Thermal Curve For Overload Heaters: Etap Knowledge Base

ETAP Knowledge Base

Thermal Curve for Overload Heaters Description: The Thermal Curve of the Overload Heaters does not show on the TCC plot for ETAP 7.0.0. Category:

Overload Heaters

Type:

Information

Keywords:

Overload Heaters, Thermal Curve, ETAP 7.0.0, TCC, STAR

Q: Why doesn’t the Thermal Curve show on the TCC plot? A: The Overload Heater curve shows on the TCC plot if it was selected from the library. If it was not selected from the library and the Thermal curve has been checked, then the curve will not show on the TCC plot. In ETAP 7.1.0, if the Thermal check box has been checked, then the curve will show in the TCC plot.

This document is confidential and proprietary to Operation Technology, Inc. and may not be reproduced, published or disclosed to others without the written authorization of Operation Technology, Inc., 17 Goodyear, Suite 100, Irvine, CA 92618, USA. © 2010 by Operation Technology, Inc. All Rights Reserved.

© Operation Technology, Inc.

Page 1 of 2

ETAPKB

ETAP Knowledge Base

Thermal Curve for Overload Heaters

This document is confidential and proprietary to Operation Technology, Inc. and may not be reproduced, published or disclosed to others without the written authorization of Operation Technology, Inc., 17 Goodyear, Suite 100, Irvine, CA 92618, USA. © 2010 by Operation Technology, Inc. All Rights Reserved.

© Operation Technology, Inc.

Page 2 of 2

ETAPKB