Idoc Create

Introduction This document illustrates on how to create IDoc flat file on SAP application server. Scenario: On change or Create of SAP delivery document, an automatic IDoc should trigger and an IDoc file to be created on the SAP application server. Perquisite: We can use Standard Delivery IDoc and Message Type i.e. (Basic Type: DELVRY03, Message Type: DESADV) for our scenario Steps in the SAP R/3 Backend System Step1 Run T-Code WE82 link IDoc type and message type.

Step2 Create Output type for delivery i.e. ZAEB. For this configuration go to T-Code NACE.

Step3 Click on

.

Step4 Give output Type, Description, Access Sequence then press

Step5 Click on

from left navigation panel.

.

Step6 Click on

and give necessary program name, subroutine and save entry.

Step7 Click on

from left navigation panel.

Step8 Select medium, input partner function and save entry.

Step9 Now again back to T-Code NACE screen and click on

Step10 Assign output type to standard procedure and save it. For this select any standard procedure and click on control from left navigation panel.

Step11 Enter step, counter, output type and save it.

Step12 Setup condition record for above created output type to trigger it automatically on the press of save of delivery. For this Run T-Code NACR, Press enter

Step13 Now create logical path and assign it physical path where our IDoc file store. Run T-Code FILE

Select logical path and click on

Click on New Entries.

from left navigation panel.

Save it. Step14 Now create file port. For this Run T-Code WE21

Select FILE port from left navigation panel and click on

Give port name, Description, Directory & Function module name for file naming convention and save it.

Step15 Now create partner profile. For this firstly create Partner (LOGICAL SYSTEM) via T-Code BD54

Save it.

Setup partner profile. Run T-Code WE20

And Save it. Now add Message Type into outbound parameters:

Now enter below mention parameters and save it.

Now click on Message Control Tab.

Save it. Step16 Now Create Distribution Model View. For this Run T-Code BD64

Click on

then click on

Fill entry and click on

a popup window will appear.

.

Now select above created model view and click on appear.

. Another popup window will

Fill entries and click on

Where SENDER

= <System ID>CLNT

And

RECEIVER

=

AND

MESSAGE TYPE =

Now save the entry.

Step17 Now it’s time for testing the IDoc. If all the things work fine then an IDoc file created into SAP Application directory which mention above i.e. < D:\usr\sap\EH5\SYS\profile>. For this first open any one delivery whose sales organization will be ‘3000’ and sold-to-party will be‘91300’ because we have only maintains the condition record for these entry. T-Code VL02N

Press enter.

Now check our output type will be trigger successfully or not. For this open delivery click on output type.

Now select this record and click on

Open this IDoc into T-Code WE02

button.

Now Check IDoc files on application directory, for this run T-Code AL11

Double Click on it. See IDoc File which contains IDoc Number in file naming.

To Download this file from SAP application sever to Local Desktop run T-Code CG3Y,Popup window will appears

Give above created file name with path into Source File input filed and give path where you download your file into your local desktop then press

After this check your local directory.

.