Npt-1200_r1-notes (28)

NPT-1200 v.2 Internal – Not for distribution Global Services Division ECI Training Department 1.28

NPT 1200 V.2

Content     

2.28

Main Features Product Layout Common Modules Matrixes I/O Modules

NPT 1200 V.2

NPT-1200 Main features  2U, front access connectors  100Gb/s packet capacity and 70 Gb/s packet throughput  40 Gb/s TDM matrix  From 64Kbps up to 10 Gbps (STM-64 and n x10GE)  CES and native TDM support  Built in Power over Ethernet support (PoE+)  EXT-2U – 2U Expansion unit for additional 3 traffic IO cards ■ SNCP, MSP 1+1, MS-SPRing ■ Full interoperability with XDM and BG equipment and management ■ Inherits all BG-64 functionalities ■ Shares the BG-64 I/O cards

3.28

NPT 1200 V.2

The NPT-1200 Product Layout

4.28

NPT 1200 V.2

Common Cards

 INF-1200 550W  DC power feed with input filtering  Supports hot insertion and redundancy (2 x INF-64)

 FCU-1200  Pluggable fan control unit  8 independent fans  3 speed modes controlled by MCP according to temperature and fan failure 5.28

NPT 1200 V.2

Common Cards  MCP1200  Main control card  One MCP1200 card with a dedicated slot  Fast Ethernet management/LCT connection  Uses 1G CF type replaceable NVM  External synchronization interface(T3/T4)  Auxiliary connector (SCSI 36) for the ICP_MCP1200 connection panel : V.11, Alarms Out, OW, Debug  32 RS ports, 32 MS ports and 2 DCC clear channel

6.28

NPT 1200 V.2

Matrixes The NPT-1200 can operate with different matrix cards: CPTS100: matrix card that provides native TDM cross connect and native packet switching. XIO64: TDM matrix card that provides TDM only cross connect. Supports STM-64 aggregation through a single XFP port. XIO16_4: TDM matrix card that provides TDM only cross connect. Supports STM-16 aggregation through four SFP ports. 7.28

NPT 1200 V.2

CPTS - Centralized Packet and TDM Switch

TDM & Packet Fully 40G low/high order TDM with 2 x STM-16 or one STM-64 port & Central 100G Packet switching with 2 x 10GE

8.28

NPT 1200 V.2

Packet vs. TDM

Packet

STM16/64

TDM

 Native Eth./MPLS-TP  EoS / MoT NPT

E1 ETH

NPT

NPT

NPT

NPT

TDM GigE/10GigE Fiber

 Native TDM  CES

9.28

Ethernet

NPT 1200 V.2

Packet vs. TDM

Ethernet CES

Ethernet

MPLS-TP/ Eth. Packet Switch

TDM Matrix TDM

10.28

TDM EoS

Packet

TDM

From 10 MbPs to 10 Gbps I/F

From E1 to STM-64 I/F

MPLT-TP/Ethernet switch

HO/LO matrix

Packet synchronization

EoS

Circuit emulation (CES)

MPLSoS

NPT 1200 V.2

CPTS 100 A new Centralized hybrid matrix for supporting any-toany data cards connectivity in addition to the TDM switching capacity

Centralized Packet and TDM Switch (CPTS)

enables the option for any-to-any data cards connectivity in addition to the 40G TDM switching capacity

TDM

TDM Matrix

TDM

Packet

Packet Packet Switch Packet

Native Packet Native TDM 11.28

Packet

CES EoS NPT 1200 V.2

NPT-1200 – 100G Architecture OHA AUX TMN LS LCT EMS G.703 V.11

NPT-1200

EXT-2U Controller

2.5G/8G Tslot 1#

CPTS100 2.5G/8G

Tslot 2#

40G TDM Matrix

2.5G/8G Tslot 3#

Tslot 4#

622M/2 x GE Eslot 1#

622M/2 x GE

2.5G/8G

Eslot 2#

100G/70G Packet Switch

2.5G Tslot 5# 2.5G/8G

622M/2 x GE Eslot 3#

Tslot 6#

Tslot 7#

2.5G/8G

Synchronization

2 Mbps

12.28

STN-n SDH

E1

1588 V2

NPT 1200 V.2

TDM based Matrix  XIO64  Redundant matrix and TMU  STM-64 XFP housing  Capacity of 256*VC4 with VC4/VC3/VC12 granularity

13.28

NPT 1200 V.2

TDM based Matrix  XIO16_4  Redundant matrix and TMU  Four STM1/4/16 independently configured aggregate ports  Capacity of 256*VC4 with VC4/VC3/VC12 granularity

14.28

NPT 1200 V.2

The NPT-1200 - BW Allocation

ES3 INF – E2U

622M / 2 x GEs FCU-E2U

ES2

2U

622M / 2 x GEs INF - E2U

EXT-2U

FCU-50

ES1

622M / 2 x GEs TS5 INF-1200

2.5G

TS6

2.5G/8GE

CPTS100

2U

TS3

2 x 10GE + 2 x STM-16 or 1 x STM-64

2.5G/8GE

TS1

2.5G/8GE

465mm

NPT-1200

2.5G/8GE

CPTS100

MCP1200

15.28

2.5G/8GE TS4

2 x 10GE + 2 x STM-16 or 1 x STM-64 INF-1200

TS7

FCU1200

FCU-50

TS2

2.5G/8GE

243mm NPT 1200 V.2

Tslot Modules - PDH PME1_21

• 21 balanced E1s • Unbalanced mode is supported via an xDDF-21 converter

PM345_3

3 E3/DS3 ports, configurable independently

PME1_63

• 63 balanced E1s 16.28

NPT 1200 V.2

Tslot Modules – SDH SMQ1&4

SMQ1

Quad STM1/4, SFP based

Quad STM1o/e, SFP based

SMS16

17.28

Single STM416 I/O, SFP based NPT 1200 V.2

Tslot Modules – DATA – Layer 1 DMFX_4_L1

DMFE_4_L1

Quad FE L1 Ethernet card

Quad FX L1 Ethernet card

DMGE_4_L1

Quad GE L1 Ethernet card 18.28

NPT 1200 V.2

DATA Cards – Layer 1 Card

Type

LAN EoS WAN Interface Interface

DMFE_4_L1

10/100BaseT

4

4 (Up to 4xVC4)

DMFX_4_L1

Optical Fast Ethernet (SFP)

4

4 (Up to 4xVC4)

DMGE_4_L1

Gigabit Ethernet 4 (GbE)

19.28

4 (Up to 16xVC4)

NPT 1200 V.2

Tslot Modules – DATA – Layer 2 DMFE_4_L2

Quad FE L2 Ethernet card with MPLS functionality

DMFX_4_L2

Quad FX L2 Ethernet card with MPLS functionality

DMEoP_4

Quad FE- Ethernet Over PDH 20.28

NPT 1200 V.2

Tslot Modules – DATA – Layer 2 DMGE_2_L2

Dual GE L2 Ethernet port with MPLS functionality

DMGE_4_L2

Quad GE L2 Ethernet port with MPLS functionality

DMGE_8_L2 • Double-slot card • Up to 2 cards supported in a NPT-1200 shelf

21.28

• 2 COMBO ports supporting Optical GbE / Electrical 1000/100/10 Mbit • 6 optical/electrical GbE SFP based ports

NPT 1200 V.2

Tslot Modules – DATA – Layer 2 DMXE_48_L2 • Double Tslot (TS1 & TS2 ,TS6 & TS7) • Supports up to: • 96WAN ports (32 x VC-4) • Up to 8 x GE ports • 4 x 10GE ports • Supports PB (Provider Bridge) and MPLS functionality

DMXE_22_L2 Dual 10GE and GE L2 Ethernet port with MPLS functionality

22.28

NPT 1200 V.2

DATA Cards – Layer 2 Card

Type

LAN Interfaces

EoS WAN Interfaces

DMFE_4_L2

10/100BaseT

4

8 (Up to 4xVC4)

DMFX_4_L2

Optical Fast Ethernet (SFP)

4

8 (Up to 4xVC4)

*DMEoP_4

10/100BaseT

4

16xEoP (Up to 32xE1)

 All Layer 2 cards support MPLS (except DMEoP_4) 23.28

NPT 1200 V.2

DATA Cards – Layer 2 Card

Type

LAN Interfaces

EoS WAN Interfaces

DMGE_2_L2

Gigabit Ethernet (GbE)

2

64 (Up to 16xVC4)

DMGE_4_L2

Gigabit Ethernet (GbE)

4

64 (Up to 16xVC4)

DMGE_8_L2

Gigabit Ethernet (GbE)

8

96 (Up to 32xVC4)

DMXE_48_L2

GbE/10GbE

8 x GbE 4 x 10GbE

96 (Up to 32xVC4)

DMXE_22_L2

GbE/10GbE

2 X 10GbE 2 X 1GbE

64 (Up to 16xVC4)

24.28

NPT 1200 V.2

Tslot Modules – DATA – Pure packet DHGE_4E

• supports up to 4x10/100/1000 Base-T • Supports PoE+

DHGE_8

• Packet card supports up to 8 x 100/1000 Base-X with 4 CSFP

DHGE_16E • Double slot card and up to 2 cards supported in a shelf • Packet card supports up to 8 x 10/100/1000 Base-T and up to 8 x 100/1000 Base-X with 4 CSFP 25.28

NPT 1200 V.2

DATA Cards – Layer 2 Pure Packet Card

Type

LAN Interfaces

WAN Interfaces

DHGE_4E

GE/FX

4

2.5 for TDM Or 4 GBE for native packet

DHGE_8

GE/FX (CSFP based)

8

2.5 for TDM Or 8 GBE for native packet

DHGE_16

10/100BaseT 10/100BaseX

12 8 X BaseT 8 X BaseX

5 for TDM Or 16 GBE for native packet

26.28

NPT 1200 V.2

DMCES1_4  CES matrix card supporting circuit emulation interworking function (CES IWF)  TDM interfaces – supporting 4xSTM-1, each STM-1 can be either from front panel directly or from another SDH/PDH card through the backplane and SDH matrix  PSN interface – one SFP based GbE port on the front panel. This port shall be connected to the ETY port of the L2 switching card (DMGE_4_L2) through external cable

27.28

NPT 1200 V.2

Content  Main Features  Product Layout  Common Modules  INF, FCU, MCP

 Matrixes  CPTS, XIO64 and XIO16_4

 I/O Modules 

28.28

I/O Modules – PDH, SDH, DATA and CES

NPT 1200 V.2