Delete Node Mop

ETHERNET SERVICES MANAGER®

METHOD OF PROCEDURE ESM: DELETING INDIVIDUAL 5150 AND 5305 NETWORK ELEMENTS FROM MAPVIEWS

CIENA PART NUMBER: REVISION DATE: COPYRIGHT CIENA® CORPORATION

LEGAL NOTICES THIS DOCUMENT CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION OF CIENA® CORPORATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE OR DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE, OR SELL ANYTHING THAT IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE, OR USE IN WHOLE OR IN PART WITHOUT THE SPECIFIC WRITTEN AUTHORIZATION OF CIENA CORPORATION IS STRICTLY FORBIDDEN. EVERY EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION IN THIS DOCUMENT IS COMPLETE AND ACCURATE AT THE TIME OF PRINTING; HOWEVER, THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE. COPYRIGHT 2008 CIENA® CORPORATION UNPUBLISHED ALL RIGHTS RESERVED THE MATERIAL CONTAINED IN THIS DOCUMENT IS ALSO PROTECTED BY COPYRIGHT LAWS OF THE UNITED STATES OF AMERICA AND OTHER COUNTRIES. IT MAY NOT BE REPRODUCED OR DISTRIBUTED IN ANY FORM BY ANY MEANS, ALTERED IN ANY FASHION, OR STORED IN A DATA BASE OR RETRIEVAL SYSTEM, WITHOUT EXPRESS WRITTEN PERMISSION OF THE CIENA® CORPORATION.

SECURITY CIENA® CANNOT BE RESPONSIBLE FOR UNAUTHORIZED USE OF EQUIPMENT AND WILL NOT MAKE ALLOWANCE OR CREDIT FOR UNAUTHORIZED USE OR ACCESS.

CONTACTING CIENA® CORPORATE HEADQUARTERS

410-694-5700

WWW.CIENA.COM

1-800 CIENA24 (243-6224) 410-865-4961

E-MAIL: [email protected]

800-CIENA-24-7 (800-243-6224-7) +44-207-012-5508

E-MAIL: [email protected]

800-CIENA-24-7 (800-243-6224-7) +81-3-3248-4743

E-MAIL: [email protected]

410-694-5700

E-MAIL: [email protected]

IN NORTH AMERICA

410-694-5700

E-MAIL: [email protected]

IN EUROPE

+44-207-012-5500 (UK)

E-MAIL: [email protected]

IN ASIA

+81-3-3248-4680 (JAPAN)

E-MAIL: [email protected]

IN LATIN AMERICA

561-620-1925

E-MAIL: [email protected]

877-CIENA-TD (243-6283) OR 410-694-8120

E-MAIL: [email protected]

CUSTOMER TECHNICAL SUPPORT/WARRANTY IN NORTH AMERICA IN EUROPE, MIDDLE EAST AND AFRICA

IN ASIA-PACIFIC SALES AND GENERAL INFORMATION

TRAINING AND DOCUMENTATION TRAINING DOCUMENTATION

877-CIENA-TD (243-6283) OR 410-694-8125

E-MAIL: [email protected]

FOR ADDITIONAL OFFICE LOCATIONS AND PHONE NUMBERS, PLEASE VISIT THE CIENA® WEB SITE AT WWW.CIENA.COM.

DELETE-NETWORK-MOP.DOC.

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 2 OF 14

IMPORTANT: PLEASE READ THIS LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE INSTALLING OR USING CIENA COMMUNICATIONS INC. ("CIENA") SOFTWARE, HARDWARE OR DOCUMENTATION COLLECTIVELY, THE "EQUIPMENT"). BY INSTALLING OR USING THE EQUIPMENT, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. 1. RIGHT TO USE LICENSE; RESTRICTIONS. SUBJECT TO THESE TERMS, AND THE PAYMENT OF ALL APPLICABLE LICENSE FEES, CIENA GRANTS TO YOU, AS END USER, A NON-EXCLUSIVE LICENSE TO USE THE CIENA SOFTWARE (THE "SOFTWARE") IN OBJECT CODE FORM SOLELY IN CONNECTION WITH, AND AS EMBEDDED WITHIN, THE EQUIPMENT,. YOU SHALL HAVE THE RIGHT TO USE THE SOFTWARE SOLELY FOR YOUR OWN INTERNAL USE AND BENEFIT. YOU MAY MAKE ONE COPY OF THE SOFTWARE AND DOCUMENTATION SOLELY FOR BACKUP AND ARCHIVAL PURPOSE, HOWEVER YOU MUST REPRODUCE AND AFFIX ALL COPYRIGHT AND OTHER PROPRIETARY RIGHTS NOTICES THAT APPEAR IN OR ON THE ORIGINAL. YOU MAY NOT, WITHOUT CIENA’S PRIOR WRITTEN CONSENT, (I) SUBLICENSE, ASSIGN, SELL, RENT, LEND, LEASE, TRANSFER OR OTHERWISE DISTRIBUTE THE SOFTWARE; (II) GRANT ANY RIGHTS IN THE SOFTWARE OR DOCUMENTATION NOT EXPRESSLY AUTHORIZED HEREIN; (III) MODIFY THE SOFTWARE NOR PROVIDE ANY THIRD PERSON THE MEANS TO DO THE SAME; (IV) CREATE DERIVATIVE WORKS, TRANSLATE, DISASSEMBLE, RECOMPILE, REVERSE ENGINEER OR ATTEMPT TO OBTAIN THE SOURCE CODE OF THE SOFTWARE IN ANY WAY; OR (V) ALTER, DESTROY, OR OTHERWISE REMOVE ANY PROPRIETARY NOTICES OR LABELS ON OR EMBEDDED WITHIN THE SOFTWARE OR DOCUMENTATION. YOU ACKNOWLEDGE THAT THIS LICENSE IS SUBJECT TO SECTION 365 OF THE U.S. BANKRUPTCY CODE AND REQUIRES CIENA’S CONSENT TO ANY ASSIGNMENT RELATED TO A BANKRUPTCY PROCEEDING. SOLE TITLE TO THE SOFTWARE AND DOCUMENTATION, TO ANY DERIVATIVE WORKS, AND TO ANY ASSOCIATED PATENTS AND COPYRIGHTS, REMAINS WITH CIENA OR ITS LICENSORS. CIENA RESERVES TO ITSELF AND ITS LICENSORS ALL RIGHTS IN THE SOFTWARE AND DOCUMENTATION NOT EXPRESSLY GRANTED TO YOU. YOU SHALL PRESERVE INTACT ANY NOTICE OF COPYRIGHT, TRADEMARK, LOGO, LEGEND OR OTHER NOTICE OF OWNERSHIP FROM ANY ORIGINAL OR COPIES OF THE SOFTWARE OR DOCUMENTATION. 2. AUDIT: UPON CIENA’S REASONABLE REQUEST, BUT NOT MORE FREQUENTLY THAN ANNUALLY WITHOUT REASONABLE CAUSE, YOU SHALL PERMIT CIENA TO AUDIT THE USE OF THE SOFTWARE AT SUCH TIMES AS MAY BE MUTUALLY AGREED UPON TO ENSURE COMPLIANCE WITH THIS AGREEMENT. 3. CONFIDENTIALITY. YOU AGREE THAT YOU WILL RECEIVE CONFIDENTIAL OR PROPRIETARY INFORMATION ("CONFIDENTIAL INFORMATION") IN CONNECTION WITH THE PURCHASE, DEPLOYMENT AND USE OF THE EQUIPMENT. YOU WILL NOT DISCLOSE CONFIDENTIAL INFORMATION TO ANY THIRD PARTY WITHOUT PRIOR WRITTEN CONSENT OF CIENA, WILL USE IT ONLY FOR PURPOSES FOR WHICH IT WAS DISCLOSED, USE YOUR BEST EFFORTS TO PREVENT AND PROTECT THE CONTENTS OF THE SOFTWARE FROM UNAUTHORIZED DISCLOSURE OR USE, AND MUST TREAT IT WITH THE SAME DEGREE OF CARE AS YOU DO YOUR OWN SIMILAR INFORMATION, BUT WITH NO LESS THAN REASONABLE CARE. YOU ACKNOWLEDGE THAT THE DESIGN AND STRUCTURE OF THE SOFTWARE CONSTITUTE TRADE SECRETS AND/OR COPYRIGHTED MATERIALS OF CIENA AND AGREE THAT THE EQUIPMENT IS CONFIDENTIAL INFORMATION FOR PURPOSES OF THIS AGREEMENT. 4. U.S. GOVERNMENT USE. THE SOFTWARE IS PROVIDED TO THE GOVERNMENT ONLY WITH RESTRICTED RIGHTS AND LIMITED USE, DUPLICATION, OR DISCLOSURE BY THE GOVERNMENT IS SUBJECT TO RESTRICTIONS SET FORTH IN FAR SECTIONS 52227-14 AND 52-227-19 OR DFARS SECTION 52.227-7013(C)(1)(II), AS APPLICABLE. THE EQUIPMENT AND ANY ACCOMPANYING TECHNICAL DATA (COLLECTIVELY "MATERIALS") ARE COMMERCIAL WITHIN THE MEANING OF APPLICABLE FEDERAL ACQUISITION REGULATIONS. THESE MATERIALS WERE DEVELOPED FULLY AT PRIVATE EXPENSE. U.S. GOVERNMENT USE OF THE MATERIALS IS RESTRICTED BY THIS AGREEMENT, AND ALL OTHER U.S. GOVERNMENT USE IS PROHIBITED. IN ACCORDANCE WITH FAR 12.212 AND DFAR SUPPLEMENT 227.7202, SOFTWARE DELIVERED TO YOU IS COMMERCIAL COMPUTER SOFTWARE AND THE USE OF THAT SOFTWARE IS FURTHER RESTRICTED BY THIS AGREEMENT. RIGHTS.

DELETE-NETWORK-MOP.DOC.

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 3 OF 14

5. TERM OF LICENSE. THIS LICENSE IS EFFECTIVE UNTIL TERMINATED. CUSTOMER MAY TERMINATE THIS LICENSE AT ANY TIME BY GIVING WRITTEN NOTICE TO CIENA [OR] AND DESTROYING OR ERASING ALL COPIES OF SOFTWARE INCLUDING ANY DOCUMENTATION. CIENA MAY TERMINATE THIS AGREEMENT AND YOUR LICENSE TO THE SOFTWARE IMMEDIATELY BY GIVING YOU WRITTEN NOTICE OF TERMINATION IN THE EVENT THAT EITHER (I) YOU BREACH ANY TERM OR CONDITION OF THIS AGREEMENT OR (II) YOU ARE WOUND UP OTHER THAN VOLUNTARILY FOR THE PURPOSES OF AMALGAMATION OR REORGANIZATION, HAVE A RECEIVER APPOINTED OR ENTER INTO LIQUIDATION OR BANKRUPTCY OR ANALOGOUS PROCESS IN YOUR HOME COUNTRY. TERMINATION SHALL BE WITHOUT PREJUDICE TO ANY OTHER RIGHTS OR REMEDIES CIENA MAY HAVE. IN THE EVENT OF ANY TERMINATION YOU WILL HAVE NO RIGHT TO KEEP OR USE THE SOFTWARE OR ANY COPY OF THE SOFTWARE FOR ANY PURPOSE AND YOU SHALL DESTROY AND ERASE ALL COPIES OF SUCH SOFTWARE IN ITS POSSESSION OR CONTROL, AND FORWARD WRITTEN CERTIFICATION TO CIENA THAT ALL SUCH COPIES OF SOFTWARE HAVE BEEN DESTROYED OR ERASED. 6. COMPLIANCE WITH LAWS. YOU AGREE TO COMPLY WITH ALL APPLICABLE LAWS, INCLUDING ALL IMPORT REGULATIONS, AND TO OBTAIN ALL REQUIRED LICENSES AND PERMITS RELATED TO INSTALLATION AND USE OF EQUIPMENT. SOFTWARE, INCLUDING TECHNICAL DATA, IS SUBJECT TO U.S. EXPORT CONTROL LAWS, INCLUDING THE U.S. EXPORT ADMINISTRATION ACT AND ITS ASSOCIATED REGULATIONS, AND MAY BE SUBJECT TO EXPORT OR IMPORT REGULATIONS IN OTHER COUNTRIES. CUSTOMER AGREES TO COMPLY STRICTLY WITH ALL SUCH REGULATIONS AND ACKNOWLEDGES THAT IT HAS THE RESPONSIBILITY TO OBTAIN LICENSES TO EXPORT, REEXPORT, OR IMPORT SOFTWARE. 7. LIMITATION OF LIABILITY. ANY LIABILITY OF CIENA SHALL BE LIMITED IN THE AGGREGATE TO THE AMOUNTS PAID BY YOU FOR THE SOFTWARE. THIS LIMITATION APPLIES TO ALL CAUSES OF ACTION, INCLUDING WITHOUT LIMITATION BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION AND OTHER TORTS. THE LIMITATIONS OF LIABILITY DESCRIBED IN THIS SECTION ALSO APPLY TO ANY THIRD-PARTY SUPPLIER OF CIENA. NEITHER CIENA NOR ANY OF ITS THIRD-PARTY SUPPLIERS SHALL BE LIABLE FOR ANY INJURY, LOSS OR DAMAGE, WHETHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL INCLUDING WITHOUT LIMITATION ANY LOST PROFITS, CONTRACTS, DATA OR PROGRAMS, AND THE COST OF RECOVERING SUCH DATA OR PROGRAMS, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES IN ADVANCE. 8. GENERAL. CIENA MAY ASSIGN THIS AGREEMENT TO ANY CIENA AFFILIATE OR TO A PURCHASER OF THE INTELLECTUAL PROPERTY AGREEMENT NOR ANY RIGHTS HEREUNDER MAY BE ASSIGNED NOR DUTIES DELEGATED BY EITHER PARTY, AND ANY ATTEMPT TO DO SO WILL BE VOID. THIS AGREEMENT SHALL BE GOVERNED BY THE LAWS OF THE STATE OF MARYLAND (WITHOUT REGARD TO THE CONFLICT OF LAWS PROVISIONS) AND SHALL BE ENFORCEABLE IN THE COURTS OF MARYLAND. THE U.N. CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALE OF GOODS SHALL NOT APPLY HERETO. THIS AGREEMENT CONSTITUTES THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN THE PARTIES RELATING TO THE LICENSE FOR THE SOFTWARE AND SUPERSEDES ALL PROPOSALS, COMMUNICATIONS, PURCHASE ORDERS, AND PRIOR AGREEMENTS, VERBAL OR WRITTEN, BETWEEN THE PARTIES. IF ANY PORTION HEREOF IS FOUND TO BE VOID OR UNENFORCEABLE, THE REMAINING PROVISIONS SHALL REMAIN IN FULL FORCE AND EFFECT.

RIGHTS IN THE SOFTWARE, BUT OTHERWISE NEITHER THIS

DELETE-NETWORK-MOP.DOC.

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 4 OF 14

0.1 TABLE OF CONTENTS 0.1 0.2

Table Of Contents Abbreviations

5 9

1 INTRODUCTION 1.1 Overview 1.2 Document Conventions 1.3 Product Support Information 1.4 Procedure

12 12 12 12 12 END OF TABLE OF CONTENTS

DELETE-NETWORK-MOP.DOC.

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 5 OF 14

PREFACE 1.

DISCLAIMER

PORTIONS OF THIS DOCUMENT ARE INTENDED SOLELY AS AN OUTLINE OF METHODOLOGIES TO BE FOLLOWED IN UPGRADING AND ®

OPERATING CIENA EQUIPMENT. IT IS NOT INTENDED AS A STEP-BY-STEP GUIDE OR A COMPLETE SET OF ALL PROCEDURES NECESSARY AND SUFFICIENT TO COMPLETE AN UPGRADE. WHILE EVERY EFFORT HAS BEEN MADE TO ENSURE THAT THIS DOCUMENT IS COMPLETE AND ACCURATE AT THE TIME OF PRINTING, THE INFORMATION THAT IT CONTAINS IS SUBJECT TO CHANGE. CIENA® IS NOT RESPONSIBLE FOR ANY ADDITIONS TO OR ALTERATIONS OF THE ORIGINAL DOCUMENT. NETWORKS VARY WIDELY IN THEIR CONFIGURATIONS, TOPOLOGIES, AND TRAFFIC CONDITIONS. THIS DOCUMENT IS INTENDED AS A GENERAL GUIDE ONLY. IT HAS NOT BEEN TESTED FOR ALL POSSIBLE APPLICATIONS, AND IT MAY NOT BE COMPLETE OR ACCURATE FOR SOME SITUATIONS. PROCEDURES AND INFORMATION CONTAINED IN THIS DOCUMENT FOR WHICH THIS DISCLAIMER APPLIES ARE PRECEDED BY THE DISCLAIMER BANNER, SHOWN BELOW.

R E F E R T O D I S C L A I ME R I N P R E F A C E ! USERS OF THIS DOCUMENT ARE URGED TO HEED WARNINGS INTERSPERSED THROUGHOUT THE DOCUMENT, SUCH AS TRAFFIC DISRUPTION WARNINGS. 2.

HEALTH & SAFETY

THE HEALTH, SAFETY AND WELFARE OF ENGINEERS AND SUPPORT STAFF ARE OF PARAMOUNT IMPORTANCE TO CIENA®. IMPLEMENTING A SAFE SYSTEM OF WORK WITH SAFE PEOPLE IS AN INTEGRAL COMPONENT OF OUR PROCEDURES AND AN ABSOLUTE REQUIREMENT UNDER THE PROVISIONS OF THE HEALTH & SAFETY AT WORK ACT 1974. CIENA® RECOGNIZES THE IMPORTANCE OF ALL MATTERS OF HEALTH & SAFETY. BY SUITABLY ADDRESSING HEALTH & SAFETY ISSUES FROM THE OUTSET, ENGINEERS AND OPERATIVES ARE ABLE TO IMPLEMENT INSTALLATION CONTRACT SAFELY, SMOOTHLY AND EFFICIENTLY. A COMPREHENSIVE SET OF PROCEDURES EXIST TO CONTROL OUR ACTIVITIES AND DEFINE OUR HEALTH AND SAFETY REQUIREMENTS. THESE ARE RIGOROUSLY ADHERED TO BY ALL CIENA® EMPLOYEES. REFERENCE STATEMENTS RE H&SWA 1974 AND MANAGEMENT OF H&SWA REGULATIONS 1998. PRIOR TO COMMENCEMENT OF INSTALLATION SUPPLIER REPRESENTATIVES NEED TO BE AWARE OF ANY SITE SPECIFIC RISK ASSESSMENTS / PROCESSES / EVACUATION PROCEDURES ETC. 3.

COMPLIANCE INFORMATION

PART 15 OF THE FEDERAL COMMUNICATIONS COMMISSION (FCC): INTERFERENCE EVERY EFFORT HAS BEEN MADE TO ENSURE THAT THIS EQUIPMENT IS DESIGNED TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL FCC RULES. EQUIPMENT LIMITATIONS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT, IF NOT INSTALLED AND USED PROPERLY AND IN ACCORDANCE WITH GUIDELINES ESTABLISHED BY CIENA® CORPORATION, MAY CAUSE INTERFERENCE WITH OTHER COMMUNICATIONS EQUIPMENT. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL ENVIRONMENT MAY CAUSE INTERFERENCE, AND IT IS THE RESPONSIBILITY OF THE USER TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY CIENA® CORPORATION COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. DEVICE, AS DESCRIBED IN THE

INDUSTRY CANADA NOTICE WARNING: THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME NMB-003 DU CANADA. EN55022 CLASS A NOTICE WARNING: THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT, THIS PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES. FOOD AND DRUG ADMINISTRATION (FDA) LASER SAFETY WARNING THIS PRODUCT CONTAINS A LASER DIODE. CIENA® CORPORATION STRONGLY RECOMMENDS THAT USERS, MAINTENANCE, AND SERVICE PERSONNEL COMPLY WITH THE FOLLOWING STANDARDS AND REGULATIONS IN THE DESIGN, MODIFICATION, OPERATION, MAINTENANCE, AND SERVICE OF LASERS AND FIBER-OPTIC DEVICES: JURISDICTION FEDERAL, US DELETE-NETWORK-MOP.DOC.

TYPE REGULATIONS

TITLE FDA 21 CFR 1040.10/.11

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 6 OF 14

FEDERAL, US

GUIDELINES

OSHA

UNITED STATES

STANDARD

ANSI Z136 SERIES

INTERNATIONAL

STANDARD

IEC 60825 SERIES

EUROPEAN

STANDARD

EN-60825-1 SERIES

IT IS FURTHER RECOMMENDED THAT THE OWNER OF THIS EQUIPMENT DETERMINE AND ENSURE CONFORMANCE WITH ANY SPECIFIC AND APPLICABLE LOCAL REGULATIONS.

DANGER:

INVISIBLE LASER RADIATION AVOID EXPOSURE TO BEAM DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CLASS 1M LASER PRODUCT NOTICE THE CIENA CORPORATION COREDIRECTOR, CN 4200 AND CORESTREAM REGIONAL PLATFORM WHEN OPERATING NORMALLY WITH ALL DOORS AND ACCESS COVERS INSTALLED, ALL ENERGIZED FIBER CABLING CONNECTED, AND PROTECTIVE CAPS/COVERS INSTALLED ON ALL UNUSED OPTICAL CONNECTORS IS A CLASS 1M LASER PRODUCT AS IDENTIFIED BY US FDA21CFR1040.10/.11; CLASS 1M LASER PRODUCT AS DEFINED BY IEC 60825-1:1993 + A1:1997 + A2:2001 AND EN 60825-1:1994 + A11:1996 + A2:2001; AND OFCS SG1 AS DEFINED BY ANSI Z136.1/.2/. ENVIRONMENTAL IMPACT STATEMENT CIENA® EQUIPMENT CONTAINS NO HAZARDOUS MATERIALS AS DEFINED BY THE UNITED STATES ENVIRONMENTAL PROTECTION AGENCY (USEPA). CIENA® RECOMMENDS THAT ALL FAILED PRODUCTS BE RETURNED TO CIENA® FOR FAILURE ANALYSIS AND PROPER DISPOSAL. RESTRICTED ACCESS LOCATION THIS EQUIPMENT IS INTENDED FOR INSTALLATION IN A RESTRICTED ACCESS LOCATION. BONDING AND GROUNDING THIS EQUIPMENT IS SUITABLE FOR INSTALLATION IN NETWORK TELECOMMUNICATION FACILITIES. THIS EQUIPMENT IS SUITABLE FOR INSTALLATION AS PART OF THE COMMON BONDING NETWORK. TOXIC EMISSIONS CIENA® EQUIPMENT RELEASES NO TOXIC EMISSIONS. TELCORDIA DOCUMENT STANDARDS THE FORMAT AND STRUCTURE OF THIS DOCUMENT IS DERIVED FROM THE TELCORDIA GENERIC REQUIREMENTS FOR SUPPLIERPROVIDED DOCUMENTATION, GR-454-CORE. AUDIENCE THIS SOFTWARE RELEASE DOCUMENT IS INTENDED FOR INDIVIDUALS WHO INSTALL, TEST, AND MAINTAIN THE COREDIRECTOR PLATFORM. 4. • •

• • 5.

TRADEMARK ACKNOWLEDGEMENTS CIENA® IS A REGISTERED TRADEMARK OF CIENA CORPORATION. SUN, SUN MICROSYSTEMS, JAVA, JAVA SECURE SOCKET EXTENSION, AND JAVAX ARE TRADEMARKS OR REGISTERED TRADEMARKS OF SUN MICROSYSTEMS, INC. IN THE U.S. OR OTHER COUNTRIES. THIS PRODUCT INCLUDES CODE LICENSED FROM RSA DATA SECURITY. UNIX® IS A REGISTERED TRADEMARK LICENSED EXCLUSIVELY THROUGH X/OPEN COMPANY, LTD. WINDOWS® 95/98/2000/XP ARE REGISTERED TRADEMARKS OF THE MICROSOFT CORPORATION. RELEASE HISTORY

THE FOLLOWING INFORMATION LISTS THE PRINTING HISTORY OF THIS DOCUMENT.

DELETE-NETWORK-MOP.DOC.

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 7 OF 14

REVISION

DATE

AUTHOR

DESCRIPTION

END OF PREFACE.

DELETE-NETWORK-MOP.DOC.

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 8 OF 14

0.2 ABBREVIATIONS THE FOLLOWING ABBREVIATIONS APPEAR WITHIN THIS DOCUMENT. 10G ADM AINS AIS ALS ANSI

EQUIVALENT TO STM-64 ADD DROP MULTIPLEXER AUTOMATIC IN-SERVICE ALARM INDICATION SIGNAL AUTOMATIC LASER SHUTDOWN AMERICAN NATIONAL STANDARDS INSTITUTE APS AUTOMATIC PROTECTION SWITCH APSD AUTO POWER SHUTDOWN ASCII AMERICAN STANDARD CODE FOR INFORMATION INTERCHANGE AU-N ADMINISTRATIVE UNIT N BBE BIT BLOCK ERROR BER BIT ERROR RATE BITS BUILT IN TIMING SOURCE CD COMPACT DISK CD COREDIRECTOR CDD COREDIRECTOR DESIGNER CARRIER ETHERNET SERVICE CES CESD CARRIER ETHERNET SERVICE DELIVERY CHA. CHANNEL CLI COMMAND LINE INTERFACE CM CONTROL MODULE CN4200 CIENA’S FLEXSELECT ADVANCED SERVICES PLATFORM CN 5150 CIENA CESD SWITCH CN 3960 CIENA CESD SWITCH CIENA CESD SWITCH CN 5305 CNMP CUSTOMER NETWORK MANAGEMENT PORTAL CPE CUSTOMER PREMISES EQUIPMENT CSD CORE SWITCHING DIVISION CSM CORE SWITCHING MANAGER CSR CORESTREAM PLATFORM REGIONAL SOLUTION CTD CORE TRANSPORT DIVISION CTM CORE TRANSPORT MANAGER CTP CONNECTION TERMINATION POINT CWDM COARSE DENSE WAVELENGTH DIVISION MULTIPLEXING DB DECIBEL DCC DATA COMMUNICATIONS CHANNEL DCM DISPERSION COMPENSATION MODULE DCN DATA COMMUNICATIONS NETWORK DCP DOCUMENT CHANGE PACKAGE DDTS DOCUMENTED DEFAULT TRACING SYSTEM (FAULT HANDLING & MODIFICATION APPLICATION) DPM DIGITAL POWER METER DTL DESIGNATED TRANSIT LIST DWDM DENSE WAVELENGTH DIVISION MULTIPLEXING DELETE-NETWORK-MOP.DOC.

DYNAMIC WAVELENGTH ROUTER EMBEDDED COMMUNICATION CHANNEL ELECTRICAL ETHERNET 1, (ELECTRICAL ETHERNET 1GBIT/SE.) EE1 ETHERNET OVER E1 (CONVERSION FROM/TO 10BASET TO/FROM E1) EMS ELEMENT MANAGEMENT SYSTEM EN EUROPEAN NORMS EPL ETHERNET PRIVATE LINE EPPG ETHERNET PPG ES ERROR SECONDS ESCON ENTERPRISE SYSTEMS CONNECTIONS (IBM STANDARD) ESIS END SYSTEM - INTERMEDIATE SYSTEM ESLM ETHERNET SERVICES LINE MODULE (NEW NAME FOR PACKET LINE MODULE PALM) ESM ETHERNER SERVICES MANAGER ETSI EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE EVPL ETHERNET VIRTUAL PRIVATE LINE F10-A CN4200 F10 MODULE - AGGREGATOR F10-T CN4200 F10 MODULE – TRANSPONDER FC FIBER CHANNEL FCC FEDERAL COMMUNICATIONS COMMISSIONS FDA FOOD AND DRUG ADMINISTRATION FE FAR-END FEC FORWARD ERROR CORRECTION FICON FIBRE CONNECTIVITY (IBM STANDARD) FSB FIELD SERVICE BULLETIN FSLM FLEXSELECT LINE MODULES FTP FILE TRANSFER PROTOCOL GA GIGABIT ADAPTATION GBE GIGABIT ETHERNET GCC GENERAL COMMUNICATION CHANNEL GDS-OADM GEOGRAPHIC DIVERSE SELECT OPTICAL ADD DROP MULTIPLEXER GELM GIGABIT ETHERNET LINE MODULE GFP GENERIC FRAMING PROCEDURE GNE GATEWAY NETWORK ELEMENT GR GEOGRAPHIC REDUNDANCY GUI GRAPHICAL USER INTERFACE HLSD HIGH LEVEL SYSTEM DESIGN HRD HARDWARE REVISION DOCUMENT HTTP HYPERTEXT TRANSFER PROTOCOL ID IDENTIFICATION IEC INTERNATIONAL ELECTRO-TECHNICAL COMMISSION IEEE INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS IFM INTERFACE MODULE ILA INTERMEDIATE LINE AMPLIFIER DWR ECC EE1

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 9 OF 14

INM INMS IP ISIS ISNR ITU J0 J1 LAG LAN LAP-D LCAS LCP LDAP LM16 LM2 LM8 LOP LOS LX M3S M6S MC MIB MOP MS MSM MSP MUX N/A NAL NBI NC NCP NCS NDP NE NFPA NOC NSA NTP OAF OAM&P OAM&P

INTEGRATED NETWORK MANAGEMENT INTEGRATED NETWORK MANAGEMENT SYSTEM INTERNET PROTOCOL INTERMEDIATE SYSTEM INTERMEDIATE SYSTEM IN-SERVICE NORMAL INTERNATIONAL TELECOMMUNICATIONS UNION PATH TRACE BYTE WITHIN SDH OVERHEAD – REGENERATOR SECTION PATH TRACE BYTE WITHIN SDH OVERHEAD - MULTIPLEXER SECTION LINK AGGREGATION GROUP LOCAL AREA NETWORK LINK ACCESS PROTOCOL ISDN LINK CAPACITY ADJUSTMENT SCHEME LINK CAPACITY PROTOCOL LIGHTWEIGHT DIRECTORY ACCESS PROTOCOL LINE MODULE, STM-1/4 INTERFACE MODULES. LINE MODULE, 2 X PORTS, STM-64 INTERFACE MODULES. LINE MODULE, 8 X PORTS, STM-1/4/16 INTERFACE MODULES. LOSS OF POINTER LOSS OF SIGNAL LONG REACH (1310NM) CN4200 SIX-PORT MODULE CN4200 SIX-PORT MODULE MICRO CHASSIS MANAGEMENT INFORMATION BASE METHOD OF PROCEDURE MULTIPLEXOR SECTION METRO SWITCHING MANAGER MULTIPLEXOR SECTION PROTECTION VARIABLE MULTIPLEXER NOT APPLICABLE NETWORK ASSURANCE LABORATORY (BT) NORTH-BOUND INTERFACE NODE CONTROLLER NODAL CONTROL PROCESSOR NETWORK CONTROL SYSTEM NETWORK DISCOVER PROTOCOL NETWORK ELEMENT NATIONAL FIRE PROTECTION ASSOCIATION NETWORK OPERATION CENTER NOT SERVICE AFFECTING NETWORK TIME PROTOCOL OPTICAL AMPLIFIER - FIXED OPERATION, ADMINISTRATION, MAINTENANCE & PROVISIONING OPERATION, ADMINISTRATION, MAINTENANCE & PROVISIONING

DELETE-NETWORK-MOP.DOC.

O-APS OAV OC OCH OCM ODF ODU OE10 OLA OM 10G OM 2.5G OM 622M OM OMS ON-C OOS-MA OPM OPS OPVC OSC OSPF OSRP OTN OTS OTU OTU-1 OTU-2 OTU-2E PAF PALM PC PDU PM PPP PRBS PSM PST. PTP RDI REV. RNE ROADM RS RS RSA

OPTICAL – AUTOMATIC PROTECTION SWITCH OPTICAL AMPLIFIER - VARIABLE ON-CENTER OPTICAL CHANNEL OPTICAL CHANNEL MONITOR OPTICAL DISTRIBUTION FRAME OPTICAL DATA UNIT OPTICAL ETHERNET 10G OPTICAL LINE AMPLIFIER OPTICAL MODULE 10G OPTICAL MODULE 2.5G OPTICAL MODULE 622M OPTICAL MODULE OPTICAL MULTIPLEX SECTION ON-CENTER OUT OF SERVICE MANAGEMENT OPTICAL POWER METER OPTICAL PROTECTION SWITCH OPTICAL PATH VIRTUAL CONTAINER OPTICAL SUPERVISORY CHANNEL OPEN SHORTEST PATH FIRST OPTICAL SIGNALLING ROUTING PROTOCOL OPTICAL TRANSPORT NETWORK OPTICAL TRANSMISSION SECTION (ITU-T G. 709 TERMINOLOGY) OPTICAL TRANSPORT UNIT OPTICAL TRANSMISSION UNIT -1 (2.7GBPS) OPTICAL TRANSMISSION UNIT -2 (10.7GBPS) OPTICAL TRANSMISSION UNIT - 2 (EXTENDED) PAF PACKET LINE MODULE PERSONAL COMPUTER POWER DISTRIBUTION UNIT PERFORMANCE MANAGEMENT/MONITORING POINT TO POINT PROTOCOL PSEUDO RANDOM BINARY SEQUENCE PROTECTION SWITCHING MODULE (FOR THE O-APS) PRIMARY STATE PHYSICAL TERMINATION POINT REMOTE DEFECT INDICATION REVISION REMOTE NETWORK ELEMENT RE-CONFIGURABLE OPTICAL ADD DROP MULTIPLEXER REGENERATOR SECTION REGIONAL SOLUTION RSA (AFTER RIVEST SHAMIR ADLEMAN) DATA SECURITY, A RECOGNIZED CRYPTOGRAPHY

RU RX

RACK UNIT RECEIVER

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 10 OF 14

SA SASM SC SD SDH SF SFP SIP SLA SLM SM SMN SMS SN SNC SNCP SNE SNMP SONET SPIR SR SRC. SRD SSM SST STM STM-1 STM-16 STM-64 STS-N SVCT SW SX

SERVICE AFFECTING SYSTEMS ACCESS SECURITY MANAGEMENT SHELF CONTROLLER SIGNAL DEGRADE SYNCHRONOUS DIGITAL HIERARCHY SIGNAL FAIL SMALL FORM-FACTOR PLUGGABLE SOFTWARE INSTALLATION PACKAGE SERVICE LEVEL AGREEMENT SERVICE LAYER MANGER SWITCHING MODULE SWITCHING MANAGEMENT SERVICE MANAGEMENT SUITE SUBTENDED NETWORK SUB NETWORK CONNECTION SUB NETWORK CONNECTION PROTECTION SUB (SYSTEM) NETWORK ELEMENT SIMPLE NETWORK MANAGEMENT PROTOCOL SYNCHRONOUS OPTICAL NETWORK SYSTEM PROVING INCIDENT REPORT SHORT REACH SOURCE SOFTWARE RELEASE DOCUMENT SYNCHRONIZATION STATUS MESSAGE SECONDARY STATE SYNCHRONOUS TRANSPORT MODULE SYNCHRONOUS TRANSPORT MODULE 1 (155.52 MB/S) SYNCHRONOUS TRANSPORT MODULE 16 (2.5GB/S) SYNCHRONOUS TRANSPORT MODULE 64 (10GB/S) SYNCHRONOUS TRANSPORT SIGNAL N SINGLE VENDOR CONFORMANCE TEST SOFTWARE SHORT REACH (850NM)

TAP TBA TBD TC TCA TFTP TID TIP TL1 TM TM TMN TOP TP TR TSL TU&T TX T-XCVR TXN UOG USEPA VA VCN VER. VLAN VOA WAN PHY WAN WDM WSS WTR XCVR XFPS

TEST ACCESS POINT TO BE ALLOCATED TO BE DEFINED TEST CASE THRESHOLD CROSSING ALARM TRIVIAL FILE TRANSFER PROTOCOL TARGET IDENTIFICATION TECHNOLOGY INTRODUCTION PROCESS (BT UPGRADE QUALITY) TRANSITION LANGUAGE 1 TIMING MODULE TRADEMARK TRANSPORT MANAGEMENT NETWORK TECHNICAL OPERATING PROCEDURES TEST PLAN TEST REPORT TELNET SECURE LAYER TURN-UP & TEST TRANSMITTER TRANSCEIVER TRANSPORT NETWORK ELEMENT UNIVERSAL OSS (OPERATIONAL SUPPORT SYSTEM) GATEWAY UNITED STATES ENVIRONMENTAL PROTECTION AGENCY VARIABLE ATTENUATOR VIRTUAL CONTAINER N VERSION VIRTUAL LOCAL AREA NETWORK VARIABLE OPTICAL ATTENUATORS WIDE AREA NETWORK PHYSICAL WIDE AREA NETWORK WAVE DIVISION MULTIPLEXING WAVELENGTH SWITCH SELECTOR WAIT TO RESTORE TRANSCEIVER X FORM-FACTOR PLUGGABLE

END OF ABBREVIATIONS

DELETE-NETWORK-MOP.DOC.

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 11 OF 14

1

INTRODUCTION

1.1 OVERVIEW THE AIM OF THIS DOCUMENT IS TO PROVIDE INTEROUTE WITH A WORKAROUND PROCEDURE FOR DELETING NETWORK NODES FROM ESM. THERE IS CURRENTLY A PROBLEM WITH DELETING 5305 AND 5150 DEVICES FROM ESM. CURRENTLY WHEN 5150 AND 5305 DEVICES ARE DELETED FROM ESM SOME INFORMATION IS LEFT BEHIND IN THE DATABASE. THIS MEANS THAT REDISCOVERY OF DELETED

5305 AND 5150 NODES ARE BLOCKED.

1.2 DOCUMENT CONVENTIONS Notes and warnings are highlighted with the NOTE and CAUTION symbols: CAUTION IS USED TO ADD MORE DETAILED EXPLANATION RELATING TO CERTAIN STEPS.

NOTE: IS USED TO ADD MORE DETAILED EXPLANATION RELATING TO CERTAIN STEPS.

1.3 PRODUCT SUPPORT INFORMATION

1.3.1 THIS PROCEDURE APPLIES TO ESM 5.5.1 R 33 ONLY.

1.4 PROCEDURE WHEN DELETING NETWORK ELEMENTS FROM 5.5.1 R 33 AND THE NETWORK ELEMENT BEING DELETED IS A 5150 OR A CN5305 LINKED TO A 5305 THEN IT IS NECESSARY TO DELETE LINKS AND CHASSIS SEPARATELY. DO NOT RELY ON ‘DELETE OBJECT AND TRACES FROM THE NODE ALONE. FOR EXAMPLE TO DELETE AN UDIVIDUAL 5305;/5150 IN THE NETWORK:TO DELETE A LINK RIGHT CLICK ON LINK(S) ONE AT A TIME AND SELECT ‘DELETE OBJECT AND TRACES’

DELETE-NETWORK-MOP.DOC.

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 12 OF 14

AND THEN DELETE THE NODE REQD TO DELETE SELECT THE CHASSIS AND THEN SELECT ‘DELETE OBJECT AND TRACES’

IT IS RECOMMENDED TO NOT RELY ON RIGHT CLICKING A NODE AND SELECTING DELETE OBJECT AND TRACES TO DELETE CHASSIS AND LINKS WHEN REMOVING 5305 OR 5150 FROM THE MAPVIEW. IF THIS IS NOT DONE IN THE ORDER DESCRIBED THEN THERE IS A DANGER THAT THE DELETED DEVICES WILL NOT REAPPEAR ON REDISCOVERY CORRECTLY.

DELETE-NETWORK-MOP.DOC.

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 13 OF 14

THE ONLY OTHER WORKAROUND IS RE-INIT THE DATABASE IF THESE DEVICES ARE NOT REDISCOVERED AND REDISCOVER THE NETWORK.

END OF SOFTWARE REVERSION PROCESS. END OF MOP

DELETE-NETWORK-MOP.DOC.

CIENA CONFIDENTIAL AND PROPRIETARY.

PAGE 14 OF 14