Loading documents preview...
FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY TEKNOLOGI MARA (UiTM)
INDIVIDUAL ASSESSMENT FORM OCCUPATIONAL SAFETY AND HEALTH (MEM 603)
INDIVIDUAL ASSIGNMENT - ACCIDENT INVESTIGATION OBJECTIVE:
COURSE OUTCOME (CO)
PROGRAM OUTCOME (PO)
Identify ethical principles and commit to professional ethics and responsibilities and norms of engineering practice. [PO8 LO6];{A4}.
PO8 Ethics - Apply ethical principles and commit to professional ethics and responsibilities and norms of engineering practice (WK7);
ASSIGNMENT GUIDELINES 1. Select a particular Case Study as listed in Appendix 1. 2. Imagine you are safety officer, you received the information regarding the accident as listed in Appendix 1. 3. Part A- You are required to explain each step in order to carry out the accident investigation with professionally ethics, fill the suitable form and prepare the accident report. 4. Part B- Provide suggestions for preventive action, especially in term of engineering control in order to avoid similar accidents happen in the company. (supported with relevant photo/technical diagrams/drawings/ form) 5. Part C- Identify the ethical principles and professional ethics exist/ potential to happen to the case study that you have chosen. Example: construction industry – ethical issues: corruption, materials used are out of specification etc.
REPORT 1. Prepare your report with the details of all the tasks. 2. The report should include part A, B and C. 3. The explanation of accident investigation and preventive action should be supported with relevant photo/technical diagrams/drawings/ form. 4. Provide suggestions for preventive action, especially in term of engineering control in order to avoid similar accidents happen in the company. 5. Identify the ethical principles and professional ethics exist/ potential to happen to the case study that you have chosen. Example: construction industry – ethical issues: corruption, materials used are out of specification etc.
UPDATED on December 2, 2019
FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY TEKNOLOGI MARA (UiTM)
INDIVIDUAL ASSESSMENT FORM OCCUPATIONAL SAFETY AND HEALTH (MEM 603)
Appendix 1
DOWNLOAD: Fatal Accident Case FROMhttp://www.dosh.gov.my/index.php/en/fatal-accident-case
UPDATED on December 2, 2019
FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY TEKNOLOGI MARA (UiTM)
INDIVIDUAL ASSESSMENT FORM OCCUPATIONAL SAFETY AND HEALTH (MEM 603) LECTURER NAME
DUE DATE
SUBMISSION DATE
REMARKS
Ir. Dr. Noriah Yusoff
-on time/- late
GROUP NO No 1
Name
GENERAL GUIDELINES:
Student ID
LEVEL
POOR
Scale
1-2
Assessment Criteria
(Report)
Introduction
MARGIN AL 3-4
ACCEPTAB LE 5,6
Weight (w)
GOOD 7,8
Scale (y)
EXCELLEN T 9,10
Total= w * y
10
Content/ Diagrams/Figures/ Discussion and Conclusion Part A- Accident Investigation
40
Part B- Preventative Action
20
Part C - Identification
20
Format, Language and Organization,
10
References and citation TOTAL
100%
REMARKS: FATAL ACCIDENT CASES IN 2018 FOR GROUP EMD7M4A
UPDATED on December 2, 2019
FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY TEKNOLOGI MARA (UiTM)
INDIVIDUAL ASSESSMENT FORM OCCUPATIONAL SAFETY AND HEALTH (MEM 603)
RUBRIC ASSESSMENT-REPORT GENERAL GUIDELINES:
Scale Criteria
LEVEL
POOR
Scale
1-2 1-2 Poor
Topic is poorly Introduction introduced. Lack of understanding on the topic. Contents Part A-C
Research Result
Topic is poorly discussed. Lack/ absent of supporting evidence.
MARGIN AL 3-4 3,4 Margin al
ACCEPTAB LE 5,6
5,6 Acceptable
Topic is fairly introduced. Moderately understand on the topic. Fairly general research on the concept and its applications. Some supporting evidence is provided.
GOOD
EXCELLENT
7,8 7,8 Good
9,10 9-10 Excellent
Topic is well introduced.Clearly explain on the topics. Well and thorough research in the concept and its applications. Effective supporting evidence is provided. Able to make use of all relevant and available resources effectively Receptive to new ideas, critics, suggestions and able to act accordingly Show strong interest and curiosity in acquiring new knowledge and expanding it to new horizon through resource utilization. Many resources explored Sources of reference are well cited with complete explanation of tables and figures
Inadequate use of resources Not receptive to new ideas and unable Utilization of to utilize them resources Lack of interest References and curiosity in and citation acquiring new knowledge Not many resources explored Inadequate or no citation of resources
Adequate use of resources Receptive to some new ideas and partially able to act autonomously Show interest and curiosity in acquiring new knowledge and expanding it through new resources utilization Adequately cite all references
Conclusion
Unclear conclusion of the topic.
Topic is fairly concluded.
Topic is well concluded.
Writing is disorganized, unfocused to the main theme and disconnected. Not following the required format of presentation.
Writing is found to be in accordance with course requirements and have some focus on discernible theme and supporting details.
Writing is well organized and covered relevant to the course requirements and topics for discussions. Each sub-topic is clear and well structured.
Organizati Format on
Language Writing
Writing lacks clear sentences and paragraphs. Deficiencies in good grammatically skill witting.
Writing skills are somehow clear and paragraphs are well structured. Less grammar mistakes
Factor
Excellent writing skills in the use of words and prefect grammar. Sources of reference are well cited with complete explanation of tables and figures
UPDATED on December 2, 2019
FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY TEKNOLOGI MARA (UiTM)
INDIVIDUAL ASSESSMENT FORM OCCUPATIONAL SAFETY AND HEALTH (MEM 603)
APPENDIX 1 http://www.dosh.gov.my/index.php/en/fatal-accident-case 2018: FATAL ACCIDENT CASES REPORTED BY DEPARTMENT OF OCCUPATIONAL SAFETY AND HEALTH (DOSH) MALAYSIA NO
DATE
TITLE CASE
LOCATION
SUMMARY CASE
OBSERVATION
STUDENT ID
NAMA PELAJAR
1
1/04/2018
Died being hit by lorry
Construction site, Johor
A general workers being ran over by a lorry. He died on the scene
i. No SOP ii. Failure to provide a safe workplace to its staff
2016218454
ADRY BIN ABDUL RAHIM
2
1/09/2018
Died falling from height
Palm Oil Mill, Pahang
a general worker had fell from the height of 12 meter as he was repairing the roof
i) victim did not wear safety harness when working at height ii) no supervision from the employer
2017806724
AHMAD AJMAL BIN RAMLAN
3
2/09/2018
Died, exposed to Rotary's machine blade
Timber factory, Kedah
Victim, machine operators died after being slip and fall down to the bottom of the machine while cleaning was done at the top of the Rotary machine
i. No HIRARC for the activity ii. No SOP for the activity iii. Fail to provide training iv. Fail to report the accident immediately . Fail to appoint SHO
2016218526
AHMAD HAZIQ DANIAL BIN YUSAINI
4
4/10/2018
Died falling from height
Construction site, Selangor
The victim, a subcontractor worker died after falling from level 9 while installing aluminium formwork
i. No fence on opening edges. ii. Wrong usage of safety harness iii. Installing and transferring work for working platform not according to method statement
2017665756
AIDA NUR SYAFIQAH BINTI SHAARI
UPDATED on December 2, 2019
FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY TEKNOLOGI MARA (UiTM)
INDIVIDUAL ASSESSMENT FORM OCCUPATIONAL SAFETY AND HEALTH (MEM 603) 5
5/10/2018
Died being caught by bracket conveyor
Plantation, Johor
Victim, a plantation worker died after caught by bracket conveyor while doing cleaning work in the conveyor area
i. No SOP for conveyor maintenance works ii. Tiada HIRARC kerja berkaitan iii. Gagal mengadakan latihan, arahan dan maklumat iv. Gagal mengadakan tempat kerja yang selamat
2016218546
AIDIL FADHILAF BIN AWANG
6
6/09/2018
Died falling from height
Construction site, Pulau Pinang
a general worker had fell from level 6 as he was walking the scaffold's temporary ladder
i) unsafe access to the temporary ladder ii) wall opening was not properly covered
2017806526
AINA BALQIS BINTI AZRIN
7
7/06/2018
Died due to explosion
Construction site, Johor
A worker died as a result of explosion incident as he was unlocking cabinet. His body was found 35 feet from the scene
i. No SOP ii. No HIRARC
2017806412
AINUL MUSTAQIM BIN ABDUL MUTTALIB
8
7/07/2018
Died being ran over by lorry
Construction site, Sarawak
There was an accident between lorry from construction site and a car. Car driver, a civilian was died in that accident
the car found to be speedy
2017806616
AISYAH MAISARAH BINTI EPANDI
9
8/06/2018
Died falling from height
Construction site, Sabah
A subcontractor's worker died as he fallen down at the height of approximately 22 meters. He was doing formwork
i) Improper use of working platform ii) No PPE iii) Scaffold installation is not according to specification.
2017806542
ALIFF ZHARFAN BIN AZIZUL RAHIM
UPDATED on December 2, 2019
FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY TEKNOLOGI MARA (UiTM)
INDIVIDUAL ASSESSMENT FORM OCCUPATIONAL SAFETY AND HEALTH (MEM 603) 10
8/10/2018
Died being crushed by container
Transportation , Selangor
Victim, a lorry driver died after being crushed by a fell container during the container transferring process.
i. Safety pin (twist lock container) did not fit properly to tie up the container. ii. The container slid down because Road condition is not smooth and high. iii. Fail to show training records for the operator. iv. Fail to report the accident to DOSH
2016218438
AMIER DANIAL BIN NOR AZIZI
11
9/01/2018
Died falling from height
Construction site, Kuala Lumpur
A construction worker died after falling from level 3 and subsequently crushed by concrete and scaffolding
No safe working procedure and Method Statement with regards to the supervision of construction and stability support
2017806386
ASYRAF BIN ABDUL RAHIM
12
9/10/2018
Died, road accident
Cleaning Company, Kedah
Victims, a waste collection crew were killed in a road accident after the victim truck collided with tipper truck on the sidewalk.
The victim's truck collided with a tipper truck lying on the side of the road which resulted in the death of the victim and 3 other victims of the injured
2017806392
ERIK SHAH BIN LILI MURAD
13
9/10/2018
Died falling from height
Construction, Melaka
The victim, a subcontractor was killed after falling at the height of 8 meters into the sewer hole.
i. No SOP for sewerage construction ii. No SOP for rescue works in sewer hole if there is emergency. iii. No training to workers for sewerage activity iv. No valid CF for the hoisting machineries.
2017806632
EZAT QUDRAT BIN NOOR EFFENDY
UPDATED on December 2, 2019
FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY TEKNOLOGI MARA (UiTM)
INDIVIDUAL ASSESSMENT FORM OCCUPATIONAL SAFETY AND HEALTH (MEM 603) 14
10/12/2018
Died falling from height
Factory, Penang
sub-contracted worker died after falling with a forklift engine from a height of 40 feet
Forklift used several times on the day of the event to easily unload the goods using the platform as a lifting equipment.
2016229514
FARIS AFIQ BIN SALLEHUDIN
15
11/08/2018
Died falling from height
Construction site, Pahang
A construction worker died due to fell from floor 39 to 3rd floor as he was performing cleaning jobs on cantilever platform
Walls opening was not covered
2016218598
IBRAHIM DASUQI BIN SUDIN
16
11/10/2018
Died, crushed by excavator
Plantation, Selangor
IKMAL HISHAM BIN ZAINOL
11/12/2018
6 dead workers in a fire
Stor, Perak
i. No safety belt in excavator sitting seat. ii. No HIRARC and NO SOP for excavator operation The workplace was found to store items for events on the ground floor and store explosives and fireworks for the purpose of the upstart event
2017806698
17
The victim, a subcontractor worker died after fall and crushed by excavators bucket. 6 workers were killed in a fire at items storage
2017806612
MOHAMAD AFIQ BIN AHMAD
18
13/07/2018
Died falling from height
Factory, Selangor
Victim, a production supervisor has died due to falling from height
unsafe scaffold use
2017806288
MOHAMAD HAFSHAM BIN MAZLAN
19
16/07/2018
Died falling from height
Construction site, Melaka
A construction worker has died after he fell down from 7th floor. He was carried down scaffold during incident
i) no record on training for working at height ii) not wearing PPE
2016218544
MOHAMAD RAHIMAN BIN MUSTAPHA
UPDATED on December 2, 2019
FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY TEKNOLOGI MARA (UiTM)
INDIVIDUAL ASSESSMENT FORM OCCUPATIONAL SAFETY AND HEALTH (MEM 603) 20
16/12/2018
Died, electric shock
Factory, Sarawak
sub-contractor were killed when washing shoes at Washing Bay using 'water jet
i. The OM Material (SB) has disturbed the scene by removing the fuse boxes and all existing electrical wires.
2017687192
MOHAMMAD FITRI AMAR BIN MOHD NAZRI
21
17/06/2018
Died falling from height
University, Kedah
Victim was a contract worker involving with the pest control job. He was found dead due to fall from level 4
i. No SOP. ii. Tiada HIRARC. iii. Did not wear any PPE
2016218404
MUHAMAD AMIR HAIKAL BIN MOHD ZAINUDIN
22
18/09/2018
Died, crushed by tractor
Plantation, Perak
The victim, lawn tractor driver was trapped inside the tractor after the tractor overturned in a 10-feet drain
i. HIRARC need to recheck. ii. SOP need to recheck.
2016218292
MUHAMMAD ASYRAF BIN KAMIL HAMZAH
23
18/09/2018
Died, crushed by excavator
Construction, Sarawak
General worker died after the machine operate by victim crushed by overturned excavator while down the slope.
2016229324
MUHAMMAD HAZIQ BIN MOHD PAZLI
24
19/08/2018
Died being caught in an rotating machine
Quarry, Sarawak
a worker has died due to his hand being caught in a machine as he tried to remove residual using scoop shovel
i. No site registration number (construction site) ii. Fail to produce SOP iii. Fail to produce training records. iv. Fail to produce PPE records i) No SOP for maintenance activity ii) No record on training iii) no record of conducting HIRARC
2016229528
MUHAMMAD HAZIQ BIN MOHD. AWANG
UPDATED on December 2, 2019
FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY TEKNOLOGI MARA (UiTM)
INDIVIDUAL ASSESSMENT FORM OCCUPATIONAL SAFETY AND HEALTH (MEM 603) 25
19/10/2018
Died, electric shock
Jetty, Sarawak
The victim operator of sand barge, falls into the river after being hit by electric shock during the work of sucking water out of the barge using an 'electric water pump'
"i The sand barges have not been at the jetty, believed to have been out of sand dredging. ii. 'Electric water pump' and electrical connections are on board. "
2016218406
MUHAMMAD SYAFIQ SYAZWAN BIN MOHD FAIZAL
26
20/04/2018
Died falling from height
Factory, Johor
i. No safe working procedure for working at height ii. No HIRARC at work iii. No SHO and SHC
2017806798
MUHAMMAD WA'IE AZFAR BIN ISHAK
27
20/07/2018
Killed by falling bricks
Construction site, Melaka
NURDALILAH BINTI NOORDIN
20/12/2018
Died falling from height
Construction, Johor
i. No SOP for lifting works ii. No SOP for working at height Employer fails to report accident to DOSH
2017806758
28
The victim fell at a height of 10 meters when the roof supports were broken. He is passing through PVC during incident A construction workers has died after being hit by falling bricks A construction worker died after 17 days of receiving treatment at the Sultan Ismail Hospital. Victims are suspected of falling from 1st floor at construction site.
2017806814
NURHAFIZIN ZIKRY BIN MOHD NORDIN
29
21/10/2018
Died, crushed by brick wall
Construction site, Selangor
The tower crane operator died after a brick wall collapse and crushed the victim while on the way to the 7th floor 'resting area'.
i. The brick wall work was not fully assembled and there is no stiffener or support to support the brick wall
2017806646
NURUL SYAFIQAH BINTI ZABIDI
30
21/11/2018
Died falling from height
construction, Selangor
A helper at construction site falling from a height of 15 meters high when it bore iron rebates to a crane sling
i. Failure to observe SOP. ii. Existing HIRARC failures for truck operator risk for loadlifting activities
2017806838
SHARIFAH SHAHIRAH BINTI TUAN AZAM
UPDATED on December 2, 2019
FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY TEKNOLOGI MARA (UiTM)
INDIVIDUAL ASSESSMENT FORM OCCUPATIONAL SAFETY AND HEALTH (MEM 603) 31
21/12/2018
Dies ,stuck at conveyor
Factory, Perak
A general worker died after being caught in a conveyer machine. The victims are suspected of climbing the wall of the conveyer and slip into the conveyer '
Employer fails to document a SOP for entry or maintenance work in the 'conveyer'
2017806746
SYED IKMAL HADI BIN SYED SHAHARUDDIN
32
21/12/2018
Died falling from height
Factory, Perak
Sub-contractor worker died after falling at a height of 7 meters during the work of roof replacement.
i. Employer fails to provide secure work system for related work ii. No SOP working in height iii. No supervision and supervision of the employer iv. There is no training for working at height
2017806694
SYEIKH ABDUL AZIZ BIN SYEIKH AHMAD RIDHOUDHI
UPDATED on December 2, 2019