2010 Fnh Government Catalog

2010 FNH USA PRODUCT CATALOG M I L I TA R Y A N D L A W E N F O R C E M E N T

®

fnhusa.com

SHOTGUNS

AUTOLOADING RIFLES

CARBINES

FN ACCESSORIES

GAU-21 (M3M)............................... 34

SLP Mark I..................................... 56

FNAR Standard.............................. 74

SCAR™ 16S..................................... 92

Handgun...................................... 100

Pintle Mounts................................ 36

SLP................................................. 56

FNAR Heavy................................... 74

SCAR 17S..................................... 92

Shotgun....................................... 100

SCAR System Overview................. 6

M3P............................................... 38

SLP Tactical.................................... 56

PS90 USG....................................... 94

FN 303......................................... 102

SCAR Family of Weapons............... 8

Pod Weapon Systems..................... 40

SLP Mark I Tactical......................... 56

FN TACTICAL

PS90 TR.......................................... 94

Rifle............................................. 103

MK 16............................................ 10

LRWS.............................................. 42

FS2000 Standard........................... 96

PS90............................................. 104

MK 17............................................ 12

MRWS............................................ 44

LESS LETHAL

SCAR™ 16....................................... 78 SCAR™ 17....................................... 80

FS2000 Tactical.............................. 96

P90®. ........................................... 104

FN 303 System............................... 60

FN 40G........................................... 82

FN 303P......................................... 62

P90® Standard............................... 84

5.7x28mm AMMUNITION

FS2000......................................... 105

P90® TR.......................................... 84

SS195LF Lead-Free Round............. 98

SCAR™. ........................................ 106

FN ASSAULT RIFLES ™

TABLE OF CONTENTS

™

MK 13 EGLM.................................. 14 IAR................................................. 16 SSR................................................. 18

HANDGUNS FNP-45 Tactical.............................. 48

™

F2000........................................... 105

FNP-45........................................... 48

RIFLES

P90® USG....................................... 84

Blank Round.................................. 98

Reflex Sights................................ 106

FNX-9............................................. 50

A3G................................................ 66

P90® LV.......................................... 86

Dummy Round............................... 98

Machine Guns.............................. 106

M249 SAW..................................... 22

FNX-40........................................... 50

A1.................................................. 68

P90® TR LV..................................... 86

SS190 Duty Round......................... 98

SCAR™ Accessories by ATK.......... 107

M249 PARA.................................... 22

Five-seveN®................................... 52

A1a................................................ 68

P90® USG IR................................... 86

L191 Tracer Round......................... 98

A5M............................................... 68

F2000 Standard............................. 88

SB193 Subsonic Round.................. 98

FN TRAINING

TSR XP........................................... 70

F2000 Tactical................................ 88

SS198LF Lead-Free Round............. 98

Course Information..................... 108

FN MACHINE GUNS

MK 48 MOD 1................................ 24 MK 46 MOD 1................................ 24 M240 B.......................................... 26

TSR XP USA.................................... 70

TABLE OF CONTENTS

FN SYSTEMS

The FN Heritage............................. 2

SS197SR Sporting Round............... 98

M240 L........................................... 26 M240 C.......................................... 28 M240 D.......................................... 28 M240 H.......................................... 28 M2HB QCB..................................... 30

1

THE FN HERITAGE

For more than 100 years Fabrique Nationale (FN) has equipped America’s law enforcement officers, as well as the soldiers, sailors, airmen and Marines of her military forces and her allies. From legacy systems like the BAR, M2 and Hi Power pistol that were designed by John M. Browning, to today’s M240, M249, M2HB QCB, LRWS, GAU-21 and the USSOCOM SCAR, FN stands at the cutting-edge of both law enforcement and military weapons. That’s why a majority of the small arms used by the U.S. Military today proudly bear the FN mark of quality.

1897

FN SCAR™, designated as

John M. Browning first

the MK 16 and MK 17,

began working with FN

is now being operationally

in 1897. During their

1939-1945

1953-1978

1977-1982

1989

1985-2003

The continued design collaboration

Browning-designed automatic rifles,

FN produces the Hi Power™

The U.S. Military adopts both the

FN wins the contract to produce

FN expands upon the success of the

of Browning and FN produces

pistols and machine guns made by

(GP 35), FAL, FNC and M2HB QCB for

FN MINIMI Squad Automatic

M16 rifles for the U.S. Military

Browning M2 and M3AN with the

autoloading pistols, the BAR and

FN and many other manufacturers

the Western world, and soon earns

Weapon (M249) and the FN MAG

at their plant in Columbia,

GAU-21 (M3M) which fires from the

the Western world.

belt-fed machine guns which help

are critical to the war effort. Once

the reputation as the “right arm

58 General Purpose Machine

South Carolina.

open bolt with twice the rate of fire

Browning visited the FN

the Allies defeat the Central Powers

liberated from German occupation

of the free world.” The Hi Power

Gun (M240). FN opens a plant in

of the M2 as well as the ability to

in WWI.

FN is tasked with refurbishing

remains the benchmark against

Columbia, South Carolina to build

fire at extreme angles.

more than two million U.S. small

which all other 9mm autoloading

small arms for the U.S. Military.

arms from the European Theater

service pistols are measured.

numerous Browningdesigned weapons for

factory 61 times until his death in Belgium in 1926.

deployed around the globe by USSOCOM, along with the MK 13 Grenade Launcher.

FNH USA HISTORY

1914-1918

partnership FN produced

FNH USA HISTORY

2010

of Operation.

1993

1998

2001

2003

2004

2007-2008

The FN P90® begins service with

FNH USA is established to manage

The FN 303 Less Lethal Launcher

The FN SPR A3G precision bolt-

The FN Five-seveN® pistol begins

FN introduces the large caliber

elite law enforcement agencies and

marketing, sales and service of FN

is introduced as the premier less-

action rifle becomes available to

service with elite law enforcement

FNP-45 polymer-framed autoloading

security services around the globe.

firearms in the United States.

lethal system for law enforcement.

the U.S. law enforcement market. It

and security services around

pistol and the selective-fire SCAR™

is also selected by the FBI as their

the world.

16 and SCAR™ 17 to the U.S. law

precision tactical rifle.

enforcement market.

®

fnhusa.com 2

3

Emerging from the U.S. Special Operations Force Combat Assault Rifle (SCAR) program, the MK 16 and MK 17 weapon systems use a common multi-caliber architecture that is highly modular and instantly adaptable to virtually any mission requirements, and is further enhanced by the MK 13 grenade launcher.

Built

with

an eye toward the

FN SCAR™ FAMILY

FN SCAR™ FAMILY

economic realities and small logistic footprint requirements of today’s highly mobile military, every component of the SCAR™ Family is readily adaptable to future upgrades and enhanced ammunition designs. Overall life cycle costs are reduced and nearly all maintenance can be easily accomplished at the operator or unit armorer level. The FN SCAR is serving on the front lines with America's warfighters in the defense of freedom.

THE NEW PARADIGM IN ASSAULT RIFLES. ®

4

FN SCAR™ FAMILY

WHEN THE MISSION IS DEFENDING FREEDOM, THE WEAPON IS MADE BY FN.™ www.fnhusa.com 5

FN SCAR™ FAMILY

SYSTEM OVERVIEW

solicitation was issued to the military firearms industry.

WHY SCAR? Since its adoption as the AR15 by the U.S. Air Force in 1962, and by the U.S. Army as the M16 in 1964, the basic individual military weapon of the United States has demonstrated certain compromises inherent in its design and cycle of operation. Foremost among these compromises is the M16’s direct-impingement gas operation system. During the firing and ejection cycles, substantial amounts of carbon and other byproducts of cartridge combustion are routed directly into the bolt and receiver areas, causing increased fouling. Naturally this increased fouling results in reduced operating reliability and requires greater frequency of cleaning and other maintenance by the weapon operator.

6

Responding to concerns from the Special Operations community regarding the reliability, accuracy, safety and ergonomics of the current M16/M4 platform, the Naval Surface Warfare Center, Crane, began an investigation for potential improvements. In the years that followed the U.S. Government conducted an Analysis of Alternatives (AoA) to determine if enhancements or upgrades could be made to the existing M16/M4 platform, or if a new weapon was needed. It was determined that a new, more reliable and more adaptable individual weapon was required. In late 2003 the Special Operations Force Combat Assault Rifle Joint Operational Requirements Document was approved and signed; the following January a worldwide

In July of 2004, in a full and open competition, nine vendors submitted a dozen different designs for the three new weapon systems. The FN SCAR/EGLM submissions were the only three separate weapons to pass all of the GO/ NO-GO criteria and were unanimously chosen by the selection board composed of senior SOF operators. In November of the same year FN was awarded the full SCAR contract for both 5.56mm and 7.62mm rifles, along with the 40mm Enhanced Grenade Launcher Module (EGLM). Developmental testing by FN designers, engineers and operators from various branches of the U.S. Military to evaluate the new weapons' endurance, reliability and accuracy was conducted from August 2005 through January 2006. Four Early User Assessments were

Low-Rate Initial Production (LRIP) and Production Acceptance Test and Evaluation were conducted from May 2006 through June of 2007. Beginning in August 2007, the Initial Operational Test and Evaluation phase was conducted by various units of the Special Operations community, including the U.S. Army Rangers, U.S. Marine Corps Special Operations Command, U.S. Navy SEALS and U.S. Army Special Forces. These tests were carried out in a variety of operational environments including urban, maritime, jungle and winter/ mountain warfare situations. Final testing was completed in September of 2008 and the SCAR and EGLM was announced as Operationally Effective / Operationally Suitable and Sustainable (OE/OS). Initial fielding to operational units within USSOCOM began in April of 2009. The first operational units armed with the SCAR system deployed for overseas duty in the summer of 2009.

FN SCAR™ FAMILY

FN SCAR™ FAMILY

also conducted prior to, during and after the developmental testing process to integrate feedback into the final SCAR design.

Adopted in 1964, the current rifle system of the united states has numerous compromises identified with reliability and accuracy

The fn scar™ system is the product of extensive development with the direct input of all branches of the USSOCOM community

the FN SCAR™ system is optimized for use by airborne, armor and special operations and conventional troops

Initial operational test and Evaluation of the FN SCAR™ was conducted in every combat environment

SCAR™ Principle of operation The MK 16 and MK 17 rifles operate on the short-stroke gas piston system. As the bullet passes the gas port in the barrel a portion of the propellant gases are routed through the gas regulator to the gas piston located below the front sight post. The gas pushes rearward against the piston, which drives the moving parts assembly rearward to eject the fired case and load a new cartridge from the magazine. Excess gases are vented forward from the gas regulator. The advantage over the M16/M4's direct gas impingement system is that heat, soot and carbon from propellant combustion are not routed into the bolt or chamber, keeping these critical areas cooler and cleaner for greater reliability and enhanced accuracy. The first position on the gas regulator is for normal operation, while the second position ensures there is no increase in the cyclic rate of fire when using a sound suppressor.

®

fnhusa.com

7

FN SCAR™ FAMILY

SCAR FAMILY OF WEAPONS MK 16 MOD 0 5.56x45MM

No other currently fielded weapon system in the world meets more mission requirements with fewer basic components than the FN SCAR. With two basic receivers and one grenade launcher, the SCAR can be quickly configured into more than a dozen different weapons to meet any

operational challenge. All SCAR weapons offer 100% ergonomic commonality and 99% maintainer commonality to reduce both operator and service training requirements. The 83% parts commonality across the SCAR system means a reduced footprint throughout the logistic chain.

MK 16 CQC BARREL

RECEIVER

14" Standard Barrel MK 16 STANDARD BARREL 18" Long Barrel

MK 13 MOD 0

MK 16 STANDARD barrel WITH MK 13

FN SCAR™ FAMILY

FN SCAR™ FAMILY

2 RECEIVERS + 6 BARRELS + 1 GRENADE LAUNCHER = 13 MISSIONS.

MK 16 CQC barrel WITH MK 13

100% Ergonomic Commonality means Reduced Operator Training 99% Maintainer Commonality means Reduced Maintainer Training

10" CQC Barrel

THE SCAR™ EQUATION.

MK 16 Long barrel

40x46MM

MK 16 Long barrel WITH MK 13

83% Parts Commonality translates into Reduced Logistical Footprint

MK 13

MK 17 CQC BARREL MK 17 CQC barrel WITH MK 13

MK 17 MOD 0

13" CQC Barrel

7.62x51MM

MK 17 STANDARD barrel RECEIVER

MK 17 STANDARD barrel WITH MK 13

16" Standard Barrel

20" Long Barrel

®

MK 17 Long barrel MK 17 Long barrel WITH MK 13

8

fnhusa.com

9

FN SCAR™ FAMILY

MK 16

CONTRACT AWARDED BY

USSOCOM

5.56x45MM

THE MK 16 IS NOW SERVING WITH AMERICA'S WARFIGHTERS IN HOSTILE ENVIRONMENTS AROUND THE GLOBE, PROVIDING THEM with A SIGNIFICANT ADVANTAGE IN EVERY OPERATIONAL ENGAGEMENT.

10

MK 16 LB (LONG BARREL) PRODUCT NO. 3148930020 - 18" barrel length - 800 meters effective range, point target - 39.0" overall length, with stock fully extended - 36.5" overall length, with stock fully collapsed - 29.0" overall length, with stock folded - 7.7 lbs. empty - Available 20-round magazine allows for lower operator profile in prone position - Adjustable bipod available

PRODUCT NO. 3148910020 - 14" barrel length - 600 meters effective range, point target - 35.0" overall length, with stock fully extended - 32.5" overall length, with stock fully collapsed - 25.0" overall length, with stock folded - 7.2 lbs. empty - Adjustable bipod available

MK 16 CQC (CLOSE QUARTERS COMBAT) PRODUCT NO. 3148920020 - 10" barrel length - 400 meters effective range, point target - 31.0" overall length, with stock fully extended - 28.5" overall length, with stock fully collapsed - 21.0" overall length, with stock folded - 6.7 lbs. empty - Adjustable bipod available

From concept to reality, the MK 16 exceeds expectations. Chosen by the U.S. Special Operations Command (USSOCOM) as its next generation modular assault rifle, the MK 16 is a 21st century weapon ideal for operations in today’s challenging tactical environment. After years of thorough research and development, combined with an exhaustive test and evaluation process during which more than 3,000,000 rounds were fired in numerous climates and operational conditions, the MK 16 has gained the respect and confidence of operators from all branches of the U.S. Armed Services. It represents the most tested, innovative, modular and adaptable individual combat rifle ever fielded.

GENERAL SPECIFICATIONS - 5.56x45mm NATO - Selective fire - Short stroke gas piston - Rotating, locking bolt - 625 rounds per minute (RPM) cyclic rate of fire - Compact design - Composite polymer Trigger Module - Flat Dark Earth (FDE) color RECEIVER - Hard-anodized monolithic aluminum receiver - MIL-STD 1913 accessory rails at the 3, 6, 9 and 12 o’clock positions - Adjustable folding front and folding/removable rear back-up iron sights

BARREL - Hammer-forged, chrome-lined steel - Fully free-floating design - Three barrel options available (CQC, Std, LB) - Barrels can be changed by operator in under five minutes with a point of impact shift of less than one minute of angle (1 MOA) from previously established zero - Highly-effective flash hider/interface STOCK - Telescoping design - Side folding feature provides more compact weapon package in aircraft and vehicle deployments, and can still be fired from the folded position - Adjustable cheekpiece - Composite polymer construction with molded-in FDE color

OPERATING CONTROLS - Ambidextrous selector lever and magazine release - Charging handle may be mounted on right or left side - Enlarged trigger guard for easier access when wearing gloves - Adjustable gas regulator for use with sound suppressor to maintain constant rate of fire

FN SCAR™ FAMILY

FN SCAR™ FAMILY

MK 16 STANDARD

MODULAR. ADAPTABLE. ACCURATE.

MAGAZINE - Available 20and 30-round magazine capacity - Steel magazine body - Low friction follower - Compatible with M16/M4 magazines

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

FN and ATK have begun WORKING TOGETHER on optimized ammunition for THE SCAR platform.

®

fnhusa.com

11

FN SCAR™ FAMILY CONTRACT AWARDED BY

USSOCOM

MK 17 7.62x51MM

THE MK 17 IS NOW SERVING WITH AMERICA'S WARFIGHTERS IN HOSTILE ENVIRONMENTS AROUND THE GLOBE, PROVIDING THEM With A larger caliber option and a SIGNIFICANT ADVANTAGE over current individual combat rifles IN EVERY OPERATIONAL ENGAGEMENT.

12

MK 17 LB (LONG BARREL) PRODUCT NO. 3188930020 - 20" barrel length - 900 meters effective range, point target - 42.0" overall length, with stock fully extended - 39.5" overall length, with stock fully collapsed - 32.0" overall length, with stock folded - 8.2 lbs. empty - 10-round magazine allows for lower operator profile in prone position - Adjustable bipod available

PRODUCT NO. 3188910020 - 16" barrel length - 700 meters effective range, point target - 38.0" overall length, with stock fully extended - 35.5" overall length, with stock fully collapsed - 28.0" overall length, with stock folded - 7.9 lbs. empty - Adjustable bipod available

MK 17 CQC (CLOSE QUARTERS COMBAT) PRODUCT NO. 3188920020 - 13" barrel length - 500 meters effective range, point target - 35.0" overall length, with stock fully extended - 32.5" overall length, with stock fully collapsed - 25.0" overall length, with stock folded - 7.7 lbs. empty - Adjustable bipod available

A selective-fire, semi- and full-auto 7.62x51mm NATO rifle using a short stroke gas piston, the MK 17 can be quickly configured by the individual operator in just minutes for close quarters combat (CQC), tactical and precision fire roles. Unlike many currently fielded 7.62x51mm rifles, controllability under recoil is a hallmark of the MK 17, allowing the operator to readily engage targets with multiple well-aimed rounds. As with the MK 16, the MK 17 has been tested and fielded with U.S. Forces. It adds the same innovation, modularity and adaptability as the MK 16, only in a larger caliber.

GENERAL SPECIFICATIONS - 7.62x51mm NATO - Selective fire - Short stroke gas piston - Rotating, locking bolt - 600 rounds per minute (RPM) cyclic rate of fire - Compact design - Composite polymer Trigger Module - Flat Dark Earth (FDE) color RECEIVER - Hard-anodized monolithic aluminum receiver - MIL-STD 1913 accessory rails at the 3, 6, 9 and 12 o’clock positions - Adjustable folding front and folding/removable rear back-up iron sights

BARREL - Hammer-forged, chrome-lined steel - Fully free-floating design - Three barrel options available (CQC, Std, LB) - Barrels can be changed by operator in under five minutes with a point of impact shift of less than one minute of angle (1 MOA) from previously established zero - Highly-effective flash hider/interface STOCK - Telescoping design - Side folding feature provides more compact weapon package in aircraft and vehicle deployments, and can still be fired from the folded position - Adjustable cheekpiece - Composite polymer construction with molded-in FDE color

OPERATING CONTROLS - Ambidextrous selector lever and magazine release - Charging handle may be mounted on right or left side - Enlarged trigger guard for easier access when wearing gloves - Adjustable gas regulator for use with sound suppressor to maintain constant rate of fire

FN SCAR™ FAMILY

FN SCAR™ FAMILY

MK 17 STANDARD

LIGHTWEIGHT PLATFORM WITH HARD-HITTING PERFORMANCE.

MAGAZINE - Available 10and 20-round magazine capacity - Steel magazine body - Low friction follower - Extended magazine base pad for improved ergonomics

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

FN and ATK have begun WORKING TOGETHER on optimized ammunition for THE SCAR platform.

®

fnhusa.com

13

FN SCAR™ FAMILY

CONTRACT AWARDED BY

USSOCOM

MK 13 EGLM 40MM LOW VELOCITY

THE MK 13 EGLM IS NOW SERVING WITH AMERICA'S WARFIGHTERS IN HOSTILE ENVIRONMENTS AROUND THE GLOBE, PROVIDING THEM with the ability to operationally employ the full range of lethal, non-lethal and special purpose 40mm ammunition.

MK 16 STANDARD barrel WITH MK 13

14

MK 17 STANDARD barrel WITH MK 13

PRODUCT NO. 3469001020 - 100 meters effective range on point target with low velocity grenade - 300 meters effective range on area target with low velocity grenade - Future capability: Greater than 600 meters effective range on area target with medium velocity grenades - Double-action trigger capable of multiple strikes - 9.6" barrel length - 2.96 lbs., MK 13 configured for MK 16, empty - 3.0 lbs., MK 13 configured for MK 17, empty - 26.5" Stand-alone, overall length, with stock fully extended - 20.25" Stand-alone, overall length, with stock fully collapsed - 5.92 lbs., Stand-alone, empty

The MK 13 Enhanced Grenade Launcher Module (EGLM) accepts all NATO-standard 40mm low velocity grenades. Future enhancements to the MK 13 will permit the use of enhanced medium velocity grenades now in development, offering greater range and larger payloads. The MK 13 may be quickly mounted underneath either the MK 16 or MK 17, or it may be configured as a stand-alone launcher with a telescoping buttstock. The MK 13 EGLM is tested, operational and currently deployed in harm's way with elite units of America's Armed Forces.

GENERAL SPECIFICATIONS - 40mm low velocity - Single-shot, manual action - Rotating locking breech system - Composite polymer Trigger Module - Leaf sight or mechanical quadrant sight, Fire Control Unit (FCU) under development - Flat Dark Earth (FDE) color RECEIVER - Molded composite polymer construction - Automatic ejector for rapid ejection of fired case - Molded stippling for enhanced grip

BARREL - Aluminum barrel with steel and elastomer muzzle protection ring for reduced weight - Barrel swivels both right and left for ease of loading from any firing position and allows use of extended length ammunition STOCK - MIL-STD 1913 accessory rails at the 3, 6, 9 and 12 o’clock positions - Telescoping design of stand-alone stock adapts to fit a variety of operator body sizes, body armor and load bearing equipment - Anodized aluminum construction for durability in Flat Dark Earth (FDE) color

OPERATING CONTROLS - Ambidextrous - Crossbolt safety for fast and easy operator access - Double-action trigger offers multiple strike capability to eliminate requirement to open and recock action and allows firing of ammunition with less sensitive or aged primers - Enlarged trigger guard for easier access when wearing gloves

FN SCAR™ FAMILY

FN SCAR™ FAMILY

MK 13 EGLM

POWERFUL, PORTABLE AND CONFIGURABLE FIRE SUPPORT.

MOUNTING - Optimized ergonomic trigger location when mounted using trigger adapters to either the MK 16 or MK 17 - Dual locking clamp levers provide secure mounting to MK 16 or MK 17 rifles or to a stand-alone stock assembly - Adds no length to overall weapon when mounted on MK 16 or MK 17 rifles ®

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

fnhusa.com

15

FN SCAR™ FAMILY

IAR

NEW ITEM

INFANTRY AUTOMATIC RIFLE

Principle of operation With today’s highly-mobile, fluid and unpredictable conflicts, the need for a versatile, reliable, high-rate-of-fire automatic weapon at the infantry squad level has never been greater. Historically infantry automatic weapons have been defined by their cycle of operation; firing from either a closedbolt or an open-bolt. Closed-bolt automatic rifle designs offer individual portability, greater accuracy and enhanced first-round reliability, but their fixed barrels retain heat during extended firing, quickly leading to the hazard of a chambered round overheating and cooking-off, which endangers both the operator and surrounding troops.

16

Open-bolt designs are often crewserved weapons that offer higher rates of sustained fire along with the ability to change barrels to prevent cook-offs, but do so at the expense of reduced portability and less accuracy. Bridging the gap between the individual soldier's closed-bolt assault rifle and the crew-served open-bolt machine gun is the FN Infantry Automatic Rifle (IAR). The IAR represents nothing less than a revolutionary leap in the technology of infantry automatic weapons. The IAR is designed to operate in either the closed-bolt mode or the open-bolt mode, using a dual-mode firing mechanism that gauges the barrel temperature.

Switching from one mode to the other is automatically performed by the thermal actuator located under the barrel just forward of the chamber. This allows the IAR to instantly transition from closed-bolt mode to open-bolt mode and continue to operate safely even when barrel temperature has reached the cookoff point. When firing stops and the barrel cools, the thermal actuator self-resets and the IAR switches back to the closed-bolt mode, all without manual intervention of the operator. Closed-bolt accuracy and open-bolt firepower in one weapon are now a reality with the FN IAR.

- Thermal-actuated transition between closed-bolt and openbolt operation without operator intervention in both semi-auto and full-auto modes - One minute of angle (1 MOA) accuracy capability in closed-bolt operation - 500 meters effective range, point target - 11.2 lbs., empty - 38.8" length, with buttstock fully extended - 36.3" length, with buttstock collapsed - 28.8" length, with buttstock folded

The revolutionary FN Infantry Automatic Rifle (IAR) is designed to fill the roles of the individual assault rifle and light machine gun in one light, compact package. Capable of both minute of angle (MOA) accuracy and high sustained rates of fire, the FN IAR offers a level of versatility that is unmatched by any other automatic weapon in the world. The FN IAR is magazine fed and automatically transitions from closed-bolt to open-bolt operation before the weapon reaches a temperature at which a chambered cartridge could cook-off, creating improved safety for the operator and surrounding troops alike. The FN IAR is the answer to the needs of America's infantry warfighters, today and for decades to come.

GENERAL SPECIFICATIONS - 5.56x45mm NATO - Selective fire - Short stroke gas piston - Rotating, locking bolt - 650 rounds per minute (RPM) cyclic rate of fire - Compact design - Folding bipod RECEIVER - Hard-anodized monolithic aluminum receiver - MIL-STD 1913 accessory rails at the 3, 6, 9 and 12 o’clock positions - Adjustable folding front and folding/removable rear back-up iron sights

BARREL - Hammer-forged, chrome-lined steel - Fully free-floating design - Barrel-mounted bayonet lug STOCK - Telescoping design - Side folding feature provides more compact weapon package in aircraft and vehicle deployments, and can still be fired from the folded position - Adjustable cheekpiece - Composite polymer construction with molded-in FDE color

OPERATING CONTROLS - Ambidextrous selector lever and magazine release - Charging handle may be mounted on right or left side - Trigger guard designed for use with arctic mittens - Adjustable gas regulator provides for reliable operation under normal or adverse conditions

FN SCAR™ FAMILY

FN SCAR™ FAMILY

FN IAR

A REVOLUTION IN AUTOMATIC RIFLE TECHNOLOGY.

High capacity magazine under final test and evaluation

MAGAZINE - Available 20and 30-round magazine capacity - Steel magazine body - Low friction follower - Compatible with M16/M4 magazines and 5.56mm drum magazines

®

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

fnhusa.com

17

FN SCAR™ FAMILY

SSR

NEW ITEM

FN SCAR SSR - 20" barrel length - 1000 meters effective range, point target - 42.5" overall length, with stock fully extended - 40.5" overall length, with stock fully retracted - 11.1 lbs. empty While semi-automatic precision rifles have been in service since the mid-1990s, the need exists for a weapon capable of precise aimed and rapid follow-up shots at distance, but with greater reliability and resistance to rough handling. Enter the FN Sniper Support Rifle (SSR). Born of the need to integrate the latest in electro-optics technologies, the FN SSR further advances the longrange capability of the MK 17 weapon platform. Utilizing the proven operating system and modular architecture found elsewhere in the FN SCAR™ Family, the SSR incorporates features seldom found in a semi-auto sniper rifle.

18

Beyond its modern battle rifle heritage, the SSR features a modular trigger that can be configured for two-stage or single-stage operation, and that has no adjustment screws to loosen or maintain. The SSR’s durable precision stock can be adjusted to the shooter’s preference without tools, and has an elastomercovered sloped cheek rest for improved ergonomics. More than just high strength aluminum alloy, the unique SSR extended receiver is designed for rigidity and features openings for manipulation of the gas regulator when used with a sound suppressor. The extra length accommodates currently-fielded night vision or thermal target augmentation devices used in conjunction with high performance day optics.

Engineered for uncompromising accuracy, the chrome-lined, cold hammer-forged barrel is mated to the receiver by a specially designed barrel extension, which along with a massive recoil lug provides consistent shot-to-shot performance. And like its MK 17 counterparts, the SSR’s barrel can be removed by the operator for cleaning or maintenance. When you need the accuracy of a match rifle with the ruggedness of an assault rifle – look no further than the FN SCAR SSR.

The FN SCAR™ Sniper Support Rifle (SSR) is a tailored design for long-range precision fire applications while also providing capability to fight close in. Based on the MK 17 SCAR, the SSR is capable of sub-minute of angle accuracy out to and beyond 1,000 yards. The SSR features an extended receiver rail for mounting in-line night vision and thermal devices with standard/sniper optics. It features an enhanced trigger requiring no adjustments that is rugged enough for field use but precise enough for long-range target engagement. The proprietary barrel extension and barrel profile improve accuracy, and the fully-adjustable non-folding stock enables the operator to optimize the rifle for firing position and body type.

GENERAL SPECIFICATIONS - 7.62x51mm NATO - Semi-automatic only - Short stroke gas piston - Rotating, locking bolt - Composite polymer Trigger Module - Capable of suppressed fire exclusively - Flat Dark Earth (FDE) color RECEIVER - Hard-anodized monolithic aluminum receiver - MIL-STD 1913 extended accessory rails at the 3, 6, 9 and 12 o’clock positions - Adjustable, removable folding front and rear back-up iron sights

BARREL - Hammer-forged, chrome-lined steel - Fully free-floating design - The barrel can be removed and replaced by the operator to facilitate cleaning and maintenance with negligible impact on previously established zero - Flash hider optimized for suppressed fire STOCK - Non-folding adjustable cheekpiece and length of pull without the use of tools - Aluminum and polymer construction

FPO

OPERATING CONTROLS - Ambidextrous selector lever and magazine release - Charging handle may be mounted on right or left side - Enlarged trigger guard - Adjustable gas regulator for use with or without suppressor to maintain consistent felt recoil

FN SCAR™ FAMILY

FN SCAR™ FAMILY

SNIPER SUPPORT RIFLE

GET LONG-RANGE PRECISION AND CLOSE-IN PROTECTION.

MAGAZINE - Available 10and 20-round magazine capacity - Steel magazine body - Extended magazine base pad for improved ergonomics - Low friction follower

®

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

fnhusa.com

19

Whenever the discussion turns to machine guns, the name FN proudly stands front and center. No other company in the world has more experience in the design, engineering and manufacturing of belt-fed automatic weapons than FN – from the legacy designs of John M. Browning that have protected America’s soldiers, sailors, airmen and Marines for nearly a century, to today’s machine gun variations that accompany our warfighters into harm’s way. FN makes the finest machine guns in the world. Period. MACHINE GUNS

Machine Guns (LMG), Medium Machine Guns (MMG) and Heavy Machine Guns (HMG). The FN Family of Light Machine Guns consists of the M249 and the lightweight MK 46 Mod 1 in 5.56x45mm, and the larger caliber,

MACHINE GUNS

FN machine guns cover the entire spectrum: Light

lightweight MK 48 Mod 1 in 7.62x51mm. The FN Family of Medium Machine Guns consists of the M240 series in 7.62x51mm. Finally, the FN Family of Heavy Machine Guns consists of the M2HB QCB, M3P and GAU-21 (M3M) in .50 caliber.

THE WORLD'S FINEST MACHINE GUNS. ®

20

FN MACHINE GUNS

WHEN THE MISSION IS DEFENDING FREEDOM, THE WEAPON IS MADE BY FN.™ www.fnhusa.com 21

FN FAMILY OF LIGHT MACHINE GUNS

M249 SAW / M249 PARA

HEAVY-HITTING LIGHT MACHINE GUNS. The M249 has been a mainstay throughout the U.S. Military since 1986 and is currently in service in over 30 countries. The M249 SAW is designed to be used on the front lines where it really matters, providing crucial fire support at the infantry squad/fire team level by providing highly accurate fire during fire and maneuver to take the objective. The ergonomically-shaped polymer buttstock contains a hydraulic buffer that allows SAW gunners to maintain a high rate of fire with accuracy and effect.

FN M249 Squad Automatic Weapon (SAW) PRODUCT NO. 9348199 - 5.56x45mm NATO - 800 meters effective range, point target - 3600 meters maximum range - 20.5" barrel length - 40.75" overall length - 9.5" overall height - 17.0 lbs. empty - 7.9-15.7 lbs. trigger pull - 775 rounds per minute (RPM) cyclic rate of fire

FN M249 PARA PRODUCT NO. 9348199-1 - 5.56x45mm NATO - 800 meters effective range, point target - 1800 meters maximum range - Short monobloc barrel - 16.3" barrel length - 36" overall length, with buttstock extended - 30.5" overall length, with buttstock collapsed - 9.5" overall height - 15.95 lbs. empty - 7.9-15.7 lbs. trigger pull - 775 rounds per minute (RPM) cyclic rate of fire

GENERAL SPECIFICATIONS - 5.56x45mm NATO - Open-bolt operation - Belt-fed - Changeable barrel - Matte black non-reflective finish on all surfaces - Adjustable steel bipod RECEIVER - Formed steel frame - Claw extractor design - Fixed, pivoting ejector plus side ejection of cases - Top cover integrated MIL-STD 1913 mounting rail for sighting systems

BARREL - Hammer-forged steel - Hard chrome-plated bore and chamber STOCK - Highly ergonomic polymer buttstock assembly with hydraulic recoil buffer system and non-slip buttplate on M249 SAW - Rotating, telescoping metal buttstock assembly with hydraulic recoil buffer system and non-slip buttplate on M249 PARA - Kit consisting of polymer buttstock and 20.5" barrel to convert M249 PARA to M249 SAW configuration is available (not shown)

OPERATING CONTROLS - Crossbolt safety button - Curved trigger for improved finger position and control in rapid fire

MACHINE GUNS

MACHINE GUNS

The M249 PARA is optimized for airborne, armored infantry and close quarters combat (CQC) operations with a shorter barrel and collapsible buttstock. It retains all of the features of the M249 SAW and can be field-converted back to the standard model configuration in just 30 seconds. Each M249 model includes one spare barrel.

FEED SYSTEM - NATO standard disintegrating link belt-fed - Under-mounted polymer ammunition container helps keep ammo cleaner for reduced wear and added reliability

MADE IN THE

UNITED

STATES OF AMERICA

®

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

22

fnhusa.com

23

FN FAMILY OF LIGHT MACHINE GUNS

MK 48 MOD 1 MK 46 MOD 1

SPECIALIZED MACHINE GUNS FOR SPECIAL MISSIONS. The 5.56x45mm MK 46 MOD 1 is the lightweight U.S. Special Operations Command (USSOCOM) variant of the M249 Squad Automatic Weapon (SAW). The 7.62x51mm MK 48 MOD 1, in use by USSOCOM, was designed to be light and compact enough to keep up with fast moving troops as they maneuver on and close with the enemy. The MK 48 MOD 1 can additionally augment conventional ground forces as well as when a maneuverable, lightweight, larger caliber machine gun is needed.

FN MK 48 MOD 1

FN MK 46 MOD 1

PRODUCT NO. 49500 - 7.62x51mm NATO - 800 meters effective range, point target (tracer burnout) - 3600 meters maximum range - 19.75" barrel length - 39.75" overall length

PRODUCT NO. 46200 - 5.56x45mm NATO - 800 meters effective range, point target - 1800 meters maximum range - 16.3" barrel length - 36.22" overall length - 9.33" overall height - 15.44 lbs. empty - 7.87-15.7 lbs. trigger pull - 730 rounds per minute (RPM) cyclic rate

- 9.33" overall height - 18.26 lbs. empty - 6-13 lbs. trigger pull - 730 rounds per minute (RPM) cyclic rate

GENERAL SPECIFICATIONS - Open-bolt operation - Belt-fed - Changeable barrel - Matte black non-reflective finish on all surfaces - Lightweight titanium bipod RECEIVER - Formed steel frame - Claw extractor design - Fixed, pivoting ejector plus side ejection of cases - Top cover integrated MIL-STD 1913 mounting rail for sighting systems

BARREL - Hammer-forged steel - Hard chrome-plated bore and chamber STOCK - Highly ergonomic polymer buttstock assembly with hydraulic recoil buffer system and non-slip buttplate - Optional rotating, telescoping metal buttstock assembly with hydraulic recoil buffer system and non-slip buttplate

OPERATING CONTROLS - Crossbolt safety button - Curved trigger for improved finger position and control in rapid fire FEED SYSTEM - NATO standard disintegrating link belt-fed - Available semi-rigid ammunition pouch system for MK 46 and MK 48 enhances capability to store, transport and feed linked ammunition

SEMI-RIGID AMMUNITION POUCH SYSTEM

MADE IN THE

UNITED

STATES

OF AMERICA

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

24

MACHINE GUNS

MACHINE GUNS

Both variants offer improved receiver pins, a feed tray with retention pawls and a vented handguard with MIL-STD 1913 rails at the 3, 6, and 9 o’clock positions. Enhanced heat shields and carry sling attachments help the operator to carry and employ the weapons in combat assault missions. One spare barrel is included.

®

fnhusa.com

25

FN FAMILY OF MEDIUM MACHINE GUNS

M240 B / M240 L

THE DEPENDABLE WORKHORSE OF MEDIUM MACHINE GUNS. The M240 was adopted by the U.S. Military following a worldwide competition in search of a reliable 7.62x51mm NATO machine gun. With pistol grip, carry handle and fixed buttstock, the M240 B is today’s "go-to" medium machine gun for all branches of the U.S. Armed Services. The FN M240 L is a product of a U.S. Army program to reduce the weight of the M240. The FN M240 L sheds approximately five pounds compared to a similar M240 B via the extensive use of titanium alloy in the receiver while maintaining the durability and absolute reliability M240 B operators have come to expect. This critical weight savings translates into far greater mobility with less fatigue for the operator. All M240s include one spare barrel.

FN M240 L

MACHINE GUNS

FN M240 B PRODUCT NO. 12976815 (M240 B Weapon only) 12976814 (M240 B with accessories) - 7.62x51mm NATO - 21.7" barrel length - 48.5" overall length - 11.6" overall height - 27.1 lbs. empty - 15.9 lbs. trigger pull - Single port gas regulator - 600 rounds per minute (RPM) cyclic rate

26

- Extended charging handle - Reduced weight and size gas block and regulator - Lightweight 5.8 lb. barrel - Titanium front sight - 22.2 lbs. empty - 600 rounds per minute (RPM) cyclic rate

RECEIVER - Solid steel frame on M240 B - Titanium receiver on M240 L - Gas-operated - Fires from the open bolt position to reduce heat build-up and potential for chambered round cook-off - Multiple integrated MIL-STD 1913 mounting rails for optics, lights and laser devices

BARREL - Hammer-forged steel - Fixed headspace and timing - Air-cooled design STOCK - Highly ergonomic polymer buttstock assembly with hydraulic recoil buffer system and non-slip buttplate for added operator control

OPERATING CONTROLS - Crossbolt safety button for easy operator access - Curved trigger for improved finger position and control in rapid fire - New offset charging handle for easy access and operation

MACHINE GUNS

PRODUCT NO. 13016468 (M240 L Weapon only) 13016466 (M240 L with accessories) - 7.62x51mm NATO - 21.7" barrel length - 48.5" overall length - 11.6" overall height - Titanium receiver - Composite polymer trigger grip

GENERAL SPECIFICATIONS - 7.62x51mm NATO - Open-bolt operation - Belt-fed - Changeable barrel - Matte black non-reflective finish on all surfaces - Adjustable steel bipod

FEED SYSTEM - NATO standard disintegrating link belt-fed EFFECTIVE RANGES - 800 meters effective range, point target - 900 meters effective range, tracer burnout - 1800 meters effective range, area target - 3725 meters maximum range - 600 meters effective range, grazing fire

M240 Adjustable ButtStock (in development)

MADE IN THE

UNITED

STATES OF AMERICA

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

M240 Short LIGHTWEIGHT Barrel

®

fnhusa.com

27

FN FAMILY OF MEDIUM MACHINE GUNS

FN M240/M240 C

FN M240 D

FN M240 H

PRODUCT NO. 11825980 (M240 Weapon only) 11826290 (M240 with accessories) 11826004 (M240 C Weapon only) 11826175 (M240 C with accessories) - 7.62x51mm NATO - 21.7" barrel length - 41.6" overall length - 6.5" overall height - 22.2 lbs. empty - 775 rounds per minute (RPM) cyclic rate - Right-hand feed system (M240 C only) - 3-port gas regulator

PRODUCT NO. 12977100 (M240 D Weapon only) 12977099 (M240 D with accessories) - 7.62x51mm NATO - 21.7" barrel length - 41.6" overall length - 9.0" overall height - 22.9 lbs. empty - 775 rounds per minute (RPM) cyclic rate - 3-port gas regulator - Egress kit available

PRODUCT NO. 13005478 (M240 H Weapon only) 13008366 (M240 H with accessories) - 7.62x51mm NATO - 21.7" barrel length - 41.6" overall length - 9.0" overall height - 25.8 lbs. empty - 775 rounds per minute (RPM) cyclic rate - Optional forward MIL-STD 1913 rails - Offset charging handle - Open-pronged flash hider - Single port gas regulator - Egress kit available

Based on the original FN MAG-58 design, the M240 made its U.S. debut as the M240 C in 1977 as a coaxial design for use on main battle tanks and armored fighting vehicles. With demonstrated reliability far exceeding other mid-caliber designs then in service, members of the M240 family quickly became the primary medium machine gun throughout the U.S. Military. The spade-grip, pintle-mounted M240 D is designed for use on armored vehicles, helicopters and naval craft. The M240 H is a U.S. Army variant further optimized for combat helicopter deployment. For the M240 H and M240 D, optional egress kits consisting of the buttstock, trigger mechanism and bipod enable the use of a pintlemounted M240 as a ground role machine gun for self-defense by dismounted vehicle crew members. All M240s include one spare barrel.

GENERAL SPECIFICATIONS - 7.62x51mm NATO - Open-bolt operation - Belt-fed - Quick-change barrel - Matte black non-reflective finish on all surfaces RECEIVER - Solid steel frame for durability - Gas-operated - Fires from the open bolt position to reduce heat build-up and potential for chambered round cook-off - Multiple integrated MIL-STD 1913 mounting rails for optics, lights and laser devices

BARREL - Hammer-forged steel - Fixed headspace and timing - Air-cooled design STOCK/MOUNT - Ability to mount on a bipod, tripod, vehicle or aircraft - Optional egress kit for converting pintle mount models to ground fire support configuration

OPERATING CONTROLS - Crossbolt safety button for easy operator access - Dual spade grips for enhanced control in burst and sustained fire (not included on M240/ M240 C models)

MACHINE GUNS

MACHINE GUNS

M240 C / M240 D M240 H

MEDIUM MACHINE GUNS TO MEET ANY MISSION.

FEED SYSTEM - NATO standard disintegrating link belt-fed EFFECTIVE RANGES - 800 meters effective range, point target - 900 meters effective range, tracer burnout - 1800 meters effective range, area target - 3725 meters maximum range - 600 meters effective range, grazing fire

Egress kit for M240 H (BIPOD NOT REQUIRED)

MADE IN THE

UNITED

STATES OF AMERICA

®

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

28

Egress kit for M240 D

fnhusa.com

29

FN MACHINE GUNS

M2HB QCB

THE LONG-RANGE, ACCURATE BATTLEFIELD ADVANTAGE. Descending from the legendary Browning .50 caliber that's renowned by generations of warriors for reliability, range, accuracy and hard-hitting downrange performance, the M2HB (Heavy Barrel) is one of the most effective suppressive fire weapons available for use against soft skinned and lightly armored vehicles, bunkers and buildings. Now the FN M2HB QCB delivers greater versatility and expanded field capabilities with the innovative Quick Change Barrel (QCB) system that allows the barrel to be changed by one operator in seconds and eliminates the need to check and adjust headspace and timing at the user level, speeding set-up and improving sustained fire support in battle. The M2HB QCB modification has been in service worldwide for more than a quarter century and allows any QCB barrel to be mounted on any QCB-modified weapon.

FN M2HB QCB MODIFICATION KIT PRODUCT NO. 3668210031 - M2HB QCB Modification Kit includes two barrels, guide sleeve shims, barrel extensions, breech locks and all miscellaneous small parts required for the modification - Depot-level procedure - Conversion requires only 30 minutes per weapon - Compatible with any U.S. MIL-SPEC M2HB

PRODUCT NO. 3668210031 (Stellite® barrel) 3668210057 (Chrome barrel) 3668240011 (M2 Pintle-M2 Coax QCB with Chrome barrel, not shown) - 1830 meters effective range, area target - 700 meters effective range, grazing fire - 45" barrel length - 65.1" overall length - 7.6" overall height, rear sight folded - 83.7 lbs. empty - 1:15" twist rate - 26-42.77 lbs. trigger sear maximum pull - 0.3" trigger travel to discharge

GENERAL SPECIFICATIONS - 50 BMG (12.7x99mm NATO) - Closed-bolt design - Short-recoil barrel operation - 450-635 rounds per minute (RPM) cyclic rate RECEIVER - Solid steel frame for durability - Projected weapon service life in excess of 100,000 rounds

BARREL - Hammer-forged steel - 18,000-round service life, Stellite® barrel - 10,000-round service life, chrome barrel - Quick Change Barrel (QCB) feature allows the barrel to be quickly exchanged by one operator and eliminates the need to check and adjust headspace and timing at the user level - M2HB QCB is compatible with any and all FN QCB barrels MOUNT - Adjustable M3 ground mount tripod with traversing and elevation mechanism to provide accurate fire on preestablished targets - Weapon is compatible with numerous armored vehicle and naval craft mounts

OPERATING CONTROLS - Dual spade grips for enhanced control in burst and sustained fire - Right-hand cocking handle for easy operator access - Trigger safety system FEED SYSTEM - NATO standard .50 caliber belt linked ammunition - Left-hand or right-hand belt feed design readily adapts to variety of mounting positions and available space - Left-hand or right-hand fired link ejection - Bottom fired case ejection

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

30

MACHINE GUNS

MACHINE GUNS

FN M2HB QCB

John M. Browning personally tests an early watercooled model of his .50 caliber machine gun in September 1918. This basic design has been continually refined over nearly a century and remains in frontline service with armed forces around the world as the FN M2HB QCB and M3M systems.

®

fnhusa.com

31

FN is a world leader in the design, development and manufacturing of automatic weapons, which are integrated onto various platforms. The FN Family of Systems is based on proven single-barrel automatic weapon designs that offer reliability, lethality, simplicity and safety. FN designs are easily adapted to mobility platforms (land, sea and air) such as wheeled and tracked vehicles, water craft, and rotary and fixed wing aircraft. FN has developed and built specialized SYSTEMS

.50 caliber machine gun systems to perform several different types of missions in extreme environments.

SYSTEMS

subsystems around its family of 5.56mm, 7.62mm and

FN integrated systems’ performance can be augmented by the inclusion of sighting systems that enable target acquisition and identification at further distances, as well as electronic fire controls that greatly increase the probability of hit.

FN INTEGRATED WEAPON SYSTEMS. ®

32

FN SYSTEMS

WHEN THE MISSION IS DEFENDING FREEDOM, THE WEAPON IS MADE BY FN.™ www.fnhusa.com 33

FN SYSTEMS

GAU-21 CONTRACT AWARDED BY USMC

GAU-21 (M3M)

THE FN GAU-21 IS APPROVED BY THE U.S. DEPARTMENT OF DEFENSE AS THE COMMON DEFENSE WEAPON SYSTEM (CDWS) FOR ALL CURRENT AND FUTURE MILITARY ROTARY WING AIRCRAFT.

FN GAU-21 (M3M)

SYSTEMS

Adopted BY THE U.S. DEPARTMENT OF DEFENSE These systems have been rigorously tested, evaluated and accepted by the U.S. Department of Defense (DOD) in order to provide warfighters with the best equipment to exceed their mission requirement while being extremely cost effective.

FN Herstal has been awarded a sole-source U.S. Navy contract to produce the M3M .50 caliber machine guns under the GUN, Aircraft, UNIT-21 (GAU-21) designation for Navy and Marine Corps rotary-wing assault aircraft.

34

The GAU-21 (M3M) is a .50 caliber (12.7mm) single barrel rapid fire machine gun suitable for rotary wing aircraft applications providing defensive firepower ranging out to nearly 2000 meters. The GAU-21 provides suppressive fire to counter light armored vehicles and to support fire in landing zones, ground and aerial threat suppression. Aside from the GAU-21 features, the unique “soft-mount” design incorporated into the GAU-21 allows substantial improvement in the overall accuracy of the system. These features, coupled with higher firing rates, user customizable right- or left-hand feed, large firing envelope and lighter overall system weight, have resulted in the U.S. Navy selecting the GAU-21 as the weapon system of choice to provide defensive firepower on rotary wing aircraft.

GENERAL SPECIFICATIONS - 50 BMG (12.7x99mm NATO) - Full auto - Short-recoil operated - Open-bolt design - 950-1100 rounds per minute (RPM) cyclic rate RECEIVER - Solid steel frame for durability - Open-bolt operation limits heat build-up to reduce potential of cook-off - Dual buffer system provides twice the rate of fire as the M2 system - Recoil buffer system for increased accuracy with reduced wear and vibration

BARREL - Hammer-forged steel - Useful barrel life of 10,000 rounds for simplified logistics and service requirements - Enhanced flash hider offers reduced firing signature to increase compatibility with current night vision equipment - Perforated barrel jacket for improved cooling and longer barrel life MOUNT - Mount provides optimal field of fire with the aircraft centerline for wider target coverage - Mount provides -70 degrees maximum depression angle for wider target coverage - Soft mount reduces recoil for both operator and airframe

OPERATING CONTROLS - Vibration isolated dual spade grips for enhanced control in burst and sustained fire - Manual recocking lever reduces cocking effort required - MIL-STD 1913 mount for sighting and target designation systems

SYSTEMS

PRODUCT NO. 3528901070 - 1850 meters effective range - 6500 meters maximum range - 36" barrel length - 66.5" overall length - 7" overall height - 81.6 lbs. empty - 1:15" twist rate

THE NEXT GENERATION IN HEAVY MACHINE GUNS.

FEED SYSTEM - NATO standard disintegrating link belt feed for added reliability - Flexible metal ammunition belt guide system reduces misfeeds - Can accept ammunition boxes ranging from 100-round to 600-round capacity for greater mission versatility - Fired link collection system for added aircraft and aircrew safety ®

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

fnhusa.com

35

FN SYSTEMS

PINTLE SYSTEMS

FN PINTLE SYSTEMS for aircraft, vehicle and navaL applications ARE NOW SERVING WITH AMERICA'S WARFIGHTERS IN HOSTILE ENVIRONMENTS AROUND THE GLOBE, PROVIDING THEM with A SIGNIFICANT FIREPOWER ADVANTAGE IN EVERY OPERATIONAL ENGAGEMENT.

FN MEDIUM FLOOR PINTLE (MFP)

FN MEDIUM WINDOW PINTLE (MWP)

FN MEDIUM DOOR PINTLE (MDP)

FN MEDIUM RAMP PINTLE (MRP)

FN LIGHT BOAT PINTLE (LBP)

FN MEDIUM BOAT PINTLE (MBP)

FN LIGHT VEHICLE PINTLE (LVP)

FN MEDIUM VEHICLE PINTLE (MVP)

- Designed for use with the FN M3M .50 caliber Heavy Machine Gun - Adaptable to suit a variety of airframes - Medium pintle head with elastic cradle assembly - 99.6" overall length - 75.2" width - 33.2" height - 0 to -60 degree angle of depression range - 600 round ammo box - Two flexible chutes for ammo feed and link disposal

- Designed for use with the FN M3M .50 caliber Heavy Machine Gun - Custom designed for each aircraft - Soft mount and elastic cradle - 46" width, right-hand - 41" width, left-hand - 53" height, right- and left-hand - 0 to -70 degree angle of depression range - 300-round quick release ammunition box with flexible ammunition feed guide - Brass and link collector

- Designed for use with the FN M3M .50 caliber Heavy Machine Gun - Elastic cradle with azimuth rotating yoke assembly - 557 lbs. with weapon and ammunition - 600-round capacity - 75.2" width - 33.2" height - 0 to -60 degree angle of depression range - Two flexible chutes for ammunition feed and link collection

- Designed for use with the FN M3M .50 caliber Heavy Machine Gun - Elastic weapon cradle assembly with dual butterfly trigger - Azimuth rotating yoke assembly with 172 degrees of traverse - 0 to -70 degree angle of depression range - 300-round quick release ammunition box with flexible ammunition guide - Fired case deflector - Flexible links chute with downward ejection

- Designed for use with the FN M240 7.62x51mm NATO Medium Machine Gun - Light pintle head with soft mount - 88 lbs. with weapon and ammunition - 250-round capacity - 22" width - 75.8" height - Telescoping column with firing stops in azimuth - 60 to -10 to degree angle of elevation/ depression range

- Designed for use with the FN M2HB or M2HB QCB .50 caliber Heavy Machine Gun - Medium pintle head with soft mount and quick locking/ delocking device - 370 lbs. with weapon - 95 lbs. armor plate and shoulder rests - 600-round capacity - 22" width - 75.8" height - 69 to -19 degree angle of elevation/ depression range

- Designed for use with the FN M240 7.62x51mm NATO Medium Machine Gun - Elastic cradle and home locking mechanism - 230 lbs. with weapon and ammunition - 250-round capacity - 47.5" width - 35.7" height - 0 to +60 degree angle of elevation range - Brass and link collector

- Designed for use with the FN M2HB and M3M .50 caliber Heavy Machine Gun - 600-round capacity (as shown) - 475 lbs. with weapon - 24.4" height - 360-degree traverse capability - 55 to -10 degree angle of elevation/ depression range

THE FN MEDIUM WINDOW PINTLE WITH FN GAU-21 MOUNTED

36

FN produces a family of pintle mounts for airborne applications that are categorized into light and medium configurations. The light pintle is fitted with the M240 7.62mm machine gun and the medium pintle is equipped with the M3 .50 caliber machine gun. The light and medium pintle can be grouped into four different types of mounting locations, such as external, window, door and ramp. Each configuration can be adopted to suit a variety of airframes in order to provide the user with the firepower needed to accomplish the mission. FN has designed each pintle mount as on off-the-shelf (OTS) item that needs only an interface plate assembly to adapt the mount to the specific helicopter application. Additionally, FN manufactures land and sea pintle mounts that can accept 7.62mm or .50 caliber machine guns. Light pintle assemblies use the 7.62mm M240 family of weapons or the MK 48 7.62mm weapon. Medium pintles utilize the M3M machine guns in air, land or sea applications. The land and sea pintles can utilize the M2HB QCB machine gun in addition to the M3M.

NOT SHOWN

SYSTEMS

SYSTEMS

THE FN MEDIUM FLOOR PINTLE WITH FN GAU-21 MOUNTED

fn makes the mounts to meet your mission.

THE FN LIGHT Boat PINTLE WITH FN M240 MOUNTED

THE FN MEDIUM BOAT PINTLE WITH FN M2HB MOUNTED

®

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

fnhusa.com

37

FN SYSTEMS

M3P

The M3P provides A high rate of fire .50 caliber solution for fixed forward fire applications.

M3P CAPABILITIES The M3P is a .50 caliber (12.7mm) single barrel rapid fire machine gun optimized for remote firing from rotary wing aircraft, ground vehicles and naval craft and provides both offensive and defensive fire power ranging out to nearly 2000 meters. The M3P when used in various applications is able to engage and destroy soft skinned and light armored vehicles as well as provide suppressing fire against both ground and aerial threats. Additionally, the M3P is suitable for application in remote weapon stations and is able to fire at all elevations up to 90 degrees from horizontal.

Features unique to the M3P are the 28V electrical interfaces that allow remote firing, cocking and clearing of the weapon system as well as allowing the operator to remotely place the weapon on safe. Depending on configuration, the M3P can be mounted in pods or without the pod casing, also it can be mounted on FN’s Medium Remotely-operated Weapon Stations (MRWS).

PRODUCT NO. 3648910023 - Especially designed for airborne operations - 1850 meters effective range - 6500 meters maximum range - 36" barrel length - 66" overall length - 7" overall height - 80 lbs. empty - 1:15" twist rate - Solenoid firing - Anti cook-off device - Compatible with a wide range of “mission tailored” ammunition - Left or right side ammunition feeding without extra components

The M3P machine gun is ideally suited to a wide range of applications, such as the primary .50 caliber weapon solution on the OH-58D Kiowa Warrior helicopter. The weapon is mounted externally and is fired by remote control by the operator or pilot. The M3P was selected for these applications based on rapid fire capability, reliability and accuracy. The M3P has electrical firing capability and electrically controlled recocking and clearing. The barrel assembly is capable of a 10,000-round service life when fired in controlled bursts that are typical of engagements used by aircraft and ground vehicle applications.

GENERAL SPECIFICATIONS - 50 BMG (12.7x99mm NATO) - Selective fire - Short-recoil operated - Closed-bolt design - 950-1100 rounds per minute (RPM) cyclic rate RECEIVER - Solid steel frame for durability - Dual buffer system provides twice the rate of fire as the M2 system - Recoil buffer system for increased accuracy with reduced wear and vibration

BARREL - Hammer-forged steel - Useful barrel life of 10,000 rounds for simplified logistics and service requirements - Enhanced flash hider offers reduced firing signature to increase compatibility with current night vision equipment - Perforated barrel jacket for improved cooling and longer barrel life

MOUNT - FN has developed several types of mounting configurations that allow the M3P machine gun to be operated from aircraft and remote weapon station - The M3P has been mounted in pods for fixed wing aircraft and in fixed forward firing mounts and pods for helicopters

PC 17 Pod Control Switch Panel

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

38

SYSTEMS

SYSTEMS

FN M3P

THE NEXT GENERATION IN HEAVY MACHINE GUNS.

BT 14 Armament Selection Box Switch Panel

®

fnhusa.com

39

FN HERSTAL AIRBORNE

FN SYSTEMS

POD WEAPON SYSTEMS

FOR HELICOPTERS AND SUBSONIC FIXED WING AIRCRAFT

FN HMP 250 PODS

FN RMP PODS

- .75 Mach capability - 194 lbs. empty - 265 lbs. fully loaded - 16.1" exterior pod height - 71.3" exterior pod length - 250-round capacity - Fired brass and link collector on HPM 250 LCC model

- .70 Mach capability - 212 lbs. empty - 351 lbs. fully loaded, with three rockets - 17.1" exterior pod height - 76.4" exterior pod length - 250-round capacity - Three 2.75"/70mm air-toground rocket tubes - Link collector - Adaptability to various combat situations - Zone capability given by specific control panel

FN HMP 400 PODS

40

AMMUNITION BOX

SOFT MOUNT

The HMP250 (250-round capacity) or HM400 (400-round capacity) ammunition box is reversible and allows feeding from the left or right side. Its design guarantees smooth movement of the ammunition belt with no risk of jamming or fouling due to aircraft maneuvers or acceleration.

The recoil forces which occur when the weapon is fired can be a source of structural fatigue on the carrier aircraft and can also reduce the precision of the gun. In FN Herstal’s pod, the machine gun is fitted on a soft mount that absorbs the recoil forces.

SPENT LINKS AND FIRED CASES COLLECTOR All the cases and links are collected in the removable collector (LCC).

BORESIGHTING DEVICE

SAFETY AND COCKING DEVICE

An elevation and azimuth adjustment device enables the gun to match the carrier aircraft’s optical sighting line.

This system incorporates safety mechanisms in the recocking device so that there are no chambered rounds until the system is engaged to fire. The machine gun can always be recocked in flight without limitation.

FN has provided turnkey solutions for rotary wing as well as fixed wing aircraft that require the reliability, lethality and performance of the proven M3P machine gun. The addition of a 3-round 2.75" rocket launcher that is integrated into the weapon pod extends the mission envelope. FN also supplies fire control systems that are specifically tailored to rotary or fixed wing aircraft. Additionally, the HMP and RMP pods are designed to be jettisoned in the event of an emergency. FN pods have been adopted for use by several NATO countries in subsonic aircraft, attack helicopter and cargo helicopter configurations.

- Certified by the U.S. Army in 1987 - .70 Mach capability - 197 lbs. empty - 314 lbs. fully loaded - 17.1" exterior pod height - 76.4" exterior pod length - 400-round capacity - Fired brass and link collector on HPM 400 LCC model

GENERAL SPECIFICATIONS - Pods accept one FN M3P .50 caliber Heavy Machine Gun - 950-1100 rounds per minute (RPM) cyclic rate of fire per gun/pod - Soft mount and elastic cradle reduces weapon firing vibration and shock to the aircraft - Recocking device and round counter on pilot’s firing control panel - Pod is capable of emergency jettison from the aircraft - Firing solenoid as well as the safety and cocking device

FN Pod Systems are currently in operational use by a number of NATO nations on both subsonic fixed wing and rotary wing combat aircraft.

SYSTEMS

SYSTEMS

FN WEAPON pods PROVIDe warfighters with A SIGNIFICANT FIREPOWER ADVANTAGE IN EVERY OPERATIONAL ENGAGEMENT.

WEAPON PODS AND MACHINE GUNS THAT FUNCTION AS ONE.

PC 17 Pod Control Switch Panel

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

BT 14 Armament Selection Box Switch Panel

®

fnhusa.com

41

FN SYSTEMS

LRWS

LIGHT REMOTELY-OPERATED WEAPON STATION FN Remote Weapon Stations are designed to optimize the operation of the weapon and the station as a single system.

FN LRWS

SYSTEMS

The LRWS was designed to provide a light weight remote firing capability with the operator completely under armor protection. The system is optimized for vehicles that cannot mount a heavier medium weapon station, vehicles that have no requirement for a heavy machine gun, or perimeter defense applications. As a result, FN has used its experience in medium weapon stations to design and develop a weapon station that is optimized to mount the 5.56mm and 7.62mm machine guns for perimeter defense, small vehicles and water craft. The LRWS is scalable in terms of ammunition capacity and optical capability depending on customer requirements, and it is also capable of accepting armor protection packages to guard against strikes from rocks, obstructions and fire from similar caliber weapons. Additionally, the LRWS is capable of elevating to +80 degrees and depressing to -60 degrees. This capability allows the operator to engage a target this much higher than the vehicle which is suitable in urban terrain as well as in mountainous regions. Furthermore, the capability to depress the weapon to -60 will allow the operator to engage a target that is close in to the vehicle or to fire into lower terrain that drops away from the vehicle.

GENERAL SPECIFICATIONS - Accepts all current FN M249, MK 46, MK 48 and M240 weapon systems - Modular design offers a wide range of userdefined custom options - 18-32 Volts Direct Current (VDC) power meeting MIL-STD 1275B - Continuous drive motors - Electrical recocking device SENSORS - Based on customer requirements - CCD for use in low-light conditions - Thermal/Infrared for full darkness use - Laser rangefinder reduces distance-related aiming errors

MOUNT - Light weight for ease of installation on vehicles and fixed locations - Low silhouette reduces counter fire target size and minimizes visual intrusion in sensitive areas - Soft recoil mount increases intended target hit probability and reduces collateral damage - Weapon can be quickly dismounted for infantry use CONTROLS - Operator display console for target identification and engagement - Single control handle for sight selection, aiming and firing - Built-in test system for diagnostics and failure detection

AVAILABLE OPTIONS - Low-light CCD, infrared/ thermal (IRT) night sights, laser rangefinder (LRF) and ballistic computer - STANAG 4569 Level I ballistic protection - Stabilization for firing on the move - Interface with sensors including Laser Warning Receiver (LWR) and Small Arms Detect Locating System (SADLS), remote operation via cable, networkable system linked through vehicle communications - Target tracking system and manual firing mode - Basic ammo box capacity 250 rounds of 7.62x51mm NATO linked ammunition - Up-capacity ammo boxes of 600 and 1,000 rounds of 7.62x51mm NATO linked ammunition - Fired case and link collection

SYSTEMS

- Less than 220 lbs. including weapon and ammunition, basic configuration - Less than 21 inches overall height, basic configuration - 90 degrees per second traverse speed - 60 degrees per second elevation speed - Vertical movement range of + 80 degrees elevation through -60 degrees depression - 360 degree traverse - Up to 20 degree vehicle/ mount deviation from the horizontal plane without influencing weapon performance

IDENTIFY AND ENGAGE THE THREAT. PROTECT THE OPERATOR.

FIRE CONTROL HANDLE

®

LRWS with M249 SAW 5.56x45mm

42

LRWS with MK 48 7.62x51mm

LRWS with M240 B 7.62x51mm

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

Operator display console

fnhusa.com

43

FN SYSTEMS

MRWS

MEDIUM REMOTELY-OPERATED WEAPON STATION Based on the same architecture as the LRWS, the MRWS is designed to optimize the operation of the weapon and the station as a single system.

FN MRWS

SYSTEMS

The MRWS with m3P at maximum depression angle

44

The MRWS with m3P at maximum elevation angle

Based on reliable and state of the art technologies, the FN Medium Remote Weapon Station (MRWS) has been designed to fulfill the force protection mission through fire support and self defense when mounted on light, medium and heavy vehicles. The MRWS can be fitted with many weapon types including the M249 5.56mm, M240 7.62mm, M2HB, M2HB QCB or M3P .50 caliber machine guns and 40mm Automatic Grenade Launcher (AGL) on a universal cradle assembly. The cradle assembly is equipped with a soft mount which optimizes firing performance and reduces the level of firing shock transmitted to the weapon station. The weapons can be complimented with several options such as a Laser Range Finder (LRF) with ballistic computer, two-axis gyroscopic stabilization, ballistic protection and other options to tailor the system to the user requirements. The system can also be used in a static mount to provide installation and perimeter defense.

GENERAL SPECIFICATIONS - Accepts all current FN M249, M240, M2HB QCB and M3M weapon systems, as well as future 40mm AGL integration - Modular design offers a wide range of userdefined custom options - 18-32 Volts Direct Current (VDC) power meeting MIL-STD 1275B - Continuous drive motors - Electrical recocking device SENSORS - Wide 12 degree field of view (FOV) and narrow 3.3 degree FOV video for daytime use - CCD for use in low-light conditions - Thermal/Infrared for full darkness use - Laser rangefinder reduces distance-related aiming errors

MOUNT - Light weight for ease of installation on vehicles and fixed locations - Low silhouette reduces counter fire target size and minimizes visual intrusion in sensitive areas - Soft recoil mount increases intended target hit probability and reduces collateral damage - Weapon can be quickly dismounted for infantry use CONTROLS - Operator display console for target identification and engagement - Single control handle for sight selection, aiming and firing - Built-in test system for diagnostics and failure detection

AVAILABLE OPTIONS - Low-light CCD, infrared/ thermal (IRT) night sights, laser rangefinder (LRF) and ballistic computer - STANAG 4569 Level I ballistic protection - Stabilization for firing on the move - Interface with sensors including Laser Warning Receiver (LWR) and Small Arms Detect Locating System (SADLS), remote operation via cable, networkable system linked through vehicle communications - Target tracking system and manual firing mode - Basic ammo box capacity 250 rounds of 7.62x51mm NATO linked ammunition - Up-capacity ammo boxes of 600 and 1,000 rounds of 7.62x51mm NATO linked ammunition - Fired case and link collection

NON-FNH USA VEHICLES SHOWN FOR ILLUSTRATIVE PURPOSES ONLY.

SYSTEMS

- Less than 400 lbs. including weapon and ammunition, basic configuration - Less than 26 inches overall height, basic configuration - 90 degrees per second traverse speed - 60 degrees per second elevation speed - Vertical movement range of + 73 degrees elevation through - 40 degrees depression - Can fire at any elevation angle with M3M - 360 degree traverse

IDENTIFY AND ENGAGE THE THREAT.

FIRE CONTROL HANDLE

®

For full information on this product, contact the FNH USA military department at (703) 288-3500, ext. 141

Operator display console

fnhusa.com

45

FN provides cutting-edge handgun technology to law enforcement officers and military operators. The FNP-45 Tactical and FNP-45 series offer fight-stopping .45 ACP ballistic performance in HANDGUNS

very adaptable package. The FN Five-seveN® puts carbine-level ballistic performance into a light,

HANDGUNS

a highly-ergonomic, exceptionally accurate and

easy to control autoloading pistol platform. The FNX series matches 9mm and .40 S&W chamberings with enhanced ergonomics and ease of handling to create the ideal duty pistol.

DUTY-READY HANDGUNS FROM FN. ®

46

FN HANDGUNS

REAL WORLD PRODUCTS. REAL WORLD PERFORMANCE.™ www.fnhusa.com 47

FN HANDGUNS

FNP-45 TACTICAL FNP-45

SERIOUS BIG BORE PISTOL PERFORMANCE FROM FN. Endurance tested to 35,000 rounds, the FNP-45 Tactical offers 45 ACP ballistic performance and a host of unique features no other handgun can match. The Flat Dark Earth (FDE) checkered polymer frame comes with two interchangeable backstraps to customize fit and is designed with a low bore axis for reduced felt recoil and enhanced control. All operating controls are fully ambidextrous. The barrel is hammer-forged stainless steel with a threaded muzzle. The FDE stainless steel slide is fitted with high-profile combat sights and includes two mounting bases to accept an optional red-dot electronic sight. The FNP-45 USG offers a more conventional sight and slide design that's ideally suited for general duty issue.

NEW ITEM

The optional electronic sight co-witnesses with the high profile combat sights

PRODUCT

CALIBER

OPERATION

FRAME COLOR

SLIDE FINISH

47917

45 ACP

DA/SA

BLACK

MATTE BLACK

47915

45 ACP

DA/SA

BLACK

MATTE SILVER

SIGHTS

MAGAZINES

WEIGHT

STANDARD

14-ROUND

33.2 OZ.

STANDARD

14-ROUND

33.2 OZ.

47577

45 ACP

DA/SA MS

BLACK

MATTE BLACK

STANDARD

15/14-ROUND

32.4 OZ.

47579

45 ACP

DA/SA MS

BLACK

MATTE SILVER

STANDARD

15/14-ROUND

32.4 OZ.

47938

45 ACP

DA/SA MS

FLAT DARK EARTH

MATTE BLACK

STANDARD

15/14-ROUND

32.4 OZ.

66805

45 ACP

DA/SA MS

FLAT DARK EARTH

FLAT DARK EARTH

HIGH-PRO

15-ROUND

33.6 OZ.

NOT SHOWN

GENERAL SPECIFICATIONS - 45 ACP - Double-action/singleaction (DA/SA) operation with decocking/manual safety levers (MS) - Made in the USA SLIDE - All stainless steel construction - External extractor with loaded chamber indicator - Manual safety models come with front and rear cocking serrations - Three dot fixed combat sights

48

BARREL - Hammer-forged stainless steel - Polished chamber and feed ramp - 5.3" threaded barrel on Tactical model - 4.5" barrel on other models FRAME - Rugged polymer construction with replaceable steel frame/slide rails - Two interchangeable backstrap inserts with lanyard eyelets - MIL-STD 1913 accessory mounting rail - Serrated trigger guard

HANDGUNS

HANDGUNS

Three magazines, Operator's manual, locking device and lockable fitted hard case come standard.*

Manual safety models have cocking serrations both front and rear

OPERATING CONTROLS - Fully-ambidextrous decocking/safety levers, slide stop levers and magazine release button - Ring-style external hammer

Operating controls are ambidextrous for ease of use

MAGAZINES - Stainless steel magazine body - Low-friction follower - Polymer basepad *THE FNP-45 TACTICAL comes STANDARD with A FITTED, SOFT CORDURA® NYLON CASE

MADE IN THE

UNITED

STATES OF AMERICA

®

fnhusa.com

49

FN HANDGUNS

NEW ITEMS

FNX-9 / FNX-40

GET THE LATEST IN PISTOL PERFORMANCE FROM FN. The new FNX is the latest evolution in hammer-driven pistol design with enhanced reliability and all of the latest features that demanding operators need. The completely re-designed ergonomic polymer frame has a low bore axis providing less felt recoil. The new checkered grip enables no-slip enhanced control. Four interchangeable backstrap inserts quickly adapt the FNX to the operator's hand size. The profiled stainless steel slide has cocking serrations front and rear, and the 4" hammer-forged stainless barrel offers durable service life. Ambidextrous operating controls make the FNX perfect for every situation. Proudly made in the USA.

PRODUCT

CALIBER

OPERATION

FRAME COLOR

SLIDE FINISH

66822

9MM

DA/SA MS

BLACK

MATTE BLACK

66826

9MM

DA/SA MS

BLACK

MATTE SILVER

66852

40 S&W

DA/SA MS

BLACK

MATTE BLACK

66856

40 S&W

DA/SA MS

BLACK

MATTE SILVER

MAGAZINES

WEIGHT

STANDARD

17-ROUND

21.9 OZ.

STANDARD

17-ROUND

21.9 OZ.

STANDARD

14-ROUND

24.4 OZ.

STANDARD

14-ROUND

24.4 OZ.

NOT SHOWN

GENERAL SPECIFICATIONS - 9mm or 40 S&W - Double-action/singleaction (DA/SA) operation with decocking/manual safety levers (MS) SLIDE - All stainless steel construction - External extractor with loaded chamber indicator - Front and rear cocking serrations - Newly designed fixed three-dot combat sights with Deep-V rear notch for greater accuracy

50

SIGHTS

HANDGUNS

HANDGUNS

Three magazines, Operator's manual, locking device and lockable fitted hard case come standard.

BARREL - Hammer-forged stainless steel - Polished chamber and feed ramp - 4" barrel on all FNX models

OPERATING CONTROLS - Fully-ambidextrous decocking/safety levers, slide stop levers and magazine release button - Ring-style external hammer

FRAME - Rugged polymer construction with replaceable steel frame/slide rails - Two interchangeable backstrap inserts with lanyard eyelets - MIL-STD 1913 accessory mounting rail - Serrated trigger guard

MAGAZINES - Stainless steel magazine body - Low-friction follower - Polymer basepad - Round indicator

the new FNX is available chambered in either 9mm or 40 S&W

All FNX pistols offer Enhanced ergonomics and ambidextrous controls

The FNX-9 and FNX-40 rear sight allows you to have complete visibility of the front dot with a 3-dot sight system, or to use the traditional method of aligning the top edges of the sights MADE IN THE

UNITED

STATES OF AMERICA

®

fnhusa.com

51

FN HANDGUNS

FIVE-SEVEN®

LOW-RECOIL, HIGH-VELOCITY PERFORMANCE FROM FN. Used by more than 300 U.S. law enforcement agencies, the FN Five-seveN® single-action autoloading pistol offers a lightweight polymer frame with checkered panels for enhanced grip. It includes an accessory rail along the underside of the frame for attaching tactical lights and lasers. The polymer slide cover provides protection from the elements and is ideal for duty-use carry in any environment. All operating controls are designed for easy access including a reversible magazine release and ambidextrous manual safety levers. The barrel is hammer-forged for accuracy and chrome-lined for service life. The FN FiveseveN pistol is also approved for NRA-sanctioned Tactical Police Competition. Three magazines, Operator's manual, locking device and lockable fitted hard case come standard.

OPERATION

FRAME COLOR

SLIDE FINISH

SIGHTS

WEIGHT

3868929120

SA MS

MATTE BLACK

MATTE BLACK

ADJUSTABLE

20-ROUND

20.8 OZ.

3868929230

SA MS

FLAT DARK EARTH

MATTE BLACK

ADJUSTABLE

20-ROUND

20.8 OZ.

3868929240

SA MS

OLIVE DRAB GREEN

MATTE BLACK

ADJUSTABLE

20-ROUND

20.8 OZ.

3868929122

SA MS

MATTE BLACK

MATTE BLACK

FIXED 3-DOT

20-ROUND

20.8 OZ.

3868929232

SA MS

FLAT DARK EARTH

MATTE BLACK

FIXED 3-DOT

20-ROUND

20.8 OZ.

3868929242

SA MS

OLIVE DRAB GREEN

MATTE BLACK

FIXED 3-DOT

20-ROUND

20.8 OZ.

NOT SHOWN

GENERAL SPECIFICATIONS - 5.7x28mm - Single-action (SA) operation with manual safety levers (MS) - Internal hammer SLIDE - Polymer slide cover - Rear cocking serrations - Adjustable three-dot target sights or fixed three-dot combat sights - Night sights available by special order

52

MAGAZINES

BARREL - Hammer-forged stainless steel with chrome-lined bore - Polished chamber and feed ramp - 4.75" barrel on all models FRAME - Rugged polymer construction - Checkered grip - Underframe accessory mounting rail - Serrated trigger guard

OPERATING CONTROLS - Fully-ambidextrous manual safety levers - Reversible magazine release button

HANDGUNS

HANDGUNS

PRODUCT

the five-seven® features a 20-round magazine which provides the highest capacity for duty pistols

the five-seven® uses the SS190 DUTY ROUND offering enhanced Ballistic performance for military and law enforcement users

MAGAZINES - Polymer magazine body - Low-friction follower - Polymer basepad

®

fnhusa.com

53

The FN brand is synonymous with innovative automatic shotguns. FN built the John M. Browning-

successful autoloading shotgun and quickly set the standard for shootability, quality and reliability.

SHOTGUNS

SHOTGUNS

designed Auto-5 in 1903. It was the world’s first

Today’s FN SLP autoloader is ready for any military or law enforcement mission. It is ideal for facility security, force protection, dynamic building entry, NRA American Rifleman Magazine Golden Bullseye Award 2009 Shotgun of the Year

DEMAND A DYNAMIC ENTRY. ®

54

urban operations, special unit/team deployment and general law enforcement patrol.

FN SHOTGUNS

REAL WORLD PRODUCTS. REAL WORLD PERFORMANCE.™ www.fnhusa.com 55

FN SHOTGUNS

SLP MARK I / SLP SLP TACTICALS

THE MOST VERSATILE SELF-LOADING SHOTGUN EVER MADE. PERIOD. The SLP and SLP Mark I represent the ultimate in shotgun performance for patrol duty, dynamic entry and personal defense. All SLP models offer 3" chambers chrome-lined bore and interchangeable choke systems. The SLP Standard features an 18" barrel, a MIL-STD 1913 top rail with adjustable ghost ring rear sight and a high-profile protected front sight. The SLP Mark I offers a 22" barrel with Weaver-pattern cantilever scope base, adjustable folding rear sight and a red fiber-optic front sight. The SLP Mark I is also available in a rifled barrel model for optimal accuracy with slugs. SLP Tactical models offer a pistol grip stock with interchangeable combs. two gas pistons, operators’s manual, locking device and lockable hard case come standard.

BOTH MODELS BELOW FEATURE Tri-Rail forward accessory mount, matte black pistol grip synthetic stock, recoil pad and three interchangeable comb inserts. Projected availability - Fall 2010

56

DESIGNATION

BBL./CHOKE

OVERALL LENGTH

SIGHTS

AMMO CAPACITY

WEIGHT

3088929022

SLP MARK I

22" STD. INV.

43"

LOW/ADJ. REAR

8+1

8.2 LBS.

3088929135

SLP MARK I RIFLED

22" RIFLED

43"

LOW/ADJ. REAR

8+1

8.2 LBS.

3088929010

SLP STANDARD

18" STD. INV.

38.75"

HIGH/ADJ. REAR

6+1

7.7 LBS.

3088929150

SLP MARK I TACTICAL

22" STD. INV.

43"

LOW/ADJ. REAR

8+1

7.9 LBS.

3088929145

SLP TACTICAL

18" STD. INV.

39"

HIGH/ADJ. REAR

6+1

7.4 LBS.

GENERAL SPECIFICATIONS - 12 Gauge 3" magnum - Gas-operated semi-automatic - Active Valve gas system - Two-piece bolt - Two gas pistons come standard

BARREL - Hard-chromed bore and 3" chamber barrel - Standard Invector™ interchangeable choke tubes (except on rifled barrel model) - Accessory sporting barrels are available

RECEIVER - Aircraft-grade aluminum alloy receiver - Top-mounted cantilever Weaver-pattern accessory rail on SLP Mark 1 models - Top-mounted onepiece MIL-STD 1913 accessory rail on SLP Standard model

STOCK - Matte black synthetic - Checkered gripping panels on forearm and grip - Premium recoil pad - Three interchangeable combs on pistol grip Tactical models - Two steel sling swivel studs

OPERATING CONTROLS - Receiver-mounted bolt release button - Curved bolt operating handle - Crossbolt safety button on trigger guard MAGAZINE - Extended magazine tube - Aluminum magazine tube cover - Forward-mounted MIL-STD 1913 Tri-Rail mount on Tactical models

SIGHTS - Low-profile, adjustable folding blade rear sight and red fiberoptic front sight on SLP Mark I models - High-profile, adjustable ghost ring rear sight and wing protected front sight on SLP Standard model

SHOTGUNS

SHOTGUNS

PRODUCT

SLP Tactical Shotgun Stocks include three interchangeable combs for customized fit

Absolute reliability, Reduced felt recoil and fast cycling speed are hallmarks of the FN SLP autoloading shotgun

MADE IN THE

UNITED

STATES OF AMERICA

®

fnhusa.com

57

Around the globe military forces and law enforcement agencies alike are embracing the concept of less lethal technology for civil disorder,

correctional

institutions,

border

LESS LETHAL

protection, or in any other situation where the control, dispersal and/or neutralization of

LESS LETHAL

defense and physical facility security, force

non-compliant individuals or groups must be accomplished with maximum effectiveness and minimum risk. FN is the world leader in less lethal technology and training.

STATE OF THE ART LESS LETHAL TECHNOLOGY. ®

58

FN LESS LETHAL

REAL WORLD PRODUCTS. REAL WORLD PERFORMANCE.™ www.fnhusa.com 59

FN LESS LETHAL

FN 303 SYSTEM

Warning: Use with extreme caution. Not intended for recreational use. Misuse may result in injury or death. Avoid aiming at face or head. Read operator's manual before use. Instruction required before use. All operators of the FN 303 Less Lethal SystemS and the FN 303P must be certified by the FNH USA Training Team prior to deploying the system. See pages 108-109 for course and contact information.

PROTECTING THE BORDERS OF THE UNITED STATES OF AMERICA. When control of violent crowds or suspects is needed with maximum effectiveness and minimum risk, reach for the FN 303 Less Lethal Launcher. Using compressed air to launch a fin-stablized .68 caliber projectile, the FN 303 is able to deliver its payload to a point-specific target at ranges up to 50 meters with much greater accuracy than competing systems. The FN 303 may be configured as a stand-alone launcher or attached under either an M16 or M4 rifle with the appropriate mount.

PRODUCT

DESIGNATION

LOWER FRAME

UPPER FRAME

SIGHTS

MAGAZINE

48001

303 LAUNCHER

BLACK POLYMER

BLACK ALUMINUM

FLIP-UP IRON SIGHTS

15-ROUND

48194

M16 MOUNT

BLACK POLYMER

N/A

N/A

N/A

48195

M4 MOUNT

BLACK POLYMER

N/A

N/A

N/A

PRODUCT

DESIGNATION

CALIBER

PAYLOAD ID COLOR

PROJECTILE WEIGHT

PACKAGE QTY.

48048552

INDELIBLE PAINT

.68" STYRENE BODY

YELLOW

8.5 GRAMS

150

48048600

PAVA/OC POWDER

.68" STYRENE BODY

ORANGE

8.5 GRAMS

150

48048554

CLEAR

.68" STYRENE BODY

CLEAR

8.5 GRAMS

150

48048555

WASHABLE PAINT

.68" STYRENE BODY

PINK

8.5 GRAMS

150

48048610

INERT POWDER

.68" STYRENE BODY

WHITE

8.5 GRAMS

150

NOT SHOWN

CONTRACT AWARDED BY THE U.S. DEPARTMENT OF HOMELAND SECURITY, U.S. CUSTOMS AND BORDER PROTECTION IN OCTOBER 2007.

FN 303 Launcher shown mounted under M16 rifle.

C-More Systems™ sights shown not included.

MARKING - TRAINING - OC PROJECTILES

LESS LETHAL

lESS LETHAL

One Air Cylinder, One magazine and AN operator's manual come standard.

The FN 303 offers a topmounted MIL-STD 1913 rail that accommodates user-supplied optical or electronic red-dot sights

The FN 303 allows for the neutralization of violent suspects with maximum effectiveness and minimum risk to the operator

FOR MILITARY, LAW ENFORCEMENT, CORRECTIONS AND SECURITY DUTY.

MADE IN THE

UNITED

STATES OF AMERICA

FOR MILITARY, LAW ENFORCEMENT, CORRECTIONS AND SECURITY DUTY.

60

®

fnhusa.com

61

FN LESS LETHAL

FN 303P

NEW ITEM

A MORE PORTABLE, LESS LETHAL SIDEARM OPTION. With a six-shot capacity and an effective range of up to 25 meters, the new FN 303P Less Lethal Pistol offers both military and law enforcement operators an accurate and reliable option when the situation calls for gaining control of non-compliant individuals or small groups without resorting to lethal force. The FN 303P uses a disposable compressed CO2 gas capsule contained within the six-shot detachable magazine to launch its fin-stablized projectile. It offers a manual safety, alloy barrel and upper frame, stainless steel firing engine, and comes with both fixed iron and laser sights to meet any lighting situation. Every FN 303P comes with one magazine and a lockable hard case.

PRODUCT

DESIGNATION

LOWER FRAME

UPPER FRAME

SIGHTS

MAGAZINE

48605

303P

BLACK POLYMER

BLACK ALUMINUM

IRON AND LASER

6-SHOT

LESS LETHAL

LESS LETHAL

One magazine, operator's manual and lockable hard case come standard.

FN has long been a pioneer in the technologies that bridge the gap between firearms and traditional impact, chemical and electromuscular disruption devices. Today’s FN’s Less

TRAINING/MARKING PROJECTILE

NEW

Lethal System consists of the carbine-size 303 Less Lethal Launcher and the holster-size 303P Less Lethal Pistol. Combining exceptional reliability, simplicity, ease of use and point

PROJECTILE

target accuracy at extended distances, the

The new FN 303P uses a disposable CO2 gas capsule contained within the six-shot detachable polymer magazine to launch its fin-stabilized .68 caliber projectile. The gas in the capsule is held in reserve until the loaded magazine is inserted into the 303P and the capsule seal is punctured.

the fn 303P is equipped with open iron sights and a visible laser, plus a MIL-STD 1913 rail on the frame

the FN 303P is accurate on point specific targets at ranges up to 25 yards

FN Less Lethal System is an essential component on any military or law enforcement equipment PRODUCT NO: 48048611

list. With a broad assortment of task-specific projectiles available, the FN Less Lethal System

MADE IN THE

UNITED

STATES OF AMERICA

is today’s go-to option whenever and wherever

®

less lethal force is needed.

FOR MILITARY, LAW ENFORCEMENT, CORRECTIONS AND SECURITY DUTY.

62

FOR MILITARY, LAW ENFORCEMENT, CORRECTIONS AND SECURITY DUTY.

fnhusa.com

63

FN’s extensive line of bolt-action rifles are based on the world-renowned Pre-’64 Model 70-type action with a three-position safety and massive external claw extractor for Controlled Round Feeding. The forged steel receiver features an integrated recoil lug and a large, flat bottom profile for enhanced rigidity and improved bedding. FN precision rifles offer MILRIFLES

bores to provide pinpoint accuracy for thousands

RIFLES

SPEC hammer forged barrels with hard-chromed

of rounds. All FN bolt-action rifles are fitted into synthetic stocks for reliable accuracy under the most demanding field conditions. When the success of the mission depends on making that one perfect shot, depend on bolt-action rifles from FN.

FN MEANS PERFECTION IN PRECISION RIFLES. ®

64

FN RIFLES

REAL WORLD PRODUCTS. REAL WORLD PERFORMANCE.™ www.fnhusa.com 65

FN RIFLES

A3G

GET THE SAME PERFORMANCE AS SELECTED BY THE FBI. The FN SPR A3G has been selected by the FBI as one of their tactical precision rifles of choice. The A3G offers Controlled Round Feed, blade ejection, the original Model 70-type two-lever trigger and a three-position safety. The A3G has a cold hammer-forged MIL-SPEC fluted barrel with hard-chromed bore and is held to +/- .001" headspace to produce and maintain a sub-half minute of angle (½ MOA) accuracy standard at 100 yards, making it the ideal weapon for the long-range tactical operator. The forged steel action is hand-bedded with Marine-Tex® epoxy into a fully-adjustable olive drab McMillan™ A3 fiberglass tactical stock that is equipped with multiple steel sling studs.

DESIGNATION

CALIBER

ACTION LENGTH

BARREL

OVERALL LENGTH

MAGAZINE

WEIGHT

75544

SPR A3G

308 WIN.

SHORT MAGNUM

24" FLUTED

44" (ADJUSTABLE)

5-RD/FLP

11.5 LBS.

GENERAL SPECIFICATIONS - 308 Winchester - Bolt-action - 1/2 MOA accuracy standard - Made in the USA

The FN A3G is designed and manufactured to achieve and maintain a ½ MOA accuracy standard. There is no finer precision rifle available than the FN A3G.

66

PRODUCT

RECEIVER - Forged steel construction with flat bottom profile - Short magnum action length - External claw extractor with Controlled Round Feeding - Blade ejection - Integral recoil lug - One-piece steel MIL-STD 1913 optics rail with an additional 20 MOA elevation built in

BARREL - Hammer-forged, free-floating fluted barrel - Chrome-lined bore - Target crown

OPERATING CONTROLS - Model 70-type two-lever adjustable trigger - Three-position safety - Knurled bolt handle

STOCK - McMillan A3 fiberglass tactical stock - Fully adjustable for length of pull and comb height - Textured gripping surfaces - Action hand-bedded with Marine-Tex epoxy - Multiple steel sling swivel studs

MAGAZINE - Hinged floorplate magazine (FLP) - Tactical box magazine available in 2010

The American Rifle for America's Riflemen The FN A3G bolt-action rifle is built by FN Manufacturing in Columbia, South Carolina. It represents the best of American design, American technology, American craftsmanship and American pride.

RIFLES

RIFLES

Operator’s manual, test target, rifle data book AND locking device come standard.

THE FN SPR A3G is equipped with a model 70-style external claw extractor and three-position safety

ALL FN SPR A3G rifles are equipped with a one-piece titanium MIL-STD 1913 mounting rail with an additional 20 MOA of elevation built in for use at extended ranges

CONTRACT AWARDED BY FBI.

MADE IN THE

UNITED

STATES OF AMERICA

®

fnhusa.com

67

FN RIFLES

A1 / A1a / A5M

THE PRECISION RIFLES THAT ADAPT TO THE RIFLEMAN. FN SPRs are based on the legendary Pre-’64 Model 70-design action with a massive external claw extractor for Controlled Round Feed, blade ejection, the original two-lever trigger and a three-position safety. All models have cold hammer-forged MIL-SPEC barrels with hard-chromed bores, and are held to +/- .001" headspace to produce and maintain one minute of angle (1 MOA) accuracy, making them natural choices for longrange target shooting and competition. A one-piece steel MIL-STD 1913 rail with an additional 20 MOA of elevation is factory-installed. FN SPR rifles are fitted into matte black McMillan™ fiberglass stocks. operator’s manual, data book AND locking device come standard.

DESIGNATION

CALIBER

ACTION LENGTH

BARREL

OVERALL LENGTH

MAGAZINE

WEIGHT

75502

A1

308 WIN.

SHORT MAGNUM

24" NON-FLUTED

44"

4-RD/DBM

11.8 LBS.

75510

A1a

308 WIN.

SHORT MAGNUM

20" FLUTED

40"

4-RD/DBM

11.3 LBS.

75530

A5M

308 WIN.

SHORT MAGNUM

20" FLUTED

40"

4-RD/DBM

11.3 LBS.

75532

A5M

308 WIN.

SHORT MAGNUM

24" FLUTED

43.5" TO 45"

4-RD/DBM

11.8 LBS.

75538

A5M

308 WIN.

SHORT MAGNUM

24" FLUTED

43.5" TO 45"

4-RD/TBM

11.8 LBS.

75536

A5M

300 WSM

SHORT MAGNUM

24" FLUTED

43.5" TO 45"

5-RD/FLP

11.8 LBS.

NOT SHOWN

GENERAL SPECIFICATIONS - 308 Winchester or 300 WSM - Bolt-action - 1 MOA accuracy standard - Made in the USA RECEIVER - Forged steel construction with flat bottom profile - Short magnum action length - External claw extractor with Controlled Round Feeding - Blade ejection - Integral recoil lug - One-piece steel MIL-STD 1913 optics rail with an additional 20 MOA elevation built in

68

BARREL - Hammer-forged free-floating barrel - Chrome-lined bore - Target crown

OPERATING CONTROLS - Model 70-type two-lever adjustable trigger - Three-position safety - Knurled bolt handle

STOCK - McMillan fiberglass tactical stock - A5M models are fully adjustable for length of pull and comb height - Textured gripping surfaces - Multiple steel sling swivel studs or sling mounting points

MAGAZINE - Hinged floorplate magazine (FLP) or detachable box magazine (DBM)

The American Rifle for America's Riflemen FN SPR bolt-action rifles are built by FN Manufacturing in Columbia, South Carolina. They represent the best of American design, American technology, American craftsmanship and American pride.

RIFLES

RIFLES

PRODUCT

ALL FN SPR rifles are equipped with a one-piece steel MIL-STD 1913 mounting rail with an additional 20 MOA of elevation built in for use at extended ranges

all FN SPR models are equipped with a model 70-style external claw extractor and threeposition safety

MADE IN THE

UNITED

STATES OF AMERICA

®

fnhusa.com

69

FN RIFLES

TSR XP / TSR XP USA

TACTICAL RIFLES BUILT FOR EXTREME PERFORMANCE. Fast, light and compact, FN TSR XP (Tactical Sport Rifle - Extreme Performance) feature Controlled Round Feed (except in 223 Rem.), blade ejection and a three-position safety. The three-lever Tactical Sport Trigger™ has an adjustable pull range from 3 to 5 pounds and is factory set at an optimal 3¾ pounds. All TSR XP and TSR XP USA (Ultra-Short Action) rifles have cold hammer-forged MIL-SPEC fluted barrels. The one-piece steel MIL-STD 1913 optical rail has additional elevation built-in so optics have a greater range of adjustment at further distances. The Model 70-design forged steel receiver is available in ultra-short and short magnum action lengths and mates to a full aluminum bedding block molded into the FN/Hogue® synthetic stock covered with a textured olive drab OverMolded rubber surface.

PRODUCT

DESIGNATION

CALIBER

ACTION LENGTH

BARREL

OVERALL LENGTH

MAGAZINE

WEIGHT

75404

TSR XP USA

223 REM.

SUPER SHORT

20" FLUTED

40"

6-RD/FLP

7.8 LBS.

75412

TSR XP

308 WIN.

SHORT MAGNUM

20" FLUTED

40.5"

4-RD/DBM

8.8 LBS.

75416

TSR XP

308 WIN.

SHORT MAGNUM

24" FLUTED

44.5"

4-RD/DBM

9.6 LBS.

75424

TSR XP

300 WSM

SHORT MAGNUM

24" FLUTED

44.5"

3-RD/FLP

10.1 LBS.

RIFLES

RIFLES

operator’s manual AND locking device come standard.

NOT SHOWN

GENERAL SPECIFICATIONS - 223 Remington, 308 Winchester or 300 WSM - Bolt-action - Made in the USA Sear

C Overtravel Adj. Screw

Sear Return Spring

Pull Weight Adj. Screw A B Trigger Housing Actuator Take Up Spring Triggerpiece

70

1

Ready Position

C 2X

The FN Tactical Sport Trigger System™ is a threelever trigger that works on the simple principle of the pivoting lever. Pictured at left are the triggerpiece (A), actuator (B) and sear (C). All internal parts, pins and springs are precision crafted from stainless steel. The sear and actuator are electroless nickel Teflon® coated for corrosion resistance and smoother operation.

X

A

2 B

Released Position

The triggerpiece offers a wide, smooth face to better distribute finger pressure for a lighter, more sensitive feel. Because of the trigger’s new geometry and 2:1 mechanical advantage, as the triggerpiece moves rearward (X) it travels only half the distance of the actuator (2X). Since this distance is greatly decreased, the perception of trigger creep and overtravel movement are virtually eliminated.

RECEIVER - Forged steel construction with flat bottom profile - External claw extractor with Controlled Round Feeding (except in 223 Rem.) - Integral recoil lug - One-piece steel MIL-STD 1913 optics rail with additional elevation built in

BARREL - Hammer-forged fluted free-floating barrel - Target crown STOCK - FN/Hogue synthetic sporter-style stock with OverMolded olive drab rubber surface - Full-length aluminum bedding block - Premium recoil pad - Multiple steel sling swivel studs

OPERATING CONTROLS - Tactical Sport Trigger System™ three-lever adjustable trigger - Three-position safety - Knurled bolt handle MAGAZINE - Hinged floorplate magazine (FLP) or detachable box magazine (DBM)

The American Rifle for America's Riflemen FN TSR XP bolt-action rifles are built by FN Manufacturing in Columbia, South Carolina. They represent the best of American design, American technology, American craftsmanship and American pride.

THE TSR XP offers a onepiece steel mil-std 1913 rail for mounting optical or electronic sights

The TSR XP features a recessed target crown that protects the rifling for greater accuracy

MADE IN THE

UNITED

STATES OF AMERICA

®

fnhusa.com

71

Descending from the legendary Browning Automatic Rifle (BAR) made famous in battle by Allied forces around the globe, the FNAR puts autoloading speed and bolt-action accuracy into NATO (308 Win.) the FNAR is available with either a 16" or 20" cold hammer-forged MILSPEC fluted barrel with hard-chromed bore and target crown. The matte black synthetic pistol grip tactical stock is fully adjustable. The FNAR

AUTOLOADING RIFLES

AUTOLOADING RIFLES

one powerful package. Chambered in 7.62x51mm

is equipped with multiple MIL-STD 1913 rails for mounting day optics, night vision, tactical lights and lasers. It’s a multi-role mid-caliber rifle that's ideally suited for urban patrol, facility security, force protection and overwatch duties.

AUTOLOADING SPEED. BOLT-ACTION ACCURACY. ®

72

FN FNAR

REAL WORLD PRODUCTS. REAL WORLD PERFORMANCE.™ www.fnhusa.com 73

FN RIFLES

NEW ITEMS

FNAR STANDARD FNAR HEAVY

BOLT-ACTION ACCURACY IN AN AUTOLOADING RIFLE. Chambered in 7.62x51mm NATO (308 Win.) the FNAR is available with either a 16" or 20"standard contour, or 20" heavy contour cold hammer-forged MIL-SPEC fluted barrel with a hard-chromed bore and target crown. An ambidextrous magazine release button drops the 10- or 20-round detachable steel box magazine (DBM). A one-piece, receivermounted MIL-STD 1913 optical rail comes standard, along with three rails attached to the stock’s fore-end for mounting a selection of tactical lights and lasers. The matte black synthetic pistol grip tactical stock is fully adjustable for comb height and length of pull via interchangeable inserts, and for cast on or cast off using interchangeable shims. One magazine, Operator's manual, three recoil pads, three combs, shim kit, locking device and lockable fitted hard case come standard.

DESIGNATION

CALIBER

BARREL

OVERALL LENGTH

74

WEIGHT

3108929140

FNAR STANDARD

7.62x51MM (308 WIN.)

20" STANDARD FLUTED

41.5"

10-RD/DBM

8.8 LBS.

3108929250

FNAR STANDARD

7.62x51MM (308 WIN.)

20" STANDARD FLUTED

41.5"

20-RD/DBM

9.0 LBS.

3108929150

FNAR HEAVY

7.62x51MM (308 WIN.)

20" HEAVY FLUTED

41.5"

10-RD/DBM

9.9 LBS.

3108929100

FNAR HEAVY

7.62x51MM (308 WIN.)

20" HEAVY FLUTED

41.5"

20-RD/DBM

10.0 LBS.

3108929310

FNAR STANDARD

7.62x51MM (308 WIN.)

16" STANDARD FLUTED

37.5"

20-RD/DBM

8.0 LBS.

3108929320

FNAR STANDARD

7.62x51MM (308 WIN.)

16" STANDARD FLUTED

37.5"

10-RD/DBM

8.4 LBS.

NOT SHOWN

Every FNAR comes with one magazine, three interchangeable recoil pads, three interchangeable comb inserts and a full set of shims to let you adjust for cast on, cast off and drop at comb. Extra 5-, 10- or 20-round steel magazines are also available as accessories as shown on pagE 103.

MAGAZINE

GENERAL SPECIFICATIONS - 7.62x51mm (308 Win.) - Semi-automatic - Gas-operated, rotating bolt lockup - 20-round magazine RECEIVER - Aircraft-grade aluminum alloy - One-piece MIL-STD 1913 optics rail

BARREL - Hammer-forged, fluted - Chrome-lined - Target crown STOCK - Synthetic pistol grip stock - Checkered gripping surfaces - Three interchangeable recoil pads - Three interchangeable comb inserts - Multiple MIL-STD 1913 mounting rails

OPERATING CONTROLS - Fully-ambidextrous magazine release button - Crossbolt safety button - Extended bolt release lever

AUTOLOADING RIFLES

AUTOLOADING RIFLES

PRODUCT

the FNAR offers bolt- action accuracy combined with autoloading speed

The FNAR offers Enhanced ergonomics and a fullyambidextrous magazine release button

MAGAZINES - Steel magazine body - Low-friction follower - Available in 5-, 10- and 20-round capacities ®

fnhusa.com

75

When it comes to mission profiles, the only constant is change. When FN designs a tactical firearm system, flexibility in real world military and law enforcement operational environments is a key factor. FN Tactical Systems are developed from the ground up to address the specific challenges

and SCAR™ 17 are the select-fire law enforcement variants of the newest U.S. military weapon

TACTICAL

TACTICAL

of modern tactical situations. The FN SCAR™ 16

system. The FN P90® with its innovative 5.7x28mm ammunition is the ultimate tool for today’s VIP protective detail missions, close-quarters combat, urban operations and dynamic entry scenarios.

THE CUTTING EDGE IN TACTICAL FIREARMS. ®

76

FN TACTICAL

REAL WORLD PRODUCTS. REAL WORLD PERFORMANCE.™ www.fnhusa.com 77

NOW AVAILABLE TO

NEW ITEMS

LAW ENFORCEMENT AGENCIES

FN TACTICAL

SCAR™ 16

MODULAR. ADAPTABLE. ACCURATE. Chambered for the high-velocity 5.56x45mm NATO (223 Rem.) cartridge, the selective fire SCAR™ 16’s innovative gas-operated, short stroke piston system reduces fouling for greater reliability. The SCAR 16 system features three user-interchangeable, freefloating, cold hammer-forged MIL-SPEC barrels with hard-chromed bores and A2-type flash suppressors. Fully-ambidextrous operating controls instantly adapt the SCAR 16 to any user. The receiver-integrated MIL-STD 1913 optical rail plus three accessory rails enable mounting of a wide variety of tactical lights and lasers. The sidefolding, polymer stock is fully adjustable for comb height and length of pull, and is colored matte black or authentic USSOCOM Flat Dark Earth. NOW AVAILABLE TO LAW ENFORCEMENT AGENCIES.

78

SCAR 16 STANDARD PRODUCT NO. 98703 (Flat Dark Earth) PRODUCT NO. 98723 (Matte black) - 14" barrel length - 600 meters effective range, point target - 35.0" overall length, with stock fully extended - 32.5" overall length, with stock fully collapsed - 25.0" overall length, with stock folded - 7.2 lbs. empty - Adjustable bipod available

PRODUCT NO. 98705 - 18" barrel length - 800 meters effective range, point target - 39.0" overall length, with stock fully extended - 36.5" overall length, with stock fully collapsed - 29.0" overall length, with stock folded - 7.7 lbs. empty - Available 20-round magazine allows for lower operator profile in prone position - Adjustable bipod available

SCAR 16 CQC (CLOSE QUARTERS COMBAT) PRODUCT NO. 98701 - 10" barrel length - 400 meters effective range, point target - 31.0" overall length, with stock fully extended - 28.5" overall length, with stock fully collapsed - 21.0" overall length, with stock folded - 6.7 lbs. empty - Adjustable bipod available

GENERAL SPECIFICATIONS - 5.56x45mm NATO - Selective fire - Short stroke gas piston - Rotating, locking bolt - 625 rounds per minute (RPM) cyclic rate of fire - Compact design - Composite polymer Trigger Module - Matte black or Flat Dark Earth (FDE) color RECEIVER - Hard-anodized monolithic aluminum receiver - MIL-STD 1913 accessory rails at the 3, 6, 9 and 12 o’clock positions - Adjustable folding front and folding/removable rear back-up iron sights

BARREL - Hammer-forged, chrome-lined steel - Fully free-floating design - Three barrel options available (CQC, Std, LB) - Barrels can be changed by operator in under five minutes with a point of impact shift of less than one minute of angle (1 MOA) from previously established zero - Highly-effective flash hider/interface STOCK - Telescoping design - Side folding feature provides more compact weapon package in aircraft and vehicle deployments, and can still be fired from the folded position - Adjustable cheekpiece - Composite polymer construction with molded-in matte black or FDE color

OPERATING CONTROLS - Ambidextrous selector lever and magazine release - Charging handle may be mounted on right or left side - Enlarged trigger guard for easier access when wearing gloves - Adjustable gas regulator for use with sound suppressor to maintain constant rate of fire MAGAZINE - Available in 20- and 30-round magazine capacity - Steel magazine body - Low friction follower - Compatible with M16/M4 magazines

TACTICAL

TACTICAL

SCAR 16 LB (LONG BARREL)

The compact fn scar™ 16 cqc makes an ideal SWAT entry team carbine or patrol rifle

FN and ATK have begun working together on optimized ammunition for the SCAR™ platform

multiple mil-std 1913 rails allow mounting of a variety of optical, electronic or laser sights

Rugged alloy and polymer construction allow the fn scar™ 16 to operate reliably in the most adverse conditions

®

fnhusa.com

79

NOW AVAILABLE TO

NEW ITEMS

LAW ENFORCEMENT AGENCIES

FN TACTICAL

SCAR™ 17 RECENTLY FIELDED TO L.A.P.D. SWAT.

LIGHTWEIGHT PLATFORM WITH HARD-HITTING PERFORMANCE. Firing the long range, hard-hitting 7.62x51mm NATO (308 Win.) cartridge, the selective fire SCAR™ 17’s innovative gas-operated, short stroke piston system reduces fouling for greater reliability. The SCAR 17 system features three user-interchangeable, freefloating, cold hammer-forged MIL-SPEC barrels with hard-chromed bores and A2-type flash suppressors. Fully-ambidextrous operating controls instantly adapt the SCAR 17 to any user. The receiver-integrated MIL-STD 1913 optical rail plus three accessory rails enable mounting of a wide variety of tactical lights and lasers. The sidefolding polymer stock is fully adjustable for comb height and length of pull, and is colored in matte black or authentic USSOCOM Flat Dark Earth. NOW AVAILABLE TO LAW ENFORCEMENT AGENCIES.

SCAR 17 STANDARD PRODUCT NO. 98743 (Flat Dark Earth) PRODUCT NO. 98763 (Matte black) - 16" barrel length - 700 meters effective range, point target - 38.0" overall length, with stock fully extended - 35.5" overall length, with stock fully collapsed - 28.0" overall length, with stock folded - 7.9 lbs. empty - Adjustable bipod available

80

PRODUCT NO. 98745 - 20" barrel length - 900 meters effective range, point target - 42.0" overall length, with stock fully extended - 39.5" overall length, with stock fully collapsed - 32.0" overall length, with stock folded - 8.2 lbs. empty - 10-round magazine allows for lower operator profile in prone position - Adjustable bipod available

SCAR 17 CQC (CLOSE QUARTERS COMBAT) PRODUCT NO. 98741 - 13" barrel length - 500 meters effective range, point target - 35.0" overall length, with stock fully extended - 32.5" overall length, with stock fully collapsed - 25.0" overall length, with stock folded - 7.7 lbs. empty - Adjustable bipod available

GENERAL SPECIFICATIONS - 7.62x51mm NATO - Selective fire - Short stroke gas piston - Rotating, locking bolt - 600 rounds per minute (RPM) cyclic rate of fire - Compact design - Composite polymer Trigger Module - Matte black or Flat Dark Earth (FDE) color RECEIVER - Hard-anodized monolithic aluminum receiver - MIL-STD 1913 accessory rails at the 3, 6, 9 and 12 o’clock positions - Adjustable folding front and folding/removable rear back-up iron sights

BARREL - Hammer-forged, chrome-lined steel - Fully free-floating design - Three barrel options available (CQC, Std, LB) - Barrels can be changed by operator in under five minutes with a point of impact shift of less than one minute of angle (1 MOA) from previously established zero - Highly-effective flash hider/interface STOCK - Telescoping design - Side folding feature provides more compact weapon package in aircraft and vehicle deployments, and can still be fired from the folded position - Adjustable cheekpiece - Composite polymer construction with molded-in matte black or FDE color

OPERATING CONTROLS - Ambidextrous selector lever and magazine release - Charging handle may be mounted on right or left side - Enlarged trigger guard for easier access when wearing gloves - Adjustable gas regulator for use with sound suppressor to maintain constant rate of fire MAGAZINE - Available in 10- and 20-round magazine capacity - Steel magazine body - Extended magazine base pad for improved ergonomics - Low friction follower

TACTICAL

TACTICAL

SCAR 17 LB (LONG BARREL)

The fn scar™ 17 STD makes an ideal SWAT team rifle or patrol rifle

FN and ATK have begun working together on optimized ammunition for the SCAR™ platform

multiple mil-std 1913 rails allow mounting of a variety of optical or electronic sights, lasers and tactical lights

The FN SCAR™ 17 is fully ambidextrous and the telescoping stock quickly adapts to body armor or load bearing equipment

®

fnhusa.com

81

FN TACTICAL

NOW AVAILABLE TO

LAW ENFORCEMENT AGENCIES

40GL

POWERFUL, PORTABLE AND CONFIGURABLE FIRE SUPPORT. The FN 40GL Enhanced Grenade Launcher seamlessly integrates with the SCAR™ 16 and SCAR™ 17 rifles. Firing all types of 40x46mm NATO standard low-velocity grenades, the FN 40GL may be mounted under either rifle using a trigger adapter and dual locking clamp levers, or it may be configured as a stand-alone launcher. Completely ambidextrous, the FN 40GL utilizes a polymer receiver mated to an aluminum barrel for durability and light weight. The barrel swivels to the right or left for ease of loading and unloading from any firing position. The alloy stand-alone stock assembly quickly telescopes to fit all operators and is equipped with multiple MIL-STD 1913 mounting rails for lights, lasers and other targeting devices. The FN 40GL offers a traditional folding leaf sight or a mechanical quadrant sight system.

NOW AVAILABLE TO LAW ENFORCEMENT AGENCIES.

Optional sight shown not included

SCAR™ 16 STANDARD barrel WITH FN 40GL-L

82

SCAR™ 17 STANDARD barrel WITH FN 40GL-H

PRODUCT NO. 98795 - 100 meters effective range on point target with low velocity grenade - 300 meters effective range on area target with low velocity grenade - Future capability: 625 meters effective range on area target with medium velocity grenades - Double-action trigger capable of multiple strikes - 9.6" barrel length - 2.96 lbs., 40GL configured for SCAR 16, empty - 3.0 lbs., 40GL configured for SCAR 17, empty - 26.5" Stand-alone, overall length, with stock fully extended - 20.25" Stand-alone, overall length, with stock fully collapsed - 5.92 lbs., Stand-alone, empty

GENERAL SPECIFICATIONS - 40mm low velocity - Single-shot, manual action - Rotating locking breech system - Composite polymer Trigger Module - Leaf sight or mechanical quadrant sight, Fire Control Unit (FCU) under development - Flat Dark Earth (FDE) color RECEIVER - Molded composite polymer construction - Automatic ejector for rapid ejection of fired case - Molded stippling for enhanced grip

BARREL - Aluminum barrel with steel and elastomer muzzle protection ring for reduced weight - Barrel swivels both right and left for ease of loading from any firing position and allows use of extended length ammunition STOCK - MIL-STD 1913 accessory rails at the 3, 6, 9 and 12 o’clock positions - Telescoping design of stand-alone stock adapts to fit a variety of operator body sizes, body armor and load bearing equipment - Anodized aluminum construction for durability in Flat Dark Earth (FDE) color

OPERATING CONTROLS - Ambidextrous - Crossbolt safety for fast and easy operator access - Double-action trigger capable of multiple strikes - Trigger offers multiple strike capability to eliminate requirement to open and recock action and allows firing of ammunition with less sensitive or aged primers - Enlarged trigger guard for easier access when wearing gloves MOUNTING - Optimized ergonomic trigger location when mounted using trigger adapters to either the SCAR 16 or SCAR 17 - Dual locking clamp levers provide secure mounting to SCAR 16 or SCAR 17 rifles or to a stand-alone stock assembly - Adds no length to overall weapon when mounted on SCAR 16 or SCAR 17 rifles

PRODUCT

DESIGNATION

DESCRIPTION

98795

FN40GL-S

FN40GL STAND ALONE LAUNCHER

98797

FN40GL-L

FN40GL SCAR 16 LAUNCHER

98799

FN40GL-H

FN40GL SCAR 17 LAUNCHER

98895

FN40GL-S/TM

TRIGGER MODULE ONLY

98897

FN40GL-L/TM

TRIGGER MODULE ONLY

98899

FN40GL-H/TM

TRIGGER MODULE ONLY

98893

FN40GL-S/LS

FN40GL-S/LS LEAF SIGHT OR OPTIONAL ACCESSORIES

TACTICAL

TACTICAL

FN 40GL-S

Optional sight shown not included.

The top-mounted leaf sight is ideal for rapid deployment (optional sight not included)

®

fnhusa.com

83

FN TACTICAL

Ideal for urban and close quarters operations, the P90® Standard comes with an adjustable, non-magnifying white reticle optical sight while the PS90 TR offers three MIL-STD 1913 rails for mounting optional optical sights, tactical lights and lasers. Chambered in the high velocity 5.7x28mm cartridge, both the selective fire and the semi-automatic P90 variants utilize straight blowback operation and fire from a closed bolt for greater accuracy and reliability. The P90’s compact 10.39" cold hammer-forged MIL-SPEC barrel is equipped with an integrated muzzle brake to reduce recoil. A 50-round polymer detachable magazine is standard. The P90’s safety switch is located inside the trigger guard for easy access. Dual magazine latches, cocking handles and an innovative matte black synthetic thumbhole stock with a molded-in sling attachment point help make the P90 fully ambidextrous.

PRODUCT

DESIGNATION

CALIBER

BARREL

OVERALL LENGTH

MAGAZINE

WEIGHT

3818900093

P90 STD SEL. FIRE

5.7x28MM

10.39"

19.88"

50-ROUND

5.8 LBS.

3818900793

P90 STD SEMI-AUTO

5.7x28MM

10.39"

19.88"

50-ROUND

5.8 LBS.

3818900493

P90 TR SEL. FIRE

5.7x28MM

10.39"

19.88"

50-ROUND

5.95 LBS.

3818902220

P90 USG

5.7x28MM

10.39"

19.88"

50-ROUND

5.93 LBS.

GENERAL SPECIFICATIONS - 5.7x28mm - Selective fire or semi-auto only version - Closed bolt, blowback operation - 1:9" twist rate - 50-round magazine capacity RECEIVER - Compact bullpup design - Bottom ejection port

BARREL - Hammer-forged - Hard-chromed bore - Integrated muzzle brake - Matte black oxide finish STOCK - Matte black synthetic thumbhole design with forward handstop - Molded-in rear sling attachment point

OPERATING CONTROLS - Ambidextrous cocking knobs and magazine release latches - Sliding trigger - Safety/selector switch inside trigger guard MAGAZINE - Top-mounted detachable magazine - Translucent polymer magazine body - Cartridge orientation via rear rotating turntable

SIGHTS - Non-magnifying optical sight on P90 Standard models - Three MIL-STD 1913 accessory rails on P90 TR models - Non-magnifying optical sight and two MIL-STD 1913 accessory rails on P90 USG model

TACTICAL

TACTICAL

P90® STANDARD P90® TR / P90® USG

THE SMALL CALIBER PLATFORM WITH ULTIMATE PERFORMANCE.

The FN P90® TR offers three MIL-STD 1913 Rails that accommodate user-supplied optical or electronic red-dot sights

the compact size of the FN P90® platform makes it ideal for VIP Protective details, SWAT entry teams and close quarters combat

®

84

fnhusa.com

85

FN TACTICAL

With pressure switch-activated, front-mounted visible laser modules, the FN P90 Laser Visible (LV) P90 Triple Rail Laser Visible (TR LV) and P90 USG IR (Infrared) give a decisive tactical edge when operating in low-light tactical situations. Chambered in the high velocity 5.7x28mm cartridge, these three selective fire P90 variants utilize straight blowback operation and fire from a closed bolt for greater accuracy and reliability. The P90’s compact 10.39" cold hammer-forged MIL-SPEC barrel is equipped with an integrated muzzle brake to reduce recoil. A 50-round polymer detachable magazine is standard. The P90’s safety switch is located inside the trigger guard for easy access. Dual magazine latches, cocking handles and an innovative synthetic thumbhole stock with a molded-in sling attachment point help make the P90 fully ambidextrous.

PRODUCT

DESIGNATION

CALIBER

BARREL

OVERALL LENGTH

MAGAZINE

WEIGHT

3818900193

P90 LV

5.7x28MM

10.39"

19.88"

50-ROUND

6.1 LBS.

3818900593

P90 TR LV

5.7x28MM

10.39"

19.88"

50-ROUND

6.0 LBS.

3818902230

P90 USG IR

5.7x28MM

10.39"

19.88"

50-ROUND

6.24 LBS.

GENERAL SPECIFICATIONS - 5.7x28mm - Selective fire - Closed bolt, blowback operation - 1:9" twist rate - 50-round magazine capacity RECEIVER - Compact bullpup design - Bottom ejection port

BARREL - Hammer-forged - Hard-chromed bore - Integrated muzzle brake - Matte black oxide finish STOCK - Matte black synthetic thumbhole design with forward handstop - Front mounted laser targeting module - Molded-in rear sling attachment point

OPERATING CONTROLS - Ambidextrous cocking knobs and magazine release latches - Sliding trigger - Safety/selector switch inside trigger guard MAGAZINE - Top mounted detachable magazine - Translucent polymer magazine body - Cartridge orientation via rear rotating turntable

SIGHTS - Non-magnifying optical sight and front mounted visible laser targeting module on P90 LV model - Three MIL-STD 1913 accessory rails and front mounted visible laser targeting module on P90 TR LV model - Non-magnifying optical sight, two MIL-STD 1913 accessory rails and front mounted infrared laser targeting module on P90 USG IR model

TACTICAL

TACTICAL

P90® LV / P90® TR LV P90® USG IR

P90® HEADS UP, SPOT-ON CLOSEQUARTERS TARGET DESIGNATION.

the compact size of the laser equipped FN P90® makes it ideal for VIP Protective details, SWAT entry teams and close quarters combat operations in low-light or no-light environments

The FN P90® TR LV offers a visible laser targeTing module plus three MIL-STD 1913 Rails that accommodate user-supplied optical or electronic red-dot sights

®

86

fnhusa.com

87

FN TACTICAL

F2000 TACTICAL F2000 STANDARD

THE COMPACT BULLPUP WITH NO BULL FIREPOWER. Chambered in 5.56x45mm NATO (223 Rem.), the FN F2000 Series are cutting-edge selective-fire bullpup carbines. The F2000 Standard comes equipped with a 1.6x optical sighting package. The F2000 Tactical offers an integrated MIL-STD 1913 top mounting rail and emergency backup folding sights. Both of the F2000 carbines are gas-operated and use a rotating bolt lockup for reliability and greater accuracy. Both variants have 15.75" cold hammer-forged MIL-SPEC barrels and muzzle brakes. Fired cases are ejected through a forward port away from the operator. 30-round detachable box magazines (DBM) are standard. The fully-ambidextrous polymer stock is available in matte black. An optional tactical fore-end accessory provides three forward MIL-STD 1913 rails for mounting tactical lights and lasers.

Optional RED-DOT REFLEX sight AND TACTICAL FORE-END shown not included

DESIGNATION

CALIBER

BARREL

MAGAZINE

WEIGHT

3488900100

F2000 TACTICAL

5.56x45MM (223 REM.)

15.75"

27.08"

30-ROUND

7.47 LBS.

3488900030

F2000 STD

5.56x45MM (223 REM.)

15.75"

27.08"

30-ROUND

7.93 LBS.

GENERAL SPECIFICATIONS - 5.56x45mm (223 Rem.) - Selective fire - Gas-operated, rotating bolt - 1:7" twist rate - 850 rounds per minute (RPM) cyclic rate of fire RECEIVER - Aircraft-grade aluminum alloy receiver - Bullpup design reduces overall length

BARREL - Hammer forged - Hard chrome bore - Flash hider - Bayonet lug - Non-reflective black oxide finish STOCK - Matte black synthetic ambidextrous thumbhole design - Large buttplate - Molded-in sling attachment points

OPERATING CONTROLS - Left-side charging handle - Selector switch inside trigger guard - Sliding trigger MAGAZINE - Steel magazine body - Compatible with M16-style 20- and 30-round magazines

NEW ITEM

88

OVERALL LENGTH

SIGHTS - 1.6x optical sight package on F2000 Standard model - Top-mounted one-piece MIL-STD 1913 accessory rail and folding back-up iron sights on F2000 Tactical model

TACTICAL

TACTICAL

PRODUCT

The FN F2000 tactical offers a top mounted MIL-STD 1913 Rail for user-supplied optical or electronic red-dot sights

The new Tactical fore-end accessory adapts to any FN F2000 and provides three Mil-Std 1913 rails for mounting tactical lights and lasers (Product NO. 3830500)

On the FN F2000 all Fired cases are ejected through a forward port and away from the operator

®

fnhusa.com

89

For more than a century the legendary reliability and performance of FN carbines has created CARBINES

law enforcement officers alike. Based on their selective fire military and tactical counterparts,

CARBINES

a lasting bond of trust among soldiers and

FN offers a wider variety of semi-automatic carbines than any other manufacturer. FN is the world leader and the brand to demand in semiautomatic carbines.

COMPACT AND CAPABLE CARBINES FROM FN. ®

90

FN CARBINES

REAL WORLD PRODUCTS. REAL WORLD PERFORMANCE.™ www.fnhusa.com 91

FN CARBINES

NEW ITEMS

SCAR™ 16S / SCAR™ 17S

EXPERIENCE THE FN SCAR™ RIFLE FOR YOURSELF. Experience the reliability, accuracy and versatility of the FN SCAR™ 16S and SCAR™ 17S, the semi-auto only versions of the U.S. Special Operations Command’s newest service rifles. The SCAR 16S is chambered in 5.56x45mm NATO (223 Rem.) while the SCAR 17S fires the 7.62x51mm NATO (308 Win.) cartridge. Both the SCAR 16S and 17S feature freefloating, cold hammer-forged MIL-SPEC barrels with hard-chromed bores. Fullyambidextrous operating controls instantly adapt the SCAR S-Series to any user. The receiver-integrated MIL-STD 1913 optical rail plus three accessory rails enable mounting of a wide variety of tactical lights and lasers. The side-folding polymer stock is fully adjustable for comb height and length of pull, and is available in black or USSOCOM Flat Dark Earth.

PRODUCT

DESIGNATION

STOCK COLOR

CALIBER

BARREL

O/A LENGTH

MAGAZINE

WEIGHT

98601

SCAR 16S

FLAT DARK EARTH

5.56x45MM (223 REM.)

16.25"

27.5" TO 37.5"

10-ROUND

7.25 LBS.

98501

SCAR 16S

FLAT DARK EARTH

5.56x45MM (223 REM.)

16.25"

27.5" TO 37.5"

30-ROUND

7.25 LBS.

98621

SCAR 16S

BLACK

5.56x45MM (223 REM.)

16.25"

27.5" TO 37.5"

10-ROUND

7.25 LBS.

98521

SCAR 16S

BLACK

5.56x45MM (223 REM.)

16.25"

27.5" TO 37.5"

30-ROUND

7.25 LBS.

98641

SCAR 17S

FLAT DARK EARTH

7.62x51MM (308 WIN.)

16.25"

28.5" TO 38.5"

10-ROUND

8.00 LBS.

98541

SCAR 17S

FLAT DARK EARTH

7.62x51MM (308 WIN.)

16.25"

28.5" TO 38.5"

30-ROUND

8.00 LBS.

NOT SHOWN

GENERAL SPECIFICATIONS - SCAR 16S - 5.56x45mm NATO (223 Rem.) - SCAR 17S - 7.62x51mm NATO (308 Win.) - Semi-auto only - Short stroke gas piston - Rotating, locking bolt - Composite polymer Trigger Module - Matte black or Flat Dark Earth (FDE) color

92

BARREL - Hammer-forged, chrome-lined steel - Fully free-floating design - Highly-effective muzzle brake STOCK - Telescoping design - Side folding feature provides more compact package - Adjustable cheekpiece - Composite polymer construction with molded-in matte black or FDE color

OPERATING CONTROLS - Ambidextrous safety lever and magazine release - Charging handle may be mounted on right or left side - Enlarged trigger guard for easier access when wearing gloves MAGAZINE - Available with 10-, 20- and 30-round magazine capacity - Steel or aluminum magazine body - Low friction follower - SCAR 16S is compatible with M16/M4 magazines

RECEIVER - Hard-anodized monolithic aluminum receiver - MIL-STD 1913 accessory rails at the 3, 6, 9 and 12 o’clock positions - Adjustable folding front and folding/removable rear back-up iron sights

CARBINES

CARBINES

ONE MAGAZINE, OPERATOR'S MANUAL AND LOCKING DEVICE COME STANDARD.

All SCAR™ 16S and SCAR™ 17S carbines offer multiple MIL-STD 1913 rails for mounting optics, electronic sights, lights and lasers

SCAR™ 16S and SCAR™ 17S carbines offer fullyambidextrous operating controls for ease of use

®

fnhusa.com

93

FN CARBINES

LOCK AND LOAD THE MOST INNOVATIVE CARBINES EVER.

PS90

The PS90 USG offers a non-magnifying black reticle optical sight module while the PS90 TR features three MIL-STD 1913 mounting rails. Chambered in the high velocity 5.7x28mm cartridge, the PS90 utilizes blowback operation and fires from a closed bolt for greater accuracy and reliability. The PS90’s 16.04" cold hammer-forged MIL-SPEC barrel is equipped with an integrated muzzle brake to reduce recoil. Models with 10- or 30-round polymer detachable magazines are available. The PS90’s safety switch is located inside the trigger guard for easy access. Dual magazine latches, cocking handles and an innovative synthetic thumbhole stock with a molded-in sling attachment point help make the PS90 fully ambidextrous.

NEW ITEMS

PRODUCT

DESIGNATION

STOCK COLOR

CALIBER

BARREL

O/A LENGTH

MAGAZINE

WEIGHT

3848950460

PS90 STANDARD

3818950460

PS90 STANDARD

BLACK

5.7x28MM

16.04"

26.23"

30-ROUND

6.28 LBS.

OLIVE DRAB GREEN

5.7x28MM

16.04"

26.23"

30-ROUND

6.28 LBS.

3818950240 3818950260

PS90 USG

OLIVE DRAB GREEN

5.7x28MM

16.04"

26.23"

10-ROUND

6.28 LBS.

PS90 USG

OLIVE DRAB GREEN

5.7x28MM

16.04"

26.23"

30-ROUND

6.28 LBS.

3848950240

PS90 USG

BLACK

5.7x28MM

16.04"

26.23"

10-ROUND

6.28 LBS.

3848950260

PS90 USG

BLACK

5.7x28MM

16.04"

26.23"

30-ROUND

6.28 LBS.

3818950140

PS90 TR

OLIVE DRAB GREEN

5.7x28MM

16.04"

26.23"

10-ROUND

6.39 LBS.

3818950160

PS90 TR

OLIVE DRAB GREEN

5.7x28MM

16.04"

26.23"

30-ROUND

6.39 LBS.

3848950040

PS90 TR

BLACK

5.7x28MM

16.04"

26.23"

10-ROUND

6.39 LBS.

3848950060

PS90 TR

BLACK

5.7x28MM

16.04"

26.23"

30-ROUND

6.39 LBS.

NOT SHOWN

GENERAL SPECIFICATIONS - 5.7x28mm - Semi-auto only - Closed bolt, blowback operation - 1:9" twist rate - 10- or 30-round magazine capacity BARREL - Hammer-forged - Hard-chromed bore - Integrated muzzle brake

94

RECEIVER - Compact bullpup design - Bottom ejection port STOCK - Matte black synthetic thumbhole design with forward handstop - Molded-in rear sling attachment point

OPERATING CONTROLS - Ambidextrous cocking knobs and magazine release latches - Sliding trigger - Safety switch inside trigger guard MAGAZINE - Top mounted detachable magazine - Translucent polymer magazine body - Cartridge orientation via rear rotating turntable

CARBINES

CARBINES

ONE MAGAZINE, OPERATOR'S MANUAL AND LOCKING DEVICE COME STANDARD.

FN PS90 carbines offer fullyambidextrous operating controls for ease of use

FN PS90 TR models offer multiple MIL-Std 1913 rails that accommodate user-supplied optical or electronic red-dot sights

SIGHTS - Three MIL-STD 1913 accessory rails on PS90 TR models - Non-magnifying optical sight on PS90 USG models

®

fnhusa.com

95

FN CARBINES

FS2000 TACTICAL FS2000 STANDARD

THE BEST IN SEMI-AUTO BULLPUP PERFORMANCE. Chambered in 5.56x45mm NATO (223 Rem.), the FN FS2000 Series are semi-auto only variants of the proven F2000 selective-fire bullpup carbines. The FS2000 Standard comes equipped with a 1.6x optical sighting package, while the FS2000 Tactical offers an integrated MIL-STD 1913 top mounting rail and emergency backup folding sights. The FS2000 carbines are gasoperated and use a rotating bolt lockup for reliability and greater accuracy. Both variants have 17.44" cold hammer-forged MIL-SPEC barrels and muzzle brakes. Fired cases are ejected through a forward port away from the operator. Models with 10- or 30-round detachable box magazines (DBM) are available. The polymer stock is fully-ambidextrous. An accessory FS2000 Tactical Fore-end is also available that provides three MIL-STD 1913 forward mounting rails.

Optional RED-DOT REFLEX sight AND TACTICAL FORE-END shown not included

PRODUCT

DESIGNATION

STOCK COLOR

CALIBER

BARREL

O/A LENGTH

MAGAZINE

WEIGHT

3835980260

FS2000 STANDARD

BLACK

5.56x45MM (223 REM.)

17.44"

29.29"

10-ROUND

8.04 LBS.

3835980240

FS2000 STANDARD

BLACK

5.56x45MM (223 REM.)

17.44"

29.29"

30-ROUND

8.04 LBS.

3830000100

FS2000 TACTICAL

OD GREEN

5.56x45MM (223 REM.)

17.44"

29.29"

10-ROUND

7.58 LBS.

3830000000

FS2000 TACTICAL

OD GREEN

5.56x45MM (223 REM.)

17.44"

29.29"

30-ROUND

7.58 LBS.

3835980060

FS2000 TACTICAL

BLACK

5.56x45MM (223 REM.)

17.44"

29.29"

10-ROUND

7.58 LBS.

3835980040

FS2000 TACTICAL

BLACK

5.56x45MM (223 REM.)

17.44"

29.29"

30-ROUND

7.58 LBS.

NOT SHOWN

NEW ITEM

The new Tactical fore-end accessory adapts to any FN Fs2000 and provides three Mil-Std 1913 rails for mounting tactical lights and lasers (Product NO. 3830500)

96

GENERAL SPECIFICATIONS - 5.56x45mm (223 Rem.) - Semi-auto only - Gas-operated, rotating bolt - 1:7" twist rate

BARREL - Hammer-forged - Hard chrome bore - Muzzle brake - Non-reflective black oxide finish

RECEIVER - Aircraft-grade aluminum alloy receiver - Bullpup design reduces overall length

STOCK - Matte black or olive drab synthetic ambidextrous thumbhole design - Large buttplate - Molded-in sling attachment points

OPERATING CONTROLS - Left-side charging handle - Safety switch inside trigger guard - Sliding trigger MAGAZINE - 10- and 30-round capacity - Aluminum magazine body - Compatible with M16-style 20- and 30-round magazines

SIGHTS - 1.6x optical sight package on FS2000 Standard models - Top-mounted one-piece MIL-STD 1913 accessory rail and folding back-up iron sights on FS2000 Tactical models

CARBINES

CARBINES

ONE MAGAZINE, OPERATOR'S MANUAL AND LOCKING DEVICE COME STANDARD.

FN FS2000 carbines offer a fully-ambidextrous stock design for ease of use

FN FS2000 carbines eject fired cases forward and away from the operator

®

fnhusa.com

97

FN AMMUNITION

FN 5.7x28MM SS197SR ammunition is exclusively distributed in the U.S.A. by Federal Cartridge Company.

THE NEW BENCHMARK IN AMMUNITION PERFORMANCE. Fully compatible with a wide variety of FN firearms including the Five-seveN® pistols, PS90 carbines and P90® submachine guns, the 5.7x28mm cartridge has been specifically tailored to excel in several specialized roles.The SS190 Duty round is restricted to law enforcement and military users only. It has been designed to minimize the risk of over-penetration. The L191 Tracer and SB193 subsonic rounds are also available for specialized law enforcement and military applications. The SS195 LF and SS198 LF (Lead Free) are ideal for any situation where lead contamination must be minimized. The SS197SR, exclusively distributed in the U.S.A. by Federal Cartridge Company, is ideally suited for sports and training applications. Blank rounds for training and simulations are also available from FNH USA. All 5.7x28mm restricted ammunition (duty round, tracer, subsonic) is available for law enforcement and military sales only. This ammunition is only released and shipped from a U.S. Customs-controlled bonded warehouse (CBW) upon BATFE and U.S. Customs approval.

PRODUCT

DESIGNATION

TYPE

AVAILABILITY

INTENDED PURPOSE

CASE QTY.

10700012

SS195LF

LEAD FREE

UNRESTRICTED

CIVILIAN/TARGET/SPORTING

2,000

10700004

BLANK

BLANK

COMMERCIALLY RESTRICTED

TRAINING/SIMULATION

500

10700005

DUMMY

TRAINING

UNRESTRICTED

INERT TRAINING ROUND

500

10700000

SS190

DUTY ROUND

GOVERNMENTALLY RESTRICTED

LAW ENFORCEMENT/MILITARY

500

10700001

L191

TRACER

GOVERNMENTALLY RESTRICTED

LAW ENFORCEMENT/MILITARY

500

10700003

SB193

SUBSONIC

GOVERNMENTALLY RESTRICTED

LAW ENFORCEMENT/MILITARY

500

10700021

SS198LF

LEAD FREE

COMMERCIALLY RESTRICTED

LAW ENFORCEMENT/MILITARY

2,000

Distributed in THE USA by FEDERAL PREMIUM AMMUNITION PRODUCT

DESIGNATION

TYPE

AVAILABILITY

INTENDED PURPOSE

CASE QTY.

10700016

SS197SR

SPORTING

UNRESTRICTED

CIVILIAN/TARGET/SPORTING

2,000

Cross-section of the unrestricted lead-free 5.7x28mm cartridges. The hollow point jackets contain a lead free metal core. The primer compound is also lead free, making either round ideal for any location where lead contamination is to be avoided.

98

AMMUNITION

AMMUNITION

Distributed in THE USA by FNH USA

When Loaded with Ss190 duty Ammo, The FN PS90 and P90® are ideal for general patrol, SWAT entry teams, force protection and many other specialized missions

The FN Five-seveN® pistol offers large ammunition capacity, high-velocity and low recoil performance, maiking it ideal for military operations and law enforcement duty

®

fnhusa.com

99

FNH USA ACCESSORIES

DEMAND THE BEST WITH GENUINE FNH USA ACCESSORIES. Never settle for anything less than the quality, reliability and peace of mind that come from owning genuine FNH USA accessories. From spare magazines and barrels to choke tubes and cleaning kits, FNH USA has all your accessory needs covered. q.

a.

b.

c.

d.

r.

e.

n.

s.

o.

f.

g.

h.

i.

j. k.

m. p.

HANDGUN

f. FNP-45, 45 ACP Magazine

k. 5.7x28mm Otis™ Cleaning Kit

o. SLP Choke Tubes – Standard Invector™

a. Five-seveN® USG Magazine

Product No: 47526-2 (10-round - Not shown) Product No: 47456-2 (15-round)

Product No: 3819999997

g. HP-SA, 9mm Magazine

Includes a molded Blade-Tech™ polymer belt holster, double magazine pouch, adjustable belt loops and a yellow polymer training barrel. Product No: 47500 (FNP-9/FNP-40 - Not shown) Product No: 47520 (FNP-45)

Polished stainless steel construction with blue anodized accent identification ring. For use with the FN SLP shotgun and the FN SLP Mark I shotgun with 12 gauge non-backbored barrels only. Choke tubes marked * not for use with steel shot. Product No: 3088929711 (Cylinder) Product No: 3088929712 (Skeet) Product No: 3088929713 (Improved) Product No: 3088929714 (Light Mod.) Product No: 3088929715 (Modified) Product No: 3088929716 (Imp. Mod.) Product No: 3088929717 (Light Full*) Product No: 3088929718 (Full*) Product No: 3088929719 (Extra Full*)

Product No: 3866100320 (10-round) Product No: 3866100030 (20-round - Not shown)

b. FNX-9, 9mm Magazine Product No: 47694-2 (17-round)

FNX-40, 40 S&W Magazine Product No: 47695-2 (14-round - Not shown)

c. FNP-9, 9mm Magazine Product No: 47104 (10-round) Product No: 47103 (16-round - Not shown)

d. FNP-9M, 9mm Magazine Product No: 47009 (10-round) Product No: 47008 (15-round - Not shown)

e. FNP-40, 40 S&W Magazine Product No: 47306 (10-round) Product No: 47305 (14-round - Not shown)

100

Accessories

Accessories

l.

This magazine also fits the HP-SFS. Product No: 3740100393 (10-round) Product No: 3740100493 (13-round - Not shown)

h. HP-SA, 40 S&W Magazine

l. FNP Shooter's Pack

This magazine also fits the HP-SFS. Product No: 3740100293 (10-round)

SHOTGUN

i. Forty-Nine, 9mm Magazine

Product No: 50001 Standard 2-point black nylon sling. Made in USA

Product No: 112056193 (10-round) Product No: 112056493 (16-round - Not shown)

j. Forty-Nine, 40 S&W Magazine Product No: 112056194 (10-round) Product No: 112056394 (14-round - Not shown)

m. EZ Sling™

n. Universal Tactical Sling (3-Point Tactical Sling) Product No: 50002 Black nylon with quick release buckle allows for greater flexibility in firearm retention. Fits most FNH USA firearms. Does not fit PS90/FS2000. Made in USA

p. SLP Choke Tubes – Invector-Plus™ Polished stainless steel construction with blue anodized accent identification ring. Only for use with the 24", 26", 28" and 30" accessory 12 gauge back-bored barrels for the FN SLP. Choke tubes marked * not for use with steel shot.

Product No: 3088929720 (Cylinder) Product No: 3088929721 (Skeet) Product No: 3088929722 (Improved) Product No: 3088929723 (Light Mod.) Product No: 3088929724 (Modified) Product No: 3088929725 (Imp. Mod.) Product No: 3088929726 (Light Full*) Product No: 3088929727 (Full*) Product No: 3088929728 (Extra Full*)

SLP Autoloading Shotgun Barrels Steel construction with matte black finish. For use with the 12 gauge FN SLP shotgun and the FN SLP Mark I shotgun only. Two flexible magazine capacity reducers are included with each barrel. q. Product No: 3088929500 22" SLP non-back-bored barrel with 3" chamber, Weaverstyle cantilever scope mount, adjustable rifle sights, includes one Standard-Invector Improved choke tube.

Product No: 3088929510 (Not shown) 22" SLP barrel with 3" chamber, fully rifled, front bead sight, Weaver-style cantilever scope mount and adjustable rifle sights. Product No: 3088929530 (Not shown) 24" SLP barrel with 3" chamber, vent rib, front bead sight, back-bored, includes one Invector-Plus Modified choke tube. r. Product No: 3088929540 26" SLP barrel with 3" chamber, vent rib, front bead sight, back-bored, includes one Invector-Plus Modified choke tube. Product No: 3088929550 (Not shown) 28" SLP barrel with 3" chamber, vent rib, front bead sight, back-bored, includes one Invector-Plus Modified choke tube. Product No: 3088929560 (Not shown) 30" SLP barrel with 3" chamber, vent rib, front bead sight, back-bored, includes one Invector-Plus Modified choke tube.

s. Tri-Rail Extension Alloy construction with durable matte black finish. Provides three MIL-STD 1913 mounting rails for tactical lights and lasers. Installs without tools over existing magazine tube. Product No: 3088929876 (Fits SLP shotgun - Not shown) Product No: 3088929878 (Fits SLP Mark I shotgun)

®

fnhusa.com

101

FNH USA ACCESSORIES

DEMAND THE BEST WITH GENUINE FNH USA ACCESSORIES. Never settle for anything less than the quality, reliability and peace of mind that come from owning genuine FNH USA accessories. From spare magazines and air compressors to cases and cleaning kits FNH USA has all your accessory needs covered.

q.

f. d.

p. h.

j.

g.

e.

n.

i. c.

b.

k.

FN 303

d. FN M16/M4 Undercarriage Mount

h. Deluxe Fill Tank

a. FN 303 3-Point Tactical Sling with Reducer

Utilized to attach an FN 303 Launcher to M16/M4 rifles. Product No: 48194 (M16) Product No: 48195 (M4)

Product No: 48216 Includes tank (80 cubic feet at 3,000 PSI), boot protector and vinyl mesh cover, deluxe transport handle and valve protector with 2 extra O-rings.

Product No: 48199 Black nylon with quick release buckle allows for greater flexibility in FN 303 Launcher retention. Made in USA

FN 303 2-point Tactical Sling with Reducer Product No: 48198 (Not shown) Standard 2-point black nylon sling. Made in USA

b. Magazine with Cover Clip Product No: 48188 (15-round) FN 303 Launcher magazine with cover clip.

c. FN 303 Air Bottle Reservoir Product No: 48043 Small compressed air bottle that attaches directly to the FN 303 Launcher.

102

l.

e. Tactical Vest Product No: 48211 Nylon/web vest designed to carry extra air bottles, magazines and projectiles. Adjustable straps, one size fits most. Made in USA

f. Bauer Airbank with Transfer System

Standard Fill Tank Product No: 48215 (Not shown) Standard 80 cubic feet, 3,000 psi cylinder with valve.

i. Bauer Gas Air Compressor with DIN/K valve connectors

Product No: 48218 Portable field support compressed air fill system. 7,000 round capable, waterproof, high impact wheeled transport case, ABS housing, 2 fiber wrapped aluminum 4,325 PSI cylinders.

Product No: 48048612 Portable, lightweight three stage compressor with air purification system, fill hose and vibration isolators. 3,000 PSI rating/5,000 PSI maximum working pressure.

g. 10-pack O-rings with Lube

j. Bauer Diesel Air Compressor with DIN/K valve connectors

Product No: 48214 Replacement power tube O-rings with lube, for FN 303 Launcher.

Product No: 48217 Portable, lightweight three stage compressor with air purification system, fill hose and vibration isolators. 3,000 PSI rating/5,000 PSI maximum working pressure.

Accessories

Accessories

a.

m.

Bauer Electric Air Compressor with DIN/K valve connectors Product No: 48600 (Not shown) Portable, lightweight three stage compressor with air purification system, fill hose and vibration isolators. 3,000 PSI rating/5,000 PSI maximum working pressure.

k. Projectile Speed Loader

o.

RIFLE n. TSR XP/PBR/SPR 308 Win. Detachable Box Magazine Product No: 62614-01 (4-round) Fits all FN TSR XP, PBR and SPR rifles with detachable box magazines (DBM) chambered in 308 Winchester.

Product No: 48071 Enables operator to rapidly reload magazines.

o. FNAR 7.62x51mm NATO (308 Win.) Steel Detachable Box Magazine

l. Soft Carrying Case

Product No: 3108929210 (20-round) Product No: 3108929200 (10-round) Product No: 3108929300 (5-round - Not shown)

Product No: 48210 Nylon carrying case for the FN 303 Launcher and accessories. Made in USA

m. Fill Station Adapter Product No: 48153 This allows refill of the FN 303 Launcher Air Bottles from the Standard Fill Tank.

p. 30mm Steel Scope Ring Set Product No: 2172650012 Precision machined as a matching pair from heat-treated 4140 steel alloy. Integrated recoil lug. Each ring has six 8-32 stainless steel TORX® screws and large steel side clamp and clamping nut. Designed for MIL-STD 1913 mounting rails. Optical centerline is 1" above rail surface.

30mm Aluminum Scope Ring Set Product No: 2172650016 (Not shown) Precision machined as a matching pair from 7075 T6 aircraft grade aluminum alloy to help save weight. Integrated recoil lug. Each ring has six 8-32 stainless steel TORX® screws and large steel side clamp and clamping nut. Designed for MIL-STD 1913 mounting rails. Optical centerline is 1" above rail surface.

q. FNH USA Shooter’s Mat Product No: P20300 Five-section folding design, opens to 82" length and 36" width. Olive drab Cordura® nylon shell with closed cell foam padding. Non-slip quilted upper elbow panel. Three quickrelease polymer closure buckles, two accessory/data book pockets, web carry handle and adjustable web shoulder strap with non-slip pad. Imported.

®

fnhusa.com

103

FNH USA ACCESSORIES

DEMAND THE BEST WITH GENUINE FNH USA ACCESSORIES. Never settle for anything less than the quality, reliability and peace of mind that come from owning genuine FNH USA accessories. From spare magazines and slings to cases and cleaning kits, FNH USA has all your accessory needs covered.

a.

k. c. g.

f.

d. e.

b.

i.

j.

PS90/P90®

c. PS90/P90® Barrel Side Rail

f. PS90/P90® Fired Case Collector

h. 5.7x28mm Otis™ Cleaning Kit

a. PS90/P90® MIL-STD 1913 Accessory Rail

Product No: 381999998

Product No: 3819820010 Wire frame with fabric bag. Imported.

Product No: 3819999997

g. PS90/P90® Black Reticle Sight

Product No: 3819999999 (Not shown)

Product No: 3906010119 (30-round) This magazine also fits the F2000, FS2000 and SCAR™ 16.

P90® GemTech™ Sound Suppressor

j. FS2000 3-Point Nylon Tactical Sling

Product No: 3819400120

d. PS90/P90® Sight Adjustment Tool

b. PS90/P90® 5.7x28mm Magazine

Product No: 3058490010

Product No: 3810110093 (50-round) Product No: 3816101050 (30-round) Product No: 3816101040 (10-round)

Accessories

Accessories

h.

e. PS90/P90® 3-Point Tactical Sling with Barrel Attachment Product No: 50003 Black nylon with quick release buckle allows for greater flexibility in firearm retention. Made in USA

Product No: 3817100030 (Sight with screws) Product No: 3817110030 (Sight without screws)

®

PS90/P90 Magazine Pouch

Product No: SP-90 (Not shown)

F2000/FS2000 i. FNC Magazine, 5.56x45mm NATO

Product No: 3830147520 Black nylon with quick release buckle allows greater flexibility in firearm retention. Made in USA

l.

l. FNH USA Fitted Soft Cases Product No: 3830624 (FS2000) Product No: 3810624 (PS90) Black Cordura® nylon outer shell with reinforced corners, padded handle and heavy-duty lockable nylon coil zippers. Main compartment features high-density foam with cutouts for carbine and two magazines. Accessory compartment equipped with web loops plus hook and loop insert for securing smaller items. Heavy-duty shoulder strap with metal snap clips and shoulder pad. Imported.

k. FS2000/F2000 Tactical Fore-End Product No: 3830500 Replacement fore-end with three MIL-STD 1913 rail sections for mounting tactical lights and lasers. Aluminum alloy construction.

®

104

fnhusa.com

105

FNH USA ACCESSORIES

GENUINE SCAR™ ACCESSORIES BY ATK FOR COMMERCIAL AND LAW ENFORCEMENT FN FIREARMS. These FNH USA accessories have been commercialized by ATK. They are publicized by FNH USA for commercial and law enforcement firearms and meet the highest quality standards.

™ a.

d.

i.

f.

®

m.

c. FNH USA Tactical Sling

a. MK 16/SCAR™ 16/SCAR™ 16S Magazine, 5.56x45mm NATO

Product No: 98824 Tan nylon webbing with black metal ladder-lock adjustments and elastic-protected quick-attach metal snap clips. Fits all SCAR models. Made in USA

b. MK 17/SCAR™ 17/SCAR™ 17S Magazine, 7.62x51mm NATO Product No: 98890 20-round, metal body with FDE anodized coating, chrome silicon spring and low-friction follower. Made in USA Product No: 98892 (Not shown) 20-round, metal body with black anodized coating, chrome silicon spring and low-friction follower. Made in USA

j.

g.

e.

SCAR™

Product No: 3146010020 30-round, blued steel body with FDE colored coating and low-friction follower. Imported. Product No: 98880 (Not shown) 30-round, aluminum body with FDE colored coating and low-friction follower. Made in U.S.A.

106

h.

c. b.

MACHINE GUNS

ATK SCAR™ ACCESSORIES

M3 Tripod (M2/M3)

f. Locking Rail Panel—Long

Product No: 3048921009 (Not shown)

REFLEX SIGHTS

Product No: 3668997100 (Not shown)

Product No: 99625 Non-slip polymer construction with patented Rail-Lok integral locking mechanism. For all MIL-STD 1913 and SCAR 6 o’clock rails.

d. FNH USA CRW Sight

M2 Spare Chrome Barrel

g. Locking Rail Panel—Medium

Product No: 1800000001 Fits MIL-STD 1913 and Weaver pattern rails. Advanced reddot reflex sight with rugged alloy body for competition and tactical use.

Product No: 3662009340 (Not shown)

M2 Spare Stellite Barrel Product No: 3662009353 (Not shown)

Product No: 99629 Non-slip polymer construction with patented Rail-Lok integral locking mechanism. For all MIL-STD 1913 and SCAR 3 and 9 o’clock rails.

e. FNH USA ARW Sight

Armorer’s Kit

h. Locking Rail Panel—Short (Set of 2)

Product No: 3618997500 (For FN MINIMI, also supports M249 series - Not shown) Product No: 3608997063 (FN MAG 58, also supports M240 series - Not shown)

Product No: 99627 Non-slip polymer construction with patented Rail-Lok integral locking mechanism. For all MIL-STD 1913 rails. Ideal for use next to rail-mounted accessories.

Product No: 1897851240 Fits MIL-STD 1913 and Weaver pattern rails. Advanced reddot reflex sight with rugged polymer body for competition and tactical use.

Accessories

Accessories

k.

M2 Tool Kit

®

l.

i. Low-Profile Ladder Cover

m. SCAR™ Discreet Rifle Case

Product No: 99642 Molded from lightweight non-slip Santoprene™ polymer. Easily cut for custom fitting. Each covers 18 slots on a MIL-STD 1913 rail.

Product No. 99653 Fits all SCAR 16 and SCAR 17 rifles. Two large compartments with MOLLE webbing for pouches or straps to secure the rifle. Abrasion-resistant 1000 denier Cordura® nylon fabric with closed cell foam padding. Heavy-duty YKK® dual slide zippers and welded steel D-rings with detachable shoulder strap and pad. Made in USA

j. Modular Rail Cover Switch Mount Product No: 99648 Combines MIL-STD 1913 rail cover and an integral, recessed pressure switch mount. Two interchangeable inserts. ™

k. Locking Rail Panel—SCAR Set Product No: 99631 Non-slip polymer construction with patented Rail-Lok integral locking mechanism. For all MIL-STD 1913 rails. The SCAR set includes one long panel and two medium panels.

SCAR™ Double Magazine Pouch Product No: 99632 (Not shown) Single-well design holds two 30-round 5.56x45mm MK 16/SCAR 16/SCAR 16S/F2000/FS2000/M4/M16 magazines. 1000 denier Cordura® nylon construction with elastic webbing keeps magazines secure. Integral MOLLE straps. Made in USA

l. SCAR™ L Single Magazine Pouch Product No: 99633 Holds one 30-round 5.56x45mm MK 16/SCAR 16/SCAR 16S/ F2000/FS2000/M4/M16 magazine. 1000 denier Cordura® nylon construction with plastic interlining. Integral MOLLE straps. Made in USA

®

fnhusa.com

107

FN TRAINING GENERAL INFORMATION

COURSE REGISTRATION

FNH USA ARMORER COURSES

The FNH USA Training Team is committed to providing comprehensive instruction of the highest standard. Firearm instructor, armorer and less lethal instructor/armorer training courses are designed as intensive, hands-on classes for the law enforcement community.

To register for a course, telephone the FNH USA Training Team at (703) 288-1292, Ext. 100 or download the registration form available at www.fnhusa.com. Return the completed form via fax to (703) 288-1730.

Training aids and armorer tools will be provided to the student for classroom use only. Instructional course work and reference materials may be retained by the student.

Instructor courses are not limited to static shooting techniques. Many classes involve long hours and physically demanding activities. Each attendee must be physically capable of jogging short distances and able to perform the strenuous exercises common in tactical operations. Students are advised to wear clothing suitable for indoor and outdoor range activities.

TUITION PAYMENT Tuition due must be paid in full to FNH USA at least 10 days prior to the first day of the course unless specific prior arrangement has been made with FNH USA at the time of registration. Payment may be made by check, money order or credit card (VISA® or MasterCard® only), payable to FNH USA, LLC. Cash payments and department purchase orders for tuition will not be accepted. Send tuition payments to the attention of Soha Eido at the FNH USA Training Team address below.

DRESS

TCR0609: Five-Seven® USG Pistol Armorer Course TCR0610: FNP/FNX Pistol Armorer Course

The Advanced Operator Course is designed to augment the Foundation Operator training and provide lifelike dynamic scenarios in a safe, controlled environment where students can apply their acquired knowledge and new skill sets. This certification allows the student to train and certify persons within their agency as an operator only.

TCR0611: P90® Submachine Gun and PS90 Semi-automatic Carbine Armorer Course

• Prerequisite: Foundation Operator Course

TCR0612: F2000 Submachine Gun and FS2000 Semi-automatic Carbine Armorer Course

• Price: $425 per pupil

TCR0613: FN Belt-Feed Machine Gun Armorer Course

• Certification: Valid for a period of one (1) year

TCR0614: FN Police Shotgun Armorer Course FNH USA LESS LETHAL INSTRUCTOR AND ARMORER COURSES

• Length: 8 hours • Class Size: 15 students maximum

TCR0608 FN Less Lethal Armorer Course

COURSE DESCRIPTIONS AND TOPICS COVERED

• Length: 4 hours

The FNH USA Training Team offers a wide variety of courses for FN product-specific instructor/armorer certification.

• Price: $275 per pupil

The Armorer Course is designed to provide an advanced understanding of administering an FN Less Lethal System inventory (weapons and management of the weapon system). Upon successful completion of the individual course the student is certified as an FN Less Lethal Armorer. This Armorer certification enables the student to properly maintain and manage an internal agency’s armory of FN 303 Launchers. This responsibility includes establishing procedures for conducting light to heavy maintenance, inspections, inventory management, and assisting Foundation Operators with their maintenance, handling, and proper use. This certification is intended to only cover the ability to administer and maintain the weapons and the weapon management system. This tier is not intended to qualify the student to train and/or certify other students for Tier I, Tier II, or Armorer qualifications.

• Class Size: 15 students maximum

• Prerequisite: Foundation Operator Course

• Certification: Valid for a period of one (1) year

• Length: 8 hours

All classes are conducted off-site. The host agency will receive two free slots with every ten tuition paying registered slots. For more information on how to attend a scheduled course or on hosting a particular training course, contact the FNH USA Training Team. PLEASE NOTE: All courses are conducted in English and all students should be able to understand and speak English adequately. Students not able to understand instructions in English may be asked to withdraw for safety considerations. Courses are offered in other languages by special arrangement. Contact the FNH USA Training Team for more information.

Students should wear either BDU or tactical-type pants and comfortable boots that support the ankles for all range and classroom instruction. Clothing suitable for adverse weather conditions is also advised for all range work. Full wraparound eye protection, hearing protection and baseball-style cap are mandatory for all firearms courses and are the student’s responsibility.

ACCOMMODATIONS AND TRAVEL It is the student’s responsibility to provide their travel and hotel accommodations. The FNH USA Training Team will coordinate with the host agency in providing the necessary information to the student.

Tier I: Foundation Operator Course The Foundation Operator Course is designed to provide the user with a fundamental understanding of the FN 303 Launcher, 303P or T4 systems operation, including functional disassembly and reassembly, common malfunction troubleshooting and operation best practices. It is a combination of classroom and actual static target training, and is directed towards novice and continuing operators who are not prepared for higher tier content or who will not be advancing to those tiers. • Prerequisite: None

• Price: $295 per pupil (subject to change) • Class Size: 15 students maximum

FNH USA, LLC. • P.O. BOX 697 • MCLEAN, VA 22101 USA • (703) 288-1292, EXT. 100 • WWW.FNHUSA.COM

108

Tier III: T3 Instructor Development Course The T3 Instructor Development Course (Train-The-Trainer) is designed to teach law enforcement officers, corrections officers and trainers how to develop, implement and assess an internal less lethal program tailored to their agency, region and/or training commission. Candidates will be required to demonstrate quality knowledge of the skill sets associated with the less lethal systems included. The Instructor Development Course further allows instructor trainers to amplify candidate teaching credentials by expanding product awareness, offering consistent validated continuing educational programs, and participation in real-time teaching, mentoring and coaching scenarios. Prerequisites include all of the concepts in Tiers I and II, and the Armorer Course, along with lesson planning education, dynamic training education and advanced scenario response. • Prerequisite: Valid certifications from Foundation Operator Course, Advanced Operator Course and Armorer’s Course

TRAINING

TRAINING

All FNH USA training courses combine elements of practical instruction and theory for an innovative and valuable learning experience. Enrollment in all courses is restricted to active and reserve law enforcement officers and federal agents. Qualified civilian security professionals are eligible for some courses by special arrangement.

Tier II: Advanced Operator Course

FNh USA Training Courses include live fire range activities

FNH USA Instructor courses provide students with knowledge and skills to assist in training at his/her home agency

• Length: 24 hours • Price: $850 per pupil (subject to change) • Class Size: 10 students maximum • Certification: Valid for a period of two (2) years

Full information on all courses is available at fnhusa.com

®

• Certification: Valid for a period of one (1) year

fnhusa.com

109

®

fnhusa.com Military Sales

Law Enforcement Sales

PO Box 896, McLean, VA 22101 USA Phone: (703) 288-3500 Fax: (703) 288-4505 E-Mail: [email protected]

PO Box 697, McLean, VA 22101 USA Phone: (703) 288-1292 Fax: (703) 288-1730 E-Mail: [email protected]

FN products are manufactured in the U.S. by FN Manufacturing, LLC., Columbia, SC and in Belgium by FN Herstal S.A. This catalog represents FN’s product offering for military and law enforcement markets. Photos of U.S. Military personnel are used courtesy of the U.S. Department of Defense. Every reasonable effort has been made to ensure that all product photographs, descriptions and specifications in this catalog are accurate. However, inadvertent errors may occur, and changes in design or materials, due to our continual effort to improve products, may result in some change in specifications before subsequent publications are issued. FN Herstal S.A. reserves the right to modify or change specifications without notice. Some FN products shown in action photos in this catalog may be equipped with user-supplied optional accessories. If you have any questions regarding FN products, please visit our websites or contact us directly.

Copyright ©2009 FNH USA, LLC. All rights reserved. No part of this catalog, including documents, information, photographs, specifications, technical diagrams or any other material may be reproduced, adapted, translated, entered into a database or released to the public, in part or entirely without the prior written permission of FN Herstal S.A. GAC091260/09107