INTRODUCTION LETTER
Dear Customers: We are pleased to introduce DIAMANTINA CHRISTENSEN trading company. Diamantina Christensen is a newly formed company that represents the union of Christensen Chile S.A. and Boyles Bros. Diamantina S.A., leaders in the supply of geological exploration products. Each of these companies is well known and respected for their experience and commitment to quality and service. Diamantina Christensen was founded in order to offer you the convenience of a one-stop shopping store in combination with our considerable manufacturing and logistic capabilities. Our goal is to serve our customers' needs with a complete line of diamond drilling tools and accessories. Both the Chile and Peru plants are ISO 9001:2000 certified, thus assuring you the utmost in quality and consistency. Along with this introduction letter, please find an overview of our manufacturing facilities and the latest Diamantina Christensen product catalog. This product catalog will serve to demonstrate to you just how fully equipped we are to fulfill all of your drilling supply needs. Best Regards,
Humberto Arce General Manager
Fernando Buttazzoni Vice President
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
INTRODUCTION LETTER
I MIN NG
P
S RO DUCT
Christensen Chile S.A. Founded in 1964, Christensen Chile was formed under the principle of providing quality products and service at a fair price, thusly maximizing value. Today, our modern industrial facilities and broad commercial platform gather the most prestigious representations in the mining industry's percussion, core and water well drilling markets worldwide. Located in an industrial complex in Santiago, Christensen Chile's facilities cover a surface area of nearly 250,000 square feet. The industrial plant (of approximately 60,000 square feet) uses state-of-the-art technology and equipment to manufacture drill bits, rods, and spare parts to meet the requirements of today's demanding market.
Constant research and field work experience in diamond core and percussion drilling have permitted Christensen Chile to constantly improve its vast array of tools. Also, the experience gained through Christensen Chile's participation in these processes has made it possible to develop the most modern techniques for products required in the drilling and exploration industries worldwide.
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
INTRODUCTION LETTER
Boyles Bros Diamantina S.A. Boyles Bros. Diamantina S.A. has long been a pioneer in the manufacturer of diamond products in Peru. Our fifty years of experience have allowed us to accumulate a great amount of knowledge about how to design diamond bits and tools that best suit given ground conditions.
Located on the outskirts of Lima Peru, in a 50,000 square foot facility, our manufacturing process is carried out using the latest in high tech equipment and procedures. Additionally, our highly qualified personnel frequently visit customer drilling sites to evaluate usage and performance of our products. This service not only helps our customers to better use our products, but also helps us to improve our products in order to better serve our customers needs. This combination of quality product, and quality service, lead to more successful drilling results for our customers. Product quality is a priority for us, and our manufacturing technique is based on integrating work from all areas of our company as well as maintaining ongoing research and development. High quality products are further assured by the use of the finest in raw materials, and the latest advances in manufacturing equipment.
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
DIAMANTINA CHRISTENSEN CONTACT INFORMATION
HUMBERTO ARCE General Manager Office: 511 326-0494 Ext. 104
[email protected] EDUARDO RAMIREZ Sales Manager Office: 56 2 6207831
[email protected] GUILLERMO WESTON Production Manager Office: 511 326-0494 Ext. 106
[email protected] MARILU JUSCAMAITA Foreign Trade Representative Office: 511 326-0494 Ext. 104
[email protected] Telf.: 562-6207800 (Chile) • 511-6186777 (Perú) Web site: www.diamantinachristensen.com e-mail:
[email protected]
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
TABLE OF CONTENTS DIAMOND PRODUCTS SECTION
SECTION A Surface-Set Diamond Bits
A-2
Impregnated Bits
A-3
Impregnated Bits Non-Standard Options
A-5
Casing Shoes
A-6
Reaming Shells
A-7
Available Sizes
A-8
Operational Parameters
A-9
Wear Patterns
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
A-10
A-1
SURFACE-SET DIAMOND BITS
GENERAL DESCRIPTION
HOW TO ORDER A SURFACE-SET DIAMOND BIT?
Diamantina Christensen introduces the latest generation of surface-set diamond core bits utilized for the geological exploration industry
Ordering code: 1. Bit size (Chart 1, page A-8) 2. Diamond size (Picture 1) 3. Crown profile (Picture 2) 4. Discharge configuration (Picture 3) Example: H 25 spc Stepped profile Face discharge for pilot core lifter case • Surface-set diamond bit size H • 25 spc diamond size • Stepped crown profile • Face discharge for pilot core lifter case All kind of surface-set diamond bits are available. In addition, all the orders are warmly accepted according to specific customer's requirements
Bit Selection ROCK HARDNESS VERY SOFT
SOFT
SOFT / MEDIUM
MEDIUM
MEDIUM / HARD
ROCK FEATURES Very abrasive
Medium Abrasiveness
Coarse Grain Very Fractured
Medium Grain Fractured to competent
Fractured
10-15 spc 15-25 spc 25-40 spc 40-60 spc
•
• • •
Surface-set diamond bits are manufactured by the highest quality standards to give long service life and maximum penetration Diamonds are set in a pre-determined pattern on the working surfaces of the bit Appropiate for soft to medium formations due to the greater exposure of the individual diamond crystals. Outstanding performance in unconsolidated formations such as sandstone, gypsum, clay or talc.
Picture 1: Available diamond sizes
HOW TO SELECT A SURFACE-SET DIAMOND BIT? • •
For soft and clayey formations is recomended face discharge The higher rock hardness, the smaller diamond embbeded on the bit. The diamond stone size (Stones per carat [spc] ) available are -
•
10/15 15/25 25/40 40/60
spc: Very soft to soft formations spc: Soft to soft medium formations spc: Soft medium to medium formations spc: Medium to medium hard formations
A. STEPPED PROFILE
B. PILOT PROFILE
C. SEMI-ROUND PROFILE
Picture 2: Available crown profiles
STANDARD CORE LIFTER CASE
PILOT CORE LIFTER CASE
The profiles available are: Stepped profile crown (picture 2A): Good penetration and stability, not recommended in fractured formations. Pilot profile crown (picture 2B): Provides good stability to minimize hole deviation. Semi-round profile crown (picture 2C): Good strength in broken ground, requires high bit loads.
NOTE If the rock hardness is higher than 6 Mohs is preferable to use an impregnated bit
A. REGULAR DISCHARGE
B. FACE DISCHARGE
C. FACE DISCHARGE
Picture 3: Available discharges configuration
A-2
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
IMPREGNATED BITS
GENERAL DESCRIPTION Diamantina Christensen introduces the latest generation of impregnated diamond core bits utilized for the geological exploration industry
STEEL BODY POWDER METAL BONO
INDUSTRIAL DIAMONDS
GRIT DIAMONDS
INSERT
• • • • • •
•
Matrix composed of a powdered metal bond and synthetic diamond embedded in a uniform distribution. Simple crown geometry that makes them less susceptible to in-hole damages than other types of cutting media. High perform in medium to hard formations. Better tolerance to changing formations. The abrasiveness and hardness of the formation is a critical variable for the bit selection. Low series bits would be used to drill a soft, abrasive, unconsolidated formation such as Sandstone, Gypsum, Calcite or Talc. High series bits would be used to drill a hard, non-abrasive, consolidated formation such as Jasperite, Taconite, Quartz or Chert.
HOW TO SELECT AN IMPREGNATED BIT? Keep in mind the following: 1. 2.
3.
Rock characteristics (Picture 4, page A-4) Drill power (Series description, page A-4) • Low power Higher series • High power Lower series Penetration rate and bit life: • Slow penetration Higher series • Short bit life Lower series
HOW TO ORDER AN IMPREGNATED BIT? Ordering code: 4. Bit size (Chart 1, page A-8) 5. Bit Series (Picture 4, next page) Example: H • • •
4A Impregnated bit size H Series 4A Regular discharge
NOTE If non-standard impregnated bits are required, please go to Options (page A-5)
All kind of impregnated bits are available. In addition, all the orders are warmly accepted according to specific customers requirements
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
A-3
IMPREGNATED BITS
SERIES SELECTION TABLE
SOFT
ABRASIVE
FRACTURED
ROCK PROPERTIES
ROCK CHARACTERISTICS EXTREMELY ABRASIVE, COARSE GRAIN SIZE; SOFT TO VERY HARD, HIGHLY FRACTURED, FAULTS AND SLIDES
EXAMPLES LIMESTONE, SANDSTONE, CONGLOMERATE
SERIES
DESCRIPTION
2A
VERY HARD / FRACTURED TERRAIN
2
STANDARD
SOFT TO MEDIUM, ABRASIVE, MEDIUM TO COARSE GRAIN SIZE, FRACTURED AND CRASHED
SANDSTONE, DOLOMITE, SCHISTS, SERPENTINE, SHALE, TUFFS
3
VERY ABRASIVE / FRACTURED TERRAIN
4A
STANDARD
MEDIUM HARDNESS, ABRASIVE, MEDIUM TO COARSE GRAIN SIZE; FRACTURED
GABRO, ANDESITE, BASALT
6B
STANDARD
7
STANDARD
MEDIUM TO HARD, MODERATELY ABRASIVE, MEDIUM GRAIN SIZE, SOLID TO SLIGHTLY FRACTURED
PEGMATITE, GABRO, MONZONITE, ANDESITE
7B
HIGH PENETRATION
HARD AND COMPACT FORMATION, FINE TO MEDIUM GRAIN SIZE, SOLID, LOW ABRASIVENESS
VERY HARD AND COMPACT FORMATION, FINE GRAIN SIZE, NO ABRASIVE
PORPHYRY, GRANITE, GNEISS, GABRO
DIORITE, TACONITE, GNEISS, GRANITE
7F
VERSATILE
8
ABRASIVE / FRACTURED TERRAIN
8B
STANDARD
8C
VERSATILE, SERIES 7 TO 9
9C
STANDARD
9D 10A
EXTREMELY HARD AND COMPACT FORMATION, VERY FINE GRAIN SIZE, NO ABRASIVE HARD
NO ABRASIVE
COMPACT
10C CHERT, RHYOLITE, QUARTZ, JASPERITE, IRONSTONE
HIGH PENETRATION HIGH PENETRATION FOR NON POWERFUL DRILLS HIGH PERFORMANCE IN CHANGEABLE HARDNESS AND ABRASIVENESS
10D
HIGH PENETRATION
10E
VERSATILE, SERIES 9 TO 11
11
EXTREMELY HARD FORMATIONS OR FOR USE WITH NON POWERFUL DRILLS
Picture 4: Available series for impregnated bits Series 2A • For extremely abrasive and fractured formations. • Should be used on powerful drills with high torque and high thrust capability. Series 2 • Multipurpose, durable and versatile bit. • Can be used with high bit load without risk of excessive wear. Series 3 • For soft, very abrasive and fractured formations. • High penetration in formations that are subject to changes in rock hardness and abrasiveness. Series 4A • For soft to medium, abrasive and fractured formations. • The excessive load can significantly reduce bit life. Series 6B • Perform exceptionally well in formations that are subject to changes in rock hardness and abrasiveness. • Versatile bit with high lifetime and above average penetration rate. Series 7 • Variable formations tending to medium hardness. • Long lifetime with high torque and push toleration.
Series 8B • High penetration and lower power required. • Reduced bit pressures while maintaining or improving bit life. Series 8C • Versatile series for hard formations (7 to 9 series characteristics). • High penetration for medium formations. Series 9C • For hard to very hard formations. • Light fractured and abrasive toleration. Series 9D • High penetration in a variety of formations. • Good for hard formations with hard competent and fractured non abrasive sections. Series 10A • Standard series for extremely hard formations. • Needs high rotational speed and low bit pressure. Series 10C • High penetration for extremely hard, with slightly fractured parts, formations. • Suitable for semi competent and competent non abrasive formations.
Series 7B • High performance in hard conditions. • High penetration and lower power required.
Series 10D • High penetration for extremely hard and competent formations. • Suitable for competent and non abrasive formations
Series 7F • High performance in formations that are subject to changes in rock hardness and abrasiveness. • Should be used on powerful drills with high torque and high thrust capability.
Series 10E • High penetration for extremely hard, with fractured abrasive parts, formations. • High performance for semi competent and slightly abrasive formations.
Series 8 • Long lifetime in changing formations. • High torque and push resistance.
Series 11 • High penetration for extremely hard and competent formations. • For use specially with non powerful drill rigs.
A-4
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
IMPREGNATED BITS NON-STSTANDARD OPTIONS
Diamantina Christensen has also impregnated bits with nonstandard features upon request. In this section you can order specially designed bits according to your needs: HOW TO ORDER A NON-STANDARD FEATURE IMPREGNATED BIT? Ordering code: 1. Bit size (Chart 1, page A-8) 2. Bit series (Picture 4, previous page) 3. Discharge configuration (Picture 5 or 6) 4. Waterway configuration (Picture 7) 5. Bit blank (Picture 8)
A. REGULAR WATERWAY
B. WIDE WATERWAY
C. TURBO WATERWAY
D. FACE WATERWAY
Example: H- 4A - Deep waterway discharge for pilot core lifter case - Wide waterway - Reinforced bit blank • Impregnated bit size H • Series 4A • Deep waterway discharge for pilot core lifter case • Wide waterway • Reinforced blank
STANDARD CORE LIFTER CASE
Picture 7: Available waterways configuration
A. REGULAR DISCHARGE
B. FACE DISCHARGE
Picture 5: Available discharges for standard core lifter case
PILOT CORE LIFTER CASE
Picture 8: Reinforced bit blank upon request *Other options upon request
C. FACE DISCHARGE
D. DEEP WATERWAY
Picture 6: Available discharges for pilot core lifter case
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
A-5
CASING SHOES
GENERAL DESCRIPTION
HOW TO ORDER A SURFACE-SET DIAMOND CASING SHOE?
Diamantina Christensen introduces the latest generation of casing shoes used for drilling down or positioning casing tubes in a drilled hole
Ordering code: 1. Surface-set diamond casing shoe size (Chart 2, page A-8) Example: HW Surface-set diamond casing shoe • Surface-set diamond casing shoe size HW • 40 spc diamond size
HOW TO ORDER A IMPREGNATED CASING SHOE? Ordering code: 1. Impregnated casing shoe size (Chart 2, page A-8) Example: HW Impregnated casing shoe • Impregnated casing shoe size HW • Series 2
Options availables upon request: •
Impregnated casing shoes are recommended for hard and fractured formations while surface-set diamond casing shoes are recommended for soft to medium hard formations.
•
The inside diameter is not set with diamonds and fit with the outside diameter of the reaming shell, allowing free passage of rods, core bits, core barrels and reaming shells.
•
Standard surface-set casing shoes are produced with specially chosen diamonds of 40 spc. Other diamond sizes are availables upon request.
-
Reinforced shoe blank Series 7 and 9 for impregnated casing shoes Other diamond sizes for surface-set casing shoes
All kind of casing shoes are available. In addition, all the orders are warmly accepted according to specific customer's requirements
A-6
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
REAMING SHELLS
GENERAL DESCRIPTION
HOW TO ORDER A REAMING SHELL?
Diamantina Christensen introduces the latest generation of reaming shells utilized to maintain the hole gauge and stabilize the drilling system during the operation
How to order a reaming shell? Ordering code: 1. Reaming shell size (Chart 1, page A-8) Example: H Reaming shell • Reaming shell size H
Options: Reinforced shell blank available upon request
•
Reaming shells are produced with high quality diamonds selected to ensure an optimum performance.
•
Deep and wide waterways to facilitate effective flushing and contribute to a long life.
•
Designed to be placed behind the core bit to ensure the hole diameter and to assist the core barrel's stabilization. All kind of reaming shells are available. In addition, all the orders are warmly accepted according to specific customers requirements.
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
A-7
AVAILABLE SIZES
CORE BIT & REAMING SHELL SIZES
CASING SHOE & CASING BIT SIZES
OUTER DIAMETER INNER DIAMETER OUTER DIAMETER CORE BITS REAMING SHELLS CORE BITS
SIZES RWT (XRT)
IN
MM
IN
MM
IN
MM
1.175
29.8
0.735
18.7
1.175
29.8
CASING SIZE
OUTER DIAMETER CASING BIT & SHOE
INNER DIAMETER CASING BIT
INNER DIAMETER CASING SHOE
IN
MM
IN
MM
IN
MM
RW
1,470
37.7
1,000
25.4
1,186
30.0
XRPS
1.295
32.9
0.890
22.6
1.295
32.9
EW
1,875
47.6
1,405
35.6
1,500
37.9
EWG, EWL, EWM
1.470
37.3
0.845
21.5
1.485
37.7
AW
2,345
59.5
1,780
45.2
1,905
48.2
EWT (EXT)
1.470
37.3
0.905
23.0
1.485
37.7
BW
2,965
75.3
2,215
56.2
2,375
60.1
IEW
1.470
37.3
0.995
25.3
1.485
37.7
NW
3,615
91.8
2,840
72.1
3,000
75.9
T2-46
1.811
46.0
1.248
31.7
1.823
46.3
HW
4,625
117.4
3,778
95.9
3,925
99.6
TT46, LTK46
1.811
46.0
1.389
35.3
1.823
46.3
PW
5,650
143.5
4,632
117.4
4,858
121.3
AQ
1.875
47.6
1.062
27.0
1.890
48.0
SW
6,790
172.4
5,632
142.8
5,941
146.7
AWG, AWL, AWM
1.875
47.6
1.185
30.1
1.890
48.0
UW
7,800
196.1
6,755
171.4
6,906
175.3
ZW
8,810
223.7
7,755
196.8
7,977
200.7
ATK
1.875
47.6
1.201
30.5
1.890
48.0
AWT (AXT)
1.875
47.6
1.281
32.5
1.890
48.0
ATK34 (AW34)
1.875
47.6
1.320
33.5
1.890
48.0
JKT48, LTK48
1.875
47.6
1.389
35.3
1.890
48.0
AXC (AWC3)
1.890
48.0
1.062
27.0
1.890
48.0
T2-56
2.205
56.0
1.642
41.7
2.216
56.3
TT56, LTK56
2.205
56.0
1.783
45.3
2.216
56.3
B3
2.345
59.6
1.320
33.5
2.360
59.9
BQ
2.345
59.6
1.433
36.4
2.360
59.9
BTK
2.345
59.6
1.601
40.7
2.360
59.9
BTW
2.345
59.6
1.654
42.0
2.360
59.9
BWG, BWL, BWM
2.345
59.6
1.655
42.0
2.360
59.9
BTK44 (BW44)
2.345
59.6
1.755
44.6
2.360
59.9
BXB (BWC3)
2.360
59.9
1.433
36.4
2.360
59.9
B (oversize)
2.440
62.0
1.433
36.4
2,440
62.0
T2-66
2.598
66.0
2.035
51.7
2.609
66.3
N3, NTT
2.965
75.3
1.775
45.1
2.980
75.7
NQ
2.965
75.3
1.875
47.6
2.980
75.7
N2
2.965
75.3
1.995
50.7
2.980
75.7
NWG, NWL, NWM
2.965
75.3
2.155
54.7
2.980
75.7
NTW
2.965
75.3
2.209
56.1
2.980
75.7
NXB (NWC3)
2.980
75.7
1.875
47.6
2.980
75.7
NWD4
2.980
75.7
2.060
52.3
2.980
75.7
T2-76
2.992
76.0
2.429
61.7
3.006
76.4
N (oversize)
3.032
77.0
1.875
47.6
3,032
77.0
NXB (oversize)
3.032
77.0
1.875
47.6
3.032
77.0
HXB (HWD3)
3.650
92.7
2.400
61.0
3.650
92.7
HXB (oversize)
3.750
95.3
2.400
61.0
3.750
95.3
H3, HTT
3.763
95.6
2.406
61.1
3.783
96.1
HQ
3.763
95.6
2.500
63.5
3.783
96.1
H (oversize)
3.830
97.3
2.500
63.5
3.850
97.8
HWG
3.890
98.8
3.000
76.2
3.907
99.2
CHD101
3.968
100.8
2.500
63.5
3.990
101.3
P3
4.805
122.0
3.270
83.1
4.828
122.6
PQ
4.805
122.0
3.345
85.0
4.828
122.6
Chart 2: Available casing shoe sizes
Chart 1: Available core bit and reaming shell sizes
A-8
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
OPERATIONAL PARAMETERS
The most important parameters to consider for a correct function of the bits are: Rotational Speed Bit Weight Fluid Flow
penetration will be reduced, so you should decrease rpm or increase the penetration rate by increasing bit weight. Bit weight
Rotational Speed The rotational speed depends on the types of formation that are being perforated and the interrelation among the capacities of the drill and the individual style of drilling. The most important factor to consider to optimize the bit life is the penetration rate index or RPI. This factor is determined by dividing the rotational speed (rev / min) by the penetration rate (in / min). Example: 1200 (rev/min) at 6 (in/min) will result in RPI = 1200 rpm = 200 rev/in 6 in/min For optimum performance, the operator should maintain a penetration rate index between 200 - 250 revolutions per inch drilled. If RPI rate is too low an excessive wear will occur to your bit, so you should either increase rpm or decrease the penetration rate by reducing bit weight. On the other hand, if the RPI is too high, the bit might polish and the velocity of
The bit weight should be applied depending on the velocity of rotation to maintain the bit penetrating, just as the RPI factor indicate. Nevertheless, if the load applied is too high can cause a premature wear of the bit or even a mechanical failure. If the load applied is too low, the bit might polish requiring the matrix surface to be removed to expose a new layer of diamonds. Fluid Flow The fluid flow is another critical variable to optimize the drilling efficiency. The purpose of this fluid is to cold down and to minimize the accumulattion of material at the bit face. Generally, cuttings should always have an upward velocity of 4 inch/sec (10cm/sec). A too high volume of fluid can cause hydraulic lift that seriously affect the bit weight and consequently drilling performance. A low volume of fluid can cause a premature wear of the crown due to the abrasive action of the cuttings. The following chart ilustrate the minimum and maximum operational parameters to achieve a optimum performance for impregnated bits:
OPERATIONAL PARAMETERS BIT SIZE
FLUID FLOW Gal/Min
TT-46
A
B
N
HQ
P
2.5 - 3.5
4-5
6-8
8 - 10
10 - 12
18 - 23
Litres/Min 9 - 13
15 - 19
23 - 30
30 - 38
38 - 45
68 - 87
ROTATIONAL SPEED
BIT WEIGHT Lb 1,000-3,000
2,000-5,000
2,000-5,000
3,000-6,000
4,000-8,000
5,000-10,000
Kg 450 - 1,350
900 - 2,270
900 - 2,270
1,360 - 2,720
1,810 - 3,630
2,270 - 4,540
PENETRATION RATE INDEX (In/Min)
PENETRATION RATE INDEX (Cm/Min)
RPM
200 RPI
250 RPI
80 RPC
2,300
11.5
9.2
29
100 RPC 23
1,400
7
5.6
18
14
1,000
5
4
13
10
2,000
10
8
25
20
1,200
6
4.8
15
12
850
4.25
3.4
11
9
1,700
8.5
6.8
22
17 10
1,000
5
4
13
700
3.5
2.8
9
7
1,350
6.75
5.4
17
14
800
4
3.2
10
8
550
2.75
2.2
7
6
1,000
5
4
13
10
600
3
2.4
8
6
400
2
1.6
5
4
800
4
3.2
10
8
500
2.5
2
6
5
350
1.75
1.4
4
4
Chart 3: Oprerational perameters for impregnated bits
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
A-9
WEAR PATTERNS
When an impregnated bit is removed from the drill hole after use, the resulting wear pattern is an important source of information for the operator. The following illustrations will help identify and remedy many of the common fields problems: CRACKED WATERWAYS
NEW BIT A bit face without use
Possible causes: - Excessive bit load - The drill string was accidentally dropped in the hole - Free fall of the inner tube through the drill rod string in a dry hole - Bit crushed by the rod holder or foot clamp
BURNT CROWN Lack of fluid circulation throught the bit face
IDEAL WEAR PATTERN The face wear pattern on a properly used impregnated bit should be relatively flat with slightly chamfered sides
Possible causes: - Internal core barrel fluid restrictions due to the incorrect adjustment of the inner tube - Fluid leaks in the drill rod string, water swivel or hoses - Failure of the fluid circulation pump - Blocked waterway canals of the bit by pebbles or other debris
OUTER DIAMETER GAUGE LOSS NORMAL RETIREMENT The bit must be retired when the full depth of impregnation is evenly consumed. The first indicator that a bit is normal retirement is a rise in pump pressure due to the diminishing depth of waterways
A-10
Possible causes and solutions: - Vibration: Lower the rotational speed - Lack of fluid circulation: Check possible leaks or increase the flow rate - Bit is reaming an undersized hole: Check the reaming shell diameter and replaced if found undersized
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WEAR PATTERNS
CONVEX FACE WEAR
EXCESSIVE DIAMOND EXPOSURE The matrix abrades away before the diamonds have become worn. Because of the insufficient matrix, the diamonds are released prematurely resulting in low bit life.
Possible causes and solutions: - Insufficient fluid circulation throught the bit face: Check possible leaks in the drill rod string or increase the pump output - Cutting remains at the outside edge of the hole, wearing the outside rim of the bit: Increase the fluid flow
Possible causes and solutions: - The penetration rate is too high for the rotational speed in use: Increase the rotational speed or reduce the penetration rate - The matrix is too soft for the ground conditions: Change to a lower series bit
INNER DIAMETER GAUGE LOSS Possible causes and solutions: - The bit is overfeeded: Reduce the penetration rate - Drilling into a highly broken formation: Change to a lower series bit - Drilling over lost core: Check the core tube contents - Lack of fluid circulation: Examinate the inner tube length adjustment to ensure that there are no fluid restrictions within the core barrel assembly. Also check possible leaks in the drill rod string and the pump output
GLAZED FACE The diamonds on the bit face have become completely embedded in the matrix Solutions: - Drill with a higher penetration rate, slower rotational speed or lower fluid circulation rate in order to abrade the matrix and re-expose the diamond crystals - If the bit face glazes repeatedly, change to a higher series number
CONCAVE FACE WEAR SHARPENING TECHNIQUES: Possible causes and solutions: - Excessive penetration rate for the rotational speed used: Reduce the penetration rate or/and increase the rotational speed - This wear pattern also can be caused by core grindings or overdrilling
Out of-Hole Method: sandblast the face with an abrasive media, or use a tapping action with a flat file to roughen the surface of the bit face. In-Hole Method: with the bit on the bottom of the drill hole, reduce the rotational speed to about 50% to 70% of the normal rotational speed. Try to maintain a constant penetration rate for a distance of ½ to 1½ inches (1-3cm) while bit pressure gradually increase, then the bit pressure will drop quickly indicating that the bit face has sharpened and will now cut freely. Important: inmediately reduce bit pressure and increase rotational speed to conform to the correct RPI.
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
A-11
TABLE OF CONTENTS WIRELINE CORE BARREL SECTION
SECTION B Wireline Core Barrels & Overshot
B-2
Wireline Accessories
B-12
Wireline Overshots "Roller Type"
B-14
Wireline Core Barrel Triple Tube
B-18
Wireline Conversion Kits W/L to W/L 3
B-26
Wireline Core Lifter Options W/L 3
B-27
Fluid Control Kit
B-28
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-1
WIRE LINE CORE BARREL "KNUCKLE HEAD" SIZE: A W/L Assemblies Group A B C
Description
Part Number
Weight Lbs.
Kgs.
42010001005
A W/L Core Barrel Assy x 5'
35.00
15.80
42010001010
A W/L Core Barrel Assy x 10'
58.00
26.30
42010002005
A W/L Inner Tube Assy x 5'
11.00
4.90
42010002010
A W/L Inner Tube Assy x 10'
16.00
7.20
42010003000
A W/L Head Assy.
5.70
2.50
42010013000 Locking coupling standard
42010004095 Lock nut
42010004100 Spindle assy 42010014000 Adaptor coupling
42010016000 Landing ring
42010004005 Spearhead point 42010004020 Spring pin (5/16" x 3/4")
42010009005 Inner Tube - 5' 42010009010 Inner Tube - 10'
42010004010 Compression spring 42010004015 Detent plunger
42010004105 Shut-off valve (2)
42010004045 Spearhead base
42010004110 Valve adjusting washer (2) 42010020005 Outer Tube- 5' 42010020010 Outer Tube - 10'
42010004115 Ball thrust bearing 42010004035 Latch retracting case
42010004120 Spindle bearing 42010004160 Hanger bearing
42010004050 Latch spring
42010004130 Compression spring
42010004055 Latch (2)
42010004135 Self lock nut 42010018000 Inner tube stabilizer
42010011000 Stop ring
42010004065 Latch support
42010004145 Grease fitting
42010019000 Thread protector
42010010000 Core lifter case
42010004150 Steel ball
B-2
42010004070 Spring pin (1/4" x 3/4")
42010004080 Upper body 42010004075 Latch body assy
42010004090 Lower body
42010004155 Check valve body
A
42010004020 Spring pin (5/16" x 3/4")
42010004085 Landing shoulder
42010004140 Inner tube cap assy FF
42010012000 Core lifter
42010004040 Spring pin (2) (5/16" x 1 1/8")
B
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "KNUCKLE HEAD" SIZE: A W/L Assemblies Group
Part Number
Description
A
42013001005
A W/L Over Shot Assy
B
42013002000
A W/L Cable Swivel Assy
Weight Lbs.
Kgs.
16.35
7.40
0.56
0.20
42013003010 Wire rope thimble (3/16")
42013004100 Jar tube weldment
42013003015 Eye bolt
B 42013003020 Cable swivel collar 42013003025 Needle thrust bearing
42013003300 Selft lock nut
42013003030 Nut 42013003035 Cotter pin (3/32" x 1")
42013003500 Jar staff 42010004145 Grease fitting
42013003200 Cable swivel body
42013003600 Overshot head 42013003900 Spiral pin (2) (3/16" x 1")
42013004200 Jar head bottom
42013003700 Lifting dog spring
42013003800 Lifting dog pivot pin (3/8"x 1 1/8")
42013004000 Lifting dog (2) 42013003400 Locking sleeve
42013003900 Spring pin (3/16" x 1")
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-3
WIRE LINE CORE BARREL "KNUCKLE HEAD" SIZE: B W/L Assemblies Group A B C
Description
Part Number
Weight Lbs.
Kgs.
42020001005
B W/L Core Barrel Assy x 5'
54.00
24.50
42020001010
B W/L Core Barrel Assy x 10'
90.00
40.80
42020002005
B W/L Inner Tube Assy x 5'
21.00
9.50
42020002010
B W/L Inner Tube Assy x 10'
28.00
12.70
42020003000
B W/L Head Assy.
11.50
5.20
42020013000 Locking coupling standard
42020004095 Lock nut
42020004100 Spindle assy 42020014000 Adaptor coupling
42020016000 Landing ring
42020004005 Spearhead point 42020004020 Spiral pin (7/16" x 1")
42020009005 Inner Tube - 5' 42020009010 Inner Tube - 10'
42020004010 Compression spring 42020004015 Detent plunger
42020004105 Shut-off valve (2)
42020004045 Spearhead base
42020004110 Valve adjusting washer (2) 42020020005 Outer Tube - 5' 42020020010 Outer Tube - 10'
42020004115 Ball thrust bearing 42020004035 Latch retracting case
42020004120 Spindle bearing 42020004115 Ball thrust bearing
42020004050 Latch spring
42020004130 Compression spring
42020004055 Latch (2)
42020004135 Self lock nut 42020018000 Inner tube stabilizer
42010011000 Stop ring
42020004065 Latch support
42010004145 Grease fitting
42010012000 Core lifter 42020019000 Thread protector
42010010000 Core lifter case
B-4
42020004070 Spring pin (1/4" x 1 1/4")
42020004080 Upper body 42020004075 Latch body assy
42020004090 Lower body
42020004155 Check valve body
A
42020004060 Spiral pin (3/8" x 1 1/4")
42020004085 Landing shoulder
42020004140 Inner tube cap assy FF
42020004150 Steel ball
42020004040 Spring pin (2) (3/8" x 1 5/8")
B
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "KNUCKLE HEAD" SIZE: B W/L Assemblies Group
Part Number
Description
A
42023001005
B W/L Over Shot Assy
B
42013002000
A W/L Cable Swivel Assy
Weight Lbs.
Kgs.
23.00
10.40
0.56
0.20
42013003010 Wire rope thimble (3/16")
42013003015 Eye bolt
42023004200 Jar tube weldment
B 42013003020 Cable swivel collar 42013003025 Needle thrust bearing 42013003030 Nut
42023003300 Selft lock nut
42013003035 Cotter pin (3/32" x 1")
42023003500 Jar staff 42010004145 Grease fitting
42023003200 Cable swivel body
42023004300 Spiral pin (2) (7/32" x 1 1/4")
42023003600 Machine screw
42023003800 Lifting dog spring
42023004100 Lifting dog (2)
42023003400 Locking sleeve
42023003900 Lifting dog pivot pin (1/8"x 1 7/16")
42023004000 Spring pin (3/16" x 1 3/8") 42023003700 Overshot head
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-5
WIRE LINE CORE BARREL "KNUCKLE HEAD" SIZE: N W/L Assemblies Group A B C
Part Number
Description
42030001005
Weight Lbs.
Kgs.
N W/L Core Barrel Assy x 5'
89.70
40.70
42030001010
N W/L Core Barrel Assy x 10'
138.00
62.40
42030002005
N W/L Inner Tube Assy x 5'
34.40
15.60
42030002010
N W/L Inner Tube Assy x 10'
47.00
21.30
42030003000
N W/L Head Assy.
20.13
9.10
42030013000 Locking coupling standard
42030004095 Lock nut
42030004100 Spindle assy 42030014000 Adaptor coupling
42030016000 Landing ring
42020004005 Spearhead point 42020004020 Spiral pin (7/6" x 1")
42030009005 Inner Tube - 5' 42030009010 Inner Tube - 10'
42020004010 Compression spring 42020004015 Detent plunger
42030004105 Shuft-off valve (2)
42030004045 Spearhead base
42030004110 Valve adjusting washer (2) 42030020005 Outer Tube - 5' 42030020010 Outer Tube - 10'
42030004115 Ball thrust bearing 42030004035 Latch retracting case
42030004120 Spindle bearing 42030004160 Hanger bearing
42030004050 Latch spring
42030004130 Compression spring
42030004055 Latch (2)
42030004135 Self lock nut 42030018000 Inner tube stabilizer
42030011000 Stop ring
42030004065 Latch support
42010004145 Grease fitting
42030012000 Core lifter 42030019000 Thread protector
42030010000 Core lifter case
B-6
42030004070 Spring pin (1/4" x 1 1/2")
42030004080 Upper body 42030004075 Latch body assy
42030004090 Lower body
42030004155 Check valve body
A
42030004060 Spring pin (1/2" x 1 1/2")
42030004085 Landing shoulder
42030004140 Inner tube cap assy FF
42030004150 Steel ball
42030004040 Spring pin (2) (1/2" x 2)
B
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "KNUCKLE HEAD" SIZE: N W/L Assemblies Group
Part Number
Description
A
42033001005
N W/L Over Shot Assy
B
42013002000
A W/L Cable Swivel Assy
Weight Lbs.
Kgs.
35.35
16.00
0.56
0.20
42013003010 Wire rope thimble (3/16")
42013003015 Eye bolt
42033004200 Jar tube weldment
B 42013003020 Cable swivel collar 42013003025 Needle thrust bearing 42013003030 Nut
42033003300 Selft lock nut
42013003035 Cotter pin (3/32" x 1")
42033003500 Jar staff 42010004145 Grease fitting
42033003200 Cable swivel body
42033004300 Spiral pin (2) (1/4" x 1 1/2")
42023003600 Machine screw
42023003800 Lifting dog spring
42033004100 Lifting dog (2)
42033003400 Locking sleeve
42033003900 Lifting dog pivot pin (1/2" x 1 15/16")
42033004000 Spring pin (1/4" x 1 3/4") 42033003700 Overshot head
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-7
WIRE LINE CORE BARREL "KNUCKLE HEAD" SIZE: H W/L Assemblies Group A B C
Description
Part Number
Weight Lbs.
Kgs.
42040001005
H W/L Core Barrel Assy x 5'
145.00
65.90
42040001010
H W/L Core Barrel Assy x 10'
214.50
97.20
42040002005
H W/L Inner Tube Assy x 5'
60.50
27.40
42040002010
H W/L Inner Tube Assy x 10'
79.00
35.80
42040003000
H W/L Head Assy.
41.25
18.70
42040013000 Locking coupling standard
42040004095 Lock nut
42040004100 Spindle assy 42040014000 Adaptor coupling
42040016000 Landing ring
42020004005 Spearhead point 42020004020 Spiral pin (7/16" x 1")
42040009005 Inner Tube - 5' 42040009010 Inner Tube - 10'
42020004010 Compression spring 42020004015 Detent plunger
42040004105 Shut-off valve (2)
42040004110 Valve adjusting washer (2)
42040020005 Outer Tube - 5' 42040020010 Outer Tube - 10'
42040004045 Spearhead base
42040004115 Ball thrust bearing (2) 42040004035 Latch retracting case
42040004120 Spindle bearing 42030004115 Ball thrust bearing
42040004050 Latch spring
42040004130 Compression spring
42040004055 Latch (2)
42040004135 Self lock nut 42040018000 Inner tube stabilizer
42040011000 Stop ring
42040004065 Latch support
42010004145 Grease fitting
42040012000 Core lifter 42040019000 Thread protector
42040010000 Core lifter case
B-8
42040004070 Spring pin (3/8" x 2")
42040004080 Upper body 42040004075 Latch body assy
42040004090 Lower body
42030004155 Check valve body
A
42030004040 Spring pin (1/2" x 2")
42040004085 Landing shoulder
42040004140 Inner tube cap assy FF
42030004150 Steel ball
42040004040 Spring pin (2) (1/2" x 2 3/4")
B
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "KNUCKLE HEAD" SIZE: H W/L Assemblies Group
Part Number
Description
A
42043001005
H W/L Over Shot Assy
B
42013002000
A W/L Cable Swivel Assy
Weight Lbs.
Kgs.
38.60
17.50
0.56
0.20
42013003010 Wire rope thimble (3/16")
42013003015 Eye bolt
42033004200 Jar tube weldment
B 42013003020 Cable swivel collar 42013003025 Needle thrust bearing 42013003030 Nut
42033003300 Selft lock nut
42013003035 Cotter pin (3/32" x 1")
42033004300 Spiral pin (2) (1/4" x 1 1/2")
42033003500 Jar staff
42023003800 Lifting dog Spring
42010004145 Grease fitting 42033004100 Lifting dog (2)
42033003200 Cable swivel body
42023003600 Machine screw
42043003900 Lifting dog pivot pin (1/2"x 2 9/16")
42043003700 Overshot head
42033003400 Locking sleeve
42043004300 Sleeve adapter
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-9
WIRE LINE CORE BARREL "KNUCKLE HEAD" SIZE: P W/L Assemblies Group A B C
Description
Part Number
Weight Lbs.
Kgs.
42050001005
P W/L Core Barrel Assy x 5'
232.00
104.80
42050001010
P W/L Core Barrel Assy x 10'
325.00
147.20
42050002005
P W/L Inner Tube Assy x 5'
116.00
52.40
42050002010
P W/L Inner Tube Assy x 10'
142.00
64.40
42050003000
P W/L Head Assy.
87.45
39.70
42050004085 landing shoulder 42050004095 lock nut
42050013000 Locking coupling standard
42050004100 Spindle assy
42050014000 Adaptor coupling 42050004103 Shut-off valve (2)
42050016000 Landing ring
42050004110 Valve adjusting washer (3)
42050009005 Inner Tube - 5' 42050009010 Inner Tube - 10'
42050020005 Outer Tube - 5' 42050020010 Outer Tube - 10'
42010004145 Grease fitting
42050004117 Thrust bearing spacer (2)
42050003005 Spearhead point
42050004120 Spindle bearing with cage
42050004115 Ball thrust bearing (2)
42050003010 Pivot pin (3/4" x 2 1/4") 42050003020 Compression spring 42050003025 Detent plunger
42050004117 Thrust bearing spacer (2)
42050004045 Spearhead base
42050004132 Thrust bearing spacer 42050004130 Compression spring 42050004131 Spring retaining washer
42050004135 Self lock nut 42050018000 Inner tube stabilizer
42050011000 Stop ring 42050012000 Core lifter
42050019000 Thread protector
42050010000 Core lifter case
42010004145 Grease fitting
B-10
42050004050 42050004140 Latch spring Inner tube cap assy FF 42050004055 Latch (2)
65100000040 Steel ball
42050004165 O'ring 42050004065 Latch support
42050004155 Check valve body
A
42050004035 Latch retracting case
B
C
42050004040 Spiral pin (2) (3/4" x 3 3/4")
42030004040 Spring pin (2) (1/2" x 2") 42040004040 Spring pin (1/2" x 2 3/4") 42050004075 latch body with landing shoulder
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "KNUCKLE HEAD" SIZE: P W/L Assemblies Group
Part Number
Description
A
42053001005
P W/L Over Shot Assy
B
42053002000
P W/L Cable Swivel Assy
Weight Lbs.
Kgs.
93.15
42.30
4.40
2.00
42053003010 Wire rope thimble (5/16")
42053003015 Eye bolt
42033004200 Jar tube weldment
B 42053003020 Cable swivel collar 42020004115 Ball thrust bearing 42053003030 Nut
42053003300 Self lock nut
42053003035 Cotter pin (1/8" x 1 3/4")
42010004145 Grease fitting
42053003500 Jar staff
42053003200 Cable swivel body
42053004300 Spiral pin (2) (5/16" x 2")
42053003800 Lifting dog spring
42053004100 Lifting dog (2)
42053003900 Lifting dog pivot pin (1" x 3 5/16") 42053004400 Spring pin (1/4" x 3")
42053003400 Locking sleeve
42053003700 Overshot head
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-11
WIRE LINE OPTIONS
CHROME PLATED INNER TUBE 5' A W/L
42010009105
B W/L
42020009105
N W/L
42030009105
H W/L
42040009105
P W/L
42050009105
10'
B-12
A W/L
42010009110
B W/L
42020009110
N W/L
42030009110
H W/L
42040009110
P W/L
42050009110
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OPTIONS
CARBIDE LOCKING COUPLING
LOCKING COUPLING PLAIN
A W/L
42010013200
A W/L
42010013300
B W/L
42020013200
B W/L
42020013300
N W/L
42030013200
N W/L
42030013300
NM W/L
42035013200
NM W/L
42035013300
H W/L
42040013200
H W/L
42040013300
HM W/L
42045013200
HM W/L
42045013300
P (HW CASING)
42050013200
P (HW CASING)
42050013300
P (HWT BOX)
42050013201
P (HWT BOX)
42050013301
BROACHED CORE LIFTER A W/L
42010012005
B W/L
42020012005
N W/L
42030012005
H W/L
42040012005
P W/L
42050012005
SHUT OFF VALVE SOFT B W/L
42020004106
N W/L
42030004106
H W/L
42040004106
FRONTAL DISCHARGE CORE LIFTER CASE N W/L
42030010005
H W/L
42040010005
P W/L
42050010005
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-13
WIRE LINE OVER SHOT "ROAD RUNNER" SIZE: A W/L Assemblies Group
Part Number
Description
A
42015001005
A W/L Overshot Road Runner Assy
B
42013002000
A W/L Cable Swivel Assy
Weight Lbs.
Kgs.
00.00
00.00
0.56
0.20
34025003004 Bolt socket head (3)
42013003010 Wire rope thimble (3/16")
34025003012 Road runner bearing (3) 42013003015 Eye bolt
34025003030 Road runner wheel (3)
42013004200 Jar head bottom
42013003900 Spring pin (2) (3/16" x 1")
B 42013003020 Cable swivel collar
42025002000 Road runner assy
42013003025 Needle thrust bearing
42013003400 Locking sleeve
42013003030 Nut 42013003035 Cotter pin (3/32" x 1") 42013004100 Jar tube weldment
42013003200 Cable swivel body
42013003900 Spring pin (2) (3/16" x 1")
42023003600 Overshot head
42013003300 Self lock nut 42013003700 Lifting dog spring 42013003800 Lifting dog pivot pin (3/8" x 1 1/8")
42013003500 Jar staff 42013004000 Lifting dog (2)
42013003900 Spring pin (3/16" x 1")
A
B-14
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "ROAD RUNNER" SIZE: B W/L Assemblies Group
Part Number
Description
A
42025001005
B W/L Overshot Road Runner Assy
B
42013002000
A W/L Cable Swivel Assy
Weight Lbs.
Kgs.
00.00
00.00
0.56
0.20
34025003006 Bolt socket head (3)
42013003010 Wire rope thimble (3/16")
34025003012 Road runner bearing (3) 42013003015 Eye bolt
34025003035 Road runner wheel (3)
B 42013003020 Cable swivel collar
34025002040 Road runner assy
42013003025 Needle thrust bearing 42013003030 Nut 42013003035 Cotter pin (3/32" x 1")
42010004145 Grease fitting
42023003200 Cable swivel body
42023004200 Jar tube weldment
42023004300 Spiral pin (2) (7/32" x 1 1/4") 42023003300 Self lock nut 42023003800 Lifting dog spring
42023003600 Machine screw
42023003900 Lifting dog pivot pin (1/2" x 1 15/16")
42023003500 Jar staff 42023004100 Lifting dog (2)
42023004000 Spring pin (3/16" x 1" 3/8") 42023003700 Overshot head
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-15
WIRE LINE OVER SHOT "ROAD RUNNER" SIZE: N W/L Assemblies Group
Part Number
Description
A
42035001005
N W/L Overshot Road Runner Assy
B
42013002000
A W/L Cable Swivel Assy
Weight Lbs.
Kgs.
00.00
00.00
0.56
0.20
34025003005 Bolt socket head (3)
42013003010 Wire rope thimble (3/16")
34025003012 Road runner bearing (3) 42013003015 Eye bolt
34025003040 Road runner wheel (3)
B 42013003020 Cable swivel collar
34025002050 Road runner assy
42013003025 Needle thrust bearing 42013003030 Nut 42013003035 Cotter pin (3/32" x 1")
42010004145 Grease fitting
42033003200 Cable swivel body
42033004200 Jar tube weldment
42033004300 Spiral pin (2) (1/4" x 1 1/2") 42033003300 Self lock nut 42023003800 Lifting dog spring
42023003600 Machine screw
42033003900 Lifting dog pivot pin (1/2" x 1 15/16")
42033003500 Jar staff 42033004100 Lifting dog (2)
42033004000 Spring pin (1/4" x 1 3/4") 42033003700 Overshot head
A
B-16
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "ROAD RUNNER" SIZE: H W/L Assemblies Group
Part Number
Description
A
42045001005
H W/L Overshot Road Runner Assy
B
42013002000
A W/L Cable Swivel Assy
Weight Lbs.
Kgs.
00.00
00.00
0.56
0.20
34025003005 Bolt socket head (3)
42013003010 Wire rope thimble (3/16")
34025003012 Road runner bearing (3) 42013003015 Eye bolt
34025003045 Road runner wheel (3)
B 42013003020 Cable swivel collar
34025002060 Road runner assy
42013003025 Needle thrust bearing 42013003030 Nut 42013003035 Cotter pin (3/32" x 1")
42010004145 Grease fitting
42033004200 Jar tube weldment
42033004300 Spiral pin (2) (1/4"x 1 1/2") 42023003800 Lifting dog spring
42023003600 Machine screw
42043003900 Lifting dog pivot pin (1/2"x 2 9/16")
42033003200 Cable swivel body
42033004100 Lifting dog (2) 42033003300 Self lock nut
42043003700 Overshot head
42033003500 Jar staff
42043004300 Sleep adapter
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-17
WIRE LINE CORE BARREL TRIPLE TUBE "KNUCKLE HEAD" SIZE: B W/L-3 Assemblies Group A B C
Description
Part Number
Weight Lbs.
Kgs.
42021001005
B W/L-3 Core Barrel Assy x 5'
60.20
27.3
42021001010
B W/L-3 Core Barrel Assy x 10'
97.00
44.1
42021002005
B W/L-3 Inner Tube Assy x 5'
26.30
11.9
42021002010
B W/L-3 Inner Tube Assy x 10'
36.30
16.5
42020003000
B W/L KH Head Assy.
11.50
5.2
42020004095 Lock nut
42021006000 "O" ring
42021005000 Piston plug
42021007000 Piston 42020013000 Locking coupling standard
42021017000 Adaptor 42020004100 Spindle assy
42021008005 Split Tube - 5' 42021008010 Split Tube - 10'
42020004005 Spearhead point
42020014000 Adaptor coupling
42020004010 Compression spring
42020004105 Shut-off valve (2)
42020016000 Landing ring
42020004015 Detent plunger 42020004110 Valve adjusting washer (2)
42020020005 Outer Tube - 5' 42020020010 Outer Tube - 10'
42020004045 Spearhead base
42020004115 Ball thrust bearing 42020009005 Inner Tube - 5'
42020004035 Latch retracting case
42020004120 Spindle bearing
42020009010 Inner Tube - 10'
42020004020 Spiral pin (7/16" x 1")
42020004040 Spring pin (2) (3/8" x 1 5/8")
42020004115 Ball thrust bearing 42020004050 Latch spring
42020004130 Compression spring
42020004055 Latch (2)
42020004135 Self lock nut
42020004060 Spiral pin (3/8" x 1 1/4")
42020004070 Spring pin (1/4" x 1 1/4")
42020004065 Latch support
42020018000 Inner tube stabilizer
42020019000 Thread protector
42021011000 Stop ring
42010004145 Grease fitting
42020004085 Landing shoulder
42020004140 Inner tube cap assy FF
42021012000 Core lifter 42021010000 Core lifter case
42020004150 Steel ball
42020004075 Latch body assy
42020004090 Lower body
42020004155 Check valve body
A
B-18
42020004080 Upper body
B
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "KNUCKLE HEAD" SIZE: B W/L Assemblies Group
Part Number
Description
A
42023001005
B W/L Over Shot Assy
B
42013002000
A W/L Cable Swivel Assy
Weight Lbs.
Kgs.
23.00
10.40
0.56
0.20
42013003010 Wire rope thimble (3/16")
42013003015 Eye bolt
42023004200 Jar tube weldment
B 42013003020 Cable swivel collar 42013003025 Needle thrust bearing 42013003030 Nut
42023003300 Selft lock nut
42013003035 Cotter pin (3/32" x 1")
42023003500 Jar staff 42010004145 Grease fitting
42023003200 Cable swivel body
42023004300 Spiral pin (2) (7/32" x 1 1/4")
42023003600 Machine screw
42023003800 Lifting dog spring
42023004100 Lifting dog (2)
42023003400 Locking sleeve
42023003900 Lifting dog pivot pin (1/8"x 1 7/16")
42023004000 Spring pin (3/16" x 1 3/8") 42023003700 Overshot head
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-19
WIRE LINE CORE BARREL TRIPLE TUBE "KNUCKLE HEAD" SIZE: N W/L-3 Assemblies Group A B C
Description
Part Number
Weight Lbs.
Kgs.
42031001005
N W/L-3 Core Barrel Assy x 5'
97.65
44.3
42031001010
N W/L-3 Core Barrel Assy x 10'
150.70
68.2
42031002005
N W/L-3 Inner Tube Assy x 5'
40.60
18.5
42031002010
N W/L-3 Inner Tube Assy x 10'
58.20
26.5
42030003000
N W/L KH Head Assy.
20.13
9.1
42030004095 Lock nut
42031006000 "O" ring
42021005000 Piston plug
42031007000 Piston 42030013000 Locking coupling standard
42031017000 Adaptor 42030004100 Spindle assy
42031008005 Split Tube - 5' 42031008010 Split Tube - 10'
42020004005 Spearhead point
42030014000 Adaptor coupling
42020004010 Compression spring
42030004105 Shut-off valve (2)
42030016000 Landing ring
42020004015 Detent plunger 42030004110 Valve adjusting washer (2)
42030020005 Outer Tube - 5' 42030020010 Outer Tube - 10'
42030004045 Spearhead base
42030004115 Ball thrust bearing 42030009005 Inner Tube - 5'
42030004035 Latch retracting case
42030004120 Spindle bearing
42030009010 Inner Tube - 10'
42020004020 Spiral pin (7/16" x 1")
42030004040 Spring pin (2) (1/2" x 2")
42030004160 Hanger bearing 42030004050 Latch spring
42030004130 Compression spring
42030004055 Latch (2)
42030004135 Self lock nut
42030004060 Spiral pin (1/2" x 1 1/2")
42030004070 Spring pin (1/4" x 1 1/2")
42030004065 Latch support
42030018000 Inner tube stabilizer
42030019000 Thread protector
42031011000 Stop ring
42010004145 Grease fitting
42030004085 Landing shoulder
42030004140 Inner tube cap assy
42031012000 Core lifter 42031010000 Core lifter case
42030004150 Steel ball
42030004075 Latch body assy
42030004090 Lower body
42030004155 Check valve body
A
B-20
42030004080 Upper body
B
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "KNUCKLE HEAD" SIZE: N W/L Assemblies Group
Part Number
Description
A
42033001005
N W/L Over Shot Assy
B
42013002000
A W/L Cable Swivel Assy
Weight Lbs.
Kgs.
35.35
16.00
0.56
0.20
42013003010 Wire rope thimble (3/16")
42013003015 Eye bolt
42033004200 Jar tube weldment
B 42013003020 Cable swivel collar 42013003025 Needle thrust bearing 42013003030 Nut
42033003300 Selft lock nut
42013003035 Cotter pin (3/32" x 1")
42033003500 Jar staff 42010004145 Grease fitting
42033003200 Cable swivel body
42033004300 Spiral pin (2) (1/4" x 1 1/2")
42023003600 Machine screw
42023003800 Lifting dog spring
42033004100 Lifting dog (2)
42033003400 Locking sleeve
42033003900 Lifting dog pivot pin (1/2" x 1 15/16")
42033004000 Spring pin (1/4" x 1 3/4") 42033003700 Overshot head
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-21
WIRE LINE CORE BARREL TRIPLE TUBE "KNUCKLE HEAD" SIZE: H W/L-3 Assemblies Group A B C
Description
Part Number
Weight
42041001005
H W/L-3 Core Barrel Assy x 5'
156.70
71.2
42041001010
H W/L-3 Core Barrel Assy x 10'
232.35
105.3
42041002005
H W/L-3 Inner Tube Assy x 5'
72.36
32.9
42041002010
H W/L-3 Inner Tube Assy x 10'
96.11
43.7
42040003000
H W/L KH Head Assy.
41.25
18.7
42040004095 Lock nut
42041006000 "O" ring
Kgs.
Lbs.
42021005000 Piston plug
42041007000 Piston 42040013000 Locking coupling standard
42041017000 Adaptor 42040004100 Spindle assy
42041008005 Split Tube - 5' 42041008010 Split Tube - 10'
42020004005 Spearhead point
42040014000 Adaptor coupling
42020004010 Compression spring
42040004105 Shut-off valve (2)
42040016000 Landing ring
42020004015 Detent plunger 42040004110 Valve adjusting washer (2)
42040020005 Outer Tube - 5' 42040020010 Outer Tube - 10'
42040004045 Spearhead base
42040004115 Ball thrust bearing (2) 42040009005 Inner Tube - 5'
42040004035 Latch retracting case
42040004120 Spindle bearing
42040009010 Inner Tube - 10'
42020004020 Spiral pin (7/16" x 1")
42040004040 Spring pin (2) (1/2" x 2 3/4")
42030004115 Ball Thrust bearing 42040004050 Latch spring
42040004130 Compression spring
42040004055 Latch (2)
42040004135 Self lock nut
42040004065 Latch support
42040018000 Inner tube stabilizer
42040019000 Thread protector
42041011000 Stop ring
42010004145 Grease fitting
42040004080 Upper body
42040004140 Inner tube cap assy
42030004150 Steel ball
42040004075 Latch body assy
42040004090 Lower body
42030004155 Check valve body
A
B-22
42040004070 Spring pin (3/8" x 2")
42040004085 Landing shoulder
42041012000 Core lifter 42041010000 Core lifter case
42030004040 Spring pin (1/2" x 2")
B
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "KNUCKLE HEAD" SIZE: H W/L Assemblies Group
Part Number
Description
A
42043001005
H W/L Over Shot Assy
B
42013002000
A W/L Cable Swivel Assy
Weight Lbs.
Kgs.
38.60
17.50
0.56
0.20
42013003010 Wire rope thimble (3/16")
42013003015 Eye bolt
42033004200 Jar tube weldment
B 42013003020 Cable swivel collar 42013003025 Needle thrust bearing 42013003030 Nut
42033003300 Selft lock nut
42013003035 Cotter pin (3/32" x 1")
42033004300 Spiral pin (2) (1/4" x 1 1/2")
42033003500 Jar staff
42023003800 Lifting dog Spring
42010004145 Grease fitting 42033004100 Lifting dog (2)
42033003200 Cable swivel body
42023003600 Machine screw
42043003900 Lifting dog pivot pin (1/2"x 2 9/16")
42043003700 Overshot head
42033003400 Locking sleeve
42043004300 Sleeve adapter
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-23
WIRE LINE CORE BARREL TRIPLE TUBE "KNUCKLE HEAD" SIZE: P W/L-3 Assemblies Group A B C
42051006000 "O" ring
Description
Part Number
Weight Lbs.
Kgs.
42051001005
P W/L-3 Core Barrel Assy x 5'
249.45
112.70
42051001010
P W/L-3 Core Barrel Assy x 10'
351.25
159.10
42051002005
P W/L-3 Inner Tube Assy x 5'
132.96
60.40
42051002010
P W/L-3 Inner Tube Assy x 10'
167.46
76.10
42050003000
P W/L Head Assy.
87.45
39.70
42050004095 Lock nut
42021005000 Piston plug
42051007000 Piston 42050013000 Locking coupling standard
42051017000 Adaptor 42050004100 Spindle assy
42041008005 Split Tube - 5' 42051008010 Split Tube - 10' 42050014000 Adaptor coupling
42050004103 Shut-off valve (2)
42050004110 Valve adjusting washer (3)
42050016000 Landing ring
42050003005 Spearhead point
42050004117 Thrust bearing spacer (2) 42050020005 Outer Tube - 5' 42050020010 Outer Tube - 10'
42050004115 Ball thrust bearing (2)
42010004145 Grease fitting
42050003020 Compression spring
42050004120 Spindle bearing with cage
42050009005 Inner Tube - 5'
42050003025 Detent plunger
42050004117 Thrust bearing spacer (2)
42050009010 Inner Tube - 10'
42050003010 Pivot pin (3/4" x 2 1/4")
42050004045 Spearhead base
42050004132 Thrust bearing spacer 42050004130 Compression spring
42050004135 Self lock nut
42050018000 Inner tube stabilizer
42050019000 Thread protector
42051011000 Stop ring 42051012000 Core lifter 42051010000 Core lifter case
42050004131 Spring retaining washer
42050004050 Latch spring
42040004140 Inner tube cap assy
42010004145 Grease fitting
42030004040 Spiral pin (1/2" x 2")
42050004075 Latch body with landing shoulder
42050004055 Latch (2)
42050004065 Latch support
42050004155 Check valve body
B
42030004040 Spring pin (2) (1/2" x 2") 42040004040 Spring pin (1/2" x 2 3/4")
42050004165 "O" ring
42050004150 Steel ball
A
B-24
42050004035 Latch retracting case
42050004085 Landing shoulder
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "KNUCKLE HEAD" SIZE: P W/L Assemblies Group
Part Number
Description
A
42053001005
P W/L Over Shot Assy
B
42053002000
P W/L Cable Swivel Assy
Weight Lbs.
Kgs.
93.15
42.30
4.40
2.00
42053003010 Wire rope thimble (5/16")
42053003015 Eye bolt
42033004200 Jar tube weldment
B 42053003020 Cable swivel collar 42020004115 Ball thrust bearing 42053003030 Nut
42053003300 Self lock nut
42053003035 Cotter pin (1/8" x 1 3/4")
42010004145 Grease fitting
42053003500 Jar staff
42053003200 Cable swivel body
42053004300 Spiral pin (2) (5/16" x 2")
42053003800 Lifting dog spring
42053004100 Lifting dog (2)
42053003900 Lifting dog pivot pin (1" x 3 5/16") 42053004400 Spring pin (1/4" x 3")
42053003400 Locking sleeve
42053003700 Overshot head
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-25
CONVERSION KITS W/L TO W/L 3
Assemblies Weight
Description
Part Number
Lbs.
Kgs.
42021003005
B W/L 3 Conversion Kit Assy 5'
5.74
2.60
42021003010
B W/L 3 Conversion Kit Assy 10'
9.74
4.40
42031003005
N W/L 3 Conversion Kit Assy 5'
9.07
4.10
42031003010
N W/L 3 Conversion Kit Assy 10'
14.07
6.40
42041003005
H W/L 3 Conversion Kit Assy 5'
13.11
5.90
42041003010
H W/L 3 Conversion Kit Assy 10'
18.11
8.20
42051003005
P W/L 3 Conversion Kit Assy 5'
15.01
6.80
42051003010
P W/L 3 Conversion Kit Assy 10'
20.01
9.10
Piston plug Piston plug
Adaptor Adapter
"O" ring "O" ring Piston
Piston
Split tube
5'
Split tube
10'
Stop ring
Core lifter Stop ring
Core lifter
Core lifter case
B-26
Core lifter case
B W/L 3
42021005000
N W/L 3
42021005000
H W/L 3
42021005000
P W/L 3
42021005000
B W/L 3
42021017000
N W/L 3
42031017000
H W/L 3
42041017000
P W/L 3
42051017000
B W/L 3
42021006000
N W/L 3
42031006000
H W/L 3
42041006000
P W/L 3
42051006000
B W/L 3
42021007000
N W/L 3
42031007000
H W/L 3
42041007000
P W/L 3
42051007000
B W/L 3
42021008005
N W/L 3
42031008005
H W/L 3
42041008005
P W/L 3
42051008005
B W/L 3
42021008010
N W/L 3
42031008010
H W/L 3
42041008010
P W/L 3
42051008010
B W/L 3
42021011000
N W/L 3
42031011000
H W/L 3
42041011000
P W/L 3
42051011000
B W/L 3
42021012000
N W/L 3
42031012000
H W/L 3
42041012000
P W/L 3
42051012000
B W/L 3
42021010000
N W/L 3
42031010000
H W/L 3
42041010000
P W/L 3
42051010000
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
CORE LIFTER W/L 3 OPTIONS
BROACHED CORE LIFTER W/L 3 B W/L
42021013000
N W/L
42031013000
H W/L
42041013000
P W/L
42051013000
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
B-27
FLUID CONTROL KIT
BALL
N W/L
H W/L
FLUID CONTROL KIT ASSY
42030020500
42040020500
BALL
42042004190
65100000040
FLUID CONTROL SPRING
42040020501
FLUID CONTROL KIT BOLT
42040020506
JAM NUT
42040020505
FLUID CONTROL SPRING
FLUID CONTROL KIT BOLT
JAM NUT
B-28
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
TABLE OF CONTENTS UNDERGROUND CORE BARREL SECTION
SECTION C
Wireline "Under Ground" Core Barrel & Overshot
C-2
Wireline "Under Ground" Accessories
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
C-10
C-1
WIRE LINE CORE BARREL "UNDER GROUND" SIZE: A W/L-U Assemblies Group A B C
Description
Part Number
Weight Lbs.
Kgs.
42012001005
A W/L-U Core Barrel Assy x 5'
36.35
16.50
42012001010
A W/L-U Core Barrel Assy x 10'
58.00
26.30
42012002005
A W/L-U Inner Tube Assy x 5'
12.09
5.50
42012002010
A W/L-U Inner Tube Assy x 10'
17.09
7.70
42012003000
A W/L-U Head Assy
6.90
3.10
42020004150 Ball 42012013200 Locking coupling standard
42012004195 Ball check spring 42010004095 Lock nut
42012004025 Spearhead
42010004100 Spindle assy
42012015000 Drive coupling
42012004030 Lock nut 42012004036 Pump-in lip seal
42010009005 Inner Tube - 5' 42010016000 Landing ring
42010009010 Inner Tube - 10'
42012004055 "O" ring (2)
42010004105 Shut-off valve (2) 42010020005 Outer Tube - 5' 42010020010 Outer Tube - 10'
42012004045 Spearhead body 42012004075 Bolt hexagon head
42010004110 Valve adjusting washer (2)
42012004135 Washer 42012004140 Guide spring
42010004115 Ball thrust bearing
42012004145 Compression spring
42010004120 Spindle bearing
42012004155 Spring pin (5/16" x 1 1/4")
42010004160 Hanger bearing 42012004150 Latch retracting case
42010004130 Compression spring 42010004135 Self lock nut
42010018000 Inner tube stabilizer
42010019000 Thread protector
42010011000 Stop ring
42010004020 Spring pin (5/16" x 3/4")
42010004145 Grease fitting
42012004175 Latch (2) 42010004140 Inner tube cap assy 42010004065 Latch support
42010004150 Steel ball
42012004185 "O" ring
42010004155 Check valve body
A
C-2
42010004050 Latch spring
42010012000 Core lifter 42010010000 Core lifter case
42012004165 Square pin
B
42010004070 Spring pin (1/4" x 3/4")
42012004160 Latch body
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "UNDER GROUND" SIZE: A W/L-U Assemblies Group
Part Number
A
42014001005
B
42014002000
42013003010 Wire rope thimble (3/16")
Description
Weight Lbs.
Kgs.
A W/L-U Over Shot Assy
4.30
2.00
A W/L-U Cable Swivel Assy
1.00
0.50
42012004030 Lock nut
42012004036 Pump-in lip seal 42013003015 Eye bolt 42014003400 Piston valve (stem)
42014003600 "O" ring
42013003020 Cable swivel collar
B
42020004070 Spring pin (1/4" x 1 1/4")
42013003025 Needle thrust bearing 42013003030 Nut
42014003500 "O" ring
42013003035 Cotter pin (3/32" x 1")
42014003900 Valve spring
42014003005 Cable swivel body 42010004145 Grease fitting
42014003100 Valve cap
42014003800 Spring pin (3/16" x 3/4")
42014004100 Shear pin (5/32" x 1 1/4")
42013003700 Lifting dog spring
42014004100 Shear pin (5/32" x 1 1/4")
42014004150 Lifting dog pivot pin (3/8"x 1 1/4") 42014004000 Valve body (sleeve) 42014004200 Lifting dog (2)
42014004300 Overshot head
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
C-3
WIRE LINE CORE BARREL "UNDER GROUND" SIZE: B W/L-U Assemblies Group A B C
Description
Part Number
Weight Lbs.
Kgs.
42022001005
B W/L-U Core Barrel Assy x 5'
62.70
28.50
42022001010
B W/L-U Core Barrel Assy x 10'
97.20
43.20
42022002005
B W/L-U Inner Tube Assy x 5'
26.33
11.90
42022002010
B W/L-U Inner Tube Assy x 10'
34.83
15.80
42022003000
B W/L-U Head Assy
18.00
8.20
42020004150 Ball 42022013200 Locking coupling standard
42022004025 Spearhead
42012004195 Ball check spring
42022004030 Lock nut
42020004095 Lock nut
42022015000 Drive coupling
42020016000 Landing ring
42022004040 Backup washer (2)
42020004100 Spindle assy
42022004055 "O" ring (2)
42020009005 Inner Tube - 5' 42020009010 Inner Tube - 10'
42022004135 Washer 42022004140 Guide spring
42020004110 Valve adjusting washer (2)
42020020005 Outer Tube - 5' 42020020010 Outer Tube - 10'
42022004145 Compression spring
42020004115 Ball thrust bearing
42020004040 Spring pin (3/8" x 1 5/8")
42020004120 Spindle bearing
42022004150 Latch retracting case
42020004115 Ball thrust bearing 42020004130 Compression spring
42020004050 Latch spring
42020004135 Self lock nut
42020019000 Thread protector
42020011000 Stop ring
42010004145 Grease fitting
42020004065 Latch support
42020004140 Inner tube cap assy 42022004185 "O" ring
42020004155 Check valve body
B
42022004165 Square pin
42020004060 Spiral pin (3/8" x 1 1/4")
42020004070 Spring pin (1/4" x 1 1/4") 42022004161 Upper body 42020004085 Landing shoulder
42020004150 Steel ball
A
C-4
42022004175 Latch (2)
42020012000 Core lifter 42020010000 Core lifter case
42022004045 Spearhead body
42022004075 Bolt hexagon head
42020004105 Shut-off valve (2)
42020018000 Inner tube stabilizer
42022004036 Pump-in lip seal
42022004160 Latch body
42022004163 Lower body
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "UNDER GROUND" SIZE: B W/L-U Assemblies Group
Part Number
A
42024001005
B
42024002000
Description
Weight Lbs.
Kgs.
B W/L-U Over Shot Assy
8.00
3.60
B W/L-U Cable Swivel Assy
1.14
0.50
42024003200 Lock nut
42013003010 Wire rope thimble (3/16") 42022004036 Pump-in lip seal
42022004040 Backup washer (2)
42013003015 Eye bolt 42024003400 Piston valve (stem)
B
42013003020 Cable swivel collar 42022004055 "O" ring (2) 42013003025 Needle thrust bearing 42013003030 Nut
42020004060 Spring pin (3/8" x 1 1/4")
42013003035 Cotter pin (3/32" x 1") 42024003900 Valve spring 42024003005 Cable swivel body
42024004125 Lifting dog spring
42010004145 Grease fitting
42024004150 Lifting dog pivot pin (1/2"x 1 5/8")
42024003100 Valve cap
42024004100 Shear pin (3/16" x 1 11/16")
42024004000 Valve body (sleeve)
42024004200 Lifting dog (2)
42024004300 Overshot head
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
C-5
WIRE LINE CORE BARREL "UNDER GROUND" SIZE: N W/L-U Assemblies Group A B C
Description
Part Number
Kgs.
42032001005
N W/L-U Core Barrel Assy x 5'
95.85
43.50
42032001010
N W/L-U Core Barrel Assy x 10'
143.85
65.30
42032002005
N W/L-U Inner Tube Assy x 5'
40.83
18.60
42032002010
N W/L-U Inner Tube Assy x 10'
53.83
24.40
42032003000
N W/L-U Head Assy
28.25
12.80
42032013200 Locking coupling standard
42032004025 Spearhead
42032004190 Ball
42032004030 Lock nut
42032004195 Ball check spring 42030004095 Lock nut 42032015000 Drive coupling
42030016000 Landing ring
Weight Lbs.
42032004040 Backup washer (2)
42032004036 Pump-in lip seal
42030004100 Spindle assy 42032004055 "O" ring (2)
42030009005 Inner Tube - 5' 42030009010 Inner Tube - 10'
42032004045 Spearhead body
42032004075 Bolt hexagon head 42032004135 Washer
42030004105 Shut-off valve (2)
42030020005 Outer Tube - 5' 42030020010 Outer Tube - 10'
42032004140 Guide spring 42030004110 Valve adjusting washer (2)
42032004145 Compression spring 42030004040 Spring pin (1/2" x 2")
42030004115 Ball thrust bearing 42040004120 Spindle bearing
42032004150 Latch retracting case
42030004160 Hanger bearing 42030004130 Compression spring
42030004050 Latch spring
42030004135 Self lock nut
42030018000 Inner tube stabilizer
42030019000 Thread protector
42030011000 Stop ring
42010004145 Grease fitting
42030004065 Latch support
42030004140 Inner tube cap assy
42030012000 Core lifter 42030010000 Core lifter case
42032004185 "O" ring
42030004155 Check valve body
B
42030004060 Spring pin (1/2" x 1 1/2")
42030004070 Spring pin (1/4" x 1 1/2") 42032004161 Upper body 42030004085 Landing shoulder
42030004150 Steel ball
A
C-6
42032004175 Latch (2)
42032004165 Square pin
42032004160 Latch body
42032004163 Lower body
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "UNDER GROUND" SIZE: N W/L-U Assemblies Group
Part Number
A
42034001005
B
42024002000
Description
Weight Lbs.
Kgs.
N W/L-U Over Shot Assy
9.60
4.40
B W/L-U Cable Swivel Assy
1.14
0.50
42024003200 Lock nut
42013003010 Wire rope thimble (3/16") 42032004036 Pump-in lip seal
42032004040 Backup washer (2)
42013003015 Eye bolt 42034003400 Piston valve (stem)
B
42013003020 Cable swivel collar 42022004055 "O" ring (2) 42013003025 Needle thrust bearing 42013003030 Nut
42020004060 Spring pin (3/8" x 1 1/4")
42013003035 Cotter pin (3/32" x 1") 42024003900 Valve spring 42024003005 Cable swivel body
42024004125 Lifting dog spring
42010004145 Grease fitting
42034004150 Lifting dog pivot pin (1/2"x 2 1/4")
42024003100 Valve cap
42024004100 Shear pin (3/16" x 1 11/16")
42024004000 Valve body (sleeve)
42024004200 Lifting dog (2)
42034004300 Overshot head
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
C-7
WIRE LINE CORE BARREL "UNDER GROUND" SIZE: H W/L-U Assemblies Group A B C
Description
Part Number
Weight Lbs.
Kgs.
42042001005
H W/L-U Core Barrel Assy x 5'
157.85
71.70
42042001010
H W/L-U Core Barrel Assy x 10'
227.85
103.50
42042002005
H W/L-U Inner Tube Assy x 5'
77.30
35.10
42042002010
H W/L-U Inner Tube Assy x 10'
95.30
43.30
42042003000
H W/L-U Head Assy
58.20
26.40
4204200419 0 Ball 42042013200 Locking coupling standard
42042004025 Spearhead
42042004195 Ball check spring
42042004030 Lock nut
42040004095 Lock nut
42042015000 Drive coupling
42040016000 Landing ring
42042004040 Backup washer (2)
42040004100 Spindle assy
42042004055 "O" ring (2)
42040009005 Inner Tube - 5' 42040009010 Inner Tube - 10'
42032004135 Washer 42040004110 Valve adjusting washer (2)
42032004140 Guide spring 42032004145 Compression spring
42040004115 Ball thrust bearing (2)
42040020005 Outer Tube - 5' 42040020010 Outer Tube - 10'
42040004040 Spring pin (1/2" x 2 3/4")
42040004120 Spindle bearing
42042004150 Latch retracting case
42030004160 Ball thrust bearing 42040004130 Compression spring
42042004170 Latch spring
42040004135 Self lock nut
42040019000 Thread protector
42040011000 Stop ring
42010004145 Grease fitting
42042004180 Latch support
42040004140 Inner tube cap assy 42042004185 "O" ring
42030004155 Check valve body
B
42042004165 Square pin
42030004040 Spring pin (1/2" x 2")
42040004070 Spring pin (3/8" x 2") 42042004161 Upper body 42040004085 Landing shoulder
42030004150 Steel ball
A
C-8
42042004175 Latch (2)
42040012000 Core lifter 42040010000 Core lifter case
42042004045 Spearhead body
42032004075 Bolt hexagon head
42040004105 Shut-off valve (2)
42040018000 Inner tube stabilizer
42042004036 Pump-in lip seal
42042004160 Latch body
42042004163 Lower body
C
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRE LINE OVER SHOT "UNDER GROUND" SIZE: H W/L-U Assemblies Group
Part Number
A
42044001005
B
42024002000
Description H W/L-U Over Shot Assy B W/L-U Cable Swivel Assy
Weight Lbs.
Kgs.
13.50
6.10
1.14
0.50
42044003200 Lock nut
42013003010 Wire rope thimble (3/16") 42042004036 Pump-in lip seal
42042004040 Backup washer (2)
42013003015 Eye bolt 42044003400 Piston valve (stem)
B
42013003020 Cable swivel collar 42032004185 "O" ring (2) 42013003025 Needle thrust bearing 42013003030 Nut
42044004500 Spring pin (3/8" x 2")
42013003035 Cotter pin (3/32" x 1") 42044003900 Valve spring
42023003800 Lifting dog spring
42024003005 Cable swivel body
42044004150 Lifting dog pivot pin (1/2"x 2 21/64")
42010004145 Grease fitting
42024003100 Valve cap
42044004100 Shear pin (3/16" x 1 15/16")
42044004000 Valve body (sleeve)
42044004300 Overshot head 42044004200 Lifting dog (2) 42044004400 Overshot guide
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
C-9
WIRE LINE OPTIONS
CHROME PLATED INNER TUBE 5' A W/L
42010009105
B W/L
42020009105
N W/L
42030009105
H W/L
42040009105
P W/L
42050009105
10'
C-10
A W/L
42010009110
B W/L
42020009110
N W/L
42030009110
H W/L
42040009110
P W/L
42050009110
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
UNDERGROUND WIRELINE OPTIONS
CARBIDE LOCKING COUPLING
LOCKING COUPLING PLAIN
A W/L
42012013210
A W/L
42012013300
B W/L
42022013210
B W/L
42022013300
N W/L
42032013210
N W/L
42032013300
NM W/L
42035013210
NM W/L
42032013310
H W/L
42042013210
H W/L
42042013300
HM W/L
42045013210
HM W/L
42042013310
P (HW CASING)
42052013210
P (HW CASING)
42052013300
P (HWT BOX)
42052013211
P (HWT BOX)
42052013310
BROACHED CORE LIFTER A W/L
42010012005
B W/L
42020012005
N W/L
42030012005
H W/L
42040012005
P W/L
42050012005
SHUT OFF VALVE SOFT B W/L
42020004106
N W/L
42030004106
H W/L
42040004106
FRONTAL DISCHARGE CORE LIFTER CASE N W/L
42030010005
H W/L
42040010005
P W/L
42050010005
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
C-11
TABLE OF CONTENTS DRILL ROD AND CASING SECTION
SECTION D Standard Drill Rods
D-2
Wireline Drill Rods
D-3
Casing
D-4
HW Casing Advancer
D-5
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
D-1
STANDARD DRILL RODS AND COUPLINGS
Part Number
Description
Length
Weight Lbs.
Kg.
33010100102 33010100105 33010100110
RW RW RW
2' 5' 10'
3.90 9.75 19.50
1.74 4.35 8.70
33010300102 33010300105 33010300110
EW EW EW
2' 5' 10'
6.10 15.25 30.50
2.70 6.75 13.50
33010400102 33010400105 33010400110
AW AW AW
2' 5' 10'
7.78 19.46 38.92
3.54 8.85 17.70
33010500102 33010500105 33010500110
BW BW BW
2' 5' 10'
12.63 31.58 63.15
5.74 14.35 28.70
33010600102 33010600105 33010600110
NW NW NW
2' 5' 10'
11.30 28.25 56.50
5.14 12.85 25.70
33010700102 33010700105 33010700110
HW HW HW
2' 5' 10'
24.56 61.40 122.80
11.16 27.90 55.80
33010100075 33010100150 33010100300
RW RW RW
0.75m 1.50m 3.00m
4.88 9.75 19.50
2.18 4.35 8.70
33010300075 33010300150 33010300300
EW EW EW
0.75m 1.50m 3.00m
7.63 15.25 30.50
3.38 6.75 13.50
33010400075 33010400150 33010400300
AW AW AW
0.75m 1.50m 3.00m
9.73 19.46 38.92
4.43 8.85 17.70
33010500075 33010500150 33010500300
BW BW BW
0.75m 1.50m 3.00m
15.79 31.58 63.15
7.18 14.35 28.70
33010600075 33010600150 33010600300
NW NW NW
0.75m 1.50m 3.00m
14.13 28.25 56.50
6.43 12.85 25.70
33010700075 33010700150 33010700300
HW HW HW
0.75m 1.50m 3.00m
30.70 61.40 122.80
13.95 27.90 55.80
Part Number
Description
33010100100 33010300100 33010400100 33010500100 33010600100 33010700100
RW EW AW BW NW HW
Metric
D-2
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
HEAT TREATED WIRELINE DRILL RODS
Part Number
Description
Length
Weight Lbs.
Kg.
43030400102 43030400105 43030400110
A W/L A W/L A W/L
2' 5' 10'
6.00 15.50 31.30
2.70 20.70 14.20
43030500102 43030500105 43030500110
B W/L B W/L B W/L
2' 5' 10'
8.00 20.00 40.00
3.60 9.10 18.20
43030600102 43030600105 43030600110
N W/L N W/L N W/L
2' 5' 10'
10.50 25.00 51.00
4.80 11.40 23.20
43030606102 43030606105 43030606110
NM W/L NM W/L NM W/L
2' 5' 10'
10.50 25.00 51.00
4.80 11.40 23.20
43030700102 43030700105 43030700110
H W/L H W/L H W/L
2' 5' 10'
15.00 38.00 76.50
6.80 17.30 34.80
43030706102 43030706105 43030706110
HM W/L HM W/L HM W/L
2' 5' 10'
15.00 38.00 77.00
6.80 17.30 35.00
43030804102 43030804105 43030804110
P W/L P W/L P W/L
2' 5' 10'
21.10 54.10 104.60
9.60 24.60 48.00
33010720102 33010720105 33010720110
HWT HWT HWT
2' 5' 10'
23.40 58.50 117.00
10.62 26.55 53.10
43030400075 43030400150 43030400300
A W/L A W/L A W/L
0.75m 1.50m 3.00m
6.00 15.00 30.00
2.70 6.82 13.64
43030500075 43030500150 43030500300
B W/L B W/L B W/L
0.75m 1.50m 3.00m
7.80 19.50 39.00
3.60 8.70 17.70
43030600075 43030600150 43030600300
N W/L N W/L N W/L
0.75m 1.50m 3.00m
10.20 25.50 51.00
4.60 10.90 23.20
43030606075 43030606150 43030606300
NM W/L NM W/L NM W/L
0.75m 1.50m 3.00m
10.20 25.50 51.00
4.60 10.90 23.20
43030700075 43030700150 43030700300
H W/L H W/L H W/L
0.75m 1.50m 3.00m
15.20 38.00 76.00
6.90 17.25 34.50
43030706075 43030706150 43030706300
HM W/L HM W/L HM W/L
0.75m 1.50m 3.00m
15.20 38.00 76.00
6.90 17.25 34.50
43030804075 43030804150 43030804300
P W/L P W/L P W/L
0.75m 1.50m 3.00m
20.92 52.30 104.60
9.60 24.00 48.00
33010720075 33010720150 33010720300
HWT HWT HWT
0.75m 1.50m 3.00m
23.50 58.00 116.00
10.60 26.30 52.60
Metric
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
D-3
FLUSH JOINT CASING
Part Number
Description
Length
Weight Lbs.
Kg.
33040200102 33040200105 33040200110
RW RW RW
2' 5' 10'
3.60 9.00 18.00
1.60 4.00 8.00
33040300102 33040300105 33040300110
EW EW EW
2' 5' 10'
5.60 14.00 28.00
2.60 6.50 13.00
33040400102 33040400105 33040400110
AW AW AW
2' 5' 10'
7.40 18.50 37.00
3.36 8.40 16.80
33040500102 33040500105 33040500110
BW BW BW
2' 5' 10'
14.00 35.00 70.00
6.36 15.90 31.80
33040600102 33040600105 33040600110
NW NW NW
2' 5' 10'
17.20 43.00 86.00
7.82 19.55 39.10
33040700102 33040700105 33040700110
HW HW HW
2' 5' 10'
23.30 58.25 116.50
10.60 26.50 53.00
33040720102 33040720105 33040720110
HWT HWT HWT
2' 5' 10'
23.40 58.50 117.00
10.62 26.55 53.10
33040800102 33040800105 33040800110
PW PW PW
2' 5' 10'
28.80 72.00 144.00
13.10 32.75 65.50
33040805102 33040805105 33040805110
PWT PWT PWT
2' 5' 10'
28.80 72.00 144.00
13.10 32.75 65.50
33040200075 33040200150 33040200300
RW RW RW
0.75m 1.50m 3.00m
4.50 9.00 18.00
2.00 4.00 8.00
33040300075 33040300150 33040300300
EW EW EW
0.75m 1.50m 3.00m
7.00 14.00 28.00
3.25 6.50 13.00
33040400075 33040400150 33040400300
AW AW AW
0.75m 1.50m 3.00m
9.00 18.00 36.00
4.10 8.20 16.40
33040500075 33040500150 33040500300
BW BW BW
0.75m 1.50m 3.00m
17.25 34.50 69.00
7.85 15.70 31.40
33040600075 33040600150 33040600300
NW NW NW
0.75m 1.50m 3.00m
21.25 42.50 85.00
9.65 19.30 38.60
33040700075 33040700150 33040700300
HW HW HW
0.75m 1.50m 3.00m
28.88 57.75 115.50
13.13 26.25 52.50
33040720075 33040720150 33040720300
HWT HWT HWT
0.75m 1.50m 3.00m
29.00 58.00 116.00
13.15 26.30 52.60
33040800075 33040800150 33040800300
PW PW PW
0.75m 1.50m 3.00m
35.75 71.50 143.00
16.25 32.50 65.00
33040805075 33040805150 33040805300
PWT PWT PWT
0.75m 1.50m 3.00m
35.75 71.50 143.00
16.25 32.50 65.00
Metric
D-4
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
HW / HWT CASING ADVANCER
Assembly Group A
Description
Part Number
Weight Lbs.
Kgs.
34020004500
HW Casing Advancer Assy
79.10
35.90
34020004600
HWT Cansing Advancer Assy
79.10
35.90
Spearhead 34020003515
34020003520 Latch clevis 34020003535 Roller pin
34020004511 Spring (2)
34020004513 Latch shoe (2)
34020004512 Latch body
34020004170 Shim set (5)
34020005005 Drive-latch coupling HWT 34020004505 Drive-latch coupling HW 34020004520 Rock Bit Adaptor A Rock Bit 3 7/8 with 2 3/8 Reg.Pin
Diamond Casing Shoe (See page A6)
ASSEMBLY
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
D-5
TABLE OF CONTENTS STANDARD CORE BARRELS SECTION
SECTION E
XRPS Standard Core Barrel
E-2
TT- 46 Core Barrel
E-3
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
E-1
STANDARD CORE BARREL "XRPS"
Assemblies Group
Part Number 30000050101
A
Description XRPS Core Barrel Assy x 1’
Weight Lbs.
Kgs.
2.38
1.08
30000050102
XRPS Core Barrel Assy x 2’
4.20
1.91
30000050103
XRPS Core Barrel Assy x 3’
6.04
2.74
30000050105
XRPS Core Barrel Assy x 5’
9.69
4.40
30000050200 Head
30000050301 Outer Tube - 1’ 30000050302 Outer Tube - 2’
30000050303 Outer Tube - 3’ 30000050305 Outer Tube - 5’
A
E-2
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
CORE BARREL "TT-46”
Assemblies Group
A
B
Weight
Description
Part Number
Lbs.
Kgs.
31000370115
TT-46 Core Barrel Assy x 5’ with 43 mm. D.R. Box
18.40
8.35
31000370120 31000370135
TT-46 Core Barrel Assy x 10’ with 43 mm. D.R. Box TT-46 Core Barrel Assy x 5’ with AWJ D.R. Box
31000370140 31000370145 31000370150
TT-46 Core Barrel Assy x 10’ with AWJ D.R. Box TT-46 Core Barrel Assy x 5’ with AW D.R. Box TT-46 Core Barrel Assy x 10’ with AW D.R. Box
31.30 18.40 31.30
14.20 8.35 14.20
31000370200 31000370201
TT-46 Head Assy with AW D.R. Box TT-46 Head Assy with 43 mm. D.R. Box
18.40 31.30 4.20 4.20
8.35 14.20 1.90 1.90
31000370203
TT-46 Head Assy with AWJ D.R. Box
4.20
1.90 HEAD
Part Number
Head (See chart)
Description
31000370205
AW
31000370206 31000370208
43 mm. AWJ
42010004145 Grease fitting 31000370402 Inner Tube - 2’
31000370255 Nut 31000370213 Thin washer 31000370212 Washer 31000370211 Spacer
31000370403 Inner Tube - 3’ 31000370405 Inner Tube - 5’ 31000370410 Inner Tube - 10’
31000370302 Outer Tube - 2’
31000370245 Radial bearing (2)
31000370303 Outer Tube - 3’ 31000370215 Bearing housing 31000370305 Outer Tube - 5’ 31000370240 Axial bearing
31000370310 Outer Tube - 10’
31000370210 Bearing spacer 31000370245 Radial bearing
31000370400 Inner Tube extension
31000370220 Bearing shaft
31000370500 Core lifter
31000370560 Thread Protector
31000370260 Inner tube coupling
31000370550 Core lifter case
A
B
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
E-3
TABLE OF CONTENTS WATER EQUIPMENT SECTION
SECTION F Compact Water Swivel
F-2
Underground Water Swivel
F-3
Compact Plus Water Swivel
F-4
Universal Water Swivel
F-5
NW Heavy Duty Water Swivel
F-6
Pressure Relief Valve
F-7
Loading Chamber
F-8
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
F-1
COMPACT WATER SWIVEL
Assembly Part Number
Capacity
Weight
Description
44010001000
Compact Water Swivel Assy with AW Rod Box
44010001070
Repair Kit
Rotating
Static
Lbs.
Kgs.
Lbs.
Kgs.
14.50
6.60
500
227
1.75
0.80
Lbs. 5000
Kgs. 2270
(*) Included in the repair kit
Cap 44010001005
Connection thread 1’’ N.P.T. Ball bearing (*) 44010001050
“0” ring (*) 44010001010 Spring washer (*) 44010001015
Grease fitting 42010004145
Body 44010001055
“V” packing set (*) 44010001020
Felt seal (*) 44010001060
Wear sleeve (*) 44010001025
Spindle extenxion AW Rod Box 44010001065
Packing cage 44010001030
Adapter (Optional)
“0” ring (*) 44010001035 “0” ring (*) 44010001045 Spindle 44010001040
ADAPTER SUB Part Number
Description
34030400404
AW Rod pin to AW/L pin AW Rod pin to BW/L pin
34030400504 34030400604 34030400704
AW Rod pin to NW/L pin AW Rod pin to HW/L pin
Another sizes upon request
F-2
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
UNDERGROUND COMPACT WATER SWIVEL
Assembly Capacity Description
Part Number
44010001001
Compact Water Swivel Assy with AW Rod Box
44010001070
Repair Kit
Weight
Rotating
Static
Lbs.
Kgs.
Lbs.
Kgs.
14.50
6.60
500
227
1.75
0.80
Lbs. 5000
Kgs. 2270
(*) Included in the repair kit
Connection thread 1’’ N.P.T.
Cap 44010001006 Ball bearing (*) 44010001050
“0” ring (*) 44010001010 Body 44010001055
Spring washer (*) 44010001015
Grease fitting 42010004145 “V” packing set (*) 44010001020
Wear sleeve (*) 44010001025
Felt seal (*) 44010001060
Spindle extenxion AW Rod Box 44010001065
Adapter (Optional)
Packing cage 44010001030
“0” ring (*) 44010001035 ADAPTER SUB
“0” ring (*) 44010001045
Spindle 44010001040
Part Number
Description
34030400404
AW Rod pin to AW/L pin AW Rod pin to BW/L pin
34030400504 34030400604 34030400704
AW Rod pin to NW/L pin AW Rod pin to HW/L pin
Another sizes upon request
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
F-3
COMPACT PLUS WATER SWIVEL
Assembly Part Number
44010001500 44010001570
Capacity
Weight
Description
Rotating
Static
Lbs.
Kgs.
Lbs.
Kgs.
Compact Water Swivel Assy with AW Rod Box
16.7
7.6
10000
4540
Repair Kit
1.92
0.87
Lbs. 20000
Kgs. 9000
(*) Included in the repair kit
Cap 44010001005
“0” ring (*) 44010001035 Spindle 44010001550 Connection thread 1’’ N.P.T. “0” ring (*) 44010001045
“0” ring (*) 44010001010
Thrust bearing (*) 44010001560
Spring washer (*) 44010001015
Lower body 44010001565
“V” packing set (*) 44010001020 Grease fitting 42010004145
Wear sleeve (*) 44010001025
Packing cage 44010001030
Felt seal (*) 44010001060
Spindle extenxion AW Rod Box 44010001065
Ball bearing(*) 44010001050
ADAPTER SUB
Adapter (Optional) Upper body 44010001540
Part Number
Description
34030400404
AW Rod pin to AW/L pin AW Rod pin to BW/L pin
34030400504 34030400604 34030400704
AW Rod pin to NW/L pin AW Rod pin to HW/L pin
Another sizes upon request
F-4
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
UNIVERSAL WATER SWIVEL
Assembly Part Number
Description
Capacity
Weight
Rotating
Static
Lbs.
Kgs.
Lbs.
Kgs.
11000
5000
44010002000
Universal Water Swivel Assy with 5W Rod Box
31.5
14.3
44010002075
Universal Water Swivel Repair Kit
3.74
1.7
Lbs. 25000
Kgs. 11400
(*) Included in the repair kit
Retaining ring (*) 44010002045
Cap 44010002005
Ball bearing (*) 44010002050
Connection thread 1 1/4’’ N.P.T.
Spindle extension (*) 44010002055
Compression spring 44010002010
Spindle 44010002060
“V” packing set (*) 44010002015
Bearing ball thrust (*) 44010002065
“0” ring (*) 44010002020
Body 44010002070
Packing housing 44010002025 Grease fitting 42010004145 Spindle nut 44010002030
Locking washer (*) 44010002035
Adapter (Optional) ADAPTER SUB 34030500504
Spacer 44010002040
34030500604 34030500704
BW Rod pin to BW/L pin BW Rod pin to NW/L pin BW Rod pin to HW/L pin
Another sizes upon request
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
F-5
NW HEAVY DUTY WATER SWIVEL
Assembly Part Number
34010001001
Description
NW Heavy Duty Water Swivel Assy with NW Rod Box
Street elbow 34010001080
Gland socket cap screw (4) 34010001085
ASSEMBLY
Weight Lbs. 54.63
Kgs. 24.80
Capacity Rotating Lbs. 12000
Static
Kgs.
Kgs. Lbs. 5450 30000 13620
Upper body ball bearing 34010001055
Stem W / NW Coupling 34010001035
Upper packing gland 34010001005 Stem thrust bearing 34010001050
Oring 34010001090
Lower body 34010001030
“V” packing set 34010001015
Lower body seal 34010001065
Grease fitting 34010001070
Retaining ring 34010001095 Body socket cap screw (8) 34010001020 Upper body with bail 34010001010
Lower packing gland 34010001025 Packing gland seal 34010001060
F-6
Adapter (Optional)
ADAPTER SUB NW Rod pin to BW/L pin NW Rod pin to NW/L pin NW Rod pin to HW/L pin
34030600504 34030600604 34030600704
Another sizes upon request
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
PRESSURE RELIEF VALVE
Assembly Part Number
Description
44011000000
Relief Valve Assy
Weight Lbs.
Kgs.
7.50
3.4
Adjusting screw 44011000010
Lock nut 44011000020
Body 44011000080
Connection thread 3/4’’ N.P.T.
Spring guide heavy duty 44011000070
Spring 44011000030
Ball holder heavy duty 44011000060 Steel ball (15/16’’) 65000000040
Special seat 44011000050
Connection thread 1’’ N.P.T.
ASSEMBLY
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
F-7
LOADING CHAMBER
Assembly Weight
Description
Part Number
Lbs.
Kgs.
44016001000
A W/L Loading Chamber Assy (3/16”)
6.00
2.80
44016001001
5.95
2.70
44036001000
A W/L Loading Chamber Assy (1/4”) B W/L Loading Chamber Assy (3/16”)
7.00
3.20
44036001001
B W/L Loading Chamber Assy (1/4”)
6.85
3.10
44026001000
N W/L Loading Chamber Assy (3/16”)
8.35
3.80
44026001001
N W/L Loading Chamber Assy (1/4”)
8.10
3.65
44046001000
H W/L Loading Chamber Assy (3/16”)
44046001001
H W/L Loading Chamber Assy (1/4”)
13.00 12.70
6.00 5.80
Another sizes upon request
Packing Plug(3/16”) 44026001050 Packing Plug(1/4”) 44026001051
Cable Guide(3/16”) Washer (2) 44026001040 Cable Packing(3/16”) 44026001030 Cable Guide Washer (1/4”)(2) 44026001041
Cable Packing(1/4”) 44038002020
Loading Chamber Body (See Chart) Quick Coupler Tip 1’’ NPT 44026001020
Loading Chamber Body
Quick Delach Female (Optional) 44026001025
Part Number
Description
44016001010
AW/L Loading Chamber Body
44036001020 44026001010 44046001030
NW/L Loading Chamber Body HW/L Loading Chamber Body
BW/L Loading Chamber Body
Another sizes upon request
F-8
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
TABLE OF CONTENTS RECOVERY TOOLS SECTION
SECTION G Wireline Rod Tap
G-2
Wireline Rod Right Hand Full Grip Tap
G-3
Casing Tap
G-4
Casing and Drill Rod Tap
G-5
Standard Rod and Coupling Tap
G-6
Casing and Rod Cutter
G-7
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
G-1
WIRELINE ROD TAP
Rod Size A W/L B W/L N W/L H W/L P W/L BTW NTW
Rod Size A W/L B W/L N W/L H W/L P W/L BTW NTW
G-2
RIGHT HAND TAP Connection Part Number A W/L B W/L N W/L H W/L P W/L BTW NTW
34045014010 34045011019 34045011020 34045011021 34045011022 34045016604 34045016605
Weight Lbs. 2.69 4.7 7.5 12.3 17.4 4.94 8.28
LEFT HAND TAP Connection Part Number A W/L B W/L N W/L H W/L P W/L BTW NTW
34045014005 34045011026 34045015505 34045011028 34045011029 34045016606 34045016607
Kgs. 1.2 1.9 3.4 5.6 7.9 2.3 3.8
Weight Lbs. 2.69 4.7 7.5 12.3 4.4 4.94 8.28
Kgs. 1.2 1.9 3.4 5.6 7.9 2.3 3.8
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRELINE ROD FULL GRIP TAP
RIGHT HAND TAP Tap Size B W/L N W/L H W/L
Tap Size B W/L N W/L H W/L
Connection (Right Hand) AW BW BW
Connection (Left Hand) AW BW BW
Part Number 34045015006 34045016006 34045017006
Lbs. 6.31 11.16 17.55
Weight Kgs. 2.9 5.1 7.9
Lbs. 6.31 11.16 17.55
Weight Kgs. 2.9 5.1 7.9
LEFT HAND TAP Part Number 34045015007 34045016007 34045017007
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
G-3
CASING TAP
Rod Size (Casing) EW AW BW NW HW
RIGHT HAND TAP Connection Rod Box Part Number
Weight Lbs. Kgs. 3.01 1.8 5.40 2.5 8.50 3.9 11.25 5.1 21.65 9.8
EW AW BW NW HW
34045011002 34045011003 34045011004 34045011005 34045012005
AW BW NW HW PW
A W/L B W/L N W/L H W/L P W/L
34045014001 34045015001
Rod Size (Casing) EW AW BW NW HW
Connection Rod Box
Part Number
EW AW BW NW HW
34045013505 34045014505 34045015507 34045016505 34045017505
Weight Lbs. Kgs. 3.01 1.8 5.40 2.5 8.50 3.9 11.25 5.1 21.65 9.8
AW BW NW HW PW
A W/L B W/L N W/L H W/L P W/L
34045014502 34045015502 34045016502 34045017502 34045018502
6.10 8.15 11.5 22.95 29.80
34045016001 34045017002
34045018002
6.10 8.15 11.5 22.95 29.80
2.7 3.7 5.2 10.4 13.5
LEFT HAND TAP
G-4
2.7 3.7 5.2 10.4 13.5
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
CASING AND DRILL ROD TAP
Tap Size (Casing) AW - B W/L BW - N W/L NW - H W/L HW PW
Tap Size (Casing) AW - B W/L BW - N W/L NW - H W/L HW PW
RIGHT HAND TAP Connection Box Part Number AW NW NW NW NW
34045014004 34045015003 34045016002 34045017001 34045018500
Weight Lbs. 9.00 10.37 18.02 38.33
LEFT HAND TAP Connection Box Part Number AW NW NW NW NW
34045014001 34045015503 34045016002 34045017501 34045018501
Kgs. 4.09 4.71 8.18 17.40
Weight Lbs. 9.00 10.37 18.02 38.33
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
Kgs. 4.09 4.71 8.18 17.40
G-5
STANDARD ROD AND COUPLING TAP
Tap Box Size EW AW BW NW
Tap Box Size EW AW BW NW
G-6
RIGHT HAND TAP Connection Part Number (Right Hand) 34045014101 EW 34045014102 AW 34045014103 BW 34045014104 NW
Lbs. 1.3 2.19 3.89 6.3
LEFT HAND TAP Connection Part Number (Right Hand) EW 34045014110 AW 34045014112 BW 34045014114 NW 34045014113
Lbs. 1.3 2.19 3.89 6.3
Weight Kgs. 0.6 0.9 1.7 2.9
Weight Kgs. 0.6 0.9 1.7 2.9
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
CASING AND ROD CUTTER
Group
Description
AW Casing /B W/L 34035002100 34035002120 34035002155 32030082030 34035002125 34035002140 34035002115 34035002135 (2) 34035002105 (2) 34035002145 34035002130 34035002110
Piston Housing Ball Roll Pin Piston Spring Jaw Holder Jaw Pin Jaw Set Cap Screw Ball Release Rod Pilot
A
BW Casing / N-W/L 34035003100 34035003120 34035002155 34035003160 34035003125 34035003140 34035003115 34035003135 (2) 34035003105 (2) 34035003145 34035003130 34035003110
NW Casing / H W/L 34035004100 34035004120 42020004150 34035004160 34035004125 34035004140 34035004115 34035004135 (3) 34035004105 (3) 34035004150 34035004130 34035004110
HW Casing / HW W/L 34035006100 34035006100 34035004120 34035004160 34035004125 34035004140 34035004115 34035004135 (3) 34035005105 (3) 34035004150 34035004130 34035006105
Piston housing with box thread
Ball
Roll pin Piston Ball release rod
Spring
Jaw holder
Jaw pin Pilot
Jaw set
ASSEMBLY
Cap screw
A
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
G-7
TABLE OF CONTENTS HOISTING TOOLS SECTION
SECTION H AW Hoisting Plug
H-2
NW Hoisting Plug
H-3
Wireline Cable
H-4
Wireline Cable Accessories
H-5
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
H-1
AW HOISTING PLUG 10100 lb Assembly Weight
Part Number
Description
34015001000
AW Hosting plug Assy complete
Lbs.
Kgs.
10.50
4.80
Swivel eye 34015001005
Head W/ bushing 34015001015
Bearing 34015001020 Support washer 34015001025 Lock nut 34015001030 Cotter pin 42013003035
Body AW box thread 34015001010
ADAPTER SUB
Adapter (Optional) (See chart)
AW Rod pin to AW/L pin
34030400404
AW Rod pin to BW/L pin AW Rod pin to NW/L pin
34030400504 34030400604 34030400704 34030400707
AW Rod pin to HW/L pin AW Rod pin to HWT Casing pin AW Rod pin to HW Casing pin Another sizes upon request
H-2
34030400711
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
NW HOISTING PLUG 21500lb Assembly Part Number
Description
34015002000
NW Hosting plug Assy
Weight Lbs.
Kgs.
16.70
7.60
Swivel eye 34015002005
Upper bearing 34015002025
Head 34015002015
Lower bearing 34015002030 Bearing washer support 34015002020 Lock nut 34015002035 Cotter pin 34015002040
Body NW box thread 34015002010
ADAPTER SUB
Adapter (Optional) (See chart)
NW Rod pin to BW/L pin
34030600504
NW Rod pin to NW/L pin NW Rod pin to HW/L pin
34030600604 34030600704 34030600707 34030600711
NW Rod pin to HWT Casing pin NW Rod pin to HW Casing pin Another sizes upon request
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
H-3
WIRE LINE CABLE
Part Number Aircraft cable 7x19
Aircraft cable 19x7
H-4
Description
45050010500
Cable 3/16’’ (Rollo x 500 mts)
45050011000 45050020500 45050021000
Cable 3/16’’ (Rollo x 1000 mts) Cable 1/4’’ (Rollo x 500 mts) Cable 1/4’’ (Rollo x 1000 mts)
Part Number
Description
45050030000
Cable ½’’
45050040000
Cable 5/8’’
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
WIRELINE CABLE ACCESSORIES
Part Number
Description
44039000010
Oval sleeve tool 3/16’’
44039000050
Oval sleeve tool 1/4’’
Oval sleeve tool
Part Number
Description
44039000020
Oval sleeve 1/4’’
44039000030
Oval sleeve 3/16’’
Oval sleeve
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
H-5
TABLE OF CONTENTS MISCELLANEOUS
SECTION I Inner Tube Clinometer
I-2
Running Type Clinometer
I-3
Straight Pipe Wrench
I-4
Full Grip Wrench
I-5
Jaws
I-6
Chuck Jaws
I-7
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
I-1
INNER TUBE CLINOMETER
Assembly Part Number
Description
34047002005
Weight Lbs.
Kgs.
A W/L Inner Tube Clinometer Assy
0.70
0.30
34047003005
B W/L Inner Tube Clinometer Assy
2.10
0.90
34047004005
N W/L Inner Tube Clinometer Assy
4.19
1.90
34047005005
H W/L Inner Tube Clinometer Assy
6.33
2.90
Container
“0” ring
Test tube
Rubber Stopper
Part Number
Description
34047002010 34047003010 34047004010 34047005010
A W/L Cap B W/L Cap N W/L Cap H W/L Cap
34047002015 34047004015
A - B W/L Rubber Stopper N - H W/L Rubber Stopper
34047002020 34047004020
A - B W/L Test Tube N - H W/L Test Tube
34047002025 34047003025
A W/L “Oring” B W/L “Oring” N - H W/L“Oring”
34047004025
Cap 34047002030 34047003030 34047004030
I-2
A W/L Container B W/L Container N - H W/L Container
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
RUNNING TYPE CLINOMETER
Assembly Part Number
Weight
Description
Lbs.
Kgs.
34047002006
AQ Running Type Clinometer Assy
1.00
0.40
34047003006
BQ Running Type Clinometer Assy
2.20
1.00
34047004006
NQ Running Type Clinometer Assy
5.83
2.60
34047005006
HQ Running Type Clinometer Assy
8.33
3.80
Cap
Rubber Stopper
Test tube
“0” ring
Container
Part Number
Description
34047002011 34047003011 34047004011 34047004011
A W/L Cap B W/L Cap N W/L Cap H W/L Cap
34047002015 34047004015
A - B W/L Rubber Stopper N - H W/L Rubber Stopper
34047002020 34047004020
A - B W/L Test Tube N - H W/L Test Tube
34047002025 34047003025
A W/L “Oring” B W/L “Oring” N - H W/L “Oring”
34047004027 34047002030 34047003030 34047004035
A W/L Container B W/L Container N - H W/L Container
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
I-3
STRAIGHT PIPE WRENCH
Assembly Lbs.
Kgs.
45010001006
Straight Pipe Wrench x 6’’
0.44
0.20
45010001008
Straight Pipe Wrench x 8’’
0.81
0.37
45010001010
Straight Pipe Wrench x 10’’
1.76
0.80
45010001012
Straight Pipe Wrench x 12’’
2.60
1.18
45010001014
Straight Pipe Wrench x 14’’
3.63
1.65
45010001018
Straight Pipe Wrench x 18’’
5.79
2.63
45010001024
Straight Pipe Wrench x 24’’
45010001036
Straight Pipe Wrench x 36’’
9.36 18.68
4.25 8.48
45010001048
Straight Pipe Wrench x 48’’
30.79
13.98
45010001060
Straight Pipe Wrench x 60’
45.37
20.60
Size Hook Jaw
6’’
Part Number 45010002006 45010003006 45010004006 45010005006
Description Wrench Nut Heel Jaw & Pin Coil & Flat Spring Hook Jaw
8’’
45010002008 45010003008 45010004008 45010005008
Wrench Nut Heel Jaw & Pin Coil & Flat Spring Hook Jaw
10’’
45010002010 45010003010 45010004010 45010005010
Wrench Nut Heel Jaw & Pin Coil & Flat Spring Hook Jaw
12’’
45010002012 45010003012 45010004012 45010005012
Wrench Nut Heel Jaw & Pin Coil & Flat Spring Hook Jaw
14’’
45010002014 45010003012 45010004014 45010005014
Wrench Nut Heel Jaw & Pin Coil & Flat Spring Hook Jaw
18’’
45010002018 45010003018 45010004018 45010005018
Wrench Nut Heel Jaw & Pin Coil & Flat Spring Hook Jaw
24’’
45010002024 45010003024 45010004024 45010005024
Wrench Nut Heel Jaw & Pin Coil & Flat Spring Hook Jaw
36’’
45010002036 45010003036 45010004036 45010005036
Wrench Nut Heel Jaw & Pin Coil & Flat Spring Hook Jaw
48’’
45010002048 45010003048 45010004048 45010005048
Wrench Nut Heel Jaw & Pin Coil & Flat Spring Hook Jaw
60’’
45010002060 45010003060 45010004060 45010005060
Wrench Nut Heel Jaw & Pin Coil & Flat Spring Hook Jaw
Heel Jaw & Pin
Coil & Flat Spring
Wrench Nut
I-4
Weight
Description
Part Number
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
FULL GRIP WRENCH
INNER TUBE Part Number
Description
Weight Lbs.
Kgs. 1.95
44037000110
A W/L Inner Tube Wrench
4.30
44037000120
B W/L Inner Tube Wrench
4.65
2.12
44037000130
N W/L Inner Tube Wrench
7.85
3.56
44037000140
P W/L Inner Tube Wrench
9.20
4.18
OUTER TUBE Part Number
Description
Weight Lbs.
Kgs.
44037000010
A W/L Outer Tube Wrench
4.70
2.15
44037000020
B W/L Outer Tube Wrench
4.30
1.96
44037000030
N W/L Outer Tube Wrench / H Inner tube Wrench
8.60
3.90
44037000040
H W/L Outer Tube Wrench
9.30
4.24
44037000045
P W/L Outer Tube Wrench
10.50
4.78
DRILL RODS Part Number
Description
Weight Lbs.
Kgs.
44037000013
A W/L Drill Rods Wrench
4.70
2.15
44037000023
B W/L Drill Rods Wrench
4.30
1.96
44037000033
N W/L Drill Rods Wrench
8.60
3.90
44037000043
H W/L Drill Rods Wrench
9.30
4.24
44037000053
P W/L Drill Rods Wrench
10.50
4.78
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
I-5
JAWS
Assembly Part Number
Description
Weight Lbs.
Kgs.
34040001145
A W/L JAW RC60
23.46
10.65
34040001155
B W/L JAW RC60
23.02
10.45
34040001165
N W/L JAW RC60
21.04
9.55
34040001170
H W/L JAW RC60
17.78
8.07
34040001171
HW Casing JAW RC60
12.27
5.57
1003600009A Insert Chuck Jaw
I-6
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
CHUCK JAWS
Assembly Part Number
Description
Weight Lbs.
Kgs. 2.2
61082255325
Chuck Jaw AW / AXWL / AWL
4.75
61082255326
Chuck Jaw BX / AW Casing
4.27
1.9
61082255330
Chuck Jaw BW / L
3.68
1.7
61082255333
Chuck Jaw NX / BW Casing
12.80
5.80
61082255334
Chuck Jaw NW / L
13.10
5.94
Chuck Jaw HW / L
11.10
5.05
61082255337
1003600009A Insert Chuck Jaw
Copyright © 2006 Diamantina Christensen. All rights reserved. No part of this catalogue may be produced, by any means, without the prior written permission.
I-7