Slovenian Defence Products 2010-2017

Slovenian Defence Products

GOIS Slovenian Defence Industry Cluster Dimičeva 13, SI-1504 Ljubljana, Slovenia T: + 386 1 5898 423, F: + 386 1 5898 400 El: [email protected], W: http://giz-gois.si

Slovenian Defence Products

GOIS Slovenian Defence Industry Cluster Dimičeva 13, SI-1504 Ljubljana, Slovenia T: + 386 1 5898 423, F: + 386 1 5898 400 El: [email protected], W: http://giz-gois.si

Ministry of Defence Republic od Slovenia www.mors.si

Photographs: Bruno Toič and Emil Jalovec, MORS

FOREWORD

AN INDUSTRIAL TRADITION, QUALITY AND INNOVATION Slovenia has a long industrial tradition. An export orientation, investments in new technologies and the implementation of international standards have all shaped Slovenian industry in the last few decades. The country’s main export markets are the EU, SouthEast Europe and other world markets. The production of military weapons and equipment is part of a tradition lasting several hundred years in the territory of Slovenia. The well-renowned Slovenian precision and craftsmanship are reflected in Slovenian defence products that are distinguished by the inclusion of their own know-how, quality, innovation, compliance with international standards and optimal performance-to-cost ratio. This industrial tradition, quality and innovation are built into all of our products and services. Since joining NATO in 2004, interoperability and compliance with NATO standards have become the guiding principle of the development of new defence production programs in Slovenia. The cooperation of enterprises with research institutes and Slovenian universities has also expanded significantly. The Slovenian defence industry supplies the following wide range of products and services: • Optoelectronic equipment • Fire control systems • Light armored vehicles, special vehicles and their parts • Personal equipment for soldiers • Telecommunications equipment • Simulation and training equipment • Information technologies • Logistical equipment • Parts for heavy weapons • Parts and components for machines • Special steels • R&D and new technologies

Certain legal provisions bind foreign suppliers to enter into an agreement on industrial participation involving supplies to the Ministry of Defence of Slovenia. The Government of Slovenia has issued »Directives for Offset Programs« that defines the policy concerning offsets in Slovenia. The amount of the offset obligation is, as a rule, determined as 100% of the contract value. Bidders are requested to submit offset programs for supplies exceeding €400,000. In Slovenia trading in defence equipment is regulated by the Law on Defence and other legal acts requiring the producers of military weapons and equipment to become registered with the Ministry of Defence of the Republic of Slovenia. There are several ways potential customers can contact the Slovenian producers of defence equipment, including direct contact with individual companies. This publication was prepared by the Slovenian Defence Cluster in cooperation with the Chamber of Commerce and Industry of Slovenia and the Ministry of Defence of Slovenia. It represents Slovenian companies which provide high quality products and services in the areas of defence, security and protection.

You can obtain more information about the Slovenian defence industry from: GOIS Slovenian Defence Industry Cluster Dimičeva 13 SI-1504 Ljubljana Slovenia T: + 386 1 5898 423 F: + 386 1 5898 400 El: [email protected] W: http://giz-gois.si

1

CONTENts (PRODUCT, SERVICES)

Products and services

Company

Page

1. Weapons and Weapon Parts

SISTEMSKA TEHNIKA ARMAS d.o.o.

46

2. Fire Control Systems

FOTONA d.d.

21

S&T SLOVENIJA d.d.

40

3. Ammunition and Explosives

AREX d.o.o.

4. Light Armoured Vehicles and Off road Vehicles

SISTEMSKA TEHNIKA ARMAS d.o.o.

46

5. Command and Control Systems

ISKRA SISTEMI d.d.

31

S&T SLOVENIJA d.d.

40

ISKRA SISTEMI d.d.

31

ISKRATELING, d.o.o.

32

TRIVAL ANTENE d.o.o

50

7. Opto-Electronic Equipment

FOTONA d.d.

21

8. Electric Wire, Power and Distribution Systems

TRIVAL ANTENE d.o.o

50

9. Ballistic Protection

VEPLAS d.d.

51

10. Demining Equipment

SISTEMSKA TEHNIKA ARMAS d.o.o.

46

11. Electric and Electronic Equipment Components

DOMEL d.d.

13

12. Observing and Surveilance Systems

DAT-CON d.o.o.

11

13. Emergency and Rescue Equipment

DAT-CON d.o.o.

11

IKOR-B d.o.o.

28

P TEAM d.o.o.

39

SAVATECH d.o.o.

42

14. Alarm and Signal Systems

THYIA TECHNOLOGIES d.o.o.

48

15. Military Footware

ALPINA d.d.

7

16. Special Purpose Vehicles

BIJOL d.o.o.

9

17. Shelters, Tents, Logistics

IKOR - B d.o.o.

28

SAVATECH d.o.o.

42

18. Training Aids and Devices

EM. TRONIC d.o.o.

17

19. Simulators

LOGON d.o.o.

35

GUARDIARIS d.o.o.

25

S&T SLOVENIJA d.d.

40

DOMEL d.d.

13

THYIA TECHNOLOGIES d.o.o.

48

21. Chemical Biological, Nuclear protection (CBRN)

EM. TRONIC d.o.o.

17

22. Explosives management, storage, testing and disposal

IZOP, d.o.o.

34

23. Equipment for propellants production

GOSTOL-GOPAN, d.o.o.

24

24. Water filtration

VIMAR, d.o.o.

53

25. Safes, secure cabinets and rooms

PRIMAT, d.o.o.

37

26. Tools

EMO ORODJARNA d.o.o

15

27. Mechanic and electric parts and components

HYGAL, d.o.o.

27

ISKRA KONDENZATORJI, D.O.O.

30

6. Telecommunications Equipment

20. R&D, New technologies

28. Special steels

2

ACRONI, d.d.

8

6

CONTENTS (LIST OF COMPANIES)

Acroni d.o.o. Cesta Borisa Kidriča 44 SI-4270 Jesenice

Alpina, d.d., Žiri Strojarska2 SI-4226 Žiri

Arex d.o.o. Trubarjeva 7 SI- 8310 Šentjernej

BIJOL d.o.o. Livarska cesta 17 SI-2367 Vuzenica

Dat-Con d.o.o. Polzela 136a SI-3313 Polzela

Domel d.d. Otoki 21 SI-4228 Železniki

EMO – ORODJARNA proizvodna družba d.o.o. Bežigrajska cesta 10 SI-3000 Celje

em.tronic d.o.o., projektiranje razvoj in proizvodnja elektromehanskih sistemov Počehova 12 SI-2000 Maribor

Fotona d.d. Stegne 7 SI-1210 Ljubljana

Gostol-Gopan d.o.o. Prvomajska 37 SI-5000 Nova Gorica

Guardiaris defense simulations ZootFly d.o.o. group Knezov stradon 94 SI-1000 Ljubljana

T: +386 4 58 41 000 F: +386 4 58 41 111 E: [email protected] W: www.acroni.si

6

T: +386 4 51 58 000 F: +386 4 51 58 370 E: [email protected] W: www.alpina.si

7

T: +386 7 39 33 475 F: +386 7 39 33 451 E: [email protected] W: www.arex.si

8

T: +386 2 8790 156, +386 2 8790 157 F: +386 2 8790 158, M: 386 41 614 345 E: [email protected] W: www.bijol.si

9

T: +386 5 907 18 52 F: +386 35720 408 W: www.dat-con.com

11

T: +38645117101 F: +38645117106 E: [email protected] W: www.domel.si

13

T: +386 3 42 82 100 F: +386 3 42 82 101 M: [email protected] W: www.emo-orodjarna.com

15

T: +386 2 4502028 F: +386 2 4502020 E: [email protected] W: www.em-tronic.si

17

T: +386 1 5009 100 F: +386 1 5009 200 E: [email protected] W: www.fotona.com

21

T: +386 5 330 71 00 F: + 386 5 330 71 03 E: [email protected] W: www.gostol.eu

24

T: +386 1 428 73 41 F: +386 1 428 73 42 E: [email protected] W: www.guardiaris.com

25

3

CONTENts (LIST OF COMPANIES)

Hygal d.o.o.

27

Mariborska cesta 143 Sl-2370 Dravograd

IKOR-B d.o.o.

28

Šujica 74, SI-1356 Dobrova pri Ljubljani

Iskra Kondenzatorji, d. d.

30

Vajdova ulica 71 SI-8333 Semič

Iskra Sistemi, d.d.

31

Stegne 21 SI-1000 Ljubljana

Iskrateling d.o.o.

32

Ljubljanska c. 24a SI-4000 Kranj

IZOP d.o.o.

34

Topniška ulica 29 SI-1000 Ljubjana

Logon d.o.o.

35

Tehnološki park 24 SI-1000 Ljubljana

PRIMAT tovarna kovinske opreme d.d.

37

Industrijska ulica 22 SI-2000 Maribor

P TEAM d.o.o.

39

Log, Pot na Ferjanko 1 SI-1351 Brezovica

S&T Slovenija d.d.

40

Leskoškova cesta 6 SI-1000 Ljubljana

SAVATECH d.o.o.

Programme EKO Environmental Protection Products Programme

42

Škofjeloška c. 6 SI-4000 Kranj 4

T: +386 2/8710-050 F: +386 2/8710-051 E: [email protected] W: www.hygal.si T: +386 1 36 41 260 F: +386 1 36 42 265 E: [email protected] W: www.ikor-b.si T: +386 7 38 49 200 F: +386 7 30 67 110 E: [email protected] W: www.iskra-semic.si T: +386 1 513 10 00 F: +386 1 511 15 32 E: [email protected] W: www.iskrasistemi.si T: +386 4 20 76 276 F: +386 4 20 76 277 E: [email protected] W: www.iskrateling.si T: +386 1 43 79 472 F: +386 1 43 79 473 E: [email protected] W: www.izop.si T: +386 1 565 50 68 F: +386 1 565 50 69 E: [email protected] W: www.logon.si T: +386 2 25 07 610 F: +386 2 25 22 689 E: [email protected] W: www.primat.si T: +386 1 563 1033 F: +386 1 563 1034 E: [email protected] T: +386 1 5855 200 F: +386 1 5855 201 E: [email protected] W: www.snt.si T: +386 4 2066 385 F: +386 4 2066 390 W: www.sava.si

CONTENTS (LIST OF COMPANIES)

Sistemska tehnika Armas, d.o.o. Koroška cesta 14 SI-2390 Ravne na Koroškem

THYIA d.o.o. Dimičeva 9 SI-1000 Ljubljana

TRival antene d.o.o. Bakovnik 3 SI-1241 Kamnik

Veplas d.d. Cesta Simona Blatnika 11 SI-3320 Velenje

Vimar d.o.o. Mednarodni prehod 6 SI-5290 Sempeter pri Gorici

T: +386 2 870 77 90 M: +386 51 650 255 F: +386 2 870 76 05 E: [email protected] W: www.st-ravne.si, www.armas.si

46

T: +386 1 28 06 500 F: +386 1 28 06 519 E: [email protected] W: www.thyia.si

48

T: +386 1 831 43 96 F: +386 1 831 33 77 E: [email protected] W: www. trivalantene.si

50

T: +386 3 898 58 00 F: +386 3 898 58 30 E: [email protected] W: www.veplas.si

51

T: +386 40 980 000 F: +386 5 393 2484 E: [email protected] W: www.awt.si

53

5

ACRONI, d.o.o Acroni d.o.o. Cesta Borisa Kidriča 44 4270 Jesenice T: + 386 4 58 41 000 F: + 386 4 58 41 111 E: [email protected] W: www.acroni.si

ACRONI, d.o.o. is a producer of flat rolled stainless, electrical, structural and special steel. We produce hot and cold rolled coils, heavy plates and cold formed profiles. Acroni is part of the holding SIJ d.d. - SLOVENIAN STEEL GROUP. The group is comprised of 15 companies whose products with high added value are appreciated at home as well as all around the world, where they export more than 70% of their products.

Acroni is the largest company in SIJ Group and also the only producer of flat-rolled steel products in Slovenia. Steelmaking has a rich tradition in our region. Iron making developed hundreds of years ago, already in the 14th century. The invention of ferromanganese production in 19th century gave the company a pioneer place in the history of iron. Today, we are a technologically advanced company, where modern steel equipment enables production of the finest steel. Investment activities of production process modernisation and improving quality are ongoing processes in Acroni. We are focusing our production on special niche products, such as quarto stainless plates, quenched and tempered plates and armour plates. Armour steel is used in different applications: • military armoured vehicles and equipment, • shooting gallery devices, • security vans and cars, • doors and walls, • money exchange offices and • bank counters. 6

ALPINA d.d. Alpina, d.d., Žiri Strojarska 2 SI-4226 Žiri T: +386 4 51 58 000 F: + 386 4 51 58 370 E: [email protected] W: www.alpina.si

We at Alpina stay true to the old shoemaker’s saying that it is the foot that determines which way and how far one can walk. This is particularly true in the Alpine environment, where we have been putting our skills to the test for the past sixty years. We continue to devote all our shoemaking passion to the features such as comfort, durability and flexibility. Our wealth of experience in footwear production and development has been applied also to the manufacturing of military boots. We have been supplying the Slovene armed forces with military boots from the

5 1

6

2

7

3

8

4

9

10

Arpenaz

11

12

13

Desert

14

very beginning and have been keeping up with the requirements and trends of a modern military. Systematic testing and high-tech development have enabled us to develop high quality military footwear that meets the strict requirements and trials that a modern military force is subjected to. All models have been developed on the basis of foot measurements carried out on soldiers. Carefully selected materials, anatomically designed footbed, firm rubber sole and protective toe cap insure extreme rigidity and comfort at the same time.

1. Foam 2. Clima control holes 3. Flex zone 4. Leather 2.0-2.2mm 5. Special soft tongue construction 6. Leather lining 1.1mm 7. Speed lacing system 8. Lace stopper 9. Sympatex lining 10. Heel counter 11. Rubber profiled sole 12. PU Shock absorber 13. PU Insole for torsion stability 14. Anatomic footbed 15. Toe cap

15

Desert

Teton

7

AREX D.O.O. Arex d.o.o. Trubarjeva 7 SI- 8310 Šentjernej T: +386 7 39 33 475 F: +386 7 39 33 451 E: [email protected] W: www.arex.si

DEFENCE PROGRAMME plastic blank & drill ammunition

up to calibre 30 x 173 mm

plastic & metal links

M27, M13, M9

special equipment & buckles

www.arex.si oglas vojska A4.indd 1

8

14.3.2008 8:54:10

BIJOL D.O.O. BIJOL d.o.o. Livarska cesta 17 SI-2367 Vuzenica T: +386 2 8790 156, +386 2 8790 157 F: +386 2 8790 158, M: 386 41 614 345 E: [email protected] W: www.bijol.si

Company Bijol d.o.o. was establish in 1996, with the main activity of representing, assembling and servicing cranes of the company Palfinger GmbH. Today the company employs 25 full-time employed workers and some contract workers.

First project for Slovenian army was relatively large, it consisted of assembling 48 container handling systems Palfinger Palift on the trucks Mercedes Benz. This project was followed by number of others such as, purchasing knuckle-boom cranes with baskets for decontamination of vehicles, purchase of special transportable forklifts Palfinger Crayler and also radar systems for which the basics of hydraulic lifting and descending was constructed and manufactured in company Bijol d.o.o.

Headquarter of the company

Company Palfinger with headquarters in Salzburg, Austria is well known manufacturer of lifting-loading equipment. Palfinger’s loading technology is powerful because of its excellent kinematics and geometry of mobility. Palfinger’s products are improved again and again with numerous patents and innovations, so that the company has proven itself and gained an important role as an innovator in the development of lifting techniques. The largest share in the firm’s business have truck mounted knuckle-boom cranes Palfinger and timber and recycling cranes Palfinger Epsilon. The company’s program also consist of tail lifts, aerial work platforms, container handling systems, transportable forklifts, for special transport dedicated trailers and also for the needs of army. Among mentioned Palfinger company, Bijol d.o.o. also represents other companies such as Doll, Exte, Stepa, Huffermann,.. In 2004, the company Bijol d.o.o. gained first bussines for the Slovenian army on the public competition in cooperation with company Dumida d.o.o. Within that year a new assembly-services workshop specifically for projects in the military industry was built. In 2006 the company also renovated other production facilities and built new offices.

PALIFT hook loader on Mercedes-Benz

The cooperation between Slovenian Army and Bijol d.o.o., was not closed with those projects. The company still provides regular services and strojelome. In this year they have entered into the Cluster of Slovenian Army Industry. Company Bijol has relatively large range of activity, so each customer from this technical field can find something suitable. Company`s staff listen to their customers, advise them and offer quick and efficient services.

9

BIJOL D.O.O.

Our references from Military program:

Working basket with Kärcher Decontamination system

PALIFT load handling solutions

Crayler forklift for military applications

Hydraulic system for mobile radar

Recovery vehicle with two winches and three-wheel coupling Loader crane

General representative in Slovenia for:

10

DAT-CON D.O.O. Dat-Con d.o.o. Polzela 136a SI-3313 Polzela T: +386 5 907 18 52 F: +386 35720 408 W: www.dat-con.com

With its specialized military and police equipment, the company Dat-Con d.o.o. has successfully established itself in the European market, and is involved in international projects founded by EU Phare and EBRD programs. Specialized knowhow and experience enable the company to adapt to the customers’ requirements and demands quickly and efficiently. Our knowhow in the field of measurement equipment, combined with the experience in the field of professional audio and video equipment, enabled us to develop efficient solutions for the complex specialized electronics field. The products and devices are applied in video supervision of state borders, road traffic, communication and other systems in security operations.

Dat-Con d.o.o. main building and production hall

land (snow, dirt, desert, off-road...). Hovercraft SR-81 also enhances organization rescue capabilities and provides higher security for personnel. Every Hovercraft SR-81 is custom built to end-user specifications and a wide range of optional equipment is available: - radio station, - thermal camera with pan/tilt and waterproof monitor, - lights for night rescue – reflector, - helmets with built in micro telephone communications ,...

BORDER PATROL SYSTEM BOPAS-03 (flexible portable surveillance system with thermal camera) The system is designed for all surveillance requirements in normal and extreme conditions and provides short and long range observation. It can be used as a Hand Held unit with internal battery or can be integrated with the tripod, pan tilt unit and remote operating console. Pan tilt has high dynamic response and excellent repeatability. TFT high resolution monitor allows full camera control and true on-screen status report.

Our newest product Rescue Hovercraft SR-81 Rescue Hovercraft SR-81 is designed and manufactured to meet the demanding needs of Search&Rescue Organizations. It operates effectively in extreme conditions on water (thin or broken ice, swamp…) and on

11

DAT-CON D.O.O.

Stationary observing systems made by company Dat-Con d.o.o. Surveillance systems can be mounted on different types of towers, buildings and poles in accordance with customer requirements.

Mobile and stationary surveilance systems Surveilance systems can be integrated in different types of vehicles (like vans and allterrain vehicles) or mounted on different types of towers, builings and poles in accordance with customer requirements. We offer special solutions for land and sea observation with long range thermal cameras, nautical radars, complete GPS positioning and navigation system-AIS, VTS in combination with laser range finder. Surveillance systems are equiped with: · Customize electro optical head · Our pan-tilt solution · Our lifting mechanism · Control area for two operators · Software · GIS application with orto-photo · Long range observation up to 40 km · Combination with land and nautical radar · Communication system connected to control centre · Complete power supply autonomy

Mobile border surveillance systems made by company Dat-Con d.o.o.

12

DOMEL D.D. Domel d.d. Otoki 21 SI-4228 Železniki T: +38645117101 F: +38645117106 E: [email protected] W: www.domel.si

SMART AIR DELIVERY SYSTEMS FOR FUEL CELLS BASED ON BRUSHLESS TECHNOLOGY Fuel cell technology gives us the promise of an electrical energy source for the future, based on clean and efficient generation without harmful environmental influences. In order to fulfill Domel’s mission to keep the environment unharmed, special technologies to support demands for oxygen and hydrogen delivery systems in fuel cell applications were developed. Hydrogen and atmospheric oxygen react in the fuel cell with each other. A flexible membrane is the heart of the PEM fuel cell. Here, the vital electro-chemical reaction takes place. Critical to the life time of the

most important parts of fuel cells are oxygen and hydrogen delivery system realized with different blowers and pumps. The main advantage of electronically commutated brushless blower technology is: maintenance free, carbon dust free and spark-free operation combined with high efficiency. The high efficiency helps to increase the overall efficiency of the complete fuel cell system. Domel’s main brushless blower functions are supervised by DSP (digital signal processor) with high accuracy and quick response. Overall it means enhanced flexibility, dynamic, independence from supply voltage oscillation, rapid response, accurate speed control, high performance and a high level of

Smart air delivery systems for fuel cells based on brushless technology

13

DOMEL D.D.

robustness. All of these features are available from Domel’s microprocessor controlled brushless blower, specially developed for fuel cell applications.

Operation principles and product examples

14

For harsh environment conditions a compact blower design is also available. Despite the compact design of brushless blowers, they are sufficiently robust to meet the demanding requirements of fuel cell applications, such as: vibration, gas leakage, condensation and low-noise.

EMO – ORODJARNA proizvodna družba d.o.o. EMO – ORODJARNA proizvodna družba d.o.o. Bežigrajska cesta 10 SI-3000 CELJE T: +386 (0)3 42 82 100 F: +386(0)3 42 82 101 M: [email protected] W: www.emo-orodjarna.com

TOOLFACTORY The trade mark of EMO-Orodjarna - two lions means high quality and capability in satisfying the demands and desires of buyers. Our programme is divided to: 1. transfer tools for transforming sheet metal, 2. progressive tools for transforming sheet metal, 3. individual tools for transforming sheet metal. We employ highly educated specialists which use the most modern techology and software. We are proud to be a strategical partner and vendor specialy in automotive industry. We export to the most demanding markets. Our portfolio beside from customer satisfaction is also constant growth of sales.

15

EMO – ORODJARNA proizvodna družba d.o.o.

LASER ENGINEERED NET SHAPING LENS (Laser Engineered Net ShapingTM) is an additive manufacturing technique for rapidly fabricating, enhancing and repairing metal components directly from CAD data. The technology allows to design a part using standard 3D CAD software and build it directly from one or more of about 76 alloy powders including steel, titanium, nickel, aluminum, copper, and metal matrix composites. LENS offers four technical advantages: fabrication of hollow or embedded structures, computer controlled gradient deposition of multiple materials in one part, material properties comparable to investment castings out of the machine or close to wrought materials after heat treating, and a small heat affected zone. LENS is used in machine engineering (for repairing and renewal of most demanding component parts of contemporary tools and mechanical elements), airspace, military, electro, car and in other industry e.g. to medicine (surgical instruments and prosthetic implants).

LASER HARDENING Laser hardening is a metal surface treatment process complementary to conventional flame and induction hardening processes. A high-power laser beam is used to heat a metal surface rapidly and selectively to produce hardened case depths of up to 1.5 mm with hardness values of to 65 HRc.The high hardness of the martensitic micro-structure provides improved properties such as wear resistance and increasedstrength. TIC - LENS laserske tehnologije, d.o.o. www.tic-lens.com

16

EM.TRONIC D.O.O. em.tronic d.o.o., projektiranje razvoj in proizvodnja elektromehanskih sistemov Počehova 12 SI-2000 Maribor T: +386 2 4502028 F: +386 2 4502020 E: [email protected] W: www.em-tronic.si

INTEGRATED CBRN RECONNAISSANCE SYSTEM CBRN reconnaissance vehicle system has been designed for Chemical, Biological, Radiological and Nuclear reconnaissance. The system offers a fully integrated and automated NBC reconnaissance suit, controlled by central computer/s and operated by the vehicle crew.

AUTOMATED CREW PROTECTION CAPABILITY: • Air monitoring inside the vehicle (CO2 and O2 level monitoring); • Chemical detection and air monitoring inside the vehicle (including the NBC filter break-through surveillance). Detection of CWAs and TICs; • Real-time nuclear radiation monitoring in the vehicle for crew protection.

It provides automated crew protection capability and measuring instruments for NBC detection and identification, systems for visual reconnaissance, and remote (stand off) chemical detection. The system enables integration onto a suitable vehicle platform.

Configuration enables detection and identification of Chemical Warfare Agents (CWA), Biological Warfare Agents (BWA), Toxic Industrial Chemicals (TIC), and complete spectrum of other toxic releases (ROTA). All data acquisition and processing is automated. Reports are sent in NATO standardized mode.

CBRN RECONNAISSANCE SYSTEM CAPABILITIES: • Nuclear detection - area and ground contamination monitoring from the vehicle; • Chemical detection and outside air monitoring (CWA and TIC detection); • Biological detector - provides continuous and real time BWA detection capability (biological or aerosol type changes in the atmospheric background); • Remote (stand-off) infrared chemical detection. Automatic, real-time monitoring of all known CWAs and important TICs - up to a distance of 5 km - stationary or on the move. Complete 360° coverage, elevation angle from -10° to 50°;

The system has been extensively tested and approved by relevant (NATO) authorized test facilities.

17

EM.TRONIC D.O.O.

INTEGRATED CBRN RECONNAISSANCE SYSTEM • Sampling System - fully automated and remote controlled sampling system for collection of samples from within the protected environment of the vehicle. Collected samples are sealed in containers and stored outside the vehicle for further analysis;

• Laser threat detection and warning system - protecting against laser associated weapon threats; • System integration, Documentation and Training. ADVANCED CAPABILITIES: • Chemical identification - Mobile Mass Spectrometer with air-surface probe, gas chromatograph and surface sampler providing identification capability from any medium (soil, water, air); • Sampling wheels for ground surface sampling and detection/identification capability on the move;

• Marking System – automated, operator controlled marking system for contaminated areas;

• Visual reconnaissance systems (day and night observation capabilities) and weapon systems;

• Portable detection instruments; • Meteorological station - providing all required meteorological data to the system; • Central computer system and MFD Displays for the operation and control of all data collected from sensors inside and outside the vehicle; • NBC Software – fully integrated CBRN software system for the operation and control of sensor systems, data acquisition, alarm monitoring and reporting;

• GPS receiver – integrated GPS receiver ensures constant position information and precision guidance capabilities;

18

• Communication systems with required comm. software.

EM.TRONIC D.O.O.

STAND ALONE – N.B.C. DEFENCE DETECTION SYSTEM Stand Alone is a detection system for N.B.C. defense, for observing and protecting important buildings, for protecting people against possible N.B.C. attack with weapons for mass destruction.

Rugged computer with software interface enables instrument control and data transmission over radio to the Control Station.

Independent Stand Alone Units are placed on the field and automatically send data to the Control Station for N.B.C. monitoring. Stand Alone Unit consists of two cases. A battery is integrated in the power supply case and takes care for autonomous operation of the unit. Instruments for Chemical Warfare Agents (CWA’s) detection, Biological Agents detection and Radiological detection are integrated in the measuring equipment case. A meteorological station is used for measurement of wind speed, wind direction, humidity, air temperature and atmospheric pressure. Compass is integrated in meteorological station and is used for measuring wind direction according to North. GPS determines Latitude and Longitude of placed system in the field.

Control Station enables on-line monitoring and visualization of 5 Stand Alone Units, visual and audio alarms, saving alarm events into database and sending NATO standardized ATP-45 messages.

19

EM.TRONIC D.O.O.

Deployable Chem/Bio Laboratory Deployable Chemical Laboratory is designed for detection and identification of Chemical Warfare Agents (CWA’s) and Toxic Industrial Chemicals (TIC’s). Deployable Biological Laboratory represents a laboratory with a capability for fast on-site diagnostics. It combines functionality, efficient use of space and flexibility in BSL-3 containment. In the case of attack with weapons for mass destruction and biological agents, a rapid and effective response and correct identification of the biological agents is extremely important.

High quality BSL3 cabinet and instruments for the microbiological diagnostics enable accurate detection and identification of microorganisms which could be potential bioterroristic agents. With such containment, Deployable Biological Laboratory can provide safe, fast and accurate working process.

The Deployable Chem / Bio Laboratory containment integrates different instruments with hard and software support. The equipment enables data processing, communication and transmission of NBC reports. The NBC-Filtration-System consists of filters that protect against NBC agents. Positive pressure assures clean air in the laboratory as well as the negative pressure in glove box assures clean and safe working environment. Deployable Chem / Bio Laboratory is divided in three compartments: engine room, entrance with shower and laboratory with glove box. Samples for further analysis are prepared in glove box. Chemical Laboratory enables: • sample preparation for further analysis (air, aqueous, liquid, soil, wipe, active charcoal and othersamples), • identification and semiquantitive measurement of concentrations of CWA’s and other chemicals, • identification of toxins with rapid tests, • measurement of TIC’s concentrations, • sample acceptation, distribution and preservation for further analyses in reference laboratories.

20

Methods for direct and indirect detection of microorganisms performed in the Deployable Biological Laboratory include: • molecular-biological methods (detection of the nucleic acids, PCR), • light and fluorescent microscopy, • serological testing (detection of specific antibodies as a response to the infection), • safe sample handling in the laboratory/glove box (“hot/hazard” input), • survey of the results and output of the data. The Deployable Chem / Bio Laboratory can be further customized to fit specific needs.

FOTONA D.D. Fotona d.d. Stegne 7 SI-1210 Ljubljana T: +386-1-5009-100 F: +386-1-5009-200 E: [email protected] W: www.fotona.com

Fotona is one of the biggest European producers of military, medical and industrial optoelectronic devices and systems. It is traditionally well known as a manufacturer of laser rangefinders, laser warning systems, tank and artillery fire control systems. More than 15,000 laser rangefinders and 850 full performance tank fire control systems have been delivered to various customers worldwide in over 40 years of evolutionary development. The advantage of Fotona is its familiarity with the original military equipment and its mastering of modern technology, thanks to continuous R&D efforts and highly qualified workforce. The company is ISO 9001 certified. Laser rangefinders: Metrix family of laser binoculars with digital compass represents Fotona’s best selling military devices. Position determination, target location and other field measurements are but a few activities that become simple by the aid of the versatile members of Metrix family. In addition, digital data can be transferred from Metrix to other equipment. When connected into a tactical communication network, Metrix supports the concept of digitised battlefield by bringing digitisation down to individual soldiers.

• Metrix assures more reliable and accurate measurements of small targets on short ranges and under poor visibility; • Metrix determines the range to the target with a single pulse, minimizing the possibility of detection by enemy laser warning systems; • Shorter time of measurement and narrower laser beam means more reliable measurements of moving targets; Metrix is designed to operate either as a standalone instrument, connected to a GPS receiver or connected to a tactical data terminal. General purpose RS 232 or RS 485 data link is provided for connection to C3I equipment. ESLRF Based on proven Metrix electronic and laser components, ESLRF has been developed as a remotely controlled laser rangefinder module for airborne applications. Its maximum transmitted energy is within the limits of Class 1 IEC specifications. Total eye safety facilitates ranging against friendly and neutral targets. Typical applications include range sensing in stabilized optronic payloads, installed on UAVs, manned aircraft and helicopters. Boresighting with other optical sensors (thermal and video cameras) within higher-level system is achieved via precise mechanical interface as well as by a pair of optical wedges in front of the ESLRF laser transmitter aperture. . Data transmission protocol complies with RS 422 (other upon request). All functions of the instrument are accessible via remote control.

Metrix is equipped with a powerful yet eye safe Er: glass laser which offers a number of advantages over semiconductor lasers, frequently used in laser binoculars. • It has an inherently longer ranging capability ( up to 20 km), based on a simple time-of-flight measurement;

21

FOTONA D.D.

Laser Warning Systems: The purpose of these systems is to reduce vulnerability of the protected objects to laser-associated weapon threats by providing the crew with a visual and audio warning that their vehicle / ship / gun post etc is being irradiated by a pulsed laser rangefinder or laser designator/illuminator or that a laser beam riding missile is being aimed at. The warning will enable the crew to take appropriate self-protective action or countermeasure (manoeuvre, smoke screen deployment etc…). LIRD-4A and B are the latest in a series of a laser warning systems developed and produced by Fotona. They are characterized by a wide spectral range and high sensitivity combined with low false alarm rate. LIRD-4A allows monitoring the surroundings of the vehicle for scattered laser light by an indirect detection system, contributing thus to the integrity of protection. In addition to laser rangefinders and designators LIRD-4B detects missile-guiding lasers that guide so called “beam riding missiles” towards the target. A real time interface signal, which exactly reproduces the incoming sequence of laser pulses, is another standard feature of LIRD-4A and B warning systems. This signal may be used in countermeasure systems for control of deceptive laser sources.

LIRD-4A and B detect a number of laser sources in a wide range of visual and near infrared part of the spectrum, including: • Frequency doubled Nd:YAG • Ruby • Nd:glass • Nd:YAG • Er:glass • Raman shifted Nd:YAG, etc LIRD-4A and B have been so far successfully installed on the following vehicles and integrated into their countermeasure systems: 22

MBTs: T-72, M-84, T-55, Leclerc, APCs and IFVs: Pandur (Valuk), BMP-3, M-113, CV-90, Piranha, Otokar Cobra, Aligator,

Tank fire control systems: EFCS3 family of fire control systems has been designed primarily as a retrofit to all T-series tanks, not only those manufactured in former Soviet Union, but also their Yugoslav and Chinese derivatives. Minimum installation effort is required, since no armour cutting is necessary. Utilizing independent line-of-sight for continuous target tracking, the systems allow firing on the move to moving and stationary targets. Recently, Fotona introduced a third gen. thermal imager as a night channel of the gunner’s sight of the EFCS3 family. Fotona T-55 fire control systems: EFCS3-55B: is the most complex fire control system for modernization of T-55 tanks available. With minor modifications the system also fits into T-62 and T-59/T-69. Software is available for Russian 100 mm and 115 mm calibre guns as well as for 105 mm NATO ammunition. For maximum cost efficiency, existing gyros are used for stabilization of the gunner’s line of sight. Improved gun-triggering mechanism with accurately predicted fire gate enables firing at the moment when conditions are met for the highest hit probability.

FOTONA D.D.

FCP is an alternative, modernization kit, consisting of a digital ballistic computer, a laser rangefinder and a CRT reticule projector. Even with this simple and inexpensive system, the hit probability is substantially improved, although it does not provide a firing-onthe-move feature. Fotona T-72 fire control systems. Fotona has developed a number of fire control systems for T-72 tank, tailored to the prospective customers’ requirements. Some of them retain original TPD-K1 day laser sight, either as a back up or as an alternative source of laser range. The most advanced ones, such as TFCS3-M84 system for M-84 tank, however, do not rely on the original equipment whatsoever, offering instead the following advantages: • Fast and simple installation, maintenance and repair, • High first round hit probability and short engagement time, • 24 hours per day operation capability, assured by a state-of-the art thermal imager as a night sight, • Full integration with the existing automatic gunloading system, • Dynamic trunnion tilt sensing, • Tilt-independent target tracking, • Firing on the move with stabilized gunner’s field of view and gun-independent line of sight, • Variety of system configurations and optional equipment , • Optimal performance-to-cost ratio; Artillery fire control systems: ARTES-1000: ARTES-1000 is a system for battlefield observation and for planning, executing and controlling artillery fire. Combined with the telecommunications equipment on the forward observer’s post, it is used as an observation and data acquisition instrument, while at the gun position it is used as a device for calculating and displaying the elements of artillery fire.

ARTES-1000 supports activities on: • Observation post; • Command posts; • Gun positions Its main building blocks are observers’ modules and display modules, connected together via radio or telephone links. GXM data visualization software allows display of acquired information on military PC compatible computers. Observers’ module is a compact, rugged platform, consisting of EMK-5 electronic goniometer and RLDE2 eye safe laser rangefinder. Goniometer is equipped with a GPS receiver, an electronic compass, automatic leveling and communications devices. User interface comprises a graphic LCD screen with keypad; multilingual support includes English, Slovene, Arabic, etc. An optional thermal camera may be added for night observation and operation under adverse weather conditions. Observers’ module is used on the forward observation post, on the command post as well as on the gun position – for gun laying. Display module may be attached to the weapon, set on the tripod near the weapon or installed inside a self-propelled weapon. Its main function is to calculate ballistic data for each weapon individually and to display them to the gunner. The device has many hardware subsystems and software routines in common with the observers’ module, contributing thus to the overall modularity of ARTES system. System functions: On the observation’s post: • Orientation and battlefield observation; • Target data acquisition; • Fire correction;

On the command post: • Mission planning and control On the gun positions: • Gun laying • Ballistic calculations 23

Gostol-Gopan d.o.o. Gostol-Gopan d.o.o. Prvomajska 37 SI-5000, Nova Gorica T: +386 5 330 71 00 F: + 386 5 330 71 03 E: [email protected] W: www.gostol.eu

Gostol-Gopan d.o.o. has been a heavy duty equipment producer since 1947. One of its product range are tailor made solutions of process equipment for production of propellants for civil and defense industry purposes. Gostol-Gopan d.o.o. presents some of its special equipment such as Kneading and Cutting machines in accordance with Directive 94/9/EC.

The Kneading Machine is designed for kneading, mixing and homogenizing of pasty media.

The Cutting Machine »Guillotine« is designed for cutting bundles of extruded propellants or propellant strips.

Key benefits: • adjustable cutting length, very high accuracy; • PC/PLC control and monitoring of the process; • custom design; long term performance; Technical data: Feeding channel (height x width) [mm] Number of feeding channels

min.35x150 max. 100x150 2

Knife frequency (n1 - n2) [min-1]

120 - 60

Cutting length (lmin - lmax ) [mm]

0,2 - 6,0 (or more)

Single strip diameter (dmin - dmax) [mm]

0,6 - 3,0 (or more)

The Rotary Cutting Machine is designed for cutting extruded propellants with round shaped cross-section. Key benefits: • optimal performance by using two parallel, horizontal mixing arms; • mixing arms rotating at different rotating speed one against the other; • hydraulic drive; • double bottomed mixing bowl for flow heating, cooling or constant temperature maintaining; • heating media: steam, thermo oil or water; • emptying of the bowl by its overturning; • PC/PLC control and monitoring of the technological process in the Kneading Machine; • custom design; • long term performance.

24

Key benefits: • adjustable cutting length, very high accuracy; • PC/PLC control and monitoring of the process; • custom design; long term performance; Technical data: Rotary knife frequency [min-1]

305 - 915

Feeder frequency [min-1]

55 - 103

Cutting length (lmin - lmax) [mm]

2,5 - 19

Single filament diameter (dmin - dmax) [mm]

2 - 25

Guardiaris defense simulations Guardiaris defense simulations ZootFly d.o.o. group Knezov stradon 94 SI - 1000 Ljubljana T: +386 1 428 73 41 F: +386 1 428 73 42 E: [email protected] W: www.guardiaris.com

AWTS - Armored Warfare Training System AWTS M-84 main battle tank version of AWTS, was developed in close cooperation with Slovene Armed Forces and was rolled out to 45th Armored Battalion of Slovene Armed Forces in December 2009.

The Armored Warfare Training System (AWTS) is an advanced operational and tactical training system of tank crews and crew commanding staff. Single crew M-84 tank trainer consists of instructor station and three separate cabins which are exact replicas of commander’s, driver’s and gunner’s working environment in the M-84 tank.

AWTS FEATURES • Efficient and economical training of tank crews; • Training of tactics and communication procedures; • Simultaneous tactical training of multiple crews; • After Action Review and progress monitoring; • User friendly intuitive scenario editor; • Database of various units and warfare scenarios; • Compact, easy to transport and operate; • DIS / HLA interoperable with other systems. 25

Guardiaris defense simulations

PROPRIETARY VIRTUAL TECHNOLOGY • High-end real-time technology for simulations; • Friendly and opposing Semi Automated Forces; • Vehicle, weapon, terrain and scenario database; • Simulation of physics, dynamics and ballistics; • Photorealistic virtual environments and simulation; • Real-time calculation of multiple air and land entities; • GIS based terrain generation and rendering; • Flexible technology with different possible applications.

MODULAR TECHNOLOGY Proprietary technology enables development and maintenance of simulators for various tracked and wheeled armored vehicles.

GUARDIARIS PARTNER FOR YOUR PROJECTS Established in 2002 and is employing over 40 engineers and 3D experts. We have extensive know-how in development and maintenance of VR simulators and training tools for defense sector under Guardiaris trademark. We are co-founding member of Slovenian Defense Industry Cluster and have over 7 years of experience working with Slovene Ministry of Defense and Slovene Armed Forces.

26

Our virtual training system enables wide range of tactical land forces raining, with fully functional interaction and complete visual and aural information

HYGAL d.o.o. Hygal d.o.o. Mariborska cesta 143 Sl-2370 Dravograd T: + 386 2/8710-050 F: + 386 2/8710-051 E: [email protected] W: www.hygal.si

We are a family company with 30 years of experience in the field of machining (turning, drilling, milling, ..).

In the year 2000 we started to cooperate in automotive area, what means, more commitment to the products quality and customer satisfaction.

Our products:

Since y. 2003, we are certified refer to quality standard ISO9001 and continual we insure a certified quality management system and progressive measures for improvements in our performance. In the 2009 we obtained an approval and authorization of the Ministry of Defence for the production of weapons and joined the defense industry association of Slovenia. On our high - tech. CNC machines (27 pcs.), today, we mostly produce the turning parts for automotive and other industry for customers coming from Austria, Germany and Sweden. We are also able for production for some parts (all material) for defense industry as folow: • special components, • assembly parts, • other spare parts…

27

IKOR-B D.O.O. IKOR-B d.o.o. Šujica 74, 1356 Dobrova pri Ljubljani T: + 386 1 36 41 260 F: + 386 1 36 42 265 E: [email protected] W: www.ikor-b.si

Company IKOR-B was found in year 1969 by Mr. Franc Birtič and from then engages in innovative activity from filed of metal working and civil engineering, with wide range of product based on own development.. Company has a lot of international patents and awards for innovations which one of inventions is Modular Camp Systems assembled of Quick Folding Containers and Modular Halls

Natural disasters and states of the war are phenomena occurring daily on different ends of the world. The needs for quick military or rescue groups intervention continue to increase all over the world. We are aware of the importance to respond rapidly to emerging crisis situations. The equipment of rescue teams is one of the key factors affecting a rapid, adequate response. The rapid development of IT systems increasingly based on the commercial IT components also results in a change of requirements to be met by mobile accommodation /office systems. The IKOR-B d.o.o. focuses on solving and providing living and working conditions for such rescue teams. For this purpose our company manufactures the so-called quickly assembled accommodation and office containers. One of the essential characteristics related to the assembled containers is represented by the requirement of a minimum cargo volume reducing consequently the transport and storage costs.

28

ADVANTAGES OF RAPIDLY ASSEMBLED ACCOMMODATION AND OFFICE CONTAINERS • A simple and quick container manipulation (assembly - disassembly) without any special tools .The container is designed to withstand multiple assembly and disassembly without significant impact on container or modular hall construction parts. • Simple setting up and fast restoration container climatic environment with air-conditioning. • All containers and modular halls are equipped with electrical and IT installations providing for a simple and fast connection with a power source and connection between individual container units (C4I System: Command , Control, Communication, Computerization and Information) • A small containers weight and outside gauge, enables transport by a medium size helicopter or transport aircraft. • The construction design of containers and modular halls allow a variety of setting up combinations and connections of container units into the functional entities. • Adjusting ability with tents and other containers. • Small storeroom and transport volume: The folded accommodation containers and modular halls of approx. 40 m2 useful accommodation surface may be stored and transported in a standard transport container (lower transport and storage costs). • The containers and modular halls are designed to insure comfortable working environment climate according to STANAG 2985

IKOR-B D.O.O.

Slovenian army and civil defence units use and test rapidly assembled accommodation / office containers since 1997 within various operations for various purposes, as follows: • In controlled peacekeeping operation, in cases of natural disasters. • Protection of soldiers and equipment in extreme conditions of activities on heavily accessible places. • During military exercises and trainings. • The Information Centre for guidance in crisis situations. • The Veterinary Field Hospitals and Mobile Laboratories. MODULAR CAMP COMPRISES OF THE FOLLOWING UNITS:

Quick Assembly Container HBK Type 1 NSN code 5411-42-0000054

Modular Hall composed of two Modules - Type DMD NSN code 5410-42-0000070

Quick Assembly Container HBK Type 2 NSN code 5411-42-0000064

Modular Hall composed of three Modules –Type TMD NSN code 5410-42-0000079

20’ ISO 1C Transport container NSN code 8145-42-0000052 Loading the container on a vehicle (ROLLBAR Loading System)

For transport and storage of Quick Assembly Containers, Modular Halls and their equipment, two types of standard 20’ ISO containers are modified, in which four or five Quick Assembly Containers are placed and provide approx. 8m/3 of additional space for other equipment (Air condition, furniture, toolboxes and other necessary equipment for assembling the camp). Quick Assembly Containers or Modular Hall Modules are placed on a transport mechanism running on special rails inside a transport container.

29

Iskra Kondenzatorji, d. D. Iskra Kondenzatorji, d. d. Vajdova ulica 71 SI-8333 Semič T: + 386 7 38 49 200 F: + 386 7 30 67 110 E: [email protected] W: www.iskra-semic.si

Infrastructure facilities and their high-quality electricity supply are of great importance for a defence doctrine in each country. High-quality protection from radio-frequency disturbances is required for good operation of electric devices used for defence purposes. High-quality energy capacitors and efficient compensation of reactive energy are necessary in energy systems and at transmission and distribution of electric energy. Capacitors for application in electronics, motor capacitors and capacitors for lighting applications are convenient for communication purposes, electrical equipment, electric tools, electronic devices and automotive electronics.

About Iskra Kondenzatorji The Iskra Kondenzatorji company has more than 50 years of tradition in the field of manufacturing capacitors, components for elimination of radio-frequency disturbances, and devices for compensation of reactive energy. We manufacture products, offer services and develop innovative system solutions ensuring efficient, environmentally friendly and economic energy management. The quality of our offers is guaranteed by great knowledge and extensive experiences. Fields of work: • Components for elimination of radio-frequency disturbances • Capacitors for electronics • Motor capacitors / capacitors for lighting applications • Low-voltage energy capacitors • High-voltage energy capacitors • Capacitors for induction heating • Devices for compensation of reactive energy

30

All our products and solutions include ecologically suitable materials. In addition to the development and designing of capacitors, we also tailor our products to customers’ requirements.

Compensation of reactive energy Reactive energy should be correspondingly compensated since it entails unnecessary costs for electric energy. This can be done by a compensation device consisting of a reactive power regulator, a contactor and a capacitor battery. The regulator of reactive power in a capacitor battery switches on and off, depending on power factor in the network and on a required factor value. Our company provides for a key solution. We manufacture fixed compensation devices for the compensation of low-voltage transformers, power increase in already integrated compensation devices, automatic compensation devices for the compensation of reactive power in distribution centres and industrial premises, automatic compensation devices with harmonic filters for the centralized compensation of reactive power in industrial and other premises where harmonics are present in the electric network as well as dynamic compensation devices for the compensation of reactive power in industrial premises where dynamic drivers are used.

ISKRA SISTEMI D.D. Iskra Sistemi, d.d. Stegne 21 SI-1000 Ljubljana T: + 386 1 513 10 00 F: + 386 1 511 15 32 E: [email protected] W: www.iskrasistemi.si

Defence and Security Recently, the defence and security doctrines have been changing completely. The progress of telecommunication techniques has enabled high-quality and fast digital voice and data transmission to become an increasingly important element of defence systems. The threat of terrorism demands new ways of protection. After joining NATO, the Slovenian armed forces are equipped in line with the new requirements for ensuring safety at home and for efficiently helping international missions aboard. Furthermore, non-military security systems are rapidly adjusting themselves to these new conditions.

MILITARY IT SYSTEMS • Tactical communications • Air space control • Artillery command and control • Internal communication in the vehicles • Mobile command and control systems PROFESSIONAL AND MOBILE RADIO • Functional links • Paging • Control systems for operation and communication centres

In-depth knowledge of the current systems and the new requirements enables us to cooperate with our foreign partners on an equal footing when offering modern and effective IT solutions to our armed forces and other bodies responsible for the provision of security, protection and rescue operations.

DOMESTIC SECURITY • Border control systems • Security in emergencies and natural catastrophes • Protection of important infrastructure • Crisis management

About security we should think well in advance. One of the correct responses to the increasing world-wide danger is electronic security, protecting people and their property. Our customers are offered the latest technological solutions in security, since we are closely connected with the leading manufacturers in this field. The electronic security systems that we market are distinguished by their high degree of reliability, capacity, efficiency, adaptability, accuracy and connectivity, thus ensuring the lowest possible number of false alarms.

ELECTRONIC SECURITY SYSTEMS • Fire protection • Intrusion protection systems • Gas detection systems • Access and time-attendance control systems • Video monitoring • Central monitoring systems

31

ISKRATELING d.o.o. Iskrateling d.o.o. Ljubljanska c. 24a SI-4000 Kranj T: + 386 4 20 76 276 F: + 386 4 20 76 277 E: [email protected] W: www.iskrateling.si

MMARS – Modular Multiservice Architecture for Real-time Services With 60 years of experience, Iskratel Group ranks among the world’s leading high-tech companies in the market for integrated telecommunications solutions. It provides state-of-the-art, corporate communications solutions, especially for dedicated networks, and it has long-term experiences in the field of military solutions. Iskratel’s MMARS (Modular Multiservice Architecture for Real-time Services) is designed for various military deployments, public safety, humanitarian aid relief and first responders. It was developed in accordance with the needs of the Slovenian military as a pilot for a next-generation, packet-based, tactical network and

can be used as the basis for many new products, implementing the latest TACOMS STANAG, which is defined for NATO countries to enable interconnectivity. Iskratel’s MMARS node is a perfect solution, enabling a rapid response in the event of a crisis or a variety of natural disasters, while maintaining connectivity and service reach with legacy equipment and interconnections with the public telephone network. It is a compact, instantly deployable, next-generation, packet-based, communication node, providing a rich set of services, including voice, video data and user mobility; it weighs less than 80kg and is a ready-touse complete telecommunications network node. The MMARS node is developed according to the latest ETSI (IMS, MLPP, H.323), IETF (SIP, SIP-T) and NATO (TACOMS and NNEC) standards, thus providing a rich set of quad-play services with superior service quality and standardized external interfaces, with backward compatibility to legacy (tactical, PSTN) systems. The services, like priority services, announcements, message play and record, advanced multimedia conferences, and other sophisticated capabilities, including security features, if needed, are provided as an integral part of the MMARS node. Nevertheless, the MMARS node provides, combined with Battlefield Directory or Home Subscriber Server, user/terminal and service mobility that allows users to access services, not only on one node, but they are able to “roam” seamlessly between nodes. The heart of the MMARS node is represented by Iskratel’s off-the-shelf SI3000 MultiService Control Node (MSCN) and different security elements like FireWall, Routers, Intrusion Prevention System (IPS) and Session Border Controller (SBC). The SI3000 MSCN provides secure and authenticated access to the quad-play services for users and O&M features for MMARS-node maintenance personnel. For interconnection with other MMARS nodes or third-party telecommunications nodes over unsecure communication channels, FireWall, Router, IPS and SBC are used. Additionally, crypto boxes providing militarygrade encryption may be integrated into the MMARS node.

32

ISKRATELING d.o.o.

Furthermore, the MMARS node can be incrementally populated with other access technologies, like xDSL, WiMAX from SI3000 MultiService Access Node (MSAN) products, based on field/environment requirements,

eliminating costly wholesale platform upgrades and providing network-deployment flexibility.

Product Features

Benefit description

Easy Usage

The MMARS node can be preconfigured to minimize deployment time. This enables a rapid response in the case of crises and various natural disasters.

Military standard case

The case is a military version of the aluminum box with additional vibration damping. If back and front lids are closed the equipment is protected from dust and from jets of water (IP65) while being transported. It has four handles for on-site moving.

Industrial-grade COTS components

The complete MMARS node is built around commercial components, thus providing a cost-effective solution to be used for different deployments. All the components fit into a standard 19-inch rack, mounted into an aluminum rack, with additional holding brackets to allow it to withstand greater forces.

Quad-play (voice, video, data, Full multimedia quad-play service support, combined with user/terminal momobility) service support bility, independent of the access technology used. More than 100 different services are available, including priority service (MLPPP Multi-Level Precedence and Preemption), advanced conferencing, integration with the Battlefield Directory or Home Subscriber Server, if needed, and other sophisticated services including security features. 33

IZop d.o.o. IZOP d.o.o. Topniška ulica 29 SI-1000 Ljubjana T: +386 1 43 79 472 F: +386 1 43 79 473 E: [email protected] W: www.izop.si

- Manufacture of fabricated metal products of dedicated industry - Export and import - Representative program, development, storage

The Protective Helmet

Helmetofone

Pilot Helmet

Pilot Oxygen Mask

We provide an integrated or integration of several activities in the life cycle of conventional ammunition. The life cycle of munitions, inter alias: the definition of requirements - needs, conceptual planning, detail planning, storage, transportation, handling, maintenance, use and retirement - demilitarization. We offer comprehensive engineering services in the management and implementation of investment projects in the field of maintenance and demilitarization of conventional ammunition, which includes professional implementation of activities in all stages of investment processes. We offer investors the creation of timely, quality and integrated solutions from idea to execution.

34

To the investors we provide comprehensive technical and organizational support in all phases of planning, development, and implementation of the project. Special attention to cooperation with the customer in the early stages of planning for the success of the project is crucial. Subscribers are listen closely, they are advised and directed. We also, provide education and training Appropriate of our services and technological equipment.

Logon d.o.o. Logon d.o.o. Tehnološki park 24 SI-1000 Ljubljana T: +386 1 565 50 68 F: +386 1 565 50 69 E: [email protected] W: www.logon.si

Logon unites experienced experts from various disciplines of visual information technology. The company’s principal activities are software development, IT support, visual information systems, virtual manuals and virtual simulations. Our research and development strategy is focused primarily on military simulations and simulations for crisis management. Our principal objective is to provide positive training experience with the help of authentic virtual environments and a high-fidelity 3D database of virtual entity assets, which dynamically represent operational conditions of the real world in a synthetic environment.

It greatly contributes to the improvement of qualifications and training level of personnel and their general safety. The utilization of these virtual training solutions also has positive effects on costs and environmental impact. Logon provides educational, training and decision making capability in form of virtual training simulators. Our immersive military and civil defence simulators have been shown to be effective for training a variety of tactical and operational skills.

They were made for the purpose of training Slovenian Armed Forces members who participate in the ISAF mission in western Afghanistan.

The simulator enables multi-language computer assisted exercise training. It is suitable for group training in different crisis scenarios (control points, convoy protection & escort, patrolling, ISR and urban warfare).

Below presented training solutions were developed in close cooperation with our partner ZootFly company under the NATO programme „Science for Peace and Security 2004-2010“, financed and supported by the Slovenian Ministry of Defence.

Crisis Response Operations Simulator – CROS The CROS simulator includes many 3D virtual replicas of the military and civilian assets, environment and buildings in FSB Camp Arena, Herat city and nearby villages.

Strong emphasis is put on interactive education for mission familiarization and culture training. 35

Logon d.o.o.

Crisis Management Simulator –CMS The CMS simulator is designed for education, monitoring and enhancement of skill for emergency responders (Police, Firefighters, Paramedics, Civil Protection, Military, etc.). It does so by providing computer assisted exercises of various crisis scenarios, such as natural and other disasters. It is suitable for tracking of consequences of terrorist acts and training of counter-terrorism practices, tactics, techniques and strategies. The multi-language application is designed to be modular and can thus be adapted for different users. CMS enables: In CROS soldiers have to detect and resolve asymmetric threats and minimize the dangers to themselves and the civilian population while performing their duties.

The simulator is suitable for defensive training and analysis of asymmetric threats (IED, VBIED, EFP, suicide bombers, sniper attacks, RPG attacks, etc.).

• Triggering of individual, sequential or multiple incidents.

• Complete overview over the virtual incident environments and chain of events. • Critical infrastructure protection (CIP) in case of fault, incident or attack.

• Valuable outcome assessment and exercise evaluation.

36

PRIMAT tovarna kovinske opreme d.d. PRIMAT tovarna kovinske opreme d.d. Industrijska ulica 22 SI-2000 Maribor T: + 386 2 25 07 610 F: + 386 2 25 22 689 E: [email protected] W: www.primat.si

Facility Security Clearance Certificate – FSCC Security clearance in accordance with the provisions of the Industrial Security Directive supporting Enclosure »G« to the NATO Security Policy, C-M (2002)49 Up to the NATO CONFIDETIAL level Freestanding Safes Series STARPRIM

Secure Cabinets Series VARPRIM

Freestanding Safes Series STARPRIM

Secure Cabinets Series VARPRIM

European Standard: EN 1143-1 STARPRIM 1 – Security Grade CEN I STARPRIM 2 – Security Grade CEN II STARPRIM 3 – Security Grade CEN III STARPRIM 4 – Security Grade CEN IV STARPRIM 5 – Security Grade CEN V

European Standard: EN 14 450 VARPRIM – Security grade S1

Shelf

Inner compartment (VP 1950/930-1200, H=300 mm)

Inner compartment (VP 1580-1220860/600, H=180mm)

Pull-out frame with divider

Pull-out drawer

Pull-out shelf

37

PRIMAT tovarna kovinske opreme d.d.

Secure ROOMs Series MODULPRIM

Secure doors Series DOORPRIM

Modular construction Series MODULPRIM

Secure doors Series DOORPRIM

European Standard: EN 1143-1

European Standard: EN 1143-1

Also available: protection against electromagnetic disturbances MODULPRIM 0 – Security Grade CEN 0 MODULPRIM 1 – Security Grade CEN I MODULPRIM 2 – Security Grade CEN II MODULPRIM 3 – Security Grade CEN III MODULPRIM 4 – Security Grade CEN IV MODULPRIM 5 – Security Grade CEN V MODULPRIM 6 – Security Grade CEN VI MODULPRIM 7 – Security Grade CEN VII MODULPRIM 8 – Security Grade CEN VIII MODULPRIM 9 – Security Grade CEN IX 1. Floor and cellings components 2. Construction of components 3. Inner covering 4. Cables opening 5. Ventilation system 6. Secure Door 7. Airing 8. Outer coverings

Secure doors are a crucial component of secure rooms and they must assure the same or even higher level of safety than the secure rooms themselves. DOORPRIM DOORPRIM DOORPRIM DOORPRIM DOORPRIM DOORPRIM DOORPRIM DOORPRIM DOORPRIM DOORPRIM

0 – Security Grade CEN 0 1 – Security Grade CEN I 2 – Security Grade CEN II 3 – Security Grade CEN III 4 – Security Grade CEN IV 5 – Security Grade CEN V 6 – Security Grade CEN VI 7 – Security Grade CEN VII 8 – Security Grade CEN VIII 9 – Security Grade CEN IX

Secure ROOMs Series MASSIVPRIM Solid construction Series MASSIVPRIM European Standard: EN 1143-1 Regular Security Grade: MASSIVPRIM 5 – Security Grade CEN V MASSIVPRIM 6 – Security Grade CEN VI MASSIVPRIM 7 – Security Grade CEN VII MASSIVPRIM 8 – Security Grade CEN VIII MASSIVPRIM 9 – Security Grade CEN IX MASSIVPRIM 10 – Security Grade CEN X MASSIVPRIM 11 – Security Grade CEN XI MASSIVPRIM 12 – Security Grade CEN XII MASSIVPRIM 13 – Security Grade CEN XIII

Upgraded Security Grade [CD=Core Drill Protection]: MASSIVPRIM 9 CD – Security Grade CEN IX-CD MASSIVPRIM 10 CD – Security Grade CEN X-CD MASSIVPRIM 11 CD – Security Grade CEN XI-CD MASSIVPRIM 12 CD – Security Grade CEN XII-CD MASSIVPRIM 13 CD – Security Grade CEN XIII-CD

DEPOSIT SAFES A secure room after filling with concrete mixture and de-panelling

Double-wall construction Series DEPOSIT SAFES According to European Standard: EN 1143-1 DEPOSIT SAFE 1075/N DEPOSIT SAFE DEPOSIT SAFE DEPOSIT SAFE DEPOSIT SAFE DEPOSIT SAFE DEPOSIT SAFE

Installation and assembly of wall armouring elements

1095/N 2075 2100 3075 3100 4125

Installation and ssembly of Secure door

Installation of floor armouring elements

38

Installation of armouring elements and static armouring elements is performed at the same time

Armouring elements and static armouring elements of a secure room, prepared for panelling and filling with concrete mixture

Depositing from first drawer DEPOSIT SAFE G/700 DEPOSIT SAFE G/530

Depositing from second drawer DEPOSIT SAFE G/530/3L

P TEAM D.O.O. P TEAM d.o.o. Podjetje za inženiring, proizvodnjo ln marketing Log, Pot na Ferjanko 1 SI-1351 Brezovica T: + 386 1 563 1033 F: + 3861563 1034 E: [email protected]

P TEAM d.o.o. has been a production company since 1991 and has a lot of experience in production of lifting and fixing equipment made of polyester. The company specialises in production of round slings, lifting slings with loops, lashings, lifting slings with hooks, transport and fixing nets. Company’s standard production is equipment for up to 20,000 kg, equipment for heavier load limits can be produced on special request. Webbings are - thanks to their limit load and safety factor - suitable for use on terrain. Mass of webbings in proportion with tensile strength gives better results when working outside. Lifting slings in combination with hooks or other accessories are very suitable for air transport. On terrain they can be used in different combinations and are suitable for manipulation of freight on land or in air (helicopter transport). Transport nets are made of high quality polyester and are suitable for land and air transport of freight. They can be used for fixing freight onto pallets for air transport. Nets and other equipment are produced in standard dimensions, special dimensions are available on request.

39

S&T SLOVENIJA D.D. S&T Slovenija d.d. Leskoškova cesta 6 SI-1000 Ljubljana T: +386 1 5855 200 F: +386 1 5855 201 E: [email protected] W: www.snt.si

S&T Slovenija Defence Programme

Soldier’s Communication and Information System

S&T Slovenija is the leading provider of high-performance IT solutions and system integration in its region. The company is setting standards for the future by offering a wide range of solutions, technologies and products for information support in military operations. The company’s information systems for the military industry ensure top combat readiness and defence security. In 2007, S&T Slovenija formally founded the Military Programme Department aimed at developing solutions for the defence industry, specifically for information support in various activities of the Slovenian Armed Forces.

Soldiers on the battlefield today need information that is derived from data, distributed through fast digital networks and gathered by advanced sensors. The new soldier’s equipment kit allows each unit to share real-time information with other units, coordinate movement and react to battlefield conditions quickly and accurately. Network-centric warfare is a relatively new concept that unifies all the advantages gained by other elements of the newly developed digital components.

Slovenian Armed Forces are therefore guaranteed a reliable and secure exchange of structured electronic information all the way from the reconnaissance to the highest ranks of military command structure. S&T Slovenija has clearance to handle various data and documents, including NATO confidential information.

S&T is developing small add-ons and plug-ins to implement specific functionalities that are requested by customers. These add-ons expand the functionalities of the existing C4I COTS tactical solution provided by the Danish Systematic Engineering.

In the Adriatic region, S&T Slovenija is a Systematic authorized representative. S&T’s range of products includes military computer equipment by Login, GD/ Itronix, Panasonic, Blazepoint and BFI Optilas, which has been customized for use in extreme conditions.

Projects & Products PDS (Peripherial Device Server) The Peripheral Device Server integrates different military vehicle information and communication systems. It communicates with different systems by using various standards throughout the internal vehicle network or serial connections. It serves relevant data to personnel inside the vehicle or enables communication between vehicles by utilizing the tactical radio communications network. The PDS is currently being developed for Patria AMV 8x8, Steyer Pandur 6x6 (Valuk), and Otokar Cobra CBRN vehicles in use by the Slovenian Armed Forces.

40

SitaWare Plug-ins

UMO – Mortar Fire Control System The UMO application significantly improves command and control of mortar fire, leading to improved speed and accuracy of aiming. The modular design of the application reduces complexity and allows easy extensibility. Every module functions independently and communicates with other modules through a separate radio communication system. The individual modules can be activated or deactivated according to the role of the application user in the hierarchy of the mortar company. The solution is based on the MIP C2IEDM data model.

S&T SLOVENIJA D.D.

TMS – Transport and Movement of Motorised Vehicles and Convoy Systems The TMS application delivers the capability to record key data on vehicles and convoys, to plan their positions and movement, and track their physical movement using the GPS and mobile computing platforms in the vehicles. The system supports data collection on vehicle movements, saves the information about the vehicles in the system ADAMS C2IEDM and in the LOGFASS format, and also recognizes the vehicle’s condition. It notifies route planners of possible detours and uses the systems to track vehicles.

VBS2 Virtual Battlefield System (SOP trainer / Process modeler) S&T Slovenija consults, installs and maintains the VBS2 simulator – a fully interactive three-dimensional simulation system focused on small unit tactics and training of the operational procedures up to the company level. It is suitable for a wide range of training scenarios in a chosen simulated environment. Units use it to speed up their reactions and improve the organization of activities. Applications of VBS2 include, among others, mission rehearsal, tactical training up to combat team level, fire support, navigation, mission simulation and training in an urban environment.

sensor systems present in the AMV 8x8 vehicles. Integration of these systems is performed against the IS PINK system using the vehicle’s communication network to distribute the data. CBRN Recon vehicles – Integration of chemical sensor equipment, connection to a common military computer system according to the MIP standard.

IT support for Slovenian Armed Forces S&T Slovenija provides information support for the Slovenian Armed Forces. It also organizes seminars and participates in the implementation and maintenance of the C4I/C2I systems. Our experience and extensive knowledge from the military field make S&T Slovenija the best partner when you are looking to outsource information services and support in the region.

Core Competencies Extensive domain knowledge In addition to top level IT specialists and developers, S&T also employs people with military background and ex-military personnel with over 30 years of combined experience.

S&T Slovenija developed a training environment focused on target management. The visually simulated environment enables the targeting process to be analyzed and modulated at the level of a motorised platoon. Multiple teams can train at the same time in the simulated environment, which significantly reduces the costs of use in the field and the duration of operations.

In-depth knowledge of C2IEDM model

C2IEDM database integration projects

GeoSpatial information Systems – Extensive knowledge of ESRI GIS, Teleplan Maria GIS and Custom Mapping and navigation engines.

In order to provide secure and reliable transfer of information, all communication between applications is handled by custom software developed specifically for these systems. All applications communicate with the C2IEDM database, where they acquire the necessary information about the objects they deal with.

S&T Slovenija is active in the Multinational Interoperability Programme (MIP), an effort to deliver guaranteed interoperability of information to support combined joint operations. It is also participating in the DMWG group by performing in the information engineering discipline known as Data Modelling.

Command and control on the battlefield system capabilities include transfer of own-force data, intelligence data and less complex orders, mortar fire support coordination and support for Slovenian Armed Forces on missions abroad. Armoured Modular Vehicles 8x8 – The objective of the project is a seamless integration of weapon and 41

SAVATECH D.O.O. SAVATECH d.o.o. Programme EKO Environmental Protection Products Programme Škofjeloška c. 6 SI-4000 Kranj T: +386 4 2066 385 F: +386 4 2066 390 W: www.sava.si

Rescue and environmental products for military applications Sava low pressure maxi cushions are an excellent choice for towing and recovery operations. Up to 2,10 m tall and lifting capacities of 9 t (each) makes these bags the ideal choice when recovering downed aircraft, large trailers, rail cars or anything that requires heavy lifting with minimum concentrated lifting force.

Medium-pressure heavy lifting air bags can be inserted under objects with as little as 2” (50mm) clearance. Capacities up to 11,902 kg. Use for heavy load lifting, shifting, leveling, or as padded supports.

42

SAVATECH D.O.O.

High pressure lifting bag – Flat bag - for heavy-duty, low profile heavy lifting, emergency rescue, HAZMAT management or industrial use. When the bag is being inflated, it does not take a typical, ball shaped form, due to the restraints in the inside of the bag. Instead the bag keeps a flat shape (picture below). The flat surface of the lifting bag ensures perfect stability when used, and enables the use of two or three bags of the same dimensions at the same time, which results in the increase of the lifting height.

Sava Inflatable Shelters – Applications for Sava shelters are almost unlimited. They are commonly used for: • Protection from the elements, • as decon shelters in case of hazmat accidents, • storage for hazardous materials and protection from the elements, • incident command center, • storage of various ordinance and protection from the elements, • activities in connection with crime scene investigations, • first aid center, • mobile hospital (in army), • as a canteen when conducting different types of operations.

43

SAVATECH D.O.O.

Interceptive tanks - Double-layer, rubber-coated polyester fabric tanks are chemical and oil resistant. The inflatable collar floats and lifts as the fluid level rises. Storage tanks are very compact and light-weight for easy storage. Long service life and wide temperature use range makes these tanks ideal for emergency interception of hazardous liquids or water storage for fire fighting as well as many other uses.

Mobile decon units - For prevention of hazardous spills when tanks are filled or emptied. They are also used for decontamination rinse receptacles. The inflatable collar floats and lifts as the fluid level rises.

Rubber tanks - Closed rubber storage and transport tanks can be used as storage and transportation receptacles for various chemicals and liquids including water. Tanks are pillow shaped with two nipples: one on top for filling and deflation; and one on the side for filling and emptying.

44

SAVATECH D.O.O.

Single person shower unit. Hazmat, incident site, remote locations. Sava Single Person Shower Unit is a lightweight, compact, transportable shower ready for immediate use. Small and light enough to be carried on a backpack. Fire resistant materials available.

Inflatable platform - recovery - total stability use as raft, use as work platform, mud flat recovery, ice rescue.

Inflatable stretcher - Functions as a conventional stretcher, with padded grip handling facilities. Lifts by helicopter, out of difficult trouble spots. Certified to lift up to 350 kg. Hauls in the horizontal or vertical plane and can be rigged to a ‘Breeches Buoy’ ship-toshore transit system. Toboggan over ice, snow, marsh grass, sand, mudflats, gravel and swamp. Floats with excellent stability. Trials by land and sea rescue personnel prove beyond doubt its great potential as a SAVER OF LIFE AT SEA: Can be used in flood situations, oil production platforms, ice rescue, cave and pothole rescue, police, underwater search units, etc. 45

SISTEMSKA TEHNIKA ARMAS D.O.O. Sistemska tehnika Armas, d.o.o. Koroška cesta 14 SI-2390 Ravne na Koroškem T: +386 2 870 77 90 M: +386 51 650 255 F: +386 2 870 76 05 E: [email protected] W: www.st-ravne.si, www.armas.si

Services and Products

System Integration & Development • Development • Testing

Artillery Weapon Parts

Armor Systems

Services

• Barrels • Breech Rings and Breech Blocks

• Torsion Bars • MBT M55S • Driver Training Tank

• Service of Armoured Vehicles • Service of Artilery Equipement

System Integration & Development

Artillery Weapon Parts

Based on rich experience of production of light armored vehicles, artillery systems and main battle tanks, we are offering development and system integration of various equipment in uniform system, tailored to customers needs.

Our rich experience in the development of materials for artillery barrels, technology of steelmaking, forging, heat treatment and machining place us among the leading producers of rough-machined and heat treated barrels as well as other highly stressed parts of artillery weapons.

In the field of development and system integration, we are offering: • Planning, design and analysis of system configuration and integration of weapon system and vehicle. • Production of upgraded/integrated armored systems. • Testing of integrated weapon-vehicle system according to AVTP and other military standards. • Training and customer support.

• We deliver finish machined and hydrostatically tested smooth barrels, breech rings and firing pins, etc. for mortars from 50 mm to 120 mm calibre in conformance with customer drawings and technical requirements. These products can be also delivered as rough-machined and heat treated only. • We deliver barrels, breech rings and breech blocks as rough-machined and heat treated for aircraft cannons and anti-aircraft guns, recoilles guns, howitzers, guns, tank guns and gun howitzers from 20 mm to 203 mm calibre. BARREL FOR GUN-HOWITZER 155mm/39 CALIBRE

2090

φ 135

φ 290

φ 360

170

φ 250

Test piece

390

Test piece

2480 6395

material: Kato 1 VAD mass: 3300kg

BARREL FOR GUN-HOWITZER 155mm/45 CALIBRE Test piece

φ 245

1785

1785

φ 120

623

φ 282

φ 358

φ 345

Test piece

1475 7305

material: Kato 1 VAD mass :3450kg

BARREL FOR GUN-HOWITZER 155mm/52 CALIBRE

1840

655 8440

material: Kato 1 VAD mass: 3600kg

46

φ 228

φ 138

2050

φ 236

390

318

φ 290

Test piece

φ 340

Test piece

SISTEMSKA TEHNIKA ARMAS D.O.O.

Torsion Bars

Service and Maintenance

We produce special torsion bars and torsion tubes which are used for combat systems as for ex. tanks, armoured carriers, howitzers, guns, rocket launchers, etc. They are made of special steels with own developed technology in compliance with internal regulations and customer requirements.

• We implement servicing, reconstruction and upgrading of artillery weapons and armoured wheeled or caterpillar vehicles together with armament, the communication and vision system.

Main characteristics : • length 500 – 2500 mm , • max. diameter 100 mm , • max. torque 60 kNm .

• We are carrying out a regular maintenance service of Valuk 6x6 vehicles for SA.

TECHNOLOGY COMPARISON OF TORSION BARS Life Cycles in Percentages 100 % Type III (STAr d.o.o.. Torsion Bar, material by STAr d.o.o.., production technology by STAr d.o.o. 28 % Type II (Modified Torsion Bar, standard material,production technology by STAr d.o.o.) 16 % - Type I (standard material, standard production technology)

About the Company Our development and production are based on highly educated and experienced staff, modern equipment for development of products and technologies, quality material base, that has been upgraded with high-end thermical treatment and our own laboratory for non-destructive testing and calibration which is accredited according to international standards. Our excellence is proven by standards ISO 9001 and 14001 and long and close cooperation with Slovenian Army, research institutions and companies in Slovenia and abroad.

Armor Systems: MBT M55S, Driver Training Tank M55S USP Key elements of our T55 upgrading are: • Increased fire power • Modern optical and electronic system • Increased ballistic protection • Upgraded communication system

47

THYIA D.O.O. THYIA d.o.o. Dimičeva 9 SI-1000 Ljubljana T: +386 1 28 06 500 F: +386 1 28 06 519 E: [email protected] W: www.thyia.si

Thyia Technologies (THYIA d.o.o.) is an SME, a spinoff of Thyia Technologies SarI, Iskra Zascite d.o.o., and Industrial Electronics SPIN d.o.o. Continuing the previous R&D activities of Thyia Technology Sarl in Information and Communication Technologies (ICT), THYIA remains dedicated to ensuring & enhancing the security and safety of ICT Networks, Data Protection, Civil Protection (CP), Critical Infrastructure Protection (ClP) i.e. Electricity, Gas & Oil, Transport, Telecommunications, Water, Agriculture, and Finance. Building

p

on THYIA’s strengths of competence, technology and research, the aim is to contribute with new product solutions for homeland security and to be involved in shaping European security. Strategic product development is focused on future home networks and intelligent systems, i.e. the smart environment. THYIA is working with leading European companies and research centers on Smart Grids, environments and eco-system for future home and commercial convergent networks. The new products are supported by an

Outsourcing Outsourcingbased basedon onknowledge knowledge & and understanding, many years understanding, andand many years of of experienceisisaabusiness businessstrength strength experiences that that improves performance leads improves performance andand gives to advantagesover overcompetitors. competitors.The Our advantages broad competencies range of competencies and and broad capabilities capabilitiesare aremaximizing maximizing opportunities, avoidingavoiding unnecessary risk and opportunities, unnecessary offering and partners more risks andclients offering the customers and added values at the European level. partners more added values at the All of this is embodied in the client's European level. All of this is part of projects, technical studies, optimal customer’s projects, technical studies, use of available technologies, and optimal use of available system integration.

e

technologies, and system integration.

Networking capabilities is growing rapidly. Complexity and functionality of the IT and Telecom environment is changing very fast as well, requiring a high level of knowledge and expertise. Networking with key European research institutions and companies is the way forward to meet the challenges of any complex and hightechnology project.

Our expertise is in conducting collaborative multidisciplinary and integrative state-of-the-art projects to implement innovation in ICT and new emerging technology product solutions. Through increased research cooperation, collaborative projects and activities, duplication of effort is avoided and synergy is achieved.

g/s

48

Engineering design is determined by the client’s unique requirements. With professional engineering, intelligent management, efficient installation, innovative construction, testing, monitoring and other support services, the products, systems and services we develop have significant competitive advantages. The network products and solutions incorporate state-of-the-art and new technologies provided by engineers, experts and other professionals.

c/k

THYIA D.O.O

intensive research and prototyping activities under TITRES (Technology Innovation in Telecommunication for Rational Ecological Systems) project, and new embedded and smart metering systems (FP7 ARTEMIS projects pSHIELD and ME3GAS). In the area of emerging technologies, THYIA is facing up to the latest challenges in R&TD: FP7 projects (OMEGA, IMSK, ORPHEE) in various fields such as future intelligent home networks and civilian and military sensor networks with an enormous number of nodes that will be used for surveillance and other military applications. The company is working on the latest C4ISR development for networks and systems. In the area of national military networks for MoD Republic of Slovenia, THYIA is actively working on the development of new network elements jointly with other national and European partners.

Areas of expertise: • GSM/GPRS/EDGE, UMTS, IPv4 & IPv6 • TETRA & TETRAPOL • C2, C3, C4ISR • RF & Microwave Technologies • Beyond 3G, 4G Technologies • WiFi, WiMax, OFDMA, xDSL, DVB • Bluetooth, UWB, ZigBee • PAN, LAN, WAN • Wireline & Wireless Communications • Software & Hardware Architectures • P2P communications • Middleware, Protocol Stack • Surge Protection Devices • Lightening Protection Systems • MIMO • EMC, EMI • Software Defined Radio • Risk Management Platform • Homeland Security • Ad hoc & Mesh networks • Security, Thrust, Privacy issues • Encryption • Pervasive, Ubiquitous Computing • Sensors and Biosensors • Sensor Networks • Standardization: ETSI, 3GPP, ITU

Wireless Grid is a one of our key R&TD strategic goals. Developing new services and applications for mobile users is a challenging area of research that we would like to share with our customers and partners. The Wireless Grid system includes P2P Computing and Web services, ad-hoc and wireless networking that should offer an adaptive network offering secure, inexpensive, and coordinated real-time access to dynamic, heterogeneous resources, potentially traversing geographic, political and cultural boundaries, while still maintaining the desirable characteristics of a simple distributed system, such as stability, transparency, scalability and flexibility. THYIA offers powerful outsourcing and cost-effective facilities through its own network of researchers, professionals and students. THYIA’s clients gain competitiveness by close collaboration with our experts, who have many years of experience in R&TD (Research & Technology Development). We are very active in many international committees and forums. With our world reputation in the fields of our expertise, THYIA’s clients receive excellent support in all aspects of R&TD projects. Thyia’s message: Sharing our expertise, knowledge and experience is a route to advanced and innovative R&TD projects that are your primary interest today or in the near future. We are open to collaboration in joint projects or as a partner in your project. Call us to discuss opportunities for collaboration.

49

TRIVAL ANTENE D.O.O. Tival antene d.o.o. Bakovnik 3 SI-1241 Kamnik T: +386 1 831 43 96 F: +386 1 831 33 77 E: [email protected] W: www. trivalantene.si

TRIVAL ANTENE d.o.o. main activities are: • development and production of antennas, masts and accessories for wireless telecommunications; • development, engineering, project-making and consulting in the field of wireless telecommunications TRIVAL antennas made of composite materials (polyester and epoxy resins reinforced with fibreglass) were first produced back in 1965, on the premises of the SVIT Kamnik company. Today Trival Antene d.o.o. has on its list more than 200 different types of antennas, antenna masts and accessories. Apart from military items, the company supplies products for civil professional use (marine applications, industry and organisations, ministries, radioamateurs, mobile comm’s, etc.)

TRIVAL Co. products are subdivided as follows: • military antennas (HF, VHF and UHF antennas, stationary, tactical and mobile antennas), • antennas for marine applications (MF, HF and UHF antennas for vessels and yachts), • antennas for civil-professional communications (HF, VHF and UHF antennas, stationary, mobile antennas and antennas for hand-held radios, omnidirectional di pole and co-linear antennas, directional yagi and log-period ic antennas), • antenna masts (tubular sectionalised and winch driven telescopic glass-fibre masts from 5 to 18 m) • antenna accessories (cables, connectors, etc.), • custom designed antennas (antennas for EMC measurements, etc.)

50

Antennas The TRIVAL company develops and produces military antennas in HF, VHF and UHF frequency range for tactical transportable, mobile or stationary use. The antennas are whip-type monopoles, omni-directional or directional antennas (yagi or log-periodic type). They are usually made of composites (epoxy or polyester, glass-fibre reinforcement), with stainless steel metal joints. All antennas for military use comply with MIL-STD-810F.

Antenna masts TRIVAL antenna masts may be divided into two types: tubular sectionalised and telescopic winch driven masts. All masts are made of composite materials, up to 18 metres high. All mast types are intended for tactical use with included - guying accessories kit. Telescopic masts are also suitable for mobile use (including mounting kit accessories).

VEPLAS D.D. Veplas d.d. Cesta Simona Blatnika 11 SI-3320 Velenje T: +386 3 898 58 00 F: +386 3 898 58 30 E: [email protected] W: www.veplas.si

We are an Enterprise with more than 50 years of history and the biggest composite materials producer in region. An important part of our production program is a ballistic protection program, which includes the following products: • ballistic helmets • antiriot protective police helmet • bullet-proof vest • hard armor plate for vests • ballistic shields • antiriot shields • ballistic plate for vehicles To achieve the best possible combination of lightweight, ballistic resistance and maximum comfort, Veplas uses different fibers (aramid, PE, Carbon, ...) and matrix systems.

antiriot protective police helmet

ballistic military helmet

Veplas R&D department brings new materials (nanomaterials, ...) and technical solutions into production process to increase quality level of ballistic protection. We are a producer of lever plates for armored and other vehicles. Plates are made from various ballistic materials of various thickness and various protection. Plates can be cut according to customer’s demands (we use 3D water-jet). We can mould not only the plates but also 3D shapes.

hard armor plate for vests

bullet-proof military vest

ballistic plate for vehicles

bullet-proof police vest

51

VEPLAS D.D.

As an aerospace, military and avtomotive industry supplier, we constantly improve our processes. Our technological capacities include the following technological procedures: • Automatic Cutter for 2D material cutting • Resin transfer moulding (RTM) with derivatives VARTM - Vacuum Assisted Resin Transfer Moulding; VI - Vacuum Infusion; RI - Resin Infusion; RFI - Resin Film Infusion; BVARTM - Blow Vacuum Assisted Resin Transfer Moulding • Bag Moulding (BM) with derivative BBM -Blow Bag Moulding • Hand Lamination And Spraying • Sandwich Technologies • Filament/Pool Winding for tubes • Autoclave • Clean Room (monitoring of surroundings) • A Robot to apply gelcoat • 3D Water Jet (cutting ages) • thermal pre-processing and post-processing of metal ( treatment furnace) • deep drowing of metal (press 1000t) • tool making (production of models, moulds and other tools for production of composite materials)

3D water jet cutter

Autoclave

Please, visit our website www.veplas.si for a comprehensive presentation of our company – welcome!

Robot to apply gelcoat

furnace for heat treatment

52

hydraulic press 1.000t

2D cutter

VIMAR d.o.o. Vimar d.o.o. Mednarodni prehod 6 SI-5290 Sempeter pri Gorici T: +386 40 980 000 F: +386 5 393 2484 E: [email protected] W: www.awt.si

EMERGENCY WATER MAKERS Compact Mobile Water Filtration Systems suitable for drinking water production from any water source such as rivers, lakes, rainwater basins and groundwater.

Mobile Systems can purify microbiologically and chemically affected water to attain drinking water levels.

• Military Field Applications • Potable Water for Disasters • Emergency Water Supply

Nato Stock Number: 4610-42-0000085

53

CHAMBER OF COMMERCE AND INDUSTRY OF SLOVENIA

The Chamber of Commerce and Industry of Slovenia - CCIS • With over 150 years of tradition, voluntary membership, and by far the largest number of members, the CCIS is the most influential business association in Slovenia • Offering the collective wisdom and rich experience of more than 100 experts and specialists • Uniting commerce, industry, tourism and service sectors in Slovenia • As a member of Eurochambres and the ICC, as well as other international associations and organisations, the CCIS is part of an extensive international network with innumerable contacts • References and experience in the realisation of EuropeAid programmes such as Asia Invest, AL Invest, Gateway to Japan, Executive Training Programme for Japan and Korea…

At Your Service Chamber of Commerce and Industry of Slovenia – CCIS Dimičeva 13, SI-1504 Ljubljana, Slovenia T: +386 1 5898 000, F: +386 1 5898 100 E: [email protected] W: www.gzs.si/eng Our staff are at your service and will provide you with all the information you need!

SLOVENIAN DEFENCE INDUSTRY CLUSTER

SLOVENIAN DEFENCE INDUSTRY CLUSTER Grozd obrambne industrije Slovenije (GOIS) The Slovenian Defence Industry Cluster (Grozd obrambne industrije Slovenije – GOIS) is a business association based on the economic interest of our members. It was established in 2008 and brings together Slovenian suppliers of defence, security and protection products and services. The Cluster assists its members with the creation of optimal conditions for the research, development, production, testing, maintenance, trade and marketing of their products and services in the areas of defence, security and protection. We offer services such as the following: • Promoting Slovenian defence & security industries in Slovenia and abroad. • Promoting and creating opportunities for the international cooperation of Slovenian companies. • Assisting via cooperation with international defence & security industries and their associations. • Assisting foreign companies when seeking to establish contacts with Slovenian companies. • Assistance and consulting services for offset obligors.

GOIS Slovenian Defence Industry Cluster Dimičeva 13, SI-1504 Ljubljana, Slovenia T: +386 1 5898 418, 5898 423 F: +386 1 5898 400 E: [email protected] W: http://giz-gois.si

Slovenian Defence Products Published by: Slovenian Defence Industry Cluster Editor: Jože Renar, Photographs: Archives, Bruno Toič and Emil Jalovec, MORS Design and Layout: CCIS, Printed by: Tiskarna Formatisk d.o.o.

Slovenian Armed Forces www.slovenskavojska.si

Photographs: Bruno Toič and Emil Jalovec, MORS

Ministry of Defence Republic od Slovenia www.mors.si

Photographs: Bruno Toič and Emil Jalovec, MORS

Slovenian Defence Products

GOIS Slovenian Defence Industry Cluster Dimičeva 13, SI-1504 Ljubljana, Slovenia T: +386 1 5898 423, F: +386 1 5898 100 El: [email protected], W: http://giz-gois.si

www.mo.gov.si

Photo: Bruno Toič

FOREWORD

LONG INDUSTRIAL TRADITION, QUALITY AND INNOVATION The Slovenian defence industry is based on a long Slovenian industrial tradition, engineering knowledge and mastery of craft. Strong export orientation, investments in knowledge, new technologies and the implementation of international standards have all shaped Slovenian industry in the last few decades. The country’s main export markets are the EU, SouthEast Europe and other world markets. The production of military weapons and equipment is part of a tradition lasting several hundred years in the territory of Slovenia. The well-renowned Slovenian precision and craftsmanship are reflected in Slovenian defence products that are distinguished by the inclusion of their own know-how, highest quality, innovation and optimal performance-to-cost ratio. Since joining NATO in 2004, interoperability and compliance with NATO standards have become the guiding principle of the development of new defence production programs in Slovenia. The cooperation among Slovenian enterprises, universities and research institutes records a constant growth. The close collaboration of the companies with the Standardisation, codification and quality assurance department of the Ministry of defence of Slovenia keeps the production of armaments and military equipment in accordance with up to date NATO AQAP series standards and manages product quality assurance during their life cycle. The catalogue presents diverse products and services. From solder equipment, handguns and light arm parts, ammunition, explosives storage and manipulation, CBRN defence, battlefield management, border control, telecommunication, unmanned systems, to diverse special technologies and engineering.

Trading in defence equipment in Slovenia is regulated by the Law on Defence and other legal acts requiring the producers of military weapons and equipment to register with the Ministry of Defence of the Republic of Slovenia. There are several ways potential customers can contact the Slovenian producers of defence equipment, including by contacting the national defence industry association Slovenian Defence Industry Cluster. This publication was prepared by the Slovenian Defence Industry Cluster (GOIS) in cooperation with the Chamber of Commerce and Industry of Slovenia and the Ministry of Defence of Slovenia. It represents Slovenian companies which provide high quality products and services in the areas of defence, security and protection.

You can obtain more information about the Slovenian defence industry from: GOIS Slovenian Defence Industry Cluster Dimičeva 13 1504 Ljubljana Slovenia T: +386 1 5898 423 F: +386 1 5898 100 E: [email protected] W: giz-gois.si

3

Products and services

Company

1. Soldier Equipment

ALPINA d.o.o. ANTHRON d.o.o. AREX d.o.o. MIL SISTEMIKA d.o.o.

2. Ammunition and Explosives

AREX d.o.o. IZOP-K d.o.o. SEANTECH L.t.d.

4

Page 7 8 9 36 9 34 39

3. Armaments and their parts

AREX d.o.o.

9

4. Gun stabilization amplifiers

VR-ELEKTRONIKA d.o.o.

44

5. Border monitoring systems and mobile surveillance systems

DAT-CON d.o.o.

15

6. Command and Control Systems

MIL SISTEMIKA d.o.o

36

7. Chemical Biological, Nuclear protection (CBRN)

EM.TRONIC d.o.o. ISKRA PIO d.o.o.

18 27

8. Lifting systems for military and civil logistic

BIJOL d.o.o.

11

9. Small unmanned systems (UAS/UAV)

C-ASTRAL d.o.o.

13

10. Chemical Biological, Nuclear protection (CBRN) EM. TRONIC d.o.o.

18

11. Laboratory Equipment

DOMEL d.o.o. EM.TRONIC d.o.o. ISKRA PIO d.o.o.

17 18 27

12. Engineering Modelling and Design

UNIVERSITY OF LJUBLJANA , FACULTY OF MECHANICAL ENGINEERING

22

13. Special production technologies

FERROČRTALIČ d.o.o. SEANTECH L.t.d. ISKRA PIO d.o.o.

25 39 27

14. Special Purpose Vehicles

BIJOL d.o.o.

11

15. Telecommunication systems

ISKRATEL d.o.o. S-TMM SISTEMI d.o.o. TRIVAL ANTENE d.o.o.

32 41 43

TRIVAL ANTENE d.o.o.

43

S-TMM SISTEMI d.o.o.

41

16. Special yarns of high performance fibres

PREDILNICA LITIJA d.o.o.

38

17. Training Aids and Devices

EM.TRONIC d.o.o.

18

18. Cryogenic coolers for IR systems, Stirlig motors

LE-TEHNIKA d.o.o.

35

19. Electric protection equipmnent

ISKRA ZAŠČITE d.o.o.

30

20. Mobile water purification systems

ARTOS GROUP d.o.o.

10

21. Explosives management, storage, testing and disposal

IZOP-K d.o.o.

34

22. Equipment for propellants production

SEANTECH L.t.d.

39

ALPINA d.o.o.

7

ANTHRON d.o.o.

8

AREX d.o.o.

9

ARTOS GROUP d.o.o.

10

BIJOL d.o.o.

11

C-ASTRAL d.o.o.

13

DAT-CON d.o.o.

15

DOMEL d.o.o.

17

EM.TRONIC d.o.o.

18

UNIVERSITY OF LJUBLJANA, FACULTY OF MECHANICAL ENGINEERING

22

FERROČRTALIČ d.o.o.

25

ISKRA PIO d.o.o.

27

ISKRA ZAŠČITE d.o.o.

30

ISKRATEL d.o.o.

32

IZOP-K d.o.o.

34

LE-TEHNIKA d.o.o.

35

MIL SISTEMIKA d.o.o.

36

PREDILNICA LITIJA d.o.o.

38

SEANTECH L.t.d.

39

S-TMM SISTEMI d.o.o.

41

TIVAL ANTENE d.o.o.

43

VR-ELEKTRONIKA d.o.o.

44

CHAMBER OF COMMERCE AND INDUSTRY OF SLOVENIA

45

GOIS SLOVENIAN DEFENCE INDUSTRY CLUSTER

45 5

DEPARTMENT OF DEFENCE REPUBLIC OF SLOVENIA

MINISTRY OF DEFENCE OF THE REPUBLIC OF SLOVENIA carries out activities to support Slovenian defence industry and research and development institutions. It relates them to allied activities in the fields of manufacturing, research and development, the use of European and NATO standards, quality assurance and codification of products.

Activities of the Ministry of Defence in the field of ​​research and development: • It provides long-term support for capability goals of the Slovenian Armed Forces and development of new findings to contribute to a more efficient system of protection and rescue. It encourages scientific excellence in Slovenian scientific institutions. The results are usually not intended only for military use, but are also useful in the wider society. Dual use means that the results are useful for both military and civilian purposes. • In invests international efforts within the EU and NATO in priority scientific areas identified by the NATO Organization for Science and Technology and the European Defence Agency. The Ministry of Defence, therefore, encourages the development of scientific excellence, which in the long term contributes to increasing the capacity of the Slovenian Army and the protection and rescue system in areas that are important for the Republic of Slovenia in the broader social context.

Activities of the Ministry of Defence in the field of standardization, codification and quality: • It manages the standardization process in the defence system; issues Slovenian military standards; keeps record of Slovenian military standards and NATO standards; ensures their distribution to the internal professional public, government bodies and the industry. • It represents the national authority of the government of quality assurance in the life cycle of armaments and military equipment in accordance with NATO standards series AQAP (Allied Quality Assurance Publications). It acts as a proxy for the implementation of acquisitions for the needs of other NATO member states and conducts audits of quality systems according to NATO standards of the series AQAP (Allied Quality Assurance Publications). • Represents the National Codification Bureau within NATO; codifies products of Slovenian manufacturers (assignment of NSP - NATO Stock Number); assigns NATO codes of Slovenian manufacturers (NCAGE assignment) and maintains a database of all codified means of supply of the Slovenian Armed Forces.

The Ministry of Defence also issues import, export and transit permits and authorisations for the transfer of defence-related products, and arranges registration of defence producers and traders in the Republic of Slovenia. Ministry of Defence Vojkova cesta 55 SI-1000 Ljubljana 6

W: www.mo.gov.si E: [email protected]

www.alpina.si www.alpinasports.com [email protected] T: +386 4 5158000 F: +386 4 5158370

Military footwear

Technology on a mission

Alpina is a Slovene company with more than 65 years of tradition in development, manufacture and marketing of footwear. The brand Alpina is a guarantee for high quality manufacture, innovative solutions and user friendly design.

Work in army offers challenges along with harsh conditions and even accidents - untamed nature and hazardous areas are all hostile environments for a gentle, unprotected human foot. Under such conditions each day poses countless conflicts between the vulnerable nature of a foot and the demanding forces surrounding it. ALPINA develops shoes that intervene in these conflicts as an ever-present, flexible, and caring force with one mission to accomplish: to help complete the mission while keeping feet safe and satisfied.

The wealth of experience in footwear production and development has been applied also to the manufacturing of military boots. Alpina has been supplying the Slovene armed forces with military boots from very beginning and has been keeping up with the requirements and trends of a modern military. Systematic testing and high-tech development have enabled Alpina to develop high quality military footwear that meets the strict requirements and trials that a modern military force is subjected to.

ALPINA D.O.O.

Alpina d.o.o. Strojarska ulica 2 SI-4226 Žiri

Carefully selected materials, anatomically designed footbed, firm rubber sole and protective toe cap insure extreme rigidity and comfort at the same time.

7

ANTHRON D.O.O.

Anthron d.o.o. Trgovska ulica 3 SI-6310 Izola

T: +386 5 64 00 150 F: +386 5 64 00 151 E: [email protected]

Anthron is a small family owned company specialized in producing quality rope access and rescue equipment. The idea for the company sparkled in the wake of the 1977 earthquake when the founder Mr Jože Lorbek pondered about efficient rescue systems for safe mass evacuations from high-elevation buildings. The original idea still represents the stance of the company’s orientation and rope access and rescue be it at work, sport or combat are at the heart of its strategic orientation. On one hand it supplies the global market with its standard products that span the range from descenders, rope clamps to an array of pulleys. On the other hand being small makes the company more flexible in responding to the needs of customers seeking equipment tailored for their specific applications.

The company holds representation for a number of worldwide sectorial producers such as: CMC Rescue, Bornack, Act Safe, Climbing Technology, Honeywell, Rock Exotica, Singing rock, Cresto and others.

8

In collaboration with special forces an intervention-centred descender DSDpro was developed and offered along with carefully chosen materials in a kit. It is the only descender on the market that can be fully operated with one hand only. Contrary to most double stop descenders the press-stop function is emphasized making it operationally more intuitive and its gentle yet extremely strong grip on the rope means no creep. These features coupled with a strudy design, abrasion resistance and a ruberized finish make it virtually indestructible and make stealthy movement possible.

T: +386 7 393 34 50 F: +386 7 393 34 51 E: [email protected] W: www.arex.si

AREX D.O.O.

Arex d.o.o. Trubarjeva cesta 7 SI-8310 Šentjernej

FORGED BARREL PRODUCTION PLASTIC BLANK AND DRILL AMMUNITION

METAL LINKS FOR NATO CALIBERS

NLA PLASTIC AMMUNITION

MILITARY AND LAW ENFORCEMENT 9MM HANDGUN

9

ARTOS GROUP D.O.O.

Artos Group d.o.o. Beethovnova 12 SI-1000 Ljubljana

Artos Group manufactures mobile water purification systems suitable for every water source (eg. lakes, rivers, seas). Water purification technology is based on two different principals of filtration: Ultrafiltration and Reverse Osmosis. These two methods provide clean and safe water, which is compliant with the strictest STANAG and WHO standards. Along with custom made solutions, we are curently present in the market with two standard EWM models and RO Hybrid solution.

T: +386 (0)1 200 17 70 F: +386 (0)1 200 17 72 E: [email protected] W: www.artos.si

EWM 1500 and EWM 4000 tehnical features CAPACITY [l/h] WEIGHT [kg] DIMENSIONS [cm] OPERATING PRESSURE POWER CONSUMPTION POWER TERMINAL [standard]

EWM 1500

EWM 4000

1.500

4.000

77

320

66 x 80 x 50

169 x 70 x 156

3 bar (300 kPa) 3 bar (300 kPa) 0.9 kW / h

1.6 kW / h

230 V / 50 Hz

230 V / 50 Hz

Distinguished quality features: • High capacity • Heavy duty design • Easy portability and mobility • Low operating costs • Energy eficiency • Chemical free technology • Automatic washing of the operation system • Simple use and maintenance EWM 1500 - has been proven an excellent solution in crisis situations.

10

RO Hybrid 4000 - system which combines two membrane processes: Ultraltration and Reverse Osmosis.

EWM 4000M - high capacity mobile on-eld solution.

Serbian Armed Forces using EWM in May 2014 when their country was hit by the worst floods the last 120 years.

EWM 1500 successfully implemented at Floods Carinthia Drill.

Company Bijol d.o.o. was establish in 1996, with the main activity of representing, assembling and servicing cranes of the company Palfinger GmbH. Today the company employs 30 full-time employed workers and some contract workers.

T: +386 2 8790 156 +386 2 8790 157 F: +386 2 8790 158 M: +386 41 614 345 W: www.bijol.si E: [email protected]

BIJOL D.O.O.

BIJOL d.o.o. Livarska cesta 17 SI-2367 Vuzenica

First project for Slovenian army was relatively large; it consisted of assembling 48 container handling systems Palfinger Palift on the trucks Mercedes Benz.

PALIFT hook loader on Mercedes-Benz Headquarter of the company

Company Palfinger with headquarters in Salzburg, Austria is well known manufacturer of lifting-loading equipment. Palfinger’s loading technology is powerful because of its excellent kinematics and geometry of mobility. Palfinger’s products are improved again and again with numerous patents and innovations, so that the company has proven itself and gained an important role as an innovator in the development of lifting techniques. The largest share in the firm’s business have truck mounted knuckle-boom cranes Palfinger and timber and recycling cranes Palfinger Epsilon. The company’s program also consist of tail lifts, aerial work platforms, container handling systems, transportable forklifts, for special transport dedicated trailers and also for the needs of army. Among mentioned Palfinger Company, Bijol d.o.o. also represents other companies such as Doll, Exte, Stepa, Huffermann, Sennebogen …

This project was followed by number of others such as, purchasing knuckle-boom cranes with baskets for decontamination of vehicles, purchase of special transportable forklifts Palfinger Crayler and also radar systems for which the basics of hydraulic lifting and descending was constructed and manufactured in company Bijol d.o.o. The cooperation between Slovenian Army and Bijol d.o.o., was not closed with those projects. The company still provides regular services and maintenance. Company Bijol has relatively large range of activity, so each customer from this technical field can find something suitable. Company’s staff listens to their customers, advise them and offer quick and efficient services

In 2004, the company Bijol d.o.o. gained first business for the Slovenian army on the public competition in cooperation with company Dumida d.o.o. Within that year a new assembly-services workshop specifically for projects in the military industry was built. In 2006 the company also renovated other production facilities and built new offices.

11

BIJOL D.O.O.

Our references from Military program:

PALIFT load handling solutions Working basket for Decontamination system

Hydraulic system for mobile radar Crayler forklift for military applications

12

Loader crane

Recovery vehicle with two winches and semi-trailer

Loader crane

Loader crane on the Military ship

C-Astral is an aerospace enterprise and solution provider based in Ajdovscina, Slovenia, the “hub” of advanced aerospace development and integration in this part of the world. The company is one of the market leaders in the small unmanned systems (UAS/UAV) and services field and has a global presence, a robust research and development program and advanced integration/customization capacities. The company is built around the fields of expertise and practical experience in aerospace, unmanned systems, electronics and sensor development, aerial based surveying and processing, remote sensing, telecommunications, renewable energy systems and extreme environment autonomous habitats and communications.

E: [email protected] W: www.c-astral.com

C-ASTRAL D.O.O.

C-ASTRAL d.o.o. Gregorčičeva 20 SI-5270 Ajdovščina

C-Astral operates a software and hardware laboratory for aerodynamics and systems integration work and a prototyping CAD/CAM workshop facility for composite and metal materials work, modeling and systems integration. The founders of C-ASTRAL have been active in renewable energy systems integration and habitats work since 1994 and in aerospace since 1999 and are responsible for the first Slovenian Unmanned Aircraft System test flight in 2005 with the Spectral System platform. C-Astral is your dynamic aerospace and unmanned systems partner with systems operational, generating revenue and flying on all continents, including Antarctica and over the Arctic.

13

14

C-ASTRAL D.O.O.

T: +386 3 7033 300 F: +386 3 5720 408 E: [email protected] W: www.dat-con.si

With its specialized military and police equipment, the company Dat-Con has successfully established itself in the European market. Specialized knowhow and experience enable the company to adapt to the customers’ requirements and demands quickly and efficiently.

With its outstanding and efficient state border monitoring system, the company has successfully completed a series of different projects in the international market.

Mobile surveillance systems

BOPAS Portable Border Patrol System

We have more than 20 years of experience with the integration of different mobile observation systems in line with end-user demands. Because of their normal appearance do not stand out from other vehicles. This can provide very significant advantages in special undercover operations. Observation systems allow police, security or coast guards to control and observe different areas like borders, ports or certain events and help to prevent different crime, increase safety and enable easier observation… The systems are flexible and allow a great variety of activities.

The remote operating system consists of various items of equipment that enable the manual or automatic monitoring of an observed sector, the localisation of objectives and recording of video sequences from observations made with infrared binoculars. BOPAS supports multisensory camera systems (Thermal, Day, Laser Range Finder, GPS and Compass). All telemetric data from the camera can (optionally) be observed and transferred from BOPAS to other systems.

DAT-CON D.O.O.

Dat-Con d.o.o. Cvetlična ulica 52 SI-3313 Polzela

15

DAT-CON D.O.O.

DC PT Systems The company DAT CON has developed different pan tilts – DC PT systems that are suitable for a variety of uses and integrations adapted to customer needs. DC PT systems deliver high performance and gyro stabilisation for loads up to 100 kg. Their light weight and compact size makes them ideal for mobile solutions. Their high power to weight ratio distinguishes them from the competition. The positioning accuracy of high precision models is better than 0,2 mrad with moving speed up too 200˚/s. All systems are IP67 approved to make them suitable for all weather conditions. The mechanical assembly kit and software package can be fully customized to meet customer specifications. A special version has 3 platforms suitable for a combination of cameras and radar all integrated into a single telescopic mast to avoid having any dead zone in the observation area. Different versions have been in daily use at Schengen border – 24/7 for over 10 years.

16

T: +386 4 5117 500 F: +386 4 5117 501 E: [email protected] W: www.domel.com/products/ laboratory-equipment

DOMEL, D.O.O.

Domel, d.o.o. Business Unit Laboratory Systems Otoki 21 SI-4228 Železniki

Laboratory Equipment for Field Hospitals and Analytical Laboratories Domel, Business Unit Laboratory Systems has been producing laboratory equipment for more than 60 years. We are a well known producer of centrifuges, cooling centrifuges, cyto-centriufges, orbital shakers, reciprocal shakers, shaking incubators, mini heating incubators, mini cooling incubators, heating stirrers, water bath and bead beater - homogenizers. Domel has supplied laboratory equipment to partners of United Nations. High quality equipment meets international quality standards ISO 9001, ISO 13 485 and ISO 14001. Universal Centrifuges are designed to be used in medical, industrial and scientific laboratories to separate substances with different relative densities by centrifugal force. The maximum rotational speed of 18.000 RPM gives the centrifugal force of 30.000 x g. A wide range of programming options and an electronic operation control allow a trouble-free usage of the centrifuge. With a special drive, quiet maintenance-free operation without any carbon dust pollution is guaranteed. Homogenizer - Bone & Teeth Grinder – Ball Mill Bead Beater Mill Mix 20 is a useful tool for disintegration of many materials and can be used in different fields of science: microbiology, biotechnology, medicine, veterinary, analytical chemistry, geology, metallurgy. During the last period we have developed methods and applications used in forensic science. Methods can be applied in the following cases: identifications of persons in mass graves, in natural disasters, identifications of persons in such accidents where there is no tissue remaining.

17

EM.TRONIC D.O.O.

em.tronic projektiranje, razvoj, proizvodnja in trgovina elektromehanskih sistemov d.o.o. Počehova 12 SI-2000 Maribor

CBRN RECONNAISSANCE VEHICLE

for Nuclear, Biological and Chemical detection NSN 6640-420000945 CBRN reconnaissance vehicle system has been designed for Chemical, Biological, Radiological and Nuclear reconnaissance. The system offers a fully integrated and automated CBRN reconnaissance suit, controlled by central computer/s and operated by the vehicle crew.

T: +386 2 4502028 F: +386 2 4502020 E: [email protected] W: www.em-tronic.si

AUTOMATED CREW PROTECTION CAPABILITY: • Air monitoring inside the vehicle (CO2 and O2 level monitoring); • Chemical detection and air monitoring inside the vehicle (including the NBC filter break-through surveillance). Detection of CWAs and TICs; • Real-time nuclear radiation monitoring in the vehicle for crew protection.

It provides automated crew protection capability and measuring instruments for CBRN detection and identification, systems for visual reconnaissance, and remote (stand-off) chemical detection. The system enables integration onto a suitable vehicle platform.

CBRN RECONNAISSANCE SYSTEM CAPABILITIES:

This configuration enables detection and identification of Chemical Warfare Agents (CWA), Biological Warfare Agents (BWA), Toxic Industrial Chemicals (TIC), and complete spectrum of other toxic releases (ROTA). All data acquisition and processing is automated. Reports are sent in NATO standardized mode.

18

• Nuclear detection - area and ground contamination monitoring from the vehicle; • Chemical detection and outside air monitoring (CWA and TIC detection); • Biological detector - provides continuous and real time BWA detection capability (biological or aerosol type changes in the atmospheric background); • Remote (stand-off) infrared chemical detection. Automatic, real-time monitoring of all known CWAs and important TICs - up to a distance of 5km - stationary or on the move. Complete 360° coverage, elevation angle from -10° to 50°; • Sampling System - fully automated and remote controlled sampling system for collection of samples from within the protected environment of the vehicle. Collected samples are sealed in containers and stored outside the vehicle for further analysis;

The system has been extensively tested and approved by relevant (NATO) authorized test facilities.

EM.TRONIC D.O.O.

CBRN integration can be performed on any armored vehicle platform.

• Marking System – automated, operator controlled marking system for contaminated areas;

ADVANCED CAPABILITIES:

• Meteorological station - providing all required meteorological data to the system; • Central computer system and MFD Displays for the operation and control of all data collected from sensors inside and outside the vehicle; • CBRN Software – fully integrated CBRN software system for the operation and control of sensor systems, data acquisition, alarm monitoring and reporting; • GPS receiver – integrated GPS receiver ensures constant position information and precision guidance capabilities; • Laser threat detection and warning system - protecting against laser associated weapon threats;

• Chemical identification - Mobile Mass Spectrometer with air-surface probe, gas chromatograph and surface sampler providing identification capability from any medium (soil, water, air); • Sampling wheels for ground surface sampling and detection/identification capability on the move; • Visual reconnaissance systems (day and night observation capabilities) and weapon systems; • Portable detection instruments; • Communication systems with required comm. software.

Entire integrated CBRN detection system with instruments, equipment, hardware and software support can be further customized to fit specific needs and demands of the customer. 19

EM.TRONIC D.O.O.

STAND ALONE – N.B.C. DEFENCE DETECTION SYSTEM NSN 6665-420000599

Stand Alone is a detection system for N.B.C. defense, for observing and protecting important buildings, for protecting people against possible N.B.C. attack with weapons for mass destruction.

Instruments for Chemical Warfare Agents (CWA’s) detection, Biological Agents detection and Radiological detection are integrated in the measuring equipment case. A meteorological station is used for measurement of wind speed, wind direction, humidity, air temperature and atmospheric pressure. Compass is integrated in meteorological station and is used for measuring wind direction according to North. GPS determines Latitude and Longitude of placed system in the field.

Independent Stand Alone Units are placed on the field and automatically send data to the Control Station for N.B.C. monitoring. Stand Alone Unit consists of two cases. A battery is integrated in the power supply case and takes care for autonomous operation of the unit.

Rugged computer with software interface enables instrument control and data transmission over radio to the Control Station. Control Station enables on-line monitoring and visualization of Stand Alone Units, visual and audio alarms, saving alarm events into database and sending NATO standardized ATP-45 messages.

20

EM.TRONIC D.O.O.

DEPLOYABLE CHEM / BIO LABORATORY

CHEMICAL LABORATORY NSN 6640-420000945 BIOLOGICAL LABORATORY NSN 6640-420000948 Deployable CHEM / BIO Laboratory is designed for de­ tection and identification of Chemical Warfare Agents (CWA), Toxic Industrial Chemicals (TIC) and Biological Warfare Agents (BWA). Laboratory combines functionality, efficient use of space, flexibility with BSL-3 containment and capability for fast on-site diagnostics. In the case of at­tack with weapons for mass destruction a rapid and effective response with correct identification is extremely important. Crew consists of CBRN detection operator, chemical and biological analyst. System enables detection and identification of Chemical Warfare Agents, Biological Warfare Agents and radiation monitoring inside and outside the vehicle.

MOBILE CBRN LABORATORY Mobile Laboratory is an integration of a MAN truck and container, which is fixed to the vehicle. Container is made of insulating material and divided in three compartments: engine room, entrance and laboratory. The laboratory is air-conditioned and pressurized.

Filtration and overpressure sys­tem protects against CBRN agents. Positive pressure assures clean air in the laboratory as well as the negative pressure in glove box assures clean and safe working environment.

Chemical analysis with Mobile Mass Spectrometer, air-surface probe and gas chromatograph provide identification capability from any medium (soil, water, air). Biological detection enables automatic start of air sampling for further PCR analysis inside glove box.

The CBRN mobile laboratory can be further customized to fit specific needs and demands of the customer.

21

FAKULTETA ZA STROJNIŠTVO

Univerza v Ljubljani, Fakulteta za strojništvo, Katedra za modeliranje v tehniki in medicini Aškerčeva cesta 6 SI-1000 Ljubljana

The members of the Chair of Modeling in Engineering Sciences and Medicine (CmESM) have contributed to a number of R&D projects and tasks together with other chairs and laboratories from the Faculty of Mechanical Engineering at the University of Ljubljana, and with partners from Slovenian and foreign companies and institutional partners. Members of the chair specialize and are competent in different fields of mechanical design: geometrical modelling (3D CAD), technical documentation, GDT, tolerance stack analysis, sensitivity analysis, finite element model (FEM) analysis and simulation, material models, multibody systems analysis, mechanisms, mechanical elements design and analysis (rolling bearings, gears, bolt connections, etc.), vehicle theory and dynamics, several areas of computer simulation, and mechanical experimental techniques.

T: +386 1 4771 200 F: +386 1 2518 567 W: www.fs.uni-lj.si W: kmtm.fs.uni-lj.si E: [email protected]

Blast loading experiments are among the most expensive because of their harsh environment and a large number of experts involved in the tests. In some cases, very strict safety requirements and additional governmental permissions are needed, making the numerical approach the only reasonable and valuable tool for examination. Blast response of structures is of great importance in military applications. However, civil and governmental structures are becoming more exposed to blast loads as a result of increased possibility of terrorist attacks, especially in the last two decades. Whatever the structure under investigation, a blast loading model should be verified first in order to be successfully used for examination. For that purpose, we have developed very powerful and sophisticated numerical models for advanced analyses, which can be used for examination of mechanical as well as civil structures.

Finite element analyses of bullet plate perforation

We also have experience in modeling advanced higly nonlinear processes involving fracture initiation, its development and final size.

FEM response analyses of light armored vehicle (LAV) Valuk 6x6 under 6 kg TNT blast

22

Precise and accurate finite element (FE) analyses require precise material models as well as parameters of the materials involved in the process. Therefore, we also specialize in static, dynamic as well as fatigue material characterization for which advanced techniques such as acoustic emission as well as image analyses are used.

FAKULTETA ZA STROJNIŠTVO

Material characterization using image analyses technique

With the use of high-speed video cameras (FASTCAM Ultima 512), recording and comparison of many highspeed processes is possible.

FASTCAM ultima 512 – Instrumented Charpy test

Commercial as well as our own software tools enable formulation and application of mechanical and mathematical models of vehicles and assemblies thereof. Such models are applicable for simulations at different levels of complexity and speed of computation. We have developed a software tool i3Drive, which enables simulation of a wheeled vehicle ride on an arbitrary terrain. The i3Drive software tool is connectable to a haptic interface (active seat, active steering wheel) which provides the user with the feedback through the displacement of the seat or the force/moment applied on the steering wheel.

Geometrical and simulation model of a 6-wheel military vehicle (Valuk 6x6)

We also specialize in building and implementing detailed geometric, mechanical (MBS) and mathematical models of wheeled vehicles. Additionally, we carry out experimental validation of these simulation results.

Instrumented Charpy test vs. numerical result comparison

23

FAKULTETA ZA STROJNIŠTVO

We have also developed a module for the simulation of system dynamics based on the multi-rigid-body system approach which shall be widely applicable for the simulation of all elements of the human-vehicle-roadway system.

Analysis of the cervical spine dynamics at rear-end impact on a sled test device Geometrical models of the Slovene Military vehicles

Geometrical models of various vehicle types have been produced for the purpose of display in a virtual 3D environment. They are applicable for display in various software tools (commercial and our own developed ones). Numerical simulations based on the multi-body system (MBS) and the finite element method (FEM) are two types of computational methods used for simulating the human body response during traffic accidents or other mechanics loadings. Using these techniques, our research group has developed a MBS model of a human body that consists of interconnected body segments the relative movements of which are limited by resistive joint properties. Geometrical and mass properties of individual segments are determined through a CT scan with CAD reconstruction.

FEM of Human Neck and Torso with cervical vertebrae and intervertebral disc

24

Model verification and optimization were performed based on impact tests on a purpose-built sled test device. The model is robust and computationally efficient and hence appropriate for parametric analyses of critical traffic situations. Based on the determined load flow and injury criteria, the model can predict injuries to vehicle occupants and other road users for different traffic accident scenarios. The staff at the Chair of Modeling in Engineering Sciences and Medicine are interested in joint cooperation on various R&D projects in the aforementioned and related fields as part of bilateral cooperation with companies and institutions of interest as well as international project consortiums.

T: +386 (0)7 38 45 100 F: +386 (0)7 38 45 115 E: [email protected] W: www.ferroECOblast.com

FerroČrtalič

Defence solutions

Know-how which was gained through 50 years of family tradition, innovation, and excellence resulted in the world renowned reputation of our brand FerroECOBlast, under which we offer a diverse production programme, ranging from basic sand blasting to advanced automated and robotic systems.

With satisfying high level requirements alongside our dedication to constant research and development (inhouse laboratory and probably the largest shot peening cell in Europe) FerroČrtalič plays an active and indispensable role in the defence industry, where no mistakes are tolerated.

We are one of the leading companies worldwide in developing complex custom-made solutions, production machinery, and services in the most demanding sector of the surface finishing industry

Our highly skilled and certified engineers were able to overcome some of the most demanding challenges in the industry. Successfully providing complete solutions – from idea, testing, design, research, development, production, installation, training, and after sales activities.

Our solutions consist of: • Automated, robotised, and manual blasting (Sand/ Shot blasting) • Hardening the surface (shot peening) • Cleaning with dry ice & CO₂ snow blasting • Decontamination – UHP water cleaning and dry cleaning

IDEA & TESTING

RESEARCH & DEVELOPMENT

FERROČRTALIČ D.O.O.

FerroČrtalič d.o.o. Sela pri Dolenjskih Toplicah 47 SI-8350 Dolenjske Toplice

The most common solutions and services provided and specially designed for the defence industry: • Sand/Shot blasting of tubular forms like gun and cannon barrels, gun components, chassis – combat armoured vehicles, large calibre artillery shells… • Shot peening of landing gear, turbine blades and components, springs, chassis components, structural components, gear, shafts…

PRODUCTION & ASSEMBLY

INSTALLATION & TRAINING

AFTERSALES ACTIVITIES

Shot peening • Reliable & Endurable • Heavy Duty • Easy to Operate & Maintain • Fully Controlled Processing • Automated & Robotised Applications

25

FERROČRTALIČ D.O.O.

Sand/Shot blasting of tubular forms Modern day gun barrels are sophisticated in their construction and makeup. Specials materials and structures are needed for withstanding high pressures and stresses. For this kind of product to have a long life cycle and in order to withstand severe conditions of use, special outer coatings and surface preparation must be applied.

• External Sand/Shot blasting of tubular forms • Closed cabinet or trough-feed design • Workpiece rotation • Automatic nozzle manipulation • Parametric blast programming

External Sandblasting of gun components As we see in other segments of defence equipment, the same growing trend of high demands can be noticed with modern guns and similar types of equipment and components. Meaning that alongside quality prepared surface and achieved required standards of roughness for better adhesion of coating, it is also of great importance to achieve the appropriate final visual effect of parts in order to satisfy more and more demanding needs of the end-user, who is putting a lot of pressure on the industry so as to constantly achieve a better aesthetic look.

Shot peening is a well-known technology with which the surface of a part is bombarded with small spherical media called shot. Each piece of shot striking the metal acts as a tiny peening hammer imparting a small indentation or dimple on the surface, thus hardening the surface. This technology offers significant increases in part life, while protecting it against fatigue and stress corrosion. It is the most economical and practical method of ensuring surface residual compressive stresses. Our company employs four certified shot peening specialists, ensuring our esteemed business partners that we are always one step ahead.

26

Manual surface blasting in order to achieve correct roughness of the particular gun component • Simple design closed cabinet • Manual or Semi-automatic blasting • Ergonomic design for everyday

T: +386 7 39 31 400 F: +386 7 39 31 440 E: [email protected] W: www.iskra-pio.si

Iskra PIO is a progressive European company active in the clean and cleaning technology.

safely and effectively with chemical, biological or radiological hazardous materials.

We have 25 years experience in project development, engineering, production, validation and servicing of equipment.

Features

We are specialized in the producing and integration of laboratory equipment in to the mobile container laboratories, including glove boxes and microbiological safety cabinets.

CBRN mobile laboratory container The CBRN mobile laboratory container, from Iskra PIO is a fully equipped mobile laboratory used for the detection, analysing and identification of chemical warfare agents, toxic industrial chemicals, radiological and nuclear materials. Mobile laboratory will provide a workspace in which operators can work safety, regardless of the environment.

ISKRA PIO D.O.O.

Iskra pio d.o.o. Trubarjeva cesta 5 SI-8310 Šentjernej

• Laboratory is built into speciality 20 ft ISO shipping containers for easy global deployment , also it is self contained • HVAC systems and controls, including HEPA and NBC filtration • Glove box, from Iskra PIO, with under pleasure HEPA and carbon filtration, could be used for low level alpha an/or low level beta particle containment • Autonomous system for lift and lower on truck platform, with hydraulic legs • Electrical generator supplied approximately 96 hours on one tank of fuel • Thousand litres of onboard water • Sinks drain into holding tank for lateral disposal • Inner walls, floors and ceiling made from stainless steel sheets • Outer chassis is air tight, coated with pigmented polyurethane (CARC) coat • Eye wash station • Laboratory furniture • Laboratory material • Weather monitoring station • GPS tracking location system

Basic instruments for radiological laboratory • α, β aerosol, liquid and soil monitoring • high sensitivity Gamma Area monitoring • Gamma spectroscopy facility • Personal dose rate meters ...

Ultrasonic cleaning equipment

It can be deployed/pre-positioned where there is a risk of radiological, biological or chemical terrorism or to support public health missions such us influenza outbreak or natural disaster response. It will provide military units and first responders with a facility for emergency response, where they have the use of laboratory equipment, including Class II and Class III Biological safety cabinets, pass-through containment boxes and analytical equipment essential for working

Ultrasonic cleaning technique is an efficient one because of the fact that it sends sound waves through the water in an ultrasonic bath that ignites the cleaning process. A huge amount of minute bubbles, or often known as cavitations at times, are formed and then collapsed because of those sound waves. This creates many small jets moving through the cleaning liquid. These jets are used as a brush to wipe off the dirt from the object you are looking to clean. This results in ultrasonic cleaning of various objects within the cleaner. Ultrasonic is very helpful when it comes to cleaning objects that cannot be cleaned otherwise and you do not need to rub or polish these objects. 27

ISKRA PIO D.O.O.

Another field of application is ultrasonic gun and rifle cleaning. Quickly and effortlessly removes dirt, carbon and grease even the most soiled guns. Ultrasonic waves penetrate deep into those hard to reach places for thorough and effortless cleaning.

There are many considerations important to ultrasonic cleaning. Optimizing these variables will produce the best cleaning. The most important decisions to be made are choosing the proper cleaning solution, cleaning at the right temperature for the correct amount of time, and choosing the right size and type of ultrasonic cleaner. Iskra PIO have good technical and technological solutions with a background in maintenance and cleaning of military component parts. We are leaders in the field of ultrasonic cleaning and disinfection of respiratory equipment (breathing masks,....).That method removes body fluids , soot, toxic substances and debris from hard to reach areas, restoring parts to factory new cleanliness.

28

Microbiological safety cabinets The microbiological safety cabinets assure a high safety level for operators, surrounding the product. The cabinets are manufactured according to requirements of SIST EN 12469:2000 standard. Iskra PIO has more than 20 years of experience in safety cabinets design and manufacturing. We have the ability to offer reliable and user friendly cabinets adapted to the requirements of the user.

Microbiological safety cabinet executed in protective class III according to EN 12469:2000 assure safe conditions to operator, environment and product during handling hazardous materials. Safety is assured by • Hermetically sealed construction • physical barrier between operator and process – work is executed through gloves attached to chambers wall • Controlled negative pressure inside working chamber • H14 (EN 1822) HEPA filtration of inlet and double H14 HEPA filtration of exhaust air • Air flow according to standard EN 12469:2000

Validation We perform validations to confirm clean and safe working conditions. We have a qualified team and annually calibrated measuring devices for validations.

ISKRA PIO D.O.O.

Microbiological safety cabinet executed in protective class II according to EN 12469:2000 and DIN 12980:2005 assure ISO 5 (ISO 14644-1:1999), class A (GMP) clean conditions inside working area. Clean conditions are assured by H14 (EN 1822) HEPA filtration of recirculating and exhaust air. Laminar vertical air flow in working area and air curtain on the front aperture assure controlled clean conditions in the chamber and prevents material leakage from the chamber.

After the process we prepare validation report, which is acceptable for inspection services. Following tests can be included in the validation tests: • Airborne Particle Counts • Filter in Place Leak Test • Air Flow Volumes/Air Change Rates • Temperature/Humidity Test • Room Pressurisation Test • Smoke Patterns • Light Levels and Noise Levels • Leak test • Recovering time • KI-DISCUS test • OEL test • Sensors calibration • …

Additional safety is enabled by an automatic disinfection system integrated in cabinet’s construction and software. Design and construction of safety cabinets for military use is adjusted to assure maximal reliability in most demanding environments.

29

ISKRA ZAŠČITE D.O.O.

ISKRA ZAŠČITE d.o.o. Stegne 23 A SI-1000 Ljubljana

National Defence The importance of maintaining our National Defence and its personnel and equipment in a state of military readiness cannot be over-stated. To this end, the Slovenian Department of Defence spends millions of Euros each year on acquiring the latest in defence materiel and ensuring it is well maintained and operational. Iskra Zascite Ltd specialises in providing lightning, surge and grounding solutions to critical installations and systems. It manufacturers an extensive range of surge protection products for both power and data/ signal line protection at its 2000 m2 manufacturing facility located in the Stegne Industrial park. The facility is ISO 9001 certified and many of its employees are considered international experts in their field. It currently employs approximately 25 engineers on staff holding degrees at bachelor, masters or doctorate level.

T: +386 (0)1 5003 100 F: +386 (0)1 5003 236 [email protected] www.iskrazascite.si

how to conduct a complete risk assessment of the facility and the measures which need be taken to ensure this calculated risk falls below the tolerable risk. Part 4 of this standard explains how to mitigate the effects of lighting by creating safe “protection zones” within the structure and by applying specific measures such as: screening, structural lightning protection, grounding, equipotential bonding and surge protection. The companion IEC 61643 series of standards, provides information on the testing and selection of Surge Protective Devices (SPDs) used for the protection of sensitive electronic systems. Iskra Zascite has technical experts on both these committees, as well as other international bodies such as Cenelec in the EU, and IEEE and UL in the USA. Such active participation by our key technical personnel ensures they remain abreast of the latest know-how and that our products are able to comply with all relevant mandates and norms on safety and performance.

Military Systems – A coordinated approach to protection Military Systems - Environmental threats Modern military facilities comprise an array of sophisticated electronic systems which are vital to the nation’s security and the safety of its forces and operating personnel. Such systems, by their very nature, are also becoming increasingly susceptible to damage from transient over-voltages. These transients may eventuate from airborne events such as lightning, EMI or NEMP radiation, or from system level transients induced on the supply and data communications networks. The effects of the natural lightning event are described in the International Electrotechnical series of Lightning Protection Standards, IEC 62305. This four part series provides general information on the natural lightning phenomenon as well as guidance as to 30

Over the last 15 years the company has become recognised as a world leader in its field and a leading manufacturer of SPDs for the protection of electrical and electronic systems. The company is often contracted as a sub-consultant to large industrial projects where a coordinated approach to facility protection is required. The company is capable of providing comprehensive solutions to lightning and surge protection as well as grounding and bonding. These include carrying out risk management assessments, feasibility studies, technical consulting, engineering, commissioning, training and remote monitoring as required. To provide external structural lightning protection to facilities such as: command and control centres, munitions bunkers, radar, navaids and fuel storage depots, it

ISKRA ZAŠČITE D.O.O.

is licensed to market both conventional and early stream emission lightning terminals, insulated down-conductor systems and grounding solutions. It also produces a line of lightning event and surge event counters. A number of its products are designed for hazardous and explosive environments and are IECEx and ATEX certified for use in such environments. The company adopts a strategic approach to its manufacturing by ensuring the supply of critical components used in the manufacture of SPDs, remains within its control. For example, the company is physically located some few hundred meters from the fabrication of metal oxide varistors (MOV) and has recently commissioned its own state-of-the-art gas discharge tube (GDT) fabrication facility. Both MOVs and GDTs are key components to SPDs. This high degree of vertical integration has allowed our manufacturing to remain world competitive despite the pressures from Asian competitors. To our important customers, this translates to meaning supply security, knowing that the designs and solutions we engineer today, will remain available and supported in the years ahead. The company also prides itself in design excellence and in solving practical challenges. An example of this is our SAFETEC series of SPDs, which employs patented technology to allow the SPD to handle temporary over-voltages of the power network without burning or permanent disconnection. To the customer this means added safety and reliability as well as increased operating service life.

Military Systems – Remote monitoring As with many electronics devices connected to the power grid, there is a growing need to provide capabilities for remote monitoring. The utility industry is beginning to talk of a “smart grid” of tomorrow. While this term may means different things to different people, it clearly does imply that equipment connected to the power network will require to be remotely monitored and/or controlled. Iskra Zascite are already working on the new generation of “intelligent SPDs” - SDPs which can be remotely monitored and signal their life-status to a centralized facility management system - for example by flagging that maintenance is required, or that a surge has been diverted to protect the equipment. The new ProGrid series of surge and lightning counters is one such example where a remote communication link via Ethernet or GSM is provided. To better accommodate our future plans to provide a comprehensive and coordinated approach to remote data monitoring, the Iskra Zaščite Group acquired the Slovenian company Solvera Lynx. This addition brings to our business the capability to integrate many aspects of a strategic facility including its: surge and lighting protection systems, tactical communications, air space control, artillery command and its control and communications systems.

Military Systems – A strategic partner Iskra Zascite is proud to be of service to the Slovene Ministry of Defense and Slovene Armed Forces. A number of our engineers have experience working on high level defence projects both nationally and internationally. As a company we are committed to excellence in design, manufacture and partnering with our clients through best practice. We pride ourselves in technical excellence, a skilled work force, internationally respect experts and a progressive management style.

31

ISKRATEL D.O.O.

Iskratel d.o.o. Ljubljanska c. 24a SI-4000 Kranj

Iskratel is leading European InfoCommunications vendor and solution provider with 65 years of experience, own R&D and manufacturing, more than 800 employees and local presence in over 30 countries. Highly integrated end-to-end solutions are based on our extensive experience in fixed and mobile telecommunications, and are designed to be future proof, which is guaranteed by Iskratel’s active involvement in various technology standardization and regulation bodies. Iskratel InfoCommunication solutions blend into any environment and are tailor made for various segments and industries including military, public safety, railways, energy sector and large corporations.

Modular Multiservice Architecture for Realtime Services Iskratel SI3000 MMARS is designed for various military deployments, public safety, humanitarian aid relief and first responders. It is a next-generation, packetbased, tactical network component that can be used as the basis for many new solutions, implementing the TACOMS STANAG, which is defined for NATO countries to enable interconnectivity. It is a perfect solution that enables rapid response in case of crisis or natural disasters, while maintaining connectivity and services. It supports legacy equipment and interconnections with the public telephone network. Its compact design, which is instantly deployable, provides a rich set of services, including voice, video data and user mobility.

T: +386 4 20 7000 [email protected] www.iskratel.si

The MMARS node is developed according to the latest ETSI (IMS, MLPP, H.323), IETF (SIP, SIP-T) and NATO (TACOMS and NNEC) standards, thus providing a rich set of quad-play services with superior service quality and standardized external interfaces, with backward compatibility to legacy (tactical, PSTN) systems. The services, like priority services, announcements, message play and record, advanced multimedia conferences, security features, are provided as an integral part of the MMARS node. Nevertheless, the MMARS node provides, together with Battlefield Directory or Home Subscriber Server, user/terminal and service mobility that allows users to access services, not only on one node, but they are able to “roam” seamlessly between nodes.

Mission-critical Voice Over LTE Iskratel SI3000 IMS VoLTE solution provides reliable and secure voice communication. Typically dedicated networks provide only voice services. Next generation mission critical solution leverage standard IP technologies and provide a broadband platform for multimedia services including data, voice and video communication. These services bring many new possibilities for usage in various military deployments and public safety networks. IMS (IP Multimedia Subsystem) presents the core of next generation’s mission critical networks, by providing globally standardized 3GPP architecture which ensures seamless integration with LTE radio network. Iskratel’s VoLTE solution is based on the SI3000 IMS, which brings IMS functionality and interfaces in a compact package for fast integration and deployment. It can scale from few hundreds up to a few hundred thousand users for tactical level military applications or nation-wide public safety networks, where integration with existing networks is essential. Iskratel’s solution provides a rich set of interfaces for interconnectivity with NGN and with legacy networks using TDM, analogue or IP interfaces. Iskratel’s MMARS solution is configurable to IMS to ensure VoLTE services for mobile users.

32

Public Address & General Alarm System Public alerting and warning systems are needed to protect the lives of people in case of major emergency by warning the public of impending natural disasters, war situations and other dangers. There is no single way to reach all citizens in the cases of danger. Besides traditional technologies like sirens, fixed phones, TV and radio broadcast today we also consider mobile phones and internet. Iskratel’s comprehensive Public Information and Notification System (PINS) assures timely and reliable information to everyone involved in emergency situations. It integrates new and legacy public warning systems, providing a broad range of message options and communications pathways for the delivery of alert and warning information to citizens before, during, and after a disaster. The heart of the system is Iskratel’s PINS server, which controls a variety of public alerting and warning systems like sirens, TV and video broadcasting, audio and video equipment and others. Any type of system that can be used for alerting and warning purpose can be integrated and controlled by PINS server.

Many advanced features and applications like situation awareness provided with visualisation on integrated geographic information system (GIS), work-flow application for emergency events handling and maintaining records of all operations, statistics and analytic tools, pre-planned mitigation and response scenario management significantly enhance operators’ efficiency.

ISKRATEL D.O.O.

Our goal was to simplify complex network architecture with “all in one” compact concept: • End-to-End (E2E) pre-integrated open IMS solution with open APIs • centralized management of complete E2E solution • proven and certified E2E solution, verified by institutes, certification bodies and technology partners • integrated Telephony Application Service (iTAS) • VoLTE with enhanced Single Radio Voice Call Continuity (eSR-VCC) • Rich Communication Suite.

Over the years company gained a leading technological position while so-crafting telecommunication trends and protocols. Iskratel’s call servers that include IMS/ AGCF have over 500 deployments worldwide, in various industries, military and other governmental facilities. Iskratel delivers mission critical communication networks for governmental and public safety organizations with its own 112 emergency solution for receiving and processing emergency calls and interagency coordination. Also Iskratel LI/SORM solution perfectly fits into regulatory requirements for voice and data interception for security and public safety importance. The Iskratel SI3000 product family is a unified platform that combines all the IP-technology-based products and solutions, but concurrently supports smooth transition from legacy technologies. Key advantages are robustness and reliability, modular design and scalable architecture that facilitate solutions of all sizes. The SI3000 stands for wide interoperability and readiness for the delivery of any type of mission critical service.

33

IZOP-K D.O.O.

IZOP-K D.O.O. Hrašče 23 SI-5272 Podnanos

The company is known over the world as a byword for responsibility, performance and commitment. The distinctive feature of IZOP-K is inside its own facilities which constitutes services of: • storage and manipulation explosives, ammunition, arms. • special production of military components and defence industry • demilitarisation and recycling of conventional munitions Our experience covers everything from small arms ammunition up to large and more complex items such as those containing White Phosphorous, CBU’s, Sea Mines, Anti Personnel Mines, Anti Tank Mines and rockets. The IZOP-K team consists of engineers and laboratory technicians from the following fields: • arms production/destruction engineering • hazardous materials’s processing engineering • logistics engineering Issuing land and overseas logistic services, supported with facilities in option to store 750T NEM of goods (ADR 1.1 - 1.6) both palletized and containerized. Trading with explosives, ammunition, vehicles, arms. Helmets for military purpose are designed, produced and tested in accordance with the standards. Severe inspections concerning both raw materials as well as production process guarantee, for each helmet, the fulfillment of the technical specification of quality, reliability and safety.

34

T: +386 31 278 300 M: +386 41 794 895 E: [email protected] W: www.izop-k.com

Production unit conforming to GMP and ISO standards, safe rooms, a well-equipped laboratory, remote controlled detectors, test facility with a high safety level and storage facilities secured according to military standards. IZOP-K is representing partners for lightweight armor soldier architecture, EOD suits, explosives, tanks, aerospace, vehicles, ammunition and pyrotechnics.

Cryogenics is one of Le-tehnika’s programs of high technology equipment With almost 30 years of experience we have become experts in cryocoolers and have specialized in the development for technology of miniature cryogenic coolers, their production, assembly of components and their integration into the higher level systems. According to the business strategy of the company, we are operating with more than 15 countries worldwide.

T.: +386 (0) 420 20 280 F.: +386 (0) 4 204 21 22 E: [email protected] W: www.cryocoolers.eu

LE-TEHNIKA D.O.O., KRANJ

Le-tehnika d.o.o., Kranj Šuceva ulica 27 SI-4000 Kranj

The main products of our program include specialized miniature coolers based on the Joule -Thomson effect (self-controlled, fixed orifice, actively controlled, fast cool down, nonstandard) and coolers based on Stirling effect (linear and rotary drive). Products are designed for cooling infrared detectors used in various fields of industry and other purposes, like surveillance, reconnaissance and in missiles. Products are made by request of specific needs of the client. We present our cooling system at conferences or at trade fairs such as SPIE, EUROSATORY, DSEI and others. Le-tehnika has received prestigious national and international enterprise awards earned for specific achievements and have international certification marks such as ISO 9001 and ISO 14001 standards, which provide high quality management.

35

MIL SISTEMIKA D.O.O.

MIL SISTEMIKA d.o.o. Zemljemerska ulica 10 SI-1000 Ljubljana

E: [email protected]

SISTEMIKA d.o.o.

About MIL Sistemika MIL Sistemika is a software development and consulting company, with a mission to sell commercial off the shelf products in the area of military command & control, communications and training & simulation products. MIL Sistemika focus on Command & Control software, covering all levels from the individual soldier to the top (planning) levels of military command structure. It covers Sensor & Weapons integration, GIS navigation and mapping system, Communications suits, and integrated training tools. MIL software is designed on true mission requirements, and feedback from the soldiers. MIL software can act as a true force multiplier when used in correct manner. Command and control refers to the ability of military commanders to direct forces. The addition of communications to the grouping reflects the fact that communications is required to enable this coordination. In modern warfare, computers are also a key component.

Dismounted soldier (future soldier) Personal Eye System is a personal tracking, navigation and data sharing application aimed at soldiers, police, security forces, emergency services and others that need topographic navigation, tracking, blue force tracking, and common operational picture sharing. Designed to run on a popular Android platform, can be used as a PDA (Personal Data Assistant) or fully integrated in a future soldier’s kit.

36

MIL SISTEMIKA D.O.O.

Battlefield Management System (BMS)

C4I Connectivity

With its robust and modular architecture built around a high performance GIS Engine, the “Battle Eye System” delivers all tactical data to the screen of the soldier. It offers a wide range of connectivity to various data networks, improves the command and control process and enhances situational awareness. It helps gather and share information and integrates several navigation, weapon and sensor systems. BES features a battle-proven intuitive touchscreen user interface designed to be used in vehicles moving over rough terrain.

C4I Bridge is a connectivity gateway, interconnecting different C4I systems into one seamless coalition command and control system. Modular architecture of BRIDGE shares the same design principles with other MIL products thus ensuring maximum expandability and connectivity. All filtering and data transformation is configuration based minimizing the need for frequent software upgrades.

37

PREDILNICA LITIJA D.O.O.

Predilnica Litija d.o.o. Kidričeva ul. 1 SI-1270 Litija

Predilnica Litija is producer of special yarns made of natural and synthetic fibers and their blends established in year 1886. We pay special attention also to high performance fibres for protective clothing with different functionalities. A part of our production programme/ range is for years focused on producing special yarn blends for uniforms. With careful selection of the best raw materials in combination with the best spinning processes and practices we help our customers to create products with the desired functional properties for uniforms, professional and active wear.

Personal Protection Equipment (PPE) Abrasion Resistancy:

• durability • comfort • lightweight strength in CORDURA® brand qualifying yarn blends such as: • cotton / INVISTA T420 polyamide 6.6 • INVISTA T420 polyamide 6.6 / cotton / lyocell TENCEL • cotton / INVISTA T420 polyamide 6.6 / elastane XLA CORDURA® is a trademark of INVISTA for durable fabrics. • other blends like: • cotton/polyester with regulated IR remission

38

T: +386 1 89 90 200 F: +386 1 89 90 248 E: [email protected] W: www.litija.com

High Performance Products offering Flame Retardancy: with Modacrylics FR in 100% and in blends with cotton, Lenzing FR, viscose, modal etc. • soft, warm and resilient • easily dyed, outstanding resistance to chemical agents, metal splash resistant, arc-flash protective, not toxic & non-allergenic, no moth or mildew threat with Meta-Aramids in 100% and in blends with cotton, Lenzing FR, viscose, modal etc. • good resistance to abrasion, low flammability, nonmelt, wearability and folding endurance with Para-Aramids: • improved strength-to-weight properties

Additional Antistatic Property • achieved by adding 2-3% of antistatic fibre in the final yarn From above quoted fibres and their properties we are capable to produce high performance protective clothing which protects people (soldiers, firefighters, policemen) from fire, cuts, bad weather conditions or even electromagnetic waves. Together with our partners we can offer you also a final product.

MORH

SeanTech, process engineering, L.t.d. is a privately owned Slovenian engineering company present on the domestic and global markets with tailor made solutions of process equipment. SeanTech L.t.d. is the legal successor of the company Gostol-Gopan d.o.o. for the product range of process equipment with “Gostol” brand name and Gostol know-how.  In fact SeanTech L.t.d. is Gostol-Gopan’s former Division of Process equipment with over 60 years tradition and references since 1947. One of SeanTech’s product ranges is a highly developed dual-use equipment for production of energetic material for civil and defence industry purposes: Kneading Machines, Cutting Machines, Rolling Mills, Mixers, Presses etc. all in accordance with Directive 94/9/EC (ATEX).

SEANTECH L.T.D.

SeanTech L.t.d. Mekinčeva ulica 15, SI-1000 Ljubljana T: +386 5 33 11 700, F: +386 5 33 11 709 E: [email protected], W: www.seantech.eu

CUTTING MACHINES are designed for cutting extruded energetic material of different shapes into smaller stripes, squares, cylinders and offer the following key benefits: • adjustable cutting length, very high accuracy; • PC/PLC control and monitoring of the process; • custom design; long term performance; Cutting machines types: • The Cutting Machine type »Guillotine« is designed for cutting bundles or strips of extruded energetic material.

SeanTech L.t.d. presents: KNEADING MACHINES are designed for kneading, mixing and homogenizing of pasty media.

• The Rotary Cutting Machine is designed for cutting extruded energetic material with round shaped cross-section.

• The Cutting Machine type P-4 is a table cutting machine with one channel designed for cutting energetic material stripes and blocks. Key benefits: • optimal performance by using two parallel, horizontal mixing arms; • mixing arms rotating at different rotating speed one against the other; • motor or hydraulic drive; • double bottomed mixing bowl for flow heating, cooling or constant temperature maintaining; • heating media: steam, thermo oil or water; • emptying of the bowl by its overturning; • PC/PLC control and monitoring of the technological process in the Kneading Machine; • custom design; long term performance.

• The Cutting Machine type CM is designed for cutting partially dried energetic material tubes and sticks.

39

SEANTECH L.T.D.

MIXERS are designed for mixing and homogenizing of pasty, liquid or powder media with the following key benefits: • adjustable parameters, very high efficiency; • PC/PLC control and monitoring of the process; • video control and monitoring of the process; • custom design; long term performance;

Types of Mixers: • The Mixing drum MP-1000 is designed for mixing or polishing the energetic material’s surface with graphite or other agents.

PRESSES are designed for pressing and extruding of energetic materials. The key benefits are: • adjustable parameters, very high efficiency & accuracy; • PC/PLC control and monitoring of the process; • video control and monitoring of the process; • custom design; long term performance; Types of Hydraulic vertical press HVP450: • HVP-450/2 - with two hydraulic cylinders • HVP-450/1 - with one hydraulic cylinder

ROLLING MILLS are designed for dewatering, gelatinization and final shaping (thickness) of energetic material with the following key benefits: • adjustable parameters, very high accuracy; • PC/PLC control and monitoring of the process; • custom design; long term performance; Types of Roll Mills:

• The Homogenizer MH-5000 is designed for mixing or homogenizing of energetic material granules and other agents.

• The Differential Rolling Mill:

• The Final Gelatinization Rolling Mill: • The Vertical Planetary Mixer VPM-600 is designed for mixing nitrocellulose and alcohol with nitroglycerine and chemical additives.

• The Fine Rolling Mill is designed for final shaping of thickness of energetic material sheets.

For more technical information please request a leaflet on SeanTech’s e-mail: [email protected].

40

T: +386 1 4202490 F: +386 1 4202495 E: [email protected] W: www.s-tmm.si

S-TMM SISTEMI D.O.O.

S-TMM Sistemi d.o.o. Zabrv 120 SI-1292 Ig

Supporting limits

UNIQUE SOLUTION RK3 - ANTENNA SYSTEM CONTROLLER Rk3 is new system device developed with care to fulfill demanding requirements of antenna systems. RK3 offers integrate devices integrated into a single unit offering 3 independent channels for controlling antenna rotators and motorized masts (more motor channels on special request). Five additional module compartments for various RF signal distribution modules. Custom designed functional modules can also be integrated on request. Compact design saves valuable rack space, especially in mobile applications and simplifies system design and integration. RK3 provides power for DC and AC motors at 12 or 24V and max. 8A per channel. Device can be controlled with keyboard on device itself, remotely with remote panel, with PC via serial RS232 connection or through Ethernet and tablet.

PERFECT SOLUTION ANS-P-1000WPORTABLE POWER SUPPLY SYSTEM ANS-P-1000W is an autonomous power system integrated in a robust carrying case. System ANS-P-1000W is designed to provide a DC voltage 12V and 230V AC power variety of customers where we do not have the possibility of using the mains. The main elements of the system are Li-Ion battery 12/100Ah, BMS battery management system and 1000W power inverter 12VDC/230VAC control and display management system.

Li-ion

S-TMM Sistemi d.o.o. Zabrv120, SI-1292 Ig Tel:+386 1 4202490 Fax:+386 1 4202495 [email protected] www.s-tmm.si

41

S-TMM SISTEMI D.O.O.

S-TMM Sistemi d.o.o. Zabrv 120 SI-1292 Ig

T: +386 1 4202490 F: +386 1 4202495 E: [email protected] W: www.s-tmm.si

Supporting limits The company is primarily engaged in the design and construction of RF systems, integration, maintenance and education of end users. This enable our clients to achieve the best results. For needs of our customers, we are planning antenna systems, perform installations and measurements on the RF field. Our references; Ministry's of Defense, Airports, Police, Agency's for Radio frequency spectrum supervision and the mobile operators.

Comprehensive solutions that create added value To serve our customers on higher level we developed our own products and designed outstanding solutions.

RK3 - ANTENNA SYSTEM CONTROLLER ANS-P-1000W PORTABLE POWER SUPPLY SYSTEM TRANSPORTABLE - Standalone measuring unit

REMOTE - Standalone - Solar and Wind powered measuring Unit with Weather station.Where no other electricity supply is available.

Measuring vehicle – inside mast

Measuring vehicle – outside mast

S-TMM Sistemi d.o.o. Zabrv120, SI-1292 Ig Tel:+386 1 4202490 Fax:+386 1 4202495 [email protected] www.s-tmm.si

42

TRIVAL ANTENE d.o.o. main activities are: • development and production of antennas, masts and accessories for wireless telecommunications; • development, engineering, project-making and consulting in the field of wireless telecommunications TRIVAL antennas made of composite materials (polyester and epoxy resins reinforced with fibreglass) were first produced back in 1965, on the premises of the SVIT Kamnik company. Today Trival Antene d.o.o. has on its list more than 200 different types of antennas, antenna masts and accessories. Apart from military items, the company supplies products for civil professional use (marine applications, industry and organisations, ministries, radioamateurs, mobile comm’s, etc.)

TRIVAL Co. products are subdivided as follows: • military antennas (HF, VHF and UHF antennas, stationary, tactical and mobile antennas), • antennas for marine applications (MF, HF and UHF antennas for vessels and yachts), • antennas for civil-professional communications (HF, VHF and UHF antennas, stationary, mobile antennas and antennas for hand-held radios, omnidirectional di pole and co-linear antennas, directional yagi and log-period ic antennas), • antenna masts (tubular sectionalised and winch driven telescopic glass-fibre masts from 5 to 18 m) • antenna accessories (cables, connectors, etc.), • custom designed antennas (antennas for EMCmeasurements, etc.)

T: +386 1 831 43 96 F: +386 1 831 33 77 E: [email protected] W:www.trival-antennas-masts.com

Antennas

TIVAL ANTENE D.O.O.

Tival antene d.o.o. Gorenjska cesta 25 SI-1234 Menges

The TRIVAL ANTENE company develops and produces military antennas in HF, VHF and UHF frequency range for tactical transportable, mobile or stationary use. The antennas are whip-type monopoles, omni-directional or directional antennas (yagi or log-periodic type). They are usually made of composites (epoxy or polyester, glass-fibre reinforcement), with stainless steel metal joints. All antennas for military use comply with MIL-STD-810F.

Antenna masts TRIVAL antenna masts may be divided into two types: tubular sectionalised and telescopic winch driven masts. All masts are made of composite materials, up to 18 metres high. All mast types are intended for tactical use with included - guying accessories kit. Telescopic masts are also suitable for mobile use (including mounting kit accessories).

43

VR-ELEKTRONIKA,D.O.O.

VR-elektronika, d.o.o. Pod Hruševco 48 F SI-1360 Vrhnika

MEASUREMENT INTERFACE PR-12

GUN STABILIZATION AMPLIFIER AMT-STP2 (T55)

The PR12/T-55 measurement interface is intended for quick checking of the voltages and currents on the connector of the AMT_STP2 (AB-T54B) amplifier in the gun stabilizer of the T5* serier main battle tanks. It fits mechanically directly on the amplifier connector. It can measure the input and output voltages of the amplifier, and the supply voltages, currents and frequency.

The AMT-STP2 amplifier is a direct replacement for the original tube based servo amplifier used in the stabilizer systems of the T5* series main battle tanks.

It is powered by a built-in rechargeable 9V 120mAh NiCd battery. PR-12 is shipped with a suitable battery charger, with a 230VAC power plug. The 14V/AC output includes a connecting cable with the required DC connector that fits PR-12. The PR-12 can measure 15 different electrical quantities in the STP-2 stabilizer, which are accessible on the amplifier connector. In most measurements, the readout is calibrated in % of the nominal value, so that “100.0” on the display corresponds to the nominal value of the measured quantity.

44

E: [email protected] T: +386 1 750 24 35 F: +386 1 750 24 36

The AMT-STP2 amplifier is 100% mechanically and electrically compatible with the original amplifier, and can be used as a drop-in replacement. The AMT-STP2 amplifier has the following advantages over the original amplifier: • Better lifetime stability -no re-adjustment because of aging tubes • Less maintenance required • Better thermal stability (less change of parameters during warm-up) • Better stability of the amplification • Better calibration sensitivity of the azimuth and elevation potentiometers • better mechanical stability • Lower power consumption (no tube heaters) means cooler operation

• With over 150 years of tradition, voluntary membership, and by far the largest number of members, the CCIS is the most influential business association in Slovenia • Offering the collective wisdom and rich experience of more than 100 experts and specialists • Uniting commerce, industry, tourism and service sectors in Slovenia • As a member of Eurochambres and the ICC, as well as other international associations and organisations, the CCIS is part of an extensive international network with innumerable contacts • References and experience in the realisation of EuropeAid programmes such as Asia Invest, AL Invest, Gateway to Japan, Executive Training Programme for Japan and Korea…

At Your Service Chamber of Commerce and Industry of Slovenia – CCIS Dimičeva 13, SI-1504 Ljubljana, Slovenia T: +386 1 5898 000, F: +386 1 5898 100 E: [email protected] W: www.gzs.si/eng Our staff are at your service and will provide you with all the information you need!

SLOVENIAN DEFENCE INDUSTRY CLUSTER Grozd obrambne industrije Slovenije (GOIS) The Slovenian Defence Industry Cluster (Grozd obrambne industrije Slovenije – GOIS) is a business association based on the economic interest of our members. It was established in 2008 and brings together Slovenian suppliers of defence, security and protection products and services. The Cluster assists its members with the creation of optimal conditions for the research, development, production, testing, maintenance, trade and marketing of their products and services in the areas of defence, security and protection. We offer services such as the following: • Promoting Slovenian defence & security industries in Slovenia and abroad. • Promoting and creating opportunities for the international cooperation of Slovenian companies.

SLOVENIAN DEFENCE INDUSTRY CLUSTER / CHAMBER OF COMMERCE AND INDUSTRY OF SLOVENIA

The Chamber of Commerce and Industry of Slovenia - CCIS

• Assisting via cooperation with international defence & security industries and their associations. • Assisting foreign companies when seeking to establish contacts with Slovenian companies. • Assistance and consulting services for offset obligors.

GOIS Slovenian Defence Industry Cluster Dimičeva 13, SI-1504 Ljubljana, Slovenia T: +386 1 5898 423 F: +386 1 5898 100 E: [email protected] W: giz-gois.si 45

MOUNTAIN WARFARE IN FUTURE NATO OPERATIONS Military mountaineering in Slovenia has a rich history, which culminated in the establishment of the Slovenian Military Mountain School in 1996, as a provider of professional training. In addition to regular training of Slovenian Armed Forces’ units, the school conducted courses for NATO Nations and Partners as part of bilateral military cooperation, as well as in the preparation for the deployment of contingents to crisis response operations. On March 25th 2015 Memorandum of Understanding to establish NATO MW COE has been signed among ACT, Croatia, Germany, Italy and Slovenia in Washington. Austria will participate as a partner nation. The NATO MW COE represents the core with the required professional skills to develop standardized training. Demanding terrain and climate has always been a great challenge to perform all forms of military operations. With the support of the Nations, the proposed NATO MW COE is the tool to achieve this level of standardization and interoperability in mountainous environment, with the intent to support the NATO smart defense approach. Director NATO MW COE Colonel Boštjan Blaznik Contact: Nato MW COE, Poljče 27, SI-4275 Begunje na Gorenjskem, E: [email protected], F: +386 4 533 3807

46

Slovenian Armed Forces www.slovenskavojska.si

Photo: Bruno Toič

Slovenian Defence Products 1

68

MINISTRY OF DEFENCE www.mo.gov.si

Photo: Bruno Toič

2

FOREWORD LONG INDUSTRIAL TRADITION, QUALITY AND INNOVATION

The Slovenian defence industry is based on a long Slovenian industrial tradition, engineering knowledge and mastery of craft. Strong export orientation, investments in knowledge, new technologies and the implementation of international standards have all shaped Slovenian defence industry in the last decades. The share of exports represents almost 80% of the total revenues.

Trading in defence equipment in Slovenia is regulated by the Law on Defence and other legal acts requiring the producers of military weapons and equipment to register with the Ministry of Defence of the Republic of Slovenia. There are several ways potential customers can contact the Slovenian producers of defence equipment, including by contacting the national defence industry association Slovenian Defence Industry Cluster.

The production of military weapons and equipment is part of a tradition lasting several hundred years in the territory of Slovenia. The well-renowned Slovenian precision and craftsmanship are reflected in Slovenian defence products that are distinguished by the inclusion of their own know-how, highest quality, innovation and optimal performance-to-cost ratio. Digitalization is rapidly becoming an integrated part of all of them.

This publication was prepared by the Slovenian Defence Industry Cluster (GOIS) in cooperation with the Chamber of Commerce and Industry of Slovenia and the Ministry of Defence of Slovenia. It represents Slovenian companies which provide high quality products and services in the areas of defence, security and protection. You can obtain more information about the Slovenian defence industry from:

Since joining NATO in 2004, interoperability and compliance with NATO standards have become the guiding principle of the development of new defence production programs in Slovenia. The cooperation among Slovenian enterprises, universities and research institutes records a constant growth.

GOIS Slovenian Defence Industry Cluster Dimičeva 13 SI-1504 Ljubljana, Slovenia T: +386 1 5898 423

The close collaboration of the companies with the Standardisation, codification and quality assurance department of the Ministry of defence of Slovenia keeps the production of armaments and military equipment in accordance with up to date NATO AQAP series standards and manages product quality assurance during their life cycle.

F: +386 1 5898 100 E: [email protected] W: http://giz-gois.si

The catalogue presents diverse products and services. From solder equipment, arms, arms parts, ammunition, advanced battlefield management, simulation and training systems, advanced soldier uniforms, light aircrafts and unmanned aircraft systems (UAS), border control systems, CBRN reconnaissance systems, telecommunication systems, logistic support lifting systems, explosives storage and manipulation, aerospace technologies, software, engineering, modelling and design for military purposes, to special production technologies.

3

CONTENTS PRODUCT, SERVICES Products and services

Company

1. Soldier Equipment

Page

ALPINA d.o.o AREX d.o.o. ARCTUR d.o.o. IZOP-K d.o.o. MIL SISTEMIKA d.o.o PREVENT&DELOZA d.o.o. UF PRO®, UNI&FORMA d.o.o.

5 8 6 38 46 52 60

AREX d.o.o. IZOP-K d.o.o. SEANTECH d.o.o.

8 38 54

3. Armaments, armament parts, guns, ballistic protection steels

AREX d.o.o. ARMAS d.o.o. VALHALLA TURRETS d.o.o.

8 10 61

4. Light aircrafts , Unmanned Aircraft Systems (UAS)

C-ASTRAL d.o.o. PIPISTREL d.o.o. Ajdovščina

15 50

5. Border monitoring systems and mobile surveillance systems

DAT-CON d.o.o.

22

6. Battlefield Management, Command Systems

MIL SISTEMIKA d.o.o

46

7. Training simulators

GUARDIARIS d.o.o. MIL SISTEMIKA d.o.o

26 46

8. Chemical Biological Radological Nuclear (CBRN) reconaissance, detection, protection

ARCTUR d.o.o. EM. TRONIC d.o.o. ISKRA PIO d.o.o.

6 19 35

9. Telecommunication systems

ISKRA d.d. TRIVAL ANTENE d.o.o. ISKRATEL d.o.o. MVM TEL d.o.o. SKYLABS d.o.o.

33 58 34 44 56

10. Lifting systems for military and civil logistic

BIJOL d.o.o.

12

11. Softvare for Alliance Ground Surveillance (AGS)

COMTRADE d.o.o.

18

12. Textile products, yarns, uniforms, evaporative cooling

PREDILNICA LITIJA d.o.o. PREVENT&DELOZA d.o.o. UF PRO®, UNI&FORMA d.o.o.

41 52 60

13. Engineering Modelling and Design

UNIVERSITY OF LJUBLJANA, FACULTY OF MECHANICAL ENGINEERING UNIVERSITY OF MARIBOR, FACULTY OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCE

30

14. Cryogenic coolers for IR systems, Stirlig motors

LE-TEHNIKA d.o.o.

42

15. Aerospace Technologies, System design for harsh environment

SKYLABS d.o.o. UNIVERSITY OF MARIBOR, FACULTY OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCE

56 28

16. Explosives management, storage, testing and disposal

IZOP-K d.o.o.

38

17. Mobile water purification systems

ARTOS GROUP d.o.o.

14

18. Special production technologies for propellants

SEANTECH d.o.o.

54

19. Defence events and exhibitions

POMURSKI SEJEM d.d.

59

2. Ammunition and Explosives

4

26

CONTENTS LIST OF COMPANIES FROM A to Z ALPINA d.o.o.

5

ARCTUR d.o.o.

6

AREX d.o.o.

8

ARMAS d.o.o.

10

ARTOS GROUP d.o.o.

14

BIJOL d.o.o.

12

C-ASTRAL d.o.o.

15

COMTRADE d.o.o.

18

DAT-CON d.o.o.

22

EM.TRONIC d.o.o.

19

GUARDIARIS d.o.o.

26

ISKRA d.d.

33

ISKRA PIO d.o.o.

35

ISKRATEL d.o.o.

34

IZOP-K d.o.o.

38

LE TEHNIKA d.o.o.

42

PREDILNICA LITIJA d.o.o.

41

MVM TEL d.o.o.

44

MIL SISTEMIKA d.o.o.

46

PIPISTREL d.o.o. Ajdovščina

50

PREVENT&DELOZA d.o.o.

52

POMURSKI SEJEM d.d.

59

SEANTECH d.o.o.

54

SKYLABS d.o.o.

56

TRIVAL ANTENE d.o.o.

58

UF PRO®, UNI&FORMA d.o.o.

60

VALHALLA TURRETS d.o.o.

61

UNIVERSITY OF MARIBOR, FACULTY OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCE

28

UNIVERSITY OF LJUBLJANA, FACULTY OF MECHANICAL ENGINEERING

30

5

Ministry of Defence Vojkova cesta 55 SI-1000 Ljubljana T: +386 1 4712 211 E: [email protected]

MINISTRY OF DEFENCE

www.mo.gov.si

MINISTRY OF DEFENCE OF THE REPUBLIC OF SLOVENIA carries out activities to support Slovenian defence industry and research and development institutions. It relates them to allied activities in the fields of manufacturing, research and development, the use of European and NATO standards, quality assurance and codification of products.

and the protection and rescue system in areas that are important for the Republic of Slovenia in the broader social context.

Activities of the Ministry of Defence in the field of standardization, codification and quality assurance: • It manages the standardization process in the defence system; issues Slovenian military standards; keeps record of Slovenian military standards and NATO standards; ensures their distribution to the internal professional public, government bodies and the industry.

MINISTRY OF DEFENCE OF THE REPUBLIC OF SLOVENIA carries out activities to support Slovenian defence industry and research and development institutions. It relates them to allied activities in the fields of manufacturing, research and development, the use of European and NATO standards, quality assurance and codification of products.

• It represents the national authority of the government of quality assurance in the life cycle of armaments and military equipment in accordance with NATO standards series AQAP (Allied Quality Assurance Publications). It acts as a proxy for the implementation of acquisitions for the needs of other NATO member states and conducts audits of quality systems according to NATO standards of the series AQAP (Allied Quality Assurance Publications).

Activities of the Ministry of Defence in the field of ​​research and development:

• It provides long-term support for capability goals of the Slovenian Armed Forces and development of new findings to contribute to a more efficient system of protection and rescue. It encourages scientific excellence in Slovenian scientific institutions. The results are usually not intended only for military use, but are also useful in the wider society. Dual use means that the results are useful for both military and civilian purposes. • In invests international efforts within the EU and NATO in priority scientific areas identified by the NATO Organization for Science and Technology and the European Defence Agency. The Ministry of Defence, therefore, encourages the development of scientific excellence, which in the long term contributes to increasing the capacity of the Slovenian Armed Forces

6

Alpina d.o.o. Strojarska ulica 2 SI-4226 Žiri T: +386 4 5158 000 F: +386 4 5158 370 E: [email protected]

www.alpina.si www.alpinasports.com

Military footwear

Technology on a mission

Alpina is a Slovene company with more than 70 years of tradition in development, manufacture and marketing of footwear. The brand Alpina is a guarantee for high quality manufacture, innovative solutions and user friendly design.

Work in army offers challenges along with harsh conditions and even accidents - untamed nature and hazardous areas are all hostile environments for a gentle, unprotected human foot. Under such conditions each day poses countless conflicts between the vulnerable nature of a foot and the demanding forces surrounding it. ALPINA develops shoes that intervene in these conflicts as an ever-present, flexible, and caring force with one mission to accomplish: to help complete the mission while keeping feet safe and satisfied.

The wealth of experience in footwear production and development has been applied also to the manufacturing of military boots. Alpina has been supplying the Slovene armed forces with military boots from very beginning and has been keeping up with the requirements and trends of a modern military. Systematic testing and high-tech development have enabled Alpina to develop high quality military footwear that meets the strict requirements and trials that a modern military force is subjected to.

Carefully selected materials, anatomically designed footbed, firm rubber sole and protective toe cap insure extreme rigidity and comfort at the same time.

7

Arctur d.o.o. Industrijska cesta 1A SI-5000 Nova Gorica T: +386 5 3029 070 E: [email protected]

www.arctur.si/aisense/

FIRST MILITARY HANDHELD GAMMA-RAY LOCATOR IN THE WORLD developed in collaboration between Arctur and AISense. Indispensable tool for battlefield area examination, checkpoints and terrorist threat prevention. Rugged and lightweight for handheld use or mounted on military vehicles (e.g. drones). AISENSE GAMMA IV - FINDING UNKNOWN GAMMA-RAY AISENSE GAMMA IV – THE INSTRUMENT SOURCES IN THE SHORTEST TIME AISense Gamma IV is the world’s first true real-time gamma-ray locator. The device is distinct from all other available in the marketplace in that it is the first handheld instrument that provides the direction vector towards a gamma-ray source in real time, within the entire solid angle of possible directions.

The tool of choice depends on the required functionality: Threat

The Appropriate Tool

General radiation level

 Dose rate meter

Static radiation distribution

 Gamma Camera

Unknown & hidden radiation sources

 AISense Gamma IV

This fundamentally changes the way gamma-ray sources are searched for and results in a dramatic shortening of search operations. Consequently, a significantly lower radiation dose is received by the personnel. Additionally, the device is able to acquire gamma- ray energy spectral information and use it for subsequent radionuclide identification. The device detects the presence of neutrons as well. Shockproof, it can withstand a fall of 1 meter.

The device literally guides the operator to the gamma-ray emitting source. The main difference between the new instrument and other gamma-ray detecting devices is the time to locate the source - this can be a crucial parameter.

8

CASE STUDY - CHECKPOINT When the unit is mounted on a permanent stand at road side (e.g. at a military checkpoint), it is configured in the remote mode and keeps streaming data to an operator in the vicinity. The unit will trigger an audible, visual and/or haptic alert when a gamma-ray anomaly (increased dose rate or spatial asymmetry) is detected and will activate the directional indicator, pointing towards the source. The operator can proceed to take the unit from its stand and use it as a handheld to approach the indicated person or vehicle and determine the exact micro-location of the radiation source.

CASE STUDY - ON MILITARY VEHICLE The unit can be mounted on a military vehicle (transporter, tank, vessel, drone…), oriented facing forward. The crew is provided with a screen streaming full real-time data from the unit. As soon as elevated radioactivity levels or another anomaly (such as asymmetry) of the gamma-ray field is detected, the remote display starts indicating real-time direction, relative to vehicle, towards the radioactive source.

CASE STUDY – MULTIPLE DEVICES IN URBAN WARFARE In the case of combat in complex terrain, multiple coordinated devices can be used to determine the location of the radioactive source directly from fixed positions. The position and direction information from two (or more) devices are used to do positive triangulation.

CONNECTIVITY Although it is primarily designed to be used as a handheld device, it can be connected (by wire or via switchable Bluetooth) to a smart device, a personal computer (Windows or Linux, Mac OS on demand) or any other digital system capable of serial communication, for complete remote monitoring and control. A dedicated application for a smart device is available and can optionally bridge all communication over the internet for further remote examination or analysis.

SEARCHING FOR PARTNERS

COMPLIANT WITH NATO STANDARDS

Distributors and integrators (e.g. military vehicle manufacturers) are welcome!

9

Arex d.o.o. Trubarjeva 7 SI-8310 Šentjernej T: +386 7 3933 450 E: [email protected]

www.arex.si

Arex is proud of its rich tradition in the production of military gear and weapons. We provide our products to the military as well as the police; however, certain products from our portfolio have been designed for the B2B market. The majority of our products stem from our own R&D. They feature innovative solutions from our R&D team that drives (and generates) continuous development, which is also expressed through the motto of our company “development as a way of life”. We offer products from different categories: AMMUNITION Small calibre plastic blank ammunition (up to incl. 12.7×99 mm) serves weapons training purposes. Plastic blank ammunition as an alternative to metal jacket ammunition provides numerous benefits, especially: lower weight of bullets, less wear and tear of the barrel, the ammunition cannot

We have developed a completely new training ammunition concept under the name MTA – Marker Training Ammunition. The ammunition will be available in various calibres

(9×19 mm, 5.56×45 mm, 7.62×39 mm, and 7.62×51 mm).

visually be mixed up with real ammunition. Our customers can also select from training ammunition of various calibres (Non Lethal rubber bullet ammunition).

10

AMMUNITION LINKS Arex is one of the largest manufacturers of type M27, M13, M9, and MK 15 ammunition links.

Various models of REX zero 1 pistols of the 9×19 mm calibre meet the demands of the widest possible circle of prospective buyers (military, police, shooting sports, security services). In the future, we want to expand the category with additional products with other calibres.

Flexible ammuntion feed chute

WEAPON COMPONENTS AND WEAPONS At Arex, we offer the production of various weapon components in accordance with the customer’s specifications. Based on many years of experience in the production of complex mechanical parts for weapons, we have developed our own weapons taking into consideration the benefits and drawbacks of competitive products. The REX AKB 15 rifle, which is currently only available in the 7.62×39 mm calibre, has been designed based on the widely used AK47 (“Kalasnikov”). The proven platform has been upgraded with a folding and adjustable butt, a front handguard with Picatinny rails for the assembly of tactics add-ons (lasers, flashlights, handles, etc.) and an upper monolithic cover with a Picatinny rail for the easy assembly of various optics and night vision specs. A soldier may thus adapt his rifle to his own body specifications and the mission demands.

11

Armas d.o.o. Koroška c. 14 SI-2390 Ravne na Koroškem T: +386 2 8707 623 E: [email protected]

  www.armas.si

ADVANTAGES OF VERTICAL INTEGRATION ARMAS is independent company exclusively representing defence projects and products. Company is part of a vertically integrated supply chain with control over R&D, engineering and production of defence products. Quality & Flexibility are the decisive factors for selecting materials, parts and components.

PROTAC – BALLISTIC PROTECTION STEELS  Certified and tested per VPAM APR 2006 and STANAG 4569 AEP 55  Various protection levels for range of applications  After sale support (welding & bending recommendation, semi-finished components)  Minimum order quantity is 10t per grade in different thickness  Short delivery times – from 6-8 weeks  Large size plates e.g. 8x2,5m for customer’s convenience → PROTAC 500

→ PROTAC 550

Special steel with high cleanliness and homogeneity

→ PROTAC Mn

Standard antiblast protection steel, with excellent toughness

→ PROTAC 430

Standard 500HB grade, with good bending and welding performances

Advanced Q&T armour plate with higher hardness and excellent toughness

High hardness and toughness for best performance

H: Wear exposure depending

H: 400-450 HB

H: 480-530 HB

H: 514-555 HB

H: 601-650 HB

HIGH GRADE STEELS FOR DEFENCE APPLICATIONS  Nearly 400-year heritage of producing high quality steel grades for various defence applications  Modern steel plant with ESR capabilities, Steel Mill, Forging Shop and Heat Treatment provide us with the means to manufacture the highest quality steel for demanding applications e.g. artillery gun barrels, stressed components, torsion bars  All steel products are put through a series of non-de structive & destructive testing (ultra-sound, magnetic, XRD, K1C) to ensure final product quality and reliability.  The production process is continuously monitored by our certified measuring laboratory thus enforcing the highest quality standards.

12

→ PROTAC 600

ARTILERY AND MORTAR BARRELS / COMPONENTS Among the leading producers of rough-machined and heat treated barrels and other highly stressed artillery components for applications such as: aircraft cannons, antiaircraft cannons, recoilless guns, howitzer guns, tank guns

For 20 – 203 mm calibre artillery: - Barrels - Breach rings - Breech blocks

Finished mortar barrels (50 – 120 mm calibre): - Smooth barrels - Breech rings - Firing pins

HIGHEST QUALITY TORSION BAR  Result of years of experience and in-house R&D  Use of customized high grade TORKA-ESR steel brand  In-house test rig for fatigue testing  Standard endurance testing with max. working angle or endurance test according to customer requirements  Use of modern FEM tools for torsion bars design  Use of XRD device for control of residual stresses

Advantages  Higher durability  Improved amplitude and load characteristics  Superior ride comfort and control

VEHICLES AND WEAPON SYSTEMS  System integration  Components and systems for armoured vehicles Mainte nance and upgrades  New products development & prototyping

Based on the rich experience of production of light armoured vehicles, MBTs and artillery systems, we are offering development and system integration of various equipment tailored to customer’s needs with supporting aftersales activities.

13

BIJOL d.o.o. Livarska cesta 17 SI-2367 Vuzenica T: +386 2 8790 156 F: +386 2 8790 158 M: +386 41 614 345 E: [email protected]

www.bijol.si

Company Bijol d.o.o. was established in 1996, with the main activity of representing, assembling and servicing cranes of the company Palfinger GmbH. Today the company employs 40 full-time workers and some contract workers.

In 2006 the company also renovated other production facilities and built new offices.

Headquarters of the company

PALIFT hook loader on Mercedes-Benz

Company Palfinger with headquarters in Salzburg, Austria is a well-known manufacturer of lifting-loading equipment. Palfinger’s loading technology is powerful because of its excellent kinematics and geometry of mobility. Their products have been continuously improving and with numerous patents and innovations, the company has played an important role in the development of lifting techniques.

This project was followed by number of others such as, purchase of knuckle-boom cranes with baskets for decontamination of vehicles, purchase of special transportable forklifts Palfinger Crayler and also radar systems for which the basics of hydraulic lifting and descending was constructed and manufactured in the company. The cooperation between Slovenian Army and Bijol was not closed with those projects. The company still provides regular services and maintenance.

First project for Slovenian Army was relatively large; it consisted of assembling 48 container handling systems Palfinger Palift on the trucks Mercedes Benz.

Truck mounted knuckle-boom cranes Palfinger and timber and recycling cranes Palfinger Epsilon represent the largest business share in Bijol. The company’s program also consists of tail lifts, aerial work platforms, container handling systems, transportable forklifts, trailers for special transport and for the needs of the Army. In addition to Palfinger, Bijol also represents other companies such as Huffermann, Sennebogen, Exte, Stepa, BMF, MUS-MAX and others.

Bijol has relatively large range of activity, so each customer from this technical field can find something suitable. Company’s staff listens to their customers, advise them and offer quick and efficient services. With their extended knowledge of engineering, they work on difficult projects that require unique solutions. Bijol’s research and development focus is now on multipurpose vehicles, where they are trying to find innovative solutions for using one vehicle for different kind of activities.

In 2004, Bijol gained first business for the Slovenian Army on the public competition in cooperation with company Dumida d.o.o. Within that year a new assembly-services workshop specifically for projects in the military industry was built.

14

Bijol’s references from Military program:

PALIFT load handling solutions

Hydraulic system for mobile radar

Working basket with Decontamination system

Crayler forklift for military applications

Recovery vehicle with two winches and semi-trailer

Loader crane

Loader crane on the Military boat Loader crane

15

Artos Group d.o.o. Beethovnova ulica 12 SI-1000 Ljubljana T: +386 1 2001 770 F: +386 1 2001 772 E: [email protected]

www.artos.si

Artos Group manufactures mobile water purification systems suitable for every water source (eg. lakes, rivers, seas). Water purification technology is based on two different principals of filtration: Ultrafiltration and Reverse Osmosis. These two methods provide clean and safe water, which is compliant with the strictest STANAG and WHO standards.

EWM 1500 and EWM 4000 tehnical features

CAPACITY [l/h] WEIGHT [kg] DIMENSIONS [cm]

Along with custom made solutions, we are currently present in the market with three standard EWM models and RO Hybrid solution.

16

EWM 4000

1.500

4.000

77

320

66 x 80 x 50

169 x 70 x 156

OPERATING PRESSURE

3 bar (300 kPa)

3 bar (300 kPa)

POWER CONSUMPTION

0.9 kW / h

1.6 kW / h

230 V / 50 Hz

230 V / 50 Hz

POWER TERMINAL [standard]

Distinguished quality features:  High capacity  Heavy duty design  Easy portability and mobility  Low operating costs  Energy efficiency  Chemical free technology  Automatic washing of the operation system  Simple use and maintenance

EWM 1500

C-Astral d.o.o. Gregorčičeva 20 SI-5270 Ajdovščina T: +386 5 8500 840 E: [email protected]

www.c-astral.com

C-Astral is an aerospace solutions provider based in Ajdovscina, Slovenia, the “hub” of advanced aerospace development and integration in this part of Central Europe. The field prov-

“The system consists of the air vehicle with a EYE-X sensor, a foldable portable takeoff catapult and rugged ground control station. The system is highly mobile and fits into a

en BRAMOR C4EYE UAS line is appropriate for operations where real-time or near real time video observation and surveillance capability is of utmost importance. With an endurance of up to 3 hours, a standard IP MANET / MIMO digital communications capabilities link of 40 km this is the Ultimate C4ISR Solution – the most capable and affordable small UAS in its class in the world. The industry leading BRAMOR UAS family is electrically powered and is able to achieve superior stability and endurance through its unique advanced Blended Wing Body airframe aerodynamics. The company is a global market leader with established reputation in the specialized, fixed wing small Unmanned Aircraft Systems (UAS) manufacturing and services field, with a specific focus on high productivity, endurance, surveying and remote sensing. C-Astral’s customer base is diversified between the commercial UAS operators, larger institutional networks, scientific users as well as government entities. Currently, C-Astral systems are flying with six sovereign entities on force protection, border protection, fire control and surveillance operations on four continents and more than 100 commercial and scientific operators globally. C-Astral established a multidisciplinary software and hardware laboratory for aerodynamics and systems integration work and a prototyping CAD/CAM workshop facility for composite materials manufacturing and modeling. C-Astral systems are now flying over all continents, including extreme environments such as high altitude open-pit mines, deserts, mountains, Antarctica, over the Arctic and global agricultural lands.

MILSPEC, rain resistant backpack with the GCS embedded industry standard rugged package and is designed for fast deployment, flight ready in less than five minutes. It can be safely operated by single operator/ pilot in command.”

17

Tactical network digital communications HALE UAS

For the demanding conditions encountered in operational uses, C-ASTRAL systems have been integrated with the TrellisWare Technologies, Inc. TSM™ waveform mobile ad-hoc mesh networking capabilities, enabling seamless scalability and network agility in dynamic environments. TSM waveform networking provides robust performance in challenging environments, and can scale from a few radios to hundreds of units in a single RF channel. It uses Barrage Relay™ networking technology, where all radios collaboratively receive and retransmit multihop networking traffic. Sensor data and asset management is available on all tactical and command levels for agile, fast and precise decision making. The C-ASTRAL TSM waveform equipped systems are completely integrated with the MIL SISTEMIKA C4i battlefield management suites and solutions, supporting several interoperability standards.

BRAMOR UAS FLEET

www.milsistemika.com

COMMAND & CONTROL

TACTICAL GROUND FORCES MARITIME COMM

18

MOBILE VEHICLE UNIT

19

Comtrade d.o.o. Letališka 29b SI-1000 Ljubljana T: +386 8 1605 200 E: [email protected]

www.comtrade.com

Comtrade is a dynamic and well established group of technology companies, with a 25-year track record of innovation and steady development of some of the world’s most advanced software. Founded as a software engineering and services company, Comtrade has evolved into a software product business, a services company and a systems integrator.  With world-class infrastructure and campuses in 10 countries, Comtrade operates as a holding company for vibrant businesses as well as an incubator for new and exciting technologies on the cutting edge. With over 2000 customers worldwide, we leverage our history as a service provider to ensure that every customer receives the same high level of quality and service across all of our businesses.

The NATO-owned and operated AGS Core capability provides long range, wide-area ground surveillance utilizing sensors on board of Remotely Piloted Aircrafts (RPAs) operating at a very high altitude. The AGS Core provides continuous near-real-time data on friendly, neutral, and opposing ground forces under all weather conditions using advanced radar detection technology and other sensors. The AGS Core system is composed of an air segment, various transportable and mobile ground stations and a support segment. The Mobile General Ground Station (MGGS) includes several solutions consisting of an exploitation component (MGEC) and a communication component (MGCC). The MGEC is installed in an easily deployable truck-loaded shelter. It has the capability to request, process, store, correlate, display, analyse and exploit GMTI and SAR data as well as other sensor data and exploited products. In addition, the MGEC provides the ability to receive sensor data and distribute data and information either directly from/to connected interoperable NATO and/or national C3I systems through various communication networks or indirectly through the MGCC. Comtrade’s software engineers developed an export/import formatter (e/iF) for various NATO’s geospatial Standardization Agreements (STANAGs) together with the simulators used for the military equipment testbed. They have also contributed to the new database design used by the solution. In August 2016, the solution passed formal software acceptance.

COMTRADE’S SOFTWARE FOR NATO’S ALLIANCE GROUND SURVEILLANCE (AGS) SYSTEM In December 2016 Comtrade announced it has developed a software solution for  NATO Alliance Ground Surveillance (AGS) System as an industrial partner of Airbus Defence and Space under the surveillance of Slovenian Government Quality Assurance (GQA). The solution is a part of the Mobile General Ground Station (MGGS) component of the AGS System which enables persistent intelligence, surveillance and reconnaissance over wide areas with the use of Remotely Piloted Aircrafts (RPAs). 

20

Em.tronic d.o.o. Počehova 12 SI-2000 Maribor T: +386 2 4502 028 E: [email protected]

www.em-tronic.si

CBRN RECONNAISSANCE VEHICLE for Nuclear, Biological and Chemical detection NSN 6640-420000945 CBRN reconnaissance vehicle system has been designed for Chemical, Biological, Radiological and Nuclear reconnaissance.

  

Laser threat detection and warning system; Chemical identification - Mobile Mass Spectrometer and gas chromatograph providing identification capability from any medium (soil, water, air); Visual reconnaissance systems (day and night observation capabilities) and weapon systems;

Entire integrated CBRN detection system with instruments, equipment, hardware and software support can be further customized to fit specific needs and demands of the customer. CBRN RECONNAISSANCE SYSTEM CAPABILITIES:          

Nuclear detection - area and ground contamination monitoring from the vehicle; Chemical detection and outside air monitoring (CWA and TIC detection); Biological detector - provides continuous and real time BWA detection capability; Remote (stand-off) infrared chemical detection. Automatic, real-time monitoring of all known CWAs and important TICs - up to a distance of 5km stationary or on the move; Sampling System - fully automated and remote con- trolled sampling system for collection of samples; Sampling wheels for surface sampling and detection/ identification capability on the move; Marking System – automated, operator controlled marking system for contaminated areas; Meteorological station with GPS - providing all required meteorological data to the system; Central computer system for the operation and control of all data collected from sensors; CBRN Software – fully integrated CBRN software system for the operation and control of sensor systems, data acquisition, alarm monitoring and reporting;

21

STAND ALONE – N.B.C. DEFENCE DETECTION SYSTEM NSN 6665-420000599 Stand Alone is a detection system for N.B.C. defense, for observing and protecting important buildings, for protecting people against possible N.B.C. attack with weapons for mass destruction. Independent Stand Alone Units are placed on the field and automatically send data to the Control Station for N.B.C. monitoring.

Rugged computer with software interface enables instrument control and data transmission over radio to the Control Station. Control Station enables on-line monitoring and visualization of Stand Alone Units, visual and audio alarms, saving alarm events into database and sending NATO standardized ATP45 messages.

Stand Alone Unit consists of two cases. A battery is integrated in the power supply case and takes care for autonomous operation of the unit. Instruments for Chemical Warfare Agents (CWA’s) detection, Biological Agents detection and Radiological detection are integrated in the measuring equipment case. A meteorological station is used for measurement of wind speed, wind direction, humidity, air temperature and atmospheric pressure. Compass is integrated in meteorological station and is used for measuring wind direction according to North. GPS determines Latitude and Longitude of placed system in the field.

22

DEPLOYABLE CHEM / BIO LABORATORY CHEMICAL LABORATORY NSN 6640-420000945 BIOLOGICAL LABORATORY NSN 6640-420000948 Deployable CHEM / BIO Laboratory is designed for de¬tection and identification of Chemical Warfare Agents (CWA), Toxic Industrial Chemicals (TIC) and Biological Warfare Agents (BWA). Laboratory combines functionality, efficient use of space, flexibility with BSL-3 containment and capability for fast on-site diagnostics. In the case of attack with weapons for mass destruction a rapid and effective response with correct identification is extremely important. and safe working environment. Crew consists of CBRN detection operator, chemical and biological analyst. System enables detection and identification of Chemical Warfare Agents, Biological Warfare Agents and radiation monitoring inside and outside the vehicle.

MOBILE CBRN LABORATORY Mobile Laboratory is an integration of a truck and a container, which is fixed to the vehicle. Container is made of insulating material and divided in three compartments: engine room, entrance and laboratory. Chemical analysis with Mobile Mass Spectrometer, air-surface probe and gas chromatograph provide identification capability from any medium (soil, water, air). Biological detection enables automatic start of air sampling for further PCR analysis inside glove box.

The laboratory is air-conditioned and pressurized. Filtration and overpressure system protects against CBRN agents. Positive pressure assures clean air in the laboratory as well as the negative pressure in glove box assures clean

The CBRN mobile laboratory can be further customized to fit specific needs and demands of the customer.

23

Dat-Con d.o.o. Cvetlična ulica 52 SI-3313 Polzela T: +386 3 7033 300 M: +386 41 710 033 E: [email protected]

www.dat-con-defence.com

SMART SOLUTIONS FOR BORDER SURVEILANCE Company Dat-Con has more than 20 years of experiences with different special border observation system. Wide knowledge and different skills enable us fast reaction regarding demands on the market and special requirements of final customers.

We provide customised solutions for land, sea and air security observation, where mobile observation systems, stationary observation systems and UAV systems work together in combination. Systems work in combination of thermal camera, day night camera, special software SOVA, Radar systems, LRF …

24

More than 1500 km of Schengen border is equipped with our systems. Mobile systems can be provided as various vehicles with different special security equipment. Vehicle can be suggested by final beneficiary, and we can integrate equipment after their demands also on their location. Some of integrated

equipment is developed and produced in-house, but some can be bought just for this project. Every vehicle is customised. Usually thermal camera is integrated in combination with day/night camera, special software SOVA that sends all information in command and control centre, and some communication equipment. Radar is also an option. Inside bigger vehicles (like Vans) we usually make mobile office for 2 people with all comfort as they would have in normal office.

Stationary systems enable long range observation (up to 40 km) and are usually placed on some high strategic spots. They are very good solution for green or blue border observation, where we have flat area.

It is a very efficient tool. It is simple, effective and easy to use. Its architecture is Client-Server based and runs on Windows (32 or 64 bits) operating systems. Server functions as a connection point for all subsystems (Day/Night cameras, Ther-

Portable observation systems are used every day by police and military to protect areas of interest. BOPAS is a remote control target acquisition system with manual and automatic

mal cameras, Pan-Tilt, LRFs, etc.) and a distribution point for data (System parameters, diagnostics, imaging, etc.) to all connected Clients.

monitoring capabilities. Compatible with all leading manufacturers of multisensory camera systems makes it ideal for integration. It has more than 12 hour of autonomy and can be controlled from other location. It is very robust and easy to use system. Command and control software SOVA is a compact module based software package developed specifically for the border police, coast guards and navy applications.

25

We develop and produce our line of Pan Tilt systems. Ranging from the smallest most compact to heavy duty units, DAT-CON Pan-Tilt systems deliver high performance for payloads up to 120 kg. Gyro stabilization and target tracking modules are available and perform with accuracy better than +-300urad in the most demanding conditions. High power to weight ratio and compact size make them suitable for stationary as well as mobile solutions. All systems are IP66 compliant and suitable for all land, air and sea applications.

DAT-CON pan tilt systems have been in daily use protecting the Schengen border 24/7 for more than 10 years.

26

MULTI SENSOR – DC is optimal solution for border and coastal surveillance applications. Multi sensor is composed of Day/Night Camera, Thermal Camera and some other possible payloads (LRF, Radar, GPS, digital compass…). Day/Night and thermal cameras are installed on the same optical axis with a deviation of less than 0.05 dgr. The videos from both Day/Night and thermal cameras are available simultaneously as digital video MPEG4 or H.264. MS includes a built-in test and status mechanism. All video distribution to viewing workstations is done digitally, with very low latency.

27

GUARDIARIS d.o.o. Podjunska ulica 13 SI-1000 Ljubljana T: +386 1 2303 030 E: [email protected]

www.guardiaris.com

OUR VISION Battlefield survivability depends on knowledge and experience, which is gained through constant and efficient training and education. Nowadays troops are taken to training and simulation facilities located far away. But such logistics is costly and time consuming. Training is fundamental to every soldier and therefore it should be brought to them. Our vision is mobile training.

OUR GOAL Our primary goal is to provide our customers with superb mobile training and simulation products. Our team develops and manufactures the most innovative and cost-effective mobile training and simulation products that can easily be deployed anywhere at any time. To achieve this goal, we carefully analyze the customer’s needs and requirements, ensuring they get tailor-made product far beyond their expectations, regardless of how unique their requirements are. Our products are designed to be light and cost-effective, covering various training possibilities ranging from exact replicas of small arms to heavy weight vehicle simulators. Our ambition is to train the brain, anywhere at any time.

28

Our GUARD All our products are powered by proprietary cutting-edge real-time simulation technology registered under the GUARD trademark. Guard has an abstract, platform independent and fully modular architecture supporting full interoperability and all other modern training and simulation needs and requirements. The modular design ensures rapid product development and upgrades with short time-to-market. Guard offers fully functional interaction in the virtual environment with complete visual and aural information for full trainee immersion. Diversity in the execution of highly realistic and demanding exercises is ensured by a large database of VR objects and environments. 360° VR environments cover urban, forest, jungle and desert areas. Our team is able to create customized VR environments based on the customer’s inputs, taking into account geographical and architectural specifics. Photorealistic visuals, superb audio and video effects accompanied by real-time simulation present an exquisite training experience. Guard moves the boundaries of digital training even closer to real battlefield perception.

29

University of Maribor Faculty of Electrical Engineering and Computer Science Koroška cesta 46 SI-2000 Maribor T: +386 2 2207 000 E: [email protected]

www.feri.um.si

to achieve higher energy transfers with efficiency of 88% and decrease the time required to achieve balance with less than 3 mV.

UM FERI – Faculty of Electrical Engineering and Computer Science at the University of Maribor is one of the leading research institutions in the fields of Electrical Engineering and Computer Science in Slovenia. LABORATORY FOR ELECTRONIC AND INFORMATION SYSTEMS (LEIS) In cooperation with European Space Agency, LEIS provides specialized development and verification of miniaturized on-board data handling electronic systems for use in aerospace applications, including tolerant by design FPGA and IC circuits with various communication interfaces, and embedded software. In addition, we also provide capabilities for thermal cycling, electromagnetic compatibility pre-compliance tests, embedded RF design including antenna design and simulations.

Multichannel signal simulator of global navigation satellite system simulates all the necessary signals in real time and transmits them through software-defined radio. It allows simulation of several scenarios, which include simulation of static position anywhere on Earth, travelling pre-defined path and travelling of space object in LEO up to 1000 km above sea level.

TRISAT nanosatellite mission was an important step towards internationalization of the Slovenian space industry based on mutual cooperation with Slovenian university. It helps to facilitate knowledge and technology transfer between the university and the economy through innovations & technologies and with effective support service of entrepreneurship & innovative ecosystem.

LABORATORY FOR SIGNAL PROCESSING AND REMOTE CONTROL (SPaRC) In scope of this mission, a high-performance and high-reliability Analog Maximum Power Point Tracking (MPPT) algorithm based on Perturb and Observe algorithm was developed and implemented as an analogue circuit for use on a satellite relying on solar power generation within a Low Earth Orbit (LEO). In addition, an improved High-Reliability and High-Performance Autonomous Charge Equalization Circuit for use with in Series Connected Battery Cells was developed

Research activities of SPaRC focus on developing small radars and processing of radar signals. The miniature continuous wave frequency modulated radar was used for the through the wall imaging, soil moisture estimation, terrain roughness estimation and it was used as Synthetic Aperture Ground Penetrating Radar (SAR-GPR). The goal of the activities is to develop imaging algorithms for small radar as for example, Inverse Synthetic Aperture Radar for localizing RFID

30

nodes and indoor localization of objects and nodes or identifying types of materials using existing wireless technologies. Recently, indoor navigation using existing Wi-Fi technologies enable to automatically localize nodes within indoor environment with centimetre accuracy.

the countries regarding the quality of their national DEM and DTM, providing good basis for more realistic 3D military training simulations, monitoring and operation planning on the Slovene territory. LiDAR data classification further arranges non-ground LiDAR points into several categories, including houses, bridges, trees and power transmission lines, opening new possibilities in simulations, monitoring and planning. Feature extraction goes a step beyond the classification by attaching points to individual objects. The extracted trees and power lines may for example improve drone controllers and flight simulators. A related application of surface segmentation attaches points to separate surfaces, e.g. walls, floor etc. In combination with a terrestrial LiDAR, it may importantly support indoor navigation.

The ongoing NATO – Science for Peace project focuses on landmine detection attached to the hexacopter. The goal is to develop a small, lightweight GPR hardware, which enables sparse random frequency radar and imaging algorithm interpreted and localize mines in the fields.

The remote sensing based on Radar techniques has been research activities of SPaRC for the last 20 years. Data understanding and interpretation is the most important for the end users, therefore, algorithms for information extraction are developed. Recently a patch-based approach to the categorization of Synthetic Aperture Radar is performed using deep learning.

Photovoltaic potential estimation using LiDAR data aims to assess suitability of buildings’ rooftops for setting photovoltaic plants, but the same method can assist fulfilment of energy demands of army units. The utilized shadowing from surrounding obstacles is inverse to the visibility problem closely related to defence and security. Similarly, our wind potential estimation using LiDAR data and computational fluid dynamics is primarily aimed to assess suitability of locations for wind power plants, but it can find applications in defence, security and protection as well, including poison gas, fire or radiation propagation, drone flight planning etc.

LABORATORY FOR GEOMETRIC MODELLING AND MULTIMEDIA ALGORITHMS (GeMMA) GeMMA developed competencies in spatial data processing, GIS, scientific visualization, data compression, simulation of green-energy resources, big data processing, predictive analytics, and data mining. Advanced methods for processing large datasets acquired by light detection and ranging (LiDAR) remote sensing technology represent our core activities. These methods were integrated into various applications with great potential in the areas of defence, security and protection. Our algorithms for digital terrain model (DTM) and digital elevation model (DEM) generation place Slovenia to the top of

31

University of Ljubljana Faculty of Mechanical Engineering Chair of Modelling in Engineering Sciences and Medicine

Aškerčeva cesta 6, SI-1000 Ljubljana T: +386 1 4771 200 E: [email protected]

www.fs.uni-lj.si

The members of the Chair of Modelling in Engineering Sciences and Medicine (CmESM) have contributed to a number of R&D projects and tasks together with other chairs and laboratories from the Faculty of Mechanical Engineering at the University of Ljubljana, and with partners from Slovenian and foreign companies and institutional partners. Members of the chair specialize and are competent in different fields of mechanical design: geometrical modelling (3D CAD), technical documentation, GDT, tolerance stack analysis, sensitivity analysis, finite element model (FEM) analysis and simulation, material models, multibody systems analysis, mechanisms, mechanical elements design and analysis (rolling bearings, gears, bolt connections, etc.), vehicle theory and dynamics, several areas of computer simulation, and mechanical experimental techniques.

Design improvement of blast resistance trash receptacles Blast lFinite element analyses of bullet plate perforation

Blast loading experiments are among the most expensive because of their harsh environment and a large number of experts involved in the tests. In some cases, very strict safety requirements and additional governmental permissions are needed, making the numerical approach the only reasonable and valuable tool for examination.

Blast response of structures is of great importance in military applications. However, civil and governmental structures are becoming more exposed to blast loads, as a result of increased possibility of terrorist attacks especially in the last two decades. Whatever the structure under investigation,

FEM response analyses of light armored vehicle (LAV) Valuk 6x6 under 6 kg TNT blast

32

blast loading model should be verified first in order to be successfully used for examination. For that purpose, we have developed very powerful and sophisticated numerical models for advanced analyses, which can be used for examination of mechanical as well as civil structures. We also have experience in modeling advanced higly nonlinear processes involving fracture initiation, its development and final size. Precise and accurate finite element (FE) analyses require precise material models as well as parameters of the materials involved in the process. Therefore, we also specialize in static, dynamic as well as fatigue material characterization for which advanced techniques such as acoustic emission as well as image analyses are

With the use of high-speed video cameras (FASTCAM Ultima 512), recording and comparison of many high-speed processes is possible.

Instrumented Charpy test vs. numerical result comparison

Commercial as well as our own software tools enable formulation and application of mechanical and mathematical models of vehicles and assemblies thereof. Such models are applicable for simulations at different levels of complexity and speed of computation. We have developed a software tool i3Drive, which enables simulation of a wheeled vehicle ride on an arbitrary terrain. The i3Drive software tool is connectable to a haptic interface (active seat, active steering wheel) which provides the user with the feedback through the displacement of the seat or the force/moment applied on the steering wheel. We also specialize in building and implementing detailed geometric, mechanical (MBS) and mathematical models of wheeled vehicles.

33

Additionally, we carry out experimental validation of these simulation results.

We have also developed a module for the simulation of system dynamics based on the multi-rigid-body system approach which shall be widely applicable for the simulation of all elements of the human-vehicle-roadway system.

Model verification and optimization were performed based on impact tests on a purpose-built sled test device. The model is robust and computationally efficient and hence appropriate for parametric analyses of critical traffic situations. Based on the determined load flow and injury criteria, the model can predict injuries to vehicle occupants and other road users for different traffic accident scenarios. Preliminary design optimization of products before testing and production in some cases can be very cost effective. The staff at the Chair of Modelling in Engineering Sciences and Medicine are interested in joint cooperation on various R&D projects in the aforementioned and related fields as part of bilateral cooperation with companies and institutions of interest as well as international project consortiums.

Geometrical models of various vehicle types have been produced for the purpose of a display in a virtual 3D environment. They are applicable for a display in various software tools (commercial and our own developed ones). Numerical simulations based on the multi-body system (MBS) and the finite element method (FEM) are two types of computational methods used for simulating the human body response during traffic accidents or other mechanics loadings. Using these techniques, our research group has developed the MBS model of a human body that consists of interconnected body segments the relative movements of which are limited by resistive joint properties. Geometrical and mass properties of individual segments are determined through a CT scan with CAD reconstruction.

34

ISKRA d.d. Stegne 21 SI-1000 Ljubljana T: +3861 5131 000 E: [email protected]

Iskra is a globally recognized provider of intelligent industrial solutions and cutting-edge electro-technical products. We are high-performing company with long innovative tradition, wide engineering knowledge and experience with the most demanding industrial projects. Always ready to offer the best system integrated solutions to optimize your business. Your security, efficiency and success is our focus and priority. For 70 years, Iskra has been the largest knowledge hub in the region, developing one of the most demanding projects. Our solutions can be found in all continents of the globe and usually represent the crucial system building block in various industries. Iskra of tomorrow will represent a superbly-established global supplier that will dictate the most sophisticated technological trends and new business models. At the same time, Iskra will continue to work toward a sustainable development and contribute to a higher life quality for its employees and wider society. The constant growth of traffic, increasingly expanding road network and an increased level of services call for greater safety, better supervision and more efficient centralized traffic control. Based on know-how, experience, and available modern technologies, our experts provide answers to the most demanding questions in connection with the safety of modern transport. Iskra traffic solutions covers Urban Traffic automation, Motorway traffic automation, Smart roundabout, Smart street lighting system and Railway traffic automation. We are experts and leading professionals in the field of efficient traffic management, supervision and control. Today Iskra combines a unique combination of engineering knowledge and technological know- how. Our system solutions are effective in controlling urban and highway traffic. Modern Center for Automat-

www.iskra.eu

ic Traffic Management is a product of our own knowledge and development. It is used not just for control, but also for optimal traffic flow and traffic management in urban areas. Iskra provides holistic industrial solutions (instruments, software packages and services) for energy sector to help you achieve the most ambitious and challenging targets. Iskra’s technological solutions for energy sector – the result of our own know-how. We provide our clients with systematic control, protection and management over power systems and operations. We poses exclusive knowledge about Power Quality Management, Efficient and effective energy use, Tools for analysis, monitoring and forecasting energy consumption with easy access to reliable data via our and Remote Monitoring Software. Integrate very complex solutions in telecom industry was our challenge from 1948 and on. Our main target are telecommunication solutions in industry and national infrastructure. We are also present in enterprise area, mostly with integration of advanced IP solutions. Iskra Telecommunications division consists of four business lines: transmission Systems (microwave and optical transmission networks), IP Networking (routing, switching and network security), power Line Communications (voice and data communications over high voltage power lines), telecommunications in Defense.

35

Iskratel, d.o.o. , Kranj Ljubljanska cesta 24a SI-4000 Kranj T: +386 4 2070 000 E: [email protected]

www.iskratel.com

Today, it is incredibly easy to gather information and access actionable intelligence. But at the same time, it has also never been harder to keep the enemy from doing the same. And that is bad news for anyone tasked with safeguarding people’s lives from enemies, foreign or domestic. One particular area of special concern is public infrastructure. Modern security threats often abuse and exploit access to public and other telecommunications networks in order to execute harmful actions and delay or hinder first responders and security forces. As societies strive to become more responsive to citizens’ needs, they turn to more flexible IP networks in order to be able to deliver converged voice, video, and data services. They are seeing a shift in market demands from a reactive management approach to a proactive monitoring and management solutions.

Operations centres typically gather data and video feeds from different locations and these multiple data sources traditionally result in a number of monitoring areas and display screens. Imagine that you could also have the ability to track events in public areas in real time. Using thousands of sensors that constantly look for threats and which do not just flood operators with streams of video delivered to tens of separate monitors. Iskratel’s Safe City Operations Centre enables monitoring and control of dynamic activities as real-time video feeds, critical communications, image processing, data integration, and various alert signals. Making sure attention is given to that, which matters. Shutting down public telecommunications networks and routing communications to dedicated emergency response channels. The platform offers a unified management experience for city infrastructure, simplifying control room operation and system integration. It also minimizes total cost of ownership, and increases operational efficiency for rapid decision-making.

36

Information flows between citizens, first responders, and agencies is the intelligence that makes societies safer. Iskratel can help you collect more data, make it actionable and securely distribute it across mission-critical devices and easyto-manage networks. It’s the technology and expertise that turns various data from sensors into information and then information into intelligence. And it’s how to do the absolute most with less — build safer cities and societies that thrive. Replacing outdated and vulnerable legacy systems with Iskratel’s digital radio technology (TETRA, DMR, LTE) puts everyone on the same page, but prevents the enemy from reading the book. This is crucial during high-alert situations and crisis management, during disaster-relief efforts and while tackling major incidents.

Iskratel’s technology facilitates better co-operation with border guards, police organisations, fire- and ambulance services, paramedics, or the Red Cross. It also handles support functions such as logistics and maintenance, training camps and military exercises. They also completely change the game in terms of how various military and civilian agencies interact. They make data flow faster, more reliably and securely. Adopting these new critical communications systems in “non-combat” communications holds many advantages. You get a cost-efficient, off-the-shelf solution, enhanced with purpose-built features and services, eliminating the need to use expensive combat radio communications systems when supporting civilian agencies. Responders can efficiently exploit highly reliable voice, video and data communications in a robust-yet-lightweight, user-friendly mobile device. With 70 years of experience, Iskratel is the leading European provider of info-communications solutions, with its own R&D and manufacturing centres, 900 employees and local presence in more than 30 countries. Iskratel delivers integrated telecommunications solutions for telco, transport, public safety, defence, and energy industries.

Iskra pio d.o.o. Industrial equipment manufacturer Trubarjeva cesta 5 SI-8310 Šentjernej T: +386 7 3931 400 E: [email protected]

www.iskra-pio.si

Iskra PIO is a progressive European company active in the clean and cleaning technology. We have 25 years experience in project development, engineering, production, validation and servicing of equipment. We are specialized in the producing and integration of laboratory equipment in to the mobile container laboratories, including glove boxes and microbiological safety cabinets. CBRN mobile laboratory container The CBRN mobile laboratory container, from Iskra PIO is a fully equipped mobile laboratory used for the detection, analysing and identification of chemical warfare agents, toxic industrial chemicals, radiological and nuclear materials. Mobile laboratory will provide a workspace in which operators

use of laboratory equipment, including Class II and Class III Biological safety cabinets, pass-through containment boxes and analytical equipment essential for working safely and effectively with chemical, biological or radiological hazardous materials. Features  Laboratory is built into speciality 20 ft ISO shipping con tainers for easy global deployment , also it is self contained  HVAC systems and controls, including HEPA and NBC filtration  Glove box, from Iskra PIO, with under pleasure HEPA and carbon filtration, could be used for low level alpha an/or low level beta particle containment  Autonomous system for lift and lower on truck platform, with hydraulic legs  Electrical generator supplied approximately 96 hours on one tank of fuel  Thousand litres of onboard water

 Sinks drain into holding tank for lateral disposal

 Inner walls, floors and ceiling made from stainless steel sheets  Outer chassis is air tight, coated with pigmented polyurethane (CARC) coat  Eye wash station  Laboratory furniture  Laboratory material

 Weather monitoring station

 GPS tracking location system Basic instruments for radiological laboratory

can work safety, regardless of the environment. It can be deployed/pre-positioned where there is a risk of radiological, biological or chemical terrorism or to support public health missions such us influenza outbreak or natural disaster response. It will provide military units and first responders with a facility for emergency response, where they have the

 α, β aerosol, liquid and soil monitoring

 high sensitivity Gamma Area monitoring  Gamma spectroscopy facility  Personal dose rate meters ...

37

Another field of application is ultrasonic gun and rifle cleaning. Quickly and effortlessly removes dirt, carbon and grease even the most soiled guns. Ultrasonic waves penetrate deep into those hard to reach places for thorough and effortless cleaning.

Ultrasonic cleaning equipment Ultrasonic cleaning technique is an efficient one because of the fact that it sends sound waves throug h the water in an ultrasonic bath that ignites the cleaning process. A huge amount of minute bubbles, or often known as cavitations at times, are formed and then collapsed because of those sound waves. This creates many small jets moving through the cleaning liquid. These jets are used as a brush to wipe off the dirt from the object you are looking to clean. This results in ultrasonic cleaning of various objects within the cleaner. Ultrasonic is very helpful when it comes to cleaning objects that cannot be cleaned otherwise and you do not need to rub or polish these objects. There are many considerations important to ultrasonic cleaning. Optimizing these variables will produce the best cleaning. The most important decisions to be made are choosing the proper cleaning solution, cleaning at the right temperature for the correct amount of time, and choosing the right size and type of ultrasonic cleaner. Iskra PIO have good technical and technological solutions with a background in maintenance and cleaning of military component parts. We are leaders in the field of ultrasonic cleaning and disinfection of respiratory equipment (breathing masks, ....).That method removes body fluids , soot, toxic substances and debris from hard to reach areas, restoring parts to factory new cleanliness.

38

Microbiological safety cabinets The microbiological safety cabinets assure a high safety level for operators, surrounding the product. The cabinets are manufactured according to requirements of SIST EN 12469:2000 standard. Iskra PIO has more than 20 years of experience in safety cabinets design and manufacturing. We have the ability to offer reliable and user friendly cabinets adapted to the requirements of the user.

Microbiological safety cabinet executed in protective class II according to EN 12469:2000 and DIN 12980:2005 assure ISO 5 (ISO 14644-1:1999), class A (GMP) clean conditions inside working area. Clean conditions are assured by H14 (EN 1822) HEPA filtration of recirculating and exhaust air. Laminar vertical air flow in working area and air curtain on the front aperture assure controlled clean conditions in the chamber and prevents material leakage from the chamber.

Validation We perform validations to confirm clean and safe working conditions. We have a qualified team and annually calibrated measuring devices for validations.

Microbiological safety cabinet executed in protective class III according to EN 12469:2000 assure safe conditions to operator, environment and product during handling hazardous materials. Safety is assured by  Hermetically sealed construction

 physical barrier between operator and process – work is executed through gloves attached to chambers wall  Controlled negative pressure inside working chamber  H14 (EN 1822) HEPA filtration of inlet and double H14 HEPA filtration of exhaust air  Air flow according to standard EN 12469:2000

After the process we prepare validation report, which is acceptable for inspection services. Following tests can be included in the validation tests:  Airborne Particle Counts  Filter in Place Leak Test

 Air Flow Volumes/Air Change Rates  Temperature/Humidity Test  Room Pressurisation Test  Smoke Patterns

 Light Levels and Noise Levels  Leak test

 Recovering time  KI-DISCUS test  OEL test

 Sensors calibration  …

Additional safety is enabled by an automatic disinfection system integrated in cabinet’s construction and software. Design and construction of safety cabinets for military use is adjusted to assure maximal reliability in most demanding environments.

39

IZOP-K d.o.o. Hrašče 23 SI-5272 Podnanos T: +386 3 1278 300 M: +386 41 794 895 E: [email protected]

www.izop-k.com

LOGISTIC STRUCTURE

IZOP-K is representing partners for lightweight armor soldier architecture, EOD suits, explosives, tanks, aerospace, vehicles, ammunition and pyrotechnics.

The company is known over the world as a byword for responsibility, performance and commitment. The distinctive feature of IZOP-K is inside its own facilities which constitutes services of:  storage and manipulation explosives, ammunition, arms  special production of military components and defence industry demilitarisation and recycling of conventional munitions Our experience covers everything from small arms ammunition up to large and more complex items such as those containing White Phosphorous, CBU’s, Sea Mines, Anti Personnel Mines, Anti Tank Mines and rock- ets. The IZOP-K team consists of engineers and laboratory technicians from the following fields:  arms production/destruction engineering  hazardous materials’s processing engineering logistics engineering Issuing land and overseas logistic services, supported with facilities in option to store 750T NEM of goods (ADR 1.1 - 1.6) both palletized and containerized. Trading with explosives, ammunition, vehicles, arms. Helmets for military purpose are designed, produced and tested in accordance with the standards. Severe inspections concerning both raw materials as well as production process guarantee, for each helmet, the fulfillment of the technical specification of quality, re- liability and safety. Production unit conforming to GMP and ISO stand- ards, safe rooms, a well-equipped laboratory, remote controlled detectors, test facility with a high safety lev- el and storage facilities secured according to military standards.

40

The SX-1 MTR is the result of thousands of R&D hours, material selection and testing, engineering prowess overseen by gunsmiths and dedicated professionals from around the world. The SX-1 MTR gives the shooter options and versatility unmatched by any other product.

WHEN IT COMES TO ACCURACY, DURABILITY, MODULARITY, AND DEPENDABILITY, THE SX-1 MTR IS SIMPLY THE BEST RIFLE OF ITS KIND.

The SX-1 MTR features a patented barrel changing and caliber conversion system. Extremely simple, the change can be performed in the field within minutes. To make the SX-1 MTR even more relevant, its modular design can easily be configured to be used with various magazines, buttstocks, grips, trigger mechanisms, muzzle devices and other accessories. Chambered in .308Win, the SX-1 MTR will accept SR-25 or AR-10 magazines. Or, by simply changing the mag well adapter, 5/10 round AICS magazines. The same flexibility extends into the .300 Win Mag and .338 Lapua Mag calibers.

 308WIN

AVAILABLE IN:  300 WIN MAGNUM  338 LAPUA MAGNUM

In the world of accuracy-driven rifles, the market is full of competitors. The new benchmark, set by Ritter & Stark, raises the bar. R&S rifles are produced in the ultimate state-of-the-art facility using only the finest machinery, technology and patented innovations.

41

PX-3350 - BLAST MITIGATION

PX-2100 — SPALL PROTECTION

PAXCON® by LINE-X® offers a revolutionary development in blast mitigation. Known in military and research circles as an Energy Resistant Coating (ERC), the PAXCON coating is flexible, yet stronger than steel. This means that walls outfitted with PAXCON material can withstand explosions up to 20 times greater than a normal, uncoated wall. In the event of an explosion, the PAXCON-coated walls flex, but stay together.

During a ballistic attack, most severe injuries occur and a significant amount of lives lost are due to ballistic fragmentation or spalling. PAXCON® solves this problem by encapsulating the fragments, which will remain trapped in the PAXCON material, posing no secondary damage.

42

• anti-soiling CORDURA® is a trademark of INVISTA for durable fabric.

Predilnica Litija d.o.o. Kidričeva 1, 1270 Litija, Slovenia Tel: +386 1 89 90 200 Fax: +386 1 89 90 248 E-mail: [email protected] www.litija.com

Predilnica Litija d.o.o. Kidričeva 1 SI-1270 Litija T: +386 1 8990 200 E: [email protected] 13.HSI.33641

HOHENSTEIN HTTI

The information contained in this publication has been prepared to the best of our knowledge. However we accept no liability whatsoever

www.litija.com

MISSION READY YARNS M I S S I O N R E A D Y YA R N S Predilnica Litija

Predilnica Litija is a producer of special yarns made of natural and synthetic fibers and their blends, established in 1886. and their blends, established in 1886. Together with our partners we are capable to offer Together with our partners we are capable to offer also high performance protective clothing which protects people (soldiers, firefighters, policemen) from fire, cuts, bad weather conditions or electromagnetic waves. STANDARD MILITARY UNIFORMS

MILITARY UNIFORMS FOR SPECIAL COMBAT FORCES

MILITARY UNIFORMS FOR withSPECIAL Meta-AramidsCOMBAT in 100% and inFORCES blends with

STANDARD MILITARY UNIFORMS Durability, comfort, lightweight strength ® Durability, comfort, lightweight in CORDURA brand qualifying yarnstrength blends by

modacrylic in etc. withmodal, Meta-Aramids 100% and in blends with

cotton long staple and INVISTA T420 polyamide

6.6® for fabrics. in CORDURA brand qualifying yarn blends by cotton long Fabrics staple made and INVISTA polyamide with Litia T420 qualifying yarns, can be promoted as CORDURA fabrics if they meet 6.6 for fabrics.

• modal, modacrylic etc.

non-melt and folding endurance

• • additional ESD and EMS protection with non-melt and folding endurance

required CORDURA brand fabric quality standards.

Fabrics made with Litia qualifying yarns, can be promoted as CORDURA fabrics if they meet required CORDURA brand fabric quality standards.

• additional ESD and EMS protection with

ABRASION RESISTANCE comfort, durability, lightweight strength

•

level with Cell Solution® Protection • Regulated IR remission with

IR REMISSION

APPROPRIATE FOR ALL MODERN AND CONVENTIONAL CAMOUFLAGE PATTERNS

ADDITIONAL CAPABILITIES

TOP QUALITY FINISHING

Yarns can be delivered so they offer:

• hydrophobic • oleophobic • anti-insect • anti-soiling

• • anti-static properties CORDURA® is a trademark of INVISTA for durable fabric.

Predilnica Litija d.o.o. Kidričeva 1, 1270 Litija, Slovenia Tel: +386 1 89 90 200 Fax: +386 1 89 90 248 E-mail: [email protected] www.litija.com 13.HSI.33641

HOHENSTEIN HTTI

The information contained in this publication has been prepared to the best of our knowledge. However we accept no liability whatsoever

43

LE TEHNIKA d.o.o. Šuceva 27 SI-4000 Kranj T: +386 4 2020 280 E: [email protected]

www.cryocoolers.eu

CRYOGENICS IS ONE OF THE LE-TEHNIKA’S PROGRAMS OF HIGH TECHNOLOGY EQUIPMENT With almost 30 years of experience we have become experts of cryogenics and have specialized in the development for technology of miniature cryogenic coolers, their production, composition of components and their integration into the complex systems. According to the business strategy of the company, we are operating with more than 15 countries worldwide. We present our cooling systems at conferences or at trade fairs such as SPIE, EUROSATORY, DSEI and others. The main products of our program include specialized miniature coolers based on the Joule -Thomson effect (self-controlled, fixed orifice, actively controlled, fast cool down, nonstandard) and coolers based on Stirling process (rotary drive).

STIRLING CYRO COOLERS

Miniature highly efficient cryogenic coolers are designed for cooling infrared detectors other special elements and filters used in various fields of industry and other purposes.

44

JOULE THOMSON COOLERS Typical applications:  Cameras for night vision (IR)  Missiles with IR head  Special filters in the base stations  Cryosurgery

Le-tehnika has received prestigious national and international enterprise awards earned for specific achievements and have international certification marks such as ISO 9001 and ISO 14001 standards, which provide high quality management.

Products are made on request for specific needs of the client.

Clean room production line.

45

MVM TEL d.o.o. Stegne 21C SI-1000 Ljubljana T:  +386 1 2927 820 M: + 386 41 798 456 E: [email protected]

  www.mvmtel.com

ABOUT OUR COMPANY MVM TEL d.o.o. is a leading provider of innovative niche telecom-market solutions for telcos and public safety organizations (mission-critical). Our team builds on almost thirty years of experience in R&D and very close cooperation with end users. Our systems are carefully designed for ultra- low power consumption and can therefore be powered remotely or via batteries, solar panels, and other options. We’re dedicated to providing the best quality, value, and service to meet our customers’ needs and to make their business a success, always coming through for them. www.mvmtel.com

ABOUT OUR PUBLIC SAFETY SOLUTIONS In disaster situations the functioning telecom networks are of vital importance. Loss of telecommunications can completely paralyze rescue operations. However it happens many times that even dedicated public safety networks fail in emergency situations. That is why an alternative communication system is an absolute necessity for every civil protection organization. APM-40 system is an excellent complement to the existing system of public safety telecom networks. APM-40 allows for a rapid deployment of voice communication network in disaster affected areas even when all other infrastructure (telecom, critical, electro- energetic) is down. APM-40 is a fast and reliable solution for establishing a comprehensive telephone network quickly and simply. All you need is a pair of copper/steel wires (filed wire) and several APM-40 telephone terminals. Each APM-40 terminal represents a simple building block of the network and is strung along wires up to fourteen (14) kilometers long. APM is a fully decentralized system. Each APM- 40 telephone terminal has embedded PBX and MUX functionality, which means you can gradually build a network of two to forty telephones without any need for a centralized unit.

46

The network makes it possible to carry on seven duplex voice conversations at the same time over one pair wires (field wire). It also allows conference and broadcast calls, and features many PBX functionalities. Due to extremely low power consumption the APM-40 can work with a set of standard AA batteries for many weeks. Optionally can be powered locally (small solar panel or batteries), which ensures total independence from the electricity network. Furthermore, it is possible to make connections (via a special APM-40/I gateway unit) to another APM network, to a PSTN network, and to radio networks. All of these features make APM a comprehensive, easyto-install, and easy-to-use means for establishing a voice communication network under exceptional circumstances. Quickly established and efficient communication between disaster relief forces enables them to fulfill their responsibilities to alleviate the suffering and damage caused by disasters such as floods, earthquakes, and hurricanes. The APM-40 system also has many applications in other fields: field hospitals, fire brigades, refugee camps, large construction sites, tunnels, underground garages, mines, caves, scouts, sports, and other major events; wherever wireless communication is not possible, not economical or not enough reliable (jamming, saturations).

APM-40 telephone terminal

Example of APM-40 network in line topology

Example of two APM-40 networks connected together via pair of gateway units APM-40/I. Network A is in line topology, network B is in ring topology. Users in network B can call also to network A, radio network and PSTN network. Users in network A can call also to network B.

A reel of field wire

CT-01 IDC connection box (open, with field wire inserted)

CT-01 IDC connection box (closed, with field wire inserted)

APM-40 terminals and CT-01 units are available in different colors for different applications

CT-01 IDC connection box (open, with field wire inserted) APM-40 telephone terminal with spring connectors

APM-40/I gateway unit with radio station connected

47

APM-40 telephone terminal – with the lid closed

MIL Sistemika d.o.o. Zemljemerska 10 SI-1000 Ljubljana T: +386 1 4382 445 E: [email protected]

www.milsistemika.com

About MIL Sistemika

MIL C4I System is divided into several product areas, each tasked with a special role in relation to the level of the command and control system for which it is designed. By functionality, products are divided into five areas:

MIL Sistemika is a software development and consulting company, with a mission to produce commercial off the shelf products in the area of military command & control, communications and training & simulation products. The goal is to act as product vendor for own products. Unique Selling points are: agility, quality and product leadership.

1. Planning (C4) 2. Execution (C2/C1) 3. Communications & interoperability 4. Sensors & weapons integration

Vision: Provide soldiers with software aids. Make C2/C4I systems a true force multiplier, no soldier will want to fight without.

5. Training and simulations As user requirements are widely different on C4 and C2/C1 layers, software functionality is organized in the same way: C4 level product have emphasized planning related functionalities, while C2 level products, focuses on execution, weapon sensor integration, and reporting. The main goal of the whole MIL C4I Battle system is to provide support for uninterrupted digital chain of command and control, from the individual soldier, up to top level command.

Mission: Produce and sell requirements driven COTS, C2 and C4I (Command & Control) military software at affordable price.

Command and control refers to the ability of military commanders to direct forces. The addition of communications to the grouping reflects the fact that communications is required to enable this coordination. MIL Sistemika Battle C4I Battle System focus on Command & Control process, covering all levels from the individual soldier to the top (planning) levels of military command structure. MIL Sistemika products cover Sensor & Weapons integration, GIS navigation and mapping systems, tactical communications software, interoperability protocols and integrated training tools. MIL C4I software is designed on true mission requirements, and feedback from the soldiers. MIL software can act as a true force multiplier when used in correct manner.

JOC SA JOC level software provides joint staff and task force commanders with up-to-date detailed picture of operations. It aggregates information from military and civilian data feeds, including plans from underlying C2IS system, to generate a common operational picture for land, maritime, air and joint operations.

48

IHTA – Intelligent Headquarters Tactical Assistant

Built on the same fundamentals as its mobile counterpart, TOC HQ offers a robust and modular architecture built around a high performance GIS Engine. The C2IS delivers all tactical data to the screens and overheads of the command staff in a modern tactical operations centre. It offers a wide range of connectivity to various data networks, improves the military planning and command & control process and enhances situational awareness. It helps gathering and sharing information and presents it in a most clear and understandable fashion. It features a high productivity, industry standard windows interface, which most users will find familiar.

several navigation, weapon and sensor systems. “BMS” features a battle-proven intuitive touch screen user interface designed to be used in vehicles moving over rough terrain. PES – Personal Eye System Soldiers on the battlefield today need information that is derived from data, distributed through fast digital networks and gathered by advanced sensors. The new soldier’s equipment kit allows each unit to share real-time information with other units, coordinate movement and react to battlefield conditions quickly and accurately. Network-centric warfare is a relatively new concept that unifies all the advantages gained by other elements of the newly developed digital components. Dismounted Soldier System is a personal tracking, navigation and data sharing application aimed at soldiers, police, security forces, emergency services and others that need topographic navigation, tracking, blue force tracking, and common operational picture sharing. Designed to run on a popular Android platform, can be used as a PDA (Personal Data Assistant) or fully integrated in a future soldier’s kit.

BES – Battle Eye System With its robust and modular architecture built around a high performance GIS Engine, the “BMS” delivers all tactical data to the screen of the fighting soldier. It offers a wide range of connectivity to various data networks, improves the command & control process and enhances situational awareness. It helps gathering and sharing information and integrates

49

Training and Simulations All MIL Sistemika software is fully integrated with the VBS3 simulation engine – a fully interactive three-dimensional simulation system focused on tactics training and operational procedures down to the troop level. It is suitable for a wide range of training scenarios in a chosen simulated environment. Units use it to speed up reaction times and improve the organization of activities. CS – Sensors & Weapons integration server It is an advanced software that can integrate various military vehicle information and communication systems. The integration server can communicate with multiple sensors or weapons, using various protocols throughout the vehicle internal network or through direct serial connections. It serves relevant data to other systems inside the vehicle. It can expose combat net radio specific integrated Blue Force Tracking functionality to other applications. COMMS2 – CNR abstraction layer Implementation MIL Sistemika can provide a complete integration solution design, implementation, training and support to the end users. MIL Sistemika has in depth knowledge, and years of experience in mission critical software development, quality assurance and 1st and 2nd line customer support. It employs ex-military, top class software engineers, project managers and hardware integrations experts. This puts MIL Sistemika in a unique position to offer consulting services to other manufacturing companies worldwide. MIL Sistemika has expertise to offer consulting services in the following areas:  Integration and optimization of HF/VHF communication equipment. (connecting different types of radio equipment, currently in use into a transparent C4I combat data network).

Provides connectivity among different military communication equipment and networks. It acts as a software driver for different Combat Network Radios (CNR), offering reliable or unreliable or routed communication protocol implementations. COMMS2 supports multitude of radio equipment from state of the art software defined radios to older analog radios. COMMS2 can integrate disjoint radio networks and act as a radio abstraction layer.

 Integration of vehicle sensors and weapons  Provide C2 level Battlefield Management System (Battle Eye System)  Provide nationwide C4I system and NATO (NFFI or MIP) connectivity

BRIDGE – Interoperability suite

 Perform custom development requested by a customer

Core element of Battle Eye System interoperability suite, is a connectivity gateway called “BRIDGE”. Interconnecting different C4I systems into one seamless coalition command & control system. Modular architecture shares the same design principles with other MIL products thus ensuring maximum expandability and connectivity. All filtering and data transformation is configuration based minimizing the need for frequent software upgrades.

 Provide consulting services  Provide training, support and maintenance

50

Domain knowledge

References

 Command & Control systems

Communications software for Estonian Land Forces

 Fire support systems, mortar, artillery and air

(Joining disjoint networks)

 CBRN (chemical, biological, radiological, nuclear) systems

Battle Eye System and COMMS2 to Mexican Policia Federal

 Military communications and wireless data networks

Full Milsistemika C4I system for Philippine Marines

 Military computers and IT support

CBRN Battle Eye System and senor integration for Qatar,

 Usability of military software in mobile environments

Oman, Saudi Arabia

 Dismounted / Future soldier systems

CBRN pollution mapping system and senor integration

 Sensor networks

for Poland

 Interoperability

CBRN Sensor integration with BMS on Otokar Cobra

 Training and simulations

Vehicles for Slovenian Armed Forces Personal Eye System OEM delivery for ChemringTS BMS upgrade on Steyr Pandur (Valuk) vehicles for Slovenian Armed Forces Sensor and weapons integration on AMV 8x8 vehicles for Patria Harris Falcon II Blue Force tracking integration with Battlefield management system in Transport & Logistics units for Slovenian Armed Forces Sniper ballistic calculator kits for Slovenian Armed Forces Worked with Konsberg on full Protector 151 integration for Patria Kongsberg protector 151 gunner training system for Patria Providing BMS and NFFI connectivity to Slovenia, Serbia, Macedonia, Estonia, Litva, Latvia on NATO Combined Endeavor exercises 2012 - 2014

51

PIPISTREL d.o.o. Ajdovščina Goriška cesta 50a SI-5270 Ajdovščina T: +386 5 3663 873 E: [email protected]

www.pipistrel.si

Pipistrel d.o.o. Ajdovščina – Designer and producer of advanced light aircraft and special mission aircraft

glider, with excellent gliding ratio and available with either a petrol or electric motor – in 2007, it was the first two-seat fully electric aircraft in the world. Pipistrel’s 4-seat cruiser Panthera is at the moment the only aircraft available in the market with three versions of propulsion: petrol, hybrid or fully electric. Altogether, Pipistrel produces 12 types of aircraft.

Pipistrel was established in 1989 as the first private aircraft producer in the former Yugoslavia. Pipistrel’s primary activity is design and production of different types of aircraft – single seat, double seat and 4-seat; motorplanes, gliders and electric-powered aircraft. Pipistrel is EASA Design Organization Approval and Production Approval certificate holder. The distributor network in 35 countries on all continents offers worldwide customer support and service. The aircraft currently fly in 90 countries. More than 1500 aircraft have been produced. The production capacity of factories in Slovenia and Italy is one aircraft per day. Pipistrel is the market leader of efficient aircraft design, and innovative electric and hybrid aircraft propulsions. The company won the “European Business Award” for Innovation in November 2010, being chosen as the most innovative company in the European Union among 15,000 competitors. Adventurist pilots flew around the world, landed in the Antarctic and flew over the top of Mt. Everest in Pipistrel aircraft. In 2008, the “Popular Science” magazine named Pipistrel’s aircraft Taurus Electro one of the ten best innovations of the year and NASA awarded Pipistrel the “Best Aircraft in the World” title three times.

Uber signed a partnership with Pipistrel for large-scale deployment of electric Vertical Take-Off and Landing vehicles (VTOLs) in order to fulfil its mission of providing a safe and reliable transportation service to everyone, everywhere. The goal of this partnership is to enable users of a future Uber Elevate Network to provide transportation and delivery services with an electric Pipistrel VTOL. Pipistrel will develop aircraft to satisfy short distance urban operations as the basis for the VTOL performance specifications.

Because of many important achievements, awards and competition victories, the President of the Republic of Slovenia, Dr. Danilo Türk, decorated the Pipistrel team in 2011 with the highest civil award in the country: the Golden Order for services to the Republic of Slovenia. Products: Sinus was the first 2-seat motor-glider in the UL class and the first serially built entirely of composite materials. With shorter wings and a stronger engine, the Virus SW model is the fastest ultralight aircraft in the market, exceeding 300 km/h. The Taurus was the world’s first side-by-side 2-seat self-launching

52

Pipistrel SURVEYOR Airborne Surveillance program features a special aircraft that is customized with different advanced sensory packages and control systems using the Pipistrel Virus SW 100 as the base airframe with either a 35-foot or 50-foot wingspan, and then fully customized for specific mission requirements. It has an extremely fast cruising speed, excellent camera stability and low noise, as well as superb flying characteristics even in the harshest conditions, such as arctic ice, deserts and tropical regions.

Pipistrel GARUD Pipistrel aircraft are the best field-proven small aircraft for basic pilot training. More than 600 aircraft are used in the harshest conditions all over the world. The Garud Trainer was selected by the Indian Air Force, Indian Navy and Indian National Cadets Corps as their basic pilot trainer. 200 aircraft are in the process of being delivered in 2016 and 2017.

Because Pipistrel aircraft burn Mogas instead of Avgas, they are very quiet, economic and with extreme characteristics. They can reach an altitude of 30,000 feet, have a range of 5,000 km, and can remain in the air for over 40 hours. They have STOL characteristics and low-cost operation, so they are ideal for modifications into special mission platforms for any kind of aerial work and surveillance.

The best aircraft for special services such as: infrared and classic aerial video and photography, day-and-night video recording, 3D terrain mapping, surveillance, sea and border patrol, power/pipeline monitoring, traffic observation, fire/ disaster management, and all sorts of airborne data acquisition.

Different Government customers use Pipistrel platforms as a lowcost high-performance substitute to bigger and costly optionally-piloted or unmanned aircraft. They can be equipped with any type of surveillance sensors and

The Garud is made of sophisticated carbon-fibre composite materials with the best technologies, but durable and simple to use for beginner pilots. It is capable of take-off and landing on prepared, as well as semi-prepared surfaces, carrying 2 crew members and their equipment. Like all Pipistrel training aircraft, it is equipped with a full airframe ballistic parachute rescue system, but also features a dual screen glass cockpit, night VFR equipment, airbrakes for rapid descent and a full-featured autopilot. It has a certified engine running on automotive fuel, which grants the highest speed and the longest range in the category. An aircraft so superb is, of course, approved for intentional spins.

devices. Mounting on a gyro-stabilized gimbal assures perfect quality of recordings.

53

Prevent&Deloza d.o.o. Kosova ulica 14 SI-3000 Celje T: +386 3 4280 850 E: [email protected]

www.prevent-deloza.si

MISSION POSSIBLE- COOLING DOWN THE SOLDIER IN BODY ARMOUR By Prevent & Deloza | Updated 15 May 2017 INTRODUCTION Founded in 1954, the company has a long tradition in textiles. The core business was the production of accessories – safety strings, ribbons, lace, elastics; this was later followed by a range of protective clothing. The company has gathered a lot of knowledge and experience. In conjunction with key suppliers and scientific institutes on the one hand, and with the expectations of the users on the other, this is reflected in their products and offer. VISION The company has the knowledge and the latest technology for the development of ranges of protective clothes. Company vision is to become the leading producer of special solutions for cooling systems in Europe. It is a customer-oriented team of creative, motivated and responsible employees. With our knowledge and work, it create high-quality products and offer a professional and comprehensive service to the customers; the intention is to increase the share of innovative products with built-in knowledge and intelligent materials that bring even higher added value.

still the subject of numerous researches. Progress continues towards passive and active cooling systems, optimizing the user-friendly and functional use in order to abolish the deficiencies, such as the reactivation of the cooling effect, unfriendly handling, difficult maintenance and use with other layers of the clothing system. PASSIVE SYSTEMS FOR COOLING – BY PREVENT & DELOZA The passive systems for cooling down people, developed in cooperation with the army and the police at Prevent & Deloza especially for wearing under ballistic protection, are more suitable for use in the field. This type of solution is helpful for local cooling of the human body. Today, the most common systems for cooling on the market, are cooling systems that function by use of ice, salt and crystals. The Prevent & Deloza system is composed of knitwear, that efficiently extracts heat and moisture from underneath the ballistic protection. Additional functional material provides the quickest evaporation of excess moisture and ensures an adequate extraction and storage of excessive heat. Already, the system manufactured in this way, substantially reduces the heat load on a person. By adding the evaporative part of the system, we ensure cooling of the person wearing ballistic protection, namely by an additional 3°C already after thirty minutes of activity. Prevent&Deloza solution before/after 30 min of activity

A SOLDIER IN A HOT ENVIRONMENT Soldiers can work in extreme conditions, where different negative influences from the surrounding area act on them. Besides high temperatures above 30°C, there is also the possibility of fire, water, dust, mechanical loads, etc. One of the greatest problems occurs during thermal overload as the consequence of exposure to the weight of the equipment and the hours of activity. This means that when performing work in a warm environment, the temperature range of the human core (between 36°C and 38°C) as well as the temperature on the skin surface (between 20°C and 35°C) can change very quickly. Slight deviations from the normal condition are acceptable for short periods of time, however, long-term exposure to heat can have a negative impact. Dangerous situations, injuries and perhaps even death are possible; the reasons for which have often been studied. Mostly, the soldiers’ uniforms do not ensure the optimal thermal balance which could prevent overheating. This area is

Well established competitor from Europe

Picture 1 and 2: FLIR picture of temperature before and after 30 min of activity in ballistic shirt (both TR SK1 ballistic standard)

54

From a functional perspective, in extremely hot environmental conditions, the simplest and the most efficient products are recommended, regarding handling, maintenance, mobility and reactivation of cooling. An example of such products are systems of material combinations, integrated into cooling shirts, under-helmet hoods, trouser legs and elbow pads. The cooling effect lasts for more than 12 hours of active use, then the removable pads are simply soaked in water, and the effect of cooling is reactivated. This means that only water is required to use the product. Such products not only help to maintain normal body temperature, but also protect provides higher physical performances. DEVELOPED SOLUTIONS Usage of passive systems for cooling is recommended for the entire military personnel in different parts of the world, where soldiers are exposed to heat loads. Company produce combat shirts, shirts with ballistic protection, ballistic vests, helmet inlays, etc.

Picture 3,4,5: Samples of cooling solutions

It is of course very important that the user is introduced to these products as well as the application methods and maintenance before using them in an extreme working environment. Knowing the functional operation of the systems in such equipment enables the users to help themselves and thereby prevent heat overload. It is important to emphasize that the systems offered by Prevent & Deloza, do not require any energy or special maintenance protocol. The training for use takes less than 2 minutes.

55

SeanTech d.o.o. Mekinčeva ulica 15 SI-1000 Ljubljana T: +386 5 3311 700 F: +386 5 3311 709 E: [email protected]

www.seantech.eu

0X PRESS

Type HPV Hydraulic Vertical Presses for energetic materials pressing and extruding with one or two hydraulic cylinders

MIXERS

for mixing and homogenizing of pastes, liquid or powder media:

Type MP-1000 Mixing Drum (mixing or polishing energetic materials’ surface with graphite or other agents)

Type VMP-600 Vertical Planetary Mixer (mixing nitrocellulose and alcohol with nitro-glycerine and chemical additives)

CUTTING MACHINES “Guillotine” type Cutting Machine - cutting of extruded energetic material into bundles or strips

Type P-4 Cutting Machine is a single channel table cutting machine designed for cutting energetic material into strips and blocks

Cutting machine type CM - cutting of semi-dry stiks and tube shape

56

SeanTech, process engineering, Ltd., is a privately-owned Slovenian engineering company present on the global market with tailor-made solutions for process equipment for a variety of industries. In 2017, SeanTech celebrates 70 years of tradition and references in process equipment production under the brand name “Gostol” as a legal successor of the Gostol-Gopan company and as its former division. SeanTech offers a segment of highly developed dual-use equipment for energetic material production in the civil and defence industries. SeanTech services consist of developing heavy duty process equipment, its production, the assembly of machines procured by the buyer or supervising the assembly and final commissioning at the customer's site, training of personnel and aftersales activities.

SeanTech equipment key benefits: 1. Custom design according to the technological requirements of the customer’s product or process 2. Compliance with EU standards and Directive 2014/34/EU (ATEX) 3. State-of-the art technical solutions, elements of well-known European suppliers 4. PC/PLC control and (video) monitoring of the technological process 5. Very high parameters of accuracy regulation 6. Long-term performance 7. Robust construction, precise machining and a reliable execution 8. Own software development 9. Ideal combination of superior quality, price and acceptable delivery time

MH-5000 Homogenizer (mixing or homogenizing of energetic material granules and other agents)

KNEADING MACHINES designed for kneading, mixing and homogenizing pastes

ROLLING MILLS

are designed for dewatering, gelatinization of energetic material and final shaping (thickness) of energetic material sheets:

Differential Rolling Mill

Final Gelatinization Rolling Mill

For more technical information please contact SeanTech at [email protected].

57

Fine Rolling Mill

SkyLabs d.o.o. Poljska ulica 6 SI-2000 Maribor T: +386 4 0190 986 E: [email protected]

www.skylabs.si

SkyLabs Mission

SkyLabs is an aerospace-technology oriented company providing miniaturized on-board data handling solutions and innovative approach to aerospace engineering. Our vision is to innovate the aerospace market especially in the segment of small satellites. SkyLabs is incorporating a new concepts and technologies, reducing system complexity and providing fault tolerant design in cost effective solutions.

DIFFERENT Leveraging new concepts and innovative technologies to drive the emerging aerospace market. RESILIENT Providing a sophisticated fault tolerant design to facilitate profit-driven nanoscale aerospace applications.

Competences • • • •

Embedded electronics and software development Analog electronics, radio systems, and signal processing IP Cores (digital and mixed signals) Miniaturization key aspect (following latest technology trends) • Hardware accelerated approach • Awareness of harsh space environment effect

EFFICIENT Reducing overall system complexity by combining next level of integration with higher performance levels and decreased costs of production.

SkyLabs Vision

On-board data handling functionality exploits the advantages of the reliable hot redundant CAN networking with built-in error detection mechanisms and a ruggedized and fail-safe harness to reduce the overall system complexity.

We are innovating the aerospace market with SkyLabs disruptive technologies, products and solutions to change the layout of space.

NANOimager is a miniaturized multispectral SWIR camera based on an enhanced InGaAs sensor sensitive in the shortwave infrared region.

SkyLabs product portfolio

Target applications: • Enhanced situational awareness with lowest light imaging capability • Imaging through extreme conditions including haze, smoke and dust

Nano satellite platform & aerospace subsystems

NANOsky I is a highly miniaturized nanoscale platform with fault tolerant features as would be expected in high end systems. SEE immunity, innovative error mitigation techniques, sophisticated three-level FDIR policy, redundancy on all critical functions and thoughtful component selection ensure robustness, high reliability and availability of the platform.

58

PicoSkyFT™ Fault tolerant processor soft core PicoSkyFT is high-performance radiation hardened by design 8/16 bit soft-core processor designed for embedded processing functions within System on Chips by providing another layer of abstraction to tackle the complexity and to adequately respond to the rapidly changing needs and securing development and verification efforts. Radiation hardened by design, small size, low power and configurable architectural features optimized for hard, real-time processing make this type of core suitable for single or multi-thread specialized applications.

cPCI SDR development board PicoSky™ cpciSDR 1x1 is a state-of-the-art rugged platform for rapid development of SDR applications and being the first in industrial CompactPCI® 3U form-factor.

Target applications: • Replacement for complex FPGA finite state machines with simpler piece of software • PicoSkyFT SoC fitted for distributed intelligence • Smart sensors/actuators, RTU, payload TM/TC interfaces It can be reconfigured or re-programmed by the PicoSkyFT processor in order to enable operation with different waveforms and protocols through dynamic loading. On top of the comprehensive SDR development platform, the board offers a wide range of interface like SpaceWire and CAN in redundant configuration, SPI, I2C, mezzanine expansion GPIO headers, enhanced local telemetry acquisition, external 1PPS and reference clock, etc.

PicoSky evaluation board

Rich set of development boards available with versatile interfaces.

The PicoSky™ Evaluation Board it has been designed to provide PicoSkyFT users quick and intuitive hands-on experience thanks to the already preprogramed FPGA with PicoSkyFT-Basic SoC configuration, USB Plug and Play function, and the on-board integrated PicoSkyLINK programmer.

59

Trival antene d.o.o. Gorenjska cesta 25 SI-1234 Mengeš T: +386 1 8314 396 F: +386 1 8313 377 E: [email protected]

www.trival-antennas-masts.com

TRIVAL ANTENE d.o.o. main activities are:

Antennas The TRIVAL ANTENE company develops and produces military antennas in HF, VHF and UHF frequency range for tactical transportable, mobile or stationary use. The antennas are whip-type monopoles, omni-directional or directional antennas (yagi or log-periodic type).

• development and production of antennas, masts and accessories for wireless telecommunications; • development, engineering, project-making and consulting in the field of wireless telecommunications TRIVAL antennas made of composite materials (polyester and epoxy resins reinforced with fibreglass) were first produced back in 1965, on the premises of the SVIT Kamnik company. Today Trival Antene d.o.o. has on its list more than 200 different types of antennas, antenna masts and accessories. Apart from military items, the company supplies products for civil professional use (marine applications, industry and organisations, ministries, radioamateurs, mobile comm’s, etc.)

They are usually made of composites (epoxy or polyester, glass-fibre reinforcement), with stainless steel metal joints. All antennas for military use comply with MIL-STD-810F. Antenna masts TRIVAL antenna masts may be divided into two types: tubular sectionalised and telescopic winch driven masts. All masts are made of composite materials, up to 18 metres high. All mast types are intended for tactical use with included - guying accessories kit. Telescopic masts are also suitable for mobile use (including mounting kit accessories).

TRIVAL Co. products are subdivided as follows: • military antennas (HF, VHF and UHF antennas, stationary, tactical and mobile antennas), • antennas for marine applications (MF, HF and UHF antennas for vessels and yachts), • antennas for civil-professional communications (HF, VHF and UHF antennas, stationary, mobile antennas and antennas for hand-held radios, omnidirectional di pole and co-linear antennas, directional yagi and log-period ic antennas), • antenna masts (tubular sectionalised and winch driven telescopic glass-fibre masts from 5 to 18 m) • antenna accessories (cables, connectors, etc.), • custom designed antennas (antennas for EMC measurements, etc.)

60

Pomurski sejem, d.d. Cesta na stadion 2 SI-9250 Gornja Radgona T: +386 2 5642 116 E: [email protected]

www.pomurski-sejem.si

ALLIANCE OF TRUST! International Fair of Defence, Security, Protection and Rescue SOBRA on the crossroads of four countries Gornja Radgona, Slovenia SOBRA Fair presents equipment suppliers whose activities are needed by the military and civil defence, fire services, police and other institutions for the protection and rescue of people and property. Also those activities and missions of institutions and individuals that care for security and protection are presented. Business and professional exhibitions and conferences, dynamic presentations, and the best advice are joined into a true festival of security. These are also the reasons why in addition to the targeted business and professional public the SOBRA Fair is also visited by masses of visitors from all walks of life. At the fair these people equip themselves with the knowledge and products that can protect them from the threats of military aggression, crime, fires, accidents and incidents in households, harmful emissions and discharges of hazardous substances as well as from natural disasters. In the light of modern threats of war, refugee issues and natural disasters SOBRA Fair is a demonstration of international expertise and business cooperation in the field of defence, security, protection and rescue.

GLOBAL AND PRECISE A crowd of 14 thousand visitors and the presence of the most important decision-makers in the year 2016 Participating in the Fair: Ministry of Defence, Ministry of the Interior, Administration of the Republic of Slovenia for Civil Protection and Rescue , Fire fighting Association of Slovenia, Slovene Forces ... I.D. CARD 2016 • • • • • • •

Exhibition space total: 35.000 m2 Exhibition halls: 5.000 m2 Outdoor exhibition space: 10.000 m2 Presentation ground: 20.000 m2 Number of exhibitors: 100 Number of participating countries: 10 Number of visitors: 14.000

Join us at the SOBRA Fair and present your contribution to greater safety, security, defence and rescue!

STRATEGIC AND INNOVATIVE Safety, prevention and solidarity cooperation AFFIRMATIVE High profile meeting for the business and general public ATTRACTIVE Exhibitions, forum and dynamic presentations

61

UF PRO®, UNI&FORMA d.o.o. Planjava 6 SI-1236 Trzin  T: +386 1 5644 688 E: [email protected]

www.ufpro.si

About UF PRO® OUR MISSION. At UF PRO® we design and manufacture high-end tactical garment systems for law enforcement and military personnel allowing them to accomplish their mission under the harshest physical and environmental conditions.

tures, but before a piece of gear gets the UF PRO® tag, it has to fulfil the strict requirements of professional tactical end-users regarding functionality, ergonomics, design and durability. WORLD CLASS MATERIALS COMBINED WITH INNOVATIVE TECHNOLOGIES. Only top-class materials make top-class products. This is why we only use high-end materials from renowned brands and combine them with innovative clothing technologies that we largely develop in-house.

WHAT IS OUR BACKGROUND? Before we started the UF PRO® brand, we were known only under our company name UNI&FORMA. UNI&FORMA was founded 1997 in Slovenia with the vision to make high performance garment systems for large organisations. We soon started to supply the biggest government organizations in Slovenia, such as the Slovenian Military, Police, Customs and many others. With almost two decades of experience of manufacturing outdoor clothing systems for professional end-users, we started to work with smaller LE and military units, who approached us with even higher demands for qualitative and functional tactical outdoor apparel. Out of these projects the idea of the UF PRO® brand was born. With new product concepts, innovative technologies and never before seen features, we soon became one of the most innovative brands in the high-end tactical clothing industry. Today we are extremely proud and honoured that highly specialised military and LE units, whose lives depend on their gear, choose UF PRO®.

MADE IN EUROPE. For us, “Made in Europe” is an integral component of our quality policy. From the materials used to the manufacturing process, we consciously rely on European standards and production facilities in order to guarantee reliable product quality. SUSTAINABILITY. We take our obligation to our environment and the global community seriously. Our raw materials and processes are constantly monitored and optimised to leave the smallest possible ecological footprint. We manufacture our own products in Europe and do not allow child labour at any of our manufacturing partners’ locations.

HIGH- QUALITY OUTDOOR GARMENTS DESIGNED FOR TACTICAL USERS. Our gear is built to perform under the toughest environmental conditions, from a monsoon downpour to sub-zero tempera-

62

Valhalla Turrets d.o.o. Šišenska cesta 67 SI-1000 Ljubljana M: +386 41 334 208 E: [email protected]

www.valhalla-turrets.com

A S G A R D SCALABLE TURRET. ENDLESS POSSIBILITIES.

VALHALLA TURRETS. DEFENCE ENGINEERING COMPANY. CONCEPTUAL DESIGN ENGINEERING ANALYSIS PROTOTYPING TECHNOLOGY TRANSFER MANUFACTURING PARTNERSHIP WITH DATCON D.O.O. AND ARMAS D.O.O. PROUD MEMBER OF SLOVENIAN DEFENCE INDUSTRY CLUSTER (GOIS) VALHALLA TURRETS D.O.O. ŠIŠENSKA CESTA 67 . SI-1000 LJUBLJANA M +386 41 334 208 E [email protected] W WWW.VALHALLA-TURRETS.COM

63

1 2 7

The Chamber of Commerce and Industry of Slovenia - CCIS •

With over 150 years of tradition, voluntary membership, and by far the largest number of members, the CCIS is the most influential business association in Slovenia

• Offering the collective wisdom and rich experience of more than 100 experts and specialists •

Uniting commerce, industry, tourism and service sectors in Slovenia



• As a member of Eurochambres and the ICC, as well as other international associations and organisations, the CCIS is part of an extensive international network with innumerable contacts •

References and experience in the realisation of EuropeAid programmes such as Asia Invest, AL Invest, Gateway to Japan, Executive Training Programme for Japan and Korea, INTERREG and national development programmes.

At Your Service Chamber of Commerce and Industry of Slovenia – CCIS Dimičeva 13, SI-1504 Ljubljana, Slovenia T: +386 1 5898 000, F: +386 1 5898 100 E: [email protected] W: www.gzs.si/eng Our staff are at your service and will provide you with all the information you need! 64

SLOVENIAN DEFENCE INDUSTRY CLUSTER Grozd obrambne industrije Slovenije (GOIS) The Slovenian Defence Industry Cluster is a business association based on the economic interest of its members. It was established in 2008 and brings together Slovenian suppliers of defence, security and protection products and services. In close cooperation to MoD of Slovenia the Cluster assists its members for the creation of conditions for the research, development, production, testing, maintenance, trade and marketing of their products and services in the areas of defence, security and protection. We offer services such as the following: •

Promoting Slovenian defence & security industries in Slovenia and abroad.

• Promoting and creating opportunities for the international cooperation of Slovenian companies. •

Assisting via cooperation with international defence & security industries and their associations.

•

Assisting foreign companies when seeking to establish contacts with Slovenian companies.

GOIS Slovenian Defence Industry Cluster Dimičeva 13, SI-1504 Ljubljana, Slovenia T: +386 1 5898 423 F: +386 1 5898 100 E: [email protected] W: giz-gois.si

pingvin 1m 2m v1.indd 1

65

28. 08. 15 14:15

Photo: Bruno Toič

66

Slovenian Armed Forces www.slovenskavojska.si

Photo: Bruno Toič

67