Pictorial Guide to Lifting Equipment Standards.
Document Reference LEEA 060
A Pictorial Guide to Lifting Equipment Standards Document reference LEEA 060 dated 12 January 2015
Published by the LIFTING EQUIPMENT ENGINEERS ASSOCIATION 3 Osprey Court, Kingfisher Way Hinchingbrooke Business Park Huntingdon PE29 6FN United Kingdom Tel: + 44 (0) 1480 432801 Fax: + 44 (0) 1480 436314 E-mail:
[email protected] Website: www.leeaint.com
CONTENTS 1.0 -
Introduction Manual Chain Hoist Lever Hoist Lifting / Pulling Machine Electric Powered Chain Hoist Air (Pneumatic) Powered Chain Hoist Hydraulic Powered Chain Hoist Electric Powered Wire Rope Hoist Winches Travelling Girder Trolley Beam Clamp Jib Crane Runway beam Mobile Gantry Hydraulic Jack Mechanical Jack Chain Slings Chain for lifting purposes Steel wire rope slings Steel wire rope for lifting purposes Sling Components Textile flat webbing slings Textile round slings Natural fibre rope slings Bow shackle Dee Shackle Eye bolt Lifting / spreader beam Plate lifting clamp Rigging screw and turnbuckles Barrel Lifters Crane forks C-Hooks Magnetic Lifter Vacuum Lifter
Page 1 Page 2 Page 2 Page 3 Page 3 Page 4 Page 4 Page 5 Page 5 Page 6 Page 6 Page 6 Page 7 Page 8 Page 8 Page 9 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 14 Page 14 Page 15 Page 15 Page 16 Page 16 Page 16 Page 17 Page 17 Page 18 Page 18 Page 18 Page 19
Document reference: LEEA 060, version 1, dated Jan 2015
1.0 Introduction The following gives details of National, European and International Standards connected with generic forms of Lifting Equipment. The list is by equipment type mainly as they appear in the LEEA COPSULE, and not alphabetical order. Note that due to the continued development of standards globally, the list is not guaranteed to be comprehensive. We are therefore always ready to consider additions and welcome comments. The document is intended to be a live document accessible on the LEEA website and updated regularly, and therefore, it is not recommended to download as saved versions could quickly become out of date. The guidance does not cover the horizontal standards for each product type and it is advised that reference is made to LEEA 015 for full listing of lifting equipment standards, or the normative references within the standard chosen. This document lists the standards numbers only and each number is a link to the relevant standards bodies’ website. The link will take you directly to the listed information provided by the standards body, such information will vary from body to body, but typically the information will contain the full title, brief summary of the scope, the current status and the purchase price*. This document also specifies the statutory in-service periods between thorough examinations only for each item of lifting equipment as recommended by LEEA for guidance. It should be noted, however, that under certain circumstance this statutory period of examination may be extended in accordance with a written scheme of examination. Further guidance on written examination schemes can be sought in LEEA 032 guidance document. It should also be noted that certain equipment will require examination after first installation and that all of the equipment will be subject to thorough examination following exceptional circumstances. The guidance only references the statutory requirements to save constant repetition of the above statement and to ensure that before applying a written scheme of examination members are advised to read our guidance on the subject first.
British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price.
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price.
Page 1
Generic Product Type
Designation
Description
Product /Manufacture Standards AS 2550.1-2011 AS 1418.1-2002/Amdt 1-2004
Manual Chain Hoist
A hand operated lifting machine capable of raising, lowering or suspending a load
Overhead Hoists (Underhung) (B30.16 - 2012) BS EN 13157:2004+A1:2009*
Inspection / Maintenance Standards AS 2550.1-2011 AS 1418.1-2002/Amdt 1-2004
Overhead Hoists (Underhung) (B30.16 2012)
Periodicity of Examination
Lifting Appliance 12 Monthly
ISO 7592:1983
Lever Hoist
A lever operated lifting machine capable of raising, lowering or suspending a load
AS 2550.1-2011
AS 1418.1-2002/Amdt 1-2004
AS 1418.1-2002/Amdt 1-2004
AS 2550.1-2011
Lever Hoists (B30.21 - 2014)
Lever Hoists (B30.21 2014)
Lifting Appliance 12 Monthly
BS EN 13157:2004+A1:2009* ISO 7592:1983
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price. Page 2
Document reference: LEEA 060, version 1, dated Jan 2015
Generic Product Type
Designation
Lifting / Pulling Machine (inc rope)
Electric Powered Chain Hoist
Description An appliance capable of carrying out either lifting operations or pulling operations. Must only be used with a rope designed to be fitted to a specific lifting / pulling machine.
Generally used where a permanent lifting facility is required in conjunction with either an overhead runway, jib crane or overhead travelling crane.
Product /Manufacture Standards
Inspection / Maintenance Standards
BS EN 13157:2004+A1:2009*
NONE
AS 1418.1-2002/Amdt 1-2004
AS 1418.1-2002/Amdt 1-2004
AS 2550.1-2011 Overhead Hoists (Underhung) (B30.16 - 2012) BS EN 144922:2006+A1:2009* BS EN 60204-32:2008*
Periodicity of Examination
Lifting Appliance 12 Monthly
AS 2550.1-2011 Overhead Hoists (Underhung) (B30.16 2012)
Lifting Appliance 12 Monthly
ISO 7592:1983 BS 7121-2-7:2012*
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price.
Page 3
Generic Product Type
Designation
Air (pneumatic) Powered Chain Hoist
Hydraulic Powered Chain Hoist
Description Generally used where there is a requirement for a powered hoist but the use of an electric hoist is not allowed for safety reasons. Can be considerably smaller units than the equivalent electric powered chain hoist. Similar operation to the pneumatic powered chain hoist although instead of air pressure being used and then expelled into the atmosphere, oil pressure is used and remains captive within a sealed unit
Product /Manufacture Standards
Inspection / Maintenance Standards
Periodicity of Examination
AS 2550.1-2011 AS 1418.1-2002 Overhead Hoists (Underhung) (B30.16 - 2012) BS EN 144922:2006+A1:2009*
Overhead Hoists (Underhung) (B30.16 - 2012)
Lifting Appliance 12 Monthly
BS 7121-2-7:2012*
ISO 7592:1983
AS 2550.1-2011 AS 1418.1-2002 Overhead Hoists (Underhung) (B30.16 - 2012)
Overhead Hoists (Underhung) (B30.16 2012) BS 7121-2-7:2012*
BS EN 144922:2006+A1:2009*
Lifting Appliance 12 Monthly
ISO 7592:1983
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price. Page 4
Document reference: LEEA 060, version 1, dated Jan 2015
Generic Product Type
Designation
Description
Electric Powered Wire Rope Hoist
Generally used where a permanent lifting facility is required in conjunction with either an overhead runway, jib crane or overhead travelling crane
Product /Manufacture Standards
Inspection / Maintenance Standards
Periodicity of Examination
AS 1418.1-2002
Winches
Powered or manually operated versatile lifting and pulling machine. Can be used for permanent or temporary rigging applications. Especially suited to use in confined areas which offer less headroom. Can be remotely operated.
Overhead Hoists (Underhung) (B30.16 - 2012)
AS 2550.1-2011
BS EN 144922:2006+A1:2009*
Overhead Hoists (Underhung) (B30.16 2012)
BS EN 60204-32:2008*
BS 7121-2-7:2012*
Lifting Appliance 12 Monthly
BS ISO 16625:2013*
AS 1418.1-2002 (B30.7 - 2011) BS ISO 3730:2012* BS EN 13157:2004+A1:2009*
AS 2550.1-2011 (B30.7 - 2011)
Lifting Appliance 12 Monthly
BS EN 144921:2006+A1:2009*
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price.
Page 5
Generic Product Type
Designation
Description
Travelling Girder Trolley
Provide a means of moving a load suspended on a rolled steel structure in conjunction with either a hand or power operated lifting machine
Beam Clamp
Designed to provide a means of attaching lifting appliances to suitable structural steelwork.
Product /Manufacture Standards
BS EN 13157:2004+A1:2009*
Inspection / Maintenance Standards
NONE
Periodicity of Examination
Lifting Appliance 12 Monthly
BS EN 13155:2003+A2:2009*
NONE
Lifting Accessory 6 Monthly
Monorails and Underhung Cranes (B30.11 - 2010)
Jib Crane
Designed for use where a full overhead crane may be impractical. Only becomes a crane when fitted with a suitable block, block and trolley or similar lifting appliance.
BS 7333:1990*
ISO 7752-4:1989
Monorails and Underhung Cranes (B30.11 - 2010)
ISO 8686-4:2005
ISO 12480-1:1997
ISO 4301-4:1989
ISO 9374-4:1989
ISO 12480-4:2007
ISO 10245-4:2004
Structural Member Examination period to be the same as the appliance fitted
ISO 10972-4:2007 ISO 11660-4:2012
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price. Page 6
Document reference: LEEA 060, version 1, dated Jan 2015
Generic Product Type
Designation
Description
Product /Manufacture Standards
Inspection / Maintenance Standards
Periodicity of Examination
Monorails and Underhung Cranes (B30.11 - 2010) BS 2853:2011* BS EN 1090-2:2008+A1:2011*
Runway Beam
Generally manufactured from rolled steel sections or special track section systems. Designed to provide a track upon which a lifting appliance is fitted to.
BS EN 1991-1-1:2002* BS EN 1993-1-1:2005* BS EN 1993-1-2:2005*
Monorails and Underhung Cranes (B30.11 - 2010)
BS EN 1991-3:2006* BS 2853:2011* BS EN 1993-1-5:2006*
Structural Member Examination period to be the same as the appliance fitted.
BS EN 1993-1-6:2007* BS EN 1993-1-8:2005* BS EN 1993-1-9:2005* BS EN 1993-6:2007*
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price.
Page 7
Generic Product Type
Designation
Description
Product /Manufacture Standards
Inspection / Maintenance Standards
Periodicity of Examination
Monorails and Underhung Cranes (B30.11 - 2010) BS 2853:2011* BS EN 1090-2:2008+A1:2011*
Mobile Gantry
Generally designed as a temporary runway structure and used in conjunction with a hand or powered lifting appliance. Not generally intended for movement under load.
BS EN 1991-1-1:2002*
BS EN 1993-1-2:2005*
Monorails and Underhung Cranes (B30.11 - 2010)
BS EN 1991-3:2006*
BS 2853:2011*
BS EN 1993-1-1:2005*
Structural Member Examination period to be the same as the appliance fitted
BS EN 1993-1-5:2006* BS EN 1993-1-6:2007* BS EN 1993-1-8:2005* BS EN 1993-1-9:2005* BS EN 1993-6:2007*
Hydraulic Jack
Designed and used for raising and lowering a load over a limited range. Oil filled, hydraulic action.
AS/NZS 2615:2004 AS/NZS 2693:2007 Jacks (B30.1 - 2004)
AS/NZS 2615:2004 AS/NZS 2693:2007
Lifting Appliance
Jacks (B30.1 - 2004)
12 Monthly
BS EN 1494:2000+A1:2008*
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price. Page 8
Document reference: LEEA 060, version 1, dated Jan 2015
Generic Product Type
Designation
Description
Mechanical Jack
Designed and used for raising and lowering a load over a limited range. Mechanically operated.
Chain Slings
Assembly of one or more chains for attaching loads to the hook of a crane or other lifting machine
Product /Manufacture Standards
Inspection / Maintenance Standards
Periodicity of Examination
AS/NZS 2693:2007
Lifting Appliance
AS/NZS 2693:2007 Jacks (B30.1 - 2004) Jacks (B30.1 - 2004) BS EN 1494:2000+A1:2008*
AS 3775.1-2004/Amdt 1-2006
AS 3775.2-2004/Amdt 1-2006
AS 3776-2006
Slings (B30.9 - 2010)
Slings (B30.9 - 2010)
Below-the-Hook Lifting Devices (B30.20 2013)
Below-the-Hook Lifting Devices (B30.20 - 2013)
ISO 3056:1986 BS EN 818-4:1996+A1:2008* BS EN 818-5:1999+A1:2008*
BS EN 8186:2000+A1:2008*
ISO 4778:1981
BS 6304:1982*
ISO 7593:1986
ISO 4778:1981
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price.
12 Monthly
Lifting Accessory 6 Monthly
Page 9
Generic Product Type
Designation
Description
Product /Manufacture Standards
Inspection / Maintenance Standards
Periodicity of Examination
AS 2321-2006 BS EN 818-1:1996+A1:2008* BS EN 818-2:1996+A1:2008* BS EN 818-3:1999+A1:2008*
Chain for lifting purposes.
Only short link chain allowed for lifting purposes. Fine tolerance for use in lifting machines, medium tolerance used generally in the manufacture of lifting slings.
BS EN 818-7:2002+A1:2008* ISO 1834:1999
BS 6521:1984*
ISO 1835:1980
BS EN 8186:2000+A1:2008*
ISO 3075:1980
ISO 7592:1983
ISO 3076:2012 ISO 3077:2001
Examination is only required in use, i.e. once fitted to a machine or lifting accessory. The period of examination would therefore be the same as the machine or accessory to which it is fitted.
ISO 16872:2015 ISO 16877:2015 ISO 16872:2008
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price. Page 10
Document reference: LEEA 060, version 1, dated Jan 2015
Generic Product Type
Designation
Description
Product /Manufacture Standards
Inspection / Maintenance Standards
Periodicity of Examination
AS 1666.1-2009 Slings (B30.9 - 2010)
Steel Wire Rope Slings
Wire rope with an eye formed at each end to enable connection to the load and lifting appliance. The eyes may also have a lifting component encapsulated in the eye. A wire rope sling will generally comprise of a single leg or multiple legs.
Below-the-Hook Lifting Devices (B30.20 - 2013) BS EN 134111:2002+A1:2008*
AS 1666.2-2009
BS EN 134112:2001+A1:2008*
Slings (B30.9 - 2010)
BS EN 134113:2004+A1:2008*
Below-the-Hook Lifting Devices (B30.20 2013)
BS EN 134141:2003+A2:2008*
BS EN 134142:2003+A2:2008*
BS EN 134143:2003+A1:2008*
ISO 8792:1986
Lifting Accessory 6 Monthly
ISO 3108:1974 ISO 7531:1987 ISO 8793:1986 ISO 8794:1986
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price.
Page 11
Generic Product Type
Designation
Description
Product /Manufacture Standards
Inspection / Maintenance Standards
Periodicity of Examination
AS 2841-2005/Amdt 1-2011 AS 3569-2010/Amdt 1-2012 BS EN 12385-1:2002+A1:2008* BS EN 12385-2:2002+A1:2008* BS EN 12385-4:2002+A1:2008*
Steel Wire Rope for lifting purposes.
There are two main applications, steel wire rope used in the construction of slings, and steel wire rope used as hoist and winch media
BS EN 12385-5:2002* BS EN 12385-6:2004* BS EN 12385-7:2002* BS EN 12385-8:2002* BS EN 12385-9:2002* BS EN 13411-3:2004+A1:2008*
AS 2759-2004 BS EN 123853:2004+A1:2008* ISO 4309:2010
BS EN 13411-4:2011* BS EN 13411-5:2003+A1:2008* BS EN 13411-6:2004+A1:2008*
Examination is only required in use, i.e. once fitted to a machine or lifting accessory. The period of examination would therefore be the same as the machine or accessory to which it is fitted.
BS EN 13411-7:2006+A1:2008* BS ISO 10425:2003* BS EN ISO 16841:2014*
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price. Page 12
Document reference: LEEA 060, version 1, dated Jan 2015
Generic Product Type
Designation
Description
Product /Manufacture Standards
Inspection / Maintenance Standards
Periodicity of Examination
AS 3585-2008 AS 3776-2006 Hooks (B30.10 - 2009) BS EN 1677-1:2000+A1:2008* BS EN 1677-2:2000+A1:2008* Component Part
BS EN 1677-3:2001+A1:2008*
Sling Components
Designed to be incorporated as a terminal fitting as part of a sling for attaching a load to a lifting machine
BS EN 1677-4:2000+A1:2008* BS EN 1677-5:2001+A1:2008* BS EN 1677-6:2001+A1:2008* ISO 1837:2003
AS 3585-2008 Hooks (B30.10 - 2009) RR C 271 Revision D (Collection)
ISO 2308:1972
Only requires a LOLER Report of Thorough Examination if incorporated into a lifting accessory. 6 Monthly
ISO 4779:1986 ISO 7597:2013 ISO 8539:2009 RR C 271 Revision D (Collection) ISO 16798:2004
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price.
Page 13
Generic Product Type
Designation
Textile Flat Webbing Sling
Textile Round Slings
Natural Fibre Rope Slings
Description Assembly of one or more sewn webbing components for attaching loads to the hook of a crane or other lifting machine. Assembly of one or more sewn webbing components for attaching loads to the hook of a crane or other lifting machine. Traditional form of textile sling generally made from hemp, sisal or manila. Although still in use they have generally been replaced by textile flat and roundslings.
Product /Manufacture Standards
Inspection / Maintenance Standards
AS 1353.1-1997/Amdt 1-1998
AS 1353.2-1997
Slings (B30.9 - 2010)
Slings (B30.9 - 2010)
BS EN 1492-:2000+A1:2008*
BS EN 14924:2004+A1:2008*
Periodicity of Examination
Lifting Accessory 6 Monthly
AS 4497.2-1997 Slings (B30.9 - 2010) Slings (B30.9 - 2010)
Lifting Accessory
BS EN 1492-2:2000+A1:2008* BS EN 14924:2004+A1:2008*
BS EN 1492-4:2004+A1:2008*
BS EN 14924:2004+A1:2008*
6 Monthly
Lifting Accessory 6 Monthly
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price. Page 14
Document reference: LEEA 060, version 1, dated Jan 2015
Generic Product Type
Designation
Bow Shackle
Description Designed for enabling 2 or more pieces of equipment to be joined together without crowding the crown of the shackle. Two main types – screw pin and bolt nut and split pin.
Product /Manufacture Standards AS 2741-2002/Amdt 2-2008 Below-the-Hook Lifting Devices (B30.20 - 2013) BS 3551:1962 BS EN 13889:2003+A1:2008* ISO/NP 2415 RR C 271 Revision D (Collection) AS 2741-2002/Amdt 2-2008 Below-the-Hook Lifting Devices (B30.20 - 2013)
Dee Shackle
Designed to enable connection of 2 pieces of equipment in a straight line.
BS 3551:1962*
Inspection / Maintenance Standards AS 2741-2002/Amdt 22008 Below-the-Hook Lifting Devices (B30.20 2013) ASME B30.26:2010
Periodicity of Examination
Lifting Accessory 6 Monthly
ISO/NP 2415 RR C 271 Revision D (Collection) AS 2741-2002/Amdt 22008 Below-the-Hook Lifting Devices (B30.20 2013)
Lifting Accessory
ASME B30.26:2010 BS EN 13889:2003+A1:2008*
6 Monthly ISO 2415:2004
ISO 2415:2004 RR C 271 Revision D (Collection)
RR C 271 Revision D (Collection)
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price.
Page 15
Generic Product Type
Designation
Description
Eye Bolt
Designed to be fitted to a piece of equipment and act as a lifting point attachment to allow it to be raised, lowered or suspended. 3 main types: Dynamo, collar, eyebolt with link.
Product /Manufacture Standards AS 2317-1998 Forged Eyebolts (B18.15 1985) Below-the-Hook Lifting Devices (B30.20 - 2013) BS 4278:1984* BS EN ISO 3266:2010* ISO 3266:2010
Lifting / Spreader Beam
Plate Lifting Clamp
Usually designed for a specific purpose or as general purpose beams for a range of specified lifts. Used mainly in the steel fabrication industry for attaching to plate metals allowing them to be manoeuvred.
Inspection / Maintenance Standards
Periodicity of Examination
AS 2317-1998 Forged Eyebolts (B18.15 - 1985) Below-the-Hook Lifting Devices (B30.20 2013)
Lifting Accessory 6 Monthly
BS 4278:1984* BS EN ISO 3266:2010* AS 4991-2004
AS 4991-2004 Below-the-Hook Lifting Devices (B30.20 - 2013)
Below-the-Hook Lifting Devices (B30.20 2013)
Lifting Accessory 6 Monthly
BS EN 13155:2003+A2:2009*
Below-the-Hook Lifting Devices (B30.20 - 2013) BS EN 13155:2003+A2:2009*
BS EN 13155:2003+A2:2009* Below-the-Hook Lifting Devices (B30.20 2013) BS EN 13155:2003+A2:2009*
Lifting Accessory 6 Monthly
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price. Page 16
Document reference: LEEA 060, version 1, dated Jan 2015
Generic Product Type
Designation
Description
Rigging Screws and Turnbuckles
Generally used to facilitate tensioning and fine adjustment of length in lifting assemblies where chain, wire rope or textile elements form the main component of the assembly. Also used for cargo restraint and suspension etc.
Barrel Lifters
A specialised lifting accessory which, when used with a lifting machine will lift a barrel and manipulate it whilst suspended (If fitted with the correct mechanism).
Product /Manufacture Standards
Inspection / Maintenance Standards
Periodicity of Examination
AS 2319-2001
AS 2319-2001
Lifting Accessory
BS 4429:1987*
BS 4429:1987*
Below-the-Hook Lifting Devices (B30.20 - 2013)
Below-the-Hook Lifting Devices (B30.20 2013)
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price.
6 Monthly
Lifting Accessory 6 Monthly
Page 17
Generic Product Type
Designation
Description
Crane Forks
A device used in conjunction with a crane or other lifting machine to lift palletised loads of the type more normally associated with fork lift trucks
C-Hook
Magnetic Lifter
Lifting accessory in the shape of a letter C. Generally used for lifting hollow loads, coils, pipes etc Designed to lift specific magnetic materials. Not usually designed for general lifting. Four main types: Battery lifting magnets, Mains fed electric lifting magnet, Permanent lifting magnet, Electro permanent lifting magnet
Product /Manufacture Standards
AS 4991-2004 Below-the-Hook Lifting Devices (B30.20 - 2013) BS EN 13155:2003+A2:2009*
Inspection / Maintenance Standards
Periodicity of Examination
AS 4991-2004 Below-the-Hook Lifting Devices (B30.20 2013)
Lifting Accessory 6 Monthly
BS EN 13155:2003+A2:2009* Hooks (B30.10 - 2009)
Hooks (B30.10 - 2009) Below-the-Hook Lifting Devices (B30.20 - 2013)
Below-the-Hook Lifting Devices (B30.20 2013)
Lifting Accessory 6 Monthly
BS EN 13155:2003+A2:2009*
BS EN 13155:2003+A2:2009*
AS 4991-2004 AS 4991-2004 Below-the-Hook Lifting Devices (B30.20 - 2013)
Below-the-Hook Lifting Devices (B30.20 2013)
Lifting Accessory 6 Monthly
BS EN 13155:2003+A2:2009*
BS EN 13155:2003+A2:2009*
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price. Page 18
Document reference: LEEA 060, version 1, dated Jan 2015
Generic Product Type
Designation
Vacuum Lifter
Description
Uses a vacuum to lift a specific load. Not usually designed for general lifting. Four main types: Self actuating, Mechanically pumped, Venturi and Turbine.
Product /Manufacture Standards
AS 4991-2004 Below-the-Hook Lifting Devices (B30.20 - 2013) BS EN 13155:2003+A2:2009*
Inspection / Maintenance Standards
Periodicity of Examination
AS 4991-2004 Below-the-Hook Lifting Devices (B30.20 2013)
Lifting Accessory 6 Monthly
BS EN 13155:2003+A2:2009*
*British Standards are available to LEEA members via the Association’s Office at a discount of 15% off the BSI non-members price.
Page 19