Mahesh Pandit Updated Cv 09.01.2021

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected],

CURRICULUM VITAE Position

RCM , SPREAD IN-CHARGE, QA/QC Manager

Name

MAHESH PANDIT

Nationality

INDIAN

Date of Birth

15-02-1978

Country of Birth

INDIA

Current Location

Rajasthan, INDIA

Age

43 YEARS

Marital Status

MARRIED

Educational Qualifications: Graduate in Mechanical Engineering Professional Qualifications:  ASNT NDT LEVEL –III in  Radiographic testing  Ultrasonic testing  Magnetic particle testing  Liquid penetrant testing  ASNT NDT LEVEL –II in

VISUAL TESTING EDDY CURRENT TESTING PHASED ARRAY ULTRASONIC TESTING TIME OF FLIGHT DIFFRACTION  BARC RT L-I / L-II  DIPLOMA IN INFORMATION MANAGEMENT SYSTEM FROM APTECH COMPUTER

EDUCATION CENTER

Key skills:

Diversified exposure on various works such as execution of project management. Handling all construction activities including providing technical inputs for methodologies of construction & coordination with site management activities. Interacting with Site Purchasers and Suppliers for achieving cost effective purchase of equipment, accessories, material with timely delivery so as to minimize project cost. Coordinating with sub-contractors; monitor their performance in view of project schedule. Assist in settling all techno-commercial disputes / clarifications during execution of project. NDT inspection of welding, casting, forging, having vast experience for the inspection of cross country pipe line covering inspection of incoming materials, witnessing PQT, WQT, EQT, Destructive testing, hardness, PWHT, Holiday detection, welding, Review of RT films etc. Knowledge of Advanced NDE such as PAUT/TOFD/AUT data interpretation, extensive work experience to identify priorities and resolve problems and needs, Strong 1

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected], interpersonal skills and attention to detail, Ability to manage self and multi-task, demonstrated skill in use of Microsoft Office. Strong practical knowledge for the execution of cross country pipe line. Maintaining quality and safety for the various pipeline activities such as welding, NDE, Joint coating, Trenching, lowering, duct laying/testing, OFC blowing, Marker installation, Hydrostatic Testing etc. Review of Isometric drawing, GADs and BOQ etc. Excellent hand experience in the field of Quality Assurance and Quality control during fabrication and operational in the field of Oil and Gas, Refinery, Petrochemicals etc. Working knowledge of comprehensive work phases from engineering, procurement, construction, and turn over. Familiar with construction practices procedures, scheduling and documentation. Good command in oral and English communication, strong interpersonal skill and ability in multi task. Languages: (English – indicate if fluent in speaking / reading / writing) Countries of Work Experience: Current Company Total Years of Exp. Passport No.

Hindi/ English ( Reading, writing and speaking)

India, Saudi Arabia, UAE JSIW Infrastructure Pvt. Ltd. 20 + J2190039

Years with Current Firm

Years of Experience in QA/QC Mgr. and Execution Validity

2019

10 + Expired in Sep 2020

I have over twenty years extensive experience including six (6) years of gulf experience in oil and gas field, Refinery, Power plant, Casting Foundry, Tanks, pressure vessels etc. during which I have improved my knack in developing QA/QC procedures, NDE technique, Interpretation & evaluation of radiographs, specialized in the interpretation of PAUT/TOFD/AUT data (Using Tomo view /Omni scan, Pipe wizard software), execution of cross country pipe line maintaining full quality and safety works for various diameter and pipe wall thickness within a specified time frame. I have solid experience in destructive testing. Extensive background in completion of Engineering projects, leading skilled Crew. Experienced in timely completion of projects, following Drawing, Technical Specifications & Standards. Responsible overall for all Quality Assurance and Quality Control activities associated with Engineering, Procurement, Construction, Welding, NDT, joint Coating, Painting, Trenching, lowering, duct laying, Duct testing, OFC blowing, Back- filling and Hydro testing, pneumatic test, Internal Auditing, Vendor Inspections, Final Handover Documentation, and Completions. I have also deep knowledge of International Code, Standard like ASME SEC-V, VIII, IX, II Part-A, C & D, API-5L, ANSI B31.1, B31. 3, B 31.4, B 31.8, API- 1104, AWS D1.1, AWS B4.0, ISO-13847/9712/3452, ANSI- Z 49.1, API- 620, 650 & 570 & ASNT NDT Volume-2/4/7/8 /9 /16, Shell DEP, Saudi Aramco Specification (SAEP, SAEC). I have worked with various materials 2

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected], like CS, SS, Alloy steel, Inconel, duplex steel, Cast, forged material. I have been approved by ADCO, GASCO, ARAMCO/GIGL/EIL as Spread In-charge, Sr. QA/QC Manager /Engineer, NDT LIII, PAUT/TOFD/AUT data Interpreter, RTFI, NDE Supervisor/coordinator, NDT Manager etc. With this said, I am confident that I can be a great addition to the company. WORK Experience Period 22 September 2019 to continue

Company

M/S JSIW Infrastructure Pvt. Ltd.

Position, Project Experience* & Description: Responsibility Spread In-charge cum QA/QC Manager at Section-III in MBPL Project, India.  Kick off meeting with sub-contractor prior to start the activity in order to get knowledge for their resources and documents pertaining to the equipment, man power, to be utilized at site for providing maximum production in short duration by maintain quality and zero hazards.  Providing technical leadership and guidance to all staff engaged on the project.  Aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable regulatory requirements.  Handling all construction activities including providing technical inputs for methodologies of construction & coordination with site management activities.  Interacting with Site Purchasers and Suppliers for achieving cost effective purchase of equipment, accessories, material with timely delivery so as to minimize project cost.  Coordinating with sub-contractors; monitor their performance in view of project schedule. Assist in settling all techno-commercial disputes / clarifications during execution of project.  Review and approval of PIMS reports.  Preparing, reviewing of Quality Manuals, Project Quality Plans, Procedures, Work Instructions, Safety & Health Manuals for projects in accordance with ISO 9001:2000 standards, International Codes, and compliance to client specifications and contract requirements.  Conduct audits/surveillances on mechanical activity in compliance to contract, Project Quality Plan, Project Engineering Procedures/Manuals and Project Work Instructions  Providing NDE training for NDT/QC personnel.  Calculation and evaluation of Hydrostatic Testing activity.

3

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected],

November 2018 to 18 September 2019

M/S KALPATARU POWER TRANSMISSION LTD.

QA/QC Manager BAPL Project, India. Responsibility  Providing technical leadership and guidance to all staff engaged on the project.  Aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable regulatory requirements.  Handling all construction activities including providing technical inputs for methodologies of construction & coordination with site management activities.  Interacting with Site Purchasers and Suppliers for achieving cost effective purchase of equipment, accessories, material with timely delivery so as to minimize project cost.  Coordinating with sub-contractors; monitor their performance in view of project schedule. Assist in settling all techno-commercial disputes / clarifications during execution of project.  Review and approval of PIMS reports.  Verify that NDE, welding and other pipeline/Piping activity have been correctly performed according to the approved procedures, WPS, Alignment sheet, Isometric drawing and client specifications.  Interpret & evaluate results of Non Destructive tests (Radiography Film Interpretation/MUT/MPI/PT/VT) & advance NDT (AUT, PAUT, and TOFD) according to the applicable standards, codes and/or specifications to ensure eventual issues are promptly addressed.  Root cause analysis and implementation of corrective action for process related concerns.  Providing technical leadership to QA/QC engineers.  Oversee all safety aspects of day-to-day NDT operations.  Qualifying of NDE personnel after demonstration and examination.  Conduct preconstruction meetings with new and existing NDT/Welding/Fabrication subcontractors at least two weeks prior to the start of each new phase of the work to discuss issues that affect quality. Document these meetings in the daily QC report.  Closing NCR raised by Client.  Preparation and review of internal punch list and clearance inspection during fabrication.  Witness for Hydrostatic and Pneumatic leak tests of pressurized components.  Review of Isometric drawing, GADs, BOQ etc.  Inspection and execution of Marker installation, Cased crossing, HDD etc. 4

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected],

November 2016 to May 2018

1 May 2015 to 20 June 2016

M/S Consolidated Contracting Company

M/S Dodsal Engineering & Construction Pvt. Ltd

Sr. QA/QC Engineer (NDT L-III) at IGD-E project, Phase-1, package- 3, Habshan-5 in Abu Dhabi, UAE. Responsibility  Interpret & evaluate results of Non Destructive tests (Radiography Film Interpretation/MUT/MPI/PT/VT) & advance NDT (AUT, PAUT, and TOFD) according to the applicable standards, codes and/or specifications to ensure eventual issues are promptly addressed.  Root cause analysis and implementation of corrective action for process related concerns.  Witnessed and validate over 50 demonstrations with RT on defective weld blocks by using PAUT/TOFD/AUT equipment in various projects from 4” pipe diameter to 48” pipe diameter and wall thickness 6 mm to 53 mm.  Implement NDT procedures as laid out in Technical Procedure Manual and industry standards.  Providing technical leadership to NDT/welding/Joint coating operations, including preparation and review of NDT procedures, WPS and reports.  Oversee all safety aspects of day-to-day NDT operations.  Maintain personnel expertise and formal certification in the appropriate NDT disciplines.  Establishing NDT techniques and procedures in support of client requirements and interpreting codes and standards.  Oversee Written Practice and Certification programs.  Works with and provides training for NDT inspectors in techniques of NDT inspection and other related duties. NDT L-III at Abu Dhabi in UAE under witnessing of ADCO Responsibility  Review documentation to ensure that all previous operations have been completed prior to NDT as required.  Provide NDT training and encouragement to new NDT employees to support their involvement in the operations.  Qualifying of NDE personnel after demonstration and examination.  Preparation/review and witnessing of all NDE and PWHT procedures (RT/UT/MT/PT/PAUT/TOFD/AUT/PMI/HT/FT/Radiation Safety procedure/Task Risk Assessment and PWHT/WPS.  Ensure approval status of an NDE service provider.  Conducting monthly internal audits to improve better quality.

5

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected],

July 2014 to March 2015

M/S GS E&C Pvt. Ltd.

 Raising RFI for NDE activities.  Implement NDT procedures as laid out in Technical Procedure Manual and industry standards.  Oversee supervision of all visual inspections and NDE, including third party subcontractors.  Review daily/weekly/monthly NDT/welding progress reports, welder performance, and Weekly rejection rate and submit to Client.  Review of Isometric drawing for its proper NDE coverage and appropriate selection of WPS.  Attending weekly meeting to mitigate the NDE backlog to zero with NDE Subcontractor  Liaise with the welding Forman, engineers, construction, and QC manager to take corrective action to minimize percentage of weld repair and how to increase the progress.  Monitor inventory and serviceability of all NDT& welding equipment’s.  Maintain the correct level of consumable stock level  Verify and ensure that test results submitted are accurate and reliable.  Attending weekly meeting to mitigate the NDE backlog to zero with NDE Subcontractor. NDT L-III in Saudi Arabia under Aramco Overseas Company B.V. and Sumitomo Chemical Co. LTD at Rabigh Phase-II Petrochemical Project in KSA. Responsibility  Lead a team of inspectors and provide supervision, troubleshooting and recommend.  Establishing, implementing and maintaining the quality management system.  Review daily, weekly and monthly progress reports and site inspection for weld visual, NDT, weld repair.  Report the overall quality performances of the company to management and make recommendations to improve and initiate those recommendations.  Providing technical leadership to NDT operations, including review of NDT reports  Oversee all safety aspects of day-to-day NDT operations.  Understanding and resolving Customer’s technical requirements.  Maintain personnel expertise and formal certification in the appropriate NDT disciplines. Review documentation to ensure that all previous operations have been completed prior to NDT as required.  Provide NDT training and encouragement to new NDT employees to support their involvement in the 6

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected],

December 2012 to December 2013

M/S DayimPunj Lloyds Contracting Company Ltd.

January 2010 to November 2012

M/S Corrtech International PVT LTD.

operations.  Qualifying of NDE personnel after demonstration and examination.  Review of Radiation Safety procedure.  Ensure approval status of an NDE service provider and all QC inspectors involved into the project.  Interpret & evaluate results of Non-Destructive tests (Radiography Film Interpretation/MUT/MPI/PT/VT). NDT L-III in Saudi Arabia at YASREF Project, Yanbu in Saudi Arabia. Responsibility  Interpret & evaluate results of Non Destructive tests (Radiography Film Interpretation/MUT/MPI/PT/VT).  Providing technical leadership to NDT/welding/Joint coating operations, including preparation and review of NDT procedures, WPS and reports.  Oversee all safety aspects of day-to-day NDT operations.  Qualifying of NDE personnel after demonstration and examination.  Ensure approval status of an NDE service provider.  Conducting monthly internal audits to improve better quality.  Raising RFI for NDE activities.  Verify and ensure that test results submitted are accurate and reliable  Ensure the availability of NDT /Welding instruments and its consumables. Dy. QA/ QC Manager Responsibility  Interpret & evaluate results of Non Destructive tests (Radiography Film Interpretation/ MUT/MPI/PT/VT).  Root cause analysis and implementation of corrective action for process related concerns.  Providing technical leadership to NDT/welding/Joint coating operations, including preparation and review of NDT procedures, WPS and reports.  Oversee all safety aspects of day -to- day NDT operations.  Planning duties within the QA/QC staff and related work schedules.  Oversee supervision of all visual inspections and NDE, including third party subcontractors.  Identify and develop solutions to correct 7

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected],









 

inspection function deficiencies. Witnessing of destructive test like Tensile, Impact, Hardness, Macro/Micro, Root/Face bend, SSC, SOHIC for PQT and WQT as per ISO -13847 and ASME Sec-IX standard. Witnessing for WQT, EQT, PQR, Joint coating, marker fabrication asper approved WPS & procedures. Preparation & review of ITP, WPS, WQTR, EQTR, Welder ID Card and QCP for welding, 3LPP, 3LPE, FBE Coating for pipeline. Review daily/weekly/ monthly NDT/welding progress reports, welder performance, and Weekly rejection rate and submit to Client. Root cause analysis and implementation of correct ive action for process related concerns. Check calibration of measurement instruments and related certifications. Attending weekly meeting to mitigate the NDE backlog to zero with NDE Subcontractor.

 Final test pack review Hydrostatic leak testing.

for

clearance

of

 Ensure the piping systems is fabricated and tested as per AFC drawing and specification.  Ensure that no leakage is observed during pressure test other than that caused due to temperature variations.  Ensure that oxygen contents should not be more than as required by the specification for acceptance of nitrogen purging during precommissioning.

8

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected],

NDT Site In-charge Responsibility  Review NDE personnel CVs, Interview and acceptance before sending f or Client interview or approval and Keep NDE personnel CVs and Certificates for future review by Client. December 2005 to December 2009

M/S Sievert India Pvt. Ltd.

 Monitor inventory and serviceabilityof all NDT equipment.  Maintain the correct level of consumable stock level  Verify and ensure that test results sub mitted are accurate and reliable  Monitor the performance of technicians.  Monitor the radioactive devices for any radiation leakage. Inspect the radioactive devices for safe operation troubleshooting and recommend.  Providing technical leadership to NDT operations, including review of NDT reports  Oversee all safety aspects of day -to- day NDT operations.  Understanding and resolving Customer’s technical requirements.  Maintain personnel expertise and formal certi fication in the appropriate NDT disciplines.  Constantly explore and seek better ways and more efficient methods of allowing the business to perform NDT in the most optimal manner.  Establishing NDT techniques and procedures in support of client requirements and interpreting codes and standards.  Oversee W ritten Practice and Certification programs.  Works with and provides training for NDT inspectors in techniques of NDT inspection and other related duties.  Review documentation to ensure that all previous operations have been completed 9

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected], prior to NDT as required.  Provide NDT t raining and encouragement to new NDT employees to support their involvement in the operations.  Qualifying of NDE personnel after demonstration and examination.  Review of Radiation Safety procedure.  Ability to take the cost effective measures to reduce overall package costs by maintaining quality, safety with production.  Attending weekly meeting to mitigate the NDE backlog to zero with client.  Witness of bubble test by using vacuum box technique in oil storage tanks. NDT Engineer/Site In- charge at various site in India. Responsibility  Perform Radiography Testing using Ir-192, Co-60 source & X-ray machine for different types of joints. June 2001 to M/S INJO Nov. 2005 Technical Services  Performed Ultrasonic Testing of casting, Forging, plate, welding of butt joints, nozzles & MT of pressure vessels, piping, structure, casting, by fluorescent/non fluorescent, wet and dry method. PT of various types of weld joints in the field of refinery, petrochemical plant, Tubular Heat Exchanger, Hydro Power plant, gas, and oil pipeline projects.  Interpret & evaluate results of Non Destructive tests (Radiography Film Interpretation/MUT/MPI/PT/VT).

M/S Rajendra

August 1999 Mechanical to May 2001 Industries Ltd.

QC (NDT Technician) Responsibility Perform Radiography Testing using Ir-192 and X-ray machine for butt weld joints. Interpret & evaluate results of Non Destructive tests (Radiography Film Interpretation/MPI/PT/VT). Inspection of pipe tubes for dimension, thickness, pitting, dents etc.

10

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected],

Trainings and Seminars Attended HSE AWARENESS: Aware of ARAMCO, ADCO HSE requirement, participated in HSE meetings and compliance of HSE standard in work activity, conducted Tool Box Talk for NDE, welding activity. HSE TRAINING      

HSE Induction Working at Height Heat Stress Safety for Supervisor Permit to work Confined Space Training 

NDT TRAINING    

PAUT TOFD NDT of Aero engine components Infrared Thermography 

Pipeline Projects undertaken MBPL Project , Phase-II , Section-III, Jaipur Bokaro Angul Pipeline Project (BAPL), Ramgarh, Jharkhand

30” X 10.8/13/15.5/19.4 mm wall thick x length 151 KM 30” x 12.5/14.8/18.5 mm wall thickness, 121.5 Km High Pressure Onshore Gas Pipeline.

IGD-E (Phase-1) Package-3, Onshore Pipeline Project, Habsan-5, Abu Dhabi, UAE.

42” x 31.75/37.77 mm Thick.; 113.467 Km High Pressure Onshore Gas Pipeline 6” x 6.35/7.11 mm wall thickness ; 16.5 Km Condensate Pipeline

NEB-III Project, Rumaitha, Abu Dhabi, UAE.

375 KM pipelines including network lines of various wall thickness and diameter of X-60/65 MATERIALS. Diameter ranging from 3” to 26” NPS.

YASREF PROJECT, Yanbu, Kingdom of Saudi Arabia

36” X 9.53 mm wall Thickness; 1.93 Km Diesel Export pipeline

YASREF PROJECT, Yanbu, Kingdom of Saudi Arabia

36” X 9.53 mm wall Thickness ; 1.93 Km Gasoline pipeline

YASREF PROJECT, Yanbu, Kingdom of Saudi Arabia

36” X 9.53 mm wall Thickness ; 06.98 Km Crude oil pipe line 11

Spread In-charge /Quality Manager (ASNT NDT L-III in RT, UT, MT, PT) Contact: +91-7091035153 Skype ID: mahesh.pandit78, Email: [email protected]; [email protected], YASREF PROJECT, Yanbu, Kingdom of Saudi Arabia

12” X 9.53 mm wall Thickness ; 01.93 Km Benzene pipeline

YASREF PROJECT, Yanbu, Kingdom of Saudi Arabia

24” X 7.14 mm wall Thickness ; 01.92 Km Gasoline pipeline

TPPL Project Raibareli,

18” Diameter 102 Km

SKPG Project, Baroda,

06” Diameter 30 Km

DVPL-II,Godhra, BNPL-II,Sirhind,

48” Diameter 125 Km. 30” Diameter 145 Km.

DTPL Project, Nadiad

12” Diameter 44 Km

Others project     

Jsons Foundary Pvt Ltd. – Casting steel manufacturers at Sangli in India TEMA INDIA Ltd- Heat Exchanger manufacturer-india Reliance Industries Ltd-Jamnagar- Refinery project Essar India Ltd- Refinery project ADNOC-Mechanical works for Habsan-5 & Habsan complex-Gas Processing plant-IGD-E, UAE.

I declare that above statements are correct to the best of my knowledge & belief. Yours truly,

Mahesh Pandit Spread In-charge / QA-QC Manager

12