H805GPBD 8-Port GPON Board Description
Compiled by Thunder-link.com A leading Professional Huawei GPON Networks Equipment Supplier
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd. Address:
Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China
Website:
http://www.huawei.com
Email:
[email protected]
H805GPBD Board Contents 8.15.4 H805GPBD Board
8.15.4 H805GPBD Board H805GPBD is a 8-port GPON OLT Interface Board. It works with the optical network terminal (ONT) to provide GPON access service.
Feature and Specifications Please refer to "GPON Service Board Comparison".
Parameters Please refer to "Power Consumption and Maximum Frame Size of Boards".
Working Principle
Figure 1 Working principle of the H805GPBD board
The basic working principle of the H805GPBD board is as follows:
The control module loads the board software, controls the running of the board, and manages the board.
The switching module aggregates the signals from eight GPON ports.
The interface module converts between GPON signals and Ethernet packets.
The power module supplies power to other functional modules of the board.
The clock module provides the working clock for other functional modules of the board.
Front Panel Port
For details about supported optical module, see PON Optical Module.
Indicator
Indicator
RUN ALM
Name
Running status indicator
Status
Meaning
Red: blinks
The board enters the APP start phase during the board startup
Green: blinks every 0.25s
The board enters the phase of communication with the control board during its startup
Green: blinks every 1s The board works in the normal state
BSY
0, 1, 2 ...
Orange: blinks
A high-temperature alarm is generated
Red: on
The board is faulty
Port status Green:blinks indicator Green:off
PON port indicator
The board carries services The board carries no service
Green:on
The ONT of the related PON port is online
Green:blinks
The optical module does not take effect
Green:off
The ONT of the related PON port is offline
Parent topic: GPON Service Board