Black Light Led Daily Check Log

THAILAND INDUSTRIAL PROFORMA FORM

BLACK LIGHT DAILY CHECK LOG Approved By J Dolan UV / Black Light Serial Number

Light Meter Serial Number

White Light Meter Serial Number

Black light Meter Serial Number

Location

Date

UV/Black light Intensity Reading ( µw/cm²) (Maximum 8 hours) Start

Time

Finish

Filter Condition

Comment

Inspector

Signature

Time

Note: UV/Black light shall be measured with an UV / Light meter each time the light is turned on, after every 8 hours of operation and at the completion of the job. Standard UV / Black light intensity reading shall be 1000 µw/cm² at 15" from the light source or the distance to be used for inspection . If filters and reflectors are not in good condition ( eg. broken, damaged, etc) shall be immediately replace.

PF-(AU)-[IND]-IN-059.ver1.12.01.2012