Loading documents preview...
LCT-APT NPT-1200 NE Configuration
Global Services Division ECI Training Department 1.23
LCT-APT NPT-1200 Configuration
Content
2.23
LCT – Main window Operation mode Basic Attributes Timing IP Setting Slot Assignment Port configuration example DCC XC LCT License
LCT-APT NPT-1200 Configuration
Preparing the PC … Set the IP Address In the PC Internet Protocol (TCP/IP) properties : Change the IP Address to match your element's Ethernet IP address
3.23
LCT-APT NPT-1200 Configuration
Getting Started… Double click the LCT icon The window below opens
4.23
Insert the NE Ethernet IP Insert the password Ping first to check connectivity Press OK LCT-APT NPT-1200 Configuration
LCT – Main Window Menu Bar
Working Modes
Objects Tree 5.23
Working Area is divided by Tabs – each tab represents the relevant information according to the working mode that is chosen LCT-APT NPT-1200 Configuration
Operation Mode By default the LCT mode is in Monitor mode
In the main window, go to Advance -> Request to log in as Master 6.23
LCT-APT NPT-1200 Configuration
Basic Attributes 2
1. 2. 3.
Select the NPT icon Go to “NE Setting” tab Press the refresh button
4.
Give the NE Name/Location etc.
1
7.23
LCT-APT NPT-1200 Configuration
NE Time of Day 1.
Press the refresh button
2.
Press on the calendar icon to set the date for today Apply
3.
8.23
LCT-APT NPT-1200 Configuration
IP Setting
In this window we can change the NE connection mode and set the ip
9.23
LCT-APT NPT-1200 Configuration
Slot Assignment
10.23
LCT-APT NPT-1200 Configuration
Reassignment Reassignment is changing the expected equipment type to a new but compatible type, logically in a slot
11.23
LCT-APT NPT-1200 Configuration
Slot Assignment
Get Logical Card – view the logically assigned cards (expected) Get Physical Card – view the actual cards Set As Logical- automatically assign the physical cards
12.23
LCT-APT NPT-1200 Configuration
Timing Configuration 2
1.
2. 3. 1
Expand the Control and Physical object and select the TMU option Select the Timing Setting tab Remove the v from the internal timing checkbox
3
4. Set the priority for the clock reference 13.23
LCT-APT NPT-1200 Configuration
Timing Configuration
14.23
LCT-APT NPT-1200 Configuration
Card Configuration Example
2
1
J0 pattern
15.23
C2 Signal Labe LCT-APT NPT-1200 Configuration
Port Configuration Example 1. Expand the optical module and click on the optical port 2. in the configuration mode go to the rate setting tab & change the rate if needed, press on “Apply” 3
1
16.23
3. Set the SFP type and the application code according the used SFP
2
LCT-APT NPT-1200 Configuration
DCC Cross Connects 2 3 1
1. 2. 3.
Select the element Select “Services” as the work mode Go to the “DCC XC List” tab and click on the Upload icon
for uploading the XC to the LCT DB
17.23
LCT-APT NPT-1200 Configuration
DCC Cross Connects Click on the Upload button to view the XC
Overwrite – update the DB according the uploaded XCs from the element
18.23
LCT-APT NPT-1200 Configuration
DCC Cross Connects
1
2
3
1. 2. 3. 19.23
Select the optical port for the requested DCC XC Under the MCP card, select the COM port Active XC LCT-APT NPT-1200 Configuration
DCC XC List
20.23
LCT-APT NPT-1200 Configuration
License Upgrade When the 180 days trial of the LCT license expires - the following message appears when you try to connect Connection to the EMS server is required
1
21.23
LCT-APT NPT-1200 Configuration
License Upgrade Set the connection to the EMS server: 2
Server IP – the IP address of the EMS server Port – logical port to use for delivering the license
3
4 22.23
LCT-APT NPT-1200 Configuration
Summary
23.23
LCT – Main window Operation mode Basic Attributes Timing IP Setting Slot Assignment DCC XC LCT License
LCT-APT NPT-1200 Configuration