How to Disable Power Scan Settings on PowerOne Inverters 1. 2. 3. 4. 5. 6. 7. 8.
Please access your PowerOne inverter, and press the ESC button Scroll down using the arrow keys to get to “Settings” Press “Enter” to access the password entry display Input 0000, then press “Enter” Scroll down using the arrow keys to get to “MPPTScan En/Dis” Press “Enter” Use scroll keys to select “Disabled”, and press “Enter” to save settings The display will go back to “MPPTScan En/Dis”, so press “Enter” to verify that settings show “Disabled”.
If your inverter does not allow “Disabled” settings on the MPPT Scan, please follow these steps to lengthen the scan interval to its maximum: 1. After going through steps 1-4 above, use the scroll keys to select “Scan Interval”, and press “Enter” 2. The default setting is “15 min” 3. Use scroll keys to set the scan interval to its max (most inverter models = 540 min) 4. Press “Enter” to save the settings If you experience issues during this process or have any questions, please contact
[email protected] or call us at 408-402-0802.
Tigo Energy, Inc. | 420 Blossom Hill Road, Los Gatos, California USA 95032 | P: +1.408.402.0802 | F: +1.408.358.6279 | www.tigoenergy.com