AAU5942(1800+2100)
AAU5942 Issue
Draft A
Date
2019-11-08
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd. Address:
Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China
Website:
https://www.huawei.com
Email:
[email protected]
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
i
AAU5942(1800+2100) AAU5942
Foreword
Foreword Product Exterior
Document Version Product Name
Solution Version
Product Version
AAU5942
SRAN16.1 and later
V100R016C10 and later
eRAN16.1 and later
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
ii
AAU5942(1800+2100) AAU5942
Contents
Contents Foreword ........................................................................................................................................... ii 1 Overview......................................................................................................................................... 1 1.1 Exterior ......................................................................................................................................................................... 2 1.2 Physical Ports ............................................................................................................................................................... 2
2 Technical Specifications .............................................................................................................. 4 2.1 Active Module Frequency Band ................................................................................................................................... 4 2.2 Antenna Electrical Specifications ................................................................................................................................. 5 2.3 EIRP ............................................................................................................................................................................. 5 2.4 EIRS ............................................................................................................................................................................. 6 2.5 Capacity ........................................................................................................................................................................ 6 2.6 Typical Output Power ................................................................................................................................................... 7 2.7 Power Consumption...................................................................................................................................................... 7 2.8 Input Power ................................................................................................................................................................... 7 2.9 Equipment Specifications ............................................................................................................................................. 8 2.10 CPRI Port Specifications ............................................................................................................................................ 8 2.11 Environmental Specifications ..................................................................................................................................... 9
3 Acronyms and Abbreviations ................................................................................................... 11
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
iii
AAU5942(1800+2100) AAU5942
1 Overview
1
Overview
The active antenna system (AAS) is a new type of RF module, which incorporates the functions of the RRU and antenna. Compared with a conventional site where the RRU and antenna are separated from each other, an AAS site has the following advantages:
Simplified site resources
Easier installation
Reduced jumper loss and energy consumption
As the mobile broadband (MBB) develops rapidly, multimode and multiband base stations have become the mainstream products. However, the increasing site complexity and module addition considerably raise the operating expense (OPEX). Simplification of sites is becoming a trend in building multimode and multiband networks. In addition, with the increase in LTE UEs, the hotspot area capacity and coverage problems are becoming a major concern of the operators. To help operators conquer those challenges, Huawei took the lead in introducing the AAS technology and launched AAU series products.
Multiband AAU series This series requires less rooftop space.
Easy Macro series This series makes quick deployment possible.
Multi-antenna multi-channel AAU series This series improves the network capacity.
Easy Macro series products feature small size, light weight, environment integration, and easy deployment. They are preferentially selected for site densification in urban areas. The AAU5942 is one of these products. It boasts the following characteristics:
It uses software-defined band (SDB) technology so that it flexibly meets requirements in different coverage scenarios for operators.
It reduces about 0.8 dB feeder loss and further enhances coverage capability by integrating the RF module to the antenna.
It adopts an elegant design and facilitates site acquisition. It is mainly applied to a street-pole-mounted site, a rooftop site, and a wall-mounted site. It can be installed on the pole or wall.
1.1 Exterior
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
1
AAU5942(1800+2100) AAU5942
1 Overview
1.2 Physical Ports
1.1 Exterior Figure 1-1 shows the AAU5942 exterior. Figure 1-1 AAU5942 exterior
1.2 Physical Ports Figure 1-2 shows physical ports on the AAU5942 and Table 1-1 describes these ports.
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
2
AAU5942(1800+2100) AAU5942
1 Overview
Figure 1-2 Physical ports on the AAU5942
Table 1-1 Physical ports on the AAU5942 No.
Silkscreen
Port Type
Connector Type
Quantity
Description
1
PWR
Power port
DC fast connector
1
–48 V DC input
3-pin AC terminal
1
220 V AC
110 V AC dual-live-wire
SFP+
2
2
CPRI0
CPRI port
CPRI1
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
CPRI0 and CPRI1 ports for high-speed signals; data rate of 2.5 Gbit/s, 4.9 Gbit/s, or 9.8 Gbit/s
3
AAU5942(1800+2100) AAU5942
2 Technical Specifications
2
Technical Specifications
2.1 Active Module Frequency Band 2.2 Antenna Electrical Specifications 2.3 EIRP 2.4 EIRS 2.5 Capacity 2.6 Typical Output Power 2.7 Power Consumption 2.8 Input Power 2.9 Equipment Specifications 2.10 CPRI Port Specifications 2.11 Environmental Specifications
2.1 Active Module Frequency Band Table 2-1 AAU5942 frequency bands Type
Frequency Band (MHz)
TX/RX Channel
RX Frequency Band (MHz)
TX Frequency Band (MHz)
IBW (MHz)
AAU5942
1800
4T4R
1710 to 1785
1805 to 1880
40
2100
4T4R
1920 to 1980
2110 to 2170
40
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
4
AAU5942(1800+2100) AAU5942
2 Technical Specifications
2.2 Antenna Electrical Specifications Item
Specifications
Frequency band (MHz)
1710 to 1880
1920 to 2170
Gain (dBi)
13.5
14
Vertical half-power beamwidth
13°
12°
Horizontal half-power beamwidth
70°
70°
Gain (dBi)
6.7
7.1
Vertical half-power beamwidth
68°
68°
Horizontal half-power beamwidth
70°
70°
Narrow beam
Wide beam
Mechanical tilt
Nonadjustable
Electrical tilt
Narrow beam: –3° to +12°
Wide beams do not support electrical downtilt.
Polarization
±45°
Cross polarization front-to-rear ratio
> 18 dB
Default electrical downtilt
0°
2.3 EIRP Table 2-2 AAU5942 EIRP Frequency Band (MHz)
EIRP
1800
64.2 dBm
2100
64.7 dBm
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
5
AAU5942(1800+2100) AAU5942
2 Technical Specifications
2.4 EIRS Table 2-3 AAU5942 EIRS Frequency Band (MHz)
Mode
EIRS
1800
GSM
–113.7 dBm – 13.5 dBi
LTE FDD
–106.1 dBm – 13.5 dBi
LTE NB-IoT
–132.5 dBm – 13.5 dBi
UMTS
–125.7 dBm – 14 dBi
LTE FDD
–106.1 dBm – 14 dBi
2100
As recommended in 3GPP TS 51.021, the GSM receiver sensitivity is measured at the antenna connector, assuming that the channel rate is 13 kbit/s and the bit error rate (BER) is lower than or equal to 2%.
As recommended in 3GPP TS 25.104, the UMTS receiver sensitivity is the receiver sensitivity measured at the antenna connector minus the antenna gain, assuming that the channel rate is 12.2 kbit/s and the BER is lower than or equal to 0.001.
As recommended in 3GPP TS 36.104, the LTE FDD receiver sensitivity is the receiver sensitivity measured based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard minus the antenna gain, assuming that the bandwidth is 5 MHz.
As recommended in 3GPP TS 36.104, the LTE NB-IoT receiver sensitivity is measured based on the FRC A14-1 in Annex A.14 (π/2 BPSK, R = 1/3, one RB) standard, assuming that the bandwidth is 200 kHz and the subcarrier spacing is 15 kHz.
2.5 Capacity Table 2-4 Capacity (single-band) and output power of an AAU5942 Mode
Frequency Band (MHz)
Maximum Output Power
UMTS
2100
4x30 W
LTE FDD
1800/2100
GL
1800
UL
2100
Table 2-5 Capacity (dual-band) and output power of an AAU5942 Mode
Frequency Band (MHz)
Maximum Output Power
LTE FDD
1800+2100
GL
1800 (GL)+2100 (L)
4x40 W (maximum single-band output: 4x30 W)
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
6
AAU5942(1800+2100) AAU5942
2 Technical Specifications
Mode
Frequency Band (MHz)
UL
1800 (L)+2100 (U)
1800 (L)+2100 (UL)
1800 (GL)+2100 (U)
1800 (GL)+2100 (UL)
GUL
LTE NB-IoT+LTE FDD
1800 (LM)+2100 (L)
GSM+LTE NB-IoT+LTE FDD
1800 (GLM)+2100 (L)
GSM+LTE NB-IoT+UMTS+LTE FDD
1800 (GLM)+2100 (UL)
Maximum Output Power
2.6 Typical Output Power For details, see Typical Power Configuration Reference for AAUs.
2.7 Power Consumption Table 2-6 Power consumption Type
TX/RX Channel
Typical Power Consumption (W)
AAU5942
1800 MHz (FDD 4T4R)+2100 MHz (FDD 4T4R)
435
The typical power consumption is measured when the ambient temperature is 25°C and the AAU is 50% loaded.
2.8 Input Power Table 2-7 Input power Type
Input Power
AAU5942
220 V AC, voltage range: 176 V AC to 290 V AC 110 V AC, voltage range: 90 V/180 V AC to 135 V/270 V AC or 106 V/176 V AC to
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
7
AAU5942(1800+2100) AAU5942
2 Technical Specifications
Type
Input Power 150 V/260 V AC –48 V DC; voltage range: –36 V DC to –57 V DC
2.9 Equipment Specifications Table 2-8 Equipment specifications Item
Specifications
Dimensions (H x L x W)
680 mm x 220 mm x 150 mm
Weight
19 kg (without the mounting kits)
2.10 CPRI Port Specifications Table 2-9 CPRI port specifications Item
Specifications
Number of CPRI ports
2
CPRI data rate
2.5 Gbit/s, 4.9 Gbit/s, or 9.8 Gbit/s
CPRI-based topology
Star, chain, or dual-star
Cascading level
4
Maximum distance from a BBU (km)
UMTS: 40
LTE FDD:
Issue Draft A (2019-11-08)
−
When the LBBPc or LBBPd1 is configured: 20
−
When the LBBPd2 or UBBP is configured: 40
−
When the LBBPd3 is configured: 40 (number of cells ≤ 3); 20 (number of cells ≥4)
LTE NB-IoT: 20
Copyright © Huawei Technologies Co., Ltd.
8
AAU5942(1800+2100) AAU5942
2 Technical Specifications
2.11 Environmental Specifications Table 2-10 Environmental specifications Item
Specifications
Operating temperature
Without solar radiation: –40°C to +55°C
With solar radiation: –40°C to +50°C
NOTE According to the installation scenario, traffic load, and carrier configuration, the output power of an AAU temporarily decreases when the AAU reaches a temperature 10°C less than its maximum operating temperature.
Wind load (N)
Front: 135 (at a speed of 150 km/h)
Side: 70 (at a speed of 150 km/h)
Rear: 145 (at a speed of 150 km/h)
Operating wind speed (km/h)
150
Rated wind velocity (km/h)
200
Relative humidity
5% RH to 100% RH
Absolute humidity
1 g/m3 to 30 g/m3
Ingress protection rating
IP65
RF
This requires compliance with the following standards:
3GPP TS 25.141
3GPP TS 36.141
3GPP TS 37.141
Operating environment
This requires compliance with ETSI EN 300019-1-4 V2.1.2 (2003-04) Class 4.1: "Non-weather protected locations."
Shockproof protection
IEC 62305-1 Protection against lightning – Part 1: General principles
IEC 62305-3 Protection against lightning – Part 3: Physical damage to structures and life hazard
IEC 62305-4 Protection against lightning – Part 4: Electrical and electronic systems within structures
ITU-T K.35 Bonding configurations and earthing at remote electronic sites
ITU-T K.56 Protection of radio base stations against lightning discharges
ITU-T K.97 Lightning protection of distributed base stations
ETSI EN 300 253 Environmental Engineering(EE): Earthing and bonding configuration inside telecommunications centers
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
9
AAU5942(1800+2100) AAU5942
Item
Issue Draft A (2019-11-08)
2 Technical Specifications
Specifications
YD 2324-2011: Lightning protection requirements and test methods for radio base stations
GB/T 50689-2011: Code for design of lightning protection and earthing engineering for telecommunication bureaus (stations)
Copyright © Huawei Technologies Co., Ltd.
10
AAU5942(1800+2100) AAU5942
3 Acronyms and Abbreviations
3
Acronyms and Abbreviations
Table 3-1 Acronyms and abbreviations Acronym and Abbreviation
Full Name
AAS
active antenna system
BBU
baseband unit
BER
Bit error rate
CPRI
common public radio interface
EIRP
equivalent isotropically radiated power
EIRS
equivalent isotropically receiver sensitivity
GSM
Global System for Mobile Communications
LTE
Long Term Evolution
MBB
mobile broadband
MIMO
Multiple-input multiple-output
MSR
multi-standard radio
PA
power amplifier
RFU
radio frequency unit
RRU
radio remote unit
UMTS
Universal Mobile Telecommunications System
3GPP
3rd Generation Partnership Project
Issue Draft A (2019-11-08)
Copyright © Huawei Technologies Co., Ltd.
11