An assortment of tools and spare parts to assist in repairing Common Rail
All care has been taken in the compilation of this reference catalogue. DSA assumes no responsibility for incorrect references, descriptions or sizing on products.
All illustrations are not necessarily an exact replica of parts.
Part numbers mentioned may not necessarily be standard stock items.
Our supplier guarantees the quality and manufacture of their articles. They do not guarantee compensation for any other damages or charges. Defects or short supply of goods must be reported to our supplier within 5 days of receipt of goods. Their guarantee only covers the replacement of defective goods. They do not accept the return of goods that have been incorrectly ordered.
Page T2
To Order Call: 1800 331 277
Reamers & Millers
Page T4
Electronic Equipment
Page T7
Clamps
Page T9
Wrenches
Page T12
Test Adaptors
Page T20
Pullers
Page T23
Couplings
Page T29
Brackets, Vices, Bearings
Page T31
Other Tools / Parts
Page T34
Kits
Page T54
Notes
Page T85
DIESEL SYSTEMS AUSTRALIA PageT3 T3 Page
Bosch (15mm) Flat Reamer
CR 37-15
Flat reamer for cleaning the internal seat of the engine where the flat Common Rail Piezo Bosch nozzle holders lie.
Could use in place of;
In Kit: CR 37-02
Daily (19mm) Conical Reamer
CR 37-16
Conical reamer for cleaning the internal seat of the engine where the conical Common Rail Daily nozzle holders lie
Could use in place of;
In Kit: CR 37-02
Delphi (17mm) Flat Reamer
CR 37-17
Flat reamer for cleaning the internal seat of the engine where the flat common rail Delphi nozzle holders lie.
Could use in place of;
In Kit: CR 37-01
Audi / VW (18mm) Conical Reamer
CR 37-18
Conical reamer for cleaning the internal seat of the engine where injector-pump Audi and Volkswagen lie.
Could use in place of;
In Kit: CR 37-02
Page T4
To Order Call: 1800 331 277
CR 37-19
Bosch (19mm) Flat Reamer
Could use in place of;
Flat reamer for cleaning the internal seat of the engine where the flat common rail Bosch nozzle holders lie.
In Kit: CR 37-01
CR 37-19A
Mercedes (19mm) Flat Reamer
Could use in place of;
Flat reamer for cleaning the internal seat of the engine where the common rail nozzle holders with step lie. For Nozzle Holders like Mercedes.
In Kit: CR 37-01
CR 37-21 Could use in place of;
Bosch (21mm) Conical Reamer Flat reamer for cleaning the internal seat of the engine where the conical Bosch common rail nozzle holders lie.
In Kit: CR 37-01
CR 37-21A
Bosch (21mm) Flat Reamer
Could use in place of;
Flat reamer for cleaning the internal seat of the engine where the Tector Bosch common rail nozzle holders lie.
In Kit: CR 37-02
DIESEL SYSTEMS AUSTRALIA Page T5
Universal Pin
CR 37-0P
Universal pin for holding the three reamers.
Could use in place of;
In Kit: CR 37-01
Page T6
To Order Call: 1800 331 277
EE 00-01
Ultrasonic Cleaning Tank
Could use in place of;
Ultrasonic cleaning tank for rotative pumps and turbo devices.
Vat capacity: 3.5L U/S Power: 120/240 Watt With heating power. EE 01-01
Ultrasonic Cleaning Tank
Could use in place of;
Ultrasonic cleaning tank for rotative pumps and turbo devices.
Vat capacity: 6L U/S Power: 120/240 Watt With heating power. EE 02-01
Ultrasonic Cleaning Tank
Could use in place of;
Ultrasonic cleaning tank for rotative pumps and turbo devices.
Vat capacity: 14L U/S Power: 240/480 Watt With heating power. EE 03-01 Could use in place of;
Multifrequency Cleaning Tank Ultrasonic cleaning tank for rotative pumps and turbo devices.
Vat capacity: 14L U/S Power: 200 Watt With heating power.
DIESEL SYSTEMS AUSTRALIA Page T7
Nozzle Holder Tester Tester for checking Bosch, Delphi, Siemens and Denso, Electromagnetic (Bobbin) or Piezoelectric (Piezo) common rail nozzle holders.
CR 134-13 Could use in place of;
Diagnostic Tool Kit
CR 134-278
This kit allows you to check the pressure of common rail pumps (CP1, CP3, Delphi and Siemens) without dismounting the pump from the engine.
Could use in place of;
Force Pickup
CR 313-CELL
Force pick up with digital force indicator.
Could use in place of; 0 986 612 997
Measures: 0 to 2500kg.
Use with: CR 313-CR
Page T8
To Order Call: 1800 331 277
CR 122-01
Universal Clamp
Could use in place of; 0 986 612 786
Universal retaining clamp for mounting and dismounting common rail injectors with opening of 11, 12, 13 and 19mm. For Bosch and Delphi injectors.
CR 122-02
Universal Clamp for Volvo, Ducato, BMW Injectors
Could use in place of;
Universal retaining clamp for mounting and dismounting common rail injectors with opening of 14, 16 and 20mm.
CR 122-03
Universal Clamp
Could use in place of;
Universal retaining clamp for mounting and dismounting common rail injectors with opening of 15, 17, 18 and 22mm.
CR 309-02
MAN Clamp
Could use in place of;
Tester clamp to be used to check the operating and the flow of the common rail MAN nozzle holder (with simulator or hand injector tester.) For Premium MAN 646, Common Rail bus, Diam. 29mm. Use with: CR 134-01.
DIESEL SYSTEMS AUSTRALIA Page T9
Renault Clamp
CR 309-04A
Tester clamp to be used to check the operating and the flow of the common rail Renault nozzle holder (with simulator or hand injector tester.)
Could use in place of;
For Premium 420 C.V. Renault, Common Rail bus, Diam. 32mm. Use with: CR 134-01. New Tector and Eurocargo Clamp
CR 309-05N
Tester clamp to be used to check the operating and the flow of the common rail Tector nozzle holder (with simulator or hand injector tester).
Could use in place of;
With Quick Connection Use with: CR 134-01.
Denso Clamp
CR 309-06
Tester clamp to be used to check the operating and the flow of the common rail Denso nozzle holder (with simulator or hand injector tester.)
Could use in place of;
Diam. 27mm. Use with: CR 134-01.
CR 309-07
Denso Clamp Tester clamp to be used to check the operating and the flow of the common rail Denso nozzle holder (with simulator or hand injector tester.)
Could use in place of;
Diam. 23.5mm Use with: CR 134-01.
Page T10
To Order Call: 1800 331 277
CR 309-08 Could use in place of;
MAN Clamp Tester clamp to be used to check the operating and the flow of the common rail MAN nozzle holder (with simulator or hand injector tester.) For Premium MAN 646, Common Rail bus, Diam. 26mm. Use with: CR 134-01.
CR 309-09
Volvo, Deutz, Renault Clamp
Could use in place of;
Tester clamp to be used to check the operating and the flow of the common rail Volvo, Deutz and Renault Premium 2 Generation nozzle holders (with simulator or hand injector tester). With Quick Connection. Diam. 28mm Use with: CR 134-01.
DIESEL SYSTEMS AUSTRALIA Page T11
CP3 Torx Wrench
CR 468-00
Special Torx wrench for dismounting of Common Rail CP3
Could use in place of;
CP3 Inlet Connection Wrench
CR 482-00
Wrench for inlet connection for CP3 pump.
Could use in place of;
Bosch Nozzle Holder Wrench
CR 483-00
Wrench for mounting and dismounting Bosch common rail nozzle holder ring nut (17x1mm)
Could use in place of; 8120
Hex: 10mm Hole: 6.5mm
Bosch Nozzle Holder Wrench Wrench for mounting and dismounting Bosch common rail nozzle holder ring nut (17x1mm)
CR 483-GR Could use in place of; 0 986 613 630 8120-A
Hex: 10mm Hole: 7.5mm
Page T12
To Order Call: 1800 331 277
CR 483-10TX
Wrench for internal ring-nut CR nozzle holder 3° gen.
Could use in place of;
Wrench for mounting and dismounting internal ring-nut 10mm, torx, Bosch Common Rail nozzleholders 3° generation
CR 498-00
Tector Solenoid Wrench
Could use in place of; 8160-12
Wrench for opening the solenoid of the common rail Tector nozzle holder. (12 sides, 28mm)
CR 491-00 Could use in place of; YDT 220 8119
CR 499-00 Could use in place of;
Delphi Nozzle Holder Wrench Delphi: For Mondeo and Ford Transit with Delphi nozzle holder system. 21mm.
Cap Wrench Cap wrench with 3 holes for dismounting rail Delphi ring nut.
DIESEL SYSTEMS AUSTRALIA
Page T13
Page T13
29mm Nozzle Holder Wrench
CR 500-00
Wrench for dismounting solenoid common rail nozzle holders.
Could use in place of; 8160-29
Hex: 29mm.
30mm Nozzle Holder Wrench
CR 501-00
Wrench for dismounting solenoid common rail nozzle holders.
Could use in place of; 8160-30
Hex: 30mm.
15mm Open Dismounting Wrench
CR 501-CR15
Open wrench with 1/2” connection. The Could use in place of; 1/2” wrench allows the use with Bosch CRI and CRIN.
17mm Open Dismounting Wrench
CR 501-CR17
Open wrench with 1/2” connection. The Could use in place of; 1/2” wrench allows the use with Bosch CRI and CRIN.
To Order Call: 1800 331 277 Page T14
CR 501-CR19
19mm Open Dismounting Wrench
Could use in place of;
Open wrench with 1/2” connection. The 1/2” wrench allows the use with Bosch CRI and CRIN.
CR 501-CR27
27mm Open Dismounting Wrench
Could use in place of;
Open wrench with 1/2” connection. The 1/2” wrench allows the use with Bosch CRI and CRIN.
CR 501-CR29
29mm Open Dismounting Wrench
Could use in place of;
Open wrench with 1/2” connection. The 1/2” wrench allows the use with Bosch CRI and CRIN.
CR 501-CR30
30mm Open Dismounting Wrench
Could use in place of;
Open wrench with 1/2” connection. The 1/2” wrench allows the use with Bosch CRI and CRIN.
DIESEL SYSTEMS AUSTRALIA Page T15
32mm Open Dismounting Wrench
CR 501-CR32
Open wrench with 1/2” connection. The Could use in place of; 1/2” wrench allows the use with Bosch CRI and CRIN.
Page T16
VW Bush Wrench
CR 492-00
Bush wrench for mounting and dismounting the bracket for UIS nozzle holders and pumps.
Could use in place of; 0 986 612 747 T10054 8610-L
Register Wrench for DP200
CR 6408-80A
Register Wrench
Could use in place of; 6408-80A
Restraint Wrench
CR 2885-00
Torque converter fixing wrench with 12mm slide.
Could use in place of; KDEP 2906, 0 986 611 211
To Order Call: 1800 331 277
CR 439-02 Could use in place of;
Female CAT Wrench Wrench for dismounting Caterpillar pump connection. (2S7264 1P3)
CR 448-00
Mercedes MAN Long Wrench
Could use in place of;
Long wrench for Mercedes / MAN with 4 teeth and puller. It allows you to pull out the nozzle holder automatically.
CR 451-00
Mercedes Toothed Wrench
Could use in place of;
Toothed wrench for dismounting Mercedes nozzle holders with electronic adjustment. It avoids further breakages of cables and sensors.
CR 493-00
VP Wrench
Could use in place of;
Toothed wrench for mounting and dismounting the head plunger for VP pumps. It’s shape avoids breakages when utilized
DIESEL SYSTEMS AUSTRALIA Page PageT17 T17
Rover Wrench
CR 494-00
Wrench for mounting and dismounting the nut for Rover injector pumps.
Could use in place of; 8149
To be used with the 4 included pins.
Solenoid Octagonal Wrench
CR 495-00
Octagonal wrench for mounting and dismounting the solenoid for Bosch / Iveco injector pumps.
Could use in place of; 0 986 613 239 8147
Delphi Volvo Wrench
CR 496-00
Wrench for mounting and dismounting the injector pump fixing nut on the new Delphi Volvo 500Hp nozzle holder.
37mm Solenoid Dismounting Wrench
Could use in place of; 8148
CR 502-00 Could use in place of;
37mnm Hex. wrench for dismounting the solenoid on VW and Audi A6 pump injectors.
For pump injectors: 0414 720 029, 0414 720 215
Page T18
To Order Call: 1800 331 277
CR 503-00 Could use in place of;
Nut Dismounting Wrench Wrench for dismounting the nut on VW and Audi A6 pump injectors.
For pump injectors: 0414 720 404.
CR 504-00
Solenoid Dismounting Wrench
Could use in place of;
Wrench for dismounting the solenoid on VW and Audi A6 pump injectors.
For pump injectors: 0414 720 404.
CR 509-00 Could use in place of;
CR 508-00 Could use in place of;
MAN Solenoid Wrench Wrench for opening the solenoid of the common rail MAN nozzle holder (27mm)
Denso Dismounting Wrench Dismounting wrench for internal ringnuts of Denso nozzle holders.
DIESEL SYSTEMS AUSTRALIA Page T19
Scania Test Adaptor
UIT 4-03
Test adaptor to check the injector of EUI / PDE Scania pumps.
Could use in place of; 8126
To be used on all standard pop testers.
Thread: 31 x 1mm
Iveco Test Adaptor
UIT 4-04
Test adaptor to check the injector of EUI / PDE Iveco pumps.
Could use in place of; 8125
To be used on all standard pop testers.
Thread: 28 x 1mm
Volvo Test Adaptor
UIT 4-05
Test adaptor to check the injector of EUI / PDE Volvo pumps.
Could use in place of; 8127
To be used on all standard pop testers.
Thread: 28 x 1mm Transversal Hole
Volvo Test Adaptor
UIT 4-08
Test adaptor to check the injector of EUI / PDE Volvo pumps.
Could use in place of; 8128
To be used on all standard pop testers.
Thread: 31 x 1mm
Page T20
To Order Call: 1800 331 277
UIT 4-09
Caterpillar Test Adaptor
Could use in place of; 8144
Test adaptor to check the injector of EUI / PDE Caterpillar pumps. To be used on all standard pop testers.
Thread: 28 x 1mm
UIT 4-11
Volkswagen Test Adaptor
Could use in place of; 8129
Test adaptor to check the injector of EUI / PDE Volkswagen pumps. To be used on all standard pop testers.
UIT 4-12
Land Rover Test Adaptor
Could use in place of; 8141
Test adaptor to check the injector of EUI / PDE Land Rover pumps. To be used on all standard pop testers.
UIT 4-13 Could use in place of; 8145
Detroit Test Adaptor Test adaptor to check the injector of EUI / PDE Detroit pumps. To be used on all standard pop testers.
DIESEL SYSTEMS AUSTRALIA Page T21
Cummins Test Adaptor
UIT 4-14
Test adaptor to check the injector of EUI / PDE Cummins L10-M11 pumps.
Could use in place of;
To be used on all standard pop testers.
Cummins Test Adaptor
UIT 4-15
Test adaptor to check the injector of EUI / PDE Cummins N14 pumps.
Could use in place of; 8146
To be used on all standard pop testers.
Volvo 520CV Test Adaptor
UIT 4-16
Test adaptor to check the injector of EUI / PDE Volvo 520 CV pumps.
Could use in place of;
To be used on all standard pop testers.
Page T22
To Order Call: 1800 331 277
CR 233-01 Could use in place of;
BMW Puller Pulley Extractor BMW 520 tds and 320D VP M47 with dial 35x2mm. To pull and keep the distribution fixed.
CR 233-02
BMW Puller
Could use in place of;
Pulley Extractor BMW 320 150 CV and 320D VP 130 CV with dial 35x2mm. To pull and keep the distribution fixed.
INJECTOR PULLER
Injector Puller
Could use in place of; 8098
Adjustable Extractor for Common Rail injectors on Fiat, Alfa, Lancia.
CR 247-01
Mercedes Puller
Could use in place of; 0 986 612 728
Puller for Common Rail Mercedes class A injector. No Beater.
Use with: CR 247-BAT.
DIESEL SYSTEMS AUSTRALIA Page PageT23 T23
Iveco Tector Puller Nozzle holder extractor for Common Rail Iveco Tector . With Blow Puller.
IVECO PULLER Could use in place of;
Mercedes Injector Puller
MERC PULLER
Extractor for Common Rail Mercedes injectors . With Blow Puller.
Could use in place of; 0 986 612 727 0 986 612 728 8099-A
Tector Injector Puller
CR 247-02N
Nozzle holder extractor for Common Rail Iveco Tector .
Could use in place of;
No Beater.
Use with: CR 247-BAT.
CR 247-04
Bosch Puller Common Rail nozzle holder puller for Bosch.
Could use in place of;
Thread: 27x1mm.
Page T24
To Order Call: 1800 331 277
CR 247-04A Could use in place of; 8096-A
Internal Puller for Nozzle Holders Puller for common rail nozzle holder.
Size: 17 x 1mm
DOUBLE PULLER
Double Puller
Could use in place of; 8099-M
Sliding hammer puller for Bosch common rail double nozzle holders for Class A Mercedes. It allows you to pull out the nozzle holder fixed bracket.
SPRINTER PULLER Could use in place of; 8099-F
Sprinter Puller Special sliding hammer for dismounting Sprinter injectors. Especially designed to pull out the injector when there is a reduced working space.
OIL SEAL PULLER Could use in place of; 8172
Oil Seal Puller for VP-CP3 Oil seal self-threading puller for VP and CP3 Pumps. It allows you to dismount the oil seals without opening / pulling out the pump.
Size: 25mm
DIESEL SYSTEMS AUSTRALIA Page T25
Delphi Pump Pulley Extractor
PULLEY EXTRACTOR
Pulley extractor for Common Rail Delphi pumps on Kia, Hyundai engines.
Could use in place of;
Eurocargo Blow Puller
CR 247-0S
Common Rail blow puller for Eurocargo.
Could use in place of;
Beater for Puller
CR 247-BAT
Universal beater for puller.
Could use in place of;
Thread 12x1.5mm
Renault and Opel Mavano Pump Puller Pump puller and stroke holding for Renault Espace 2.2 CR and Opel Movano.
Page T26
CR 260-00 Could use in place of; 8161
To Order Call: 1800 331 277
GOV PULLER
Governor Puller for CP3
Could use in place of;
CP3 Common Rail Governor Puller.
RING EXTRACTOR
Nozzle Holder Fibre Ring Extractor
Could use in place of;
Fibre ring extractor for Bosch Nozzle Holders.
COUPLING PULLERS
Universal Pullers for VP Couplings
Could use in place of;
Couple of high resistant pullers for extracting the couplings on 11 kinds of VP pumps.
SIEMENS PULLER
Siemens Puller
Could use in place of;
Puller for Siemens Common Rail Nozzle Holders. 25 x 1mm.
To be used with PE 226-00
DIESEL SYSTEMS AUSTRALIA Page T27
Denso Puller
DENSO PULLER
Puller for Common Rail Denso Nozzle Holders. 25x0.5mm.
Could use in place of;
To be used with PE 226-00.
Fiat, Peugeot, Citroen Puller
CR 247-11
Could use in place of; Nozzle Holder extraction puller to suit Fiat Ulisse, Peugeot 807 and Citroen Evasion . It has 2 adaptable legs to suit the models. Especially designed to pull out the injector when there is a reduced working space.
Fiat Ducato Puller
CR 247-08
Tool to extract the Fiat Ducato 2.2 JTD nozzle holder from the engine.
Could use in place of;
Especially designed to pull out the injector when there is a reduced working space.
Page T28
VW Sliding Hammer Puller
VW PULLER
Sliding hammer puller for VW injector pump.
Could use in place of; 0 986 612 750
To Order Call: 1800 331 277
CR 025-VP
Motoring Coupling Cone for VP and CP3 Pumps.
Could use in place of;
25mm motoring coupling cone for VP and CP3 pumps.
CR 029-VP
VP Motoring Coupling
Could use in place of;
29mm Motoring coupling cone for VP Ford Transit. It allows you to check the pump on the bench without pulling out the original motoring coupling.
CR 103-VP
VP Motoring Coupling
Could use in place of;
44mm Motoring coupling 4 holes cone for John Deere. It allows you to check the pump on the bench without pulling out the original motoring coupling.
CR 130-00
John Deere Motoring Coupling
Could use in place of;
Motoring coupling 4 holes for John Deere. It allows you to check the pump on the bench without pulling out the original motoring coupling.
DIESEL SYSTEMS AUSTRALIA Page T29
Motoring Coupling for Mercedes, Siemens Motoring coupling for testing Mercedes and Siemens common rail pumps on Test Bench.
CR 131-CR8 Could use in place of; 8151
8mm Key, 12mm Tooth. Motoring Coupling for Fiat Multijet Motoring coupling for testing Fiat Multijet common rail pumps on Test Bench.
CR 132-CR9 Could use in place of; 8152
9mm Key, 12mm Tooth.
Page T30
To Order Call: 1800 331 277
VT 000-04A
Delphi Test Bench Flange
Could use in place of;
Flange for test bench to test Delphi pumps with 2 holes.
To be used with VT 003-00 or with original Bosch bracket.
VT 134-0A
Swivel Vice Basement
Could use in place of; 8132
Universal Type Swivel Vice basement with holes for fixing for operative flanges.
VT 134-CR
Swivel Vice for CP Pumps
Could use in place of;
Swivel Vice for dismounting and mounting radial-jet pumps.
VT 000-04C
Delphi Flange Vice
Could use in place of;
Flange for Vice to mount and dismount common rail Delphi pumps. 2 Holes.
To be used with VT 134-CR
DIESEL SYSTEMS AUSTRALIA Page T31
Bracket for CP1 Common Rail Pumps Bracket for dismounting and mounting common rail pumps.
VT 001-00 Could use in place of; 8130
To be used with VT 134-0A.
Adapting Plate for CP3
VT 001-01
Adapting plate for mounting and dismounting CP3 Pumps.
Could use in place of; 8131
To be used with our VT 001-00
Bracket for CP3 Pumps for Test Bench
VT 001-02 Could use in place of;
Bracket with increased thickness to be used on test bench and on normal working surface.
Diameter: 50mm
CP3 Mercedes Bracket with Ring
VT 001-03 Could use in place of;
Bracket with ring for test bench to test common rail CP3 Mercedes pumps.
To be used with VT 003-00 or original Bosch bracket.
Page T32
To Order Call: 1800 331 277
VT 000-04B Could use in place of;
Delphi Flange with Loop Holes Common rail Delphi flange with loop holes.
VT 000-05
VE Opel Flange
Could use in place of; 9478-T
Flange for VE Opel VP44.
VT 003-00
ISO Bosch Bracket
Could use in place of; 1 688 010 124 9680-A
New bracket for Bosch Test Bench ISO 4008-1 normative.
DIESEL SYSTEMS AUSTRALIA Page T33
Nissan Bracket for Test Bench
CR 002-CR
Bracket to mount on the test bench Nissan Dualis common rail pump.
Could use in place of;
Comparator Bearing
CR 006-CR
Comparator bearing with 2 fixing parts for common rail nozzle holders
Could use in place of;
Sizes: 17 and 19mm Used in kit: CR 006-KIT
Digital Millesimal Comparator Digital millesimal comparator, stroke 015mm.
CR 006-MIL Could use in place of;
Used in kit: CR 006-KIT
Injector Positioning Spinning Device Spinning device to allow the right position / seat of the common rail injectors in the engine.
Page T34
CR 34-23 Could use in place of; 0 986 611 481
To Order Call: 1800 331 277
CR 34-06 Could use in place of; 8121 YDT220
CR 128-218
Stroke Device for Delphi Nozzle Holders Stroke device for Delphi nozzle holder during its positioning on the engine.
Dismounting tool for VP Pump— Duratorq
Could use in place of;
Dismounting and mounting tool for VP pumps on Ford Duratorq 2.0, 2.2 and 2.4 engines.
CR 1085-02
Gauge Bearing EDC, VE
Could use in place of; 1 688 130 237
Gauge bearing for VP44.
Thread: 10 x 1mm. .
CR 1088-02
Threaded Pins For Comparator
Could use in place of; 0 986 611 761 KDEP1088-2
Spare threaded pins for comparator terminal.
Thread 2mm and 3mm, length 10mm.
DIESEL SYSTEMS AUSTRALIA Page T35
Steel Brush
CR 34-14
Steel brush for cleaning holes.
Could use in place of;
Brush Head: 25mm.
Lens with Lamp
CR 503-03
To visualize the holding ball valve and all the little parts of the common rail injectors.
Could use in place of;
Enlargement X10.
Adaptor for pressure-Delphi
CR 34-07 Could use in place of;
Connector for the sensor of transfer pressure for common rail Delphi pumps.
Adaptor for pressure-CP3 Connector for the sensor of transfer pressure for common rail CP3 pumps.
Page T36
CR 34-08 Could use in place of;
To Order Call: 1800 331 277
CR 34-09
Rapid connection for CR nozzle holders
Could use in place of;
Rapid connection for all kinds of common rail nozzle holders. Diameter 6.5mm. To be used on test bench with common rail simulator tester.
CR 34-09A
Rapid connection for CR nozzle holders
Could use in place of;
Rapid connection for all kinds of common rail nozzle holders. Diameter 9mm. To be used on test bench with common rail simulator tester.
CR 34-15
Adaptor for pressure-CP1H/CP3
Could use in place of;
Connector for the sensor of transfer pressure for common rail CP1H/CP3 pumps.
CR 34-16
Adaptor for pressure-Siemens
Could use in place of;
Connector for the sensor of transfer pressure for common rail Siemens pumps.
DIESEL SYSTEMS AUSTRALIA Page T37
Adaptor for pressure-Denso
CR 34-17
Connector for the sensor of transfer pressure for common rail Denso pumps.
Could use in place of;
Siemens High Pressure Reduction
CR 34-18 Could use in place of;
Reduction for high pressure pipe on Siemens pumps.
Siemens Pressure Governor Adaptor
CR 34-19 Could use in place of;
Adaptor for pressure governor for Bosch Siemens pumps.
Page T38
Pressure Adaptor Sensor
CR 34-20
Adaptor for sensor of pressure for Bosch Siemens pumps.
Could use in place of;
To Order Call: 1800 331 277
CR 007-20
Gauge 0-10bar
Could use in place of;
Manometer 0-10bar for checking the fuel pressure of common rail.
CR 007-21
Gauge 0-6bar
Could use in place of;
Manometer 0-6bar for checking the fuel pressure of common rail.
CR 34-00
CP1 Connection Inserter
Could use in place of; 0 986 612 200
Pressing in tool for low pressure connection on common rail CP1 high pressure pumps.
CR 34-01
CP1 Iveco Connection Inserter
Could use in place of; 0 986 612 201
Pressing in tool for low pressure connection on common rail CP1 high pressure pumps.
DIESEL SYSTEMS AUSTRALIA Page T39
Renault Connection Inserter
CR 34-02
Pressing in tool for low pressure connection on common rail CP1 high pressure pumps.
Could use in place of; 0 986 612 205
CP Pump Inserter Bracket
CR 34-03
Inserting tool parts kit for the bracket rotary shaft seal on the common rail high pressure CP1 and CP3 pumps.
Could use in place of; 0 986 612 422
Head Cover Screws
CR 34-04
Couple of screws to centre the head cover. For CP1 common rail high pressure pumps.
Could use in place of;
Device for Mounting the O’Ring
CR 34-05
For mounting the o’ring on the pressure control valve with filter on common rail systems.
Page T40
Could use in place of; 0 986 612 787
To Order Call: 1800 331 277
CR 128-219
VP Ford Transit Flywheel Pin
Could use in place of;
Pin for flywheel on Ford Transit VP and common rail.
PI-9045/1
Connector
Could use in place of;
Adaptor for back leak of Bosch, Siemens and Denso nozzle holders.
PI-9045
Connector
Could use in place of;
Adaptor for back leak on nozzle holders.
PI-9044/5A
O’Ring
Could use in place of;
O’ring to suit PI-9045 and PI-9045/1 Fittings.
DIESEL SYSTEMS AUSTRALIA Page T41
4 Way Connection
CMR151
4mm, 4 Way Waste Plastic Connection.
Could use in place of;
3 Way Connection
CMR151/2
4mm, 3 Way Waste Plastic Connection.
Could use in place of;
Connector
CMR151/23
Adaptor for back leak on PSA Siemens nozzle holders.
Could use in place of;
Connector
CMR151/25
Adaptor for back leak on Siemens nozzle holders.
Page T42
Could use in place of;
To Order Call: 1800 331 277
CMR151/29
Connector
Could use in place of;
Adaptor for back leak on Siemens nozzle holders.
CMR151/30
Connector
Could use in place of;
Adaptor for back leak on Delphi nozzle holders.
CMR263
Low Pressure Textile Hose
Could use in place of;
Size: 3.2 x 7 (Pack 50metres)
CMR263/5
Low Pressure Textile Hose
Could use in place of;
Size: 3 x 7 (Pack 20metres)
DIESEL SYSTEMS AUSTRALIA Page T43
Clip
CMR150/13 Could use in place of;
Clip
CMR151/5
Suit 5WS40148-Z Euro 3, 5WS40149-Z euro 4
Could use in place of; 11800-001-012Z
Clip
CMR151/10 Could use in place of;
Suit 5WS40156-4Z class 4, 5WS40156- 11800-001-002Z Z class 5
Page T44
Clip
CMR151/15
Suit 5WS40000-Z
Could use in place of; 11800-001-003Z
To Order Call: 1800 331 277
CMR814 Could use in place of;
Viton O’Ring Suit CP1H (0 440 020 060) Citroen, Peugeot, Ford, Mazda, Kia
CMR991/4
Viton O’Ring
Could use in place of;
Suit CP1S, CP1K Valve 0 928 400 366, 0 928 400 323
CMR914/10
Viton O’Ring
Could use in place of;
Suit Siemens Valve
CMR950/18
Viton O’Ring
Could use in place of;
Suit Siemens Secure Valve
DIESEL SYSTEMS AUSTRALIA Page T45
Viton O’Ring
CMR000/5
Suit Siemens Secure Valve
Could use in place of;
Viton O’Ring
CMR910
Suit Siemens Secure Valve
Could use in place of;
Viton O’Ring
CMR888
DRV on Flaute BMW Bosch Common Rail (0 445 214 030)
Could use in place of;
Viton Linenized Oil Seal
CMR937/5
Suit Siemens & CP3 Size: 32 x 20 x 7mm
Page T46
Could use in place of; F 00R 0P0 890 F 00N 202 338 F 00N 201 618
To Order Call: 1800 331 277
CMR949/35
Viton Oil Seal
Could use in place of; 5ws40273
Suit Siemens Size: 33 x 22 x 7.3mm
CMR937/10
Double Linenized Viton Oil Seal
Could use in place of; F 00N 200 088
Suit CP3 Toyota d4d BH (0 445 010 105,134,113,112) Size: 32 x 20 x 7mm
CMR949
Viton Oil Seal
Could use in place of; 2 440 281 012
Suit CP3 Fuel Pump Size: 18.8 x 10 x 5.2mm
CMR940/10
Viton Oil Seal
Could use in place of; F 00R 0P1 535
Suit CP 3 (0 445 010 043 Volvo) Size: Double Seal
DIESEL SYSTEMS AUSTRALIA Page T47
Viton Linenized Oil Seal Suit Delphi, Ford, Renault, Nissan, Kia, Hyundai
CMR949/5 Could use in place of; 9307-401A
Size: 32 x 20 x 6mm
Viton Oil Seal
CM940/15
Suit Denso HP2
Could use in place of; 097397-0010
Size: 38 x 25 x 6.5mm
Viton Linenized Oil Seal
CMR949/10
Suit Delphi, Ford
Could use in place of; 9307-402A
Size: 33 x 20 x 6mm
Oil Seal
CMR947
Suit Siemens & CP3
Could use in place of; F 00R 0P0 253 F 00N 201 517
Size: 31 x 20 x 7.3mm
Page T48
To Order Call: 1800 331 277
CMR949/15
Viton Linenized Oil Seal
Could use in place of; 9307/408A
Suit Delphi, Ford Size: 34.5 x 22.5 x 6mm
CMR948
Viton Linenized Oil Seal
Could use in place of; F 00R 0P0 669 F 00N 202 337
Suit CP3 Size: 37 x 25 x 7mm
CMR948/6
Viton Linenized Oil Seal
Could use in place of; F 00R 0P0 521
Suit CP3 Size: 36 x 25 x 7.3mm
CMR949/20
Viton Linenized Oil Seal
Could use in place of; 9307-410A 9307-409A
Suit Delphi, Ford Size: 35.5 x 22.5 x 6mm
DIESEL SYSTEMS AUSTRALIA Page T49
Common Rail Bush
CR 1-00 Could use in place of;
Bush Size: 17/19
Common Rail Bush
CR 2-00 Could use in place of;
Bush Size: 20/22
Common Rail Bush
CR 3-00 Could use in place of;
Bush Size: 24/26
Common Rail Bush
CR 4-00 Could use in place of;
Bush CP3 Size: 19x17x17mm
Page T50
To Order Call: 1800 331 277
CR 5-00 Could use in place of;
Common Rail Bush Bush CP3 Size: 22x22x20mm
CR 6-00
Common Rail Bush
Could use in place of;
Bush CP3 Size: 25x30x25mm
CR 7-00
Common Rail Bush
Could use in place of;
Bush CP3 Size: 33x30x25mm
CR 313-CR Could use in place of; 0 986 613 400 0 986 613 500
Tool to Mount and Dismount Nozzle Holders. Tool for mounting and dismounting all kinds of common rail and UI-P nozzle holders
DIESEL SYSTEMS AUSTRALIA Page T51
Plates
CR 313-CR500
Plates to transform original Bosch 0 986 613 400 in common rail.
Could use in place of; 0 986 613 500
In tool kit: CR 313-CR
Common Rail Bush Bush to fix pulverizer to dismount and mount common rail nozzle holders and unit injectors on Volkswagens.
CR 313-CR01 Could use in place of;
Size: 7mm Included in kit: CR 313-CR
Common Rail Bush Bush to fix pulverizer to dismount and mount common rail unit injectors on Volkswagens.
CR 313-CR417 Could use in place of; 0 986 613 417
Size: 7mm with step Included in kit: CR 313-CR
Common Rail Bush Bush to fix pulverizer to dismount and mount common rail nozzle holders and unit injectors.
CR 313-CR02 Could use in place of;
Size: 9mm Included in kit: CR 313-CR
Page T52
To Order Call: 1800 331 277
CR 34-27 Could use in place of; YDT346
Delphi Tappet Rolls Pliers Couple of pliers to push the tappet rolls on common rail Delphi pumps.
CR 134-10BIC
Buretta
Could use in place of;
Buretta for our common rail nozzle holder back leak kits. Suit: CRBLT 341 and CRBLT 13412CR.
DIESEL SYSTEMS AUSTRALIA Page T53
Reamers Kit (Includes 4 Reamers)
CR 37-01
Tool Kit for cleaning the internal side of the engine.
Could use in place of;
For Delphi and Bosch flat and conical Common Rail nozzle holders.
Nozzle Holder Reamer Kit (4 Reamers)
CR 37-02
Tool Kit for cleaning the internal side of the engine.
Could use in place of;
For Bosch, Daily, Audi, Volkswagen, Tector & MAN.
Fiat / Iveco Reamer Tool Kit Reamer tool kit with conical miller and shimming aluminum washers for nozzle holder copper cases on Fiat-Iveco.
Page T54
CR 21-00 Could use in place of; 9000
Fiat / Transit Reamer Tool Kit
CR 21-01
Tool Kit with reamer for nozzle holder copper cases on Fiat Ducato T.D., Fiat Daily, Fiat Croma and Ford Transit.
Could use in place of; 9000-A
To Order Call: 1800 331 277
CR 21-02
Iveco Reamer Tool Kit
Could use in place of;
Reamer tool kit with 5 millers with different diameters for Iveco 115-17, 50NC-90NC and Volvo, MAN.
CR 40-00
Lapping Tool Kit
Could use in place of; 9700-CR
Kit for lapping the seat of the closing valve ball for the common rail injectors. The kit also enables you to rebuild the seat of the conic seat of the closing valve positioned under the common rail injector solenoid.
CR 501-01
Torx Kit
Could use in place of;
Kit of multi usage torx wrench screwdrivers. With 7 torx wrenches to use as wrenches and screwdrivers.
Dimensions from T10 to T40. CR 501-03 Could use in place of;
Cam-Car Kit Kit of Cam-car wrenches, 5 pins.
Dimensions from T10 to T45.
DIESEL SYSTEMS AUSTRALIA Page T55
Comparator Bearing Kit
CR 006-KIT
Comparator bearing with 2 fixing parts for common rail nozzle holders.
Could use in place of;
Lapping Paste Kit
CR 156-KIT
Lapping paste kit to clean injectors. Composed of 3 different grains, 400, 600 & 800 Microns as well as 1 pot of chrome.
Could use in place of;
These pastes are to clean the emerypolishing, while the chrome is for polishing. CR 313-CR
Kit of 3 Bushes Kit of 3 bushes to fix pulverizer to dismount and mount common rail nozzle holders and unit injectors.
Could use in place of;
Sizes: 7mm, 9mm & 7mm with step.
4 Wrench Kit
CR 700-00
Special wrenches to dismount common rail Delphi DFP3 pumps.
Could use in place of;
Sizes: 20mm, 25mm, 30mm, 40mm
Page T56
To Order Call: 1800 331 277
CR 501-CR
Dismounting Wrench Kit (6pcs)
Could use in place of;
Kit composed of 6 open wrenches. The 1/2” hexagon shaped wrench allows the employment with Bosch systems CRI and CRIN.
Sizes: 15,17,19,27,29 and 30mm. CR 514-03 Could use in place of; 8115
Kit of 3 Tools for Stroke BMW 330-320 BMW Stroke holder with double camshaft.
CR 128-22
Tappet Lifters CP3 Kit
Could use in place of; 0 986 612 427 8133
Tappet lifter kit for dismounting CP3 pumps; made up of three tappet lifters.
CR 128-23
Kit for Common Rail Stroke Pins
Could use in place of;
Kit of pins to be used directly on the engine, for the engine pump’s stroke on common rail Renault.
DIESEL SYSTEMS AUSTRALIA Page T57
Adjusting Kit for CP3
CR 128-24
Adjusting tool kit for CP3 pumps; made up of 6 inserting tools.
Could use in place of; 0 986 612 841, 0 986 612 942, 0 986 612 943, 0 986 612 844, 0 986 612 845, 0 986 612 846. 8171
For inserting and positing of the keeping rings.
Inox Anti Magnetic Pliers Kit
CR 34-24
Set of 2 pliers for mounting and dismounting little parts off common rail injectors (eg. Spacers, pointers, balls etc…)
Could use in place of;
CP3 Pump Tool Kit
CR 18-02
Tool Kit equipped for mounting and dismounting bearings for the radial-jet pump.
Could use in place of;
Included in kit are 5 spare bearings.
Tool Kit for CP1 Pumps Tool Kit equipped for mounting and dismounting bearings for the radial-jet pumps.
CR 18-01 Could use in place of;
Included in kit are 5 spare bearings.
Page T58
To Order Call: 1800 331 277
CR 128-25
Kit of mounting sleeves for CP3
Could use in place of; 8173
Kit of mounting sleeves to make easier the mounting operations of OR and shaft on CP3 pumps.
Formed by 7 parts.
CR 26-03
Feeding Kit
Could use in place of;
Couple of connections and plate for Mercedes common rail.
CR 44-00
Fiber Ring Inserter Kit
Could use in place of;
Kit of tools to extract and replace the fibre ring on common rail nozzle holders. The kit comprises of a puller, inserter and a positioning device.
CR 100-00
Holding Ball Power Tester
Could use in place of;
To check the holding ball power of the valve, where there is a seat of the ball on Bosch common rail nozzle holders. Tester is composed of a vacuum tester, a special support.
DIESEL SYSTEMS AUSTRALIA Page T59
Pointers Kit
CRPT-A
Diam: 5.90 mm Thickness: 8.40 - 8.50 mm (11 sizes) Cu: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcst
Could use in place of;
Pointers Kit
CRPT-B
Diam: 5.80 mm Thickness : 8.40 - 8.50 mm (11 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcs
CRPT-C
Pointers Kit Diam: 5.80 mm Thickness: 8.50 - 8.70 mm (21 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 210 pcs
Could use in place of;
CRPT-D
Pointers Kit Diam: 5.90 mm Thickness: 8.50 - 8.70 mm (21 sizes) Cu: each 0.01 mm Box: 10 pcs x thickness Total: 210 pcst
Page T60
Could use in place of;
Could use in place of;
To Order Call: 1800 331 277
CRSP-A
Injector Spacers Kit
Could use in place of;
Diam: 2.25 mm Thickness: 1.14 - 1.25 mm (12 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 120 pcs
CRSP-B
Injector Spacers Kit
Could use in place of;
Diam: 2.25 mm Thickness: 0.95 - 1.13 mm (19 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 190 pcs
CRSP-C
Injector Spacers Kit
Could use in place of;
Diam: 9.20 mm Thickness: 1.11 - 1.47 mm (19 sizes) Cut: each 0.02 mm Box: 10 pcs x thickness Total: 190 pcs
CRSP-D
Injector Spacers Kit
Could use in place of;
Diam: 7.30 mm Thickness: 1.00+1.01 - 1.45 mm (24 sizes) Cut: each 0.02 mm Box: 10 pcs x thickness Total: 240 pcs
DIESEL SYSTEMS AUSTRALIA Page T61
Injector Spacers Kit
CRSP-D
Diam: 5.50 mm Thickness: 1.00+1.01 - 1.45 mm (24 sizes) Cut: each 0.02 mm Box: 10 pcs x thickness Total: 240 pcs
Could use in place of;
Solenoid Washer Kit
CRSW-A
Diam: 23.50 mm Hole: 19.00 mm Thickness: 1.00 - 1.10 mm (11 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcs
Solenoid Washers Kit Diam: 23.50 mm Hole: 19.00 mm Thickness: 0.90 - 1.00 mm (11 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcs
Solenoid Washers Kit Hex: 22.00 mm Hole: 19.00 mm Thickness: 1.00 - 1.10 mm (11 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcs
Page T62
Could use in place of;
CRSW-B Could use in place of;
CRSW-C Could use in place of;
To Order Call: 1800 331 277
CRSW-D
Solenoid Washer Kit
Could use in place of;
Hex: 22.00 mm Hole: 19.00 mm Thickness: 0.90 - 1.00 mm (11 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcs
CRSW-E
Settlement Washers Kit
Could use in place of;
Diam: 15.70 mm Hole: 10.50 mm Thickness: 1.20 - 1.30 mm (11 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcs
CRSW-F
Solenoid Washer Kit
Could use in place of;
Diam: 23.00 mm Hole: 19.50 mm Thickness: 1.34 - 1.76 mm (22 sizes) Cut: each 0.02 mm Box: 10 pcs x thickness Total: 220 pcs
CRSW-G
Solenoid Washer Kit
Could use in place of;
Diam: 23.50 mm Hole: 19.00 mm Thickness: 1.10 - 1.20 mm (11 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcs
DIESEL SYSTEMS AUSTRALIA Page T63
Solenoid Washer Kit Diam: 22.00 mm Hole: 19.00 mm Thickness: 1.30 - 1.40 mm (11 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcs
Could use in place of;
Solenoid Washer Kit
CRSW-I
Diam: 22.00 mm Hole: 18.00 mm Thickness: 1.00 - 1.10 mm (11 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcs
Could use in place of;
Solenoid Washer Kit
CRSW-J
Diam: 22.00 mm Hole: 18.00 mm Thickness: 0.90 - 1.00 mm (11 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcs
Calibration Thickness Kit Diam: 5.50 mm Hole : 3.40 mm Thickness: 1.20 - 1.70 mm (24 sizes) Cut: each 0.02 mm Box: 10 pcs x thickness Total: 240 pcs
Page T64
CRSW-H
Could use in place of;
CRSK-A Could use in place of;
To Order Call: 1800 331 277
CRSK-A5 Could use in place of;
Calibration Thickness Kit Diam: 5.50 mm Hole: 3.40 mm Thickness: 1.20 - 1.70 mm (11 sizes) Cut: each 0.05 mm Box: 10 pcs x thickness Total: 110 pcs
CRSK-B
Calibration Thickness Kit
Could use in place of;
Diam: 5.50 mm Hole: 3.40 mm Thickness: 0.90 - 1.90 mm (21 sizes) Cut: each 0.05 mm Box: 10 pcs x thickness Total: 210 pcs
CRSK-C
Calibration Thickness Kit
Could use in place of;
CRSK-C5 Could use in place of;
Diam: 4.50 mm Hole: 2.00 mm Thickness: 1.20 - 1.70 mm (24 sizes) Cut: each 0.02 mm Box: 10 pcs x thickness Total: 240 pcs
Calibration Thickness Kit Diam: 4.50 mm Hole: 2.00 mm Thickness: 1.20 - 1.70 mm (11 sizes) Cut: each 0.05 mm Box: 10 pcs x thickness Total: 110 pcs
DIESEL SYSTEMS AUSTRALIA Page T65
Calibration Thickness Kit Diam: 4.20 mm Hole: 2.00 mm Thickness: 1.20 - 1.70 mm (24 sizes) Cut: each 0.02 mm Box: 10 pcs x thickness Total: 240 pcs
Calibration Thickness Kit Diam: 4.20 mm Hole: 2.00 mm Thickness: 1.20 - 1.70 mm (11 sizes) Cut: each 0.05 mm Box: 10 pcs x thickness Total: 110 pcs
Calibration Thickness Kit Diam: 5.30 mm Hole: 2.40 mm Thickness: 1.20 - 1.70 mm (24 sizes) Cut: each 0.02 mm Box: 10 pcs x thickness Total: 240 pcs
Calibration Thickness Kit Diam: 5.30 mm Hole: 2.40 mm Thickness: 1.72 - 1.90 mm (10 sizes) Cut: each 0.02 mm Box: 10 pcs x thickness Total: 110 pcs
Page T66
CRSK-D Could use in place of;
CRSK-D5 Could use in place of;
CRSK-E Could use in place of;
CRSK-F Could use in place of;
To Order Call: 1800 331 277
CRSK-G
Calibration Thickness Kit
Could use in place of;
Diam: 6.40 mm Hole: 2.50 mm Thickness: 1.20 - 1.30 mm (11 sizes) Cut: each 0.01 mm Box: 10 pcs x thickness Total: 110 pcs
CRSK-H
Calibration Thickness Kit
Could use in place of;
Diam: 7.70 mm Hole: 4.40 mm Thickness: 0.90 - 1.44 mm (24 sizes) Cut: each 0.02 mm Box: 10 pcs x thickness Total: 240 pcs
CRSK-I
Calibration Thickness Kit
Could use in place of;
Diam: 5.00 mm Hole: 3.00 mm Thickness: 1.00 - 1.20 mm (11 sizes) Cut: each 0.02 mm Box: 10 pcs x thickness Total: 110 pcs
CR 128-20
Mercedes Common Rail Kit
Could use in place of;
For high pressure CP type pumps. Composed of Mercedes bracket, adaptor coupling, 3 fuel connectors and a fuel connector plate.
DIESEL SYSTEMS AUSTRALIA Page T67
Timing Tools Phase Kit Timing tool phase kit to use for adjusting the phase of Fiat multijet 1300-1900 engines. Composed of a couple of tools for blocking the camshaft and a blocking camshaft pin in PMS.
Phase Distribution Chain Timing Tool Kit
CR 128-27 Could use in place of;
CR 128-28 Could use in place of;
Kit composed of two main tools. The first has to be used for the phase procedure with the gear mounted, while the second group has to be used for the phase with the gear dismounted. For Fiat multijet 1300-1900. Renault Timing Tool Kit Kit is composed of a tool for locking the aspiration can shaft, a tool for locking the discharge cam shaft and a cam shaft blocking pin. For Renault 2.2-2.5 Dci.
Fiat Timing Tool Kit This kit is composed of a tool for locking the driveshaft and a camshaft blocking pin. For Daily, Fiat Ducato 2.32.8 CR
Page T68
CR 128-29 Could use in place of;
CR 128-30 Could use in place of;
To Order Call: 1800 331 277
CR 128-32 Could use in place of;
Timing Tool Kit Timing tool kit to suit Renault, Peugeot and Citroen. It is composed of a tool for locking the driveshaft and a cam shaft blocking pin.
CR 128-26
Tool Kit for CR Delphi Pumps
Could use in place of; YDT367, YDT351, YDT354, YDT356, YDT372
Kit for mounting and dismounting the bearing and the seeger on common rail Delphi pumps.
CRBLT 134-12CR
Common Rail Injector Tester
Could use in place of;
Burettes kit to check the back leakage of common rail injectors (including Mercedes) with connections for Bosch, Delphi, Siemens, Denso nozzle holders.
CRBLT 134-ALL
Timing Tools Phase Kit
Could use in place of;
Timing tool phase kit to use for adjusting the phase of Fiat multijet 1300-1900 engines. Composed of a couple of tools for blocking the camshaft and a blocking camshaft pin in PMS.
DIESEL SYSTEMS AUSTRALIA Page T69
Common Rail Injector Tester Burettes kit to check the back leakage of common rail injectors (including Mercedes) directly on the engine.
Denso Back Leak Adaptor Kit A kit of 6 adaptors for back leak of Denso nozzle holders.
CRBLT 341 Could use in place of;
CR 34-25 Could use in place of;
CR 25-CR
Ball Kit Kit of 50 balls to suit common rail injectors.
Could use in place of; F.00V.C05.001
Size 1.34mm.
Phase 2 Ball Kit Kit of 50 balls to suit common rail injectors. Phase 2.
CR 45-CR Could use in place of; F.00V.C05.008
Size 1.34mm. Material: Carbite of silicon.
Page T70
To Order Call: 1800 331 277
CR 128-31
Volkswagen Timing Tool Kit
Could use in place of;
Timing tool kit for Volkswagen, Seat 1, 2, 3cyl. Composed of a tool for locking the driveshaft and a cam shaft blocking pin.
CR 38-00
Wrench Tool Kit for Glow Plugs
Could use in place of;
Wrench tool kit for mounting and dismounting all types of Glow Plugs including Japanese brands. Kit composed of 8 wrenches 8, 9, 10, 12 (4 wrench short set and 4 long set) and 2 adaptors for dynamometric wrench of 1/2" and 3/8.
CR 46-00
False Glow Plug Tool Kit
Could use in place of;
Tool kit of 13 glow plugs to allow compression test on Common Rail engines Fiat, Mercedes, VW, Audi, Renault, Toyota etc
CR 45-00
False Actuator Kit
Could use in place of; YDT 410
The kit has the capability to find actuator faults and mechanical faults on Common Rail pumps of all brands.
DIESEL SYSTEMS AUSTRALIA Page T71
Fuel Pump High Pressure Repair Kit
CMR146 Could use in place of;
PA CP1 K. Suit 0 440 020 088 Mercedes.
Fuel Pump High Pressure Repair Kit
CMR146/4 Could use in place of;
PA CP3. Suit 0 440 020 038 Citroen, Peugeot, ZFord, Mazda, Nissan, Renault.
Fuel Pump High Pressure Repair Kit
CMR146/5 Could use in place of;
PA CP3 Tector. Suit 0 440 020 095 Iveco Eurocargo Tector.
Page T72
DRV Repair Kit
CMR141
Bosch DRV CP1 S + CP1 K.
Could use in place of; F.01M.100.278
To Order Call: 1800 331 277
CMR141/3
DRV Repair Kit
Could use in place of;
Bosch DRV CP1 H. Suit 0 445 010 150 Alfa, Fiat, Lancia
CMR141/4
DRV Repair Kit
Could use in place of;
Bosch DRV CP1 S. Suit 0 281 002 872 Citroen, Peugeot, Suzuki.
CMR141/5
DRV Repair Kit
Could use in place of;
Bosch DRV CP3. Suit 0 928 400 481 Iveco, Eurocargo, Ford Cargo.
CMR124/10
Repair Kit for Bosch System
Could use in place of; F.00V.C66.002, F.00R.J02.176
Suit all Bosch System Injectors.
DIESEL SYSTEMS AUSTRALIA Page PageT73 T73
Repair Kit for Traditional Injector
CMR124/5 Could use in place of; F.00V.C99.176S
Repair Kit for Multijet Injector
CMR124/7 Could use in place of; F.00V.C99.176S
Repair Kit for 0 445 120 012
CMR124/9
Suit Renault Premium Midlum CP2
Could use in place of; F.00V.C99.176S
Repair Kit for 0 445 120 044
CMR170
Suit MAN TGA Engine D28
Page T74
Could use in place of;
To Order Call: 1800 331 277
CMR170/5 Could use in place of;
Repair Kit for 0 445 120 030, 0 445 120 218 Suit MAN TGA Engine D20
CMR144 Could use in place of;
Repair Kit for 0 445 120 007 Suit Iveco Eurocargo 2003 1 Series
CMR144/5
Repair Kit for 0 445 120 054
Could use in place of;
Suit Iveco Eurocargo 2 Series
CMR206
Repair Kit for 0 445 120 020, 0 445 120 019
Could use in place of;
Suit Renault Premium I dci
DIESEL SYSTEMS AUSTRALIA Page PageT75 T75
Repair Kit for 0 445 120 064 Suit Renault Premium II dxi
Repair Kit for Euro 4/5, 4.5/6.7 cc.
CMR208 Could use in place of;
CMR210 Could use in place of;
Suit DAF LF Engine FR/GR
Repair Kit for CP1 S
CMR0096
Suit 0 445 010 008, Alfa Romeo 156/166 2.4 JTD, Fiat 2.4 JTD, Lancia 2.4 JTD
Could use in place of; F.01M.100.275
Repair Kit for CP1 K
CMR096/30
Suit 0 445 010 008, 0 445 010 025, Mercedes Sprinter 2.1/2.2, Vaneo 1.7CDI+ A160/170CDI E/C 200/220 CDI, Iveco Daily
Page T76
Could use in place of; F.01M.100.275S
To Order Call: 1800 331 277
CMR096/32 Could use in place of; F.01M.100.275, F.01M.100,276, F.01M.100.277
CMR096/35 Could use in place of;
Repair Kit for CP1 S Suit 0 445 010 080, 0 445 010 018, 0 446 010 008, Fiat, Iveco, BMW, Citroen, Peugeot, Renault, Ford, Mercedes, Range Rover
Repair Kit for CP1 H Suit 0 445 010 150, 0 445 010 156, Alfa Romeo, Fiat, Lancia, Audi, Tuareg, Opel
CMR096/37
Repair Kit for CP1 H
Could use in place of;
Suit 0 445 010 139, Citroen, Fiat, Lancia, Ford, Land Rover, Peugeot
CMR096/40
Repair Kit for CP1 H
Could use in place of;
Suit 0 445 010 157, Fiat, Lancia, Alfa Romeo, Opel
DIESEL SYSTEMS AUSTRALIA Page PageT77 T77
Repair Kit for CP1 H Suit 0 445 010 171, 0 445 010 154, Audi
Repair Kit for CP2 Suit 0 445 020 012, Renault, Volvo
Could use in place of;
CMR137/5 Could use in place of;
Repair Kit for CP3
CMR137
Suit 0 445 020 007, Case, Iveco Eurocargo Tector, VW, Ford.
Could use in place of;
Repair Kit for CP3
CMR137/2
Suit 0 445 020 030, Hummer, Chevy, GMC
Page T78
CMR096/50
Could use in place of;
To Order Call: 1800 331 277
CMR138 Could use in place of; F.00N.201.973 F.00N.201.974 F.00N.201.975 F.00N.201.976
CMR138/5 Could use in place of; F.00N.201.973 F.00N.201.974 F.00N.201.975 F.00N.201.976
Repair Kit for CP3 Suit 0 445 010 143, BMW, Iveco, Renault, Mercedes
Repair Kit for CP3 Suit 0 445 010 029, VW, Audi, Mercedes
CMR139
Repair Kit for CP3
Could use in place of; F.00N.201.973 F.00N.201.974 F.00N.201.975 F.00N.201.976
Suit 0 445 010 108, BMW 740D
CMR139/3
Repair Kit for CP3
Could use in place of; F.00N.201.973 F.00N.201.974 F.00N.201.975 F.00N.201.976
Suit 0 445 010 045, Mercedes
DIESEL SYSTEMS AUSTRALIA Page PageT79 T79
Repair Kit for CP1 H Suit 0 445 010 171, 0 445 010 154, Audi
Could use in place of; F.00N.201.973 F.00N.201.974 F.00N.201.975 F.00N.201.976
Repair Kit for CP3
CMR139/5
Suit 0 445 020 0075, 0 445 020 082, Renault, BMW, Tuareg, Audi, Hyundai, Kia
Could use in place of; F.00N.201.973 F.00N.201.974 F.00N.201.975 F.00N.201.976
Repair Kit for CP3
CMR139/6
Suit 0 445 010 043, Volvo
Repair Kit for CP3 Suit 0 445 020 018, 0 445 020 023, Man
Page T80
CMR139/4
Could use in place of; F.00N.201.973 F.00N.201.974 F.00N.201.975 F.00N.201.976
CMR183 Could use in place of;
To Order Call: 1800 331 277
CMR185 Could use in place of; F.00N.201.975 F.00N.201.974 F.00N.201.976 F.00N.201.979
CMR186 Could use in place of;
Repair Kit for CP3 Suit 0 445 010 098, 0 445 010 073, 0 445 010 081, 0 445 010 091, 0 445 010 107, 0 445 010 135, 0 445 010 167, 0 445 010 213, Iveco, Fiat, Mazda, BMW, Mercedes, Renault
Repair Kit for CP3 Suit 0 445 010 096, 0 445 010 120, Mercedes
CMR187
Repair Kit for CP3
Could use in place of;
Suit 0 445 010 105, 0 445 010 134, 0 445 010 113, 0 445 010 112, Toyota
CMR189
Repair Kit for CP3
Could use in place of;
Suit 0 445 020 043, Komatsu, Cummins
DIESEL SYSTEMS AUSTRALIA Page PageT81 T81
Repair Kit for Delphi Suit 9044A 013A, Citroen, Ford, Nissan, Renault, Kia, Mercedes
Repair Kit for Siemens Suit 5WS40018-Z, A2C59511805, A2C59511609, Peugeot, Citroen, Renault, Ford
Repair Kit for Siemens Suit 5WS40019-Z, 5WS40163Z, A2C59511600, Peugeot, Citroen, Ford, Volvo
Repair Kit for Siemens Suit 5WS40008-Z, Ford, Citroen, Peugeot, Mazda, Toyota
Page T82
CMR139/7 Could use in place of; 7135-479A
CMR143 Could use in place of; X39-800-300-001Z
CMR143/3 Could use in place of; X39-800-300-020Z
CMR143/5 Could use in place of; X39-800-300-019Z
To Order Call: 1800 331 277
CMR143/6 Could use in place of;
CMR143/8 Could use in place of;
Repair Kit for Siemens Suit 5WS40273, Land Rover, Ford
Repair Kit for Siemens Suit 5WS40157, A2C59511314, Range Rover, Land Rover, Jaguar, Peugeot, Citroen
CMR166/2
Repair Kit for HP0
Could use in place of; 094040-0010
Suit 94000-0055, Mitsubishi
CMR166/3
Repair Kit for HP0
Could use in place of;
Suit 94000-0310, RE501640, RE518423, John Deere
DIESEL SYSTEMS AUSTRALIA Page PageT83 T83
Page T84
Repair Kit for HP3
CMR166
Suit Toyota, Nissan
Could use in place of; 294009-0030
Repair Kit for HP2
CMR166/5
Suit Toyota
Could use in place of; 097490-0010
Repair Kit for HP4
CMR166/4
Suit 294050-0060, RE519597, John Deere
Could use in place of; 294009-0050 294009-0051
To Order Call: 1800 331 277
DIESEL SYSTEMS AUSTRALIA Page T85
DIESEL SYSTEMS AUSTRALIA 3/15B-56 Keys Road, Cheltenham, VICTORIA 3192 AUSTRALIA Phone: 61 (03) 9553 4222 Fax: 61 (03) 9553 4224 E-mail:
[email protected] Web: www.dsa.net.au