Huawei Ma5600

Huawei Integrated Access Software (MA5600). Copyright(C) Huawei Technologies Co., Ltd. 2004-2012. All rights reserved. >>User name:root >>User password: Username or password invalid. >>User name:admin >>User password: Username or password invalid. >>User name:root >>User password: ----------------------------------------------------------------------------User last login information: ----------------------------------------------------------------------------Access Type: Telnet IP-Address : 200.11.174.108 Time : 2012-10-29 02:41:26 --------------------------------------------------------------------------------------------------------------------------------------------------------User fail login information: ----------------------------------------------------------------------------Access Type IP-Address Time Login Times ----------------------------------------------------------------------------Telnet 200.11.174.108 2012-10-29 02:55:51 7 ----------------------------------------------------------------------------MA5600_LAB_V3R3C05> ! SECURITY MINOR 2012-10-29 02:55:58 EVENT NAME :The maintenance user's status has changed PARAMETERS :User name: root, Login mode: Telnet, IP: 200.11.174.108, State: Log on MA5600_LAB_V3R3C05>enable MA5600_LAB_V3R3C05#display line operation board 0/0 { || }: Command: display line operation board 0/0 It will ta e several minutes, and console may be timeout, please use command idle-timeout to set time limit Are you sure to continue? (y/n)[n]:y MA5600_LAB_V3R3C05# ---------------------------------------------------------------------------Xdsl UpNoise DwNoise Up Stream Dw Stream MaxUp MaxDw UpOut DwOut Up Dw Port Margin Margin attenuate attenuate Rates Rates Power Power Rates Rates ---- ------- ------- --------- --------- ----- ----- ----- ----- ----- ----6 11.5 6.6 0.5 3.0 1203 23180 1.6 14.3 1020 21639 ---------------------------------------------------------------------------Notice: The port not displayed is not activated MA5600_LAB_V3R3C05#config MA5600_LAB_V3R3C05(config)#interface adsl { frameid/slotid<S> }: Command: interface adsl

^ % Incomplete command, the error locates at '^' MA5600_LAB_V3R3C05(config)#interface adsl 0/0 MA5600_LAB_V3R3C05(config-if-adsl-0/0)#deactivate 6 MA5600_LAB_V3R3C05(config-if-adsl-0/0)# Deactivate port 6 successfully MA5600_LAB_V3R3C05(config-if-adsl-0/0)# ! RUNNING WARNING 2012-10-29 02:58:46 EVENT NAME :The ADSL port is manually deactivated. PARAMETERS :FrameID: 0, SlotID: 0, PortID: 6 MA5600_LAB_V3R3C05(config-if-adsl-0/0)#activate 6 profile-index 27 MA5600_LAB_V3R3C05(config-if-adsl-0/0)# Send the command to activate port 6 successfully MA5600_LAB_V3R3C05(config-if-adsl-0/0)#quit MA5600_LAB_V3R3C05(config)#quit MA5600_LAB_V3R3C05#display adsl line-profile { |profile_index<1,1002> }: Command: display adsl line-profile -----------------------------------------------------------------------------Profile Profile Operating Channel Min Down Max Down Min Up Max Up Index Name Mode Mode Rate Rate Rate Rate -----------------------------------------------------------------------------1 DEFVAL All Interleaved 32 6144 32 640 20 XDSL-128-2 All Interleaved 256 2048 64 128 MB 21 256 _256 All Interleaved 32 256 32 256 22 XDSL-512-2 All Interleaved 256 2048 64 512 MB 23 XDSL-512-3 All Interleaved 256 3072 64 512 MB 24 XDSL-512-5 All Interleaved 256 5120 64 512 MB 25 XDSL-1024- All Interleaved 256 5120 64 1024 5MB 26 XDSL-1024- All Interleaved 256 8192 64 1024 8MB 27 XDSL-1024- All Interleaved 256 24576 64 1024 24MB 28 XDSL-2048- All Interleaved 256 24576 64 2048 24MB 29 XDSL-4096- All Interleaved 256 24576 64 4096 24MB 30 512 _512 All Interleaved 32 512 32 512 31 512 _1M All Interleaved 32 1024 32 512 32 XDSL-512-8 All Interleaved 256 8192 64 512 MB 1000 ADSL LINE All Fast 32 6144 32 640 PROFILE 10 00

1001 ADSL LINE All Interleaved 32 6144 32 640 PROFILE 10 01 1002 ADSL LINE All Interleaved 32 24544 32 1024 PROFILE 10 02 -----------------------------------------------------------------------------Total: 17 Note : The unit of rate is Kbps MA5600_LAB_V3R3C05# MA5600_LAB_V3R3C05#display line operation board 0/0 { || }: Command: display line operation board 0/0 It will ta e several minutes, and console may be timeout, please use command idle-timeout to set time limit Are you sure to continue? (y/n)[n]:y MA5600_LAB_V3R3C05# ---------------------------------------------------------------------------Xdsl UpNoise DwNoise Up Stream Dw Stream MaxUp MaxDw UpOut DwOut Up Dw Port Margin Margin attenuate attenuate Rates Rates Power Power Rates Rates ---- ------- ------- --------- --------- ----- ----- ----- ----- ----- ----6 12.5 7.0 0.5 3.0 1220 23408 1.7 14.3 1020 21731 ---------------------------------------------------------------------------Notice: The port not displayed is not activated MA5600_LAB_V3R3C05#config MA5600_LAB_V3R3C05(config)#interface adsl 0/0 MA5600_LAB_V3R3C05(config-if-adsl-0/0)#deactivate 6 MA5600_LAB_V3R3C05(config-if-adsl-0/0)# Deactivate port 6 successfully MA5600_LAB_V3R3C05(config-if-adsl-0/0)# ! RUNNING WARNING 2012-10-29 03:01:27 EVENT NAME :The ADSL port is manually deactivated. PARAMETERS :FrameID: 0, SlotID: 0, PortID: 6 MA5600_LAB_V3R3C05(config-if-adsl-0/0)#activate 6 profile-index 32 MA5600_LAB_V3R3C05(config-if-adsl-0/0)# Send the command to activate port 6 successfully MA5600_LAB_V3R3C05(config-if-adsl-0/0)#quit MA5600_LAB_V3R3C05(config)#quit MA5600_LAB_V3R3C05#display line operation board 0/0 { || }: Command: display line operation board 0/0 Failure: Port is not active

MA5600_LAB_V3R3C05# MA5600_LAB_V3R3C05#display line operation board 0/0 { || }: Command: display line operation board 0/0 It will ta e several minutes, and console may be timeout, please use command idle-timeout to set time limit Are you sure to continue? (y/n)[n]:y MA5600_LAB_V3R3C05# ---------------------------------------------------------------------------Xdsl UpNoise DwNoise Up Stream Dw Stream MaxUp MaxDw UpOut DwOut Up Dw Port Margin Margin attenuate attenuate Rates Rates Power Power Rates Rates ---- ------- ------- --------- --------- ----- ----- ----- ----- ----- ----6 29.5 7.0 0.5 3.0 1245 23796 1.4 14.3 509 8192 ---------------------------------------------------------------------------Notice: The port not displayed is not activated MA5600_LAB_V3R3C05#