxtrader.in

8

© Reliable Software

4th Tab  Intra

 Use minute wise previous days data Current days intraday data is always tick data and previous days historical data is compressed by 1 minute due to this settings in place. By default it is like this. So if we are viewing intraday chart of 1 min or above, the data will come out to be proper with all value exactly matching with the exchange data. However, if one wants to view 5, 10, 30, etc. seconds historical intraday chart, then uncheck this option.  Previous Intra Data Here the user can set the number of historical intraday data that he wish to see on chart.  Delete Intra Files Before All downloaded intraday files get locally stored on your machine. Hence if we want to delete them, you can set a date prior to which you want to delete files and hit ‘Delete’ button.

5th Tab  Select Scrip

Here one can select different options which should be visible when searching for a scrip in ‘Add / Change Scrip’ window.

www.foxtrader.in

9

© Reliable Software

6th Tab  Study

This tab has options which are verified while detecting a candle pattern on chart. A candle pattern is detected based on above variables. So one can tune in these variables according to how he wants the detection to happen.  Customize Study Colors Button Here one can set the colors for different category of studies. The same will be visible on Adding study on chart.  Include Current Day for Option Studies The current live market day is included in ‘Days2Expiry’ field to calculate all Option Greeks. By default it is checked.

www.foxtrader.in

10

© Reliable Software

7th Tab  Patterns

Fox has Point & Figure, Renko and Kagi Chart too. The default settings to draw those charts are set here. Any changes done on any Tab, make sure we click ‘Save’ button at the bottom to bring changes in effect.

Scrip Level Operation Chart One of the core feature in Technical Analysis is historical chart. EOD data is available from 1990 onwards. Gaps due to rights, bonus, split & dividend are by default adjusted on charts, however if a user wants raw unadjusted data, even that is possible to get. All possibility of chart analysis are included. You can access Charts on Menu Bar and click Scrip Chart to open chart from desired exchange.

Image below shows the features that we present on the chart.

www.foxtrader.in

11

© Reliable Software

 G – Group User can click on ‘G’ which opens Group window. Double click on the Group and then on the scrip that you like to see, thereafter use PageUp and PageDown keys to navigate scrips 1 by 1 within the selected group.  Scrip Name Click on the scrip name to change the scrip.  D – Daily This option is to change the period on chart. You can also use ‘Ctrl+I’ shortcut to open period window from where we can change the period of chart. Use shortcuts ‘I’ ‘D’, ‘W’, ‘M’, ‘Q’, ‘Y’ for Intraday, Daily, Weekly, Monthly, Quarterly, Yearly charts. For any other custom period chart, make use of the box below.

www.foxtrader.in

12

© Reliable Software

 Chart Pattern User can change the chart pattern to Normal (Candle Chart), Heikin-Ashi P&F, Renko, Range Bar & Kagi chart.  Price Type User can change the Price type here to Line, OHLC, HLC, Candle, Fox, Hidden chart.  Tools User can choose to add line tools from 56 tools available. They have been categorized as Text, Lines, Channels, Retracements, Fans, Cycles, Circle, Spiral, Shape and Images tools.  Study Manager Add, Modify, Remove, Replace, Suggested, Load, Save As, Remove All, Show / Hide All & Export are the button provided here on this single window. These option are used to perform respective operation on studies. You can Save and Load Studies directly from here.  Chart Settings This window has many more customizations that can be done on active chart.

www.foxtrader.in

13

© Reliable Software

www.foxtrader.in

14

© Reliable Software

Note :- Chart settings done from active chart will apply only to that chart. However if you want to do a global chart settings that should be applied to all charts that you open, in that case access Chart Settings – Default from Chart Menu and customize it to save it.

Multiple Charts User can open as many charts as he wants. He can access Charts Menu -> Scrip Chart to open desired stock’s chart, this action can be performed multiple times to open multiple chart and then use Shortcut ‘Ctrl+T’ to tile all charts equally on the screen. Another shortcut to open multiple charts is to open 1 chart and then right click on it to access ‘Clone Chart’. The number of times you hit ‘Clone Chart’ that many number of times it will open new chart. Tile them on screen and change the scrip 1 by 1 by activating the respective chart.

www.foxtrader.in

15

© Reliable Software

Tile Charts

Market Profile Charts Menu  Market Profile This is an advanced charting study that displays trading activity over a specified time period at specified price levels. The study (accounting for user defined parameters such as number of rows and time period) plots a histogram on the chart meant to reveal dominant and/or significant price levels based on volume. Essentially, Volume Profile takes the total volume traded at a specific price level during the specified time period and divides the total volume into either buy volume or sell volume and then makes that information easily visible to the trader.

www.foxtrader.in

16

© Reliable Software

Support and Resistance Levels The first thing that most traders will use volume profile for is identifying basic support and resistance levels. Basic technical analysis has shown that a support level is a price level which will support a price on its way down and a resistance level is a price level which will resist price on its way up. Therefore, one can conclude that a price level near the bottom of the profile which heavily favors the buy side in terms of volume is a good indication of a support level. The opposite is also true. A price level near the top of the profile which heavily favors sell side volume is a good indication of a resistance level.  Why will you use Market Profile? Just like with most other tools or studies, Volume Profile has a number of uses. There are many trading strategies out there using Volume Profile as a key component. Below are the basics of one such strategy which is based on comparing the current day’s opening price to the previous day’s Volume Profile.  If the current day opens above the previous day’s value area (but still below the Profile High) look for price to retrace back towards the Point of Control and then proceed to rise (the direction of the day’s open). Therefore during the retracement to the Point of Control, there is a buying opportunity.  If the current day opens below the previous day’s value area (but still above the Profile Low) look for price to retrace back towards the Point of www.foxtrader.in

17

© Reliable Software

Control and then proceed to fall (the direction of the day’s open). Therefore during the retracement to the Point of Control, there is a selling opportunity.  If the current day’s opening price is completely outside of the previous day’s profile (above the Profile High or below the Profile Low) this can be seen as a possible runner in the direction of the opening price relative to the previous day’s profile range.  How to set Market Profile? Click on Analysis Menu and select Market Profile. Drop down the segment box and select the desired exchange, Type few initials of the scripname and select the one from the list. Click on Show, by default it will show last 10 days volume profile on the bar itself. If it does not show up, then we need to download Volume Profile files from Download Intraday Files window.

Volume Profile Analysis  Volume Profile RT This is as same as Market profile except it shows only current days volume profile. For interpretation and explanation, please refer to Market Profile. There are three different ways you can look at the volume profile chart.

www.foxtrader.in

18

© Reliable Software

Time Profile Analysis  Time Profile This is as same as Market Profile except that here focus is drawn on movement of scrips at different price levels during different time intervals in a day. The Time intervals are represented in alphabets here.

Advance Alerts Scanners  Advance Alerts

www.foxtrader.in

19

© Reliable Software

Get Alerts when a stock crosses up / down the price you specify or when a custom condition given using fx button is satisfied. You can modify / delete existing alerts. When you add a scrip, it shows last 10 days EOD data, Tick data (Intra Chart) of last 5 mins and Days Volume Profile of that stock in graphical area.  Why will you Advance Alerts?  To set a level breakout event on your stocks without being to monitor it constantly.  Wanting to set multiple price breakout event  Want to semi auto trade your triggered alerts.  How to set Advance Alert? Click on Scanners Menu and select Advance Alerts. When you click ‘New’ here, Drop down the segment box and select the desired exchange, Type few initials of the scripname and select the one from the list. It will present EOD, Intra and Volume Profile data graph at the bottom. Here, User can click on the price scale to select the price where alert should trigger. One can manually put the trigger price as well. Click on ‘D’ button to get an Auto Message that will be voiced out / displayed, when that alert is triggered. You can also choose to open Buy Window / Sell Window / Chart under Action Drop Down. fx Example :- To generate a Buy Alert when stocks has crossed 3% up from yesterday close and is trading below 3.25%. You can use following query for that. www.foxtrader.in

20

© Reliable Software

((((PClose - Last) / PClose)*100) >= 3) and ((((PClose - Last) / PClose)*100) <= 3.25) PClose, Last, etc are the variables that can be used with all mathematical operation to form a condition like this.

Alerts Scanners  Alerts

This Alerts is as same as Advance Alerts except that it does not have graphical representation of the chart and custom condition fx button.

Derivative Summary For Scrip Analysis  Derivative Summary for Scrip Derivative Summary window graphically represents Futures & Options data for the selected scrip trading in Derivative Segment. It shows the QTY and OI built up in Call and Put graphically on the top right side. It shows Put-Call ratio values, Call Vs Put Qty, Call Vs Put OI & Call Vs Put OI Change for historical days.

www.foxtrader.in

21

© Reliable Software

 Why will you use Derivative Summary?  To analyze Future & Call Put data of a contract.  To measure Volume & OI built-up in Call / Put contracts.

 How to set Derivative Summary window?  Click on Markets Menu and select Derivative Summary

Scrip Scan Scrip Scan is used to scan the selected stock on specified criteria that is set in Studies. Scan can be done in Manual / Live Mode. You can use multiple ‘Scrip Scan’ to scan different stocks for different signals / conditions set.

www.foxtrader.in

22

© Reliable Software

 Why will you use Scrip Scan?  To scan different stocks on different signals / conditions set.  To get this scan results in Event Watch.  How to set Scrip Scan?  Select the Stock and the period on which scan is to be done.  Click on Studies and load the studies which contains the signals / conditions to be scanned.  Check Send Events, if you want to see the scanned results in Event Watch.  Check Send Orders, if Order is to be send when the signal / condition is satisfied.  Select Mode -> Manual / Live. (Manual will show the current scanned results in the window & Live will scan the stocks live and through the results on time period selected  Finally, click on Scan.

Tick List Tick List is a window that shows Rate, Buy/Sell, Quantity, Value in lakhs, Open Interest, Rate Change for the selected scrip. By default, it shows ticks from current time however, you may also opt for ‘Previous Ticks’ to show ticks right from the start. The data here can be seen in Graphical Bubbles which will catch the user eye in case of unusual tick (Check Graph option in Run Tab). Alternatively you can opt to put a conditional filter to display records with more than defined tick size using Filter Option available on a right click.

www.foxtrader.in

23

© Reliable Software

Group Level Operations Market Watch Market watch is a window, where you get to see real time streaming quotes for group of stocks / contracts. Here it displays %Change, LTP, Bid & Offer Rates, Open Interest, Open, High, Low Rates, Live Candle Patterns, DPR, NetPosition, All Greek Values for Option Contracts and many more useful live information which help traders to trade effectively. One can track their positions live here by putting in NetPosition Qty and NetAvg Price. It will show MTMPL, MTMPL Pcnt, Day Chng PL values calculated on basis on input values. This window has ‘Import Positions’ button which helps to import positions from excel sheet (Excel sheet should contain columns that are defined by us and are supported in our product). It also has ‘Export DDE’ that helps to export data in excel that keeps on updating Live. For this you have to ‘Start’ DDEServerForm, which is available in www.foxtrader.in

24

© Reliable Software

Fox Menu -> DDE Server. While exporting dde, it asks for ‘Name’, give any name of your choice and open that file from t:\ReliableSoftware\Personal\MainUser\Export\ folder Now get a different experience by looking at graphical representation of data. It shows Bid, Offer and Trades info in Circle and Rhombus shape. Bigger Circle and Rhombus’s shapes notifies bigger Bid / Offer and Trade happening in that contract. It has OHLC Graph View that displays Support and Resistance zones for each contracts and it helps to identify contracts opening zone and trading zone. Last Graph view is of %Change which displays candlestick for each contracts along with the %Chng. This graph also helps to identify market Bullish and Bearish sentiments.

 Why will you use market watch?      

To see real time quotes of desired scrips. To guage the market sentiments. To track Positions live. To import Positions from an excel file. To export the data in excel that update live To capture unusual activity in stocks.

 How to set market watch window ? www.foxtrader.in

25

© Reliable Software

Click on Markets Menu and select Basic Watch to invoke Select Group Window. Here you can double Click on desired Exchange Defined group or Used defined group to get streaming quotes of contracts within it. You can also use the shortcut key ‘F4’ to open Market watch window. Customizing Market watch Customization options are all available on right click of Market Watch. Options available in Right click are…  Chart  Pause / Start Live Quotes  Save / Load Watch  Save / Load Scrip List  Remove / Remove All  Add Scrip / Add Group  Trading -> Buy Order / Sell Order  View -> Touchline, Market Depth, Events, Option Chain, Large Trades, Tick List, Dashboard, Corporate Action, EOD Data, Derivative Summary, Related Scrips  Set Price Alert  Column Selection  Auto Resize Columns  Filter Editor  Custom Query  Add / Edit Computed columns  Color  Graph View 1  Graph View 2  Watch Settings -> a) Number of Digits after decimal b) Updation Timer in Sec c) Color Entire Row Using -> Pcnt Chng / Last Rate / Bid Rate / Bid Qty / Offer Rate / Offer Qty d) Apply Up / Down Colors e) Append Group

Pivot Watch Pivot watch will display the values of Support & Resistance Levels in Tabular and graphical format for selected Pivot Type. www.foxtrader.in

26

© Reliable Software

Report Base:  Today: Will display you figures based on Yesterday’s High, Low & Close Values.  Tomorrow: Will display you figures based on Today’s High, Low & Close Values.  Rate: Will show actual figures in Price.  Difference: Will show difference between Yesterday’s Close and the Level’s Values.  Percentage: Will show you Percentage difference between Yesterday’s Close and the Level’s Values.  Why will you use Pivot watch?    

To know Support and Resistance levels for stocks. To know the levels the stocks have broken out. To know the zones where stock is trading. Identify easily, whether the stock is trading above / below its Average Traded Price.

 How to open Pivot watch window ? Click on Markets Menu and select Pivot Watch. Double click on the desired group and click Apply.

Spread Watch Spread Watch displays Cash-Futures Spread values. It will be available on all those underlying stocks on which derivative scrips are available for trading. It www.foxtrader.in

27

© Reliable Software

will show spread values of Cash – Current Month, Cash – Next Moth and Cash – Far Month contracts keeping the base value at 100.

 Why will you use Spread watch?  To know the contract trading at a higher premium / discount.  How to access Spread watch window? Click on Markets Menu and select Spread Watch.

Option Chain This window by default open up Nifty’s option chain. It shows the greek and other related values for calls and puts on the left and right side respectively. Just below the title bar, it shows Put-Call Ratio, Call Value, Put Values, Call OI and Put OI values. At the bottom, there are 3 graphs. Left side graph displays the comparison between Current Call OI Vs Previous Call OI and Current Put OI Vs Previous Put OI for different strike prices. The other two graphs on the right

www.foxtrader.in

28

© Reliable Software

displays the real time IV information for call and put at different strike levels. To change contract or settings, click on 2 headed arrow on the left.

 Why will you use Option Chain?  To know the highest OI built up on a strike price.  To know if there is jump in IV’s  To see greek and other related values for call and put together for a strike price.  How to access Option Chain window? Click on Markets Menu and select Option Chain.

Index Watch Mini This window shows the indexes / Stocks, its value and up / down points. One can add scrip or a group of stocks using ‘+’ sign located on the right. Arrow button is used to move and place this window anywhere you want to. Use ‘X’ sign to remove the index / scrip that is added.

www.foxtrader.in

29

© Reliable Software

 Why will you use Index Watch Mini? To see favourite stock’s or Indexes current value and its up/down points.  How to access Index Watch Mini? Click on Markets Menu and select Index Watch Mini.

ADS Watch Mini This window shows Advance Decline Same values (Market Breadth) for the segment that is subscribed. One can add exchange defined group and see its market breadth values. Arrow button is used to move and place this window anywhere you want to. Use ‘X’ sign to remove the Segment / Group that is added.

 Why will you use ADS Watch Mini? To guage market sentiments.  How to access ADS Watch Mini? Click on Markets Menu and select Index Watch Mini.

Group Summary. Group Summary highlight important triggers such as Price Gainers / Losers, Weekly Gainers / Losers, Turnover Gainers, Volume Open Interest Gainers, Open Interest Gainers / Losers, Momentum Gainers / Losers, Only Buyers and Sellers scrips in Graphical / Tabular form. User can select to view number of scrips in display for each triggers. These triggers will keep on Auto refreshing after specified interval.

www.foxtrader.in

30

© Reliable Software

 Why will you use Group Summary?  To know the leaders and losers simultaneously in market graphically in 1 glance.  Always get updated stocks here.  Choose different filters to show it together on 1 window.  How to set Group Summary window? Click on Markets Menu and select Group Summary. Double click on the desired group and click ‘Show’. You can also choose from filters to be shown from the filter drop down.

Intra ADS Intra ADS captures minute wise exchange Advance Decline Same (Market Breadth) data. This ADS is based on LastRate % Change with respect to yesterdays close. The same is plotted graphically along with Nifty’s price (Can be changed to some other group also) overlaid in the section below to show if the sentiments are changing the direction. This graph can be looked in % basis also (Check % box on the right). In tabular representation, we have High

www.foxtrader.in

31

© Reliable Software

Breaker and Low Breaker. High breaker is the no. of stocks hit high and Low breaker is no. of stocks hit low. It also contains the ADS values based on Open values and Open with respect to yesterdays close value.

 Why will you use Intra ADS?  To trace sentiments shifting.  How to access Intra ADS? Click on Markets Menu and select Intra ADS.

Sector ADS Sector ADS captures minute wise Advance Decline Same (Market Breadth) data for all exchange defined groups. This ADS is based on LastRate % Change with respect to yesterdays close. Here one selects the Groups for which Market breadth data is to be seen. It is plotted graphically in the section below to show the strength and weakness in different sectors.

www.foxtrader.in

32

© Reliable Software

 Why will you use Intra ADS? To identify the strong and weak sectors.  How to access Sector ADS? Click on Markets Menu and select Sector ADS. Select the exchange defined groups for which ADS is to be seen. Click on Show.

Tick Watch Tick Watch helps to track bulk trades executed in scrips across the Group / Exchange selected. Tracking happens based on Quantity and Value traded. User can also set values for “Previous days Close from and to” filter, so that it filters scrips based on this settings as well.

www.foxtrader.in

33

© Reliable Software

 Why will you use Tick watch?  To capture bulk deals happening in stocks.  To capture stocks based on price conditions set by you.  How to set Tick watch window? Click on Scanners Menu and select Tick Watch. Click on ‘New’ to make new tick watch, alternatively, you can drop down ‘Saved’ box and select the custom tick watch to load. On clicking ‘New’, User can select desired Exchange, Group or specific Company. Select the filter as desired from ‘Filter’ drop down and put some custom condition using fx button (Check Use Condition) if required to get filtered stocks. Name the tick watch and click on Apply.

Event Watch Event Watch helps to filter scrips based on predefined events in selected group / exchanges. Pre-defined events are categorized as Bullish and Bearish Events + few Activity Conditions Bullish Events….  At High of the Day  At High of the Day with Tick Diff  At High of the Day + PrevDay  Bounce Back From Day Low

www.foxtrader.in

34

© Reliable Software

          

Breaking 1st Resistance Breaking 2nd Resistance Breaking 3rd Resistance Breaking 52Week High Breaking Previous Day’s High Crossing above Pivot Filled Gap Down Large Bid Qty No Sellers Opened with Gap Up Scan Signal Long

Bearish Events….  At Low of the Day  At Low of the Day with Tick Diff  At Low of the Day + PrevDay  Breaking 1st Support  Breaking 2nd Support  Breaking 3rd Support  Breaking Previous Day’s Low  Crossing below pivot  Filled Gap Up  Large Offer Qty  No Buyers  Opened with Gap Down  Pull Back From Day High  Scan Signal Out  Scan Signal Short Activity Events….  Crossing Prev Days Vol Pcnt  Increase in Open Int  Decrease in Open Int  Large Trade  Personal Buy  Personal Sell  Scan Condition  Scan Signal Any  Vol Crossing Prev Day’s Volume

www.foxtrader.in

35

© Reliable Software

 Why will you use Event watch?  To scan stocks on Bullish / Bearish pre-defined conditions.  To get stocks filtering out from scanners.  To hear the event on filtered stocks.  How to set Event watch window? Click on Scanners Menu and select Event Watch. Click on ‘New’ to make new Event watch, alternatively, you can drop down ‘Saved’ box and select the custom Event watch to load. On clicking ‘New’, User can select desired Exchange, Group or specific Company. Select the Events as desired when you click on ‘Arrow’. Name the event watch and click on Apply. You can ‘Enable Voice Feature’ functionality from Account Menu  ‘Voice Settings’ to voice out the filtered stocks with its event.

Market Summary. Market summary gives real time summarized snapshot of scrips in the list of Tops & Bottoms sorted based on Day Pcnt Change (Price Gainer / Loser), Weekly Pcnt Change (Weekly Gainer / Loser), Expiry Pcnt Change (Expiry Gainer / Loser), OpenInt Value Change (OI Value Gainer / Loser), etc. One can use Custom to make its own Custom Condition based on which stocks should be filtered.

www.foxtrader.in

36

© Reliable Software

 Why will you use Market Summary?  To know the leaders and losers in market.  Always get updated stocks.  How to set Market Summary window? Click on Scanners Menu and select Market Summary. Double click on the desired group and select the condition to get the list of Top / Bottom scrips on condition selected.

Group Scan Group Scan is a utility that helps user to scan any group of stocks for a defined set of Ready / custom conditions, signals or created strategy to get desired results. It is also used to do a group level back testing of your strategy. Condition / Signals can be anything. For. E.g.  5 Exp. Moving Average crosses 20 Exp. Moving Average Upward / Downward  RSI trading above 50 level and Closing price is above 200 simple moving average  Closing price cutting previous swing top upward / Downward  Complex Conditions made using many andings / orings / etc…  Strategy giving Long, Short and Out signals.  And so on…..

www.foxtrader.in

37

© Reliable Software

Group Level Back Testing (Portfolio Back Testing)  Any strategy giving profit / loss values. (Sum of all Profit / Loss figures in the footer)

 Why will you use Group Scan? You will certainly not go through all charts in a group to check if there is a signal as it would take lot of time to go through each scrip one by one and strain in eyes is another problem that we would come across. Hence Scan is a facility that helps you find such filters in seconds.  How to set Group Scan?  Go to Scanners  Group Scan.

www.foxtrader.in

38

© Reliable Software

 Click on New  Select the desired group.  Click on ‘Normal – D’ Drop down to select desired period. Intraday period should be specified in seconds. For e.g. – To scan on 5 minutes, it should be ‘Intra’ with 300 seconds.  Click on Studies and load the studies which contains the signals / conditions / strategy to be scanned.  Select Mode -> Manual / Timer / OnEveryTick / OnBarCompletion.  Manual - will run and show the current time scanned results.  OnTimer - will run at a regular interval of timer defined (Seconds) to show results.  OnEveryTick – will run live as and when ticks come in stocks to through the results.  OnBarCompletion - While the Intraday Bar goes up and down, the signal on that comes and goes. Only when the next bar opens, the signal on previous bar is confirmed and it stays. Hence if we want to scan confirmed signal on Intraday bar, we keep it on OnBarCompletion mode.  Check Additional filters using ‘Filters’ drop down, if you want to apply them.  Check Expression Filter, if you have made a custom expression.  Check Generate Events, if you want to see the scanned results in Event Watch.  Check Send Orders, if Order is to be send when the signal / condition is satisfied. (Note :- Study loaded should be having Condition to Orders indicator to be able to send orders in a client code).  Name the Scan and Save it.  Finally, click on Scan.  How to run an Saved Scan?  Go to Scanners  Group Scan.  Click on Drop Down and select the desired scan  Click on Scan.  How to Edit a Scan?  To edit a running scan, click on Close and then ‘Edit’ to make changes.

www.foxtrader.in

39

© Reliable Software

 To edit an Saved scan, open fresh Group Scan window. Click on Drop Down and select the desired scan. Click on ‘Edit’ to make changes.

Group Chart We do Fundamental Analysis to look at the growth prospects of the company in the near future. We also do Technical Analysis on them to find the right time to buy that company for long term profits. In Group Chart, we use the historical data of the company and compare it with other company’s historical data within the sector to find which company is performing better. It is not necessary that if Index A is moving, then all the companies within the sector are moving. There are few companies in that sector which holds responsible to drag the index in trending upward. Hence if we invest in those companies, we may get handsome returns. Let us take an example, I see that FMCG sector is booming and as per the news it will remain in the limelight for the next 5 years. So I need to find out 2-3 such companies in that sector in which I can invest to get good returns. Let us see how we can do that…

 Why will you use Group Chart?  To identify the potential stock in a group.  To identify the sector that is performing.

www.foxtrader.in

40

© Reliable Software

 How to set Group Chart?  Go to Chart  Group Chart.  Select the desired group  Select / Unselect scrips from the group using the drop down, if required.  Specify No. Of Bars / set from – to date.  Select Period  Click Show.

www.foxtrader.in

41

© Reliable Software